Samsung DVD-C505 Specifications

C505/XSA-Cover(Au)00856J
5/21/03 9:41 AM
Page 2
DVD-C505
US
Downloaded From Disc-Player.com Samsung Manuals
AH68-00856J
C505/XSA-00856J(Au)
5/21/03 9:41 AM
Page 2
Precautions
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Precautions
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE
COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
This symbol indicates important
instructions accompanying the
product.
CAUTION: DVD PLAYERS USE AN INVISIBLE LASER BEAM WHICH CAN
CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE PLAYER CORRECTLY AS INSTRUCTED.
CAUTIONS
Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Attention: Pour éviter les chocs électriques, introduíre la lame la plus large de la fiche dans la borne correspondante
de la prise et pousser jusqu au fond.
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to
other equipment. To prevent electromagnetic interference with electric appliances, such as radios and televisions,
use shielded cables and connectors for connections.
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This class B digital apparatus meets all requirements of the Canadian Interference -Causing Equipment Regulations.
CLASS 1
LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1
LASER APPARAT
2
Downloaded From Disc-Player.com Samsung Manuals
WARNING
CAUTION
To reduce the risk of fire
or shock hazard, do not
expose this DVD player
to rain or moisture.
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT
OPEN COVER AND DO NOT REPAIR YOURSELF. REFER SERVICING TO
QUALIFIED PERSONNEL.
Note:
• This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere.
• This DVD player is designed and manufactured to respond to the Region Management Information. If
the Region number of a DVD disc does not correspond to the Region number of this DVD player, the
DVD player cannot play the disc.
• This device is protected by U.S. patent numbers 4,631,603, 4,577,216 and 4,819,098 and other
intellectual property rights. The use of Macrovision’s copy protection technology in the device must be
authorized by Macrovision and is intended for home and other limited pay-per-view uses only, unless
otherwise authorized in writing by Macrovision. Reverse engineering or disassembly is
prohibited.
Handling Cautions
• Before connecting other components to this player, be sure to turn them all off.
• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the player’s
internal parts may be damaged.
• Do not put a flower vase filled with water or any small metal objects on the player.
• Be careful not to put your hand into the disc tray.
• Do not place anything other than the disc in the disc tray.
• Exterior interference such as lightning and static electricity can affect normal operation of this player. If this
occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the
AC power cord to the AC power outlet. The player will operate normally.
• Be sure to remove the disc and turn off the player after use.
• Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long
periods of time.
• Clean the disc by wiping in a straight line from the inside to the outside of the disc.
Disc Storage
Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.
• Do not keep under direct sunlight.
• Keep in a cool ventilated area.
• Store vertically.
• Keep in a clean protection jacket.
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
3
C505/XSA-00856J(Au)
5/21/03 9:41 AM
Page 4
TABLE OF CONTENTS
Before You Start
Accessories
Choosing a Connection ..................................................................................12
2
Insert two AA batteries. Make
sure that the polarities (+ and -)
are aligned correctly.
3
Replace the battery cover.
• Check the polarity + - of the batteries
(Dry-Cell)
• Check if remote sensor is blocked by
obstacles.
Using the Setup Menu ....................................................................................30
Setting Up the Language Features ..................................................................31
Setting Up the Parental Control ......................................................................33
Setting Up the Audio Options ........................................................................34
Setting Up the Display Options ......................................................................35
• Check if there is any fluorescent lighting nearby.
Troubleshooting..............................................................................................36
Specifications ................................................................................................37
• Check if the batteries are drained.
4
Downloaded From Disc-Player.com Samsung Manuals
REFERENCE
Open the battery cover on the
back of the remote.
CHANGING
SETUP MENU
1
If remote doesn’t operate
properly:
S.FIT Play ......................................................................................................21
Digest Play ....................................................................................................22
Slow Repeat play ..........................................................................................23
Using the Disc View Function ..........................................................................24
Selecting the Audio Language ........................................................................25
Selecting the Subtitle Language ......................................................................26
Changing the Camera Angle ..........................................................................27
Using the Bookmark Function ..........................................................................28
Using the Zoom and 3D Sound Functions........................................................................29
ADVANCED
FUNCTIONS
Install Batteries in the
Remote
Video/Audio Cable
BASIC
FUNCTIONS
Playing a Disc................................................................................................14
Operating the Disc Changer ....................................................................16
Using the Search & Skip Functions ............................................................17
Using the Display Function..............................................................................18
Repeat Play ..................................................................................................19
Program Play & Random Play ........................................................................20
User’s Manual
CONNECTIONS
Batteries for
Remote Control (AA Size)
Remote Control
SETUP
General Features ..............................................................................................6
Disc Type and Characteristics .......................................................................... 7
Description-Front Panel ....................................................................................8
Description-Rear Panel......................................................................................9
Tour of the Remote Control..............................................................................10
5
C505/XSA-00856J(Au)
5/21/03 9:41 AM
Page 6
General Features
Excellent Sound
Dolby Digital, a technology
developed by Dolby Laboratories provides
crystal clear sound reproduction.
Screen
Both regular(4:3) and widescreen(16:9)
pictures can be viewed.
Slow Motion
An important scene can be viewed in slow
motion.
Programmed Play
You can program tracks to play in desired
order.
Parental Control
The parental control allows users to set the
level necessary to prohibit children from
viewing harmful movies such as those with
violence, adult subject matter, etc.
Various On-Screen Menu Functions
You can select various
languages(Audio/Subtitle) and screen
angles while enjoying movies.
This DVD player is capable of playing the following types of discs with the
corresponding logos:
Disc Types
(Logos)
Recording
Types
DVD
Max.
Playing Time
5"
Single-sided
240 min.
Double-sided
480 min.
31/2"
Single-sided
80 min.
Double-sided
160 min.
5"
74 min.
Audio
+
Video
Repeat
You can repeat a song or movie simply by
pressing the REPEAT button.
VIDEO-CD
NOTE
* To ensure proper playback of discs burned from MP3
files, make sure the files have been recorded at a bit
rate of at least 128kbps.
* If there are any gaps (blank data) on multi-session
discs, you may experience playback problems.
