AK-105B
REV: A05-12-1001
A D VA N C E D K E Y S
Smart Keyless Entry +
Push Start Ignition System
USER MANUAL
Product Features:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
*
Smart Keyless Locking/Unlocking
Compact Sized Smart Keys
Dual-Antenna Setup
Bypass Transponder RFID Cards
Vehicle Anti-Theft Function
Ignition Controlled Lock / Unlock
Auto Vehicle Battery Power Saving
Door-Not-Closed Reminder
Locking-Delay Function
Push-Start Ignition Operation
OEM Toyota Push-Start Button
One-Touch Engine Tach Ignition
Remote Start Function
Optional Auto Window Closing
www.advancedkeys.com
support@advancedkeys.com
© Copyright Advanced Keys Inc. 2013. All Rights Reserved.
TABLE OF CONTENTS
Table Of Contents .............................................................................................................. 2
Important Notice .................................................................................................................. 2
Smart Key Remote Overview ............................................................................................2
System Functions Description ..........................................................................................3
...........................................................................................4
Remote Functions Description .........................................................................................5
Programmable Functions Summary.. ..............................................................................6
Push-start Ignition (Optional) ............................................................................................7
Push-start (Button) LED Description ..............................................................................7
References Information .......................................................................................................8
Warranty .........................................................................................................................8
FCC And Canadian Compliance .................................................................................8
IMPORTANT NOTICE
1. Do not leave the Smart Key in close proximity of electromagnetic devices such as mobile
phone, network device or microwave.
2. Do not apply any metallic cover or place Smart Key next to metallic material/surface.
3. Do not subject Smart Key to impact and bending force. If placed in a wallet or handbag ensure it
does not bend easily.
4. Do not leave the smart key in high temperatures for excessive periods of time, for instance, on the
dash or under direct sunlight.
5. Do not expose or submerge the Smart Key in liquid. If occurs, remove battery from Smart Key
immediately and dry circuit board for a few days prior to re-insert battery.
6. This system is susceptible to interference caused by heavy rain fall, high-voltage transmission
lines, cellular or broadcasting stations and other high-frequency electronic devices.
7. Do not modify, remove or disassemble the original system. If any unauthorized modifications are
made, the proper operation of the system cannot be guaranteed and warranty will be void.
ADVANCED KEYS
SMART KEY FUNCTIONS OVERVIEW
LED
Keychain Loop
2
© Copyright Advanced Keys Inc. 2013. All Rights Reserved.
Lock and Arm, Panic
Unlock and Disarm,
Trunk Release
Remote Start, AUX
SYSTEM FUNCTIONS DESCRIPTION
1. Smart Keyless Entry Function
Smart Keyless Entry function can be disabled for car wash, service, valet purposes.
To disable/enable this function: with door closed, switch Ignition to ACC, depress and hold brake
pedal then press and hold the REMOTE START
and LOCK
together for 2 seconds until horn
honks. Vehicle will honk once if function is enabled or twice if disabled. While the Smart Entry function
is disabled; the security indicator will flash Blue when armed.
Attention if the Smart Keyless Entry function is disabled:
• A valid Smart Key is still required and sensed within the proximity to disarm/start the vehicle.
Entering or starting vehicle without the Smart Key will set off the alarm function.
• Doors will not be locked or unlocked automatically when departing or approaching the vehicle.
Make sure to lock the door manually when departing from the vehicle.
2. Security / Alarm Function (Valet Mode)
The Security / Alarm function monitors the shock sensor, door switch, brake and ignition while system
is in armed state. If vehicle is violated system will sound horn (or siren if installed) and flash parking
lights for 30 seconds. However, ignition and starter function will be disabled until disarmed by a valid
Smart Key or a Bypass Transponder Card. Security indicator will flash Red rapidly upon disarm to
remind driver that the alarm function was triggered while driver was away. Alarm function can be
disabled if it is not required. To disable/enable this function: with door closed, switch Ignition to ACC
and press and hold the brake pedal then press and hold the REMOTE START
and UNLOCK
together for 2 seconds until horn honks. Vehicle will honk once if function is enabled or twice if
disabled. After alarm function is disabled; the security indicator will flash purple when armed.
Attention if the Security / Alarm function is disabled:
• Alarm will not sound when the shock sensor, door, ignition triggered.
• The Starter Kill Relay (if installed) or the Push-Start system will continue to function; therefore,
engine cannot be started without sensing a valid Smart Key.
