Samsung LTN1785W Operating instructions

01.cover
6/27/03 4:15 AM
Page 1
TFT-LCD TELEVISION LTN1785W
BN68-00437A-01
LTN1785W
01.Safety+Contents
6/27/03 2:03 AM
Page 2
Thank You for Choosing Samsung
Thank you for choosing Samsung! Your new Samsung TV represents the latest in television
technology. We designed it with easy-to-use on-screen menus and closed captioning
capabilities, making it one of the best products in its class. We are proud to offer you a product
that will provide convenient, dependable service and enjoyment for years to come.
Important Safety Information
Always be careful when using your TV receiver. To reduce the risk of fire, electrical shock,
and other injuries, keep these safety precautions in mind when installing, using, and
maintaining your machine.
• Read all safety and operating instructions before operating your TV.
• Keep the safety and operating instructions for future reference.
• Heed all warnings on the TV receiver and in the operating instructions.
• Follow all operating and use instructions.
• Unplug the TV receiver from the wall outlet before cleaning.
Use a damp cloth; do not use liquid or aerosol cleaners.
• Never add any attachments and/or equipment without approval of the manufacturer.
Such additions can increase the risk of fire, electric shock, or other personal injury.
• Do not use the TV receiver where contact with or immersion in water is a possibility,
such as near bath tubs, sinks, washing machines, swimming pools, etc.
• Do not place the TV on an unstable cart, stand, tripod, bracket, or
table where it can fall. A falling TV can cause serious injury to a
child or adult, and serious damage to the appliance. Use only with
a cart, stand, tripod, bracket, or table recommended by the
manufacturer or sold with the TV. Follow the manufacturer’s
instructions when mounting the unit, and use a mounting
accessory recommended by the manufacturer. Move the TV and
cart with care. Quick stops, excessive force, and uneven surfaces
can make the unit and cart unsteady and likely to overturn.
• Provide ventilation for the TV receiver. The unit is designed with
slots in the cabinet for ventilation to protect it from overheating. Do not block these openings
with any object, and do not place the TV receiver on a bed, sofa, rug, or other similar surface.
Do not place it near a radiator or heat register. If you place the TV receiver on a rack or
bookcase, ensure that there is adequate ventilation and that you’ve followed the
manufacturer’s instructions for mounting.
• Operate your TV receiver only from the type of power source indicated on the marking label.
If you are not sure of the type of power supplied to your home, consult your appliance dealer
or local power company.
• Use only a grounded or polarized outlet. For your safety, this TV is equipped with a
polarized alternating current line plug having one blade wider than the other. This plug will
fit into the power outlet only one way. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug still does not fit, contact your electrician to replace
your outlet.
Safety
1
01.Safety+Contents
6/27/03 2:03 AM
Page 3
• Protect the power cord. Power supply cords should be routed so that they won’t be walked on
or pinched by objects placed on or against them. Pay particular attention to cords at plugs,
convenience receptacles, and the point where they exit from the unit.
• Unplug the TV from the wall outlet and disconnect the antenna or cable system during a
lightning storm or when left unattended and unused for long periods of time.
This will prevent damage to the unit due to lightning and power-line surges.
• Avoid overhead power lines. An outside antenna system should not be placed in the vicinity
of overhead power lines or other electric light or power circuits or where it can fall into such
power lines or circuits. When installing an outside antenna system, be extremely careful to
keep from touching the power lines or circuits. Contact with such lines can be fatal.
• Do not overload the wall outlet or extension cords.
Overloading can result in fire or electric shock.
• Do not insert anything through the openings in the unit, where they can touch dangerous
voltage points or damage parts. Never spill liquid of any kind on the TV.
• Ground outdoor antennas. If an outside antenna or
cable system is connected to the TV, be sure the
antenna or cable system is grounded so as to provide
some protection against voltage surges and built-up
static charges. Section 810 of the National Electrical
Code, ANSI/NFPA No.70-1984, provides information
about proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna
discharge unit, size of grounding conductors, location
of antenna discharge unit, connection to grounding
electrodes, and requirements for the grounding
electrode.
• Do not attempt to service the TV yourself. Refer all servicing to qualified service personnel.
Unplug the unit from the wall outlet and refer servicing to qualified service personnel under
the following conditions:
- when the power-supply cord or plug is damaged
- if liquid has been spilled on the unit or if objects have fallen into the unit
- if the TV has been exposed to rain or water
- if the TV does not operate normally by following the operating instructions
- if the TV has been dropped or the cabinet has been damaged
- when the TV exhibits a distinct change in performance
• If you make adjustments yourself, adjust only those controls that are covered by the
operating instructions. Adjusting other controls may result in damage and will often require
extensive work by a qualified technician to restore the TV to normal.
• When replacement parts are required, be sure the service technician uses replacement parts
specified by the manufacturer or those that have the same characteristics as the original part.
Unauthorized substitutions may result in additional damage to the unit.
• Upon completion of any service or repairs to this TV, ask the service technician to
perform safety checks to determine that the TV is in a safe operating condition.
Safety
2
01.Safety+Contents
6/27/03 2:03 AM
Page 4
• Keep all power adapters apart.
➔ Possible fire hazard.
• Keep power adapter away from any other heat source.
➔ Possible fire hazard.
• Remove and discard vinyl bag from power adapter before use.
➔ Possible fire hazard.
• Always keep power adapters in well-ventilated area.
Safety
3
01.Safety+Contents
6/27/03 2:03 AM
Page 5
CAUTION
This symbol indicates high voltage is
present inside. It is dangerous to make
any kind of contact with any inside part
of this product.
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELEC
TRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This symbol alerts you that important
literature concerning operation and
maintenance has been included with this
product.
Note to CATV system installer: This reminder is provided to call CATV system
installer’s attention to Article 820-40 of the National Electrical Code (Section 54 of
Canadian Electrical Code, Part I), that provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be connected to the grounding
system of the building as close to the point of cable entry as practical.
Caution: FCC/CSA regulations state that any unauthorized changes or modifications
to this equipment may void the user’s authority to operate it.
Caution: To prevent electric shock, match the wide blade of plug to the wide slot, and
fully insert the plug.
Attention: pour eviter les chocs electriques, introduire la lame le plus large de la
fiche dans la borne correspondante de la prise et pousser jusqu’au fond.
Important: One Federal Court has held that unauthorized recording of
copyrighted TV programs is an infringement of U.S. copyright laws.
Certain Canadian programs may also be copyrighted and any unauthorized recording
in whole or in part may be in violation of these rights.
To prevent damage which may result in fire or electric shock
hazard, do not expose this appliance to rain or moisture.
As an ENERGY STAR Partner.
Samsung Electronics America, Inc. has determined that this product or product
model meets the ENERGY STAR guidelines for energy efficiency.
Safety
4
01.Safety+Contents
6/27/03 2:03 AM
Page 6
FCC Information
User Instructions
Warning
The Federal Communications Commission Radio
Frequency Interference Statement includes the
following warning:
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation.
User must use shielded signal interface cables to
maintain FCC compliance for the product.
Provided with this monitor is a detachable power
supply cord with IEC320 style terminations.
It may be suitable for connection to any UL Listed
personal computer with similar configuration.
Before making the connection, make sure the voltage rating of the computer convenience outlet is
the same as the monitor and that the ampere rating of the computer convenience outlet is equal to
or exceeds the monitor voltage rating.
For 120 Volt applications, use only UL Listed
detachable power cord with NEMA configuration
5-15P type (parallel blades) plug cap. For 240 Volt
applications use only UL Listed Detachable power
supply cord with NEMA configuration 6015P type
(tandem blades) plug cap.
If this equipment does cause harmful interference
to radio or television receptions, which can be
determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
User Information
Changes or modifications not expressly approved
by the party responsible for compliance could
void the user’s authority to operate the equipment.
If necessary, consult your dealer or an experienced radio/television technician for additional
suggestions. You may find the booklet called How
to Identify and Resolve Radio/TV Interference
Problems helpful. This booklet was prepared by
the Federal Communications Commission. It is
available from the U.S. Government Printing
Office, Washington, DC 20402, Stock Number
004-000-00345-4.
The party responsible for product compliance:
SAMSUNG ELECTRONICS CO., LTD
America QA Lab of Samsung
3351 Michelson Drive,
Suite #290, Irvine, CA92612 USA
IC Compliance Notice
This Class B digital apparatus meets all requirements of the Canadian nterference-Causing
Equipment Regulations of ICES-003.
Cet appareil Numérique de classe B respecte
toutes les exigences du Règlemont NMB-03 sur
les équipements produisant des interférences au
Canada.
Notice de Conformité IC
Cet appareil numérique de classe B respecte
toutes les exigences du Règlement ICES-003 sur
les équipements produisant des interférences au
Canada.
VCCI
This is a Class B product based on the standard
of the Voluntary Control Council for Interference
by Information Technology Equipment (VCCI). If
this is used near a radio or television receiver in a
domestic environment, it may cause radio interference. Install and use the equipment according to
the instruction manual.
This Class B digital apparatus complies with
Canadian ICES-003. Cet appareil numéique de la
classe B estconforme à la norme NMB-003 du
Canada.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause unesired operation.
