Mazda Navigation system Owner`s manual

Owner’s Manual
NALB
Form No. NALB-EA-13F (9999-95-038C-14NAV)
©2013 Mazda Motor Corporation
Printed in Japan Sep. 2013 (Print2)
NAV-6AVUAEA.indb 1
2013/07/31 10:51:30
NAV-6AVUAE.indb 2
2013/05/07 18:21:40
Table of contents
1 Warnings and Safety information .......................................................................... 6
2 Getting started ......................................................................................................... 7
2.1 Navigation menu .............................................................................................................7
2.2 Buttons and other controls on the screen ........................................................................8
2.2.1 Using keyboards .....................................................................................................................8
2.2.2 Press and Hold ........................................................................................................................9
2.3 Map screen ....................................................................................................................10
2.3.1 Navigating on the map ..........................................................................................................10
2.3.2 Position markers ...................................................................................................................11
2.3.2.1 Selected map location (Cursor) and selected map object ............................................................ 11
2.3.3 Objects on the map ...............................................................................................................11
2.3.3.1 Streets and roads ........................................................................................................................... 11
2.3.3.2 Turn preview and Next street ........................................................................................................ 12
2.3.3.3 Lane information and Signposts ................................................................................................... 13
2.3.3.4 Junction view ................................................................................................................................. 14
2.3.3.5 Highway/Freeway exit services .................................................................................................... 14
2.3.3.6 Elements of the active route .......................................................................................................... 15
2.3.4 Manipulating the map ............................................................................................................16
2.3.5 Checking the details of the current position (Where Am I?) ................................................18
3 On-road navigation ............................................................................................... 20
3.1 Selecting the destination of a route ...............................................................................20
3.1.1 Entering an address or a part of the address ..........................................................................21
3.1.1.1 Entering an address ...................................................................................................................... 21
3.1.1.2 Entering the midpoint of a street as the destination ..................................................................... 23
3.1.1.3 Selecting an intersection as the destination ................................................................................. 25
3.1.1.4 Selecting a city/town center as the destination ............................................................................. 27
3.1.1.5 Entering an address with a postal code ........................................................................................ 29
3.1.2 Selecting the destination from the Places of Interest ............................................................32
3.1.2.1 Quick search for a Place of Interest ............................................................................................. 32
3.1.2.2 Searching for a Help nearby ......................................................................................................... 34
3.1.2.3 Searching for a Place of Interest by category .............................................................................. 35
3.1.2.4 Searching for a Place of Interest by name ..................................................................................... 38
3.1.3 Searching for a Place using Google Local Search ................................................................41
3.1.4 Selecting a map location as the destination ..........................................................................42
3.1.5 Selecting the destination from your Favorites ......................................................................44
3.1.6 Selecting a recent destination from the History ....................................................................45
3.1.7 Entering the coordinate of the destination ............................................................................46
3.2 Checking route parameters and accessing route related functions ...............................48
3.3 Modifying the route ........................................................................................................49
3.3.1 Selecting a new destination when already having a route:
New Route, Waypoint or Final Destination ...........................................................................49
3.3.2 Editing the list of destinations (Edit Route) ..........................................................................50
3.3.3 Checking route alternatives when planning the route ...........................................................51
3
NAV-6AVUAEA.indb 3
2013/07/31 10:51:30
3.3.4 Checking route alternatives for an existing route .................................................................52
3.3.5 Changing the road types used in route planning ...................................................................53
3.4 Saving a location as a Favorite destination ..................................................................54
3.4.1 Editing the details of a Favorite destination .........................................................................54
4 Reference Guide ..................................................................................................... 55
4.1 Concepts ........................................................................................................................55
4.1.1 Smart Zoom ..........................................................................................................................55
4.1.2 Route calculation and recalculation ......................................................................................55
4.1.3 Road safety cameras and other proximity alert points ...........................................................56
4.1.4 Speed limit warning ...............................................................................................................57
4.1.5 Traffic information in route planning ....................................................................................57
4.1.5.1 Historical traffic ............................................................................................................................ 57
4.1.5.2 Online traffic information ............................................................................................................. 58
4.2 Settings menu .................................................................................................................59
4.2.1 Sound and Warnings .............................................................................................................60
4.2.2 Traffic settings .......................................................................................................................62
4.2.3 Route settings ........................................................................................................................63
4.2.4 Map settings ..........................................................................................................................64
4.2.5 Visual guidance settings ........................................................................................................65
4.2.6 Connected Settings ...............................................................................................................65
5 Wi-Fi™ ................................................................................................................... 67
5.1 What is Wi-Fi™*? ..........................................................................................................67
5.2 Connecting to Wi-Fi™ ...................................................................................................68
5.2.1 Turning Wi-Fi™ on................................................................................................................68
5.2.2 Adding a network ...................................................................................................................68
5.2.3 Stopping connection to network ............................................................................................69
6 Glossary ................................................................................................................. 70
7 End-User Terms...................................................................................................... 72
4
NAV-6AVUAEA.indb 4
2013/07/31 10:51:30
NAV-6AVUAE.indb 5
2013/05/07 18:21:40
1 Warnings and Safety information
The navigation system helps you find your way to your destination with the built-in GPS
receiver. The navigation system does not transmit your GPS position; others cannot track you.
If you accept it when first using the application, the navigation system collects usage
information and GPS logs that may be used for improving the application and the quality
and coverage of maps. The data is processed anonymously; no one will be able to track any
personal information.
It is important that you look at the display only when it is safe to do so. If you are the
driver of the vehicle, we recommend that you operate the navigation system before you
start your journey. Plan the route before your departure and stop if you need to change
the route.
You must obey the traffic signs and follow the road geometry. If you deviate from the
recommended route, the navigation system changes the instructions accordingly.
For more information, consult the End-User Terms (page 72).
6
NAV-6AVUAEA.indb 6
2013/07/31 10:51:30
2 Getting started
2.1 Navigation menu
You can reach all parts of the navigation system from the Navigation menu.
The navigation menu opens when the map screen is selected using the commander switch.
You have the following options:
•
: Open/close
Opens and closes the UMP (menu bar).
The UMP (menu bar) is displayed on the lower part of the screen.
Hides the displayed UMP if the UMP has been displayed.
•
: Switches to the navigation information screen on which items such as traffic
information, GPS reception conditions, the vehicle position, or gas prices (while service is
in use) can be set/verified.
•
: Cancels way point/route
•
: Adds a destination.
Select your destination by entering an address or selecting a place of interest, a location
on the map or one of your Favorite destinations. You can also look up your recent
destinations from the Smart History, enter a coordinate or use the location saved in a
photo. When an Internet connection is available, Google Local Search can be of further
help to find your destination.
•
: Finds Places nearby
POIs (point of interest) around the vehicle position can be searched.
•
: Displays the route parameters and the route in its full length on the map. You can also
perform route-related actions such as editing or canceling your route, setting a start point
for the route, picking route alternatives, avoiding parts of the route, simulating navigation
or adding the destination to your Favorites.
•
: Changes View mode
The map mode (2D north up/2D heading up/3D) can be changed.
•
: Switches to the Settings screen where you change navigation settings.
7
NAV-6AVUAEA.indb 7
2013/07/31 10:51:30
2.2 Buttons and other controls on the screen
2.2.1 Using keyboards
You only need to enter letters or numbers when you cannot avoid it. You can type with your
fingertips on the full-screen keyboards and you can switch between various keyboard layouts,
for example English, Greek or numerical.
Task
Instruction
Correcting your entry on the
keyboard
to remove the unneeded character(s). Select and
Select
hold the button to delete several characters or the entire input
string.
Entering a space, for
example between a first
name and a family name or
in multi-word street names
Select the
Entering upper and lower
case letters
When entering a text, the first character appears in upper case
while the rest of the text is in lower case. Select
to enter
button at the bottom center of the screen.
an upper case letter or select twice to turn on Caps Lock.
Select again and lower case letters return.
Finalizing the keyboard entry Select
•
•
•
Canceling the keyboard
entry (returning to the
previous screen)
.
accepting the suggested search result
opening the list of search results
saving your input
Select
.
8
NAV-6AVUAEA.indb 8
2013/07/31 10:51:30
2.2.2 Press and Hold
You usually need to select the screen only once, however, some useful features can be
accessed with combined touch screen selecting. Those are as follows:
Action
Select and hold the
screen
Details
Select and keep pressing the following buttons to perform extra
functions:
•
•
Select and hold any of the
,
,
,
,
, and
buttons on the Map screen: you can rotate, tilt or scale the map
continuously.
Select and hold
on keyboard screens: you can delete
several characters quickly.
9
NAV-6AVUAEA.indb 9
2013/07/31 10:51:30
2.3 Map screen
2.3.1 Navigating on the map
The data fields are different when you are navigating an active route and when you have no
specified destination (the orange line is not displayed).
