Samsung I7110
user manual
Instructional icons
using this
manual
This user manual has been specially designed to
guide you through the functions and features of
your device. To get started quickly, refer to the
Quick Start Guide.
Before you start, familiarise yourself with the
icons you will see in this manual:
X
→
[ ]
ii
Warning—situations that could cause
injury to yourself or others
Caution—situations that could cause
damage to your device or other
equipment
Note—notes, usage tips, or additional
information
Refer to—pages with related
information; for example: X p. 12
(represents "see page 12")
Followed by—the order of options or
menus you must select to perform a
step; for example: Press [ ] → Media
→ Music player (represents [ ],
followed by Media, followed by Music
player)
Square brackets—device keys; for
example: [
] (represents the End/
Power key).
< >
Angled brackets—softkeys that control
different functions at each screen; for
example: <OK> (represents the OK
softkey).
Rights to all technologies and products that
comprise this device are the property of their
respective owners:
• This product includes software
licensed from Symbian Ltd.
© 1998-2008. Symbian and
Symbian OS are trademarks of
Symbian Ltd.
• Java™ is a trademark of Sun Microsystems,
Inc.
• Bluetooth® is a registered trademark of the
Bluetooth SIG, Inc. worldwide— Bluetooth
QD ID: B014559.
• Windows Media Player® is a registered
trademark of Microsoft Corporation.
ABOUT DIVX VIDEO
DivX® is a digital video format created by DivX,
Inc. This is an official DivX Certified device that
plays DivX video. Plays DivX® video up to
320x240. May play DivX® video up to
640x480.
ABOUT DIVX VIDEO-ON-DEMAND
This DivX® Certified device must be registered
with DivX in order to play DivX Video-onDemand (VOD) content. First generate the DivX
VOD registration code for your device and
submit it during the registration process.
[Important: DivX VOD content is protected by a
DivX DRM (Digital Rights Management) system
that restricts playback to registered DivX
Certified devices. If you try to play DivX VOD
content not authorised for your device, the
message "Authorization Error" will be displayed
and your content will not play.] Learn more at
www.divx.com/vod.
iii
using this manual
Copyrights and trademarks
• DivX® is a registered
trademark of DivX, Inc., and
is used under licence.
safety and usage information
contents
2
Safety warnings .......................................... 2
Safety precautions ...................................... 4
Important usage information ....................... 7
communication
10
Messages ................................................. 10
Log ........................................................... 20
media
23
Gallery ...................................................... 23
ShoZu ...................................................... 24
Video Editor .............................................. 25
Viewer & Editor ......................................... 29
Radio ........................................................ 32
RealPlayer® ............................................. 33
Recorder .................................................. 33
PC Studio ................................................. 34
DLNA ....................................................... 34
personal productivity
iv
35
Contacts .................................................. 35
Calendar ................................................... 38
Quickoffice® ............................................ 39
Adobe® Reader® .................................... 39
Notes ....................................................... 40
web
41
connectivity
48
Use the Bluetooth wireless feature ............ 48
Connect via USB ...................................... 51
Synchronise your device ........................... 52
additional programs
managers
61
File manager ............................................. 61
Zip ............................................................ 63
Application manager ................................. 64
Device manager ....................................... 65
Licence manager ...................................... 65
Connection manager ................................ 66
settings
68
General settings ....................................... 68
Phone settings ......................................... 69
Connection settings .................................. 70
Applications settings ................................. 71
troubleshooting
a
index
e
54
Calculator ................................................. 54
Clock ........................................................ 54
Converter ................................................. 56
GPS data .................................................. 57
Navigation ................................................ 59
Landmarks ............................................... 59
Smart reader ............................................ 60
v
contents
Browse a web page .................................. 42
Add a bookmark ....................................... 42
Use a bookmark ....................................... 43
Save a web page and view it offline .......... 43
Download files from the web ..................... 44
Download ................................................. 44
GyPSii ...................................................... 45
fring™ ...................................................... 46
Google ..................................................... 46
Yahoo! Go ................................................ 47
CNN ......................................................... 47
safety and
usage
information
Comply with the following precautions to avoid
dangerous or illegal situations and ensure peak
performance of your device.
2
Safety warnings
Keep your device away from small
children and pets
Keep your device and all accessories out of the
reach of small children or animals. Small parts
may cause choking or serious injury if
swallowed.
Protect your hearing
Listening to a headset at high
volumes can damage your hearing.
Use only the minimum volume setting
necessary to hear your conversation
or music.
Install mobile devices and
equipment with caution
Handle and dispose of batteries and
chargers with care
• Use only Samsung-approved batteries and
chargers specifically designed for your
device. Incompatible batteries and chargers
can cause serious injuries or damage to your
device.
• Never dispose of batteries or devices in a
fire. Follow all local regulations when
disposing used batteries or devices.
Avoid interference with pacemakers
Maintain a minimum of 15 cm (6 inches)
between mobile devices and pacemakers to
avoid potential interference, as recommended
by manufacturers and the independent
research group, Wireless Technology
Research. If you have any reason to suspect
that your device is interfering with a pacemaker
or other medical equipment, turn off the device
immediately and contact the manufacturer of
the pacemaker or medical equipment for
guidance.
3
safety and usage information
Ensure that any mobile devices or related
equipment installed in your vehicle are securely
mounted. Avoid placing your device and
accessories near or in an air bag deployment
area. Improperly installed wireless equipment
can cause serious injury when air bags inflate
rapidly.
• Never place batteries or phones on or in
heating devices, such as microwave ovens,
stoves, or radiators. Batteries may explode
when overheated.
Turn off the device in potentially
explosive environments
safety and usage information
Do not use your device at refuelling points
(service stations) or near fuels or chemicals.
Turn off your device whenever directed by
warning signs or instructions. Your device could
cause explosions or fire in and around fuel or
chemical storage and transfer areas or blasting
areas. Do not store or carry flammable liquids,
gases, or explosive materials in the same
compartment as the device, its parts, or
accessories.
Reduce the risk of repetitive motion
injuries
When sending text messages or playing games
on your device, hold the device with a relaxed
grip, press the keys lightly, use special features
that reduce the number of keys you have to
press (such as templates and predictive text),
and take frequent breaks.
4
Safety precautions
Drive safely at all times
Avoid using your device while driving and obey
all regulations that restrict the use of mobile
devices while driving. Use hands-free
accessories to increase your safety when
possible.
Follow all safety warnings and
regulations
Comply with any regulations that restrict the use
of a mobile device in a certain area.
Use only Samsung-approved
accessories
Using incompatible accessories may damage
your device or cause injury.
Protect batteries and chargers from
damage
Your device can interfere with medical
equipment in hospitals or health care facilities.
Follow all regulations, posted warnings, and
directions from medical personnel.
• Avoid exposing batteries to very cold or very
hot temperatures (below 0° C/32° F or
above 45° C/113° F). Extreme temperatures
can reduce the charging capacity and life of
your batteries.
• Prevent batteries from contacting metal
objects, as this can create a connection
between the + and - terminals of your
batteries and lead to temporary or
permanent battery damage.
• Never use a damaged charger or battery.
• Risk of explosion if a battery or device is
replaced by an incorrect type. Dispose of
used batteries or devices according to the
instructions.
Turn off the device or disable the
wireless functions when in an
aircraft
Your device can cause interference with aircraft
equipment. Follow all airline regulations and turn
off your device or switch to a mode that
disables the wireless functions when directed
by the airline personnel.
5
safety and usage information
Turn off the device near medical
equipment
Handle your device carefully and
sensibly
safety and usage information
• Do not allow your device to get wet—liquids
can cause serious damage. Do not handle
your device with wet hands. Water damage
to your device can void your manufacturer’s
warranty.
• Avoid using or storing your device in dusty,
dirty areas to prevent damage to moving
parts.
• Your device is made of complex
electronics—protect it from impacts and
rough handling to avoid serious damage.
• Do not paint your device, as paint can clog
moving parts and prevent proper operation.
• Avoid using the device’s camera flash or light
close to the eyes of children or animals.
6
• Your device and memory cards may be
damaged by exposure to magnetic fields.
Do not use carrying cases or accessories
with magnetic closures or allow your device
to come in contact with magnetic fields for
extended periods of time.
Avoid interference with other
electronic equipment
Your device emits radio frequency (RF) signals
that may interfere with unshielded or improperly
shielded electronic equipment, such as
pacemakers, hearing aids, and medical
equipment in homes or vehicles. Consult the
manufacturers of your electronic equipment to
solve any interference problems you
experience.
Important usage information
Use your device in the normal
position
Allow only qualified personnel to
service your device
Allowing unqualified personnel to service your
device may result in damage to your device and
will void your warranty.
Ensure maximum battery and
charger life
• Avoid charging batteries for more than a
week, as overcharging may shorten battery
life.
• Over time, unused batteries will discharge
and must be recharged before use.
