Doro PhoneEasy 611
®
English
17
18
19
English
1. Earpiece
2. Camera shortcut
3. Left selection button
4. Call button
5. Speed dial
6. Voice mail
7. Silent/Input method
8. Microphone
9. SMS shortcut
10. Arrow buttons
11. End call/Power on/off
12. Right selection button
13.
14.
15.
16.
17.
18.
19.
20.
21.
Camera lens
Charging socket
Headset socket
LED light (Red=Battery level
low / charging, Green=New
message / Missed call)
Emergency button
Loudspeaker
Volume control
Lanyard (not included)
Charging stand (not
included)
20
21
English
Contents
Installation ................................................................................ 1
Installing the SIM card, memory card and the battery ............. 1
Charging .................................................................................... 3
Symbols .................................................................................... 4
Assistive functions ............................................................... 4
Phone indicators .................................................................. 4
Display status symbols ......................................................... 4
Display main symbols........................................................... 5
Operation................................................................................... 6
Activating the phone ............................................................ 6
Making a call....................................................................... 7
Making a call from the Phonebook......................................... 7
Receiving a call ................................................................... 7
Volume control..................................................................... 7
................................................................... 8
Entering text
Call options ......................................................................... 9
Call waiting ......................................................................... 9
Call information ...................................................................10
......................................................................10
Speed dial
Silent..................................................................................10
Headset ..............................................................................10
SOS calls ............................................................................10
Assistance button
............................................................11
Phonebook .................................................................................13
Creating a phonebook entry...................................................13
Creating ICE entry (In Case of Emergency) .........................13
Managing phonebook entries.................................................13
ICE (In Case of Emergency) .....................................................15
Messages ...................................................................................16
Creating and sending SMS....................................................16
Creating and sending voice message ......................................17
Creating and sending MMS ...................................................17
Inbox, Sent, Outbox .............................................................19
Call log......................................................................................20
Retrieving and dialling..........................................................20
Camera (take photos) ..................................................................21
English
Camera, options...................................................................21
Camera adjustments.............................................................21
Image viewer..............................................................................22
Image viewer, options...........................................................22
Connecting the phone to a computer ............................................23
Drag and drop content between phone and a computer ...........24
Disconnect the USB cable safely...........................................24
Settings .....................................................................................24
General ...............................................................................24
Sound .................................................................................28
Display................................................................................30
Calls ...................................................................................31
Messages ............................................................................35
Camera ...............................................................................39
Assistance .......................................................................39
Bluetooth ...........................................................................41
Security ..............................................................................43
File manager .......................................................................45
Additional functions....................................................................47
Alarm..................................................................................47
Organizer ............................................................................47
Calculator............................................................................48
FM radio .............................................................................49
Games ................................................................................50
Instructions for the REMOTE USER.......................................51
Troubleshooting ..........................................................................55
Safety instructions......................................................................56
Network services and costs ...................................................57
Operating environment .........................................................57
Medical units ......................................................................57
Areas with explosion risk ......................................................58
Li-ion battery.......................................................................58
Protect your hearing .............................................................58
Emergency calls...................................................................59
Vehicles ..............................................................................59
Care and maintenance ................................................................60
Warranty ....................................................................................60
Specifications ............................................................................60
®
English
Hearing aid .........................................................................61
Specific Absorption Rate (SAR) .............................................61
Declaration of Conformity .....................................................61
English
Installation
IMPORTANT!
Turn off the phone and disconnect the charger before removing the
battery cover.
Installing the SIM card, memory card and the battery
The SIM and memory card holders are located inside the battery
compartment.
GB
S IM
1
1.
2.
3.
4.
2
4
3
Remove the battery cover and the battery if it is already installed.
Insert the SIM card by gently sliding it into the holder. Make sure
that the SIM card’s contacts are facing inwards and that the cut
off corner is pointing downwards. Take care not to scratch or
bend the contacts on the SIM card.
To insert a memory card by gently sliding it into the holder. Make
sure that the memory card’s contacts are facing inwards and that
the cut off corner is pointing upwards. Take care not to scratch or
bend the contacts on the memory card.
To remove the memory card: find the small ridge on the exposed
end of the memory card. Put your fingernail into the ridge and
gently pull the memory card out.
Insert the battery by sliding it into the battery compartment with
the contacts facing upwards to the left. Replace the battery cover.
1
English
IMPORTANT!
Use only compatible memory cards for use with this device. Compatible
card type: microSD, microSDHC.
Incompatible cards may damage the card itself, the device and corrupt
data stored on the card. Depending on the market some phones may
have a pre-installed memory card.
2
English
Charging
CAUTION
Only use batteries, charger and accessories that have been approved for
use with this particular model. Connecting other accessories may be
dangerous and may invalidate the phones type approval and guarantee.
When the battery is running low,
is displayed and a warning signal
is heard. To charge the battery, connect the mains adapter to a wall
socket and to the charging socket y.
is displayed briefly when the charger is connected to the phone,
and
when it is disconnected. The battery charge indicator will
be animated while charging. It takes approximately 3 hours to fully
charge the battery.
is displayed on the screen when charging is completed. If the
phone is turned off when the charger is connected to the phone only
the battery charge indicator will be shown on the display.
Note!
To save power the LCD backlight goes off after a while. Press any button
to illuminate the display. Full battery capacity will not be reached until
the battery has been charged 3–4 times. Batteries degrade over time,
which means that call time and standby time will normally decrease
with regular use.
Save energy
When you have fully charged the battery and disconnected the charger
from the device, unplug the charger from the wall outlet.
3
English
Symbols
Assistive functions
The following symbols indicate information in the manual about
assistive functions for:
Seeing
Handling
Hearing
Safety
Phone indicators
LED light on the phone will:
•
•
flash green when you have a new message or a missed call. After
reading the new message/missed call, the flashing will stop.
flash red when the battery is running low and during charging.
Display status symbols
Signal strength
No network coverage
Ring only
5
Unread message in Inbox
Ring + vibration
Alarm active
Vibration only
Battery level
Silent
Call forward activated
Bluetooth on, visible to
others
Bluetooth on, invisible to
others
Roaming (in other network)
Missed call
Headset connected
Bluetooth connected
Voice mail message
received
4
English
Display main symbols
Mute
Charger connected
Message sending
successful
Charger removed
Message sending failed
Headset in
Error
Headset out
Warning
Speaker on
Query
Speaker off
Done (confirmed)
Incoming call
New message
Outgoing call
Battery level low
Call ended
Searching
Missed call. Press Read to
see the missed calls.
Assistance call
Call on-hold
vCard message
SOS calls only
Volume control
Processing, please wait
5
English
Operation
Activating the phone
Press and hold the red button
Confirm with Yes to power off.
on the phone to turn it on/off.
If the SIM card is valid but protected with a PIN code (Personal
Identification Number), PIN is displayed. Enter the PIN code and
press OK (
upper left corner of keypad). Delete with Clear (
upper right corner of keypad).
Note!
If PIN and PUK codes were not provided with your SIM card, please
contact your service provider.
Attempts: # shows the number of PIN attempts left. When no more
attempts remain, PIN blocked is displayed. The SIM card must now
be unlocked with the PUK code (Personal Unblocking Key).
1.
2.
3.
Enter the PUK code and confirm with OK.
Enter a new PIN code and confirm with OK.
Re-enter new PIN code and confirm with OK.
Start-up wizard
When starting the telephone for the first time, you can use the
Start-up wizard to set some basic settings.
Press Yes to change or No if you do not want to change.
Tip:
You can run the Start-up wizard later if you want, see Start-up wizard,
p.25.
Standby (Idle mode)
When the phone is ready to use, and you have not keyed in any
characters, the phone is in standby.
Left selection button in standby is Menu.
Right selection button in standby is Name.
Tip:
You can always press
to return to standby.
6
English
Changing the language, time and date
The default language is determined by the SIM card. See General,
p.24 on how to change language, time and date.
Making a call
1.
2.
3.
Enter the phone number including the area code. Delete with
Clear.
Press
to dial. Press Abort to cancel dialling.
Press
to end the call.
Tip:
For international calls, always use + before the country code for best
operation. Press * twice for the international prefix +.
Making a call from the Phonebook
1.
2.
3.
Press Name to open the phonebook.
Use the arrow buttons
/
to scroll through the phonebook or
quick search by pressing the key corresponding to the first letter
of the entry, see Entering text
, p. 8 .
Press Call to dial the selected entry, or press Back.
Receiving a call
To answer an incoming call when the flip is closed, open the flip.
To answer an incoming call when you have set Open to answer to Off,
see Answer mode, p.33.
1.
2.
Open the flip and press
to answer, or press Silent to switch
off the ring signal and then Reject to reject the call (busy signal).
Alternatively, press
to reject the call directly.
Press
to end the call.
