mininvr uzivatelsky manual

The Intelligent Surveillance Solution

NAS NVRmini

User Manual

Table of Contents

1. Installation ................................................................................................. 3

1.1 Installation Process ......................................................................... 3

1.2 LED Status Definitions .................................................................. 12

2. Settings ................................................................................................... 13

2.1 Camera Setup ............................................................................... 13

2.1.1 Add Cameras by Camera Search ......................................... 13

2.1.2 Add Cameras Manually ........................................................ 15

2.1.3 Modify Camera Information .................................................. 17

2.1.4 Modify Camera Parameters .................................................. 17

2.1.5 Set up Lens Settings............................................................. 18

2.1.6 Set up 2nd Stream ................................................................ 19

2.1.7 View Camera Status ............................................................. 20

2.2 Recording & Event Setup .............................................................. 21

2.2.1 Recording Mode Setup ......................................................... 21

2.2.2 Recording Schedule / Event Setup ....................................... 21

2.2.3 Camera Events and Responding Actions Setup ................... 26

2.2.4 I/O Box Input and Responding Action Setup ......................... 28

2.2.5 System Events and Responding Actions Setup .................... 30

2.2.6 SMTP Server Setup .............................................................. 31

2.2.7 Add Event Contacts .............................................................. 32

2.3 RAID & File Settings ..................................................................... 33

2.3.1 View RAID Volume Status .................................................... 33

2.3.2 View Disk Drive Information .................................................. 33

2.3.3 Migrate a RAID Volume ........................................................ 34

2.3.4 Create a RAID Volume ......................................................... 35

2.3.5 Designate a Spare Drive ....................................................... 36

2.3.6 Delete a RAID Volume .......................................................... 37

2.3.7 Recover ................................................................................ 38

2.3.8 View Protocol Status ............................................................. 38

2.3.9 Modify the “My Network Places” Protocol Settings ............... 38

2.3.10 Modify the FTP Protocol Settings ..................................... 39

2.4 Auto Backup .................................................................................. 40

2.4.1 Set up Backup Schedule ...................................................... 40

2.4.2 Set up Backup Server ........................................................... 41

2.5 Network Setup .............................................................................. 42

2.5.1 View Network Status ............................................................. 42

2.5.2 Network Settings .................................................................. 43

1

2.5.3 Auto Port-Forwarding ............................................................ 45

2.5.4 Network Service Setup ......................................................... 47

2.5.5 CMS Service Setup .............................................................. 48

2.6 Management ................................................................................. 49

2.6.1 View the List of Users ........................................................... 49

2.6.2 Create New Users ................................................................ 49

2.6.3 Modify User Information ........................................................ 50

2.6.4 Change a User’s Password .................................................. 51

2.6.5 Delete Users ......................................................................... 51

2.6.6 Online License Activation ...................................................... 52

2.6.7 Offline License Activation ...................................................... 53

2.6.8 View the Event Log ............................................................... 55

2.6.9 Save Unit Configuration ........................................................ 55

2.6.10 Load Unit Configuration / Default Settings ........................ 56

2.7 System .......................................................................................... 58

2.7.1 View System Information ...................................................... 58

2.7.2 View Enclosure Information .................................................. 58

2.7.3 Upgrade the System ............................................................. 59

2.7.4 System Date and Time Setup ............................................... 60

2.7.5 Daylight Saving Time Setup .................................................. 61

2.7.6 Enable and Disable the Buzzer ............................................ 61

2.7.7 View UPS Status ................................................................... 62

2.7.8 UPS Setup ............................................................................ 63

2.7.9 Auto Power On ..................................................................... 63

2.7.10 Restart the Unit................................................................. 64

2.7.11 Shut Down the Unit .......................................................... 65

3. POS ........................................................................................................ 66

3.1 Introduction ................................................................................... 66

3.1.1 System Introduction .............................................................. 66

3.1.2 Hardware Installation – SCB-C31A ....................................... 67

3.1.3 Software Installation – SCB-C31A ........................................ 68

3.1.4 Connection via TCP Client .................................................... 70

3.2 Software Setup.............................................................................. 70

3.2.1 Activate POS License ........................................................... 70

3.2.2 NVR POS Setting ................................................................. 70

3.2.3 Insert POS Setting ................................................................ 72

3.2.4 Delete POS Device ............................................................... 74

3.2.5 Configure POS Setting ......................................................... 74

2

3.3 Tag Filter ....................................................................................... 74

3.3.1 Add New Tag Filter ............................................................... 74

3.3.2 Edit Tag Filter ........................................................................ 78

3.3.3 Delete Tag Filter .................................................................... 78

3.3.4 Import/Export Tag Filter ........................................................ 78

3.4 POS Display Font ......................................................................... 78

3.4.1 Live View .............................................................................. 78

3.4.2 Remote Live Viewer .............................................................. 79

3.4.3 Playback ............................................................................... 80

3.4.4 Playback System .................................................................. 81

3.5 POS Transaction Data Search ...................................................... 82

3.5.1 Search POS Transaction Data through Playback ................. 83

3.5.2 Search POS Transaction Data through Playback System .... 84

3.6 Playback Video with POS Data ..................................................... 84

3.6.1 Select Period by POS Search ............................................... 84

3.6.2 Select Period by Data & Time through Playback .................. 85

3.6.3 Select Period by Data & Time through Playback System ..... 85

3.7 Backup Video with POS Data ........................................................ 85

3.7.1 Backup through Internet Explorer ......................................... 86

3.7.2 Backup through Playback System ........................................ 86

3.7.3 Backup through Backup System ........................................... 87

4. I/O ........................................................................................................... 88

4.1 Introduction ................................................................................... 88

4.1.1 System Introduction .............................................................. 88

4.1.2 HW Installation...................................................................... 88

4.1.3 Software Installation – SCB-C31 .......................................... 89

4.1.4 Software Installation – SCB-C24/26/28 ................................ 90

4.2 Software Setup.............................................................................. 92

4.2.1 Add I/O Box .......................................................................... 92

4.2.2 Modify I/O Box Information ................................................... 93

4.2.3 I/O Pin Setting ...................................................................... 93

4.3 Relative Configuration and Application.......................................... 94

4.3.1 Record on Input Trigger ........................................................ 94

4.3.2 Input and Responding Actions .............................................. 94

4.3.3 I/O Control Panel in Live View .............................................. 94

5. Live view ................................................................................................. 95

5.1 Internet Explorer ........................................................................... 95

5.1.1 Live View Control Panel ........................................................ 95

3

5.1.2 Live View Setting .................................................................. 98

5.1.3 General Setting ..................................................................... 99

5.1.4 Stream Profile Setting ........................................................... 99

5.1.5 OSD (On-screen display) Setting ....................................... 100

5.1.6 Monitor Display Setting ....................................................... 101

5.1.7 Notification .......................................................................... 102

5.1.8 Set up Joystick Control ....................................................... 103

5.1.9 Set up Live View Sound on Event ....................................... 104

5.2 Remote Live Viewer Application .................................................. 105

5.2.1 Remote Live Viewer Application Control Panel ................... 105

5.2.2 Unit Connection Setting ...................................................... 108

5.2.3 General Setting ................................................................... 109

5.2.4 Camera Group Setting ........................................................ 110

5.2.5 Delete/ Rename Camera Groups ....................................... 111

5.2.6 Stream Profile Setting ......................................................... 111

5.2.7 OSD (On-screen display) Setting ....................................... 112

5.2.8 Monitor Display Setting ....................................................... 113

5.2.9 Notification .......................................................................... 114

5.2.10 Set up Joystick Control ................................................... 115

5.2.11 Set up Live View Sound on Event .................................. 116

5.2.12 Set up Remote Live Viewer ............................................ 117

6. E-Map ................................................................................................... 118

6.1 Internet Explorer ......................................................................... 118

6.1.1 E-Map Control Panel .......................................................... 118

6.1.2 Add Map ............................................................................. 119

6.1.3 Edit Map ............................................................................. 120

6.1.4 Delete Map ......................................................................... 120

6.1.5 Add/Rotate Device Indicator ............................................... 121

6.1.6 Delete Device Indicator ....................................................... 121

6.1.7 Layout Adjustment .............................................................. 121

6.1.8 Relative Configuration and Application ............................... 122

6.2 Remote Live Viewer Application .................................................. 122

6.2.1 E-Map Control Panel .......................................................... 122

7. Playback ............................................................................................... 123

7.1 Internet Explorer ......................................................................... 123

7.1.1 Playback Control Panel ...................................................... 123

7.1.2 Search the Recorded Video ................................................ 125

7.1.3 Play the Recorded Video .................................................... 127

4

7.1.4 Intelligent Search ................................................................ 127

7.1.5 Recorded Video Enhancement ........................................... 128

7.1.6 Save a Video ...................................................................... 129

7.1.7 Save an Image ................................................................... 131

7.1.8 Print an Image .................................................................... 131

7.1.9 Backup the Recorded Video ............................................... 132

7.2 Remote Playback System Application ......................................... 134

7.2.1 Playback System Application Control Panel ....................... 134

7.2.2 Set up Unit Connections ..................................................... 134

7.2.3 Search the Recorded Video ................................................ 136

7.2.4 Play the Recorded Video .................................................... 136

7.2.5 Intelligent Search ................................................................ 137

7.2.6 Recorded Video Enhancement ........................................... 138

7.2.7 Save a Video ...................................................................... 139

7.2.8 Save an Image ................................................................... 139

7.2.9 Print an Image .................................................................... 140

7.2.10 Backup the Recorded Video ........................................... 140

8. Backup and Delete Records ................................................................. 142

8.1 The Backup System Application .................................................. 142

8.2 Backup the Recorded Video through Windows Explorer ............. 145

8.3 Backup the Recorded Video through FTP ................................... 145

8.4 Playback the Backup Records .................................................... 146

8.4.1 With Playback Application ................................................... 146

8.4.2 Without Playback Application .............................................. 146

8.5 Delete the Recorded Video ......................................................... 146

8.5.1 With Backup Application ..................................................... 146

8.5.2 Without Backup Application ................................................ 149

9. Verification Tool ..................................................................................... 150

9.1 Execute Verification Tool ............................................................. 150

9.2 Verify Image / Video .................................................................... 151

10. External Storage ............................................................................ 152

10.1 Create a Volume on DAS ........................................................ 152

11.

10.2 Create an External Storage on NAS ....................................... 152

Log out........................................................................................... 154

12.

13.

Remote PC System Requirements ................................................ 155

Troubleshooting ............................................................................. 156

13.1 Check the System Status LED ................................................ 156

13.2 Check Disk Status LEDs ......................................................... 156

5

13.3 Replace a Failed Disk Drive .................................................... 156

13.4 Check RAID Volume Status .................................................... 157

13.5 Respond to a Critical RAID Volume ........................................ 157

13.6 Respond to an Invalid RAID Volume ....................................... 157

13.7 Check File System Status ....................................................... 158

13.8 Rebuild the File System .......................................................... 158

13.9 Check Enclosure Status .......................................................... 159

13.10 Restore the Default Administrator’s Password ........................ 159

13.11 Restore All Default Configuration ............................................ 160

13.12 Install ActiveX ......................................................................... 160

13.13 Upgrade Process When Using Windows Vista ....................... 161

13.14 Cannot Playback When Applying Windows 2000 ................... 163

13.15 Cannot Log in to the Unit with Internet Explorer ..................... 163

13.16 UAC on Windows Vista ........................................................... 163

13.16.1 Turn off UAC on Windows Vista ..................................... 163

13.16.2 Enable Privilege Level of Internet Explorer ..................... 166

13.17 Install Wizard Issue on Windows Vista ................................... 167

13.17.1 FW Upgrade ................................................................... 167

13.17.2 Workaround .................................................................... 167

Appendix – RAID System ............................................................................ 168

Introduction to RAID ............................................................................. 168

RAID 0 – Stripe ..................................................................................... 168

RAID 1 – Mirror ..................................................................................... 169

RAID 5 – Block Striping with Distributed Parity ..................................... 170

RAID 10 – Mirror / Stripe ....................................................................... 171

Choosing a RAID Level ........................................................................ 171

Spare Drives ......................................................................................... 173

Automatic Rebuilding ............................................................................ 173

RAID Volume Migration ........................................................................ 174

Appendix – Camera Integration ................................................................... 176

Camera Supporting List ........................................................................ 176

Camera Search Tool ............................................................................. 176

Stream Profile ....................................................................................... 176

6

GNU General Public License

This product includes copyrighted third-party software licensed under the terms of the GNU

General Public License. Please see the GNU General Public License (GPL) for the exact terms and conditions of this license at www.gnu.org. The GPL source code incorporated into the product is available for free download at our web site http://www.nuuo.com/.

Subject to GPL, you may re-use, re-distribute and modify the GPL source code.

Note that with respect solely to the GPL Software, no warranty is provided. We do not offer direct support for the distribution.

2

1. Installation

1.1 Installation Process

Step 1: Unpacking the Unit

This package contains the following items:

 The unit

 Quick Start Guide

 Screws for disk drives (1 package)

 Power cord

 Warranty card

 12V DC power transformer (2 bay unit)

 CD with Install Wizard, Backup, Live View, Playback, and Offline

Tool application, user manual, and quick start guide

Warning

The electronic components within the unit are sensitive to damage from Electro-Static Discharge (ESD). Please take precautions at all times when handling the unit or its sub-assemblies.

Important

To configure the unit, you must install the software onto a desktop/ laptop running Windows XP-SP3, 2003-SP2, Vista-SP2,

Windows 7.

2 bay unit front view

Disk Drive

Drive Carrier

Drive Status LED

Drive Activity LED

Ethernet Activity

LED

Power button

System Status LED

3

2 bay unit rear view

4 bay unit front view

4

Disk Drive

Drive Carrier

Drive Status LED

Drive Activity LED

Power button

System Status LED

Ethernet Activity

LED

4 bay unit rear view

4 bay unit front view (S-series)

5

Cooling Fan

RJ45 Network

Connection

USB Connections

Power Supply Fan

Power Connection

Disk Drive

Drive Carrier

Drive Status LED

Drive Activity LED

System Status LED

Ethernet Activity LED

4 bay unit rear view (S-series)

Step 2: Disk Drive Installation

Power Button

Cooling Fan

USB Connections eSATA Connection

RJ45 Network

Connection

Power Connection

You can populate this unit with SATA 1.5 Gb/s or 3.0 Gb/s disk drives. For optimal performance, install disk drives of the same model and capacity.

Your disk drives will become a RAID Volume on this unit.

1. Open the lid on the front of the unit enclosure.

2. Pull a disk drive carrier from the enclosure. See the front view figure.

3. Carefully lay the disk drive into the drive carrier, making the screw holes on the sides of the carrier align with the screw holes in the drive.

4. Insert the screws through the holes in the drive carrier and into the sides of the disk drive.

 Install only the counter-sink screws supplied with the unit.

 Install four screws per disk drive.

 Tighten each screw until snug. Be careful not to over-tighten.

5. Reinstall the drive carrier into the unit enclosure.

6. Repeat step 2 through 5 for the other disk drive.

7. Close the lid on the front of the unit.

6

Step 3: Connecting to the Network

1. Attach one end of the network cable to the RJ45 network connection.

See the rear view figure.