Handle SIM cards and memory
cards with care
• Do not remove a card while the device is
transferring or accessing information, as this
could result in loss of data and/or damage to
the card or device.
• Protect cards from strong shocks, static
electricity, and electrical noise from other
equipment.
• Frequent writing and erasing will shorten the
life span of memory cards.
• Do not touch gold-coloured contacts or
terminals with your fingers or metal objects. If
dirty, wipe the card with a soft cloth.
7
safety and usage information
Avoid contact with your device’s internal
antenna.
• Disconnect chargers from power sources
when not in use.
• Use batteries only for their intended
purpose.
Ensure access to emergency
services
safety and usage information
Emergency calls from your device may not be
possible in some areas or circumstances.
Before travelling in remote or undeveloped
areas, plan an alternate method of contacting
emergency services personnel.
Specific Absorption Rate (SAR)
certification information
Your device conforms to European Union (EU)
standards that limit human exposure to radio
frequency (RF) energy emitted by radio and
telecommunications equipment. These
standards prevent the sale of mobile devices
that exceed a maximum exposure level (known
as the Specific Absorption Rate, or SAR) of 2.0
watts per kilogram of body tissue.
8
During testing, the maximum SAR recorded for
this model was 0.825 watts per kilogram. In
normal use, the actual SAR is likely to be much
lower, as the device has been designed to emit
only the RF energy necessary to transmit a
signal to the nearest base station. By
automatically emitting lower levels when
possible, your device reduces your overall
exposure to RF energy.
The Declaration of Conformity at the back of
this manual demonstrates your device’s
compliance with the European Radio & Terminal
Telecommunications Equipment (R&TTE)
directive. For more information about the SAR
and related EU standards, visit the Samsung
mobile website.
Correct disposal of this product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union
and other European countries with
separate collection systems)
Business users should contact their supplier
and check the terms and conditions of the
purchase contract. This product should not be
mixed with other commercial wastes for
disposal.
safety and usage information
This marking shown on the product
or its literature, indicates that it should
not be disposed with other household wastes
at the end of its working life. To prevent
possible harm to the environment or human
health from uncontrolled waste disposal, please
separate this from other types of wastes and
recycle it responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the
retailer where they purchased this product, or
their local government office, for details of
where and how they can take this item for
environmentally safe recycling.
9
Messages
communication
Your device allows you to send and receive many
types of calls and messages over cellular networks
and the internet.
Learn to use messaging functions. For
instructions on entering text, see the Quick Start
Guide.
Message folders
When you open Messaging, you will see the
New message function and a list of folders:
• Inbox: received messaging, except email
and cell broadcast messages
• My folders: message templates and saved
messages
• New mailbox: received email messages;
when you create a mailbox, the name you
specify will appear here
• Drafts: messages you have not yet sent
• Sent: recent sent messages
• Outbox: temporary storage for messages
waiting to be sent
10
• Reports: delivery reports of text and
multimedia messages; you must request a
delivery report in the message options
before sending
Inbox icons
In the Inbox, you may see the following icons
next to your messages:
Icon
Description
Unread text message
Multimedia message notification
Unread multimedia message
Description
Unread smart message
Unread service message
Data received via a Bluetooth
connection
communication
• Messages sent via the Bluetooth wireless
feature are not saved in the Drafts or Sent
folder.
• You may not receive a delivery report for a
multimedia message if you send it to an
email address.
Icon
Unknown message type
Outbox status
When you are outside your service area or have
no connection to the network or email server,
your messages will remain in the Outbox folder
until you re-establish a connection. The Outbox
status explains why a message is being held in
the Outbox folder:
• Sending: the device is connecting and the
message will be sent immediately
• Waiting: the message is in cue behind
another message and will be sent as soon
as possible
11
communication
• Resend at (time): the message has failed to
send and will be sent at the specified time
• Deferred: the message has been
scheduled to send at a later time
• Failed: the device has attempted to send
the message multiple times, but has failed
Retrieve messages from a SIM card
If you have text messages stored on a SIM
card, you must copy them to the device before
you can view them.
1. In Standby mode, press [ ] → Messaging
→ <Options> → SIM messages.
2. Press <Options> → Mark/Unmark →
Mark (to select one) or Mark all (to select
all).
3. Press <Options> → Copy → Inbox or a
folder.
You can now view the messages from the
folder on your device.
12
Multimedia messages
Before you can send multimedia messages,
you must define an access point.
Set an access point
Your service provider may supply access point
settings via a smart message. To automatically
set an access point using a smart message,
see "Save smart message data or settings to
your device." X p. 19
To manually set an access point,
1. In Standby mode, press [ ] → Settings →
Settings → Connection → Destinations
→ Multimedia msg.
2. Scroll down and press the Confirm key to
select an existing access point or press
<Options> → New access point.
3. Set access point options according to the
instructions provided by your service
provider.
Send a multimedia message
You can only add images with a resolution of
176 x 144 or lower.
Edit a multimedia message
You can edit your multimedia message before
sending it:
• To add fields to the message header, press
<Options> → Message header fields → a
field type
• To change the message layout, press
<Options> → Place text last or Place text
first
• To remove an item, press <Options> →
Remove → an item
You can add images, sounds, or videos to
slides; however, you can only add one type
of media type per slide.
View a multimedia message
1. In Standby mode, press [ ] → Messaging
→ Inbox.
2. Scroll to a message and press the Confirm
key to select the message.
Listen to voice mail
If your voice mail number is preset by your
service provider, you can press and hold [1] to
access your voice mail.
13
communication
1. In Standby mode, press [ ] → Messaging
→ New message → Message.
2. Enter a phone number or press the Confirm
key to select a contact.
3. Scroll down and enter text.
4. To insert an existing multimedia object,
press <Options> → Insert content → an
object type → From Gallery. To create and
insert a new multimedia object, press
<Options> → Insert content → an object
type → New.
5. Press <Options> → Send to send the
message.
If the voice mail number is not preset or if you
need to change the voice mail number,
communication
1. In Standby mode, press [ ] → Tools →
Call mailbox → <Options> → Change
number.
2. Enter the voice mail number provided by
your service provider and press <OK>.
You can now access your voice mail from
Standby mode by pressing and holding [1].
Email messages
Before you send or receive email messages,
you must create a mailbox.
Create a mailbox
1. In Standby mode, press [ ] → Messaging
→ <Options> → Settings → E-mail or
Sync e-mail → Mailboxes.
2. Press <Options> → New mailbox.
14
3. Press <Start> to start the mailbox setup
wizard and follow the on-screen
instructions.
The new mailbox will automatically appear in
Messaging. To change the current mailbox,
return to email settings and switch the "Mailbox
in use" to another mailbox.
If you use the POP3 protocol, the mailbox will
not update automatically when you are
online. You must disconnect and then
reconnect to view new messages.
Send an email message
1. In Standby mode, press [ ] → Messaging
→ New message → E-mail.
2. Enter an email address or press the
Confirm key to select a contact.
3. Scroll down and enter a subject.
4. Scroll down and enter text.
View an email message
When you open a mailbox, you can view
previously retrieved emails offline or connect to
the email server to view new messages. After
you retrieve email messages, you can view
them offline.
To view new messages online,
1. In Standby mode, press [ ] → Messaging
→ your mailbox.
2. Press <Options> → Connect.
3. Press <Options> → Retrieve e-mail →
New.
To view new messages offline,
1. Repeat steps 1-3 above.
2. Press <Options> → Disconnect.
View or save email attachments
Email attachments ( ) may contain viruses
that can damage your device. To protect
your device, open attachments only if you
trust the sender.
To view an attachment,
1. From an open email message, press
<Options> → Attachments.
2. Scroll to the attachment and press the
Confirm key.
The attachment opens with the
corresponding application.
To save an attachment,
1. From an open email message, press
<Options> → Attachments.
15
communication
5. Press <Options> → Insert → an object
type (optional).
6. Press <Options> → Send.
If you are offline or outside your service area,
the message will be held in the Outbox folder
until you are online and in your service area.
2. Scroll to the attachment and press
<Options> → Save.
Delete an email message
communication
You can delete email messages from your
device only or from both your device and the
mail server.
2. Scroll to an email and press <Options> →
Delete → Phone and server.
If you are offline, messages will be deleted
from the server the next time you connect. If
you are using the POP3 protocol, deleted
messages are removed when you close the
mailbox connection.
To delete a message from your device only,
1. In Standby mode, press [ ] → Messaging
→ your mailbox.
2. Scroll to an email and press <Options> →
Delete → Phone only.
The email header will remain in your mailbox
until you delete the message from the mail
server.
To delete a message from both your device and
the mail server,
1. In Standby mode, press [ ] → Messaging
→ your mailbox.
16
Instant messages
You can send and receive instant messages
(IM) if your service provider supports this
feature.