3. Door Lock Delay Function
The Door Lock Delay function prevents unwanted automatic locking and unlocking of the door while
user frequently enter and exit the sensing range with Smart Keys. (i.e. unloading luggage, helping
passenger out or temporarily leaving the vehicle etc.) This function will disable the automatic locking
function for 5 minutes if any door opened during the first minute of the activation, or it will time out in
the first minute if all doors remain closed. The Door Lock Delay Function will delay system response to
the Door-Not-Closed-Reminder function, please ensure all doors are closed before leaving the vehicle.
Ways to Activate the Door Lock Delay function
• Press UNLOCK
to unlock the doors and activate the Door Lock Delay. Parking lights will flash
to indicate Smart Key Function is inactive. Press the UNLOCK
to extend the delay time.
• Before Starting the vehicle: Approach the vehicle with the Smart Key, once the vehicle disarmed
and unlocked, enter the vehicle and apply brake pedal 2x quickly.
• After turning the vehicle off: Turn ignition OFF and apply brake pedal 2x quickly.
Ways to Exit the Door Lock Delay function
• The Door Lock Delay function will time-out after 5 minutes if any door was opened during the first
minute of the activation, or it will time out in the first minute if all doors remain closed.
• Press LOCK
to exit Door Lock Delay Function.
• Apply and hold the brake pedal for more than 1 second.
Attention:
• If an extended period of time is needed to be in the close proximity to the vehicle for activities like
car wash / service / valet, it is suggested to disable the Smart Keyless Entry function temporarily.
• To disable/enable this function: with door closed, switch Ignition to ACC, apply the brake and
press LOCK
1x then press and hold REMOTE START
and UNLOCK
together for 2
seconds until horn honks. Vehicle will honk once if function is enabled or twice if disabled.
• Not recommended to disable the Door Lock Delay Function. Once UNLOCK
is triggered, the
Smart Key Function will be suspended and vehicle will not auto lock/unlock doors until LOCK
.
is triggered. In addition, parking lights will NOT flash to indicate Smart Key Function is inactive.
© Copyright Advanced Keys Inc. 2013. All Rights Reserved.
3
3. Ignition Controlled Door Lock/Unlock Function
Ignition lock function will automatically lock the doors when the brake is applied 10 seconds after
vehicle started. Doors will automatically unlock when the ignition is turned OFF. For security reason
the vehicle will not unlock if ignition is turned OFF in less than 2 minutes after turned ON. Follow the
Programmable Features instruction under the Smart Key Installation manual to disable/enable this
function.
4. Door-Not-Closed Reminder Function
Leaving Smart Key sensing range with the doors open or ajar will trigger the Door Not Closed
Reminder Function. Vehicle will double-chirp horn and flash parking lights 3 times to warn driver that
one or more doors are not closed. If doors remain open after the warning, system will lock the doors
regardless. Parking lights will continue to flash for additional two (2) minutes however, vehicle will be
armed and the engine start will be disabled.
To disable/enable this function: with door open, switch Ignition to ACC, depress and hold brake pedal
then press and hold the REMOTE START and UNLOCK
together for 2 seconds until horn
honks. Vehicle will honk once if function is enabled or twice if disabled.
5. Key-Not-Found Reminder Function
If vehicle door is open-then-closed while it’s running it will trigger system to search for the Smart Key
6 seconds after the brake is applied. Vehicle will do nothing if Smart Key is found. If Smart Key is not
located, vehicle will double-chirp the horn and flash the parking lights 3 times. This to remind the
current driver that the Smart Key is no longer detected and it needs to be present in the vehicle before
it is driven to another location. Without the Smart Key, once the vehicle is turned off it will not be able
to start again. However the bypass transponder could be used for START in this case.
To disable/enable this function: with door open, switch Ignition to ACC, depress and hold brake pedal
then press and hold the REMOTE START
and LOCK
together for 2 seconds until horn honks.
Vehicle will honk once if function is enabled or twice if disabled.
6. Shock Sensor or Manual Unlock Trigger Function
Any impacts, jostles to your car while armed will trigger the shock sensor to respond. Depending on
the severity of the shock, the system can react to a full shock by trigger the alarm function or it
responds to a lighter shock (30% of the strength of a full shock) and giving a warn-away alarm by
honk and flash parking lights 5 times. To acknowledge and stop a shock triggered alarm, approach
the vehicle with a Smart Key or press LOCK
or UNLOCK .
Optionally the shock sensor can be set to trigger the Unlock function instead of alarm function. In this
mode the Smart Key will NOT unlock doors automatically when Smart Key is in range and depending
on the shock sensor position and sensitivity, a light impact or tap on the vehicle will trigger the shock
sensor to unlock the doors while Smart Key is in the sensing range.
Note: By default the Shock Sensor will used for the alarm function and it’s disabled when vehicle is remote started.
To enable/disable this function: with door closed, switch Ignition to ACC, apply the brake and press
LOCK
2x then press and hold REMOTE START and UNLOCK
together for 2 seconds until
horn honks. Vehicle will honk once if function is enabled or twice if disabled.
