Back to Basics SM600 Specifications

COMMITTED TO
TOTAL CUSTOMER SATISFACTION
Milwaukee is a dynamic worldwide manufacturer of electrochemical
Instrumentation for water analysis to measure pH, Redox, Conductivity,
Salinity, Dissolved Oxygen, Temperature, Turbidity, Chlorine, Ammonia,
Copper, Chloride, Phosphate, Iron, etc.
Milwaukee serves all markets where water quality measurements are
required: Laboratory market, food and beverage, environmental,
education and government, water and waste water treatment,
pharmaceutical and biotechnology, chemical, agriculture and
horticulture, hydroponics, aquariums, swimming pools, etc.
Thanks to your valuable feedback our R&D team has designed a new line of instruments - Martini Instruments
- for laboratory and field measurements.
Many of our instruments combine 2 or more parameters providing added versatility and excellent value for
money. With an extended range of products, from basic hand held instruments to high performance
laboratory bench meters, Milwaukee products have a reputation for reliability and accuracy.
All of our instruments are supplied with probes, electrode holders, buffer solutions and most come in a hard
carrying case (Martini portable meters and photometers) and are complete and ready for use.
Milwaukee Instruments are available worldwide through a selected network of distributors and associated
companies that are committed to Total Customer Satisfaction.
Everyone in Milwaukee Instruments is committed to exceeding your expectations.
Milwaukee
Instruments, Inc.
Milwaukee
Electronics Kft.
Global Offices
Europe, South America, Africa,
Asia, Middle East and Pacific Rim
United States of America
Milwaukee Electronics Kft.
Milwaukee Instruments, Inc.
Alsókiköto sor 11.
H-6726 Szeged - HUNGARY
tel: +36 62 428 050
fax: +36 62 428 051
e-mail: sales@milwaukeeinst.com
2950 Business Park Drive
Rocky Mount - NC 27804 - U.S.A.
tel: +1 252 443 3630
fax: +1 252 443 1937
e-mail: sales@milwaukeetesters.com
Symbols
CE
CE certified products
IP67
IP67 rated housing protects instrument
from water and dust
Contents
New Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
pH/ORP/ISE/Temp Measurements
pH/Temp Bench Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
pH/ORP/Temp Bench Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
pH/ORP/ISE/Temp Bench Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
GLP (Good Laboratory Practices)
Good Laboratory Practices requires that time and date
should be recorded with the parameters measured
pH Electrodes
pH Electrodes basic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
USB Port
Communication is via opto-isolated USB port
pH/ORP/ISE/Temp Measurements
pH/Temp Portable Meter (Professional) . . . . . . . . . . . . . . . . . . . . .10
pH/ORP/Temp Portable Meter (Professional) . . . . . . . . . . . . . . . . .11
Standard pH/ORP/Temp Portable Meters . . . . . . . . . . . . . . . . . . . .12
pH/ORP/Temp Portable Meters (Economical) . . . . . . . . . . . . . . . . .13
pH/Temp Pocket Testers (Professional) . . . . . . . . . . . . . . . . . . . . .14
pH/ORP/Temp Pocket Testers (Professional) . . . . . . . . . . . . . . . . .15
pH/ORP/Temp Pocket Testers (Economical) . . . . . . . . . . . . . . . . . .16
pH Pocket Testers (Economical) . . . . . . . . . . . . . . . . . . . . . . . . . . .17
pH Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
pH/ORP Controllers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
RS232 Port
Communication via opto-isolated RS232 port
2 Years Warranty
Instruments are covered by 2 years warranty
3 Years Warranty
Instruments are covered by 3 years warranty
7 pH Memorized buffers
7 pH Memorized buffers for calibration
MEM
MEM key allows to memorize
the last measurement
LOG
LOG key allows to save up to 50 measurements
ALARM
A LED light warns the user in the event the reading
is outside the set point
2 Point Calibration
Calibration can be performed at 1 or 2 points
3 Point Calibration
Calibration can be performed at 1, 2 or 3 points
Multiparameter Instruments
Instruments that measure more than 1 parameter
Conductivity/TDS/NaCl/Temp Measurements
EC/TDS/NaCl/Temp Bench Meter . . . . . . . . . . . . . . . . . . . . . . . . . .20
EC/TDS/NaCl/Temp Portable Meter (Professional) . . . . . . . . . . . . .21
Standard EC/TDS Portable Meters . . . . . . . . . . . . . . . . . . . . . . . . .22
EC/TDS Portable Meters (Economical) . . . . . . . . . . . . . . . . . . . . . .23
EC/TDS/Temp Pocket Testers (Professional) . . . . . . . . . . . . . . . . .24
EC/TDS Pocket Testers (Professional) . . . . . . . . . . . . . . . . . . . . . .25
EC/TDS Pocket Testers (Economical) . . . . . . . . . . . . . . . . . . . . . . .26
EC/TDS Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Dissolved Oxygen/Temp Measurements
DO/Temp Bench Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
DO/Temp Portable Meter (Professional) . . . . . . . . . . . . . . . . . . . . .29
Standard DO/Temp Portable Meter . . . . . . . . . . . . . . . . . . . . . . . . .30
DO/Temp Portable Meter (Economical) . . . . . . . . . . . . . . . . . . . . . .31
Multiparameter Measurements
pH/ORP/EC/TDS/NaCl/Temp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bench Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
pH/EC/TDS/Temp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Portable Meters (Professional) . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Standard pH/EC/TDS Portable Meters . . . . . . . . . . . . . . . . . . . . . .34
pH/EC/TDS Portable Meters (Economical) . . . . . . . . . . . . . . . . . . .35
Light Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Automatic Temperature Compensation
Automatically corrects the measured value based
on the temperature of the solution
Auto-Buffer
Auto-Buffer Recognition ensures that correct buffer
values are used during calibration
Colorimetric Measurements
Free, Total Chlorine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
& pH Portable Photometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Ammonia, Iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
& Phosphate Portable Photometers . . . . . . . . . . . . . . . . . . . . . . . .38
Free, Total Chlorine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
& Chloride Portable Photometers . . . . . . . . . . . . . . . . . . . . . . . . . .39
Handy Photometers: Free & Total Chlorine . . . . . . . . . . . . . . . . . .40
Handy Photometers: Phosphate, Iodine, Iron . . . . . . . . . . . . . . . . .41
Dual Level Display
Displays simultaneously 2 parameters
Turbidity Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Manual Temperature Compensation
Is a method for temperature compensation through
the manual input of sample temperature value
Replaceable Electrode
Instrument with replaceable electrode
Software CD
The instrument is supplied with an application software
Self-diagnostics Messages.
Messages on the LCD to make the calibration
easy and accurate
LED
The lightsource is the LED with different wavelengths
Refractometers
Digital Refractometers for Brix, Fructose, Glucose . . . . . . . . . . . . . .
and Invert Sugar Measurements . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Digital Refractometers for Wine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
and Grape Product Measurements . . . . . . . . . . . . . . . . . . . . . . . . .44
Digital Refractometer for Sodium Chloride Measurements . . . . . .45
Digital Refractometer for Seawater Measurements . . . . . . . . . . . .46
Digital Refractometer for Ethylene Glycol Measurements . . . . . . .47
Electrodes & Probes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
NPK Test Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Economical Pocket-Testers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Calibration, Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
& Cleaning Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Highlights
Highlights
in this Catalogue
New
NEW Handy Photometers.
The revolutionary new range of Milwaukee handy photometers
are compact and easy to use, have a modern design, and
measure Free Chlorine (MW10); Total Chlorine (MW11); Phosphate
(MW12); Iodine (MW13) and Iron (MW14). Within a few minutes you can get the
required result on the LCD and the meter automatically turns off after 2 minutes in
order to save the battery life.
New
New Line of MW Portable Meters.
The New MW pH, Conductivity, TDS, Dissolved Oxygen, Lux and Temperature Portable
Meters are designed to provide laboratory results and accuracy even under harsh industrial condition.
This New Line of MW portable meters will suit all budgets and provide the user with flexibility in a wide range
of applications.
All meters are supplied with electrodes, probes or sensors and calibration solutions.
Key features include:
• Faster Microprocessor;
• Smaller & Ergonomic case design;
• Larger and Easier to read Display;
• Easier & Faster to calibrate.
New
Mi180: Multi parameter pH, ORP, Conductivity, TDS,
NaCl and Temperature Bench Meter.
Mi180 measures 6 different parameters: pH, ORP, EC, TDS (Total
Dissolved Solids), percentage of NaCl and temperature in a variety of ranges. pH
calibration can be performed in 3 points selectable between 7 memorized buffers, to provide a very accurate calibration curve even when testing different samples, where very wide
differences in pH can be found.
The auto-ranging feature for EC and TDS measurements automatically sets the resolution
suitable to the tested sample. All measurements can be temperature compensated at 20 or
25°C and the compensation coefficient is selectable by the user. The automatic temperature
compensation can also be disabled for measuring the actual conductivity value.
The stability indicator on the LCD ensures accuracy. Conductivity readings are performed with the 4-ring probe supplied with
the meter. The GLP feature allows users to store and recall data on system status. PC compatible through an RS232 port or USB.
New
MA871: Digital Brix Refractometer.
The MA871 is an optical instrument that employs the measurement of
refractive index to determine the % Brix of sugar in aqueous solutions. The method is both simple and quick. Samples are measured after a
simple user calibration with deionized or distilled water. Within seconds the instrument
measures the refractive index of the sample and converts it to % Brix concentration units.
The MA871 digital refractometer eliminates the uncertainity associated with mechanical refractometers and is easily portable for measurements in the field.
2
www.milwaukeeinst.com
pH/ORP
Mi150
pH/Temperature Laboratory Bench Meter
Mi150 is an advanced pH/Temp microprocessor-based
bench meter. It is ideal for students and technicians who
need fast and reliable measurements.
This meter is provided with a series of new diagnostic features which add an entirely new dimension to the measurement of pH, by allowing the user to dramatically
improve the reliability of the measurement:
• Automatic Temperature Compensation (ATC) for good
accuracy under fluctuating temperatures;
• Easy to read large custom LCD;
• Easy and Quick Push-button Calibration
• 7 memorized buffers (pH 1.68, 4.01, 6.86, 7.01, 9.18,
10.01 and 12.45) for calibration;
• Messages on the LCD to make the calibration easy and
accurate;
• User-selectable “calibration time out” to remind when a
new calibration is necessary;
• Stability Indicator prompts whenever reading stabilizes.
Moreover, it offers an extended temperature
range from –20°C (–4°F) to 120°C (248°F),
using the MA831R interchangeable
temperature probe.
Specifications
Mi150
Range
-2.00 to 16.00 pH
-20.0 to 120.0°C / -4.0 to 248.0°F
0.01 pH
0.1°C (0.1 °F)
±0.01 pH
±0.4°C / ±0.8°F
±0.02 pH
±0.4°C / ±0.8°F
1 or 2 point-calibration, with 7 memorized buffers
±1 pH
from 80 to 108%
automatic, from -20.0 to 120.0°C / -4.0 to 248.0°F
or manual, without temperature probe
MA917B/1 (included)
MA831R (included)
0 to 50°C / 32 to 122°F; max RH 95%
1012 Ohm
12 VDC power adapter (included)
230 x 160 x 95 mm
0.9 kg
pH
Temp
pH
Temp
pH
Temp
pH
Temp
Resolution
Accuracy
(@20°C / 68°F)
Typical EMC
Deviation
pH Automatic Calibration
Offset Calibration
Slope Calibration
Temperature Compensation
pH Electrode
Temperature Probe
Environment
Input Impedance
Power supply
Dimensions
Weight
Accessories
MA9001
MA9004
MA9006
MA9007
MA9009
MA9010
MA9012
MA9015
Glass Electrode
& Temperature
Probe
Choose from our wide
selection of pH and ORP
electrodes at pages 6
and 49.
Innovative Design
Compact-size ergonomic design with electrode holder that
can hold multiple electrodes & probes.
Ordering Information
pH 1.68 buffer solution, 230 mL bottle
pH 4.01 buffer solution, 230 mL bottle
pH 6.86 buffer solution, 230 mL bottle
pH 7.01 buffer solution, 230 mL bottle
pH 9.18 buffer solution, 230 mL bottle
pH 10.01 buffer solution, 230 mL bottle
Refilling solution for double junction
electrode, 230 mL bottle
Electrode storage solution,
230 mL bottle
MA9016
Electrode cleaning solution,
230 mL bottle
MA9112 pH 12.45 buffer solution, 230 mL
bottle
MA9310 12 VDC Adapter, 220 V
MA9311 12 VDC Adapter, 110 V
MA9315 Electrode Holder
MA917B/1 Glass body, double junction refillable
pH electrode
MA831R Temperature probe
www.milwaukeeinst.com
Mi150 is supplied complete with:
• MA917B/1 Double junction refillable pH electrode
• MA831R Temperature Probe
• MA9315 Electrode Holder
• M10004 pH 4.01 Sachet Buffer Solution
• M10007 pH 7.01 Sachet Buffer Solution
• M10010 pH 10.01 Sachet Buffer Solution
• M10016 Sachet Electrode Cleaning Solution
• Graduate Pipet
• 12 VDC Adapter
• Instruction manual
3
pH/ORP
Mi151
pH/ORP/Temperature Laboratory Bench Meter
This high performance economy microprocessor-based
pH/ORP/Temp Bench meter is an ideal tool in schools, laboratories and production plants. It is provided with a series of new
diagnostic features which add an entirely new dimension to the
measurement of pH, by allowing the user to dramatically improve
the reliability of the measurement:
• Automatic Temperature Compensation (ATC) for good accuracy under fluctuating temperatures;
• Hold Function freezes reading for easy viewing;
• Easy to read large custom LCD;
• Stability Indicator prompts whenever reading stabilizes;
• 7 memorized buffers (pH 1.68, 4.01, 6.86, 7.01, 9.18, 10.01
and 12.45) for calibration;
• Messages on the LCD to make the calibration easy and accurate;
• User-selectable “calibration time out” to remind when a new
calibration is necessary.
Mi151 can also measure with ORP electrodes, thanks to its
capability to measure mV with a resolution up to 0.1 mV. For
accurate measurements, use the electrode holder supplied with the meter.
Glass Electrode &
Temperature
Probe
Specifications Mi151
Range
pH
mV
Temp
Resolution
pH
mV
Temp
Accuracy
pH
(@ 20°C)
mV
Temp
Typical EMC
pH
Deviation
mV
Temp
pH Automatic Calibration
Offset Calibration
Slope Calibration
Temperature Compensation
pH Electrode
Temperature Probe
Environment
Input Impedance
Power supply
Dimensions
Weight
-2.00 to 16.00 pH
±699.9 mV / ±1999 mV
-20.0 to 120.0°C / -4.0 to 248.0°F
0.01 pH
0.1 mV / 1 mV
0.1°C (0.1°F)
±0.01 pH
±0.2 mV / ±1 mV
±0.4°C / ±0.8°F
±0.02 pH
±0.2 mV / ±1 mV
±0.4°C / ±0.8°F
1 or 2 point-calibration, with 7 memorized buffers
±1 pH
from 80 to 108%
automatic, from -20.0 to 120.0°C / -4.0 to 248.0°F or manual, without temperature probe
MA917B/1 (included)
MA831R (included)
0 to 50°C / 32 to 122°F; max RH 95%
1012 Ohm
12 VDC power adapter (included)
230 x 160 x 95 mm
0.9 kg
Accessories
MA9001
MA9004
MA9006
MA9007
MA9009
MA9010
MA9012
MA9015
MA9016
MA831R
pH 1.68 buffer solution, 230 mL bottle
pH 4.01 buffer solution, 230 mL bottle
pH 6.86 buffer solution, 230 mL bottle
pH 7.01 buffer solution, 230 mL bottle
pH 9.18 buffer solution, 230 mL bottle
pH 10.01 buffer solution, 230 mL bottle
Refilling solution for double junction
electrode, 230 mL bottle
Electrode storage solution, 230 mL
Electrode cleaning solution, 230 mL
Temperature probe
Choose from our wide
selection of pH and ORP
electrodes at pages 6
and 49.
Custom dual level LCD
Large and easyto-read Custom
dual level LCD
Display
with
simultaneous
readings and with
u s e r- f r i e n d l y
icons.
Ordering Information
MA9112
pH 12.45 buffer solution, 230 mL
bottle
MA9310 12 VDC Adapter, 220 V
MA9311 12 VDC Adapter, 110 V
MA9315 Electrode Holder
MA917B/1 Glass body, double junction refillable
pH electrode
MA921B/1 Platinum ORP electrode with 1 m
cable (will be replaced by SE300)
SE300(*) Platinum ORP electrode with 1 m
cable
Mi151 is supplied complete with:
• MA917B/1 Double junction refillable pH electrode
• MA831R Temperature Probe
• MA9315 Electrode Holder
• M10004 pH 4.01 Sachet Buffer Solution
• M10007 pH 7.01 Sachet Buffer Solution
• M10010 pH 10.01 Sachet Buffer Solution
• M10016 Sachet Electrode Cleaning Solution
• Graduate Pipet
• 12 VDC Adapter
• Instruction manual
(*) Available from the 1st of September 2011
4
www.milwaukeeinst.com
pH/ORP
Mi160
pH/ORP/ISE/Temperature Laboratory Bench Meter
New
This new pH/ORP/ISE/Temp bench meter is ideal for very
accurate and precise measurements for all laboratory
needs. It can perform ion-selective measurements directly in ppm, as well as pH, ORP and temperature measurements. pH calibration can also be performed in 3 points
selectable between 7 memorized buffers, to provide a
very accurate calibration curve even when testing different
samples, where very wide differences in pH can be found.
Thanks to the memory it can store up to 50 data sets for
each range that can be downloaded to a PC via RS232 or
USB. These instruments also have GLP features so, at any
time, the user can recall the calibration data.
• 7 memorized buffers (pH 1.68, 4.01, 6.86, 7.01, 9.18,
10.01 and 12.45) for pH calibration
• pH calibration up to 3 points
• ISE calibration up to 2 points; six standard solutions
available: 0.01, 0.1, 1, 10, 100, 1000 ppm
• Messages on the LCD to make the calibration
easy and accurate
• Relative mV feature
• GLP feature, to view last calibration data
for pH or ISE
Specifications
Mi160
Range
-2.00 to 16.00 pH
±699.9 mV / ±2000 mV
0.001 to 19999 ppm
-20.0 to 120.0°C / -4.0 to 248.0°F
0.01 pH
0.1 mV / 1 mV
0.001 (0.001 to 9.999) ppm; 0.01 (10.00 to 99.99) ppm; 0.1 (100.0 to 999.9) ppm;
1 (1000 to 19999) ppm
0.1°C / 0.1°F
±0.01 pH
±0.2 mV / ±1 mV
±0.5% Full Scale
±0.4°C / ±0.8°F
±2000 mV
1, 2 or 3 point-calibration, with 7 memorized buffers
1 or 2 point calibration, 6 standard solutions available
automatic, from -20.0 to 120.0°C / -4.0 to 248.0°F or manual, without temperature probe
MA917B/1 (included)
MA831R (included)
0 to 50°C / 32 to 122°F; max RH 95%
1012 Ohm
12 VDC power adapter (included)
230 x 160 x 95 mm
1.1 kg
Resolution
Accuracy
(@20°C)
pH
mV
ISE
Temp
pH
mV
ISE
Temp
pH
mV
ISE
Temp
Rel mV offset
pH Calibration
ISE Calibration
Temperature Compensation
pH Electrode
Temperature Probe
Environment
Input Impedance
Power Supply
Dimensions
Weight
Accessories
MA9004
MA9007
MA9010
MA9015
MA9016
MA9112
MA831R
MA9310
MA9311
MA9315
Easy PC
Compatibility
RS232 or USB communication
interface allows readings to be
downloaded to a serial port.
Rear Connector Panel layout
Communication to the PC is done via opto-isolated USB
and RS232 ports.
Ordering Information
pH 4.01 buffer solution, 230 mL bottle
pH 7.01 buffer solution, 230 mL bottle
pH 10.01 buffer solution, 230 mL bottle
Electrode storage solution, 230 mL
Electrode cleaning solution, 230 mL
pH 12.45 buffer solution, 230 mL
bottle
Temperature probe
12 VDC Adapter, 220 V
12 VDC Adapter, 110 V
Electrode Holder
MA917B/1Glass body, double junction refillable
pH electrode
MA921B/1 Platinum ORP electrode with 1 m
cable (will be replaced by SE300)
SE300(*) Platinum ORP electrode with 1 m
cable
MA9350 RS232 connection cable with
2 m cable
Mi5200
Application Software
(*) Available from the 1st of September 2011
www.milwaukeeinst.com
Mi160 is supplied complete with:
• MA917B/1 Double junction refillable pH electrode
• MA831R Temperature Probe
• MA9315 Electrode Holder
• M10004 pH 4.01 Sachet Buffer Solution
• M10007 pH 7.01 Sachet Buffer Solution
• M10010 pH 10.01 Sachet Buffer Solution
• M10016 Sachet Electrode Cleaning Solution
• Mi5200 Application Software
• MA9350 RS232 connection cable with 2 meters cable
• Graduate Pipet, 12 VDC Adapter & Instruction manual
5
pH Electrodes
pH Electrode
basics
pH electrodes are constructed from a special composition
glass which senses the hydrogen ion concentration. This
glass is typically composed of alkali metal ions. The alkali
metal ions of the glass and the hydrogen ions in solution
undergo an ion exchange reaction, generating a potential
difference. In a combination pH electrode, the most widely
used variety, there are actually two electrodes in one body.
One portion is called the measuring electrode, the other the
reference electrode. The potential generated at the junction
site of the measuring portion is due to the free hydrogen
ions present in solution.
The potential of the reference portion is produced by the
internal element in contact with the reference fill solution.
This potential is always constant. In summary, the measuring electrode delivers a varying voltage and the reference
electrode delivers a constant voltage to the meter. The voltage signal produced by the pH electrode is a very small,
high impedance signal. The input impedance requires to be
interfaced only with equipment with high impedance circuits.
M
19 B /1 =1 m
M
• Glass body electrode versus Epoxy (plastic)
body electrode: Glass body electrodes stand
higher temperatures (typically 100°C against 80°C
for plastic) and are more resistant to corrosive
chemicals and solvents. They are easier to clean
and are available in different shapes depending on
the application. On the other hand plastic body
electrodes are more rugged and the glass bulb is
better protected.
120 mm
A9
120 mm
Milwaukee has a wide assortment of pH and ORP electrodes to meet all your specific requirements. Finding
the right electrode for a specific application is a very
important task and in order to solve this selection problem it is important to consider the following:
• Gel filled electrodes versus refillable electrodes:
refillable electrodes last longer since electrolyte
can be changed for repeated usage. The
response is faster due to a greater outflow of electrolyte into the sample and therefore less likely to
clog. Gel filled electrodes require less maintenance and resist to higher pressure.
