Eizo FlexScan SX3031W-H User`s manual

CONTENTS
Chapter 1 Features and Overview
1-1 Features
1-2 Buttons and Indicators
1-3 Functions and Basic Operation
Chapter 2 Settings and Adjustments
2-1 Utility Disk
2-2 Display Mode Selection
2-3 Color Adjustment
Important
2-4 Off Timer/Power Saving Settings
2-5 Screen Size Selection
2-6 Power Indicator/EIZO Logo Display Settings
Please read PRECAUTIONS, this User’s
Manual and Setup Manual (separate volume)
carefully to familiarize yourself with safe and
effective usage.
Please retain this manual for future reference.
2-7 Locking Buttons
2-8 Setting Adjustment Menu Display
2-9 Setting Orientation
2-10 Viewing Information/Setting Language
2-11 Beeper Setting
2-12 Selecting Input Signal
2-13 Resumption of Default Setting
Chapter 3 Connecting Cables
The latest User’s Manual is available for
download from our site:
http://www.eizo.com
3-1 Connecting Peripheral USB Devices
Chapter 4 Troubleshooting
Chapter 5 Reference
5-1 Attaching an Arm
5-2 Cleaning
5-3 Specifications
5-4 Glossary
How to Setup
Please read the Setup Manual (separate volume)
Product specification may vary with sales areas.
Confirm the specification in the manual written in language of the region of purchase.
Copyright© 2007-2010 EIZO NANAO CORPORATION All rights reserved.
No part of this manual may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means,
electronic, mechanical, or otherwise, without the prior written permission of EIZO NANAO CORPORATION.
EIZO NANAO CORPORATION is under no obligation to hold any submitted material or information confidential
unless prior arrangements are made pursuant to EIZO NANAO CORPORATION’s receipt of said information.
Although every effort has been made to ensure that this manual provides up-to-date information, please note that EIZO
monitor specifications are subject to change without notice.
Apple and Macintosh are registered trademarks of Apple Inc.
VGA is a registered trademark of International Business Machines Corporation.
VESA is a registered trademark of Video Electronics Standards Association.
Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and other countries.
EIZO, EIZO Logo, FlexScan, i•Sound and ScreenManager are registered trademarks of EIZO NANAO CORPORATION in Japan and
other countries.
All other trademarks are the properties of their respective owners.
Notice for this monitor
In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in
lower brightness is recommended.
The LCD panel is manufactured using high-precision technology. However, missing pixels or lit pixels may appear on
the LCD panel, this is not malfunction.
Percentage of effective pixels: 99.9994% or higher.
The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact
your dealer.
Do not press on the panel or edge of the frame strongly, as this may result in the display malfunction, such as the
interference patterns, etc. If pressure is continually applied to the LCD panel, it may deteriorate or damage your LCD
panel. (If the pressure marks remain on the LCD panel, leave the monitor with a white or black screen. The symptom
may disappear.)
Do not scratch or press on the panel with any sharp objects, such as a pencil or pen as this may result in damage to the
panel. Do not attempt to brush with tissues as this may scratch the LCD panel.
When the screen image is changed after displaying the same image for extended periods of time, an afterimage may
appear. Use the screen saver or timer to avoid displaying the same image for extended periods of time.
When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation
may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until dew condensation
disappears, otherwise it may cause damage to the monitor.
To use the monitor comfortably
An excessively dark or bright screen may affect your eyes. Adjust the brightness of the monitor according to the
environmental conditions.
Staring at the monitor for a long time tires your eyes. Take a 10-minute rest every hour.
CONTENTS
Notice for this monitor............................................... 1
To use the monitor comfortably................................ 1
2-8 Setting Adjustment Menu Display................. 13
● To update menu settings
[Menu Size/Menu Position/Menu Off Timer/
Translucent]....................................................... 13
Chapter 1 Features and Overview...................... 3
2-9 Setting Orientation......................................... 14
1-1 Features............................................................. 3
● To set the orientation of the Adjustment menu
[Orientation]....................................................... 14
1-2 Buttons and Indicators..................................... 3
2-10 Viewing Information/Setting Language........ 14
1-3 Functions and Basic Operation....................... 4
● To check settings, usage time, etc.
[Information]...................................................... 14
Chapter 2 Settings and Adjustments................. 6
● To set a language to be displayed
[Language]........................................................ 14
2-1 Utility Disk......................................................... 6
● Disk contents and software overview.................. 6
2-11 Beeper Setting................................................ 15
● To use ScreenManager Pro for LCD................... 6
● To set the beeper [Beep]................................... 15
2-2 Display Mode Selection.................................... 6
2-12 Selecting Input Signal ................................... 15
● To choose Dual Display [Display Setup].............. 6
● To select input signal [Input Signal]................... 15
2-3 Color Adjustment.............................................. 7
2-13 Resumption of Default Setting...................... 16
Simple Adjustment [FineContrast Mode]............. 7
● To reset color adjustment [Reset]...................... 16
● FineContrast mode.............................................. 7
● To reset all settings [Reset]............................... 16
● To select FineContrast mode............................... 7
● To update color setting of FineContrast mode..... 7
Chapter 3 Connecting Cables........................... 17
Advanced Adjustments [Adjustment Menu]........ 8
● To select an appropriate mode for images.......... 8
3-1 Connecting Peripheral USB Devices............ 17
● To set/adjust color............................................... 9
Chapter 4 Troubleshooting................................ 18
2-4 Off Timer/Power Saving Settings.................. 10
● To set monitor power-off time [Off Timer].......... 10
● To set monitor power-saving [DVI DMPM]........ 10
2-5 Screen Size Selection......................................11
● To change screen size [Screen Size].................11
● To adjust brightness of non-display area
[Border Intensity]................................................11
Chapter 5 Reference.......................................... 20
5-1 Attaching an Arm............................................ 20
5-2 Cleaning........................................................... 20
5-3 Specifications................................................. 21
● To modify blurred characters/lines
[Smoothing]........................................................11
2-6 Power Indicator/EIZO Logo Display Settings12
● To turn off the Power indicator while a screen is
displayed [Power Indicator]............................... 12
● To display EIZO logo
[EIZO Logo Appearing Function]....................... 12
2-7 Locking Buttons............................................. 12
● To lock operation [Adjustment Lock].................. 12
CONTENTS
5-4 Glossary.......................................................... 24
Chapter 1 Features and Overview
Thank you very much for choosing an EIZO color LCD monitor.