2. Attach the other end of the network cable to your Ethernet hub or switch.

Important

If there are multiple networks at your facility, note the network to which you connect the unit. You will need this information during the setup process.

Step 4: Connecting the Power

1. Attach the power cord from the power source to the power adapter.

2. Connect the power adapter to the back of the unit enclosure. See the rear view figure.

3. On the front of the unit, press the power button. See the front view figure.

It takes about a minute for the unit to fully power up. After power-up:

 The System Status LED turns green. See the front view figure.

 The buzzer beeps one time.

Step 5: Software Installation

1. Insert the CD into your CDROM.

2. Double-click Setup.exe to begin installation.

3. Click the Next button to go on installation.

4. Click the “I accept the terms of the license agreement” option, and then click the Next button.

5. Insert your “User Name” and “Company Name” then click the Next button.

6. Select the setup type, and then click the Next button.

7. Click the Install button to proceed with installation.

8. When above-mentioned installation processes are finished, a final installation screen appears. Click the Finish button to close the installer.

7

Step 6: Setting up the Unit

The software Install Wizard performs the setup procedures on your unit.

After the procedure, you can begin using this unit.

1. Startup > NUUO NVRmini > Install Wizard.

2. This program will show the default language setting and initiation mode.

3. Choose preferred language and initiation mode, and then click the Next button.

 Express Mode : you don’t need to set the date, time, network settings, and RAID level. (After step 5, jump to step 9 directly.)

 Advance Mode : you need to set your specific date, time, and network settings.

4. Install Wizard program will search all the units on the Internet right now.

Choose one of them, and then click the Next button.

8

5. Enter your password, and then click the OK button.

Note

The default Administrator password is “admin”.

6. Set the time zone, date, and time, and then click the Next button.

9

7. Choose the network settings, and then click the Next button.

 Obtain network settings automatically from DHCP server or wizard : apply settings (such as IP, net mask, gateway, DNS) which are automatically generated by the DHCP server.

 Make network settings manually : individually select your specific settings.

8. If you need to set a new disk(s), check the “Create new storage” option.

After checking, click the Next button.

10

 Data Protection : set the RAID level to RAID 1 (2 bay). Set the RAID level to RAID 5 (4 bay).

 Maximum Capacity : set the RAID level to RAID 0 (2 bay). Set the

RAID level to RAID 0 (4 bay).

9. Review your settings. If the settings are correct, click the Finish button to finish the settings selection process.

Caution

Once you have finished the setting selection process, the unit will start working. In order to assure the stability of the unit, do not pull any disks out when the system is running.

11

1.2 LED Status Definitions

 System Status LED

Definition

Green

Healthy

 Drive Status LED

Definition

Green

Healthy

 Drive Activity LED

Definition

Blink

Activity



Ethernet Activity LED

Definition

Green

Link

Red

Fail

Red

Fail

Amber

Critical

Amber Dark

Rebuilding Without disk

No blink

No activity

Blink

Accessing

12

2. Settings

After setting up the unit, log in to the system by entering its IP address in the browser (Internet Explorer 7 or above). When connecting, choose your language, enter the user name and password, and then begin using this system.

There are five main functions of this unit: settings, live view, playback, help, and logout. They will be shown on the top of the page.

2.1 Camera Setup

2.1.1 Add Cameras by Camera Search

The function enables user to automatically search and add cameras in the same network. There are two search mechanisms, one is UPnP, another is

camera search tool . Before searching UPnP cameras, make sure that the

cameras possess UPnP function.

1. Open Internet Explorer and log in to the unit.

2. Click IP Camera/ Camera Settings.

3. Click the Camera Search tab.

4. Click the Search button.

13

5. The system will list all the currently available cameras. The inserted cameras are shown in blue. Click the icon to add a camera into your camera list.

6. After clicking the icon, the camera setting page will pop up. Click the item to which you want to add a camera.

7. Insert the camera name, user name, and password.

Vendor Model Name

14

Note

Some cameras will limit the login authority to the administrator. In this condition, you need to change the user name and password to the administrator’s to log in to those cameras.

8. Click the Add button to add it.

9. After clicking the Add button, the updated camera list will be displayed in the Camera Setting tab.

Vendor Model

10. Repeat steps 5 through 8 to add other cameras to your list.

2.1.2 Add Cameras Manually


2. Click IP Camera / Camera Settings.

3. Click the Camera Settings tab, and the camera list will be displayed on the bottom of the page.

4. Click the item to which you want to add a camera.

5. Enter the camera’s information.

15

 Camera name : The name of the camera.

 Address : The IP address.

 Port : The transmission port.

 User name : Login user name.

 Password : Login password.

 Camera Channel : Select the number of analog cameras supported by one video server from the list.

 Protocol : Data transmission protocol.

 Vendor : Camera vendor name.

 Model : Camera model name.

Note

Some cameras will limit the login authority to the administrator only. In this condition, you need to change the username and password to the administrator’s to log in to those cameras.

6. Click the Save button.

 Save : Save the information of this camera.

 Reset : Return to the latest saved settings of the selected camera.

 Clear : Set all the settings to default value.

 Auto Detection : After inserting IP address, port, user name, and password, click this button to automatically detect all of this camera’s information. (such as Channel, Protocol, Vendor, and Model)

7. Repeat steps 4 through 6 to add other cameras into your list.

16

2.1.3 Modify Camera Information


2. Click IP Camera / Camera Settings.

3. Click the Camera Settings tab.

4. Click the camera which you want to modify.

5. Modify the information of this camera.


7. If you want to replace a camera, click that camera, modify its address, port, user name, and password, and then click the Save button.

2.1.4 Modify Camera Parameters


2. Click IP Camera / Camera Parameters.

3. Click the Camera Parameter tab.

4. Click the camera which you want to modify in the camera list.



17

 Camera Name : The name of the camera.

 Video Format : Select the type of format which this camera supports.

 Frame rate : Choose the frame rate of the camera.

 Resolution : Choose the resolution of the camera.

 Quality : Choose the image quality of the camera.

 Audio : Check the Enable Audio option to view and enable audio recording.

Note

If the selected frame rate is higher than the camera’s maximum frame rate, the system will automatically adjust the frame rate downward to the maximum.

2.1.5 Set up Lens Settings



3. Click the Lens Settings tab.

4. Click the camera which you want to modify in the camera list.



 Camera Name : The name of the camera.

 Lens Type : There are two types of lens currently, ImmerVision and

Vivotek (FE8171V). You are not allowed to select type so far, type

18

depends on camera model.

 Lens : Enable or disable lens function.

 Camera Position : Choose the position of the camera.

Note

If users enable the lens while lens is not installed correctly or not even installed, a warning message will pop up as a notification if users are trying to operate lens on liveview page.

2.1.6 Set up 2nd Stream

Stream profile is designed for mobile client and lower fps live stream display.

Without stream profile integration, users cannot watch live video on mobile client nor select lower fps stream on liveview. Further, for performance consideration, we fix the resolution and framerate for each brand/series.

You can refer to appendix for supporting list.



3. Click the 2nd Stream Settings tab.

 Stream Profile : The default status is Disable. If you want mobile client user to access to this camera, you can select Enable, and click

Save button in the middle of the page.

 Low Profile : The stream profile, under 300kbps, is designed for

19

mobile client single-view.

 Minimum Profile : The stream profile, under 100 kbps, is designed for mobile client multi-view.

2.1.7 View Camera Status


2. Click IP Camera / Camera Status.

3. Click the Camera Status tab.

 Conn. Status : The status of the connection. Click the Connect or

Disconnect button to change the connection status.

 Rec. Status : The set recording schedule of this camera in this time.

 Framerate : The frame rate of this camera.

 Bitrate : The transmission bit rate of this camera.

 Estimated Remaining Recording Time : Estimated remaining recording time is dividing the current free capacity by dynamic total bitrate.

Note

If your total bitrate becomes red, it means that the loading of the system is too heavy.

20

2.2 Recording & Event Setup

2.2.1 Recording Mode Setup


2. Click Recording & Event / Recording settings.

3. Click the Recording Mode tab.

4. If selecting Always Recording, the chosen cameras will begin to record immediately.

 No Recording : Turn off the recording.

 Recording by Schedule : Recording by schedule.

 Always Recording : Permanently turn on the chosen cameras.

 Automatic Recycle : Check the Enable option to recycle disk space automatically when the disk space is full.

 Keep Video : Set a period during which the recorded video clips will be kept intact.

2.2.2 Recording Schedule / Event Setup

Instead of Always Recording, you can begin the recording by setting the

Recording Schedule.


2. Click Recording & Event / Recording Settings.

3. Click the Recording Schedule tab.

4. Check the Day or Week mode.

 Day : Schedule the cameras to turn the recorder on and off at the

21

same time every day according to your setting.

 Week : Schedule the cameras for each day of the week differently.

5. Click the schedule of the camera which needs to be modified.

6. Click the column on the bottom of the page.

 Insert : Insert new schedules.

 Delete : Delete the selected schedule.

 Configure : Modify the schedule and recording mode settings.

 Copy : Copy current Day Schedule to other channel(s); copy current

Week Schedule to other day(s) of a week or to other channel(s).

22

7. The default setting of the camera’s recording schedule is from 00:00 to

24:00. If you want to modify the time slot, click the Configure button to modify the default settings first.

8. Choose the recording mode.

23

 Always Record : Always record.

 Record on Event : Record when events triggered. The event can be triggered by Motion or Digital input.

Note

When setting the event Motion, please first ensure that the motion detection function in your camera has been enabled.

9. If you want to add another new schedule, click the Insert button to add a new one.

10. Repeat step 9 to add other new schedules.

11. Repeat steps 5 through 9 to set other cameras.


Note

When changing the motion detection settings of a camera, make sure to disconnect your unit and that camera first. Once you have finished, re-connecting them will update the settings in your unit.

24

Note

When setting an event, Motion or Digital input can be triggered from other cameras. This means that if the system detects motion or digital input from other cameras or I/O Box, the camera

will begin recording.

Note

There is another way to set the schedule. If you want to change the recording time length, drag the end of the time bar from 24:00 back to the length you wish, and then drag the beginning of the time bar to the point at which you would like it to commence recording. (You may also click the Insert button to add new schedules.)

25

2.2.3 Camera Events and Responding Actions Setup


2. Click Recording & Event / Event & Action Management.

3. Click the Event & Action tab.

4. Choose the camera, and then select one of the three events.

 Connect lost : When a connection between the camera and this unit

26

is lost, the system will trigger an action.

 Motion from Camera : When video motion is detected, the camera triggers an action.

 Input : Any external input can trigger an action.

Note

When setting the event Motion from Camera, make sure to set up the camera’s motion detection function first. Besides, event log will be recorded only if event is selected on this page.

5. Click the Configure button to enable the event and select the active period.

 Always Actived : The selected event is always active.

 Actived only in the following period : The selected event is only active in the designated time, which able to cover two days e.g. from

18:00 to 09:00.

 I/O Type : Check one of the options of I/O type. N/O means normal open, while N/C means normal close.

6. Click the Add button to set up the responding actions of this event.

27

 Output : When an event occurs, the system will send an output signal to other connected devices.

 E-Mail : When an event occurs, the system will send e-mail notifications. Make sure to add an e-mail address first.

 CMS : When an event occurs, the system will send out a signal to

CMS. CMS will highlight this event.

7. Click the action, and then click the Configure button to modify the details of that action if necessary.

8. Repeat steps 6 and 7 to add more actions.

9. Repeat steps 4 through 7 to set up more cameras.


Note

After selecting camera events, the event information will display on the screen when it ’s triggered.

2.2.4 I/O Box Input and Responding Action Setup




28

4. Select an input of I/O Box from list.


6. Click the action, and then click the Configure button to modify the details of that action if necessary.

 Output : When an input is triggered, the system will send an output signal to other connected devices.

 E-Mail : When an input is triggered, the system will send e-mail notifications. Make sure to add an e-mail address first.

 CMS : When an input is triggered, the system will send out a signal to

CMS. CMS will highlight this event.

 Show on Camera : When an input is triggered, the system will show an alert message on selected camera(s) of screen.

7. Repeat steps 5 and 6 to add more actions.

8. Repeat steps 4 through 6 to set up more inputs.


29

2.2.5 System Events and Responding Actions Setup




4. Click System to unfold the list of system events, and then select one of the five events.

 Abnormal disk status : When there is no enough disk space for recording or when disk is abnormal for accessing, the system will trigger an action.

 Daily System Report : Enable users to know the system information,

HDD usage, and Disk status everyday through E-mail without accessing to the unit to check.

 Unable to access FTP : The action will be triggered when the connection between the unit and FTP server is lost.

 Backup unfinished : If there is any file which the system didn ’t complete the backup process, the file(s) name will be listed and send out through E-mail after finishing the last file of this backup schedule.

 Power-on Notification : Record the time as power was turning on.


30

Follow the steps in the previous section.


Note

E-Mail is the only one action to the event Daily System Report,

Unable to access FTP, Backup unfinished and Power-on

Notification. In addition to select a contact, remember to insert the time of sending daily system report.

2.2.6 SMTP Server Setup


2. Click Recording & Event / E-Mail.

3. Click the SMTP Server tab.

 Server Address : SMTP (Simple Mail Transport Protocol) server IP

31

address.

 Port : SMTP port.

 Sender : Sender information.

 Subject : Subject.

 Body : E-Mail content.

 SMTP Authentication : Before sending out an E-Mail, enter the user name and password for SMTP authentication.

 User Name : User name.

 Password : Password.

4. Click the Send Test Mail button and the system will send a test mail to the sender. Check it after testing.


2.2.7 Add Event Contacts


2. Click Recording & Event / E-Mail.

3. Click the Contactors tab.

 Add Contactor : Add this new contact into the contact list.

 Reset : Return to the latest saved settings of the contact list.

 Save : Save this time modification of the contact list.

4. Insert the name of a new contact.

5. Insert the e-mail address of this new contact.

6. Click the Add Contactor button.

7. Click the Save button to save this modification of the contact list.

32

2.3 RAID & File Settings

2.3.1 View RAID Volume Status

RAID status refers to the disk drives on your unit and how they are arranged into a RAID Volume.


2. Click RAID & File System / RAID Management.

3. Click the RAID Status tab to view the status of your RAID Volume.

 RAID Name : Name of your RAID, automatically assigned when it was created.

 RAID Level : RAID 0, 1, 5, or 10, specified when it was created.

 Capacity : data capacity of the RAID Volume in GB.

 RAID Status : Functional is normal. Critical means one disk drive has failed. Offline means you cannot access your data.

 Action Status : Idle is normal. Rebuilding means the RAID Volume is being rebuilt after a disk drive failure. Migrating means the RAID

Volume is adding a disk drive or changing RAID levels.

 Background Activity : None is normal. Running means a background activity is in progress.

2.3.2 View Disk Drive Information



3. Click the RAID Status tab.

4. Click a disk icon to view the disk drive information.

33

2.3.3 Migrate a RAID Volume

To migrate a RAID Volume means to change its RAID level or to add disk drives.



3. Click the Modify tab.

4. From the Current Volume drop-down menu, choose the RAID Volume which needs to be modified.

5. In the Migrate to RAID Level drop-down menu, choose the target RAID

34

Level.

