Apple CPX1 User`s manual

00CP-X885WBasic-四 02.10.7 6:55 PM ページ2
Liquid Crystal Projector
CP-X880/CP-X885
(CP-X880W/CP-X885W)
USER'S MANUAL Vol.1 Basic
Please read this user's manual thoroughly to ensure correct usage through understanding.
ENGLISH
DEUTSCH
BEDIENUNGSANLEITUNG Teil 1 Grundlagen
Bitte lessen Sie diese Benutzerhandbuch zugunsten der korrekten Bedienung aufmerksam.
MANUEL D'UTILISATION Vol.1 Fondements
Nous vous recommandons de lire attentivement ce manuel pour bien assimiler le fonctionnement de
l'appareil.
FRANÇAIS
MANUALE D'ISTRUZIONI Vol.1 Informazioni di base
Vi preghiamo voler leggere attentamente il manuale d'istruzioni in modo tale da poter comprendere
quanto riportato ai fini di un corretto utilizzo del proiettore.
ITALIANO
MANUAL DE USUARIO Vol.1 Básico
Lea cuidadosamente este manual del usuario para poder utilizar corretamente el producto.
GEBRUIKSAANWIJZING Vol.1 Basis
ESPAÑOL
Lees voor het qebruik alstublieft deze handleiding aandachtig door, om volledig profijt te hebben van
de uitgebreide mogelijkheden.
BRUKERHÅNDBOK Vol.1 Grunnleggende
Vennligst les denne bruksanvisningen grundig for å være garantert driftssikker bruk.
NEDERLANDS
NSTRUÇÕES DO PROPRIETÁRIO Vol.1 Básico
Para assegurar o uso correto do equipamento, por favor leia atentamente este manual do utilizador.
NORSK
PORTGÊS
中文
REGULATORY
NOTICES
LCD Projector CP-X880/CP-X885
USER'S MANUAL
Vol.2 (Extended)
Thank you for purchasing this projector.
WARNING • Please read the accompanying manual “SAFETY
INSTRUCTIONS” and this “USER'S MANUAL” thoroughly to ensure correct
usage through understanding. After reading, store this instruction manual in a
safe place for future reference.
NOTE • The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual
• The reproduction, transmission or use of this document or contents is not permitted without express
written authority.
TRADEMARK ACKNOWLEDGEMENT :
• PS/2, VGA and XGA are registered trademarks of the International Business Machines Corporation.
• Apple, Mac and ADB are registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
• All other trademarks are the property of their respective owners.
CONTENTS
Page
MULTIFUNCTIONAL SETTINGS ........................................................................2
WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED ......8
SPECIFICATIONS .............................................................................................11
WARRANTY AND AFTER-SERVICE................................................................12
.......................................................................................
For "TECHNICAL" see the end of this manual.
1
MULTIFUNCTIONAL SETTINGS
This device has 8 separate menus: MAIN, PICTURE-1, PICTURE-2, INPUT,
AUTO, SCREEN, OPTION, WIRELESS. Each of these menus is operated using
the same methods. The basic operations of these menus are as follows.
Menu screen display : Press the MENU button.
Menu selection
: Use the lever switch
to select a menu name, then press the
or ENTER button.
to select an item, then press the
or
Item selection
: Use the lever switch
ENTER button.
Return menu to last previous screen: Press the
button or the ESC button.
Execution of settings and/or adjustments: Perform the operation using the lever switch
.
(For further details, read the explanation for each separate menu.)
Initialization of settings and/or adjustments: During operation, press the RESET button.
(Functions that are executed at the same time
as a selection, including H PHASE, LANGUAGE
selection, and ADJUST, will not be reset.)
End menu operations: Press the MENU button, or do not perform any operation for
several seconds.
With the MAIN menu, the seven items shown in the Table below can be
performed.
Perform each operation in accordance with the instructions in the Table.
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
WIRELESS
: SELECT
MAIN Menu
Example : MAIN Menu
(BRIGHT)
MAIN Menu
Item
Adjust Brightness: Light
Dark
CONTRAST
Adjust Contrast: Strong
Weak
PICT.POSIT.
2
Select Aspect Ratio:
At RGB Input or Hi-Vision 1125i(1035i/1080i)/750p of COMPONENT VIDEO
Input:
4:3
16:9
At VIDEO Input, S-VIDEO Input or 525i/525p/625i of COMPONENT VIDEO Input:
4:3
16:9
SMALL
• The SMALL picture may not be displayed correctly with certain input signals.
Select Picture Position (for 16:9/SMALL Picture):
TOP
CENTER
BOTTOM
GAMMA
Select Gamma Mode:
NORMAL
CINEMA
MIRROR
Select Mirror Status:
NORMAL
H:INVERT
LANGUAGE
12
Description
BRIGHT
ASPECT
BRIGHT
CONTRAST
ASPECT
PICT. POSIT.
GAMMA
MIRROR
LANGUAGE
Select Menu Language:
ENGLISH
FRANÇAIS
ITALIANO
NORSK
POTUGUÊS
DYNAMIC
V:INVERT
DEUTSCH
NEDERLANDS
H&V:INVERT
ESPAÑOL
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
WIRELESS
: SELECT
PICTURE-1 Menu
With the PICTURE-1 menu, the five items shown in the Table
below can be performed.
Perform each operation in accordance with the instructions in the
Table.
COLOR BAL R
COLOR BAL B
SHARPNESS
COLOR
TINT
12
Example : PICTURE1 Menu
(COLOR BAL R)
PICTURE-1 Menu
Item
Description
COLOR BAL R
Adjust Red Color Balance: Dark
Light
COLOR BAL B
Adjust Blue Color Balance: Dark
Light
SHARPNESS
COLOR
TINT
Adjust Sharpness (for VIDEO/S-VIDEO): Clear
Soft
Adjust COLOR (for VIDEO/S-VIDEO/COMPONENT VIDEO):
Dark
Light
Adjust Tint (for VIDEO/S-VIDEO): Green
Red
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
WIRELESS
: SELECT
PICTURE-2 Menu
With the PICTURE-2 menu, the five items shown in the Table
below can be performed.
Perform each operation in accordance with the instructions in the
Table.
V POSITION
H POSITION
H PHASE
H SIZE
OVER SCAN
12
Example : PICTURE2 Menu
(V POSITION)
PICTURE-2 Menu
Item
Description
V POSITION
Adjust Vertical Position (for RGB): Up
H POSITION
Adjust Horizontal Position (for RGB): Left
H PHASE
Down
Right
Adjust Horizontal Phase (for RGB/COMPONENT VIDEO):
Right
Left
• Adjust to eliminate flicker.
H SIZE
Adjust Horizontal Size (for RGB): Large
Small
• If the horizontal size adjustment is excessive, the image may not be displayed
correctly. In such a case, initialize H SIZE with the RESET button.
OVER SCAN
Select Over-scan Ratio (for VIDEO/S-VIDEO/COMPONENT VIDEO):
LARGE
MIDDLE
SMALL
• If you select LARGE, you may note streaking on the top and bottom of the
screen, or flicker. If this is irritating, we suggest you select SMALL.
3
MULTIFUNCTIONAL SETTINGS (continued)
INPUT Menu
The three Input menu items listed in the table below can be manipulated. For
RGB input, the reception signal’s horizontal and vertical frequency is displayed
on the initial menu screen. Use the table below as a guide for operation.
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
WIRELESS
: SELECT
BNC
VIDEO
HDTV
SYNC ON G
P. IN P. INPUT
P. IN P. POSIT
RGB
COMPONENT
Example : INPUT Menu
(BNC)
INPUT Menu
Item
Description
BNC Pin (R/CR/PR, G/Y, B/CB/PB, H, V) function selection:
BNC (RGB)
BNC (COMPONENT)
(R) (G) (B) (H) (V)
BNC
(CR/PR) (Y) (CB/PB) ( - ) ( - )
(Pins for RGB)
(Pins for COMPONENT)
Selecting BNC (RGB) allows the 5 RGB2 pins (R/CR/PR, G/Y, B/CB/PB, H, V) to be
used as RGB signal BNC input as-is.
Selecting BNC (COMPONENT) allows the 3 leftmost RGB2 pins (R/CR/PR, G/Y,
B/CB/PB) to be used as the COMPONENT VIDEO input CR/PR, Y, and CB/PB pins.
Select Mode of Signal Type (for VIDEO/S-VIDEO):
AUTO
NTSC
M-PAL
N-PAL
PAL
SECAM
NTSC4.43
When AUTO is selected, the video/ S-video input function under ADJUST ( 5
VIDEO
are enabled, and is
executed simultaneously so that the optimum signal mode is selected from among the modes listed above.
Use this function if the image becomes unstable with VIDEO/S-VIDEO. (e.g. The image becomes irregular, or lacks color.)
• AUTO mode may not function correctly with a PAL60 signal and certain other signals.
• The AUTO mode operation requires approximately 10 seconds.
• For COMPONENT VIDEO, the signal type is identified automatically even if
this function is inactive. For a HDTV signal, refer to the item HDTV below.
HDTV
Select HDTV Signal Mode: 1080i
1035i
• If the selected HDTV mode is incompatible with the input signal, the picture may be distorted.
SYNC ON G
On/Off SYNC ON G Mode: TURN ON
TURN OFF
Selecting TURN ON turns on the SYNC ON G mode. The SYNC ON G mode
allows reception of SYNC on G.
• In the SYNC ON G mode, the picture may be distorted with certain input
signals. In such a case, remove the signal connector so that no signal is
received and turn SYNC ON G off, and then reconnect the signal.
P. IN P. INPUT
P. IN P. screen (*) input signal selection: VIDEO
Selects the signal displayed on the P. IN P. subscreen.
S-VIDEO
P. IN P. screen (*) display position selection:
P. IN P. POSIT
Selects the position at which the P. IN P. subscreen is displayed.
(*) The P. IN P. (picture-in-picture) function displays the video signal image in a subscreen (P. IN P. screen) on
top of the screen on which the RGB signal image is being displayed. (See “Displaying Child Window” Vol.1
24 .)
4
AUTO Menu
With the AUTO menu, the four items shown in the Table below can
be performed.
Please perform each operation in accordance with the instructions
in the Table.
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
WIRELESS
: SELECT
ADJUST
KEYSTONE
POWER OFF
ONE TOUCH
EXECUTE
Example : AUTO Menu
(ADJUST)
AUTO Menu
Item
Description
ADJUST
Auto Adjust (for RGB): Automatically adjusts H POSITION, V POSITION, H
PHASE, and H SIZE. Use this function with the maximum window size.
Auto Adjust (for VIDEO/S-VIDEO): This function automatically selects the
appropriate signal mode depending on input signals. This is only performed if
AUTO is selected on the VIDEO menu item ( 4 ) of the INPUT menu.
• This function may not be available with a PAL60 signal and certain other
signals.
• The AUTO mode operation requires approximately 10 seconds.
• For COMPONENT VIDEO, the signal type is identified automatically even if this
function is inactive. For more information on HDTV signals, see HDTV. ( 4 )
KEYSTONE
Automatic keystone distortion correction:
You can automatically correct vertical keystone distortion corresponding to the
angle (forward/backward tilt) at which the unit is set up.
• If the projection screen is inclined, or if the projector is angled downwards, it
may not be possible to make the correct adjustment when V: INVERT or H&V:
INVERT is selected under the MIRROR item of the MAIN menu.
• When the zoom adjustment is set to the TELE side, automatic correction may
be excessive. The automatic correction function should be used with zoom
set to WIDE whenever possible.
POWER OFF
ONE TOUCH
Adjust POWER OFF Time:
Long (MAX. 99 min.)
Short (Min. 1 min.)
(DISABLE: 0 min.)
If the time set here passes without valid signal input (there is no signal input, or
signal input is out of specifications), the standby mode is set (see "TURNING
ON THE POWER" Vol.1 15 ). This function is inactive when DISABLE (0 min.) is
selected.
Enabling/disabling the KEYSTONE
function using the ONE TOUCH
button:
TURN ON
TURN OFF
Pressing the ONE TOUCH button will automatically retrieve pictures and
automatically adjust the screen (see “ADJUSTING SCREEN WITH ONETOUCH” Vol.1 23 ), and you can also set the function to execute KEYSTONE
(see above in this table) simultaneously when pressed. KEYSTONE will be
executed if TURN ON is selected.
5
MULTIFUNCTIONAL SETTINGS (continued)
SCREEN Menu
With the SCREEN menu, the five items shown in the Table below can be performed.
Please perform each operation in accordance with the instructions in the Table.
BLANK
START UP
MyScreen
MyScreen Size
MyScreen Lock
MyScreen
ORIGINAL
Example : SCREEN Menu
(BLANK)
SCREEN Menu
Item
Description
BLANK
Selection of BLANK Screen:
MyScreen
ORIGINAL
.
.
.
.
.
.
The BLANK Screen may be voluntarily selected. The BLANK Screen is displayed when the screen
has been erased (i.e., made to vanish) by manipulating the BLANK button (please refer to the
“Temporarily Blanking the Screen” section of the separate booklet, Vol. 1 (Basic)).
MyScreen: Using the MyScreen category (see this Table, below), one can register a desired screen
(or screens). At the time of factory shipment, this is set as a non-patterned (plain) blue color screen.
ORIGINAL: Existing standard screens. Please make confirmation using the actual screen(s).
Option screens: Various colored non-patterned (plain) screens displayed within the Menus.
• The MyScreen and the ORIGINAL Screen will each change to a non-patterned (plain) black color
screen several minutes after being displayed.
START UP
MyScreen
6
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
WIRELESS
: SELECT
Selection of START UP Screen: MyScreen
ORIGINAL
TURN OFF
The START UP Screen may be voluntarily selected. The START UP Screen is displayed when
no signal has been inputted, or when spec signals are being inputted.
MyScreen: Using the MyScreen category (see this Table, below), one can register a desired screen
(or screens). At the time of factory shipment, this is set as a non-patterned (plain) blue color screen.
ORIGINAL: Existing standard screens. Please make confirmation using the actual screen(s).
TURN OFF: A non-patterned (plain) blue color screen.
