Axiom® prosthetic overview

PERFORMANCE, FREEDOM, SIMPLICITY
The new dimension
simeda
®
PROSTHETIC RANGE OVERVIEW
FED
customized
&
solutions
A global solution for dental implantology
2
Axiom® prosthetic range overview
p. 3
Axiom® concept, the new dimension
p. 4
Morse tapered internal connection
Management of the emergence profile
Axiom® REG/PX/2.8 range of implants
Prosthetic components for Axiom® REG/PX
p. 4
p. 4
p. 5
p. 6
HEALING SCREWS RANGE
p. 6
IMPRESSION TAKING TECHNIQUES
p. 7
CEMENT-RETAINED PROSTHESIS
p. 8
A wide choice of cement-retained abutments
Aesthetic TITANIUM abutments
Aesthetic ZIRCONIA abutments
Standard TITANIUM abutments
TITANIUM temporary abutments
Gold cast-on abutments
Other abutments for cement-retained restorations
Try-in abutments for cement-retained prosthesis
SCREW-RETAINED PROSTHESIS
Straight conical abutments
Angulated conical abutments
Try-in abutments for screw-retained prosthesis
Pacific
p.18
p.19
p.20
p.21
p.23
p.24
OVERDENTURE
LOCATOR® attachment
SIMEDA®
p. 9
p.10
p.12
p.13
p.15
p.16
p.16
p.17
PROSTHESIS
p.25
p.26
RECOMMENDED INSERTION TIGHTENING TORQUE FOR PROSTHETIC COMPONENTS
p.28
PROSTHETIC INSTRUMENTS
p.29
Prosthetic kit
Torq Control®
Dynamometric ratchet wrench
Prosthetic components for Axiom® 2.8
Axiom 2.8: the incisive choice!
Prosthetic parts for Axiom® 2.8
®
List of materials
This document must be used only after reading Axiom® REG/PX and Axiom® 2.8 user’s guides.
This document does not replace in any way the Axiom® REG/PX and Axiom® 2.8 user’s guides.
p.29
p.29
p.29
p.30
p.31
p.32
p.35
3
A
T H E
N E W
D I M E N S I O N
AXIOM® PROSTHETIC RANGE OVERVIEW
A solution for any kind of prosthetic restoration:
w single-unit, multiple-unit or full-arch restorations,
w cement-retained or screw-retained technique.
A prosthetic range is common to both Axiom® REG* and Axiom® PX implants.
A specific prosthetic range for Axiom® 2.8 implants.
Simeda® solution for customized CAD-CAM prosthesis:
w all restorations : implant-supported and tooth-supported, single-unit and multiple-unit,
w in Titatium, Zirconia or Cobalt-Chromium.
*Axiom® REGULAR
Simeda® Solution
for customized
CAD-CAM prosthesis
Prosthetic solutions
Single-unit
restoration
Cement-retained
prosthesis
Aesthetic
TITANIUM
abutments
Multiple-unit
restoration
Screw-retained
prosthesis
Gold cast-on
abutment
Cement-retained
prosthesis
Full-arch
restoration
Screw-retained
prosthesis
Aesthetic
TITANIUM
abutments
Screw-retained
bar restoration
Conical abutments
Overdenture
Conical abutments
LOCATOR®
attachement
Aesthetic
ZIRCONIA
abutments
Standard
TITANIUM
abutments
Standard
TITANIUM
abutments
TITANIUM
Temporary
abutments
Secondary
parts
Secondary
parts
TITANIUM
temporary
abutments
Gold cast-on
abutment
Pacific
Pacific
TITANIUM
reworkable
abutments
Gold cast-on
abutment
TITANIUM
reworkable
abutments
Symbols used :
CH: coronary height
PEEK
temporary
abutments
Axiom® 2.8
Definitive
abutments
Axiom® 2.8
Ø: diameter
GH: gingival height from the implant neck
ά: angulation of the prosthetic part
The used materials are listed at the end of this document, page 35.
4
AXIOM® CONCEPT, THE NEW DIMENSION
MORSE TAPERED INTERNAL CONNECTION
STABLE, STRONG AND
HERMETIC CONNECTION
GRADE V MEDICAL TITANIUM
1 SINGLE PROSTHETIC CONNECTION !
« PLATFORM-SWITCHING »
w 1 single prosthetic
diameter 2.7 mm.
UNIQUE
CONNECTION
GE
w Three-lobed indexed
conical connection.
THREADED AND SAND-BLASTED NECK
BCP® OSSEO-CONDUCTIVE
SURFACE TREATMENT
SOFT TISSUE MANAGEMENT
NO CONTAMINATION OF
THE ADJACENT TISSUE
w Subcrestal positioning
SUBSTRACTIVE TOPOGRAPHY
MANAGEMENT OF THE EMERGENCE PROFILE
A wide choice of emergence profiles:
0.75
mm
1.5
mm
2.5
mm
3.5
mm
5 GINGIVAL HEIGHTS
4.5
mm
Ø 3.4 mm
Ø 4.0 mm
Ø 5.0 mm
Ø 6.0 mm
4 PROSTHETIC EMERGENCE DIAMETERS
Constant emergence profile from the
healing screw to the final abutment.
5
A
T H E
N E W
D I M E N S I O N
AXIOM® REG/PX/2.8 RANGE OF IMPLANTS
AXIOM® REG RANGE
w Designed for most clinical indications.
w All types of bone.
Ø 3.4 mm
8 mm
10 mm
12 mm
14 mm
16 mm
18 mm
Art. Nb.
OP34080
OP34100
OP34120
OP34140
OP34160
OP34180
Ø 4.0 mm
6.5 mm
8 mm
10 mm
12 mm
14 mm
16 mm
18 mm
Art. Nb.
OP40060
OP40080
OP40100
OP40120
OP40140
OP40160
OP40180
Ø 4.6 mm
6.5 mm
8 mm
10 mm
12 mm
14 mm
Art. Nb.
OP46060
OP46080
OP46100
OP46120
OP46140
Ø 5.2 mm
6.5 mm
8 mm
10 mm
12 mm
14 mm
Art. Nb.
OP52060
OP52080
OP52100
OP52120
OP52140
AXIOM® PX RANGE
w Immediate post-extraction implant placement and low-density bone.
w D1 type bone excluded.
Ø 3.4 mm
8 mm
10 mm
12 mm
14 mm
16 mm
18 mm
Art. Nb.
