DigiMemo Bluetooth Transmitter
for Smartphone
User Guide
BTX-100
Preparation ............................................................................. 1
Pairing the Bluetooth Transmitter................................................................. 1
Installing the DigiMemo Express Software to Your Phone ............................ 1
Turning on and Working modes of the Digital Pad ....................................... 2
Writing Mode and DHW file .................................................................... 2
Bluetooth Mode ...................................................................................... 2
Turning off the Digital Pad ............................................................................ 2
Automatic Shutting down in Bluetooth mode ......................................... 2
DigiMemo Express Software.................................................... 3
Your DHW File List ........................................................................................ 3
To View Your DHW files ................................................................................ 3
The Capture Feature ..................................................................................... 4
To Send via MMS .......................................................................................... 5
To Send via e-Mail......................................................................................... 5
To Save to Your Phone .................................................................................. 6
The File name for the Auto and Frame Capture ...................................... 6
The Default Folder for the Saved Files ..................................................... 6
Trouble Shooting ..................................................................... 7
Specifications .......................................................................... 7
the Transmitter is BTX-100. Enter the Transmitter
passcode (0000).
Preparation
Pairing the Bluetooth Transmitter
Before you can use the Transmitter with your phone, it has
to be paired once with your phone.
To pair the Transmitter with a phone:
1. When the digital pad of your DigiMemo is turned off,
connect the Transmitter to the digital pad by the mini
USB connectors.
Indicator
Transmitter
Mini USB Connector
4. When successfully paired, the indicator light on the
Transmitter changes to a solid light.
Installing the DigiMemo Express
Software to Your Phone
1. Connect your phone to the computer, preferably with
the USB cable that comes with your phone.
Tip: Please refer to your phone’s user guide on how
to connect to the computer.
2. According to the OS of your phone, copy the relevant
installation file to your phone from the software CD
supplied with the Transmitter:
 For Symbian S60 phone
DMExpress_s60.sisx in the For Symbian S60
folder
Digital Pad
 For Symbian UIQ phone
DMExpress_uiq.sis in the For Symbian UIQ
folder
2. Press and hold the Power button on the digital pad
(about 5 seconds) until the indicator on the Transmitter
rapidly flashes.
3. Prepare your phone according to the phone user guide
on how to add a Bluetooth device. The device name of
 For Windows Mobile phone
DMExpress_wm.cab in the For Windows Mobile
folder
3. Select the installation file from your phone to start the
installation.
1
4. Follow the instructions on your phone to complete the
installation of the DigiMemo Express software.
Tip! You can also refer to the user guide of your phone
for other ways to transfer an installation file (for example,
to download it, or receive it in an MMS or as an e-Mail
attachment) and install the software to your phone.
Turning on and Working modes of the
Digital Pad
Writing Mode and DHW file
When turning on the digital pad without the
Transmitter connected, the working mode of the
digital pad will be in Writing mode. The display
will be on and show the Digital Page Number,
Storage Device icon and Time display.
In the Writing mode, everything you write on
the digital pad will be immediately captured and
stored in the current Digital Page file which is the DHW
file.
Tip! You can refer to the user guide of your DigiMemo
for more information.
Bluetooth Mode
In Bluetooth mode, the digital pad can be connected to
your phone through Bluetooth connectivity.
To turn on the digital pad into Bluetooth mode
1. Connect the Transmitter to the digital pad by the mini
2
USB connector.
2. Press and hold the Power button on the
digital pad until the display is on. The working
mode of the digital pad is now in Bluetooth
mode.
The display will show the Bluetooth icon
and
the indicator light on the Transmitter remains
solidly lit.
Tip! When in the Writing mode, connecting the
Transmitter to the digital pad will automatically change the
working mode to Bluetooth mode.
Note! In the Bluetooth mode, your handwriting on the
digital pad will not be captured and stored.
Turning off the Digital Pad
Press and hold the Power button until the display is blank.
Tip! When in the Bluetooth mode, disconnecting the
Transmitter from the digital pad will turn off the digital pad.
Automatic Shutting down in Bluetooth mode
If your phone has not accessed any data from the digital
pad within the previous 15 minutes, the digital pad will
sound a beep and automatically shut down.
DigiMemo Express Software
Tip! According to your phone specification, you can use
the function keys or navigating feature on your phone to
zoom, scroll, rotate or browse. Pressing # or  to zoom in
or out is available only for the physical numeric keypad.
