SHOWTEC Phantom 575 Pro EB Product guide

Club Spot 575
ORDERCODE 40135
Congratulations!
You have bought a great, innovative product from Showtec.
The Showtec Club Spot 575 brings excitement to any venue. Whether you want simple plug-&-play action or
a sophisticated DMX show, this product provides the effect you need.
You can rely on Showtec, for more excellent lighting products.
We design and manufacture professional light equipment for the entertainment industry.
New products are being launched regularly. We work hard to keep you, our customer, satisfied.
For more information: iwant@showtec.info
You can get some of the best quality, best priced products on the market from Showtec.
So next time, turn to Showtec for more great lighting equipment.
Always get the best -- with Showtec !
Thank you!
Showtec
Showtec Club Spot 575™ Product Guide
Warning..…...................................................................................…………………………………………..
Safety-instructions………………………………………………………………………………………….….
Operating Determinations…………………………………………………………………………………….
Rigging………………………………………………………………………………………………………….
2
2
3
4
Description..…..............................................................................……….…………………………………
Features and Overview ………………………………...….……………….………….………………….….
Backside…………………………………………………...…...….……………….…………………...….….
6
6
7
Installation...............................................................................…...…………………………………….…..
Installing the Lamp ........................................................………………………………………..…………
8
8
Set Up and Operation.....................................................................……..……………………………….…
One Club Spot ............................................................................…………………………………………
Multiple Club Spots..............................................................................…………………………………..
9
9
9
DMX-Protocol…...................................................…………………………………………………………….
Control Panel….............……....................................……………………………………………………….
Control Mode........................................………………………………………………………………………
DMX addressing...................................………………………………………………………………………
Functions control panel...................................………………………………………………………………
Stand – alone mode...................................………………………………………………………………….
Master/Slave mode...................................…………………………………………………………………..
Channel settings………………………………………………………………………………………………..
11
13
13
13
14
15
15
15
Rotating Gobowheel, Static Gobowheel and Colorwheel…………….……………..……………………
16
Maintenance...................................................................................………..………….…….………………
Changing the Lamp........................................................................…………………….…………………
Replacing the Fuse........................................................................…………………….…………………
Replacing a Gobo….......................................................................…………………….…………………
17
17
17
18
Troubleshooting............................................................................………………….………………….…..
No Light, No Movement - All Products............................................………………….…………………..
No Response to DMX ....................................................................………………….…………………..
18
18
18
Product Specifications.................................................................……………….…….…………………..
20
1
WARNING
CAUTION!
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY
BEFORE YOUR INITIAL START-UP!
SAFETY INSTRUCTIONS
Every person involved with the installation, operation and maintenance of this device has to:
be qualified
follow the instructions of this manual
CAUTION! Be careful with your operations.
With a dangerous voltage you can suffer
a dangerous electric shock when touching the wires!
Before your initial start-up, please make sure that there is no damage caused by transportation. Should
there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to follow
the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Never let the power-cord come into contact with other cables! Handle the power-cord and all
connections with the mains with particular caution!
Never remove warning or informative labels from the unit.
Never use anything to cover the ground contact.
Never run the device without lamp!
Never ignite the lamp if the objective-lens or any housing-cover is open, as discharge lamps may
expose and emit a high ultraviolet radiation, which may cause burns.
Never lift the fixture by holding it at the projector-head, as the mechanics may be damaged. Always
hold the fixture at the transport handles.
Never look directly into the light source.
Never leave any cables lying around.
Never unscrew the screws of the rotating gobo, as the ball bearing will otherwise be opened.
Do not insert objects into air vents.
Do not connect this device to a dimmerpack.
Do not switch the device on and off in short intervals, as this would reduce the lamp’s life.
Do not touch the device’s housing bare-handed during its operation (housing becomes very hot).
Do not shake the device. Avoid brute force when installing or operating the device.
Only use device indoor, avoid contact with water or other liquids.
2
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Only operate the fixture after having checked that the housing is firmly closed and all screws are
tightly fastened.
Only operate the device after having familiarized with its functions.
Avoid flames and do not put close to flammable liquids or gases.
Always replace the lamp, when it is damaged or deformed due to the heat.
Always keep case closed while operating.
Always allow free air space of at least 50 cm around the unit for ventilation.
