Datalogic PowerScan PBT9500 Specifications

PowerScan™ BT9500 Family
Industrial Cordless Handheld
Area Imager Bar Code Reader
Quick Reference Guide
Datalogic ADC, Inc.
959 Terry Street
Eugene, OR 97402
USA
Telephone: (541) 683-5700
Fax: (541) 345-7140
©2013 Datalogic, Inc.
An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described
therein may be reproduced or transmitted in any form or by
any means without prior written permission of Datalogic ADC,
Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic
ADC”). Owners of Datalogic products are hereby granted a
non-exclusive, revocable license to reproduce and transmit
this documentation for the purchaser's own internal business
purposes. Purchaser shall not remove or alter any proprietary
notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any
reproductions of the documentation.
Should future revisions of this manual be published, you can
acquire printed versions by contacting your Datalogic representative. Electronic versions may either be downloadable
from the Datalogic website (www.datalogic.com) or provided
on appropriate media. If you visit our website and would like
to make comments or suggestions about this or other Datalogic publications, please let us know via the "Contact Datalogic" page.
DISCLAIMER
Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however,
Datalogic reserves the right to change any specification at any
time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of
Datalogic S.p.A. in many countries, including the U.S.A. and
the E.U. All other brand and product names may be trademarks of their respective owners.
PATENTS
This product may be covered by one or more of the following patents:
Design Patents: AU344427; AU344428; AU344429; EP1970237;
USD682277; ZL 201230284676.X
Utility Patents: EP996284; EP999514; EP1128315; EP1172756;
EP1396811; EP1413971; EP1828957; JP4435343; US5481098;
US6478224; US6512218; US6513714; US6561427; US6808114;
US6877664; US6997385; US7053954; US7234641; US7387246;
US7721966.
Table of Contents
END USER LICENSE AGREEMENT ................................................ iii
Software Product Policy ............................................................... vii
Customers Under Software Support .................................. vii
Description ....................................................................................... 1
General Features .................................................................... 1
Using the PowerScan™ PBT9500 ................................................... 2
Installing the Battery Pack ............................................................ 3
Charging the Batteries .......................................................... 6
Changing the Batteries ................................................ 6
Programming ...................................................................................7
Using Programming Bar Codes ............................................7
Configure Other Settings ....................................................... 7
Resetting Product Defaults .................................................. 7
Set Date and Time .......................................................................... 8
Linking the Reader .......................................................................... 9
Link Datalogic RF Devices to Base.............................. 9
Linking to a Bluetooth Adapter in Serial Port Profile
(Slave) Mode .................................................................. 9
Linking to a Bluetooth Adapter in HID mode........... 10
Variable PIN Code ....................................................... 11
HID Country Mode .........................................................................12
HID Caps Lock State ......................................................................16
HID Alt Mode ..................................................................................17
Power Off .......................................................................................17
Operating Mode .............................................................................18
Scan Mode ............................................................................18
Motion Aiming Control ........................................................19
Pick Mode .......................................................................................20
Multiple Label Reading ........................................................20
Technical Specifications ...............................................................21
LED and Beeper Indications .........................................................25
Error Codes ....................................................................................28
Cleaning ..........................................................................................29
Regulatory Information ................................................................30
Statement of Agency Compliance ......................................30
Imager Labeling ....................................................................33
WEEE Statement ..................................................................38
Datalogic ADC Limited Factory Warranty ...................................39
Ergonomic Recommendations ....................................................41
Services and Support ....................................................................42
Hex-Numeric Keypad ....................................................................43
For HID Variable Pin Code only.................................. 45
Quick Reference Guide
i
NOTES
ii
PowerScan™ PBT9500
Datalogic ADC, Inc.
PowerScan™ 9500 PRODUCT SERIES
END USER LICENSE AGREEMENT
Notice to End User: The Datalogic Product you have acquired contains
embedded Software, which is integral to the product's operation. This
Software is being provided to you under license, subject to the terms
and conditions of this Agreement. If you use the Datalogic Product, you
will be deemed to have accepted the terms and conditions of this
Agreement. If you do not intend to be bound to the terms of this
Agreement, Datalogic is not willing to license the Software to you, you
may not use the Datalogic Product or the Software, and you must contact the party from whom you acquired the Datalogic Product for
instructions.
This End User Software License Agreement ("Agreement") is a legally
binding agreement governing the licensing of the Software and Documentation by Datalogic ADC, Inc. and its Affiliates ("Datalogic") to the
entity or person who has purchased or otherwise acquired a Datalogic
Product ("End User"). For purposes of this Agreement, any software
that is associated with a separate end-user license agreement is
licensed to you under the terms of that license agreement. Datalogic
and End User hereby agree as follows:
1. Definitions
1.1 "Affiliate" means a business entity currently existing or later
acquired that controls, is controlled by, or is under common control
with Datalogic S.p.A.
1.2 "Documentation" means materials such as user's guides, program
reference guides, quick reference guides, manuals, or similar materials associated with or related to the Datalogic Product, whether in
printed, "online", or other form.
1.3 "Proprietary Information" means: (a) source code, object code, software, documentation, and any related internal design, system
design, data base design, algorithms, technology, technical data or
information, implementation techniques, and trade secrets related
to the Software, (b) any other trade secrets marked appropriately
or identified as proprietary or confidential, and (c) any information
that End User, under the circumstances, should recognize as confidential. Proprietary Information does not include any information
that the receiving party can establish was (1) in the public domain,
(2) already in the receiving party's possession or rightfully known
prior to receipt, (3) rightfully learned from a third party not in violation of any other's proprietary rights, or (4) independently developed without access to Proprietary Information.
1.4 "Datalogic Product" means the Datalogic® Powerscan™ series scanner product, including all embedded Software in and all Documentation related to such product, which has been purchased or
otherwise acquired by End User, whether obtained directly or indirectly from Datalogic.
1.5 "Software" means any software or computer programs of Datalogic
or its third party licensors in machine readable form which is
embedded in the Datalogic Product, whether obtained directly or
indirectly from Datalogic, including any replacement, update,
upgrade, enhancement or modification.
2. Scope Of License Granted
2.1 Datalogic grants to End User a non-exclusive, non-transferable,
perpetual license to use the Software, solely on the Datalogic Product in which it is embedded ("designated Datalogic Product"), in
machine-readable form only, solely for End User's internal business purposes. This Agreement does not convey ownership of the
Software to End User. Title to the Software shall be and remain
Quick Reference Guide
iii
END USER LICENSE AGREEMENT
with Datalogic or the third party from whom Datalogic has
obtained a licensed right. As used in this Agreement, the term
"purchase" or its equivalents when applied to the Software shall
mean "acquire under license." End User is not entitled to receipt or
use of the source code to any Software.
2.2 End User shall not copy, modify, decompile, disassemble, reverse
engineer, or otherwise reproduce or remanufacture the Software,
whether modified or unmodified, nor sell, assign, sublicense, distribute, lend, rent, give, or otherwise transfer the Software to any
other person or organization, for purposes other than as expressly
provided in this Agreement, without Datalogic's prior written consent.
3. Transfers, Support
3.1 Any copying, installing, reproduction, remanufacture, reverse engineering, electronic transfer, or other use of the Software on other
than the designated Datalogic Product will be a material breach of
this Agreement. However, Datalogic may elect not to terminate
this Agreement or the granted licenses, but instead may elect to
notify End User that End User is deemed to have ordered and
accepted a license for each breaching use. End User shall pay Datalogic the applicable list price for such licenses as of the date of such
breach.
3.2 End User shall not sell, assign, sublicense, distribute, lend, rent,
give, or otherwise transfer the Datalogic Product to any third party
unless such third party agrees with Datalogic in writing to be
bound by the terms and conditions of this Agreement. Any such
transfer of the Datalogic Product absent such agreement shall be
null and void.
3.3 End User may obtain support for Software from Datalogic at Datalogic's standard support fees and under Datalogic's standard support terms and conditions in effect at the time the support is
requested.
4. Intellectual Property
End User acknowledges that the Software constitutes valuable trade
secrets of Datalogic or Datalogic's third party licensors and that the
Software is protected by intellectual property laws and treaties. The
license set forth in this Agreement does not transfer to End User any
ownership of Datalogic's or its third party licensors' copyrights, patents,
trademarks, service marks, trade secrets, or other intellectual property
rights and End User shall have no right to commence any legal actions
to obtain such rights. End User shall not remove, modify, or take any
other action that would obscure any copyright, trademark, patent
marking, or other intellectual property notices contained in or on the
Datalogic Product.