8 mm
8 mm
• Double reference junction versus Single junction reference: Double junction reference electrodes have a longer life and protects the sample
measured from silver contamination from the electrolyte. The Silver wire is more protected and
therefore gets less contaminated. The single junction electrodes normally cost less and are ideal for
general purpose applications
• Conic shaped versus Sphere shaped: The
conic-shaped electrode is easier to clean and to
maintain (ideal for applications such as dairy). Has
a more rugged tip and therefore ideal for penetration. The sphere-shaped has a faster response
time due to the larger surface area on the bulb.
6
A9
Model
MA919B/1
MA924B/1
Measuring Range
Temperature Range
Shaft material
Reference Electrolyte
Reference Type
Reference Junction
Shape of membrane
Max. Pressure
Connector type
Cable length
Shaft length
Diameter
Application
0 to 13 pH
-5 to 80 °C
glass
KCL 3.5M
double Ag/AgCl
open open
spheric
0,1 bar
BNC
coaxial 1 meter
120 mm
8 mm
food laboratory
±2000 mV
-5 to 80 °C
glass
KCL 3.5M
double Ag/AgCl
Platinum ring
0,1 bar
BNC
coaxial 1 meter
120 mm
8 mm
food laboratory
www.milwaukeeinst.com
24 B /1 =1 m
pH Electrodes
pH Electrode
basics
The pH electrode, due to the nature of its construction,
needs to be kept moist at all times. In order to operate properly, glass needs to be hydrated. Hydration is required for
the ion exchange process to occur. If an electrode should
become dry, it is best to place it in some tap water for half
an hour to condition the glass.
pH electrodes are like batteries; they run down with time and
use. As an electrode ages, its glass changes resistance.
This resistance change alters the electrode potential. For
this reason, electrodes need to be calibrated on a regular
basis. Calibration in pH buffer solution corrects for this
change. Calibration of any pH equipment should always
begin with buffer 7.0 as this is the "zero point." The pH scale
has an equivalent mV scale. The mV scale ranges from
+420 to -420 mV. At a pH of 7.0 the mV value is 0. Each pH
change corresponds to a change of approx. ±60 mV. As pH
values become more acidic the mV values become greater.
pH electrodes have junctions which allow the internal electrolyte solution of the measuring electrode to leak out into
the solution being measured.
Glass Conic Tip Sensor
Glass Spheric Sensor
Epoxy Electrode
MA916B/1 (will be
replaced by SE100)
M
M
17 B /1 =1 m
120 mm
16 B /1 =1 m
/3 =3 m
A9
120 mm
A9
120 mm
M
12 mm
12 mm
12 mm
A9
18 B /1 =1 m
Model
MA916B/1 - MA916B/3
MA917B/1
MA918B/1
Measuring Range
Temperature Range
Shaft Material
Reference Electrolyte
Reference Junction
Reference Type
Shape of membrane
Max pressure
Connector Type
Cable length
Shaft length
Diameter
Application
0 to 13 pH
-5 to 100°C (23 to 212°F)
glass
KCl 3.5M + AgCl
ceramic, single
single, Ag/AgCl
spheric
0.1 bar
BNC
coaxial, 1 or 3 m
120 mm
12 mm
laboratory applications
0 to 14 pH
0 to 100°C (32 to 212°F)
glass
KCl 3.5M
ceramic, single
double, Ag/AgCl
spheric
0.1 bar
BNC
coaxial, 1 m
120 mm
12 mm
laboratory applications
0 to 12 pH
-5 to 100°C (23 to 212°F)
glass
KCl 3.5M + AgCl
ceramic, triple
single, Ag/AgCl
conic
0.1 bar
BNC
coaxial, 1 m
120 mm
12 mm
laboratory applications
www.milwaukeeinst.com
7
pH Electrodes
pH Electrode
basics
Single Junction
Electrode
Double Junction
Electrode
This junction can become clogged by particulates in the
solution and can also facilitate poisoning by metal ions present in the solution. If a clogged junction is suspected it is
best to soak the electrode in tap water to dissolve the material and clear the junction. When not in use it is best to store
the electrode in either buffer 4.0 or buffer 7.0. Never store an
electrode in distilled or deionized water as this will cause
migration of the electrolyte solution from the electrode.
Inner Tube
Housing the
Membrane
Sensing Wire
Electrolyte
Containing
Silver
Inner
Ceramic
Junction
Silver-Free
Electrolyte
Outer
Ceramic
Junction
M
A9
Silver
Silver/Chloride
Reference
Wire
How long a pH electrode will last will depend on how it is
cared for and the solutions it is used to measure. Typically, a
gel-filled combination pH electrode will last six months to 1
year depending on the care and application.
How long an electrode will last is determined by how well the
probe is maintained and the pH application. The harsher the
system, the shorter the lifespan. For this reason it is always
a good idea to have a back-up electrode on hand to avoid
any system down time. Calibration is also an important part
of electrode maintenance. This assures not only that the
electrode is behaving properly but that the system is operating correctly.
Ceramic
Junction
15 B /2 =2 m
/3 =3 m
M
A9
20 B /1 =1 m
M
A9
91 B /1 =1 m
75 mm
75 mm
120 mm
MA991B/1 (will be
replaced by SE120)
12 mm
6 mm
12 mm
Model
MA915B/2 - MA915B/3
MA920B/1
MA991B/1
Measuring Range
Temperature Range
Shaft Material
Reference Electrolyte
Reference Junction
Reference Type
Shape of membrane
Max pressure
Connector Type
Cable length
Shaft length
Diameter
Application
0 to 13 pH
-5 to 95°C
glass
polymer
ground glass
double, ground glass
spheric
3 bar
BNC
2 or 3 m
75 mm
12 mm
industrial applications
0 to 12 pH
0 to 50°C (32 to 122°F)
PVDF
Viscolene
open
single, Ag/AgCl
conic
0.1 bar
BNC
coaxial, 1 m
75 mm
6 mm
laboratory applications
0 to 13 pH
-5 to 100°C (23 to 212°F)
glass
KCl 3.5M
ceramic, single
single, Ag/AgCl
spheric
0.1 bar
BNC
coaxial, 1 m
più di 120 mm
12 mm
laboratory applications
8
www.milwaukeeinst.com
pH Electrodes
pH Electrode
basics
Temperature compensation: When measuring pH using a
pH electrode the temperature error from the electrode varies
based on the Nernst Equation as 0.03pH/10C/unit of pH
away from pH7. The error due to temperature is a function
of both temperature and the pH being measured.
Temperature compensation can be achieved manually or
automatically. Manual temperature compensation is usually
achieved by entering the temperature of the fluid being
measured into the instruments menu and then the instrument will display a "Temperature Compensated" pH reading.
This means that the temperature is corrected to the value
expected at 25 Deg C. Automatic temperature compensation requires input from a temperature sensor and constantly sends a compensated pH signal to the display. Automatic
temperature compensation is useful for measuring pH in
systems with wide variations in temperature.
M
M
13 B /3 =3 m
A9
120 mm
05 B /3 =3 m
A9
120 mm
A9
BNC Connector
120 mm
M
DIN Connector
22 mm
12 mm
12 mm
23 B /3 =3 m
Model
MA905B/3
MA913B/3
MA923B/3
Measuring Range
Temperature Range
Shaft Material
0 to 13 pH
-5 to 95°C
Reference Electrolyte
polymer
double, Teflon
0 to 13 pH
0 to 60°C (32 to 140°F)
Epoxy
gel
ceramic, single
single, Ag/AgCl
spheric
2 bar
BNC
coaxial, 3 m
120 mm
12 mm
water, waste water
±1999 mV
0 to 80°C (32 to 176°F)
Epoxy
gel
cloth
single, Ag/AgCl
spheric
pH: conic / ORP: Platinum sensor
3 bar
DIN
7-pole, 1 m
120 mm
14 mm
water, waste water
Reference Junction
Reference Type
Shape of membrane
Max pressure
Connector Type
Cable length
Shaft length
Diameter
Application
6 bar
3/4” NPT - BNC
3m
120 mm
22 mm
industrial applications
www.milwaukeeinst.com
9
pH/ORP
Mi105
Portable pH/Temp Meter
Extended Range pH and Temperature Meter in a compact casing
The included electrode has a built-in temperature sensor
and amplifier to prevent electrical interference.
The large display shows readings in an extended range from
-2.00 to 16.00 pH and simultaneously shows temperature
from -5.0 to 105.0°C or 23 to 221°F.
The Mi105 has a stability indicator and hold feature that
freezes the display for easy and accurate recording. The
large display also has graphic symbols to guide you through
all operations. The battery life of the meters guarantees over
500 hours of continuous use.
When switched ON it performs a self-check and displays the
percentage of the remaining battery level to assure proper
working condition. Calibration is performed automatically at
1 or 2 points using standard or NIST buffers.
Specifications
Mi105
Range(*)
-2.00 to 16.00 pH
-5.0 to 105.0°C / 23.0 to 221.0°F
0.01 pH
0.1 °C / 0.1 °F
±0.02 pH
±0.5°C up to 60°C; ±1°C outside / ±1°F up to 140°F; ±2°F outside
±0.02 pH
±0.2°C / ±0.4°F
automatic, from -5 to 80°C
automatic, 1 or 2 points
MA914BR/1, amplified pH/temperature probe (included)
0 to 50°C / 32 to 122°F; max RH 100%
1 x 9V alkaline (included)
approx. 500 hours of use
after 8 minutes of non-use
200×85×50 mm
260 g (with battery)
pH
Temp
Resolution
pH
Temp
Accuracy
pH
(@25°C)
Temp
Typical EMC
pH
Deviation
Temp
Temperature Compensation
pH Calibration
Probe
Environment
Battery Type
Battery Life
Auto-off
Dimensions
Weight
Calibration, Maintenance & Cleaning
Solutions
Choose from our wide selection of calibration, maintenance and cleaning solutions at page 53.
(*) The temperature range is limited to 80°C (176°F) if using the MA914BR/1 probe.
Accessories
MA914BR/1 Combination amplified pH/Temp
SE240(*)
M10004B
M10006B
M10007B
M10009B
10
probe with BNC & RCA connectors
and 1 m cable (will be replaced
by SE240)
Combination amplified pH/Temp
probe with BNC & RCA
connectors and 1 m cable
pH 4.01 buffer solution 20 mL
sachet (25 pcs)
pH 6.86 buffer solution 20 mL
sachet (25 pcs)
pH 7.01 buffer solution 20 mL
sachet (25 pcs)
pH 9.18 buffer solution 20 mL
sachet (25 pcs)
Ordering Information
M10010B pH 10.01 buffer solution, 20 mL
sachet (25 pcs)
MA9004 pH 4.01 buffer solution, 230 mL bottle
MA9006 pH 6.86 buffer solution, 230 mL bottle
MA9007 pH 7.01 buffer solution, 230 mL bottle
MA9009 pH 9.18 buffer solution, 230 mL bottle
MA9010 pH 10.01 buffer solution, 230 mL bottle
MA9015 Electrode storage solution, 230 mL
MA9016 Electrode cleaning solution, 230 mL
M10000B Electrode rinse solution, 20 mL
(25 pcs)
Mi105 is supplied complete with MA914BR/1 pH/Temp
amplified probe with 1 meter cable, 20 mL pH 4.01 and
7.01 sachet of calibration solution, 2x20 mL sachet of electrode cleaning solutions, 9V battery and instructions, all in
a rugged carrying case.
(*) Available from the 1st of September 2011
www.milwaukeeinst.com
pH/ORP
Mi106
Portable pH/ORP/Temp Meter
Extended Range pH/ORP/Temperature Meter
The Mi106 multi parameter portable meter is ideal for field
measurements.
The included combined pH/ORP electrode has a built-in
temperature sensor and amplifier to prevent electrical
interference.
The large display shows readings in an extended range
from -2.00 to 16.00 pH or ±2000 mV and simultaneously
shows temperature from -5.0 to 105.0°C or 23 to 221°F.
The Mi106 has a stability indicator and hold feature that
freezes the display for easy and accurate recording.
The large display also has graphic symbols to guide you
through all operations.
When switched ON it performs a self-check and displays
the percentage of the remaining battery level to assure
proper working condition.
Calibration is performed automatically at 1 or 2 points
using standard or NIST buffers.
Hard Carrying Case
Specifications
Mi106
Range (*)
-2.00 to 16.00 pH
-2000 to +2000 mV
-5.0 to 105.0°C / 23.0 to 221.0°F
0.01 pH
1 mV
0.1°C / 0.1°F
±0.02 pH
±2 mV
±0.5°C up to 60°C; ±1°C outside / ±1°F up to 140°F; ±2°F outside
±0.02 pH
±2 mV
±0.2°C / ±0.4°F
automatic, from -5 to 80°C / 23 to 176°F
automatic, 1 or 2-point
factory calibrated
MA923D/1, amplified pH/ORP/temperature probe (included)
0 to 50°C / 32 to 122°F; max RH 95%
1 x 9V alkaline (included)
approx. 500 hours of use
after 8 minutes of non-use
200 × 85 × 50 mm
260 g (with battery)
pH
mV
Temp
Resolution
pH
mV
Temp
Accuracy (@25°C)
pH
mV
Temp
Typical EMC Deviation
pH
mV
Temp
Temperature Compensation
pH Calibration
ORP Calibration
Probe
Environment
Battery Type
Battery Life
Auto-off
Dimensions
Weight
Each meter is supplied in a hard carrying case ideal for
field measurements.
(*) The temperature range is limited to 80°C (176°F) if using the MA923D/1 probe.
Accessories
MA923D/1 Combination amplified
pH/ORP/Temp probe with DIN
connector and 1 m cable
(will be replaced by SE260)
SE260(*) Combination amplified
pH/ORP/Temp probe with DIN
connector and 1 m cable
M10004B pH 4.01 buffer solution 20 mL
sachet (25 pcs)
M10006B pH 6.86 buffer solution 20 mL
sachet (25 pcs)
M10007B pH 7.01 buffer solution 20 mL
sachet (25 pcs)
Ordering Information
M10009B pH 9.18 buffer solution 20 mL
sachet (25 pcs)
M10010B pH 10.01 buffer solution 20 mL
sachet (25 pcs)
MA9004 pH 4.01 buffer solution, 230 mL bottle
MA9007 pH 7.01 buffer solution, 230 mL bottle
MA9015 Electrode storage solution, 230 mL
MA9016 Electrode cleaning solution, 230 mL
M10000B Electrode rinse solution, 20 mL
sachet (25 pcs)
Mi106 is supplied complete with MA923D/1
pH/ORP/Temp amplified probe with 1 meter cable, 20 mL
pH 4.01 and 7.01 sachet of calibration solution, 2x20 mL
sachet of electrode cleaning solutions, 9V battery, instructions, all in a rugged carrying case.
(*) Available from the 1st of September 2011
www.milwaukeeinst.com
11
pH/ORP
MW100/MW101/MW102/MW500
Entry level, inexpensive pH/ORP/Temperature Portable
Meters for fast and reliable results
New
MW100, MW101, MW102 and MW500 are compact pH,
ORP and Temperature Portable Meters with Faster Micro
Processor. These handy and ergonomically designed
portable meters are ideal for anyone working on a low budget and still requires fast and reliable measurements.
These portable meters are suitable for a wide range of applications, such as Educational, Agriculture and Horticulture,
as well as water and environmental analysis.
These easier and faster to calibrate portable meters have a
smaller, ergonomic and lighter case design. Other features
include 100% larger and easier to read LCD Display and
long battery life.
All meters are supplied with pH or ORP electrodes and calibration solutions.
• MW100 performs pH measurements with a 0.1 pH resolution and with manual temperature compensation.
• MW101 performs pH measurements with a 0.01 pH resolution and with manual temperature compensation.
• MW102 is a microprocessor based pH/Temperature
meter with extended range (-2.00 to 16.00 pH), Automatic
Temperature Compensation, automatic calibration in 2
points and ±0.02 pH accuracy.
• MW500 performs ORP measurements with a range of
±1000 mV.
Specifications
Range
pH/ORP
Temp
Resolution
pH/ORP
Temp
Accuracy
pH/ORP
(@25°C)
Temp
Typical EMC
pH
Deviation
Temp
Temperature Compensation
Calibration
pH Electrode
ORP Electrode
Temperature Probe
Environment
Battery Type
Battery Life
Auto-off
Dimensions
Weight
MW100
MW101
MW102
MW500
pH Meter
pH Meter
pH/Temp Meter
ORP Meter
0.0 to 14.0 pH
0.00 to 14.00 pH
±1000 mV
0.1 pH
0.01 pH
±0.2 pH
±0.02 pH
manual, 0 to 50°C
manual, 2-point through
offset and slope trimmers
SE220 (included)
manual, 0 to 50°C
manual, 2-point through
offset and slope trimmers
SE220 (included)
-2.00 to 16.00 pH
-5 to 70°C
0.01 pH
0.1°C
±0.02 pH
±0.5°C
±0.02 pH
±0.5°C
automatic, 0 to 70°C
automatic, at 1 or 2 points
±5 mV
SE220 (included)
SE300 (included)
0 to 50°C, max RH 95%
1 x 9V alkaline (included)
approx. 300 hours of use
0 to 50°C, max RH 95%
1 x 9V alkaline (included)
approx. 300 hours of use
145 x 80 x 40 mm
220 g (with battery)
145 x 80 x 40 mm
220 g (with battery)
MA830R (included)
0 to 50°C; max RH 95%
1 x 9V alkaline (included)
approx. 300 hours of use
after 8 minutes of non-use
145 x 80 x 40 mm
220 g (with battery)
Accessories
M10004B pH 4.01 buffer solution 20 mL
sachet (25 pcs)
M10007B pH 7.01 buffer solution 20 mL
sachet (25 pcs)
M10010B pH 10.01 buffer solution 20 mL
sachet (25 pcs)
MA9004 pH 4.01 buffer solution, 230 mL bottle
MA9007 pH 7.01 buffer solution, 230 mL bottle
MA9015 Electrode storage solution, 230 mL
MA9016 Electrode cleaning solution, 230 mL
MA830R Temperature probe
12
1 mV
0 to 50°C; max RH 95%
1 x 9V alkaline (included)
approx. 300 hours of use
145 x 80 x 40 mm
220 g (with battery)
Ordering Information
MA9020
200-275 mV ORP solution, 230 mL
bottle
SE220
pH electrode with BNC connector
and 1 m cable
SE300
Platinum ORP electrode with 1 m
cable
MA911B/1 pH electrode with BNC connector and
1 m cable (will be replaced by SE220)
MA921B/1 Platinum ORP electrode with 1 m
cable (will be replaced by SE300)
MW100 and MW101 are supplied complete with a SE220
pH electrode, pH 7.01 20 mL sachet of calibration solution,
calibration screwdriver, 9V battery and instructions.
MW102 is supplied complete with a SE220 pH electrode,
MA830R stainless steel temperature probe, pH 4.01 and
pH 7.01 20 mL sachet of calibration solution, 9V battery
and instructions.
MW500 is supplied complete with a SE300 platinum electrode, 9V battery and instructions.
www.milwaukeeinst.com
pH/ORP
SM100/SM101/SM102/SM500
Portable pH/ORP/Temp Meters
Smart portable meters with no frills!
Milwaukee’s low cost durable meters for quick and reliable
measurements.
Milwaukee’s Smart meters are manufactured to be easy to
use, practical and accurate. Ideal for the classroom, laboratory or for general field use.
• SM100 performs pH measurements with a 0.1 pH resolution and with manual temperature compensation.
• SM101 performs pH measurements with a 0.01 pH resolution and with manual temperature compensation.
• SM102 is a microprocessor based pH/Temperature meter
with extended range (-2.00 to 16.00 pH), Automatic
Temperature Compensation, automatic calibration in 2
points and ±0.02 pH accuracy.
• SM500 performs ORP measurements with a range of
±1000 mV.
All meters are supplied with pH or ORP electrodes and calibration solutions.
Specifications
Range
pH/ORP
Temp
Resolution
pH/ORP
Temp
Accuracy
pH/ORP
(@25°C)
Temp
Typical EMC
pH
Deviation
Temp
Temperature Compensation
Calibration
pH Electrode
ORP Electrode
Temperature Probe
Environment
Battery Type
Battery Life
Auto-off
Dimensions
Weight
SM100
SM101
SM102
SM500
pH Meter
pH Meter
pH/Temp Meter
ORP Meter
0.0 to 14.0 pH
0.00 to 14.00 pH
±1000 mV
0.1 pH
0.01 pH
±0.2 pH
±0.02 pH
manual, 0 to 50°C
manual, 2-point through
offset and slope trimmers
MA911B/1 (included)
manual, 0 to 50°C
manual, 2-point through
offset and slope trimmers
MA911B/1 (included)
-2.00 to 16.00 pH
-5 to 70°C
0.01 pH
0.1°C
±0.02 pH
±0.5°C
±0.02 pH
±0.5°C
automatic, 0 to 70°C
automatic, at 1 or 2 points
1 mV
±5 mV
MA911B/1 (included)
MA921B/1 (included)
0 to 50°C, max RH 95%
1 x 9V alkaline (included)
approx. 300 hours of use
0 to 50°C, max RH 95%
1 x 9V alkaline (included)
approx. 300 hours of use
145 x 80 x 40 mm
220 g (with battery)
145 x 80 x 40 mm
220 g (with battery)
Accessories
MA830R (included)
0 to 50°C; max RH 95%
1 x 9V alkaline (included)
approx. 300 hours of use
after 8 minutes of non-use
145 x 80 x 40 mm
220 g (with battery)
0 to 50°C; max RH 95%
1 x 9V alkaline (included)
approx. 300 hours of use
145 x 80 x 40 mm
220 g (with battery)
Ordering Information
M10004B pH 4.01 buffer solution 20 mL
sachet (25 pcs)
M10007B pH 7.01 buffer solution 20 mL
sachet (25 pcs)
MA9004 pH 4.01 buffer solution, 230 mL bottle
MA9007 pH 7.01 buffer solution, 230 mL bottle
MA9015 Electrode storage solution, 230 mL
MA9016 Electrode cleaning solution, 230 mL
MA9020 200-275 mV ORP solution, 230 mL
bottle
MA830R Temperature probe
SE220
pH electrode with BNC connector
and 1 m cable
SE300
pH electrode with BNC connector
and 1 m cable
MA911B/1 pH electrode with BNC connector
and 1 m cable (will be replaced
by SE220)
MA921B/1 Platinum ORP electrode with 1 m
cable (will be replaced by SE300)
www.milwaukeeinst.com
SM100 and SM101 are supplied complete with a
MA911B/1 pH electrode, pH 7.01 20 mL sachet of calibration solution, calibration screwdriver, 9V battery and
instructions.
SM102 is supplied complete with a SE220 pH electrode,
MA830R stainless steel temperature probe, pH 4.01 and
pH 7.01 20 mL sachet of calibration solution, 9V battery
and instructions.
SM500 is supplied complete with a SE300 platinum electrode, 9V battery and instructions.