This television receiver provides display of television closed captioning in accordance with §15.119 of the FCC rules.
Safety
5
01.Safety+Contents
6/27/03 2:03 AM
Page 7
Important Warranty Information
Regarding Television Format
Viewing
Standard screen format televisions (4:3, the aspect ratio of the screen width to height) are primarily
designed to view standard format full-motion video. The images displayed on them should primarily
be in the standard 4:3 ratio format and constantly moving.
Displaying stationary graphics and images on screen, such as the dark top and bottom letterbox bars
(wide screen pictures), should be limited to no more than 15% of the total television viewing per week.
Wide screen format televisions (16:9, the aspect ratio of the screen width to height) are primarily
designed to view wide screen format full-motion video. The images displayed on them should primarily
be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature,
and constantly moving. Displaying stationary graphics and images on screen, such as the dark
side-bars on non-expanded standard format television video and programming, should be limited to
no more than 15% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game
displays, station logos, web sites or computer graphics and patterns, should be limited as described
above for all televisions. Displaying any stationary images that exceed the above guidelines can
cause uneven aging of picture tubes (LCDs) that leave subtle, but permanent burned-in ghost images
in the television picture. To avoid this, vary the programming and images, and primarily display full
screen moving images, not stationary patterns or dark bars. On television models that offer picture
sizing features, use these controls to view the different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging
as a result of format selection and use, as well as other burned-in images, is not covered by your
Samsung limited warranty.
[Note]
If a still image is displayed for an extended period of time, residual images or blurring may appear.
When you need to leave the monitor unused for an extended period of time, adjust the settings so
that the monitor automatically goes into energy saving mode or activates the screen saver to display
moving images.
Safety
6
01.Safety+Contents
6/29/03 3:25 AM
Page 8
CONTENTS
Chapter 1: Your New TV
List of Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
List of Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Familiarizing Yourself with Your New TV . . . . . . . . . . . . . . . . . . . . . . .2
Top Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Rear Panel Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Installing Batteries in the Remote Control . . . . . . . . . . . . . . . .6
The remote control doesn’t work . . . . . . . . . . . . . . . . . . . . . . .6
Chapter 2: Installation
Connecting VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Antennas with 300-ohm Flat Twin Leads . . . . . . . . . . . . . . . . .7
Antennas with 75-ohm Round Leads . . . . . . . . . . . . . . . . . . . .8
Separate VHF and UHF Antennas . . . . . . . . . . . . . . . . . . . . . .8
Connecting Cable TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Cable without a Cable Box . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Connecting to a Cable Box that Descrambles All Channels . . .9
Connecting to a Cable Box that Descrambles Some Channels . .9
Connecting a VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Connecting an S-VHS VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Connecting a DVD Player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Connecting a PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Chapter 3: Special Features
Turning the TV On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Changing Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Using the Channel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Using the Pre-CH Button to select the Previous Channel . . .15
Adjusting the Volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Using Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Viewing the Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Viewing the Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Chapter 4: Operation
Plug & Play Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Memorizing the Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Selecting the Video Signal-source . . . . . . . . . . . . . . . . . . . . .18
Storing Channels in Memory (Automatic Method) . . . . . . . .19
To check the channels stored in memory . . . . . . . . . . . . . . . .19
To select channels over 100 . . . . . . . . . . . . . . . . . . . . . . . . . .19
ADD and DEL Channels (Manual Method) . . . . . . . . . . . . . .20
To Select TV/Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
To Edit the Input Source Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Using Automatic Picture Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
Customizing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Using Automatic Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Customizing the Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Selecting a Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Setting the Blue Screen Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Contents
1
01.Safety+Contents
6/27/03 5:43 AM
Page 9
CONTENTS
Fine Tuning Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Viewing Picture-in-Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Activating Picture-in-Picture . . . . . . . . . . . . . . . . . . . . . . . . .29
PIP Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Selecting a Signal Source (External A/V) for PIP . . . . . . . . .30
Swapping the Contents of the PIP and Main image . . . . . . . .30
Changing the PIP Channel . . . . . . . . . . . . . . . . . . . . . . . . . . .30
Changing the Location of the PIP Window . . . . . . . . . . . . . .30
Changing the Size of the PIP Window . . . . . . . . . . . . . . . . . .30
Changing the Screen Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Freezing the Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31
Adjusting the Color Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
For automatic volume control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
To select the WOW option. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Special Sound Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Selecting the Main or Sub Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Adjusting the Headphone Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Setting the Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Setting the On/Off Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Setting the Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Viewing Closed Captions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Using the V-Chip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Setting Up Your Personal ID Number (PIN) . . . . . . . . . . . . .43
How to Enable/Disable the V-Chip . . . . . . . . . . . . . . . . . . . . .44
How to Set up Restrictions Using the ‘TV guidelines’ . . . . .44
How to Set up Restrictions using the MPAA Ratings:
G, PG, PG-13, R, NC-17, X . . . . . . . . . . . . . . . . . . . . . . . . . .46
How to Reset the TV after the V-Chip
Blocks a Channel (‘Emergency Escape’) . . . . . . . . . . . . . . . .47
Chapter 5: PC Display
Using Your TV as a Computer (PC) Display . . . . . . . . . . . . . . . . . . . . .48
How to Set up Your PC Software (Windows only) . . . . . . . .48
Adjusting the Screen Quality . . . . . . . . . . . . . . . . . . . . . . . . .49
Changing the Screen Position . . . . . . . . . . . . . . . . . . . . . . . . .50
How to Auto Adjust . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Chapter 6: Troubleshooting
Identifying Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Appendix
How to assemble the TV set and stand base . . . . . . . . . . . . . . . . . . . . .54
Installing the Wall Mount Kit (sold separately) . . . . . . . . . . . . . . . . . .55
Using the Anti-Theft Kensington Lock . . . . . . . . . . . . . . . . . . . . . . . . .56
Retractable Stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Cleaning and Maintaining Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Using Your TV in Another Country . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58
Display Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
Contents
2
victoryia 01-14
6/27/03 2:04 AM
Page 1
Chapter One
Y O U R N E W TV
List of Features
Your TV was designed with the latest technology. This TV is a high-performance unit
that includes the following special features:
• Easy-to-use remote control
• Easy-to-use on-screen menu system
• Automatic timer to turn the TV on and off
• Adjustable picture and sound settings that can be stored in the TV’s memory
• Automatic channel tuning for up to 181 channels
• A special filter to reduce or eliminate reception problems
• Fine tuning control for the sharpest picture possible
• A built-in multi-channel sound decoder for stereo and bilingual listening
• Built-in, dual channel speakers
• Headphone jack for private listening
• 16:9 letter box format available depending upon source
List of Parts
Please make sure the following items are included with your LCD TV. If any items are
missing, contact your dealer.
Remote Control
(BN59-00362B) &
Batteries (AAA x 2)
Adapter
(BN44-00074A)
PC Video Cable
15-pin D-Sub Signal Cable
(BN39-00043A)
English-1
Power Cord
(BH39-10339X)
Owner’s
Instructions
victoryia 01-14
6/27/03 7:02 AM
Page 2
Y O U R N E W TV
Familiarizing Yourself with Your New TV
Top Panel Buttons
The buttons on the top panel control your TV’s basic features, including the on-screen
menu. To use the more advanced features, you must use the remote control.
TV/VIDEO
1
MENU
2
VOL
CH
3
4
POWER
5
6
7
8
TV/VIDEO
(See Page 20)
Displays a menu of all of the available
input sources (TV, VIDEO, S-VIDEO,
Component 1, Component 2, PC).
POWER
Press to turn the TV on and off.
SPEAKER
REMOTE CONTROL SENSOR
MENU
Press to see an on-screen menu of
your TV’s features.
Aim the remote control towards this spot
on the TV.
– VOL +
POWER INDICATOR
Press to increase or decrease the volume.
CH
Press to change channels.
Also press to highlight various items
on the on-screen menu.
English-2
Lights up when you turn the power off.
victoryia 01-14
6/27/03 7:02 AM
Page 3
Y O U R N E W TV
Rear Panel Jacks
Use the rear panel jacks to connect an A/V component that will be connected
continuously, such as a VCR or a DVD player.
For more information on connecting equipment, see pages 7-14.
6
7
11
8
9
10
3
1
2
4
5
POWER INPUT
VIDEO INPUT
PC VIDEO INPUT
Connect a video signal from a
camcorder or VCR.
Connect to the video output port on your PC.
COMPONENT 2
SUPER VIDEO INPUT
Connect a component video/audio.
Connect an S-Video signal from a
camcorder or VCR.
COMPONENT 1
PC SOUND INPUT
Connect a component video/audio.
TV ANTENNA
Connects to an antenna or to a cable
TV system.
AUDIO INPUT
HEADPHONE JACK
Connect a set of external headphones to
this jack for private listening.
KENSINGTON LOCK
(See page 56)
Connect audio signal(L/R) from a
camcorder or VCR.
English-3
victoryia 01-14
6/27/03 2:04 AM
Page 4
Y O U R N E W TV
Remote Control
Frequently Used Buttons
You can use the remote control up to a distance of about 23 feet from the TV.
When using the remote, always point it directly at the TV.
POWER
PC MODE
Turns the TV on and off.
(See Page 15)
1
6
P.MODE
2
7
Adjusts the TV picture by selecting
one of the preset factory settings.