PX34080
PX34100
PX34120
PX34140
PX34160
PX34180
Ø 4.0 mm
8 mm
10 mm
12 mm
14 mm
16 mm
18 mm
Art. Nb.
PX40080
PX40100
PX40120
PX40140
PX40160
PX40180
Ø 4.6 mm
6.5 mm
8 mm
10 mm
12 mm
14 mm
Art. Nb.
PX46060
PX46080
PX46100
PX46120
PX46140
Ø 5.2 mm
6.5 mm
8 mm
10 mm
12 mm
AXIOM® 2.8 RANGE (P.30-31)
w Restricted mesiodistal space.
w Single restoration in the incisor sector.
w All types of bone.
Ø 2.8 mm
Art. Nb.
10 mm
12 mm
14 mm
OP28100
OP28120
OP28140
Pictures
Axiom® REG and Axiom® PX implants are supplied with the closure screw Art. Nb. OPIM100.
Axiom 2.8 implants are supplied with the healing plug height 2.5 mm Art. Nb. OPHS220.
Art. Nb.
PX52060
PX52080
PX52100
PX52120
6
Ø
HEALING SCREWS
HC
GH
w Supplied Q for single-use.
w Low coronary height (1 mm) available
for placement under removable prosthesis.
Diameter
in mm
Gingival height
(GH)
Ø 3.4
Manual
Coronary height (CH) = 2 mm
Article number
Pictures
Article number
1.5 mm
OPHS310
OPHSF310
2.5 mm
OPHS320
OPHSF320
3.5 mm
OPHS330
OPHSF330
4.5 mm
OPHS340
OPHSF340
0.75 mm
OPHS400
1.5 mm
OPHS410
Pictures
OPHSF400
4
4
4
OPHSF410
4
4
4
4
4
Ø 4.0
2.5 mm
OPHS420
OPHSF420
3.5 mm
OPHS430
OPHSF430
4.5 mm
OPHS440
OPHSF440
0.75 mm
OPHS500
OPHSF500
1.5 mm
OPHS510
5
5
4
4
OPHSF510
5
5
5
5
5
Ø 5.0
Ø 6.0
5
2.5 mm
OPHS520
3.5 mm
OPHS530
OPHSF530
4.5 mm
OPHS540
OPHSF540
1.5 mm
OPHS610
OPHSF610
2.5 mm
OPHS620
OPHSF620
3.5 mm
OPHS630
OPHSF630
4.5 mm
OPHS640
OPHSF640
OPHSF520
5
5
HEALING SCREW (DIAMETER/ REFERENCE HEIGHT)
Ht. 0.75
Ht. 1.5
Ht. 2.5
Ht. 3.5
Ht. 4.5
4
Gingival diameter
Gingival height
Ø 3.4
Ø 4.0
4
4
4
4
4
Ø 5.0
5
5
5
5
5
Ø 6.0
6
6
NEW !
Coronary height (CH) = 1 mm
6
6
Codification valid for coronary heights 2 mm and 1 mm.
7
GE
IMPRESSION TAKING TECHNIQUES
IMPLANT-LEVEL IMPRESSION TAKING
Components
Article number
Pick-up transfer
Short and long Pick-up
screws included
PICK-UP
TECHNIQUE
Implant analog
M1.6 screw included
(Art. Nb. OPTS161)
OPPU100
(unitary)
OPPU100-4
(by 4)
OPIA100
(unitary)
OPIA100-4
(by 4)
Pictures
!
NEW N
DESIG
Manual
Short Pick-up screw
Long Pick-up screw
OPPU101
OPPU102
Pop-in transfer
OPPI100
(unitary)
Pop-in screw included
OPPI100-4
(by 4)
M1.6 titanium screw
OPTS161
!
NEW N
DESIG
POP-IN
TECHNIQUE
Implant analog
M1.6 screw included
(Art. Nb. OPTS161)
OPIA100
(unitary)
OPIA100-4
(by 4)
STANDARD TITANIUM ABUTMENT-LEVEL IMPRESSION TAKING
w Impression taking technique restricting intra-oral handlings.
w Standard titanium abutments are supplied sterile (Cf. page 13).
Article number
Components
Ø 3.4
STANDARD
abutment transfer
Ø 4.0
Ø 5.0
OPTT100
OPTT100-5
Pictures
Ø 6.0
!
NEW N
(unitary)
(by 5)
DESIG
STANDARD abutment
analog CH 4 mm
OPSA304
OPSA404
OPSA504
OPSA604
STANDARD abutment
analog CH 6 mm
OPSA306
OPSA406
OPSA506
OPSA606
8
CEMENT-RETAINED PROSTHESIS FOR AXIOM® REG/PX
For single-unit and multiple-unit restorations
Simeda® Solution
for customized
CAD-CAM prosthesis
Prosthetic solutions
Single-unit
restoration
Cement-retained
prosthesis
Aesthetic
TITANIUM
abutments
Multiple-unit
restoration
Screw-retained
prosthesis
Gold cast-on
abutment
Cement-retained
prosthesis
Aesthetic
TITANIUM
abutments
Full-arch
restoration
Screw-retained
prosthesis
Screw-retained
bar restoration
Conical abutments
Overdenture
Conical abutments
LOCATOR®
attachement
Aesthetic
ZIRCONIA
abutments
Standard
TITANIUM
abutments
Standard
TITANIUM
abutments
TITANIUM
temporary
abutments
Secondary
parts
Secondary
parts
Gold cast-on
abutment
Pacific
Pacific
TITANIUM
temporary
abutments
TITANIUM
reworkable
abutments
Gold cast-on
abutment
TITANIUM
reworkable
abutments
PEEK
temporary
abutments
Axiom® 2.8
Definitive
abutments
Axiom® 2.8
9
GE
A WIDE CHOICE OF CEMENT-RETAINED ABUTMENTS
Neck of
tooth
diameter
An inlaycore for every tooth
Tooth and prosthetic profile fitting
Tooth
Emergence profile (mm)
Diameter
Mini
Maxi
ø 3.4
ø 4.0
ø 5.0
ø 6.0
Mandibular incisor
Mesiodistal
2.9
4.1
•
•
Maxillary central incisor
Mesiodistal
5.5
7.6
•
•
•
•
•
•
Maxillary lateral incisor
Mesiodistal
4.1
5.2
Maxillary canine
Mesiodistal
5.3
6.4
Mandibular canine
Mesiodistal
4.5
6
Maxillary first molar
Mesiodistal
7.5
9
Maxillary first premolar
Mesiodistal
3.8
5.5
•
•
10%
•
AESTHETIC TITANIUM ABUTMENTS
w Straight or angulated 7°, 15°, 23°.
w 4 diameters.
w 5 gingival heights.
w Aesthetic abutment shoulder.