Default data fields when cruising without a destination (select and hold any of the fields to
change its value):
Field
Description
Shows the speed limit of the current road if the map contains it.
Default data fields when navigating a route (select and hold any of the fields to change its
value):
Field
Description
Shows the distance you need to travel on the route before
reaching your final destination.
Shows the estimated arrival time at the final destination of the
route based on information available for the remaining segments
of the route.
If [DEVICE] is capable of receiving live traffic information, the
calculation takes into account traffic delays affecting your route if
they are received. However, this calculation is rarely accurate.
Historical traffic data can also be taken into account if data is
available.
10
NAV-6AVUAE.indb 10
2013/05/07 18:21:40
2.3.2 Position markers
2.3.2.1 Selected map location (Cursor) and selected map object
You can mark a map location in the following ways:
•
Select a location on the map when navigating,
•
Select the location when you are asked to confirm the destination at the end of a search,
or
•
Select the location in Find on Map (page 42)
When a map location is selected, the Cursor appears at the selected point on the map. The
Cursor is displayed with a radiating red dot ( ) to make it visible at all zoom levels.
The location of the Cursor can be used as the destination of the route, or a new alert point.
You can search for Places around this location, or you can save it as one of your Favorite
destinations.
You can also select some of the objects on the map. If you select the map at the icon of a Place
of Interest or an alert point, the object will be selected (you will see a red circling border around
the object). You can then get information about this object or use it as a route point.
2.3.3 Objects on the map
2.3.3.1 Streets and roads
The navigation system shows the roads in different widths and colors so that they can be easily
identified. A highway/freeway will be thicker and a different color than a small street.
11
NAV-6AVUAEA.indb 11
2013/07/31 10:51:31
2.3.3.2 Turn preview and Next street
When navigating a route, the top section of the Map screen shows information about the next
maneuver, street or city/town.
There is a field in the top left corner that displays the next maneuver. Both the type of maneuver
(turn, roundabout, exiting highway/freeway, etc.) and its distance from the current position are
displayed.
A smaller icon shows the type of the second next maneuver if it is near the first one. Otherwise,
only the next maneuver is displayed.
Most of these icons are very intuitive. The following table lists some of the frequently shown
maneuver. The same symbols are used in both fields:
Icon
Description
Turn left.
Turn right.
Turn back.
Bear right.
Turn sharp left.
Keep left.
Continue straight in the intersection.
Go left on the roundabout, 3rd exit (next
maneuver).
12
NAV-6AVUAEA.indb 12
2013/07/31 10:51:31
Enter highway/freeway.
Exit highway/freeway.
Board ferry.
Leave ferry.
Approaching a waypoint.
Approaching the destination.
2.3.3.3 Lane information and Signposts
When navigating on multilane roads, it is important to take the appropriate lane in order to
follow the recommended route. If lane information is available in the map data, the navigation
system displays the lanes and their directions using small arrows at the bottom of the map.
Highlighted arrows represent the lanes and direction you need to take.
Where additional information is available, signposts substitute arrows. Signposts are displayed
at the top of the map. The color and style of the signposts are similar to the real ones you see
above road or by the roadside. They show the available destinations and the number of the
road the lane leads to.
All signposts look similar when cruising (when there is no recommended route). When
navigating a route, only the signpost that points to the lane(s) to be taken is displayed in bright
colors; all others are darker.
If you want to hide the currently displayed signposts, select any of them and the normal Map
screen returns until new signpost information is received.
13
NAV-6AVUAEA.indb 13
2013/07/31 10:51:31
2.3.3.4 Junction view
If you are approaching a highway/freeway exit or a complex intersection and the needed
information exists, the map is replaced with a 3D view of the junction. The lanes you need
to take are displayed with arrows. At the top of the screen road signs show you additional
information.
If you want to hide the currently displayed junction, select the picture and the Map screen
returns.
There are two kinds of Junction Views:
Where Provider Junction Views are not available but the necessary information exists, Generic
Junction Views show a generic view of the junction with focus on the number and layout of
lanes only. The road signs are created from highway/interstate shields (route markers), route
numbers and destination information received in the map data:
2.3.3.5 Highway/Freeway exit services
You may need a service station or a restaurant during your journey. This feature displays a new
button on the map when you are driving on highways/freeways.
Select this button to open a panel with the details of the next few exits or service stations.
Applicable only when the setting is “Only when menu is open”.
Select any of them to display the exit area on the map. You can now easily add this exit as a
waypoint to your route if needed.
If you want to display other types of Places for the exits, you can change the icons in Visual
Guidance settings (page 65).
14
NAV-6AVUAEA.indb 14
2013/07/31 10:51:31
2.3.3.6 Elements of the active route
The navigation system shows the route in the following way:
Symbol
Name
Current GPS position and
Start point
Description
Your current position displayed on the map.
•
If roads are near, the symbol is snapped
onto the nearest road.
Normally if GPS position is available, the route
starts from the current position. If there is no
valid GPS position, the navigation system uses
the last known position as the start point.
Waypoint (intermediate
destination)
An intermediate destination of the route before
reaching the final destination.
Destination (end point)
The final destination of the route.
Route color
The route always stands out with its color on the
map, both in daytime and in nighttime mode.
Streets and roads that are
You can choose whether you want to use or
excluded from the navigation avoid certain road types (page 63). However,
when the navigation system cannot avoid such
roads, the route will include them and it will
show them in a color that is different from the
route color.
Streets and roads that are
affected by traffic events
Road segments may be affected by traffic
events received. These streets and roads
are displayed in an alternate color, and small
symbols displayed along the route show the
type of traffic event.
15
NAV-6AVUAEA.indb 15
2013/07/31 10:51:31
2.3.4 Manipulating the map
Select the map anywhere to browse it during navigation. The map stops following the current
position (the vehicle marker, a blue arrow by default, is not locked in a fix position on the screen
any more) and control buttons appear to help you modify the map view.
Action
Moving the map
with drag&drop
Button(s)
No buttons
Zooming in and out
,
Description
You can move the map in any direction: select
and hold the map, and move your finger towards
the direction you want to move the map.
Changes how much of the map is displayed on
the screen.
The navigation system uses high-quality vector
maps that let you examine the map at various
zoom levels, always with optimized content. It
always displays street names and other text with
the same font size, never upside-down, and you
only see the streets and objects that you need.
Map scaling has a limit in 3D map view mode.
If you zoom out further, the map switches to 2D
view mode.
Select the button once to modify the view in large
steps, or select and hold the button to modify it
continuously and smoothly.
Tilting up and down
,
Changes the vertical view angle of the map in 3D
mode.
Select the button once to modify the view in large
steps, or select and hold the button to modify it
continuously and smoothly.
Rotating left and
right
Changes the horizontal view angle of the map.
,
Select the button once to modify the view in large
steps, or select and hold the button to modify it
continuously and smoothly.
2D or 3D view
Select this button to switch between the 3D
perspective and 2D top-down map view modes.
Compass in 2D
map view mode
The direction of the compass shows North.
Select the button to switch to North-up view,
and then select again to rotate the map in the
previous direction.
16
NAV-6AVUAEA.indb 16
2013/07/31 10:51:31
Compass in 3D
map view mode
The direction of the compass shows North.
Select the button to switch to North-up view,
and then select again to rotate the map in the
previous direction.
Return to normal
navigation
Select this button to move the map back to follow
the current GPS position. Automatic map rotation
is also re-enabled.
The map manipulation buttons disappear and
navigation continues.
Select destination
Select this button to select the Cursor as a new
destination. The route is automatically calculated.
Open/close
The UMP (menu bar) is displayed on the lower
part of the screen.
Hides the displayed UMP if the UMP has been
displayed.
Rotate mode
Zooming in/out maps, 3D view operation, and
map rotating can be done on the drag mode
screen (map reference screen).
17
NAV-6AVUAEA.indb 17
2013/07/31 10:51:31
2.3.5 Checking the details of the current position (Where Am I?)
This screen contains information about the current position (or about the last known position if
GPS reception is not available) and a button to search for useful Places nearby.
You can access this screen from the map in one of the following ways:
•
If the current street is displayed below the vehicle marker (the current position on the
map), select it to open the Where Am I? screen.
18
NAV-6AVUAEA.indb 18
2013/07/31 10:51:31
19
NAV-6AVUAEA.indb 19
2013/07/31 10:51:31
3 On-road navigation
When first started, the navigation system calculates routes using the road network of the high
quality vector maps provided with the product.
You can set up your route in different ways:
•
If you need a route for immediate navigation, you can select the destination and start
navigating to it right away (normal navigation).
•
You can also plan a route independently of your current GPS position or even without
GPS reception. To achieve this you need to set a new starting point in My Route / Edit
Route by selecting the flag icon at the current position. This will also turn off the GPS
receiver so that the route is not recalculated when a new position is received.
You can plan routes with multiple destinations. Select the first destination. Then select a
second destination and add it to your route to create a multi-point route. You can add as many
destinations to your route as you like.
