DMC Analog Resistive Touchscreen ATP/AST Series Specifications

Specification
G150XG01 V3 incl. Touch - 4W
Content:
Mechanical Drawing
Appendix A: Specification of TFT G150XG01 V3
Appendix B: Specification of Touch AST-150C080A
(
Please be aware that some of the values e.g. optical, mechanical etc. of the complete unit
(assembled display plus touch panel) might differ from the original values of the individual components.
Version: March 2013
N
Note: This specification is subject to change without prior notice
1
2
4
3
6
5
7
8
A
A
328 ±0,3 ODT
309 VAT
305 AAT
304,10 AAD
14,74 (max. 15,53)
326,50 ±0,5 ODD
B
D
E
228,10 AAD
229 AAT
233 VAT
252 ±0,3 ODT
0,75 ±0,5
80 ±1
NOT TO BE DISCLOSED TO THIRD PARTY WITHOUT PERMISSION FROM
C
CONRAC GMBH / Data Modul AG
Contact
253,50 ±0,5 ODD
B
C
1,25 ±0,5
1
ODD
ODT
VAT
AAT
AAD
3
D
Outline Dimension Display
Outline Dimension Touch
Viewing Area Touch
Active Area Touch
Active Area Display
This drawing is only schematic representation of the structure.
The parts to be used are defined in the ProAlpha parts list.
000
REV.
NO. OF
CHANGES
26.02.2013 Aschenbrenner 10000 Neuanlage
DRAWN BY
E.C.-NO.
REL.DATE
MODIFICATION/DESCRIPTION
RELEASED: ja
FINISH
2
D-97990 Weikersheim
M 1:4
F
1
2
Pos.
Quantity
File Number
Description
1
1
1006572-T
TFT-LCD 15"
2
1
1009867-T
Touch
3
1
1009958-T
Klebeband 3x0,13
3
4
MATERIAL
DRAWING TITLE
D-80687 München
Assembly
TFT Display 15" + resistive Touch
FILE NUMBER:
1009959
PROJECT:
DMO_C_
TOLERANCES DIN ISO 2768-mK
SURFACES DIN ISO 1302
DRAWING/PART NUMBER
12002656
SCALE 1:3
000
SIZE ISO
A3
( ) Preliminary Specifications
( v ) Final Specifications
Module
15 Inch Color TFT-LCD
Model Name
G150XG01 V3
Customer
Date
Approved by
Vito Huang
Checked &
Approved by
Date
2010/11/16
Prepared by
KuoKang Tseng
Note: This Specification is subject to change
without notice.
2010/11/16
Audio-Video Business Unit /
AU Optronics corporation
G150XG01 V3 rev 1.0
Data Modul AG - www.data-modul.com
2
1/28
Contents
1. Operating Precautions.....................................................................................4
2. General Description .........................................................................................5
2.1 Display Characteristics...........................................................................................................5
2.2 Optical Characteristics ...........................................................................................................6
3. Functional Block Diagram ...............................................................................9
4. Absolute Maximum Ratings ..........................................................................10
4.1 Absolute Ratings of TFT LCD Module .................................................................................10
4.2 Absolute Ratings of Environment ........................................................................................10
5. Electrical Characteristics ..............................................................................11
5.1 TFT LCD Module .................................................................................................................. 11
5.2 Backlight Unit........................................................................................................................13
6. Signal Characteristic .....................................................................................14
6.1 Pixel Format Image ..............................................................................................................14
6.2 Scanning Direction ...............................................................................................................14
6.3 Signal Description ................................................................................................................15
6.4 The Input Data Format .........................................................................................................16
6.5 Interface Timing ....................................................................................................................18
6.6 Power ON/OFF Sequence ...................................................................................................19
7. Connector & Pin Assignment ........................................................................21
7.1 TFT-LCD Signal: LVDS Interface Connector .......................................................................21
7.2 LED Backlight Unit: LED Driver Connector .........................................................................23
7.3 LED Driver Connector Pin Assignment ...............................................................................23
8. Reliability Test Criteria ..................................................................................24
9. Mechanical Characteristics ...........................................................................25
9.1 LCM Outline Dimension (Front View) ..................................................................................25
9.2 LCM Outline Dimension (Rear View)...................................................................................26
10. Label and Packaging....................................................................................27
10.1 Shipping Label (on the rear side of TFT-LCD display) ......................................................27
10.2 Carton Package .................................................................................................................27
11 Safety.............................................................................................................28
11.1 Sharp Edge Requirements.................................................................................................28
11.2 Materials .............................................................................................................................28
11.3 Capacitors...........................................................................................................................28
11.4 National Test Lab Requirement..........................................................................................28
G150XG01 V3 rev 1.0
Data Modul AG - www.data-modul.com
3
2/28
Record of Revision
Version and Date
Rev1.0
2010/11/16
Page Old description
First Edition
New Description
G150XG01 V3 rev 1.0
Data Modul AG - www.data-modul.com
4
3/28
1. Operating Precautions
1) Since front polarizer is easily damaged, please be cautious and not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or soft cloth.
5) Since the panel is made of glass, it may be broken or cracked if dropped or bumped on
hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human
earth when handling.
7) Do not open nor modify the module assembly.
8) Do not press the reflector sheet at the back of the module to any direction.
9) In case if a module has to be put back into the packing container slot after it was taken
out from the container, do not press the center of the LED Reflector edge. Instead,
press at the far ends of the LED Reflector edge softly. Otherwise the TFT Module may
be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor
tilt the Interface Connector of the TFT Module.
11) TFT-LCD Module is not allowed to be twisted & bent even force is added on module in a very
short time. Please design your display product well to avoid external force applying to module
by end-user directly.
12) Small amount of materials without flammability grade are used in the TFT-LCD module. The
TFT-LCD module should be supplied by power complied with requirements of Limited Power
Source (IEC60950 or UL1950), or be applied exemption.
13) Severe temperature condition may result in different luminance, response time.
14) Continuous operating TFT-LCD Module under high temperature environment may accelerate
LED light bar exhaustion and reduce luminance dramatically.