Log in to the IM server
1. In Standby mode, press [ ] →
Connectivity → IM.
2. If the device does not attempt to log in
automatically, press <Options> → Log in.
3. Select an account.
4. Enter your user ID and password, and then
press <OK>.
5. To log out, press <Options> → Log out.
Start a conversation
Accept an invitation
When you receive an IM invitation, press
<Show> to accept the invitation. If you have
multiple invitations at once, press <Show>,
scroll to an invitation, and press <OK>.
You can save IM contact information by
pressing <Options> → Add to IM contacts
during a conversation. You can also add
information in IM Contacts by pressing
<Options> → New IM contact.
When you view your IM contacts, you may see
the following icons:
Icon
Description
the contact is online
the contact is offline
the contact is blocked
If you see no icon next to a contact’s name, the
contact is unknown.
17
communication
1. In Standby mode, press [ ] →
Connectivity → IM → Conversations.
2. Press <Options> → New conversation →
Enter user ID or Select from contacts.
3. Enter a user ID or select a contact from your
contact list.
4. To end the conversation, press <Options>
→ End conversation.
Add IM contacts
Audio messages
You can send audio messages with voice
memos or sound clips. To record a voice
memo or sound clip, see "Recorder." X p. 33
communication
Send an audio message
1. In Standby mode, press [ ] → Messaging
→ New message → Audio message.
2. Press <Options> → Add recipient.
3. Scroll to a recipient and press the Confirm
key → <OK> → a number (if necessary).
4. Press <Options> → Insert sound clip →
From Gallery or New sound clip → a
sound clip.
5. Press <Options> → Send.
Cell broadcast messages
If your service provider supports this function,
you can subscribe to cell broadcasts that
provide automatic notifications or news
18
updates. To learn about available cell
broadcasts, contact your service provider.
Add a cell broadcast topic
1. In Standby mode, press [ ] → Messaging
→ <Options> → Cell broadcast.
2. Press <Options> → Topic → Add
manually.
3. Enter the topic name and number, and then
press <OK>.
Subscribe to a cell broadcast
1. In Standby mode, press [ ] → Messaging
→ <Options> → Cell broadcast.
2. Scroll to a topic and press <Options> →
Subscribe.
Your device will now receive new
messages automatically.
3. To cancel a subscription, press <Options>
→ Cancel subscription.
Some connection settings may block cell
broadcasts. Contact your service provider
for the appropriate connection settings.
1. In Standby mode, press [ ] → Messaging
→ <Options> → Cell broadcast.
2. Scroll to a topic folder and press the
Confirm key.
3. Scroll to a topic and press the Confirm key.
Set automatic notification of new cell
broadcast messages
1. In Standby mode, press [ ] → Messaging
→ <Options> → Cell broadcast.
2. Scroll to a topic and press <Options> →
Hotmark.
3. To stop automatic notifications, press
<Options> → Remove hotmark.
Your device can receive many kinds of smart
messages, including business cards,
ringtones, calendar events, browser
bookmarks, and settings. Your service provider
may send smart messages that you can use to
load settings into your device.
Save smart message data or settings to
your device
1. In Standby mode, press [ ] → Messaging
→ Inbox.
2. Scroll to a message and press the Confirm
key.
3. Press <Options> and save the data or
settings according to the smart message
type.
You may also receive an email notification,
which tells you how many new emails are in
your remote mailbox.
19
communication
View a cell broadcast topic
Smart messages
communication
Service messages
View recent call logs
You may receive service messages from your
service provider that are deleted automatically
when they expire. You can view service
messages from the Inbox (you may have to
download the message from the service
provider). Contact your service provider for
more information about service messages.
To view recently missed calls, received calls, or
dialled numbers,
1. In Standby mode, press [ ] → Tools →
Log → Recent calls.
2. Scroll to a call type and press the Confirm
key.
To call a number from a call log, scroll to the
number and press [
].
Log
Learn to view log information about calls,
packet data, and other communication events.
Recent calls
You can view and erase logs of recently missed
calls, received calls, or dialled numbers.
20
Erase recent call logs
You can erase all recent call logs at once, erase
a single call log, or delete a single number from
a log.
To erase all recent call logs,
1. In Standby mode, press [ ] → Tools →
Log → Recent calls.
2. Press <Options> → Clear recent calls.
3. Press <Yes> to confirm.
To erase a single call log,
Packet data
1. In Standby mode, press [ ] → Tools →
Log → Recent calls → a call type.
2. Press <Options> → Clear list.
3. Press <Yes> to confirm.
To view the amount of sent or received packet
data, in Standby mode, press [ ] → Tools →
Log → Packet data.
Call duration
To view the durations of your last call, dialled
number, received call, or all calls, in Standby
mode, press [ ] → Tools → Log →
Call duration.
Communication log
You can view communication details and filter
logs with the communication log.
View the communication log
1. In Standby mode, press [ ] → Tools →
Log.
2. Scroll right to switch to the communication
log.
Some events, such as a text message split
into multiple parts, will appear as one
communication event.
21
communication
To erase a single number from a log,
1. In Standby mode, press [ ] → Tools →
Log → Recent calls → a call type.
2. Scroll to a number and press [C], or press
<Options> → Delete.
3. Press <Yes> to confirm.
communication
Filter log events
Log duration
1. In Standby mode, press [ ] → Tools →
Log.
2. Scroll right to switch to the communication
log.
3. Press <Options> → Filter.
4. Scroll to a filter type and press the Confirm
key.
You can change the length of time that
communication events are stored in the logs.
After that time, events are automatically erased
to free up memory.
Erase the communication log
To permanently erase all of the log contents,
1. In Standby mode, press [ ] → Tools →
Log.
2. Scroll right to switch to the communication
log.
3. Press <Options> → Clear log.
4. Press <Yes> to confirm.
22
To set a log duration,
1. In Standby mode, press [ ] → Tools →
Log.
2. Press <Options> → Settings.
3. Press the Confirm key.
4. Scroll to a duration and press the Confirm
key.
If you select No log, no communication
events will be stored in the log.
Gallery
media
Learn to use the media applications on your device:
Gallery, ShoZu, Video Editor, Viewer & Editor, Radio,
RealPlayer, and Recorder.
You can manage all your media files and
streaming internet links from Gallery.
Open a media file
1. In Standby mode, press [ ] → Media →
Gallery.
Your media files are automatically organised
by file type.
2. Scroll to a media folder and press the
Confirm key.
3. Scroll to a media file and press the Confirm
key.
23
Add a streaming internet link to
Gallery
media
1. In Standby mode, press [ ] → Media →
Gallery → Streaming links.
2. Press <Options> → New link → a memory
location (if necessary).
3. Enter a name and web address and press
<OK>.
Play streaming content from the
internet
1. In Standby mode, press [ ] → Media →
Gallery → Streaming links.
2. Scroll to a link and press the Confirm key.
RealPlayer will launch and ask if you want to
connect to the wireless web.
3. Press <Yes>.
24
ShoZu
With ShoZu, you can upload photos and
videos to your favourite websites and blogs,
and get the latest updates from them.
This is available only if supported by your
service provider or region.
Activate ShoZu
1. In Standby mode, press [ ] →
Applications → ShoZu → <Options> →
Login.
2. Enter your ShoZu ID and password and
press <OK>.
3. Scroll to an access point and press the
Confirm key (if necessary).
Create a new destination
Upload a file
1. In Standby mode, press [ ] →
Applications → ShoZu → Send to email
→ Send to new.
2. Select a file and press <Options> → Send.
3. Select a destination.
4. Press Send.
Video Editor
With Video Editor, you can edit or make videos
by combining photos or videos.
Crop a video
1. In Standby mode, press [ ] → Media →
Video Editor → Edit video.
2. Select a video file.
3. Press the Confirm key to start playback.
4. Mark the beginning and end of the new
video:
• Press <Options> → Set start at the
point where you want the new video to
begin.
• Press <Options> → Set end at the
point where you want the new video to
end.
25
media
1. In Standby mode, press [ ] →
Applications → ShoZu → Add sites →
<Options> → Add → <OK>.
2. Enter the name of the destination, your
email address, user name (if necessary),
and password.
3. Press <Options> → Save to add a new
destination.
media
5. Press <Options> → Settings and change
the properties for saving the video file, such
as image quality, name prefix, and memory
location.
6. When you are finished, press <Back> →
<Options> → Save.
7. Enter a new file name for the video and
press <OK>.
After saving the new video, the device plays
the video automatically.
Insert text
1. In Standby mode, press [ ] → Media →
Video Editor → Edit video.
2. Select a video file.
3. Press the Confirm key to start playback.
4. Press <Options> → Add subtitle.
5. Press <Options> → Play.
26
6. Press the Confirm key at the point where
you the text to be displayed.
7. Enter a text to insert.
8. Press the Confirm key and relocate the text.
To change the font size or colour for the
text, press <Options> → an option.