Always disconnect power from the mains, when device is not used, before cleaning or when
replacing lamp! Only handle the power-cord by the plug. Never pull out the plug by tugging the
power-cord.
Make sure that the device is not exposed to extreme heat, moisture or dust.
Make sure that the available voltage is not higher than stated on the rear panel.
Make sure that the power-cord is never crimped or damaged. Check the device and the power-cord
from time to time.
If the lens is obviously damaged, it has to be replaced. So that its functions are not impaired, due to
cracks or deep scratches.
If device is dropped or struck, disconnect mains power supply immediately. Have a qualified
engineer inspect for safety before operating.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not
switch it on immediately. The arising condensation water might damage your device. Leave the
device switched off until it has reached room temperature.
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely
(preferably in the original packing material), and return it to your Showtec dealer for service.
For adult use only. Movinghead must be installed out of the reach of children. Never leave the unit
running unattended.
For replacement use lamps and fuses of same type and rating only.
Allow time to cool down, before replacing lamp.
This device falls under protection class I. Therefore it is essential to connect the yellow/green
conductor to earth.
During the initial start-up some smoke or smell may arise. This is a normal process and does not
necessarily mean that the device is defective.
Repairs, servicing and electric connection must be carried out by a qualified technician.
WARRANTY: Till one year after date of purchase.
CAUTION ! EYEDAMAGES !.
Avoid looking directly into the light source.
(meant especially for epileptics) !
OPERATING DETERMINATIONS
This device is not designed for permanent operation. Consistent operation breaks will ensure that the device
will serve you for a long time without defects.
The minimum distance between light-output and the illuminated surface must be more than 1.3 meter.
The maximum ambient temperature ta must never be exceeded.
If this device is operated in any other way, than the one described in this manual, the product may suffer
damages and the warranty becomes void.
Any other operation may lead to dangers like short-circuit, burns, electric shock, lamp explosion, crash etc.
You endanger your own safety and the safety of others!
3
Rigging
Please follow the European and national guidelines concerning rigging, trussing and all other safety issues.
Do not attempt the installation yourself !
Always let the installation be carried out by an authorized dealer !
Procedure:
•
•
•
•
•
If the projector is lowered from the ceiling or high joists, professional trussing systems have to be
used.
Use a clamp to mount the projector, with the mounting-bracket, to the trussing system.
The projector must never be fixed swinging freely in the room.
The installation must always be secured with a safety attachment, e.g. an appropriate safety net or
safety-cable.
When rigging, derigging or servicing the projector, always make sure, that the area below the
installation place is blocked and staying in the area is forbidden.
The Club Spot can be placed on a flat stage floor or mounted to any kind of truss by a clamp.
4
Mounting a clamp to the underside of the club Spot moving head
1) Clamp
2) Safety-cable
3) Eye bolt
4) Mounting plate
Improper installation can cause serious damage to people and property !
Connection with the mains
Connect the device to the mains with the power-plug.
Always pay attention, that the right color cable is connected to the right place.
Cable
Pin
International
BROWN
FASE
L
BLUE
NUL
N
YELLOW/GREEN
EARTH
Make sure that the device is always connected properly to the earth!
5
Description of the device
Features
The Showtec Club Spot 575 is a moving head with high output and great effects.
• 1 Color-wheel with 7 colored gobos, and open
• 1 Gobo-wheel with 2 glass and 5 metal interchangeable rotating gobos plus open
• 1 Static Gobo-wheel with 7 rotating gobos plus open
• DMX-control via standard DMX-controller
• 12 DMX-control channels required
• Strobe-effect with adjustable speed (1 - 10 flashes/sec.)
• Sound-controlled via built-in microphone
• Manual focus
• Pan 0º -- 360º
• Tilt 0º -- 270º
• Lamp HMI 575
• Fuse T10A / 250V
Overview
1
2
3
Fig. 1
1) Lens
2) Display
3) Menu / Select buttons
6
Backside
4
5
6
7
Fig. 2
4) DMX signal connector (OUT)
5) DMX signal connector (IN)
6) IEC power connector
7) ON / OFF
7
Installation
Installing the Lamp
The Showtec Club Spot 575 uses the HMI 575 (ordercode 80901O) reflectorbulb as manufactured by all
popular manufacturers. Use only the appropriate lamp for your unit.