AESTHETIC ZIRCONIA ABUTMENTS
w Straight or angulated 15°.
w 2 diameters.
w 2 gingival heights.
w Aesthetic abutment shoulder.
STANDARD TITANIUM ABUTMENTS
w Straight or angulated 15°, 23°.
w 4 diameters.
w 3 gingival heights.
w 2 coronary heights for straight components.
w An adequate designed abutment shoulder.
For an easy prosthetic restoration, no rework necessary.
Supplied Q for an immediate placement.
TEMPORARY TITANIUM ABUTMENTS
GOLD CAST-ON ABUTMENTS
OTHER ABUTMENTS FOR CEMENT-RETAINED RESTORATIONS
w Reworkable titanium abutment: custom-made abutment.
TRY-IN ABUTMENTS FOR CEMENT-RETAINED ABUTMENTS
•
•
•
•
10
AESTHETIC TITANIUM ABUTMENTS
w Single-unit or multiple-unit restorations.
w 56 components available.
w Aesthetic abutment shoulder.
w Tulip-shaped gingival profile for
abutments with gingival height
Ø
from 0.75 to 3.5 mm.
w Specific gingival profile for
abutments with gingival height 4.5 mm
(cf. « Special case » hereafter).
w Three-lobe indexation.
Angulation (ά)
Diameter
in mm
Straight 0°
Ø 6.0
2.5 mm
OPAT430
4.5 mm
OPAT440
0.75 mm
OPAT500
OPAT510
Ø 4.0
Ø 5.0
OPAT520
3.5 mm
OPAT530
4.5 mm
OPAT540
1.5 mm
OPAT610
2.5 mm
NEW !
OPAT620
3.5 mm
OPAT630
4.5 mm
OPAT640
OPAT31-7
2.5 mm
NEW !
OPAT32-7
3.5 mm
OPAT33-7
4.5 mm
OPAT34-7
0.75 mm
OPAT40-7
OPAT41-7
1.5 mm
7°
OPAT420
3.5 mm
2.5 mm
2.5 mm
NEW !
OPAT42-7
3.5 mm
OPAT43-7
4.5 mm
OPAT44-7
0.75 mm
OPAT50-7
1.5 mm
OPAT51-7
2.5 mm
NEW !
Manual
OPTS161
OPAT410
NEW !
M1.6 Black Tite®
permanent screw
M1.6 titanium screw
OPAT400
1.5 mm
Ø 3.4
GH
0.75 mm
NEW !
SUPPLIED
WITH
OPTS160
Article number
1.5 mm
Ø 5.0
CH = 7 mm
Gingival height
(GH)
1.5 mm
Ø 4.0
25
N.cm
ά
OPAT52-7
3.5 mm
OPAT53-7
4.5 mm
OPAT54-7
Pictures
11
GE
Angulation (ά)
Diameter
in mm
Ø 3.4
Ø 4.0
15°
Gingival height
(GH)
Article number
1.5 mm
OPAT311
2.5 mm
NEW !
OPAT331
4.5 mm
OPAT341
0.75 mm
OPAT401
1.5 mm
OPAT411
NEW !
Ø 6.0
OPAT431
4.5 mm
OPAT441
0.75 mm
OPAT501
OPAT511
2.5 mm
NEW !
23°
OPAT531
4.5 mm
OPAT541
1.5 mm
OPAT611
2.5 mm
NEW !
OPAT621
3.5 mm
OPAT631
4.5 mm
OPAT641
0.75 mm
OPAT402
OPAT412
2.5 mm
NEW !
OPAT422
3.5 mm
OPAT432
4.5 mm
OPAT442
0.75 mm
OPAT502
OPAT512
1.5 mm
Ø 5.0
OPAT521
3.5 mm
1.5 mm
Ø 4.0
OPAT421
3.5 mm
1.5 mm
Ø 5.0
OPAT321
3.5 mm
2.5 mm
2.5 mm
Pictures
NEW !
OPAT522
3.5 mm
OPAT532
4.5 mm
OPAT542
SPECIAL CASE :
Gingival height 4.5 mm aesthetic TITANIUM abutments have
a specific gingival profile to be used in the following situations:
w Gingival height of 4.5 mm and coronary height of 7 mm.
w Gingival height of 2.5 mm and coronary height of 9 mm.
In order to obtain this abutment with a coronary height of 9 mm,
the laboratory should rework the 2 mm cylindrical part.
7 mm
2 mm
4.5 mm
2.5 mm
12
AESTHETIC ZIRCONIA ABUTMENTS
25
N.cm
w Single-unit restoration
in the anterior region.
w Biocompatible zirconia.
w Aesthetic abutment shoulder.
w Three-lobe indexation.
Angulation (ά)
Diameter
in mm
ά
CH = 7 mm
M1.6 definitive Black Tite®
screw for aesthetic
ZIRCONIA
abutments*
Ø
GH
Manual
M1.6 titanium screw
for aesthetic ZIRCONIA
abutments*
Gingival height
(GH)
Article number
1.5 mm
OPAZ410
3.5 mm
OPAZ430
1.5 mm
OPAZ510
3.5 mm
OPAZ530
1.5 mm
OPAZ411
3.5 mm
OPAZ431
1.5 mm
OPAZ511
3.5 mm
OPAZ531
Pictures
Ø 4.0
Straight 0°
Ø 5.0
Ø 4.0
15°
Ø 5.0
*Specific screws for aesthetic ZIRCONIA abutments:
Prosthetic screw
M1.6 screw for aesthetic ZIRCONIA
abutments Gh = 1.5 mm
M1.6 screw for aesthetic ZIRCONIA
abutments Gh = 3.5 mm
SUPPLIED
WITH
Gingival height
(GH)
Article number
Definitive
OPAZ010
Laboratory
OPAZ011
Definitive
OPAZ030
Laboratory
OPAZ031
Pictures
SUPPLIED
WITH
13
GE
STANDARD TITANIUM ABUTMENTS
w Single-unit or multiple-unit restorations.
w 36 components available.
w Supplied Q for an immediate placement:
- restrict intra-oral handlings.