9. When you are finished, press <Done>.
10. Press the Confirm key at the point where
you want the text to be disappeared.
After adding the text, the device plays the
video automatically.
11. Press <Options> → Save.
12. Enter a new file name for the video and
press <OK>.
After saving the new video, the device plays
the video automatically.
Make a slideshow
1. In Standby mode, press [ ] → Media →
Video Editor → Edit video.
2. Select a video file.
3. Press the Confirm key to start playback.
4. Press <Options> → Audio and choose
one of the following options:
• Audio dubbing: Add one of the sounds
you have saved.
• Live dubbing: Add audio by recording a
new sound.
5. To add an existing sound, press
<Options> → Start dubbing → a sound.
To add a new sound, press the Confirm key
and record a sound.
6. When you are finished, press <Options>
→ Save.
7. Enter a new file name for the video and
press <OK>.
After saving the new video, the device plays
the video automatically.
You can combine photos to make a slideshow
with your favourite photos.
1. In Standby mode, press [ ] → Media →
Video Editor → Movie maker.
2. Select the photos you want and press
<Done>.
3. Select a sound.
4. While viewing photos, press <Options> to
use the following options:
Option
Customize
Description
Change the setting for
playing the slideshow
Modify
Change the photos or
music
Settings
Change the properties for
saving the video file, such
as image quality, default
label, and memory location
27
media
Add audio to a video
media
5. When you are finished, press <Options>
→ Save.
6. Enter a new file name for the video and
press <OK>.
After saving the new video, the device plays
the video automatically.
Make a storyboard
You can combine photos and videos to make a
storyboard.
1. In Standby mode, press [ ] → Media →
Video Editor → Storyboard.
2. Select the photos and videos you want and
press <Done>.
28
3. While viewing the storyboard, press
<Options> to use the following options:
Option
Effect
Preview
Description
Change the colour tone
or apply a special effect
Preview the slideshow
Insert → Insert
Insert a photo, a video, or
media, Insert
a text
text clip
Transition
Change how your
slideshow plays from one
video clip or photo to the
next
Narration →
Insert, Insert
with mix
Add audio to your
slideshow
Option
Duration
Description
Set the duration of
photos
Viewer & Editor
You can view photos stored in the device and
memory card, and use various options.
Remove a photo or a
video
View a photo
Move
Change the order of
photos
Settings
Change the properties
for saving the video file,
such as image quality,
default label, and
memory location
1. In Standby mode, press [ ] → Media →
Viewer & Editor.
2. Scroll to a photo and select it.
4. When you are finished, press <Options>
→ Save.
5. Enter a new file name for the video and
press <OK>.
After saving the new video, the device plays
the video automatically.
View a slideshow
1. In Standby mode, press [ ] → Media →
Viewer & Editor.
2. Scroll to a photo and press <Options> →
Slideshow.
29
media
Remove
Edit photos
Edit photos and apply fun effects.
Transform a photo
media
1. In Standby mode, press [ ] → Media →
Viewer & Editor.
2. Scroll to a photo and press <Options> →
Edit.
3. Scroll to Rotate & flip and select it.
4. Using the navigation key, rotate or flip the
photo as desired and press <Done>.
5. When you are finished, press <Options>
→ Save.
Crop a photo
1. In Standby mode, press [ ] → Media →
Viewer & Editor.
2. Scroll to a photo and press <Options> →
Edit.
3. Scroll to Crop and select it.
30
4. Using the navigation key, resize the
rectangle over the area you want to crop
and press <Done>.
5. When you are finished, press <Options>
→ Save.
Resize a photo
1. In Standby mode, press [ ] → Media →
Viewer & Editor.
2. Scroll to a photo and press <Options> →
Edit.
3. Scroll to Resize and select it.
4. Select a size and press <Done>.
5. When you are finished, press <Options>
→ Save.
Adjust a photo
1. In Standby mode, press [ ] → Media →
Viewer & Editor.
2. Scroll to a photo and press <Options> →
Edit.
Apply effects to a photo
1. In Standby mode, press [ ] → Media →
Viewer & Editor.
2. Scroll to a photo and press <Options> →
Edit.
3. Scroll to Effect and select it.
4. Scroll to an effect to apply and press
<Done>.
5. When you are finished, press <Options>
→ Save.
Insert a visual feature
1. In Standby mode, press [ ] → Media →
Viewer & Editor.
2. Scroll to a photo and press <Options> →
Edit.
3. Scroll to Frame, Add clipart, Add text, or
Add emoticon and select it.
4. Scroll to a visual feature (frame, clip art, or
emoticon), or enter the text to add and
press <Done> or <OK>.
5. Using the navigation key, relocate the visual
feature and press <Options> → Done (if
necessary).
To resize or rotate the visual feature, or
change the font size or colour for the text,
press <Options> → an option.
6. When you are finished, press <Options>
→ Save.
31
media
3. Scroll to Brightness & contrast, Auto
enhancement, or Color and select it.
4. Using the navigation key, adjust the photo
as desired and press <Done>.
5. When you are finished, press <Options>
→ Save.
Radio
You can listen to your favourite stations with the
FM radio.
media
Listen to the FM radio
1. Plug a headset into the multifunction jack.
2. In Standby mode, press [ ] → Media →
Radio.
3. Scroll left or right to scan through available
radio stations.
Set up your favourite radio station
list
Once you have set up a station list, you can
access the stations by scrolling up or down
from the radio screen.
32
Save radio stations by automatic tuning
1. From the radio screen, press <Options> →
Stations to access the station list.
2. Press <Options> → Auto-save stations.
3. Press <Yes> to confirm (this will replace
any existing stations).
4. When you are finished, press <Back>.
Save a radio station manually
1. From the radio screen, scroll to the radio
station you want.
2. Press <Options> → Save station.
3. Select an empty location.
4. Enter a station name and press <OK>.
Record the FM radio
1. From the radio screen, press <Options> →
Record to record the current station.
2. When you are finished, press <Stop>.
The recorded file is saved in Gallery.
Recorder
Your device includes RealPlayer for viewing
many types of media files and streaming
content from the internet. RealPlayer supports
files with the following extensions: 3gp, mp4,
rm, ram, ra, and rv.
You can use Recorder to record and play back
voice memos and sound clips.
Play a media file in RealPlayer
1. In Standby mode, press [ ] → Media →
RealPlayer → Video clips or Recently
played.
2. Locate a media file and press the Confirm
key.
Play streaming web content with
RealPlayer
When you open a link to streaming web content
via your web browser, RealPlayer will buffer and
play the content (see "Browse a web page"
X p. 42). You can then use the softkeys and
volume key to control options for the streaming
content.
Record a voice clip
1. In Standby mode, press [ ] → Media →
Recorder.
2. Press the Confirm key to begin the
recording.
3. When you are finished recording, press
<Stop>.
The voice clip is automatically saved.
Play a voice clip
1. In Standby mode, press [ ] → Media →
Recorder.
2. Press <Options> → Go to Gallery.
3. Scroll to a voice clip and press the Confirm
key. Playback begins automatically.
4. Use the on-screen buttons to control
playback.
33
media
RealPlayer®
media
PC Studio
Use PC Studio
PC Studio, which is included on the PC Studio
CD-ROM, is a Windows-based program that
allows you to manage your personal information
and sync files to your device. For more
information, install the program and refer to the
PC Studio help.
To connect your device to a PC with PC Studio,
you must change the device’s USB mode (see
"Use PC Studio" X p. 51).
Install PC Studio
1. Insert the PC Studio CD into a Windowscompatible PC.
2. Select a language for the setup program.
3. Follow the on-screen instructions.
During installation, the setup program will
automatically install the necessary USB
drivers.
34
DLNA
DLNA (Digital Living Network Alliance) is a home
networking service that enables you to share
media contents between audio and video
devices in your home by using the wireless
network connection. To use DLNA, you must
have DLNA compliant consumer electronics,
such as a compliant settop box or TV.
In Standby mode, press [
Applications → DLNA.
]→
Contacts
personal
productivity
Learn to manage contacts, schedule calendar
events, use Quickoffice and Adobe Reader, and
create notes.
Learn to use contact cards and groups to store
personal information, such as names, phone
numbers, and addresses.
Copy contact cards
To copy contact cards from one memory
location to another,
1. Open a contact list:
a. In Standby mode, press [ ] →
Contacts (device’s memory).
b. In Standby mode, press [ ] →
Contacts → <Options> → Settings →
Contacts to display → SIM memory →
<OK> → <Back>.
2. Scroll to a contact and press <Options> →
Copy → Phone memory or SIM memory.
35
Set a default number or address
Some contact cards may include more than
one number or address.
To assign a single number or address as the
default,
personal productivity
1. Open a contact list (see "Copy contact
cards." X p. 35).
2. Scroll to a contact and press the Confirm
key.