Note that, product versions that use other lamps, may be offered in the future. Check your product
specification label for information.
Always disconnect from electric mains power supply before changing lamps.
The lamp has to be replaced when it is damaged or deformed due to the heat.
Do not install lamps with a higher wattage! Lamps with a higher wattage generate temperatures the
device was not designed for.
Damages caused by non-observance are not subject to warranty.
Procedure :
1. Loosen the 4 screws on the back of the plastic housing.
2. Gently remove the small metal housing. Loosen the 4 screws of the lamp cover.
3. Read lamp instructions. Do not touch the lamp bulb glass. (See Figure 3.)
Oil on hands shortens the lamp life. (If you touch the bulb glass, wipe off the glass with a clean, lint-free
towel and rubbing alcohol.).
4. Insert the lamp pins into the small holes in the lamp socket.
5. Put the lamp cover back and fasten the screws snugly. Then put the metal housing back and fasten the
screws snugly
1
2
3
Fig. 3
8
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
One Club Spot
1. Fasten the moving head onto firm trussing (Use a 30-kg rated or stronger C-clamp fastened onto the
Club Spot ). Leave at least 1 meter on all sides for air circulation.
2. Plug one end of the electric mains power cord into the IEC socket on the unit.
Then plug the other end of the cord into a proper electric power supply socket.
3. Turn on the music. If N1N-N (Audio) is set, then the fixture will react to the beat of the music.
Multiple Club Spots
1. Fasten the effect light onto firm trussing (Use a 30-kg rated or stronger C-clamp fastened onto the
Club Spot ). Leave at least 1 meter on all sides for air circulation.
2. Use a 3-p XLR cable to connect the Club Spots and other devices.
The pins:
1.
2.
3.
Earth
Signal Signal +
3. Link the units as shown in (figure 4), Connect a DMX signal cable from the first unit's DMX "out" socket to
the second unit's "in" socket. Repeat this process to link the second, third, and fourth units.
4. Supply electric power: Plug electric mains power cords into each unit's IEC socket, then plug the other
end of the mains power cord into proper electric power supply sockets, starting with the first unit. Do not
supply power before the whole system is set up and connected properly.
Multiple Club Spots Set Up
DMX-Set up
Master/Slave Set up
Fig. 4
Note : Link all cables before connecting electric power
9
Fig. 5
10
DMX Protocol
Channel 1 – Colours
Linear color change following the movement of the slider. In this way you can stop the color-wheel in any
position – also between two colors creating double-colored beams. Between 128 - 191 and between 192 255, the color-wheel rotates continuously the so-called “Rainbow” effect.
0-7
8-15
16-23
24-31
32-39
40-47
48-55
56-63
64-127
128-191
192-255
Open / white
Peach Blow
Yellow
Light Blue
Red
Green
Pink
Cherry Blue
Color gradual change
Positive Rainbow effect with increasing speed
Negative Rainbow effect with increasing speed
Channel 2 – Rotating Gobo
0-15
16-31
32-47
48-63
64-79
80-95
96-111
112-127
128-191
192-255
Open / white
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6 (Glass Gobo)
Gobo 7 (Glass Gobo)
Positive Rainbow effect with increasing speed
Negative Rainbow effect with increasing speed
Channel 3 –Rotating gobo rotation
0-15
16-135
136-255
Stop
Positive Rainbow effect with increasing speed
Negative Rainbow effect with increasing speed
11
Channel 4 – Static Gobos
0-8
9-15
16-23
24-31
32-39
40-47
48-55
56-63
64-71
72-79
80-87
88-95
96-103
104-111
112-119
120-127
128-191
192-255
Open / white
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Open / white
Gobo 1
Gobo 2
Gobo 3
Gobo 4
Gobo 5
Gobo 6
Gobo 7
Positive Rainbow effect with increasing speed
Negative Rainbow effect with increasing speed
Channel 5 - Horizontal movement (Pan)
Push the slider up, in order to move head horizontally (PAN).
Gradual head adjustment from one end of the slider to the other (0-255, 128-center).
The head can be turned by 360°and stopped at any position you wish.
Channel 6 - Vertical movement (Tilt)
Push the slider, up in order to move head vertically (TILT).
Gradual head adjustment from one end of the slider to the other (0-255, 128-center).