13
pH/ORP
pH55/pH56
Pocket-size pH/Temperature Meters
with replaceable electrode
IP67 Waterproof pH testers with Large dual-level LCD that
displays pH and temperature (°C or °F).
The large display shows readings in an extended range from
-2.0 to 16.0 pH (pH56 has a 0.01 pH resolution) and simultaneously shows temperature from -5.0 to 105.0°C or 23.0 to
221.0°F.
They have a stability indicator and hold function that freezes
the display for easy and accurate recording.
The large display also has graphic symbols to guide you
through all operations.
Complete with a temperature probe for faster and more precise temperature measurement they compensate automatically for temperature.
Calibration is made automatically in 1 or 2 points with
memorized standard and NIST buffer sets. Auto power OFF
saves battery power after non-use.
The double-junction electrode can be replaced in a very fast
and simple way!
The modular design allows easy electrode and battery
replacement.
Temperature Sensor
Specifications
Range
Resolution
Accuracy
(@25°C)
Typical EMC
Deviation
Calibration
pH
Temp
pH
Temp
pH
Temp
pH
Temp
Temperature Compensation
Probe
Environment
Battery Type
Battery Life
Auto-off
Dimensions
Weight
pH55
pH56
-2.0 to 16.0 pH
-5.0 to 60.0°C / 23.0 to 140.0°F
0.1 pH
0.1°C / 0.1°F
±0.1 pH
±0.5°C / ±1°F
±0.1 pH
±0.3°C / ±0.6°F
automatic, 1 or 2 points
with 2 sets of memorized buffers
(pH 4.01, 7.01, 10.01
or 4.01, 6.86, 9.18)
automatic, from -5 to 60°C
Mi56P (replaceable)
-5 to 50°C / 32 to 122°F; max RH 100%
4 x 1.5V; IEC LR44, A76 (included)
approx. 300 hours of use
after 8 minutes of non-use
200 x dia 38 mm
100 g
-2.00 to 16.00 pH
-5.0 to 60.0°C / 23.0 to 140.0°F
0.01 pH
0.1°C / 0.1°F
±0.05 pH
±0.5°C / ±1°F
±0.02 pH
±0.3°C / ±0.6°F
automatic, 1 or 2 points
with 2 sets of memorized buffers
(pH 4.01, 7.01, 10.01
or 4.01, 6.86, 9.18)
automatic, from -5 to 60°C
Mi56P (replaceable)
-5 to 50°C / 32 to 122°F; max RH 100%
4 x 1.5V; IEC LR44, A76 (included)
approx. 300 hours of use
after 8 minutes of non-use
200 x dia 38 mm
100 g
Accessories
Mi56P
Replaceable electrode for pH55
& pH56
M10004B pH 4.01 buffer solution 20 mL
sachet (25 pcs)
M10007B pH 7.01 buffer solution 20 mL
sachet (25 pcs)
M10010B pH 10.01 buffer solution 20 mL
sachet (25 pcs)
MA9004 pH 4.01 buffer, 230 mL bottle
14
The pH55 and
pH56’s exposed
temperature sensor
provides
fast
response time, and
its proximity to the
pH electrode guarantees much more
accurate temperature
compensated readings.
Replaceable electrode
Replace the electrode in a fast and simple way yourself!
Just unscrew the plastic ring on the top of the electrode and replace the electrode with a
new one.
Ordering Information
MA9006
MA9007
MA9009
MA9010
MA9015
MA9016
M10000B
pH 6.86 buffer solution, 230 mL bottle
pH 7.01 buffer solution, 230 mL bottle
pH 9.18 buffer solution, 230 mL bottle
pH 10.01 buffer solution, 230 mL bottle
Electrode storage solution, 230 mL
Electrode cleaning solution, 230 mL
Electrode rinse solution, 20 mL
sachet (25 pcs)
pH55 is supplied complete with protective cap, 20 mL,
pH 4.01 and pH 7.01 sachets of calibration solution, carton box, batteries and instructions.
pH56 is supplied complete with protective cap, 20 mL pH
4.01 and pH 7.01 sachets of calibration solution, carton
box, batteries and instructions.
www.milwaukeeinst.com
pH/ORP
ORP57/pH58
Pocket-size pH/ORP/Temperature Meters
with replaceable electrode
Combination waterproof testers with advanced functions
also include the new model pH58 for simultaneous pH and
ORP measurements and temperature, which is continuously displayed on the dual level LCD.
It shows readings in an extended range from -2.00 to 16.00
pH or ±1000 mV and simultaneously shows temperature
from -5.0 to 105.0°C or 23 to 221°F.
The pH58 has a stability indicator and hold feature that
freezes the display for easy and accurate recording.
The large display also has graphic symbols to guide you
through all operations.
Calibration is performed automatically at 1 or 2 points using
standard or NIST buffers.
The modular design allows easy electrode and battery
replacement.
Replaceable combination
pH/ORP electrode for pH58
Specifications
ORP57
Range
Resolution
Accuracy
(@25°C)
Typical EMC
Deviation
pH
ORP
Temp
pH
ORP
Temp
pH
ORP
Temp
pH
ORP
Temp
pH58
±1000 mV
-5.0 to 60.0°C / 23.0 to 140.0°F
1 mV
0.1°C / 0.1°F
±2 mV
±0.5°C / ±1°F
±2 mV
±0.3°C / ±0.6°F
pH Calibration
ORP Calibration
Probe
Environment
Battery Type
Battery Life
Auto-off
Dimensions
Weight
factory calibrated
Mi57P (replaceable)
0 to 50°C; max RH 100%
4 x 1.5V; IEC LR44, A76
approx. 300 hours of use
after 8 minutes of non-use
200 x dia 38 mm
100 g
-2.00 to 16.00 pH
±1000 mV
-5.0 to 60.0°C / 23.0 to 140.0°F
0.01 pH
1 mV
0.1°C / 0.1°F
±0.05 pH
±2 mV
±0.5°C / ±1°F
±0.02 pH
±2 mV
±0.3°C / ±0.6°F
automatic for pH, 1 or 2 points, from -5 to
60°C with 2 sets of memorized buffers
(pH 4.01, 7.01, 10.01 or 4.01, 6.86, 9.18)
factory calibrated
Mi58P (replaceable)
-5 to 50°C; max. RH 100%
4 x 1.5V; IEC LR44, A76
approx. 250 hours of use
after 8 minutes of non-use
200 x dia 38 mm
100 g
Accessories
Replace the electrode in a fast and
simple way yourself! Just
unscrew the plastic ring on
the top of the electrode and
replace the electrode
with a new one.
Calibrations, Maintenance & Cleaning
Solutions
Choose from our wide selection of calibration, maintenance and cleaning solutions at page 53.
Ordering Information
Mi57P
Replaceable electrode for ORP57
Mi58P
Replaceable electrode for pH58
M10004B pH 4.01 buffer solution 20 mL
sachet (25 pcs)
M10007B pH 7.01 buffer solution 20 mL
sachet (25 pcs)
M10010B pH 10.01 buffer solution 20 mL
sachet (25 pcs)
MA9004 pH 4.01 buffer solution, 230 mL bottle
MA9006
MA9007
MA9009
MA9010
MA9015
MA9016
MA9020
pH 6.86 buffer solution, 230 mL bottle
pH 7.01 buffer solution, 230 mL bottle
pH 9.18 buffer solution, 230 mL bottle
pH 10.01 buffer solution, 230 mL bottle
Electrode storage solution, 230 mL
Electrode cleaning solution, 230 mL
ORP test solution (200/275 mV),
230 mL bottle
M10000B Electrode rinse solution, 20 mL
sachet (25 pcs)
www.milwaukeeinst.com
ORP57 is supplied complete with protective cap, carton
box, batteries and instructions.
pH58 is supplied complete with protective cap, 20 mL pH
4.01 and pH 7.01 sachets of calibration solution, carton
box, batteries and instructions.
15
pH/ORP
pH51/pH52/pH53/ORP50
Microprocessor Waterproof pH/ORP/Temp Meters
Sharp waterproof Testers are designed for all applications.
Their IP67 waterproof casings and double junction
replaceable electrodes make them suitable also for heavy
duty applications, such as wastewater treatment and agriculture.
The modular design allows easy electrode and battery
replacement.
Manual calibration on the pH51 prolongs the battery life
up to 1500 hours.
pH51 and pH52 have a 0.1 pH resolution while pH53 has
0.01 pH resolution.
ORP50 reads ORP with a resolution of 1 mV.
Choose your pH, ORP, Temp tester according to the proper
pH, ORP, Temp ranges for your application:
•
•
•
•
pH51: 0.0 to 14.0 pH;
pH52: -2.0 to 16.0 pH, -5.0 to 60.0°C;
pH53: -2.00 to 16.00 pH, -5.0 to 60.0°C;
ORP50: ±1000 mV.
Specifications
pH51
pH52
pH53
Range
0.0 to 14.0 pH
Resolution
0.1 pH
-2.0 to 16.0 pH
-5.0 to 60.0°C / 23.0 to 140.0°F
0.1 pH
0.1°C / 0.1°F
±0.1 pH
±1°C / ±2°F
±0.1 pH
±0.2°C / ±0.4°F
automatic
automatic, 1 or 2 points
-2.00 to 16.00 pH
-5.0 to 60.0°C / 23.0 to 140.0°F
0.01 pH
0.1°C / 0.1°F
±0.02 pH
±1°C / ±2°F
±0.03 pH
±0.2°C / ±0.4°F
automatic
automatic, 1 or 2 points
pH/ORP
Temp
pH/ORP
Temp
Accuracy
pH/ORP
(@25°C)
Temp
Typical EMC
pH
Deviation
Temp
Temperature Compensation
Calibration
Adj.offset trimmer
pH Electrode
ORP Electrode
Environment
Battery Type
Battery Life
Dimensions
Weight
±0.1 pH
±0.1 pH
manual, at 2 points
through trimmers
±1000 mV
1 mV
±2 mV
±2 mV
factory calibrated
±120 mV
MA73600 (replaceable)
MA73047 (replaceable)
MA73047 (replaceable)
0 to 50°C, max RH 100%
3 x 1.5V, alkaline
More than 1500 hours
of continuous use
165 x 30 x 30 mm
80 g
-5 to 60°C; max RH 100%
3 x 1.5V; alkaline (included)
approx. 200 hours
-5 to 60°C; max RH 100%
3 x 1.5V; alkaline (included)
approx. 200 hours
165 x 30 x 30 mm
80 g
165 x 30 x 30 mm
80 g
Accessories
MA73047 Replaceable pH electrode with
built-in temperature sensor
MA73500 Replaceable ORP electrode
MA73600 Replaceable pH electrode
M10004B pH 4.01 buffer solution 20 mL
sachet (25 pcs)
M10007B pH 7.01 buffer solution 20 mL
sachet (25 pcs)
16
ORP50
MA73500 (replaceable)
0 to 50°C; max RH 100%
3 x 1.5V, alkaline (included)
approx. 1000 hours
of continuous use
165 x 30 x 30 mm
85 g
Ordering Information
M10010B pH 10.01 buffer solution 20 mL
sachet (25 pcs)
MA9015 Electrode storage solution, 230 mL
MA9016 Electrode cleaning solution, 230 mL
MA9020 200/275 mV ORP solution, 230 mL
bottle
M10000B Electrode rinse solution, 20 mL
sachet (25 pcs)
All waterproof testers are supplied in a carton box complete with calibration solution, batteries, instruction manual and screwdriver (only pH51) for calibration.
ORP50 is supplied in a carton box complete with batteries
and instruction manual.
www.milwaukeeinst.com
pH/ORP
pH40/pH41/pH42
Microprocessor pH Testers
The Sharp pH Tester Series features an extendable cloth
reference junction system which eliminates reading errors
from clogged junctions. Using tweezers, the cloth junction
can be extended to expose new unused portions greatly
extending the life of the electrode.
The Sharp Tester microprocessor provides the user with
push button calibration and automatic buffer recognition.
Auto Shut-off after 10 minutes saves on battery life.
All Sharp injection-molded testers are built with a rugged
"one piece" splash-proof casing preventing water infiltration
immersible up to the LCD.
pH40, pH41 and pH42 are supplied complete with calibration solution and batteries.
• pH40: pH tester with 0.0 to 14.0 pH range
and ±0.2 pH accuracy;
• pH41: pH tester with 0.0 to 14.0 pH range
and ±0.1 pH accuracy;
• pH42: pH tester with 0.00 to 14.00 pH range
and ±0.02 pH accuracy.
Specifications
Range
Resolution
Accuracy (@25°C)
Calibration
Temperature Compensation
Environment
Battery Type
Battery Life
Auto-off
Dimensions
Weight
pH40
pH41
pH42
0.0 to 14.0 pH
0.1 pH
±0.2 pH
automatic, 2 points
0.0 to 14.0 pH
0.1 pH
±0.1 pH
automatic, 2 points
automatic, 0 to 50°C / 32 to 122°F
0 to 50°C / 32 to 122°F; max RH 95%
4 x 1.5V alkaline (included)
approx. 300 hours of use
after 8 minutes of non-use
155 x 45 x 25 mm
150 g
0.00 to 14.00 pH
0.01 pH
±0.02 pH
automatic, 2 points
automatic, 0 to 50°C / 32 to 122°F
0 to 50°C / 32 to 122°F; max RH 95%
4 x 1.5V alkaline (included)
approximately 300 hours of use
after 8 minutes of non-use
155 x 45 x 25 mm
150 g
0 to 50°C / 32 to 122°F; max RH 95%
4 x 1.5V alkaline (included)
approx. 300 hours of use
after 8 minutes of non-use
155 x 45 x 25 mm
150 g
Glass electrode
316 Stainless Steel casing for the temperature sensor
compensates automatically for temperature in seconds
Cloth junction: The Sharp testers revolutionary new
cloth junction ensures easy maintenance and longer life
Accessories
M10004B pH 4.01 buffer solution, 20 mL
sachet (25 pcs)
M10007B pH 7.01 buffer solution, 20 mL
sachet (25 pcs)
M10010B pH 10.01 buffer solution, 20 mL
sachet (25 pcs)
Ordering Information
MA9015 Electrode storage solution, 230 mL
MA9016 Electrode cleaning solution, 230 mL
M10000B Electrode rinse solution, 20 mL
sachet (25 pcs)
www.milwaukeeinst.com
pH40, pH41 and pH42 are supplied in a box complete
with pH 7.01 20 mL sachet of calibration solution, protective cap, 4 x 1.5V batteries and instructions.
17
pH/ORP
SMS110/SMS115/SMS120
pH Monitors
The Smart pH monitor allows you to continuously monitor
pH values directly in your reservoir.
Features include: user selectable set point (for SMS110 and
SMS120), visual LED alarm when values go above the set
point and manual calibration.
The SMS115 with the Cal-test button will warn the user when
the electrode needs to be calibrated again.
Each monitor is powered by a 12 VDC adapter and is ideal
for applications such as Hydroponic and Aquarium.
The pH monitors are very simple to operate:
1. hang your monitor above the reservoir;
2. connect the adapter to the meter and plug in the power
supply (make sure that your power supply is in a safe area
away from the water);
3. immerse 2/3 of the electrode in the solution;
4. the probe can now remain there permanently.
The SMS110 and the SMS120 are supplied complete with
a MA911B/2 pH electrode, the SMS115 with MA912B/2 pH
electrode.
Each monitor comes complete with a 12 VDC adapter and
calibration solution.
Specifications
Range
Resolution
Accuracy (@25°C)
Calibration
Set point
Alarm
pH Electrode
Environment
Power Supply
Dimensions
Weight
pH
pH
pH
SMS110
SMS115
SMS120
0.0 to 14.0 pH
0.1 pH
±0.2 pH
manual, 2 point, through trimmers
on the meter front and rear panels
3.5 to 7.5 pH
active when measure is
higher than selected set point
MA911B/2 (included)
0 to 50°C / 32 to 122°F; max RH 95%
12 VDC power adapter (included)
160 x 80 x 40 mm
220 g (meter only)
0.0 to 14.0 pH
0.1 pH
±0.2 pH
manual, 2-point,
through trimmers on the meter side
0.0 to 14.0 pH
0.1 pH
±0.2 pH
manual, 2 point, through trimmers
on the meter front and rear panels
5.5 to 9.5 pH
active when measure is
higher than selected set point
MA911B/2 (included)
0 to 50°C / 32 to 122°F; max RH 95%
12 VDC power adapter (included)
160 x 80 x 40 mm
220 g (meter only)
MA912B/2 with BNC connector (included)
0 to 50°C / 32 to 122°F; max RH 95%
12 VDC power adapter (included)
85 x 104 x 39 mm
130 g (meter only)
Accessories
M10004B pH 4.01 buffer solution, 20 mL
sachet (25 pcs)
M10007B pH 7.01 buffer solution, 20 mL
sachet (25 pcs)
M10010B pH 10.01 buffer solution, 20 mL
sachet (25 pcs)
M100058B Cal-test solution for SMS115, 20 mL
sachet (25 pcs)
M10016B Electrode cleaning solution, 20 mL
sachet (25 pcs)
MA9015 Electrode storage solution, 20 mL
sachet (25 pcs)
MA9016 Electrode cleaning solution, 20 mL
sachet (25 pcs)
18
Ordering Information
MA911B/2 Double junction, gel filled pH
electrode with 2 m cable (will be
replaced by SE220)
SE220/2(*) pH electrode with BNC connector
and 2 m cable
MA912B/2 pH electrode with BNC connector
with 2 m cable (will be replaced
by SE250)
SE250(*) pH electrode with BNC connector
with 2 m cable
(*) Available from the 1st of September 2011
SMS110 is supplied complete with a 12VDC adapter,
MA911B/2 pH electrode, 20 mL pH 7.01 sachet of calibration solution, calibration screwdriver and instructions.
SMS120 is supplied complete with a 12VDC adapter,
MA911B/2 pH electrode, 20 mL pH 7.01 sachet of calibration solution, calibration screwdriver and instructions.
SMS115 is supplied complete with a 12VDC adapter,
MA912B/2 pH electrode, 20 mL pH 4.01 and 7.01 sachets
of calibration solution, 2x20 mL electrode cleaning solution
sachets, 2x20 mL pH Cal-Test Solution, calibration screwdriver and instructions.
www.milwaukeeinst.com
pH/ORP
SMS122/SMS510/SMS125
pH & ORP Controllers
Ideal for the Aquarium market, the SMS122 pH controller
enables you to automate your dosing of CO2 and makes
sure that the plants of your aquarium are always healthy.
Simply plug in the solenoid valve to the plug socket supplied.
Every aquarium needs individual attention. This is why the
SMS510 has a user selectable set point for the ORP
(0 to 600 mV).
Simply plug the ozone generator into the controller’s
power plug and it will dose until the mV set point is
reached.
It will automatically switch on again if the ORP falls below
the adjusted point.
SMS125 has dual set points adjustable with knobs: for pH
(4 to 8 pH) and for ORP (-200 to 600 mV).
Simply attach 2 solenoid valves or pumps to the plug
sockets supplied to dose CO2 and ozone as required!
Perfect and ideal where 24-hours maintaining is required.
Specifications
Range
Resolution
Accuracy (@25°C)
Set point pH
Set point ORP
pH Alarm
SMS122
SMS510
SMS125
0.0 to 14.0 pH
0.1 pH
±0.2 pH
5.5 to 9.5 pH
±1000 mV (ORP)
1 mV (ORP)
±5 mV (ORP)
0.00 to 14.00 pH; ±1000 mV (ORP)
0.01 pH; 1 mV (ORP)
±0.2 pH ; ± 5 mV (ORP)
4 to 8 pH
-200 to 600 mV
active when measurement is
higher than the set points
active when measurements are
lower than set points
active when measurement is
higher than set point
active when the measurement is
lower than set point
MA911B/2 (included)
MA921B/2 (included)
0 to 50°C / 32 to 122°F; max RH 95%
12 VDC power adapter (included)
115VAC, 2A, 60Hz or 230VAC, 1A, 50Hz
160 x 80 x 40 mm
220 g
0 to 600 mV
active when measurement is
higher than set point
ORP Alarm
pH Output Power Socket
active when measurement is
lower than set point
active when measurement is
higher than set point (5A max)
ORP Output Power Socket
pH Electrode
ORP Electrode
Environment
Power Supply
Power Drivers
Dimensions
Weight
active when the measurement is
lower than set point
MA911B/2 (included)
0 to 50°C / 32 to 122°F; max RH 95%
12 VDC power adapter (included)
115VAC, 2A, 60Hz or 230VAC, 1A, 50Hz
160 x 80 x 40 mm
220 g (meter only)
MA921B/2 (included)
0 to 50°C / 32 to 122°F; max RH 95%
12 VDC power adapter (included)
115VAC, 2A, 60Hz or 230VAC, 1A, 50Hz
160 x 80 x 40 mm
220 g (meter only)
Accessories
M10004B pH 4.01 buffer solution 20 mL
sachet (25 pcs)
M10007B pH 7.01 buffer solution 20 mL
sachet (25 pcs)
M10010B pH 10.01 buffer solution 20 mL
sachet (25 pcs)
M10000B Electrode rinse solution 20 mL
sachet (25 pcs)
MA9015 Electrode storage solution 20 mL
sachet (25 pcs)
MA955
Solenoid valve with 1.5 m cable
Ordering Information
MA911B/2 Double junction, gel filled pH electrode
with 1 m cable (will be replaced
by SE220/2)
SE220/2(*) pH electrode with BNC connector
and 1 m cable
MA921B/2 ORP Electrode with BNC connector
and 2 m cable (will be replaced by
SE300/2)
SE300/2(*) ORP Electrode with BNC connector
and 2 m cable
SMS122 is supplied complete with 12 VDC adapter,
MA911B/2 pH electrode, 20 mL pH4.01 sachet of calibration solution, 20 mL pH7.01 sachet of calibration solutioncalibration screwdriver and instructions.
SMS510 is supplied complete with 12 VDC adapter,
MA921B/2 ORP electrode and instructions.
SMS125 is supplied complete with 12 VDC adapter, power
plug socket for ozone dosing, MA911B/2 pH electrode,
MA921B/2 ORP electrode, 20 mL pH7.01 sachet of calibration solution, calibration screwdriver and instructions.
(*) Available from the 1st of September 2011
www.milwaukeeinst.com
19
EC/TDS
Mi170
Autoranging EC/TDS/NaCl/Temperature Laboratory Bench Meter
Mi170 measures 4 different parameters - EC, TDS (Total
Dissolved Solids), percentage of NaCl and temperature in
a variety of ranges.
The auto-ranging feature for EC and TDS measurements
automatically sets the resolution suitable to the
tested sample. All measurements
can be temperature compensated
at 20 or 25°C and the compensation coefficient is selectable by
the user.
The automatic temperature compensation can also be disabled
for measuring the actual conductivity value. The stability indicator
on the LCD ensures accuracy.
Conductivity readings are performed
with the 4-ring probe supplied with the
meter. The GLP feature allows users to
store and recall data on system status.