Tip:
Press and hold + or – to temporarily switch off the ring signal without
opening the flip.
Volume control
Use the side buttons +/– to adjust the sound volume during a call.
The volume level is indicated on the display. If you use hearing
aid or have hearing difficulties when using the telephone in noisy
7
English
environment, you can customise the phones audio settings, see Audio
setup , p.28.
Entering text
Press a numerical key repeatedly until the desired character is shown.
Wait a few seconds before entering the next character.
Press * for a list of special characters. Select the desired character
with
/
and press OK to enter it.
Use the side keys +/– or
/
to move the cursor within the text.
Press # to cycle upper case, lower case and numerals.
Press and hold # to change input language.
Entering text with predictive text
In some languages you can use the Smart ABC (eZiType™) input
method which uses a dictionary to suggest words. See Predictive text
, p.35 on how to activate predictive text.
Press each key once, even if the displayed character is not the one
you want. The dictionary will suggest words based on the keys you
have pressed.
1.
2.
3.
To write the word “Fred”, press 3, 7, 3, 3. Complete the
word before looking at the suggestions.
Use
/
to view the suggested words.
Press Select and continue with the next word.
Alternatively, press 0 to continue with the next word.
If none of the suggested words are correct, use manual input mode.
The icon on the top left of the display indicates the input mode:
Abc
ABC
abc
Abc
ABC
abc
123
Sentence case with predictive text
UPPER CASE with predictive text
lower case with predictive text
Sentence case
UPPER CASE
lower case
Numerals
8
English
Call options
During a call the selection buttons1 (
functions:
) give access to additional
Options (left selection button)
A menu with the following options is displayed:
Hold single
call/Retrieve
single
End single
call
New call
Phonebook
Messages
Mute
Hold/retrieve the current call.
End the current call (same as
).
Call another number (Conference).
Search the phonebook.
Write or read SMS messages.
Disable the microphone.
SPK on (right selection button)
Activates handsfree mode, which allows you to speak without holding
the phone. Speak clearly into the microphone at a maximum distance
of 1 m. Use the side keys +/– to adjust the loudspeaker volume. Press
SPK off to return to normal mode.
Note!
The handsfree function allows only one person at a time to talk.
Switching between talk/listen is triggered by the sound of the person
talking. Loud noises (music, etc.) in the background may interfere
with the function.
Call waiting
An alert tone will be heard if there is an incoming call while talking.
To put the current call on hold and answer the incoming call, press
Options, select Answer and then OK.
1. selection buttons have multiple functions. The current key function is
shown above the selection button on the display.
9
English
Tip:
Call waiting must be activated, see Call setup, p.33.
Call information
During a call, the outgoing or incoming phone number and the
elapsed call time is displayed. If the identity of the caller is withheld,
Unknown is displayed.
Speed dial
You can use keys A, B and C and you can also use the numerical
keys 0 and 2–9. To speed dial an entry from standby, press and
hold the corresponding key. See Speed dial
, p.32.
Silent
Silent is a fixed profile with Keypad tone, Message tone and Ring tone
disabled, while Vibration, Tasks and Alarm are unchanged.
Tip:
Press and hold shortcut button # to activate/deactivate Silent.
Headset
When a headset is connected, the internal microphone in the phone is
automatically disconnected.
When receiving a call you can use the answer key on the headset
cable (if it has one) to answer and end calls.
CAUTION
Using a headset at high volume may damage your hearing. Adjust the
volume level carefully when using a headset.
SOS calls
As long as the phone is switched on, it is always possible to make an
emergency call by entering the main local emergency numberfor your
present location followed by
.
Some networks accept calls to emergency numbers without a valid
SIM card. Contact your service provider for more information.
10
English
Assistance button
IMPORTANT!
Always inform recipients in the Number list that they are listed as your
assistance contacts.
CAUTION
When an assistance call is activated the phone is pre-set to
handsfree/speakerphone mode. Do not hold the device near your ear
when the handsfree mode is in use, because the volume may be
extremely loud.
The Assistance button allows easy access to contact your predefined
help numbers (Number list) should you need help. The Assistance
function may need to be activated before use. See Assistance ,
p.39 on how to activate as described or with 3 button presses, how to
enter recipients in the numbers list, and how to edit the text message.
•
•
•
•
Press and hold the Assistance button for 3 seconds, or press it
twice within 1 second. The assistance call begins after a delay of
5 seconds. In this time you can prevent a possible false alarm
.
by pressing
An assistance SMS is sent to all recipients.
The first recipients in the list is dialled. If the call is not
answered within 25 seconds, the next number is dialled. Dialling
is repeated 3 times or until the call is answered, or until
is pressed.
The assistance function may be configured so that the receiver
of the call must press "0" (zero) to confirm, in order to stop the
alarm sequence. If there is a risk that the assistance call will be
answered by a voice mail/answering service, please activate the
function Confirm with "0". See Confirm with "0", p.40.
11
English
Note!
Some private security companies can accept automatic calls from their
clients. Always contact the security company before using their phone
number.
IMPORTANT!
Information to the receiver of an assistance call, when Confirm with
"0" is activated:
•
•
•
•
After receiving the assistance message, each number in the
Number list will be called sequentially.
To confirm the assistance call, the receiver needs to press 0.
If the receiver doesn’t press 0 within 60 seconds (after
answering) the call will be disconnected and the next number
in sequence will be called.
If the receiver presses 0 within 60 seconds, the call is
confirmed and no further call attempts will be made (assistance
sequence interrupted).
12
English
Phonebook
The phonebook can store 300 entries with 3 phone numbers to each
entry.
Creating a phonebook entry
1.
2.
Press Menu, scroll to
and press OK.
Select -New contact- and press Add.
3.
Enter a
Name for the contact, see Entering text
, p. 8 .
Delete with Clear.
Use
/
to select
Mobile,
Home or
Office, and enter
the phone number(s) including the area code.
4.
5.
Select
Picture and press Edit to associate a picture to the
contact.
This picture will be displayed when you call the corresponding
contact or when they are calling you, see Phonebook picture,
p.27.
• Select Take picture and press OK to use the camera to take
a picture.
• Select My pictures and press OK to select an existing picture.
6.
Press Save.
Tip:
For international calls, always use + before the country code for best
operation. Press * twice for the international prefix +.
Creating ICE entry (In Case of Emergency)
With this additional information and medical information, first
responders can access this information from the victim's phone in
case of emergency. In the event of a trauma, it is critical to have this
information as early as possible which can increase the chances of
survival. All fields are optional, but the more information provided the
better. See ICE (In Case of Emergency) , p.15 on how to configure
your ICE information.
Managing phonebook entries
1.
Press Menu, scroll to
and press OK.
13
English
2.
3.
Select a contact and press Options.
Select one of the following options and press OK.
View
Show details for the selected contact.
Edit
1.
2.
Use
/
to move the cursor. Delete with Clear.
Press Save.
Add
See Creating a phonebook entry, p.13.
Call
Press OK to call the contact.
Send SMS
Press OK to write a SMS message, see Creating and sending SMS,
p.16.
Send MMS
Press OK to write a MMS message, see Creating and sending MMS,
p.17.
Delete
Press OK to delete the selected phonebook entry. Press Yes to confirm
or No to abort.
Delete all
Select From SIM or From phone and press OK to delete all phonebook
entries from the SIM card or phone memory.
Enter the phone code and press OK to confirm. The default phone
code is 1234.
Copy all
Select From SIM and press Select to copy all phonebook entries
from the SIM card to the phone memory. Press Yes to confirm or
No to abort.
14
English
Select From phone and press Select to copy all phonebook entries
from the phone memory to the SIM card. Press Yes to confirm or
No to abort.
Send vCard
Select Send by SMS and press OK to send the selected phonebook
entry as a vCard via SMS. Enter the phone number of the recipient.
Alternatively use the arrow keys
/
to scroll through the
phonebook, or quick search by pressing the key corresponding to the
first letter of the entry, see Entering text
, p. 8 . Press OK to send.
Select Send by MMS and press OK to send the selected phonebook
entry as a vCard via MMS. Type your message, then press Options. Add
items to your message from the options Add subject, Add picture, Add
sound and Add video. Add recipients with To and Send when ready.
Select Send by Bluetooth and press OK to send the selected
phonebook entry as a vCard via Bluetooth . See Bluetooth , p.41 on
how to connect with Bluetooth.
®
®
ICE (In Case of Emergency)
First responders can access important information such as medical
information from the victim's phone in case of emergency. In the
event of a trauma, it is critical to have this information as early as
possible to increase the chances of survival. All fields are optional,
but the more information provided the better.
1.
2.
3.
Press Menu, scroll to
and press OK.
Select
and press OK, then use
/
to scroll the list of
entries.