5. Proprietary Information
5.1 End User acknowledges that Proprietary Information is the confidential, proprietary, and trade secret property of Datalogic and Datalogic's third party licensors and End User acquires no right or
interest in any Proprietary Information.
5.2 End User shall not disclose, provide, or otherwise make available
the Proprietary Information of Datalogic or its third party licensors
to any person other than End User's authorized employees or
agents who are under confidentiality agreement, and End User
shall not use the Proprietary Information other than in conjunction
with use of the Datalogic Product exclusively for End User's internal
business purposes. End User shall take steps to protect the Proprietary Information no less securely than if it were End User's own
intellectual property.
5.3 The provisions of this Proprietary Information Section shall survive
iv
PowerScan™ PBT9500
END USER LICENSE AGREEMENT
and continue for five (5) years after the termination of this Agreement.
6. Limited Warranty
6.1 Datalogic warrants that, under normal use and operation, the Datalogic Product will conform substantially to the applicable Documentation for the period specified in the Documentation. During
this period, for all reproducible nonconformities for which Datalogic
has been given written notice, Datalogic will use commercially reasonable efforts to remedy nonconformities verified by Datalogic.
End User agrees to supply Datalogic with all reasonably requested
information and assistance necessary to help Datalogic in remedying such nonconformities. For all defects reported to Datalogic
within the warranty period, Datalogic's liability is limited to providing End User with one copy of corrections or responding to End
User's problem reports according to Datalogic's standard assistance practices. Datalogic does not warrant that the product will
meet End User's requirements or that use of the product will be
uninterrupted or error free, or that Datalogic's remedial efforts will
correct any nonconformance. This limited warranty does not cover
any product that have been subjected to damage or abuse,
whether intentionally, accidentally, or by neglect, or to unauthorized repair or unauthorized installation, and shall be void if End
User modifies the product, uses the product in any manner other
than as established in the Documentation, or if End User breaches
any of the provisions of this Agreement.
6.2 EXCEPT AS PROVIDED IN THIS AGREEMENT, THE DATALOGIC
PRODUCT IS PROVIDED "AS IS" AND DATALOGIC MAKES NO WARRANTIES OF ANY KIND, EXPRESS OR IMPLIED, WRITTEN OR ORAL,
WITH RESPECT TO THE PRODUCT, AND SPECIFICALLY DISCLAIMS
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE.
7. Infringement
7.1 Datalogic will defend End User against any claim in a lawsuit that
the Datalogic Product furnished hereunder infringe a United States
patent or copyright of a third party and Datalogic will pay any damages finally awarded against End User by a court of competent
jurisdiction that are attributable to such claim or will pay End
User's part of any settlement that is attributable to such claim,
provided, that 1) End User notifies Datalogic promptly in writing of
the claim, 2) Datalogic controls the defense or settlement of the
claim, and 3) End User cooperates fully with Datalogic in such
defense or settlement. All notices of a claim should be sent to Datalogic ADC, Inc., Legal Department, 959 Terry Street, Eugene, OR
97402.
7.2 In the defense or settlement of any such claim, Datalogic may, at
its option, 1) procure for End User the right to continue using the
Datalogic Product, 2) modify the Datalogic Product so that it
becomes non-infringing, 3) replace the Datalogic Product with an
equivalent product not subject to such claim, or 4) provide End User
an opportunity to return the Datalogic Product and receive a refund
of the purchase price paid, less a reasonable allowance for use.
7.3 Datalogic shall have no liability to End User for claims of infringement based upon 1) the use of any Datalogic Product in combination with any product which Datalogic has not either furnished or
authorized for use with such Datalogic Product 2) the use of any
Datalogic Product designed, manufactured, or modified to the
specifications of End User, or 3) End User's modification of the Datalogic Product without written authorization from Datalogic.
7.4 THE FOREGOING STATES DATALOGIC'S COMPLETE AND ENTIRE
OBLIGATION CONCERNING CLAIMS OF PATENT, COPYRIGHT, OR
OTHER INTELLECTUAL PROPERTY INFRINGEMENT, CANCELS AND
Quick Reference Guide
v
END USER LICENSE AGREEMENT
SUPERCEDES ANY PRIOR AGREEMENTS, WHETHER ORAL OR
WRITTEN, BETWEEN THE PARTIES CONCERNING SUCH CLAIMS,
AND WILL NOT BE MODIFIED OR AMENDED BY ANY PAST, CONTEMPORANEOUS, OR FUTURE AGREEMENTS OR DEALINGS
BETWEEN THE PARTIES, WHETHER ORAL OR WRITTEN, EXCEPT AS
SET FORTH IN A FUTURE WRITING SIGNED BY BOTH PARTIES.
8. Limitation Of Liability
EXCEPT AS PROVIDED IN SECTION 7, DATALOGIC SHALL NOT BE LIABLE
FOR ANY CLAIMS AGAINST END USER BY ANY OTHER PARTY. IN NO
EVENT SHALL DATALOGIC'S LIABILITY FOR DAMAGES, IF ANY,
WHETHER BASED UPON CONTRACT, TORT (INCLUDING NEGLIGENCE),
PRODUCT LIABILITY, STRICT LIABILITY, WARRANTY, OR ANY OTHER
BASIS, EXCEED THE PRICE OR FEE PAID BY END USER FOR THE DATALOGIC PRODUCT. UNDER NO CIRCUMSTANCES SHALL DATALOGIC BE
LIABLE TO END USER OR ANY THIRD PARTY FOR LOST PROFITS, LOST
DATA, INTERRUPTION OF BUSINESS OR SERVICE, OR FOR ANY OTHER
SPECIAL, CONSEQUENTIAL, CONTINGENT, INDIRECT, INCIDENTAL,
PUNITIVE, EXEMPLARY, OR OTHER SIMILAR DAMAGES, EVEN IF DATALOGIC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
9. Government Restricted Rights; International Use
9.1 Use, duplication, or disclosure of the Software by the U.S. Government is subject to the restrictions for computer software developed at private expense as set forth in the U.S. Federal Acquisition
Regulations at FAR 52.227-14(g), or 52.227-19 or in the Rights in
Technical Data and Computer Software clause at DFARS 252.2277013(c)(1)(ii), whichever is applicable.
9.2 If End User is using the Datalogic Product outside of the United
States, End User must comply with the applicable local laws of the
country in which the Datalogic Product is used, with U.S. export
control laws, and with the English language version of this Agreement. The provisions of the "United Nations Convention on International Sale of Goods" shall not apply to this Agreement.
10. Termination
10.1Either party may terminate this Agreement or any license granted
under this Agreement at any time upon written notice if the other
party breaches any provision of this Agreement.
10.2Upon termination of this Agreement, End User immediately shall
cease using any nonembedded software and shall return to Datalogic or destroy all non-embedded software covered by this Agreement, and shall furnish Datalogic with a certificate of compliance
with this provision signed by an officer or authorized representative of End User. For embedded software, End User agrees to sign a
waiver prepared by Datalogic concerning further use of the embedded Software. End User's resumed or continued use of the embedded Software after termination shall constitute End User's
agreement to be bound by the terms and conditions of this Agreement for such use.
11. General Provisions
11.1 Entire Agreement; Amendment. This document contains the
entire agreement between the parties relating to the licensing of
the Software and supersedes all prior or contemporaneous agreements, written or oral, between the parties concerning the licensing of the Software. This Agreement may not be changed,
amended, or modified except by written document signed by Datalogic.
11.2 Notice. All notices required or authorized under this Agreement
shall be given in writing, and shall be effective when received, with
evidence of receipt. Notices to Datalogic shall be sent to the attenvi
PowerScan™ PBT9500
Software Product Policy
tion of Contract Administration, Datalogic ADC, Inc., 959 Terry
Street, Eugene, OR 97402, or such other address as may be specified by Datalogic in writing.
11.3 Waiver. A party's failure to enforce any of the terms and conditions of this Agreement shall not prevent the party's later enforcement of such terms and conditions.
11.4 Governing Law; Venue: This Agreement and the rights of the parties hereunder shall be governed by and construed in accordance
with the laws of the State of Oregon U.S.A, without regard to the
rules governing conflicts of law. The state or federal courts of the
State of Oregon located in either Multnomah or Lane counties shall
have exclusive jurisdiction over all matters regarding this Agreement, except that Datalogic shall have the right, at its absolute discretion, to initiate proceedings in the courts of any other state,
country, or territory in which End User resides, or in which any of
End User's assets are located.
11.5 Attorneys' Fees. In the event an action is brought to enforce the
terms and conditions of this Agreement, the prevailing party shall
be entitled to reasonable attorneys' fees, both at trial and on
appeal.