7. Auxiliary Function
If applicable the REMOTE START
could be programmed to trigger an external function instead
remote start. Press and hold the REMOTE START
for 3 seconds to activate the AUX Function.
To disable/enable this function: with door closed, switch Ignition to ACC, apply the brake and press
LOCK 3x then press and hold REMOTE START
and UNLOCK
together for 2 seconds until
horn honks. Vehicle will honk once if function is enabled or twice if disabled.
8. Vehicle Battery Power Saver Function
System will reduce Smart Keys search frequency after 7 days of inactivity to conserve vehicle battery.
In this state, the Smart Key sensitivity will be reduced and it takes longer (8–10 seconds) to identify
the Smart Key or the Bypass Transponder Card. Press the UNLOCK
button once will also exit the
Power Saver mode.
9. Auto Windows Closing (Optional Module)
If window closer module is installed, windows and sunroof left open will be closed in sequenced when
vehicle is armed / locked.
4
© Copyright Advanced Keys Inc. 2013. All Rights Reserved.
REMOTE FUNCTIONS DESCRIPTION
1. Proximity Unlock / Disarm
Approach the vehicle and when Smart Key enters the sensing range, system will disarm and unlock
the doors immediately. Parking lights and horn/siren (if enabled) will flash and sound 2x. The status
indicator light will flash BLUE to indicate system is disarmed.
2. Proximity Lock / Arm
Walk away from the vehicle and after Smart Key exits the sensing range, system will arm and lock the
doors immediately. Parking lights and horn/siren (if enabled) will flash 3x and sound 1x. The status
indicator light will flash BLUE and RED alternatingly to indicate system is armed.
3. Remote Unlock / Disarm
Press and hold the UNLOCK
for 1 second to manually disarm and unlock the doors. Parking lights
will begin to flash, indicating the lock delay function is active. See Door Lock Delay Function under the
System Functions description for more info.
4. Remote Lock / Arm
While Smart Key is outside the proximity sensing range: Press and hold the LOCK
for 1 second to
manually lock the doors and arm the vehicle.
While Smart Key is inside the proximity sensing range: Press and hold the LOCK
for 3 seconds to
overwrite Smart Key function and manually lock the doors. Caution: Doors will not be opened until Smart
Key exit and re-enter the sensing range, do not leave smart keys inside vehicle when closing doors.
5. Bypass Transponder Card Unlock / Disarm
Bypass Transponder Cards (or bypass cards) provide an alternative method to gain access and
starting the vehicle. It’s useful in the event when Smart Key became lost, damaged, battery depleted,
submerged in liquid, interfered by strong electromagnetic or any other instance that the system failed
to identify the Smart Key.
Place one of the bypass card next to the bypass antenna for 5 seconds to disarm, unlock doors and
enable the Push-Start Ignition system (if installed). Once the bypass card is removed from the bypass
antenna, system will lock and arm after 10 seconds. User must enter and start the vehicle within this
10-second window to avoid trip alarm function. If longer disarm time is required; leave the bypass card
over the bypass antenna to disarm continuously.
6. Remote Trunk Release
To release trunk, press and hold the UNLOCK
for 3 seconds. Please note the system will unlock
and disarm the vehicle before release the trunk. Make sure to arm and close the trunk when done.
7. Panic Function
While the Smart Key is outside the proximity sensing range; press and hold the LOCK
for 3
seconds to activate Panic Function. Parking lights will flash and horn/siren (if function enabled) will
sound for 30 seconds. If the vehicle was remotely started, the engine will shutdown immediately.
Press LOCK
or UNLOCK
to exit the Panic Function.
8. Remote Start (Optional AK-PSBXX series Push-Start Ignition Module Installed)
While the Smart Key is outside the proximity sensing range; press and hold the REMOTE START
for 3 seconds. The parking lights will flash once to indicate remote start signal received. After 5
seconds delay, the Push-Start Ignition system will attempt to start the engine. If your vehicle does not
start at the first attempt (i.e. Cold engine start) it will attempt to start the engine up to three times.
Remote start session will last 15-minutes and parking lights and will remain ON during this period.
Note: Press and hold the REMOTE START
for 3 seconds to shutdown the remote start. For diesel vehicle there
will be a delay if the vehicle’s Wait-to-Start Light is ON. After 18 seconds expires, system will proceed to start the
engine regardless.
9. Remote Start Ignition Take Over
After vehicle is remote started, use the follow steps to takeover ignition without restarting the engine:
1. Approach the running vehicle with a valid Smart Key to disarm and unlock doors.
2. Enter the vehicle and without stepping on the brake, press the Push-Start button once.
3. Step on the brake to exit Remote Start mode. (Push Start Button’s status LED turns OFF and
backlight stays ON) Vehicle is now safe to take out of the Park to drive.