- preserve soft tissues.
w Dedicated secondary components:
- Specific transfers and analogs (Cf. page 7).
- Castable copings for single-unit or multiple-unit
restoration, no rework necessary.
- Protective caps.
w Standard TITANIUM abutment-level impression
taking: Cf. page 7.
25
ά
N.cm
CH
Ø
M1.6 Black Tite®
definitive screw
OPTS160
GH
Manual
M1.6 titanium screw
OPTS161
STRAIGHT STANDARD TITANIUM ABUTMENTS
w With three-lobe indexation.
w Available in 2 coronary heights : 4 and 6 mm.
Diameter
in mm
Ø 3.4
Ø 4.0
Ø 5.0
Ø 6.0
Gingival height
(GH)
Coronary height (CH) = 4 mm
Article number
Pictures
SUPPLIED
WITH
Coronary height (CH) = 6 mm
Article number
1.5 mm
OPST314
OPST316
2.5 mm
OPST324
OPST326
3.5 mm
OPST334
OPST336
1.5 mm
OPST414
OPST416
2.5 mm
OPST424
OPST426
3.5 mm
OPST434
OPST436
1.5 mm
OPST514
OPST516
2.5 mm
OPST524
OPST526
3.5 mm
OPST534
OPST536
1.5 mm
OPST614
OPST616
2.5 mm
OPST624
OPST626
3.5 mm
OPST634
OPST636
Pictures
14
ANGULATED STANDARD TITANIUM ABUTMENTS
w Without three-lobe indexation.
Angulation (ά)
Diameter
in mm
Ø 4.0
w Coronary height 6 mm.
Gingival height
(GH)
Article number
1.5 mm
OPST416_15
2.5 mm
OPST426_15
3.5 mm
OPST436_15
1.5 mm
OPST516_15
2.5 mm
OPST526_15
3.5 mm
OPST536_15
1.5 mm
OPST416_23
2.5 mm
OPST426_23
3.5 mm
OPST436_23
1.5 mm
OPST516_23
2.5 mm
OPST526_23
3.5 mm
OPST536_23
Pictures
15°
Ø 5.0
Ø 4.0
23°
Ø 5.0
SECONDARY PARTS FOR STANDARD TITANIUM ABUTMENTS
w Analogs and transfers for standard TITANIUM abutment-level impression taking: cf page 7.
w PEEK protective cap and castable coping for single-unit and multiple-unit restoration.
PEEK protective
cap
Diameter
in mm
PMMA castable coping
Coronary height
(CH)
Single-unit
Anti-rotational
Multiple-unit
Rotational
4 mm
OPPC304
OPCA304
OPCR304
6 mm
OPPC306
OPCA306
OPCR306
4 mm
OPPC404
OPCA404
OPCR404
6 mm
OPPC406
OPCA406
OPCR406
4 mm
OPPC504
OPCA504
OPCR504
6 mm
OPPC506
OPCA506
OPCR506
4 mm
OPPC604
OPCA604
OPCR604
6 mm
OPPC606
OPCA606
OPCR606
Ø 3.4
Ø 4.0
Ø 5.0
Ø 6.0
15
GE
TITANIUM TEMPORARY ABUTMENTS
!
NEW N
DESIG
w Temporary single-unit
or multiple-unit restoration.
w Retention grooves.
w With three-lobe indexation.
w Supplied Q.
w Reworkable.
Manual
CH = 6 mm
Laboratory
screw
OPTS162
Ø
GH
25
N.cm
M1.6 titanium screw
OPTS161
Diameter
in mm
Ø 3.4
Ø 4.0
Ø 5.0
Ø 6.0
Gingival height
(GH)
Article number
1.5 mm
OPTP310
2.5 mm
OPTP320
3.5 mm
OPTP330
4.5 mm
OPTP340
0.75 mm
OPTP400
1.5 mm
OPTP410
2.5 mm
OPTP420
3.5 mm
OPTP430
4.5 mm
OPTP440
0.75 mm
OPTP500
1.5 mm
OPTP510
2.5 mm
OPTP520
3.5 mm
OPTP530
4.5 mm
OPTP540
1.5 mm
OPTP610
2.5 mm
OPTP620
3.5 mm
OPTP630
4.5 mm
OPTP640
Pictures
SUPPLIED
WITH
16
GOLD CAST-ON ABUTMENTS
2 GOLD CAST-ON PLATFORMS
(see the component specification on page 35)
w CERAMICOR or PIVOSYL.
w Single-unit or multiple-unit cement-retained restoration.
w Single-unit screw-retained prosthesis.
w With three-lobe indexation.
NEW !
Manual
CH = 9 mm
Ø = 4 mm
M1.6 titanium
screw
Long laboratory
screw
OPTS161
OPTS162
25
GH = 1.5 mm
SUPPLIED
WITH
N.cm
M1.6 Black Tite®
definitive screw
OPOG110
CERAMICOR
OPTS160
OPOG100
PIVOSYL*
OTHER ABUTMENTS FOR
CEMENT-RETAINED RESTORATIONS
25
N.cm
REWORKABLE ABUTMENT
w Single-unit or multiple-unit
restoration.
w Reworkable solution,
custom-made.
w Medical grade V titanium.
CH = 7 mm
SUPPLIED
WITH
M1.6 Black Tite®
definitive screw
OPTS160
Ø = 4 mm
GH = 1.5 mm
Manual
OPFS100
M1.6 titanium
screw
OPTS161
*While stocks last.
17
GE
TRY-IN ABUTMENTS FOR CEMENT-RETAINED PROSTHESIS
ά
CH = 7 mm
TRY-IN ABUTMENTS FOR AXIOM® REG AND AXIOM® PX
w Medical titanium.
w With three-lobe indexation.
Angulation (ά)
Straight 0°
7°
15°
23°
Ø = 4 mm
GH
Gingival height
(GH)
Article number
0.75 mm
OPSF006
1.5 mm
OPSF016
2.5 mm
OPSF026
3.5 mm
OPSF036
4.5 mm
OPSF046
0.75 mm
OPAF00-7
1.5 mm
OPAF01-7
2.5 mm
NEW !