• The MyScreen and ORIGINAL screens will switch to the BLANK screen (see above in this
table) a few minutes after being displayed. If the BLANK screen is the MyScreen or
ORIGINAL screen, it will turn immediately to a solid black screen.
Registration of MyScreen:
When this item is executed, the MyScreen Menu for registration of MyScreen for the BLANK Screen
and the START UP Screen is displayed. When operations are performed in accordance with this Menu,
one can “cut” and register desired screens from among the received images within the display.
1. After the “Do you start capturing this picture?” message has been displayed, pressing the ESC (or
RESET) button interrupts execution of the MyScreen. When the ENTER button is pressed, the picture
becomes static (no longer moves), and a frame for picture cutting, as well as the message that follows
below, appear. Please press the button when the screen you want to register is currently being displayed.
2. When the “Move the capture area as you want.” message has been displayed, pressing the ESC (or RESET)
button will eliminate the static state of the picture, and operations can be performed again from operation 1.
The frame can be moved using the
buttons. After designating the screen you
want to register, pressing the ENTER button will initiate screen registration. The registration
process takes approximately 1 minute to complete.
3. When the registration has been completed, the screen of the registered MyScreen, plus the
message, “MyScreen registration is finished,” will be displayed for several seconds, after which
the operation is terminated.
MyScreen Size
Selection of MyScreen display size: x1
MyScreen Lock
Invalidation of MyScreen registration function: TURN ON
TURN OFF
When TURN ON is selected, the MyScreen category (see this Table, above) cannot be executed; in
this way, one can prohibit rewrites (“writeovers”) of the MyScreen.
FULL
OPTION Menu
With the OPTION menu, the five items shown in the Table below can
be performed.
Please perform each operation in accordance with the instructions in
the Table.
OPTION Menu
Item
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
WIRELESS
: SELECT
VOLUME
WHISPER
IR REMOTE
LAMP TIME
FILTER TIME
12
Example : OPTION Menu
(VOLUME)
Description
VOLUME
Adjust Volume: High
WHISPER
Select WHISPER Mode:
NORMAL
WHISPER
When WHISPER is selected the WHISPER mode is activated. In the WHISPER
mode, acoustic noise and screen brightness are reduced.
Low
2
IR REMOTE
Selecting the remote control receiver:
The unit has 3 remote control receivers, as shown in the figure
to the right (1, 2, and 3). You can select which of them to
activate (“v” in the figure), and which to disable.
• The ambient lighting and other factors may prevent the
remote control operation from functioning properly. If this
happens, use this function to disable receivers being
impacted by unneeded light.
LAMP TIME
Refer to LAMP TIME: When set, this function displays the total time the
projector lamp has been used since new.
Reset LAMP TIME [Use this function only when the lamp has been replaced!]:
Depress the RESET button for at least 3 seconds while lamp time is being
displayed. The reset menu will then appear. After you replace the lamp with a
new lamp, select RESET on the menu with the button.
• Do not reset the lamp time unless you have replaced the lamp. And, always
reset the lamp time when replacing the lamp. The message functions will not
operate properly if the lamp time is not reset correctly.
• Before replacing the lamp, carefully read the descriptions headed "THE LAMP".
FILTER TIME
3
1
1
1
1
1
1
1
1
2
2
2
2
2
2
2
3
3
3
3
3
3
3
Refer to FILTER TIME: This function displays the total time the air-filter has
been used since new.
Reset FILTER TIME [Use this function only when the filter is cleaned or replaced!]:
Depress the RESET button for at least 3 seconds while lamp time is being
displayed. The reset menu will then appear. After you replace the filter, select
RESET on the menu with the button.
RESET
CANCEL
• Do not reset the filter time unless you have cleaned or replaced the filter. And,
always reset the filter time when cleaning or replacing the filter. The message
functions will not operate properly if the filter time is not reset correctly.
• Before cleaning or replacing the filter, carefully read the descriptions headed "THE AIR FILTER".
WIRELESS Menu
The WIRELESS menu is only enabled if the wireless function is enabled. Using the
wireless function requires a Wireless & Network Module Terminal (sold separately). See
the Wireless & Network Module Terminal user’s manual for more information about the
WIRELESS menu. Contact your local dealer for more information about the wireless
function and Wireless & Network Module Terminal.
7
WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED
Related Messages
When the unit's power is ON, messages such as those shown below may be displayed. When
any such message is displayed on the screen, please respond as described below.
Message
CHANGE THE LAMP
AFTER REPLACING LAMP,
RESET THE LAMP TIMER.
(Note 1)
Description
Lamp usage time is approaching 2,000 hours. (Note 2)
Preparation of a new lamp, and an early lamp change, is
recommended. After you have changed the lamp, please be
sure to reset the lamp timer.
CHANGE THE LAMP
AFTER REPLACING LAMP,
RESET THE LAMP TIMER.
THE POWER WILL TURN OFF
AFTER
hr.
(Note 1)
Lamp usage time is approaching 2,000 hours. A lamp change
within
hours is recommended. (Note 2)
When lamp usage reaches 2,000 hours, the power will
automatically be turned OFF. Please change the lamp by
referring to “THE LAMP” (Vol.1 27 ). After you have
changed the lamp, please be sure to reset the lamp
timer.
CHANGE THE LAMP
AFTER REPLACING LAMP,
RESET THE LAMP TIMER.
THE POWER WILL TURN OFF
AFTER 0 hr.
As lamp use has reached 2,000 hours, the power will soon be
automatically turned OFF. (Note 2)
Please immediately turn the power OFF, and follow the
instructions in the “THE LAMP” (Vol.1 27 ).
After you have changed the lamp, please be sure to reset the
lamp timer. ( 7 )
CLEAN THE AIR FILTER
AFTER CLEANING AIR FILTER,
RESET THE FILTER TIMER.
NO INPUT IS DETECTED
ON
A note of precaution when cleaning the air filter.
After cleaning the filter, operate FILTER TIME of the OPTION
Menu ( 7 ), and perform reset of the filter timer.
There is no input signal.
Please confirm the signal input connection, and the status of the
signal source.
The horizontal or vertical wavelength of the inputted signal is
SYNC IS OUT OF RANGE
outside of the response parameters of this unit. Please confirm
fH
kHz fV
Hz the specs for this unit or the signal source specs.
ON
The internal portion temperature is rising. Please turn the power
OFF, and allow the unit to cool down for approximately 20
minutes. After having confirmed the following items, then please
CHECK THE AIR FLOW
resent the power to ON.
• Is there blockage of the air passage aperture?
• Is the air filter dirty?
• Does the peripheral temperature exceed 35°C?
NOTES
Note 1: Although this message will be automatically disappeared after around 3 minutes, it will be
reappeared every time the power is turned ON.
Note 2: Lamps have a finite product life. Lamps are characterized by the fact that, after long hours of
usage, a lamp will no longer light up, or the lamp will break or burst, etc. This unit is equipped
with an automatic shut-down function, such that the power will automatically be turned OFF
when lamp usage time has reached 2,000 hours. Please be aware, however, that among lamp
types, there are major differences in product lifetimes; a lamp may thus fail to light even prior
to the functioning of the automatic shut-down function of this unit.
8
Regarding the Indicator Lamps
Lighting and flashing of the POWER indicator, the LAMP indicator, and the
TEMP indicator have the meanings as described in the Table below.
Please respond in accordance with the instructions within the Table.
POWER
indicator
LAMP
indicator
TEMP
indicator
The orange Turned OFF Turned OFF
lamp is lighted (Not lighted) (Not lighted)
Description
The STANDBY mode is set
Flashing of the green lamp
Turned OFF
Turned OFF
The unit is warming up. Please wait.
The green lamp is lighted
Turned OFF
Turned OFF
The unit is in an ON state. Ordinary operations may be performed.
Flashing of the orange lamp
Turned OFF
Turned OFF
Blinking of the
red lamp
-
-
The red lamp
Turned
OFF
The unit is cooling down. Please wait.
The unit is cooling down. Please wait.
A certain error has been detected. Wait until the POWER indicator lamp has finished
flashing, and then perform the proper response measure using the item descriptions
below as reference.
The lamp does not light.
There is a possibility that the interior portion has become heated. Turn the power OFF and wait
approximately 20 minutes. After the main unit has cooled down, please confirm whether or not
there is blockage of the air passage aperture, whether or not the filter is dirty, and/or whether or
not the peripheral temperature exceeds 35°C, etc. After performing any needed maintenance,
turn the power ON again; if the same display is displayed, then please change the lamp.
The red lamp
is lighted, or
blinks
The red lamp
is lighted, or
blinks
The red lamp
is lighted, or
blinks
The red lamp is
lighted, or
blinks
The green lamp
is lighted
The green
lamp is lighted
is lighted
Blinking of the
red lamp
Turned
OFF
Either there is no lamp and/or lamp cover, or either of these has not been properly fixed
(attached). Turn the power OFF and wait approximately 45 minutes. After the main unit has
sufficiently cooled down, please make confirmation of the attachment state of the lamp and
lamp cover. After performing any needed maintenance, turn the power ON again; if the same
display is displayed, then please contact a sales store or a service company.
The cooling fan is not operating. Turn the power OFF and wait approximately 20 minutes. After the
main unit has cooled down, please make confirmation that no foreign matter has become caught in
the fan, etc. After performing any needed maintenance, turn the power ON again; if the same display
red lamp
is displayed, then please contact a sales store or a service company.
There is a possibility that the interior portion has become heated. Turn the power OFF and wait
approximately 20 minutes. After the main unit has cooled down, please confirm whether or not
Turned The red lamp is there is blockage of the air passage aperture, whether or not the filter is dirty, and/or whether or
not the peripheral temperature exceeds 35°C, etc. After performing any needed maintenance,
lighted
OFF
turn the power ON again; if the same display is displayed, then please contact a sales store or a
service company.
There is a possibility that the interior portion has become overcooled. Please use the unit within
Alternative blinking
the usage temperature parameters (0°C to 35°C). After performing any needed maintenance,
turn the power ON again; if the same display is displayed, then please contact a sales store or a
with the red lamp
service company.
Turned
OFF
Blinking of the
Simultaneous blinking
with the red lamp
This is a notification that it is time to clean the filter.
After cleaning the filter, operate the FILTER TIME portion of the OPTION Menu, and perform
reset of the FILTER TIME.
NOTE
When the interior portion has become overheated, for safety purposes, the power source is automatically turned OFF,
and the indicator lamps may also be turned OFF. Press the “ ” (power OFF) side of the main power switch, and wait
for approximately 20 minutes. Please then use the unit only after having first confirmed that the unit has sufficiently
cooled down.
9
WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED (continued)
Phenomena That May Easily Be Mistaken for Machine Defects
Before requesting repair, check in accordance with the following chart.
If the situation cannot be corrected, then contact your dealer.
Phenomenon
Cases not involving a machine defect
Items to be confirmed
Reference
Page(s)
The main power source is not ON.
Turn on the main power.
The electrical power cord is not plugged in.
The input changeover settings
are mismatched.
Correctly connect the power cord.
Be sure to press the “O” (power OFF) side
of the main power switch, and leave this OFF
for approximately 20 minutes. After the unit Vol.1-15
has sufficiently cooled down, turn ON the
power source.
Select the input signal, and
Vol.1-16
correct the settings.
No signal is being inputted.
Correctly connect the connection cord.
Vol.1-8-12
The electrical wiring to this unit
is not correctly connected.
Correctly connect the connection cord.
Vol.1-8-12
The volume setting has been set at (or
adjusted to) an extremely low level.
Adjust the VOLUME setting to a higher level.
Vol.1-18
The MUTE mode is the current setting.
Press the MUTE button to release
Vol.1-18
(change) the MUTE mode setting.
The electrical wiring to this unit
is not correctly connected.
Correctly connect the connection cord.
Vol.1-8-12
The brightness setting has been set at
(or adjusted to) an extremely low level.
Adjust the BRIGHT setting to a
brighter level.
Vol.2-2
The lens cap has not been removed.
Remove the lens cap.
Vol.1-15
Color depth setting or color tone setting
Perform picture adjustments by changing the
COLOR BAL R, the COLOR BAL B, and/or the Vol.2-3
TINT settings, etc.
The brightness setting and/or contrast
setting has not been properly adjusted.
Perform picture adjustments by changing the
Vol.2-2
BRIGHT and/or CONTRAST settings, etc.
The WHISPER mode is the current
setting.
Change (by releasing) from the
Vol.2-7
WHISPER mode.
Lamp is approaching the end of its
product lifetime.
Exchange the old lamp with a new
Vol.1-27, 28
lamp.
Pictures appear
blurry
Either the FOCUS setting or the H
PHASE is not properly adjusted.
Adjust the FOCUS and H PHASE settings.
Input signal changes
with no-operation.
INPUT dial is set between the click
points.
Turn the INPUT dial and set it at the
Vol.1-16
click point.
Power does not
come ON
No sound or
pictures are
outputted
Pictures are
displayed, but no
sounds are heard
Sounds are
heard, but no
pictures are
displayed
Colors have a fadedout appearance
Color tone is poor
Pictures appear
dark
The main power source has been
interrupted during operation, such as by
a power outage (blackout), etc.
Vol.1-3, 15
Vol.1-16
Vol.2-3
NOTE
Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and
such do not constitute or imply a machine defect.
10
SPECIFICATIONS
NOTE • This specifications are subject to change without notice.
Item
Product name
Liquid
crystal
panel
Specification
Liquid crystal projector
Panel size
2.5 cm (0.99 type)
Drive system
TFT active matrix
Pixels
786,432 pixels (1024 horizontal x 768 vertical)
Lens
Zoom lens F=1.7 ~ 2.4 f=30.5 ~ 45.8 mm
Lamp
275 W UHB
Speaker
1.0W+1.0W (Stereo)
Power supply
AC100 ~ 120V, 4.7A / AC220 ~ 240V, 2.0A
Power consumption
430W
Temperature range
0 ~ 35°C (Operating)
Size
380 (W) x 120 (H) x 290 (D) mm (Not including protruding parts)
Weight (mass)
5.7 kg
Ports
RGB Input Ports
RGB ................................1
BNC (when RGB selected)
– (R.G.B.H.V) ..................1
DVI ..................................1
VIDEO Input Ports
VIDEO IN ........................1
S-VIDEO IN ....................1
COMPONENT VIDEO
– (CR/PR, CB/PB, Y) ........1
BNC
(when COMPONENT selected)
– (CR/PR, Y, CB/PB) ........1
Optional Parts
Lamp: DT00531 Air Filter: NJ07081
* For others, consult your dealer.