3. Press <Options> → Defaults.
4. Scroll to a default type and press the
Confirm key.
5. Scroll to a number or address and press
the Confirm key.
6. When you are finished, press <Back>.
36
Assign a speed dial number to a
contact card
You can assign speed dial numbers to up to
eight contact cards ([2] through [9]); [1] is
reserved as a speed dial number for your voice
mail.
To assign a speed dial number,
1. In Standby mode, press [ ] → Contacts.
2. Scroll to a contact and press the Confirm
key.
3. Scroll to a phone number and press
<Options> → Assign speed dial.
4. Scroll to a speed dial number and press the
Confirm key.
5. Press <Yes> (if necessary).
Assign a ringtone to a contact card
or group
You can assign a ringtone to any contact card
or group.
For an individual contact, your device will use
the ringtone that was assigned last to the
contact card. For example, if you assign a
ringtone to a group and then assign another
ringtone to a contact card within that group,
the device will use the ringtone assigned to
the contact card when that contact calls.
You can create groups of contacts and send
messages to the entire group.
1.
2.
3.
4.
5.
6.
7.
8.
9.
In Standby mode, press [ ] → Contacts.
Scroll right to switch to the group list.
Press <Options> → New group.
Enter a name and press <OK>.
Scroll to your new group and press the
Confirm key to open it.
Press <Options> → Add members.
Scroll to each contact you want to add and
press the Confirm key.
When you are finished selecting contacts,
press <OK> to save them to the group.
Press <Yes> (if necessary).
37
personal productivity
1. In Standby mode, press [ ] → Contacts.
2. Scroll to a contact and press the Confirm
key.
Or, scroll to a group.
3. Press <Options> → Ringing tone.
4. Scroll to a ringtone and press the Confirm
key.
Create a contact group
Synchronise your contacts
To synchronise your contacts by using the
current sync profile,
personal productivity
1. In Standby mode, press [ ] → Contacts.
2. Scroll to a contact and press <Options> →
Synchronisation → Start.
3. Scroll to a sync profile or device and press
the Confirm key.
To change sync profiles or settings, see
"Synchronise your device." X p. 52
Calendar
Use the calendar to keep track of
appointments, birthdays, or other events.
Create a calendar event
1. In Standby mode, press [ ] → Office →
Calendar.
2. Scroll to a date and press <Options> →
New entry → an event type.
38
3. Complete the fields and adjust the settings
for your event.
4. When you are finished, press <Done> to
save your entry.
In the Synchronisation field, you can
specify whether an event is Private (seen
only by you), Public (seen by anyone with
access to your data after you sync), or None
(not synchronised).
Change the calendar view
1. In Standby mode, press [ ] → Office →
Calendar.
2. Press <Options> → a view type.
Stop an event alarm
If you set an alarm for a calendar event, the
alarm will sound for one minute at the specified
time. To stop the alarm, press <Stop>.
Quickoffice®
Adobe® Reader®
With Quickoffice, you can open Word, Excel,
and PowerPoint files on your device.
With Adobe Reader, you can open and view
PDF documents.
1. In Standby mode, press [ ] → Office →
Quickoffice.
2. Scroll to a memory and press the Confirm
key.
3. Scroll to a document and press the Confirm
key.
Update Quickoffice
With Quickmanager, you can download
program updates, new Quickoffice products, or
special offers.
1. In Standby mode, press [ ] → Office →
Adobe PDF.
2. Scroll to a file and press the Confirm key.
3. While viewing a document, press
<Options> to use the following options:
personal productivity
Open a Quickoffice document
Option
Zoom
Description
Magnify part of a document
Find
Search for text
View
Use the full display for viewing
or rotating the document
Go to
Skip to another page
1. In Standby mode, press [ ] → Office →
Quickoffice → Updates & upgrades.
2. Scroll to a Quickmanager item and press
the Confirm key.
39
Notes
With Notes, you can create text notes and
synchronise them with other devices.
personal productivity
Create a note
1. In Standby mode, press [ ] → Office →
Notes.
2. Press the Confirm key to create a new
note.
3. Enter text.
4. When you are finished entering text, press
<Done> to save the note.
Synchronise notes with other
devices
1. In Standby mode, press [ ] → Office →
Notes.
2. Scroll to a note and press <Options> →
Synchronisation → Start.
40
3. Scroll to a sync profile or device and press
the Confirm key.
To change sync profiles or settings, see
"Synchronise your device." X p. 52
web
Your device allows you to connect to the
wireless web with the built-in web browser. To
connect to the web, you must:
• Subscribe to a wireless network that
supports data calls
• Activate the data service for your SIM card
• Obtain an internet access point from a
service provider
• Define your web settings
Your device is preset to access the wireless
web. If you cannot connect to the web,
contact your service provider to download
new browser settings.
41
Browse a web page
web
1. In Standby mode, press [ ] → Web.
The device shows the list of bookmarks
and folders.
2. Access a web page:
• Scroll to a bookmark or folder and press
the Confirm key
• Enter a web address and press the
Confirm key
3. While browsing a web page, press and
hold the Confirm key to display or hide the
toolbar:
Icon
Description
Frequently used links
Page overview
Reload
Find
42
4. To close the web connection, press
<Close>.
• If your device shows "Not enough
memory," close other running applications
to free up the memory, and then restart the
browser.
• The device will show a security indicator
( ) whenever you have established an
encrypted connection.
Add a bookmark
1. In Standby mode, press [ ] → Web.
2. Press <Options> → Bookmark manager
→ Add bookmark.
3. Enter the bookmark name, address, and
access point, as well as a user name and
password if desired.
4. Press <Options> → Save.
Use a bookmark
While browsing, you can also access
bookmarks (see "Add a bookmark" X p. 42).
Press <Options> → Bookmarks to access the
following:
Description
Start page of the access point
Folder of recently visited pages
Folder you have created
Default folder
When you save a web page, you can view a
copy of it offline without connecting to the web.
The saved copy will not update automatically,
so you must reconnect to the web periodically
to retrieve the current version.
Save a web page
1. Use your browser to access the web page
(see "Browse a web page" X p. 42).
2. Press <Options> → Tools → Save page.
The web page is saved to your device.
Web feed folder
Bookmark
43
web
Icon
Save a web page and view it
offline
View a saved web page
web
1. In Standby mode, press [ ] → Web.
2. Scroll to Saved pages and press the
Confirm key.
3. Scroll to a saved web page and press the
Confirm key.
4. To update the web page, press <Options>
→ Navigation options → Reload.
Download files from the web
When you download files from the web, your
device stores them in a corresponding folder in
Gallery. For example, your device will store
downloaded images in the Images folder.
Files you download from the web can
include viruses that will damage your
device. To lessen your risk, only download
files from sources you trust.
44
Some media files include Digital Rights
Management to protect copyrights. This
protection may prevent you from
downloading, copying, modifying, or
transferring some files.
Download
Application download provides you an easy
and quick way to shop for mobile applications.
With this service, you can buy and download
various applications directly without searching
for applications every time. This is available only
if supported by your service provider or region.
In Standby mode, press [
→ Download.
] → Applications
GyPSii
Sign up for the GyPSii service
1. In Standby mode, press [ ] → Samsung
LBS → GyPSii.
2. Press <Options> → Sign up.
3. Enter your account information and press
the Confirm key.
4. Press <Yes> to connect to the GyPSii
service.
5. Enter your user name and password, and
then press <OK>.
Upload place information
1. In Standby mode, press [ ] → Samsung
LBS → GyPSii → PlaceMe.
2. Enter your place information.
3. To add image, video, or sound files, press
<Options> → Insert new or Insert media.
4. When you are finished, press <Options>
→ Send.
5. Press <Yes> to connect to the GyPSii
service.
Find a friend’s current location
1. In Standby mode, press [ ] → Samsung
LBS → GyPSii → SpaceMe.
2. Press <Options> → Refresh to update the
friend list.
3. Scroll to a friend and press the Confirm key.
45
web
GyPSii is a mobile social networking service
that allows you to share place information about
restaurants and other businesses with others.
You can also use GyPSii to find your current
position and locate places via GPS.
Find your current location
web
1. In Standby mode, press [ ] → Samsung
LBS → GyPSii → FindMe.
2. Press <Options> → Refresh to update the
map. Your current location will be shown on
the map.
Search for a place
1. In Standby mode, press [ ] → Samsung
LBS → GyPSii → ExploreMe.
2. Enter information about a place to search.
3. Press <Options> → Explore.
fring™
fring is a mobile internet and community service
that enables you to chat with friends who use
other types of messengers, make affordable
local and international calls through the internet,
and transfer media files. With fring, you can
experience PC-like benefits on your mobile
device. For more information, contact your
service provider.
In Standby mode, press [
→ fring.
] → Applications
Google
Launch the Google search engine to find
information, news, images, or local services
from around the web. You can also access
email services and map services.
In Standby mode, press [
46
] → Google.