* On discs that are recorded with a Variable Bit
Rate(VBR), e.g. from 32 to 320 kbps, the sound may
cut in and out.
Disc Size
Audio
+
Video
AUDIO-CD
SETUP
DVD Changer
The DVD Changer holds 5 discs and provides
full random play with fast disc changes.
Disc Type and Characteristics
Characteristics
• DVD contains excellent sound
and video due to Dolby Digital
and MPEG-2 system.
• Various screen and audio
functions can be easily selected through the on-screen
menu.
• Video with CD sound, VHS
quality & MPEG-1 compression technology.
31/2"
20 min.
5"
74 min.
31/2"
20 min.
Audio
• CD is recorded as a
Digital Signal with better
audio quality, less distortion and less deterioration
of audio quality over time.
DISC
1
DISC SKIP
2
3
EXCHANGE
4
STANDBY ON
5
* CD-ROM, CD-I and DVD-ROM discs cannat be played in this unit!
(CDGs play audio only, not graphics.)
Disc Markings
COPY PROTECTION
• Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD player
directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD
discs.
• This product incorporates copyright protection technology that is protected by methods claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering
or disassembly is prohibited.
6
Downloaded From Disc-Player.com Samsung Manuals
~
• Play
Region
Number
PAL
• PAL broadcast
system in U.K,
France,
Germany, etc.
• Dolby
Digital disc
STEREO
DIGITAL
SOUND
• Stereo disc
• Digital
Audio disc
• DTS disc
Play Region Number
Both the DVD player and the discs are coded by region. These regional codes must match in order for the disc
to play. If the codes do not match, the disc will not play.
The Region Number for this player is described on the rear panel of the player.
7
C505/XSA-00856J(Au)
5/21/03 9:41 AM
Page 8
Description-Front Panel
Description-Rear Panel
DISC
SETUP
1
2
DISC SKIP
3
EXCHANGE
4
S-VIDEO
5
STANDBY ON
VIDEO OUT
SELECT
Y,Pb,Pr
Front Panel Controls
1 STANDBY / ON
6
• Use to turn your player on and off (standby).
2 STANDBY LAMP
7
• When the unit is first plugged in, the indicator lights.
When power is pressed on, the lamp goes out.
3 EXCHANGE
• Press this button when you want to change a disc
without stopping playback of the current disc.
4 DISC SKIP
9
10
• Use to skip a disc in order.
5 DVD CHANGER(TRAY)
• Press OPEN/CLOSE to open and close the disc
changer.
20
8
11
19 18
FRONT DISPLAY
• Operation indicators are displayed here.
PLAY/PAUSE
• Begin or pause disc play.
SKIP/SEARCH
• Use to skip or search a scene or music.
STOP
• Stops disc play.
OPEN/CLOSE
• Press to open and close the disc tray.
DISC SELECT
• Use to select the desired disc loaded in the DVD
CHANGER.
2
3
4
5
6
7
DISC TYPE INDICATOR
DVD CHANGER INDICATOR
DISC INDICATOR
TITLE INDICATOR
A-B REPEAT INDICATOR
REPEAT INDICATOR
ALL REPEAT INDICATOR
1
2
ANALOG AUDIO OUT JACKS
• Connect to the Audio input jacks of your television, audio/video receiver, or VCR.
3
VIDEO OUT JACKS
• Use a video cable to connect to the Video input jack on your television.
4
COMPONENT VIDEO OUT JACKS
• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y
video. Along with S-Video, Component Video provides the best picture quality. The Y, Pb, Pr must be
selected in the VIDEO OUT SELECT.
5
S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality
picture. The S-Video must be selected in the VIDEO OUT SELECT.
6
VIDEO OUT SELECT SWITCH
• Use the switch to set video out.
• If Y, Pb or Pr is selected, S-Video will not work.
• If S-Video is selected, Y, Pb or Pr will not work.
17
Front Panel Display
1
Rear Panel
DIGITAL AUDIO OUT JACKS
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains a Dolby Digital or DTS decoder.
8
9
10
11
12
13
14
DISC INDICATOR
DOLBY DIGITAL INDICATOR
MPEG-2 Audio output INDICATOR
3D SOUND INDICATOR
DTS INDICATOR
PARENTAL LEVEL INDICATOR
PAL INDICATOR
8
Downloaded From Disc-Player.com Samsung Manuals
15
16
17
18
19
20
PROGRAM PLAY INDICATOR
RANDOM INDICATOR
LINEAR PCM INDICATOR
TRACK INDICATOR
CHAPTER INDICATOR
OPERATION INDICATOR
9
C505/XSA-00856J(Au)
5/21/03 9:41 AM
Page 10
Tour of the Remote Control
Tour of the Remote Control
DVD Function Buttons
13
1
DVD POWER Button
2
NUMBER Buttons
3
STEP Button
16
2
ZOOM Button
5
S.FIT Button
6
3
4
5
6
7
8
9
15
STOP Button
8
MENU Button
11
21
22
23
24
12
25
10
TOP MENU Button
SKIP Buttons
• Use to skip the title, chapter, or track.
18
RETURN Button
• Returns to a previous menu.
19
DISPLAY Button
• Displays the current disc mode.
20
ENTER/DIRECTION Button
(UP/DOWN or LEFT/RIGHT buttons)
21
ANGLE Button
• Use to access various camera angles on a DVD.
• Brings up the Disc menu.
9
20
10
7
16
17
18
19
SEARCH Buttons
• Allows you to search forward/backward
through a disc.
14
PLAY/PAUSE Button
• Begin/Pause disc play.
17
• Advances play one frame at a time.
4
22
MODE Button
• Allows you to program a specific order.
• Accesses a music or video menu display
directly.
23
SUBTITLE Button
CLEAR Button
24
AUDIO Button
• Use this button to access various audio
functions on a disc.
• Use to remove menus or status displays
from the screen.
11
BOOKMARK Button
12
SETUP Button
• Brings up the DVD player’s Setup menu.
13
OPEN/CLOSE Button
14
3D SOUND Button
15
DIGEST Button
SETUP
1
25
DISC SKIP
• Use to skip a disc in order.