6. To add disk drives, highlight disk drives in the Free Disks column and click the >> button to move them to the Disks in RAID column.

7. Click the OK button to finish it.

With those steps, the RAID Volume is modified as you directed. Migration requires several minutes, depending on the type of modification taking place and the size of your disk drives.

During the modification, your RAID Volume and all of the folders on it are fully accessible.

After the migration is completed, you must extend the file system so as to use the storage space you have added. You can extend the file system immediately or wait until later.

8. Click the RAID & File System / File System Management.

9. Click the Extend File System button.

2.3.4 Create a RAID Volume

In this system, the term RAID Volume refers to one or more disk drives working together as a RAID logical drive. You must have unassigned disk drives in your unit to create a new RAID.



3. Click the Create tab.

35

4. From the RAID Level drop-down menu, choose the RAID level you prefer for your disk array.

5. Highlight disk drives in the Free Disks column, then click the >> button to move them to the Disks in RAID column.

6. Click the OK button.

The RAID Volume is created and formatting begins. Formatting requires several minutes, depending on the size of your disk drives.

Important

After setting the RAID level and disks, we recommend not changing the number of disks. Changing the number of disks requires a re-creation of the RAID level, which will destroy all of your data.

Important

To reduce the possibility of having problem to access public folder in the unit, before creating new disk volume or modifying volume, please delete the invalid volume if any.

Note

If you use Express Mode when using the Install Wizard, the disk(s) will be set to RAID 1 (2 bay) or RAID 5 (4 bay) automatically. If you use Advance Mode when using the Install

Wizard, the disk(s) will become the RAID level you set.

2.3.5 Designate a Spare Drive

If you have an unassigned disk drive, you can assign it as a spare drive.

1. Insert the unassigned disk drive.



4. Click the Create tab.

5. From the RAID Level drop-down menu, choose Spare Disk.

36

6. Highlight a disk drive in the Free Disks column and click the >> button to move it to the Disks in RAID column.


2.3.6 Delete a RAID Volume



3. Click the Delete tab.

4. Click the option button beside the RAID Volume you want to delete.


6. A confirmation dialog pops up. T ype “YES” into the field, and then click the OK button.

7. After a RAID Volume is deleted, you need to reboot the unit.

Caution

When you delete a RAID Volume, you delete all the folders in the

RAID volume and all the data saved in the folders. Backup any important data before deleting a RAID Volume.

37

Note

You cannot delete a RAID Volume while a background activity is running, such as Migration or Rebuild. Wait until these activities are completed.

2.3.7 Recover

For the purpose and usage of recover, you c

an refer to Respond to an

Invalid RAID Volume.

2.3.8 View Protocol Status

There are another two ways to access the recorded data in the unit: through Workgroup or through FTP. Follow the following steps to view the status of these two ways.


2. Click RAID & File System / Protocol Control.

3. Click the Information tab.

2.3.9 Modify the “My Network Places” Protocol Settings



3. Click the Windows tab.

4. Check and enter the unit’s information.


38

 Services : Whether users can access this unit through Windows

Explorer or not.

 Computer Name : The name of this unit, which is set in the Setup tab in the Network Setup function.

 Computer Description : The name which will be displayed in

Windows Explorer.

 Domain or Workgroup Name : T he name of this unit’s workgroup.

2.3.10 Modify the FTP Protocol Settings



3. Click the FTP Sharing tab.

4. Check and enter the settings of this unit.


 Services : Whether users can access this unit through FTP or not.

 Command Port : The port for commands between a server and a client.

 Passive Ports : The data transmission port of passive mode.

39

 Client Coding Type : If your FTP client uses double-byte characters but does not support Unicode, choose your FTP client’s encoding from the Client Coding Type drop-down menu.

2.4 Auto Backup

This feature enables you to automatically backup the recorded video of the previous date to FTP site. There are two steps to enable the function, one is Set up Backup Schedule, another is Set up Backup Server.

2.4.1 Set up Backup Schedule


2. Click RAID & File System / Auto Backup Management.

3. Click the Backup Schedule tab.

4. Set up backup schedule, select the backup channels, and check the

Enable option to enable Auto Backup.

 Auto Backup : Check the Enable option to enable this function.

 Daily Backup Time : The daily scheduled time to start backup process.

 Start Time : The start time of recorded video of the previous date.

 End Time : The end time of recorded video of the previous date.

 Camera : Select the channel(s) to backup.

5. Current Event Settings shows the condition of the events of auto

40

backup

– enable or disable. Follow the steps of System Events and

Responding Actions Setup to configure the event & action.

Note

The system backups recorded video files one by one. If the connection between the unit and FTP server is normal, but some problems of FTP causes the system unable to write files on FTP, the system would try each file three times before starting to backup the next file. If the connection is lost, the system would wait for the connection, so no file would be skipped.

2.4.2 Set up Backup Server


2. Click RAID & File System / Auto Backup Management.

3. Click the Backup Server tab.

4. Set up the FTP server and create a folder for backup files. The folder format is “FolderName”, “FolderName/SubFolderName”, and so on.

For example: AutoBackup/NVR

5. After setting up all the information, click the Test FTP button and the system will create a folder to FTP. Check it after testing. In this case, the route of the tested file will be:

ftp://nuuo.dnsalias.com/AutoBackup/NVR/NVRmini_ComputerName

41


Note

Make sure the FTP account with privileges of administrator who is able to upload, rewrite, delete files, and create new folder.

Besides, make sure the FTP server has enough space for auto backup.

Note

To avoid the failure of auto backup, please check the normality of

FTP server regularly (e.g., enough space for video, system conditions.).

2.5 Network Setup

2.5.1 View Network Status


2. Click Network Setup / Network Setup.

3. Click the Information tab to display the unit’s network information.

42

2.5.2 Network Settings



3. Click the Setup tab to set up the network settings of your unit.

 Computer Name : Name your unit.

Note

Because of the internal data modifications required, it will take a few minutes to change the name of your unit. During this period, it will not be possible for you to access your unit. There is no need to restart the unit; simply wait until it is possible to re- access.

 Ethernet Link Speed : Select the LAN transmission speed you prefer.

(4 bay)

43

 Internet Protocol : Check whether you want to apply a specific internet protocol to your unit.

 IP Address : IP address of this unit.

 Subnet Mask : Subnet mask address.

 Default Gateway IP Address : Gateway IP address.

 Primary DNS : Primary DNS (Domain Name System) address.

 Secondary DNS : Secondary DNS address.

4. Click the Jumbo Frame tab to use the unit’s maximum transmission settings.

 Ethernet Link Mode : Full duplex or half duplex transmission.

 Ethernet Link Speed : Transmission speed.

 Maximum Transmission Unit : Limit the maximum transmission size.

If the transmission package is larger than this setting, the system will divide it into smaller packages when transmitting.

5. Click the Port Setup tab to set the port of your unit.

6. Click the DDNS Setup tab to enable Dynamic Domain Name Server function, allowing you to connect unit with dynamic IP address.

44

2.5.3 Auto Port-Forwarding

This function is designed for saving time in port configuration on router if users want to access the unit (in LAN) from WAN. Once enabling UPnP

Service on router, users can do port-forwarding for setting page (default:

80), liveview (default: 5150), playback (default: 5160), and CMS (default:

5170) automatically.



3. Click the UPnP Port-Forwarding tab.

4. Click the Search button, and the searched routers will be listed.

5. Select the searched router, and all UPnP ports configured on this router will show under the UPnP Port Forwarding List.

45

6. After selecting one of searched routers, click the icon to set up port-forwarding to this router automatically. You will find ports of setting, liveview, playback and CMS are listed.

Caution

For security reason, the privilege of UPnP port-forwarding is

LOWER than port-forwarding configured on router. Therefore, if the ports have been used on router, we are unable to know before finding out access failure.

46

Note

UPnP port-forwarding is for temporarily use only. Most of UPnP router will clean up all UPnP ports after router reboots.

Furthermore, for some routers, if the port you want to add has already been used for other devices in the same way (UPnP port forwarding), this “enable” action will cover over the settings.

2.5.4 Network Service Setup


2. Click Network Setup / Network Service.

3. Click the Live View & Playback Service tab.

 Live Streaming Server

 Port : Live streaming transmission port.

 Maximum Connections : Maximum connections from remote access.

 Playback Server

 Port : Playback transmission port.

 Maximum Users : The number of users who can access playback

47

functions at the same time.

 Log Access : Check to record playback access information on

NVR Log page, including access time, playback video channels, and time frame.

 Allowed/ Blocked List

 Allowed List : Only IP addresses from the allowed list are allowed to log in.

 Blocked List : IP addresses from the blocked list will be unable to log in.

Note

When setting Maximum Connections in Live Streaming Server settings, 1 connection means that only 1 user can connect to only

1 camera. If the maximum connections value is set to 16, and each user connects to 4 cameras, the allowed connections per user will become 4, rather than 16.

2.5.5 CMS Service Setup


2. Click Network Setup / Network Service.

3. Click the CMS Service tab.

 CMS Server : Check the Enable option to enable CMS service.

 Port : the port number through which the CMS connects to this unit.

 Maximum Connections : The maximum number of allowed CMS connections.

48

2.6 Management

2.6.1 View the List of Users

1. Open Internet Explorer and login the unit.

2. Click Management/ User Management.

3. Click the Create New Users tab.

4. The list will be displayed on the bottom of the page.

2.6.2 Create New Users

1. Open Internet Explorer and login the unit.

2. Click Management/ User Management.

3. Click the Create New Users tab.

4. Insert the user name of this new user.

5. Insert the password of this new user.

6. Choose the group of this user.

 Power user : Power user can do all the settings except the Network

Settings, RAID Settings, and Management function.

 User : User just can change his/her password and do the live view and playback functions.

49

 Guest user : User can do live view and playback function only.

7. Select the live view cameras which this user can access.

8. Select the playback channels which this user can access.

9. Check whether this user can backup or delete recorded data.

10. Click the Create New User button to finish it.

Note

The Administrator will be the only user who can use all of the functions. There is a default administrator account in the system, and you cannot create another “Administrator” account.

2.6.3 Modify User Information


2. Click Management / User Management.

3. Click the Modify Users tab.

4. Click one of the users in the User List on the bottom of this page.

5. Change the group of this user.

6. Select the live view cameras which this user can access.

7. Select the playback channels which this user can access.

50

8. Check whether this user can backup or delete recorded data.

9. Click the Modify User button to finish it.

2.6.4 Change a User’s Password



3. Click the Change Password tab.

4. Choose the user.

5. Enter a new password.

6. Enter this new password again.


2.6.5 Delete Users

Except for the administrator, you can delete any users with the following steps.



3. Click the Modify Users tab.

4. Click the Delete icon of the user you want to delete.

5. In the confirmation box, click the OK button.

51

2.6.6 Online License Activation

There are two types of license currently, camera license for 2ch-device and

POS license for 2bay and 4bay S-series device. With the former license upgrade, the device possesses up to 4ch capacity. With the latter license upgrade, users can use

POS function.

There are two ways to activate license, online and offline.


2. Click Management / License Management.

3. Select Online as the Activation Type, input serial number, and click the

Activate button.

4. The license will be updated in License List if activated successfully.

System will reboot automatically.

52

2.6.7 Offline License Activation

If the device is set up in Intranet (Local LAN) without Internet connection, there is another way to activate license.


2. Click Management / License Management.

3. Click the Export button under the section of Offline Activation to export the information of this unit.

4. Download dialog pops up. Save the request file and take it to other PC which is connected to the Internet. Furthermore, the PC should be installed OffLineTool.exe which can be found from NVRmini tool kit v2.5. ftp://nvrmini:[email protected]/NVRmini v2.5 AP.zip

53

5. Execute the OffLineTool.exe in that PC with Internet connection, and select the request file offline.req.

6. Input the serial number, click the Activate button, and save the .dll file

offline_license.dll.

7. Import the license file to the unit.

8. The license will be updated in License List if activated successfully.

System will reboot automatically.

54

2.6.8 View the Event Log


2. Click Management / Log System to find the event list of your unit.

There are four kinds of event which will be listed on this page.

 Hardware Log : The log information of the operations to your unit, such as reboot or shutdown.

 NVR Log : The log information of the NVR system, such as system, recording, user access information, POS and auto backup.

 NVR Event Log : T he log information of the “Event & Action

Management”, such as motion detection or camera connection lost.

 Backup and Export Log : The log information of the track of video data exported and backup.

Note

The NVR Event Log will be recorded only if event is selected on

Event & Action Management page. As for user access

information, please go to Network Service to c

heck Log Access box to enable this function.

2.6.9 Save Unit Configuration

Save configuration can let you save the settings of this unit. These settings can be applied to other units, which will let you set other units more easily.

55


2. Click Management / Save / Load Configuration.

3. Click the Save Configuration tab.

4. Choose the volume.

5. Choose the folder which the configuration file will be generated into.

6. Insert the file name.

7. Check the box of E-Map Settings or POS Settings if you want to keep the configuration.


9. The configuration file will be generated into the chosen folder.

2.6.10 Load Unit Configuration / Default Settings

Load configuration can let you apply another unit’s settings to the current unit. Load Default Settings will revert all of the unit’s settings back to the default factory settings.

1. Find your unit through Windows Explorer (insert “\\” plus the IP address of your unit).

2. Use the administrator’s ID to log in.

3. Put the configuration file into the folder “public” in your unit.


5. Click Management / Save / Load Configuration.

6. Click the Load Configuration tab.

56

7. Check the Load Configuration or the Load Default Settings option. If choosing Load Default Settings, jump to step 11 directly.


9. Choose the folder “public”.

10. Select upgrade file or insert the file name.

11. Check the box of E-Map Settings or POS Settings if you want to restore the configuration.


13. In the confirmation box, type “YES” into the field provided, then click the

OK button.

14. The system will begin to load the settings into your unit.

Caution

If there is POS database existed in NVRmini, loading configuration with different POS application config is likely to make the original POS data unsearchable.

Caution

In the condition of saved configuration is without E-map or POS settings, selecting loading configuration with E-map/POS settings will lead you get the default. The original E- map/POS settings (if any) are covered and untraceable.

Note

User account and privilege will be kept even if loading default setting, while camera settings, recording schedule, event & action settings, E-mail setting and server settings won ’t be.

57

2.7 System

2.7.1 View System Information


2. Click System / System Information.

3. Click the System Information tab.

The system information includes the following items.

 Operating System : Embedded Linux

 OS Version : OS version

 NVR version : NVR system version

 CPU : CPU model number

 Network Adapter : Network type and speed

 MAC Address : MAC address of this unit

 Network Flow : Input/ output network flow

 Locate : The buzzer in the unit will sound to let you know where the unit is.

2.7.2 View Enclosure Information



3. Click the Enclosure Information tab.

58

The enclosure information includes the following items.

 CPU temperature : Normal range <= 58℃

 System Fan Speed : Normal range >= 1800 RPM

 Power Status 5V : 4.75 V <= normal range <= 5.23 V

 Power Status 12V : 11.00 V <= normal range <= 12.94 V

Power Status 3.3V

: 3.12 V <= normal range <= 3.46 V

Note

If any value is out of specification, see Check Enclosure Status

for details.