1-1 Features
• 29.8 inch class wide screen format LCD
• WQXGA (2560 × 1600) display compliant (SIGNAL1)
• HDCP signal (SIGNAL2) compliant
• Dual-display compliant by introducing dual-input system (DVI-D × 2
connectors)
• DVI digital input (TMDS) compliant
• Horizontal scan frequency:31 - 100 kHz
• Vertical scan frequency: 59 - 61 Hz (VGA TEXT: 69 - 71 Hz)
• Resolution:
2560 dots × 1600 lines
• Compatible with frame synchronization mode (59 - 61 Hz)
• Portrait/Landscape display available (rotate 90 degrees clockwise)
• Smoothing (soft - sharp) function
• FineContrast mode to allow the best mode for screen display
• The utility software “ScreenManager Pro for LCD” (for Windows) to control
the monitor from a PC with mouse/keyboard is included (refer to the EIZO
LCD Utility Disk).
1-2 Buttons and Indicators
NOTE
• This monitor supports the Portrait/
Landscape display. This function
allows you to change the orientation
of the Adjustment menu when using
the monitor screen in vertical display
position. (Refer to “2-9 Setting
Orientation” on page 14.)
• If you use the monitor with “Portrait”
position, the setting may be required
to change depending on the graphics
board used in your PC. Refer to the
manual of the graphics board for
details.
Adjustment menu (*ScreenManager ® )
Buttons
1.
2.
3.
4.
5.
6.
NOTE
Input signal selection button
Mode button
Enter button
Control buttons (Left, Down, Up, Right)
Power button
Power indicator
Indicator status
Operation status
Blue
The screen is displayed
Orange
Power saving
Off
* ScreenManager
• While the screen is displayed, the
blue power indicator that is lighting
blue can be turned off (see “To turn
off the Power indicator while a screen
is displayed [Power Indicator]” on
page 12).
• For the power indicator status with
“Off Timer” set, refer to “To set
monitor power-off time [Off Timer]”
on page 10.
Power off
®
is an EIZO’s nickname of the Adjustment menu.
Chapter 1 Features and Overview
1-3 Functions and Basic Operation
To adjust the screen and color
Main menu (Refer to page 5 for operation)
Screen Adjustment
Page 11
● To modify blurred characters/lines
[Smoothing]
• The Adjustment menu and the FineContrast menu cannot
be displayed at the same time.
-/$%
FineContrast menu
Color adjustment
Simple adjustment [FineContrast mode]
Color Adjustment
Advanced Adjustment
Page 8
Page 7
This function allows easy selection of a desired mode
from five modes according to monitor application.
● “Brightness,” “Temperature,” “Gamma,”
“Saturation,” “Hue,” “Gain,” and “6 Colors” can be
set for each mode (Custom/sRGB/Text/Picture/
Movie).
Settable functions vary with the display mode.
Resumption of Default Setting
● To reset color adjustment [Reset]…… see page 16
● After selecting the adjustment item by
and
,
select values by
and
.
● “Brightness,” “Temperature,” and “Gamma” can be set
for each mode (Custom/sRGB/Text/Picture/Movie).
Settable functions vary with the display mode.
Brightness adjustment
Press
or
to adjust brightness.
Chapter 1 Features and Overview
To make useful settings/adjustments
Adjustment menu (Refer to below for operation)
Power Saving Setting
Page 10
● To set monitor power-saving [DVI DMPM]
Viewing Information
Screen Size Selection
● To change screen size
[Screen Size] … ……………………… see page 11
● To adjust brightness of non-display area
[Border Intensity]……………………… see page 11
Page 14
● To check settings, usage time, etc. [Information]
Setting Language
Page 14
Selecting Input Signal
● To select input signal
[Input Signal]…………………………… see page 15
Orientation Setting
● To set the orientation of the Adjustment menu
[Orientation]… ………………………… see page 14
● To set a language to be displayed [Language]
Off Timer Setting
● To set monitor power-off time
[Off Timer] … ………………………… see page 10
Beeper setting
● To set the beeper [Beep]……………… see page 15
EIZO Logo Display Setting
● To display EIZO logo [EIZO Logo Appearing
Function]… ………………………… see page 12
Setting Adjustment Menu Display
● To update menu settings [Menu Size/Menu Position/
Menu Off Timer/Translucent]…………… see page 13
Locking Buttons
● To lock operation
[Adjustment Lock]… ……………… see page 12
Power Indicator Setting
● To turn off the Power indicator while a screen is
displayed
[Power Indicator]… …………………… see page 12
Display Mode Selection
● To choose Dual Display
[Display Setup]………………………… see page 6
Resumption of Default Setting
● To reset all settings [Reset]…………… see page 16
Basic operation of Adjustment menu
[Displaying Adjustment menu and selecting function]
(1) Press
. The Main menu appears.
/
/
/
, and press
. The Sub menu appears.
(2) Select a function with
/
/
/
, and press
. The adjustment/setting menu appears.
(3) Select a function with
(4) Adjust the selected item with
/
/
/
, and press
. The setting is saved.
[Exiting Adjustment menu]
(1) Choose <Return> from the Sub menu and press
(2) Choose <Exit> from the Main menu and press
. The Main menu appears.
. The Adjustment menu quits.
NOTE
• The Adjustment menu can also be exited by pressing
twice quickly.
• <Exit> or <Return> can also be selected by pressing
twice in the Main menu or Sub menu.
Chapter 1 Features and Overview
Chapter 2 Settings and Adjustments
2-1 Utility Disk
An “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the disk contents and
the overview of the application software programs.
● Disk contents and software overview
The disk includes color profiles, application software programs for adjustment, and User’s Manual. Refer to “Readme.
txt” or the “read me” file on the disk for software startup procedures or file access procedures.
Item
Overview
A “Readme.txt” or “read me” file
Color Profiles (ICC Profiles)
A specific file including the color
characteristic information for the
monitor.