(See Page 22)
Press to switch to the PC mode.
STILL
3
ASPECT
Use to toggle the five screen size
options among Wide, Panorama,
Zoom 1, Zoom 2 and Normal.
(See Page 31)
8
4
9
CH
and CH
(Channel UP/Down)
Press CH
channels.
or CH
to change
VOL + and VOL Press to increase or decrease
the volume.
MUTE
Press to temporarily cut off
the sound. (See Page 15)
Press to stop the action during
a particular scene. Press again to
resume normal video.
(See Page 31)
TV/VIDEO
5
MENU
10
Displays the main on-screen menu.
Press to display all of the available
video sources.
JOYSTICK
Use to select on-screen menu
items and change menu values.
(The remote control will only
function with VCR or DVD units
that are compatible with the LCD TV.)
English-4
victoryia 01-14
6/29/03 3:51 AM
Page 5
Y O U R N E W TV
Convenient Buttons
You can use the remote control up to a distance of about 23 feet from the TV.
When using the remote, always point it directly at the TV.
+100
PRE-CH
Press to select channels over 100.
For example, to select channel 121,
press “+100”, then press “2” and “1”.
(See Page 19)
Tunes to the previous channel.
(See Page 15)
5
1
Info Display
Sleep Timer
Press to select a time for the TV to
turn off automatically.
(See Page 41)
Use to see information on the
current broadcast. (See Page 16)
2
6
PIP
Press to exit the menu.
See the PIP screen section of this
manual. (See Page 29)
7
CAPTION (See Page 42)
S.MODE
MTS
(Multi channel Television Stereo)
AUTO PROG.
Use to store the broadcast/cable
channels that you receive.
(See Page 19)
Press to set caption on/off.
Adjust the TV sound by selecting
one of the preset factory settings
(or select your personal, customized
sound settings). (See Page 24)
EXIT
ADD/DEL
3
Use to store and delete channels
to/from memory. (See Page 20)
4
RESET
8
Press to choose stereo, mono or
Separate Audio Program
(SAP broadcast). (See Page 35)
9
PIP controls (See Page 29)
LOCATE
Press to move the PIP window to
any of the four corners of the
TV screen.
SIZE
Press to make the PIP window
double, large or small.
TV/VIDEO
Press to select one of the available
signal sources for the PIP window.
SWAP
Exchanges the video signal that is
currently displayed on the main
screen with the signal in the PIP
window.
CH
Displays the available channels
in sequence.
(These buttons change channels
in the PIP window only.)
English-5
When your remote does not work,
change the batteries and press the
RESET button for 2-3 seconds
before use.
victoryia 01-14
6/27/03 5:43 AM
Page 6
Y O U R N E W TV
Installing Batteries in the Remote Control
1
Slide the cover out
completely.
Make sure to match the “+” and
2
“–” ends of the batteries with the
diagram inside the compartment.
Install two AAA size
batteries.
Remove the batteries and store them
in a cool, dry place if you won’t be
using the remote control for a long
time.
3
Replace the cover.
The remote control can be used
up to about 23 feet from the TV.
(Assuming typical TV usage,
the batteries last for about one year.)
The remote control doesn’t work!
Check the following:
1. Is the TV power switch on?
2. Are the plus and minus ends of the batteries reversed?
3. Did the battery run out?
4. Is the power out, or is the power cord unplugged?
5. Is there a special fluorescent light or a neon sign nearby?
English-6
victoryia 01-14
6/27/03 2:04 AM
Page 7
C h a p t e r Tw o
I N S TA L L AT I O N
Connecting VHF and UHF Antennas
If your antenna has a set of leads that
look like this, see “Antennas with
300-ohm Flat Twin Leads”, below.
If your antenna has one lead that looks
like this, see “Antennas with 75-ohm
Round Leads”, on page 8.
If you have two antennas, see “Separate
VHF and UHF Antennas”, on page 8.
Antennas with 300-ohm Flat Twin Leads
If you are using an off-air antenna (such as a roof antenna or “rabbit ears”) that has
300-ohm twin flat leads, follow the directions below.
1
Place the wires from
the twin leads under
the screws on a 30075 ohm adaptor (not
supplied). Use a
screwdriver to tighten
the screws.
2
Plug the adaptor into
the TV ANTENNA
terminal on the
bottom of the back
panel.
English-7
victoryia 01-14
6/27/03 2:04 AM
Page 8
I N S TA L L AT I O N
Antennas with 75-ohm Round Leads
1
Plug the antenna
lead into the TV
ANTENNA terminal
on the bottom of the
back panel.
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must
combine the two antenna signals before connecting the antennas to the TV. This
procedure requires a an optional combiner-adaptor (available at most electronics shops).
1
Connect both antenna
leads to the combiner.
2
Plug the combiner
into the TV
ANTENNA terminal
on the bottom of
the rear panel.
Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
Cable without a Cable Box
Because this TV is cable-ready,
you do not need a cable box to
view unscrambled cable channels.
1
Plug the incoming
cable into the TV
ANTENNA terminal
on back of the TV.
English-8
victoryia 01-14
6/27/03 2:04 AM
Page 9
I N S TA L L AT I O N
Connecting to a Cable Box that Descrambles All Channels
This terminal might be labeled
“ANT OUT”, “VHF OUT”, or
simply, “OUT”.
1
Find the cable that is
connected to the
ANTENNA OUT
terminal on your cable
box.
2
Connect the other end
of this cable to the TV
ANTENNA terminal on
the back of the TV.
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths
of coaxial cable. (These items are available at most electronics stores.)
This terminal might be labeled
“ANT IN”, “VHF IN”, or simply,
“IN”.
1
Find and disconnect
the cable that is
connected to the
ANTENNA IN terminal
on your cable box.
2
Connect this cable
to a two-way splitter.
3
Connect a coaxial
cable between an
OUTPUT terminal on
the splitter and the IN
terminal on the cable
box.
English-9
victoryia 01-14
6/27/03 2:04 AM
Page 10
I N S TA L L AT I O N
4
Connect a coaxial
cable between the
ANTENNA OUT
terminal on the
cable box and the
B–IN terminal on the
A/B switch.
5
Connect another
cable between the
other OUT terminal
on the splitter and
the A–IN terminal on
the RF (A/B) switch.
6
Connect the last
coaxial cable
between the OUT
terminal on the RF
(A/B) switch and the
VHF/UHF terminal
on the rear of the
TV.
After you’ve made this connection, set the A/B switch to the “A” position for normal
viewing. Set the A/B switch to the “B” position to view scrambled channels.
(When you set the A/B switch to “B,” you will need to tune your TV to the cable box’s
output channel, which is usually channel 3 or 4.)
English-10
victoryia 01-14
6/27/03 2:04 AM
Page 11
I N S TA L L AT I O N
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a
cable TV system (according to the instructions on pages 7-9).
Skip step 1 if you have not yet connected to an antenna or a cable system.
1
Unplug the cable or
antenna from the
back of the TV.
2
Connect the cable or
antenna to the
ANTENNA IN terminal
on the back of the
VCR.
3
Connect a coaxial
cable between the
ANTENNA OUT
terminal on the VCR
and the antenna
terminal on the TV.
A coaxial cable is usually included with a VCR. (If not, check your local electronics store).
4
Connect a set of
audio cables
between the AUDIO
OUT jacks on the
VCR and the AUDIO
jacks on the TV.
If you have a “mono” (non-stereo) VCR, use the Y-connector (not supplied) to hook up
to the left and right audio input jacks of the TV. If your VCR is stereo, you must connect two cables.
5
Connect a video
cable between the
VIDEO OUT jack on
the VCR and the
VIDEO jack on the
TV.
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.
# Each external input source device has a different back panel configuration.
English-11
victoryia 01-14
6/27/03 2:04 AM
Page 12
I N S TA L L AT I O N
Connecting an S-VHS VCR
Your Samsung TV can be connected to an S-Video signal from an S-VHS VCR.
(This connection delivers a better picture as compared to a standard VHS VCR.)
1
To begin, follow
steps 1–3 in the
previous section to
connect the antenna
or cable to your
VCR and your TV.
2
Connect a set of audio
cables between the
AUDIO OUT jacks on
the VCR and the
AUDIO INPUT jacks
on the TV.
3
Connect an S-video
cable between the
S-VIDEO OUT jack on
the VCR and the
S-VIDEO INPUT jack
on the TV.
An S-video cable is usually included with an S-VHS VCR.
(If not, check your local electronics store.)
# Each external input source device has a different back panel configuration.
English-12
victoryia 01-14
6/27/03 2:04 AM
Page 13
I N S TA L L AT I O N
Connecting a DVD Player
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
1
Connect a set of audio
cables between the
L, R AUDIO INPUT
jacks on the TV and
the AUDIO OUT jacks
on the DVD player.
2
Connect a video cable
between the
COMPONENT1
(Y, Pb, Pr) jacks on
the TV and the Y, Pb,
Pr jacks on the DVD
player.
Note: For an explanation of Component video, see your DVD player owner's manual.
# Each external input source device has a different back panel configuration.
English-13
victoryia 01-14
6/27/03 2:04 AM
Page 14
I N S TA L L AT I O N
Connecting a PC
Note: This figure shows the Standard Connector-jack panel. The actual configuration
on your TV may be different, depending on the model.