PC compatible through an RS232 or USB port.
Specifications Mi170
Range
EC
TDS
Resolution
Accuracy
Calibration
NaCl
Temp
EC
TDS
NaCl
Temp
EC
TDS
NaCl
Temp
EC
NaCl
Temp
Temp. Compensation
Temp. Coefficient
Probe
TDS Factor
Log on Demand
GLP
PC Interface
Environment
Power supply
Dimensions
Weight
0.00 to 29.99 µS/cm; 30.0 to 299.9 µS/cm; 300 to 2999 µS/cm; 3.00 to 29.99 mS/cm;
30.0 to 200.0 mS/cm; up to 500.0 mS/cm actual conductivity (uncompensated EC)*
0.00 to 14.99 mg/L (ppm); 15.0 to 149.9 mg/L (ppm); 150 to 1499 mg/L (ppm);
1.5 to 14.99 g/L (ppt); 15.0 to 100.0 g/L (ppt); up to 400.0 g/L actual TDS* (with 0.80 factor)
0.0 to 400.0%
-20.0 to 120.0°C / -4.0 to 248.0°F
0.01 µS/cm; 0.1 µS/cm; 1.0 µS/cm; 0.01 mS/cm; 0.1 mS/cm
0.01 mg/L; 0.1 mg/L; 1.0 mg/L; 0.01 g/L; 0.1 g/L
0.1%
0.1°C / 0.1°F
±1% of reading ±(0.05 µS/cm or 1 digit)
±1% of reading ±(0.03 mg/L or 1 digit)
±1% of reading
±0.4°C / ±0.8°F
1 point slope calibration with 6 memorized solutions (84.0 µS/cm, 1413 µS/cm,
5.00 mS/cm, 12.88 mS/cm, 80.0 mS/cm, 111.8 mS/cm)
1 point, with MA9066 calibration solution
2 points, 0 to 50°C / 32 to 12 °F
automatic or manual, from -20.0 to 120.0°C / -4.0 to 248.0°F
selectable from 0.00 to 6.00%/°C (EC and TDS only)
MA814DB/1 4-ring probe with built-in temperature sensor (included)
0.40 to 0.80 (default value is 0.50)
up to 50 samples on each range (EC, TDS, NaCl)
last EC, NaCl calibration data
RS232 / USB Opto-isolated
0 to 50°C / 32 to 122°F; max RH 95%
12 VDC power adapter (included)
230 x 160 x 95 mm
0.9 kg
More accurate readings with the
4-RING MA814DB/1 EC/TDS/NaCl
and Temperature probe!
Conductivity readings are performed
by applying an alternate current
to the 4-ring probe which
creates a variable voltage depending on
the conductivity.
Rear Connector Panel layout
Communication to the PC is done via opto-isolated USB
and RS232 ports.
(*) Uncompensated conductivity (or TDS) is the conductivity (or TDS) value without temperature compensation.
Accessories
MA814DB/1 EC/Temperature probe with DIN
MA9060
MA9061
MA9063
MA9064
connector and 1 m cable
12880 µS/cm calibration solution,
230 mL bottle
1413 µS/cm calibration solution,
230 mL bottle
84 µS/cm calibration solution,
230 mL bottle
80000 µS/cm conductivity solution,
230 mL bottle
Ordering Information
MA9065
MA9066
MA9069
MA9310
MA9311
MA9315
MA9350
Mi5200
20
111.8 mS/cm calibration solution,
230 mL bottle
100% NaCl calibration solution,
230 mL bottle
5000 µS/cm solution, 230 mL bottle
12 VDC Adapter, 220 V
12 VDC Adapter, 110 V
Electrode holder
RS232 connection cable with
2 meters cable
Application Software
Mi170 is supplied complete with
• MA814DB/1 EC/TDS/NaCl/Temperature Probe
• MA9315 Electrode Holder
• M10030 12880 µS/cm calibration solution
• M10031 1413 µS/cm calibration solution
• Mi5200 Application Software
• MA9350 RS232 connection cable with 2 meters cable
• 12 VDC Adapter
• Instruction manual
www.milwaukeeinst.com
EC/TDS
Mi306
Automatic & Logging EC/TDS/NaCl Temp Meter
Mi306 is a waterproof portable logging microprocessorbased Conductivity/TDS/NaCl/temperature meter.
The autoranging feature of the EC and TDS ranges
automatically sets the meter to the scale with the highest
possible resolution.
The Auto Endpoint (HOLD) feature automatically freezes the
display when a stable reading is reached. The measurements are automatically (ATC) or manually (MTC) compensated for temperature.
The temperature coefficient value is user selectable. It is
possible to disable the temperature compensation and
measure the actual conductivity (NoTC).
The Battery Error Preventing System (BEPS) switches the
meter off when the batteries are too weak to support proper
function. The meter can store measurements in memory by
logging function for retrieval at a later time upon user
request.
Mi306 also allows data transfer to computer through the
RS232 port. Double LCD displays, for
simultaneous readings of the specific
conductivity and temperature.
Accessories
Specifications
Mi306
Range
0.00 to 29.99 µS/cm; 30.0 to 299.9 µS/cm; 300 to 2999 µS/cm;
3.00 to 29.99 mS/cm; 30.0 to 200.0 mS/cm; up to 500.0 mS/cm actual(*) EC
0.00 to 14.99 mg/L; 15.0 to 149.9 mg/L; 150 to 1499 mg/L; 1.50 to 14.99 g/L;
15.0 to 100.0 g/L; up to 400.0 g/L actual(*) TDS (with 0.80 factor)
0.0 to 400.0 %
0.0 to 60.0°C
0.01 µS/cm (from 0.00 to 29.99 µS/cm); 0.1 µS/cm (from 30.0 to 299.9 µS/cm);
1 µS/cm (from 300 to 2999 µS/cm); 0.01 mS/cm (from 3.00 to 29.99 mS/cm);
0.1 mS/cm (over 30.0 mS/cm)
0.01 mg/L (from 0.00 to 14.99 mg/L); 0.1 mg/L (from 15.0 to 149.9 mg/L);
1 mg/L (from 150 to 1499 mg/L); 0.01 g/L (from 1.50 to 14.99 g/L);
0.1 g/L (over 15.0 g/L)
0.1 %
0.1°C
±1% of reading (±0.05 µS/cm or 1 digit whichever greater)
±1% of reading (±0.053 ppm or 1 digit whichever greater)
±1% of reading
±0.4°C
±1% of reading
±1% of reading
±1% of reading
±0.1°C
up to 250 records, LOG on demand or auto-logging
with PC through RS232 port
1 point with 7 memorized buffers: 84 µS/cm, 1413 µS/cm, 5000 µS/cm,
80000 µS/cm, 111800 µS/cm
1 point with MA9066 buffer (optional)
automatic or manual from 0 to 60°C
(can be disabled to measure actual conductivity and TDS)
0.00 to 6.00 %/°C (for EC and TDS only)
Default value is 1.90%/°C
0.40 to 0.80 (default value is 0.50)
reference Temperature: 20 or 25°C
MA814D/1 EC probe with built-in temperature sensor & 1 m cable (included)
after 5 minutes of non use (can be disabled)
1 x 9V Battery (included) / approx. 100 hours of use
IP 67
0 to 50°C / 32 to 122°F; max RH 100%
200 x 85 x 50 mm
280 g
(Autoranging) EC
(Autoranging) TDS
Resolution
NaCl
Temp
EC
TDS
Accuracy
Typical EMC
Deviation
Logging
Communication
EC Calibration
NaCl Calibration
Temperature
Compensation
Temperature
Coefficient
TDS Factor
Probe
Auto-off
Battery Type / Battery Life
Casing
Environment
Dimensions
Weight
NaCl
Temp
EC
TDS
NaCl
Temp
EC
TDS
NaCl
Temp
MA814D/1 4-ring EC probe with DIN connector
and 1 m cable
M10030B 12880 µS/cm calibration solution,
20 mL sachet, 25 pcs.
M10031B 1413 µS/cm calibration solution,
20 mL sachet, 25 pcs.
M10033B 84 µS/cm calibration solution,
20 mL sachet, 25 pcs.
M10035B 111.8 mS/cm calibration solution,
20 mL sachet, 25 pcs.
MA9060 12880 µS/cm calibration solution,
230 mL bottle
MA9061 1413 µS/cm calibration solution,
230 mL bottle
MA9063 84 µS/cm calibration solution, 230 mL bottle
MA9065 111.8 mS/cm calibration solution,
230 mL bottle
MA9066 100% NaCl calibration solution, 230 mL bottle
MA9069 5000 µS/cm solution, 230 mL bottle
MA9351 RS232 connection cable (5 to 9 pin)
with 2 meters cable (for Mi306)
Mi5200
Application Software
Ordering Information
Mi306 is supplied in a hard carrying case complete with
• MA814D/1 EC/TDS/Nacl/Temp probe
with DIN connector and 1 meter cable
• MA9060 12880 µS/cm calibration solution
• Mi5200 Application Software
• MA9351 RS232 connection cable with 2 meters cable
• Instruction manual
(*) Uncompensated conductivity (or TDS) is the conductivity (or TDS) value without temperature compensation.
www.milwaukeeinst.com
21
EC/TDS
MW301/MW302/MW401/MW402
Entry level, inexpensive Conductivity & TDS
Portable Meters for fast and reliable results
New
MW300, MW301, MW401 and MW402 are compact
Conductivity and TDS Portable Meters with Faster Micro
Processor. These handy and ergonomically designed
portable meters are ideal for anyone working on a low
budget and still requires fast and reliable measurements.
These portable meters are suitable for a wide range of
applications, such as Educational, Agriculture and
Horticulture, as well as water and environmental analysis.
These portable meters with Automatic Temperature
Compensation have a smaller, ergonomic and lighter case
design. Other features include 100% larger and easier to
read LCD Display and long battery life.
Each meter is supplied complete with Conductivity/TDS
probe with 1 meter cable and calibration solution.
Choose your portable EC & TDS meter according to the
proper EC/TDS ranges for your application:
•
•
•
•
MW301: 0 to 1990 µS/cm with a 10 µS/cm resolution;
MW302: 0.0 to 10.0 mS/cm with a 0.1 mS/cm resolution;
MW401: 0 to 1990 mg/L (ppm) with a 10 mg/L resolution;
MW402: 0.0 to 10.0 g/L (ppt) with a 0.1 g/L resolution.
Specifications
Range
Resolution
Accuracy (@25°C)
Conversion Factor
Calibration Solutions (included)
Conductivity Probe
Temperature Compensation
Environment
Battery Type
Battery Life
Dimensions
Weight
MW301
MW302
MW401
MW402
0 to 1990 µS/cm
10 µS/cm
±2% Full Scale
0.0 to 10.0 mS/cm
0.1 mS/cm
±2% Full Scale
1413 µS/cm (M10031B)
SE510 (included)
automatic, from 5 to 50°C
0 to 50°C, max RH 95%
1 x 9V alkaline (included)
approx. 300 hours of use
145 x 80 x 40 mm
220 g (with battery)
1413 µS/cm (M10031B)
SE520 (included)
automatic, from 5 to 50°C
0 to 50°C, max RH 95%
1 x 9V alkaline (included)
approx. 300 hours of use
145 x 80 x 40 mm
220 g (with battery)
0 to 1990 mg/L (ppm)
10 mg/L (ppm)
±2% Full Scale
0.5
1382 mg/L (M10032B)
SE510 (included)
automatic, from 5 to 50°C
0 to 50°C, max RH 95%
1 x 9V alkaline (included)
approx. 300 hours of use
145 x 80 x 40 mm
220 g (with battery)
0.0 to 10.0 g/L (ppt)
0.1 g/L (ppt)
±2% Full Scale
0.5
6.44 g/L (M10038B)
SE520 (included)
automatic, from 5 to 50°C
0 to 50°C, max RH 95%
1 x 9V alkaline (included)
approx. 300 hours of use
145 x 80 x 40 mm
220 g (with battery)
Accessories
SE510
EC/TDS probe with DIN connector
and 1 m cable for MW301, MW401
SE520
EC/TDS probe with DIN connector
and 1 m cable for MW302, MW402
M10031B 1413 µS/cm calibration
solution, 20 mL (25 pcs)
M10032B 1382 ppm (mg/L) calibration
solution, 20 mL (25 pcs)
22
Ordering Information
M10038B 6.44 ppt (g/l) calibration solution,
MA9060
MA9061
MA9062
20 mL (25 pcs)
12880 µS/cm calibration solution,
230 mL bottle
1413 µS/cm calibration solution,
230 mL bottle
1382 ppm TDS solution,
230 mL bottle
MW301 is supplied complete with SE510 EC probe,
20 mL 1413 µS/cm sachet of calibration solution, screwdriver for calibration, 9V battery and instructions.
MW302 is supplied complete with SE520 EC probe,
20 mL 1413 µS/cm sachet of calibration solution, screwdriver for calibration, 9V battery and instructions.
MW401 is supplied complete with SE510 EC probe,
20 mL 1382 ppm sachet of calibration solution, screwdriver for calibration, 9V battery and instructions.
MW402 is supplied complete with SE520 EC probe,
20 mL 6.44 ppt sachet of calibration solution, screwdriver
for calibration, 9V battery and instructions.
www.milwaukeeinst.com
EC/TDS
SM301/SM302/SM401/SM402
Portable Conductivity & TDS Meters
SM301, SM302, SM401 and SM402 are conductivity and
TDS Portable Meters, with Automatic Temperature
Compensation, and are ideal for the educational and agricultural markets.
Soil conductivity is checked before fertilizer application to
pinpoint field needs and after fertilization to establish its
effectiveness. The EC testing provides all agricultural operation with a method to optimize chemical applications and
minimize operational cost.
These instruments have been designed to meet the
Grower's need for equipment suited to the aggressive environments found in agricultural and hydroponics applications.
Choose your portable EC & TDS meter according to the
proper EC/TDS ranges for your application:
•
•
•
•
SM301: 0 to 1990 µS/cm with a 10 µS/cm resolution;
SM302: 0.0 to 10.0 mS/cm with a 0.1 mS/cm resolution;
SM401: 0 to 1990 mg/L (ppm) with a 10 mg/L resolution;
SM402: 0.0 to 10.0 g/L (ppt) with a 0.1 g/L resolution.
Each meter is supplied complete with Conductivity/TDS
probe with 1 meter cable and calibration solution.
Specifications
Range
Resolution
Accuracy (@25°C)
Conversion Factor
Calibration Solutions (included)
Conductivity Probe
Temperature Compensation
Environment
Battery Type
Battery Life
Dimensions
Weight
SM301
SM302
SM401
SM402
0 to 1990 µS/cm
10 µS/cm
±2% Full Scale
0.0 to 10.0 mS/cm
0.1 mS/cm
±2% Full Scale
1413 µS/cm (M10031B)
MA811D/1 (included)
automatic, from 5 to 50°C
0 to 50°C, max RH 95%
1 x 9V alkaline (included)
approx. 300 hours of use
145 x 80 x 40 mm
220 g (with battery)
1413 µS/cm (M10031B)
MA812D/1 (included)
automatic, from 5 to 50°C
0 to 50°C, max RH 95%
1 x 9V alkaline (included)
approx. 300 hours of use
145 x 80 x 40 mm
220 g (with battery)
0 to 1990 mg/L (ppm)
10 mg/L (ppm)
±2% Full Scale
0.5
1382 mg/L (M10032B)
MA811D/1 (included)
automatic, from 5 to 50°C
0 to 50°C, max RH 95%
1 x 9V alkaline (included)
approx. 300 hours of use
145 x 80 x 40 mm
220 g (with battery)
0.0 to 10.0 g/L (ppt)
0.1 g/L (ppt)
±2% Full Scale
0.5
6.44 g/L (M10038B)
MA812D/1 (included)
automatic, from 5 to 50°C
0 to 50°C, max RH 95%
1 x 9V alkaline (included)
approx. 300 hours of use
145 x 80 x 40 mm
220 g (with battery)
Accessories
M10031B 1413 µS/cm calibration
solution, 20 mL (25 pcs)
M10032B 1382 ppm (mg/L) calibration
solution, 20 mL (25 pcs)
M10038B 6.44 ppt (g/l) calibration solution,
20 mL (25 pcs)
MA811D/1 EC/TDS probe with DIN connector
and 1 m cable
Ordering Information
MA812D/1 EC/TDS probe with DIN connector
and 1 m cable
MA9060 12880 µS/cm calibration solution,
230 mL bottle
MA9061 1413 µS/cm calibration solution,
230 mL bottle
MA9062 1382 ppm TDS solution,
230 mL bottle
www.milwaukeeinst.com
SM301 is supplied complete with MA811D/1 EC probe,
20 mL 1413 µS/cm sachet of calibration solution, screwdriver for calibration, 9V battery and instructions.
SM302 is supplied complete with MA812D/1 EC probe,
20 mL 1413 µS/cm sachet of calibration solution, screwdriver for calibration, 9V battery and instructions.
SM401 is supplied complete with MA811D/1 EC probe,
20 mL 1382 ppm sachet of calibration solution, screwdriver for calibration, 9V battery and instructions.
SM402 is supplied complete with MA812D/1 EC probe,
20 mL 6.44 ppt sachet of calibration solution, screwdriver
for calibration, 9V battery and instructions.
23
EC/TDS
EC59/EC60
Pocket-size EC/TDS/Temp Meters
These new waterproof Pocket-size EC/TDS/Temp Meters
include features such as a replaceable probe, temperature
in °C or °F, automatic temperature compensation with
adjustable β, battery level indicator, stability indicator, automatic shut-off and automatic calibration all in a floating,
waterproof casing.
EC59 shows on the dual-level LCD the EC (3999 µS/cm) or
TDS (2000 ppm) value. It also displays the temperature from
0.0 to 60.0°C (or 32.0 to 140.0°F) on the secondary level at
the same time.
EC60 shows on the dual-level LCD the EC (20.00 mS/cm) or
TDS (10.00 ppt) value. It also displays the temperature from
0.0 to 60.0°C (or 32.0 to 140.0°F) on the secondary level at
the same time.
Easy to read
Display
Specifications
Dual level LCD displays
EC/TDS and temperature.
Range
Resolution
Accuracy
(@20°C)
Typical EMC
Deviation
EC
TDS
Temp
EC
TDS
Temp
EC
TDS
Temp
EC
TDS
Temp
Calibration
Temperature Compensation
Probe
Environment
Battery Type
Battery Life
Auto-off
Dimensions
Weight
EC59
EC60
3999 µS/cm
2000 ppm
0.0 to 60.0°C / 32.0 to 140.0°F
1 µS/cm
1 ppm
0.1°C / 0.1°F
2% Full Scale
2% Full Scale
±0.5°C / ±1°F
2% Full Scale
2% Full Scale
±0.5°C / ±1°F
automatic, 1 point
automatic, with β=0.0 to 2.4%/°C
Mi59P (replaceable)
0 to 50°C / 32 to 122°F; max RH 100%
4 x 1.5V; IEC LR44, A76 (included)
approx. 100 hours of use
after 8 minutes of non-use
200 x dia 38 mm
100 g
20.00 mS/cm
10.00 ppt
0.0 to 60.0°C / 32.0 to 140.0°F
0.01 mS/cm
0.01 ppt
0.1°C / 0.1°F
2% Full Scale
2% Full Scale
±0.5°C / ±1°F
2% Full Scale
2% Full Scale
±0.5°C / ±1°F
automatic, 1 point
automatic, with β=0.0 to 2.4%/°C
Mi59P (replaceable)
0 to 50°C / 32 to 122°F; max RH 100%
4 x 1.5V; IEC LR44, A76 (included)
approx. 100 hours of use
after 8 minutes of non-use
200 x dia 38 mm
100 g
Accessories
Mi59P
Replaceable probe for EC59 & EC60
M10030B 12880 µS/cm calibration solution,
20 mL sachet, 25 pcs
M10031B 1413 µS/cm calibration solution,
20 mL sachet, 25 pcs
M10032B 1382 ppm (mg/L) calibration
solution, 20 mL sachet, (25 pcs)
M10038B 6.44 ppt (g/L) calibration solution,
20 mL sachet, (25 pcs)
24
Replaceable
EC/TDS/Temp probe
Exposed temperature sensor.
Replaceable EC/TDS probe.
Ordering Information
MA9060
12880 µS/cm calibration solution,
230 mL bottle
MA9061 1413 µS/cm calibration solution,
230 mL bottle
MA9016 Cleaning solution, 230 mL bottle
M10000B Rinse solution, 20 mL sachet,
25 pcs
EC59 is supplied complete with protective cap, 20 mL
1413 µS/cm sachet of calibration solution, carton box, batteries and instructions.
EC60 is supplied complete with protective cap, 20 mL
12880 µS/cm sachet of calibration solution, carton box,
batteries and instructions.
www.milwaukeeinst.com
EC/TDS
C65/C66/T75/T76
Sharp Waterproof Conductivity & TDS testers
These simple and easy-to-use testers are designed for all
applications.
Its IP67 Waterproof casing and replaceable probe make
them suitable also for heavy duty applications, such as
Wastewater treatment and Agriculture.
The modular design allows easy probe and battery
replacement.
4 models are available and all have Automatic
Temperature Compensation:
• C65:
• C66:
• T75:
• T76:
Conductivity tester low range
Range: 0 to 1999 µS/cm
Conductivity tester high range
Range: 0.00 to 10.00 mS/cm
TDS tester low range
Range: 0 to 1999 ppm (mg/L)
TDS tester high range
Range: 0 to 9990 ppm (mg/L)
Specifications
Range
Resolution
Accuracy
Typical EMC Deviation
Temperature Compensation
TDS Factor
Calibration
Probe
Environment
Battery Type
Battery Life
Dimensions
Weight
C65
C66
T75
T76
Waterproof EC
Waterproof EC
Waterproof TDS
Waterproof TDS
0 to 1999 µS/cm
1 µS/cm
±2% Full Scale
±2% Full Scale
automatic from 5 to 50°C
with β=2%/°C
0.00 to 10.00 mS/cm
0.01 mS/cm
±2% Full Scale
±2% Full Scale
automatic from 5 to 50°C
with β=2%/°C
manual, at 1 point
through trimmer
MA73075 (replaceable)
0 to 50°C; max RH 100%
3 x 1.5V, alkaline
approx. 250 hours
of continuous use
165 x 30 x 30 mm
80 g
manual, at 1 point
through trimmer
MA73076 (replaceable)
0 to 50°C; max RH 100%
3 x 1.5V, alkaline
approx. 250 hours
of continuous use
165 x 30 x 30 mm
80 g
0 to 1999 ppm (mg/L)
1 ppm (mg/L)
±2% Full Scale
±2% Full Scale
automatic from 5 to 50°C
with β=2%/°C
0.5
manual, at 1 point
through trimmer
MA73075 (replaceable)
0 to 50°C; max RH 100%
3 x 1.5V, alkaline
approx. 250 hours
of continuous use
165 x 30 x 30 mm
80 g
0 to 9990 ppm (mg/L)
10 ppm (mg/L)
±2% Full Scale
±2% Full Scale
automatic from 5 to 50°C
with β=2%/°C
0.5
manual, at 1 point
through trimmer
MA73076 (replaceable)
0 to 50°C; max RH 100%
3 x 1.5V, alkaline
approx. 250 hours
of continuous use
165 x 30 x 30 mm
80 g
Accessories
Ordering Information
MA73075 Replaceable Conductivity probe, LR
MA73076 Replaceable Conductivity probe, HR
M10030B 12880 µS/cm calibration
solution, 20 mL (25 pcs)
M10031B 1413 µS/cm calibration
solution, 20 mL (25 pcs)
M10032B 1382 ppm (mg/L) calibration
solution, 20 mL (25 pcs)
M10038B 6.44 ppt (g/L) calibration solution,
20 mL (25 pcs)
M10080B 800 ppm calibration solution
20 mL (25 pcs)
www.milwaukeeinst.com
C65 and C66 are supplied complete with protective cap,
20 mL 1413 µS/cm sachet of calibration solution, carton
box, calibration screwdriver, batteries and instructions.