26
REPEAT Button
• Allows you to repeat play a title,
chapter, track, or disc.
27
A-B REPEAT Button
• Use to mark a segment to repeat between
A and B.
26
27
10
Downloaded From Disc-Player.com Samsung Manuals
11
C505/XSA-00856J(Au)
5/21/03 9:41 AM
Page 12
Choosing a Connection
Choosing a Connection
The following show examples of connections commonly used to connect the DVD player with a
TV and other components.
Connection to a TV (For Video)
TV (Normal, Widescreen, Projection, etc..)
Before Connecting the DVD Player
Basic Audio
Method 1
Method 2
Method 3
Good picture
Better picture
Best picture
CONNECTIONS
• Always turn off the DVD player, TV, and other components before you
connect or disconnect any cables.
• Refer to the owner’s manual of the additional components you are connecting for more information
on those particular components.
TV
Connection to an Audio System
AV Cable
Method 1
S-Video
Cable
Video Cables
Method 2
OR
OR
AUDIO
2ch Amplifier
Audio Input Jacks
Dolby Digital Decoder
Digital Audio Input Jack
DVD
Audio Output Jacks
Video Output
Jack
S-Video Jack
Component Video
Jacks
OR
• Method 1
• Method 2
DVD
Analog Audio Out
Digital Audio Out
• Method 3
DVD Player + TV with Video Input Jack
DVD Player + TV with S-Video Input Jack
(If S-Video is selected in the VIDEO OUT SELECT.)
DVD Player + TV with Component Video Jacks
(If Y, Pb or Pr is selected in the VIDEO OUT SELECT.)
NOTE
• If Y, Pb, Pr is selected, S-Video will not work.
• If S-Video is selected, Y, Pb, Pr will not work.
12
Downloaded From Disc-Player.com Samsung Manuals
13
C505/XSA-00856J(Au)
5/21/03 9:41 AM
Page 14
Playing a Disc
Playing a Disc
7 Step Motion Play (Except CD).
Before Play
• Turn on your TV and press the TV/VIDEO button to select the video mode.
• Turn on your Audio System and select AUX, CD or DVD.
After plugging in the player, the first time you
press the DVD POWER button, this screen comes
up :
If you want to select the language, press a NUMBER button. (This screen will
only appear the very first time you plug in the player.)
Play
Press
Touche
Drücken
Pulsar
Premere
Toets
1
2
3
4
5
6
for English
pour Français
für Deutsch
para Español
per ltaliano
voor Nederlands
Press the STEP button on the remote during play.
- Each time the button is pressed, a new frame will appear.
- No sound is heard during STEP mode.
- Press PLAY/PAUSE to resume normal play.
(You can only perform step motion play in the forward direction.)
8 Slow Motion Play (Except CD).
Press the FWD SEARCH(❿❿) or REV SEARCH(➛➛) button on the remote during
PAUSE or STEP mode.
- By pressing the FWD or REV SEARCH button, you can select slow motion play for
1/8, 1/4 or 1/2 of normal speed.
- No sound is heard during slow mode.
- Press PLAY/PAUSE to resume normal play.
- When playing a VCD, the reverse slow motion play will not work.
BASIC
FUNCTIONS
1 Press the OPEN/CLOSE button.
a disc gently into the tray with the disc’s label
facing up.
2 Place
the PLAY/PAUSE button or OPEN/CLOSE button
to close the disc tray.
3 Press
4 Stopping Play.
5 Removing Disc.
SELECT MENU LANGUAGE
The STANDBY indicator light goes out and the tray opens.
Press the STOP button during play.
Press the OPEN/CLOSE button.
6
Pausing Play.
Press the PLAY/PAUSE or STEP button on the remote during play.
- Screen stops, no sound.
- To resume again, press PLAY/PAUSE button once again.
RESUME function
When you stop disc play, the player remembers where you stopped, so when you press PLAY again, it will pick up
where you left off (unless the disc is removed, the STOP button is pressed twice or the player is unplugged.).
NOTE
• If the player is left for 5 minutes in pause mode, it will stop.
• If the player is left in the stop mode for more than one minute without any user interaction, a screen
saver will be activated, and the TV screen will fade in and out repeatedly. Press the PLAY button to
resume normal play.
• This
icon indicates an invalid button press.
14
Downloaded From Disc-Player.com Samsung Manuals
15
C505/XSA-00856J(Au)
5/21/03 9:41 AM
Page 16
Operating the Disc Changer
Using the Search & Skip Functions
The DVD Changer holds 5 discs and provides full random play with fast disc changes.
During play, you can search quickly through a chapter or track or use the skip
function to jump to the next selection.
Exchanging Discs
Exchange allows you to change up to 4 discs except the
disc currently playing.
the EXCHANGE button on the front of the
1 Press
player when in the play mode. The tray opens
with two slots available for you to load or
change discs.
the DISC SKIP button on the remote or on
2 Press
the front of the player to turn the platter to the
other two slots. Load or change the third and
Searching through a Chapter or Track
DISC EXCHANGE
play, press the FWD
or REV
1 During
SEARCH
button on the remote.
(➛➛)
(❿❿)
• Press the REVERSE or FORWARD SEARCH button on the
remote and press again to search at a faster speed on the
DVD, VCD and CD.
• To return to normal speed play, press the PLAY/ PAUSE
button.
• To change all the discs, first press the STOP button, then
the OPEN/CLOSE and DISC SKIP buttons.
the EXCHANGE, OPEN/CLOSE or the
3 Press
desired number's DISC SELECT button on the
front of the player to close the disc tray.
Using the DISC SKIP function
Use the Disc Skip function to change to another of the
discs currently in the disc platter.
in play or stop mode, press the DISC
SKIP button. The platter turns clockwise to the
1 While
next available disc.
directly select a disc, press the desired numof the DISC SELECT buttons on the front of
2 Tober
the unit to play back the disc in the desired
number's slot.
• Empty disc slots are automatically skipped during disc
skip.
16
Downloaded From Disc-Player.com Samsung Manuals
DVD 2X, 4X, 8X, 16X, 32X, 128X
VCD 4X, 8X
CD
2X, 4X, 8X
BASIC
FUNCTIONS
fourth discs.