2.7.3 Upgrade the System


2. Use the administrator’s ID and password to log in.

3. Put the upgrade file into the folder “public” in your unit.


5. Click System / System Upgrade.

6. Click the Firmware Upgrade tab.

59



9. Select upgrade file or insert the entire file name, including the extension name.


11. The system will begin the upgrade process.

12. After upgrade, the system will restart. You need to re-access the unit again after this.

Caution

If the current FW version is v1.0 (NVR FW: 01.00.XXXX.951), please upgrade to v1.2 (NVR FW: 01.00.XXXX.1247) before upgrading to further versions.

FW version reference: http://support.nuuo.com/mediawiki/index.php/NVRmini_versions

2.7.4 System Date and Time Setup


2. Click System / Date / Time.

3. Click the Setup tab.

60

4. Choose the year.

5. Choose the month.

6. Choose the day.

7. Choose the time.


Caution

When you modify the date or time of the system, the system may find the wrong data when searching the recorded data. Backup the recorded data before changing the time.

Note

After you modify the date or time of the system, system will restart automatically.

2.7.5 Daylight Saving Time Setup


2. Click System / Date / Time.

3. Click the Time Zone tab.

4. Check the Adjust clock for daylight saving changes option.

5. Choose the increment for daylight saving time in your location.


2.7.6 Enable and Disable the Buzzer

There is a buzzer in the unit. When the unit finishes booting or when a problem is detected, this buzzer will sound. This buzzer is enabled by

61

default. You can disable/enable this buzzer with the following steps. (We recommend that this buzzer should be enabled.)


2. Click System / Buzzer.


4. Check the Enable or Disable option.


2.7.7 View UPS Status

If you have an APC Uninterruptable Power Supply (UPS) attached to your unit, you can check its status with the following steps.


2. Click System / APC UPS.

3. Click the Information tab.

The Information tab displays the status of the UPS. If there is no UPS connected or recognized, the Service St atus field reports “NO UPS.”

62

2.7.8 UPS Setup

This feature enables you to tell your unit how long to run on UPS battery power and when to shutdown, after a power failure.

1. Attach the APC UPS to one of the unit’s USB ports.


3. Click System / APC UPS.


5. Click the option button beside the shutdown option you want:

 Disable : Run until the UPS battery is depleted

 System shutdown on the remaining battery percentage : Run until the UPS battery remains this percentage.

 System shutdown after the UPS has run on batteries : Run on the

UPS battery for a certain period of time.

6. If you choose battery percentage, enter a percentage amount in the % field.

7. If you choose running time, enter the number of minutes into the Mins. field.


2.7.9 Auto Power On

Automatically turn on the power when power resumes after power loss.


2. Click System / Power

63

3. Check the enable option.


2.7.10 Restart the Unit


2. Click System / Reboot / Shutdown.

3. Click the Options tab.

4. Check the Reboot option.



The restart procedure runs automatically. When the unit is fully online:

 The system status LED turns green (right)

 The buzzer beeps one time (if the buzzer is enabled)

Note

During system restart, none of your files will be accessible from your desktops / laptops.

64

2.7.11 Shut Down the Unit

The only time you need to shut down the unit is to replace the disk drive cooling fan or the power supply. During and after the shutdown, none of your files will be accessible from your desktops / laptops.

 Shutdown by Software


2. Click System / Reboot / Shutdown.

3. Click the Options tab.

4. Check the Shutdown option.



 Direct Shutdown

1. Press and hold the power button for 5 seconds on your unit’s front panel.

2. The system status LED will turn red.

65

3. POS

3.1 Introduction

3.1.1 System Introduction

NUUO POS, a Point of Sales Systems based on NUUO

NVR/DVR/NVDR/NAS , provides financial transaction’s surveillance solution in one central system. The architecture is as below; POS transaction data flows to NAS by Ethernet. Each Cash Register with an external receipt printer is connected by DB9 cable. The transaction information delivered in R232 format can be converted to Ethernet through

SCB-C31A POS data capture converter.

Terms

POS Original Data

Definition of Terms

Definition

Original data from POS. Usually with a lot of symbols and no line feed.

POS Transaction Filtered result by user-defined tag-filter.

Product Specification

NUUO POS Box

Input

Output

DC In

SCB-C31A

RS232

Ethernet

DC +10V to +15V

Power consumption 500 mA

Operating Temperature -20 to 65℃

Operating Humidity 0-90 % Non-Condensing

66

Baud Rate

Data Bits

Stop Bits

Parity

Flow Control

110 bps to 230.4 kbps

5, 6, 7 or 8

1, 1.5 or 2

None, Even, Odd, Mark, Space

None, RTX/CTS, XON/XOFF, DTR/DSR

3.1.2 Hardware Installation – SCB-C31A

To connect Cash Register, Printer, and SCB-C31A POS data capture converter together, please follow below steps:

Step 1: Please refer the user manual to setup Cash Register and printer.

Step 2: Using a “Y-shape” DB-9 cable, one DB-9 female connect to POS system and one DB-9 male connect to the receipt printer Y-shape

(provided by Printer vendor).

Step 3: Using another DB-9 female connect to SCB-C31A POS Data

Capture R232/Ethernet converter with Null modem.

Note

There are two kinds of serial cable: Straight pass-through and

Null-Modem. The connection between SCB-C31 POS Data capture box and Y-cable must be null modem (in package).

Step 4: Check the system switch of the SCB-C31A is switched to OFF-OFF position.

Step 5: Connect SCB-C31A with power source.

Step 6: Connect SCB-C31A with internet port by RJ45 LAN cable.

67

Cash register

Printer

Y-cable

F

Null Modem

M F

M

Provided by printer

F

SCB-C31A

Ethernet

The LED Indicators:

LINK LED: Ethernet cable connection and data active.

RUN LED: System is ready (Blinking).

Serial 1: Transiting/Receiving Indicator.

3.1.3 Software Installation – SCB-C31A

68

Step 1: Use IE-browser to setup SCB-C31A, the default IP address is

192.168.1.1

Step 2: Setup IP address and password in Server page, and click the Save button.

Note

Each time you switch the page of the web, please click Save at first. If you leave this page without saving, all changes will be ignored.

Step 3: Setup Password if needed. Password is only using to activate a security feature on the serial server. Once a password is entered it will be required to access the menu and make change of configuration when access.

Note

Please write down the Serial number and MAC address, these two parameters are necessary when user forget your password.

Step 4: Setup according to your POS or Cash Register. Usually all devices are default setting, you can reserve your time to pass this step.

69

Step 5: Please restart/reset the box after changing configurations to active setup.

To reset the unit manually apply power, insert a small plastic tool, and press lightly depressing reset located between the switch. Hold for 3 seconds and release. The Link and Run light will go out and turn back on. The SCB-C31A will revert to the last setting.

Note

Every time you change the configuration of SCB-C31, please check above setting, especially maximum connection and

Remote IP address to avoid connection fail.

3.1.4 Connection via TCP Client

If the cash register possess network, please install system according to following diagram and purchase a POS license to activate this function.

NVRmini

3.2 Software Setup

3.2.1 Activate POS License

If you are not the SCB-C31 user, you need to activate POS license before

starting the following settings, please refer to License Activation for

details.

3.2.2 NVR POS Setting


2. Click POS & I/O / POS Settings.

70

3. Click the Settings tab to set POS application.

 Data Source : List of all the data sources.



Insert : Click to insert POS and do the POS settings. See

Insert POS Setting for details.

 Delete : Click to remove the selected POS from the list. See

Delete POS Device for details.

 Configure : Click to configure the selected POS and modify the

POS settings. See Configure POS Setting for details.

 POS info : The setting information of the selected POS on this window.

71

 Name : Name of the POS data source.

 IP : IP of the POS data source.

 Serial Box : The serial box data source used.

 Tag Filter

: Tag type to filter the data from POS. See Tag Filter for

details.

 Associated Cameras : List of all the associated cameras of the selected POS.

4. Click the OK button to finalize the modification.

3.2.3 Insert POS Setting

1. Click Insert button to open the POS Setting window.

2. Set up basic data source, including Name, Model, IP address, and

Port. There are three types of models.

 SCB-C31 : The device possesses one POS license, and should be equipped with the cash register not working as TCP server.

 SCB-C31A : The difference from SCB-C31 is not possessing one

POS license, so user should activate POS license.

 TCP Client : Cash register possesses with network, so no need to have SCB-C31A as a converter. POS license is needed.

3. After setting, click Test Connection to test POS device connection.

72

4. Set up Miscellaneous options, including Record POS Transaction and

Display on Video Preview.

 Record POS Transaction : Select this checkbox to record POS transaction data. Users are allowed to search the POS data.

 Display on Video Preview : Select this checkbox to display POS transaction overlay on associated camera live video. Two types of transaction data display time:

 Name : Name of the POS data source.

 Always : Keep transaction data on video until receiving next transaction date.

 Last for ___ seconds : Each transaction data only lasts on video for ___ seconds after receiving the last data of transaction.

5. Select Tag Filter. See Tag Filter for details.

6. Select the camera of Associated Cameras to display POS transaction data overlay on live video.

73

7. Set up display area for each camera video in Display Region

Definition.

 Default : The default display area is in the upper left corner of video image.

 User Define : Enable User Define, and define display area by dragging rectangle

8. Click the OK button to save.

3.2.4 Delete POS Device

1. Choose POS device.

2. Click Delete button to remove this POS device from the system.

3.2.5 Configure POS Setting

1. Choose POS device.

2. Click Configure button to open the POS Setting window.

3. Refer to Insert POS Setting to modify configuration.

3.3 Tag Filter

The original transaction data from POS system is hard to read. Users can define filters to make the POS strings meaningful. The system also provides a simple default tag filter to filter out same common EPSON commands, users can base on this default tag filter to edit their customized filters.

3.3.1 Add New Tag Filter

1. Click Insert button or choose a device and click Configure button to open the POS Setting window.

2. Click New to open tag filter window.

 General : Name of Tag Filter and Connect button.

 Original Data : Original transaction data from POS device.

 Filtered Data : Filtered data after definition.

 Filter Function : Tool used for defining filter type.

 Filter List : List of all filters.

 Data Tool : Clear/import/export buttons to clear/import/export the

74

original and filtered data.

 Filter Tool : Upper/down buttons to arrange the priority of each filter; remove button to remove the filter from list.

3. Enter name of this tag filter.

4. Click Connect button to capture POS transaction data from POS device.

The original transaction data will be shown on the left window.

Note

If you don ’t want the data keep importing when editing filter, click Disconnect button to stop connecting.

5. Data Tools



Clear : Remove data from Original Data window and Filtered

Data window.

 Import : Reload exported binary data.

 Export : Capture and export original binary data.

6. Start to edit tag filters. Click and drag to select text from Original Data window, and then use the below six buttons to define filters. The filtered transaction data will be shown on the right window.

75

 Omit : Neglect the selected text which is meaningless or not important.

The text will disappear on the right window.

 Substitute : Use another word(s) to replace the selected text. The system will pop up a substitution panel for replacing word(s) users want. The replaced text will be shown on the right window.

 Add New Line : Define the selected text as the symbol for changing to new line. The result will be shown on the right window.

 Start : Define the selected text as the symbol for transaction beginning.

The filtered data will be separated line as below.

76

 Cash Register Opened : Define the selected text as the symbol for opening cash register. The filtered data will be shown the <Cash Drawer

Open> mark as below.

 End : Define the selected text as the symbol for transaction ending. The filtered data will be separated line as below.

7. Filter Tools



Up : Move a tag filter up; the upper filter will be operated earlier.



Down : Move a tag filter down; the lower filter will be operated later.



Delete : Remove a filter from this tag filter list.

77


3.3.2 Edit Tag Filter

1. Select Tag Filter name from drop-down menu.

2. Click Edit button.

3. Configure the Tag Filter window.


3.3.3 Delete Tag Filter

1. Select Tag Filter name from drop-down menu.

2. Click Delete button to delete it.

3.3.4 Import/Export Tag Filter

1. Click Import/Export button and select Import/Export URL.

2. Click Open/Save to Import/Export Tag Filter.

3. After importing tag filters, users can simply select tag filter from drop-down menu without editing new tag filter.

3.4 POS Display Font

The system allows users to set up the fonts of POS transaction data on live view video and playback video.

3.4.1 Live View


2. Click the Live View.

3. Click the General Setting button to open Live View Setting window.

78

4. Select the font, font size, font color and background for the POS transaction data overlaid the video.


3.4.2 Remote Live Viewer

1. Startup > NUUO NVRmini > Remote Live Viewer

2. Click the General Setting button to open Live View Setting window.

79

3. Select the font, font size, font color and background for the POS transaction data overlaid the video.


3.4.3 Playback


2. Click the Playback button.

3. Click the Setting button to open Setting window.

80

4. Select the font, font size, font color and background for the POS transaction data overlaid the video. Also, select the type of transaction data display time.

3.4.4 Playback System

1. Startup > NUUO NVRmini > Playback System

81

2. Click the Setting button to open Setting window.

3. Select the font, font size, font color and background for the POS transaction data overlaid the video. Also, select the type of transaction data display time.

3.5 POS Transaction Data Search

POS Search tool is used to search key word of all transaction data.

82

3.5.1 Search POS Transaction Data through Playback



3. Click the Open Record button to open Data Time Search Dialog window.

4. Click the POS Search button to open POS Search Dialog window.

5. Select a POS device(s) from the POS list.

6. Set up Start Time and End Time in Data Time Period section.

83

7. Enter the keyword you want to search.

8. Click the Search button, the results will be shown in Transaction table.

9. Select an item from Transaction table, the transaction detail will be shown in the table of lower right corner, and the recorded video of associated camera will be shown in the upper right corner.

10. Select the checkbox of Search within result, and enter a keyword, you can search the data within the results.

3.5.2 Search POS Transaction Data through Playback System

1. Startup > NUUO NVRmini > Playback System.


3. Click the Remote Server Site icon on the top of the window to select the server users want to access.

4. Follow the step 4 through 10 of Search POS Transaction Data by

Playback to search the data.

3.6 Playback Video with POS Data

Enable POS overlay in Setting window to view recorded video with POS

transaction data (Refer to POS Display Font). If the option is enabled, the

system will auto display transaction data when playing recorded video.

There are two modes to select video period.

3.6.1 Select Period by POS Search

1. Refer to POS Transaction Data Search.

2. Select the transaction data from the result list, and click OK.

84

3. The period you select from POS search results will be selected automatically.

4. Click OK to playback videos.

3.6.2 Select Period by Data & Time through Playback




4. Highlight the video clip you want to review by left-clicking and dragging the time period. You may also utilize the Start Time and End Time in

Date Time Period section after choosing cameras.


3.6.3 Select Period by Data & Time through Playback System



3. Click the Remote Server Site icon on the top of the window to select the server users want to access.


Date Time Period section after choosing cameras.


3.7 Backup Video with POS Data

There are three ways to backup video with POS transaction data.

85

3.7.1 Backup through Internet Explorer


2. Click the Open Record button to select data.

3. Click the Backup button.

4. Check the Backup POS Transaction option.

5. Set the Start Time and End Time you want to backup.

6. Select the cameras you want to backup.

7. Select the directory you want to save the backup data.


9. The system will then begin backup process automatically.

3.7.2 Backup through Playback System




86

4. Check the Backup POS Transaction option.





3.7.3 Backup through Backup System

Please refer to step 1 to 14 of the content of Backup and Delete Records,

and check the Backup POS Transaction option.