Your DHW File List
1. Select the DigiMemo Express software to
start it in your phone.
Tip! Please refer to your phone’s user
guide for the location of installed software.
According to the OS of your phone, the menu name in
the software will be Options, More or Menu at the
bottom of the phone screen.
2. Select Digital Pad or Phone Folder from which you
want to select your DHW files.
 The Phone Folder is the default folder in which
you save your DHW files from the digital pad to
your phone. Please refer to the following section on
how to Save to Your Phone.
memory card in the digital pad.
Notice! If you have paired more than one Transmitter
(BTX-100) with your phone, you will need to select a
Transmitter when prompted.
4. The DHW File List will appear on your phone screen.
Tip!
Select Mark in the menu to mark the files.
To View Your DHW files
1. In the DHW File List, select a file to open it. Or select
Open in the menu to view marked files.
2. In the DHW Viewer, you can view your DHW files.
 To zoom in or out, press a number key from 1 to 6
for the different zoom level.
 You can also press # or  to zoom in or out.
 To view the next or previous marked DHW file,
select Next Page or Previous Page in the menu.
 According to your phone specification, you can use
the function keys or navigating feature on your
phone to zoom or scroll the page, or browse the
DHW files one by one.
3. If you select the Digital Pad option, your phone will
connect to the digital pad providing Bluetooth mode is
active. Once the connection is established, the
indicator light on the Transmitter changes to a slower,
pulsing light.
Select the DMEMO-M folder for the built-in storage
device. Or select DMEMO-S folder for the optional SD
3
Capture is 2" x 2" (50.8 mm x 50.8 mm) on paper.
The Capture Feature
When you want to save or send via MMS / e-Mail your
DHW file as a picture (JPG), you need to select the
following Capture option:
 Frame Capture — Using this option, you can scroll the
current page until the desired handwritten area is
within the Red Fixed Frame which is shown around
the boundary of your phone screen.
 Auto Capture — The function automatically captures
only your handwriting area from a DHW file as a
picture.
A Picture
A Picture
DHW File
Tip! The Auto Capture can easily reduce the size of
your note or message as a smaller picture.
Tip! Using paper sticky notes and the Auto Capture
feature, you can quickly send a smaller handwritten
MMS / e-Mail. Or you can quickly save your
handwritten notes as smaller pictures to your phone for
viewing or messaging later.
Tip!
4
The minimum range captured by the Auto
DHW File
Tip! The range captured by the Red Fixed Frame is
3" x 3" (76.2mm x 76.2mm) on paper.
Note! The Frame Capture is available only for one
selected or marked file in the DHW File List or the
current page in the DHW Viewer.
 Full Page — Capture the full page of a DHW file as a
picture.
To Send via MMS
To Send via e-Mail
Note! Please first make sure that you can use MMS in
your phone.
Note! Please first make sure that you can use e-Mail in
your phone.
Note! Please make sure the size of MMS message that
you send is within the limits allowed by your wireless
service provider.
The Send via E-mail can attach one or several DHW files
(your handwritten messages) as a JPG (picture), PDF or
DHW format to a newly created e-Mail.
The Send via MMS will capture your DHW file using the
Capture option as a picture (JPG) and insert it into a
newly created MMS. It is available only for one selected or
marked file in the DHW File List or the current page in the
DHW Viewer.
1. In the DHW File List or the DHW Viewer, select Send
via E-mail.
1. In the DHW File List or the DHW Viewer, select Send
via MMS > Auto Capture, Frame Capture or Full
Page / Full Current Page in the menu.
2. For the Auto Capture or Frame Capture, You can
press # or  to zoom in or out on the captured picture.
Then select Send in the menu.
3. A new MMS will be created with your handwritten
message (an inserted picture).
Note! If a new MMS cannot be directly created by the
Send via MMS, your phone does not support this kind of
function. Please refer to the following section on how to
Save to Your Phone. First save your DHW file as a picture
to your phone. Then insert it into a new MMS.
2. Select one of the following file formats for your
handwritten message.
 JPG
Auto Capture — You can press # or  to zoom
the captured picture. You can browse the captured
pictures one by one if you mark several DHW files.
Then select Send in the menu.
Frame Capture — You can press # or  to zoom
the captured picture. Then select Send in the
menu.
Full Page — Attach the selected or marked DHW
files as pictures using this option.