AUDIO Ports
AUDIO IN 1 ....................1
AUDIO IN 2 ....................1
AUDIO IN (R, L) ..............1
RGB Output Port
RGB OUT........................1
AUDIO Output Port
AUDIO OUT ....................1
CONTROL Ports
CONTROL ......................1
USB ................................1
Other Ports
WIRELESS & NETWORK MODULE....1
REMOTE CONTROL ......1
290
10
303
Dimension Diagram
8
117
72
130
120
2
380
Unit : mm
11
WARRANTY AND AFTER-SERVICE
If a problem occurs with the equipment, first refer to the 8 “WHAT TO DO WHEN YOU
THINK A MACHINE DEFECT HAS OCCURRED” section and run through the suggested
checks. If this does not resolve the problem contact your dealer or service company. They
will tell you what warranty condition is applied.
12
TECHNICAL
SIGNAL CONNECTOR PIN ASSIGNMENT
RGB IN [1]/[2]
RGB OUT
S-VIDEO
D-sub 15-pin Shrink
Pin No
1
2
3
4
5
6
7
8
Signal
Video input Red
Video input Green
Video input Blue
Ground
Ground Red
Ground Green
Ground Blue
Mini Din 4-pin
Pin No
Signal
9
10
Ground
11
RGB IN [1]: SDA (DDC)
12
RGB IN [2]:
RGB OUT :
13
H. sync./ Composite sync.
14
Vertical sync
RGB IN [1]: SCL (DDC)
RGB IN [2]:
15
RGB OUT :
signal
Terminal
RGB
RGB signal
input
BNC (RGB)
(R,G,B,H,V)
DVI
AUDIO IN 1
AUDIO IN 2
VIDEO IN
S-VIDEO IN
Video signal
COMPONENT VIDEO
input
(CR/PR, CB/PB, Y)
BNC (COMPONENT)
(CR/PR, CB/PB, Y)
AUDIO IN R L
RGB OUT
Signal output
AUDIO OUT
Control
functions
CONTROL
USB
Mini Din 4-pin
Pin No Signal
Color:
0.286Vp-p (NTSC, burst signal),
1
75Ω terminator
0.3Vp-p (PAL/SECAM, burst signal),
75Ω terminator
Brightness:
2
1.0Vp-p, 75Ω terminator
3
Ground
4
Ground
-
Specification
Video: RGB separate, Analog, 0.7Vp-p, 75Ω terminator (positive)
H/V. sync.: TTL level (positive/negative)
Composite sync.: TTL level
D-sub 15-pin shrink jack
Video: RGB separate, Analog 0.7Vp-p, 75Ω terminator (positive)
H/V. sync.: TTL level (positive/negative)
Composite sync.: TTL level
BNC connector x 5
TMDS, DC 150-1200 mV/AC 1.56 Vp-p, TTL Level (Positive/Negative)
DVI connector
200mVrms, 57Ω (max. 3.0Vp-p)
Stereo mini jack
1.0Vp-p, 75Ω terminator, RCA jack
Brightness signal: 1.0Vp-p, 75Ω terminator
Color signal: 0.286Vp-p (NTSC, burst signal),75Ω terminator
Color signal: 0.300Vp-p (PAL/SECAM, burst signal),75Ω terminator
Mini DIN 4-pin jack
Y signal: 1.0 Vp-p, 75 Ω terminator
CR/PR signal: 0.7 Vp-p, 75 Ω terminator
CB/PB signal: 0.7 Vp-p, 75 Ω terminator
RCA jack x 3 (BNC connector x 5)
200mVrms, 50 kΩ (max. 3.0Vp-p)
RCA jack
Video: RGB separate, Analog 0.7Vp-p, 75Ω (positive)
Sync.: H,V separate, TTL level (positive/negative)
Composite sync.: TTL level
D-sub 15-pin shrink jack
200mV(rms), output impedance 1kΩ (max. 3.0Vp-p)
Stereo mini jack
D-sub 15pin shrink plug
USB jack (B type)
1
EXAMPLE OF COMPUTER SIGNAL
Resolution
H×V
fH (kHz)
fV (Hz)
Rating
Signal mode
720 × 400
37.9
85.0
VESA
640 × 480
31.5
59.9
VESA
640 × 480
35.0
66.7
640 × 480
37.9
72.8
640 × 480
37.5
75.0
640 × 480
43.3
800 × 600
800 × 600
Display mode
CP-X880
CP-X885
TEXT
Zoom in
Zoom in
VGA (60Hz)
Zoom in
Zoom in
Mac13"mode
Zoom in
Zoom in
VESA
VGA (72Hz)
Zoom in
Zoom in
VESA
VGA (75Hz)
Zoom in
Zoom in
85.0
VESA
VGA (85Hz)
Zoom in
Zoom in
35.2
56.3
VESA
SVGA (56Hz)
Zoom in
37.9
60.3
VESA
SVGA (60Hz)
Zoom in
800 × 600
48.1
72.2
VESA
SVGA (72Hz)
Zoom in
800 × 600
46.9
75.0
VESA
SVGA (75Hz)
Zoom in
800 × 600
53.7
85.1
VESA
SVGA (85Hz)
Zoom in
832 × 624
49.7
74.5
Mac16"mode
Zoom out
1024 × 768
48.4
60.0
VESA
XGA (60Hz)
Zoom out
1024 × 768
56.5
70.1
VESA
XGA (70Hz)
Zoom out
1024 × 768
60.0
75.0
VESA
XGA (75Hz)
Zoom out
1024 × 768
68.7
85.0
VESA
XGA (85Hz)
Zoom out
1152 × 864
67.5
75.0
VESA
SXGA (75Hz)
Zoom out
Zoom out
1280 × 960
60.0
60.0
VESA
SXGA (60Hz)
Zoom out
Zoom out
1280 × 1024
64.0
60.0
VESA
SXGA (60Hz)
Zoom out
Zoom out
1280 × 1024
80.0
75.0
VESA
SXGA (75Hz)
Zoom out
Zoom out
1280 × 1024
91.2
85.0
VESA
SXGA (85Hz)
Zoom out
Zoom out
1600 × 1200
75.0
60.0
VESA
UXGA (60Hz)
Zoom out
Zoom out
Zoom in
NOTE • Some computers may have multiple display screen modes. Use of some
of these modes will not be possible with this projector.
• Be sure to check jack type, signal level, timing and resolution before connecting this
projector to a computer.
• Depending on the input signal, full-size display may not be possible in some cases.
Refer to the number of display pixels above.
• Although the projector can display signals (except DVI input) with resolution up to
UXGA (1,600 x 1,200), the signal will be converted to the projector’s panel resolution
before being displayed. The best display performance will be achieved if the
resolutions of the input signal and projector panel are identical.
• The image may not be displayed correctly when the input sync. signal is “Composite
Sync.” or “Sync. on G”.
• UXGA (1,600 x 1,200) signals cannot be displayed with DVI input.
2
INITIAL SET SIGNALS
The following signals are used for the initial settings.
The signal timing of some computer models may be different. In such case, refer to
adjust the V.POSIT and H.POSIT of the menu.
Back porch b
Front porch d
Display interval c
Back porch b
Front porch d
Display interval c
DATA
DATA
HSYNC
VSYNC
Sync a
Computer /
Signal
Sync a
Horizontal signal timing (µs)
TEXT
a
2.0
b
3.0
c
20.3
d
1.0
Computer /
Signal
Vertical signal timimg (lines)
TEXT
a
3
b
42
c
400
d
1
VGA (60Hz)
3.8
1.9
25.4
0.6
VGA (60Hz)
2
33
480
10
Mac 13"mode
2.1
3.2
21.2
2.1
Mac 13"mode
3
39
480
3
VGA (72Hz)
1.3
3.8
20.3
1.0
VGA (72Hz)
3
28
480
9
VGA (75Hz)
2.0
3.8
20.3
0.5
VGA (75Hz)
3
16
480
1
VGA (85Hz)
1.6
2.2
17.8
1.6
VGA (85Hz)
3
25
480
1
SVGA (56Hz)
2.0
3.6
22.2
0.7
SVGA (56Hz)
2
22
600
1
SVGA (60Hz)
3.2
2.2
20.0
1.0
SVGA (60Hz)
4
23
600
1
SVGA (72Hz)
2.4
1.3
16.0
1.1
SVGA (72Hz)
6
23
600
37
SVGA (75Hz)
1.6
3.2
16.2
0.3
SVGA (75Hz)
3
21
600
1
SVGA (85Hz)
1.1
2.7
14.2
0.6
SVGA (85Hz)
3
27
600
1
Mac 16"mode
1.1
3.9
14.5
0.6
Mac 16"mode
3
39
624
1
XGA (60Hz)
2.1
2.5
15.8
0.4
XGA (60Hz)
6
29
768
3
XGA (70Hz)
1.8
1.9
13.7
0.3
XGA (70Hz)
6
29
768
3
XGA (75Hz)
1.2
2.2
13.0
0.2
XGA (75Hz)
3
28
768
1
XGA (85Hz)
1.0
2.2
10.8
0.5
XGA (85Hz)
3
36
768
1
1152×864 (75Hz)
1.2
2.4
10.7
0.6
1152×864 (75Hz)
3
32
864
1
1280×960 (60Hz)
1.0
2.9
11.9
0.9
1280×960 (60Hz)
3
36
960
1
1280×1024 (60Hz)
1.0
2.3
11.9
0.4
1280×1024 (60Hz)
3
38
1024
1
1280×1024 (75Hz)
1.1
1.8
9.5
0.2
1280×1024 (75Hz)
3
37
1024
2
1280×1024 (85Hz)
1.0
1.4
8.1
0.4
1280×1024 (85Hz)
3
44
1024
1
1600×1200 (60Hz)
1.2
1.9
9.9
0.4
1600×1200 (60Hz)
3
46
1200
1
3
CONNECTION TO THE MOUSE CONTROL
Projector
ADB Mouse
DATA
CONTROL Terminal
D-sub 15-pin shrink jack
RTS
2 3 4 5
6 7 8 9 10
11 12 13 14 15
1
+5V
GND
Serial Mouse
1
2
3
4
SEL0
RTS
D-sub 15-pin shrink jack
1 2 3 4 5
7 8 9 10
11 12 13 14 15
GND
TD
ADB
(POWER ON)
+5V
GND
Mouse jack
Mini DIN 4-pin
3
4
1
2
Projector
CONTROL Terminal
6
Computer
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Computer
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
CD
RD
TD
DTR
GND
DSR
RTS
CTS
RI
1
2
3
4
5
6
7
8
9
Mouse jack
D-sub 9-pin
1
2
6
3
5
4
8
7
9
USB Mouse
USB jack
(B type)
2
3
Computer
Projector
+5V 1
1
1
—DATA 2
2 —DATA
+DATA 3
3
GND 4
4
+5V
USB jack
(A type)
+DATA
1
4 GND
2
3
4
USB cable
PS/2 Mouse
CONTROL Terminal
CLK
DATA
D-sub 15-pin shrink jack
SEL0
RTS
2 3 4 5
7 8 9 10
11 12 13 14 15
+5V
GND
6
4
Projector
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Computer
1
2
3
4
5
6
DATA
GND
+5V
CLK
Mouse jack
Mini DIN 6-pin
6
5
3
4
2
1
RS-232C COMMUNICATION
(1) Turn off the projector and computer power supplies, and connect with the RS-232C
adapter via the RS-232C cable.
(2) Turn on the computer power supply and after the computer has started up, turn on the
projector power supply.
Projector
Control jack
D-sub 15-pin shrink jack
Computer
1
2
3
4
5
SELO 6
RTS 7
8
9
GND 10
11
12
RD 13
TD 14
15
1
2
3
4
5
6
7
8
9
CD
RD
TD
DTR
GND
DSR
RTS
DTS
RI
RS-232C jack
D-sub 9-pin
2
1
6
3
7
4
8
5
9
RS-232C adapter
Communications setting
19200bps, 8N1
1 Protocol
Consist of header (7 bytes) + command data (6 bytes).
2 Header
BE + EF + 03 + 06 + 00 + CRC_low + CRC_high
CRC_low : Lower byte of CRC flag for command data.
CRC_high : Upper byte of CRC flag for command data.
3 Command data
Command data chart
byte_0
byte_1
byte_2
Action
low
byte_3
byte_4
high
low
Type
high
low
byte_5
Setting code
high
Action (byte_0 - 1)
Action
Classification
Content
1
SET
Change setting to desired value.
2
GET
Read projector internal setup value.
4
INCREMENT
Increment setup value by 1.
5
DECREMENT
Decrement setup value by 1.
6
EXECUTE
Run a command.
5
RS-232C COMMUNICATION (continued)
Requesting projector status (Get command)
(1) Send the request code Header + Command data (‘02H’+‘00H’+ type (2 bytes)
+‘00H’+‘00H’) from the computer to the projector.
(2) The projector returns the response code ‘1DH’+ data (2 bytes) to the computer.
Changing the projector settings (Set command)
(1) Send the setting code Header + Command data (‘01H’+‘00H’+ type (2 bytes) +
setting code (2 bytes)) from the computer to the projector.
(2) The projector changes the setting based on the above setting code.
(3) The projector returns the response code ‘06H’ to the computer.
Using the projector default settings (Reset Command)
(1) The computer sends the default setting code Header + Command data (‘06H’+‘00H’+
type (2 bytes) +‘00H’+‘00H’) to the projector.
(2) The projector changes the specified setting to the default value.
(3) The projector returns the response code ‘06H’ to the computer.
Increasing the projector setting value (Increment command)
(1) The computer sends the increment code Header + Command data (‘04H’+‘00H’+
type (2 bytes) +‘00H’+‘00H’) to the projector.
(2) The projector in creases the setting value on the above setting code.