ScreenManager Pro for LCD (for
Windows)
A utility software program to control
monitor adjustments from a PC using
its mouse and keyboard.
(A PC must be connected to the
monitor with the supplied USB cable.)
Refer to the description later.
WindowMovie Checker Software
WindowMovie is a function of
ScreenManager Pro for LCD.
For more information, refer to the
User’s Manual of ScreenManager Pro
for LCD on the disk.
For Windows
For Macintosh
√
√
√
√
√
−
User’s Manual of this monitor (PDF file)
● To use ScreenManager Pro for LCD
For the installation and use of ScreenManager Pro for LCD, refer to its User’s Manual on the disk.
To adjust the monitor using ScreenManager Pro for LCD, connect a PC to the monitor with the supplied USB cable. For details, refer to Chapter 3 Connecting Cables, item 3-1 Connecting Peripheral USB Devices (page 17).
2-2 Display Mode Selection
● To choose Dual Display [Display Setup]
(1) Check that the monitor and the PC are powered off.
and
simultaneously to display the Display Setup menu.
(2) Press
Single Display: Press [Single Display].
Dual Display: Press [Dual Display].
(3) Press
.
(4) Turn on the PC.
The display appears on the screen.
Attention
• Default setting: Single Display
Chapter 2 Settings and Adjustments
2-3 Color Adjustment
Simple Adjustment [FineContrast Mode]
This function allows you to select the best display mode for monitor brightness,
etc.
● FineContrast mode
An appropriate display mode is selectable out of five modes.
Mode
Purpose
Custom
Available for making desired setting.
sRGB
Suitable for color matching with sRGB compatible
peripherals.
Text
Suitable for displaying texts for word processing or
spreadsheets.
Picture
Suitable for displaying images such as photos or picture
images.
Movie
Suitable for playing back animated images.
FineContrast menu
Example) Custom
Displays current mode.
Displays current settings of brightness, color
temperature, and gamma.
● To select FineContrast mode
(1) Press
-/$%
NOTE
• The Adjustment menu and the
FineContrast menu cannot be
displayed at the same time.
.
The fine contrast mode changes at every time pressing
(2) Choose desired mode and press
-/$%
.
.
The setting completes.
● To update color setting of FineContrast mode
Attention
<Brightness>, <Temperature>, and <Gamma> can be set or adjusted.
(1) Choose a desired function from the FineContrast menu with
(2) Adjust the selected function with
or
, and press
.
The adjustment is completed.
or
.
• Color temperature values and gamma
values are fixed in some modes.
Set them as shown in “To select an
appropriate mode for images” on page
8.
NOTE
• The <Color> menu of the Adjustment
menu allows advanced color
adjustments for each mode. Refer to
“To select an appropriate mode for
images” on page 8.
Chapter 2 Settings and Adjustments
Attention
Advanced Adjustments [Adjustment Menu]
Independent setting and saving of color adjustment are available for each
FineContrast mode.
● To select an appropriate mode for images
√ : Adjustment available −: Invalid for adjustment
Icon
Function
FineContrast mode
Custom
sRGB
Text
Picture
Movie
Brightness
*
√
√
√
√
√
Temperature
*
√
−
√
√
√
Gamma
*
√
−
√
−
−
Saturation
√
−
√
√
√
Hue
√
−
√
√
√
Gain
√
−
−
−
−
6 Colors
√
−
−
−
−
Reset
√
√
√
√
√
• The FineContrast mode cannot be
changed during color adjustment. Set
the FineContrast mode in advance
with -/$% .
• Wait 30 minutes or more from
monitor power on before starting the
color adjustment.
• Choose <Reset> in the <Color> menu
to revert to the default settings (factory
settings) of hue of the color mode
selected.
• The same image may be seen in
different colors on multiple monitors
due to their monitor-specific
characteristics. Make fine color
adjustment visually when matching
colors on multiple monitors.
*These items can also be set or adjusted with the FineContrast menu.
Menu
Brightness
Description
To adjust the full screen
brightness as desired
Adjustment range
0 to 100%
NOTE
• You can also adjust the brightness by pressing
or
button while the adjustment menu is not displayed. Press
after adjustment.
• The values shown in the “%” are available only as reference.
Temperature To select a color
temperature
4000K to 10000K in units of 500K
(including 9300K).
NOTE
• Setting the value to “Off” presents the natural color
temperature of the panel.
• The values shown in the Kelvin (K) are available only as
reference.
Gamma
To set a gamma value
1.4 to 3.0, Fixed
NOTE
• Only when selecting <Custom> in the fine contrast mode,
“Fixed” is available.
Saturation
To adjust color saturation
–100 to 100
Setting the minimum (–100) turns
the image to a monochrome
screen.
Attention
• This function does not enable to display every color gradation.
Hue
To produce a desired skin
color, etc.
–100 to 100
Attention
• This function does not enable to display every color gradation.
Chapter 2 Settings and Adjustments
NOTE
• The Adjustment menu and the
FineContrast menu cannot be
displayed at the same time.
• Adjustable functions vary depending
on the type of FineContrast mode.
Menu
Gain
Description
Adjustment range
To adjust red, green, and
0 to 100%
blue to a desired color tone Adjust the respective brightness of
respectively
red/green/blue to make a desired
color tone. Display an image with
white or gray background for
adjustment.
NOTE
• The values shown in the “%” are available only as reference.
• When using the <Gain> setting, the <Temperature> setting is
set to “Off.”
6 Colors
Reset
To adjust <Hue> and
<Saturation> in Red,
Yellow, Green, Cyan, Blue,
and Magenta respectively
Hue: –100 to 100
Saturation: –100 to 100
To reset the color settings of the selected FineContrast mode to
the default settings
● To set/adjust color
(1) Choose <Color> from the Adjustment menu, and press
.
(2) Select a desired function from the <Color> menu, and press
.
The selected function menu appears.
(3) Adjust the selected item with
/
/
/
, and press
.
The adjustment is completed.