TV rear panel
PC rear
PC VIDEO INPUT (15-pin D-SUB)
PC SOUND INPUT (Optional)
• PC AUDIO INPUT
Connect these to the audio-output jacks on your PC.
• PC VIDEO INPUT
Connect to the video output port on your PC.
# Each external input source device has a different back panel configuration.
English-14
victoryia 15-16
6/29/03 3:27 AM
Page 15
Chapter Three
S P E C I A L F E AT U R E S
Turning the TV On and Off
Press the POWER button.
You can also use the Power button on the top panel.
Changing Channels
Using the Channel Buttons
1
Press the CH
/
buttons to change channels.
When you press the CH /
buttons, the TV changes channels in sequence.
You will see all the channels that the TV has memorized. (The TV must have
memorized at least three channels.) You will not see channels that were either
erased or not memorized.
Using the PRE-CH Button to select the Previous Channel
1
Press the PRE-CH button.
The TV will switch to the last channel viewed.
To quickly switch between two channels that are far apart, tune to one channel,
then use the number button to select the second channel. Then, use the PRE-CH
button to quickly alternate between them.
Adjusting the Volume
1
Press the VOL +/– buttons to increase or decrease the volume.
Using Mute
At any time, you can temporarily cut off the sound using the Mute button.
1
Press MUTE and the sound cuts off.
The word “
” will appear in the lower-left corner of the screen.
2
To turn mute off, press the MUTE button again, or simply
press the VOL +/- buttons.
English-15
victoryia 15-16
6/29/03 3:28 AM
Page 16
S P E C I A L F E AT U R E S
Viewing the Display
The display identifies the current channel and the status of certain
audio-video settings.
The on-screen displays
disappear after about ten seconds.
Press the button once more or
wait approximately 10 seconds
and it disappears automatically.
Allows the user to adjust the
settings according to his/her
preference and shows the
current settings.
1
Press the INFO button
on the remote control.
The TV will display the
channel, the type of
sound, and the status
of certain picture and
sound settings.
Viewing the Menus
The on-screen menus
disappear from the screen after
about thirty seconds.
1
With the power on,
press the MENU button.
The main menu appears
on the screen. It’s left
side has five icons:
Input, Picture, Sound,
Channel and Setup.
You can also use the
2
Use the UP/DOWN
buttons to select one of the
5 icons. Then press ENTER(
) to access the
icon’s sub-menu.
3
Press the MENU button to exit.
English-16
TV/Video(
) buttons
on the control panel of the TV
to make selections.
victoryia 17-47
6/27/03 2:05 AM
Page 17
Chapter Four
O P E R AT I O N
Plug & Play Feature
When the TV is initially powered On, two basic customer settings proceed
automatically and subsequently: Setting Auto program, Clock.
1
Press the POWER
button on the remote
control.
The message “Plug &
Play” is displayed.
2
Press the
UP/DOWN
buttons
to select “English”, then
press the ENTER
button.
Press the
UP/DOWN
buttons
to select “Air”, then
press the ENTER
button.
3
Press the ENTER
Button. The TV will
begin memorizing all of
the available channels.
Press the ENTER
button to stop.
4
Press the
LEFT/RIGHT
buttons to move to the
hour or minute.
Set the hour or minute
by pressing the
UP/DOWN
buttons.
(refer to “Setting the
Clock” on page 38.)
5
The message
“Enjoy your watching.”
is displayed.
English-17
victoryia 17-47
6/27/03 2:05 AM
Page 18
O P E R AT I O N
Memorizing the Channels
Your TV can memorize and store all of the available channels for both “off-air” (antenna)
and cable channels. After the available channels are memorized, use the CH and CH
buttons to scan through the channels. This eliminates the need to change channels by
entering the channel digits. There are three steps for memorizing channels: selecting a
broadcast source, memorizing the channels (automatic) and adding and deleting channels
(manual).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you must specify the
type of signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Press the MENU button
to display the menu.
Press the
UP/DOWN
buttons
to select “Channel”, then
press the ENTER
button.
2
Repeatedly press the
ENTER
button to
cycle through these
choices:
Air (antenna), STD,
HRC or IRC (all cable
TV).
Press the
UP/DOWN
buttons to select the
Video signal source,
then press the
ENTER
button.
Note : STD, HRC and IRC identify various types of cable
TV systems. Contact your local cable company to identify
the type of cable system that exists in your particular area.
At this point the signal source has been selected.
Proceed to “Storing Channels in Memory” (next page).
English-18
victoryia 17-47
6/27/03 5:44 AM
Page 19
O P E R AT I O N
Storing Channels in Memory (Automatic Method)
1
First, select the correct
signal source (Air, STD,
HRC, IRC). See steps
1~2 on previous page.
Press the MENU button.
Press the
UP/DOWN
buttons
to select “Channel”, then
press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select “Auto program”.
Press the ENTER
button.
The TV automatically cycles
through all of the available
channels and stores them in
memory. This takes about one to
two minutes.
Press ENTER at any time to
interrupt the memorization process
and return to the CHANNEL menu.
3
Press the ENTER
button.
The TV will begin
memorizing all of the
available channels.
4
After all the available
channels are stored,
the Auto program menu
reappears.
Press the MENU button
to exit.
To check the channels stored in memory
Press the CH
/
button.
Only the channels stored in memory are selected.
To select channels over 100,
Ex) Press
to select channel 108.
English-19
victoryia 17-47
6/27/03 8:13 AM
Page 20
O P E R AT I O N
ADD and DEL Channels (Manual Method)
1
Use the number buttons to directly
select the channel to Add or Delete.
Press the MENU button to display
the menu.
Press the UP/DOWN
buttons to select “Channel”,
then press the ENTER
button.
Press the UP/DOWN
buttons to select “Add/Delete”.
Press the ENTER
button.
Press the LEFT/RIGHT
buttons to select “Add" or "Delete”.
Press the ENTER
button.
Press the EXIT button.
2(Alternate method)
Press the ADD/DEL button.
Repeatedly pressing ENTER
will alternate between “Add”and“Delete”.
Press the LEFT/RIGHT
buttons to select Exit, then press ENTER
to exit.
You can view any channel (including an erased channel) by using the number
buttons on the remote control.
To Select TV/Input
Use to select TV or other external input sources connected to the TV.
Use to select the screen of your choice.
1
Press the MENU button
to display the on-screen
menu.
Press the ENTER
button.
2
Press the ENTER
button to select “TV”,
then press the
ENTER
button.
3
Press the
UP/DOWN
buttons to select the
Input source, then
press ENTER
.
English-20
victoryia 17-47
6/27/03 2:05 AM
Page 21
O P E R AT I O N
To Edit the Input Source Name
Name the input device connected to the input jacks to make your input source selection easier.
1
Press the
UP/DOWN
buttons
to select “Edit Name”,
then press the
ENTER
button.
2
Press the
UP/DOWN
buttons
to select
“AV”, “S-Video”,
“Component1”,
“Component2” or “PC”
then press the
ENTER
button.
3
Press the
UP/DOWN
buttons
repeatedly until the
correct VCR appears.
After the VCR is
entered, press the
ENTER
button.
English-21
victoryia 17-47
6/27/03 2:05 AM
Page 22
O P E R AT I O N
Using Automatic Picture Settings
Your TV has four automatic picture settings (“Custom”, “Dynamic”, “Standard”,
and “Movie”) that are preset at the factory. You can activate either Dynamic, Standard,
or Movie by pressing P.MODE (or by making a selection from the menu). Or, you can
select “Custom” which automatically recalls your personalized picture settings.
1
Press the MENU button
to display the menu.
Press the
UP/DOWN
buttons
to select “Picture”, then
press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select the
“Dynamic”, “Standard”,
“Movie” or “Custom”
picture setting.
Press ENTER
.
Press MENU twice
to exit.
Alternate method:
Simply press the P.MODE button on the remote
control to select one of the standard picture settings.
•
•
•
•
Choose Dynamic to increase the clarity and sharpness of the picture.
Choose Standard for the standard factory settings.
Choose Movie when viewing the Movie.
Choose Custom if you want to adjust the settings according to personal
preference (see “Customizing the Picture, page 23).
English-22
victoryia 17-47
6/27/03 2:05 AM
Page 23
O P E R AT I O N
Customizing the Picture
You can use the on-screen menus to change the contrast, brightness, sharpness,
color and tint according to personal preference.
(Alternatively, you can use one of the “automatic” settings. See previous page.)
1
Press the MENU button
to display the menu.
Press the
UP/DOWN
buttons
to select “Picture”, then
press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select “Custom Picture”,
then press the ENTER
button.
3
Press the ENTER
buttons to select a
particular item.
4
Press the
LEFT/RIGHT
buttons to decrease or
increase the value of
a particular item.
For example, if you
select “Contrast”,
pressing ENTER
increases it.
Press the UP/DOWN
buttons to select Contrast,
Brightness, Sharpness,
Color or Tint.
Press the MENU
button to exit.