(3) The projector returns the response code ‘06H’ to the computer.
Decreasing the projector setting value (Decrement command)
(1) The computer sends the decrement code Header + Command data (‘05H’+‘00H’+
type (2 bytes) +‘00H’ + ‘00H’) to the projector.
(2) The projector decreases the setting value on the above setting code.
(3) The projector returns the response code ‘06H’ to the computer.
When a command sent by the projector cannot be understood by the computer
When the command sent by the projector cannot be understood, the error command ‘15H’ is
returned by the computer. Some times, the projector ignores RS-232C commands during
other works. If the error command ‘15H’ is returned, please send the same command again.
When data sent by the projector cannot be practice
When the command sent by the projector cannot be practiced, the the error code ‘1cH’
+‘xxxxH’ is returned.
When the data length is greater than indicated by the data length code, the projector will
ignore the excess data code.
Conversely, when the data length is shorter than indicated by the data length code, an
error code will be returned to the projector.
NOTE • Operation cannot be guaranteed when the projector receives an
undefined command or data.
• Provide an interval of at least 40ms between the response code and any other code.
• The projector outputs test data when the power supply is switched ON, and when the
lamp is lit. Ignore this data.
• Commands are not accepted during warm-up.
6
Command data chart
Names
Operation type
Command data
Header
CRC
Action
Type
Setting code
Blue
BE EF
03
06 00
CB D3
01 00
00 30
03 00
White
BE EF
03
06 00
6B D0
01 00
00 30
05 00
Black
BE EF
03
06 00
9B D0
01 00
00 30
06 00
MyScreen
BE EF
03
06 00
FB CA
01 00
00 30
20 00
ORIGNAL
BE EF
03
06 00
FB E2
01 00
00 30
40 00
Get
BE EF
03
06 00
08 D3
02 00
00 30
00 00
Normal
BE EF
03
06 00
C7 D2
01 00
01 30
00 00
H Inverse
BE EF
03
06 00
57 D3
01 00
01 30
01 00
V lnverse
BE EF
03
06 00
A7 D3
01 00
01 30
02 00
H&V Inverse
BE EF
03
06 00
37 D2
01 00
01 30
03 00
BE EF
03
06 00
F4 D2
02 00
01 30
00 00
Normal
BE EF
03
06 00
83 D2
01 00
02 30
00 00
Freeze
BE EF
03
06 00
13 D3
01 00
02 30
01 00
Get
BE EF
03
06 00
B0 D2
02 00
02 30
00 00
ORIGNAL
BE EF
03
06 00
0B D2
01 00
04 30
00 00
OFF
BE EF
03
06 00
9B D3
01 00
04 30
01 00
MyScreen
BE EF
03
06 00
CB CB
01 00
04 30
20 00
Get
BE EF
03
06 00
38 D2
02 00
04 30
00 00
English
BE EF
03
06 00
F7 D3
01 00
05 30
00 00
Français
BE EF
03
06 00
67 D2
01 00
05 30
01 00
Deutsch
BE EF
03
06 00
97 D2
01 00
05 30
02 00
Español
BE EF
03
06 00
07 D3
01 00
05 30
03 00
Italiano
BE EF
03
06 00
37 D1
01 00
05 30
04 00
Norsk
BE EF
03
06 00
A7 D0
01 00
05 30
05 00
Nederlands
BE EF
03
06 00
57 D0
01 00
05 30
06 00
Português
BE EF
03
06 00
C7 D1
01 00
05 30
07 00
BE EF
03
06 00
37 D4
01 00
05 30
08 00
BE EF
03
06 00
A7 D5
01 00
05 30
09 00
BE EF
03
06 00
57 D5
01 00
05 30
0A 00
Get
BE EF
03
06 00
C4 D3
02 00
05 30
00 00
Get
BE EF
03
06 00
7C D2
02 00
07 30
00 00
Increment
BE EF
03
06 00
1A D2
04 00
07 30
00 00
Decrement
BE EF
03
06 00
CB D3
05 00
07 30
00 00
Get
BE EF
03
06 00
08 86
02 00
10 31
00 00
Increment
BE EF
03
06 00
6E 86
04 00
10 31
00 00
Decrement
BE EF
03
06 00
BF 87
05 00
10 31
00 00
Brightness Reset
Execute
BE EF
03
06 00
58 D3
06 00
00 70
00 00
Contrast Reset
Execute
BE EF
03
06 00
A4 D2
06 00
01 70
00 00
V.Position Reset
Execute
BE EF
03
06 00
E0 D2
06 00
02 70
00 00
Blank Color
Mirror
Set
Set
Get
Freeze
Startup
Language
Magnify
Auto off
Set
Set
Set
7
Command data chart (continued)
Names
Operation type
H.Position Reset
Execute
BE EF
03
H.Size Reset
Execute
BE EF
Color Balance
R Reset
Execute
Color Balance
B Reset
Command data
Header
CRC
Action
Type
Setting code
06 00
IC D3
06 00
03 70
00 00
03
06 00
68 D2
06 00
04 70
00 00
BE EF
03
06 00
94 D3
06 00
05 70
00 00
Execute
BE EF
03
06 00
D0 D3
06 00
06 70
00 00
Sharpness Reset
Execute
BE EF
03
06 00
C4 D0
06 00
09 70
00 00
Color Reset
Execute
BE EF
03
06 00
80 D0
06 00
0A 70
00 00
Tint Reset
Execute
BE EF
03
06 00
7C D1
06 00
0B 70
00 00
Keystone_V Reset
Execute
BE EF
03
06 00
08 D0
06 00
0C 70
00 00
Keystone_H Reset
Execute
BE EF
03
06 00
98 D8
06 00
20 70
00 00
Auto Adjust
Execute
BE EF
03
06 00
91 D0
06 00
0A 20
00 00
Auto Keystone_V
Execute
BE EF
03
06 00
E5 D1
06 00
0D 20
00 00
Lamp Time Reset
Execute
BE EF
03
06 00
58 DC
06 00
30 70
00 00
Filter Time Reset
Execute
BE EF
03
06 00
98 C6
06 00
40 70
00 00
off
BE EF
03
06 00
FB D8
01 00
20 30
00 00
on
BE EF
03
06 00
6B D9
01 00
20 30
01 00
BE EF
03
06 00
C8 D8
02 00
20 30
00 00
BE EF
03
06 00
D9 D8
02 00
20 60
00 00
Blank on/off
Set
Get
Error Status
Get
(Example of Return)
00 00
01 00
(Normal) (Cover-error)
04 00
05 00
(Temp-error) (Air flow-error)
Power
Set
OFF
ON
Get
RGB
Input Source
Volume
Mute
Brightness
Contrast
Color Balance R
Set
RGB)
Video
S-Video
Component
DVI
BNC (Component)
Get
Get
Increment
Decrement
Normal
Set
Mute
Get
Get
Increment
Decrement
Get
Increment
Decrement
Get
Increment
Decrement
8
02 00
(Fan-error)
06 00
(Lamp-Time-over)
03 00
(Lamp-error)
07 00
(Cool-error)
08 00
(Filter-Error)
BE EF
BE EF
BE EF
03
03
03
06 00
06 00
06 00
2A D3
BA D2
19 D3
01 00
01 00
02 00
00 60
00 60
00 60
00 00
01 00
00 00
BE
BE
BE
BE
BE
BE
BE
BE
EF
EF
EF
EF
EF
EF
EF
EF
03
03
03
03
03
03
03
03
06
06
06
06
06
06
06
06
00
00
00
00
00
00
00
00
FE
3E
6E
9E
AE
0E
5E
CD
D2
D0
D3
D3
D1
D2
D1
D2
01
01
01
01
01
01
01
02
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
20
20
20
20
20
20
20
20
00
04
01
02
05
03
06
00
00
00
00
00
00
00
00
00
BE
BE
BE
BE
BE
BE
BE
BE
BE
BE
BE
BE
BE
BE
EF
EF
EF
EF
EF
EF
EF
EF
EF
EF
EF
EF
EF
EF
03
03
03
03
03
03
03
03
03
03
03
03
03
03
06
06
06
06
06
06
06
06
06
06
06
06
06
06
00
00
00
00
00
00
00
00
00
00
00
00
00
00
31
57
86
46
D6
75
89
EF
3E
FD
9B
4A
01
67
D3
D3
D2
D3
D2
D3
D2
D2
D3
D3
D3
D2
D2
D2
02
04
05
01
01
02
02
04
05
02
04
05
02
04
00
00
00
00
00
00
00
00
00
00
00
00
00
00
01
01
01
02
02
02
03
03
03
04
04
04
05
05
20
20
20
20
20
20
20
20
20
20
20
20
20
20
00
00
00
00
01
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
BE EF
03
06 00
B6 D3
05 00
05 20
00 00
Names
Operation type
Command data
Header
CRC
Color Balance B
Keystone_V
Keystone_H
Aspect
Picture
Position at
16 : 9 or Small
Get
Increment
Decrement
Get
Increment
Decrement
Get
Increment
Decrement
4:3
Set
16:9
Small
Get
Set
Default
Bottom
Top
Get
Action
Type
Setting code
BE EF
BE EF
BE EF
03
03
03
06 00
06 00
06 00
45 D2
23 D2
F2 D3
02 00
04 00
05 00
06 20
06 20
06 20
00 00
00 00
00 00
BE
BE
BE
BE
BE
BE
BE
BE
BE
BE
EF
EF
EF
EF
EF
EF
EF
EF
EF
EF
03
03
03
03
03
03
03
03
03
03
06
06
06
06
06
06
06
06
06
06
00
00
00
00
00
00
00
00
00
00
B9
DF
0E
E9
8F
5E
9E
0E
FE
AD
D3
D3
D2
D0
D0
D1
D0
D1
D1
D0
02
04
05
02
04
05
01
01
01
02
00
00
00
00
00
00
00
00
00
00
07
07
07
0B
0B
0B
08
08
08
08
20
20
20
20
20
20
20
20
20
20
00
00
00
00
00
00
00
01
02
00
00
00
00
00
00
00
00
00
00
00
BE
BE
BE
BE
EF
EF
EF
EF
03
03
03
03
06
06
06
06
00
00
00
00
62
F2
02
51
D1
D0
D0
D1
01
01
01
02
00
00
00
00
09
09
09
09
20
20
20
20
00
01
02
00
00
00
00
00
V.Position
Get
Increment
Decrement
BE EF
BE EF
BE EF
03
03
03
06 00
06 00
06 00
0D 83
6B 83
BA 82
02 00
04 00
05 00
00 21
00 21
00 21
00 00
00 00
00 00
H.Position
Get
Increment
Decrement
BE EF
BE EF
BE EF
03
03
03
06 00
06 00
06 00
F1 82
97 82
46 83
02 00
04 00
05 00
01 21
01 21
01 21
00 00
00 00
00 00
H.Size
Get
Increment
Decrement
BE EF
BE EF
BE EF
03
03
03
06 00
06 00
06 00
B5 82
D3 82
02 83
02 00
04 00
05 00
02 21
02 21
02 21
00 00
00 00
00 00
Get
Increment
Decrement
Get
Increment
Decrement
BE
BE
BE
BE
BE
BE
EF
EF
EF
EF
EF
EF
03
03
03
03
03
03
06
06
06
06
06
06
00
00
00
00
00
00
49
2F
FE
F1
97
46
83
83
82
72
72
73
02
04
05
02
04
05
00
00
00
00
00
00
03
03
03
01
01
01
21
21
21
22
22
22
00
00
00
00
00
00
00
00
00
00
00
00
Get
Increment
Decrement
Get
Increment
Decrement
RGB
Set
Component
Get
BE
BE
BE
BE
BE
BE
BE
BE
BE
EF
EF
EF
EF
EF
EF
EF
EF
EF
03
03
03
03
03
03
03
03
03
06
06
06
06
06
06
06
06
06
00
00
00
00
00
00
00
00
00
B5
D3
02
49
2F
FE
C2
52
F1
72
72
73
73
73
72
D7
D6
D7
02
04
05
02
04
05
01
01
02
00
00
00
00
00
00
00
00
00
02
02
02
03
03
03
11
11
11
22
22
22
22
22
22
20
20
20
00
00
00
00
00
00
00
01
00
00
00
00
00
00
00
00
00
00
Auto
NTSC
PAL
SECAM
NTSC 4.43
M-PAL
N-PAL
Get
1080i
1035i
Get
BE
BE
BE
BE
BE
BE
BE
BE
BE
BE
BE
EF
EF
EF
EF
EF
EF
EF
EF
EF
EF
EF
03
03
03
03
03
03
03
03
03
03
03
06
06
06
06
06
06
06
06
06
06
06
00
00
00
00
00
00
00
00
00
00
00
9E
FE
6E
6E
5E
FE
0E
0D
F2
62
C1
75
71
70
75
72
74
71
73
73
72
73
01
01
01
01
01
01
01
02
01
01
02
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
00
05
05
05
22
22
22
22
22
22
22
22
22
22
22
0A
04
05
09
02
08
07
00
00
01
00
00
00
00
00
00
00
00
00
00
00
00
H.Phase
Sharpness
Color
Tint
BNC
Video Format
HDTV
Set
Set
9
Command data chart (continued)
Names
Sync on G
Operation type
Set
Type
Setting code
off
BE EF
03
06 00
CB D0
01 00
08 30
01 00
on
BE EF
BE EF
03
03
06 00
06 00
5B D1
68 D1
01 00
02 00
08 30
08 30
00 00
00 00
off
Get
CRC
Action
BE EF
03
06 00
FE 22
01 00
00 23
00 00
Large
Small
Get
BE EF
BE EF
BE EF
03
03
03
06 00
06 00
06 00
6E 23
9E 23
CD 22
01 00
01 00
02 00
00 23
00 23
00 23
01 00
02 00
00 00
Upper left
BE EF
03
06 00
02 23
01 00
01 23
00 00
Upper right
BE EF
03
06 00
92 22
01 00
01 23
01 00
Bottom left
BE EF
03
06 00
62 22
01 00
01 23
02 00
Bottom right
BE EF
03
06 00
F2 23
01 00
01 23
03 00
BE EF
03
06 00
31 23
02 00
01 23
00 00
RGB
BE EF
03
06 00
BA 22
01 00
03 23
00 00
Video
BE EF
03
06 00
2A 23
01 00
03 23
01 00
BE EF
03
06 00
89 22
02 00
03 23
00 00
Video
BE EF
03
06 00
D6 22
01 00
02 23
01 00
S-Video
BE EF
03
06 00
26 22
01 00
02 23
02 00
Get
BE EF
03
06 00
75 23
02 00
02 23
00 00
NORMAL
BE EF
03
06 00
3B 23
01 00
00 33
00 00
WHISPER
BE EF
03
06 00
AB 22
01 00
00 33
01 00
Get
BE EF
03
06 00
08 23
02 00
00 33
00 00
NORMAL
BE EF
03
06 00
C7 F0
01 00
A1 30
00 00
CINEMA
BE EF
03
06 00
57 F1
01 00
A1 30
01 00
DYNAMIC
BE EF
03
06 00
A7 F1
01 00
A1 30
02 00
Get
BE EF
03
06 00
F4 F0
02 00
A1 30
00 00
Large
BE EF
03
06 00
C2 71
01 00
09 22
02 00
Middle
BE EF
03
06 00
32 71
01 00
09 22
01 00
Small
BE EF
03
06 00
A2 70
01 00
09 22
00 00
BE EF
03
06 00
91 70
02 00
09 22
00 00
Full
BE EF
03
06 00
43 D6
01 00
12 30
00 00
X1
BE EF
03
06 00
D3 D7
01 00
12 30
01 00
BE EF
03
06 00
70 D6
02 00
12 30
00 00
off
BE EF
03
06 00
3B EF
01 00
C0 30
00 00
on
BE EF
03
06 00
AB EE
01 00
C0 30
01 00
Get
BE EF
03
06 00
08 EF
02 00
C0 30
00 00
Lamp Time
Get
BE EF
03
06 00
C2 FF
02 00
90 10
00 00
Filter Time
Get
BE EF
03
06 00
C2 F0
02 00
A0 10
00 00
off
BE EF
03
06 00
FF 32
01 00
00 26
00 00
on
BE EF
03
06 00
6F 33
01 00
00 26
01 00
BE EF
03
06 00
CC 32
02 00
00 26
00 00
off
BE EF
03
06 00
03 33
01 00
01 26
00 00
on
BE EF
BE EF
03
03
06 00
06 00
93 32
30 33
01 00
02 00
01 26
01 26
01 00
00 00
off
BE EF
03
06 00
47 33
01 00
02 26
00 00
on
BE EF
03
06 00
D7 32
01 00
02 26
01 00
BE EF
03
06 00
74 33
02 00
02 26
00 00
PinP Size
PinP Position
Set
Set
Get
PinP Audio ch
Set
Get
PinP Input
WHISPER
GAMMA
Over Scan
Set
Set
Set
Set
Get
MyScreen Size
Set
Get
MyScreen Lock
IR Remote Front
Set
Set
Get
IR Remote Rear
Set
Get
IR Remote Top
Set
Get
10
Command data
Header
00CP-X885WBasic-四 02.10.7 6:55 PM ページ1
Hitachi America, Ltd.