- END -
Software Product Policy
Datalogic reserves the right to ship its products with the latest
version of software/firmware available. This provides our customers with the very latest in Datalogic software technology.
The only exception to this policy is when the buyer has a signed
contract with Datalogic that clearly defines the terms and conditions for making software/firmware changes in products shipped
to the buyer.
Customers Under Software Support
Customers that elect to subscribe to Datalogic Software Maintenance and Support Agreement will receive 30 days advance notification of: (1) the release of a new software version; and/or (2)
discontinuation of any prior software version that will no longer
be supported. Datalogic will provide maintenance for a fee that
will assist customers in transitioning to the next software version. If a customer is currently using the software version being
discontinued, the customer may elect to transition to any one of
the newer versions, depending on the hardware in use.
To arrange for a Software Maintenance and Support Agreement
please contact your Datalogic sales person.
Quick Reference Guide
vii
Software Product Policy
NOTES
viii
PowerScan™ PBT9500
Powerscan™ PBT9500
Description
The PowerScan™ PBT9500 is a feature-rich and rugged
area imager reader. It is offered in several different models to better fit the different needs of each customer.
The table below shows the unique features of each model:
Model P/N
Optical feature
PBT9500-XX
Standard optic, standard and low density codes
Autofocus optic, High, standard and low density
codes, wide angle
High Density optic, high and medium density
codes, DPM (laser, ink jet and dot peen)
PBT9500-HPXX
PBT9500DPMXX
General Features
Omni-directional
Operating
To read a symbol or capture an image, you simply aim the reader and pull the trigger. Since
the PowerScan™ PBT9500 is a powerful omnidirectional reader, the orientation of the symbol is not important.
Decoding
Thanks to powerful algorithms, PowerScan™
PBT9500 reliably decodes all major 1D (linear)
barcodes, 2D stacked codes (such as PDF417), 2D
matrix symbols (such as DataMatrix), postal
codes (such as POSTNET, PLANET). The data
stream — acquired from decoding a symbol — is
rapidly sent to the host. The reader is immediately available to read another symbol.
Formatting and
Concatenating
The string of a decoded code may be processed
according to either a simple or advanced data
formatting and be concatenated.
Imaging
PowerScan™ PBT9500 can also function as a
camera by capturing entire images (valid only
for RS-232 and USB-COM on the Base Station).
Quick Reference Guide
1
Using the PowerScan™ PBT9500
Autoscanning
An autoscan command causes the reader to
scan continuously and to monitor the central
zone of its reading area.
Flash Memory
Flash technology allows you to upgrade the
PowerScan™ PBT9500 reader as new symbologies are supported or as new features become
available.
The reader can be set up to select and output a
subset of data elements from USA Driver
License PDF417 barcodes. This feature can be
USA Driver License
enabled using either Datalogic Aladdin™ or the
Parsing
barcodes in the USA Driver License Parsing
Quick Reference Guide (QRG), available on the
Datalogic website.
Using the PowerScan™ PBT9500
The PowerScan™ PBT9500 normally functions by capturing and decoding bar codes. The reader is equipped with
an internal motion-sensing function which activates the
aiming system on device motion. The intelligent aiming
system indicates the field of view which should be positioned over the bar code:
Table 1. Aiming System
Model P/N
Aimer pattern
PBT9500/
PBT9500-DPM
PBT9500-HP
2
PowerScan™ PBT9500
Installing the Battery Pack
The field of view indicated by the aiming system will be
smaller when the reader is closer to the bar code and
larger when it is farther from the code. Symbologies with
smaller bars or elements (mil size) should be read closer
to the unit. Symbologies with larger bars or elements (mil
size) should be read farther from the unit.
If the entire bar code is within the aiming field, you will get
a good read. Successful reading is signaled by an audible
tone plus a good-read green spot LED indicator.
Reference the PowerScan 9500 Product Reference Guide
(PRG) for more information about this feature and other
programmable settings.
Installing the Battery Pack
To install, charge and/or do any other action on the battery, follow the instructions in this manual.
To charge the Battery Pack, See “Charging
the Batteries” on page 6.
Datalogic recommends annual replacement
of rechargeable battery packs to ensure
maximum performance.
WARNING
Do not discharge the battery using any
device except for the scanner. When the battery is used in devices other than the designated product, it may damage the battery or
reduce its life expectancy. If the device
causes an abnormal current to flow, it may
cause the battery to become hot, explode or
ignite and cause serious injury.
Lithium-ion battery packs may get hot,
explode or ignite and cause serious injury if
exposed to abusive conditions. Be sure to
follow the safety warnings that follow:
• Do not place the battery pack in fire or heat.
• Do not connect the positive terminal and
negative terminal of the battery pack to each
other with any metal object (such as wire).
• Do not carry or store the battery pack
together with metal objects.
Quick Reference Guide
3
Installing the Battery Pack
• Do not pierce the battery pack with nails,
strike it with a hammer, step on it or otherwise subject it to strong impacts or shocks.
• Do not solder directly onto the battery pack.
WARNING
• Do not expose the battery pack to liquids, or
allow the battery to get wet.
• Do not apply voltages to the battery pack
contacts.
In the event the battery pack leaks and the
fluid gets into your eye, do not rub the eye.
Rinse well with water and immediately seek
medical care. If left untreated, the battery
fluid could cause damage to the eye.
Always charge the battery at 32° – 113°F (0°
- 45°C) temperature range.
CAUTION
Use only the authorized power supplies, battery pack, chargers, and docks supplied by
your Datalogic reseller. The use of any other
power supplies can damage the device and
void your warranty.
Do not disassemble or modify the battery.
The battery contains safety and protection
devices, which, if damaged, may cause the
battery to generate heat, explode or ignite.
Do not place the battery in or near fire, on
stoves or other high temperature locations.
Do not place the battery in direct sunlight, or
use or store the battery inside cars in hot
weather. Doing so may cause the battery to
generate heat, explode or ignite. Using the
battery in this manner may also result in a
loss of performance and a shortened life
expectancy.
Do not place the battery in microwave ovens,
high-pressure containers or on induction
cookware.
Immediately discontinue use of the battery
if, while using, charging or storing the battery, the battery emits an unusual smell,
feels hot, changes color or shape, or appears
abnormal in any other way.
4
PowerScan™ PBT9500
Installing the Battery Pack
Do not replace the battery pack when the
device is turned on.
Do not remove or damage the battery pack’s
label.
CAUTION Do not use the battery pack if it is damaged
in any part. Battery pack usage by children
should be supervised.
As with other types of batteries, Lithium-Ion (LI) batteries
will lose capacity over time. Capacity deterioration is
noticeable after one year of service whether the battery is
in use or not. It is difficult to precisely predict the finite life
of a LI battery, but cell manufacturers rate them at 500
charge cycles. In other words, the batteries should be
expected to take 500 full discharge / charge cycles before
needing replacement. This number is higher if partial discharging / recharging is adhered to rather than full / deep
discharging.
The typical manufacturer advertised useful life of LI batteries is one to three years, depending on usage and number of charges, etc., after which they should be removed
from service, especially in mission critical applications. Do
not continue to use a battery that is showing excessive
loss of capacity, it should be properly recycled / disposed
of and replaced. For most applications, batteries should
be replaced after one year of service to maintain customer
satisfaction and minimize safety concerns.
Collect and recycle waste batteries separately from the
device in comply with European Directive 2006/66/EC,
2011/65/EU, 2002/96/EC and 2012/19/EU and subsequent modifications, US and China regulatory and others
laws and regulations about the environment.
Quick Reference Guide
5
Installing the Battery Pack
Charging the Batteries
Once the BC 90x0-BT is powered, you can charge the
reader's batteries. Place the PowerScan™ BT9500 into the
BC 90x0-BT cradle. The Reader LED on the cradle/battery
charger turns red.
The battery is completely charged when the Reader LED
on the cradle/battery charger turns green.
The battery can also be charged in the spare battery slot
(BC91xx models only) or using the Multi Battery Charger
accessory.
Changing the Batteries
1.
Push the button at the bottom of the handle as
shown to release the battery.
2.
Pull down to remove the battery.
Button
1
2
6
PowerScan™ PBT9500
Programming
WARNING
Do not incinerate, disassemble, short terminals or expose to high temperature. Risk
of fire, explosion. Use specified charger
only. Risk of explosion if the battery is
replaced by an incorrect type. Dispose of
the batteries as required by the relevant
laws in force.
Programming
The reader is factory-configured with a set of standard
default features. Customize your reader through use of
the programming bar codes available in the PowerScan
PBT9500. Check the corresponding features section for
your interface, and also the Data Editing and Symbologies
chapters of the PRG.