Yahoo! Go
Launch the Yahoo search engine to find
information, news, images, or local services
from around the web. You can also use the
messenger service.
web
In Standby mode, press [
→ Yahoo! Go.
] → Applications
This is available only if supported by your
service provider or region.
CNN
Watch CNN news on your mobile device. For
more information, contact your service provider.
In Standby mode, press [
→ CNN.
] → Applications
This is available only if supported by your
service provider or region.
47
connectivity
Learn to transfer data to and from your device via
the Bluetooth wireless feature or the PC data cable.
Use the Bluetooth wireless
feature
You can connect with other Bluetooth-enabled
wireless devices over a distance of 10 metres
(30 feet). Walls or other obstacles between
devices may block or impair the wireless
connection.
Turn on the Bluetooth wireless
feature
1. In Standby mode, press [ ] →
Connectivity → Bluetooth.
2. Scroll to Bluetooth and press the Confirm
key.
3. To make your device visible to others, scroll
to My phone's visibility and press the
Confirm key.
4. Select a visibility option and press the
Confirm key.
48
Search for and pair with a
Bluetooth-enabled device
Your device searches for and displays the
list of Bluetooth-enabled devices:
Icon
Device type
Mobile phone
To pair with another Bluetooth-enabled
device, both devices must use the same
passcode. Headsets or hands-free car kits
may use a fixed passcode, such as 0000.
6. To allow the device to send and receive
data without confirmation, press <Yes>.
Otherwise, press <No> to require
confirmation.
PC
Send data via the Bluetooth
wireless feature
Hands-free car kit
1. Select a file or item to send.
2. Press <Options> → Send or Send
business card → Via Bluetooth.
3. Scroll to a paired device and press the
Confirm key.
4. Enter a passcode and press <OK> (if
necessary).
Headset or audio device
Unknown device
4. Scroll to a device and press the Confirm
key.
49
connectivity
1. In Standby mode, press [ ] →
Connectivity → Bluetooth.
2. Scroll right to open the paired device list.
3. Press <Options> → New paired device.
5. Enter a Bluetooth passcode and press
<OK>.
Receive data via the Bluetooth
wireless feature
connectivity
1. When another device attempts to access
yours, press <Yes> to permit the
connection.
2. Press <Yes> again to confirm that you are
willing to receive data from the device (if
necessary).
Accepted items are placed in the Inbox
folder. The
icon indicates messages
received via Bluetooth.
Activate Remote SIM mode
To use Remote SIM mode with a compatible
hands-free car kit,
1. Connect to your device from an authorised
hands-free car kit.
50
2. In Standby mode, press [ ] →
Connectivity → Bluetooth → Remote
SIM mode → On.
You can now make or answer calls only
with the connected hands-free car kit via
the SIM card on your device.
To deactivate it, press [
SIM mode.
] → Exit remote
Print data
To print your image, message, contact
information, and calendar item with the
Bluetooth wireless feature,
1. In Standby mode, press [ ] → Tools →
Print OTG → an item type → an item.
2. Press <Open>.
3. Press <Options> → Print.
4. Press the Confirm key.
5. Scroll to a printer and press the Confirm
key.
Use PC Studio
Set a default action for your USB
connection
1. Change the USB connection to PC Studio.
2. Connect your device to a PC with the PC
data cable.
3. Run PC Studio and manage personal data
and media files.
To set your device to perform a default action
when you connect the device to a PC with the
PC data cable,
1. In Standby mode, press [ ] →
Connectivity → USB → USB connection
mode.
2. Set the default USB mode (PC Studio,
Mass storage, Image transfer, or Media
transfer).
You can also set your device to Ask on
connection, instead of using a default USB
mode. If you use this setting, your device will
prompt you to choose the USB mode every
time you connect to a PC.
Refer to the PC Studio help for more
information.
Copy files to a memory card
1. Insert a memory card into the device.
2. Change the USB connection to Mass
storage.
3. Connect your device to a PC with the PC
data cable.
4. Select Open folder to view files when a
pop-up window appears on your PC.
5. Copy files from the PC to the memory card.
6. When you are finished, disconnect the
device from the PC.
51
connectivity
Connect via USB
Synchronise with Windows Media
Player
You can copy music files to the device by
synchronising with Windows Media Player 11.
connectivity
1. Change the USB connection to Media
transfer.
2. Connect your device to a PC with the PC
data cable.
3. Select Sync digital media files to this
device when a pop-up window appears on
your PC.
4. Enter the name of your device and click
Finish.
5. Select and drag the music files you want to
the sync list.
6. Click Start Sync.
7. When synchronisation is finished,
disconnect the device from the PC.
52
Synchronise your device
Learn to synchronise the data on your device
with data on a PC or other wireless device.
Create a new sync profile
Your device includes a sync profile for PC
Studio.
To create a new sync profile,
1. In Standby mode, press [ ] →
Connectivity → Sync.
2. Press <Options> → New sync profile.
3. Press <Start> to start the sync profile
wizard and follow the on-screen
instructions.
Synchronise data
connectivity
1. Connect your device to another Bluetoothenabled wireless device (see "Search for
and pair with a Bluetooth-enabled device"
X p. 49).
2. In Standby mode, press [ ] →
Connectivity → Sync.
3. Press <Options> → Synchronise.
4. Scroll to a device and press the Confirm
key (if necessary).
Your device displays a progress metre at
the bottom of the screen.
After synchronisation is complete, you can
press <Options> → View log to view a list
of data that was changed.
53
Calculator
additional
programs
Learn to use Calculator, Clock, Converter, and
Smart reader.
1. In Standby mode, press [ ] → Office →
Calculator.
2. Use the alphanumeric keys and the
navigation key to perform basic
mathematical operations.
Press [ ] to insert a decimal. Press [C] to
clear a result. Press [ ] to switch functions.
Clock
You can adjust clock settings, set alarms, and
create a world clock.
Change clock settings
1. In Standby mode, press [ ] → Office →
Clock.
2. Press <Options> → Settings.
54
Create a world clock
1. In Standby mode, press [ ] → Office →
Clock.
2. Scroll right to the alarms view.
3. Press <Options> → New alarm.
4. Set alarm details.
5. Press <Done>.
With a world clock, you can monitor the time in
another city.
Stop an alarm
When an alarm sounds, press <Stop> to end
the alarm or <Snooze> to repeat the alarm
after a specified time. You can delay the alarm
(snooze) up to five times.
Your current profile setting will not affect the
volume of a clock alarm.
To create a world clock,
1. In Standby mode, press [ ] → Office →
Clock.
2. Scroll right to the world clock view.
3. Press <Options> → Add location.
4. Scroll to a city and press the Confirm key,
or enter the first few letters of the city name
to search the list.
5. Repeat steps 3 and 4 to add more cities (if
necessary).
6. When you are finished adding cities, press
<Exit>.
55
additional programs
Set a new alarm
Converter
With Converter, you can convert measurements
or currencies from one unit to another. To
convert currencies, you must first set a base
currency and exchange rate.
additional programs
Add currencies and exchange rates
The value of the base currency is always 1.
You must enter exchange rates for other
currencies as they relate to one unit of the
base currency. Exchange rates change
often. To ensure an accurate conversion,
you must enter a current exchange rate.
To set a base currency,
1. In Standby mode, press [ ] → Office →
Converter.
2. Scroll right until the type shows Currency (if
necessary).
3. Press <Options> → Currency rates.
56
4. Scroll to a currency and press <Options>
→ Rename currency.
5. Enter the name of the base currency and
press <OK>.
6. Press <Options> → Set as base
currency.
7. Press <Yes> to confirm.
To add other currencies and exchange rates,
1. Repeat steps 1-4 above.
2. Enter the name of a new currency and
press <OK>.
3. Scroll to the new currency and enter the
exchange rate.
4. Press <Options> → Save.
Convert currencies
Convert measurements
1. In Standby mode, press [ ] → Office →
Converter.
2. Scroll right to change the type of
measurement.
3. Scroll down to Unit and scroll right to
change the base unit (if necessary).
4. Scroll down to Amount and enter the base
amount.
5. Scroll down to Unit and scroll right to
change the conversion unit (if necessary).
The device displays the conversion result.
GPS data
You can view GPS data to help you navigate,
show your position, or monitor trip details.
Before you can use GPS data, you must
activate a positioning method via a Bluetooth
wireless connection or a wireless network
connection.
• Avoid contact with your internal GPS
antenna for better GPS performance.
Internal GPS
antenna area
• The GPS signal can be affected by your
geographical position or physical
environment.
57
additional programs
1. In Standby mode, press [ ] → Office →
Converter.
2. Scroll right until the type shows Currency (if
necessary).
3. Scroll down to Unit and scroll right to select
a currency to convert.
4. Scroll down to Amount and enter the
amount to convert.
5. Scroll down to Unit and scroll right to select
a currency to convert to.