3.1 Selecting the destination of a route
The navigation system offers you several ways of choosing your destination:
•
Enter a full address or a part of an address (page 21).
•
Enter an address with postal code (page 29).
•
Select a Place of Interest from a database as your destination (page 32).
•
Select a location on the map with the Find on Map feature (page 42).
•
Use a previously saved Favorite destination (page 44).
•
Select a location from the History of previously used destinations (page 45).
•
Enter the coordinate of the destination (page 46).
20
NAV-6AVUAEA.indb 20
2013/07/31 10:51:31
3.1.1 Entering an address or a part of the address
If you know at least a part of the address, it is the quickest way to select the destination of the
route.
Using the same screen, you can find an address by entering:
•
the exact address, including house number
•
the center of a city/town
•
an intersection
•
the midpoint of a street
•
any of the above, starting the search with the postal code (page 29)
3.1.1.1 Entering an address
To enter an address as the destination, do as follows:
1. In the Navigation menu, select
.
.
2. Select
3. By default, the navigation system proposes the country and city/town where you are.
, enter the first few letters of the country name on the keyboard,
If needed, select
and select one country from the list of results.
4. If needed, select a new city/town:
a.
Select
b.
Start entering the name of the city/town on the keyboard.
c.
Find the city/town you need:
.
•
The most likely city/town name is always shown in the input field. To accept
it, select .
•
If the desired name does not show up, the names that match the string
appear in a list after entering a couple of characters (to open the list of
). Select the city/town
results before it appears automatically, select
from the list.
21
NAV-6AVUAEA.indb 21
2013/07/31 10:51:31
5. Enter the street name:
a.
Select
b.
Start entering the street name on the keyboard.
c.
Find the street you need:
.
•
The most likely street name is always shown in the input field. To accept it,
select .
•
If the desired name does not show up, the names that match the string
appear in a list after entering a couple of characters (to open the list of
). Select the street
results before it appears automatically, select
from the list.
6. Enter the house number:
a.
Select
b.
Enter the house number on the keyboard. (To enter letters, select
c.
to finish entering the address. (If the entered house number cannot be
Select
found, the midpoint of the street is selected as the destination.)
.
).
7. Transitions to the screen where the input location can be checked.
Transitions to the next screen by selecting
, and returns to the previous screen
button. The input location can be changed by selecting MAP.
by selecting the
•
Note!
•
: POIs (point of interest) around the selected location
can be searched.
: The selected location can be registered to
Favorites.
22
NAV-6AVUAE.indb 22
2013/05/07 18:21:42
8. If
is selected or it is not operated for a continuous 10 seconds, the route
guidance is started.
The set route can be checked by selecting MAP.
The route can be edited by selecting other options.
Note!
3.1.1.2 Entering the midpoint of a street as the destination
You can navigate to the midpoint of a street if the house number is not available:
1. In the Navigation menu, select
2. Select
.
.
3. If necessary, modify the country and city/town as described earlier (page 21).
4. Enter the street name:
.
a.
Select
b.
Start entering the street name on the keyboard.
c.
Find the street you need:
•
The most likely street name is always shown in the input field. To accept it,
select .
•
If the desired name does not show up, the names that match the string
appear in a list after entering a couple of characters (to open the list of
). Select the street
results before it appears automatically, select
from the list.
23
NAV-6AVUAEA.indb 23
2013/07/31 10:51:32
5. Instead of entering the house number, select
street is selected as the destination.
. The midpoint of the
6. Transitions to the screen where the input location can be checked.
, and returns to the previous screen
Transitions to the next screen by selecting
button. The input location can be changed by selecting MAP.
by selecting the
•
Note!
•
: POIs (point of interest) around the selected location
can be searched.
: The selected location can be registered to
Favorites.
is selected or it is not operated for a continuous 10 seconds, the route
7. If
guidance is started.
The set route can be checked by selecting MAP.
Note!
The route can be edited by selecting other options.
24
NAV-6AVUAEA.indb 24
2013/07/31 10:51:32
3.1.1.3 Selecting an intersection as the destination
To enter an address as the destination, do as follows:
1. In the Navigation menu, select
2. Select
.
.
3. If necessary, modify the country and city/town as described earlier (page 21).
4. Enter the street name:
a.
Select
b.
Start entering the street name on the keyboard.
c.
Find the street you need:
.
•
The most likely street name is always shown in the input field. To accept it,
select .
•
If the desired name does not show up, the names that match the string
appear in a list after entering a couple of characters (to open the list of
). Select the street
results before it appears automatically, select
from the list.
5. Enter the intersecting street name:
1.
Select
.
•
If only a few intersecting streets exist, their list appears immediately.
•
In case of a longer street, the keyboard screen appears. Start entering
the name of the intersecting street on the keyboard. As soon as the street
names that match the entered string can be shown on one screen, their list
appears automatically. Select the street from the list.
25
NAV-6AVUAEA.indb 25
2013/07/31 10:51:32
6. Transitions to the screen where the input location can be checked.
, and returns to the previous screen
Transitions to the next screen by selecting
button. The input location can be changed by selecting MAP.
by selecting the
•
Note!
•
: POIs (point of interest) around the selected location
can be searched.
: The selected location can be registered to
Favorites.
is selected or it is not operated for a continuous 10 seconds, the route
7. If
guidance is started.
The set route can be checked by selecting MAP.
Note!
The route can be edited by selecting other options.
26
NAV-6AVUAEA.indb 26
2013/07/31 10:51:32
3.1.1.4 Selecting a city/town center as the destination
The city/town center is not the geometric center of the city/town but an arbitrary point on
the map the creators have chosen. In towns and villages, it is usually the most important
intersection; in larger cities, it is one of the important intersections.
1. In the Navigation menu, select
2. Select
.
.
3. If necessary, modify the country and city/town as described earlier (page 21).
4. Enter the street name:
.
a.
Select
b.
Start entering the street name on the keyboard.
c.
Find the street you need:
•
The most likely street name is always shown in the input field. To accept it,
select .
•
If the desired name does not show up, the names that match the string
appear in a list after entering a couple of characters (to open the list of
). Select the street
results before it appears automatically, select
from the list.
5. Instead of entering the street name, select
. This way the center of the
displayed city/town becomes the destination of the route.
27
NAV-6AVUAEA.indb 27
2013/07/31 10:51:32
6. Transitions to the screen where the input location can be checked.
, and returns to the previous screen
Transitions to the next screen by selecting
button. The input location can be changed by selecting MAP.
by selecting the
•
Note!
•
: POIs (point of interest) around the selected location
can be searched.
: The selected location can be registered to
Favorites.
is selected or it is not operated for a continuous 10 seconds, the route
7. If
guidance is started.
The set route can be checked by selecting MAP.
Note!
The route can be edited by selecting other options.
28
NAV-6AVUAEA.indb 28
2013/07/31 10:51:32
3.1.1.5 Entering an address with a postal code
1. In the Navigation menu, select
.
.
2. Select
3. If necessary, modify the country and city/town as described earlier (page 21).
4. Enter the street name:
.
a.
Select
b.
Start entering the street name on the keyboard.
c.
Find the street you need:
•
The most likely street name is always shown in the input field. To accept it,
select .
•
If the desired name does not show up, the names that match the string
appear in a list after entering a couple of characters (to open the list of
). Select the street
results before it appears automatically, select
from the list.
5. Enter a new city/town using its postal code:
a.
Select
b.
Select
.
to open the numeric keypad.
c.
Start entering the postal code.
d.
Find the city/town you need:
•
The most likely postal code is always shown in the input field. To accept it,
select .
•
If the desired number does not show up, open the list of results by
. Select the postal code from the list.
selecting
29
NAV-6AVUAEA.indb 29
2013/07/31 10:51:32
6. Enter the street name:
.
a.
Select
b.
Start entering the street name on the keyboard.
c.
Find the street you need:
•
The most likely street name is always shown in the input field. To accept it,
select .
•
If the desired name does not show up, the names that match the string
appear in a list after entering a couple of characters (to open the list of
). Select the street
results before it appears automatically, select
from the list.
7. Enter the house number:
.
a.
Select
b.
Enter the house number on the keyboard. (To enter letters, select
c.
to finish entering the address. (If the entered house number cannot be
Select
found, the midpoint of the street is selected as the destination.)
.)
8. Transitions to the screen where the input location can be checked.
Transitions to the next screen by selecting
, and returns to the previous screen
button. The input location can be changed by selecting MAP.
by selecting the
•
Note!
•
: POIs (point of interest) around the selected location
can be searched.
: The selected location can be registered to
Favorites.
30
NAV-6AVUAE.indb 30
2013/05/07 18:21:44
9. If
is selected or it is not operated for a continuous 10 seconds, the route
guidance is started.
The set route can be checked by selecting MAP.
Note!