Chapter 2 Settings and Adjustments
2-4 Off Timer/Power Saving Settings
● To set monitor power-off time [Off Timer]
This function allows the monitor to automatically turn off after a specified time
has passed. This function serves to reduce afterimages caused when the monitor
screen is left on for a long time period without use. Use this function when an
image is displayed throughout the day.
Attention
• The Off Timer functions even in the
power saving mode, but the advance
notice is disabled. The monitor power
is turned off without advance notice.
[Off Timer System]
Timer
ON time (1H - 23H)
Monitor
Power Indicator
Operating
Blue
Last 15 min. in “ON time” Advance Notice*
Flashing blue
“ON time” expired
Off
Power Off
* When
is pressed during the advance notice period, the monitor continues to operate for
additional 90 minutes. Extension of operation time can be set without limitation.
[Procedure]
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Off Timer> from the <Others> menu, and press
.
.
The <Off Timer> menu appears.
(3) Select “Enable” with
or
.
(4) Set a monitor ON time (1 to 23 hours) with
or
, and press
.
The Off Timer setting is completed.
[Resumption Procedure]
• Press
.
● To set monitor power-saving [DVI DMPM]
Attention
This monitor complies with the DVI DMPM standard.
[Power Saving System]
The monitor enters the power saving mode in five seconds in connection with
the PC setting.
PC
Operating
Power saving
Monitor
Operating
Power saving
Power Indicator
Blue
Orange
[Procedure]
(1) Choose <PowerManager> from the Adjustment menu, and press
The <Set> menu appears.
(2) Select “DVI DMPM” with
or
, and press
.
The power saving setting is completed.
[Resumption Procedure]
• Operate the mouse or keyboard to resume the normal screen.
10
Chapter 2 Settings and Adjustments
.
• Unplugging the power cord
completely shuts off power supply to
the monitor.
• USB compliant devices connected
to the monitor work even if the
monitor is in the power saving mode.
Therefore, power consumption of the
monitor varies with connected devices
even in the power saving mode.
2-5 Screen Size Selection
● To change screen size [Screen Size]
The image with the resolution other than the recommended resolution is
displayed in full screen automatically. You can change the screen size by using
<Screen Size> from <Others> menu.
Menu
Function
Full Screen
(default setting)
Displays an image in full screen. Images are distorted in
some cases because the vertical rate is not equal to the
horizontal rate.
Enlarged
Displays an image in full screen. In some cases, a blank
horizontal or vertical border appears to equalize the
vertical rate and the horizontal rate.
Normal
Displays images with the specified resolution.
Example: Image size 1280 × 1024 when setting <Single Display> in <Display
Setup>.
Full Screen
(Default setting)
Enlarged
Normal
(2560×1600)
(2000×1600)
(1280×1024)
[Procedure]
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Screen Size> from the <Others> menu, and press
.
The screen size setting window appears.
(3) Select “Full Screen,” “Enlarged,” or “Normal” with
.
or
, and press
The screen size setting is completed.
● To adjust brightness of non-display area [Border Intensity]
A border (black area with no image) around the image appears in the “Normal”
or “Enlarged” mode.
Border
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Border Intensity> from the <Others> menu, and press
.
The <Border Intensity> menu appears.
(3) Adjust border intensity with
or
, and press
.
The border intensity adjustment is completed.
Attention
● To modify blurred characters/lines [Smoothing]
When a low-resolution image is displayed in the “Full Screen” or “Enlarged”
mode, the characters or lines of the displayed image may be blurred.
• Smoothing setting may not be required
depending on the display resolution.
(You cannot choose the smoothing
icon.)
.
(1) Choose <Screen> from the Adjustment menu, and press
(2) Choose <Smoothing> from the <Screen> menu, and press
.
The <Smoothing> menu appears.
(3) Select a suitable level from 1 to 5 (where 1 = soft and 5 = sharp) with
or
, and press
.
The smoothing adjustment is completed.
Chapter 2 Settings and Adjustments
11
2-6 Power Indicator/EIZO Logo Display
Settings
● To turn off the Power indicator while a screen is displayed
[Power Indicator]
NOTE
• The Power indicator lights up at
power on with the default setting.
This function enables to turn off the Power indicator (blue) while a screen is
displayed.
.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Power Indicator> from the <Others> menu, and press
.
The <Power Indicator> menu appears.
(3) Select “Disable” with
or
, and press
.
The Power Indicator setting is completed.
● To display EIZO logo [EIZO Logo Appearing Function]
When this unit is turned on, the EIZO logo appears at the center of the screen.
Selection to display or not to display the logo is available with this function.
(1) Press
(2) Press
to turn off the unit.
again while pressing
to turn on the unit.
The EIZO Logo display/non-display function is toggled.
2-7 Locking Buttons
● To lock operation [Adjustment Lock]
This function locks the buttons to retain the status adjusted or set once.
Buttons that can be
locked
•
Buttons that cannot
be locked
(Mode button) FineContrast mode selection/
adjustment
•
/
Brightness adjustment using control buttons
•
(Input Signal Selection button),
(Mode button),
(Power button).
•
(Enter button) Adjustments/settings using
Adjustment menu
-/$%
-/$%
(1) Press
(2) Press
to turn off the unit.
again while pressing
-/$%
.
The screen is displayed with the adjustment lock.
[Unlocking]
(1) Press
to turn off the unit.
(2) Press
again while pressing
-/$%
.
The screen is displayed with the adjustment lock released.
12
Chapter 2 Settings and Adjustments
NOTE
• The logo appears with the default
setting.
2-8 Setting Adjustment Menu Display
● To update menu settings [Menu Size/Menu Position/Menu
Off Timer/Translucent]
Menu Size
Change the Adjustment menu size using the following procedure.
.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Menu Settings> from the <Others> menu, and press
.
(3) Choose <Menu Size> from the <Menu Settings> menu, and press
.
The <Menu Size> menu appears.
(4) Select “Normal” or “Enlarged” with
or
, and press
.
The menu size setting is completed.
Menu Position
Adjust the menu position using the following procedure.
.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Menu Settings> from the <Others> menu, and press
.
(3) Choose <Menu Position> from the <Menu Settings> menu, and press
.
The <Menu Position> menu appears.
(4) Select a menu position with
/
/
/
, and press
.