Hitachi France
Computer Division 2000 Sierra Point Parkway,
MS760 Brisbane, CA 94005-1835
Tel: +1-800-225-1741 Fax: +1-650-244-7776
www.hitachi.com/lcd.
Immeuble, 'Ariane', 18 Rue Grange Dame Rose,
B.P. 134, 78148 Velizy, Cedex, France
Tel: +33-1-34630542 Fax: +33-1-34650761
Hitachi Canada, Ltd.
Gran Via Carlos 111, 101, 1-1, 08028 Barcelona,
Spain
Tel: +34-3-330-8652 Fax: +34-3-339-7839
6740 Campobello Road, Mississauga, Ontario
L5N2L8, Canada
Tel: +1-905-821-4545 Fax: +1-905-821-1101
Hitachi Home Electronics (Europe), Ltd.
Dukes Meadow, Millboard Road, Bourne End ,
Buckinghamshire SL8 5XF UK
Tel: +44-162-864-3000 Fax: +44-162-864-3400
Hitachi Home Electronics Europe Ltd
426 Bergensesteenweg, 1500 Halle, Belgium
Tel: +32-2-363-9901 Fax: +34-2-363-9900
Hitachi Home Electronics Europe Ltd
Gewerbepark, Hintermattlistr, Postfach, 5506
Magenwil, Switzerland
Tel: +41-62-889-8011 Fax: +41-62-896-4771
Hitachi Europe GmbH
Business Systems Division
Via T. Gulli. 39, 20147 Milano, Italy
Tel: +39-2-487861 Fax: +39-2-48786322
Hitachi Sales Europe GmbH
Business Systems Division
Am Seestern 18, 40547 Dusseldorf, Germany
Tel: +49-211-529-1551 Fax: +49-211-529-1594
Hitachi Business Systems (Nordic)
Brugata 14, N-0184 Oslo, Norway
Tel: +47-2205-9060 Fax: +47-2205-9061
Hitachi Business Systems (Nordic)
Domnarvsgatan 29, Lunda, Box 62, S-163 91
Spanga, Sweden
Tel: +46-8-621-8260 Fax: +46-8-761-6250
Hitachi Business Systems (Nordic)
Kuldyssen 13, DK-2630 Tåstrup, Denmark
Tel: +45-43-99-9200 Fax: +45-43-99-9392
Hitachi Sales Iberica S A
Hitachi Home Electronics Asia, (S) Pte Ltd.
16 Collyer Quay #20-00 Hitachi Tower Singapore
049318, Singapore
Tel: +65-536-2520 Fax: +65-536-2521
Hitachi Sales (Malaysia) Sdn. Bhd.
Wisma Hitachi, No.2, Lorong 13/6A, 46200
Petaling
Jaya, Selangor Darul Ehsan, Malaysia
Tel: +60-3-7573455 Fax: +60-3-7556090
Hitachi Sales (Thailand), Ltd.
994,996 Soi Thonglor, Sukhumvit 55 Road,
Klongton,
Klongtoey, Bangkok 10110, Thailand
Tel: +66-2-381-8381 Fax: +66-2-381-9520
Hitachi (Hong Kong), Ltd.
8th Floor Park-in Commercial Centre, No.56,
Dundas
Street, Kowloon Bay, Kowloon, Hong Kong
Tel: +852-2-7804351 Fax: +852-2-7804915
Hitachi Sales Corp. of Taiwan.
2nd Floor, No.65, Nanking East Road, Section 3,
Taipei, Taiwan
Tel: +886-2-516-0500 Fax: +886-2-516-1501
Hitachi Australia Ltd.
13-15 Lyonpark Road, North Ryde NSW 2113,
Australia
Tel: +61-2-9888-4100 Fax: +61-2-9888-4144
Hitachi, Ltd.
15-12, Nishi Simbashi 2-chome, Minato-ku, Tokyo,
105 Japan
Tel: +81-3-3502-2111 Fax: +81-3-3506-1440
Hitachi Business Systems (Nordic)
Tapiolan Keskustorni 11 Krs. Fin-02100 Espoo,
Finland
Tel: +358-9-3487-1188 Fax: +358-9-455-2152
*QR54481*
Printed in Japan
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ1
LCD Projector CP-X880/CP-X885
USER'S MANUAL
Vol.1 (Basic)
Thank you for purchasing this projector.
WARNING • Please read the accompanying manual “SAFETY
INSTRUCTIONS” and this “USER'S MANUAL” thoroughly to ensure correct
usage through understanding. After reading, store this instruction manual in a
safe place for future reference.
NOTE • The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual
• The reproduction, transmission or use of this document or contents is not permitted without express
written authority.
TRADEMARK ACKNOWLEDGEMENT :
• PS/2, VGA and XGA are registered trademarks of the International Business Machines Corporation.
• Apple, Mac and ADB are registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
• All other trademarks are the property of their respective owners.
CONTENTS
Page
Page
PROJECTOR FEATURES ................2
PREPARATIONS ..............................2
PART NAMES ...................................4
SETTING UP
THE PROJECTOR ............................6
CONNECTING
YOUR DEVICES................................8
USING THE REMOTE
CONTROL .......................................13
TURNING ON THE POWER ...........15
TURNING OFF THE POWER .........17
ADJUSTING THE VOLUME ...........18
TEMPORARILY MUTING
THE SOUND....................................18
ADJUSTING THE POSITION..........19
USING THE AUTOMATIC
ADJUSTMENT FEATURE ..............20
CORRECTING KEYSTONE
DISTORTIONS ................................21
USING THE MAGNIFY
FEATURE........................................22
FREEZING THE SCREEN ..............22
ADJUSTING SCREEN WITH
ONE-TOUCH ...................................23
SELECTING THE ASPECT
RATIO..............................................24
TEMPORARILY BLANKING
THE SCREEN..................................24
DISPLAYING CHILD WINDOW
(P. IN. P: Picture in Picture) ..........24
USING THE MENU
FUNCTIONS....................................25
OPERATING THE PC SCREEN .....26
THE LAMP ......................................27
THE AIR FILTER.............................29
OTHER CARE .................................31
1
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ2
PROJECTOR
FEATURES
This liquid crystal projector is used to project
various computer signals as well as NTSC / PAL /
SECAM video signals onto a screen. Little space
is required for installation and large images can
easily be realized.
●Ultra High Brightness
●One Touch Function
●Partial Magnification Function
●Whisper Mode Equipped
Crisp, ultra-bright presentations is achieved
by using a UHB (ultra high brightness) lamp
and a highly efficient optical system
Interesting parts of images can be magnified
for closer viewing
PREPARATIONS
Just press the ONE TOUCH button to
automatically retrieve input signals, calibrate
images, and correct keystone distortion
Special mode is available for reducing
projector noise to achieve quieter operation
Your projector should come with the items
shown below. Check to make sure that all the
items are included. Contact your dealer if
anything is missing.
NOTE • Keep the original packing material for future reshipment.
Power cord
(US Type)
Power cord
(UK Type)
Power cord
(Europe Type)
RGB cable
Video/Audio cable
USB mouse
cable
Projector
(with Lens Cap)
Liquid Crystal Projector
CP-X880/CP-X885
(CP-X880W/CP-X885W)
USER'S MANUAL Vol.1 Basic
Please read this user's manual thoroughly to ensure correct usage through understanding.
ENGLISH
DEUTSCH
BEDIENUNGSANLEITUNG Teil 1 Grundlagen
Bitte lessen Sie diese Benutzerhandbuch zugunsten der korrekten Bedienung aufmerksam.
MANUEL D'UTILISATION Vol.1 Fondements
Nous vous recommandons de lire attentivement ce manuel pour bien assimiler le fonctionnement de
l'appareil.
FRANÇAIS
MANUALE D'ISTRUZIONI Vol.1 Informazioni di base
Vi preghiamo voler leggere attentamente il manuale d'istruzioni in modo tale da poter comprendere
quanto riportato ai fini di un corretto utilizzo del proiettore.
ITALIANO
MANUAL DE USUARIO Vol.1 Básico
Lea cuidadosamente este manual del usuario para poder utilizar corretamente el producto.
GEBRUIKSAANWIJZING Vol.1 Basis
ESPAÑOL
Lees voor het qebruik alstublieft deze handleiding aandachtig door, om volledig profijt te hebben van
de uitgebreide mogelijkheden.
BRUKERHÅNDBOK Vol.1 Grunnleggende
Vennligst les denne bruksanvisningen grundig for å være garantert driftssikker bruk.
NEDERLANDS
NSTRUÇÕES DO PROPRIETÁRIO Vol.1 Básico
Para assegurar o uso correto do equipamento, por favor leia atentamente este manual do utilizador.
NORSK
PORTGÊS
中文
REGULATORY
NOTICES
User's Manuals
(Vol.1/Vol.2)
Safety Instructions
LASER
INDICATOR
STANDBY/ON
VIDEO
RGB
FOCUS
ZOOM
PAGE
UP
DOWN
BLANK
LASER
ASPECT
PUSH
RS-232C
adapter
Soft carrying case
2
Two AA batteries
(for the remote
control)
ENTER
ESC
MENU
POSITION
AUTO
MAGNIFY
RESET
PinP
VOLUME
ON
FREEZE
MUTE
OFF
WIRELESS
KEYSTONE ONE TOUCH
Remote control
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ3
WARNING Precautions to observe in regards to the power cord: Please use extra
caution when connecting the projector's power cord as incorrect or faulty
connections may result in FIRE AND/OR ELECTRICAL SHOCK. Please adhere to the
following safety guidelines to insure safe operation of the projector:
• Only plug the power cord into outlets rated for use with the power cord's specified voltage range.
• Only use the power cord that came with the projector.
• NEVER ATTEMPT TO DEFEAT THE GROUND CONNECTION OF THE THREEPRONGED PLUG!
• Make sure that you firmly connect the power cord to the projector and wall outlet.
1
Connect your devices to the projector
2
Insert the batteries into the remote
control
3
Connect the power cord
Connect your computer, VCR and/or other
devices you will be using to the projector.
8
∼ 12
13
(1) Connect the connector of the electrical power cord to the AC inlet of the main unit.