English-23
victoryia 17-47
6/27/03 2:05 AM
Page 24
O P E R AT I O N
Using Automatic Sound Settings
Your TV has five automatic sound settings (“Custom”, “Standard”, “Music”, “Movie”
and “Speech”) that are preset at the factory. You can activate any of them by pressing the
S.MODE button (or by making a selection from the on-screen menu). Or, you can select
“Custom Sound”, which automatically recalls your personalized sound settings.
1
Press the MENU button
to display the menu.
Press the
UP/DOWN
buttons
to select “Sound”, then
press the ENTER
button.
Press the
UP/DOWN
buttons
to select “Sound Mode”,
than press the
ENTER
button.
2
Press the
UP/DOWN
buttons
repeatedly to select the
“Standard”, “Music”,
“Movie”, “Speech”, or
“Custom” sound settings.
Press MENU to exit.
Alternate method:
Simply press the the S.MODE button on the remote
control to select one of the standard sound settings.
•
•
•
•
•
Choose Standard for the standard factory settings.
Choose Music when watching music videos or concerts.
Choose Movie when watching movies.
Choose Speech when watching a show that is mostly dialogue (i.e., news).
Choose Custom to recall your personalized settings.
English-24
victoryia 17-47
6/27/03 2:05 AM
Page 25
O P E R AT I O N
Customizing the Sound
The sound settings can be adjusted to suit your personal preference.
(Alternatively, you can use one of the “automatic” settings. See previous page.)
1
Press the MENU button
to display the menu.
Press the
UP/DOWN
buttons
to select “Sound”, then
press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select “Custom Sound”,
then press the ENTER
button.
3
Press the
LEFT/RIGHT
buttons to select a
particular item to be
changed.
Press the
UP/DOWN
buttons
to increase or decrease
the value of a particular
item.
Press the MENU button
to exit.
English-25
victoryia 17-47
6/27/03 2:05 AM
Page 26
O P E R AT I O N
Selecting a Menu Language
1
Press the MENU button
to display the menu.
Press the
UP/DOWN
buttons
to select “Setup”, then
press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select Language.
Press the ENTER
button.
3
Press the
UP/DOWN
buttons
to select Language,
Français, Español,
English or Português.
Press the MENU button
to exit.
English-26
victoryia 17-47
6/27/03 5:44 AM
Page 27
O P E R AT I O N
Setting the Blue Screen Mode
If no signal is being received or the signal is very weak, a blue screen automatically
replaces the noisy picture background.
If you wish to continue viewing the poor picture, you must set the “Blue screen”
mode to “Off”.
1
Press the MENU button
to display the menu.
Press the
UP/DOWN
buttons
to select “Setup”, then
press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select “Blue Screen”,
then press the
ENTER
button.
Pressing the UP/DOWN
buttons will alternate between
“On” and “Off”.
3
Press the
UP/DOWN
buttons
to set Blue Screen
“On” or “Off”.
Press the MENU button
to exit.
English-27
victoryia 17-47
6/27/03 2:05 AM
Page 28
O P E R AT I O N
Fine Tuning Channels
Use fine tuning to manually adjust a particular channel for optimal reception.
1
Select the appropriate
channel.
2
Press the MENU button
to display the menu.
Press the
UP/DOWN
buttons
to select “Channel”, then
press the ENTER
button.
3
Press the
UP/DOWN
buttons
to select “Fine Tune”,
then press the ENTER
button.
If you do not store the channel in
memory, adjustments to the
settings are applied before you
change the channel but are not
saved. Therefore they return to the
original settings once you move to
another channel. User-adjusted
channels are marked with an
asterisk “ * ” on the right-hand side
of the channel number in the
channel banner.
4
Press the RIGHT
and LEFT buttons
to adjust the fine tuning.
5
To store the fine tuning
setting in the TV’s
memory, press the
ENTER
button.
To reset the fine tuning,
press the UP/DOWN
buttons to select
“Reset”, then press the
ENTER
button.
Press the MENU button
to exit.
English-28
victoryia 17-47
6/27/03 2:05 AM
Page 29
O P E R AT I O N
Viewing Picture-in-Picture
This product has one tuner built-in, which does not allow PIP to function in
the same mode. Please see ‘PIP Settings’ below for details.
You can use the PIP feature to simultaneously watch two video sources.
Note: While V-Chip is in operation, the PIP function cannot be used.
Activating Picture-in-Picture
Quick way to access the PIP menu:
Simply press the PIP button on the
remote control.
1
Press the MENU button
to display the menu.
Press the
UP/DOWN
buttons
to select “Picture”, then
press the ENTER
button. Press the
UP/DOWN
buttons
to select “PIP”.
If you turn the TV off while watching
and turn it on again, the PIP window
will disappear.
2
Press the ENTER
button to select PIP
“Off”.
3
Press the MENU button to exit.
Note: Picture-in-Picture does not function when the
V-chip is active.
O : PIP operates
X : PIP doesn’t operate
PIP Settings
Sub Picture
TV
AV
S-Video
TV
X
X
X
O
O
O
Main Picture
Component 1 Component 2
PC
AV
X
X
X
O
O
O
S-Video
X
X
X
O
O
O
Component 1
O
O
O
X
X
X
Component 2
O
O
O
X
X
X
PC
O
O
O
X
X
X
English-29
victoryia 17-47
6/27/03 2:05 AM
Page 30
O P E R AT I O N
Selecting a Signal Source (External A/V) for PIP
Press the TV/VIDEO(PIP) button repeatedly to cycle
through all of the available signal sources:
“TV”, “AV”, “S-Video”, “Component 1”, “Component 2”
and “PC”.
If you select “TV”,
the PIP image is the same as
the main image.
can change the PIP Screen according to the Main Source.
* You
(See the PIP Settings on page 29.)
Swapping the Contents of the PIP and Main image
When you press the SWAP button,
the image in the PIP window will appear on the
main screen, and vice versa.
Changing the PIP Channel
Press the PIP CH / button to change the channel
that appears in the PIP window.
Changing the Location of the PIP Window
When you press the LOCATE button repeatedly,
the PIP window moves from corner to corner on the
TV screen.
Changing the Size of the PIP Window
Press the SIZE button to alternate between a
smaller and larger PIP window.
• When the PC is in energy saving mode, you cannot choose the
PIP option.
• Press the
button once more to deselect PIP mode.
• You may notice that the picture in the PIP window becomes slightly
unnatural when you set the main screen to game or karaoke mode.
Switch the main screen and the PIP window for normal viewing.
• You can adjust picture position only by using the
size menu.
English-30
victoryia 17-47
6/27/03 5:45 AM
Page 31
O P E R AT I O N
Changing the Screen Size
1
Press the ASPECT button to change the screen size.
•
•
•
•
Wide: Sets the picture to 16:9 wide mode.
Panorama : Use this mode for the wide aspect ratio of a panoramic picture.
Zoom 1,2 : Magnifies the size of the picture on screen.
Normal: Sets the picture to 4:3 normal mode.
This is the standard TV screen size.
Freezing the Picture
1
Press the STILL button to freeze a moving picture.
• Normal sound will still be heard.
Press again to cancel.
English-31
victoryia 17-47
6/27/03 5:45 AM
Page 32
O P E R AT I O N
Adjusting the Color Tone
You can change the color of the entire screen according to your preference.
1
Press the MENU button
to display the menu.
Press the
UP/DOWN
buttons
to select “Picture”, then
press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select “Color Tone”,
then press the
ENTER
button.
You can select
“Cool 2”, “Cool 1”, “Standard”,
“Warm 1”, “Warm 2” color tones
according to personal preference.
3
Press the
UP/DOWN
buttons
to select Color Tone.
Press the MENU button
to exit.
English-32
victoryia 17-47
6/27/03 2:05 AM
Page 33
O P E R AT I O N
For automatic volume control
Reduces the differences in volume level among broadcasters.
1
Press the MENU button
to display the menu.
Press the
UP/DOWN
buttons
to select “Sound”, then
press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select “Auto Volume”,
then press the
ENTER
button.
3
Press the
UP/DOWN
buttons
to set Auto Volume
“On”.
Press the MENU button
to exit.
English-33
victoryia 17-47
6/27/03 2:05 AM
Page 34
O P E R AT I O N
To select the WOW option
Emphasizes mid- and low-range sounds or gives you a surround-sound experience.
1
Press the MENU button
to display the menu.
Press the
UP/DOWN
buttons
to select “Sound”, then
press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select “WOW”, then
press the ENTER
button.
3
Press the
UP/DOWN
buttons
to set WOW “On”.
Press the MENU button
to exit.
TRADEMARK & LABEL LICENSE NOTICE
is a trademark of SRS Labs, Inc.
WOW technology is incorporated under license from SRS labs, Inc.
Or
WOW, SRS and
symbol are trademarks of SRS Labs, Inc.
WOW technology is incorporated under license from SRS labs, Inc.
English-34
victoryia 17-47
6/27/03 7:05 AM
Page 35
O P E R AT I O N
Special Sound Options
Choosing a Multi-Channel Sound (MTS) Soundtrack
Depending on the particular program being broadcast, you can listen to stereo,
mono, or a Separate Audio Program. (SAP audio is usually a foreign-language
translation. Sometimes SAP has unrelated information like news or weather.)
1
Press the MENU button
to display the menu.
Press the
UP/DOWN
buttons
to select “Sound”, then
press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select “MTS”, then
press the ENTER
button.