T75 is supplied complete with protective cap, 20 mL 1382
ppm sachet of calibration solution, carton box, calibration
screwdriver, batteries and instructions.
T76 is supplied complete with protective cap, 20 mL 6.44
ppt sachet of calibration solution, carton box, calibration
screwdriver, batteries and instructions.
25
EC/TDS
C61/C62/T71/T72
High accuracy Conductivity and TDS Testers
These simple 1-point calibration testers are designed for the
Horticultural and Agricultural market.
They are built in a one-piece splash-proof casing and they
are immersible up to the LCD.
All models have Automatic Temperature Compensation and
the temperature sensor housing is made out of 316 inox
steel instead of plastic.
This ensures 100 times faster readings and higher accuracy.
Models available are:
• C61:
• C62:
• T71:
• T72:
Conductivity tester low range
Range: 0 to 1999 µS/cm
Conductivity tester high range
Range: 0.00 to 19.99 mS/cm
TDS tester low range
Range: 0 to 1999 ppm
TDS tester high range
Range: 0.00 to 10.00 g/L (ppt)
Specifications
Range
Resolution
Accuracy
Temperature Compensation
Battery Life
Dimensions
C61
C62
T71
T72
Sharp EC
Sharp EC
Sharp TDS
Sharp TDS
0 to 1999 µS/cm
1 µS/cm
±2% Full Scale
automatic from 5 to 50°C
350 hours
155 x 45 x 25 mm
0.00 to 19.99 mS/cm
0.01 mS/cm
±2% Full Scale
automatic from 5 to 50°C
350 hours
155 x 45 x 25 mm
0 to 1999 ppm
1 ppm
±2% Full Scale
automatic from 5 to 50°C
350 hours
155 x 45 x 25 mm
0.00 to 10.00 g/L
0.01 g/L
±2% Full Scale
automatic from 5 to 50°C
350 hours
155 x 45 x 25 mm
Stainless steel casing ATC
Conventional tester
Temperature has a huge influence on TDS and EC, on the basis of a 2% error per degree
Celsius. Even small temperature differences between the measured solution and the
measuring instrument can lead to large reading errors. For instance, if the solution's temperature is 15°C, and the tester’s is 35°C, the reading error is (35-15x2%) 40%.
Conventional testers with plastic casings for their temperature sensors also slow response
times. It can take at least 10 minutes for conventional testers to fully compensate
temperature differences. This causes reading error.
Sharp tester's new stainless steel encased temperature sensors can compensate in
seconds, no matter how large the temperature difference. Sharp tester’s fast response
time guarantees high accuracy.
Temperature sensor
Plastic casing
Sharp Tester
316 stainless steel casing
Accessories
M10030B 12880 µS/cm calibration
solution, 20 mL (25 pcs)
M10031B 1413 µS/cm calibration
solution, 20 mL (25 pcs)
M10032B 1382 ppm (mg/L) calibration
solution, 20 mL (25 pcs)
26
Ordering Information
M10038B 6.44 ppt (g/L) calibration solution,
20 mL (25 pcs)
M10080B 800 ppm calibration solution
20 mL (25 pcs)
C61 and C62 are supplied complete with protective cap,
20 mL 1413 µS/cm sachet of calibration solution, hard
carrying case, calibration screwdriver, batteries and
instructions.
T71 and T72 are supplied complete with protective cap,
20 mL 1382 ppm sachet of calibration solution, hard carrying case, calibration screwdriver, batteries and instructions.
www.milwaukeeinst.com
EC/TDS
SMS310/SMS410/SMS315/SMS415
Conductivity and TDS Monitors
Reliable Conductivity and TDS monitors with Automatic
temperature compensation and 1 point manual calibration
powered by a 12 VDC adapter.
They are ideal for the hydroponic market and allow you to
continuously monitor EC or TDS values directly in your
reservoir.
Other features include: user selectable set point, visual
LED alarm when values go below the set point (for
SMS310 and SMS410).
The CAL test feature on the SMS315 and SMS415 will
warn the user (through a LED) when the probe needs to
be calibrated again!
The monitors are very simple to operate:
1. hang your monitor above your reservoir
2. connect the adapter to the meter and plug in the power
supply (make sure that your power supply is in a safe area
from the water!)
3. immerse 2/3 of the probe in the solution
4. the probe can now remain there permanently.
Specifications
Range
Resolution
Accuracy (@25°)
Conversion Factor
Set point
Alarm
EC/TDS
EC/TDS
Temperature Compensation
Environment
Probe
Power Supply
Dimensions
Weight
SMS310
SMS410
SMS315
SMS415
0.0 to 10.0 mS/cm
0.1 mS/cm
±2% Full Scale
0 to 1990 ppm
10 ppm
±2% Full Scale
0.7
700 to 1900 ppm
active when the measure
is lower than the set point
automatic, from 5 to 50°C
0 to 50°C; max RH 95%
MA812/2 (included)
12 VDC power adapter (included)
165 x 80 x 40 mm
220 g (meter only)
0.00 to 9.99 mS/cm
0.01 mS/cm
±2% Full Scale
0 to 1990 mg/L (ppm)
10 mg/L (ppm)
±2% Full Scale
approx. 0.7
0 to 50°C; max RH 95%
MA815/2 (included)
12 VDC power adapter (included)
85 x 104 x 39 mm
130 g (meter only)
0 to 50°C; max RH 95%
MA816/2 (included)
12 VDC power adapter (included)
85 x 104 x 39 mm
130 g (meter only)
1.5 to 3.5 mS/cm
active when the measure
is lower than the set point
automatic, from 5 to 50°C
0 to 50°C; max RH 95%
MA811/2 (included)
12 VDC power adapter (included)
165 x 80 x 40 mm
220 g (meter only)
Accessories
M10031B 1413 µS/cm calibration solution,
20 mL sachet (25 pcs)
M10032B 1382 ppm calibration solution,
20 mL sachet (25 pcs)
M10039B 5.00 mS/cm calibration solution,
20 mL sachet (25 pcs)
M10442B 1500 ppm calibration solution,
20 mL sachet (25 pcs)
M100020B Cal-Test solution for SMS315,
20 mL sachet (25 pcs)
Ordering Information
M100040B
MA811/2
MA812/2
MA815/2
MA816/2
Cal-Test solution for SMS415,
20 mL sachet (25 pcs)
Conductivity probe with 2 m cable
Conductivity probe with 2 m cable
Conductivity probe for SMS315 with
2 m cable
Conductivity probe for SMS415 with
2 m cable
www.milwaukeeinst.com
SMS310 is supplied complete with 12VDC adapter,
MA811/2 EC probe, 20 mL 1413 µS/cm sachet of calibration solution, screwdriver for calibration and instruction.
SMS410 is supplied complete with 12VDC adapter,
MA812/2 TDS probe, 20 mL 1382 ppm sachet of calibration solution, screwdriver for calibration and instruction.
SMS315 is supplied complete with 12VDC adapter,
MA815/2 EC probe, 20 mL 1413 µS/cm sachet of calibration solution, 20 mL conductivity Cal-Test Solution,
screwdriver for calibration and instruction.
SMS415 is supplied complete with 12VDC adapter,
MA816/2 TDS probe, 20 mL 1382 ppm sachet of calibration solution, 20 mL conductivity Cal-Test Solution,
screwdriver for calibration and instruction.
27
Dissolved
Oxygen
Mi190
Extended Range Bench Dissolved Oxygen Meter
Ideal for testing Dissolved Oxygen in the pharmaceutical
and food Industry, as well as monitoring in water treatment
plants. The user can choose to measure D.O. readings in
mg/L or % of saturation of O2.
This meter can be used for any type of water, as it allows
measurements to compensate for temperature, altitude and
salinity factors. The automatic logging interval can be set to
perform analysis and store data into the memory.
New
All logged data can be downloaded to your PC through an
RS232 or USB serial port. Memory can store up to 50 samples. Mi190 features an automatic calibration procedure, at
1 or 2 points (at 0 and 100% of O2 saturation). The polarographic probe supplied with the meter (MA840/2) measures
the current generated by the reaction of O2 with Ag.
Mi190 is supplied complete with MA840/2 DO probe
with 2 m cable, 2 spare membranes, MA7041 electrolyte solution (30 mL), 12 VDC power adapter,
probe holder and instruction manual.
Specifications
Mi190
Polarographic D.O. Probe
Range
0.00 to 45.00 mg/L (ppm)
0.0 to 300%
-5.0 to 55.0°C / 23.0 to 131.0°F
0.01 mg/L (ppm)
0.1%
0.1°C / 0.1°F
±1.5 Full Scale
±1.5 Full Scale
±0.4°C / ±0.8°F
50 records, LOG on demand or auto-logging
automatic, 1 or 2 point at 0% (MA9070) and 100% (in air)
0.0 to 50.0°C / 32.0 to 122.0°F
0 to 4000 m; resolution 100 m
0 to 40 g/L; resolution 1 g/L
MA840/2 with DIN connector (included)
Included in DO probe
2 points (0.0°C and 50.0°C / 32.0 to 122.0°F)
up to 50 records
RS232 / USB Opto-isolated
12 VDC power adapter (included)
0 to 50°C / 32 to 122°F; max RH 100%
230 x 160 x 95 mm
0.9 Kg
Polarographic D.O. probe with
2 meters cable
Resolution
Accuracy
O2
% Saturation O2
Temp
O2
% Saturation O2
Temp
O2
% Saturation O2
Temp
Logging
DO Calibration
Temperature Compensation
Altitude Compensation
Salinity Compensation
DO Probe
Temperature Probe
Calibration
Log on demand
PC interface
Power supply
Environment
Dimensions
Weight
Accessories
MA9070
MA9071
MA9310
MA9311
MA9315
28
Zero Oxygen Solution, 230 mL bottle
Refilling Electrolyte Solution,
230 mL bottle
12 VDC Adapter, 220 V
12 VDC Adapter, 110 V
Electrode Holder
Rear Connector Panel layout
Communication to the PC is done via opto-isolated USB
and RS232 ports.
Ordering Information
MA841
MA840/2
MA9350
Mi5200
Spare membrane (5 pcs)
DO probe with 2 meters cable
RS232 connection cable with
2 m cable
Application Software
Mi190 is supplied complete with:
• MA840/2 DO probe with 2 meter cable
• MA841 Spare membrane
• MA9071 Electrolyte solution
• MA9315 Electrode Holder
• Mi5200 Application Software
• MA9350 RS232 connection cable with 2 meters cable
• 12 VDC Adapter
• Instruction manual
www.milwaukeeinst.com
Dissolved
Oxygen
Mi605
Portable D.O. Meter for Field Applications
Mi605 is a portable, microprocessor-based, Dissolved
Oxygen meter with automatic calibration and temperature
compensation (ATC) specifically designed for spot sampling
applications.
Dissolved Oxygen measurements can be displayed in parts
per million (ppm=mg/L) or in % of saturation.
The temperature is indicated in Celsius from 0 to 50°C with
0.1 resolution. The meter compensates salinity and altitude
automatically after manual input.
Calibration is very simple and fast: just expose the polarographic Dissolved Oxygen probe MA840, supplied with the
instrument, to air and press the CAL button.
No need for chemical solutions!
A HOLD button allows the user to freeze the reading on the
LCD.
The low battery indicator and the easy to replace screw on
cap membranes make the Mi605 a compact instrument and
ideal for all applications: aquaculture, wastewater, environmental and educational.
Hard Carrying Case
Specifications
Mi605
Range
0.0 to 45.00 mg/L (ppm)
0.0 to 300%
0.0 to 50.0°C / 32 to 122°F
0.01 mg/L (ppm)
0.1%
0.1°C
±1.5% Full Scale
±1.5% Full Scale
±0.5°C
±0.3 mg/L (ppm)
±3.5%
±0.5°C
automatic in saturated air
automatic, from 0 to 50°C / 32 to 122°F
0 to 4000 m; 100 m resolution
0 to 80 g/L; 1 g/L resolution
MA840 (included)
0 to 50°C / 32 to 122°F; max RH 100%
1 x 9V alkaline (included)
approx. 100 hours of use
after 4 hours of non-use
200 × 85 × 50 mm
280 g (with battery)
Resolution
Accuracy
(@25°C)
Typical EMC
Deviation
O2
% Saturation O2
Temp
O2
% Saturation O2
Temp
O2
% Saturation O2
Temp
O2
% Saturation O2
Temp
Calibration
Temperature Compensation
Altitude Compensation
Salinity Compensation
Probe
Environment
Battery Type
Battery Life
Auto-off
Dimensions
Weight
Mi605 is supplied complete in a hard carrying
case complete with a
D.O. probe, spare
membranes, calibration solutions,
battery and instructions.
Accessories
Ordering Information
MA9071
Mi605 is supplied complete with MA840 polarographic
D.O. probe with 3 meters cable, 2 spare membranes,
20 mL bottle of electrolyte solution, rugged carrying case,
9V battery and instructions.
MA841
MA840
Refilling Electrolyte solution,
230 mL bottle
Spare membrane (5 pcs)
D.O. Probe
www.milwaukeeinst.com
29
Dissolved
Oxygen
MW600
Entry level, inexpensive Dissolved Oxygen
Portable Meter for fast and reliable results
New
The MW600 is a compact Portable Dissolved Oxygen meter
with Faster Micro Processor. This handy and ergonomically
designed portable meter is ideal for anyone working on a
low budget and still requires fast and reliable measurements. This portable meter measures Dissolved Oxygen
with a Polarographic probe and is suitable for a wide range
of applications, such as Educational and Aquaculture, as
well as water and environmental analysis.
The MW600 calibrates easily in 2 points (at 100% saturated
air and in 0 Oxygen solution) and has Automatic
Temperature Compensation which guarantees the highest
accuracy.
Other features include smaller, ergonomic and lighter case
design, 100% larger and easier to read LCD Display, low
battery warning, easy to replace screw on cap membranes
and long battery life.
Rugged Carrying Case (Optional) provides handy on-site
meter calibration and measurements.
MW600 is supplied complete with a MA840 D.O. polarographic probe with 3 m cable, calibration screwdriver, 2
spare membranes, MA9071s (30 mL) electrolyte solution,
battery and instructions.
Specifications
Range
Resolution
Accuracy (@25°C)
Calibration
Temperature Compensation
Probe
Environment
Battery Type
Battery Life
Dimensions
Weight
Large and
Easy-toread
Display
MW600
O2
O2
O2
0.0 to 19.9 mg/L
0.1 mg/L
±1.5% Full Scale
manual on 2 points (zero and slope)
automatic from 0 to 30°C
MA840 (included)
0 to 50°C / 32 to 122°F;
max RH 95%
9V alkaline (included)
approximately 70 hours of use
145 x 80 x 40 mm
220 g (with battery)
MW600 offers
highly stable
and accurate
readings with
large LCD display.
ALTITUDE & SALINITY COMPENSATION:
If the sample contains salts or if you are performing the measurements at altitude different from sea level, the readout values must be corrected, taking into
account the lower degree of oxygen solubility.
Altitude Compensation: all the readouts are referred to sea level, thus the displayed measurements are higher than the actual values. In fact, altitude affects
D.O. concentration by decreasing its value.
The table on the left reports the oxygen solubility at various temperatures and
altitudes, based on sea level barometric pressure of 760 mmHg.
This gives an idea of the error that can be introduced at different altitudes and
allows to calculate the quantity to be subtracted to correct the reading.
Accessories
MA9070
MA9071
30
Zero Oxygen calibration solution,
230 mL bottle
Refilling Electrolyte solution,
230 mL bottle
Altitude, Meters above Sea Level
°C
0m
300 m
600 m
900 m
0
14.6
14.1
13.6
13.2
2
13.8
13.3
12.9
12.4
4
13.1
12.7
12.2
11.9
6
12.4
12.0
11.6
11.2
8
11.8
11.4
11.0
10.6
10
11.3
10.9
10.5
10.2
12
10.8
10.4
10.1
9.7
14
10.3
9.9
9.6
9.3
16
9.9
9.7
9.2
8.9
18
9.5
9.2
8.7
8.6
20
9.1
8.8
8.5
8.2
22
8.7
8.4
8.1
7.8
24
8.4
8.1
7.8
7.5
26
8.1
7.8
7.5
7.3
28
7.8
7.5
7.3
7.0
30
7.5
7.2
7.0
6.8
32
7.3
7.1
6.8
6.6
34
7.1
6.9
6.6
6.4
36
6.8
6.6
6.3
6.1
38
6.6
6.4
6.2
5.9
40
6.4
6.2
6.0
5.8
1200 m 1500 m 1800 m
12.7
12.3
11.8
12.0
11.6
11.2
11.4
11.0
10.6
10.8
10.4
10.1
10.3
9.9
9.6
9.8
9.5
9.2
9.4
9.1
8.8
9.0
8.7
8.3
8.6
8.3
8.0
8.3
8.0
7.7
7.9
7.7
7.4
7.7
7.3
7.1
7.3
7.1
6.8
7.0
6.8
6.6
6.8
6.6
6.3
6.5
6.3
6.1
6.4
6.1
5.9
6.2
6.0
5.8
5.9
5.7
5.5
5.7
5.6
5.4
5.6
5.4
5.2
°F
32.0
35.6
39.2
42.8
46.4
50.0
53.6
57.2
60.8
64.4
68.0
71.6
75.2
78.8
82.4
86.0
89.6
93.2
96.8
100.4
104.4
Ordering Information
MA840
MA841
D.O. Probe
Spare membrane (5 pcs)
MW600 is supplied complete with MA840 probe, 2 spare
membranes, 20 mL bottle of electrolyte solution, calibration screwdriver, 9V battery and instructions.
www.milwaukeeinst.com
Dissolved
Oxygen
SM600
Portable Dissolved Oxygen Meter for Education
The SM600 is a Portable Dissolved Oxygen meter ideal for
use in school laboratories. Dissolved Oxygen measurements are also very important in fish farms and ponds,
where Oxygen levels are continuously monitored to obtain
optimal reproduction.
The SM600 calibrates easily in 2 points (at 100% saturated
air and in 0 Oxygen solution) and has Automatic
Temperature Compensation which guarantees the highest
accuracy.
The low battery warning, easy to replace screw on cap
membranes make this meter very simple to operate.
Rugged Carrying Case (Optional) provides handy on-site
meter calibration and measurements.
SM600 is supplied complete with a MA840 D.O. polarographic probe with 3 m cable, calibration screwdriver, 2
spare membranes, MA9071s (30 mL) electrolyte solution,
battery and instructions.
Specifications
Range
Resolution
Accuracy (@25°C)
Calibration
Temperature Compensation
Probe
Environment
Battery Type
Battery Life
Dimensions
Weight
Polarographic D.O. Probe
SM600
O2
O2
O2
Polarographic D.O. probe with 2 meters cable
0.0 to 19.9 mg/L
0.1 mg/L
±1.5% Full Scale
manual on 2 points (zero and slope)
automatic from 0 to 30°C
MA840 (included)
0 to 50°C / 32 to 122°F;
max RH 95%
9V alkaline (included)
approximately 70 hours of use
145 x 80 x 40 mm
220 g (with battery)
ALTITUDE & SALINITY COMPENSATION:
If the sample contains salts or if you are performing the measurements at altitude different
from sea level, the readout values must be corrected, taking into account the lower degree
of oxygen solubility.
Salinity Compensation: the table below shows the influence of salt concentration in the
measurement of oxygen.
In SM600 all the readouts are referred to 0 g/L of salinity value. In fact, salinity affects D.O.
concentration by decreasing its value. The table below reports the oxygen solubility at various temperatures and salinity.
From the table it is possible to calculate the quantity to be subtracted to correct the
reading.
Accessories
MA9070
MA9071
Zero Oxygen calibration solution,
230 mL bottle
Refilling Electrolyte solution,
230 mL bottle
Salinity (g/L) at Sea Level
°C
0 g/L
10 g/L
20 g/L
30 g/L
35 g/L
°F
10
11.3
10.6
9.9
9.3
9.0
50.0
12
10.8
10.1
9.5
8.9
8.6
53.6
14
10.3
9.7
9.1
8.6
8.3
57.2
16
9.9
9.3
8.7
8.2
8.0
60.8
18
9.5
8.9
8.4
7.9
7.6
64.4
20
9.1
8.5
8.0
7.6
7.4
68.0
22
8.7
8.2
7.8
7.3
7.1
71.6
24
8.4
7.9
7.5
7.1
6.9
75.2
26
8.1
7.6
7.2
6.8
6.6
78.8
28
7.8
7.4
7.0
6.6
6.4
82.4
Ordering Information
MA840
MA841
D.O. Probe
Spare membrane (5 pcs)
www.milwaukeeinst.com
SM600 is supplied complete with MA840 probe, 2 spare
membranes, 20 mL bottle of electrolyte solution, calibration screwdriver, 9V battery and instructions.
31
MULTI
Mi180
pH/ORP/EC/TDS/NaCl/Temperature Laboratory Bench Meter
Mi180 measures 6 different parameters: pH, ORP, EC, TDS
(Total Dissolved Solids), percentage of NaCl and temperature in a variety of ranges.
pH calibration can be performed in 3 points selectable
between 7 memorized buffers, to provide a very accurate
calibration curve even when testing different samples, where
very wide differences in pH can be found.
The auto-ranging feature for EC and
TDS measurements automatically sets
the resolution suitable to the tested
sample. All measurements can be temperature compensated at 20 or 25°C
and the compensation coefficient is
selectable by the user.
The automatic temperature compensation can also be disabled for measuring
the actual conductivity value. The stability
indicator on the LCD ensures accuracy.
Conductivity readings are
performed with the 4-ring
probe supplied with the
meter.
The GLP feature allows users to
store and recall data on system
status.
PC compatible through an RS232
port or USB.