(2) Firmly plug the power cord's plug into the outlet
Power outlet
(1)
AC inlet
(2)
Power cord
3
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ4
THE PROJECTOR
PART NAMES
Indicates the
corresponding
reference page
21 KEYSTONE button
INPUT dial 16
22 ONE TOUCH button
RGB indicator 16
19 RESET button
BNC indicator 16
DVI indicator 16
RGB
INPUT
16 FOCUS button
KEYSTONE
BNC
VIDEO indicator 16
FOCUS
VIDEO
S-VIDEO indicator 16
16 ZOOM button
ONE TOUCH
DVI
ZOOM
RESET
25 MENU button
S-VIDEO
COMPONENT
COMPONENT indicator 16
STANDBY/ON
STANDBY/ON button 15
MENU
9 LAMP indicator
Vol.2
TENP
LANP
9 TEMP indicator
Vol.2
Control Panel
Elevator screw
6
Elevator feet
6
Lens cap 15
29 Air filter
14 Remote sensor
15 Lens
COMPONENT VIDEO port 12
CONTROL port 10
WIRELESS & NETWORK
MODULE port Vol.2
7
6
Elevator button
14 REMOTE CONTROL port
12 VIDEO IN port
12 S-VIDEO IN port
RGB OUT port 12
14 Remote sensor
DVI port 11
3 AC power inlet
RGB port 10
15 Power switch
BNC port 11
AUDIO IN R/L port 12
10 USB port
9 AUDIO OUT port
10 AUDIO IN 1/2 port
4
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ5
THE REMOTE CONTROL
LASER INDICATOR 14
16 RGB button
VIDEO button 16
STANDBY/ON button 15
LASER
INDICATOR
STANDBY/ON
VIDEO
16 ZOOM buttons
RGB
26 PAGE buttons
UP
FOCUS buttons 16
FOCUS
ZOOM
PAGE
DOWN
BLANK button 24
LASER
BLANK
14 LASER button
26 Right mouse button
Disk pad
26
<For mouse control>
<For mouse control>
Right mouse click
Mouse cursor movement
Left mouse click
ASPECT
25 Lever switch (*)
ASPECT button 24
19 RESET button
PUSH
Left
/Right
25
Key buttons
ESC button 25
ENTER
ESC
MENU
RESET
POSITION
AUTO
PinP
MAGNIFY
MENU button 25
POSITION button 19
MAGNIFY buttons 22
WIRELESS button Vol.2
7
VOLUME
ON
FREEZE
MUTE
20 AUTO button
24 PinP button
18 VOLUME button
OFF
WIRELESS
KEYSTONE ONE TOUCH
18 MUTE button
22 FREEZE button
23 ONE TOUCH button
KEYSTONE button 21
REMOTE CONTROL port 14
* Using the lever switch
Flip toward disk pad : Up ( ) key
Flip toward MENU button: Down ( ) key
Press in center
: ENTER button
5
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ6
SETTING UP THE PROJECTOR
CAUTION • Install the projector in a suitable environment according to instructions
of the accompanying manual “SAFETY INSTRUCTIONS” and this manual.
• If you press the elevator buttons without holding the projector, the projector might
crash down, overturn, smash your fingers and possibly result in malfunction. To
prevent damaging the projector and injuring yourself, ALWAYS HOLD THE
PROJECTOR whenever using the elevator buttons to adjust the elevator feet.
Adjusting the Projector's Elevator Feet
If the surface on which the projector is placed, or the screen is tilted, use the
elevator feet and elevator screw to adjust the projection angle of the main unit.
The adjustment range of the elevator feet is 0 to 9 degrees.
1
Press and hold in the elevator
buttons
Elevator button
2
Raise or lower the projector to the
desired height and then release the
elevator buttons
When you release the elevator buttons, the elevator
feet will lock into position.
Elevator feet
3
Turn the elevator screw to fine tune.
Elevator screw
6
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ7
Adjusting the Screen Size and Projection Distance
Refer to the illustrations and tables below to determine the screen size and
projection distance.
The values shown in the table are calculated for a full size screen
a:Distance from the projector to the screen (±10%)
b:Distance from the lens center to the bottom of the screen (±10%)
c:Distance from the lens center to the top of the screen (±10%)
The screen
Top view
If 4:3 aspect ratio
4
3
Screen Size [inch (m)]
30 (0.8)
40 (1.0)
50 (1.3)
60 (1.5)
70 (1.8)
80 (2.0)
90 (2.3)
100 (2.5)
120 (3.0)
150 (3.8)
200 (5.0)
250 (6.3)
300 (7.5)
Lens center
c
Side view
a
The screen
Top view
a [inch (m)]
b
Min.
Max. [inch (cm)]
34 (0.9) 52 (1.3) 0 (0)
46 (1.2) 71 (1.8) 0 (0)
58 (1.5) 89 (2.3) 0 (0)
71 (1.8) 107 (2.7) 0 (0)
83 (2.1) 126 (3.2) 0 (0)
95 (2.4) 144 (3.7) 0 (0)
108 (2.7) 162 (4.1) 0 (0)
120 (3.0) 181 (4.6) 0 (0)
144 (3.7) 217 (5.5) 0 (0)
181 (4.6) 272 (6.9) 0 (0)
243 (6.2) 364 (9.2) 0 (0)
304 (7.7) 455 (11.6) 0 (0)
366 (9.3) 547 (13.9) 0 (0)
c
[inch (cm)]
18 (46)
24 (61)
30 (76)
36 (91)
42 (107)
48 (122)
54 (137)
60 (152)
72 (183)
90 (229)
120 (305)
150 (381)
180 (457)
If 16:9 aspect ratio
16
9
Screen Size [inch (m)]
c
Lens center
Side view
b
a
30 (0.8)
40 (1.0)
50 (1.3)
60 (1.5)
70 (1.8)
80 (2.0)
90 (2.3)
100 (2.5)
120 (3.0)
150 (3.8)
200 (5.0)
250 (6.3)
300 (7.5)
a [inch (m)]
Min.
Max.
37 (0.9) 57 (1.4)
50 (1.3) 77 (2.0)
64 (1.6) 97 (2.5)
77 (2.0) 117 (3.0)
90 (2.3) 137 (3.5)
104 (2.6) 157 (4.0)
117 (3.0) 177 (4.5)
131 (3.3) 197 (5.0)
157 (4.0) 237 (6.0)
198 (5.0) 296 (7.5)
265 (6.7) 396 (10.1)
332 (8.4) 496 (12.6)
399 (10.1) 596 (15.1)
b
[inch (cm)]
2 (6.2)
13 (32)
16 (41)
19 (49)
22 (57)
26 (65)
29 (73)
32 (81)
38 (97)
48 (121)
64 (162)
80 (202)
96 (243)
c
[inch (cm)]
17 (44)
27 (70)
31 (78)
34 (86)
37 (94)
40 (102)
43 (110)
47 (118)
53 (134)
63 (159)
78 (199)
94 (240)
110 (280)
7
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ8
CONNECTING YOUR DEVICES
Devices You Can Connect to the Projector
(Refer to this section for planning your device
configuration to use for your presentation.)
CAUTION • Incorrect connecting could result in fire or electrical shock. Please
read this manual and the separate “SAFETY INSTRUCTIONS”.
ATTENTION Precautions to observe when connecting other devices to the projector
• Whenever attempting to connect other devices to the projector, please thoroughly
read the manual of each device to be connected.
• TURN OFF ALL DEVICES prior to connecting them to the projector. Attempting to
connect a live device to the projector may generate extremely loud noises or other
abnormalities that may result in malfunction and/or damage to the device and/or
projector. Refer to the “TECHNICAL” of the USER’S MANUAL (Vol.2) for the pin
assignment of connectors and RS-232C communication data.
• Make sure that you connect devices to the correct port. Incorrect connection may
result in malfunction and/or damage to the device and/or projector.
• Some other cables have to be used with core set. Use the accessory cable or a
designated-type cable for the connection. For cables that have a core only at one
end, connect the core to the projector.
• Secure the screws on the connectors and tighten.
Indicates the
corresponding
reference page
12 Display monitors
11 DVD players
10 Laptop computers
11 VCRs
10 Desktop computers
8
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ9
Ports and Cables
Refer to the table below to find out which projector port and cable to use for connecting a
given device. Use this table for determining which cables to prepare.
Function
Projector Port
Connection Cables
RGB
RGB cable
(With D-sub 15-pin shrink jack and inch
thread screws)
BNC(R/CR/PR)(G/Y)(B/CB/PB)(H)(V)
• When BNC (RGB) is selected (*)
BNC cable
Analog output
RGB OUT
RGB cable
(With D-sub 15-pin shrink jack and inch
thread screws)
DVI input
DVI
DVI cable
Analog RGB input
Audio input from computer
USB mouse control
AUDIO IN 1
• Linked to RGB or DVI port input
AUDIO IN 2
• Linked to BNC (RGB) port input (*)
USB
PS/2 mouse control
Audio/video cable (Stereo mini)
USB cable
PS/2 mouse cable
ADB mouse control
ADB mouse cable
CONTROL
Serial mouse control
Serial mouse cable
RS-232C communications
RS-232C adapter + RS-232C cable
S video input
S-VIDEO IN
S-video cable (mini DIN 4-pin jack)
Video input
VIDEO IN
Audio/video cable
COMPONENT(CR/PR)(CB/PB)(Y)
Component video input
BNC(R/CR/PR)(G/Y)(B/CB/PB)
Component video cable
• When BNC (COMPONENT) is
selected (*)
Audio input from video equipment
AUDIO IN R,L
Audio/video cable or audio cable (RCA jack)
Audio output
AUDIO OUT
Audio cable (Stereo mini)
Wired remote control signal input
REMOTE CONTROL
Audio cable (Stereo mini)
* Before using the BNC port, change RGB input to component video input on the BNC menu item of
the INPUT menu.
NOTE About Plug-and-Play Capability
• This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by connecting
this projector to computers that are VESA DDC (display data channel) compatible. Please take
advantage of this function by connecting the accessory RGB cable to the RGB port (DDC 1/2B
compatible). Plug-and-Play may not work properly if any other type of connection is attempted.
• Plug-and-Play is a system composed of the computer, its operating system and
peripheral equipment (i.e. display devices).
• Please use the standard drivers as this projector is a Plug-and-Play monitor.
9
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ10
CONNECTING YOUR DEVICES (continued)
Connecting to a Computer
ATTENTION Whenever attempting to connect a laptop computer to the projector,
be sure to activate the laptop's RGB external image output (set the laptop to CRT
display or to simultaneous LCD and CRT display). For details on how this is done,
please refer to the instruction manual of the corresponding laptop computer.
REMOTE
CONTROL
REMOTE
CONTROL
DVI
CR/PR
Ca/Pa
Y
CR/PR
A
A
RGB
R/CR/PR
DVI
COMPONENT VIIDEO
RGB OUT
G/Y
B/Ca/Pa
V
R-AUDIO IN-L VIDEO IN
1
2
RGB OUT
G/Y
B/Ca/Pa
H
R-AUDIO IN-L VIDEO IN
1
2
V
C
B
BNC
AUDIO IN
AUDIO OUT
BNC
USB
A
B
A
COMPONENT VIIDEO
CONTROL
S-VIDEO IN
R/CR/PR
Y
B
RGB
CONTROL
H
Ca/Pa
D
AUDIO IN
AUDIO OUT
C
B
S-VIDEO IN
USB
D
USB cable
USB OUT
AUDIO cable
(Stereo mini) AUDIO OUT
Analogue
RGB OUT
CONTROL OUT
MOUSE cable
RGB cable
Analogue
RGB OUT
AUDIO cable
(Stereo mini) AUDIO OUT
RGB cable
If connecting to a
USB port equipped
computer
Desktop computer
Laptop computer
NOTE
• Some computers may have multiple display screen modes. Use of some of these
modes will not be possible with this projector.
• For some RGB input modes, the optional Mac adapter is necessary.
10
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ11
Connecting to a Computer (continued)
BNC Input
DVI Input
A
REMOTE
CONTROL
DVI
CR/PR
RGB
R/CR/PR
RGB OUT
G/Y
B/Ca/Pa
Ca/Pa
Y
CONTROL
H
V
A A A A A
BNC
CR/PR
RGB
R-AUDIO IN-L VIDEO IN
1
2
RGB OUT
R/CR/PR
G/Y
B/Ca/Pa
Ca/Pa
Y
COMPONENT VIIDEO
CONTROL
S-VIDEO IN
H
V
B
AUDIO IN
A
REMOTE
CONTROL
DVI
COMPONENT VIIDEO
R-AUDIO IN-L VIDEO IN
1
2
S-VIDEO IN
B
AUDIO OUT
USB
BNC
AUDIO IN
A
B
USB
B
AUDIO cable
(Stereo mini) AUDIO OUT
DVI cable
DVI OUT
AUDIO cable
(Stereo mini) AUDIO OUT
BNC cable
BNC OUT
Desktop computer
AUDIO OUT
Desktop computer
11
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ12
CONNECTING YOUR DEVICES (continued)
Connecting to a DVD Player
Connecting to a VCR
REMOTE
CONTROL
DVI
RGB OUT
RGB
R/CR/PR
CR/PR
G/Y
B/Ca/Pa
CONTROL
H
Y
Ca/Pa
C
R-AUDIO IN-L VIDEO IN
1
2
V
BNC
AUDIO IN
A
B
REMOTE
CONTROL
COMPONENT VIIDEO
A A A
B B B
DVI
CR/PR
RGB OUT
RGB
AUDIO OUT
USB
G/Y
B/Ca/Pa
H
AUDIO IN
A
REMOTE
CONTROL
DVI
CR/PR
Y
Ca/Pa
COMPONENT VIIDEO
A
RGB OUT
RGB
R/CR/PR
G/Y
B/Ca/Pa
CONTROL
H
R-AUDIO IN-L VIDEO IN
1
2
V
BNC
AUDIO IN
AUDIO OUT
S-VIDEO IN
USB
A
RGB IN
RGB cable
Display monitor
12
S-VIDEO OUT
Connecting to a Display Monitor
USB
S-VIDEO cable
VCR
DVD player
AUDIO OUT
If using a S-video
connection
If using an audio/video
connection
If using a component
video connection
B
S-VIDEO IN
B
AUDIO/VIDEO
OUT
S-VIDEO OUT
AUDIO/VIDEO OUT
AUDIO/VIDEO cable
AUDIO/VIDEO cable
COMPONENT OUT
COMPONENT VIDEO cable
S-VIDEO cable
If using a S-video
connection
COMPONENT VIIDEO
R-AUDIO IN-L VIDEO IN
1
2
V
BNC
C
Y
A A A
CONTROL
S-VIDEO IN
R/CR/PR
Ca/Pa
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ13
USING THE REMOTE CONTROL
Putting batteries into the remote control unit
CAUTION Precautions to observe in regards to the batteries
Always handle the batteries with care and use them only as directed. Improper use may result in
battery cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environment.
• Keep the battery away from children and pets.
• Be sure to use only the batteries specified for use with the remote control. Do not mix new batteries with used ones.