87

4. I/O

4.1 Introduction

4.1.1 System Introduction

NUUO provides remote I/O solution for NVRmini by connecting SCB-C31 with NUUO I/O Box SCB-C24/26/28. Refer to the below architecture, I/O device is connected directly with I/O Box, and input/output signal delivered in RS485 format are converted to Ethernet through SCB-C31. NVRmini can use the signals to do more sophisticated setup, such as starting recording when input triggered, triggering output as an event happened, and much more.

4.1.2 HW Installation

SCB-C24/26/28 must work with SCB-C31 (Ethernet-RS485 converter).

Further, the C31 Box cannot be used for POS and converter at the

same time, and one C31 Box can be paired with one NAS unit only.

Please follow the steps below to configure the devices.

Step 1: Check the system switch of SCB-C31 is switched to OFF-OFF position.

Step 2: Connect SCB-C31 with power source.

Step 3: Connect SCB-C31 with internet by RJ45 LAN cable.

Step 4: Connect I/O Box with power source.

Step 5: Connect SCB-C31 and I/O Box with cable, positive connection

( TX+/D+ and DATA+ ) and negative connection ( TX-/D- and DATA). Take

SCB-C31 with I/O Box SCB-C24 for example as below.

88

RS485

RJ-45

RS485

Reset Switch Power

Important

Multiple I/O Boxes can be connected to a single SCB-C31.

However, series connection of I/O boxes is forbidden.

Furthermore, the default ID for each I/O Box is the same. Please follow the direction to setup I/O Box one by one.

4.1.3 Software Installation – SCB-C31

Step 1: Open Internet Explorer to setup SCB-C31. The default IP address is 192.168.1.1.

89

Step 2: Setup IP address and port.

1. Static IP Address

2. Server Listening Port: The default port is 4000, which is not the port for setting page, but for signal transmission.

Step 3: Click the Apply button to activate configuration.

Important

Due to the stability of data transmission, one SCB-C31 can be paired with one NAS unit only.

4.1.4 Software Installation – SCB-C24/26/28

The default ID of I/O Box is identical. To avoid the conflict between Boxes, please connect only one Box with SCB-C31 and execute the setup application to change the ID from the default value (1).

1. Execute IOConfig.exe, type in the IP address and port of SCB-C31, and click the Scan button.

90

Note

IOConfig.exe starts scanning the ID from 0 to 255, and it may take around a minute to finish scan.

2. When the I/O Box is discovered, click on the item and change the ID from the New Address field. Click the Update device button to activate the settings.

3. Scan again to make sure the configuration is validated. In this case, we changed the ID to 10, so we can modify the number of “Starting address ” to 10 to save the searching time.

91

4. Refer to the HW Installation

section to connect other I/O Box and repeat the steps 1 through 3 above to configure more I/O Boxes.

4.2 Software Setup

4.2.1 Add I/O Box


2. Click POS & I/O / I/O Settings / I/O Box Settings.

3. Enter the information of I/O box.

 Device No : The unique ID system distributes in sequence automatically.

 Device Name : The name of the I/O box.

 Device Type : The types of I/O box, including SCB-C24, SCB-C26,

92

and SCB-C28.

 IP Address : The IP Address of SCB-C31.

 Port : The transmission port of SCB-C31.

 ID : The ID of the I/O box.

4. Click the Create button, and the information will be updated in I/O Box

List.

5. Repeat steps 3 and 4 to add more I/O boxes in the list.

6. Click the Save button to activate the settings. Meanwhile, system will distribute an unique ID to each device.

4.2.2 Modify I/O Box Information


2. Click POS & I/O / I/O Settings / I/O Box Settings.

3. Click the I/O box which you want to modify from the list.

4. Modify the information of this I/O box, and click the Modify button.

5. Click the Save button to activate the settings.

4.2.3 I/O Pin Setting


2. Click POS & I/O / I/O Settings / I/O Pin Settings.

3. All input and output pins are shown in this page, including the ones from cameras and I/O boxes. Check the box to enable a pin (defaulted), and type a name in the field for each I/O pin.

93

4. For output pin, you can configure its duration time to control how long output acts after it’s triggered. The duration range is 3 sec~60 sec. N/A stands for unlimited.


Note

If the box of I/O pin is unchecked, this pin won ’t be shown on relative application pages. In other words, you cannot do any setting/operation with this pin. See details in next section.

4.3 Relative Configuration and Application

4.3.1 Record on Input Trigger

Refer to Recording Schedule / Event Setup .

4.3.2 Input and Responding Actions

Refer to I/O Box Input and Responding Action Setup .

4.3.3 I/O Control Panel in Live View

Refer to Live View Control Panel .

94

5. Live view

There are two ways to execute the live view function: with Internet Explorer or with the Remote Live Viewer application.

5.1 Internet Explorer

5.1.1 Live View Control Panel

Start Menu Playback

Play / Stop / Drop

Live View Setting

Information

Display Window



PTZ Camera Control : You may control the camera view by using the

PTZ camera control panel to adjust the camera’s view. This is only available with cameras that support the PTZ function.



Set Preset Point / Go to Preset Point : Adjust the camera view and click the button to set up this view as preset point. Repeat the process to add more preset points. Click the button to see the preset view.



Zoom : Click the + or

– button to zoom in or zoom out the view.

Log In/ Log Out

(Live view service)

Camera List

Set Preset Point /

Go to Preset Point

Zoom out / Zoom in

PTZ Camera

Control

Focus Far / Auto

Focus / Focus Near

95

 Play / Stop / Drop : Select a camera / video and click this button to play/stop/disconnect a particular channel.

 Information Display Window : Display video information including server name, video current status, and bit rate for a selected channel.

 Start Menu > E-Map : Upload map and drag camera or I/O on it to track device location and alarm status with instant response when an event occurred. See details

in the chapter of E-Map .

 Start Menu > I/O Control Panel : Utilize I/O device function remotely.

User can remotely adjust the Output Pins by turning it on or off.

Click to turn on/off the

“Output” pins

 Auto Scan : Activate auto scan to rotate the channels on the display screen. For instance, you may select to show only 4-split screen on the liveview, while connecting 16 channels to the system. With auto scan function, you are able to see all 16 channels by turns.

 Layout : Click to change the multiple-split layout.

Auto Scan

Full Screen

Layout: NxN

You can right click on the camera screen to enable the following function.

96

 Enable Move : Adjust the current view of camera which supports PT function by dragging the button on the display screen.

 Enable Digital PTZ : Click the + or – button to zoom in or zoom out the view. The lower right square flashing on the video grid indicates the correspondent view of the camera.

 ImmerVision Lens Setting : Select the mode of lens, original, PTZ mode, Quad mode and Perimeter mode.

 Vivotek Fisheye Setting : Select the mode of lens, Original,

Rectilinear mode, Full-view panorama mode, Dual-view panorama mode. Type of modes depends on lens location.

 Stream Profile : Select the stream profiles, original, low, minimum.

 Enable Audio : Enable audio on active channel(s).

 Snapshot : Select the snapshot function to capture a specific video image immediately.

 Toggle Fullscreen : Select it to view cameras with full screen. Press

“Esc” or right click un-select full screen to go back to the original view.

Also, right click on camera list to duplicate and connect/disconnect designate cameras, and do other functions.

97

 Duplicate Camera : Select the duplicate camera function to create multiple views. The duplicated camera will be shown with green indicator as the right picture. Combine this function with digital PTZ, users are allowed to enlarge different spots and view them in different channels without failing to record the whole view.

 Connect / Disconnect : Click to connect or disconnect the designate camera.

 Login / Logout Server : Click to login or logout.

 Connect All / Disconnect All : Click to connect or disconnect all cameras.

5.1.2 Live View Setting


2. Set the cameras.

3. Click the Live View button on the top of the page.

4. Select a camera(s) from the camera list on the right and then drag it to where you wish the image to be displayed.

Important

When running Internet Explorer, do not use the function “Open in

New Window”. Using this function may cause Internet Explorer to become unstable.

98

5.1.3 General Setting



3. Click the General Setting button.

4. Click the General tab.

5. Check the Enable audio on active channel option to enable audio streaming on active channel. This function synchronizes with right click on camera to enable audio.

6. Check Synchronize video frames to avoid the tearing problem occurring in video display while increasing the CPU loading.


5.1.4 Stream Profile Setting

Select the preferred stream type of each camera as default live view profile.




4. Click the Camera tab.

99

5. Adjust the stream profile of every camera with stream profile enabled in

the setting page .

6. Click a camera and select its stream profile, and click the Copy to … button to apply this profile to other channels.


5.1.5 OSD (On-screen display) Setting




4. Click the OSD tab.

100

5. Check the Enable camera OSD option.

6. Set the foreground and background settings of the OSD.

7. Select which kinds of information will be displayed on the screen.

8. Click the Apply button to preview the result.

9. Click the Default button to back to the default settings if necessary.


5.1.6 Monitor Display Setting




4. Click the Monitor Display tab.

Layout

Auto Scan

5. Select Primary channel which will always be on the screen when activating auto scan; while select Secondary channel which has second priority when activating auto scan. Enter the time interval for auto scan.

6. Select the screen division of NxN type.


101

5.1.7 Notification




4. Click the Notification tab.

5. Check Show recording status to show the crystal ball with recording status on monitor display.

6. Check Show camera event to display the words of detected camera event on the correspondent screen.

7. Check Popup system event to pop up system event message dialog as a warning when a system event occurred.

8. Check Popup E-map on event to pop up E-map with event indicator when camera or I/O Box event occurred.


Note

“Popup E-map on event” only activates on event, which means that you should not only edit camera and I/O on E-map but setup camera motion, camera input and I/O Box input as an event.

Refer to Event & Action Management to do the settings.

102

5.1.8 Set up Joystick Control




4. Click the Joystick tab.

 Function : You can choose the function from the drop-down menu for the button of the joystick.

103

 Parameter : Choose the preset point from the drop-down menu.

 Default : Click to back to default setting.

 Import : Click to import the settings.

 Export : Click to export the settings.


5.1.9 Set up Live View Sound on Event




4. Click the Sound tab.

5. Check the Enable playing sound on event option.

6. Select sound file, default sound or user defined sound (.wav).


Note

The function only activates on event, which means you have to setup camera motion, camera I/O and I/O Box I/O as an event.

Refer to Event & Action Management to do the setting.

104

5.2 Remote Live Viewer Application

5.2.1 Remote Live Viewer Application Control Panel

Exit

Minimize

Play / Stop / Drop Information

Display Window

Start Monitor Playback Live View Setting

 PTZ Camera Control : You may control the camera view by using the

PTZ camera control panel to adjust the camera’s view. This is only available with cameras that support the PTZ function.

 Set Preset Point / Go to Preset Point : Adjust the camera view and

Log In/ Log Out

(Server / Group)

Server and Camera

List

Set Preset Point /

Go to Preset Point

Zoom out / Zoom in

PTZ Camera

Control

Focus Far / Auto

Focus / Focus Near click the button to set up this view as preset point. Repeat the process to add more preset points. Click the button to see the preset view.

 Zoom : Click the + or – button to zoom in or zoom out the view.

 Minimize : Minimize the Remote Live Viewer window.

 Exit : Shut down the application.

 Play / Stop / Drop : Select a camera/ video and click this button to play/stop/disconnect a particular channel.

105

 Information Display Window : Display video information including server name, video current status, and bit rate for a selected channel.

 Start Monitor > E-Map : Upload map and drag camera or I/O on it to track device location and alarm status with instant response when an event occurred. See detai

ls in the chapter of E-Map.

 Start Monitor > Remote I/O : Select Open Monitor to append monitor to view more live videos on multiple monitors. Utilize I/O device function remotely. - User can remotely adjust the Output Pins by turning it on or off.

 Playback : View playback video remotely.

Click to turn on/off the “Output” pins


 Enable Move : Adjust the current view of camera which supports PT function by dragging the button on the display screen.

106

 Enable Digital PTZ : Click the + or – button to zoom in or zoom out the view. The lower right square flashing on the video grid indicates the correspondent view of the camera.




 Stream Profile : Select the stream profiles, original, low, minimum.

 Enable Audio : Enable audio on active channel(s).

 Snapshot : Select the snapshot function to capture a specific video image immediately.



Also, right click on camera list to duplicate and connect/disconnect designate cameras, and do other functions.

 Duplicate Camera : Select the duplicate camera function to create multiple views. The duplicated camera will be shown with green indicator as the right picture. Combine this function with digital PTZ, users are allowed to enlarge different spots and view them in different channels without failing to record the whole view.

 Connect / Disconnect : Click to connect or disconnect the designate camera.

 Login / Logout Server : Click to login or logout.

 Connect All / Disconnect All : Click to connect or disconnect all cameras.

107

5.2.2 Unit Connection Setting

1. Startup > NUUO NVRmini > Remote Live Viewer.

2. Click the General Setting button.

3. Click the Server tab.

4. Insert the unit name.

108

5. Insert the IP address.

6. Modify the port if necessary.

7. Insert the user name.

8. Insert the password.

9. Check the Save Password / Auto login option.

10. Click the Test Server button to test the connection between the local application and the remote unit.

11. Click the Add button to add this unit into your remote server list.


5.2.3 General Setting



3. Click the General tab.

109

4. Check the Enable audio on active channel option to enable audio streaming on active channel. This function synchronizes with right click on camera to enable audio.

5. Check Synchronize video frames to avoid the tearing problem occurring in video display while increasing the CPU loading.

6. Select monitor(s) to run LiveView.


5.2.4 Camera Group Setting

You can put different cameras into the same group.



3. Click the Group tab.

110

4. Log in to all the servers that contain the camera(s) you would like to put into the group(s).

5. Click the Insert button to create a new group.

6. Name this group.

7. Highlight the camera(s) that you would like to add into this group and then click the <-- button.

8. Repeat step 6 to establish the group.

9. Repeat steps 3 through 7 to establish other groups.


5.2.5 Delete/ Rename Camera Groups



3. Click the Group tab.

4. Click the group which you want to modify.

5. Click the Delete or Rename button to remove or rename that group.

6. Repeat steps 3 and 4 to modify other groups.


5.2.6 Stream Profile Setting

Select the preferred stream type of each camera as default live view profile.

111



3. Click the Camera tab.

4. Adjust the stream profile of every camera with stream profile enabled in

the setting page .

5. Click a camera and select its stream profile, and click the Copy to … button to apply this profile to other channels.


5.2.7 OSD (On-screen display) Setting



3. Click the OSD tab.

112

4. Check the Enable camera OSD option.

5. Set the foreground and background settings of the OSD.

6. Select which kinds of information will be displayed on the screen.

7. Click the Apply button to preview the result.

8. Click the Default button to back to the default settings if necessary.


5.2.8 Monitor Display Setting



3. Click the Monitor Display tab.

Layout

Auto Scan

113

4. Select appointed server group to activate auto scan.

5. Select Primary channel which will always be on the screen when activating auto scan; while select Secondary channel which has second priority when activating auto scan. Enter the time interval for auto scan.