Using Programming Bar Codes
This manual contains bar codes which allow you to reconfigure your reader. Some programming bar code labels,
like the "Reset Default Settings" on page 8, require only
the scan of that single label to enact the change.
Other bar codes require the reader to be placed in Programming Mode prior to scanning them. Scan an ENTER/
EXIT bar code once to enter Programming Mode; scan the
desired parameter settings; scan the ENTER/EXIT bar
code again to accept your changes, which exits Programming Mode and returns the reader to normal operation.
Configure Other Settings
Additional programming bar codes are available in the
PRG to allow for customizing programming features. If
your installation requires different programming than the
standard factory default settings, refer to the PRG.
Resetting Product Defaults
If you aren’t sure what programming options are in your
reader, or you’ve changed some options and want your
custom factory settings restored, scan the bar code below
Quick Reference Guide
7
Set Date and Time
to reset the reader to initial configuration. See the PRG for
other options, and a listing of standard factory settings.
Factory defaults are based on the interface
type. Be sure your reader is configured for the
correct interface before scanning this label.
Reset Default Settings
Set Date and Time
1.
Scan the Enter/Exit Programming barcode
below to set date and time.
ENTER/EXIT PROGRAMMING MODE
2.
Scan the Set Date barcode + six digits for Year,
Month and Day (YYMMDD) from the HexNumeric Keypad on page 43.
Set Date
3.
Scan Set Time + six digits for Hours, Minutes and
Seconds (HHMMSS) from the Hex-Numeric Keypad on page 43.
4.
Scan the Enter/Exit Programming barcode to
complete.
Set Time
8
PowerScan™ PBT9500
Linking the Reader
Linking the Reader
Link Datalogic RF Devices to Base
For RF devices, before configuring the interface it is necessary to link the handheld with the base.
To link the handheld and the base, press the trigger to
wake up the handheld and mount it into the base. If the
reader was previously linked to another base, you must
first press and hold the button on the base (>5 seconds),
then scan the Unlink bar code before re-linking to the new
base.
Unlink
Linking to a Bluetooth Adapter in Serial Port
Profile (Slave) Mode
1.
Install any drivers provided with the Bluetooth
adapter.
2.
Scan the Enable RF Link to Server label below to
make the scanner visible to the host computer.
3.
Use the host computer’s Bluetooth manager to
“Discover new devices” and select "Datalogic
Scanner." If you receive an error message, it may
be necessary to disable security on the device.
4.
Use an RS-232 terminal program to see incoming data on the port designated by the computer's Bluetooth manager.
Enable RF Link to Server
Quick Reference Guide
9
Linking the Reader
Linking to a Bluetooth Adapter in HID mode
1.
Install any drivers provided with the Bluetooth
adapter.
2.
Scan the Link to PC in HID label below..
3.
Use the host computer’s Bluetooth manager to
“Discover new devices” and select "Datalogic
Scanner." If you receive an error message, it may
be necessary to disable security on the device.
4.
Use a text editor to see incoming data on the
port designated by the computer's Bluetooth
manager..
Link to PC in HID
The Powerscan BT9500 can be set up to require
a PIN code when connecting. If you want to set
up a PIN, or when adding new equipment to a
system that uses a custom security PIN, please
see the PRG for information.
10
PowerScan™ PBT9500
Linking the Reader
Variable PIN Code
Some Bluetooth drivers on the Host (such as WIDCOMM
and BlueSoleil 8) require a Variable PIN Code. When
attempting connection, the application presents a window
that includes a PIN Code which is to be input using the
PowerScan BT9500. Please read the bar code "Variable
PIN Code" and restart the sequence from step 2 above.
$P,CBTHP01,P\r
Variable PIN Code
When you hear the beep and see the Green LED blinking
indicating the reader is waiting for an alphanumeric entry,
enter the required variable PIN Code by scanning the corresponding bar codes in the “Hex-Numeric Keypad” section at the back of this manual for alphanumeric entry.
Finish by scanning the Exit HID Variable PIN Code label.
Exit HID Variable PIN Code
Quick Reference Guide
11
HID Country Mode
HID Country Mode
When the Reader is connected with a Bluetooth Adapter
in HID mode, you may want to set the country for which
your PC is localized. In order to do that, read one of the
configuration command labels below.
HID COUNTRY MODE
ENTER/EXIT PROGRAMMING MODE
Country Mode = U.S.
Country Mode = Belgium
Country Mode = Britain
Country Mode = Croatia
12
PowerScan™ PBT9500
HID Country Mode
HID COUNTRY MODE (continued)
Country Mode = Czech Republic
Country Mode = Denmark
Country Mode = France
Country Mode = French Canadian
Country Mode = Germany
Country Mode = Hungary
Quick Reference Guide
13
HID Country Mode
HID COUNTRY MODE (continued)
Country Mode = Italy
Country Mode = Japanese 106-key
Country Mode = Lithuanian
Country Mode = Norway
Country Mode = Poland
Country Mode = Portugal
14
PowerScan™ PBT9500
HID Country Mode
HID COUNTRY MODE (continued)
Country Mode = Romania
Country Mode = Spain
Country Mode = Sweden
Country Mode = Slovakia
Country Mode = Switzerland
Quick Reference Guide
15
HID Caps Lock State
HID Caps Lock State
This option specifies the format in which the reader sends
character data.
ENTER/EXIT PROGRAMMING MODE
Caps Lock State = Caps Lock OFF
Caps Lock State = Caps Lock ON
Caps Lock State = AUTO Caps Lock Enable
16
PowerScan™ PBT9500
HID Alt Mode
HID Alt Mode
Read the configuration command label below for the HID
Alt Mode feature.
ENTER/EXIT PROGRAMMING MODE
HID Alt Mode = OFF
HID Alt Mode = ON
Power Off
Scan the bar code below to shut off power to the BT handheld until the next trigger pull.
PowerOff
Quick Reference Guide
17
Operating Mode
Operating Mode
Scan Mode
The imager can be set to operate in one of several scanning modes. See the PRG for more information and settings for any of the options:
Trigger Single (Default) — When the trigger is pulled, scanning is activated until one of the following occurs:
•
a programmable duration1 has elapsed
•
a label has been read
•
the trigger is released
Trigger Hold Multiple — When the trigger is pulled, scanning starts and the product scans until the trigger is
released or “maximum scan on time”1 has elapsed. Reading a label does not disable scanning. Double Read Timeout1 prevents undesired multiple reads in this mode.
Trigger Pulse Multiple — When the trigger is pulled and
released, scanning is activated until programmable duration1 has elapsed or the trigger has been pulled again to
transition to another state. Double Read Timeout1 prevents undesired multiple reads while in this mode.
Flashing — The reader flashes1 on and off regardless of the
trigger status.
Always On — No trigger pull is required to read a bar code.
Scanning is continually on. If the trigger is pulled, the
reader acts as if it is in Trigger Single (Default) Mode. Double Read Timeout1 prevents undesired multiple reads
while in this mode.
Stand Mode — No trigger pull is required to read a bar
code. Scanning is turned on automatically when an item is
placed in reader’s field of view. If the trigger is pulled, the
reader acts as if it is in Single Read mode. Double Read
Timeout1 prevents undesired multiple reads while in this
mode.
1.
18
See the Product Reference Guide (PRG) for more information
PowerScan™ PBT9500
Operating Mode
Operating Mode (continued)
ENTER/EXIT PROGRAMMING MODE
Scan Mode =
Trigger Single
Scan Mode = Trigger
Pulse Multiple
Scan Mode =
Trigger Hold Multiple
Scan Mode = Flashing
Scan Mode = Always On
Scan Mode = Stand Mode
Motion Aiming Control
This feature configures the ability of the scanner to
Enable/Disable the Aiming system when motion is
detected. Scan the Enter/Exit Programming bar code
above, then either of the barcodes below.
Motion Aiming Control =
Enable
Quick Reference Guide
Motion Aiming Control =
Disable
19
Pick Mode
Pick Mode
Pick Mode is a Decoding and Transmission process where
bar codes that are not within the configurable distance
from the center of the aiming pattern are not acknowledged or transmitted to the host. It is active only in Trigger
Single mode. If the scanner switches to a different Read
Mode, Pick Mode is automatically disabled.
This feature is not compatible with Multiple
Labels Reading in a Volume. See the PRG for
more information.
ENTER/EXIT PROGRAMMING MODE
PIck Mode = Disable
Pick Mode = Enable
Multiple Label Reading
The reader offers a number of options for multiple label
reading. See the PRG or software configuration tool for
descriptions of these features and programming labels.
