GSM/GPRS/GPS Tracker
GT200
User Manual
TRACGT200UM002
Revision: 2.01
http://www.queclink.com
sales@queclink.com
GT200 User Manual
Document Title
GT200 User Manual
Version
2.01
Date
2009-09-11
Status
Release
Document Control ID
TRACGT200UM002
General Notes
Queclink offers this information as a service to its customers, to support application and
engineering efforts that use the products designed by Queclink. The information provided is
based upon requirements specifically provided to Queclink by the customers. Queclink has
not undertaken any independent search for additional relevant information, including any
information that may be in the customer’s possession. Furthermore, system validation of this
product designed by Queclink within a larger electronic system remains the responsibility of
the customer or the customer’s system integrator. All specifications supplied herein are
subject to change.
k
n
i
l
l
a
c
i
t
e
n
u
e
Q fid
n
o
C
Copyright
This document contains proprietary technical information which is the property of Queclink
Limited., copying of this document and giving it to others and the using or communication of
the contents thereof, are forbidden without express authority. Offenders are liable to the
payment of damages. All rights reserved in the event of grant of a patent or the registration of
a utility model or design. All specification supplied herein are subject to change without
notice at any time.
Copyright © Queclink Wireless Solutions Ltd. 2009
TRACGT200UM002
-1-
GT200 User Manual
Contents
Contents ............................................................................................................................................2
0. Revision history ............................................................................................................................3
1. Introduction...................................................................................................................................4
2. Getting Started ..............................................................................................................................5
2.1. Parts List..............................................................................................................................5
2.2. Battery Charging .................................................................................................................5
2.3. Install SIM Card ..................................................................................................................6
3. Product Overview .........................................................................................................................7
3.1. Appearance..........................................................................................................................7
3.2. Keypad and MINI USB Interface Description ....................................................................7
3.3. LED Indicator Description ..................................................................................................8
4. Basic Function...............................................................................................................................9
4.1. Turning GT200 On or Off ...................................................................................................9
4.2. Number Key Dial Call.........................................................................................................9
4.3. Make An Emergency Call ...................................................................................................9
4.4. Volume Adjust and State Switch .......................................................................................10
4.5. Key-Press Lock .................................................................................................................10
4.6. Normal State and Silent State............................................................................................ 11
5. Troubleshooting and Safety info .................................................................................................12
5.1. Troubleshooting.................................................................................................................12
5.2. Safety info .........................................................................................................................13
k
n
i
l
l
a
c
i
t
e
n
u
e
Q fid
n
o
C
TRACGT200UM002
-2-
GT200 User Manual
0. Revision history
Revision
Date
Author
Description of change
2.01
2009-09-29
Ella HUANG
Initial
k
n
i
l
l
a
c
i
t
e
n
u
e
Q fid
n
o
C
TRACGT200UM002
-3-
GT200 User Manual
1. Introduction
GT200 is a powerful GPS Locator which is designed for kids care. With superior receiving
sensitivity, fast TTFF and GSM frequencies 850/1800/1900MHz or 900/1800/1900MHz. Its
location can be real time or schedule tracked by backend server or specified terminals. Base on the
embedded @Track protocol the GT200 can communicate with the backend server through
GPRS/GSM network, transfer reports of Emergency, Geo-fencing, Lower power and scheduled
GPS position etc… User can easy to dial the preset phone number by the four quick dial buttons
and SOS button. Service provider can easy to setup their tracking platform base on the functional
@Track protocol.
k
n
i
l
l
a
c
i
t
e
n
u
e
Q fid
n
o
C
TRACGT200UM002
-4-
GT200 User Manual
2. Getting Started
2.1. Parts List
z GT200 Locator
z 850mAh Li-ion battery
z AC power adapter
z
k
n
i
l
l
a
c
i
t
e
n
u
e
Q fid
n
o
C
Mini-USB Data_Cable_M (Please note this data cable is only for backend server developers or
administrators. It is not in the delivery list of GT200)
2.2. Battery Charging
z Please connect AC power adapter with GT200 for battery charging.
z Insert the AC power adapter into a working electrical outlet. .
z During charging, the Battery LED Indicator is blinking slowly. When the battery is full
charged, the Battery LED Indicator will be solid.
z You can also charge the battery by USB cable which connects GT200 with the PC.
z Charging process usually takes about 4 hours.