Press Edit to add or edit information in each entry, see Entering
text
, p. 8 . Delete with Clear. Press Save when done.
Name:
Birth:
Height:
Weight:
Language:
Your
Your
Your
Your
Your
own name.
date of birth.
height.
weight.
language.
15
English
Insurance:
Contact 1:
Contact 2:
Doctor:
Condition:
Allergies:
Blood type:
Vaccination:
Medication:
Other info:
Your insurance provider and policy number.
Press Options and then OK to Add or Delete a
contact from the phonebook, or Save to accept the
current entry. If possible, add your relationship to
your ICE contacts in the phonebook, such as “ICE
Wife Mary Smith”.
Any medical conditions/medical devices (e.g.
diabetic, pacemaker).
Any known allergies (e.g. penicillin, bee stings).
Your blood type.
Any relevant vaccinations.
Any medication that you are treated with.
Other information (e.g. organ donor, living will,
consent to treat).
Messages
Creating and sending SMS
Note!
Before you can send any SMS, you need to save your message centre
number. The number to your service centre is supplied by your service
provider and is usually set on the SIM card. If not, you can enter the
number yourself. See Profile set, p.36.
1.
2.
3.
4.
5.
6.
Press shortcut button
or press Menu, scroll to
and press
OK.
Select SMS and press OK.
Type your message, see Entering text
, p. 8 , then press To.
Select a recipient from the Phonebook and press Add.
Alternatively, select Enter number and press Select to add
recipient manually and press Done.
Select Add to add more recipients or select Send to send and
then press OK.
You can also modify the recipients by selecting one and press
Options to Edit, Delete or Delete all.
16
English
Note!
If you choose to add multiple recipients, you will be charged for each
recipient (maximum 10). For international calls, always use + before
the country code for best operation. Press * twice for the international
prefix +.
Creating and sending voice message
A voice message use the same technology as an MMS. Both you and
the recipient must have subscriptions that support MMS. The settings
for MMS is supplied by your service provider and can be sent to
you automatically via SMS. If not, see MMS settings, p.37 on how
to set your MMS profile.
1.
2.
3.
4.
5.
6.
Press Menu, scroll to
and press OK.
Select Voice message and press OK.
Recording will start immediately. Press Stop when done and
press Yes to save.
Select a recipient from the Phonebook and press Add.
Alternatively, select Enter number and press Select to add
recipient manually and press Done.
Select Add to add more recipients or select Send to send and
then press OK.
You can also modify the recipients by selecting one and press
Options to Edit, Delete or Delete all.
Note!
If you choose to add multiple recipients, you will be charged for each
recipient (maximum 10). For international calls, always use + before
the country code for best operation. Press * twice for the international
prefix +.
Creating and sending MMS
A MMS message can contain text and media objects such as pictures,
sound recordings and video. Both you and the recipient must have
subscriptions that support MMS. The settings for MMS is supplied by
your service provider and can be sent to you automatically via SMS. If
not, see MMS settings, p.37 on how to set your MMS profile.
1.
Press Menu, scroll to
and press OK.
17
English
2.
3.
4.
5.
Select MMS and press OK.
Type your message, see Entering text
, p. 8 , then press
Options.
Add items to your message from the options Add subject, Add
picture, Add sound and Add video.
Add recipients with To and Send when ready.
Add subject
1.
2.
Select Add subject and press OK.
Type your subject, then press Done.
Add picture
1.
2.
3.
4.
5.
Select Add picture and press OK.
Select My pictures and press OK
Alternatively, select Take picture and press OK for using the
camera to take a picture.
Select Phone/Memory card and press Open.
Select a folder, eg Photos and press Open.
Select a file and press OK.
Add sound
1.
2.
3.
4.
5.
Select Add sound and press OK.
Select My sounds and press OK.
Alternatively, select Record sound and press OK for using the
microphone to record sound. Recording will start immediately.
Press Stop when done and press Yes to save.
Select Phone/Memory card and press Open.
Select a folder, eg Audio and press Open.
Select a file and press OK.
Add video
1.
2.
3.
4.
5.
Select
Select
Select
Select
Select
Add video and press OK.
My videos and press OK.
Phone/Memory card and press Open.
a folder, eg Received and press Open.
a file and press OK.
18
English
Add recipients (To)
Select To and press OK to select recipient from Phonebook and
press Add.
Alternatively, select Enter number and press Select to add
recipient manually and press Done.
Select Add to add more recipients or select Send to send and
then press OK.
You can also modify the recipients by selecting one and press
Options to Edit, Delete or Delete all.
1.
2.
3.
Inbox, Sent, Outbox
/
SMS/MMS unread
/
SMS/MMS sent
/
SMS/MMS read
/
SMS/MMS unsent
1.
2.
3.
4.
Press Menu, scroll to
and press OK.
Select Inbox/Sent/Outbox and press OK.
Select a message and press Read.
Use
/
to scroll the message up/down.
Press Options for the following options:
View (MMS only)
To view the message.
Call
Press OK to call the contact.
Resend
Send again to the same receiver.
Reply
Type your reply, then press Done. The message will be sent
immediately.
Delete
Press Yes to delete the message, or No to return.
Download/Cancel download
If the message has not downloaded yet, press Download.
19
English
Edit
Edit the message, then press Send.
Forward
Forward a message. Edit the message (if desired), then press Send.
Use number
Displays all phone numbers contained in the message as well as the
sender's number.
Call
Save
Send SMS
Send MMS
Call the selected number.
Save the number in the Phonebook.
Write a new SMS message.
Write a new MMS message.
Save objects (MMS only)
To save text and media objects such as pictures, sound recordings
and video.
Details (MMS only)
To view details of the message.
Call log
Received, missed and dialled calls are saved in a combined call log.
20 calls of each type can be stored in the log. For multiple calls
relating to the same number, only the most recent call is saved.
Retrieving and dialling
1.
2.
Press
.
Alternatively, press Menu, scroll to
and press OK.
Use
/
to scroll through the Call log.
Received call
Dialled call
Missed call
20
English
3.
Press
settings:
View
Delete
Delete all
Save
to dial the number or press Options for the following
Show details for the selected call.
Delete the call.
Delete all calls in the Call log.
Save the number in the Phonebook.
Camera (take photos)
To get sharp photos, wipe the lens clean with a dry cloth.
1.
2.
3.
Press shortcut
or press Menu, scroll to
and press OK.
Press
to take photo.
Press Options or Back (if you do not make any selection the
picture is saved).
Camera, options
Send
Select an option, then press OK:
Send by
MMS
Send by
Bluetooth
Send as MMS. Press OK to create a message, see Creating
and sending MMS, p.17.
Send to other Bluetooth devices, see Bluetooth®, p.41.
Delete
Press OK to delete selected image. Press Yes to confirm or No to
return.
Use
Select an option from the list, then press OK.
Wallpaper
Phonebook
picture
Save as display background. Press OK
Save as phonebook contact. Press OK.
Camera adjustments
•
Use
/
to zoom in and out.
21
English
•
Use the side buttons +/– to adjust EV/Light sensitivity.
Note!
Zoom may reduce image quality.
For more camera settings, see Camera, p.39.
Image viewer
View your saved images.
1.
2.
3.
Press Menu, scroll to
and press OK.
Select an image, then press Options.
Select one of the following options and press OK.
Image viewer, options
View
Single view. Press Back when done.
Send
Select an option, then press OK:
Send by
MMS
Send by
Bluetooth
Send image as MMS. Press OK to create a message, see
Creating and sending MMS, p.17.
Send image to other Bluetooth devices, see Bluetooth®,
p.41.
Delete
Press OK to delete selected image. Press Yes to confirm or No to
return.
Use
Select an option from the list, then press OK to confirm.
Wallpaper
Phonebook
picture
Save as display background. Press OK.
Save as phonebook contact. Press OK.
Details
View detailed information about the file, e.g. date, size, copyright.
22
English
Rename
Rename image. Delete with Clear and press Done to confirm.
Browse style
You can change image view. Default is Large, you can also select
List or Medium.
In List the file name, the date and the size of the image is shown.
Sort by
Select if you want to sort your images by Name or Time.
Storage
Select where the phone should save files if you have memory card
installed.
Delete all
Press OK to delete all images. Press Yes to confirm or No to return.
Connecting the phone to a computer
y
Connect the phone to a computer and start transferring pictures,
music and other file types. All you have to do is connect a USB cable
between the phone and computer. From your computer's file explorer,
you can drag and drop content between your phone and the computer.
Note!
You might not be able to transfer some copyright-protected material.
23
English
Drag and drop content between phone and a computer
1.
2.
3.
Connect your phone to a computer using a USB cable.
Wait until the phone/memory card appears as external disks in
the file explorer.
Drag and drop selected files between the phone and the computer.
Note!