20
PowerScan™ PBT9500
Technical Specifications
Technical Specifications
The following tables contain Physical and Performance
Characteristics, User Environment and Regulatory information.
Item
Description
PHYSICAL CHARACTERISTICS
Dimensions
Height: 212 mm
Length: 110 mm
Width: 74 mm
Weight
395 g
ELECTRICAL CHARACTERISTICS
Battery Type
Charge time for
full charge from
full discharge
Li-Ion battery pack
4 hours with external power supply adaptera
Typical 10 hours with Host power (in this
case no supply adapter is needed)a
Operating
autonomy (continuous reading)
30,000 reads (typical)
Cradle consumption and DC input
supply range
Volt 10-30 VDC; Power <8Wb;
Max 500mA when in host/bus powered
modeb.
a. Charge Times are much lower when battery is within daily typical operating
condition.
b. Typical input current measured under factory default configuration.
Quick Reference Guide
21
Technical Specifications
PERFORMANCE CHARACTERISTICS
Light Source
LED
Roll (Tilt) Tolerance
± 180°
Pitch Tolerance
± 40°
Skew (Yaw) Tolerance
± 40°
Print Contrast
Minimum
15% minimum
reflectance
Item
Resolution
Description
PBT9500
PBT9500-HP
Max resolution 1D
4 mils
Max resolution 2D
7.5 mils
1D 2.5 mil
2D 4 mil
DEPTH OF FIELD (TYPICAL)a
Symbology
Standard Model:
High Performance:
Code 39
4 mils: 6-17 cm
20 mils: 4-55 cm
40 mils: 4-85 cm
2.5 mils: 2-6 cm
20 mils: 3-70 cm
40 mils: 3-110 cm
EAN 13
13 mils: 4-48 cm
13 mils: 3-60 cm
PDF-417
10 mils: 2-25 cm
10 mils: 2-30 cm
DataMatrix
7.5 mils: 7-14 cm
10 mils: 4-18 cm
4 mil: 2-6 cm
10 mil: 2-20 cm
a. 13 mils DOF based on EAN. All other 1D codes are Code 39. All labels grade
A,300 lux ambient light, 20°C, label inclination 10°
22
PowerScan™ PBT9500
Technical Specifications
Decode Capability
1D Bar Codes
GS1 Databar linear codes, UPC/EAN (A,E,13,8), UPC/EAN with P2/
P5 Addons, UPC/EAN Coupons, ISBN, Code128, EAN128, ISBT128,
Code39, Code39 Full ASCII, Code39 CIP, Code 32, Codabar, Interleaved 2 of 5, IATA, Industrial 2 of 5, Standard 2 of 5, Code11, MSI,
Plessey, Code 93, Follet 2/5
2D / Stacked Codes
DataMatrix, MaxiCode and QR Codes (QR, Micro QR and Multiple
QR codes), Aztec
- Postal codes including:
Australian Post, China Post, Japanese Post, KIX Post, Planet Code,
Postnet, Royal Mail Code(RM45CC), IMB
- stacked codes including EAN/JAN Composites; GS1 Databar
Composites, GS1 Databar Expanded Stacked; GS1 DataBar
Stacked; GS1 DataBar Stacked Omnidirectional; MacroPDF; Micro
PDF417; PDF417; UPC A/E Composites, French CIP13, Grid
Matrix(Chinese) code
Interfaces Supported
RS-232, Keyboard Wedge, and USB.
USER ENVIRONMENT
Operating Temperature
-4° to 122° F (-20° - +50° C )
Storage Temperature
-40° to 158° F (-40° to 70° C)
Humidity
0 to 95% non-condensing
Drop Specifications
Scanner withstands >50 times 6.5' (2 m)
drops to concrete
Ambient Light
Immunity
100,000 Lux
Contaminants:
Spray/rain,
Dust/particulates
IP65
ESD Level
20 KV
Quick Reference Guide
23
Technical Specifications
Beeper/Speaker
>= 80 dB @ 10 cm
REGULATORY
Electrical Safety
UL 60950, CSA C22.2 No. 60950, IEC
60950
EMI/RFI
North America (FCC) : Canada ( IC); Russia
( Gost); European Union R&TTE Directive;
Japan; Korean KCC; Taiwan; Australia;
Mexico
Laser Class Safety
IEC Class 2
Radiation 1 mW Avg., Emitted wavelength 650 nm, 12ms
pulse, Beam Divergence 8.4 deg x 8.1 deg
RADIO FEATURES
Frequency working
center
2400 to 2483.5 MHz
Range (in open air)
up to 100m
Max number of
devices per base station
24
7
PowerScan™ PBT9500
LED and Beeper Indications
LED and Beeper Indications
The reader’s beeper sounds and its LED illuminates to
indicate various functions or errors on the reader. An
optional “Green Spot” also performs useful functions. The
following tables list these indications. One exception to
the behaviors listed in the tables is that the reader’s functions are programmable, and so may or may not be turned
on. For example, certain indications such as the power-up
beep can be disabled using programming bar code labels.
Table 2. Normal Operating Indicators
INDICATION
DESCRIPTION
LED
BEEPER
Power-up
Beep
The reader is in
the process of N/A
powering-up.
Reader beeps
four times at
highest frequency and volume upon powerup.
Good Read
Beep
LED behavior is
configurable via
A label has been the feature
successfully
“Good Read:
scanned by the When to Indireader.
cate” (see the
PRG for information.)
The reader will
beep once at current frequency,
volume, tonal
setting and duration upon a successful label
scan.
Upon successful read of a
Green Spota label, the softflashes
ware turns the
momentarily green spot on
for the time
specified
N/A
Image
Capture
Blue light
flashes 2 times N/A
when updating
When ready to
capture image
N/A
aExcept when in sleep mode or when a Good Read LED Duration other than 00 is
selected
Quick Reference Guide
25
LED and Beeper Indications
Table 3. Error Indicators
INDICATION
DESCRIPTION
LED
Link Attempt
The reader is trySlow
ing to link to the
Flashes
base
BEEPER
N/A
Reader and Base
Configuration are aligning the
Fast Flashes N/A
Alignment
parameters' configuration
Link
The reader has
successfully
N/A
linked to the base
3 beeps of
ascending frequency
Unlink
The reader has
unlinked from
the base
N/A
3 beeps of
descending frequency
ROM Failure
There is an error
in the reader's
software/programming
Flashes
Reader sounds
one error beep at
highest volume.
Limited
Scanning
Label Read
Indicates that a
host connection
is not established.
N/A
Reader 'chirps' six
times at the highest frequency and
current volume.
Reader
Disabled
The reader has
The LED
been disabled by blinks conthe host.
tinuously
26
N/A
PowerScan™ PBT9500
LED and Beeper Indications
Programming Mode - The following indications ONLY
occur when the reader is in Programming Mode.
INDICATION
DESCRIPTION
LED
BEEPER
Label Programming
Mode Entry
A valid programming label has
been scanned.
LED blinks
continuously
Reader sounds
four low frequency beeps.
Label Programming
Mode Rejection of Label
A label has been
rejected.
N/A
Reader sounds
three times at
lowest frequency and current volume.
Label Programming
Mode Acceptance of Partial Label
In cases where
multiple labels
must be scanned
to program one
feature, this indica- N/A
tion acknowledges
each portion as it is
successfully
scanned.
Reader sounds
one short beep
at highest frequency and current volume.
Label Programming
Mode Acceptance of Programming
Configuration
option(s) have been
successfully programmed via labels N/A
and the reader has
exited Programming Mode.
Reader sounds
one high frequency beep
and 4 low frequency beeps
followed by
reset beeps.
Cancel label has
been scanned.
Reader sounds
two times at
low frequency
and current volume.
Label Programming
Mode Cancel
Item Entry
Quick Reference Guide
N/A
27
Error Codes
Error Codes
Upon startup, if the reader sounds a long tone, this means
the reader has not passed its automatic Selftest and has
entered FRU (Field Replaceable Unit) isolation mode. If the
reader is reset, the sequence will be repeated. Press and
release the trigger to hear the FRU indication code.
The following table describes the LED flashes/beep codes
associated with an error found.
Number
of LED
Flashes/
Beeps
28
Corrective
Action
Error
1
Configuration
2
Interface PCB
6
Digital PCB
11
Imager
Contact Helpdesk for
assistance
PowerScan™ PBT9500
Cleaning
Cleaning
Exterior surfaces and scan windows exposed to spills,
smudges or debris require periodic cleaning to ensure
best performance during scanning.