NOTE
Skipping Tracks
play, press the NEXT SKIP
SKIP
button.
2 During
(I➛➛)
(❿❿I) or BACK
• When playing a DVD, if you press the NEXT SKIP button,
it moves to next chapter. If you press the BACK SKIP button, it
moves to the beginning of the chapter. One more press
makes it move to the beginning of the previous chapter.
• When playing a VCD 2.0 in MENU OFF mode, a VCD 1.1
or a CD, if you press the NEXT SKIP button, it moves to next
track. If you press the BACK SKIP button, it moves to the
beginning of the track. One more press makes it move to the
beginning of the previous track.
• If a track exceeds 15 minutes when playing a VCD and you
press the NEXT SKIP button, it moves forward 5 minutes. If you
press the BACK SKIP button, it moves backward 5 minutes.
• When playing a VCD 2.0 in the MENU MODE or Track View
function, if you press the NEXT SKIP button, it moves to the
next MENU or the next Track View display.
If you press the BACK SKIP button, it moves to the previous
MENU or the previous Track View display. (See page 24.)
17
C505/XSA-00856J(Au)
5/21/03 9:41 AM
Page 18
Using the Display Function
Repeat Play
Repeat the current track, chapter, title, a chosen section (A-B), or all of the disc.
When Playing a DVD
play, press the DISPLAY button
on the remote.
1 During
- Current title, chapter number and elapsed time
will be displayed.
• Use the LEFT/RIGHT buttons to select a title or
a chapter number.
Use the UP/DOWN button or Number buttons
to enter a different title or chapter number,
then press the ENTER button.
• To enter the time from which you want to start,
use the LEFT/RIGHT buttons to select, then use
the Number buttons to enter the time. Then
press the ENTER button.
1-DVD
T:01
C:02
0:01:09
When playing a DVD
DVD
ENG 5.1CH
ENG
64
Off
- Current audio, subtitle and volume control will
appear.
- To make the screen disappear, press the
DISPLAY button again.
When Playing a CD/VCD
play, press the DISPLAY button
1 During
on the remote.
- Current track number, elapsed time and volume
control will be displayed.
• Use the LEFT/RIGHT buttons to select a track.
Use the UP/DOWN button or Number buttons
to enter a different track number, then press the
ENTER button.
• To enter the time from which you want to start,
use the LEFT/RIGHT buttons to select, then use
the Number buttons to enter the time. Press the
ENTER button.
- To make the screen disappear, press the DISPLAY
button again.
18
VCD
(Menu off)
3-VCD
VCD
T:01
0:06:54
64
T:01
0:06:54
64
64
4
Off
Chapter
Title
All
A-B
Select Chapter, Title or A-B using the
LEFT/RIGHT buttons.
Press ENTER.
- For A-B Repeat
• Press the REPEAT button. Select A-B on screen with the
LEFT/RIGHT buttons or press the A-B button on the
remote.
• Press ENTER at the point where you want the repeat
play to start (A). The B is automatically highlighted.
• Press ENTER at the point where you want the repeat
play to stop (B).
• You can also set REPEAT A-B by pressing the REPEAT
A-B button at the start point(A), and pressing again at
the end point(B).
VCD/CD
Off
Tiack
Disc
All
A-B
BASIC
FUNCTIONS
the DISPLAY button on the remote
twice.
2 Press
1
2
3
Press the REPEAT button on the remote.
Repeat screen appears.
To return to normal play, press REPEAT
again, then press the LEFT/RIGHT buttons to
select Off and press ENTER.
(Menu on)
CD
4-CD
NOTE
NOTE
• What is a Chapter?
Each Title on a DVD is usually divided into
chapters (similar to tracks on an audio CD).
• What is a Title?
A DVD may contain several different titles.
For example, if a disc contains four different
movies, each might be considered a title.
Downloaded From Disc-Player.com Samsung Manuals
• DVD repeats play by chapter or title, CD and VCD repeat play by disc or track.
• Depending on the disc, the Repeat function may not work.
• If the title or track is completed before marking the end (B), the end of title or track becomes B automatically.
• When in VCD 2.0 mode (MENU ON mode), this function does not work.
• When setting A-B repeat, you must wait a few seconds after setting A to set B.
19
C505/XSA-00856J(Au)
5/21/03 9:41 AM
Page 20
Program Play & Random Play
S.FIT Play
Program Play (DVD/VCD/CD)
1
2
Press the MODE button.
3
Use the LEFT/RIGHT buttons to select the first
chapter (or track) to add to the program. Press
the ENTER button. The selection numbers appear
in the Program Order box.
Screen Fit Play
PROGRAM 01
DISC
1.DVD
2. ---
3.CD
Chap. (T:01)
4. ---
5.VCD
Program order
(ALL)
Use the LEFT/RIGHT buttons to select
PROGRAM. Press the ENTER button.
All discs in the unit will be read first.
Press the PLAY/PAUSE button. The disc will be
played in programmed order.
RETURN
CLEAR
ENTER
PLAY
Press Screen FIT button on remote control.
- Allows you to eliminate the black bars on the top and bottom
of the screen when a movie is playing in the Widescreen
format(16:9).
- Screen Fit will not work when the Zoom mode is active.
(you can not remove the black bars on the screen)
However, Zoom mode will work when Screen Fit is active.
PROGRAM 02
DISC
1.DVD
2. ---
3.CD
Chap. (T:01)
(ALL)
4. ---
5.VCD
Program order
5.02
01 02 03 04
05 06 07 08
RETURN
CLEAR
ENTER
BASIC
FUNCTIONS
4
01 02 03 04
05 06 07 08
1
PLAY
• Use the DISC SKIP key to program another disc.
Random Play (DVD/VCD/CD)
1
2
3
Press the MODE button.
PROGRAM
RANDOM
Use the LEFT/RIGHT buttons to select RANDOM.
Press the ENTER button.
Press Left/Right buttons to select All discs or Disc.
The disc(s) will be played in random order.
NOTE
• Depending on the disc, the Program and Random Play function may not work.