The route can be edited by selecting other options.
31
NAV-6AVUAEA.indb 31
2013/07/31 10:51:33
3.1.2 Selecting the destination from the Places of Interest
You can select your destination from the Places of Interest included with the navigation system.
Using the same screen, you can find a Place in different ways:
•
you can quickly find a nearby Place by its name with the Quick search feature
•
you can find frequently searched types of Places with only a few screen selects with the
Preset search feature
•
you can search for a Place by its category
•
you can search for a Place by its name
In addition, you can search for special services from the 'Where Am I?' screen.
3.1.2.1 Quick search for a Place of Interest
The Quick search feature lets you quickly find a Place by its name. The search is always
carried out
•
along the recommended route if it exists or
•
around your current location if there is no destination given.
Start the Quick search function:
1. In the Navigation menu, select
2. Select
.
3. Select
.
.
4. Using the keyboard, start entering the name of the Place.
32
NAV-6AVUAEA.indb 32
2013/07/31 10:51:33
5. After entering a few letters, select
to open the list of Places with names
containing the entered character sequence.
6. Transitions to the screen where the input location can be checked.
, and returns to the previous screen
Transitions to the next screen by selecting
button. The input location can be changed by selecting MAP.
by selecting the
•
Note!
•
: POIs (point of interest) around the selected location
can be searched.
: The selected location can be registered to
Favorites.
is selected or it is not operated for a continuous 10 seconds, the route
7. If
guidance is started.
The set route can be checked by selecting MAP.
Note!
The route can be edited by selecting other options.
33
NAV-6AVUAEA.indb 33
2013/07/31 10:51:33
3.1.2.2 Searching for a Help nearby
The Preset search feature lets you quickly find the most frequently selected types of Places.
1. If you are on the Map screen, select
2. In the Navigation menu, select
to return to the Navigation menu.
.
3. Preset search categories appear, all for searching around the current position (or
around the last known position if the current position is not available):
•
: Displays the POI (point of interest) list concerning vehicle repair shops.
•
: Displays the POI list of hospitals.
•
: Displays the POI list of police stations.
•
: Displays the POI list of fire stations.
4. Select any of the quick search buttons to get an instant list of Places.
5. Transitions to the screen where the input location can be checked.
, and returns to the previous screen
Transitions to the next screen by selecting
button. The input location can be changed by selecting MAP.
by selecting the
•
Note!
•
: POIs (point of interest) around the selected location
can be searched.
: The selected location can be registered to
Favorites.
34
NAV-6AVUAEA.indb 34
2013/07/31 10:51:33
6. If
is selected or it is not operated for a continuous 10 seconds, the route
guidance is started.
The set route can be checked by selecting MAP.
The route can be edited by selecting other options.
Note!
3.1.2.3 Searching for a Place of Interest by category
You can search for Places of Interest by their categories and subcategories.
1. In the Navigation menu, select
2. Select
.
3. Select
.
.
4. Select the area around which the Place should be searched for:
•
to search around the current position or if it is not available,
Select
around the last know position. (The result list will be ordered by the distance
from this position.)
•
Select
to search for a place within a selected city/town. (The result list
will be ordered by the distance from the center of the selected city/town.)
•
Select
to search for a place around the destination
of the active route. (The result list will be ordered by the distance from the
destination.)
•
to search along the active route, and not around a given
Select
point. This is useful when you search for a later stopover that results in a
minimal detour only, such as searching for upcoming gasoline stations or
restaurants. (The result list will be ordered by the length of the necessary
detour.)
35
NAV-6AVUAEA.indb 35
2013/07/31 10:51:33
5. (optional) If you have selected
, select the city/town to search in.
6. Select one of the main Place categories (e.g. Accommodation) or select
to list all Places around the selected location or along the route.
7. Select one of the Place subcategories (e.g. Hotel or Motel) or select
to
list all Places in the selected main category around the selected location or along the
route.
8. Sometimes the list of brands in the selected Place subcategory appears. Select one
to list all Places in the selected subcategory around the
brand or select
selected location or along the route.
9. Finally, the results appear in a list.
36
NAV-6AVUAE.indb 36
2013/05/07 18:21:45
10. Transitions to the screen where the input location can be checked.
, and returns to the previous screen
Transitions to the next screen by selecting
button. The input location can be changed by selecting MAP.
by selecting the
•
Note!
•
: POIs (point of interest) around the selected location
can be searched.
: The selected location can be registered to
Favorites.
is selected or it is not operated for a continuous 10 seconds, the route
11. If
guidance is started.
The set route can be checked by selecting MAP.
Note!
The route can be edited by selecting other options.
37
NAV-6AVUAEA.indb 37
2013/07/31 10:51:34
3.1.2.4 Searching for a Place of Interest by name
You can search for Places of Interest by their names. You can search around different locations
or along your route in the whole Place database or in one Place category or subcategory only.
1. In the Navigation menu, select
2. Select
.
3. Select
.
.
4. Select the area around which the Place should be searched for:
•
to search around the current position or if it is not available,
Select
around the last know position. (The result list will be ordered by the distance
from this position.)
•
to search for a place within a selected city/town. (The result list
Select
will be ordered by the distance from the center of the selected city/town.)
•
Select
to search for a place around the destination
of the active route. (The result list will be ordered by the distance from the
destination.)
•
Select
to search along the active route, and not around a given
point. This is useful when you search for a later stopover that results in a
minimal detour only, such as searching for upcoming gasoline stations or
restaurants. (The result list will be ordered by the length of the necessary
detour.)
5. (optional) If you have selected
, select the city/town to search in.
6. Select one of the main Place categories (e.g. Accommodation) to search in or select
to search among all Places.
38
NAV-6AVUAEA.indb 38
2013/07/31 10:51:34
7. Select one of the Place subcategories (e.g. Hotel or Motel) to search in or select
to search in the selected Place category.
8. Select
if you have not done it before.
9. Using the keyboard, start entering the name of the Place.
10. After entering a few letters, select
to open the list of Places with names
containing the entered character sequence.
39
NAV-6AVUAE.indb 39
2013/05/07 18:21:46
11. Transitions to the screen where the input location can be checked.
, and returns to the previous screen
Transitions to the next screen by selecting
button. The input location can be changed by selecting MAP.
by selecting the
•
Note!
•
: POIs (point of interest) around the selected location
can be searched.
: The selected location can be registered to
Favorites.
is selected or it is not operated for a continuous 10 seconds, the route
12. If
guidance is started.
The set route can be checked by selecting MAP.
Note!
The route can be edited by selecting other options.
40
NAV-6AVUAEA.indb 40
2013/07/31 10:51:34
3.1.3 Searching for a Place using Google Local Search
If you have an Internet connection, you can search for places with the Google Local Search
service.
1. If you are on the Map screen, select
from the Navigation menu.
.
2. Select
3. Using the keyboard, start entering the text to search for. This text can be a type of Place
(like “Hotel”), a type of goods you are looking for (like “Pizza” or “Vacuum cleaner”) or
even a street name followed by the city/town.
(optional) The local search is carried out around your current location. To search around
a different location, enter the name of the city/town after the word you are looking for.
You can enter up to 25 characters.
4. After entering the text, select
to open the list of results:
5. Transitions to the screen where the input location can be checked.
Transitions to the next screen by selecting
, and returns to the previous screen
button. The input location can be changed by selecting MAP.
by selecting the
•
Note!
•
: POIs (point of interest) around the selected location
can be searched.
: The selected location can be registered to
Favorites.
41
NAV-6AVUAEA.indb 41
2013/07/31 10:51:34
6. If
is selected or it is not operated for a continuous 10 seconds, the route
guidance is started.
The set route can be checked by selecting MAP.
The route can be edited by selecting other options.
Note!
3.1.4 Selecting a map location as the destination
1. Tilt the commander to the left or right, or up or down to switch to the drag mode screen
(map reference screen).
2. Move the cursor to the desired destination location and press down the commander to
display the menu.
3. Select
.
42
NAV-6AVUAEA.indb 42
2013/07/31 10:51:34
4. Transitions to the screen where the input location can be checked.
, and returns to the previous screen
Transitions to the next screen by selecting
button. The input location can be changed by selecting MAP.
by selecting the
•
Note!
•
: POIs (point of interest) around the selected location
can be searched.
: The selected location can be registered to
Favorites.
is selected or it is not operated for a continuous 10 seconds, the route
5. If
guidance is started.
The set route can be checked by selecting MAP.
Note!
The route can be edited by selecting other options.
43
NAV-6AVUAEA.indb 43
2013/07/31 10:51:35
3.1.5 Selecting the destination from your Favorites
1. If you are on the Map screen, select
from the Navigation menu.
2. In the Navigation menu, select
.
3. Transitions to the screen where the input location can be checked.
, and returns to the previous screen
Transitions to the next screen by selecting
button. The input location can be changed by selecting MAP.
by selecting the
•
Note!