15) The data on this specification sheet is applicable when TFT-LCD module is placed in
landscape position.
16) Continuous displaying fixed pattern may induce image sticking. It’s recommended to use
screen saver or moving content periodically if fixed pattern is displayed on the screen.
G150XG01 V3 rev 1.0
Data Modul AG - www.data-modul.com
5
4/28
2. General Description
G150XG01 V3 is a Color Active Matrix Liquid Crystal Display composed of a TFT-LCD display, a
driver circuit, and a backlight system. The screen format is intended to support XGA (1024(H) x
768(V)) screen and 16.2M (RGB 8-bits) or 262k colors (RGB 6-bits). All input signals are LVDS
interface compatible. All design rules of this module can correspond to PSWG standard.
G150XG01 V3 is designed for industrial display applications.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25
condition:
Items
Unit
Specifications
Active Area
[mm]
304.128(H) x 228.096(V)
Screen Diagonal
[inch]
1024x2, 768x2 (RGBW)
Pixels H x V
Pixel Pitch
15
[mm]
0.297 x 0.297
Pixel Arrangement
R.G.B.W. Rectangle
Display Mode
TN, Normally White
Nominal Input Voltage VDD
[Volt]
3.3 typ.
Typical Power Consumption
[Watt]
9.63 ( 64 Gray Bar pattern)
Weight
[Grams]
1000g (max.)
Physical Size
[mm]
326.5(H)x 253.5(V) x 13.1(D) (max.)
Electrical Interface
1 channel LVDS
Surface Treatment
Anti-glare, Hardness 3H
Support Color
16.2M / 262K colors
Temperature Range
Operating
Storage (Non-Operating)
RoHS Compliance
[ C]
[oC]
o
-30 to +85
-30 to +85
RoHS Compliance
G150XG01 V3 rev 1.0
Data Modul AG - www.data-modul.com
6
5/28
vengdistac
1with50cm
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25
Item
Unit
Conditions
[cd/m2]
100% Dimming
White Luminance
(center point)
Uniformity
Contrast Ratio
Cross talk
Response Time
Viewing Angle
%
9 Points
%
[msec]
[msec]
[msec]
Rising
Falling
Raising + Falling
1
75
80
-
1, 2, 3
400
700
-
4
-
5.7
-
8
1.2
-
2.3
1.5
70
80
-
[degree]
[degree]
Vertical
CR = 10
(Upper)
(Lower)
50
60
-
0.577
0.627
0.677
0.288
0.338
0.388
Green x
Green y
Blue x
Blue y
%
70
70
0.298
0.539
0.100
0.029
0.263
0.279
-
-
80
80
0.348
0.589
0.150
0.079
0.313
0.329
60
2.2
5
6
(Right)
(Left)
White y
Gamma Value
-
Horizontal
CR = 10
White x
Color Gamut
400
[degree]
[degree]
Red y
Note
320
-
Red x
Color / Chromaticity
Coordinates
(CIE 1931)
(Room Temperature):
Min.
Typ.
Max.
-
7
-
0.398
0.639
0.200
0.129
0.363
0.379
-
8
Note 1: Measurement method
Equipment Pattern Generator, Power Supply, Digital Voltmeter, Luminance meter (SR_3 or equivalent)
Aperture
Test Point
Environment
Center
< 1 lux
LCD Module
SR_3 or
equivalent
Measuring distance
Module Driving Equipment
Data Modul AG - www.data-modul.com
G150XG01 V3 rev 1.0
7
6/28
Note 2: Definition of 9 points position (Display active area : 304.128(H) x 228.096(V))
90 %
50 %
10 %
10 %
50 %
90 %
Note 3: The luminance uniformity of 9 points is defined by dividing the minimum luminance values by the maximum test
point luminance
Minimum Brightness of nine points
δW9 =
Maximum Brightness of nine points
Note 4: Definition of contrast ratio (CR):
Contrast ratio (CR)=
Brightness on the “White” state
Brightness on the “Black” state
Note 5: Definition of cross talk (CT)
CT = | YB – YA | / YA × 100 (%)
Where
YA = Luminance of measured location without gray level 0 pattern (cd/m2)
YB = Luminance of measured location with gray level 0 pattern (cd/m2)
1/2
1/6
2/3
1/6
A
B
1/2
1/3
1/6
A’
1/2
184 gray level
1/6
1/3
B’
1/2
2/3
G150XG01 V3 rev 1.0
Data Modul AG - www.data-modul.com
8
7/28
eurntofcasri#10,thescrn,ovea180°hrizontlad180°
Viewngalsthm
Note 6: Definition of response time:
The output signals of photo detector are measured when the input signals are changed from “White” to “Black”
(falling time) and from “Black” to “White” (rising time), respectively. The response time interval is between 10% and
90% of amplitudes. Please refer to the figure as below.
Optical
response
Tr
Tf
%
100
90
White
Black
White
10
0
Note 7: Definition of viewing angle
vertical range (off-normal viewing angles). The 180° viewing angle range is broken down as below: 90° (θ) horizontal
left and right, and 90° (Φ) vertical high (up) and low (down). The measurement direction is typically perpendicular to the
display surface with the screen rotated to its center to develop the desired measurement viewing angle.
Note 8: Note 8: Definition of Gamma Value
Generally, Gamma Value is defined as the slope of a Gray Level – Luminance curve in log-log space, that is
γ= d log(Luminance) / d log(Gray Level)
The Gamma Value defined in this spec is Linear Regression (γ1, γ2, γ3…, γ16). γ1 toγ16 are the section
gamma of the following 17 sampling points, GL(0), GL(16), GL(32), GL(48), GL(64), GL(80), GL(96), GL(112), GL(128),
GL(144), GL(160), GL(176), GL(192), GL(208), GL(224), GL(240) and GL(255), in 8 bits input.