• When in VCD 2.0 mode (MENU ON mode), these functions do not work.
• To resume normal play, press the CLEAR button.
• Random Play can be operated only in the same disc format (only in CDs or in DVDs)
20
Downloaded From Disc-Player.com Samsung Manuals
NOTE
• Various aspect ratios are available only in multiple screen format discs.
• This function does not work when a DVD has been recorded in a multi-camera angle format.
• On some DVDs, the black bars cannot be eliminated due to their aspect ratio.
21
C505/XSA-00856J(Au)
5/21/03 9:41 AM
Page 22
Digest Play
Slow Repeat play
This feature allows you slowly repeat scenes containing sports, dancing, musical
instruments being played etc. so you can study them more closely.
Digest Play
1 During play, Press the DIGEST button.
- You'll see the 9 individual windows representing each of the
chapters on the TV screen.
- When each window is displayed, the first 3 seconds of the
chapter will be played.
Up/Down/LEFT/RIGHT buttons to select the
window you'd like to see, and press the ENTER
2 Press
button.
• Up to 9 windows(chapters) can be displayed on the screen
at a time.
Press the 'Skip' button for the next 9 chapters if the movie
has more than 9.
DIGEST
01
02
03
04
05
06
07
08
09
skip button
DIGEST
10
11
13
14
12
• You can play the DVD player starting with the desired chapter after directly moving to the scene you want.
• 'DIGEST' may not operate depending on the disc in use.
22
Downloaded From Disc-Player.com Samsung Manuals
1
2
Press the PLAY/PAUSE button.
3
4
Press the REPEAT (A-B) button to select the point where you want slow
Repeat to start (A).
Press the F/SEARCH button to choose the play speed between 1/8X, 1/4X, and
1/2X of normal.
Press the REPEAT (A-B) button to select the point where you want slow Repeat to
start (B).
ADVANCED
FUNCTIONS
NOTE
When playing a DVD
NOTE
• The disc will play only from A to B repeatedly at the speed you chose.
• To terminate the function, press the 'CLEAR' button or the 'REPEAT (A-B)' button again.
• You must wait a few seconds after setting A to set B.
23
C505/XSA-00856J(Au)
5/21/03 9:41 AM
Page 24
Using the Disc View Function
Selecting the Audio Language
You can select a desired language quickly and easily with the AUDIO button.
Track View (VCD)
Displays the beginning view of each track and the
track number.
1 During play, press the TOP MENU button.
the UP/DOWN buttons to select TRACK
2 Press
VIEW. Press the ENTER button.
the desired view by pressing the
3 Select
UP/DOWN or LEFT/RIGHT buttons.
4
Press the ENTER button.
- Press the 'Skip' button for the next 9 chapters if the movie
has more than 9.
- This function is available with the VCD Menu mode off.
Disc
View
ENTER
Using the AUDIO button
1 Track View
2 Index View
1 Press the AUDIO button.
the UP/DOWN buttons to select the
2 Use
desired language on a DVD.
TRACK VIEW
01
02
03
04
05
06
07
08
09
01
02
03
04
05
06
07
08
09
- The audio languages are represented by abbreviations.
DVD
ENG DOLBY DIGITAL 5.1CH
VCD
Stereo
3
Use the UP/DOWN buttons to select
Stereo, Right or Left. (On VCD/CD)
example
Index View (VCD)
1
UP/DOWN buttons to select INDEX
2 Press
VIEW. Press the ENTER button.
the desired view by pressing
3 Select
UP/DOWN or LEFT/RIGHT buttons.
4 Press the ENTER button.
During play, press the TOP MENU button.
ADVANCED
FUNCTIONS
Displays the equally divided 9 views of the current
playing track.
INDEX VIEW
example
NOTE
NOTE
• This function depends on what languages are encoded on the disc and may not work with all DVDs.
• A DVD disc can contain up to 8 audio languages.
• How to have the same audio language come up whenever you play a DVD;
Refer to “Setting Up the Language Features” on page 32.
• In stop mode on VCD, press the TOP MENU button and the TRACK VIEW will be displayed.
• When pressing the TOP MENU button with a DVD; the disc’s TITLE MENU function comes up. A disc must
have at least two titles for the TITLE MENU function to work.
• When pressing the TOP MENU button with a CD; the unit enters the INTRO mode. INTRO lets you listen
to the beginning of each track for about 10 seconds.
24
Downloaded From Disc-Player.com Samsung Manuals
25
C505/XSA-00856J(Au)
5/21/03 9:41 AM
Page 26
Selecting the Subtitle Language
Changing the Camera Angle
You can select a desired subtitle quickly and easily with the SUBTITLE button.
Using the SUBTITLE button
1
2
3
Press the SUBTITLE button.
Use the UP/DOWN buttons to select the
desired subtitle language.
When a DVD contains multiple angles of a particular scene, you can select the Angle function.
Using the ANGLE button
ENG
Off
ENG
On
Use the LEFT/RIGHT button to determine
whether or not the subtitle will be displayed.
- Initially, the subtitling will not appear on screen.
- The subtitle languages are represented by abbreviations.
Press the ANGLE button to see if an ANGLE (
)
mark is present at the upper right hand corner of
the screen.
1
2
3
When an ANGLE mark is shown, press the
ANGLE button, then an ANGLE select icon
will appear at the upper left hand corner
of the screen.
4/6
example
Use the UP/DOWN buttons to select the
desired screen angle.
To turn off the display, press the ANGLE
button again.
the Display button twice while in play
1 Press
mode.
Press the Left/Right buttons to choose Master
volume(
).
Press UP/DOWN to lower/raise the Master
volume.
ADVANCED
FUNCTIONS
Master Volume Control Function
ENG 5.1CH
ENG
Off
64
64
NOTE
• This function depends on what languages are encoded on the disc and may not work with all DVDs.
• A DVD disc can contain up to 32 subtitle languages.
• How to have the same subtitle language come up whenever you play a DVD;
Refer to “Setting Up the Language Features” on page 32.
- Master Volume Control function lets you adjust the volume of the player’s output. This is useful for matching the
player’s output level to other equipment in your system.
- Volume control is only operative when using the
Analog Audio outputs.