OPAF02-7
3.5 mm
OPAF03-7
4.5 mm
OPAF04-7
0.75 mm
OPAF001
1.5 mm
OPAF011
2.5 mm
OPAF021
3.5 mm
OPAF031
4.5 mm
OPAF041
0.75 mm
OPAF002
1.5 mm
OPAF012
2.5 mm
OPAF022
3.5 mm
OPAF032
4.5 mm
OPAF042
Pictures
18
SCREW-RETAINED PROSTHESIS FOR AXIOM® REG/PX
For single-unit, multiple-unit or full-arch restoration
w Single-unit screw-retained
restoration:
w Multiple-unit or full-arch
restoration:
- Gold cast-on abutment (cf p.16).
Range of conical abutments:
w Specific solutions for
screw-retained bar
restoration:
- pacific solution available
with straight conical abutment.
- straight conical abutments.
- angulated conical abutments.
Simeda® Solution
for customized
CAD-CAM prosthesis
Prosthetic solutions
Single-unit
restoration
Cement-retained
prosthesis
Aesthetic
TITANIUM
abutments
Multiple-unit
restoration
Screw-retained
prosthesis
Gold cast-on
abutment
Cement-retained
prosthesis
Aesthetic
TITANIUM
abutments
Aesthetic
ZIRCONIA
abutments
Standard
TITANIUM
abutments
Standard
TITANIUM
abutments
TITANIUM
temporary
abutments
TITANIUM
temporary
abutments
Gold cast-on
abutment
TITANIUM
reworkable
abutments
Gold cast-on
abutment
TITANIUM
reworkable
abutments
PEEK
temporary
abutments
Axiom® 2.8
Definitive
abutments
Axiom® 2.8
Full-arch
restoration
Screw-retained
prosthesis
Screw-retained
bar restoration
Conical abutments
Overdenture
Conical abutments
LOCATOR®
attachement
Secondary
parts
Secondary
parts
Pacific
Pacific
19
GE
STRAIGHT CONICAL ABUTMENTS
w Multiple-unit or full-arch restoration on parallel implants.
w Supplied Q.
Gingival height
(GH)
Article number
1.5 mm
OPSC010
Ø = 4 mm
Pictures
CH = 1 mm
GH
25
N.cm
2.5 mm
OPSC020
3.5 mm
OPSC030
Components
PROSTHETIC
PARTS ON
STRAIGHT
CONICAL
ABUTMENTS
Article number
Titanium temporary coping
OPSC200
Titanium protective cap
(supplied Q)
OPSC300
PMMA castable coping
OPSC100
CERAMICOR gold cast-on coping
PIVOSYL gold cast-on coping*
OPSC410
OPSC400
Pictures
!
NEW N
15
DESIG
N.cm
!
NEW N
DESIG
15
N.cm
NEW !
M1.4 Black Tite®
definitive screw
OPAC140
*While stocks last.
Components
Pick-up abutment transfer
STRAIGHT
CONICAL
ABUTMENT-LEVEL
IMPRESSION
TAKING
PICK-UP
or
POP-IN
techniques.
Supplied with short and long
pick-up screws
Article number
OPSC500
(unitary)
OPSC500-4 (by 4)
Short pick-up screw
OPAC501
Long pick-up screw
OPAC502
Pop-in abutment transfer
Conical abutment analog
Supplied with M1.4
titanium screw
OPSC600
(unitary)
OPSC600-4 (by 4)
Pictures
!
NEW N
DESIG
!
NEW N
DESIG
!
NEW N
DESIG
Manual
OPSC700
(unitary)
OPSC700-4 (by 4)
M1.4 titanium screw
OPAC141
20
Ø = 4.8 mm
ANGULATED CONICAL ABUTMENTS
w Multiple-unit and full-arch restoration on angulated implants.
w With or without three-lobe indexation.
w Supplied Q.
w Threaded gripper wrench Art. Nb. OPCF100.
CH = 3.5 mm
ά
H
!
NEW N
DESIG
Angulation (ά)
18°
30°
Height (H)
Article number Article number
with three-lobe without three-lobe
N.cm
2.5 mm
OPAC022
OPACR022
M1.6 Black Tite®
definitive screw
3.5 mm
OPAC032
OPACR032
OPTS160
4.5 mm
OPAC042
OPACR042
2.5 mm
OPAC023
OPACR023
3.5 mm
OPAC033
OPACR033
4.5 mm
OPAC043
OPACR043
Components
PROSTHETIC
PARTS ON
ANGULATED
CONICAL
ABUTMENTS
25
Pictures
Manual
M1.6 titanium screw
OPTS161
Article number
Titanium temporary coping
OPAC200
Titanium protective cap
Supplied Q
OPAC300
Pictures
15
N.cm
!
NEW N
DESIG
15
N.cm
M1.4 Black Tite®
definitive screw
OPAC140
PMMA castable coping
OPAC100
CERAMICOR gold cast-on coping
PIVOSYL gold cast-on coping*
OPAC410
OPAC400
NEW !
*While stocks last.
21
GE
Components
Pick-up abutment transfer
Supplied with short
and long pick-up screws
ANGULATED
CONICAL
ABUTMENT-LEVEL
IMPRESSION
TAKING
Pick-up
or Pop-in
technique
Short pick-up screw
Long pick-up screw
Article number
OPAC500
Pictures
!
NEW N
(unitary)
DESIG
OPAC500-4 (by 4)
OPAC501
OPAC502
Manual
Pop-in abutment transfer
Conical abutment analog
Supplied with M1.4
titanium screw
OPAC600
(unitary)
OPAC600-4 (by 4)
OPAC700
(unitary)
OPAC700-4 (by 4)
!
NEW N
DESIG
M1.4 titanium screw
OPAC141
22
TRY-IN ABUTMENTS FOR
SCREW-RETAINED PROSTHESIS
Ø = 4.8 mm
ά
TRY-IN ABUTMENT FOR ANGULATED CONICAL ABUTMENT
w The emergence profile is the same as for the angulated abutments.
w Available in indexed or non-indexed version.
w Manual placement with the threaded gripper wrench
Art. Nb. OPCF100
w Medical titanium.
Angulation (ά)
18°
30°
Gingival height
(GH)
Article number
for indexed
abutment
2.5 mm
OPCF022
OPCFR22
3.5 mm
OPCF032
OPCFR32
4.5 mm
OPCF042
OPCFR42
2.5 mm
OPCF023
OPCFR23
3.5 mm
OPCF033
OPCFR33
4.5 mm
OPCF043
OPCFR43
Pictures
Article number
for non-indexed
abutment
GH
Pictures
23
GE
PACIFIC
NEW !