The menu position setting is completed.
Menu Off Timer
Set the menu display time using the following procedure.
.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Menu Settings> from the <Others> menu, and press
.
(3) Choose <Menu Off Timer> from the <Menu Settings> menu, and press
.
The <Menu Off Timer> menu appears.
(4) Select “Enable” with
or
.
(5) Choose an Off Time (15/30/45/60 seconds) with
or
, and press
.
The menu off timer setting is completed.
Translucent
Set the transparency for menu display using the following procedure.
.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Menu Settings> from the <Others> menu, and press
.
(3) Choose <Translucent> from the <Menu Settings> menu, and press
.
The <Translucent> menu appears.
(4) Adjust the transparency for menu display with
or
, and press
.
The transparency setting is completed.
Chapter 2 Settings and Adjustments
13
2-9 Setting Orientation
● To set the orientation of the Adjustment menu [Orientation]
This function allows you to change the orientation of the Adjustment menu
when using the monitor screen in vertical display position.
.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Menu Settings> from the <Others> menu, and press
.
(3) Choose <Orientation> from the <Menu Settings> menu, and press
.
The <Orientation> menu appears.
(4) Select “Portrait” with
or
, and press
NOTE
• If you use the monitor with “Portrait”
position, the setting may be required
to change depending on the graphics
board used in your PC. Refer to the
manual of the graphics board for
details.
Attention
• Be sure to turn the monitor screen
after pulling up the screen to the
uppermost position of the stand and
setting the screen tilted upward.
.
The orientation setting is completed.
(5) Turn the monitor screen 90° in clockwise direction.
2-10 Viewing Information/Setting Language
● To check settings, usage time, etc. [Information]
NOTE
This function allows you to check settings, model name, serial number, display
mode (see page 6), and usage time of the monitor.
.
(1) Choose <Information> from the Adjustment menu, and press
Attention
The <Information> menu appears.
(2) Then, press
• The information is displayed in the
following order; settings, SIGNAL1,
SIGNAL2 display mode (see page 6)
and model name, serial No, and usage
time of the monitor.
to check settings, etc.
● To set a language to be displayed [Language]
Select the Adjustment menu language.
Selectable languages
English/German/French/Spanish/Italian/Swedish/Simplified Chinese/
Traditional Chinese/Japanese
(1) Choose <Language> menu from the Adjustment menu, and press
The <Language> menu appears.
(2) Choose a language with
/
/
The language setting is completed.
14
• The usage time is not always “0”
when you purchase the monitor due
to factory inspection.
Chapter 2 Settings and Adjustments
/
, and press
.
.
2-11 Beeper Setting
● To set the beeper [Beep]
Set the beeper on/off for operation tone of the switches, connection error, etc.
Sound type
Conditions for beeping
Short beep
• When
is pressed.
• When an item is selected with
.
• When a maximum or minimum value is set with
the control switches.
• When
is pressed.
Long beep
• When registration is performed with
Consecutive beeps
•
•
•
•
Beep-beep once every 15
seconds
• 15 minutes before the power off time set by “Off
Timer” (advance notice time)
-/$%
.
When the monitor is not connected correctly.
When the PC is not turned on.
When no signal is received.
When a frequency out of the specified range is
received.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Beep> from the <Others> menu, and press
.
.
The <Beep> menu appears.
(3) Select “On” or “Off” with
or
, and press
.
The beep setting is completed.
2-12 Selecting Input Signal
● To select input signal [Input Signal]
NOTE
In single display mode, this function allows you to select the signal displayed
on the monitor.
Priority setting
Function
Auto
When either PC is turned off or enters the powersaving mode, the monitor automatically displays
signals of another PC.
Manual
The monitor does not detect the PC’s signals
automatically. Select an active input signal with
(1) Choose <Others> from the Adjustment menu, and press
.
(2) Choose <Input Signal> from the <Others> menu, and press
• When the input signal setting is
“Auto” in single display mode, if
no input signal is received on both
SIGNAL1 and SIGNAL2 port, the
signal port selecting function is
performed at every two seconds.
.
.
The <Input Signal> menu appears.
(3) Choose <Auto/Manual> with
or
, and press
.
Chapter 2 Settings and Adjustments
15
2-13 Resumption of Default Setting
● To reset color adjustment [Reset]
NOTE
The hue in the color mode currently set will revert to the default settings (factory
settings).
(1) Choose <Color> from the Adjustment menu, and press
(2) Choose <Reset> from the <Color> menu, and press
.
The <Reset> menu appears.
(3) Select “Reset” with
or
, and press
The reset operation is completed.
.
.
● To reset all settings [Reset]
Reset all adjustments/settings to the factory default settings.
(1) Choose <Others> from the Adjustment menu, and press
(2) Choose <Reset> from the <Others> menu, and press
.
The <Reset> menu appears.
(3) Select “Reset” with
or
, and press
The reset operation is completed.
16
Chapter 2 Settings and Adjustments
.
.
• For default settings, refer to “Main
default settings (factory settings)” on
page 21.
Chapter 3 Connecting Cables
3-1 Connecting Peripheral USB Devices
This monitor has a hub compatible with USB. Connected to a PC compatible
with USB or another USB hub, this monitor functions as a USB hub allowing
connection to peripheral USB devices.
● Required System Environment
(1) A PC equipped with a USB port or another USB hub connected to a USB
compatible PC
(2) Windows 2000/XP/Vista or Mac OS 9.2.2 and Mac OS X 10.2 or later
(3) EIZO USB cable (MD-C93)
● Connection Procedure (Setup of USB Function)
(1) Connect the monitor first to a PC using the signal cable, and run the PC.
(2) Connect the supplied USB cable between the downstream USB port of a
USB compatible PC (or another USB hub) and the monitor’s upstream USB
port.
(3) When the USB function setup is completed, the monitor functions as a USB
hub allowing connection to various peripheral USB devices through its
downstream USB ports.
Attention
• This monitor may not work depending
on PC, OS or peripheral devices to be
used.
For USB compatibility of peripheral
devices, contact their manufactures.