G150XG01 V3 rev 1.0
Data Modul AG - www.data-modul.com
9
8/28
3. Functional Block Diagram
The following diagram shows the functional block of the 15 inch color TFT/LCD module:
DC/DC
Converter
AU ASIC
Timing
Controller
Receiver
LED Connector
+ 12V
RSDS
Transmitter
D1
Y-Driver IC
LVDS
G1
Gate Driver IC
LVDS
LVDS Connector
+ 3.3V
Gamma
Correction
Source Driver IC
TFT-LCD
1024(2)*768(2)
Pixels
LED B/L
LED Driver
G150XG01 V3 rev 1.0
Data Modul AG - www.data-modul.com
10
9/28
Bulbshode397anocdestin.
4. Absolute Maximum Ratings
4.1 Absolute Ratings of TFT LCD Module
Item
Logic/LCD Drive Voltage
Symbol
Vin
Min
- 0.3
Max
Unit
+3.6
[Volt]
Max
Unit
4.2 Absolute Ratings of Environment
Item
Operating Temperature
Symbol
TOP
Operation Humidity
HOP
Storage Humidity
HST
Storage Temperature
Note: Maximum Wet-
TST
Min
-30
8
-30
8
+85
[ C]
o
90
[%RH]
90
[%RH]
+85
[oC]
G150XG01 V3 rev 1.0
Data Modul AG - www.data-modul.com
11
10/28
5. Electrical Characteristics
5.1 TFT LCD Module
5.1.1 Power Specification
Symbol
Parameter
Min
Typ
Max
Units
3.0
3.3
3.6
[Volt]
VDD
Logic/LCD Drive
Voltage
IDD
VDD Current
-
700
840
[mA]
Irush
LCD Inrush Current
-
-
3
[A]
PDD
VDD Power
-
2.31
2.77
[Watt]
Remark
±10%
64 Gray Bar Pattern
(VDD=3.3V, at 60Hz)
Note 1
64 Gray Bar Pattern
(VDD=3.3V, at 60Hz)
Note 1: Measurement condition:
+3.3V
D6
D5
D2
D1
Q3
AO6402
R2
2
S
C3
R2
1
Q3
AO6402
G
+12.0V
SW MAG-SPST
(LCD Module Input)
D1
D2
D5
D6
C1
1uF/16V
1K
SW1
VDD
VCC
G
R1
47K
(High to Low)
Control
Signal
F1
S
VR1
0.01uF/25V
47K
1K
C2
1uF/25V
3.3V
90%
0V
10%
500 us
VDD rising time
64 Gray pattern
G150XG01 V3 rev 1.0
Data Modul AG - www.data-modul.com
12
11/28
5.1.2 Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when VDD is off.
Symbol
Item
Min.
Typ.
Max.
Unit
Remark
VTH
Differential Input High Threshold
-
-
100
[mV] VCM=1.2V
VTL
Differential Input Low Threshold
100
-
-
[mV] VCM=1.2V
Input Differential Voltage
100
400
600
[mV]
Differential Input Common Mode Voltage
1.15
1.2
1.45
[V]
|VID|
VICM
VTH/VTL=±100mV
Note: LVDS Signal Waveform.
G150XG01 V3 rev 1.0
Data Modul AG - www.data-modul.com
13
12/28
5.2 Backlight Unit
5.2.1 Parameter guideline for LED
Following characteristics are measured under stable condition using a LED driving board at 25
Symbol
Parameter
Min
Typ
Max
Unit
Vcc
Input Voltage
10.8
12
12.6
Volt
Ivcc
Input Curent
-
0.61
-
A
PLED
Power Consumption
-
7.32
10
Watt
FPWM
PWM Dimming Frequency
200
-
20k
Hz
Swing Voltage
4.5
5
5.5
5
-
100
2.0
5
5.5
-
80
84
mA
50000
-
-
Hrs
Dimming Duty Cycle
Vanalog
IF
Operating Life
Analog Dimming Voltage
LED Forward Current
Note 1: Ta means ambient temperature of TFT-LCD module.
%
>(Ro
om Temperature).
Remark
100% Dimming
100% Dimming
5V, 100% Brightness
Ta = 25 C
o
Ta = 25 C
o
Note 2: If G150XG01 V3 module is driven at high ambient temperature & humidity condition. The operating life will be
reduced.
Note 3: Operating life means brightness goes down to 50% initial brightness. Min. operating life time is estimated data.
G150XG01 V3 rev 1.0
Data Modul AG - www.data-modul.com
14
13/28
6. Signal Characteristic
6.1 Pixel Format Image
Following figure shows the relationship between input signal and LCD pixel format.
6.2 Scanning Direction
The following figures show the image seen from the front view. The arrow indicates the direction of scan.
AUO
AUO
Fig. 1 Normal scan (Pin4, REV = Low or NC)
Fig. 2 Reverse scan (Pin4, REV = High)
G150XG01 V3 rev 1.0
Data Modul AG - www.data-modul.com
15
14/28
6.3 Signal Description
The module using a pair of LVDS receiver SN75LVDS82(Texas Instruments) or compatible. LVDS is a differential
signal technology for LCD interface and high speed data transfer device. Transmitter shall be SN75LVDS83(negative
edge sampling) or compatible. The first LVDS port(RxOxxx) transmits odd pixels while the second LVDS port(RxExxx)
transmits even pixels.
Input Signal Interface
Pin No.
1
2
3
4
5
6
7
8
9
Symbol
Description
VDD
Power Supply, 3.3V (typical)
VDD
GND
REV
Rin0-
Rin0+
GND
Rin1-
Rin1+
10
GND
12
Rin2+
11
13
14
15
16
17
18
19
20
Rin2GND
ClkIN-
ClkIN+
GND
Rin3-
Rin3+
NC/GND
SEL68
Power Supply, 3.3V (typical)
Ground
Reverse Scan [H: Enable; L/NC: Disable]*Note1,3
- LVDS differential data input
+ LVDS differential data input
Ground
- LVDS differential data input
+ LVDS differential data input
Ground
- LVDS differential data input
+ LVDS differential data input
Ground
- LVDS differential clock input
+ LVDS differential clock input
Ground
- LVDS differential data input *Note2
- LVDS differential data input *Note2
Reserved for AUO internal test. Please set it as NC or Ground.