Introducing a ring bonded between the straight
conical abutment and the framework cast by the
laboratory, the Pacific system ensures the passive fit
to be obtained during permanent screwing in the
mouth.*
Manual
Ø = 4 mm
M1.4 titanium screw
4.1 mm
15
M1.4 Black Tite®
definitive screw
E
Article number
SUPPLIED
WITH
N.cm
w Multiple-unit or full-arch screw-retained prosthesis.
It can be used only with straight conical
abutments (Cf. page 19).
Components
OPAC141
OPAC140
Pictures
Pacific bonding ring
OPSC800
NEW !
Pacific analog and laboratory screw
OPSC910
NEW !
Castable coping
OPSC901
NEW !
Complete kit for Pacific system
KIT OPSC800
-
THE COMPLETE KIT FOR PACIFIC SYSTEM (KIT OPSC800) IS INCLUDING:
- 1 Pacific bonding ring Art. Nb. OPSC800 and the permanent M1.4 screw Art. Nb. OPAC140.
- 1 Pacific analog and the 2 laboratory screws (M1.4 laboratory screw Art. Nb. OPAC141
and short Pick-up screw Art. Nb. OPAC501).
- 1 castable coping Art. Nb. OPSC901.
Glue is not supplied.
*For more information, please refer to the Axiom® REG/PX user guide Cf. pages 40-41.
NEW !
24
OVERDENTURE
For full-arch prosthesis
Simeda® Solution
for customized
CAD-CAM prosthesis
Prosthetic solutions
Single-unit
restoration
Cement-retained
prosthesis
Aesthetic
TITANIUM
abutments
Multiple-unit
restoration
Screw-retained
prosthesis
Gold cast-on
abutment
Cement-retained
prosthesis
Aesthetic
TITANIUM
abutments
Full-arch
restoration
Screw-retained
prosthesis
Screw-retained
bar restoration
Conical abutments
Overdenture
Conical abutments
LOCATOR®
attachement
Aesthetic
ZIRCONIA
abutments
Standard
TITANIUM
abutments
Standard
TITANIUM
abutments
TITANIUM
temporary
abutments
Secondary
parts
Secondary
parts
TITANIUM
temporary
abutments
Gold cast-on
abutment
Pacific
Pacific
TITANIUM
reworkable
abutments
Gold cast-on
abutment
TITANIUM
reworkable
abutments
PEEK
temporary
abutments
Axiom® 2.8
Definitive
abutments
Axiom® 2.8
25
GE
LOCATOR® ATTACHEMENT
STABILIZATION OF FULL-ARCH PROSTHESIS
> Can be used with 2 implants with angulation < 20°.
Gingival height
(GH)
Article number
1.5 mm
OPLA010
Pictures
CH = 1.6 mm
Ø 4 mm
GH
25
N.cm
2.5 mm
OPLA020
3.5 mm
OPLA030
Secondary parts
Article number
Male LOCATOR® - Art. Nb. 8519
Titanium, Medical Grade Polyethylene & Nylon
OPLA100
Standard retention replacement male “Clear” – By 4
Medical Grade Nylon
OPLA200
Light retention replacement male “Pink” – By 4
Medical Grade Nylon
OPLA300
Extra-light retention replacement male “Blue“
By 4 - Medical Grade Nylon
OPLA400
Impression taking
Article number
LOCATOR® transfer - By 4
Medical Grade Aluminium
OPLA500
LOCATOR® analog 4 mm - By 4
Medical Grade Aluminium
OPLA600
Pictures
Pictures
STABILIZATION OF FULL-ARCH PROSTHESIS – REQUIRED MATERIAL
Housing with black low density: temporary retention.
Can be used during restoration procedures.
Spacer
ring
Housing «Clear»
with
black low
density
«Pink»
«Blue»
“ Clear” standard retention replacement male:
standard retention.
“Pink” light retention replacement male:
average retention.
“Blue” extra-light retention replacement male:
low retention.
Three-piece
multifunction instrument
Male removal tool
Male seating tool
Abutment driver
26
SIMEDA®
PROSTHESIS
> Single-unit, multiple-unit and complete denture restorations.
> Cement-retained or screw-retained restorations.
> Large selection of materials: Titanium, Sina Z and Sina T/T+ Zirconia, Cobalt-Chromium, PMMA, PEEK
PEEK.
> Free downloadable implant library for all usual implant systems, including Axiom® REG and Axiom® PX.
> For every dental laboratory, whether or not equipped with CAD-CAM technology
technology.
Simeda® Solution
for customized
CAD-CAM prosthesis
Prosthetic solutions
Single-unit
restoration
Cement-retained
prosthesis
Aesthetic
TITANIUM
abutments
Multiple-unit
restoration
Screw-retained
prosthesis
Gold cast-on
abutment
Cement-retained
prosthesis
Aesthetic
TITANIUM
abutments
Full-arch
restoration
Screw-retained
prosthesis
Screw-retained
bar restoration
Conical abutments
Overdenture
Conical abutments
LOCATOR®
attachement
Aesthetic
ZIRCONIA
abutments
Standard
TITANIUM
abutments
Standard
TITANIUM
abutments
TITANIUM
temporary
abutments
Secondary
parts
Secondary
parts
TITANIUM
temporary
abutments
Gold cast-on
abutment
Pacific
Pacific
TITANIUM
reworkable
abutments
Gold cast-on
abutment
TITANIUM
reworkable
abutments
PEEK
temporary
abutments
Axiom® 2.8
Definitive
abutments
Axiom® 2.8
27
B
Zirconia
CoCr**
Machining
Customized abutment
Simeda® Abutment
Sina Z
-
Screw-retained single restoration
Simeda® Anatomic Abutment
Sina Z
IMPLANT-SUPPORTED RESTORATIONS
Illustration
Titanium
Bridge cemented on abutments
Simeda® Bridge
CoCr**
DMLS
2 jours
-
Sina Z and Sina T
Implant bridge
Simeda® Implant Bridge
-
Sina Z
Screwed on conical abutments or implant-supported*
Implant-supported overdenture
Simeda® Implant Overdenture
Screwed on conical abutments or implant-supported*
Bar for implant-supported removable prosthesis
Simeda® Implant Bar
Screwed on conical abutments or implant-supported*
TOOTH-SUPPORTED RESTORATIONS
Illustration
Titanium
-
-
-
-
-
-
Zirconia
CoCr**
Machining
CoCr**
DMLS
Sina Z and Sina
T
Coping and Bridge
Simeda® Coping & Bridge
-
Sina Z and
Sina T/T+
-
-
Crown (including Full-zirconia crown)
Simeda® Crown
-
Sina Z and Sina T
Sina T+ for
Full-zirconia
crown
-
-
Telescopic crown
Simeda® Telescope Crown
-
Sina Z
-
-
Inlay/Onlay and Laminate
Simeda® Inlay/Onlay & Laminate
*Available direct on implant for non-conical connection.