• If the monitor is in the power saving
mode, or if the monitor is connected
to the power outlet with the monitor
turned off, all the devices connected
to the USB ports (upstream and
downstream) work. Therefore, power
consumption of the monitor varies
with connected devices even in the
power saving mode.
Upstream
Downstream
The USB function is set up automatically upon connection of the USB cable.
Chapter 3 Connecting Cables
17
Chapter 4 Troubleshooting
If a problem still remains after applying the suggested remedies, contact your local dealer.
• No-picture problems → See No.1 - No.2.
• Imaging problems → See No.3 - No.9.
• Other problems → See No.10 - No.12.
• USB problems → See No.13.
Problems
1. No picture
• Power indicator does not light.
• Power indicator is lighting blue.
• Power indicator is lighting orange.
2. The message below appears.
• This message appears when no signal is input.
[Single Display]
Possible cause and remedy
• Check whether the power cord is connected correctly.
• Press
•
•
•
•
.
Switch the input signal with
Operate the mouse or keyboard.
Turn on the PC.
Either SIGNAL1 or SIGNAL2 may have an error in dual
display mode. Check that in <Information> (see page
14).
This message appears when the signal is not input
correctly even when the monitor functions properly.
• The message shown left may appear, because some
PCs do not output the signal soon after power-on.
• Check whether the PC is turned on.
• Check whether the signal cable is connected properly.
• Switch the input signal with
. (Single display mode
only)
[Dual Display]
In dual display mode, the error message appears only
when both of SIGNAL1 and SIGNAL2 have errors.
• The message below shows that the input signal is
out of the specified frequency range. (Such signal
frequency is displayed in red.)
Example:
[Single Display]
• Select an appropriate display mode using the graphics
board’s utility software. Refer to the manual of the
graphics board for details.
[Dual Display]
In dual display mode, the error message appears only
when both of SIGNAL1 and SIGNAL2 have errors.
3. Characters are blurred.
• Adjust using <Smoothing>.
4. The screen is too bright or too dark.
• Adjust <Brightness>. (The LCD monitor backlight has a
fixed life span. When the screen becomes dark or begins
to flicker, contact your local dealer.)
18
Chapter 4 Troubleshooting
Problems
5. Afterimages appear.
Possible cause and remedy
• Use a screen saver or off timer function for a long-time
image display.
• Afterimages are particular to LCD monitors. Avoid
displaying the same image for a long time.
6. Green/red/blue/white dots or defective dots remain • This is due to LCD panel characteristics and is not a
on the screen.
failure.
7. Interference patterns or pressure marks remain on • Leave the monitor with a white or black screen. The
the screen.
symptom may disappear.
8. Noise appears on the screen.
• When HDCP signal is input, the normal screen may not
appear at once.
9. The display image is appeared in lengthwise.
• Check whether the kind of cables connected with the
monitor and the PC. (Connect the monitor and cables
correctly by referring to “Connecting Cables” in Setup
Manual (page 3).)
10. The [Smoothing] icon on the Adjustment menu
[Screen] cannot be selected.
• Smoothing setting may not be required depending on the
display resolution. (You cannot choose the smoothing
icon.)
11. The Main menu of Adjustment menu does not start. • Check for Adjustment Lock function.
• Check whether the FineContrast menu is running. (Refer
to “Simple adjustment [FineContrast mode]” on page 7.)
12. Hissing noises emanate from the monitor.
• This monitor has a fan built-in to suppress the inside
temperature increase. The noise could be heard
depending on the installation location, but it’s not an
abnormality in function.
• For example, if the monitor is placed near the wall, make
more room between the monitor and the wall.
13. USB function cannot be set up.
• Check whether the USB cable is connected correctly.
• Check whether the PC and OS are USB compliant. (For
USB compliance of the respective devices, consult their
manufacturers.)
• Check the PC’s BIOS setting for USB when using
Windows. Refer to the manual of the PC for details.
Chapter 4 Troubleshooting
19
Chapter 5 Reference
5-1 Attaching an Arm
The stand can be removed and replaced with an arm (or another stand) to be
attached to the monitor.
[Attaching]
1 Lay the LCD monitor on a soft cloth spread over on a stable
surface with the panel surface facing down.
2 Remove the stand. (Prepare a screwdriver.)
Unscrew the four screws securing the unit and the stand with the
screwdriver.
3 Attach the monitor to the arm or stand.
Secure the monitor to the arm or stand using the screws specified in the
user’s manual of the arm or stand.
Attention
• When attaching an arm or stand,
follow the instructions of their user’s
manual.
• When using another manufacturer’s
arm or stand, confirm the following in
advance and select one conforming to
the VESA standard. Use M4 × 12 mm
screws supplied with the monitor.
– Clearance between the screw holes:
100 mm × 100 mm
–Thickness of plate: 2.6 mm
–Strong enough to support weight of
the monitor unit (except the stand)
and attachments such as cables.
• Attach an arm or stand to meet the
following tilt angles of the monitor.
–Up 45 degrees, down 45 degrees
(Within operating range)
• Connect the cables after attaching an
arm.
5-2 Cleaning
Clean the monitor periodically to keep the monitor clean and extend its life.
Attention
Cabinet
Clean the cabinet with a soft cloth dampened with little mild detergent.
• Never use any solvents or chemicals,
such as thinner, benzene, wax,
alcohol, and abrasive cleaner, which
may damage the cabinet or LCD
panel.
LCD Panel
• Clean the LCD panel with a soft cloth such as cotton cloth or lens cleaning
paper.
• Remove persistent stains gently with a cloth dampened with little water, and
then clean the LCD panel again with a dry cloth for better finishing.
• Optional ScreenCleaner is
recommended for cleaning the panel
surface.