6. Select the screen division of NxN type.


5.2.9 Notification



3. Click the Notification tab.

4. Check Show recording status to show the crystal ball with recording status on monitor display.

5. Check Show camera event to display the words of detected camera event on the correspondent screen.

6. Check Popup system event to pop up system event message dialog as a warning when a system event occurred.

7. Check Popup E-map on event to pop up E-map with event indicator when camera or I/O Box event occurred


114

Note

“Popup E-map on event” only activates on event, which means that you should not only edit camera and I/O on E-map but setup camera motion, camera input and I/O Box input as an event.

Refer to Event & Action Management to do the settings.

5.2.10 Set up Joystick Control



3. Click the Joystick tab.

 Function : You can choose the function from the drop-down menu for the button of the joystick.

115

 Parameter : Choose the preset point from the drop-down menu.

 Default : Click to back to default setting.

 Import : Click to import the settings.

 Export : Click to export the settings.


5.2.11 Set up Live View Sound on Event



3. Click the Sound tab.

116

4. Check the Enable playing sound on event option.

5. Select sound file, default sound or user defined sound (.wav).


Note

The function only activates on event, which means you have to setup camera motion, camera I/O and I/O Box I/O as an event.

Refer to Event & Action Management to do the setting.

5.2.12 Set up Remote Live Viewer


2. Click the unit you wish to access in your remote server list.

3. Click the LOG IN button to access your unit.

4. Select a camera(s) from the camera list on the right and then drag it to where you wish the image to be displayed.

117

6. E-Map

There are two ways to execute the live view function: by Internet Explorer or by

Remote Live Viewer application.

With E-map, user can easily track the device location and alarm status with instant response when an event occurs. The arrows and lightening icon on

E-map represent cameras and I/O devices. These icons will turn red as being triggered by alarms.

There are two modes in E-map application, Edit Mode and Browse Mode.

 Edit Mode : The function buttons on the bottom of this E-map dialog will be active. Users can add/edit/delete maps and indicators of devices.

 Browse Mode : Users are not allowed to do any configuration but check the map hierarchies and device list to see indicators and related information.




3. Click the Start Menu button and select Open E-Map.

6.1.1 E-Map Control Panel

Device and Map Tree List E-Map Picture

Edit Mode /

Browse Mode

Switch Button

Preview Window and Information

118





Map : Select a map you want to show on E-map Window.

Camera : Select the camera to see preview video or mark indicator on E-map.

 Digital Input : Select it to highlight the device with green ring on map and show status on Information Window. If the Digital Input is from IP camera, the preview window will display live video of the camera.



Digital Output : Select it to highlight the device with green ring on map and show status on Information Window. If the Digital Output is from IP camera, the preview window will display live video of the camera.

 Map Indicator : Clicking the indicator will lead to the next map layer. If you want to move to the upper layer, select it by mouse directly or click icon on the map.

 Camera Indicator : The indicator of cameras dragged from Device and Map Tree List to show preview video and related information.

When event occurs, the color of indicator will turn red.



Digital I/O Indicator : The indicator of I/O devices dragged from

Device and Map Tree List to show related information. When event occurs, the color of indicator will turn red.

 Information Window : The window shows the related information of each indicator.

 Map : Show map name.

 Camera : Show camera name and connecting status.

 Digital Input : Show Digital Input name and status (0 or 1).

 Digital Output : Show Digital Output name and status (0 or 1).

6.1.2 Add Map

1. Make sure being in “Edit Mode” and all devices are inserted and connected.

2. Right click on the Map icon in Device and Map Tree List to obtain the option menu to add map, or just click the Add Map button to configure.

119

3. Select a map file and insert a name. Click the OK button, and then the map you added appears in the Device and Map Tree List.

4. The map indicator appears on the upper left of map. Drag it to the position you want on appointed map.

5. Repeat steps 2 through 4 to add more maps.

6. Click the Upload button to activate all the settings.

Note

The maximum file size of each map is 500KB. There are 10 layers of map, and the map capacity of each layer is 10.

6.1.3 Edit Map


2. Right click on the Map icon in Device and Map Tree List to obtain the option menu to edit map, or just click the Edit Map button to configure.

3. Repeat step 2 to edit more maps.


6.1.4 Delete Map


2. Right click on the Map icon in Device and Map Tree List to obtain the option menu to delete map, or just click the Delete button.

3. Repeat step 2 to delete more map.


120

6.1.5 Add/Rotate Device Indicator


2. Select the map which you want to add device indicator on.

3. Select a device from list and directly drag it to the desired location on the map.

4. Select a camera indicator and right click on the indicator or click the

Rotate button to adjust the direction of camera indicator if needed.

5. Repeat steps 2 and 4 to add more indicators on.


6.1.6 Delete Device Indicator


2. Select the indicator and right click on the indicator or click the Delete button.

3. Repeat step 2 to delete more indicators.


6.1.7 Layout Adjustment

Adjust the Layout

 Adjust the Layout : Click the triangular indicator to hide the

Device and Map Tree List / Preview and Information Window on right and left side of the window. Click the indicator again to back to the default.

121

 Maximize the Map : Click the icon on the upper right to get the full screen display of E-map.

6.1.8 Relative Configuration and Application

When an event occurs, related E-map pops up to indicate the location of

this event. Please check the Notification function for details.

6.2 Remote Live Viewer Application


2. Click the Start Monitor button and select Open E-Map.

6.2.1 E-Map Control Panel

Server List

Edit Mode /

Browse Mode

Switch Button

Device and Map Tree List E-Map Picture Preview Window and Information

 Server List : Select a server to display the E-map of the server.

Note

The E-Map function of Remote Live Viewer is quite similar with the one in Internet Explorer, so you can refer to the section of

Internet Explorer for the details.

122

7. Playback

There are two ways to execute the playback function: with Internet Explorer or with the Playback System application.


7.1.1 Playback Control Panel

Browse Mode

Search Mode

Screen Division

Open Record

Enhancement /

Post Processing

Tool

Save Image

General Setting

Backup

Export Video /

Audio

Previous/Next Interval

Play / Pause / Stop

Information

Display Window

Audio Volume

Control

Step Backward/Forward Frame(s)

Cue Speed Zoom



Information Display Window : Displays video date and time, cue-in / cue-out point times, and speed.



Audio Volume Control : Adjust the sound level.



Screen Division : Allocate the sub-screen display by clicking on the desired layout icon. To switch to single camera display, double click a particular sub-screen. Double click the screen again to regain previous screen division layout.

Print

123

 Browse Mode : Play the recorded video when in Search Mode.

 Open Record : Click the Open Record button to access the

Date-Time Panel and select the video records which you want to review.

 General Setting

 Record Display

 Calendar View: view the Record Display Window as a calendar.

 List Control: view the Record Display Window as a list control.

 Play

 Play when open: check this option to set the system to start playing the video clip every time a record is withdrawn.

 Auto-skip when recording in motion-only mode: check this option to set up the system to automatically skip to the points where there were motions recorded.

 Next interval: set the interval with which the video goes forward when you click the Next button on the control panel.

 Previous interval: set the interval with which the video goes backward when you click the Previous button on the control panel.

 Capture Image

 Save in clipboard: the image will be saved in the clipboard and can be pasted to other application software.

 Manually save the image file: you can manually select where you want to save the image, name the saved file, and choose the format you want to save the image.

 Automatically save the image file: by presetting a path/URL and the image format, the system will automatically save the image accordingly when you click the Save Image button on the control panel.



124

Refresh

POS Search

Previous/ Next

Recording Date


 Enable ImmerVision PTZ : Adjust PTZ in PTZ mode.


 Enable Vivotek Fisheye PTZ : Adjust PTZ in PTZ mode.



7.1.2 Search the Recorded Video

Video Preview

Record Display

Window

Recording Types

 : refresh the Record Display Window.



or : go to previous or next recording date.

 Record Display Window : Display the available recorded video records.

 Date Time Period : Select the start and end time points that indicate the time period you would like to view after choosing cameras.

 Video Preview : Check the Enable Preview option to view the selected video.



Time Table (preset recording schedule): Click the icon to select all channels; click the icon to deselect all channels. Finally, use

Date Time

Period

Time Table

125

the scale bar to modify the scale of the time table.

There are two recording modes: Record Always and Record on

Event. The Time Table will display these two modes in different colors.

 Show Records : Show the period of recording data in the Time Table.

 Show Event Log : Show Event Log makes Time Table show the time of event detection. Color of event type can be defined by preference.

1. From the Record Display Window at the top left of the Date Time Panel, select the date you want to search the record from. The red lines shown on the time table indicate available recorded video records.

2. Use color bars to differentiate recording types from each other. This will help you select video clips.


Date Time Period Section after choosing camera. In addition, modify the scale of the time table with the or icon on the bottom left.

4. Check the Enable Preview option to get the preview of the video you select.

5. Click the camera name to increase or decrease cameras you want to playback.


Note

The Record Display Window can be shown in (a) calendar view or (b) list control view. To modify the settings of the record display window, click the General Setting button at the right of the page.

126

7.1.3 Play the Recorded Video

1. Be sure that you have set the schedule / recording event first.


3. Click the Playback button on the top of the page.

4. Click the Open Record button.

5. The Record Display Window will show the information of the available video clips. Select the date you want to search the record from.

6. Highlight the video records that you want to review.


7.1.4 Intelligent Search

After opening the recorded video, click the Search Mode button to obtain the Intelligent Search Tool panel. You can search for unusual events during the recording period.

There are 5 types of unusual events: General Motion, Foreign Object,

Missing Object, Focus Lost, and Camera Occlusion.

 General Motion : Detect all movements in the defined area.

1. Define detection zone by dragging to draw a detection zone. You may define more than one zone by repeating this step.

2. Modify the sensitivity setting by changing the slider control. Moving toward the right will increase the sensitivity level, which means a relatively small movement will trigger the alarm.

3. Set the interval. Moving toward right will increase time interval so that the alarm will only be triggered when the movement lasts longer.

4. Check the Stop when found option. If unchecked, the search tool will list all the events it found, instead of stopping at the moment the event found.


 Foreign Object : Alarm is set on when any additional object appears

127

in the defined area on the screen.

1. Define detection zone by dragging to draw a detection zone.

2. Modify the sensitivity setting.

3. Set the Interval.



 Missing Object : Alarm is set on when the selected object is removed from the defined area on the screen.

1. Define detection object by dragging to draw a detection zone.

2. Modify the sensitivity setting.

3. Set the Interval.



 Focus Lost : System will inform you when the camera(s) lose its focus.

 Camera Occlusion : Alarms when the camera is blocked.

7.1.5 Recorded Video Enhancement





5. Highlight the video clip you want to review, and then click the OK button.

6. Click the Enhancement button.

7. Check the General Setting.

128

 Apply active channel : The settings will only be applied to the selected channel.

 Apply all channels: The settings will be applied to those currently shown on the screen.

8. Set the Filter Setting.

 Visibility : Check the option and adjust the gamma value of the image to enhance the image and make it cleaner.

 Sharpen : Check the option to activate the function. Move the slider control to the right to sharpen the image, to the left to soften it.

 Brightness : Check the option to activate the function. Move the slider control to the right to make the image brighter.

 Contrast : Check the option to activate the function. Move the slider control to the right to increase contrast.

 Grey Scale : Check the option to show the record in gray-scale mode so the image displays in black and white.


 Stop : Stop the enhancement function and close the enhancement tool. (The system will automatically back to the default settings.)

 Default : Back to the default settings, however, the enhancement tool still works.

 OK : Apply the modifications of the settings.

7.1.6 Save a Video






6. Choose the camera display that you want to save as a video clip.

7. Set up the cue in and cue out points; the cue in and cue out time will be shown on the information window.

129

Cue In Cue Out

8. Click the Save Video button.

9. Choose the folder where you want to save the file.

10. Insert the file name and click the Save button.

11. Choose the export format.

12. Choose the use profile.

13. Check to export the recorded video with Audio, OSD and POS

Transaction.


Note

We recommend that you export to the .asf format when saving video. In exporting to the .avi format, the frame rate will be

130

increased when playing in the video player, causing the video to run faster than normal.

7.1.7 Save an Image






6. Choose the camera display that you want to save pictures.

7. Click the Save Image button when the image you want is shown on the screen.

8. Choose the folder where you want to save the file at.

9. Choose the folder and the image format (BMP or JPEG) you prefer.



Note

You may skip step 3 by presetting the folder where you want to save the images and the format you want to save them in.

7.1.8 Print an Image

Print the current image of the video you choose.





5. Highlight the video clip you want to review, and then click the OK

131

button.

6. Choose the camera display from which you want to print pictures.

7. Click the Print button when the image you want is shown on the screen.

8. Set print settings.

 Print Content : Print the image from currently selected channel or all the channels shown on the screen.

 Page Setting

 Print in original size : Check to have the image print in original size.

 Fit the page : Check to have the image fit the page.

 Align Image : Top, center, or bottom

9. Click the Print button.

7.1.9 Backup the Recorded Video

Different from Save Video, the Backup function will save all the recorded videos which belong to the time slot you set, instead of the clips.




132





8. The system will then begin backup process automatically.

133

7.2 Remote Playback System Application

Minimize Exit

7.2.1 Playback System Application Control Panel

The Playback System control panel is similar to the playback panel in

Internet Explorer. Check Playback Control Panel for more details about

those buttons.

Information

Display Window

Previous/Next Interval

Browse Mode

Search Mode

Screen Division

Open Record

Enhancement /

Post Processing

Tool

Save Image

Audio Volume

Control

Step Backward/Forward Frame(s)

General Setting

Backup

Export Video /

Audio

Print

Play / Pause / Stop

Cue Speed Zoom

7.2.2 Set up Unit Connections

Before using the Playback System application, you need to set a connection to your unit first.



134

3. Click the Server tab.

4. Insert the name of your unit.

5. Insert the IP address of that unit.




9. Check the Save Password option.


11. Click the Add button to add this unit into the remote server list.


135

7.2.3 Search the Recorded Video

Remote Playback

Site Management



3. Click the icon on the top of the Date-Time Panel to obtain the

Remote Playback Site Management dialog, and then select the server you want to access.

4. Highlight the records you want to view in the Time Table.

5. Set the Date Time Period.

The search process in the Playback System application is similar to that of

Internet Explorer. Check Search the Recorded Video for more details

about the setting process.

7.2.4 Play the Recorded Video

1. Be sure that you have set up the recording schedule / response first.


3. Click the General Setting button and the Server tab to set connections

to your unit. See Set up Unit Connections for more details.


5. The Record Display Window will show the information of the available

136

video clips. Select the date you want to search the record from. Check

Search the Recorded Video for more details.


7. Select the start and end points in Date Time Period to adjust the time slot.


7.2.5 Intelligent Search



3. The Record Display Window will show the information of the available video clips. Select the date you want to search the record from. Check



5. Choose the camera display for which you want to implement smart search.

6. Click the Search Mode button to open the Intelligent Search Tool panel.

7. Set up unusual events here to detect abnormalities occurring during

the recoding period. Check Intelligent Search for more details.

8. The searched events will be listed. Click to find that event.

There are 5 types of unusual events: General Motion, Foreign Object,

Missing Object, Focus Lost, and Camera Occlusion.

 General Motion : Detect all movements in the defined area.

 Foreign Object : Alarm when any additional object appears in the defined area on the screen.