Use a soft, dry cloth to clean the product. If the product is
very soiled, clean it with a soft cloth moistened with a
diluted non-aggressive cleaning solution or diluted ethyl
alcohol.
Do not use abrasive or aggressive cleansing
agents or abrasive pads to clean scan windows or plastics.
Do not spray or pour liquids directly onto the
CAUTION unit.
Quick Reference Guide
29
Regulatory Information
Regulatory Information
All models are designed to be compliant with rules and
regulations in locations they are sold and will be labeled
as required.
Any changes or modifications to equipment, not expressly
approved by Datalogic could void the user's authority to
operate the equipment.
Statement of Agency Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
FCC RF Radiation Exposure Statement
Exposure to Radio-Frequency Radiation
CAUTION
To comply with FCC RF exposure compliance requirements, for mobile configurations, a separation distance of
at least 20 cm must be maintained between the antenna
of this device and all persons.
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
30
PowerScan™ PBT9500
Quick Reference Guide
X
X
X
⬉䏃ᵓ㒘ӊ
‫ܝ‬ᄺ㒘ӊ
‫ܝ‬ᄺ㒘ӊ
Printed Circuit Board Assembly
Assy, Optics Block
Assy, Module
O
O
O
ᳮ
Mercury
(Hg)
O
O
O
叏
Hexavalent
Chromium
(Cr(VI))
Polybrominated
biphenyls
(PBB)
O
O
O
౐ચ卲
O
O
O
ᄙᄽ侶૖
᦭Ქ᦭ኂ‛凝ᚗర⚛
Cadmium
(Cd)
O
O
O
ᄙᄽԲ૖ㅘ
Polybrominated
diphenyl ethers
(PBDE)
Oઍ⴫ᱝẊㇱઙ⊛ᚲ᦭ဋ凝‫ޗ‬றխࢬܶऱ具Ẋ‫ڶ੅ڶ‬୭ढ凝݁‫܅‬Պխ䦀Գ‫ا‬٥ࡉ㧺ॾஒ䣈䢓ຝᚲ咒ؒ⊛
‫ޝ‬䶣՗ॾஒ䣈঴խ‫ڶ੅ڶ‬୭ढ凝ऱૻၦ૞‫ޣ‬ρ(SJ/T 11363-2006) 億ࡳऱૻၦ‫ޕ‬
X:ઍ⴫ᱝẊㇱઙᚲ↪⊛ဋ凝‫ޗ‬றխ, ⥋ዋ᦭৻㮕᧚ᢱ౔ᚲ฽⊛᦭Ქ᦭ኂ‛凝೏Պխ䦀Գ‫ا‬٥ࡉ㧺ॾஒ䣈䢓ຝᚲ咒ؒ⊛
‫ޝ‬䶣՗ॾஒ䣈঴խ‫ڶ੅ڶ‬୭ढ凝ऱૻၦ૞‫ޣ‬ρ(SJ/T 11363-2006) 億ࡳऱૻ㊂
卋
ㇱઙฬ⒓
PART
Lead
(Pb)
Regulatory Information
China RoHS Table of Restricted Elements (Scanner)
31
32
X
X
⬉䏃ᵓ㒘ӊ
‫ܝ‬ᄺ㒘ӊ
Printed Circuit Board Assembly
Assy, Module
O
O
叏
Hexavalent
Chromium
(Cr(VI))
Polybrominated
biphenyls
(PBB)
O
O
౐ચ卲
O
O
ᄙᄽ侶૖
᦭Ქ᦭ኂ‛凝ᚗర⚛
Cadmium
(Cd)
O
O
ᄙᄽԲ૖ㅘ
Polybrominated
diphenyl ethers
(PBDE)
Oઍ⴫ᱝẊㇱઙ⊛ᚲ᦭ဋ凝‫ޗ‬றխࢬܶऱ具Ẋ‫ڶ੅ڶ‬୭ढ凝݁‫܅‬Պխ䦀Գ‫ا‬٥ࡉ㧺ॾஒ䣈䢓ຝᚲ咒ؒ⊛
‫ޝ‬䶣՗ॾஒ䣈঴խ‫ڶ੅ڶ‬୭ढ凝ऱૻၦ૞‫ޣ‬ρ(SJ/T 11363-2006) 億ࡳऱૻၦ‫ޕ‬
ઍ⴫ᱝẊㇱઙᚲ↪⊛ဋ凝‫ޗ‬றխ, ⥋ዋ᦭৻㮕᧚ᢱ౔ᚲ฽⊛᦭Ქ᦭ኂ‛凝೏Պխ䦀Գ‫ا‬٥ࡉ㧺ॾஒ䣈䢓ຝᚲ咒ؒ⊛
X:
‫ޝ‬䶣՗ॾஒ䣈঴խ‫ڶ੅ڶ‬୭ढ凝ऱૻၦ૞‫ޣ‬ρ(SJ/T 11363-2006) 億ࡳऱૻ㊂
O
O
ᳮ
卋
ㇱઙฬ⒓
PART
Mercury
(Hg)
Lead
(Pb)
Regulatory Information
China RoHS Table of Restricted Elements (Base)
PowerScan™ PBT9500
Regulatory Information
Imager Labeling
Aiming System
The PowerScan™ aiming system meets the Class 2
requirements for laser safety. The laser information is
located on the sides of the Scanner as shown below.
Sample labels are shown here to illustrate their location
only. Please view the labels on your product for actual
details, as they may vary from those depicted.
Scanner Regulatory Labels
Aiming System
Output Window
I
D
F
E
LA LUCE
LASER È VISIBILE
ALL'OCCHIO
UMANO E
VIENE
EMESSA
DALLA FINESTRA INDICATA NELLA
FIGURA.
DIE LASERSTRAHLUNG IST
FÜR DAS MENSCHLICHE AUGE
SICHTBAR UND
WIRD AM
STRAHLAUS
TRITTSFENSTER
AUSGESENDET
(SIEHE BILD)
LE RAYON
LASER EST
VISIBLE À
L'OEIL NU ET IL
EST ÉMIS PAR
LA FENÊTRE
DÉSIGNÉE SUR
L'ILLUSTRATION DANS LA
FIGURE
A LUZ LÁSER
ES VISIBLE AL
OJO HUMANO
Y ES EMITIDA
POR LA VENTANA INDICADA EN LA
FIGURA.
Quick Reference Guide
33
Regulatory Information
I
LUCE LASER
NON FISSARE
IL FASCIO
APPARECCHIO LASER
DI CLASSE 2
MASSIMA
POTENZA
D'USCITA:
LUNGHEZZA
D'ONDA
EMESSA:
CONFORME A
EN 60825-1
(2007)
D
F
E
LASERSTRAHLUNG NICHT IN
DEN STRAHL
BLICKEN PRODUKT DER
LASERKLASSE 2
MAXIMALE AUSGANGSLEISTUNG:
WELLENLÄGE:
ENTSPR. EN
60825-1 (2007)
RAYON LASER
EVITER DE
REGARDER LE
RAYON APPAREIL LASER DE
CLASSE 2
PUISSANCE DE
SORTIE:
LONGUEUR
D'ONDE EMISE:
CONFORME A
EN 60825-1
(2007)
RAYO LÁSER
NO MIRAR
FIJO EL RAYO
APARATO
LÁSER DE
CLASE 2 MÁXIMA POTENCIA DE SALIDA:
LONGITUD DE
ONDA EMITIDA:
CONFORME A
EN 60825-1
(2007)
ENGLISH
The following information is provided to comply with the
rules imposed by international authorities and refers to
the correct use of your terminal.
STANDARD LASER SAFETY REGULATIONS
This product conforms to the applicable requirements of
both CDRH 21 CFR 1040 and EN 60825-1 at the date of
manufacture.
For installation, use and maintenance, it is not necessary
to open the device.
WARNING
Use of controls or adjustments or performance of procedures other than those
specified herein may result in exposure to
hazardous visible laser light.
The product utilizes a low-power laser diode. Although
staring directly at the laser beam momentarily causes no
known biological damage, avoid staring at the beam as
one would with any very strong light source, such as the
sun. Avoid that the laser beam hits the eye of an observer,
even through reflective surfaces such as mirrors, etc.
34
PowerScan™ PBT9500
Regulatory Information
ITALIANO
Le seguenti informazioni vengono fornite dietro direttive
delle autorità internazionali e si riferiscono all’uso corretto
del terminale.
NORMATIVE STANDARD PER LA SICUREZZA LASER
Questo prodotto risulta conforme alle normative vigenti
sulla sicurezza laser alla data di produzione: CDRH 21 CFR
1040 e EN 60825-1.