When the phone/memory card is mounted to the computer, the phone
cannot access the memory card. Some functionality and applications in
the phone, such as the camera, may not be accessible.
You can transfer files by using a USB cable on most devices and
operating systems supporting a USB Mass Storage interface.
Disconnect the USB cable safely
1.
2.
Make sure to enable the hardware to be safely removed.
Disconnect the USB cable.
Note!
Do not disconnect the USB cable when transferring content as this
may corrupt the content.
Computer instructions may vary depending on your operating system.
See the documentation of your computer's operating system for more
information.
Settings
Note!
The settings described in this chapter are carried out in standby mode.
Press
to return to standby mode.
General
Time & date
Setting the time and date
1. Press Menu, scroll to
and press OK.
2. Select General and press OK.
3. Select Time & date and press OK.
4. Select Set time and press OK.
5. Enter the time (HH:MM), then press OK.
24
English
6.
7.
Select Set date and press OK.
Enter the date (DD/MM/YYYY), then press OK.
Setting the time/date format
1. Press Menu, scroll to
and press OK.
2. Select General and press OK.
3. Select Time & date and press OK.
4. Select Set format and press OK.
5. Select Time format and press OK.
6. Select 12 hours or 24 hours and press OK.
7. Select Date format and press OK.
8. Select the desired date format and press OK.
Setting Auto time on/off
1. Press Menu, scroll to
and press OK.
2. Select General and press OK.
3. Select Time & date and press OK.
4. Select Auto time and press OK.
5. Select On/Off and press OK.
To set the phone to automatically update the time and date according
to the current time zone, select On. Automatic update of date and
time does not change the time you have set for the alarm clock or the
calendar. They are in local time. Updating may cause some alarms you
have set to expire. Depending on network support and subscription.
Language
The default language for the phone menus, messages etc. is
determined by the SIM card. You can change this to any other
language supported by the phone.
1.
2.
3.
4.
Press Menu, scroll to
and press OK.
Select General and press OK.
Select Language and press OK.
Scroll
/
to select a language, then press OK.
Start-up wizard
Use the Start-up wizard to set some basic settings.
25
English
Press Yes to change Language, Time & date, Ring tone, Volume, Text
size. Press No if you do not want to change.
Owner number
The phone numbers assigned to your SIM card are saved if this is
allowed by the card.
To view/edit the numbers:
1.
2.
3.
Press Menu, scroll to
and press OK.
Select General and press OK.
Select Owner number and press OK.
See Phonebook, p.13 on how to add names/numbers.
To edit or delete an existing entry, select it and press Options, then
select Edit or Delete and press OK.
Block function
You can disable functions to simplify the use of the phone.
1.
2.
3.
4.
5.
Press Menu, scroll to
and press OK.
Select General and press OK.
Select Block function and press OK.
Select each function you want to disable and press Off.
Press Done to confirm.
Network setup
Your phone automatically selects your (service providers) home
network if this is within range. If not within range, you may use
another network, provided your network operator has an agreement
that allows you to do so. This is called roaming. Contact your service
provider for more information.
1.
2.
3.
4.
Press Menu, scroll to
and press OK.
Select General and press OK.
Select Network setup and press OK.
Select one of the following options and press OK to confirm.
New search
Perform new search if connection is lost.
26
English
Select network
To view available networks, press Select network. A list of available
network operators is displayed (after a short delay). Select desired
operator and press OK.
Network mode
To select another network, select Network mode and then select one
of the following options.
Automatic
Manual
Network is selected automatically.
Network is selected manually. Use Select network to
select desired operator.
Services
This menu may contain pre-programmed services from your network
provider. Depending on network support and subscription.
1.
2.
3.
Press Menu, scroll to
and press OK.
Select General and press OK.
Select Services and press OK.
Phonebook storage
1.
2.
3.
4.
Press Menu, scroll to
and press OK.
Select General and press OK.
Select Phonebook storage and press OK.
Select one of the following options and press OK.
SIM
Phone
1 phone number per contact. Number and length of the
phone numbers/contacts that can be stored will vary
depending on SIM card/service provider preferences.
300 contacts with 3 phone numbers each Mobile, Home
or Office.
Phonebook picture
You can change the phonebook view mode. Select On to see the
contacts associate picture (Picture), or select Off to display only the
names of contacts.
1.
2.
Press Menu, scroll to
and press OK.
Select General and press OK.
27
English
3.
4.
Select Phonebook picture and press OK.
Select On or Off and press OK.
Sound
Note!
Silent needs to be set to Off to access Tone setup, Volume, Alert type
and Extra tone. See Silent, p.29.
Audio setup
If you use a hearing aid or have hearing difficulties when using the
telephone in a noisy environment, you can customise the phones
audio settings.
1.
2.
3.
4.
Press Menu, scroll to
and press OK.
Select Sound and press OK.
Select Audio setup and press OK.
Select one of the following options and press OK.
Normal
Medium
High
For normal hearing in normal conditions.
For mild hearing impairment or usage in noisy
environment.
For moderate hearing impairment or usage in very noisy
environment.
Tone setup
1.
2.
3.
4.
5.
6.
Press Menu, scroll to
and press OK.
Select Sound and press OK.
Select Tone setup and press OK.
Select Ring tone and press OK.
Scroll
/
to select one of the available melodies, the melody
will be played. Press OK to confirm or Back to discard changes.
Set up the other features tones in the same way.
Ringtone volume
1.
2.
3.
4.
Press Menu, scroll to
and press OK.
Select Sound and press OK.
Select Volume and press OK.
Scroll
/
to change the ring volume, then press OK.
28
English
Silent
1.
2.
3.
4.
Press Menu, scroll to
and press OK.
Select Sound and press OK.
Select Silent and press OK.
Select On or Off and press OK.
Tip:
Press and hold shortcut button # to activate/deactivate Silent mode.
Alert type
Incoming calls can be signalled by a ring tone and/or vibration.
1.
2.
3.
4.
Press Menu, scroll to
and press OK.
Select Sound and press OK.
Select Alert type and press OK.
Scroll
/
to select signalling mode, then press OK.
Ring only
Vib. only
Vib. and ring
Vib. then
ring
Silent
Ring tone only.
Vibration only.
Vibration and ring tone.
Starts with vibration and adds ring tone after a short
while.
No sound or vibration, the display light is lit.
Extra tone
Warning and error tones are used to alert you of low battery power,
phone and SIM card errors etc.
1.
2.
3.
4.
5.
6.
Press Menu, scroll to
and press OK.
Select Sound and press OK.
Select Extra tone and press OK.
Select Warning and press On/Off to enable/disable.
Select Error and press On/Off to enable/disable.
Press Done to save.
29
English
Display
Wallpaper
You can select different display backgrounds.
1.
2.
3.
4.
5.
Press Menu, scroll to
and press OK.
Select Display and press OK.
Select Wallpaper and press OK.
Scroll
/
to display available wallpapers.
Press OK to confirm or Back to discard changes.
Text size
You can customise the text size for messages and the phonebook.
1.
2.
3.
4.
Press Menu, scroll to
and press OK.
Select Display and press OK.
Select Text size and press OK.
Select Normal or Large and press OK.
Idle display
In standby mode the display can show clock only, clock and the
service provider or all information.
1.
2.
3.
4.
Press Menu, scroll to
and press OK.
Select Display and press OK.
Select Idle display and press OK.
Select Clock only, Clock & Operator or All info and press OK.
Themes
You can select different themes to personalise the phones display
text and background.
1.
2.
3.
4.
5.
Press Menu, scroll to
and press OK.
Select Display and press OK.
Select Themes and press OK.
Scroll
/
to select a theme.
Press OK to confirm or Back to discard changes.
LCD backlight
Select the delay time for the display backlight.
30
English
1.
2.
3.
4.
Press Menu, scroll to
and press OK.
Select Display and press OK.
Select LCD backlight and press OK.
Select 15 sec., 30 sec. or 1 min and press OK.
Brightness
You can customise the phones brightness settings.
1.
2.
3.
4.
Press Menu, scroll to
and press OK.
Select Display and press OK.
Select Brightness and press OK.
Select Level 1–Level 3 and press OK.
Calls
Voice mail
If your subscription includes an answering service, callers can leave
a voice mail message when you cannot answer a call. Voice mail
is a network service and you may need to subscribe to it first. For
more information and for the voice mail number, contact your service
provider.
1.
2.
3.
4.
5.
6.
Press Menu, scroll to
and press OK.
Select Calls and press OK.
Select Voice mail and press OK.
Select Empty and press Add.
Select Phonebook to add a contact from the Phonebook.
Alternatively, press Manual. See Phonebook, p.13 on how to add
names/numbers.
Press OK.
To edit or delete an existing entry, select it and press Options, then
select Edit or Delete and press OK.
Call
1.
2.
3.