The head can be turned by 270°and stopped at any position you wish.
Channel 7 – Effect Wheel
0-15
16-239
240-255
White
Positive rotation with decreasing speed
Stop
Channel 8 – Focus
0-255
Continuous adjustment from far to near
Channel 9 – Shutter, strobe
0-15
16-128
129-133
134-243
244-249
250-255
Shutter open
Dimmer control
White
Strobe effect from slow to fast
Reset, shutter closed after 5 seconds
Shutter open
Channel 10 – X/Y controllable with decreasing speed
Channel 11 - Pan fine 16 bit
Channel 12 - Tilt fine 16 bit
12
The Club Spot 575 can be operated with a controller in control mode or without the controller in standalone mode.
Control Panel
When the indicator light is on, means the Club Spot is working
Fig. 6
A. Up Button
B. Down Button
C. [MODE] Button
Control Mode
The fixtures are individually addressed
on a data-link and connected to the controller.
The fixtures respond to the DMX signal from the controller. (When you select the DMX address and save it,
the controller will display the saved DMX address the next time.)
DMX Addressing
The control panel on the front side of the base allows you to assign the DMX fixture address, which is the
first channel from which the Club Spot will respond to the controller.
Please note when you use the controller, the unit has 12 channels.
When using multiple Club Spots, make sure you set the DMX addresses right.
Therefore, the DMX address of the first Club Spot should be 1(001); the DMX address of the second Club
Spot should be 1+12=13 (013); the DMX address of the third Club Spot should be 13+12=25(025), etc.
Please, be sure that you don’t have any overlapping channels in order to control each Club Spot correctly.
If two or more Club Spots are addressed similarly, they will work similarly.
)
For address settings, please refer to the instructions under ”Addressing’ (menu
Controlling:
After having addressed all Club Spot fixtures, you may now start operating these via your lighting controller.
Note: After switching on, the Club Spot will automatically detect whether DMX 512 data is received or not. If
there is no data received at the DMX-input, the “LED “ on the control panel will not flash.
The problem may be:
- The XLR cable from the controller is not connected with the input of the Club Spot.
- The controller is switched off or defective, the cable or connector is detective, or the signal wires are
swapped in the input connector.
Note: It’s necessary to insert a XLR termination plug (with 120 Ohm) in the last fixture in order to ensure
proper transmission on the DMX data link.
13
Dmx Mode:
Light 1
DMX Mode:
Light 2
Master Mode:
Sound-control
Slave Mode:
Slave 1
Master Mode:
Slow
Slave-Mode
Slave 2
Master Mode:
Standby
Slave-Mode
Slave 3
Use Time:
Hour
Slave-Mode
Slave 4
Pan Mode:
Positive
Tilt-Mode
Positive
Pan Mode:
Negative
Tilt-Mode
Negative
LED positive:
Display
LED negative
Display
Fig. 7
14
Remotely controllable functions
Colour-wheel
The Club Spot contains a colour-wheel with 7 colours and white. The colour-wheel can be positioned
between two adjacent colours in any position. It is also possible to rotate the colour-wheel continuously at
different speeds ( “Rainbow effect” in both directions).
Rotating gobo-wheel
This rotating gobo-wheel has 5 metal gobos, 2 glass gobos and open.
Static gobo-wheel
This static gobo-wheel has 7 gobos and open.
Shutter/Dimmer/Strobe
The dimming (0-100%) is provided by a simple mechanical shutter unit. This unit may also be used for
strobe effect (1-10 flashes per second).
Stand-alone Mode
The fixtures on a data-link are not connected to the controller, but can execute pre-set programs, which can
be different for every fixture.
To set the program to be played, see the page 10. Stand-alone operation” can be applied to a single fixture
(the fixture may be set to the master/slave mode or controller mode) or to multiple fixture operating
synchronously.
For synchronous operation of multiple fixtures the fixtures must all be connected on a data-link and one of
them is set as a master (master mode) and the rest as slaves (slave mode). The DMX address of all the
and on that particular slave address only one fixture can be connected. To the
slaves are assigned to
).
fixture as the master or slave, see “Addressing” (menu
If the master fixture resets or runs a test (program), all slaves will execute these acts too.
You can’t play or edit any program on a slave, if the master is switched on and connected to the
master/slave chain.