Selection for 6 bits/8bits LVDS data input[H/NC: 6bits, L: 8bits]*Note1,3
Note 1: Input signals shall be in low status when VDD is off.
Note 2: For 6bits input mode, pin 17 and pin 18 must be floated.
Note 3: High stands for “3.3V”, Low stands for “0V”, NC stands for “No Connection”.
G150XG01 V3 rev 1.0
Data Modul AG - www.data-modul.com
16
15/28
6.4 The Input Data Format
6.4.1 SEL68
SEL68 = ”High” or “NC” for 6 bits LVDS Input
SEL68 = “Low” for 8 bits LVDS Input
Signal Name
R7
R6
R5
R4
R3
R2
R1
R0
G7
G6
G5
G4
G3
G2
G1
G0
Red Data 7
Red Data 6
Red Data 5
Red Data 4
Red Data 3
Red Data 2
Red Data 1
Red Data 0
Green Data 7
Green Data 6
Green Data 5
Green Data 4
Green Data 3
Green Data 2
Green Data 1
Green Data 0
Description
Red-pixel Data
Remark
For 6Bits LVDS input
MSB: R5 ; LSB: R0
For 8Bits LVDS input
MSB: R7 ; LSB: R0
Green-pixel Data
For 6Bits LVDS input
MSB: G5 ; LSB: G0
For 8Bits LVDS input
MSB: G7 ; LSB: G0
G150XG01 V3 rev 1.0
Data Modul AG - www.data-modul.com
17
16/28
B7
B6
B5
B4
B3
B2
B1
B0
RxCLKIN
Blue Data 7
Blue Data 6
Blue Data 5
Blue Data 4
Blue Data 3
Blue Data 2
Blue Data 1
Blue Data 0
LVDS Data Clock
DE
Data Enable Signal
Blue-pixel Data
For 6Bits LVDS input
MSB: B5 ; LSB: B0
For 8Bits LVDS input
MSB: B7 ; LSB: B0
The typical frequency is 65MHz. The
signal is used to strobe the pixel data and
DE signals. All pixel data shall be valid at
the falling edge when the DE signal is
high.
When the signal is high, the pixel data
shall be valid to be displayed.
Note: Output signals from any system shall be low or Hi-Z state when VDD is off.
G150XG01 V3 rev 1.0
Data Modul AG - www.data-modul.com
18
17/28
6.5 Interface Timing
6.5.1 Timing Characteristics
Signal
Clock Timing
Vsync Timing
Hsync Timing
Parameter
Symbol
Clock frequency
1/ TClock
Vertical
Section
Horizontal
Section
Period
TV
Active
TVD
Blanking
TVB
Period
TH
Active
THD
Blanking
THB
Frame Rate
F
Min.
50
Typ.
65
Max.
80
776
806
1023
-
768
-
8
38
255
1074
1344
2047
-
1024
-
50
320
1023
50
60
75
Unit
MHz
TLine
TClock
Hz
Note: DE mode only.
Note : Typical value refer to VESA STANDARD
6.5.2 Input Timing Diagram
G150XG01 V3 rev 1.0
Data Modul AG - www.data-modul.com
19
18/28
6.6 Power ON/OFF Sequence
VDD power and LED on/off sequence is as below. Interface signals are also shown in the chart. Signals from any
system shall be Hi-Z state or low level when VDD is off.
Power ON/OFF sequence timing
Parameter
T1
T2
Value
Min.
Typ.
Max.
30
40
50
0.5
-
10
-
-
0.5
T3
200
T5
10
T4
T6
T7
10
[ms]
-
[ms]
-
[ms]
[ms]
[ms]
-
[ms]
-
-
10
[ms]
0
16
50
1000
-
-
T10
110
T12
-
T13
-
[ms]
-
10
T11
-
10
0
T8
T9
-
Units
-
-
-
[ms]
-
[ms]
10
[ms]
[ms]
[ms]
The above on/off sequence should be applied to avoid abnormal function in the display. Please make sure to turn off
G150XG01 V3 rev 1.0
Data Modul AG - www.data-modul.com
20
19/28
the power when you plug the cable into the input connector or pull the cable out of the connector.
G150XG01 V3 rev 1.0
Data Modul AG - www.data-modul.com
21
20/28
7. Connector & Pin Assignment
Physical interface is described as for the connector on module. These connectors are capable of accommodating
the following signals and will be following components.
7.1 TFT-LCD Signal: LVDS Interface Connector
Connector Name / Designation
Signal Connector
Connector Model Number
MSB240420-E
Manufacturer
Mating Housing Part Number
Pin#
1
3
5
7
9
11
13
15
17
19
Signal Name
STM or compatible
P240420 or compatible
Pin#
Signal Name
VDD
2
VDD
Rin0-
6
Rin0+
Rin1+
10
GND
14
ClkIN-
Rin3-
18
Rin3+
REV
GND
4
GND
8
Rin1-
Rin2-
12
Rin2+
ClkIN+
16
NC/GND
20
GND
GND
SEL68
G150XG01 V3 rev 1.0
Data Modul AG - www.data-modul.com
22
21/28
7.1.1 Connector Illustration
SEL68
G150XG01 V3 rev 1.0
Data Modul AG - www.data-modul.com
23
22/28
7.2 LED Backlight Unit: LED Driver Connector
Connector Name / Designation
LED Connector
Manufacturer
E&T or compatible
Connector Model Number
3808K-F05N-02R or compatible
Mating Connector Model Number
H208K-P05N-02B or compatible
7.3 LED Driver Connector Pin Assignment
Pin#
Symbol
Signal Name
2
GND
GND
1
3
4
5
Vcc
Enable
Dimming
NC
12V
5V-On / 0V-Off
PWM Dimming or Analog Dimming
NC
G150XG01 V3 rev 1.0
Data Modul AG - www.data-modul.com
24
23/28
/0,3m
B
hoinur6s0,1cyles
8. Reliability Test Criteria
Items
Temperature
Humidity Bias
High Temperature
Operation
Low Temperature
Operation
Hot Storage
Cold Storage
Thermal Shock
Test
Shock Test
(Non-Operating)
Required Condition
50
80%,300 hours
85 ,300 hours
-3
,300 hours
85
-3
-2
50G,20ms,Half-sine wave,( ±X, ±Y, ±Z)
Vibration Test
(Non-Operating)
1.5G, (10~200Hz, P-P)
On/off test
On/10 sec, Off/10 sec, 30,000 cycles
ESD
Note
30 mins/axis (X, Y, Z)
Contact Discharge: ± 8KV, 150pF(330Ω ) 1sec, 8 points, 25 times/ point
Air Discharge: ± 15KV, 150pF(330Ω ) 1sec, 8 points, 25 times/ point
Note 1
Note1: According to EN61000-4-2, ESD class B: Some performance degradation allowed. No data lost
.