Note : The text at the bottom
of the menu tells you
if the incoming audio
is Mono, Stereo or SAP.
3
Press the
UP/DOWN
buttons
to select “Mono”, “Stereo”
or “SAP”, then press the
ENTER
button.
•
•
•
Choose Stereo for channels that are broadcasting in stereo.
Choose Mono for channels that are broadcasting in mono, or if you are having
difficulty receiving a stereo signal.
Choose SAP to listen to the Separate Audio Program, which is usually a
foreign-language translation.
You can also change the MTS setting by pressing the “MTS” button on the remote
control. (When you change channels, MTS is set to “Stereo” automatically.
To listen in ‘SAP’ or ‘Mono,’ change the MTS setting.)
English-35
victoryia 17-47
6/27/03 2:05 AM
Page 36
O P E R AT I O N
Selecting the Main or Sub Sound
You can select either Main or Sub when PIP is On.
1
Press the MENU button
to display the menu.
Press the
UP/DOWN
buttons
to select “Sound”, then
press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select “Sound Select”,
then press the
ENTER
button.
Note : Sound Select can also
be used to select the
Main or Sub sound
over the speakers.
3
Press the ENTER
button to select
“Main” or “Sub”.
Select “Main” to hear
the main TV sound and
select “Sub” to hear the
PIP window sound.
Press the MENU button
to exit.
English-36
victoryia 17-47
6/27/03 2:05 AM
Page 37
O P E R AT I O N
Adjusting the Headphone Sound
The headphone option is especially useful when simultaneously watching the main
screen and the PIP window.
Note : Headphones must be
purchased separately.
1
Press the MENU button
to display the menu.
Press the
UP/DOWN
buttons
to select “Sound”, then
press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select “Headphone”
and press the ENTER
button.
3
Press the
UP/DOWN
buttons,
then press the ENTER
button to select the
particular item to be
changed.
4
Press the
LEFT/RIGHT
buttons to decrease or
increase the value of
a particular item.
English-37
victoryia 17-47
6/27/03 5:45 AM
Page 38
O P E R AT I O N
Setting the Clock
Setting the clock is necessary in order to use the various timer features of the TV.
Also, you can check the time while watching the TV. (Just press the INFO button.)
1
Press the MENU button
to display the on-screen
menu.
Press the
UP/DOWN
buttons
to select “Setup”, then
press the ENTER
button.
2
Press the ENTER
button to select
“Time” and press the
ENTER
button to
select “Clock”.
Note : You can also set the time
using the numeric buttons
on the remote.
3
Press the
UP/DOWN
buttons
repeatedly until the
correct hour appears.
Press the
LEFT/RIGHT
buttons
to select “Minute”.
Press the
UP/DOWN
buttons
until the correct minute
appears.
Press the
LEFT/RIGHT
buttons
to select am/pm and
adjust with the
UP/DOWN
buttons.
Press the MENU button
to Exit.
English-38
victoryia 17-47
6/30/03 9:51 PM
Page 39
O P E R AT I O N
Setting the On/Off Timer
Before using the timer, you must
set the TV’s clock.
(See “Setting the Clock” on page 38)
1
Press the MENU button
to display the on-screen
menu.
Press the
UP/DOWN
buttons to select
“Setup”, then press the
ENTER
button twice.
When you set the hours, make sure
the correct time of day (am or pm)
appears to the right of the time.
2
Press the
UP/DOWN
buttons to select
“On Time” or “Off Time”,
then press the
ENTER
button.
3
Press the
UP/DOWN
buttons repeatedly to
select the appropriate
hour.
Press the
LEFT/RIGHT
buttons repeatedly to
select the appropriate
minute (i.e., the time
when the TV will turn on).
English-39
victoryia 17-47
6/27/03 5:46 AM
Page 40
O P E R AT I O N
To deactivate the “On time,”
select “Off” during this step.
4
Press the
LEFT/RIGHT
buttons to select Setup.
Press the
UP/DOWN
buttons
to on-timer “On”.
(Repeatedly pressing
the UP/DOWN
buttons will alternate
between On and Off.)
When finished, press the
ENTER
button.
5
To set the Off time,
press the UP/DOWN
buttons to select
“Off time”.
Press the ENTER
button and set the hours
and minutes. (Follow the
same procedure as in
steps 1~4 above.)
6
When finished setting the timer, press the MENU
button to exit.
•
Auto Power Off
When you set the timer on, your television will be turned
off if you do not operate any controls for 3 hours after
the TV has been turned on with the 'Timer On' function.
'Auto power off' operates only when the TV has been
turned on by the 'Timer on' function.
English-40
victoryia 17-47
6/28/03 2:52 AM
Page 41
O P E R AT I O N
Setting the Sleep Timer
Set the timer for the TV to turn off at the preset time automatically.
Setting the On/Off Timer Using the Menu
1
Press the MENU button
to display the on-screen
menu.
Press the
UP/DOWN
buttons
to select “Setup”, then
press the ENTER
button.
Press the ENTER
button to select “Time”.
2
Press the
UP/DOWN
buttons
to select “Sleep Timer”,
then press the
ENTER
button.
3
Press the
UP/DOWN
buttons
repeatedly until the
correct time appears.
•
Easy Way to Set the Sleep Timer
Press the
button on the remote.
The number on the screen changes from
Off • 30 • 60 • 90 • 120 • 150 • 180 • Off
English-41
victoryia 17-47
6/27/03 2:05 AM
Page 42
O P E R AT I O N
Viewing Closed Captions
Your TV decodes and displays the closed captions that are broadcast with certain TV shows.
These captions are usually subtitles for the hearing impaired or foreign-language translations.
All VCRs record the closed caption signal from television programs, so home-recorded
video tapes also provide closed captions. Most pre-recorded commercial video tapes provide
closed captions as well. Check for the closed caption symbol in your television schedule and
on the tape’s packaging:
.
1
Press the MENU button
to display the on-screen
menu.
Press the
UP/DOWN
buttons
to select “Setup”, then
press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select “Caption”, then
press the ENTER
button.
▼
Misspellings and unusual
3characters sometimes occur during
closed
Press
thecaption
ENTERtransmissions, especially
those to
ofselect
live events.
button
“Off”. There may be a
small delay before captions appear
when you change channels. These are
not malfunctions of the TV.
In caption mode, captions
appear
4 at the bottom of the screen,
and
theythe
usually cover only a small
Press
portion
of the picture.
UP/DOWN
buttons
to set caption “On/Off”,
Inthen
textpress
mode,
the information unrelated
toENTER
the program,
such as news or
button.
weather, is displayed. Text often
covers
large
portion of the screen.
Pressathe
MENU
button to exit.
5
Depending on the particular broadcast, it might be necessary
to make changes to “Channel” and “Filed”:
Press the MENU button to exit the menu.
English-42
➛ Different channels and fields
display different information:
Field 2 carries additional
information that supplements the
information in Field 1.
(For example, Channel 1 may
have subtitles in English, while
Channel 2 has subtitles in Spanish.)
victoryia 17-47
6/27/03 2:05 AM
Page 43
O P E R AT I O N
Using the V-Chip
The V-Chip feature automatically locks out programming that is deemed inappropriate for
children. The user must first enter a Pin (personal ID number) before any of the V-Chip
restrictions can be set up or changed.
Setting Up Your Personal ID Number (PIN)
1
Press the MENU button
to display the menu.
Press the
UP/DOWN
buttons
to select “Setup”, then
press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select “V-Chip”, then
press the ENTER
button.
3
The “Enter Pin” screen
will appear. Enter your
4-digit Pin number.
Note: The default Pin
number for a new TV
set is “0-0-0-0.”
4
After entering a valid
PIN number, the
“V-Chip” screen will
appear. Press the
UP/DOWN
buttons
to select “Change Pin.”
5
➜
Press the ENTER
button.
The Change pin screen
will appear. Choose any
4-digits for your Pin and
enter them.
As soon as the 4 digits are entered, the “Confirm new
Pin” screen appears. Re-enter the same 4 digits.
When the Confirm screen disappears, your Pin has
been memorized. Press the MENU button to exit.
English-43
Note: If you forget the Pin,
press the remote-control
buttons in the following
sequence,which resets the pin
to 0-0-0-0:
POWER OFF ➔ MUTE ➔
8 ➔ 2 ➔ 4 ➔ POWER ON.
victoryia 17-47
6/27/03 2:05 AM
Page 44
O P E R AT I O N
How to Enable/Disable the V-Chip
Note: V-Chip cannot be used during PIP operation.
1
Press the MENU button
to display the menu.
Press the
UP/DOWN
buttons
to select “Setup”, then
press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select “V-Chip”, then
press the ENTER
button.
3
The “Enter Pin” screen
will appear. Enter your
4-digit Pin number.
4
The “V-Chip” screen will
appear, and “V-Chip Lock”
will be select.
To enable the V-Chip
feature, press the
ENTER
button so that
the “V-Chip Lock” is set
to Yes. (Pressing the UP/DOWN
will alternate between On and Off.)
buttons
How to Set up Restrictions Using the ‘TV guidelines’
First, set up a personal identification number (PIN), and enable the V-Chip.
(See previous section.) Parental restrictions can be set up using either of two methods:
The TV guidelines or the MPAA rating.