- There are up to 64 levels. Lowering each level
reduces the audio level by 0.5dB.
NOTE
26
Downloaded From Disc-Player.com Samsung Manuals
• Default Volume (64) may be reset anytime, but it will be effective only in the same disc
format after reset. (only in CDs or DVDs)
27
C505/XSA-00856J(Au)
5/21/03 9:41 AM
Page 28
Using the Bookmark Function
Using the Zoom & 3D Sound Functions
The Bookmark function lets you select parts of a DVD or VCD (MENU OFF mode) so that you
can quickly find the section at a later time.
play or pause mode, press the
1 During
ZOOM button on the remote. A square will
be displayed on screen.
Using the Bookmark Function (DVD/VCD)
1
During play, press the BOOKMARK button on
the remote. The Bookmark icons will be displayed.
the UP/DOWN or LEFT/RIGHT
2 Use
button to select the part of the screen you
want to zoom in on.
ENTER
the LEFT/RIGHT button to move to the
desired bookmark icon.
2 Use
3
4
Using the Zoom Function (DVD/VCD)
3 Press the ENTER button.
When you reach the scene you want to mark,
press the ENTER button. The icon will change to
a number (1, 2, or 3).
- During DVD play, press ENTER to zoom in
2X/4X/2X/Normal in order.
- During VCD play, press ENTER to zoom in
2X/normal in order.
Press the BOOKMARK button to turn off the
display.
Using the 3D Sound Function
Recalling a Marked Scene
1
PLAY
CLEAR
Clearing a Bookmark
1
2
3
NOTE
During play, press the BOOKMARK button
on the remote.
Use the LEFT/RIGHT button to select the
bookmark number you want to delete.
Press the CLEAR button to delete a bookmark
number. Press the BOOKMARK button to turn
off display.
28
Downloaded From Disc-Player.com Samsung Manuals
• Up to three scenes may be
marked at a time.
• When in VCD 2.0 mode (MENU
ON mode), this function does not
work.
• Depending on the disc, the
Bookmark function may not work.
The simulated surround effect (SPATIALIZER N-2-2)
depends on the disc contents. If you connect the
unit to your stereo system, you can enhance sound
quality and produce a greater surround effect.
This feature is useful when you are using the DVD
player with a two channel stereo through the analog outputs.
(Discs which are recorded with LPCM or DTS will
not work. When the DIGITAL OUTPUT is set to BIT
STREAM in the SETUP MENU, the 3D Sound function will not work.)
1
During play, press the 3D SOUND button.
The 3D SOUND mark will be displayed on
screen. (Be sure the DIGITAL OUTPUT is set to
PCM.)
2
Press the UP/DOWN buttons to turn the 3D
Sound feature on or off.
Off
ADVANCED
FUNCTIONS
1
the LEFT/RIGHT button to select a marked
scene.
2 Use
the PLAY/PAUSE button to skip to the
marked scene.
3 Press
During play, press the BOOKMARK button on
the remote.
NOTE
• 3D Sound is possible only on discs
recorded using DOLBY SURROUND or
DOLBY DIGITAL.
• Depending on the disc, the Zoom and
3D Sound function may not work.
29
C505/XSA-00856J(Au)
5/21/03 9:41 AM
Page 30
Using the Setup Menu
Setting Up the Language Features
The Setup menu lets you customize your DVD player by allowing you to select various language preferences, set up a parental level, even adjust the player to the type of television
screen you have.
If you set the player menu, disc menu, audio and subtitle language in advance, they will come
up automatically every time you watch a movie.
Using the Player Menu Language
1
With the unit in Stop mode, press the SETUP button
on the remote.
Player Menu : Setup of the Display Language
Use the Player preference menu to select the
language for the player’s on-screen displays.
SETUP MENU
1
2
3
4
5
6
7
Player Menu
Disc Menu
Audio
Subtitle
Parental
Audio Options
Display Options
RETURN
English
English
English
Automatic
Unlocked
ENTER
Disc Menu : Setup of the Menu Language
Use the Menu preference menu to select the language you want a
DVD’s disc menu to be displayed in.
Audio : Setup of the Audio Language
Use the Audio preference menu to select the soundtrack language.
Subtitle : Setup of the Subtitle Language
Use the Subtitle preference menu to select the language the disc’s subtitles are to be displayed in.
- English is selected and the screen returns to SETUP
MENU.
- To make the SETUP MENU disappear, press the
RETURN button.
Parental : Setup of the Parental Level
Allows users to set the level necessary to prevent children from
viewing unsuitable movies such as those with violence, adult subject
matter, etc.
Press the ENTER button to access the sub features.
To make the setup screen disappear after setting up, press the
SETUP button again.
Player Menu
Disc Menu
Audio
Subtitle
Parental
Audio Options
Display Options
English
English
English
Automatic
Unlocked
RETURN
ENTER
PLAYER MENU LANGUAGE
1
2
3
4
5
6
English
Français
Deutsch
Español
Italiano
Nederlands
ENTER
This function changes the text language only
on the disc menu screens.
NOTE
Depending on the disc, some
Setup Menu selections may not
work.
the unit in Stop mode, press the
SETUP button.
1 With
the UP/DOWN buttons to select
DISC MENU.
2 Use
3 Press the ENTER button.
the UP/DOWN button to select
‘English’.
4 Use
e.g Setting up in English.
DISC MENU LANGUAGE
1
2
3
4
5
6
7
English
Français
Deutsch
Español
Italiano
Nederlands
Others
RETURN
ENTER
CHANGING
SETUP MENU
3
SETUP MENU
1
2
3
4
5
6
7
RETURN
Display Options : Setup of the Display Options
Use to select which type of screen you want to watch and several
display options.
Use the UP/DOWN buttons on the remote to access
the different features.
e.g Setting up in English.
Using the Disc Menu Language
Audio Options : Setup of the Audio Options
2
the unit in Stop mode, press the
1 With
SETUP button.
the UP/DOWN buttons to select the
2 Use
PLAYER MENU.
3 Press the ENTER button.
the UP/DOWN buttons to select
4 Use
‘English’.