Specifications
Mi180
Accessories
Range
-2.00 to 16.00 pH; -2.000 to 16.000 pH
±699.9 mV; ±2000 mV
0.00 to 29.99 µS/cm; 30.0 to 299.9 µS/cm; 300 to 2999 µS/cm;
3.00 to 29.99 mS/cm; 30.0 to 200.0 mS/cm; up to 500.0 mS/cm (uncompensed EC*)
0.0 to 14.99 mg/L (ppm); 15.0 to 149.9 mg/L (ppm); 150 to 1499 mg/L (ppm);
1.50 to 14.99 g/L (ppt); 15.0 to 100.0 g/L (ppt);
up to 400.0 g/L actual TDS (with 0.80 factor)
0.0 to 400.0%
-20.0 to 120.0°C / -4.0 to 248.0°F
0.01 pH; 0.001 pH
0.1 mV; 1 mV
0.01 µS/cm; 0.1 µS/cm; 1 µS/cm; 0.01 mS/cm; 0.1 mS/cm;
0.01 mg/L; 0.1 mg/L; 1.0 mg/L; 0.01 g/L; 0.1 g/L
0.1%
0.1°C / 0.1°F
±0.01 pH; ±0.002 pH
±0.2 mV; ±1 mV
±1% of reading ±(0.05 µS/cm or 1 digit)
±1% of reading ±(0.03 ppm or 1 digit)
±1% reading
±0.4°C / ±0.8°F
±2000 mV
1, 2 or 3 points calibration, with 7 memorized buffers (pH 1.68, 4.01, 6.86, 7.01, 9.18,
10.01 and 12.45)
1 point slope calibration with 6 memorized solutions: (84 µS/cm, 1413 µS/cm,
5.00 mS/cm, 12.88 µS/cm, 80.0 µS/cm, 111.8 mS/cm)
1 point, with MA9066 solution
2 point, at 0 and 50°C / 32 and 122°F
automatic or manual, from -20.0 to 120.0°C / -4.0 to 248.0°F
selectable from 0.00 to 6.00%/°C (EC and TDS only)
MA917B/1 & MA831R (included)
MA814DB/1 (included)
0.40 to 0.80 (default value is 0.50)
up to 50 samples on each range (pH, mV, EC, TDS, NaCl)
last pH, EC, NaCl calibration data
RS232 / USB Opto-isolated
0 to 50°C / 32 and 122°F; max RH 95%
1012 Ohm
12 VDC power adapter (included)
230 x 160 x 95 mm
0.9 kg
MA9004
MA9007
MA9010
MA9015
MA9016
MA9112
MA9060
pH
mV
EC
TDS
Resolution
Accuracy
Rel mV offset
Calibration
NaCl
Temp
pH
mV
EC
TDS
NaCl
Temp
pH
mV
EC
TDS
NaCl
Temp
pH
EC
NaCl
Temp
Temperature Compensation
Temperature Coefficient
pH Electrodes & Temp Probe
EC/TDS/NaCl/Temp Probe
TDS Factor
Log on demand
GLP
PC Interface
Environment
Input Impedance
Power supply
Dimensions
Weight
pH 4.01 buffer, 230 mL bottle
pH 7.01 buffer, 230 mL bottle
pH 10.01 buffer, 230 mL bottle
Electrode storage solution, 230 mL bottle
Electrode cleaning solution, 230 mL bottle
pH 12.45 buffer solution, 230 mL bottle
12880 µS/cm calibration solution,
230 mL bottle
MA9061 1413 µS/cm calibration solution,
230 mL bottle
MA9063 84 µS/cm calibration solution,
230 mL bottle
MA9065 111.8 mS/cm calibration solution,
230 mL bottle
MA9066 100% NaCl calibration solution, 230 mL bottle
MA9069 5000 µS/cm solution, 230 mL bottle
MA9310 12 VDC Adapter, 220 V
MA9311 12 VDC Adapter, 110 V
MA9315 Electrode Holder
MA917B/1 Double junction refillable pH electrode
MA814DB/1 EC/TDS/NaCl/Temperature probe
with DIN connector and 1 m cable
MA921B/1 Platinum ORP electrode with 1 m
cable (will be replaced by SE310)
SE310(*) Platinum ORP electrode with 1 m
cable
MA831R Temperature probe
MA9350 RS232 connection cable with
2 meters cable
(*) Available from the 1st of September 2010
(*) Uncompensated conductivity (or TDS) is the conductivity (or TDS) value without temperature compensation.
Ordering Information
Mi180 is supplied complete with
• MA917B/1 pH Electrode
• MA814DB/1 EC/TDS/NaCl/Temperature probe
• MA831R Temperature Probe
32
• MA9315 Electrode Holder
• M10004 pH 4.01 Sachet Buffer solution
• M10007 pH 7.01 Sachet Buffer solution
• M10010 pH 10.01 Sachet Buffer solution
• M10030 12880 µS/cm calibration solution
• M10031 1413 µS/cm calibration solution
• M10016 Sachet Electrode Cleaning solution
• Mi5200 Application Software
• MA9350 RS232 connection cable
with 2 meters cable
• Graduate Pipet, 12 VDC Adapter & Instruction
manual
www.milwaukeeinst.com
MULTI
Mi805/Mi806
Portable pH/EC/TDS/Temperature Meters
Measures 4 parameters with 1 single probe.
Mi805 and Mi806 offer you a combination of pH,
Conductivity, total dissolved solids and temperature
measurements.
You can select from a range of calibration buffers and also
the temperature scale (°C or °F) can be selected.
The multi-parameter probe MA851D/1, includes
pH/EC/TDS and temperature, all in one rugged handle.
Other features include different TDS factors from 0.45 to
1.00, and a range of temperature coefficients (ß) from 0.0
to 2.4% for greater consistency and reproducibility.
The Stability Indicator prompts the user when the reading
stabilizes.
The Auto-Hold Function automatically freezes reading for
later viewing. Large and Easy-to-Read display provides
simultaneous readings of pH and Temperature or EC/TDS
and temperature.
Specifications
Accessories
MA851D/1
Range
Resolution
Accuracy
(@25°C)
Typical EMC
Deviation
pH
EC
TDS
Temp
pH
EC
TDS
Temp
pH
EC/TDS
Temp
pH
EC/TDS
Temp
Temperature
Compensation
pH Calibration
EC Calibration
EC/TDS Conversion Factor
Probe
Environment
Battery Type
Battery Life
Auto-off
Dimensions
Weight
Mi805
Mi806
0.00 to 14.00 pH
0 to 3999 µS/cm
0 to 1999 ppm
0.0 to 60.0°C / 32.0 to 140.0°F
0.01 pH
1 µS/cm
1 ppm
0.1°C / 0.1°F
±0.01pH
±2% Full Scale
±0.5°C / ±1°F
±0.02 pH
±2% Full Scale
±0.5°C / ±1°F
automatic from 0 to 60°C;
with ß adj. from 0.0 to 2.4%/°C
automatic, 1 or 2-point
with automatic buffer recognition
automatic, 1 point
adj. from 0.45 to 1.00
MA851D/1 amplified
pH/EC/TDS/Temperature probe
with DIN connector
and 1 m cable (included)
0 to 50°C / 32 to 122°F;
max. RH 100%
1 x 9V alkaline (included)
approx. 300 hours
after 8 minutes of non-use
200 x 85 x 50 mm
260 g (with battery)
0.00 to 14.00 pH
0.00 to 20.00 mS/cm
0.00 to 10.00 ppt
0.0 to 60.0°C / 32.0 to 140.0°F
0.01 pH
0.1 mS/cm
0.01 ppt
0.1°C / 0.1°F
±0.01 pH
±2% Full Scale
±0.5°C / ±1°F
±0.02 pH
±2% Full Scale
±0.5°C / ±1°F
automatic from 0 to 60°C;
with ß adj. from 0.0 to 2.4%/°C
automatic, 1 or 2-point
with automatic buffer recognition
automatic, 1 point
adj. from 0.45 to 1.00
MA851D/1 amplified
pH/EC/TDS/Temperature probe
with DIN connector
and 1 m cable (included)
0 to 50°C / 32 to 122°F;
max. RH 100%
1 x 9V alkaline (included)
approx. 300 hours
after 8 minutes of non-use
200 x 85 x 50 mm
260 g (with battery)
www.milwaukeeinst.com
MA9004
MA9006
MA9007
MA9009
MA9010
MA9015
MA9016
MA9060
MA9061
M10000B
Amplified pH/EC/TDS/Temperature probe
with DIN connector and 1 m cable
pH 4.01 buffer solution, 230 mL bottle
pH 6.86 buffer solution, 230 mL bottle
pH 7.01 buffer solution, 230 mL bottle
pH 9.18 buffer solution, 230 mL bottle
pH 10.01 buffer solution, 230 mL bottle
Probe storage solution, 230 mL
General cleaning solution, 230 mL
12880 µS/cm solution, 230 mL
1413 µS/cm solution, 230 mL
Rinse solution, 20 mL (25 pcs.)
Ordering Information
Mi805 is supplied complete with MA851D/1
pH/EC/TDS/Temp amplified probe with 1 meter cable,
2x20 mL pH 4.01 and pH 7.01 sachets of calibration solution, 2x20 mL 1413 µS/cm sachets of calibration solutions,
2x20 mL sachet of electrode cleaning solutions, rugged
carrying case, 9V battery and instructions.
Mi806 is supplied complete with MA851D/1
pH/EC/TDS/Temp amplified probe with 1 meter cable,
2x20 mL pH 4.01 and pH 7.01 sachets of calibration solution, 2x20 mL 12880 µS/cm sachets of calibration solutions, 2x20 mL sachet of electrode cleaning solutions,
rugged carrying case, 9V battery and instructions.
33
MULTI
MW801/MW802
Entry level, inexpensive pH/EC/TDS Portable
Meters for fast and reliable results
New
MW801 and MW802 are compact Portable Meters with
Faster Micro Processor. These meters allow you to measure
pH, EC (conductivity) and TDS with just one instrument and
one single probe!
These easier and faster to calibrate portable meters have a
smaller, ergonomic and lighter case design. Other features
include 100% larger and easier to read LCD Display and
long battery life.
Both meters calibrate manually in pH, Conductivity and TDS.
Each meter is supplied with the MA850 interchangeable
probe with 1 meter cable to measure pH, Conductivity and
TDS. The pH electrode utilizes a fiber junction to reduce
contamination when measuring fertilizer solutions.
• The MW801 with a Conductivity range that goes up to
1990 µS/cm and TDS range that goes up to 1990 ppm is
an ideal tool for drinking water measurements.
• The MW802, with a conductivity range that goes up to
6.00 mS/cm and the TDS up to 4000 ppm is ideal for testing in crop production.
Large and Easy-to-read Display
Specifications
Range
Resolution
Accuracy
(@20°C)
Calibration
Solutions
pH
EC
TDS
pH
EC
TDS
pH
EC/TDS
Conversion Factor
Calibration
Temperature Compensation
Probe
Environment
Battery Type / Battery Life
Auto-off
Dimensions
Weight
MW801 and MW802 offer highly stable and
accurate readings with large LCD display.
MW801
MW802
0.0 to 14.0 pH
0 to 1990 µS/cm
0 to 1990 ppm
0.1 pH
10 µS/cm
10 ppm
±0.2 pH
±2% Full Scale
M10007 (pH 7.01)
M10032 (1382 ppm)
M10031 (1413 µS/cm)
0.5
manual, at 1 point
automatic, from 0 to 50°C
SE600 combination
pH/EC/TDS probe
0 to 50°C / 32 to 122°F; max RH 95%
1 x 9 V alkaline / 150 hours of use
after 8 minutes of non-use
185 x 82 x 45 mm
165 g (with battery)
0.00 to 14.00 pH
0.00 to 6.00 mS/cm
0 to 4000 ppm
0.10 pH
0.01 mS/cm
10 ppm
±0.20 pH
±2% Full Scale
M10007 (pH 7.01)
M10442 (1500 ppm)
M10031 (1413 µS/cm)
0.68
manual, at 1 point
automatic, from 0 to 50°C
SE600 combination
pH/EC/TDS probe
0 to 50°C / 32 to 122°F; max RH 95%
1 x 9 V alkaline / 150 hours of use
after 8 minutes of non-use
185 x 82 x 45 mm
165 g (with battery)
Accessories
M10004B pH 4.01 buffer solution, 20 mL
sachet (25 pcs)
M10007B pH 7.01 buffer solution, 20 mL
sachet (25 pcs)
M10010B pH 10.01 buffer solution, 20 mL
sachet (25 pcs)
M10031B 1413 µS/cm calibration solution,
20 mL sachet (25 pcs)
34
Combined interchangeable pH,
Conductivity and TDS Probe
The pH electrode utilizes a fiber junction to
reduce contamination when measuring fertilizer
solutions.
Ordering Information
M10032B 1382 ppm calibration solution,
20 mL sachet (25 pcs)
M10442B 1500 ppm calibration solution,
20 mL sachet (25 pcs)
MA9015 Electrode storage solution, 230 mL
bottle
SE600
pH/EC/TDS spare probe with 1 m
cable
MW801 is supplied complete with SE600 combination
pH/EC/TDS probe, 20 mL sachet pH 7.01 buffer solution,
20 mL 1413 µS/cm sachet of calibration solution, 20 mL
1382 ppm sachet of calibration solution, 9V battery and
instructions.
MW802 is supplied complete with SE600 combination
pH/EC/TDS probe, 20 mL sachet pH 7.01 buffer solution,
20 mL 1413 µS/cm sachet of calibration solution, 20 mL
1500 ppm sachet of calibration solution, 9V battery and
instructions.
www.milwaukeeinst.com
MULTI
SM801/SM802
Portable pH/EC/TDS combination Meters
3 meters in 1! These meters allow you to measure pH, EC
(conductivity) and TDS with just one instrument and one
single probe!
The SM801 with a Conductivity range that goes up to
1990 µS/cm and TDS range that goes up to 1990 ppm is an
ideal tool for drinking water measurements.
The SM802, with a conductivity range that goes up to 6.00
mS/cm and the TDS up to 4000 ppm is ideal for testing in
crop production. Soil and well water pH that is too acidic or
alkaline can have an adverse effect on plant nutrient and
water uptake and directly effect the efficiency of fertilizer,
herbicides and pesticides.
Soil Conductivity is checked before fertilizer application to
pinpoint field needs and after fertilization to establish its
effectiveness.
Supplied with the MA850 interchangeable probe to measure
pH, Conductivity and TDS.
The pH electrode utilizes a fiber junction to reduce
contamination when measuring fertilizer solutions.
Both meters calibrate manually in pH, Conductivity and TDS.
Combined interchangeable pH,
Conductivity and TDS Probe
Specifications
The pH electrode utilizes a fiber junction to
reduce contamination when measuring
fertilizer solutions.
Range
Resolution
Accuracy
(@20°C)
Calibration
Solutions
pH
EC
TDS
pH
EC
TDS
pH
EC/TDS
Conversion Factor
Calibration
Temperature Compensation
Probe
Environment
Battery Type / Battery Life
Auto-off
Dimensions
Weight
SM801
SM802
0.0 to 14.0 pH
0 to 1990 µS/cm
0 to 1990 ppm
0.1 pH
10 µS/cm
10 ppm
±0.2 pH
±2% Full Scale
M10007 (pH 7.01)
M10032 (1382 ppm)
M10031 (1413 µS/cm)
0.5
manual, at 1 point
automatic, from 0 to 50°C
MA850 combination
pH/EC/TDS probe
0 to 50°C / 32 to 122°F; max RH 95%
1 x 9 V alkaline / 150 hours of use
after 8 minutes of non-use
185 x 82 x 45 mm
165 g (with battery)
0.00 to 14.00 pH
0.00 to 6.00 mS/cm
0 to 4000 ppm
0.10 pH
0.01 mS/cm
10 ppm
±0.20 pH
±2% Full Scale
M10007 (pH 7.01)
M10442 (1500 ppm)
M10031 (1413 µS/cm)
0.68
manual, at 1 point
automatic, from 0 to 50°C
MA850 combination
pH/EC/TDS probe
0 to 50°C / 32 to 122°F; max RH 95%
1 x 9 V alkaline / 150 hours of use
after 8 minutes of non-use
185 x 82 x 45 mm
165 g (with battery)
Accessories
M10004B pH 4.01 buffer solution, 20 mL
sachet (25 pcs)
M10007B pH 7.01 buffer solution, 20 mL
sachet (25 pcs)
M10010B pH 10.01 buffer solution, 20 mL
sachet (25 pcs)
M10031B 1413 µS/cm calibration solution,
20 mL sachet (25 pcs)
pH Calibration
Adjust the calibration
knob until the LCD
shows the pH value at
the above measured
temperature.
EC/TDS
Calibration
Turn the EC/TDS calibration knob until the
display shows the EC
or TDS reading at 25°C.
Ordering Information
M10032B 1382 ppm calibration solution,
20 mL sachet (25 pcs)
M10442B 1500 ppm calibration solution,
20 mL sachet (25 pcs)
MA9015 Electrode storage solution, 230 mL
bottle
MA850
pH/EC/TDS spare probe with 1 m
cable
www.milwaukeeinst.com
SM801 is supplied complete with MA850 combination
pH/EC/TDS probe, 20 mL sachet pH 7.01 buffer solution,
20 mL 1413 µS/cm sachet of calibration solution, 20 mL
1382 ppm sachet of calibration solution, 9V battery and
instructions.
SM802 is supplied complete with MA850 combination
pH/EC/TDS probe, 20 mL sachet pH 7.01 buffer solution,
20 mL 1413 µS/cm sachet of calibration solution, 20 mL
1500 ppm sachet of calibration solution, 9V battery and
instructions.
35
LUX
MW700/SM700
Entry level, inexpensive LUX Portable Meters
for fast and reliable results
MW700 and SM700 are portable Lux meters designed to perform
light measurements. MW700 with Faster Micro Processor, has a
smaller, ergonomic and lighter case design. Other features include
100% larger and easier to read LCD Display and long battery life.
New
These handy and ergonomically designed portable meters are
ideal for anyone working on a low budget and still requires fast
and reliable measurements. These portable meters are suitable for
a wide range of applications, such as Educational, Agriculture and
Horticulture, as well as water and environmental analysis.
Both models are supplied with a light sensor connected to the
meter that measures from 0 to 50000 Lux.
Average indoor lighting ranges from 100 to 1000 Lux and average
outdoor sun lights about 50000 Lux. Lux is a unit that indicates the
density of light that falls on a surface.
The light is necessary for the development of the plants. In fact, it
is necessary a sufficient contribution of light in order to favor the
photosynthesis and the closing of the plants.
The supplement of light by means of lamps electrical
workers is the method simpler and economic in order to
bring the necessary light to the plants.
The human eye is sensitive only to blue, green, and red
light, so in calculating the Lux falling on an object, only
the light that the human eye sees is counted. When only
infrared light falls on an object, the Lux is counted as zero
since our eyes see nothing. Mathematically, a spectral
weighting function becomes convolved with the actual illumination spectrum to calculate Lux exactly.
This is the formal definition of Lux and it makes
Lux an unusual unit of
measure.
MW700
SM700
Still, Lux can be thought of as a way of measuring light in terms of
what our eyes perceive. The metric unit of measure for luminance of a
surface. One Lux is equal to one Lumen per square meter.
One Lux equals 0.0929 footcandles.
Specifications
MW700 and SM700
Range
0.000 to 1999 Lux
2000 to 19999 Lux
20000 to 50000 Lux
manual through key buttons
1 Lux
10 Lux
100 Lux
±6% of reading ±1 digit
560 nm
silicon photodiode
100 scotopic Lux
±2% change per year (in the first two years)
0 to 50°C / 32 to 122°F; max RH 95%
1 x 9V (IEC 6LR61) alkaline
approximately 150 hours of continuous use
after about 5 minutes of non-use
approximately 270 g (meter with sensor)
Range setting
Resolution
Accuracy
Peak Wave Length
Sensor Type
Sensor Sensitivity
Sensor Stability
Environment
Battery Type
Battery Life
Auto-off
Weight
Light Sensor
MW700 and SM700 are provided with a light sensor connected to the meter through
a coaxial cable.
Range keys
Ordering Information
Press one of the three “Range keys” to select the proper scale according to the intensity of the light.
MW700 and SM700 are supplied complete with 9V battery and instructions.
36
www.milwaukeeinst.com
pH/Cl2
Mi411
Free & Total Chlorine and pH Photometer
This latest laboratory grade Microprocessor photometer has an
excellent repeatability and is ideal for field measurements.
Chlorine is the most commonly used water disinfectant.
Applications vary from treatment of drinking water and wastewater to pool and spa sanitization and food processing to sterilization.
Martini Instruments has developed the
Mi411, a portable microprocessor
based instrument to measure three
critical parameters to ensure good
water quality: pH, free chlorine and
total chlorine.
3 in 1 Combination
Photometer!
This instrument provides greater
resolution, better accuracy and
immediate results.
Mi411 is supplied in a hard carrying case including 2 cuvets,
reagents for 100 tests, wiping tissue and instruction manual.
Specifications
Mi411
Free & Total Chlorine and pH
Range
Resolution
Accuracy
Method
Free Chlorine
Total Chlorine
pH
Free Chlorine
Total Chlorine
pH
Free Chlorine
Total Chlorine
pH
Free Chlorine
Total Chlorine
pH
Light Source
Light Detector
Environment
Battery Type
Auto-off
Dimensions
Weight
0.00 to 5.00 mg/L Cl2
0.00 to 5.00 mg/L Cl2
6.5 to 8.0 pH
0.01 mg/L (0.00 to 3.50 mg/L); 0.10 mg/L (above 3.50 mg/L)
0.01 mg/L (0.00 to 3.50 mg/L); 0.10 mg/L (above 3.50 mg/L)
0.1 pH
±0.04 mg/L @1.50 mg/L
±0.04 mg/L @1.50 mg/L
±0.1 pH @7.2 pH
adaptation of the USEPA method 330.5 and Standard Method 4500-Cl G
adaptation of the USEPA method 330.5 and Standard Method 4500-Cl G
adaptation of the phenol red method
tungsten lamp
silicon photocell and 525 nm narrow band interference filter
0 to 50°C / 32 to 122°F; max RH 100%
1 x 9V
after 10 minutes of non-use
192 x 104 x 52 mm
380 g
Accessories
Hard Carrying Case
Mi411 comes complete in hard carrying case, making it
ideal for field measurements.
Ordering Information
Mi504-100 Free & Total Chlorine reagent set
(100 tests)
Mi509-100 pH reagent (100 tests)
Mi511-100 Free & Total Chlorine and pH reagent
set (100 tests)
Mi0001
Mi0002
Mi0003
Mi0004
Mi0005
Glass cuvets (2 pcs)
Caps for cuvets (2 pcs)
Stoppers for cuvets (2 pcs)
Tissue for wiping cuvets (4 pcs)
9V battery (1 pc)
www.milwaukeeinst.com
Mi411 is supplied complete with 2 cuvets, liquid reagents
for 100 tests, hard carrying case, wiping tissue, 9V battery
and instructions.