1
Press the MENU button
to display the menu.
Press the
UP/DOWN
buttons
to select “Setup”, then
press the ENTER
button.
English-44
victoryia 17-47
6/27/03 5:47 AM
Page 45
O P E R AT I O N
2
Press the
UP/DOWN
buttons
to select “V-chip”, then
press the ENTER
button.
The “Enter pin” screen
will appear. Enter your
4-digit PIN number.
3
Press the
UP/DOWN
buttons
to select “TV Guidelines”,
then press the ENTER
button.
Note: These categories consist of
two separate groups : TV-Y and
TV-Y7 (young children through
age 7), and TV-G through TV-MA
(everybody else).
The restrictions for these two
groups work independently:
If a household includes very young
children as well as young adults,
the TV guidelines must be set up
separately for each age group.
(See next step.)
4
The “TV guidelines”
screen will appear.
Press the the UP/DOWN
buttons to select
one of the six age-based
categories:
TV-Y
Young children
TV-Y7 Children 7 and over
-------------------------------------TV-G
General audience
TV-PG Parental guidance
TV-14 Viewers 14 and over
TV-MA Mature audience
5
At this point, one of the TV-Ratings is selected.
Press the ENTER( )button: Depending on your existing setup, the color of the letter “U” or “B”
will be highlighted. (U= Unblocked, B= Blocked)
When the color of the “U” or “B” is highlighted, press the ENTER(
)button to block or unblock the category.
A TV-Rating will be highlighted.
To exit this screen, press the MENU again. To select a different TV-Rating, press the UP/DOWN
buttons and then repeat the process.
Note 1: The TV-Y7, TV-PG, TV-14 and TV-MA have additional options.
See the next step to change any of the following sub-ratings:
FV: Fantasy Violence
D: Sexual suggestive Dialog
L: Adult Language
S: Sexual situation
V: Violence
Note 2: The V-Chip will automatically block certain categories that are “more restrictive.” For example,
if you block “TV-Y” category, then TV-Y7 will automatically be blocked. Similarly, if you block
the TV-G category, then all the categories in the “young adult” group will be blocked
(TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (D, L, S, V) work together similarly.
(See next section.)
English-45
victoryia 17-47
6/27/03 5:50 AM
Page 46
O P E R AT I O N
6
How to set the FV, D, L, S and V sub-ratings.
First, highlight one of these TV-Ratings: TV-Y7, TV-PG, TV-14 or TV-MA
(See Step 4, on previous page).
Next, while the TV-Rating is selected, repeatedly press the ENTER( )button.
This will cycle through the available sub-ratings (FV,L, S, D or V).
A highlighted letter (“U” or “B”) will be displayed for each sub-rating. While the “U” or “B” is
highlighted, press the ENTER( )buttons to change the sub-rating.
Press MENU once to save the TV guidelines. A TV-Rating will be selected, and no letters
“U” or “B” will be changed to yellow.
To exit this screen, press the MENU button again. To select a different TV-Rating, press the
UP/DOWN
buttons and then repeat the process.
Note: The V-chip will automatically block certain categories that are “More restrictive”.
For example, if you block “L” sub-rating in TV-PG, then the “L” sub-ratings in TV-14 and
TV-MA will automatically be blocked.
7
Press the MENU button three times to clear all the screens.
(Or proceed to the next section, and set up additional restrictions based on the MPAA codes).
How to Set up Restrictions using the MPAA Ratings: G, PG,
PG-13, R, NC-17, X
The MPAA rating system uses the Motion Picture Association of America (MPAA) system,
and its main application is for movies. (Eventually, movie videocassettes will be encoded
with MPAA ratings.) When the V-Chip lock is on, the TV will automatically block any
programs that are coded with objectionable ratings (either MPAA or TV-Ratings).
1
Press the MENU button
to display the menu.
Press the
UP/DOWN
buttons
to select “Setup”, then
press the ENTER
button.
Press the
UP/DOWN
buttons
to select “V-Chip”, then
press the ENTER
button.
2
The “Enter pin” screen
will appear. Enter your
4-digit Pin number.
English-46
victoryia 17-47
6/27/03 2:05 AM
Page 47
O P E R AT I O N
3
Press the
UP/DOWN
buttons
to select “MPAA Rating”,
then press the
ENTER
button.
4
Repeatedly press the
UP/DOWN
buttons
to select a particular
MPAA category. (When
a category is selected,
its color changes to
yellow.) Pressing the
UP/DOWN
buttons
will cycle through the
MPAA categories:
G
General audience (no restrictions).
PG
Parental guidance suggested.
PG-13 PG-13 (Parents strongly cautioned).
R
R (Restricted. Children under 17
should be accompanied by an adult).
NC-17 No children under age 17.
X
X (Adults only).
NR
Not rated.
Press the UP/DOWN
buttons to select a category.
Press the ENTER( )buttons to select “U” or “B”.
Press the MENU button three times to save the settings and to clear all screens.
Note: The V-Chip will automatically block any category that is “more restrictive”.
For example, if you block the “PG-13” category, then “R,” “NC-17,” and “X”will
automatically be blocked also.
How to Reset the TV after the V-Chip
Blocks a Channel (‘Emergency Escape’)
If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and
the following message will appear: “Excessive rating”.
To resume normal viewing, tune to a different channel using the number buttons. Under certain
conditions (depending on the rating of the local TV programs) the V-Chip might lock out all the
channels.
In this case, use the Menu button for an “emergency escape”:
Select the V-Chip on the Menu. Enter your PIN number, and press the ENTER(
temporarily disable the V-Chip Lock.
English-47
) button to
victoryia 48-51
6/27/03 2:05 AM
Page 48
Chapter Five
PC D I S P L AY
Using Your TV as a Computer (PC) Display
How to Set up Your PC Software (Windows only)
The Windows display-settings for a typical computer are shown below. However, the
actual screens on your PC will probably look different, depending upon your particular
version of Windows and your particular video card. Even if your actual screens look
different, the same, basic set-up information will apply in most cases.
(If not, contact your computer manufacturer or Samsung Dealer.)
First, click on “Settings” on the
Windows start menu.
While “Settings” is highlighted,
move the cursor so that “Control
Panel” is highlighted.
When the control panel screen
appears, click on “Display” and a
display dialog-box will appear.
Navigate to the “settings” tab on
the display dialog-box.
The two key variables that apply
the TV-PC interface are “resolution”
and “colors.” The correct settings
for these two variables are:
* Size (sometimes called
“resolution”): 1280 x 768 pixels
If a vertical-frequency option exists
on your display settings dialog box,
the correct value is “60” or “60 Hz”.
Otherwise, just click “OK” and exit
the dialog box.
* See “Display Modes” on page 59.
English-48
victoryia 48-51
6/27/03 2:05 AM
Page 49
PC D I S P L AY
Adjusting the Screen Quality
The purpose of the picture quality adjustment is to remove or reduce picture noise. If
the noise is not removed by fine tuning alone, then do the frequency adjustments to the
utmost and fine tune again. After the noise has been reduced, re-adjust the picture so
that it is aligned on the center of screen.
Press the PC button on the remote control to select the PC mode.
1
Press the MENU button
to display the menu.
Press the
UP/DOWN
buttons
to select “Setup”, then
press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select “PC Setup”,
then press the
ENTER
button.
3
Press the
ENTER
button to
select “PC Video”.
Press the
UP/DOWN
buttons
to select “Frequency”
or “Phase”.
4
Press the
LEFT/RIGHT
buttons to adjust the
screen quality, vertical
stripes appear or the
picture may be blurry.
<Adjusting Frequency>
<Adjusting Phase>
5
When you are satisfied with the settings, press the
MENU button repeatedly to return to normal viewing.
English-49
victoryia 48-51
6/27/03 2:05 AM
Page 50
PC D I S P L AY
Changing the Screen Position
Press the PC button on the remote control to select the PC mode.
1
Press the MENU button
to display the menu.
Press the
UP/DOWN
buttons
to select “Setup”, then
press the ENTER
button.
2
Press the
UP/DOWN
buttons
to select “PC Setup”,
then press the ENTER
button.
3
Press the
UP/DOWN
buttons
to select “PC Position”,
then press the ENTER
button.
4
Press the
UP/DOWN
buttons
to adjusting the
V-Position.
Press the LEFT/RIGHT
buttons to adjusting
the H-Position.
Press the MENU button
to exit.
English-50
victoryia 48-51
6/27/03 2:05 AM
Page 51
PC D I S P L AY
How to Auto Adjust
Use the Auto Adjust function to have the TV set automatically adjust the video signals
the monitor receives. The function also automatically fine-tunes the settings and
adjusts the frequency values and positions.
1
Press the MENU button
to display the menu.
Press the DOWN
button to select
“Setup”, then press the
ENTER
button.
2
Press the
UP/DOWN
buttons
to select “PC Setup”,
then press the
ENTER
button.
3
Press the
UP/DOWN
buttons
to select “Auto Adjustment”,
then press the
ENTER button.
4
Press the MENU button
to exit.
English-51
victoryia 52-53
6/27/03 2:05 AM
Page 52
Chapter Six
TROUBLESHOOTING
If the TV seems to have a problem, first try this list of possible problems and solutions.