• When inserting batteries, verify that the plus and minus terminals are aligned correctly (as indicated in the remote control).
• When you dispose the battery, you should obey the law in the relative area or country.
1
2
3
Remove the battery cover
Slide back and remove the battery cover in the direction of the
arrow.
Insert the batteries
Align and insert the two AA batteries (that came with the
projector) according to their plus and minus terminals (as
indicated in the remote control).
Close the battery cover
Replace the battery cover in the direction of the arrow and
snap it back into place.
13
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ14
USING THE REMOTE CONTROL (continued)
Operating the remote control
WARNING • The laser pointer of the remote control transmitter is used in
place of a finger or rod. Never look directly into the laser beam outlet or point
the laser beam at other people. The laser beam can cause vision problems.
CAUTION • Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous radiation exposure.
es
gre
20 degrees
de
20
es
gre
de
30
30 degrees
• The remote control works with both the
projector's front and rear remote sensors.
• The range of the remote sensor on the front is 3
meters with a 60-degree range (30 degrees to the
left and right of the remote sensor), and back is 3
meters with a 40-degree range.
• Since the remote control uses infrared light to send
approximately
signals to the projector (Class 1 LED), be sure to use
3 meters
approximately
3 meters
the remote control in an area free from obstacles
that could block the remote control's output signal to
the projector.
• The wired remote control:
You can use the remote control as a wired remote control, by connecting the REMOTE CONTROL ports of the
main unit and remote control via an audio cable (3.5 dia. stereo mini cable with plugs).
ATTENTION Precautions to observe when using the remote control
• Do not disassemble the remote control.
• Do not drop or otherwise expose the remote control to physical impact.
• Do not get the remote control wet or place it on wet objects. Doing so may result in malfunction.
• Do not place the remote control near the projector’s lens, fan, or vents.
• Remove the batteries from the remote control and store them in a safe place if you
won't be using the remote control for an extended period.
• Replace the batteries whenever the remote control starts to malfunction.
• When strong light, such as direct sunlight or light from an extremely close range (such as from an
inverter fluorescent lamp), hits the projector's remote sensor, the remote control may cease to function.
Adjust the direction of the projector to keep light from directly hitting the projector's remote sensor.
14
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ15
TURNING ON THE POWER
Precautions
Connect all devices to be used to the projector prior to turning on the power.
∼ 12
8
WARNING When the power is ON, a strong light is emitted. Do not look into the
lens.
1
LASER
INDICATOR
STANDBY/ON
VIDEO
RGB
FOCUS
ZOOM
PAGE
Make sure that the power cord is firmly and
correctly connected to the projector and outlet
3
UP
DOWN
2
LASER
BLANK
Turn on the projector's power
Set the power switch to [ | ] (ON). The STANDBY/ON
indicator will light to solid orange.
power switch
Control panel
RGB
INPUT
KEYSTONE
BNC
ONE TOUCH
DVI
FOCUS
VIDEO
STANDBY/ON indicator
ZOOM
RESET
S-VIDEO
COMPONENT
STANDBY/ON
MENU
TENP
LANP
3
• The projector begins warming up and the
STANDBY/ON indicator blinks green.
• The STANDBY/ON indicator stops blinking
and lights to solid green once the
projector's power is completely on.
NOTE Turn the
power on/off in
right order.
• Power on the
projector before the
computer or video
tape recorder.
• Power off the
projector after the
computer or video
tape recorder.
Press the STANDBY/ON button (control
panel or remote control)
4
STANDBY/ON
Remove the lens cap
The picture is projected.
15
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ16
TURNING ON THE POWER (continued)
Selecting an Input Signal
5
Using the remote control
If selecting RGB input
Press the RGB button
Turn the INPUT dial
Press this button to toggle between the devices
connected to RGB IN 1 and 2. As illustrated
below, each time you press the RGB button, the
projector switches between RGB IN 1 and 2.
Select the signal you wish to project.
• When BNC (RGB) is selected:
RGB
BNC(RGB)
Using the projector's control panel
RGB
Turning the dial cycles
through the inputs as
shown below. Select the
terminal to which the signal
you want to project is input.
GB
INPUT
• When BNC (RGB) is selected:
RGB
BNC(RGB)
DVI
DVI
COMPONENT VIDEO
S-VIDEO
VIDEO
• When BNC (COMPONENT) is selected:
• When BNC (COMPONENT) is selected:
RGB
RGB
DVI
If selecting video input
Press the VIDEO button
BNC(COMPONENT)
S-VIDEO
COMPONENT VIDEO
Press this button to toggle between the
VIDEO
devices connected to VIDEO IN, S-VIDEO
IN and COMPONENT VIDEO. As
illustrated below, each time you press the
VIDEO button, the projector switches between
VIDEO IN, S-VIDEO IN and COMPONENT VIDEO.
Select the signal you wish to project.
DVI
VIDEO
NOTE
Turn the INPUT dial and set it at the
click point, otherwise input signal
selection may be incorrect.
• When BNC (RGB) is selected:
VIDEO IN
S-VIDEO IN
COMPONENT VIDEO
• When BNC (COMPONENT) is selected:
VIDEO IN
S-VIDEO IN
COMPONENT VIDEO
BNC(COMPONENT)
6
Use the ZOOM
the screen size
/
buttons to adjust
ZOOM
ZOOM
(Control panel)
7
Use the FOCUS
the focus
/
buttons to adjust
FOCUS
FOCUS
(Control panel)
16
(Remote control)
(Remote control)
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ17
TURNING OFF THE POWER
1
LASER
INDICATOR
STANDBY/ON
VIDEO
RGB
The message "Power off?" will appear on the screen for
approximately 5 seconds.
UP
FOCUS
Press the STANDBY/ON button (control
panel or remote control)
STANDBY/ON
PAGE
ZOOM
DOWN
BLANK
LASER
2
Press the STANDBY/ON button again while the "Power off?"
message is visible. The projector lamp goes off and starts cooling
down. While cooling, the STANDBY/ON indicator flashes orange.
When in this state, pressing the STANDBY/ON button has no
effect.
When lamp cooling is complete, the STANDBY/ON indicator stops
flashing, and turning solid orange.
ASPECT
PUSH
ENTER
ESC
MENU
RESET
POSITION
AUTO
PinP
MAGNIFY
Press the STANDBY/ON button again
(control panel or remote control)
VOLUME
ON
FREEZE
MUTE
STANDBY/ON
OFF
WIRELESS
KEYSTONE ONE TOUCH
Control panel
RGB
INPUT
KEYSTONE
3
BNC
ONE TOUCH
DVI
FOCUS
VIDEO
ZOOM
RESET
S-VIDEO
COMPONENT
STANDBY/ON
MENU
TENP
LANP
Check that the STANDBY/ON indicator
stops blinking and lights to
power switch
solid orange.
Switch the power switch to
[O] (OFF).
STANDBY/ON indicator
NOTE
• Except in cases of
emergency, do not turn off
the power switch while the
STANDBY/ON indicator is
solid or flashing green.
Doing so could shorten
the lamp lifetime.
4
Confirm that the STANDBY/ON indicator has
gone off and then attach the lens cap.
When the projector has completed powering down, the
STANDBY/ON indicator will go off.
17
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ18
ADJUSTING THE VOLUME
LASER
INDICATOR
STANDBY/ON
VIDEO
RGB
FOCUS
ZOOM
PAGE
1
UP
Press the VOLUME button
VOLUME
As illustrated on the right, a dialog will
appear on the screen to aid you in adjusting
the volume.
VOLUME
DOWN
BLANK
LASER
16
2
ASPECT
Use the lever switch
volume
/
to adjust the
Press the VOLUME button again to close the dialog and
complete this operation. (Even if you don't do anything, the
dialog will automatically disappear after a few seconds.)
PUSH
ENTER
ESC
MENU
POSITION
AUTO
MAGNIFY
RESET
VOLUME
PinP
VOLUME
ON
FREEZE
Press this to increase the volume
MUTE
OFF
WIRELESS
Press this to decrease the volume
KEYSTONE ONE TOUCH
16
TEMPORARILY MUTING THE SOUND
DOWN
LASER
BLANK
ASPECT
1
Press the MUTE button
As illustrated on the right, a dialog will appear on the
screen indicating that you have muted the sound. Press
the VOLUME button to close the dialog. (Even if you don't
do anything, the dialog will automatically disappear after
a few seconds.)
Press the MUTE button again to restore the sound.
VOLUME
PUSH
ENTER
ESC
MENU
RESET
POSITION
AUTO
PinP
MUTE
MAGNIFY
VOLUME
ON
FREEZE
MUTE
OFF
WIRELESS
18
KEYSTONE ONE TOUCH
16
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ19
ADJUSTING THE POSITION
LASER
INDICATOR
STANDBY/ON
VIDEO
RGB
FOCUS
ZOOM
PAGE
1
Press the POSITION button
As illustrated on the right, a dialog will appear on the screen to
aid you in adjusting the position.
UP
DOWN
BLANK
LASER
POSITION
POSITION
ASPECT
2
PUSH
ENTER
ESC
MENU
RESET
POSITION
AUTO
PinP
MAGNIFY
VOLUME
ON
FREEZE
MUTE
OFF
WIRELESS
KEYSTONE ONE TOUCH
Use the
position
,
,
,
buttons to adjust the
When you want to initialize the position, press the RESET
button during adjustment.
Press the POSITION button again to close the dialog and
complete this operation. (Even if you don't do anything, the
dialog will automatically disappear after a few seconds.)
This function is only available for RGB/BNC (RGB) input.
19
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ20
USING THE AUTOMATIC ADJUSTMENT FEATURE
BLANK
LASER
Press the AUTO button
AUTO
Automatic Adjustment for RGB Input
ASPECT
PUSH
ENTER
ESC
MENU
POSITION
AUTO
MAGNIFY
RESET
PinP
VOLUME
ON
FREEZE
MUTE
OFF
WIRELESS
1
Horizontal position (H. POSIT), vertical position (V.
POSIT), clock phase (H. PHASE) and horizontal size (H.
SIZE) are automatically adjusted.
Make sure that the application window is set to its
maximum size prior to attempting to use this feature.
Dark pictures may still be incorrectly adjusted. Use a
bright screen when adjusting.
KEYSTONE ONE TOUCH
Automatic Adjustment for Video Input
The signal type best suited for the respective input
signal is selected automatically.
This feature is available only if VIDEO is set to AUTO in
the INPUT menu.
NOTE
The automatic adjustment operation requires approximately 10 seconds. Also, please
note that it may not function correctly with some input signals.
20
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ21
CORRECTING KEYSTONE DISTORTIONS
1
ASPECT
Press the KEYSTONE button
As illustrated on the right, a dialog will appear
on the screen to aid you in correcting the
distortion.
KEYSTONE
KEYSTONE
PUSH
ENTER
ESC
MENU
POSITION
AUTO
MAGNIFY
PinP
VOLUME
ON
FREEZE
MUTE
OFF
WIRELESS
16
RESET
2
Use the
,
buttons to select the
direction of distortion to correct ( /
3
Use the lever switch
distortion
KEYSTONE ONE TOUCH
/
)
to correct
Press the KEYSTONE button again to close the dialog and
complete this operation. (Even if you don't do anything, the
dialog will automatically disappear after a few seconds.)
NOTE
• This function may not be work well with some types of input signals.
• The adjustable range for correcting keystone distortions will vary with the type of
input signal.
21
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ22
USING THE MAGNIFY FEATURE
DOWN
BLANK
1
Press the MAGNIFY (ON) button
2
Press the POSITION button, then use the lever switch
/
, / to select the area to zoom. Press the
POSITION button again to finalize the zoom area.
The projector enters MAGNIFY mode.
MAGNIFY
ON
LASER
ASPECT
PUSH
ENTER
ESC
MENU
RESET
POSITION
AUTO
PinP
MAGNIFY
POSITION
POSITION
VOLUME
ON
FREEZE
MUTE
OFF
WIRELESS
KEYSTONE ONE TOUCH
3
Use the lever switch
zoom level
/
to adjust the
Press the MAGNIFY (OFF) button to exit MAGNIFY mode
and restore the screen to normal. (The projector will also
automatically exit MAGNIFY mode if there is a change in the
input signal's state.)
NOTE
The projector will automatically exit from MAGNIFY mode if either the INPUT SELECT,
AUTO, ASPECT or VIDEO feature is used, or, if there is a change in the input signal's state.
FREEZING THE SCREEN
1
PUSH
ENTER
MENU
POSITION
AUTO
MAGNIFY
RESET
PinP
VOLUME
ON
FREEZE
Press the FREEZE button
The [II] icon appears and the screen will freeze at
the current image. Press the FREEZE button again
and the [ ] appears as the projector exits FREEZE
mode.
FREEZE
▲
ESC
MUTE
OFF
WIRELESS
KEYSTONE ONE TOUCH
NOTE
• The projector will automatically exit from FREEZE mode if either the POSITION, VOLUME, MUTE, AUTO,
BLANK ON/OFF or MENU ON/OFF feature is used, or, if there is a change in the input signal's state.
• If the projector continues projecting the same image for a long time (i.e. you forget to exit FREEZE mode),
the image might possibly remain as an afterimage. Do not leave the projector in FREEZE mode for too long.
22
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ23
ADJUSTING SCREEN WITH ONE-TOUCH
FOCUS
ZOOM
PAGE
DOWN
BLANK
LASER
1
Press the ONE TOUCH button
ONE TOUCH
You can activate the following functions just by
pressing the ONE TOUCH button:
(1) Signal search: Cycle through input signals, displaying
the images of retrieved signals. If no signal is found,
returns to the signal that was selected before the search
was begun.
ASPECT
• When BNC (RGB) is selected:
PUSH
ENTER
RGB
ESC
MENU
RESET
POSITION
AUTO
PinP
BNC(RGB)
COMPONENT VIDEO
MAGNIFY
VOLUME
ON
FREEZE
VIDEO
• When BNC (COMPONENT) is selected:
MUTE
RGB
OFF
WIRELESS
S-VIDEO
DVI
BNC(COMPONENT)
DVI
KEYSTONE ONE TOUCH
COMPONENT VIDEO
S-VIDEO
VIDEO
(2) Automatic adjustment: In RGB mode, automatically
adjust the picture position and size; for VIDEO input,
automatically select the signal mode. ( 20 )
(3) Automatic keystone distortion correction: This is only
performed if ONE TOUCH of the AUTO menu is set to
TURN ON. When performed, the unit automatically corrects
vertical keystone distortion due to the (forward/backward)
setup angle of the main unit. (Vol.2 5 )
NOTES
• May not function properly with some input signals.