© Copyright Advanced Keys Inc. 2013. All Rights Reserved.
5
PROGRAMMABLE FUNCTIONS SUMMARY
Brake must be applied when program:
Function
Default
Door
Function Select
Enable / Disable
Security Alarm Function
Enabled
Closed
-
Press UNLOCK + RS
Smart Key Entry Function
Enabled
Closed
-
Press
Door-Not-Closed Reminder
Enabled
Open
-
Press UNLOCK + RS
Key-Not-Found Reminder
Enabled
Open
-
Press
Door Lock Delay Function
Enabled
Closed
Press LOCK x1
Press UNLOCK + RS
External Unlock Trigger
Disabled
Closed
Press LOCK x2
Press UNLOCK + RS
RS Button as AUX Trigger
Disabled
Closed
Press LOCK x3
Press UNLOCK + RS
LOCK + RS
LOCK + RS
SECURITY LED LIGHT DESCRIPTION
In Armed State (Smart Key Not Detected):
LED Color and Sequence
Description
Blue – Red – Blue
Smart Keyless Entry Function Enabled
Blue – Blue
Smart Keyless Entry Function Disabled
Red – Red (Slow)
Alarm Activated Record
Red – Red (Fast)
Alarming
Purple
Alarm Function Disabled
All OFF
Smart Keyless Entry and Alarm Functions Disabled
In Disarmed State (Smart Key Detected):
LED Color and Sequence
Description
Blue – Red (Slow)
Door Lock Delay Mode Active
Blue – Blue (Slow)
Valid Smart Key Detected
Blue – Blue (Fast)
Smart Key Sense Delay After Ignition OFF
Red – Red (Fast)
Alarm Activated Record
SMART KEY BATTERY
Saving Key’s Battery Power
Communication is constant between the control unit and Smart Key while in sensing range.
We suggest the following methods to conserve and prolong the Smart Key’s battery power:
• Do not leave the Smart Key inside the vehicle when vehicle is OFF.
• Switch to ACC/ON when staying in vehicle for extended periods of time.
Replacing the Battery
• Require one CR2032 lithium-ion battery
• Make sure the battery is inserted with the correct polarity.
• Use dry hands and ensure there is no debris in the battery compartment.
• Do not curve and avoid touching the PCB board when inserting the battery.
• Test the Smart Key after the battery replacement. No additional programming required.
6
© Copyright Advanced Keys Inc. 2013. All Rights Reserved.
PUSH-START IGNITION (OPTIONAL)
If installed, the Push-Start Ignition system will be enabled when a
valid Smart Key is detected. The “ENGINE START STOP” button
backlight will be illuminated and Status LED showing a solid
amber light indicating vehicle is ready for ignition.
Status LED
Backlight
Following shows the operations of the Push-Start system:
Switching Ignition States
When system is in Ready mode (Status LED is Amber) and
without apply brake:
 Press button 1st time: ACC (Status LED: Green)
 Press button 2nd time: ON (Status LED: Flashing Green)
 Press button 3rd time: Ready (Status LED: Amber)
To Start the Engine
Apply brake and when the Status LED starts to flash Red:
 Tach: Tap button once to start engine automatically.
 Tachless: Press and hold the button until engine started.
Note: You may start the engine from any ignition state.
Emergency Ignition: (Without Brake) Press and hold Start
Button for 1.5 seconds to start the engine.
To Stop the Engine
Make sure the vehicle is stopped and in Parked (P) position
Apply brake and press and hold the button for 0.5 seconds
until the engine stops.
Emergency Stop: (Without Brake) Press and hold Start
Button for 3 seconds to stop the engine.
WARNING
• DO NOT PRESS THE PUSH-START BUTTON WHILE VEHICLE IS IN MOTION.
• To stop ignition in an emergency situation always change gear to Neutral first
then press and hold the Push-Start button for 3 seconds.
• When exposed to direct sunlight the Push-Start button maybe hot to touch.
PUSH-START (BUTTON) LED DESCRIPTION
Status LED
Backlight
Description
OFF
OFF
Push-Start Ignition Disabled / Engine Starting
Amber
ON
Push-Start Ignition Enabled
Red (flashing)
ON
Ready to Start Engine
Green
ON
Accessory (ACC) State
Green (flashing)
ON
Ignition (ON) State
OFF
ON
Ignition (RUN) State
Green – Red (flashing)
ON
System Initializing / Tach Programming Mode
© Copyright Advanced Keys Inc. 2013. All Rights Reserved.
7