 PDF
All DHW files which you select or mark will be
converted to one PDF file. You can edit the PDF
file name for more than one marked DHW file, and
then select Send.
5
 DHW
Attach the DHW files which you select or mark.
The recipient can download the DigiMemo
Manager for Windows or DigiMemo Express for
Smartphone from the ACECAD website.
http://www.acecad.com.tw
3. For Windows Mobile phone, select the desired e-Mail
account.
4. A new e-Mail will be created with the attachments
(your handwritten messages).
Full Page — Save the selected or marked DHW
files as pictures using this option.
 PDF
All DHW files which you select or mark will be
converted to one PDF file. You can edit the PDF
file name for more than one marked DHW file, and
then select Save.
 DHW
Save the DHW files which you select or mark to
your phone.
To Save to Your Phone
The File name for the Auto and Frame Capture
The Save as can save your DHW files (your handwritten
notes) as a JPG (picture), PDF or DHW format to your
phone for your view or messaging later.
For saved pictures (your handwritten memos) captured by
Auto Capture and Frame Capture, the file name will be
Memo_yymmdd(s).jpg. The yymmdd represents the date.
The (s) represents the serial number from (1) to (999)
during that day.
1. In the DHW File List or the DHW Viewer, select Save
as.
2. Select from the following file formats the one you want
to use to save your handwritten notes to your phone.
 JPG
Auto Capture — Save the selected or marked
DHW files as pictures using this option.
Frame Capture — You can press # or  to zoom
the captured picture. Then select Save in the
menu.
6
The Default Folder for the Saved Files
According to the file format that you select, the default
folders which the files are saved to are listed in the
following:
Note! If you have a memory card inserted in your phone,
the following default folders will be created in the memory
card. If not, the following default folders will be created in
your phone memory.
 JPG
\DigiMemo\My Memo
 PDF
\DigiMemo
 DHW \DigiMemo\My Handwriting (Selecting Phone
Folder in the DigiMemo Express software is to open
the My Handwriting folder.)
Trouble Shooting
Problem: The digital pad and your phone do not connect
through Bluetooth connectivity.
Solution: Please verify the following:
 Turn on Bluetooth connectivity on your phone.
 Turn on the digital pad into Bluetooth mode and
check the indicator light on the Transmitter remains
solidly lit.
Solution: In the DHW file, any digital ink you write will be
captured by the feature. You may have written something
such as a dot or page number which is far away from your
desired handwritten area in the DHW file.
Specifications
Size
1.62" (W) x 0.98" (L) x 0.30" (T)
41.2 mm (W) x 24.8 mm (L) x 7.6 mm (T)
Weight
7.6 g (0.017 lbs)
Power Source
Supplied from the digital pad when connected
Smartphone
Requirements
Based on Symbian S60 3rd / 5th Edition (3.x /
5.x) / UIQ 3.x, or Windows Mobile 5 / 6 with
Bluetooth wireless technology
Digital Notepad
Requirements
ACECAD DigiMemo L2 or A402
 The distance between the digital pad and your phone
is not over 10 meters (33 feet) and there are no walls
or other obstructions between the two devices.
 If you have paired more than one Transmitter (BTX100) with your phone, you must select the right
Transmitter when prompted.
 The Transmitter has paired with your phone.
Problem: When you use the Auto Capture feature, a
large space is beside your desired handwriting area on the
captured picture.
7
Federal Communications Commission (FCC)
Radio Frequency Interference Statement
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
 Reorient or relocate the receiving antenna.
Trademark Information
ACECAD is a registered trademark of ACE CAD
Enterprise Co., Ltd.
The Bluetooth word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use of
such marks by ACE CAD Enterprise Co., Ltd is under
license.
All other trademarks are the property of their respective
owners.
Copyright Notice
© 2009 ACE CAD Enterprise Co., Ltd. All rights reserved.
No part of this publication may be reproduced, stored in a
retrieval system, or transmitted, in any form or by any
means (electronic, mechanical, photocopying, recording,
or otherwise), without the prior written permission of the
publisher.
 Increase the separation between the equipment and
receiver.
 Connect the equipment to an outlet on a circuit
different from that to which the receiver is connected.
 Consult the dealer or an experienced radio/TV
technician for help.
The user should not modify or change this device without
written approval from ACE CAD Enterprise Co., Ltd.
Modification could void authority to use this equipment.
8
Part Number: 91100-40811
English Version v1.20
Printed in Taiwan 2009.09