• This function takes about 10 seconds to display an image.
23
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ24
SELECTING THE ASPECT RATIO
DOWN
1
LASER
BLANK
Press the ASPECT button
RGB, DVI, COMPONENT VIDEO
(HDTV signals : 1125i (1035i/1080i), 750p)
4:3
16:9
VIDEO IN, S-VIDEO IN, COMPONENT VIDEO
(Non-HDTV signals : 525i, 525p,625i)
4:3
ASPECT
16:9
ASPECT
SMALL
PUSH
ENTER
ESC
MENU
RESET
POSITION
AUTO
PinP
TEMPORARILY BLANKING THE SCREEN
UP
FOCUS
ZOOM
PAGE
DOWN
BLANK
1
LASER
ASPECT
Press the BLANK button
The input signal screen is shut off, and a blank screen
appears. You can set the blank screen using the menu
(from the SCREEN menu, select BLANK). Press the BLANK
button again to remove the blank screen, and return to the
input signal screen.
BLANK
PUSH
ENTER
ESC
MENU
RESET
DISPLAYING CHILD WINDOW (P. IN. P: Picture in Picture)
1
ASPECT
ESC
MENU
RESET
POSITION
AUTO
PinP
MAGNIFY
VOLUME
ON
FREEZE
MUTE
OFF
24
You can display the video input in a child window while
displaying RGB, BNC, or DVI input.
Display child window
(small)
PUSH
ENTER
WIRELESS
Press the P. in P. Button
KEYSTONE ONE TOUCH
Display child window
(large)
No display
You can select the video input to display in the child
window, and the position of the child window, from the
INPUT menu. (Vol.2 4 )
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ25
USING THE MENU FUNCTIONS
LASER
INDICATOR
STANDBY/ON
VIDEO
RGB
FOCUS
ZOOM
PAGE
1
Press the MENU button
2
Use the lever switch
UP
DOWN
BLANK
LASER
press the
/
to select a menu, then
or ENTER button
The display of the selected menu appears.
[ex. Adjusting SHARPNESS]
Use the lever switch / to select PICTURE-1, then press the
or ENTER button.
ASPECT
PUSH
ENTER
ESC
MENU
RESET
POSITION
AUTO
PinP
MAGNIFY
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
WIRELESS
: SELECT
VOLUME
ON
FREEZE
PUSH
MUTE
ENTER
OFF
WIRELESS
MENU
The menu display appears on the screen. The projector
has the following menus: MAIN, PICTURE-1, PICTURE-2,
INPUT, AUTO, SCREEN, and OPTION, WIRELESS. When
you select a menu name using the lever switch / , the
current settings of items that can be manipulated from that menu are displayed.
COLOR BAL R
COLOR BAL B
SHARPNESS
COLOR
TINT
–1
+1
–1
+1
–1
KEYSTONE ONE TOUCH
3
Use the lever switch / to select SHARPNESS,
then press the
or ENTER button
The operation display of the selected item appears. To
adjust a numerical value, press the
or ENTER button
again to switch to the single menu (small display showing
only the operation display area).
[ex. Adjusting SHARPNESS]
Use the lever switch / to select SHARPNESS, then
press the
or ENTER button.
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
WIRELESS
: SELECT
PUSH
ENTER
NOTE
• For details about menu
operations, see the
separate "MULTI
FUNCTIONAL
SETTINGS" (Vol. 2).
4
Use the lever switch
/
COLOR BAL R
COLOR BAL B
SHARPNESS
COLOR
TINT
0
to adjust the level
Press the MENU button to hide the menu and finish your
operation. Alternatively, press the
or ESC button to
return to the previous display.
[ex. Adjusting SHARPNESS]
Use the lever switch / to adjust the sharpness.
25
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ26
OPERATING THE PC SCREEN
You can use the remote control as a simplified mouse or keyboard.
CAUTION Caution: Mistaken use of the mouse/keyboard control could damage your equipment.
• Only connect to a PC.
• Before connecting, read the manuals of the device you will connect.
• Do not unplug the connector cables while the computer is operating.
LASER
INDICATOR
STANDBY/ON
VIDEO
RGB
FOCUS
ZOOM
PAGE
UP
DOWN
BLANK
LASER
PS/2, ADB, Serial Mouse Control
1. Turn off the projector and PC power, and connect the projector’s
CONTROL terminal to the computer via the mouse cable.
2. If a USB cable is connected, disconnect it. If a USB cable is connected, the USB control
function is given priority, and mouse control from the CONTROL terminal will not function.
3. Turn on the projector power, then the computer.
The functions in the table below can be controlled. If you have difficulty with control,
restart the computer (either from the software or by pressing the restart button).
Available Functions
ASPECT
Remote Control Operation
Move Pointer
Move using
Left click with mouse
Press the center
Right click with mouse
Press the right mouse button
on the disk pad
of the disk pad
PUSH
ENTER
ESC
MENU
RESET
POSITION
AUTO
PinP
MAGNIFY
VOLUME
ON
FREEZE
1. Connect the projector’s USB terminal to a PC using a USB cable.
The functions in the table below can be controlled.
MUTE
Available Functions
OFF
WIRELESS
USB Mouse/Keyboard Control
Remote Control Operation
KEYSTONE ONE TOUCH
Move Pointer
Move using
Left click with mouse
Press the center
Right click with mouse
Press the keyboard’s
on the disk pad
of the disk pad
Press the right mouse button
keys
Press
Press the keyboard’s ENTER key
Press the ENTER button
Press keyboard’s PAGE UP key
Press PAGE UP button
Press keyboard’s PAGE DOWN key
Press PAGE DOWN button
Press keyboard’s ESC key
Press ESC button
NOTES
• It may not be possible to control notebook PCs, and other computers with built-in pointing devices (e.g.
track balls), using this remote control. In this case, before connecting go into BIOS (system setup) and
select external mouse, and disable the pointing devices. In addition, the mouse may not function if the
computer does not have the needed utility program. See your computer’s hardware manual for details.
• The USB control can be used with Windows 95 OSR 2.1 or higher. It may not be possible to
use the remote control, depending on the computer’s configurations and mouse drivers.
• The USB control can only be used for the functions listed above. You cannot do things like press two buttons
at once (for instance, pressing two buttons at the same time to move the mouse pointer diagonally).
• This function is not available while the lamp is warming up (the POWER indicator flashes green), while adjusting the volume and
display, correcting for trapezoidal distortion, zooming in on the screen, using the BLANK function, or displaying the menu screen.
26
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ27
THE LAMP
HIGH VOLTAGE
HIGH TEMPERATURE
HIGH PRESSURE
To replace the lamp, check the model number of the replacement lamp (sold separately) and
contact your local dealer.
Replacement lamp model number: DT00531
If the projector is mounted on the ceiling, or if the lamp has broken, ask your dealer to replace the
lamp. Lamp replacement is hazardous and should not be attempted by the user.
Before replacing the lamp, make sure the power switch is off and the power cable is not plugged in,
then wait at least 45 minutes for the lamp to cool sufficiently. Handling the lamp while hot can cause
burns, as well as damaging the lamp.
The LCD projector uses a glass lamp bulb. It is a mercury lamp with high
internal pressure. High-pressure mercury lamps can break with a loud
bang, or burn out, if jolted or scratched, or through wear over time. Each lamp has a
different lifetime, and some may burst or burn out soon after you start using them. In
addition, when the bulb bursts, it is possible for shards of glass to fly into the lamp housing,
and for gas containing mercury to escape from the projector’s vent holes.
• Do not open the lamp cover while the projector is suspended from above. This is
dangerous, since if the lamp’s bulb has broken, the shards will fall out when the cover is
opened. In addition, working in high places is dangerous, so ask your local dealer to have
the lamp replaced even if the bulb is not broken.
• Handle with care: jolting or scratching could cause the lamp bulb to burst during use.
• If the replace lamp indicator (see "Related Messages" (Vol.2 8 ) and "Regarding the
indicator Lamps" (Vol.2 9 )) comes on, replace the lamp as soon as possible. Using the
lamp for long periods of time, or past the replacement date, could cause it to burst. Do
not use old (used) lamps; this is a cause of breakage.
• If the lamp breaks soon after the first time it is used, it is possible that there are electrical problems
elsewhere besides the lamp. If this happens, contact your local dealer or a service representative.
• If the lamp should break (it will make a loud bang when it does), ventilate the room well, and make
sure not to breathe the gas that comes out of the projector vents, or get it in your eyes or mouth.
• If the lamp should break (it will make a loud bang when it does), unplug the power cord from
the outlet, and make sure to request a replacement lamp from your local dealer. Note that
shards of glass could damage the projector’s internals, or cause injury during handling, so
please do not try to clean the projector or replace the lamp yourself.
• Obey local ordinances when disposing of used lamps. In most cases, it is possible to dispose of used
bulbs in the same manner as used glass bottles, but in some cases, bulbs are sorted separately.
• Do not use the projector with the lamp cover removed.
WARNING
27
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ28
THE LAMP (continued)
Replacing the lamp
All projector lamps will wear out eventually. If used for long periods of time, the image could become
darkened, and the color contrast could be impacted as well. We recommend that you replace your lamps
early. If the LAMP indicator turns red, or a message prompts you to replace the lamp when you power up
the projector, the lamp needs to be replaced. (See "Related Messages" (Vol.2 8 ) and "Regarding the
Indicator Lamps" (Vol.2 9 ) for details.)
1
Turn off the projector, and unplug the
power cord. Allow the lamp bulb to cool
for at least 45 minutes, and prepare a
new lamp (serial number: DT00531)
4
Insert the new lamp, and
tighten the 3 screws firmly to
lock it in place
2
After making sure that the projector has
cooled adequately, slide the knob of a
lamp cover lock as shown in the figure.
Then, one side of the lamp cover is
raised. Pull up the lamp cover and
remove it, as shown in the figure
5
Interlocking the 2 tabs of the
lamp cover to the projector,
put the lamp cover on the
projector.
Then push the point of the
lamp cover to fix it, as shown
in the figure.
Make sure that the lamp
cover does’t come up
Knob of Lamp
Cover Lock
Tabs
PC
CO LAMP
PC
CO LAMP
3
Unscrew the 3 screws, and slowly pull
out the lamp by the handle
Push
• Be careful not to touch the inside of the lamp case.
6
PC
CO LAMP
PC
CO LAMP
Turn on the projector power,
and reset the lamp timer
• To reset the lamp timer, from the
OPTION menu, select the LAMP
TIME. (Vol.2 7 )
ATTENTION • Make sure that the screws are screwed in firmly. Loose screws could result in damage or injury.
• Do not use with lamp cover removed.
• Do not reset the lamp timer without replacing the lamp. Reset the lamp timer always when replacing
the lamp. The message functions will not operate properly if the lamp timer is not reset correctly.
• When the lamp has been replaced after the message of “CHANGE THE LAMP .....THE POWER
WILL TURN OFF AFTER 0 hr.” is displayed, or the LAMP indicator is red, complete the following
operation within 10 minutes of switching power on.
NOTE • The LAMP indicator is also red when the lamp unit reaches high temperature.
Before replacing the lamp, switch power off, wait approximately 20 minutes, and switch power on
again. If the LAMP indicator is still red, replace the lamp.
28
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ29
THE AIR FILTER
Caring for the air filter
The air filter should be cleaned about every 100 hours. If the LAMP indicator and
TEMP indicator blink red simultaneously, or a message prompts you to clean the air
filter when you turn on the unit, the filter needs to be cleaned. (See "Related
Messages" (Vol.2 8 ) and "Regarding the Indicator Lamps" (Vol.2 9 ) for details.)
1
Turn off the projector, and unplug the power cord
2
Apply a vacuum cleaner to
the top of the air filter cover
to clean the air filter
Air Filter Cover
3
Turn on the projector, and use the menu to reset the filter
timer
• To reset the air filter timer, from the OPTION menu, select FILTER TIME.
29
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ30
THE AIR FILTER (continued)
Replacing the air filter
If the soiling will not come off the air filter, or it becomes damaged, then it needs to be
replaced. Please contact your local dealer, after confirming the model of your
separately sold replacement air filter.
Replacement air filter model: NJ07081
1
Turn off the projector, and unplug the power cord. Prepare a
new air filter (one specified for your projector)
2
Remove the air filter cover and air filter
3
Insert the new filter, and replace the
filter cover
4
Turn on the projector power, and using the menu, reset the
filter timer
• To reset the lamp timer, from the OPTION menu, select FILTER TIME.
ATTENTION • Make sure to turn off the power and unplug the power cord before caring for
the unit. Please carefully read "Safety Instructions", in order to care for your projector correctly.
• Do not use with air filter cover removed.
• If the air filter becomes clogged by dust or the like, internal temperature rises and could cause
malfunction. The power is automatically turned off in order to prevent the unit from overheating
internally.
30
01CP-X885W/Vol1/E-責 02.10.8 9:05 PM ページ31
OTHER CARE
Caring for the inside of the projector :
In order to ensure the safe use of your projector, please have it cleaned and inspected by
your local dealer about once every 2 years. Never try to care for the inside of the unit
yourself. Doing so is dangerous.
Caring for the lens :
Lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the
lens directly with your hand.
Caring for the cabinet and remote control transmitter :
Wipe lightly with gauze or a soft cloth. If soiling is severe, dip a soft cloth in water or a
neutral cleanser diluted in water, and wipe lightly after wringing well. Then, wipe lightly
with a soft, dry cloth.
ATTENTION • Make sure to turn off the power and unplug the power cord before caring for
the unit. Please carefully read "Safety Instructions" in this manual, in order to care for your projector
correctly.
• Do not use cleaners or chemicals other than those listed above, including benzene and paint
thinner.
• Do not use aerosols or sprays.
• Do not polish or wipe with hard objects.
31