The device displays the conversion result.
Activate a positioning method
additional programs
1. In Standby mode, press [ ] → Tools →
GPS data.
2. Press <Options> → Positioning settings
→ Positioning methods.
3. Scroll to a positioning method (Integrated
GPS, Bluetooth GPS, or Network based)
and press <Options> → Enable.
If you enable Bluetooth GPS, you must pair
with a Bluetooth-enabled device (see
"Search for and pair with a Bluetoothenabled device" X p. 49). Once you activate
a positioning method, your device will
attempt to open that connection when you
launch GPS data.
Navigate with GPS data
1. In Standby mode, press [ ] → Tools →
GPS data → Navigation.
2. Press <Options> → Set destination →
Coordinates.
58
3. Enter the latitude and longitude of your
destination and press <OK>.
Your device will display the direction of your
destination, your current speed, and the
duration of your trip.
4. To stop the GPS navigation, press
<Options> → Stop navigation.
View your current position
In Standby mode, press [
data → Position.
] → Tools → GPS
Monitor trip details
1. In Standby mode, press [ ] → Tools →
GPS data → Trip distance.
2. Press <Options> → Start.
Your device will track trip details, including
distance, time, and speed.
3. To stop monitoring trip details, press
<Options> → Stop.
Download data for expanding GPS
navigation
You can expand your navigation to area where
cellular networks are not accessible. First,
download a GPS+ data file.
You can use the Samsung mobile navigator to
show your position and navigate a way. This
feature is available only if supported by your
service provider. For details, see the quick start
guide of the mobile navigator.
In Standby mode, press [
→ Navigation.
] → Samsung LBS
Landmarks
With Landmarks, you can save your current
location or manually enter new locations.
1. In Standby mode, press [ ] → Tools →
Landmarks.
2. Press <Options> → New landmark →
Current position or Enter manually.
To add your current location automatically,
your device must have an active connection.
59
additional programs
1. In Standby mode, press [ ] → Samsung
LBS → GPS +.
2. Press <Yes> to connect to the server.
3. Press <OK> and select a default access
point.
4. Select Download data → <Yes>.
You incur addition charges for accessing
the web and downloading data.
Navigation
3. Enter details about the landmark (if
necessary).
4. When you are finished entering landmark
information, press <Done>.
additional programs
Smart reader
Smart reader allows you to take a photo of a
name card and extract contact information from
the card, and save it as a new contact in
Contacts.
• Hold the device firmly while taking the
name card.
• Be careful not to let any shadows on the
name card.
• Place the name card on level, evenly lit
place and photograph it.
• Depending on the shooting environment,
the result of the name card conversion
may not be satisfying.
60
1. In Standby mode, press [ ] → Office →
Smart reader.
2. Center the name card within the frame.
3. Press the Confirm key or the Camera key to
take the photo.
Your device recognises the name card and
converts it to contact card format.
4. Press <Options> → Save to save the
contact card.
File manager
managers
Learn to manage files, zip achives, applications,
device configurations, licences, and connections.
With File manager, you can search for and
organise your files or folders.
Search for a file or folder
1. In Standby mode, press [ ] → Office →
File mgr. → a memory type.
2. Press <Options> → Find.
3. Scroll to a memory type and press the
Confirm key (if necessary).
4. Select a desired folder and enter text in the
search field and press the Confirm key.
5. To open a file or folder from the search
results, scroll to the file or folder and press
the Confirm key.
61
Create a new folder
managers
1. In Standby mode, press [ ] → Office →
File mgr. → a memory type.
2. Press <Options> → Organise → New
folder.
3. Enter a folder name and press <OK>.
Move a file to a folder
1. In Standby mode, press [ ] → Office →
File mgr. → a memory type.
2. Scroll to a file or folder and press
<Options> → Organise → Move to folder.
3. Scroll to a folder and press the Confirm key.
4. Scroll to a subfolder and press the Confirm
key (if necessary).
5. Press the Confirm key.
62
Format a memory card
Your device supports FAT16 or FAT32 file
systems.
1. Insert a memory card (see the Quick Start
Guide).
2. In Standby mode, press [ ] → Office →
File mgr. → the inserted memory card.
3. Press <Options> → Memory card
options → Format.
4. Press <Yes> to confirm.
Protect a memory card with a
password
Devices that do not support this feature,
such as PCs, cannot read the card while the
password protection is active. Remove the
password protection from the card to use it
with those devices.
View memory details
You can view the used and available memory
on your device and memory card,
1. In Standby mode, press [ ] → Office →
File mgr. → a memory type.
2. Press <Options> → Details → Folder,
Memory card, or Memory.
Zip
You can create and manage zip archives saved
in your phone’s memory or the memory card.
Create a new archive
1. In Standby mode, press [ ] → Office →
Zip.
2. Press <Options> → New archive.
3. Enter a name for the archive and press
<OK>.
4. Press <Options> → Add to archive → a
file.
Extract a file to another folder
1. In Standby mode, press [ ] → Office →
Zip.
2. Scroll to an archive and press the Confirm
key.
63
managers
1. In Standby mode, press [ ] → Office →
File mgr. → the inserted memory card.
2. Press <Options> → Memory card
password → Set.
3. Enter and confirm a password (up to 8
characters).
4. Press <OK>.
5. To remove the password, press <Options>
→ Memory card password → Remove.
6. Press <Yes>.
7. Enter the password and press <OK>.
3. Scroll to a file and press <Options> →
Extract → a memory type.
4. Select a folder to extract the file.
managers
Application manager
Your device supports applications made for the
Symbian OS and the Java platform, Micro
Edition (J2ME™). Your device will not support
applications made for other operating systems
or Java platforms (including PersonalJava™).
To download applications to your device, see
"Download files from the web." X p. 44
Install a new application
1. In Standby mode, press [ ] → Tools →
App. mgr. → Installation files.
2. Scroll to an application and press
<Options> → Install.
64
3. Follow any on-screen instructions.
The application manager automatically tries
to verify an application's digital signatures
and certificates during installation and will
show a warning if the application does not
meet normal security requirements. To
protect your device and your data, do not
install applications that do not have valid
digital signatures or certificates.
Remove an application
1. In Standby mode, press [ ] → Tools →
App. mgr. → Installed apps.
2. Scroll to an application and press
<Options> → Uninstall.
3. Press <Yes> to confirm.
Start a configuration session
This feature is network-dependent and may not
be available from your service provider. If
available, Device manager allows your service
provider to assist you with device
configurations. Before you can start a
configuration session, you must define a server
profile.
1. In Standby mode, press [ ] → Tools →
Device mgr.
2. Press <Options> → Server profiles.
3. Scroll to a server profile and press
<Options> → Start configuration.
4. Press <Yes> to confirm.
5. Scroll to an access point and press the
Confirm key (if necessary).
Define a server profile
1. In Standby mode, press [ ] → Tools →
Device mgr.
2. Press <Options> → Server profiles.
3. Press <Options> → New server profile.
4. Set the server options according to the
instructions provided by your service
provider.
5. When you are finished setting the options,
press <Back>.
managers
Device manager
Licence manager
When you download digital content, you may
need to purchase a licence from the website
that allows you to access the file.
65
View licences
managers
1. In Standby mode, press [ ] → Tools →
Licences.
2. Scroll to a folder and press the Confirm key.
3. Scroll to a licence and press the Confirm
key.
Restore an expired licence
When your licence expires, you must purchase
additional rights to use the media file.
To restore an expired licence,
1. In Standby mode, press [ ] → Tools →
Licences.
2. Scroll to Invalid licences and press the
Confirm key.
3. Scroll to a licence and press <Options> →
Get new licence.
4. Press <Yes> to confirm.
5. Follow the on-screen instructions.
66
Connection manager
With Connection manager, you can view the
details of data connections and close open
connections.
View connection details
1. In Standby mode, press [ ] →
Connectivity → Conn. mgr. → Active
data connections.
2. Scroll to a connection and press
<Options> → Details.
Close an open connection
1. In Standby mode, press [ ] →
Connectivity → Conn. mgr. → Active
data connections.
2. Scroll to a connection and press
<Options> → Disconnect.
3. Press <Yes> to confirm.
View wireless connection details
managers
1. In Standby mode, press [ ] →
Connectivity → Conn. mgr. → Available
WLAN networks.
2. Scroll to a connection and press
<Options> → Details..
Your device uses a non-harmonised
frequency and is intended for use in the
following counties: Germany, Ukraina,
Russia, Kazakhstan.
67
settings
Learn about your device settings. To access
your device settings,
1. In Standby mode, press [ ] → Settings →
Settings.
2. Scroll to a category (General, Phone,
Connection, or Applications) and press
the Confirm key.
You can also access some settings from
other menus: press <Options> → Settings.
General settings
Personalisation
Control the appearance and behavior of your
display, Standby mode, tones, and language
(for Themes settings, see the Quick Start
Guide).