•
: POIs (point of interest) around the selected location
can be searched.
: The selected location can be registered to
Favorites.
is selected or it is not operated for a continuous 10 seconds, the route
4. If
guidance is started.
The set route can be checked by selecting MAP.
Note!
The route can be edited by selecting other options.
44
NAV-6AVUAEA.indb 44
2013/07/31 10:51:35
3.1.6 Selecting a recent destination from the History
1. If you are on the Map screen, select
2. In the Navigation menu, select
from the Navigation menu.
.
3. The list of recent destinations appears. Smart History promotes three destinations to
the first page based on your previous routes (most likely destinations). The rest of the
destinations are ordered by time they were last selected. If necessary, scroll the list to
see earlier destinations.
4. Select a destination from the list.
5. Transitions to the screen where the input location can be checked.
, and returns to the previous screen
Transitions to the next screen by selecting
button. The input location can be changed by selecting MAP.
by selecting the
•
Note!
•
: POIs (point of interest) around the selected location
can be searched.
: The selected location can be registered to
Favorites.
45
NAV-6AVUAEA.indb 45
2013/07/31 10:51:35
6. If
is selected or it is not operated for a continuous 10 seconds, the route
guidance is started.
The set route can be checked by selecting MAP.
Note!
The route can be edited by selecting other options.
3.1.7 Entering the coordinate of the destination
You can also select a destination by entering its coordinate. Do as follows:
1. If you are on the Map screen, select
from the Navigation menu.
2. In the Navigation menu, select
3. Input map coordinate value of
4. When finished, select
.
and
.
.
46
NAV-6AVUAEA.indb 46
2013/07/31 10:51:35
5. Transitions to the screen where the input location can be checked.
, and returns to the previous screen
Transitions to the next screen by selecting
button. The input location can be changed by selecting MAP.
by selecting the
•
Note!
•
: POIs (point of interest) around the selected location
can be searched.
: The selected location can be registered to
Favorites.
is selected or it is not operated for a continuous 10 seconds, the route
6. If
guidance is started.
The set route can be checked by selecting MAP.
Note!
The route can be edited by selecting other options.
47
NAV-6AVUAEA.indb 47
2013/07/31 10:51:35
3.2 Checking route parameters and accessing route related functions
You can check different parameters of the route recommended by the navigation system.
1. If you are on the Map screen, select
to return to the Navigation menu.
2. The following pieces of information are displayed:
•
The name and/or address of the destination.
•
Warning icons (if any). They provide extra information about your route (e.g.
unpaved roads or toll roads to be taken).
•
The total time of the route.
•
The total length of the route.
•
Estimated delay calculated from traffic events on your route.
•
The route planning method (e.g. Fast).
3. You have the following options on this screen (for detailed instructions on how to use
them, see the next chapter):
•
Select
•
Select
•
Select
•
Select
to edit the route.
to display the entire route on the map.
to bypass a part of the route.
to delete the active route.
48
NAV-6AVUAEA.indb 48
2013/07/31 10:51:35
3.3 Modifying the route
When navigation is already started, there are several ways to modify the active route. The
following sections show some of those options.
3.3.1 Selecting a new destination when already having a route:
New Route, Waypoint or Final Destination
If you already have a recommended route and you select a new destination as described in the
above sections, the application will ask you whether to start a new route, add a new waypoint
(intermediate destination) to the route or append the newly selected destination at the end of
the current route.
•
Select
to plan a new route to the newly selected location. The previous
destination and waypoint(s) are deleted.
•
Select
to add the newly selected location as an intermediate destination to your
route. The other destinations of the route remain intact. Note: the new waypoint is placed
among destinations to keep the route optimal. To decide where a waypoint to appear, use
the Edit Route feature.
•
to append the newly selected destination at the end of the route.
Select
The other destinations of the route remain intact. The previous final destination is now the
last waypoint.
49
NAV-6AVUAE.indb 49
2013/05/07 18:21:49
3.3.2 Editing the list of destinations (Edit Route)
You can edit the route by modifying the list of destinations. You can add or remove destinations,
modify the start position or reorder the list.
1. If you are on the Map screen, select
to return to the Navigation menu.
.
2. Select
3. You have the following options:
•
Select
•
Select
to add a new destination.
to modify the start point of the route.
4. Select the route and display the menu.
: Close the menu.
: Advance the route order by one.
: Delete the selected route.
: Move back the route order by one.
50
NAV-6AVUAE.indb 50
2013/05/07 18:21:49
3.3.3 Checking route alternatives when planning the route
You can select from different route alternatives or change the route planning method after you
have selected a new destination.
1. If you are on the Map screen, select
2. Select
to return to the Navigation menu.
.
3. You see the basic details of three route alternatives with the selected route planning
method. Select any of them to see it on the map.
4. Details of a route can be checked by selecting
.
5. Select one of the route alternatives and select
to return to the previous screen.
The navigation system recalculates the route. The orange line now shows the new
recommended route.
51
NAV-6AVUAEA.indb 51
2013/07/31 10:51:36
3.3.4 Checking route alternatives for an existing route
To recalculate the active route with a different route planning method, you can modify the Route
settings (page 63). There is another way to do this and to compare different route alternatives
with the same route planning method.
1. If you are on the Map screen, select
2. In the Navigation menu, select
3. Select
to return to the Navigation menu.
.
.
4. You see the basic details of three route alternatives with the selected route planning
method. Select any of them to see it on the map.
5. Details of a route can be checked by selecting
.
6. Select one of the route alternatives then select and hold
for a few seconds to return
to the Map screen. The navigation system recalculates the route. The orange line now
shows the new recommended route.
52
NAV-6AVUAEA.indb 52
2013/07/31 10:51:36
3.3.5 Changing the road types used in route planning
To recalculate the active route with different road type preferences, do as follows. These
changes can also be made in Settings (page 63).
1. If you are on the Map screen, select
2. In the Navigation menu, select
to return to the Navigation menu.
.
3. Select any of the listed road types to modify the route. If needed, scroll the list for all
road types. You have the following options (their order depends on the selected vehicle
type):
•
- You might need to avoid highways/freeways if you have to drive
slowly or you are towing another vehicle.
•
- Charge roads are pay roads where you can purchase a pass
or vignette to use the road for a longer period of time. They can be enabled or
disabled separately from toll roads.
•
- The navigation system includes toll roads (pay roads where
there is a per-use charge) in the routes by default. If you disable toll roads, the
navigation system plans the best toll-free route.
•
- The navigation system includes ferries in a planned route by
default. However, a map does not necessarily contain information about the
accessibility of temporary ferries. You might also need to pay a fare on ferries.
- Setting in which routes with carpool lanes can be created or not
•
created.
•
- The navigation system excludes unpaved roads by default:
unpaved roads can be in a bad condition and usually you cannot reach the
speed limit on them.
4. The route has already been recalculated. Select
to return to the Map screen. The
orange line now shows the new recommended route.
53
NAV-6AVUAEA.indb 53
2013/07/31 10:51:36
3.4 Saving a location as a Favorite destination
You can add any location to Favorites, the list of frequently used destinations. Planning a route
to one of the Favorite destinations is described on page 44.
1. Select a destination as described before. It can be an address, a Place, any location on
the map, a previously used destination from History, etc.
2. A searched destination can be registered to Favorites by selecting
the verification screen of the destination search results.
on
3.4.1 Editing the details of a Favorite destination
You can select a location that you have already saved as a Favorite and edit its details.
Adding a location to the list of Favorite destinations is described on page 54.
1. Press down the Favorites button on the commander.
2. Select the Navigation tab.
3. The list of Favourite destinations is displayed.
The following functions can be used by selecting Add/Edit Communication Favorite.
Add Current Location: Set the current location to Favorites.
Add Current Destination: Register the current destination to Favorites.
Add from Contact: Register an address registered to the contacts list.
Move: Switch the Favorites order.
Delete: Delete the registered Favorites.
Your home address can be registered/changed by selecting Home.
The following functions can be used by selecting the registered Favorites.
Replace with Current Location: Set the current location to Favorites.
Replace with Current Destination: Register the current destination to Favorites.
Replace with Address from Contacts: Register an address registered to the contacts list.
Move: Switch the Favorites order.
Rename: Edit the registered Favorites name.
Delete: Delete the selected Favorites.
54
NAV-6AVUAEA.indb 54
2013/07/31 10:51:36
4 Reference Guide
4.1 Concepts
4.1.1 Smart Zoom
Smart Zoom provides much more than just a usual automatic zoom feature:
•
While following a route: when approaching a turn, it will zoom in and raise the view
angle to let you easily recognize your maneuver at the next junction. If the next turn is at
a distance, it will zoom out and lower the view angle to be flat so you can see the road in
front of you.
•
While driving without an active route: Smart Zoom will zoom in if you drive slowly and
zoom out when you drive at high speed.