Self-recoverable. No hardware failures.
G150XG01 V3 rev 1.0
Data Modul AG - www.data-modul.com
25
24/28
9.1 LCM Outline Dimension (Front View)
9. Mechanical Characteristics
Data Modul AG - www.data-modul.com
26
25/28
G150XG01 V3 rev 1.0
9.2 LCM Outline Dimension (Rear View)
Data Modul AG - www.data-modul.com
27
26/28
G150XG01 V3 rev 1.0
10. Label and Packaging
10.1 Shipping Label (on the rear side of TFT-LCD display)
V.3
10.2 Carton Package
Max capacity: 12pcs TFT-LCD module per carton
Max weight: 20 kg per carton
Outside dimension of carton: 375(L)mm* 430(W)mm* 353(H)mm
G150XG01 V3 rev 1.0
Data Modul AG - www.data-modul.com
28
27/28
11 Safety
11.1 Sharp Edge Requirements
There will be no sharp edges or comers on the display assembly that could cause injury.
11.2 Materials
11.2.1 Toxicity
There will be no carcinogenic materials used anywhere in the display module. If toxic materials are used,
they will be reviewed and approved by the responsible AUO toxicologist.
11.2.2 Flammability
All components including electrical components that do not meet the flammability grade UL94-V1 in the
module will complete the flammability rating exception approval process.
The printed circuit board will be made from material rated 94-V1 or better. The actual UL flammability
rating will be printed on the printed circuit board.
11.3 Capacitors
If any polarized capacitors are used in the display assembly, provisions will be made to keep them from
being inserted backwards.
11.4 National Test Lab Requirement
The display module will satisfy all requirements for compliance to:
UL 1950, First Edition
U.S.A. Information Technology Equipment
G150XG01 V3 rev 1.0
Data Modul AG - www.data-modul.com
29
28/28
Specification
AST/ATP Series
Revision 11
Version March 23, 2010
Data Modul AG - www.data-modul.com
Table of Contents
1. Product Specifications ...........................................................................................................................3
1-1. Product Applicable .............................................................................................................................3
1-2. Structure.............................................................................................................................................3
1-3. Environmental Specifications .............................................................................................................3
1-4. Mechanical Characteristics ................................................................................................................3
1-5. Electrical Characteristics ....................................................................................................................3
1-6. Appearance ........................................................................................................................................4
2. Testing Regulation ..................................................................................................................................5
2-1. Testing Regulation..............................................................................................................................5
2-2. Environmental Specifications .............................................................................................................5
2-3. Mechanical Characteristics ................................................................................................................5
2-4. Electrical Characteristics ....................................................................................................................6
2-5. Appearance ........................................................................................................................................6
3. Reliability Condition ...............................................................................................................................7
3-1. Temperature Condition .......................................................................................................................7
4. Recommended Connector .....................................................................................................................7
4-1. Recommended Connector .................................................................................................................7
5. Handling Notes........................................................................................................................................8
5-1. Precautions ........................................................................................................................................8
5-2. Handling Notes...................................................................................................................................8
5-3. Construction Notes.............................................................................................................................8
5-4. Electrical & Software Notice ...............................................................................................................8
5-5. Mounting Notes ..................................................................................................................................9
6. Warranty ................................................................................................................................................10
6-1. Warranty Period ...............................................................................................................................10
6-2. Warranty Target................................................................................................................................10
6-3. Warranty Exceptions ........................................................................................................................10
6-4. Tools.................................................................................................................................................10
6-5. Changes...........................................................................................................................................10
7. Revision history .................................................................................................................................... 11
2
Rev. 11©1999 - 2010 DMC Co., Ltd.
Data Modul AG - www.data-modul.com
2
1. Product Specifications
1-1. Product Applicable
§ This specification is applied to the analog resistive touchscreen: ATP/AST Series.
1-2. Structure
§ Dimensions, structure, and shape are referred on the drawing attached.
1-3. Environmental Specifications
Specification
Value
Operating Temperature
-20°C to 70°C (no condensation)
Operating Humidity
-20°C to 60°C Less than 90%RH (no condensation)
3
Exceeding 60°C 133.8g/m (no condensation)
Storage Temperature
-40°C to 80°C (no condensation)
Storage Humidity
-40°C to 60°C Less than 95%RH (no condensation)
Exceeding 60°C 142.9g/m3 (no condensation)
Chemical Resistance
(top surface)
Toluene, Tricholoroethylene, Athetone, Alcohol,
Gasoline, Machine Oil, Ammonia, Glass Cleaner,
Mayonnaise, Ketchup, Wine, Salad Oil, Vinegar, Lipstick, etc.
1-4. Mechanical Characteristics
Specification
Value
Activation Force
0.05N to 0.8N
Operating Life
Input (finger)
10,000,000 hits
Character Input (pen)
100,000 characters
Light Transmittance
Over 80% (typical value at full wavelength)
Surface Hardness
Over 2H (by JIS pencil hardness)
1-5. Electrical Characteristics
Specification
Value
Maximum Voltage
Maximum Current
Linearity
Terminal Resistance
Insulation Resistance
Chattering
DC6V
Top Electrode
100mA
Bottom Electrode
100mA
Between the Top and Bottom
0.5mA
Under ±2% (Under ±1% (typical value))
Top Electrode
Less than 1kΩ
Bottom Electrode
Less than 1kΩ
Neighboring Terminals
Over 20MΩ at 25V
Active Area Electrodes
Over 20MΩ at 25V
Less than 10msec at ON/OFF.