Note: Disconnect the fixtures from the DMX controller before master/slave operating, otherwise data
collisions can occur and the fixtures will not work properly!
It’s necessary to insert the XLR termination plug (with 120 Ohm ) into the input of the master fixture and into
the output of the last slave fixture in the data-link, in order to ensure proper transmission on the data link.
From the master’s control panel it is possible to control any slave in a master/slave chain.
Channels settings
Channel
1
2
3
4
5
6
7
8
9
10
11
12
Colours
Rotating Gobowheel
Gobo Rotation
Static Gobos
Pan
Tilt
Effect wheel
Focus
Shutter, strobe
X/Y controllable
Pan fine 16 bit
Tilt fine 16 bit
15
Gobowheel Static
Gobowheel Rotating
Fig. 8
Fig. 9
Colorwheel
Fig. 10
16
Maintenance
The operator has to make sure that safety-relating and machine-technical installations are to be inspected
by an expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are to be inspected
by a skilled person once a year.
The following points have to be considered during the inspection:
1. All screws used for installing the device or parts of the device have to be tightly connected and must
not be corroded.
2. There may not be any deformations on housings, fixations and installation spots.
3. Mechanically moving parts like axles, eyes and others may not show any traces of wearing.
4. The electric power supply cables must not show any damages or material fatigue.
The Showtec Club Spot 575 requires almost no maintenance. However, you should keep the unit clean.
Otherwise, the fixture’s light-output will be significantly reduced. Disconnect the mains power supply, and
then wipe the cover with a damp cloth. Do not immerse in liquid. Wipe lens clean with glass cleaner and a
soft cloth. Do not use alcohol or solvents.
The front PC lens will require weekly cleaning, as smoke-fluid tends to build up residues, reducing the lightoutput very quickly.
The cooling-fans, colour-filters, the gobo-wheel, the gobos and the internal lenses should be cleaned
monthly with a soft brush.
Please clean internal components once a year with a light brush and vacuum cleaner.
Keep connections clean. Disconnect electric power, and then wipe the DMX and audio connections with a
damp cloth. Make sure connections are thoroughly dry before linking equipment or supplying electric power.
Changing the Lamp
1. Disconnect mains power supply. Loosen the 4 screws on the back of the plastic housing.
2. Gently remove the small metal housing. Loosen the 2 screws of the lamp cover.
3. Follow directions for installing a new lamp, page 8.
Replacing a Fuse
Power surges, short-circuit or inappropriate electrical power supply may cause a fuse to burn out. If the fuse
burns out, the product will not function whatsoever. If this happens, follow the directions below to do so.
1. Unplug the unit from electric power source.
2. Insert a flat-head screwdriver into a slot in the fuse cover. Gently pry up the fuse cover. The fuse will
come out.
3. Remove the used fuse. If brown or unclear, it is burned out.
4. Insert the replacement fuse into the holder where the old fuse was. Reinsert the fuse cover. Be sure to
use a fuse of the same type and specification. See the product specification label for details.
17
Replacing a Gobo
Gobo-wheel with rotating gobo’s
1. Disconnect mains power supply and set the switch to OFF.
2. Make sure that the gobo you want to insert has the same size.
3. Remove the maintenance caps.
4. Turn the gobo wheel, with the gobo you want to remove, to the upside.
5. Very carefully take the pinchcock (fig 11 and 12) out of the gobo wheel, but pay attention that the
pinchcock does not fall in the device. Then push the gobo out.
6. Place the new gobo in the gobo wheel. Carefully put the pinchcock back, gently press the pinchcock
a little bit together. Possibly use a pair of pliers to press the pinchcock a little bit together.
7. Replace the maintenance cap and fasten all screws.
pinchcock
gobo
Gobo Pan
Fig. 11
Fig. 12
Troubleshooting
No Light, No Movement - All Products
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
If the light effect does not operate properly, refer servicing to a technician.
Response: Suspect three potential problem areas: the power supply, the lamp, the fuse.
1. Power supply. Check that the unit is plugged into an appropriate power supply.
2. The lamp. Replace the old lamp with a new one with the same specifications. See page 6 for replacing
lamps.
3. The fuse. Replace the fuse. See page 16 for replacing the fuse.
No Response to DMX
Response: Suspect the DMX cable or connectors, a controller malfunction, a light effect DMX card
malfunction.