4.1.2 Route calculation and recalculation
The navigation system calculates the route based on your preferences:
•
•
Route planning methods:
•
: Gives a quick route if you can travel at or near the speed limit on all
roads. Usually the best selection for fast and normal cars.
•
: Gives a route that has the smallest total distance of all possible routes.
It can be practical for slow vehicles.
•
: For vehicle types where Green routing is not available, this
method combines the benefits of Fast and Short: the navigation system
calculates as if it were calculating the Fast route, but it takes other roads as well
to save fuel.
•
: Results in a route with fewer turns and no difficult maneuvers. With this
option, you can make the navigation system take, for example, the highway/
freeway instead of a series of smaller roads or streets.
Road types used or avoided in route calculation:
•
•
•
•
•
Whenever data exist, route calculation takes into account statistical traffic data for the given
day of week and time of day (page 57).
Real-time Traffic events are also taken into account and sometimes greatly modify the route.
The navigation system automatically recalculates the route if you deviate from the proposed
itinerary or if a newly received Traffic event concerns a part of the recommended route.
For further information about Route settings, see page 63.
55
NAV-6AVUAEA.indb 55
2013/07/31 10:51:36
4.1.3 Road safety cameras and other proximity alert points
There is a special proximity warning for road safety cameras (like speed or red light cameras)
and other proximity alert points (like schools or railroad crossings). These alert points are not
part of the navigation system. You can download them from www.naviextras.com or you can
upload points in a specific text file if needed.
Dynamic alert points may also be available online at your location.
The application can warn you when you approach road safety cameras like speed cameras
or dangerous areas like school zones or railroad crossings. You can set up the different alert
types individually in Sound and Warning settings (page 60).
The following alert types are available:
•
Audio warning: beeps can be played (natural voice) or the type of the alert can be
announced (TTS) when you are approaching one of these points, and an extra alert can
warn you if you exceed the given speed limit while approaching.
•
Visual warning: the type of the alert point, its distance and the related speed limit appear
on the Map screen when you are approaching one of these cameras.
For some of the alert points, the enforced or expected speed limit is available. For these points,
the audio alert can be different if you are below or above the given speed limit.
•
Only when speeding: The audio alert is only played when you exceed the given speed
limit.
•
When approaching: The audio alert is always played when approaching one of these
alert points. In order to draw your attention, the alert can is different when you exceed the
speed limit.
Note!
The warning for road safety cameras is disabled when you are in a
country where road safety camera warning is prohibited. However, you
must ensure on your own liability that using this feature is legal in the
country where you intend to use it.
56
NAV-6AVUAEA.indb 56
2013/07/31 10:51:36
4.1.4 Speed limit warning
Maps may contain information about the speed limits of the road segments. The navigation
system is able to warn you if you exceed the current limit. This information may not be available
for your region (ask your local dealer), or may not be fully correct for all roads on the map.
The maximum speed set in the vehicle profile is also used for this warning. The navigation
system alerts you if you exceed the preset value even if the legal speed limit is higher.
Speed warning can be fine-tuned in Sound and Warning settings (page 60).
You can set the relative speed above which the application initiates the warning.
The following alert types are available:
•
Audio warning: you receive a verbal warning when you exceed the speed limit with the
given percentage.
•
Visual warning: the current speed limit is shown on the map when you exceed it (for
example: ).
You can also choose to see the speed limit sign on the map all the time.
4.1.5 Traffic information in route planning
The recommended route is not always the same between two points. Offline statistical traffic
information (historical speed information or traffic patterns) can be taken into account in the
route calculation based on the time of day and the day of week whenever suitable data exists.
In addition, real-time traffic information can help you avoid current traffic events like temporary
road closures or a traffic jam caused by an accident. Both functions are subject to data
availability.
You can display the historical traffic information on the map if you browse the map and select
this option from the More menu. A 2D map is displayed with road segments colored by the
density of the traffic in the given period. The current information is shown when you open the
screen. Modify the day of week and the time of day to see the desired period.
4.1.5.1 Historical traffic
If statistical traffic information is stored with the map data, the navigation system can take them
into account when planning a route. In normal cases, these statistics help you avoid usual
traffic jams on the given day of week in the given hour but in some cases like on public holidays
that fall on normal weekdays, they can be misleading. You can disable this feature in Traffic
settings (page 62).
You can display statistical traffic information on the map if you browse the map and select this
option from the More menu.
57
NAV-6AVUAEA.indb 57
2013/07/31 10:51:36
4.1.5.2 Online traffic information
Unlike statistical traffic information, online traffic can provide you with the real-time status of
the traffic. Route calculation can avoid road blocks or unexpected traffic jams caused by an
accident.
Note!
This feature needs an active Internet connection.
The application automatically takes into account the traffic events received. You do not need to
set anything in the program. When the navigation system receives traffic information that may
affect your route, the program will warn you that it is recalculating the route, and navigation will
continue with a new route that is optimal considering the most up-to-date traffic conditions.
To fine-tune this recalculation, you can set the minimum delay that can trigger a route
recalculation, or you can instruct the navigation system to have you confirm the new
recommended route before it takes effect. You can do these in Traffic settings (page 62).
) is displayed on the Map screen to show you whether traffic events
A special icon (
are received. The icon shows the status of the traffic receiver when there are no traffic events
on your route, otherwise it shows the type of next traffic event on your route.
Road segments affected by traffic events are displayed with an alternate color on the map, and
small symbols above the road show the nature of the event:
1. Select
to open the Traffic Summary screen:
2. Select
to open the list of event categories.
3. Select the traffic category you are interested in, or select
events:
to see the list of all
4. Now select any of the list items to see its details, and to display the affected road
segment in its full length on the map:
Note!
If there are traffic events on the recommended route that the application
has not bypassed, the
icon will open the list of significant
traffic events to let you quickly check them.
58
NAV-6AVUAEA.indb 58
2013/07/31 10:51:36
4.2 Settings menu
You can configure the program settings, and modify the behavior of the navigation system.
Select .
Button
Description
You can fine-tune the appearance of the Map screen. Adjust the map view
to your needs, choose suitable color themes from the list for both daytime
and nighttime use, change the blue arrow to a 3D car model, show or
suppress 3D buildings, turn track logging on or off, and manage Place
visibility settings (which Places to show on the map).
Adjust how the software helps you navigate with different kinds of route
related information on the Map screen.
A setting related to warnings is available.
Refer to Changing the road types used in route planning (page 53).
A setting for traffic information is available.
A setting for on-line service is available.
59
NAV-6AVUAEA.indb 59
2013/07/31 10:51:36
4.2.1 Sound and Warnings
Adjust the sound volume, mute your device or change the voice guidance language. In
addition, you can enable and set up different warnings and alerts.
Button
Description
Select this button to adjust the volume of the different sounds in the
application. A new screen shows the different sound types and their
controls. See below for details.
Maps may contain information about the speed limits of the road
segments. The navigation system is able to warn you if you exceed the
current limit. This information may not be available for your region (ask
your local dealer), or may not be fully correct for all roads in the map.
The maximum speed set in the vehicle profile is also used for this warning.
The navigation system alerts you if you exceed the preset value even if
the legal speed limit is higher.
This setting lets you decide whether you wish to receive visible and/or
audible warnings.
Adjust the slider to set the relative speed above which the application
initiates the warning.
The following alert types are available:
•
Audio warning: you receive a verbal warning when you exceed the
speed limit with the given percentage.
•
Visual warning: the current speed limit is shown on the map when
you exceed it.
If you prefer to see the speed limit sign on the map all the time (normally it
is shown only if your speed exceeds it), you can set it here.
The speed limit warning display can be changed.
: Displays only when going over the speed limit
: Constant display
60
NAV-6AVUAEA.indb 60
2013/07/31 10:51:37
This feature allows you to receive a warning when approaching a
Road Safety Camera or other alert points like school zones or railroad
crossings. You must ensure on your own liability that using this feature is
legal in the country where you intend to use it.
You can choose what alert point sources you want to use.
•
Community alert points can be uploaded to your device in every few
minutes if you have an Internet connection. This dynamic information
comes from navigation users like you. You have the possibility in the
application to report the alert points you find during your journeys.
•
Provider alert points can be updated dynamically like the community
alert points. These point are refreshed less frequently but they are
usually more accurate and reliable.
With an Internet connection you can also send information about
community alert points:
•
Report Alert Points: you can upload new alert points to the community
database.
•
Give Feedback: you can give feedback about an alert point to the
community.
You can set the alert for the different alert point categories individually.
The following alert types are available:
•
Audio warning: beeps can be played (natural voice) or the type of
the alert can be announced (TTS) while you are approaching one of
these points, and an extra alert can warn you if you exceed the given
speed limit while approaching.
•
Visual warning: the type of the alert point, its distance and the related
speed limit appear on the Map screen when you are approaching one
of these cameras.