68
Positioning
Control the appearance and behavior of the
date, time, and alarms.
Control the methods and servers your device
uses to retrieve global positioning information.
Enhancement
Phone settings
Set the device to use the headset, headphone,
car kit, or another device as the default
enhancement: press <Options> → Set as
default.
settings
Date and time
Call
Security
Control how your device handles calls with
caller ID, call waiting, speed dial, and other call
settings.
Set security codes and manage security
certificates or security modules.
Call divert
Factory settings
Divert incoming calls to another number. When
you divert calls, you must specify a receiving
number or delay time for diverted calls.
Reset settings to their factory defaults. You
must enter the lock code to reset the device.
After entering the code, the device will restart.
69
settings
Call barring
Packet data
Restrict outgoing, incoming, and international
calls.
Control packet data connections when using a
GPRS network.
Network
Wireless LAN
Control network modes and selection methods.
Control the use of wireless LAN availability.
Connection settings
Configurations
Bluetooth
Control the Bluetooth wireless feature.
USB
Control how your device behaves when you
connect it to a PC.
Destinations
Control access point connections, passwords,
and homepages.
70
View network configurations received from your
service provider. To apply the configurations,
press <Options> → Save.
FM Transmitter
Select a radio frequency and use your device
function as a radio transmitter. You can listen to
your device’s sounds through a radio, including
ringtones, key tones, music, and GPS
navigation sounds.
This is available only if supported by your
service provider or region.
Applications settings
RealPlayer
settings
Control how RealPlayer behaves when playing
videos or streaming media.
Camera
Control how the camera behaves when you
capture images or videos.
Voice recorder
Control the quality and memory location of
voice clips.
App. manager
Control how your device behaves when you
install new applications.
Log
Set how long Log will store call and packet data
information.
71
troubleshooting
While using your device, the
following messages may appear:
a
Message
Insert SIM
card
Try this to solve the problem:
Ensure that the SIM card is
installed correctly.
Locked
The autolock feature is enabled.
To unlock, press and hold [ ].
To disable the autolock feature,
1. In Standby mode, press
[ ] → Settings → Settings
→ General → Security →
Phone and SIM card.
2. Set the phone autolock
period to None.
Message
Enter PIN
code
Try this to solve the problem:
When using the device for the
first time or when the PIN
requirement feature is enabled,
you must enter the PIN supplied
with the SIM card. To disable the
PIN requirement feature,
1. In Standby mode, press
[ ] → Settings → Settings
→ General → Security →
Phone and SIM card.
2. Set the PIN code request to
Off.
Message
Your device does not show a signal (no
bars next to the network icon)
• If you just turned on the device, wait about 2
minutes for your device to find the network
and receive a signal.
• You may not be able to receive a signal in
tunnels or elevators. Move to an open area.
• You may be between service areas. You
should receive a signal when you enter a
service area.
You forgot a security code, PIN, or PUK
The default lock code is 00000000. If you
forget or lose this or another code, contact the
seller or your service provider.
Your display shows white lines
The display may show white lines if you have
turned the device on after a long period of
disuse or if you removed the battery without first
turning off the device. The display should
correct itself in a short time.
You enter a number, but the call is not
dialled
• Ensure that you have pressed [
].
• Ensure that you have accessed the right
cellular network.
• Ensure that you have not set call barring for
the phone number.
b
troubleshooting
X attempts
remaining.
Enter PUK
code
Try this to solve the problem:
Your SIM card is blocked,
usually as a result of entering
your PIN incorrectly several
times. You must enter the PUK
supplied by your service
provider.
You select a contact to call, but the call
is not dialled
• Ensure that the correct number is stored in
the contact information.
• Re-enter and save the number, if necessary.
troubleshooting
Another caller cannot hear you
speaking
• Ensure that you are not blocking the built-in
microphone.
• Move the built-in microphone closer to your
mouth.
• If using a headset, ensure that it is properly
connected.
The sound quality of a call is poor
• Ensure that you are not blocking the internal
antenna on top of the device.
• When you are in areas with weak signals,
you may lose reception. Move to another
area and try again.
c
The battery does not charge properly or
sometimes your device turns itself off
while charging
• Disconnect the device from the charger,
remove and reinstall the battery, and try
charging again.
• The battery terminals may be dirty. Wipe
both gold-coloured contacts with a clean,
soft cloth and try charging the battery again.
• If the battery no longer charges completely,
dispose of the old battery properly and
replace it with a new battery.
Your device is hot to the touch
When you use several applications at once,
your device requires more power and may heat
up. This is normal and should not affect your
device’s lifespan or performance.
Your device prompts you to delete
some data
The available memory is low. Move your data to
a memory card or delete old items from
applications.
• Ensure that each device's visibility is not set
to Hidden.
• Ensure that both devices are compatible
with Bluetooth wireless technology.
troubleshooting
An application is frozen (will not
respond)
1. Press and hold [ ] to open the application
list.
2. Scroll to the application that is frozen and
press [C] and then <Yes>.
3. Launch the application again.
You cannot find a Bluetooth-enabled
device
• Ensure that both devices have activated the
Bluetooth wireless feature.
• Ensure that the distance between the
devices is not more than 10 metres and that
they are not separated by walls or other
obstacles.
d
index
access points, 70
creating events, 38
stopping event alarms, 38
Adobe Reader, 39
numbers, 36
creating contact groups, 37
synchronising, 38
calls
applications
installing, 64
supported, 64
verifying certificates, 64
Bluetooth
activating, 48
connecting to other devices,
barring (blocking), 70
diverting, 69
clock
changing settings, 54
creating world clock, 55
setting alarms, 55
stopping alarms, 55
49
receiving data, 50
sending data, 49
calendar
changing views, 38
e
contacts
assigning default numbers or
addresses, 36
assigning ringtones, 37
assigning speed dial
converter
adding currencies, 56
converting currencies, 57
converting measurements,
57
setting exchange rates, 56
date and time, 69
device manager
defining server profiles, 65
starting a configuration, 65
DLNA, 34
enhancement, 69
files and folders
radio, 32
notes
recorder, see media
creating notes, 40
synchronising, 40
gallery, see media
packet data, 21, 70
GyPSii, 45
PC Studio
licences, 66
media
accessing streaming
content, 24, 33
opening files in Gallery, 23
playing media files, 23, 33
playing voice clips, 33
recording voice clips, 33
installing, 34
setting USB mode, 51
using, 51
RealPlayer, see media
index
creating new folders, 62
file manager, 61
moving, 62
searching, 61
memory cards
formatting, 62
protecting, 62
security, 69
ShoZu, 24
smart reader, 60
video editor, 25
Zip, 63
PDF, see Adobe Reader
Quickoffice
opening documents, 39
updating quickoffice, 39
f
Declaration of Conformity (R&TTE)
We,
Samsung Electronics
declare under our sole responsibility that the product
GSM Mobile Phone : I7110
to which this declaration relates, is in conformity with the following
standards and/or other normative documents.
SAFETY
EN 60950- 1 : 2001 +A11:2004
EMC
EN 301 489- 01 V1.6.1 (09-2005)
EN 301 489- 07 V1.3.1 (11-2005)
EN 301 489- 09 V1.4.1 (11-2007)
EN 301 489- 17 V1.2.1 (08-2002)
EN 301 489- 24 V1.3.1 (11-2005)
EN 301 357- 2 V1.3.1 (07-2006)
SAR
EN 50360 : 2001
EN 62209-1 : 2006
RADIO
EN 301 511 V9.0.2 (03-2003)
EN 300 328 V1.7.1 (10-2006)
EN 301 908- 1 V3.2.1 (05-2007)
EN 301 908- 2 V2.2.1 (10-2003)
We hereby declare that [all essential radio test suites have been
carried out and that] the above named product is in conformity to all
the essential requirements of Directive 1999/5/EC.
The conformity assessment procedure referred to in Article 10 and
detailed in Annex[IV] of Directive 1999/5/EC has been followed with
the involvement of the following Notified Body(ies):
BABT, Balfour House, Churchfield Road,
Walton-on-Thames, Surrey, KT12 2TD, UK*
Identification mark: 0168
The technical documentation kept at :
Samsung Electronics QA Lab.
which will be made available upon request.
(Representative in the EU)
Samsung Electronics Euro QA Lab.
Blackbushe Business Park, Saxony Way,
Yateley, Hampshire, GU46 6GG, UK*
2008.10.20
(place and date of issue)
Yong-Sang Park / S. Manager
(name and signature of authorised person)
* It is not the address of Samsung Service Centre. For the address or the
phone number of Samsung Service Centre, see the warranty card or
contact the retailer where you purchased your phone.
Some of the contents in this manual may differ from your device depending on the software of the
device or your service provider.
World Wide Web
http://www.samsungmobile.com
English (EU). 11/2008. Rev. 2.0