20
Chapter 5 Reference
NOTE
5-3 Specifications
LCD Panel
29.8-inch (76 cm) TFT color LCD with anti-glare hard coating
Viewing angle: Horizontal 178°, Vertical 178° (CR: 10 or more)
Dot Pitch
0.2505 mm
Horizontal Scan Frequency
31 - 100 kHz
Vertical Scan Frequency
59 - 61 Hz
(VGA TEXT: 69 - 71 Hz)
Resolution
2560 dots × 1600 lines
Max. Dot Clock
269 MHz
Max. Display Colors
16.77 million colors
Display Area (H × V)
641.2 mm × 400.8 mm
Power Supply
100 - 120 VAC ±10% 50/60 Hz, 1.8 A
200 - 240 VAC ±10% 50/60 Hz, 0.8 A
Power Consumption
Max.: 170 W (normal mode)
Power saving mode: 2 W or less (for single signal input without USB)
Power switch Off: 1 W or less
Input Signal Connectors
SIGNAL 1:DVI-D, Dual Link/SIGNAL 2:DVI-D, Single Link (HDCP compliant)
Digital Signal Transmission
System
TMDS (SIGNAL1: Dual Link/SIGNAL2: Single Link)
Video Signal Memory
Digital Signal: 14 (preset: 0)
Plug & Play
VESA DDC 2B/EDID structure 1.3
Dimensions (Main unit)
689 mm (W) × 511.5 - 629.5 mm (H) × 254.7 mm (D)
(27.1 inch (W) × 20.1 - 24.8 inch (H) × 10.0 inch (D))
Dimensions (Main unit with
i•Sound L3)
689 mm (W) × 514.5 - 629.5 mm (H) × 254.7 mm (D)
(27.1 inch (W) × 20.3 - 24.8 inch (H) × 10.0 inch (D))
Dimensions (without stand)
689 mm (W) × 450 mm (H) × 90 mm (D)
(27.1 inch (W) × 17.7 inch (H) × 3.54 inch (D))
Weight (Main unit)
15.7 kg (34.6 lbs)
Weight (without stand)
11.2 kg (24.7 lbs)
Environmental Conditions
Operating temperature: 0 °C - 35 °C (32 °F - 95 °F)
Storage temperature: –20 °C - 60 °C (-4 °F - 140 °F)
Relative humidity: 30% - 80% (no condensation)
USB Standard
USB Specification Revision 2.0
USB Port
Upstream port × 1, Downstream port × 2
Main default settings (factory settings)
Smoothing
3
FineContrast Mode
Custom
PowerManager
DVI DMPM
Screen Size
Full Screen
Input Signal
Auto
Off Timer
Menu Settings
Disable
Menu Size
Normal
Menu Off Timer
45sec
Beep
On
Language
English
Chapter 5 Reference
21
Outside Dimensions
(Main unit and height adjustable stand (Portrait display available))
628(24.7)
588(23.1)
240(9.4)
51
(2.01)
57 90
(2.24) (3.54)
138.5(5.5)
unit : mm (inch)
SWIVEL
322.8(12.7)
405.6(16)
347.7(13.7)
689(27.1)
643.3(25.3)
22.9
1.6
(0.06)
294.5(11.6)
100
(3.9)
100
(3.9)
404.5(15.9)
17
(0.67)
9.5(0.37)
175(6.9)
118(4.6)
629.5(24.8)
179.5(7.1)
61.5
(2.42)
1.6
(0.06)
23.6
(0.93)
402.8(15.9)
450(17.7)
23.6
(0.93)
254.7(10)
Outside Dimensions
(Main unit with i•Sound L3 and height adjustable stand (Portrait display available))
361.2(14.2)
347.7(13.7)
514.5~629.5(20.3~24.8)
TILT
191.5(7.5)
22
Chapter 5 Reference
306(12)
294.5(11.6)
175(6.9)
1.6
(0.06)
1.6
(0.06)
191.5(7.5)
22.3
(0.88)
77.3
(3.04)
Connector Pin Assignment
• DVI-D connector
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
17 18 19 20 21 22 23 24
SIGNAL1 : Applicable to DualLink
Pin No.
Signal
Pin No.
Signal
Pin No.
Signal
1
T.M.D.S. Data 2-
9
T.M.D.S. Data1-
17
T.M.D.S. Data 0-
2
T.M.D.S. Data 2+
10
T.M.D.S. Data1+
18
T.M.D.S. Data 0+
3
T.M.D.S. Data2/4 Shield
11
T.M.D.S. Data1/3 Shield
19
T.M.D.S. Data 0/5 Shield
4
T.M.D.S. Data 4-
12
T.M.D.S. Data 3-
20
T.M.D.S. Data 5-
5
T.M.D.S. Data 4+
13
T.M.D.S. Data 3+
21
T.M.D.S. Data 5+
6
DDC Clock (SCL)
14
+5V Power
22
T.M.D.S. Clock Shield
7
DDC Data (SDA)
15
Ground (return for +5V,
Hsync, and Vsync)
23
T.M.D.S. Clock+
8
NC*
16
Hot Plug Detect
24
T.M.D.S. Clock-
SIGNAL2 : Applicable to SingleLink only
Pin No.
Signal
Pin No.
Signal
Pin No.
Signal
1
T.M.D.S. Data 2-
9
T.M.D.S. Data1-
17
T.M.D.S. Data 0-
2
T.M.D.S. Data 2+
10
T.M.D.S. Data1+
18
T.M.D.S. Data 0+
3
T.M.D.S. Data2/4 Shield
11
T.M.D.S. Data1/3 Shield
19
T.M.D.S. Data 0/5 Shield
4
NC*
12
NC*
20
NC*
5
NC*
13
NC*
21
NC*
6
DDC Clock (SCL)
14
+5V Power
22
T.M.D.S. Clock Shield
7
DDC Data (SDA)
15
Ground (return for +5V,
Hsync, and Vsync)
23
T.M.D.S. Clock+
8
NC*
16
Hot Plug Detect
24
T.M.D.S. Clock(NC*: No Connection)
• USB port
Upstream
Downstream
Contact No.
Signal
Remarks
1
VCC
Cable power
2
– Data
Serial data
3
+ Data
Serial data
4
Ground
Cable ground
Option List
Cleaning Kit
EIZO ScreenCleaner
Speaker Unit
i•Sound L3
Chapter 5 Reference
23
5-4 Glossary
DVI (Digital Visual Interface)
DVI is a digital interface standard. DVI allows direct transmission of the PC’s digital data without loss.
This adopts the TMDS transmission system and DVI connectors. There are two types of DVI connectors. One is
a DVI-D connector for digital signal input only. The other is a DVI-I connector for both digital and analog signal
inputs.