Note: Before your first time using the GT200, please full charge the battery.
TRACGT200UM002
-5-
GT200 User Manual
2.3. Install SIM Card
z Turn off the GT200; remove the battery cover and battery.
z Move the SIM card slot cover up, pull it up, and insert the SIM card into the SIM card slot
according to the direction shown, then close the cover and pull it down to lock;
z Install the battery and close its cover.
k
n
i
l
l
a
c
i
t
e
n
u
e
Q fid
n
o
C
TRACGT200UM002
-6-
GT200 User Manual
3. Product Overview
3.1. Appearance
k
n
i
l
l
a
c
i
t
e
n
u
e
Q fid
n
o
C
3.2. Keypad and MINI USB Interface Description
Keypad Function description
Power Key
z
Volume +/-Key
z When in voice call, press this key to adjust the volume;
z In idle state, keep pressing the Volume – Key for 3 seconds will switch
between normal and silent state.
Answer Key
z Press a Number Key which preset a phone number by backend server
to make call to the phone number.
z When there is an incoming call, press this key to answer the call.
Hang Up Key
z While in voice call, press this key to end a call.
z When there is an incoming call, press this key to reject the call.
Number
Keys(1,2,3,4)
z In idle state, press Number Key X, then press Answer Key to make the
phone call to the preset phone number.
z In idle state, keep pressing the Number Key X which KPN function is
enabled for 5 seconds, GPS will open and send its position to backend
server.
SOS Key
z
TRACGT200UM002
Hold down this key to turn on / turn off GT200
Keep press this key for at least 2 seconds to dial the SOS number. SOS
function is enabled even in Keypad Locked Mode.
-7-
GT200 User Manual
z
Lock Key
In Fake Power Off Mode and Fake Ghost Mode, keep press this key
for 3 seconds to open GPS and send a position to backend server.
z Take this key up, all keys enable.
z Take this key down, all keys disable, except SOS Key.
z Note: when the key lock function is opened, if there is an incoming
call, Answer key and Hang up key can still be used; while in talking
state, Volume key can be used to adjust the volume and Hang up key
can still be used to end the call.
MINI USB Interface Description
k
n
i
l
l
a
c
i
t
e
n
u
e
Q fid
n
o
C
Mini USB Interface
z Plug in the AC power adapter to this interface for battery charging.
z Backend server developer or administrator can use the Data_Cable_M
to configure GT200.
3.3. LED Indicator Description
There are three LED Indicators in GT200 to indicator different status of GT200. Details as below:
Light
Power LED
Indicator
event
device is in charging
charging completed
State
slow flash
solid
battery is 20% capacity
slow flash 5 times in silent state
battery is 10% capacity
fast flash 10 times in silent state
battery is 5% capacity
GSM LED
Indicator
network searching
network has been registered
fast flash till GT200 shut down in
silent state
fast flash
slow flash
GPS LED
Indicator
SIM pin locked
GPS is in fixing
GPS has fixed
solid
fast flash
solid for 2 seconds
TRACGT200UM002
-8-
GT200 User Manual
4. Basic Function
4.1. Turning GT200 On or Off
z To turn on GT200, please hold down Power key.
z In state of power-on, hold down Power key to turn off GT200.
z Before turn on GT200, please make sure your SIM card is not PIN locked.
k
n
i
l
l
a
c
i
t
e
n
u
e
Q fid
n
o
C
4.2. Number Key Dial Call
z User can preset 4 phone numbers by backend server, each number key corresponding to one
phone number.
z When you want to make a phone call, first press Number Key X, and then press Answer Key
to call this preset phone number.
z Press Hang Up Key to end the call while in dialing process.
z If the call is received, it will be in talking state.
z Press Hang up Key to end the call while in talking state.
4.3. Make An Emergency Call
z At first, user should preset the SOS call number.
z User can keep press SOS key for 3 seconds with any case to dial the SOS call number for help.