For some of the alert points, the enforced or expected speed limit is
available. For these points, the audio alert can be different if you are
below or above the given speed limit.
•
Only when speeding: The audio alert is only played when you exceed
the given speed limit.
•
When approaching: The audio alert is always played when
approaching one of these alert points. In order to draw your attention,
the alert is different when you exceed the speed limit.
The speed camera warning setting can be changed.
: No display and sound
: Only display
: Both sound and display
61
NAV-6AVUAEA.indb 61
2013/07/31 10:51:37
4.2.2 Traffic settings
The recommended route is not always the same between two points. Whenever suitable data
exists, traffic information can be taken into account in the route calculation.
Button
Description
Use this switch to enable or disable historical traffic data and traffic
patterns. This locally stored information can be very useful in normal
circumstances but for example on public holidays it may be better to turn
off in order not to take into account normal weekday traffic jams.
Use this switch to enable or disable receiving real-time traffic information
online. The rest of the buttons below are all related to this real-time
information and are available only if receiving is enabled.
You can also define whether to receive online traffic via the 3G network or
only when connected to a WiFi network.
This setting determines how the navigation system uses the received realtime traffic information in route calculation. When calculating a new route,
or when recalculation becomes necessary based on the received Traffic
events, the navigation system avoids traffic events if it makes sense.
You can also set the minimum delay that triggers route recalculation, and
you can instruct the application if you want to confirm every recalculation.
When setting a route in consideration of traffic information, a time
setting is available which indicates the amount of possible time savings
obtainable by making a detour.
62
NAV-6AVUAEA.indb 62
2013/07/31 10:51:37
4.2.3 Route settings
These settings determine how routes will be calculated.
Button
Description
The route calculation can be optimized for different situations and vehicle
types by changing the planning method. See below for details.
To let the route fit your needs, you can also set which road types are to be considered for or to
be excluded from the route if possible.
Excluding a road type is a preference. It does not necessarily mean total prohibition. If your
destination can only be accessed using some of the excluded road types, they will be used but
only as much as necessary. In this case a warning icon will be shown on the My Route screen,
and the part of the route not matching your preference will be displayed in a different color on
the map.
In the list of road types you can see in how many segments and what total length of the road
type is used on the current route.
Button
Description
You might need to avoid highways/freeways when you are driving a slow
car or you are towing another vehicle.
Charge roads are pay roads where you can purchase a pass or vignette to
use the road for a longer period of time. They can be enabled or disabled
separately from toll roads.
The navigation system includes toll roads (pay roads where there is a
per-use charge) in the routes by default. If you disable toll roads, the
navigation system plans the best toll-free route.
The navigation system includes ferries in a planned route by default.
However, a map does not necessarily contain information about the
accessibility of temporary ferries. You might also need to pay a fare on
ferries.
Setting in which routes with carpool lanes can be created or not created.
The navigation system excludes unpaved roads by default: unpaved roads
can be in a bad condition and usually you cannot reach the speed limit on
them.
63
NAV-6AVUAEA.indb 63
2013/07/31 10:51:37
4.2.4 Map settings
You can fine-tune the appearance of the Map screen. Adjust the map view to your needs,
choose suitable color themes from the list for both daytime and night use, change the blue
arrow to a 3D car model, show or hide 3D buildings, turn track logging on or off, and manage
Place visibility sets (which Places to show on the map).
The map is always shown on the screen so that you can see the effect when you change a
setting.
Button
Description
Switch the map view between a 3D perspective view and a 2D top-down
view.
Adjust the basic zoom and tilt levels to your needs. Three levels are
available.
During route guidance while in 2D mode, the function which zooms in on
approaching intersections turns on/off automatically.
Show or suppress 3D city models, 3D artistic or block representation of
full city building data containing actual building size and position on the
map.
When selected, the map zooms out to show an overview of the
surrounding area if the next route event (maneuver) is far. When you get
close to the event, the normal map view returns.
Select which Places to show on the map while navigating. Too many
Places make the map crowded so it is a good idea too keep as few of
them on the map as possible. For this, you have the possibility to save
different Place visibility sets. You have the following possibilities:
•
Select the checkbox to show or hide the Place category.
•
Select the name of the Place category to open the list of its
subcategories.
64
NAV-6AVUAEA.indb 64
2013/07/31 10:51:37
4.2.5 Visual guidance settings
Adjust how the software helps you navigate with different kinds of route related information on
the Map screen.
Whenever adequate information is available, lane information similar to
the real ones on road signs above the road is displayed at the top of the
map. You can turn this feature on or off.
If you are approaching a highway/freeway exit or a complex intersection
and the needed information exists, the map is replaced with a 3D view of
the junction. You can turn this feature on or let the map be displayed for
the whole route.
When entering tunnels, the surface roads and buildings can be disturbing.
This feature shows a generic picture of a tunnel instead of the map. A topdown overview of the tunnel and remaining distance are also displayed.
4.2.6 Connected Settings
Sets the weather forecast data on/off.
Sets the traffic information data on/off.
65
NAV-6AVUAEA.indb 65
2013/07/31 10:51:37
66
NAV-6AVUAEA.indb 66
2013/07/31 10:51:37
5 Wi-Fi™
5.1 What is Wi-Fi™*?
Wi-Fi™ is the brand name which indicates the interconnection between IEEE 802.11
standardized devices and certified by Wi-Fi Alliance®. Wireless Internet access is possible
according to the surrounding environment (such as a mobile Wi-Fi™ router or a public Wi-Fi™
area).
By connecting the audio unit with a Wi-Fi™ compatible device, the Real Time Traffic function of
the navigation system can be used.
* Wi-Fi™, Wi-Fi Alliance®, and the logo are the trademark or registered trademark of
Wi-Fi Alliance®.
Supported standard
IEEE 802.11 b/g/n
Supported security type
None
WEP
WPA (WPA-Personal)
WPA2
WPA/WPA2 (WPA+AES&TKIP)
Note!
For enhanced communication safety, a WPA, WPA2, or WPA/WPA2
security type setting is recommended. Follow the security setting
procedure in the device's instruction manual.
67
NAV-6AVUAE.indb 67
2013/05/07 18:21:52
5.2 Connecting to Wi-Fi™
Connection is possible under conditions in which an Internet connection using Wi-Fi™ is
possible, and the Wi-Fi™ setting for the device is on.
5.2.1 Turning Wi-Fi™ on
1. Select the
icon on the home screen and display the Settings screen.
2. Select the
tab.
3. Select the
icon.
4. Turn the Wi-Fi™ setting on.
5. Available networks are displayed.
6. Select a desired network.
•
•
•
Note!
•
•
•
icon
When the connection to a Wi-Fi™ network is successful, the
is displayed.
If there is no available network when connecting to Wi-Fi™ for the
first time, you need to first add a network.
When entering in a network area previously connected to, reconnection to the network is automatic.
icon is displayed on the network name currently connected.
The
The network name and its security type, and the radio wave
reception level are displayed.
If the connection to a network is lost, connection to another available
network is automatic.
5.2.2 Adding a network
To connect to a network except for the public Wi-Fi™ area, a network needs to be added
manually. By adding the network, the security certification information of the network is
recorded, and automatic connection is possible when entering an available area. A maximum of
20 networks can be stored.
1. Turn on Wi-Fi™ if it is off.
icon.
2. Select the
icon. The keyboard screen is displayed.
3. Select the
4. Input a network name (SSID) and select the
5. Select the
icon.
icon.
6. Select a security type.
icon. The keyboard screen is displayed.
7. Select the
8. Input the password then select the
icon.
9. Select the
icon to connect to the network.
•
Note!
•
If “None” is selected during the security type selection, the password
cannot be input.
If 20 networks have already been stored and another network is
newly stored, the oldes network (oldest access) is deleted.
68
NAV-6AVUAE.indb 68
2013/05/07 18:21:52
Selecting a connecting network
1. Turn on Wi-Fi™ if it is off.
2. The available networks are displayed.
3. Select a desired network.
Note!
If a public Wi-Fi™ network is selected, password input may be required.
5.2.3 Stopping connection to network
1. Select the currently connected network.
2. Select the
icon.
69
NAV-6AVUAE.indb 69
2013/05/07 18:21:53
6 Glossary
2D/3D GPS reception
The GPS receiver uses satellite signals to calculate its (your) position and needs at least four
signals to give a three-dimensional position, including elevation. Because the satellites are
moving and because objects can block the signals, your GPS device might not receive four
signals. If three satellites are available, the receiver can calculate the horizontal GPS position
but the accuracy is lower and the GPS device does not give you elevation data: only 2D
reception is possible.
Active route
The currently navigated route. Whenever the destination is set, the route is active until you
delete it, reach your destination or you quit the navigation system. See also: Route.
City Center
The city/town center is not the geometric center of the city/town but an arbitrary point the map
creators have chosen. In towns and villages, it is usually the most important intersection; in
larger cities, it is one of the important intersections.