4.
voice mail
Press Menu, scroll to
and press OK.
Select Calls and press OK.
Select Voice mail and press OK.
Select Options and press OK.
31
English
5.
Select Call voice mail and press OK to call the voice mailbox.
Tip:
Press and hold shortcut button 1 to call your voice mail.
Speed dial
A, B, C and the numerical keys 0 and 2–9 can be used for
speed dialling.
Adding speed dial numbers
1. Press Menu, scroll to
and press OK.
2. Select Calls and press OK.
3. Select Speed dial and press OK.
4. Select A and press Add.
5. Select an entry from the phonebook and press OK.
6. Repeat to add speed dial entries for buttons B, C, 0, 2–9.
To change contact, select an existing entry and press Options, then
select Edit or Delete and press OK.
To speed dial an entry from standby, press and hold the corresponding
button.
You can edit the contact information for the dedicated speed dial
buttons A, B and C.
1.
2.
Press the corresponding button. Use
/
name or the number, then press Edit.
Press OK to confirm. Delete with Clear.
to highlight the
Top 10
Set the entry as one of the first 10 contacts listed in the
phonebook.
1.
2.
3.
4.
5.
Press Menu, scroll to
and press OK.
Select Calls and press OK.
Select Top 10 and press OK.
Select one of the empty entries and press Add.
Use
/
to scroll through the phonebook or quick search by
pressing the key corresponding to the first letter of the entry.
32
English
6.
Press OK to save the selected entry, or press Back to discard
changes.
To delete a Top 10 entry, select the entry in the Top 10 list and press
Options, then Delete.
Call time
During a call, the duration of the call is shown. You can check the
duration of your calls.
1.
2.
3.
4.
Press Menu, scroll to
and press OK.
Select Calls and press OK.
Select Call time and press OK.
Select one of the following options and press OK.
Last call
Outgoing
calls
Received
calls
Reset all
Show the elapsed time of the most recent call.
Show the elapsed time of all dialled calls.
Show the elapsed time of all received calls.
Press Yes to reset the timer, or No to discard changes.
Answer mode
Select Open to answer and press OK, select On and press OK to
answer incoming calls by opening the flip.
Select Any key and press OK, select On and press OK to be able to
).
answer incoming calls by pressing any button (exemption
Call setup
Depending on network support and subscription. Contact your service
provider for more information.
Caller ID
Display or hide your phone number on the recipients phone when
you call.
1.
2.
3.
Press Menu, scroll to
and press OK.
Select Calls and press OK.
Select Call setup and press OK.
33
English
4.
5.
Select Caller ID and press OK.
Select one of the following options and press OK.
Set by
network
Hide ID
Send ID
Use default setting by the network.
Never show your number.
Always show your number.
Call waiting
You can handle more than one call at a time. An alert tone will be
heard if there is an incoming call while talking. To put the current
call on hold and answer the incoming call, press Options, select
Answer and then OK.
1.
2.
3.
4.
5.
Press Menu, scroll to
and press OK.
Select Calls and press OK.
Select Call setup and press OK.
Select Call waiting and press OK.
Select one of the following options and press OK.
Activate
Deactivate
Query status
Enables call waiting.
Disables call waiting.
Displays if call waiting is active or not.
Call divert
You can divert calls to an answering service or to another phone
number. Set up which calls should be diverted. Select a condition
and press OK, then select Activate, Deactivate or Query status (see
Call waiting, p.34) for each.
1.
2.
3.
4.
5.
Press Menu, scroll to
and press OK.
Select Calls and press OK.
Select Call setup and press OK.
Select Call divert and press OK.
Select one of the following options and press OK.
Voice calls
Diverts all voice calls.
Unreachable Diverts incoming calls if the phone is turned off or out
of range.
34
English
No reply
If busy
Cancel
diverts
Diverts incoming calls if unanswered.
Diverts incoming calls if the line is busy.
Do not divert calls.
Call barring
Your phone can be restricted to disallow certain types of calls.
Note!
A password is needed to apply Call barring. Contact your service
provider to get the password.
1.
2.
3.
4.
5.
Press Menu, scroll to
and press OK.
Select Calls and press OK.
Select Call setup and press OK.
Select Call barring and press OK.
Select one of the following options and press OK.
Outgoing
calls
All calls
Internat.calls
Int. except
home
Incoming
calls
All calls
When
roaming
Cancel all
Press OK then select:
User can answer incoming calls but not dial out.
User can not call international numbers.
User can not call international numbers except to the
country associated with the SIM card.
Press OK then select:
User can dial out but not receive incoming calls.
User can not receive incoming calls while roaming
(operating in other networks).
Cancel all call barring (password needed).
Messages
1.
2.
3.
Press Menu, scroll to
and press OK.
Select Messages and press OK.
Select one of the following options and press OK.
Predictive text
Select On and press OK to enable Predictive text/eZiType , see
Entering text
, p. 8 .
™
35
English
Write speed
You can change the speed at which keypad characters repeat (before
the cursor moves onto the next character).
Select Fast, Normal or Slow and press OK.
SMS settings
Memory status
Displays the percentage of memory space used on the SIM card and
in the phone memory. Phone memory can store up to 200 messages.
Storage
1. Select SIM (default) to store messages on the SIM card, or Phone
to store messages in the phone memory.
2. Press OK.
Profile set
This number is needed to use the message function. The number to
your service centre is supplied by your service provider and is usually
set on the SIM card. If the service centre number is saved on the SIM
card it is shown. If not, you can enter the number yourself. Contact
your service provider for more information.
1.
2.
Press Edit and enter the service centre number. Press Clear to
delete.
Press Save to save the new number.
Cell information
You can receive messages on various topics from your service provider,
such as weather or traffic conditions in a particular region. For
available channels and relevant channel settings, contact your service
provider. Cell broadcast messages cannot be received when the device
is roaming.
Select Cell information and press OK for the following settings:
Function
on/off
Read
messages
To turn information On or Off.
Press OK to read the message.
36
English
Languages
Channel
settings
Select language On/Off and press Done.
Select from which channels you want to receive/subscribe
messages. Use the options Subscribe, Cancel
subscription, Add, Edit and Delete to define your
channels.
MMS settings
Memory status
Displays the percentage of memory space used in the phone memory.
Phone memory can store up to 100 messages.
MMS profile
These settings are needed to use the MMS function. The settings
for MMS is supplied by your service provider and can be sent to
you automatically.
1.
2.
3.
Select MMS profile and press OK.
Select your service provider and press Options.
Select Activate and press OK.
If your service provider is not in the list, do the following:
1.
2.
Select MMS profile and press OK.
Select Add and press OK for the following settings:
Enter the settings for your service provider. The correct settings
can be obtained from the service provider.
Account
name
APN
User name
Password
Homepage
Connection
type
Proxy
address
Proxy port
Add account name.
Add APN (Access Point Name).
Add user name.
Add password.
Add homepage.
Use the side buttons +/- to select connection type
HTTP or WAP.
Add proxy address.
Add proxy port.
37
English
User name
Password
3.
4.
5.
Add proxy user name.
Add proxy password.
Press OK and press Yes to save or No to exit without saving.
Select your new profile and press Options.
Select Activate and press OK.
You can also activate/modify a MMS profile by selecting one and press
Options to Activate/Edit/Delete the account.
Note!
Some service providers require you to send an MMS message before you
will be able to receive one. Send a MMS with text only to activate
the service. Some service providers require that you contact them
before enabling MMS for your account. Contact your service provider’
Customer Services. Press
during set up to exit without saving.
Reminder
The SMS reminder alerts you once if you haven't checked your text
message within 10 minutes from receipt. If notification envelope is
, no reminder will be heard.
removed by pressing
Select Reminder and press On/Off to enable/disable.
Vibration
The SMS vibration alert is several short vibrations that continues for
either Short (4 seconds) or Long (12 seconds).
Note!
If Alert type is set to Ring only the phone will not vibrate.
Delivery report
You can select if you want the phone to notify you when your SMS
has reached the receiver.
Select Delivery report and press OK. Select On or Off to enable/disable.
Press OK to save.
Note!
If you choose Delivery report=On, some operators will charge you for
that message.
38
English
Delete
Select Inbox to delete all messages in the Inbox. Press Yes confirm
or No to discard changes.
Select Outbox to delete all messages in the Outbox. Press Yes confirm
or No to discard changes.
Select Sent to delete all messages in Sent. Press Yes confirm or No
to discard changes.
Select Delete all to delete all messages at the same time. Press Yes
confirm or No to discard changes.
Camera
1.
2.
3.
Press Menu, scroll to
and press OK.
Select Camera and press OK.
Select one of the following options and press OK.
EV information
EV/Light sensitivity can be adjusted by pushing volume keys up &
down when in camera mode.