If none of these troubleshooting tips apply, call your nearest Samsung service center.
Identifying Problems
Possible Solution
Try another channel.
Adjust the antenna.
Check all wire connections.
Try another channel.
Poor sound quality.
Adjust the antenna.
Try another channel.
No picture or sound.
Press the TV/VIDEO button.
Make sure the TV is plugged in.
Check the antenna connections.
No sound or sound is too low First, check the volume of units connected to your TV
(digital broadcasting receiver, DTV, DVD, cable
at maximum volume.
broadcasting receiver, VCR, etc.). Then, adjust the TV
volume accordingly.
Check all wire connections.
Picture rolls vertically.
Unplug the TV for 30 seconds, then try operating it
The TV operates erratically.
again.
Make sure the wall outlet is working.
The TV won’t turn on.
Remote control malfunctions Replace the remote control batteries.
Clean the upper edge of the remote control
(transmission window).
Check the battery terminals.
Ensure that the signal cable is firmly connected to the
“Check Signal Cable”
message.
PC sources.
Problem
Poor picture
English-52
victoryia 52-53
6/27/03 2:05 AM
Page 53
TROUBLESHOOTING
Problem
“Not Supported Mode!”
message.
Possible Solution
Check the maximum resolution and the frequency of
the video Adapter.
Compare these values with the data in the Display
Modes Timing Chart.
Adjust the Brightness and Contrast.
Adjust the Fine function.
Adjust the Coarse function and then adjust the Fine
function.
The image is too light or too
dark.
Horizontal bars appear to
flicker, jitter or shimmer on
the image.
Vertical bars appear to flicker, Adjust the Coarse function and then adjust the Fine
jitter or shimmer on the image. function.
On your computer check: Power ,
Screen is black and power
indicator light blinks steadily. Signal Cable(15-pin D-Sub)
The TV is using its power management system.
Move the computer's mouse or press a key on the keyboard.
Image is not stable and may
If the setting is not correct, use your computer utility
appear to vibrate.
program to change the display settings.
NOTE: Your TV supports multiscan display functions
within the following frequency domain:
• Horizontal frequency:
30 kHz ~ 68 kHz
• Vertical frequency:
56 Hz ~ 85 Hz
• Maximum refresh rate:
1280 x 768 @ 60 Hz
Image is not centered on the Adjust the horizontal and vertical position.
screen.
If a still image is displayed for When you need to leave the monitor
an extended period of time,
unused for an extended period of time, adjust
residual images or blurring
the settings so that the monitor automatically
may appear.
goes into energy saving mode or activates the
screen saver to display moving images.
English-53
victoryia 54-59
6/27/03 2:06 AM
Page 54
APPENDIX
How to assemble the TV set and stand base
NOTE : The curved side of the stand base should be placed
at the back of the TV set as shown in the above figure.
English-54
victoryia 54-59
6/27/03 2:06 AM
Page 55
APPENDIX
Installing the Wall Mount Kit (sold separately)
This installation is to be used when attaching the wall mount to a concrete wall.
When attaching to other building materials, please contact your nearest dealer.
1
Connect the hinge to the wall mount bracket.
2
Secure the bracket to the wall.
Use (a) holes to attach the VESA mount.
Use (b) holes to attach the wall mount.
3
4
Remove the base from the TV set.
Holder-Wall : 1EA
Holder-Ass'y : 1EA
Rubber : 4EA
Mount the TV on the wall mount bracket.
Holder-LCD L/R : 2EA
Screw FH 4 x 8 : 10EA
#The wall mount bracket is sold separately.
Screw BH 4 x 25 : 4EA
Anchor : 4EA
English-55
victoryia 54-59
6/27/03 2:06 AM
Page 56
APPENDIX
Using the Anti-Theft Kensington Lock
Cable
Figure 2
Figure 1
<Optional>
The Kensington lock is a device used to physically fix the system when using it in a public place. The locking
device has to be purchased separately. The appearance and locking method may differ from the illustration
depending on the manufacturer. Please refer to the manual provided with the Kensington lock for proper use.
1
Insert the locking device into the Kensington slot on the LCD TV(Figure 1),
and turn it in the locking direction(Figure 2).
2
Connect the Kensington lock cable.
3
Fix the Kensington lock to a desk or a heavy stationary object.
Retractable Stand
Note: The maximum tilt angle is 10 degrees in the backward direction.
Please do not tilt the TV outside the specified range. Using excessive force
to tilt the TV may cause permanent damage to the mechanical part of the stand.
0~10
English-56
victoryia 54-59
6/27/03 2:06 AM
Page 57
APPENDIX
Cleaning and Maintaining Your TV
With proper care, your TV unit will give you many years of service. Please follow these
guidelines to get the maximum performance from your TV.
Placement
•
•
•
•
Do not place the TV near extremely hot, cold, humid or dusty places.
Do not place the TV near appliances with electric motors that create magnetic fields,
such as vacuum cleaners.
Keep the ventilation openings clear; do not place the TV on a soft surface, such as
cloth or paper.
Place the TV in a vertical position only.
Liquids
•
Do not handle liquids near or on the TV.
Liquids that spill into it can cause serious damage.
Cabinet
•
•
•
Never open the cabinet or touch the parts inside.
Wipe your TV with a clean, dry cloth. Never use water, cleaning fluids, wax, or
chemicals.
Do not put heavy objects on top of the cabinet.
Temperature
•
If your TV is suddenly moved from a cold to a warm place, unplug the power cord,
and allow at least two hours for moisture that may have formed inside the unit to dry
completely.
Using Your TV in Another Country
If you plan to take your TV with you to a foreign country, please be aware of the
different television systems that are in use around the world. A TV designed for one
system may not work properly with another system due to differences in the TV channel
frequencies.
English-57
victoryia 54-59
6/27/03 2:06 AM
Page 58
APPENDIX
Specifications
Model Name
LTN1785W
Panel
Size
Display Size
Type
Pixel Pitch
Viewing Angle
17.0 inch Diagonal
370.56(H) X 222.36(V)mm
a-si TFT active matrix
0.2895(H) X 0.2895(V)mm
170/170 (H/V)
*Frequency
Horizontal
Vertical
Display Color
30 ~ 68 kHz
56 ~ 85 Hz
16,777,216 colors
Maximum Mode
1280 X 768 @ 60 Hz
Input Signal
Sync.
Video signal
H/V Separate, TTL, P. or N.
0.7 Vp-p @ 75 ohm
Video
Color system
Video system
NTSC
CVBS, S-VHS, RGB
Component
Video In
Audio In
1.0 Vp-p @ 75 ohm
500mVrms
Power Supply
Input
Output
AC 100 ~ 240 V (50/60Hz),
DC 14V / 4.5A
Power
Consumption
Maximum
Power Saving
70 W
<3W
Dimensions /
Weight
Unit (WxDxH):
body
Display
Resolution
With stand
Environmental
Considerations
Audio
Characteristics
Operating
Temperature
Operating
Humidity
Storage
Temperature
Storage
Humidity
18.26 x 3.45 x 13.60 inch / 9.7 lbs
(463.8 x 87.7 x 345.0 mm / 4.4 kg)
18.26 x 7.05 x 14.32 inch / 10.4 lbs
(463.8 x 179.0 x 363.7 mm / 4.72 kg)
50 °F to 104 °F (10 °C to 40 °C)
10% to 80%
-13 °F to 113 °F (-25 °C to 45 °C)
5% to 95%
Audio Input 1
Audio Input 2
Headphone
out
Frequency
Response
RCA Jack Red(R) White(L), 0.5Vrms (-9dB)
3.5ø Stereo Jack, 0.5Vrms (-9dB)
Max. 10mW Output (3.5ø Stereo Jack 32)
RF: 80Hz ~ 15KHz (at- 3dB)
A/V: 80Hz ~ 20KHz (at - 3dB)
* Referring to Display Modes, page 59.
English-58
victoryia 54-59
6/27/03 2:06 AM
Page 59
APPENDIX
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted
automatically. If the signal from the system doesn’t equal the standard signal mode,
adjust the mode by referring to your Videocard user guide; otherwise there may be no
video. For the display modes listed below, the screen image has been optimized during
manufacture.
Mode
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
Frequency
(MHz)
Sync
Polarity
(H/V)
Macintosh
640 X 480
35.000
66.667
30.240
-/-
832 X 624
49.726
74.551
49.500
+/+
640 X 480
31.496
59.940
25.175
-/-
720 X 400
31.469
70.087
28.322
-/-
640 X 480
37.861
72.809
31.500
-/-
640 X 480
37.500
75.000
31.500
-/-
640 X 480
43.269
85.008
36.000
-/-
800 X 600
35.156
56.250
36.000
+/-
800 X 600
37.879
60.317
40.000
+/+
800 X 600
48.077
72.188
50.000
+/+
800 X 600
46.875
75.000
49.500
+/+
800 X 600
53.674
85.061
56.250
-/-
1024 X 768
48.363
60.004
65.000
-/-
IBM
VESA
GTF
1024 X 768
56.476
70.069
75.000
-/-
1024 X 768
60.023
75.029
78.750
+/+
1024 X 768
68.677
84.997
94.500
+/+
1280 X 768
47.700
60.000
80.136
-/+
English-59