Non si rende mai necessario aprire l’appa-recchio per
motivi di installazione, utilizzo o manutenzione.
ATTENZIONE
L'utilizzo di procedure o regolazioni differenti da quelle descritte nella documentazione
può
provocare
un'esposizione pericolosa a luce laser
visibile.
Il prodotto utilizza un diodo laser a bassa potenza. Sebbene non siano noti danni riportati dall’occhio umano in
seguito ad una esposizione di breve durata, evitare di fissare il raggio laser così come si eviterebbe qualsiasi altra
sorgente di luminosità intensa, ad esempio il sole. Evitare
inoltre di dirigere il raggio laser negli occhi di un osservatore, anche attraverso superfici riflettenti come gli specchi.
DEUTSCH
Die folgenden Informationen stimmen mit den Sicherheitshinweisen überein, die von internationalen Behörden
auferlegt wurden, und sie beziehen sich auf den korrekten
Gebrauch vom Terminal.
NORM FÜR DIE LASERSICHERHEIT
Dies Produkt entspricht am Tag der Herstellung den gültigen EN 60825-1 und CDRH 21 CFR 1040 Normen für die
Lasersicherheit.
Quick Reference Guide
35
Regulatory Information
Es ist nicht notwendig, das Gerät wegen Betrieb oder
Installations-, und Wartungs-Arbeiten zu öffnen.
ACHTUNG
Jegliche Änderungen am Gerät sowie
Vorgehensweisen, die nicht in dieser
Betriebsanleitung beschreiben werden,
können ein gefährliches Laserlicht verursachen.
Der Produkt benutzt eine Laserdiode. Obwohl zur Zeit
keine Augenschäden von kurzen Einstrahlungen bekannt
sind, sollten Sie es vermeiden für längere Zeit in den
Laserstrahl zu schauen, genauso wenig wie in starke
Lichtquellen (z.B. die Sonne). Vermeiden Sie es, den Laserstrahl weder gegen die Augen eines Beobachters, noch
gegen reflektierende Oberflächen zu richten.
FRANÇAIS
Les informations suivantes sont fournies selon les règles
fixées par les autorités internationales et se réfèrent à
une correcte utilisation du terminal.
NORMES DE SECURITE LASER
Ce produit est conforme aux normes de sécurité laser en
vigueur à sa date de fabrication: CDRH 21 CFR 1040 et EN
60825-1.
Il n’est pas nécessaire d’ouvrir l’appareil pour l’installation,
l’utilisation ou l’entretien.
ATTENTION
L'utilisation de procédures ou réglages différents de ceux donnés ici peut entraîner
une dangereuse exposition à lumière laser
visible.
Le produit utilise une diode laser. Aucun dommage aux
yeux humains n’a été constaté à la suite d’une exposition
au rayon laser. Eviter de regarder fixement le rayon,
comme toute autre source lumineuse intense telle que le
soleil. Eviter aussi de diriger le rayon vers les yeux d’un
observateur, même à travers des surfaces réfléchissantes
(miroirs, par exemple).
36
PowerScan™ PBT9500
Regulatory Information
ESPAÑOL
Las informaciones siguientes son presentadas en conformidad con las disposiciones de las autoridades internacionales y se refieren al uso correcto del terminal.
NORMATIVAS ESTÁNDAR PARA LA SEGURIDAD LÁSER
Este aparato resulta conforme a las normativas vigentes
de seguridad láser a la fecha de producción: CDRH 21 CFR
1040 y EN 60825-1.
No es necesario abrir el aparato para la instalación, la utilización o la manutención.
ATENCIÓN
La utilización de procedimientos o regulaciones diferentes de aquellas describidas
en la documentación puede causar una
exposición peligrosa a la luz láser visible.
El aparato utiliza un diodo láser a baja potencia. No son
notorios daños a los ojos humanos a consecuencia de una
exposición de corta duración. Eviten de mirar fijo el rayo
láser así como evitarían cualquiera otra fuente de luminosidad intensa, por ejemplo el sol. Además, eviten de dirigir
el rayo láser hacia los ojos de un observador, también a
través de superficies reflectantes como los espejos.
CAUTION
The PowerScan™ Handheld Reader is not
user-serviceable. Opening the case of the
unit can cause internal damage and will void
the warranty.
Quick Reference Guide
37
Regulatory Information
WEEE Statement
Waste Electrical and Electronic Equipment
(WEEE) Statement
English
For information about the disposal of Waste Electrical
and Electronic Equipment (WEEE), please refer to the
website at www.datalogic.com.
Italian
Per informazioni sullo smaltimento delle
apparecchiature elettriche ed elettroniche consultare il
sito Web www.datalogic.com.
French
Pour toute information relative à l’élimination des
déchets électroniques (WEEE), veuillez consulter le site
internet www.datalogic.com.
German
Informationen zur Entsorgung von Elektro- und
Elektronik- Altgeräten (WEEE) erhalten Sie auf der
Webseite www.datalogic.com.
Spanish
Si desea información acerca de los procedimientos para
el desecho de los residuos del equipo eléctrico y
electrónico (WEEE), visite la página Web
www.datalogic.com.
Portuguese
Para informações sobre a disposição de Sucatagem de
Equipamentos Elétricos e Eletrônicos (WEEE -Waste
Electrical and Electronic Equipment), consultar o site
web www.datalogic.com.
Chinese
有关处理废弃电气电子设备 (WEEE) 的信息, 请参考
Datalogic 公司的网站 www.datalogic.com/。
Japanese
廃電気電子機器 (WEEE) の処理についての関連事
項は Datalogic のサイト www.datalogic.com をご参
照下さい。
38
PowerScan™ PBT9500
Datalogic ADC Limited Factory Warranty
Datalogic ADC Limited Factory
Warranty
Warranty Coverage
Datalogic warrants to Customer that Datalogic's products will be
free from defects in materials and workmanship for a period of
one year from product shipment. Datalogic (“Datalogic”) hardware products are warranted against defects in material and
workmanship under normal and proper use. The liability of Datalogic under this warranty is limited to furnishing the labor and
parts necessary to remedy any defect covered by this warranty
and restore the product to its normal operating condition. Repair
or replacement of product during the warranty does not extend
the original warranty term. Products are sold on the basis of
specifications applicable at the time of manufacture and Datalogic has no obligation to modify or update products once sold.
If Datalogic determines that a product has defects in material or
workmanship, Datalogic shall, at its sole option repair or replace
the product without additional charge for parts and labor, or credit or refund the defective products duly returned to Datalogic. To
perform repairs, Datalogic may use new or reconditioned parts,
components, subassemblies or products that have been tested
as meeting applicable specifications for equivalent new material
and products. Customer will allow Datalogic to scrap all parts removed from the repaired product. The warranty period shall extend from the date of shipment from Datalogic for the duration
published by Datalogic for the product at the time of purchase
(Warranty period). Datalogic warrants repaired hardware devices
against defects in workmanship and materials on the repaired
assembly for a 90 day period starting from the date of shipment
of the repaired product from Datalogic or until the expiration of
the original warranty period, whichever is longer. Datalogic does
not guarantee, and it is not responsible for, the maintenance of,
damage to, or loss of configurations, data, and applications on the
repaired units and at its sole discretion can return the units in the
“factory default” configuration or with any software or firmware
update available at the time of the repair (other than the firmware or software installed during the manufacture of the product). Customer accepts responsibility to maintain a back up copy
of its software and data.
Warranty Claims Process
In order to obtain service under the Factory Warranty, Customer
must notify Datalogic of the claimed defect before the expiration
of the applicable Warranty period and obtain from Datalogic a return authorization number (RMA) for return of the product to a
designated Datalogic service center. If Datalogic determines Customer’s claim is valid, Datalogic will repair or replace product
without additional charge for parts and labor. Customer shall be
responsible for packaging and shipping the product to the designated Datalogic service center, with shipping charges prepaid.
Datalogic shall pay for the return of the product to Customer if
the shipment is to a location within the country in which the DaQuick Reference Guide
39
Datalogic ADC Limited Factory Warranty
talogic service center is located. Customer shall be responsible
for paying all shipping charges, duties, taxes, and any other
charges for products returned to any other locations. Failure to
follow the applicable RMA policy, may result in a processing fee.
Customer shall be responsible for return shipment expenses for
products which Datalogic, at its sole discretion, determines are
not defective or eligible for warranty repair.