Image size
Select one of the following options Wallpaper (lowest quality), 1 MP
or 2 MP (highest quality).
Note!
With higher quality (more megapixels), less pictures can be stored in
memory.
Shutter sound
Select one of the following options Off, Low or High.
Assistance
Settings for the Assistance button function.
1.
2.
Press Menu, scroll to
and press OK.
Select Assistance and press OK for the following settings:
Activation
Select one of the following options and press OK.
39
English
On Normal
On (3)
Off
To activate, press and hold button for approximately 3
seconds, or press twice within 1 second.
To activate, press button 3 times within 1 second.
Assistance button disabled.
Number list
The list of numbers that will be called when theAssistance button
is pressed.
1.
2.
3.
Select Empty and press Add.
Select Phonebook to add a contact from the phonebook.
Alternatively, press Manual. See Phonebook, p.13 on how to add
names/numbers.
Press OK.
Repeat until you have 5 contacts (maximum).
To edit or delete an existing entry, select it and press Options, then
select Edit or Delete and press OK.
SMS
The message to be sent to the contacts in numbers list when the
Assistance button is pressed.
Activation
Select one of the following options and press OK.
On
Off
The phone sends a text message before dialling.
The phone dials without sending a message first.
Message
Press Edit and enter the message and then press OK to confirm.
Note!
You must write a message if you activate the SMS function.
Confirm with "0"
Select one of the following options and press OK.
40
English
Off
The phone will dial the first number on the list. If the call
is not answered within 25 seconds, the next number is
dialled. Dialling is repeated 3 times or until the call is
answered, or until
is pressed.
The function will work as above AND: If the receiver
doesn’t press 0 within 60 seconds the call will be
disconnected and the next number in the sequence will
be called. If the receiver presses 0 within 60 seconds,
the call is confirmed and no further call attempts will be
made (assistance sequence interrupted).
On
Signal type
Adjustment of the signal type for notification of the assistance
sequence.
Select one of the following options and press OK.
High
Low
Silent
Loud signals (default).
One low signal.
No sound indication, like a normal call.
Alarm info
Please read this important safety information before enabling the
assistance function:
Be careful about including numbers with automatic answering in the
call list, as the alarm sequence stops once the call is answered.
Note!
This information is not applicable if Confirm with "0" is set to On.
Bluetooth
®
IMPORTANT!
When you are not using Bluetooth connectivity, select Function on/off /
Off or Visibility / Off. Do not pair with an unknown device.
You can connect wirelessly to other Bluetooth compatible devices
such as headsets.
1.
Press Menu, scroll to
and press OK.
41
English
2.
Select Bluetooth and press OK for the following settings:
Function on/off
Select On/Off and press OK to enable/disable Bluetooth.
Visibility
Select On/Off to make your phone visible/invisible to other devices.
Note!
To prevent other devices from finding your device, select Off. Even if
you select Off, paired devices can still detect your device.
Device name
Enter the name your phone should appear as for other Bluetooth
devices and press OK.
Search device
Search for available Bluetooth audio devices. If Bluetooth is not
enabled you can enable it now by pressing Yes.
1.
2.
Select from the list of devices and press Bond to connect.
When connecting to another Bluetooth device you need a shared
password. Enter the password and press OK.
My device
Lists saved devices and enables you to add new devices. Select device
from the list and press Options.
Connect/Disconnect
Set default
Rename
Delete
Delete all
Connect/disconnect selected device. Select required
profile, usually a headset.
Select the connected device as default.
Change the name of the device.
Delete the device from the list.
Delete all devices from the list.
Audio path
Select one of the following options and press OK.
Phone
Forward BT
Incoming calls are answered with the phone.
Incoming calls are forwarded to Bluetooth device.
42
English
Security
1.
2.
Press Menu, scroll to
and press OK.
Select Security and press OK.
SIM lock
The SIM card is protected with a PIN code (Personal Identification
Number). The phone can be set to ask for the PIN code on startup.
Select one of the following options and press OK.
On
Off
Automatic
PIN code activated, you need to enter the PIN code every
time the phone is started.
PIN code deactivated. Warning, if SIM card is lost/stolen
it is unprotected.
You do not need to enter the PIN code when the phone
is started, the phone remembers it automatically. If SIM
card is moved to another phone (lost/stolen), the PIN
code needs to be entered to unlock.
Note!
You need to input the current PIN code to disable/enable SIM lock.
Phone lock
Select On/Off and press OK to enable/disable.
Note!
You need to input the current Phone code to disable/enable Phone lock.
The default Phone code is 1234.
Remote configuration
Allow persons that you trust, usually a family member or friend, to
send information to your Doro PhoneEasy 611. You can receive
phonebook contacts and contacts for speed dial keys, calendar tasks
and settings for the assistance button. When activated, you don’t have
to do anything, it’s the other person that sends information to you.
®
Select Remote config and press OK for the following settings:
Activation
Select On to activate remote configuration and press OK.
43
English
On
Off
Remote configuration enabled.
Remote configuration disabled.
Number list
You need to add the name and number of the people who are allowed
to send information from their phone to your Doro PhoneEasy 611.
®
1.
2.
3.
4.
5.
Select Number list and press OK.
Select Empty and press Add.
Select Phonebook to add a contact from the Phonebook.
Alternatively, press Manual.
Press
.
Enter the number and press OK.
Repeat until you have 5 contacts (maximum).
To edit or delete an existing entry, select it and press Options, then
select View, Edit or Delete and press OK.
Fixed dial (FDN)
You can limit calls to certain numbers saved on the SIM card. The list
of allowed numbers is protected by your PIN2-code.
Mode
Fixed
numbers
Select On/Off and press OK. Enter PIN2. Press OK to
confirm.
Press Add to enter the first allowed number. Alternatively,
select an entry and press Options for the following
settings: Add, Edit or Delete and press OK. Enter PIN2.
Press OK to confirm.
Note!
You can save parts of phone numbers. For example, if you save 01234,
allows calls to all numbers starting with 01234. It is possible to place
an SOS call by entering the main local emergency number followed by
even when fixed dial is activated. When fixed dial is activated you
are not allowed to view or manage any phone numbers saved on the SIM
card. You are not able to send any SMS either.
Passwords (change your passwords)
To change the PIN, PIN2 or the Phone code passwords:
44
English
1.
2.
3.
Enter the current code and confirm with OK.
Enter a new code and confirm with OK.
Enter the new code again and confirm with OK.
Reset settings
If you select Reset settings, the changes that you have made to the
phone settings will be reset to default settings. Input the phone
password and press OK to reset.
Reset all
If you select Reset all, your phones settings and content, such as
contacts, number lists and messages, will be deleted from the phone
memory (SIM memory is not affected). Input the phone password and
press OK to reset.
Note!
The default Phone code is 1234.
File manager
Manage the contents and properties of files. You can open, delete,
move, copy and rename files.
Supported image format: BMP/GIF/JPG/PNG. Photos taken with the
built in camera are saved as JPG.
Supported audio format: WAV/AMR/MIDI/MP3/AAC/AAC+. Recordings
made with the built in sound recorder are saved as AMR.
Supported video format: MP4/3GPP. Only playback is possible.
1.
2.
3.
4.
5.
Press Menu, scroll to
and press OK.
Select File manager, then press OK.
Select Phone/Memory card and press Open.
Select a folder, eg Photos and press Open.
Select a file and press Options for the following options:
Play (audio/video/music)
Play file. Use
when done.
to Play, use
to Stop playback. Press Back
45
English
View (photos/images)
Single view. Press Back when done.
Send
Select an option, then press OK:
Send by
MMS
Send by
Bluetooth
Send by MMS. Press OK to create a message, see
Creating and sending MMS, p.17.
Send to other Bluetooth devices, see Bluetooth®, p.41.
Details
View detailed information about the file, e.g. date, size,
copyright-protection.
Use
Select an option from the list, then press OK.
Wallpaper
Phonebook
picture
Save as display background. Press OK.
Send to a phonebook contact. Press OK.
Rename
Rename the file. Delete with Clear and press Done to confirm.
Delete
Press OK to delete selected file. Press Yes to confirm or No to return.
Delete all
Press OK to delete all files in selected folder. Press Yes to confirm
or No to return.
Sort by
Select if you want to sort your files by Name or Time.
Copy/Move
To copy or move a file to another folder:
1.
Select Copy/Move and press OK.
46
English
2.
3.
4.
5.
Select
Select
Select
Select
Phone/Memory card and press Options.
Open and press OK.
a folder, eg Photos and press Options.
Paste and press OK.
Additional functions
Alarm
1.
2.
3.
4.
5.
6.
7.
Press Menu, scroll to
and press OK.
Select On and press OK.
Enter the alarm time using the keypad, then press OK.
For a single occurrence, select Single and press OK.