3
Rev. 11©1999 - 2010 DMC Co., Ltd.
Data Modul AG - www.data-modul.com
3
1-6. Appearance
§ Scratch, dust (W = width, L = length, D = average diameter = (longest + shortest) /2)
Item
Width (mm)
Length (mm)
Acceptable Numbers
Linear(Scratch/Dust)
Over 0.1mm in
diameter refer to the
Circular.
0.1≥W>0.05
4≥L
1pcs in φ30mm
0.05≥W>0.03
10≥L
2pcs in φ20mm
0.03≥W
20≥L
Acceptable
Circular
(Scratch/Dust)
0.4≥D>0.3 *1
1pcs in viewing area *1
0.3≥D>0.2
2pcs in φ30mm
0.2≥D
Acceptable
Total
Within 5pcs
/panel
Applied only in the Active Area. Scratches or dusts in the outside of the Active Area are acceptable unless the
electrical characteristics are affected.
*1 Applied to the size of 14 inches or more.
§ Dirt
Acceptable if not noticeable on a black mat.
§ Tip, crack (t = glass thickness) (applicable only for the glass)
Item
Size (mm)
Z
Corner
X
Y
X
Y
Side
Z
Acceptable Numbers
X
≤3
Y
≤3
Z
≤t
X
≤5
Y
≤3
Z
≤t
Crack
2pcs
/panel
2pcs
/side
Not acceptable
4
Rev. 11©1999 - 2010 DMC Co., Ltd.
Data Modul AG - www.data-modul.com
4
2. Testing Regulation
2-1. Testing Regulation
§ If the regulation is not specified, the test is performed under the supplier’s regulation.
§ Tests are performed under the room temperature unless specified. The room temperature is referred as
follows:
Temperature: 20°C±5°C
Humidity:
65%±10%RH
2-2. Environmental Specifications
§ Chemical Resistance Test
Condition:
Tested after leaving the chemical on the surface for 12 hours being wiped off by cloth.
Judgement:
Must be no effect in appearance.
2-3. Mechanical Characteristics
§ Activation Force Test
Condition:
Judgement:
Measured by depressing the point between
the dots to the conduction by the testing rod
(Figure 1).
Must satisfy the specification.
Silicon Rubber
(Hardness: 60°)
Tip: R = 4.0
§ Operating Life Test (Finger)
Condition:
Testing rod: Refer to Figure 1
Voltage:
DC5V
Load:
3N
Cycle:
2 hits/sec
Judgement:
Must satisfy the following:
Activation Force:
Linearity:
Terminal Resistance:
Insulation Resistance:
Figure 1. Testing rod 1
Must satisfy the specification.
Must satisfy the specification.
Must satisfy the specification.
Must satisfy the specification.
§ Operating Life Test (Pen)
Condition:
Testing rod: Refer to Figure 2
Voltage:
DC5V
Load:
2.5N
Input size: 10 x 10 mm
Input character: A to Z/minute
Judgement:
Must satisfy the following:
Activation Force:
Linearity:
Terminal Resistance:
Insulation Resistance:
Polyacetal resin
Tip: R = 0.8
Figure 2. Testing rod 2
Must satisfy the specification.
Must satisfy the specification.
Must satisfy the specification.
Must satisfy the specification.
5
Rev. 11©1999 - 2010 DMC Co., Ltd.
Data Modul AG - www.data-modul.com
5
2-4. Electrical Characteristics
§ Terminal Resistance Test
Condition:
Top and bottom electrodes are measured at the terminal.
Judgement:
Must satisfy the specification.
§ Insulation Resistance Test
Neighboring Terminals: Measured by applying the reference voltage to the terminals
Active Area Electrodes: Measured by applying the reference voltage to the top and bottom electrodes.
Judgement:
Must satisfy the specification.
2-5. Appearance
§ Appearance Test
Condition:
Tested by an examiner with over 1.0 eyesight at 30cm away from the product under the
transmittable light at over 60° the surface of the product.
Judgement:
Must satisfy the specification.
Data Modul AG - www.data-modul.com
6
3. Reliability Condition
3-1. Temperature Condition
§ Temperature Condition Test
Following test are performed in the condition with no dew condensation:
Cold Test:
Tested after leaving the parts in -40°C±3°C for 240 hours and in the room temperature
for 2 hours.
Heat Test:
Tested after leaving the parts in 80°C±3°C for 240 hours and in the room temperature for
2 hours.
Humidity Test: Tested after leaving the parts in the temperature 60°C±3°C, humidity 90 to 95% for 240
hours and in the room temperature for 2 hours.
Cycle Test:
Tested after 5 cycles of leaving the parts in the temperature -30°C±3°C for 1 hour and in
the room temperature for 0.5 hours, then leaving the parts in the temperature 70°C±3°C
for 1 hour and in the room temperature for 0.5 hours.
Judgement:
Must satisfy the following:
Activation Force:
Must satisfy the specification.
Linearity:
Must satisfy the specification.
Terminal Resistance:
Must satisfy the specification.
Insulation Resistance: Must satisfy the specification.
Appearance:
Must satisfy the specification.
4. Recommended Connector
4-1. Recommended Connector
Part No.
Pins
Pitch
KCA-K4R
4 pin Double-sided
1.25mm
7
Rev. 11©1999 - 2010 DMC Co., Ltd.
Data Modul AG - www.data-modul.com
7
5. Handling Notes
5-1. Precautions
§ This product is intended for use in standard applications (computers, office automation, and other office
equipment, industrial, communications, and measurement equipment, personal and household devices,
etc.) Please avoid using this product for special applications where failure or abnormal operation may
directly affect human lives, or cause physical injury or property damage, or where extremely high levels
of reliability are required (such as aerospace systems, vehicle operating control, atomic energy controls,
medical devices for life support, etc.).