DVI DMPM (DVI Digital Monitor Power Management)
DVI DMPM is a digital interface power-saving function. The “Monitor ON (operating mode)” and “Active Off
(power-saving mode)” are indispensable for DVI DMPM as the monitor’s power mode.
HDCP (High-bandwidth Digital Contents Protection)
Digital signal coding system developed to copy-protect the digital contents, such as video, music, etc. This helps
to transmit the digital contents safely by coding the digital contents sent via DVI terminal on the output side and
decoding them on the input side.
Any digital contents cannot be reproduced if both of the equipments on the output and input sides are not applicable
to HDCP system.
Gain
This is used to adjust each color parameter for red, green and blue. An LCD monitor displays the color by the light
passing through the panel color filter. Red, green and blue are the three primary colors. All the colors on the screen
are displayed by combining these three colors. The color tone can be changed by adjusting the light intensity (volume)
passing through each color’s filter.
Gamma
Generally, the monitor brightness varies nonlinearly with the input signal level, which is called “Gamma Characteristic”.
A small gamma value produces a low-contrast image, while a large gamma value produces a high-contrast image.
Resolution
The LCD panel consists of numerous pixels of specified size, which are illuminated to form images. This monitor
consists of 2560 horizontal pixels and 1600 vertical pixels. At a resolution of 2560 × 1600, all pixels are illuminated
as a full screen (1:1).
sRGB (Standard RGB)
International standard for “color reproduction and color space” among peripheral devices (such as monitors, printers,
digital cameras, scanners). sRGB allows Internet users to closely match colors as a simple color matching means for
the Internet use.
Temperature
Color temperature is a method to measure the white color tone, generally indicated in degrees Kelvin. The screen
becomes reddish at a low temperature, and bluish at a high temperature, like the flame temperature.
5000K: Slightly reddish white
6500K: Warm white like paper white
9300K: Slightly bluish white
TMDS (Transition Minimized Differential Signaling)
A signal transmission system for digital interface.
24
Chapter 5 Reference
Congratulations!
The display you have just purchased carries the TCO’03 Displays label. This
means that your display is designed, manufactured and tested according to
some of the strictest quality and environmental requirements in the world.
This makes for a high performance product, designed with the user in focus
that also minimizes the Impact on our natural environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics
● Good visual ergonomics and image quality in order to improve the working environment for the user
and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution,
reflectance, colour rendition and image stability.
Energy
● Energy-saving mode after a certain time - beneficial both for the user and environment
● Electrical safety
Emissions
● Electromagnetic fields
● Noise emissions
Ecology
● The products must be prepared for recycling and the manufacturer must have a certified environmental
management system such as EMAS or ISO 14000
● Restrictions on
● chlorinated and brominated flame retardants and polymers
● heavy metals such as cadmium, mercury and lead.
The requirements includes in this label have been developed by TCO Development in co-operation with scientists,
experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in
influencing the development of IT equipment in a more user-friendly direction. Our labeling system with displays
in 1992 and is now requested by users and IT-manufacturers all over the world.
For more information, please visit
www.tcodevelopment.com
Chapter 5 Reference
25
For U.S.A. , Canada, etc. (rated 100-120 Vac) Only
FCC Declaration of Conformity
We, the Responsible Party
EIZO NANAO TECHNOLOGIES INC.
5710 Warland Drive, Cypress, CA 90630
Phone: (562) 431-5011
declare that the product
Trade name: EIZO
Model: FlexScan SX3031W
is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures.
*
*
*
*
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Note
Use the attached specified cable below or EIZO signal cable with this monitor so as to keep interference within the
limits of a Class B digital device.
- AC Cord
- Shielded Signal Cable (enclosed)
Canadian Notice
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada.
26
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor
Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standardzubehör gehörige
Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der
Auswahl des Schwenkarms sind die nachstehenden Hinweise zu berücksichtigen:
Der Standfuß muß den nachfolgenden Anforderungen entsprechen:
a)Der Standfuß muß eine ausreichende mechanische Stabilität zur Aufnahme des Gewichtes vom Bildschirmgerät
und des spezifizierten Zubehörs besitzen. Das Gewicht des Bildschirmgerätes und des Zubehörs sind in der
zugehörenden Bedienungsanleitung angegeben.
b)Die Befestigung des Standfusses muß derart erfolgen, daß die oberste Zeile der Bildschirmanzeige nicht höher
als die Augenhöhe eines Benutzers in sitzender Position ist.
c)Im Fall eines stehenden Benutzers muß die Befestigung des Bildschirmgerätes derart erfolgen, daß die Höhe der
Bildschirmmitte über dem Boden zwischen 135 – 150 cm beträgt.
d)Der Standfuß muß die Möglichkeit zur Neigung des Bildschirmgerätes besitzen (max. vorwärts: 5°, min. nach
hinten ≥ 5°).
e)Der Standfuß muß die Möglichkeit zur Drehung des Bildschirmgerätes besitzen (max. ±180°). Der maximale
Kraftaufwand dafür muß weniger als 100 N betragen.
f)Der Standfuß muß in der Stellung verharren, in die er manuell bewegt wurde.
g)Der Glanzgrad des Standfusses muß weniger als 20 Glanzeinheiten betragen (seidenmatt).
h)Der Standfuß mit Bildschirmgerät muß bei einer Neigung von bis zu 10° aus der normalen aufrechten Position
kippsicher sein.
Hinweis zur Ergonomie :
Dieser Monitor erfüllt die Anforderungen an die Ergonomie nach EK1-ITB2000 mit dem Videosignal, 2560 ×
1600 Digital Eingang und mindestens 60,0 Hz Bildwiederholfrequenz, non interlaced. Weiterhin wird aus
ergonomischen Gründen empfohlen, die Grundfarbe Blau nicht auf dunklem Untergrund zu verwenden (schlechte
Erkennbarkeit, Augenbelastung bei zu geringem Zeichenkontrast.)
„Maschinenlärminformations-Verordnung 3. GPSGV:
Der höchste Schalldruckpegel beträgt 70 dB(A) oder weniger gemäss EN ISO 7779“
27