For a repeated alarm, select Repeated and press OK. Scroll
through the list of weekdays and press On/Off to enable/disable
the alarm for each weekday, then press Done.
To edit an alarm, press Edit, then press OK.
To stop the alarm, press Off. The alarm is now deleted.
Note!
The alarm will work even when the phone is switched off. Do not press
Yes to power on if wireless phone use is prohibited or when it may
cause interference or danger.
When the alarm goes off a signal will sound. Press Stop to turn off the
alarm or press Snooze to repeat the alarm after 9 minutes.
Organizer
1.
2.
Press Menu, scroll to
and press OK.
Select one of the following options and press OK.
Calendar
View
Show tasks for the selected date.
Add task
1. Enter
2. Enter
3. Enter
4. Press
date for the task, then press
time for the task, then press
subject.
OK.
47
.
.
English
Jump to date
Enter the date and press OK.
View all
Select a task and press Options for the following options:
Edit
Delete
Delete all
Edit selected task.
Delete selected task.
Delete all tasks.
Note!
The calendar will work even when the phone is switched off. Do not
press Yes to power on if mobile phone use is prohibited or when it
may cause interference or danger.
1.
2.
3.
Daily reminder
Enter time for the task, then press
Enter subject.
Press OK to save the task.
.
Note!
Works even when the phone is switched off. Do not press Yes to power
on if mobile phone use is prohibited or when it may cause interference
or danger.
When the alarm goes off a signal will sound. Press Stop to turn off the
alarm or press Snooze to repeat the alarm after 9 minutes.
Calculator
The calculator can perform basic mathematical operations.
1.
2.
3.
4.
5.
Press Menu, scroll to
and press OK.
Enter the first number. Use # to enter decimal points.
Use the arrow buttons to select an operation (+, -, x, ÷) and
press OK.
Enter the next number and press OK.
Repeat steps 2–4 as necessary.
Select = and press OK to calculate the result.
48
English
FM radio
The FM radio has a frequency range from 87.5 to 108.0 MHz and
9 preset channels.
Turning the radio on
1.
Connect the headset to the headset socket
2.
Press Menu, scroll to
and press OK. The radio is turned on.
The tuned frequency is displayed. Select channel using
or
. Use the side keys +/- to adjust the volume.
Press
to return to standby mode. The radio will continue
to play.
3.
.
Save frequency
1.
2.
3.
4.
5.
6.
Press Menu, scroll to
and press OK.
Select channel using
or
.
When a station has been found, select Options.
Select Save frequency and press OK.
Enter a name for the new channel, see Entering text
Press Save.
, p. 8 .
Switch off
1.
2.
Press Menu, scroll to
and press OK.
Press Options, then press Switch off.
Tip:
Disconnecting the headset will also turn off the radio.
Channel list (editing the channel list)
1.
2.
3.
4.
5.
Press Menu, scroll to
and press OK.
Select Options.
Select Channel list and press OK.
Select the channel you wish to edit and press Options or Add.
Select one of the following options and press OK.
49
English
Play
Delete
Edit
Play the selected channel.
Delete the channel. Press Yes to confirm or No to return
to the channel list.
Edit the channel name, then press
to edit the
frequency, use # to enter the decimal point. Press Save.
Selecting channels
Press keys 1-9 to quick-select a preset channel while the radio
is playing.
Manual input (changing search mode)
1.
2.
3.
4.
Press Menu, scroll to
and press OK.
Select Options.
Select Manual input and press OK.
Select one of the following options and press OK.
Fine tune
Auto search
Manual tuning with
or
.
Automatic station search with
or
.
Auto save
Note!
This will overwrite all previously saved channels!
1.
2.
3.
Press Menu, scroll to
and press OK.
Select Options.
Select Auto save and press OK to automatically install available
radio stations in channels 1-9.
Games
1.
2.
Press Menu, scroll to
and press OK.
Select Tetris or Boxman then press OK for the following options:
Continue
Restart level
Start game
Game level
Press OK to continue game.
Press OK to restart game at the same level as before.
Press OK to start a new game.
Select difficulty level and press OK.
50
English
Best grades
Help
Shows your best results. Press Back to return or Reset to
reset the scores.
Shows instructions for the game. Press Back to return.
Settings
Sound effect Use side buttons +/- to select On or Off, then press OK.
Volume
Use the side buttons +/– to adjust the sound volume,
then press OK.
Instructions for the REMOTE USER
Sending remote control commands by text message.
Activation must be set to On and the remote user must be entered
in Number list on the Doro PhoneEasy 611.
®
Menu
Security
Remote config.
All contacts sent to Doro PhoneEasy 611 by remote configuration are
stored in the Phone (even if storage is set to SIM).
®
Mobile,
3 phone numbers for each contact
Home or
Office.
Note!
SMS format must be *#Command#, otherwise the SMS cannot be
identified as a remote control command.
Parameters are the content you want to send and you must use # sign
to separate two parameters. In tables P = Parameters.
Setting a contact in the phonebook
Command
P1
P2
P3
P4
phonebook
name
max.
length=20
mobile
max.
length=40
home
office
Example:
You want to send Jeff Jackson’s mobile number, home number and
his office number to Doro PhoneEasy 611. The mobile number is:
0700-393939. Home number: 046-280 50 11. Office number:
046-280 50 83.
®
51
English
*#phonebook#Jeff Jackson#0700393939#0462805011#046280
5083#
The number will be saved in the 611 Phonebook as:
Jeff Jackson
0700393939
0462805011
0462805083
Note!
Only use numerals for parameters 2, 3 and 4. If you use letters in these
parameters it will be stored as empty/blank in the Phonebook.
Contacts already saved in the Phonebook, will not be replaced. They
will be duplicated. This is to avoid unintentional removal of contacts
from the Phonebook.
Tip:
When storing international numbers, always use + before the country
code for best operation. Enter the phone number including the area
code.
Setting the assistance function
P3
P4
1–5
location in
Number list
Name
max.
length=20
number
max.
length=40
0/1
0=Off
1=On
Text
max.
length=70
Command
P1
P2
alert
a
activation
0/1/2
0=Off
1=On
Normal
2=On (3)
alert
n
number
alert
m
message
52
English
alert
c
confirm with
“0”
0/1
0=Off
1=On
alert
s
signal type
0/1/2
0=High
1=Low
2=Silent
Example:
You want to activate the assistance function.
*#alert#a#1#
You want Jeff Jackson to be stored in Number list in position one (1)
with phone number: 0700-393939.
*#alert#n#1#Jeff Jackson#0700393939#
You want the SMS message to be sent out when the assistance button
is pressed. Example of content in text message: This is an assistance
message. Please take appropriate actions.
*#alert#m#1#This is an assistance message. Please take appropriate
actions.#
You want to turn on the function Confirm with "0".
*#alert#c#1#
You want to set the Signal type to low.
*#alert#s#1#
Tip:
Remember to write down the positions you send. This way it is easier
for you to send changes later.
53
English
Setting the one touch memories
Command
P1
P2
P3
memorykey
a
A key
Name
max length =
20
number
max length = 40
memorykey
b
B key
Name
max length =
20
number
max length = 40
memorykey
c
C key
Name
max length =
20
number
max length = 40
Example:
You want to set Jeff Jackson’s mobile number in memory key A in
Doro PhoneEasy 611.
®
Martha Thomson in memory key B and Steve Lewis in memory key C.
*#memorykey#a#Jeff Jackson#0700393939#
*#memorykey#b#Martha Thomson#0768991014#
*#memorykey#c#Steve Lewis#0709441819#
Add task to calendar
Command
P1
P2
P3
task
yyyymmdd
Date
hhmm
Time
note
description of task.
max. length = 35
Example 1:
You want to send a new calendar task to Doro PhoneEasy 611. It is
for a dentist appointment on December 1, 2010 at 10:30.
®
*#task#20101201#1030#dentist appointment#
54
English
Troubleshooting
Phone cannot be switched on
Battery charge low
Battery incorrectly
installed
Connect the power adapter and charge the
battery for 3 hours. Full battery capacity is
reached after the battery has been charged
3–4 times.
Check the installation of the battery.
Failure to charge the battery
Battery or charger
Check the battery and charger.
damaged
Battery should only be Improve the charging environment.
charged in temperatures
between 0 °C and 40 °C
Check the charger connections.
Charger incorrectly
connected to phone or
power socket
Standby time decreases
Battery charge capacity
too low
Too far from base
station, phone is
constantly searching
for signal
Install a new battery.
Searching the network consumes battery
power. Find a place with a stronger signal, or
temporarily turn off the phone.
Failure to place or receive calls
Call barring activated
Deactivate call barring. If this does not solve
the problem, contact your service provider.
PIN code not accepted
Wrong PIN code entered Enter the PUK code to change the PIN code,
too many times
or contact your service provider.