5-2. Handling Notes
§ Do not depress or scratch the product with any object with a sharp edge or end.
§ Do not forcibly bend or fold the product.
§ When the product is stored, make sure it is packed in a packing box and stored in a storage temperature
range, eliminating any outside load.
§ Do not use or store the product under a condition where the product will be exposed to water, organic
solution or acid.
§ Do not use the product under the direct sunlight.
§ Do not disassemble the product.
§ When you handle the product, Hold the product by its body. Do not hold by the tail.
§ Clean the product with a soft cloth or a soft cloth with neutral detergent or alcohol. When contaminated
by chemicals, wipe them off immediately with caution not to cause injury to human body.
§ The edge of the glass is not rounded and may cause injury.
5-3. Construction Notes
§ The environmental specifications, mechanical characteristics, and electrical characteristics are only
applied to the Active Area.
§ Do not use the touchscreen when the condensation occurs. The condensation inside of the touchscreen
is a natural phenomenon and should disappear after the touchscreen is warmed up.
5-4. Electrical & Software Notice
The best performance can be obtained when used with the original analog resistive touchscreen controller,
“TSC-10” Series. If the touchscreen controller or controller software is to be developed by the customer,
please note the following:
§ There is a contact resistance between the top and bottom electrodes and it changes by the pressure of a
finger or a pen. The data must be read after the contact resistance becomes stabilized.
§ The terminal resistance of the analog resistive touchscreen varies by the individual, time, and
environment. The controller software must have the calibration function to adjust the input position and
the display position.
§ The analog resistive touchscreen outputs 2 point input as 1 point in between the 2 points. The controller
software must not be designed to have the 2 point input function.
§ For drawing applications, the line may be intermittent when the pen comes on the dot spacers. A
software compensation is needed.
8
Rev. 11©1999 - 2010 DMC Co., Ltd.
Data Modul AG - www.data-modul.com
8
5-5. Mounting Notes
Bezel
Bezel edge must be positioned in the area between the Active
Area and the Viewing Area. The bezel may press the
touchscreen and cause input if the edge enters the Active
Area.
§ Gap between the Bezel and Touchscreen
Active Area
Viewing Area
Bezel
Top Electrode
A gap of approximately 0.5mm is needed between the bezel
and the top electrode. It may cause unexpected input if the
gap is too narrow.
0.5mm
§ Bezel Edge
§ Cushion
If a cushion is used between the bezel and the top electrode,
the cushion must be free enough to absorb the expansion and
contraction difference between the bezel and the top
electrode. If the cushion is squashed too hard, the expansion
and the contraction difference may cause the distortion to the
top electrode.
The cushion must be positioned more than 1mm outward from
an inside of the insulation area. (Please refer to right figure)
Bezel
Cushion
Top Electrode
Insulation Area
Minimum 1mm
§ Tolerance
There is a tolerance of 0.2 to 0.3mm for the dimensions of the
touchscreen and the tail. A gap must be made to absorb the
tolerance in the case and the connector.
0.2 - 0.3mm
Case
§ Tail
The tail must not be forcibly stressed or bent too hard to avoid
the conduction in the insulated area and wire breaking.
Tail
§ Mounting
Bezel
Touchscreen must be held from the bottom such as the
structure gluing the touchscreen onto the display. If the
touchscreen is glued to the bezel, the adhesion between the
top and bottom electrode is stressed and may come off.
Display
§ Forbidden Area
The area within 2mm from the insulation area is structurally
week for the pressure, espcially for pen use. The film may be
forcibly bent and may cause defection. This area must be
protected by the bezel and input must be avoided.
§ Air Vent
Bezel
Forbidden Area
Most of the touchscreens have the air vent to equalize the
inside air pressure to the outside one. The air vent must be
open and liquid contact must be avoided as the liquid may be
absorbed if the lquid is accumilated near the air vent. The top
electlode must not be swelled by the air pressure from inside
of the case.
Data Modul AG - www.data-modul.com
9
6. Warranty
6-1. Warranty Period
§ The warranty period is limited to 1 year from the date of shipping. The warranty for the initial defection
such as appearance defection is limited to 1 month.
§ Any defected parts under proper use will be examined by the supplier and replaced by the new parts if
the defection is considered to be caused by the supplier.
§ The replacement is subject to be included in the next lot.
6-2. Warranty Target
§ The warranty only covers the product itself and does not cover any damage to others caused by using
this product. Onsite repair or replacement is not supported.
§ We will do our best for delivery problem and product defections, but the warranty for the production line
is not covered.
§ Resistive touchscreens are structurally not repairable. All defections are subject to replacement.
6-3. Warranty Exceptions
Following conditions are not covered with the warranty and subject to charge.
§ Any malfunctions and damages during transportation and transfer by the user.
§ Any malfunctions and damages caused by a natural disaster or a fire.
§ Any malfunctions and damages caused by static electricity
§ Any malfunctions and damages caused by the failure of the associated equipment.
§ If the product is remodeled, disassembled or repaired by the user.
§ If the product is glued onto the equipment and uninstalled.
§ Any malfunctions and damages caused by an improper usage and handling against the specifications
and notes.
6-4. Tools
§ To maintain the quality, the printing screens and the die-cut plates are generally limited to use up to 1
year. Reorders after 1 year from the initial order or from the last renewal are subject to the tooling charge
for replacing the printing screens and the die-cut plates. Reorders for the discontinued standard parts are
also subject to tooling charge.
§ All the tools, such as CAD data (except for the drawing for approval), block copies (films), printing
screens, and die-cut plates are not to be provided for administrative purpose.
6-5. Changes
§ Because of the manufacturing process, changing the dimensions, circuit pattern, and the tail position
requires replacing most of the tools and is subject to high tooling charge. Please be careful when
ordering and approving the drawing.