Warranty Exclusions
The Datalogic Factory Warranty shall not apply to:
(i) any product which has been damaged, modified, altered,
repaired or upgraded by other than Datalogic service personnel or its authorized representatives;
(ii) any claimed defect, failure or damage which Datalogic
determines was caused by faulty operations, improper
use, abuse, misuse, wear and tear, negligence, improper
storage or use of parts or accessories not approved or
supplied by Datalogic;
(iii) any claimed defect or damage caused by the use of product with any other instrument, equipment or apparatus;
(iv) any claimed defect or damage caused by the failure to
provide proper maintenance, including but not limited to
cleaning the upper window in accordance with product
manual;
(v) any defect or damage caused by natural or man-made
disaster such as but not limited to fire, water damage,
floods, other natural disasters, vandalism or abusive
events that would cause internal and external component damage or destruction of the whole unit, consumable items;
(vi) any damage or malfunctioning caused by non-restoring
action as for example firmware or software upgrades,
software or hardware reconfigurations etc.;
(vii) the replacement of upper window/cartridge due to
scratching, stains or other degradation and/or
(viii) any consumable or equivalent (e.g., cables, power supply,
batteries, keypads, touch screen, triggers etc.).
No Assignment
Customer may not assign or otherwise transfer its rights or obligations under this warranty except to a purchaser or transferee
of product. No attempted assignment or transfer in violation of
this provision shall be valid or binding upon Datalogic.
DATALOGIC'S LIMITED WARRANTY IS IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, ORAL OR WRITTEN, STATUTORY OR OTHERWISE, INCLUDING, WITHOUT LIMITATION, ANY
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, OR NONINFRINGEMENT. DATALOGIC
SHALL NOT BE LIABLE FOR ANY DAMAGES SUSTAINED BY CUSTOMER ARISING FROM DELAYS IN THE REPLACEMENT OR REPAIR OF PRODUCTS UNDER THE ABOVE. THE REMEDY SET
FORTH IN THIS WARRANTY STATEMENT IS THE CUSTOMER’S
SOLE AND EXCLUSIVE REMEDY FOR WARRANTY CLAIMS. UNDER
NO CIRCUMSTANCES WILL DATALOGIC BE LIABLE TO CUSTOMER
40
PowerScan™ PBT9500
Ergonomic Recommendations
OR ANY THIRD PARTY FOR ANY LOST PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL IN-DIRECT, SPECIAL OR CONTINGENT
DAMAGES REGARDLESS OF WHETHER DATALOGIC HAD ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.
Risk of Loss
Customer shall bear risk of loss or damage for product in transit
to Datalogic. Datalogic shall assume risk of loss or damage for
product in Datalogic’s possession. In the absence of specific written instructions for the return of product to Customer, Datalogic
will select the carrier, but Datalogic shall not thereby assume any
liability in connection with the return shipment.
Ergonomic Recommendations
CAUTION
In order to avoid or minimize the potential risk
of ergonomic injury follow the recommendations below. Consult with your local Health &
Safety Manager to ensure that you are adhering to your company’s safety programs to prevent employee injury.
•
Reduce or eliminate repetitive motion
•
Maintain a natural position
•
Reduce or eliminate excessive force
•
Keep objects that are used frequently within
easy reach
•
Perform tasks at correct heights
•
Reduce or eliminate vibration
•
Reduce or eliminate direct pressure
•
Provide adjustable workstations
•
Provide adequate clearance
•
Provide a suitable working environment
•
Improve work procedures.
Quick Reference Guide
41
Services and Support
Services and Support
Datalogic provides several services as well as technical
support through its website. Log on to www.datalogic.
com and click on the links indicated for further information.
PRODUCTS
Search through the links to arrive at your product page
where you can download specific Manuals and Software &
Utilities, including:
•
Datalogic Aladdin™, a multi-platform utility program that allows device configuration using a PC. It
provides RS-232 and USB-COM interface configuration, printing of configuration bar codes, and
firmware upgrades.
SERVICE & SUPPORT
•
Technical Support - Product documentation and
programming guides and Technical Support
Department in the world
•
Service Programs - Warranty Extensions and
Maintenance Agreements
•
Repair Services - Flat Rate Repairs and Return
Material Authorization (RMA) Repairs
•
Downloads – Manuals & Documentation, Data
Sheets, Product Catalogs, etc.
CONTACT US
•
42
Information Request Form and Sales & Service
Network
PowerScan™ PBT9500
Hex-Numeric Keypad
Hex-Numeric Keypad
Use the barcodes that follow to enter numbers as you
would select digits/characters from a keypad.
0
1
2
3
4
5
Quick Reference Guide
43
Hex-Numeric Keypad
Hex-Numeric Keypad (continued)
6
7
8
9
A
B
44
PowerScan™ PBT9500
Hex-Numeric Keypad
Hex-Numeric Keypad (continued)
C
D
E
F
For HID Variable Pin Code only
If you make a mistake, scan the CANCEL barcode below
to abort and not save the entry string. You can then
restart.
Cancel an incomplete HID Variable PIN Code
Finish by scanning the Exit HID Variable PIN Code label.
Exit HID Variable PIN Code
Quick Reference Guide
45
Hex-Numeric Keypad
NOTES
46
PowerScan™ PBT9500
Hex-Numeric Keypad
NOTES
Quick Reference Guide
47
Hex-Numeric Keypad
NOTES
48
PowerScan™ PBT9500
DECLARATION OF CONFORMITY
13
Datalogic ADC Srl, Via S. Vitalino, 13
Lippo di Calderara di Reno (BO) 40012 Italy
EC-100
Rev.: 1
Pag.: 1 di 1
La presente dichiarazione di conformità è rilasciata sotto la responsabilità esclusiva di
Datalogic ADC Srl per:
This Declaration of Conformity is issued under the sole responsibility of Datalogic ADC Srl
for:
Cette déclaration de conformité est établie sous la seule responsabilité de Datalogic Srl
pour:
Diese Konformitätserklärung wird unter der alleinigen Verantwortung des Datalogic ADC
Srl erteilt für:
Esta declaración de conformidad se expide bajo la exclusiva responsabilidad de Datalogic
ADC Srl para:
PowerScan PBT9500 ; Cordless Barcode Reader
BC9XY0-BT ; Cordless Base Station/Charger
e tutti i suoi modelli
and all its models
et tous ses modèles
und seine Modelle
y todos sus modelos
sono conformi alle Direttive del Consiglio Europeo sottoelencate:
are in conformity with the requirements of the European Council Directives listed below:
sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous:
den nachstehenden angeführten Direktiven des Europäischen Rats:
cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:
1999/5/EC - R&TTE Directive
2011/65/EU - RoHS Directive
Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:
This declaration is based upon compliance of the products to the following standards:
Cette déclaration repose sur la conformité des produits aux normes suivantes:
Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:
Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:
ETSI EN 301 489-17 V2.1.1,
MAY 2009 :
ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM
MATTERS (ERM); ELECTROMAGNETIC COMPATIBILITY (EMC)
STANDARD FOR RADIO EQUIPMENT; PART 17: SPECIFIC CONDITIONS FOR BROADBAND DATA TRANSMISSION SYSTEMS
ETSI EN 300 328-3 V1.7.1,
OCTOBER 2006:
ELECTROMAGNETIC COMPATIBILITY AND RADIO SPECTRUM
MATTERS (ERM); WIDEBAND TRANSMISSION SYSTEMS;DATA
TRANSMISSION EQUIPMENT OPERATING IN THE 2,4 GHZ ISM
BAND AND USING WIDE BAND MODULATION TECHNIQUES;
HARMONIZED EN COVERING ESSENTIAL REQUIREMENTS
UNDER ARTICLE 3.2 OF THE R&TTE DIRECTIVE
EN 60950-1, DECEMBER 2006 + INFORMATION TECHNOLOGY EQUIPMENT - SAFETY AMENDMENT A11:2009 +
PART 1 : GENERAL REQUIREMENTS
AMENDMENT A1:2010 +
AMENDMENT A12:2011 :
EN 50581, SEPTEMBER 2012 :
Lippo di Calderara,
August 29th , 2013
TECHNICAL DOCUMENTATION FOR THE ASSESSMENT OF ELECTRICAL AND ELECTRONIC PRODUCTS WITH RESPECT TO THE
RESTRICTION OF HAZARDOUS SUBSTANCES
RUGGERO CACIOPPO
QUALITY & RELIABILITY MANAGER - EUROPE
www.datalogic.com
©2013 Datalogic, Inc. • All rights reserved.
Datalogic and the Datalogic logo are registered trademarks
of Datalogic S.p.A. in many countries, including the U.S.A.
and the E.U.
Datalogic ADC, Inc.
959 Terry Street | Eugene |OR 97402 | USA
Telephone: (1) 541-683-5700 | Fax: (1) 541-345-7140
820049014
Rev A
Sept 2013