At the same time, GT200 will try to get GPS fixing and send the report with position
TRACGT200UM002
-9-
GT200 User Manual
information to backend server.
z Please note, in Fake Power Off Mode or Fake Ghost Mode, keep press SOS key for 3 seconds,
it will only open GPS and send position information to backend server.
k
n
i
l
l
a
c
i
t
e
n
u
e
Q fid
n
o
C
4.4. Volume Adjust and State Switch
z Press volume+/- key to increase or decrease the volume while in talking.
z In idle state, keep pressing the Volume – Key for 3 seconds to switch between normal and
silent state.
4.5. Key-Press Lock
z Take this key up, all keys enable.
z Take this key down, all keys disable, except SOS Key.
z Note: when the keys are locked, if there is an incoming call, Answer key and Hang up key can
still be used. While in talking, Volume key can still be used to adjust the volume and Hang up
key can be used to end the call.
TRACGT200UM002
- 10 -
GT200 User Manual
k
n
i
l
l
a
c
i
t
e
n
u
e
Q fid
n
o
C
z
4.6. Normal State and Silent State
z In normal state, there is a voice notification for incoming call and new protocol massage;
there is a short beep while pressing the key.
z In silent state, there is vibration notification for incoming call and new protocol massage.
z GT200 has different indicator in normal state and silent state.
Event
In Normal State
In Silent State
battery is 20% capacity
long voice notification 3
times
slow flash 5 times for Power
LED Indicator
battery is 10% capacity
long voice notification 1 time
fast flash 10 times for Power
LED Indicator
battery is 5% capacity
a short beep about every 2
minute
fast flash till GT200 shut down
for Power LED Indicator
TRACGT200UM002
- 11 -
GT200 User Manual
5. Troubleshooting and Safety info
5.1. Troubleshooting
Trouble
Possible Reason
Solution
Poor reception
Using the device in an area with poor
reception such as near tall buildings or in
a basement where radio waves cannot be
transmitted.
Try to avoid
Related to the distance from the base
station built by the network.
You can request that the
network service provider
provide a service area plan.
Expired SIM card
Contact your network provider.
Outside the GSM service area
Consult your network provider
on the service area.
Poor signal.
Please move to a place with a
better signal and try again.
The SIM card in GT200 doesn’t support
GPRS.
Try a GPRS supported SIM
card.
APN is wrong. Some APN can not visit
the internet directly.
Ask the network operator for
the right APN.
The IP address or port of the backend
server is wrong.
Make sure the IP address for
the backend server is an
identified address in the
internet.
The GPS signal is weak.
Please move GT200 to a place
with open sky.
k
n
i
l
l
a
c
i
t
e
n
u
e
Q fid
n
o
C
Unable to connect
with the network
Messages can’t be
reported to the
backend server by
GPRS.
GT200 can’t get
successful GPS
fixing.
It is better to let the top surface
face to sky. (The same surface
with LED indicator)
GT200 will stop GPS if it can’t
get GPS fixing in 2 minutes
(except in emergency mode).
So please make sure the GPS
signal is good enough when
doing the first time of GPS
fixing.
Unable to power off
GT200.
TRACGT200UM002
The keypad has been locked.
Put the lock keypad key to
unlocked mode.
- 12 -
GT200 User Manual
No response from
UART when
configure GT200
through UART
GT200 is in power saving mode.
Remove the Data_Cable_M,
and plug it in again. After this
operation, GT200 will exit
from power saving mode for 10
seconds.
5.2. Safety info
z
z
z
z
z
z
z
z
Please do not immerse the device in liquids.
Please do not store the device in wet, dirty or dusty environments.
Please do not expose the device to extreme temperatures.
Please do not place the phone in or near microwave emitting devices.
Please do not operate or store the device near flammable materials.
Please do not use the device in restricted areas without permission.
Avoid dropping, throwing or putting heavy pressure on the device.
Please do not attempt to, or actually open, or alter the device or any of its accessories from its
casing in any way.
z Only use authorized approved accessories with the device.
k
n
i
l
l
a
c
i
t
e
n
u
e
Q fid
n
o
C
TRACGT200UM002
- 13 -