55
English
SIM card error
SIM card damaged
Check the condition of the SIM card. If it is
damaged, contact your service provider.
Check the installation of the SIM card. Remove
the card and reinstall it.
Wipe the contact surfaces of the SIM card with
a clean cloth.
SIM card incorrectly
installed
SIM card dirty or damp
Failure to connect to network
SIM card invalid
No coverage of GSM
service
Contact your service provider.
Contact your service provider.
Weak signal
Too far from base station Try again from another location.
Network congestion
Try calling at a later time.
Echo or noise
Regional problem from
bad network relay
Hang up and redial. This may switch to
another network relay.
Failure to add a contact
Phonebook memory full Delete contacts to free up memory.
Failure to set a function
Function not supported Contact your service provider.
or subscribed from
network
Safety instructions
CAUTION
The unit and the accessories can contain small parts. Keep all of the
equipment out of the reach of small children.
The mains adapter is the disconnect device between the product and
mains power. The mains socket outlet must be close to the equipment
and easily accessible.
56
English
Network services and costs
Your device is approved for use on the networks. To use the device, you need a
subscription with a service provider.
Using network services may result in traffic costs. Some product features require
support from the network, and you may need to subscribe to them.
Operating environment
Follow the rules and laws that apply wherever you are, and always turn off the unit
whenever its use is prohibited or can cause interference or hazards. Only use the
unit in its normal user position.
This unit complies with guidelines for radiation when it is used either in a normal
position against your ear, or when it is at least 1.5 cm from your body. If the unit
is carried close to your body in a case, belt holder or other holder, these holders
should not contain any metal, and the product should be placed at the distance
from your body specified above. Make sure that the distance instructions above are
followed until the transfer is complete.
Parts of the unit are magnetic. The unit can attract metal objects. Do not keep
credit cards or other magnetic media near the unit. There is a risk that information
stored on them can be erased.
Medical units
The use of equipment that transmits radio signals, for example, mobile phones, can
interfere with insufficiently protected medical equipment. Consult a doctor or the
manufacturer of the equipment to determine if it has adequate protection against
external radio signals, or if you have any questions. If notices have been put up at
health care facilities instructing you to turn off the unit while you are there, you
should comply. Hospitals and other health care facilities sometimes use equipment
that can be sensitive to external radio signals.
Pacemakers
The Health Industry Manufacturers Association recommends that a minimum
separation of 15 cm be maintained between a handheld wireless phone and a
pacemaker to avoid potential interference with the pacemaker. Persons with
pacemakers:
•
•
•
Should always keep the phone more than 15 cm from their pacemaker when
the phone is turned on.
Should not carry the phone in a breast pocket.
Should use the ear opposite the pacemaker to minimize the potential for
interference.
If you have any reason to suspect that interference is taking place, turn the phone
off immediately.
57
English
Areas with explosion risk
Always turn off the unit when you are in an area where there is a risk of explosion.
Follow all signs and instructions. There is a risk of explosion in places that include
areas where you are normally requested to turn off your car engine. In these areas,
sparks can cause explosion or fire which can lead to personal injury or even death.
Turn off the unit at filling stations, and any other place that has fuel pumps and
auto repair facilities.
Follow the restrictions that apply to the use of radio equipment near places where
fuel is stored and sold, chemical factories and places where blasting is in progress.
Areas with risk for explosion are often – but not always – clearly marked. This also
applies to below decks on ships; the transport or storage of chemicals; vehicles that
use liquid fuel (such as propane or butane); areas where the air contains chemicals
or particles, such as grain, dust or metal powder.
Li-ion battery
This product contains a Li-ion battery. There is a risk of fire and burns if the battery
pack is handled improperly.
WARNING
Danger of explosion if battery is incorrectly replaced. To reduce risk
of fire or burns, do not disassemble, crush, puncture, short external
contacts, expose to temperature above 60° C (140° F), or dispose of
in fire or water. Recycle or dispose of used batteries according to the
local regulations or reference guide supplied with your product.
Protect your hearing
This device has been tested to comply with the Sound Pressure Level requirement
laid down in the applicable EN 50332-1 and/or EN 50332-2 standards.
58
English
WARNING
Excessive exposure to loud sounds can cause hearing damage.
Exposure to loud sounds while driving may distract your
attention and cause an accident. Listen to a headset at a
moderate level, and do not hold the device near your ear when
the loudspeaker is in use.
Note!
For France, mobile headphones or earphones for this device have been
tested to comply with the Sound Pressure requirement laid done in
the applicable NF EN 50332-1:2000 and/or NF EN 50332-2:2003
standards as required by French Article L. 5232-1.
A pleine puissance, l’écoute prolongée du baladeur peut endommager
l’oreille de l’utilisateur.
Emergency calls
IMPORTANT!
Mobile phones use radio signals, the mobile phone network, the
terrestrial network and user-programmed functions. This means that
connection cannot be guaranteed in all circumstances. Therefore, never
rely only on a mobile phone for very important calls such as medical
emergencies.
Vehicles
Radio signals can affect electronic systems in motor vehicles (for example, electronic
fuel injection, ABS brakes, automatic cruise control, air bag systems) that have been
incorrectly installed or are inadequately protected. Contact the manufacturer or its
representative for more information about your vehicle or any additional equipment.
Do not keep or transport flammable liquids, gases or explosives together with the
unit or its accessories. For vehicles equipped with air bags: Remember that air
bags fill with air with considerable force.
Do not place objects, including fixed or portable radio equipment in the area above
the airbag or the area where it might expand. Serious injuries may be caused if the
mobile phone equipment is incorrectly installed and the airbag fills with air.
It is prohibited to use the unit in flight. Turn off the unit before you board a plane.
Using wireless telecom units inside a plane can pose risks to air safety and interfere
with telecommunications. It may also be illegal.
59
English
Care and maintenance
Your unit is a technically advanced product and should be treated with the greatest
care. Negligence may void the warranty.
•
•
•
•
•
•
•
Protect the unit from moisture. Rain/snowfall, moisture and all types of
liquid can contain substances that corrode the electronic circuits. If the unit
gets wet, you should remove the battery and allow the unit to dry completely
before you replace it.
Do not use or keep the unit in dusty, dirty environments. The unit’s moving
parts and electronic components can be damaged.
Do not keep the unit in warm places. High temperatures can reduce the lifespan
for electronic equipment, damage batteries and distort or melt certain plastics.
Do not keep the unit in cold places. When the unit warms up to normal
temperature, condensation can form on the inside which can damage the
electronic circuits.
Do not try to open the unit in any other way than that which is indicated here.
Do not drop the unit. Do not knock or shake it either. If it is treated roughly the
circuits and precision mechanics can be broken.
Do not use strong chemicals to clean the unit.
The advice applies to the unit, battery, mains adapter and other accessories. If the
phone is not working as it should, please contact the place of purchase for service.
Don’t forget the receipt or a copy of the invoice.
Warranty
This product is guaranteed for a period of 12 months from the date of purchase.
In the unlikely event of a fault occurring during this period, please contact the
place of purchase. Proof of purchase is required for any service or support needed
during the guarantee period.
This guarantee will not apply to a fault caused by an accident or a similar incident
or damage, liquid ingress, negligence, abnormal usage, non-maintenance or any
other circumstances on the user’s part. Furthermore, this guarantee will not apply to
any fault caused by a thunderstorm or any other voltage fluctuations. As a matter of
precaution, we recommend disconnecting the charger during a thunderstorm.
Batteries are consumables and are not included in any guarantee.
This guarantee does not apply if batteries other than DORO original batteries are
used.
Specifications
Network:
Dimensions:
101 mm x 52 mm x 20 mm
60
English
Weight:
103 g (including battery)
Battery:
3.7 V / 800 mAh Li-ion battery
Bluetooth® is a registered trademark of Bluetooth SIG, inc.
eZiType™ is a trademark of Zi Corporation.
vCard is a trademark of the Internet Mail Consortium.
Hearing aid
This device should work with most hearing aid equipment in the market. However,
full compatibility with all equipment can not be promised.
Specific Absorption Rate (SAR)
This device meets applicable international safety requirements for exposure to radio
waves. Doro PhoneEasy® 611 measures 0.733 W/kg measured over 10 g tissue.
The maximum limit according to WHO is 2.0 W/kg measured over 10 g tissue.
Declaration of Conformity
Doro hereby declares that Doro PhoneEasy® 611 conforms to the essential
requirements and other relevant regulations contained in the Directives 1999/5/EC
(R&TTE) and 2002/95/EC (RoHS). A copy of the Declaration of Conformity is
available at www.doro.com/dofc
61
PhoneEasy 611 (3031)
LAST PAGE
English
Version 1.1
© 2012 Doro AB. All rights reserved.
www.doro.com
0700
REV 5932 — STR 20120822