37
NH3-N/Fe/PO4
Mi405/Mi407/Mi408/Mi412
Ammonia, Iron & Phosphate Photometers
These user-friendly
readings in mg/L.
Colorimeters
will
give
you
direct
Ammonia detection in water treatment systems is particularly
important for aquarium owners and fish farm operators.
Ammonia is highly soluble in water and extremely toxic to
fish. Fish farm owners must monitor and maintain
careful control of ammonia levels to ensure optimum water conditions for their stock. Milwaukee
offers 2 instruments for low and medium concentrations: Mi405 with a range of 0.00 to 9.99
mg/L and Mi407 from 0.00 to 3.00 mg/L
Iron is naturally present in water supplies and its
presence in both potable and industrial applications is regarded as objectionable. Milwaukee
offers Mi408 Iron meter with a range of 0.00 to
5.00 mg/L.
Phosphates are present in natural waters and at concentrations typically found, do not pose any specific health threats to humans.
However, excessive contamination of
water courses from agricultural fertilizer
run off or wastewater/effluent discharge
can promote excessive algae or plant
growth. Milwaukee offers Mi412 with
range 0.00 to 2.50 mg/L.
Specifications
Range
Ammonia
Iron
Phosphate
Ammonia
Iron
Phosphate
Ammonia
Iron
Phosphate
Resolution
Accuracy
Mi405
Mi407
Mi408
Mi412
Ammonia MR
Ammonia LR
Iron HR
Phosphate LR
0.00 to 9.99 mg/L (NH3-N)
0.00 to 3.00 mg/L (NH3-N)
0.00 to 5.00 mg/L Fe
0.00 to 2.50 mg/L PO4
0.01 mg/L
0.01 mg/L
±0.10 mg/L @5.00 mg/L
±0.04 mg/L @1.50 mg/L
0.01 mg/L
0.01 mg/L
±0.03 mg/L @1.50 mg/L
Method
adaptation of Nessler method
adaptation of Nessler method
Light Source
Light Detector
Blue LED 466 nm
silicon photocell and 466 nm
narrow band interference filter
0 to 50°C / 32 to 122°F;
max RH 100%
1 x 9 volt
after 10 minutes of non-use
192 x 104 x 52 mm
380 g
Blue LED 466 nm
silicon photocell and 466 nm
narrow band interference filter
0 to 50°C / 32 to 122°F;
max RH 100%
1 x 9 volt
after 10 minutes of non-use
192 x 104 x 52 mm
380 g
Environment
Battery Type
Auto-off
Dimensions
Weight
Accessories
Mi505-100
Mi507-100
Mi508-100
Mi512-100
38
Ammonia MR reagent (100 tests)
Ammonia LR reagent (100 tests)
Iron HR reagent (100 tests)
Phosphate LR reagent (100 tests)
adaptation of the USEPA
method 315 B and Standard
method 3500 - Fe B
tungsten lamp
silicon photocell and 525 nm
narrow band interference filter
0 to 50°C / 32 to 122°F;
max RH 100%
1 x 9 volt
after 10 minutes of non-use
192 x 104 x 52 mm
380 g
±0.04 mg/L @1.00 mg/L
adaptation of Ascorbic Acid
method
tungsten lamp
silicon photocell and 610 nm
narrow band interference filter
0 to 50°C / 32 to 122°F;
max RH 100%
1 x 9 volt
after 10 minutes of non-use
192 x 104 x 52 mm
380 g
Ordering Information
Mi0001
Mi0002
Mi0003
Mi0004
Mi0005
Glass cuvets (2 pcs)
Caps for cuvets (2 pcs)
Stoppers for cuvets (2 pcs)
Tissue for wiping cuvets (4 pcs)
9V battery (1 pc)
Mi405, Mi407, Mi408 and Mi412 are supplied complete
with 2 cuvets, reagents for 100 tests, hard carrying case,
wiping tissue, 9V battery and instructions.
www.milwaukeeinst.com
Cl2/Cl¯
Mi404/Mi406/Mi413/Mi414
Free & Total Chlorine and Chloride Photometers
Milwaukee provides a range of chlorine photometers for all applications: swimming pool treatments, household cleaners, dishwasher additives, laundry powders/liquids and cooling water
treatment products all contain chlorine as an oxidizing biocide.
Drinking water contains residual chlorine to maintain water purity throughout the supply lines.
Milwaukee offers 3 microprocessor-based instruments with
greater resolution, better accuracy and immediate results.
You can choose between three different models:
Mi404 for measuring free (0.00 to 5.00 mg/L) and total
(0.00 to 5.00 mg/L) chlorine, Mi406 for measuring free (0.00 to
5.00 mg/L) chlorine and Mi413 for measuring free (0.00 to 10.00
mg/L) and total (0.00 to 10.00 mg/L) chlorine.
Chloride is a major constituent of sea water and is extremely corrosive in acidic environments. It requires close monitoring in
applications such as marine boiler systems that are effected by
seawater contamination.
Chlorides are used by the water treatment professional to determine cycles of concentration in low pressure boilers and cooling
systems.
It is essential to monitor chloride concentrations in boiler systems to prevent metal parts being damaged.
In high levels, chloride can corrode stainless steel.
Specifications
Range
Resolution
Free Chlorine
Total Chlorine
Chloride
Free Chlorine
Total Chlorine
Accuracy
Chloride
Free Chlorine
Total Chlorine
Chloride
Method
Light Source
Light Detector
Environment
Battery Type
Auto-off
Dimensions
Weight
Mi404
Mi406
Mi413
Mi414
Free & Total Chlorine
Free Chlorine
Free & Total Chlorine HR
Chloride
0.00 to 5.00 mg/L Cl2
0.00 to 5.00 mg/L Cl2
0.00 to 5.00 mg/L Cl2
0.00 to 10.00 mg/L Cl2
0.00 to 10.00 mg/L Cl2
0.01
0.10
0.01
0.10
0.01 mg/L (0.00 to 3.50 mg/L);
0.10 mg/L (above 3.50 mg/L)
0.01 mg/L (0.00 to 3.50 mg/L);
0.10 mg/L (above 3.50 mg/L
0.01 mg/L (0.00 to 3.50 mg/L);
0.10 mg/L (above 3.50 mg/L)
±0.04 mg/L @1.50 mg/L
±0.04 mg/L @1.50 mg/L
±0.04 mg/L @1.50 mg/L
±0.10 mg/L @5.00 mg/L
±0.10 mg/L @5.00 mg/L
adaptation of the USEPA
method 330.5 and Standard
Method 4500-Cl G
tungsten lamp
silicon photocell and 525 nm
narrow band interference filter
0 to 50°C / 32 to 122°F;
max RH 100%
1 x 9V
after 10 minutes of non-use
192 x 104 x 52 mm
380 g
adaptation of the USEPA
method 330.5 and Standard
Method 4500-Cl G.
tungsten lamp
silicon photocell and 525 nm
narrow band interference filter
0 to 50°C / 32 to 122°F;
max RH 100%
1 x 9V
after 10 minutes of non-use
192 x 104 x 52 mm
380 g
adaptation of the USEPA
method 330.5 and Standard
Method 4500-Cl G.
tungsten lamp
silicon photocell and 525 nm
narrow band interference filter
0 to 50°C / 32 to 122°F;
max RH 100%
1 x 9V
after 10 minutes of non-use
192 x 104 x 52 mm
380 g
0.00 to 20.00 mg/L Cl¯
mg/L
mg/L
mg/L
mg/L
(0.00 to 3.50 mg/L);
(above 3.50 mg/L);
(0.00 to 3.50 mg/L);
(above 3.50 mg/L)
0.01 mg/L
Accessories
±0.4 mg/L @10.0 mg/L
adaptation of mercury (II)
thiocyanate method
Blue LED 466 nm
silicon photocell and 466 nm
narrow band interference filter
0 to 50°C / 32 to 122°F;
max RH 100%
1 x 9V
after 10 minutes of non-use
192 x 104 x 52 mm
380 g
Ordering Information
Mi504-100 Free & Total Chlorine reagent set
(100 tests)
Mi506-100 Free Chlorine reagent set (100 tests)
Mi513-045 Free & Total Chlorine reagent set
(45 tests)
Mi514-100 Chloride reagent set (100 tests)
Mi0001
Mi0002
Mi0003
Mi0004
Mi0005
Glass cuvets (2 pcs)
Caps for cuvets (2 pcs)
Stoppers for cuvets (2 pcs)
Tissue for wiping cuvets (4 pcs)
9V battery (1 pc)
www.milwaukeeinst.com
Mi404, Mi406, Mi413 and Mi414 are supplied complete
with 2 cuvets, reagents, hard carrying case, wiping tissue,
9V battery and instructions.
39
Cl
MW10/MW11
Low cost digital photometers to
measure Free & Total Chlorine
New
Chlorine is the most commonly used water disinfectant. Applications vary from treatment of drinking
water and wastewater to pool and spa sanitization
and food processing to sterilization.
Milwaukee offers 2 models:
MW10 for measuring free chlorine (0.00
to 2.50 mg/L) and MW11 to measure
total chlorine (0.00 to 3.50 mg/L).
Key features include:
• User friendly;
• Smaller & Ergonomic
case design;
• Inexpensive;
• Larger and Easier to
read Display;
• Good accuracy and
immediate results;
Specifications
Range
Resolution
Accuracy
Typical EMC Dev.
Light Source
Light Detector
Method
Environment
Battery Type
Auto-Shut Off
Dimensions
Weight
MW10
MW11
Free Chlorine
Total Chlorine
0.00 to 2.50 ppm
0.01 ppm
±0.03 ppm ±3% of reading
@ 25 °C
±0.01 ppm
Light Emitting Diode @ 525 nm
Silicon Photocell
Adaptation of USEPA method
330.5. The reaction between
free chlorine and the DPD
reagent causes a pink tint in the
sample.
0 to 50°C (32 to 122 °F) max.
95% RH non-condensing
1 x 1.5V AAA
After 2 minutes of non-use
81.5 x 61 x 37.5 mm
(3.2 x 2.4 x 1.5”)
64 g (2.25 oz.)
0.00 to 3.50 ppm
0.01 ppm
±0.03 ppm ±3% of
reading @ 25 °C
±0.01 ppm
Light Emitting Diode @ 525 nm
Silicon Photocell
Adaptation of USEPA method
330.5. The reaction between
free chlorine and the DPD
reagent causes a pink tint in the
sample.
0 to 50°C (32 to 122 °F) max.
95% RH non-condensing
1 x 1.5V AAA
After 2 minutes of non-use
81.5 x 61 x 37.5 mm
(3.2 x 2.4 x 1.5”)
64 g (2.25 oz.)
Ordering information:
Accessories
2720116
2720216
40
Free Chlorine powder reagent, (25 pcs)
Total Chlorine powder reagent (25 pcs)
They are supplied with 2 cuvets, 6 reagents, a battery
and instruction manual.
3000100
3000200
3000300
Glass cuvets with caps (2 pcs)
Tissue for wiping cuvets (2 pcs)
1.5V AAA batteries (1 pcs)
All handy photometers are supplied in a carton box including
2 cuvets, 6 reagents, 1 x 1.5 V AAA battery and instructions.
www.milwaukeeinst.com
PO4/Fe/I
MW12/MW13/MW14
Low cost digital photometers to measure
Phosphate,Iron & Iodine
New
Iron is naturally present in water supplies and therefore needs to be monitored both in potable and industrial
applications. Milwaukee offers the
MW14 Iron meter with a range of
0.00 to 5.00 mg/L.
Phosphates are present in natural waters and at concentrations
typically found, do not pose any
specific health threats to humans.
However, excessive contamination of
water courses from agricultural fertilizer
run off or wastewater/effluent discharge
can promote excessive algae or plant
growth. Milwaukee offers MW12 with a range
of 0.00 to 2.50 mg/L.
Iodine is used as disinfectant in various
applications - one of the most common is the
poultry industry waste water treatment.
Milwaukee offers MW13 with a range of 0.0
to 12.5 mg/L.
Specifications
Range
Resolution
Accuracy
Typical EMC Dev.
Light Source
Light Detector
Method
Environment
Battery Type
Auto-Shut Off
Dimensions
Weight
MW12
MW13
Phosphate
Iodine
Iron
0.0 to 12.5 ppm
0.1 ppm
±0.1 ppm ±5% of reading @ 25 °C
±0.1 ppm
Light Emitting Diode @ 525 nm
Silicon Photocell
Adaptation of the Standard Methods
for the Examination of Water and
Wastewater, 18th edition, DPD
method. The reaction between
iodine and the reagent causes a
pink tint in the sample.
0 to 50°C (32 to 122 °F) max.
95% RH non-condensing
1 x 1.5V AAA
After 2 minutes of non-use
81.5 x 61 x 37.5 mm
(3.2 x 2.4 x 1.5”)
64 g (2.25 oz.)
0.00 to 5.00 ppm
0.01 ppm
±0.04 ppm ±2% of reading @ 25 °C
±0.01 ppm
Light Emitting Diode @ 525 nm
Silicon Photocell
Adaptation of the EPA Phenantroline
method 315B, for natural and treated
waters. The reaction between iron
and reagent causes an orange tint
in the sample.
0.00 to 2.50 ppm
0.01 ppm
±0.04 ppm ±4% of reading @ 25 °C
±0.01 ppm
Light Emitting Diode @ 525 nm
Silicon Photocell
Adaptation of the Standard Methods
fo the Examination of Water and
Wastewater, 20th edition, Ascorbic
Acid method. The reaction between
phosphate and the reagent causes
a blue tint in the sample.
0 to 50°C (32 to 122 °F) max.
95% RH non-condensing
1 x 1.5V AAA
After 2 minutes of non-use
81.5 x 61 x 37.5 mm
(3.2 x 2.4 x 1.5”)
64 g (2.25 oz.)
0 to 50°C (32 to 122 °F) max.
95% RH non-condensing
1 x 1.5V AAA
After 2 minutes of non- use
81.5 x 61 x 37.5 mm
(3.2 x 2.4 x 1.5”)
64 g (2.25 oz.)
Ordering information:
Accessories
2720115
2720316
2720416
MW14
Phosphate powder reagent, (25 pcs)
Iodine powder reagent (25 pcs)
Iron powder reagent, (25 pcs)
3000100
3000200
3000300
Glass cuvets with caps (2 pcs)
Tissue for wiping cuvets (2 pcs)
1.5V AAA batteries (1 pcs)
www.milwaukeeinst.com
All handy photometers are supplied in a carton box including
2 cuvets, 6 reagents, 1 x 1.5 V AAA battery and instructions.
41
Turbidity
Mi415
Turbidity Meter
Turbidity refers to the concentration of undissolved, suspended particles present in a liquid.
Turbidity is a measure of the clarity of a sample.
For potable water applications turbidity is a good indicator of water quality.
New
Turbidity Measurement is achieved by analyzing the amount of
light refracted from suspended particles such as clay, silt and
organic material.
By measuring turbidity, by photometric or tube methods, it is possible to estimate suspended solids
content.
Mi415 has two operating ranges; 0.00 to
50.00 FNU, and 50 to 1000 FNU that can
accommodate the most turbid condition you
may encounter.
Mi415 is supplied in a hard carrying case,
complete with reagents.
Specifications
Mi415
Turbidity Meter
Range
Resolution
Accuracy
Method
Light Source
Light Detector
Environment
Battery Type
Auto-off
Dimensions
Weight
0.00 to 50.00 FNU; 50 to 1000 FNU
0.01 FNU; 1 FNU
±0.5 FNU or ±5% of reading, whichever is greater
detection of scattered light
high emission infrared LED
silicon photocell
0 to 50°C / 32 to 122°F; max RH 100%
1 x 9V
after 5 minutes of non-use
192 x 104 x 52 mm
380 g
Introduction to Turbidity
JTU
The cloudy appearance of water (called Turbidity) is caused by suspended material.
The unit of measure adopted by the ISO Standard is the FNU (Formazine Nephelometric
Unit) and by EPA is NTU (Nephelometric Turbidity Unit).
The other two methods used to test for turbidity and their measurement units are the JTU
(Jackson Turbidity Unit) and the Silica unit (mg/L SiO2).
See the conversion table of these methods and their units for your reference.
Accessories
Mi515-100 AMCO-AEPA-1 @ 0 FNU calibration
solution, 30 mL
AMCO-AEPA-1 @ 10 FNU,
calibration solution, 30 mL
AMCO-AEPA-1 @ 500 FNU,
JTU
1
FTU
SiO2
FTU (NTU/FNU) SiO2 (mg/L)
19
2.5
0.053
1
0.13
0.4
7.5
1
Ordering Information
Mi0011
Mi0012
Mi0013
Mi0004
Mi0005
Glass cuvets (2 pcs)
Caps for cuvets (2 pcs)
Stoppers for cuvets (2 pcs)
Tissue for wiping cuvets (4 pcs)
9V battery (1 pc)
Mi415 is supplied complete with 2 cuvets, reagents, hard
carrying case, wiping tissue, 9V battery and instructions.
calibration solution, 30 mL
42
www.milwaukeeinst.com
Digital
Refractometers
MA871/MA872/MA873/MA881
Digital Refractometers for Brix, Fructose, Glucose
and Invert Sugar Measurements
New
The digital refractometers are optical instruments that
employ the measurement of refractive index to determine
the % Brix of sugar (MA871), % Fructose (MA872),
% Glucose (MA873) and % Invert Sugar (MA881) in aqueous solutions.
The method is both simple and quick. Samples are measured after a simple user calibration with deionized or distilled water. Within seconds the instruments measure
the refractive index of the sample and convert it to
% Brix or % by weight concentration units.
The digital refractometers eliminate the uncertainity
associated with mechanical refractometers and
are easily portable for measurements in the field.
The measurement technique and temperature
compensation employ methodology recommended in the ICUMSA Methods Book
(Internationally recognized body for Sugar
Analysis). Temperature (in °C or °F) is displayed
simultaneously with the measurement on the
large dual level display along with icons for Low
Power and other helpful message codes.
Key features include:
• Dual-level LCD
• Automatic Temperature Compensation (ATC)
• Easy setup and storage
• Battery operation with Low Power indicator (BEPS)
• Automatically turns off after 3 minutes of non-use
Specifications
Range
Resolution
Accuracy
Light Source
Measurement Time
Minimum Sample Volume
Sample Cell
Temperature Compensation
Case Material
Enclosure Rating
Battery Type
Battery Life
Auto-shut off
Dimensions
Weight
MA871
Brix
MA872
Fructose
MA873
Glucose
MA881
Invert Sugar
0 to 85% Brix
0 to 80°C / 32 to 176°F
0.1% Brix
0.1°C / 0.1°F
±0.2% Brix
±0.3°C / ±0.5°F
yellow LED
approximately 1.5 seconds
100 µL (cover prism totally)
SS ring and flint glass prism
automatic between
10 and 40°C / 50 to 104°F
ABS AB
IP 65
1 x 9V AA (included)
5000 reading
after 3 minutes of non-use
192 x 102 x 67 mm
420 g
0 to 85% mass
0 to 80°C / 32 to 176°F
0.1%
0.1°C / 0.1°F
±0.2%
±0.3°C / ±0.5°F
yellow LED
approximately 1.5 seconds
100 µL (cover prism totally)
SS ring and flint glass prism
automatic between
10 and 40°C / 50 to 104°F
S
IP 65
1 x 9V AA (included)
5000 reading
after 3 minutes of non-use
192 x 102 x 67 mm
420 g
0 to 85% mass
0 to 80°C / 32 to 176°F
0.1%
0.1°C / 0.1°F
±0.2%
±0.3°C / ±0.5°F
yellow LED
approximately 1.5 seconds
100 µL (cover prism totally)
SS ring and flint glass prism
automatic between
10 and 40°C / 50 to 104°F
ABS
IP 65
1 x 9V AA (included)
5000 reading
after 3 minutes of non-use
192 x 102 x 67 mm
420 g
0 to 85% mass
0 to 80°C / 32 to 176°F
0.1%
0.1°C / 0.1°F
±0.2%
±0.3°C / ±0.5°F
yellow LED
approximately 1.5 seconds
100 µL (cover prism totally)
SS ring and flint glass prism
automatic between
10 and 40°C / 50 to 104°F
ABS
IP 65
1 x 9V AA (included)
5000 reading
after 3 minutes of non-use
192 x 102 x 67 mm
420 g
Ordering Information
Stainless Steel Sample
Well and Prism
MA871, MA872, MA873 and MA881 are supplied complete with
Mi0005 9V battery and instruction manual.
Place a few drops of the sample in
the well and press the READ key.
www.milwaukeeinst.com
43
Digital
Refractometers
MA882/MA883/MA884/MA885
Digital Refractometers for
Grape Juice Must Measurements
New
The MA882, MA883, MA884 and MA885 are optical instruments that are based on the measurement of the refractive
index of a solution. The measurement of refractive index is
simple and quick and provides the vintner an accepted
method for sugar content analysis. Samples are measured
after a simple user calibration with deionized or distilled
water. Within seconds the instrument measures the refractive index of the grape. This digital refractometers eliminate
the uncertainty associated with mechanical refractometers and are easily portable for measurements in the
field. The four instruments utilize internationally
recognized references for unit conversion and
temperature compensation.
• MA882 measures %Brix;
• MA883 measures °Baumé;
• MA884 measures %Brix and Potential
Alcohol (% vol);
• MA885 measures %Brix, °Oechsle
(°Oe) and °KMW (°Babo).
Temperature (in °C or °F) is displayed simultaneously
with the measurement on the large dual level display along
with icons for Low Power and other helpful message codes.