 Missing Object : Alarm when the selected object is removed from the defined area on the screen.

 Focus Lost : System will inform you when the camera(s) lose focus.

 Camera Occlusion : Alarm when the camera is blocked.

The intelligent search in the Playback System application is similar to that of Internet Explorer.

137

7.2.6 Recorded Video Enhancement




Search the Recorded Video for more details

.


5. Choose the camera display that you want to implement video enhancement.

6. Click the Enhancement button.

7. Check the General Setting.

 Apply active channel : The settings will only be applied to the selected channel.

 Apply all channels: The settings will be applied to those currently shown on the screen.

8. Set the Filter Setting.

 Visibility: Check the option and adjust the gamma value of the image to enhance the image and make it cleaner.

 Sharpen: Check the option to activate the function. Move the slider control to the right to sharpen the image, to the left to soften it.

 Brightness: Check the option to activate the function. Move the slider control to the right to make the image brighter.

 Contrast: Check the option to activate the function. Move the slider control to the right to increase contrast.

 Grey Scale: Check the option to show the record in gray-scale mode so the image displays in black and white.


 Stop : Stop the enhancement function and close the enhancement tool. (The system will automatically revert back to the default settings.)

 Default : Back to the default settings, however, the enhancement tool still works.

138

Cue In Cue Out

 OK : Apply the modifications of the settings.

7.2.7 Save a Video



3. The Record Display Window will show the information of the available video clips. Select the date from which you want to search the record.

Check Search the Recorded Video for more details.


5. Choose the camera display that you want to save as a video clip.

6. Set up the cue in and cue out points; the cue in and cue out time will show on the information window.

Cue In Cue Out

7. Click the Save Video button.

8. Choose the folder where you want to save the file.

9. Insert the file name and click the Save button.

10. Choose the export format.

11. Choose the use profile.

12. Check the Export Audio option.


7.2.8 Save an Image



3. The Record Display Window will show the information of the available video clips. Select the date from which you want to search the record.

Check Search the Recorded Video for more details.


5. Choose the camera display from which you want to save pictures.

6. Click the Save Image button when the image you want is shown on the screen.

139

7. Choose the folder where you want to save the file at.

8. Choose the format of image (BMP or JPEG) you prefer.



Note

You may skip step 7 by presetting a folder where you want to save the images and a format which you want to save the images in.

7.2.9 Print an Image

Print the current image of the video you choose.






5. Choose the camera display that you want to print pictures.

6. Click the Print button.

7. Set the print settings.

 Print Content : Print the image from currently selected channel or all the channels shown on the screen.

 Page Setting

 Print in original size : Select to have the image print in original size.

 Fit the page : Select to have the image fit the page.

 Align Image : Top, center, or bottom

7.2.10 Backup the Recorded Video

Different from Save Video, the Backup function will save all the recorded videos which belong to the time slot you set, instead of the clips.

140








141

8. Backup and Delete Records

8.1 The Backup System Application

In addition to the ways mentioned in the previous chapters, you can apply the application to backup your files.

1. Startup > NUUO NVRmini > Backup System.

2. Click the Remote Server Site button to set up remote server.

142










12. Click the ▼ button next to Remote Server Site button, and select one of servers you added.

13. Click the New Period button to select the record date.

143

14. Set the Start Time and End Time you want to backup. (or highlight the video records which you want to backup)



17. Select the time slot which you want to backup.


19. Select the way and directory you want to save the backup data.

20. Check the Include Playback application option, which will add

Playback application into the backup folder.

144


8.2 Backup the Recorded Video through Windows

Explorer

1.

Find your unit through Windows Explorer (insert “\\” plus the IP address of your unit)

2. Insert the name and password of the administrator or power user.

3.

Open the “videodata” folder.

4. Copy the date folder which you want to backup to your desktop / laptop.

8.3 Backup the Recorded Video through FTP

1. Find your unit through Windows Explorer (insert “ftp://” plus the IP address of your unit)

2. Insert the name and password of the administrator or power user.

3. Open the “videodata” folder.

4. Copy the date folder which you want to backup to you desktop / laptop.

145

8.4 Playback the Backup Records

8.4.1 With Playback Application

1. Use the Backup System application to backup your records.

2. Check the Include Playback application option, which will add the

Playback application into the backup folder.

3. Open that folder.

4. Double-click the Playback application icon.

5. Select the recorded data to play back.

8.4.2 Without Playback Application

1. Use the Playback function to backup your records.

2. Put your backup folder into the program folder of NVRmini. (Default directory is “C:\Program Files\NUUO\NVRmini”.)



5. Select the recorded data to play back.

8.5 Delete the Recorded Video

8.5.1 With Backup Application

1. Startup > NUUO NVRmini > Backup System.

146

2. Click the Remote Server Site button to set up remote server.










12. Click the ▼ button next to Remote Server Site button, and select one of servers you added.

147

13. Click the New Period button to select the record date.

14. Set the Start Time and End Time. (or highlight the video records which you want to delete)

15. Select the cameras you want to delete the records.


17. Select the time slot which you want to delete.

148

18. Click the Delete button.

19. Confirm the check dialog.

8.5.2 Without Backup Application

1. Find your unit through W indows Explorer (insert “\\” plus the IP address of your unit).


3. Open the “videodata” folder.

4. Select the date folder which you want to delete.

5. Delete the folder.

Caution

In order to keep the system stable, do not delete recorded data from the day in which you do the delete process.

149

9. Verification Tool

The Verification Tool verifies whether the data created by the system has been tampered with. It ’s the process by which a digital watermark (a digital signature) is added to each recorded video frame to ensure its authenticity.

There are three types of data could be verified by Verification Tool:

1. File in (.dat) (.264) format will be displayed as .

2. File in (.avi) (.asf) format will be displayed as .

3. File in (.bmp) (.jpg) format will be displayed as .

9.1 Execute Verification Tool

1. Startup > NUUO NVRmini > Verification Tool.

2. Verification Tool Overview

Add File Add Folder Remove File Select All

Play

Video Preview

Pause



Add File : Insert the single file to list for verification.



Add Folder : Choose the folder with multiple files to list for verification.



Remove File : Remove indicated file(s) from list.



Select All : Select all files in list for verification.

Stop

150

Note

Choose the file type first before selecting files. Only (.dat) (.264)

(.avi) (.asf) (.bmp) (.jpg) are available to open.

 Video Preview : Preview designate file in verification list. Select the buttons below to play , pause , and stop the video file.

9.2 Verify Image / Video

1. Select single or multiple files for verification.

2. Click the Verify button to start verification.

3. The verification result will show on watermark column. If a file was tampered with, it will show ; if a file passed verification, it will show .

Wat

Search

Mode

Screen

Division ermark

Verification report

4. The verification report will indicate the information related to the verification.

151

10. External Storage

Total recording space can be expanded up to 16TB by connecting DAS through eSATA port, which is a new feature for S series devices.

Important

For performance consideration, please lower the total bitrate to

40Mbps.

10.1 Create a Volume on DAS

The current compatible DAS is Promise DS4600. We don ’t guarantee the quality of other DAS models. Please refer to the manual of Promise

DS4600 to create a single volume on DAS.

Note

We are unable to create a volume on external storage in NAS setting page, so do NOT skip this step before connecting to NAS device.

Important

External storage ONLY works when there is a volume in NAS, no matter the volume status is functional or critical. However, if the status of the only NAS volume becomes offline after using a while, the information of external storage will disappear from setting page temporarily while it ’s still functional.

10.2 Create an External Storage on NAS



3. Click the RAID Status tab, and you will find External SATA Disk display in Disk List.

152

4. Click RAID & File System / File System Management.

5. Click the ESATA icon to view the disk drive information.

6. Click the Format ESATA Disk button.

7. A confirmation dialog pops up. T ype “YES” into the field, and then click the OK button. System is starting formatting.

8. Volume is ready for recording after formatting.

Note

The recording sequence of volumes is NAS – DAS – other volume created in NAS after DAS disk mounted.

153

11. Log out

Click the Logout button on the top of the page to log out of the system. If there is no action in 10 minutes, the system will log out automatically to avoid unauthorized access.

154

12. Remote PC System Requirements

Remote PC Minimum Requirements

Model

OS Supported

CPU

2 bay 4 bay

Windows XP/ 2003/ Vista/ Win7

Intel Core 2 Duo, 2.6GHz

RAM 1GB

User Interface 1. HTTP Web browser - Internet Explorer 7 or later

2. Client Application Program

3. Mobile Client

155

13. Troubleshooting

13.1 Check the System Status LED

The system status LED reports the condition of the enclosure fan and power supply:



Green : Normal



Amber : There is a problem with the fan or power supply



Red : The fan, power supply, or file system has failed

If your unit is configured to work with a UPS, it will continue to run for a while after a power supply failure.

13.2 Check Disk Status LEDs

The disk status LEDs report the condition of the disk drives:

 Green : Normal

 Amber : Rebuilding this disk drive

 Red : Failed disk drive

 Dark : No disk drive is installed

13.3 Replace a Failed Disk Drive

If a disk drive fails, the Disk Status LED becomes red. If the disk drive belongs to a RAID Volume, the Volume goes Critical or Offline. See 10.4

Check RAID Volume Status for details.

Replace the failed disk drive with a new disk drive of the same or slightly greater capacity. You do not have to power down the unit.

1.

Open the unit’s front lid.

2. Pull out the drive carrier with the failed drive.

3. Remove the failed disk drive from the drive carrier.

4. Install a new disk drive into the carrier.

5. Place the carrier with the new disk drive back into the open slot in the

156

unit.

If the failed drive belonged to a RAID Volume, the RAID Volume will begin rebuilding as soon as the new drive is installed. During the rebuild, the Disk

Status LED shows amber. When the rebuild is finished, the Disk Status

LED turns green.

If the replacement drive is free, i.e., not assigned to a RAID Volume or as a spare, the Disk Status LED remains dark after you install the new drive.

13.4 Check RAID Volume Status

1. Click RAID & File / RAID Management.

2. Click the RAID Status tab.

13.5 Respond to a Critical RAID Volume

How the unit responds to a Critical RAID Volume depends on the RAID level of your Volume and whether you have a spare drive available:

 For a RAID 1 Volume or a three-drive RAID 5 Volume, if a spare drive is available, the RAID Volume begins rebuilding itself automatically.

 For RAID 1, 5, and 10 Volumes, when no spare drive is available, you must replace the failed disk drive. The RAID Volume will begin rebuilding itself when you install the new disk drive. See 10.3

Replace a Failed Disk Drive for details.

 RAID 0 Volumes go offline after a disk drive failure. A RAID 0 Volume cannot be rebuilt. All data on the Volume is lost.

13.6 Respond to an Invalid RAID Volume

The system considers a RAID Volume invalid when the RAID Volume was created by a different unit. However, the RAID Volume itself remains functional and the data on it is safe. It normally happens when a broken unit needs to be replaced, so as the recording work.

When the system does not recognize the RAID Volume, the unit displays

157

the RAID Volume as invalid.

Use the Recover function to validate the RAID Volume. The Recover tab is only active when an invalid RAID Volume is present and can be recovered.


2. Click RAID & File / RAID Management

3. Click the Recover tab.

4. On the Recover tab, click the option button beside the invalid RAID

Volume.


6. The unit will reboot to update its configuration and recognize the RAID

Volume.

Important

Running the Recover function might erase some or all of your settings. Besides backing up the recorded data before recovering, if that condition do happen, run the Install Wizard to set them again.

13.7 Check File System Status

Typically the first indication of a problem with the unit’s file system is when your drive becomes unavailable.


2. Click RAID & File / File System Management.

3.

Click the File System Status tab.

4. Look for the RAID Volume icon: . If the RAID Volume icon is Critical

(has a yellow “!”), the file system contains errors and you must rebuild the file system.

13.8 Rebuild the File System


2. Click RAID & File / File System Management.

3. Click the File System Status tab.

158

4. Click the RAID Volume Critical icon to display the Rebuild File

System button.

5. Click the Rebuild File System button.

6. In the confirmation box, type “YES” into the field provided, and then click the OK button.

13.9 Check Enclosure Status



3. Click the Enclosure Information tab.

4. If CPU temperature is above specification:

 Be sure there is adequate air flow around the device.

 Be sure the ambient temperature is below 35°C (95°F).

5. Check the fan speed.

 If the fan speed is below 1800 RPM as Smart Fan function disabled, contact Technical Support.

 If any power status is out-of-specification, contact Technical Support.

13.10 Restore the Default Administrator’s Password

If you forget the password, and want to reset the Administrator’s password to the default password: admin, follow the following steps.

1. Verify that the system is fully booted.

2. Insert your reset tool into the reset button hole on the back of the device.

3. Press and hold the reset button for 8 seconds, until the System Status

LED flashes in green.

4. The Administrator’s password is now reset to admin.

159

Caution

Pressing and holding the reset button for 8 seconds will restore the default Administrator password.

13.11 Restore All Default Configuration

If you want to restore all configurations to default setting, follow the following steps.

1. Verify that the system is fully booted.

2. Insert your reset tool into the reset button hole on the back of the device.

3. Press and hold the reset button for 14 seconds, until the System

Status LED keep the red light and then turn off.

Caution

All the configurations including disk volume configure will be reset. To prevent from disks being unavailable, remember backing up the recorded data before resetting.

13.12 Install ActiveX

If you cannot see the complete page of the system when using Internet

Explorer, it may be because the ActiveX installation process is not completed.


2. Click the Live view / Playback button on the top right.

3. The browser will ask whether to install ActiveX.

160

4. Click the upper bar to begin the installation process.

5. Click the Install button to complete the process.

13.13 Upgrade Process When Using Windows Vista

Windows Vista limits user authority, which will cause it to block any connection through Windows Explorer. In this case, you need to change

Vis ta’s settings to allow the connection.

1. Startup >Control Panel.

2. Select Administrative Tools.

3. Select Local Security Policy / Security Options.

4.

Select “Network security: LAN Manager authentication level”.

5. From the dropdown menu, choose “Send LM & HTLM – use NTLMv2 session security if negotiated”.

161



8. Put the update file into the folder “public” in your unit.


10. Click System / System Upgrade.

11. Click the Firmware Upgrade tab.



14. Select upgrade file or insert the entire file name, including the

162

extension name.


16. The system will begin the upgrade process.

17. After upgrade, the system will reboot. You need to re-access the unit again.

13.14 Cannot Playback When Applying Windows 2000

1. Check whether you have installed Media Player or not.

2. If you have installed Media Player, check whether its version is version

9 or later.

13.15 Cannot Log in to the Unit with Internet Explorer

1. Check the settings of your antivirus software.

2. Change to appropriate settings or turn off this antivirus software.

13.16 UAC on Windows Vista

Vista has a feature called UAC (user access control) to improve the security of Microsoft Windows by limiting application software to standard user privileges until an administrator authorizes an increase in privilege level. Therefore, you will get error message when running the system while

Vista UAC turned on. There are two ways to solve this problem.