YEAR
WARRANTY
**CoCr : Cobalt Chromium.
simeda
Except provisionals
For modeling the model on Axiom®abutments, the laboratory technician can use the castable copings
Art. Nb. OPSC100 and OPAC100 (see p.19-20)
28
RECOMMENDED INSERTION TIGHTENING
TORQUE FOR PROSTHETIC COMPONENTS
For Axiom® 2.8 components, please refer to page 32.
Components
Tightening
Torque
Cover screw
OPIM100
Short hexagonal wrench IN CHECV
or long IN CHELV
Manual
5-10 N.cm
Healing screws
Coronary heights 2 mm and 1 mm
Short hexagonal wrench IN CHECV
or long IN CHELV
Manual
5-10 N.cm
Definitive M1.6 “Black Tite” screw for cement-retained
abutment or angulated conical abutment
OPTS160 for titanium abutments
OPAZ010 for zirconia abutments height 1.5 mm
OPAZ030 for zirconia abutments height 3.5 mm
Definitive M1.4 “Black Tite” screw for straight
and angulated conical abutment
OPAC140
Short hexagonal wrench IN CHECV
or long IN CHELV
+ Dynamometric ratchet wrench IN CCD
or
Short hexagonal mandrel IN MHECV
or long IN MHELV
+ TORQ CONTROL®
25 N.cm
Short hexagonal wrench IN CHECV
or long IN CHELV
+ Dynamometric ratchet wrench IN CCD
15 N.cm
or
Short hexagonal mandrel IN MHECV
or long IN MHELV
+ TORQ CONTROL®
Wrench for straight conical abutment OPCP160
+ Dynamometric ratchet wrench IN CCD
Straight conical abutment
25 N.cm
or
Mandrel for straight conical abutment OPMP250
+ TORQ CONTROL®
LOCATOR® abutment
LOCATOR® wrench OPCL150
+ Dynamometric ratchet wrench IN CCD
or
LOCATOR® mandrel OPML230
+ TORQ CONTROL®
LOCATOR® retention
replacement males
LOCATOR® wrench - Three-piece multifunction instrument
OPCL3E1
25 N.cm
NA
SCREWS USED IN THE LABORATORY - Screwed manually (5-10 N.cm) with the short hexagonal wrench IN CHECV or long IN CHELV.
Titanium M1.6 screw
Titanium M1.4 screw
for conical abutment
Laboratory screws
On implant OPTS162
OPTS161
For zirconia abutment For zirconia abutment
height 1.5 mm
height 3.5 mm
OPAZ011
OPAZ031
OPAC141
On conical
abutment
OPAC501
OPAC502
29
GE
PROSTHETIC INSTRUMENTS
AXIOM® REG/PX COMMON PROSTHETIC KIT
Art. Nb. IN MOD OPP
Dynamometric
ratchet wrench
LOCATOR®
3 in 1 wrench
OPCL3E1
Hexagonal
mandrels
Short : IN MHECV
Long : IN MHELV
Mandrel for straight
conical abutment
IN CCD
Hexagonal wrenches
Short : IN CHECV
Long : IN CHELV
Straight conical
abutment wrench
OPCP160
OPMP250
LOCATOR® mandrel
LOCATOR® wrench
OMPL230
OPCL150
UNIVERSAL TORQUE WRENCH TORQ CONTROL®
Art. Nb. 15501
w Perfect control of torque.
w 7 torques values: 10/ 15/ 20/ 25/ 30/ 32/ 35 N.cm.
N.cm
w Optimized access in the mouth thanks
to the micro-head.
w Lightweight: only 135g !
DYNAMOMETRIC RATCHET WRENCH
Art. Nb. IN CCD
w Tightening torques: 15/ 25/ 35 N.cm.
30
PROSTHETIC COMPONENTS FOR AXIOM® 2.8
Simeda® Solution
for customized
CAD-CAM prosthesis
Prosthetic solutions
Single-unit
restoration
Cement-retained
prosthesis
Aesthetic
TITANIUM
abutments
Multiple-unit
restoration
Screw-retained
prosthesis
Gold cast-on
abutment
Cement-retained
prosthesis
Aesthetic
TITANIUM
abutments
Full-arch
restoration
Screw-retained
prosthesis
Screw-retained
bar restoration
Conical abutments
Overdenture
Conical abutments
LOCATOR®
attachement
Aesthetic
ZIRCONIA
abutments
Standard
TITANIUM
abutments
Standard
TITANIUM
abutments
TITANIUM
temporary
abutments
Secondary
parts
Secondary
parts
TITANIUM
temporary
abutments
Gold cast-on
abutment
Pacific
Pacific
TITANIUM
reworkable
abutments
Gold cast-on
abutment
TITANIUM
reworkable
abutments
PEEK
temporary
abutments
Axiom® 2.8
Definitive
abutments
Axiom® 2.8
31
B
AXIOM® 2.8 THE INCISIVE CHOICE !
Single-unit restoration of the incisor region in cases presenting
a restricted mesiodistal space.
TITANIUM ABUTMENTS DIAMETER 2.8 mm
TION !
A
V
O
N
IN
IMPACTED PROSTHESIS
w Morse tapered angulation 3° x 4 mm depth.
w Components set through impaction.
w Stable and hermetically sealed.
w « Platform-switching ».
w Constant emergence profile between healing
plug and impacted permanent abutment.
w Ability to cement the
crown extra-orally.
Ø 2.0 mm
2.8 mm
CALIBRATED IMPACTING FOR DEFINITIVE ABUTMENTS
SAFE LOCK® is an instrument to automatically calibrate the impaction
which is connected onto a micro-motor.
The impaction is completely controlled, with no adverse effects for the patient.