Key features include:
• Dual-level LCD
• Automatic Temperature Compensation (ATC)
• Easy setup and storage
• Battery operation with Low Power indicator (BEPS)
• Automatically turns off after 3 minutes of non-use
Specifications
MA882
MA883
MA884
MA885
Range
0 to 50% Brix
0 to 80°C / 32 to 176°F
0 to 28 °Baumé
0 to 80°C / 32 to 176°F
0 to 50% Brix
0 to 25% v/v Potential Alcohol
0 to 80°C / 32 to 176°F
Resolution
0.1% Brix
0.1°C / 0.1 °F
0.1 °Baumé
0.1°C / 0.1 °F
0.1% Brix
0.1% v/v Potential Alcohol
0.1°C / 0.1°F
Accuracy
±0.2% Brix
±0.3°C / ±0.5°F
±0.1 °Baumé
±0.3°C / ±0.5°F
±0.2% Brix
±0.2 v/v Potential Alcohol
±0.3°C / ±0.5°F
Light Source
Measurement Time
Minimum Sample Volume
Sample Cell
Temperature Compensation
yellow LED
approximately 1.5 seconds
100 µL (cover prism totally)
SS ring and flint glass prism
automatic between
10 and 40°C /50 to 104°F
ABS AB
IP 65
1 x 9V AA (included)
5000 reading
after 3 minutes of non-use
192 x 102 x 67 mm
420 g
yellow LED
approximately 1.5 seconds
100 µL (cover prism totally)
SS ring and flint glass prism
automatic between
10 and 40°C /50 to 104°F
S
IP 65
1 x 9V AA (included)
5000 reading
after 3 minutes of non-use
192 x 102 x 67 mm
420 g
yellow LED
approximately 1.5 seconds
100 µL (cover prism totally)
SS ring and flint glass prism
automatic between
10 and 40°C /50 to 104°F
ABS
IP 65
1 x 9V AA (included)
5000 reading
after 3 minutes of non-use
192 x 102 x 67 mm
420 g
0 to 50% Brix
0 to 230°Oechsle
0 to 42 °KMW
0 to 80°C / 32 a 176°F
0.1% Brix
0.1 °Oechsle
0.1 °KMW
0.1°C / 0.1°F
±0.2% Brix
±1°Oechsle
±0.2 °KMW
±0.3°C / ±0.5°F
yellow LED
approximately 1.5 seconds
100 µL (cover prism totally)
SS ring and flint glass prism
automatic between
10 and 40°C /50 to 104°F
ABS
IP 65
1 x 9V AA (included)
5000 reading
after 3 minutes of non-use
192 x 102 x 67 mm
420 g
Case Material
Enclosure Rating
Battery Type
Battery Life
Auto-shut off
Dimensions
Weight
Ordering Information
MA882, MA883, MA884 and MA885 are supplied complete with
Mi0005 9V battery and instruction manual.
44
www.milwaukeeinst.com
Digital
Refractometers
MA886
Digital Refractometer
for Sodium Chloride Measurements
New
The MA886 is an optical instrument that employs the measurement of the refractive index to determine sodium chloride
concentration in aqueous solutions used in food preparation.
It is not intended for sea water salinity measurements.
The measurement of refractive index is simple and quick
and provides the user an accepted method for NaCl
analysis. Samples are measured after a simple user
calibration with deionized or distilled water. Within
seconds the instrument measures the refractive
index of the solution.
The digital refractometer eliminates the uncertainty associated with mechanical refractometers and is easily portable for measurements
where you need them.
The instrument utilizes internationally recognized references for unit conversion and temperature compensation. It can display the
measurement of NaCl concentration 4 different ways: g/100 g, g/100 mL, Specific Gravity,
and °Baumé. Temperature (in °C or °F) is displayed simultaneously with the measurement
(on 3 of the ranges) on the large dual level display along with icons for Low Power and other
helpful message codes.
Key features include:
• Dual-level LCD
• Automatic Temperature Compensation (ATC)
• Easy setup and storage
• Battery operation with Low Power indicator (BEPS)
• Automatically turns off after 3 minutes of non-use
Specifications
MA886
Range
0 to 28 g/100 g
0 to 34 g/100 ml
1.000 to 1.216 Specific Gravity
0 to 26 °Baumé
0 to 80°C / 32 to 176°F
0.1 g/100 g
0.1 g/100 ml
0.001 Specific Gravity
0.1 °Baumé
0.1°C / 0.1°F
±0.2 g/100 g
±0.2 g/100 ml
±0.002 Specific Gravity
±0.2 °Baumé
±0.3°C / ±0.5°F
yellow LED
approximately 1.5 seconds
100 µL (cover prism totally)
SS ring and flint glass prism
automatic between 10 and 40°C (50 to 104°F)
ABS
IP 65
1 x 9V AA (included)
5000 reading
after 3 minutes of non-use
192 x 102 x 67 mm
420 g
Resolution
Accuracy
Light Source
Measurement Time
Minimum Sample Volume
Sample Cell
Temperature Compensation
Case Material
Enclosure Rating
Battery Type
Battery Life
Auto-shut off
Dimensions
Weight
Stainless Steel Sample
Well and Prism
Place a few drops of the sample in
the well and press the READ key.
Liquid Cristal Display
(LCD)
Dual Level LCD with Primary and
Secondary Display.
Ordering Information
MA886 is supplied complete with Mi0005 9V battery and instruction manual.
www.milwaukeeinst.com
45
Digital
Refractometers
MA887
Digital Refractometer for Seawater Measurements
New
The MA887 is an optical instrument that employs the measurement of the refractive index to determine the salinity of
natural and artificial seawater, ocean water or brackish intermediates.
The digital refractometer eliminates the uncertainty associated with mechanical refractometers and is easily portable for
ship, shore or home use.
The MA887 refractometer is an optical device that is simple
and quick to use. Samples are measured after a simple user
calibration with distilled or deionized water. Within seconds, the refractive index and temperature are
measured and converted into one of three popular measurement units; Practical Salinity
Units (PSU), Salinity in parts per thousand
(ppt), or Specific Gravity (S.G. (20/20)).
All conversion algorithms are based upon
respected scientific publications using the
physical properties of seawater (not sodium
chloride). The temperature (in °C or °F) is also
displayed on the large dual level display along
with helpful message codes.
Key features include:
• Dual-level LCD
• Automatic Temperature Compensation (ATC)
• Easy setup and storage
• Battery operation with Low Power indicator (BEPS)
• Automatically turns off after 3 minutes of non-use
Specifications
MA887
Range
0 to 50 PSU
0 to 150 ppt
1.000 to 1.114 S.G. (20/20)
0 to 80°C / 32 to 176°F
1 PSU
1 ppt
0.001 S.G. (20/20)
0.1°C / 0.1°F
±2 PSU
±2 ppt
±0.002 S.G. (20/20)
±0.3°C / ±0.5°F
yellow LED
approximately 1.5 seconds
100 µL (cover prism totally)
SS ring and flint glass prism
automatic between 10 and 40°C (50 to 104°F)
ABS
IP 65
1 x 9V AA (included)
5000 reading
after 3 minutes of non-use
192 x 102 x 67 mm
420 g
Resolution
Accuracy
Light Source
Measurement Time
Minimum Sample Volume
Sample Cell
Temperature Compensation
Case Material
Enclosure Rating
Battery Type
Battery Life
Auto-shut off
Dimensions
Weight
Stainless Steel Sample
Well and Prism
Place a few drops of the sample in
the well and press the READ key.
Liquid Cristal Display
(LCD)
Dual Level LCD with Primary and
Secondary Display.
Ordering Information
MA887 is supplied complete with Mi0005 9V battery and instruction manual.
46
www.milwaukeeinst.com
Digital
Refractometers
MA888
Digital Refractometer for Ethylene Glycol Measurements
The MA888 is an optical instrument that employs the measurement of the refractive index to determine the % volume
and freezing point of ethylene glycol based coolants or
antifreeze.
New
The digital refractometer eliminates the uncertainty associated with mechanical refractometers and is easily portable for
use in the field to optimize your cooling system.
The MA888 refractometer is an optical device that is simple
and quick to use. Samples are measured after a simple
user calibration with distilled or deionized water. Within
seconds, the refractive index and temperature are
measured and converted into one of two measurement units; % Volume or Freezing Point.
The instrument utilizes internationally recognized
references for unit conversion and temperature
compensation for ethylene glycol solutions (e.g.
CRC Handbook of Chemistry and Physics, 87th
Edition).
The temperature (in °C or °F) is also displayed on
the large dual level display along with helpful
message codes.
Key features include:
• Dual-level LCD
• Automatic Temperature Compensation (ATC)
• Easy setup and storage
• Battery operation with Low Power indicator
(BEPS)
• Automatically turns off after 3 minutes of non-use
Specifications
MA888
Range
0 to 100% Volume
0 to -50 °C / 32 to -58 °F Freezing Point
0 to 80°C / 32 to 176°F
0.1% Volume
0.1°C / 0.1°F Freezing Point
0.1°C / 0.1°F
±0.2% Volume
±0.5°C / ±1.0°F Freezing Point
±0.3°C / ±0.5°F
yellow LED
approximately 1.5 seconds
100 µL (cover prism totally)
SS ring and flint glass prism
automatic between 10 and 40°C (50 to 104°F)
ABS
IP 65
1 x 9V AA (included)
5000 reading
after 3 minutes of non-use
192 x 102 x 67 mm
420 g
Resolution
Accuracy
Light Source
Measurement Time
Minimum Sample Volume
Sample Cell
Temperature Compensation
Case Material
Enclosure Rating
Battery Type
Battery Life
Auto-shut off
Dimensions
Weight
Stainless Steel Sample
Well and Prism
Place a few drops of the sample in
the well and press the READ key.
Liquid Cristal Display
(LCD)
Dual Level LCD with Primary and
Secondary Display.
Ordering Information
MA888 is supplied complete with Mi0005 9V battery and instruction manual.
www.milwaukeeinst.com
47
Electrodes
Electrodes & Probes
pH, ORP, Conductivity, Dissolved Oxygen
Milwaukee has a wide assortment of pH, ORP, Conductivity
and other specialty sensors to meet all your specific
requirements.
Finding the right electrode for a specific application is a
very important task and in order to solve this selection
problem it is important to consider the following: electrode body, reference construction and junction.
Below you will find a list of Milwaukee electrodes and probes
with corresponding instruments they are supplied with.
OTHERS ELECTRODES & PROBES
48
SE220
Double junction pH electrode with 1 meter cable and gel filled elec
trolyte solution (MW100 & MW101& MW102)
SE300
Double junction orp platinum electrode with 1 meter cable and gel
filled electrolyte solution (MW500)
SE510
Conductivity/TDS probe with 1 meter cable (MW301 &
MW401)
SE520
Conductivity/TDS probe with 1 meter cable (MW302 & MW402)
SE600
Combination probe for pH/EC/TDS with 1 meter cable for MW801
and MW802.
MA811D/1
Conductivity/TDS probe with DIN connector and 1 meter cable
(for SM301 & SM401)
MA811/2
Conductivity/TDS probe with 2 meter cable
(for SMS310)
MA812D/1
Conductivity/TDS probe with DIN connector and 1 meter cable
(for SM302 & SM402)
MA812/2
Conductivity/TDS probe with 2 meter cable
(for SMS410)
MA814DB/1
4-ring Conductivity/TDS/NaCl/Temperature probe
with DIN connector and 1 meter cable
(for Mi170 & Mi180)
MA814D/1
4-ring Conductivity/TDS/NaCl/Temperature probe
with DIN connector and 1 meter cable
(for Mi306)
MA815/2
Conductivity probe with 2 meter cable
(for SMS315)
MA816/2
TDS probe with 2 meter cable
(for SMS415)
MA831R
Stainless steel Temperature probe
MA840
Polarographic D.O. probe with 3 meter cable
(for SMS600 & Mi605)
MA850
Combination spare probe for pH/Conductivity/TDS
with 1 meter cable
(for SM801 & SM802)
MA851D/1
pH/Conductivity/TDS/Temperature amplified probe
with DIN connector and 1 meter cable
(for Mi805 & Mi806)
www.milwaukeeinst.com
Electrodes
Electrode Selection Guide
pH, ORP, Conductivity, Dissolved Oxygen
Milwaukee has a wide assortment of pH, ORP,
Conductivity and other specialty sensors to
meet all your specific requirements.
Before selecting an electrode, please consult
the table below. The recommended electrodes
are the ones best suited to each application, however we
also ask you to verify the specifications on pages 6-7-8-9
Agriculture / Soil testing
Aquarium
Cheese
Dairy products
Emulsions
Environmental, Pollution
Fish farming
Food and beverage (general use)
Galvanizing waste solution
Hi purity water
Heavy duty applications
In-line applications
Laboratory (general use)
Meat
Paints
Paper
Photographic chemicals
Strong acid
Swimming pools
Water supply
Wine processing
www.milwaukeeinst.com
49
MA840
D.O.
MA813D/1
MA818/5
Conductivity
MA924B/1
MA923B/3
SE300
MA921B/1
ORP
MA991B/1
MA923D/1
MA920B/1
MA919B/1
MA918B/1
MA917B/1
MA916B/3
MA916B/1
MA915B/2
MA914BR/1
MA913B/3
SE220
MA911B/1
pH
Applications
MA905B/3
Special electrodes for specific applications can also be
manufactured upon request.
Test Kit
pH Electrode
Storage and Maintenance
Plastic body
pH electrode
Glass body
pH electrode
Fill hole screw
Reference
fill hole
Fill hole
sleeve cover
Reference
fill hole
Reference
fill hole
Sensitive wire
Reference
wire
Reference
wire
Sensitive
wire
Reference
junction
Reference
junction
Platinum or
gold tip
Glass bulb
pH Electrode Storage and Maintenance
To ensure a quick response and free-flowing liquid junction, the sensing element and reference junction must not
be allowed to dry out. The following instructions apply to
refillable electrodes. For gel-filled electrodes, consult
instruction manual.
Routine Storage
Soak electrode in a pH Electrode Storage Solution
(MA9015). If a storage solution is unavailable, pH 4 buffer
or pH7.01 may be used. The fill hole should be covered
to prohibit evaporation of reference fill solution.
Maintenance
Cleaning your electrode between and after use will help
extend the life of your electrode and avoid the cost of early
replacement.
Routine Cleaning
Soak electrode in MA9016 cleaning solution for half an
hour, followed by soaking it in storage solution (MA9015)
for at least two hours.
Weekly Maintenance
Inspect electrodes for scratches, cracks, salt crystal
buildup, or membrane/junction deposits.
Rinse off any salt buildup with distilled water, and remove
any membrane/junction deposits as directed in cleaning
procedures below.
The reference chamber should be drained, flushed with
fresh filling solution, and refilled.
MT6003
NPK Soil Test Kit
The primary nutrients essential to plant growth and quality are Nitrogen, Phosphorous and Potassium.
N is associated with plant growth above the ground, P is
responsible for flower and fruit production as well as
overall plant health. K promotes disease
resistance, water intake and strong
root growth.
This kit provides accurate and professional tests and includes 25 sachets of
Nitrogen (MT5009), Phosphorous
(MT5010) and Potassium (MT5002),
3 x 100 mL bottles of extraction solution and 5 plastic test tubes. All
results are compared to standards on laminated colour
charts.
50
www.milwaukeeinst.com
Testers
pH600/CD600/CD601/CD610/CD611/CD97
pH/EC & TDS Economical Pocket Testers
Milwaukee's economical testers are easy-to-use and low
cost instruments to measure quick and reliable pH, EC or
TDS values.
Measuring electrical conductivity is the best way of checking
the amount of salt or dissolved solids (TDS) in water.
Milwaukee provides you with a range of pocket testers that
will allow you to measure from very low to very high conductivity solutions.
All EC/TDS testers compensate for the temperature variance
automatically.
Specifications
Range
Resolution
Accuracy
Calibration
Temperature Compensation
Environment
Battery Type / Battery Life
Dimensions / Weight
pH600
CD600
CD601
0.0 to 14.0 pH
0.1 pH
±0.1 pH
manual, 1 point
0 to 1990 ppm
10 ppm
±2% full scale
0 to 1990 µS/cm
10 µS/cm
±2% full scale
0 to 50°C / 32 to 122°F; max RH 95%
3 x 1.5V, alkaline / 700 hours of use
150 x 30 x 24 mm / 85 g
automatic from 5 to 50°C
0 to 50°C / 32 to 122°F; max RH 95%
4 x 1.5V, alkaline / 350 hours of use
150 x 30 x 24 mm / 85 g
automatic from 5 to 50°C
0 to 50°C / 32 to 122°F; max RH 95%
4 x 1.5V, alkaline / 350 hours of use
150 x 30 x 24 mm / 85 g
CD610
CD611
CD97
0 to 10000 ppm
100 ppm
±2% full scale
automatic from 5 to 50°C
0 to 50°C / 32 to 122°F; max RH 95%
4 x 1.5V, alkaline / 350 hours of use
150 x 30 x 24 mm / 85 g
0 to 20000 µS/cm
100 µS/cm
±2% full scale
automatic from 5 to 50°C
0 to 50°C / 32 to 122°F; max RH 95%
4 x 1.5V, alkaline / 350 hours of use
150 x 30 x 24 mm / 85 g
0 to 1000 ppm
1 ppm
±10 ppm
automatic from 5 to 50°C
0 to 50°C / 32 to 122°F; max RH 95%
4 x 1.5V, alkaline / 350 hours of use
150 x 30 x 24 mm / 85 g
Specifications
Range
Resolution
Accuracy
Temperature Compensation
Environment
Battery Type / Battery Life
Dimensions / Weight
Accessories
M10004B pH 4.01 buffer solution 20 mL
sachet (25 pcs)
M10007B pH 7.01 buffer solution 20 mL
sachet (25 pcs)
M10010B pH 10.01 buffer solution, 20 mL
sachet (25 pcs)
M10030B 12880 µS/cm calibration
solution, 20 mL (25 pcs)
M10031B 1413 µS/cm calibration
solution, 20 mL (25 pcs)
Ordering Information
M10032B 1382 ppm (mg/L) calibration
solution, 20 mL (25 pcs)
M10038B 6.44 ppt (g/L) calibration solution,
20 mL (25 pcs)
M10080B 800 ppm calibration solution
20 mL (25 pcs)
MA9015 Electrode storage solution, 230 mL
MA9016 Electrode cleaning solution, 230 mL
M10000B Electrode rinse solution, 20 mL
(25 pcs)
www.milwaukeeinst.com
pH600, CD600, CD601, CD610, CD611 and CD97 are
supplied complete with protective cap, calibration screwdriver, batteries and instructions.
51
Calibration
Solutions
Calibration, Maintenance & Cleaning
Solutions
Milwaukee offers a wide range of calibration, maintenance &
Cleaning solutions.
The use of calibration and cleaning solutions is fundamental
for the correct use of electrodes and for obtaining the most
accurate and reproducible readings. Often readings are not
correct because the sensors have not been properly handled.
Milwaukee standard solutions are available in 230 mL bottles and 20 mL sachets.
Traditional buffer solutions are packed in 230 mL leak-proof
bottles and are recommended for lab applications.
Sachets are sealed against light and air and are ideal for onthe-spot calibration.
Simply open, insert the tester or electrode into the sachet
and calibrate. Sachets are sold in boxes of 25 pieces.
Calibration, Maintenance & Cleaning Solutions
MA9001
MA9004
MA9006
MA9007
MA9009
MA9010
MA9011
MA9012
MA9015
MA9016
MA9020
MA9060
MA9061
MA9062
MA9063
MA9064
MA9065
MA9066
MA9069
MA9070
MA9071
MA9112
pH 1.68 Calibration Buffer Solution, 230 mL
pH 4.01 Calibration Buffer Solution, 230 mL
pH 6.86 Calibration Buffer Solution, 230 mL
pH 7.01 Calibration Buffer Solution, 230 mL
pH 9.18 Calibration Buffer Solution, 230 mL
pH 10.01 Calibration Buffer Solution, 230 mL
Refilling Electrolyte Solution 3.5M KCl for pH/ORP electrodes, 230 mL
Refilling Electrolyte Solution 1M KNO 3
for double junction electrodes, 230 mL
Storage Solution for pH/ORP electrodes, 230 mL
Cleaning Solution for pH/ORP electrodes, 230 mL
200-275 mV ORP Solution, 230 mL
12880 µS/cm Conductivity Calibration Solution, 230 mL
1413 µS/cm Conductivity Calibration Solution, 230 mL
1382 ppm TDS Calibration Solution, 230 mL
84 µS/cm Conductivity Calibration Solution, 230 mL
80000 µS/cm Conductivity Calibration Solution, 230 mL
111.8 mS/cm Conductivity Calibration Solution, 230 mL
100% NaCl Calibration Solution, 230 mL
5000 µS/cm Conductivity Calibration Solution, 230 mL
Zero Oxygen Solution, 230 mL
Electrolyte Solution for D.O. Probes, 230 mL
pH 12.45 Calibration Buffer Solution, 230 mL
M10000B
M10004B
M10006B
M10007B
M10009B
M10010B
M10016B
M10030B
Rinse Solution - Deionized Water (box of 25x20 ml sachet)
pH 4.01 Calibration Buffer Solution (box of 25x20 ml sachet)
pH 6.86 Calibration Buffer Solution (box of 25x20 ml sachet)
pH 7.01 Calibration Buffer Solution (box of 25x20 ml sachet)
pH 9.18 Calibration Buffer Solution (box of 25x20 ml sachet)
pH 10.01 Calibration Buffer Solution (box of 25x20 ml sachet)
Cleaning Solution for electrodes (box of 25x20 ml sachet)
12880 µS/cm Conductivity Calibration Solution
(box of 25x20 ml sachet)
M10031B 1413 µS/cm Conductivity Calibration Solution
(box of 25x20 ml sachet)
M10032B 1332 ppm TDS Calibration Solution (box of 25x20 ml sachet)
M10033B 84 µS/cm Conductivity Calibration Solution
(box of 25x20 ml sachet)
M10035B 111.8 mS/cm Conductivity Calibration Solution
(box of 25x20 ml sachet)
M10038B 6.44 ppt TDS Calibration Solution (box of 25x20 ml sachet)
M10442B 1500 ppm TDS Calibration Solution (box of 25x20 ml sachet)
M10080B 800 ppm TDS Calibration Solution (box of 25x20 ml sachet)
M100020B Cal-Test Solution for SMS315 (box of 25x20 ml sachet)
M100040B Cal-Test Solution for SMS415 (box of 25x20 ml sachet)
M100058B Cal-Test Solution for SMS115 (box of 25x20 ml sachet)
Certified Solutions
For those operators who request it, we provide standard solutions complete with certificate of analysis, prepared against NIST standards, to
avoid any possible error in determining the actual value. The certificates show the date of production, batch number, accuracy rating and
the expiration date.
52
www.milwaukeeinst.com
Warranty
WARRANTY POLICY
Milwaukee warrants it’s instruments to be free of manufacturing defects as follows: bench meters for 3 years, portable
and pocket testers for 2 years and electrode/sensors for 6
months (unless otherwise specified).
The warranty period commences from the original date of
sale to the user. Warranty is valid only when the product is
used under normal conditions and in accordance with the
operating limitations and prescribed maintenance procedures.
Bench Meters
Miwaukee reserves the right to make improvements in
design, construction and appearence of its products without
advance notice.
Instrument service
Warranty and non-warranty service are performed by our
technicians in Milwaukee headquarters. All items must have
a Return Goods Authorization (RGA) number before returning the goods. This number can be obtained by contacting
the Milwaukee technical service department at:
Portable Meters
tech@milwaukeeinst.com
All products returned without an RGA
refused.
number will be
FURTHER INFORMATION
Latest updates on new products, technical tips,
download of MSDS and free software updates.
Visit our website at:
www.milwaukeeinst.com
for the latest updates on new products, technical tips,
download of MSDS, as well as free software updates.
SPECIFIC APPLICATION LITERATURE
Latest updates on new products, technical tips,
download of MSDS and free software updates.
Specific application catalogues and leaflets are also
available. Please kindly send us an e-mail at:
info@milwaukeeinst.com
www.milwaukeeinst.com
53