13.16.1 Turn off UAC on Windows Vista

1. Go to Control Panel on Vista

163

2. Click User Accounts

3. Click User Accounts

164

4. Click Turn User Account Control on or off

5. Click to deselect the Turn User Account Control on or off box to turn off UAC

6. Click OK and restart Windows to complete the new setting

165

13.16.2 Enable Privilege Level of Internet Explorer

1. Go to C:\Program Files\Internet Explorer

2. Right click on iexplore.exe

3. Select “Run as administrator” and then the system will be prompted to run IE browser

4. You will be able to use the system after downloading ActiveX while

Vista UAC turned on

166

13.17 Install Wizard Issue on Windows Vista

Because of the hotfix change of Microsoft Windows Vista, users are likely unable to find any device by Install Wizard with Vista OS system. This sudden change of the dynamic ports made the impact to a lot of software providers, not only to our system. You can follow one of the solutions below.

13.17.1 FW Upgrade

For the existing customers, upgrading FW v2.0 is the permanent way to fix the issue. However, version 2.0 Install Wizard is able to search the system with FW v2.0; while version 1.3 Install Wizard is able to search the system with FW 1.3 or previous versions.

13.17.2 Workaround

If you are failed to search system with FW v1.3, please follow the steps below.

1. Conduct in command mode netsh int ipv4 set dynamicport tcp start=10000 num=1000 and netsh int ipv6 set dynamicport tcp start=10000 num=1000

2. Check if it

’s revised successfully netsh int ipv4 show dynamicport tcp and netsh int ipv6 show dynamicport tcp

This workaround solution is issued by Microsoft, for eliminating the issues caused by them. http://support.microsoft.com/kb/929851

Note

Before conducting Install Wizard, remember to put your PC and the unit in the same LAN (the same network, no need to be through the same switch).

Please visit NUUO wiki for more information. http://support.nuuo.com/mediawiki/index.php/NVRmini

167

Appendix – RAID System

Introduction to RAID

RAID (Redundant Array of Independent Disks) allows multiple disk drives to be combined together into a RAID Volume.

You will create a RAID

Volume on your unit when you perform the setup procedure.

The benefits of a RAID can include:

 Higher data transfer rates for increased server performance

 Increased overall storage capacity for a single Volume

 Data redundancy/fault tolerance for ensuring continuous system operation in the event of a disk drive failure

Different RAID levels use different organizational models and have varying benefits. The following outline breaks down the properties for each RAID level supported on this unit:

RAID 0 – Stripe

When a RAID Volume is striped, the read and write blocks of data are interleaved between the sectors of multiple disk drives. Performance is increased, since the workload is balanced between dri ves or “members” that form the RAID Volume. Identical drives are recommended for performance as well as data storage efficiency.

The RAID Volume’s data capacity equals the capacity of the smallest disk drive times the number of disk drives. For example, one 100 GB and three

168

120 GB drives will form a 400 GB (4 x 100 GB) RAID Volume instead of

460 GB.

If disk drives of different capacities are used, there will also be unused capacity on the larger drives.

Because RAID 0 does not offer Fault Tolerance, meaning that you cannot recover your data after a disk drive failure, we do not recommend a RAID 0

Volume for your unit.

RAID 0 Volumes on this unit consist of one or more disk drives.

RAID 1 – Mirror

When a RAID Volume is mirrored, identical data is written to a pair of disk drives, while reads are performed in parallel. The reads are performed using elevator seek and load balancing techniques where the workload is distributed in the most efficient manner. Whichever drive is not busy and is positioned closer to the data will be accessed first.

With RAID 1, if one disk drive fails or has errors, the other mirrored disk drive continues to function. This is called Fault Tolerance. Moreover, if a spare disk drive is present, the spare drive will be used as the replacement drive and data will begin to be mirrored to it from the remaining good drive.

The RAID Volume’s data capacity equals the smaller disk drive. For example, a 100 GB disk drive and a 120 GB disk drive have a combined

169

capacity of 100 GB in a mirrored RAID Volume.

If disk drives of different capacities are used, there will also be unused capacity on the larger drive.

RAID 1 Volumes on this unit consist of two disk drives.

If you want a mirrored RAID Volume with more than two disk drives, see

RAID 10 – Mirror / Stripe for details.

RAID 5 – Block Striping with Distributed Parity

RAID 5 organizes block data and parity data across the disk drives.

Generally, RAID level 5 tends to exhibit lower random write performance due to the heavy workload of parity recalculation for each I/O. RAID 5 works well for file, database, application and web servers.

The capacity of a RAID 5 Volume equals the smallest disk drive times the number of disk drives, minus one. Hence, a RAID 5 Volume with four 100

GB disk drives will have a capacity of 300 GB. A RAID Volume with two 120

GB disk drives and one 100 GB disk drive will have a capacity of 200 GB.

RAID 5 is generally considered to be the most versatile RAID level.

RAID 5 requires a minimum of three disk drives.

170

RAID 10 – Mirror / Stripe

Mirror/Stripe combines both of the RAID 0 and RAID 1 types. RAID 10 can increase performance by reading and writing data in parallel while protecting data with duplication. At least four disk drives are needed for

RAID 10 to be installed. With a four-disk-drive RAID Volume, one drive pair is mirrored together then striped over a second drive pair.

The data capacity RAID 10 Volume equals the capacity of the smallest disk drive times the number of disk drives, divided by two.

In some cases, RAID 10 offers double fault tolerance, depending on which disk drives fail.

RAID 10 Volumes on this unit consist of four disk drives.

Because all of the available disk drives are used for the RAID Volume, you cannot set up a spare drive with RAID 10.

Choosing a RAID Level

There are several issues to consider when choosing the RAID level. The

171

following summarizes some advantages, disadvantages and applications for each choice.

 RAID 0

Advantage

 Implements a striped disk RAID

Volume, the data is broken down into blocks and each block is written to a separate disk drive

 I/O performance is greatly improved by spreading the I/O load across many

Disadvantage

 Not a true RAID because it is not fault tolerant

 The failure of just one drive will result in all data in a RAID Volume being lost

 Should not be used in mission critical channels and drives environments

 No parity calculation overhead is involved

 RAID 1

Advantage

 Simplest RAID storage subsystem design

 Can increase read performance by processing data requests in parallel since the same data resides on two different drives

Disadvantage

 Very high disk overhead - uses only

50% of total capacity



RAID 5

Advantage

 High Read data transaction rate

 Medium Write data transaction rate

 Good aggregate transfer rate

 Most versatile RAID level

 RAID 10

Advantage

 Implemented as a mirrored RAID

 Volume whose segments are RAID 0

RAID Volumes

 High I/O rates are achieved thanks to multiple stripe segments

Disadvantage

 Disk failure has a medium impact on throughput

Disadvantage

 Very high disk overhead – uses only

50% of total capacity

172

Spare Drives

A spare is a disk drive that has been designated to replace a failed disk drive in a RAID Volume. In the event of the failure of a disk drive within a

RAID 1 or three-drive RAID 5 Volume, the spare drive is activated as a member of the RAID Volume to replace a disk drive that has failed.

A spare drive cannot replace the failed drive in a RAID 0 Volume because of the way in which data is written to the disk drives under RAID 0.

A spare drive is not available for a RAID 10 Volume because RAID 10 requires all four disk drives in the unit enclosure. However, when you replace the failed disk drive, the unit will automatically rebuild the RAID

Volume using the new disk drive.

You must designate a disk drive as a Spare. Use the system to designate the Free disk drive as a Spare.

Maintaining a spare drive is a good precaution to protect your RAID Volume integrity in the event of disk drive failure.

Automatic Rebuilding

When a disk drive in your RAID 1, 5, or 10 Volume fails, and a replacement disk drive becomes available, the RAID Volume will rebuild itself to the new disk drive automatically.

For RAID 1 and three-drive RAID 5 Volumes, you can designate a spare drive. If a spare drive is present when the RAID Volume experiences a disk drive failure, the rebuild will start automatically using the spare drive.

For RAID 1, RAID 5, and RAID 10 Volumes without a spare drive, the RAID

Volume will begin to rebuild itself automatically when you remove the failed disk drive and install a new disk drive.

A RAID 0 Volume cannot be rebuilt because of the way in which data is written to the disk drives under RAID 0. Even if there is a designated spare

173

drive, rebuilding is not possible for RAID 0 Volumes.

RAID Volume Migration

Migration is the process of:

1. Changing the RAID level

2. Adding disk drives but keeping the same RAID level

In the migration process, the existing RAID Volume is called the Source.

The proposed RAID Volume is called the Target. Each target RAID Volume has certain requirements and they are different for each RAID level. You must meet all of the requirements in order to successfully migrate a RAID

Volume.

In most cases, you must add one or more disk drives during the migration process. You can never reduce the number of disk drives.

While the migration is running, you can still access the folders on your

RAID Volume and the data they contain.

The following tables show the migration options for a source RAID Volume according to its RAID level. The available target RAID levels are shown with their requirements.

 RAID 0

A RAID 0 source Volume can migrate to the following target RAID levels:

Target

RAID 0 Add disk drives.

Requirement

RAID 1 2 disk drives minimum.

A 1drive RAID 0 can’t migrate to RAID 1. To do this, add 1 disk drive.


At least 1 more disk drive than the RAID 0 RAID Volume.

174

 RAID 1


Target Requirement

RAID 0 Can use same number of disk drives.


At least 1 more disk drive than the RAID 1 RAID Volume.

 RAID 5


Target Requirement

RAID 0 Can use the same number of disk drives.

RAID 5 Add a disk drive.

 RAID 10

A RAID 10 source Volume cannot migrate or add more disk drives.

175

Appendix – Camera Integration

Camera Supporting List

Refer to NUUO website: http://www.nuuo.com/download.php?node=554

Camera Search Tool

ACTi

Arecont

Sony

Stream Profile

Brand/Series

Stream profile is designed for mobile client and lower fps live stream display.

For performance consideration, we fix the resolution and framerate for each brand/series. The list will be updated every version.

Low Profile Minimum Profile

Cameras

Resolution Framerate Resolution Framerate

ACTi

Arecont

Axis

Brickcom

CNB

CNB

CNB

CIF half

CIF

CIF

IGx10xx, ixP40xx ixP4000xx CIF~SXGA

INS2000/IBxxxx/Xpeed IP

IGx2050F, IDC4050xx,

QVGA~D1

QVGA~D1

IXC8050IR,

3~6

3

5

10

0.1~10

0.1~10

0.1~10

CIF half

QCIF

CIF

CIF~SXGA

QVGA~D1

QVGA~D1

5

4

1~2

1

0.1~10

0.1~10

0.1~10

IVC5050xx,IVP5055xx,

IDP5055xx,IXP3055VR

Dahua (Others)

Dahua

Dynacolor

Eneo

Eneo

Eneo

Eneo

HF3211P

GLS-1701/IR

GLS-2104

GLS-2301H

NLC-1401, NLD-1401,

NLS-1401

CIF

D1~1080p

5

0.1~10

QCIF~Full HD 0.1~10

QCIF~Full D1 0.1~10

QCIF~Half D1 0.1~10

CIF~Full D1 0.1~10

CIF 5

CIF

D1~1080p

2

0.1~10

QCIF~Full HD 0.1~10

QCIF~Full D1 0.1~10

QCIF~Half D1 0.1~10

CIF~Full D1 0.1~10

CIF 2

Eneo NXC-1301M, NXC-1302M,

NXC-1401M, NXC-1402M,

CIF 15 CIF 5

176

NXD-1301M, NXD-1302M,

NXD-1401M, NXD-1402M

Fine

Forenix

Grundig

Honeywell

Mobotix

NetworkCamera

Panasonic BB/BL

Panasonic i-pro 3 megapixel

Panasonic i-pro others

Pelco

Samsung SNB-1000, SNB-5000,

SND-1010, SND-5080/F,

SNO-5080R,

SNP-3120/V/VH,

SNP-3430H, SNP-5200,

SNP-5200H, SNV-5080,

SNV-5080R, SPE-100

Samsung

Samsung

SNP-3301, SNP-3370

Samsung

SANTEC (D1)

SANTEC (1.3 Mega)

SNV-7080, SNV-7080R

SANTEC (3 Mega)

SANTEC (video server)

Sanyo HD1, HD3,

HD4

HD1: VCC-HD2500,

VDC-HD3500

HD3: VCC-HD5400,

VCC-HD5600

HD4: VCC-HD4600

Sanyo HD2

SNV-3120, SNB-7000,

SND-7080, SNV-5010,

SNZ-5200

HD2: VCC-HD2100,

VCC-HD2300,

VDC-HD3100,

CIF 1~3

CIF 1~3

QCIF~FullHD 0.1~10

640x368 15

CIF

CIF

CIF

VGA

3

10

4

1

CIF

CIF~D1

CIF

CIF~SXGA

VGA

VGA~D1

VGA~3M

VGA~D1

CIF~VGA

CIF~4 Mega

2

0.1~10

6

CIF 0.1~10

QCIF~FullHD 0.1~10

0.1~10

1~3

1~3

1~3

1~3

3

0.1~3

177

CIF

CIF~4 Mega

0.1~1.5

CIF 0.1~0.5

QCIF~FullHD 0.1~10

640x368

QCIF

CIF

QCIF

VGA

CIF

CIF~D1

CIF

CIF 0.1~10

QCIF~FullHD 0.1~10

CIF~SXGA

VGA

VGA~D1

VGA~3M

VGA~D1

CIF~VGA

5

2

4

2

0.5

1

0.1~10

2

0.1~10

0.3~0.8

0.3~0.8

0.3~0.8

0.3~0.8

1

0.1~3

Sony

StarDot

TRUEN

UDP

Videosec

Videosec

Vista Model C

VDC-HD3300

IBF-211, IDA-210, IP-206M,

QCIF~Full HD 0.1~10

CIF

CIF~Full D1

3

0.1~10

QVGA~VGA

QVGA

0.1~10

5

IS-240

ICS-13, ICS-20F, ID-20

VK2-1080VRD,

CIF~Full HD

QVGA~4CIF

0.1 ~ 10

5~15

VK2-2MPVRD

5 Vista Model A

Vivotek 7000v2/8000

(General)

Vivotek 7000v2/8000

(2 Mega)

Vivotek 8000

(VS series)

Vivotek 8000

Vivotek 8000

Vivotek

IP8330, IP8332, IP8352

IP8362

Vivotek

Vivotek

VK2-540VRD, VK2-600PTZ, CIF

VK2-VGAVFD

CIF

FD8162, FD8362,

FD8362E, IP8162, MD8562

SD8362E

CIF

QCIF~D1

CIF

CIF

CIF

CIF

CIF IP8331, MD7530,

MD7560X, PZ81x1,

PZ81x1W, SD8313E,

SD8312E, SD8311E

5

3

0.1~10

3

5

8

6

3

F7210

CIF

CIF

640x480

5

7

4

Zavio

Zavio (Mega)

Zavio (2 Mega)

178

QCIF

QCIF~D1

CIF

CIF

QCIF

QCIF

QCIF

QCIF~Full HD 0.1~10

CIF

CIF~Full D1

1

0.1~10

QVAG~VGA

QQVGA

0.1~10

5

CIF~Full HD

QVGA~4CIF

0.1 ~ 10

2~15

CIF

CIF

2

2

1

3

6

6

3

3

0.1~10

QCIF

CIF

640x480

3

2

1.3

Add: C Block, 18 Sihyuan St. Jhongjheng District, Taiwan (ROC)

TEL: +886-2-2362-2260

E-mail: [email protected]

179

No results