The system is unique and simple to use:
w Connect the SAFE LOCK® to the micro-motor.
w Place the SAFE LOCK® tip on the abutment.
w The impacts are automatically triggered when activated.
w 1, 2, 3, 4, 5 ... Successfully controlled impaction !
32
PROSTHETIC PARTS FOR AXIOM® 2.8
PEEK COVER PLUG AND HEALING PLUG FOR AXIOM® 2.8
w Peek plug for a recommended placement period of 180 days maximum
maximum.
w MANUAL placement using threaded gripper wrench Art. Nb. OPCF100.
w Supplied Q for single-use.
Components
Healing plug
Pictures
OPIM028
OPIM028-4
Cover plug
Components
Article number
Gingival height
(GH)
Article number
1.0 mm
OPHS210
2.5 mm
OPHS220
4.0 mm
OPHS240
5.5 mm
OPHS250
Pictures
NEW !
CH = 2 mm
GH
PEEK TEMPORARY ABUTMENTS FOR AXIOM® 2.8
NEW !
w Temporary single-unit restoration.
w Peek abutments for a recommended placement period of 180 days maximum.
w Retention grooves and flat surface.
w Supplied Q for single-use.
w Reworkable.
w MANUAL placement.
OPCF100
Gingival height
(GH)
Article number
1.0 mm
OPTP210
2.5 mm
OPTP220
4.0 mm
OPTP240
5.5 mm
OPTP250
OPOP028
Pictures
CH = 6 mm
NEW !
GH
33
B
ά
DEFINITIVE TITANIUM ABUTMENTS
Ø 2.8 mm
w 16 components available.
w Aesthetic abutment shoulder.
w Supplied Q.
w Calibrated impacting.
Angulation (ά)
Gingival height
(GH)
Article number
1.0 mm
OPAT210
2.5 mm
OPAT220
4.0 mm
OPAT240
5.5 mm
OPAT250
1.0 mm
OPAT211
2.5 mm
OPAT221
4.0 mm
OPAT241
5.5 mm
OPAT251
1.0 mm
OPAT212
2.5 mm
OPAT222
4.0 mm
OPAT242
5.5 mm
OPAT252
1.0 mm
OPAT213
2.5 mm
OPAT223
4.0 mm
OPAT243
5.5 mm
OPAT253
Straight 0°
7°
15°
23°
CH = 6 mm
GH
Pictures
NEW !
NEW !
NEW !
NEW !
PERMANENT ABUTMENTS IMPACTED WITH THE SAFE LOCK®
Components
Tip n°1 for straight
or 7° angulated abutments
Article number
OPIP100
Tip n°2 for angulated 15°
or 23° abutments
OPIP200
Tip n°3 specially designed for
impacting the cement-retained
crown onto the abutment
OPIP400
Pictures
5
IMPACTIONS
For a mastered and
calibrated impacting
with the SAFE LOCK®
34
Components
Implant-level impression taking
PROSTHETIC
PARTS
FOR AXIOM® 2.8
Abutment-level
impression-taking
Article number
Pop-in
transfer
OPPI028
Implant
analog
OPIA028
Abutment
transfer
OPTT028
Abutment
analog
OPAT028
PEEK protective cap
OPPC028
PMMA castable coping
OPCA028
TRY-IN ABUTMENTS FOR AXIOM® 2.8
w Medical titanium.
Angulation (ά)
Gingival height
(GH)
Article number
1.0 mm
OPAF210
2.5 mm
OPAF220
4.0 mm
OPAF240
5.5 mm
OPAF250
1.0 mm
OPAF211
2.5 mm
OPAF221
4.0 mm
OPAF241
5.5 mm
OPAF251
1.0 mm
OPAF212
2.5 mm
OPAF222
4.0 mm
OPAF242
5.5 mm
OPAF252
1.0 mm
OPAF213
2.5 mm
OPAF223
4.0 mm
OPAF243
5.5 mm
OPAF253
NEW !
Straight 0°
NEW !
7°
NEW !
15°
23°
NEW !
Pictures
Pictures
!
NEW N
DESIG
35
A
T H E
N E W
D I M E N S I O N
LIST OF MATERIALS (EXCEPTED SIMEDA® PROSTHESIS)
Composants
Matériaux
Implants Axiom® REG/PX/2.8
Healing screws, cover screws and other prosthetic screws
(Black Tite® prosthetic screws are DLC coated)
Analogs
(except LOCATOR® analog OPLA600)
Abutments and temporary copings
Reworkable abutments
Standard TITANIUM abutments
Grade V medical titanium
Aesthetic TITANIUM abutments
Straight and angulated conical abutments
Protective caps for conical abutment
Pacific bonding ring
LOCATOR® abutments
Pick-up and Pop-in transfers on implant or on conical abutment
Aesthetic ZIRCONIA abutments
CERAMICOR gold cast-on
abutments and copings
PIVOSYL gold cast-on
abutments and copings
Nitrided Grade V medical titanium
Zirconia 3Y-TZP
CÉRAMICOR: Au 60 % / Pd 20 % / Pt 19 % / Ir 1 %.
Melting interval: 1400°C – 1490°C.
Technical assistance: Cendres + métaux SA
Phone +41 58 360 20 00 - Fax +41 58 360 20 10
PIVOZYL : Au 8 % / Ag 37 % / Pt 25 % / Pd 30 %.
Melting interval: 1285°C – 1355°C.
Technical assistance: Cookson - Clal
Phone +33 (0)1 44 61 10 91 - Fax +33 (0)1 44 61 10 89
Protective caps for standard abutments
and for Axiom® 2.8 abutments
Axiom® 2.8 healing plug
PEEK
Axiom 2.8 cover plug
®
Axiom® 2.8 temporary abutments
Castable copings
LOCATOR® transfer and analog OPLA500 and OPLA600
Direct transfer on standard abutments (OPTT100)
and on Axiom® 2.8 abutments (OPTT028)
LOCATOR® retention replacement males
PMMA
Aluminium
Polycarbonate
Polyethylene and Nylon
A
simeda
®
customized
&
D
F
Photo Credits: Anthogyr - All rights reserved - Not contractual photos.
IMPLANTEO®a
C118B - 2012-12
E
solutions
2237 Avenue André Lasquin
74700 Sallanches - France
Phone +33 (0)4 50 58 02 37
Fax +33 (0)4 50 93 78 60
www.anthogyr.com