1. Check the DMX cable: Unplug the unit; change the DMX cable; then reconnect to electrical power. Try
your DMX control again.
2. Determine whether the controller or light effect is at fault. Does the controller operate properly with other
DMX products ? If not, take the controller in for repair. If so, take the DMX cable and the light effect to a
qualified technician.
See next page for more problem solving.
18
Problem
One or more
fixtures are
completely dead.
Fixtures reset
correctly, but all
respond
erratically or not
at all to the
controller.
Probable cause(s)
No power to the fixture
Remedy
·Check that power is switched on and
cables are plugged in.
Primary fuse blown.
·Replace fuse.
The controller is not connected.
3-pin XLR Out of the controller
does not match XLR Out of the
first fixture on the link (i.e. signal is
reversed).
·Connect controller.
·Install a phase reversing cable
between the controller and the first
fixture on the link.
Poor data quality
Bad data link connection
Fixtures reset
correctly, but
some respond
erratically or not
at all to the
controller.
Data link not terminated with 120
Ohm termination plug.
Incorrect addressing of the
fixtures.
One of the fixtures is defective
and disturbs data transmission on
the link.
3-pin XLR Out on the fixtures does
not match (pins 2 and 3 reversed).
Shutter closes
suddenly
No light
Lamp cuts out
intermittently.
The color wheel, gobo wheel, or a
gobo has lost its index position
and the fixture is resetting the
effect.
The power supply settings do not
match local AC voltage and
frequency.
Lamp missing or blown
Fixture is too hot.
The power supply settings do not
match local AC voltage and
frequency.
·Check data quality. If much lower
than 100 percent, the problem may
be a bad data link connection, poor
quality or broken cables, missing
termination plug, or a defective fixture
disturbing the link.
·Inspect connections and cables.
Correct poor connections. Repair or
replace damaged cables.
·Insert termination plug in output jack
of the last fixture on the link.
·Check address setting.
·Bypass one fixture at a time until
normal operation is regained: unplug
both connectors and connect them
directly together.
·Have the defective fixture serviced by
a qualified technician.
·Install a phase-reversing cable
between the fixtures or swap pin 2
and 3 in the fixture, that behaves
erratically.
·Contact a technician for servicing if
the problem persists.
·Disconnect fixture. Check settings
(page 8) and correct if necessary.
·Disconnect fixture and replace lamp.
·Allow fixture to cool.
·Clean fan.
·Make sure air vents at control panel
and front lens are not blocked.
·Turn up the air conditioning.
·Disconnect fixture. Check settings
(page 8) and correct if necessary.
19
Product Specification
Model: Showtec Club Spot 575
Voltage: 240V-50Hz (CE)
Power: 800W
Fuse: 10A / 250V
Dimensions: 360x325x530mm (LxWxH)
Weight: 25 kg
Operation and Programming
Signal pin OUT: pin 1 earth, pin 2 (-), pin 3 (+)
Set Up and Addressing: LED control panel
DMX Channels: 12
Signal input 3-pin XLR male
Signal output 3-pin XLR female
Lamp
Allowed lamp models*:
Osram HMI 575 (1000 hr) ordercode 80901O
Control: Automatic and DMX remote ON / OFF
Electro-mechanical effects
Colors: 7 colors plus white
Gobos rotating: 5 rotating metal gobos, 2 rotating glass gobos and open
Static Gobos: 7 metal gobos and open
Colour-wheel with variable rotation speed
Gobo rotation: adjustable speed, position direction
Prism: 3-facer prism rotating in both directions at different speeds
All lenses are anti-reflection coated
High luminous-efficiency parabolic system
Strobe-effect with variable speed (1 flash -- 10 flashes/sec.)
DMX-control via standard DMX-controller
Sound-controlled via built-in microphone
Pan 0º -- 360º
Tilt 0º -- 270º
Gobos
Glass gobo: heat-resistant and intensify glass; dichroic glas coating
Max. ambient temperature ta: 40°C; Max. housing temperature tB: 80°C
Minimum distance:
Minimum distance from flammable surfaces: 0.5m
Minimum distance to lighted object: 1.3m
*: Versions for other lamps may be produced. Please check the specification label on your product.
Design and product specifications are subject to change without prior notice.
20
2005 Showtec.