5 Press the ENTER button.
- Select “Others” if the language you want is not
listed.
5 Press the ENTER button.
- English is selected and the screen returns to SETUP
MENU.
30
Downloaded From Disc-Player.com Samsung Manuals
31
C505/XSA-00856J(Au)
5/21/03 9:41 AM
Page 32
Setting Up the Language Features
Setting Up the Parental Control
Using the Audio Language
the unit in Stop mode, press the SETUP button.
1 With
2 Press the UP/DOWN buttons to move to AUDIO.
3 Press the ENTER button.
4 Press the UP/DOWN buttons to select ‘ENGLISH’ .
e.g Setting up in English
AUDIO LANGUAGE
1
2
3
4
5
6
7
8
English
Français
Deutsch
Español
Italiano
Nederlands
Original
Others
RETURN
ENTER
- Select “Original” if you want the default soundtrack language
to be the original language the disc is
recorded in.
- Select “Others” if the language you want is not listed.
5
Press the ENTER button.
Password is set to Yes. To unlock the player,
use LEFT/RIGHT to select No. Use UP/DOWN
to select Rating level. Press ENTER.
SUBTITLE LANGUAGE
1
2
3
4
5
6
7
8
RETURN
Automatic
English
Français
Deutsch
Español
Italiano
Nederlands
Others
- Use UP/DOWN to select the level(e.g. Level 6) and press
ENTER. Discs that contain Level 7 will now not play.
- To cancel the rating level, use LEFT/RIGHT to select No in Use
Password.
the Change Password ;
6 -About
Use UP/DOWN to select Change Password.
ENTER
The Change Password screen appears.
- Enter your new password. Re-enter the new
password again.
NOTE
• If the selected language is not
recorded on the disc, the original
pre-recorded language is selected.
• How to make the SETUP MENU disappear or return to menu screen
during set up; Press RETURN button.
1 Use Password
No
RETURN
ENTER
CREATE PASSWORD
Enter Password
RETURN
PRESS 0-9
PARENTAL CONTROL
1 Use Password
2 Rating Level
3 Change Password
RETURN
Yes
1
ENTER
e.g Setting up in LEVEL6.
RATING LEVEL
Level
Level
Level
Level
Level
Level
Level
Level
8 Adult
7
6
5
4
3
2
1 Klds Safe
RETURN
CHANGING
SETUP MENU
5
Press the ENTER button.
e.g Setting up in English
PARENTAL CONTROL
Enter your password. The Re-enter Password
screen appears to confirm the password.
Enter your password again. The Parental
Control screen appears.
the Rating Level ;
5 About
The Rating Level will work only when Use
Using the Subtitle Language
- Select “Automatic” if you want the subtitle language to be
the same as the language selected as the audio preference.
- Select “Others” if the language you want is not listed. Some
discs may not contain the language you select as
your initial language; in that case the disc will use its
original language setting.
the unit in Stop mode, press SETUP button.
The Setup Menu screen appears.
1 With
UP/DOWN to select Parental. Press ENTER.
The Parental Control screen appears.
2 Use
LEFT/RIGHT to select Yes if you want to use
a password. Press ENTER. The Enter Password
3 Use
screen appears.
4
- English is selected and the screen returns to SETUP MENU.
the unit in Stop mode, press the SETUP button.
1 With
2 Use the UP/DOWN buttons to select SUBTITLE.
3 Press the ENTER button.
4 Use the UP/DOWN buttons to select ‘ENGLISH’.
The Parental Control function works in conjunction with DVDs that have been assigned a
rating - which helps you control the types of DVDs that your family watches. There are up
to 8 rating levels on a disc.
ENTER
NOTE
• How to make the SETUP MENU disappear or return to menu screen during set up;
Press RETURN button.
• If you have forgotten your password, see Forgot Password in the Troubleshooting Guide. (P36)
- English is selected and the screen returns to SETUP MENU.
32
Downloaded From Disc-Player.com Samsung Manuals
33
C505/XSA-00856J(Au)
5/21/03 9:41 AM
Page 34
Setting Up the Audio Options
1
Setting Up the Display Options
With the unit in Stop mode, press the SETUP button.
AUDIO OPTIONS
1
2
3
4
5
2
the UP/DOWN buttons to select the desired item.
Then press the LEFT/RIGHT button.
3 Use
Use the UP/DOWN buttons to select AUDIO OPTIONS.
Then press the ENTER button.
Dolby Digital Out
1. PCM :
Converts to PCM(2CH) 48kHz/16Bit audio.
Select PCM when using the Analog
Audio Outputs.
2. Bitstream :
Converts to Dolby Digital Bitstream (5.1CH).
Select Bitstream when using the Digital
Audio Output.
NOTE
• Be sure to select the correct Digital Output or no audio
will be heard.
MPEG-2 Digital Out
PCM
PCM
Off
On
Off
RETURN
DTS
1. On : Outputs DTS Bitstream via digital
output only.
Select DTS when connecting to a
DTS Decoder.
2. Off : Doesn’t output digital signal.
Dynamic Compression
1. On : To select dynamic compression.
This keeps the volume at one consistent level.
2. Off : To select the standard range.
2X Scan Audio
1. On : Turns 2X audio on.
2. Off : Turns 2X audio off.
Though 2X Scan Audio is ON in the
SETUP MENU, no sound will be heard
on discs which are recorded with LPCM,
DTS or MPEG-2 Audio.
NOTE
• How to make the SETUP MENU disappear or return to menu screen during set up; Press RETURN button.
• Certain audio features of this product manufactured under a license from Desper Products, Inc.
Spatializer® and circle-in-square device are trademarks owned by Desper Products, Inc.
• Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
34
Downloaded From Disc-Player.com Samsung Manuals
1 With the unit in Stop mode, press the SETUP button.
the UP/DOWN buttons to select DISPLAY
OPTIONS. Then press the ENTER button.
2 Use
the UP/DOWN buttons to select the desired item.
Then press the LEFT/RIGHT buttons.