§ Circuit pattern and the materials that does not affect the environmental, electrical, and mechanical
characteristics such as film, glass, ink and glue are subject to change for the supplier’s reason or for
improvement within the specifications.
§ Standard products are subject to change for improvement without notice.
10
Rev. 11©1999 - 2010 DMC Co., Ltd.
Data Modul AG - www.data-modul.com
10
7. Revision history
Rev1 (April 15, 1998)
Initial release
Rev2 (June 1, 1999)
The overall revision by specification review.
Rev3 (April 1, 2002)
The address in the office was changed by the move.
Rev4 (August 16, 2002)
1-4.Activation Force is changed “50g± 30g” to “0.5N±0.3”.
1-4.Light Transmission is changed 76% to 80%(TYP).
Rev5 (September 3, 2002)
1-3.Operating Temperature is changed “0°C to 60°C” to “-20°C to 70°C”.
1-3.Storing Temperature is changed “-20°C to 70°C” to “-40°C to 80°C”
1-4.Operating Life is changed “1,000,000 hits” to “10,000,000 hits”.
1-5.Linearity is changed “Under ±2%” to “Under ±1% (typical value)”.
Rev6 (June 28, 2004)
1-3.Operating Humidity is changed “Less than 90%RH (no condensation)” to “-20°C to 60°C Less than
3
90%RH (no condensation) Exceeding 60°C 133.8g/m (no condensation)”.
1-3.Storing Humidity is changed “Less than 95%RH (no condensation)” to “-40°C to 60°C Less than
95%RH (no condensation), Exceeding 60°C 142.9g/m3 (no condensation)”.
1-5.Maximum Voltage is changed “DC5V” to “DC6V”.
1-5.Linearity is changed “Under ±1% (typical value)” to “Under ±2% (Under ±1% (typical value))”.
Rev7 (October 15, 2004)
4-4.Electrical & Software Notice: Changed “FIT-10 series” to “TSC-10 series”.
Rev8 (April 7, 2005)
Added Item4 Recommended Connector.
Rev9 (September 6, 2005)
2-3.Mechanical Characteristics: Added Operating Life Test (Pen).
11
Rev. 11©1999 - 2010 DMC Co., Ltd.
Data Modul AG - www.data-modul.com
11
Rev10 (November 10, 2006)
The specification item name was changed.
1-3.”Storing Temperature” to “Storage Temperature”
1-3.”Storing Humidity” to “Storage Humidity”
1-4.”Operating Load” to “Activation Force”
1-4.”Light Transmissivity” to “Light Transmittance”
1-4.”Top Surface Hardness” to “Surface Hardness”
2-3.”Operating Load Test” to “Activation Force Test”
2-3.”Operating Load” to “Activation Force”
3-1.”Operationg Load” to “Activation Force”
1-4.Operating Force is changed “0.5N±0.3N” to “0.05N to 0.8N”.
1-5.Insulation Resistance is changed “Over 100MΩ at 25V” to “Over 20MΩ at 25V”.
1-6.Tip, crack: Deleted “Applied only in the Active Area. Scratches or dusts in the outside of the Active
Area are acceptable unless the electrical characteristics are affected.”.
2-3. § Operating Life Test (Pen) Load: 300g to 250g
5-5. § Cushion: Added an installation position of a cushion.
7.Added Revision History.
Rev11 (March 23, 2010)
1-6. Appearance specification was revised. Characters of scratch/dust were classified into Circular and
Linear. The total acceptable number of scratch/dust was added.
2-3. Unit of Load (g) changed to (N) to unify the unit
2-3. Operating Life Test (Finger) Activation Force, Within ±50% of the specification → Must satisfy
the specification. (Clerical error was corrected)
2-3. Operating Life Test (Pen) Activation Force, Within ±50% of the specification → Must satisfy the
specification. (Clerical error was corrected)
3-1. Temperature Condition
Cold Test -30℃→ -40℃ (Clerical error was corrected)
3-1. Activation Force, Within ±50% of the specification. → Must satisfy the specification
(Clerical error was corrected)
12
Rev. 11©1999 - 2010 DMC Co., Ltd.
Data Modul AG - www.data-modul.com
12
DI SPLAYS AND EMBEDDED SOLUTIONS
DI SPLAYS AND EMBEDDED SOLUTIONS
DATA MODUL Headquarters Munich
Landsberger Str. 322
D-80687 Munich - Germany
Phone: +49-89-56017-0
Fax: +49-89-56017-119
www.data-modul.com
Sales Office Hamburg
Borsteler Chaussee 51
D-22453 Hamburg - Germany
Phone: +49-40-42947377-0
Sales Office Duesseldorf
Fritz-Vomfelde-Str. 8
D-40547 Duesseldorf - Germany
Phone: +49-211-52709-0
Sales Office Scandinavia
Lundsmindevej 5
DK-6000 Kolding - Denmark
Phone: +45-75-224477
DATA MODUL France, S.A.R.L.
Bat B – Hall 204
1-3 Rue des Campanules
F-77185 Lognes - France
Phone: +33-1-60378100
DATA MODUL Italy, S.r.l.
Regus Center Senigallia
Via Senigallia 18/2
I-20161 Milano - Italy
Phone: +39-02-64672509
DATA MODUL Iberia, S.L.
c/ Adolfo Pérez Esquivel 3
Edificio Las Americas III Oficina 40
28230 Parque Empresarial Las Rozas / Madrid - Spain
Phone: +34-916-366458
DATA MODUL Suisse GmbH
Stationsstr. 57
CH-8606 Nänikon - Switzerland
Phone: +41-44-94091-50
DATA MODUL Ltd. / UK
Collins Building
3 Vigo Place - Aldridge - Walsall WS9 8UG - United Kingdom
Phone: +44-121-6988641
DATA MODUL Inc. / USA
275 Marcus Blvd, Unit K
Hauppauge, NY 11788 - USA
Phone: +1-631-951-0800
2 Data Modul AG | Landsberger Str. 322 | 80687 Munich | Tel. +49-89-56017-0 | Fax +49-89-56017-119 | www.data-modul.com