Color theme
The navigation system comes with different color themes for daytime or nighttime use of the
map and menu screens. Themes are custom graphic settings and they can have different
colors for streets, blocks or surface waters in 2D and 3D modes, and they display shades or
shadows in different ways in 3D mode.
One daytime scheme and one nighttime scheme is always selected for the map and for the menus.
The navigation system uses them when it switches from day to night and back.
GPS accuracy
Several factors have impact on the deviation between your real position and the one given by
the GPS device. For example, signal delay in the ionosphere or reflecting objects near the GPS
device have a different and varying impact on how accurately the GPS device can calculate
your position.
Map
The navigation system works with digital maps which are not simply the computerized versions
of traditional paper maps. Similarly to paper road maps, the 2D mode of digital maps show you
streets, roads, and elevation by colors.
In 3D mode, you can see the altitude differences, for example valleys and mountains, elevated
roads, and in selected cities 3D landmarks and 3D buildings are also displayed.
You can use digital maps interactively: you can zoom in and out (increase or decrease the
scale), you can tilt them up and down, and rotate them left and right. In GPS-supported
navigation, digital maps facilitate route planning.
70
NAV-6AVUAEA.indb 70
2013/07/31 10:51:37
North-up map orientation
In North-up mode the map is rotated so its top always faces North. This is the orientation for
example in Find on Map.
Road Safety Camera
Special alert points for speed, red light or bus lane cameras. Different data sources are
available. You can configure the navigation system to warn you when you approach one of
these cameras.
Detecting the location of Road Safety Cameras is prohibited in certain countries. It is the sole
responsibility of the driver to check whether this feature can be used during the trip.
The software is capable of showing and warning for more than just cameras. Various other
types of proximity alert points like school zones and railway crossings are also available.
Route
A sequence of maneuvers (for example, turns and roundabouts) to reach the destination. The
route contains one start point and one or more destinations. The start point is the current (or
last known) position by default. If you need to see a future route, the start point can be replaced
with any other given point.
Track-up map orientation
In Track-up mode the map is rotated so its top always points in the current driving direction.
This is the default orientation in 3D map view mode.
Vehicle marker
The current position is shown with a blue arrow on the map by default. The direction of the
blue arrow shows the current heading. This position marker can be replaced with different
3D vehicle symbols. You can even specify different Vehicle marker for different route types
(depending on which vehicle type is selected for route calculation).
71
NAV-6AVUAEA.indb 71
2013/07/31 10:51:37
7 End-User Terms
The data (“Data”) is provided for your personal, internal use only and not for resale. It is
protected by copyright, and is subject to the following terms and conditions which are agreed to
by you, on the one hand, and [CLIENT] (“[CLIENT]”) and its licensors (including their licensors
and suppliers) on the other hand.
© 200X NAVTEQ [Insert any applicable copyright notices as required for the country-specific
Data being used]. All rights reserved.
The Data for areas of Canada includes information taken with permission from Canadian
authorities, including: © Her Majesty the Queen in Right of Canada, © Queen's Printer for
Ontario, © Canada Post Corporation, GeoBase®, © Department of Natural Resources Canada.
NAVTEQ holds a non-exclusive license from the United States Postal Service® to publish and
sell ZIP+4® information.
©United States Postal Service® 200X. Prices are not established, controlled or approved by the
United States Postal Service®. The following trademarks and registrations are owned by the
USPS: United States Postal Service, USPS, and ZIP+4.
Terms and Conditions
Personal Use Only. You agree to use this Data together with [insert name of CLIENT’s
authorized Application] for the solely personal, non-commercial purposes for which you were
licensed, and not for service bureau, time-sharing or other similar purposes. Accordingly, but
subject to the restrictions set forth in the following paragraphs, you may copy this Data only as
necessary for your personal use to (i) view it, and (ii) save it, provided that you do not remove
any copyright notices that appear and do not modify the Data in any way. You agree not to
otherwise reproduce, copy, modify, decompile, disassemble, create any derivative works of, or
reverse engineer any portion of this Data, and may not transfer or distribute it in any form, for
any purpose, except to the extent permitted by mandatory laws.
Restrictions. Except where you have been specifically licensed to do so by [CLIENT], and
without limiting the preceding paragraph, you may not (a) use this Data with any products,
systems, or applications installed or otherwise connected to or in communication with vehicles,
capable of vehicle navigation, positioning, dispatch, real time route guidance, fleet management
or similar applications; or (b) with or in communication with any positioning devices or any
mobile or wireless-connected electronic or computer devices, including without limitation
cellular phones, palmtop and handheld computers, pagers, and personal digital assistants or
PDAs.
Warning. The Data may contain inaccurate or incomplete information due to the passage
of time, changing circumstances, sources used and the nature of collecting comprehensive
geographic data, any of which may lead to incorrect results.
No Warranty. This Data is provided to you “as is,” and you agree to use it at your own
risk. [CLIENT] and its licensors (and their licensors and suppliers) make no guarantees,
representations or warranties of any kind, express or implied, arising by law or otherwise,
including but not limited to, content, quality, accuracy, completeness, effectiveness, reliability,
fitness for a particular purpose, usefulness, use or results to be obtained from this Data, or that
the Data or server will be uninterrupted or error-free.
72
NAV-6AVUAE.indb 72
2013/05/07 18:21:53
Disclaimer of Warranty: [CLIENT] AND ITS LICENSORS (INCLUDING THEIR LICENSORS
AND SUPPLIERS) DISCLAIM ANY WARRANTIES, EXPRESS OR IMPLIED, OF QUALITY,
PERFORMANCE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR
NON-INFRINGEMENT. Some States, Territories and Countries do not allow certain warranty
exclusions, so to that extent the above exclusion may not apply to you.
Disclaimer of Liability: [CLIENT] AND ITS LICENSORS (INCLUDING THEIR LICENSORS AND
SUPPLIERS) SHALL NOT BE LIABLE TO YOU: IN RESPECT OF ANY CLAIM, DEMAND
OR ACTION, IRRESPECTIVE OF THE NATURE OF THE CAUSE OF THE CLAIM, DEMAND
OR ACTION ALLEGING ANY LOSS, INJURY OR DAMAGES, DIRECT OR INDIRECT,
WHICH MAY RESULT FROM THE USE OR POSSESSION OF THE INFORMATION; OR
FOR ANY LOSS OF PROFIT, REVENUE, CONTRACTS OR SAVINGS, OR ANY OTHER
DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF YOUR USE OF OR INABILITY TO USE THIS INFORMATION, ANY DEFECT IN THE
INFORMATION, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER IN AN
ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN IF [CLIENT] OR
ITS LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some
States, Territories and Countries do not allow certain liability exclusions or damages limitations,
so to that extent the above may not apply to you.
Export Control. You agree not to export from anywhere any part of the Data provided to you
or any direct product thereof except in compliance with, and with all licenses and approvals
required under, applicable export laws, rules and regulations.
Entire Agreement. These terms and conditions constitute the entire agreement between
[CLIENT] (and its licensors, including their licensors and suppliers) and you pertaining to the
subject matter hereof, and supersedes in their entirety any and all written or oral agreements
previously existing between us with respect to such subject matter.
Governing Law. The above terms and conditions shall be governed by the laws of the State
of Illinois [insert “Netherlands” where European NAVTEQ Data is used], without giving effect
to (i) its conflict of laws provisions, or (ii) the United Nations Convention for Contracts for the
International Sale of Goods, which is explicitly excluded. You agree to submit to the jurisdiction
of the State of Illinois [insert “The Netherlands” where European NAVTEQ Data is used] for any
and all disputes, claims and actions arising from or in connection with the Data provided to you
hereunder.
Government End Users. If the Data is being acquired by or on behalf of the United States
government or any other entity seeking or applying rights similar to those customarily claimed
by the United States government, this Data is a “commercial item” as that term is defined at 48
C.F.R. (“FAR”) 2.101, is licensed in accordance with these End-User Terms, and each copy of
Data delivered or otherwise furnished shall be marked and embedded as appropriate with the
following “Notice of Use,” and shall be treated in accordance with such Notice:
73
NAV-6AVUAE.indb 73
2013/05/07 18:21:53
NOTICE OF USE
CONTRACTOR (MANUFACTURER/ SUPPLIER) NAME: NAVTEQ
CONTRACTOR (MANUFACTURER/SUPPLIER) ADDRESS: 425 West Randolph Street,
Chicago, Illinois 60606
This Data is a commercial item as defined in FAR 2.101 and is subject to these End-User
Terms under which this Data was provided.
© 200X NAVTEQ – All rights reserved.
If the Contracting Officer, federal government agency, or any federal official refuses to use the
legend provided herein, the Contracting Officer, federal government agency, or any federal
official must notify NAVTEQ prior to seeking additional or alternative rights in the Data.
74
NAV-6AVUAE.indb 74
2013/05/07 18:21:53