3 Use
DISPLAY OPTIONS
1
2
3
4
5
6
TV Aspect
Still Mode
Screen Massages
Front Display
Black Level
Quasi-PAL
RETURN
4 : 3 L-Box
Auto
On
Auto Dim
Off
On
ENTER
TV Aspect
Depending on the type of television you have, you may want to
adjust the screen setting (aspect ratio).
1. 4:3 Letter Box :
Select when you want to see the total 16:9 ratio screen DVD
supplies, even though you have a TV with a 4:3 ratio screen.
Black bars will appear at the top and bottom of the screen.
2. 4:3 Pan-Scan :
Select this for conventional size TVs when you want to see the
central portion of the 16:9 screen. (Extreme left and right side of
movie picture will be cut off.)
3. 16:9 Wide :
You can view the full 16:9 picture on your widescreen TV.
Still Mode
These options will help prevent picture shake in still mode and
display small text clearer.
1. Field : Select this feature when the screen shakes in the Auto mode.
2. Frame : Select this feature when you want to see small letters
more clearly in the Auto mode.
3. Auto : When selecting Auto, Field/Frame mode will be
automatically converted.
Screen Messages
Use to turn on-screen messages On or Off.
Front Display
Adjust the brightness of the unit’s front panel display.
1. Bright : Makes the Front Panel Display bright.
2. Dim : Makes the Front Panel Display dim.
3. Auto Dim : Makes the Front Panel Display dim automatically
when playing a DVD.
Black Level
Adjusts the brightness of the screen.(On/Off)
CHANGING
SETUP MENU
1. PCM :
Converts to PCM(2CH) audio.
Select PCM when using the Analog Audio
Outputs.
2. Bitstream :
Converts to MPEG-2 Digital Bitstream
(5.1CH or 7.1CH).
Select Bitstream when using the Digital
Audio Output.
Dolby Digital Out
MPEG-2 Digital Out
DTS
Dynamic Compression
2x Scan Audio
Quasi-PAL
Depending on a disc, you can play a NTSC DVD disc by Quasi-PAL mode.
NOTE
• How to make the SETUP MENU disappear or return to menu screen during set up;
Press RETURN button.
• The TV aspect ratio may be dependent on the disc.
35
C505/XSA-00856J(Au)
5/21/03 9:41 AM
Page 36
Troubleshooting
Specifications
Before requesting service (troubleshooting), please check the following.
Action
Problem
Page
General
No operations can be
performed with remote.
• Check the batteries in the remote. May need replacing.
• Operate the remote control at a distance of no more than 20 feet.
• Remove batteries and hold down one or more buttons for several minutes to drain the microprocessor inside the remote to reset it. Reinstall
batteries and try remote again.
P4
Disc does not play.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
P7
5.1 channel sound is not
being reproduced.
• 5.1 channel sound is reproduced only when the following conditions
are met. :
1) The DVD player is connected with the proper amplifier
2) The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the “Dolby 5.1 ch” mark on
the outside.
• Check if your audio system is connected and working properly.
• In a SETUP Menu, is the Audio Output set to Bitstream?
The
icon appears on
screen.
• The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is
out of range.
Disc Menu doesn’t appear.
• Check if the disc has a Menu.
Play mode differs from the
Setup Menu selection.
• Some of the functions selected in the Setup Menu may not work properly if the disc is not encoded with the corresponding function.
P12~13,
P34
AC 110V~240 V, 50/60 Hz
Power Consumption
15 W
15.4 lbs
W 16.9 in x D 15.9 in x H 3.5 in
+41°F to +95°F
10 % to 75 %
Weight
Dimensions
Operating Temperature Range
Operating Humidity Range
DVD
(DIGITAL VERSATILE DISC)
Disc
CD : 5"
(COMPACT DISC)
CD : 31/2"
(COMPACT DISC)
VCD : 5"
P15
Video
Output
Composite Video
Component Video
S-VIDEO
2 Channel
P30~35
The screen ratio cannot be
changed.
• The Screen Ratio is fixed on your DVDs.
P35
No audio.
• Make sure you have selected the correct Digital Output in the Audio
Options Menu.
P34
Forgot password
• Press power on from a cold start with no disc in the unit. Press the STOP
and PLAY buttons simultaneously on the front panel for three seconds. The
Select Menu Language display will appear. Select the desired language
button. Press the SETUP button on the remote control to select the Parental
Mode. The Parental Mode is now unlocked as indicated on the display.
Press the DOWN button to select Parental. Press ENTER and the Create
Password display will appear. You can now set your rating level and
change your password to a new number.
Audio
Output
*Frequency Response
*S/N Ratio
*Dynamic Range
*Total Harmonic Distortion
Reading Speed : 11.45 ft/sec.
Approx. Play Time
(Single Sided, Single Layer Disc) : 135 min.
Reading Speed : 3.9 to 4.6 ft/sec.
Maximum Play Time : 74 min.
Reading Speed : 3.9 to 4.6 ft/sec.
Maximum Play Time : 20 min.
Reading Speed : 3.9 to 4.6 ft/sec.
Maximum Play Time : 74 min. (Video + Audio)
1 channel : 1.0 Vp-p (75 Ω load)
Y : 1.0 Vp-p (75 Ω load)
Pr : 0.70 Vp-p (75 Ω load)
Pb : 0.70 Vp-p (75 Ω load)
Luminance Signal : 1.0 Vp-p (75 Ω load)
Chrominance Signal : 0.286 Vp-p (75 Ω load)
L(1/L), R(2/R)
48 kHz Sampling : 4 Hz to 22 kHz
96 kHz Sampling : 4 Hz to 44 kHz
110 dB
100 dB
0.003 %
*: Nominal specification
P33
• Samsung Electronics Co., Ltd. reserves the right to change the specifications without notice.
• Weight and dimensions are approximate.
• Go to the contents and find the section of the instruction book that
contains the explanations regarding the current problem, and follow
the procedure once again.
• If the problem still cannot be solved, please contact your nearest
authorized service center.
36
Downloaded From Disc-Player.com Samsung Manuals
REFERENCE
If you experience other
problems.
Power Requirements
37
C505/XSA-00856J(Au)
5/21/03 9:41 AM
Page 38
Memo
Downloaded From Disc-Player.com Samsung Manuals
Memo