Samsung CTN464 Series User manual

CTN464*B Series
Induction Hob
user manual
This manual is made with 100 % recycled paper.
imagine the possibilities
ENGLISH
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
CTN464FB01_XSA_DG68-00347A-01_EN.indd 1
9/10/2555 18:09:42
using this manual
Please take the time to read this owner’s manual, paying particular attention
to the safety information contained in the following section, before using
your appliance. Keep this manual for future reference. If transferring
ownership of the appliance, please remember to pass the manual on to
the new owner.
IMPORTANT SAFETY SYMBOLS AND PRECAUTIONS.
The following symbols are used in the text of this Owner’s Manual :
WARNING
Hazards or unsafe practices that may result in severe personal
injury or death.
CAUTION
Hazards or unsafe practices that may result in minor personal
injury or property damage.
CAUTION
To reduce the risk of fire, explosion, electric shock, or personal injury
when using your hob, follow these basic safety precaution.
Do NOT attempt.
Do NOT disassemble.
Do NOT touch.
Follow directions explicitly.
Unplug the power plug from the wall socket.
Make sure the machine is grounded to prevent electric shock.
Call the service center for help.
Note
Important
2_ using this manual
CTN464FB01_XSA_DG68-00347A-01_EN.indd 2
9/10/2555 18:09:43
safety instructions
WARNING
ELECTRICAL SAFETY
Be sure the appliance is properly installed and grounded by a qualified technician.
The appliance should be serviced only by qualified service personnel. Repairs carried out by
unqualified individuals may cause injury or serious malfunction. If your appliance is in need
of repair, contact your local service centre. Failure to follow these instructions may result in
damage and void the warranty.
safety instructions
The safety aspects of this appliance comply with all accepted technical
and safety standards. However, as manufacturers we also believe it is our
responsibility to familiarize you with the following safety instructions.
Flush - mounted appliances may be operated only after they have been installed in cabinets
and workplaces that conform to the relevant standards. This ensures sufficient protection
against contact for electrical units as required by the essential safety standards.
If your appliance malfunctions or if fractures, cracks or splits appear:
- switch off all cooking zones;
- disconnect the hob from the mains supply; and
- contact your local service centre.
WARNING
CHILD SAFETY
This appliance is not intended for use by young children or infirm persons without the adequate
supervision of a responsible adult.
Young children should be supervised to ensure that they do not play with the appliance.
The cooking zones will become hot when you cook. Always keep small children away from the
appliance.
safety instructions _3
CTN464FB01_XSA_DG68-00347A-01_EN.indd 3
9/10/2555 18:09:43
WARNING
SAFETY DURING USE
This appliance is to be used only for normal cooking and frying in the home. It is not designed
for commercial or industrial use.
Never use the hob for heating the room.
Take care when plugging electrical appliances into mains sockets near the hob. Mains leads
must not come into contact with the hob.
Overheated fat and oil can catch fire quickly. Never leave surface units unattended when
preparing foods in fat or oil, for example, when cooking chips.
Turn the cooking zones off after use.
Always keep the control panels clean and dry.
Never place combustible items on the hob. It may cause fire.
Do not use the hob to heat aluminium foil, products wrapped in aluminium foil or frozen foods
packaged in aluminium cookware.
There is the risk of burns from the appliance if used carelessly.
Cables from electrical appliances must not touch the hot surface of the hob or hot cookware.
Do not use the hob to dry clothes.
Never store flammable materials such as aerosols and detergents in draws or cupboards under
the hob.
WARNING : Users with Pacemakers and Active Heart Implants must keep their upper body at
a minimum distance of 30cm from induction cooking zones when turned on. If in doubt, you
should consult the manufacturer of your device or your doctor.
WARNING
SAFETY WHEN CLEANING
Always turn the appliance off before cleaning.
For safety reasons do not clean the appliance with a steam jet or high - pressure cleaner.
Clean the hob in accordance with the cleaning and care instructions contained in this manual.
4_ safety instructions
CTN464FB01_XSA_DG68-00347A-01_EN.indd 4
9/10/2555 18:09:43
WARNING
SEVERE WARNING SIGNS FOR INSTALLATION
The installation of this appliance must be performed by a qualified hob service technician
trained by the manufacturer. Please see the section “Installing your Hob”.
Plug the power cord into the proper wall socket or higher and use the socket for this appliance
only. Plug the power plug into the wall socket firmly. In addition, do not use an extension cord.
The installation of this appliance must be performed by a qualified technician or service
company.
- Failing to do so may result in electric shock, fire, an explosion, problems with the product, or
injury.
Appliance should allow to disconnection of the appliance from the supply after installation.
The disconnection may be achieved by having the plug accessible or by incorporating a switch
in the fixed wiring in accordance with the wiring rules.
safety instructions
- Failure to do so and sharing a wall socket with other appliances using a power strip or
extending the power cord may result in electric shock or fire.
- Do not use an electric transformer. It may result in electric shock or fire.
Do not install this appliance near a heater, inflammable material.
Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct
sunlight and water (rain drops).
Do not install this appliance in a location where gas may leak.
- This may result in electric shock or fire.
The appliance is not intended for installing in road vehicles, caravans and similar vehicles etc.
This appliance must be properly grounded.
Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.
- This may result in electric shock, fire, an explosion, or problems with the product.
- Never plug the power cord into a socket that is not grounded correctly and make sure that it
is in accordance with local and national codes.
CAUTION
CAUTION SIGNS FOR INSTALLATION
This appliance should be positioned in such a way that it is accessible to the power plug.
- Failure to do so may result in electric shock or fire due to electric leakage.
Install your appliance on a level and hard floor that can support its weight.
- Failure to do so may result in abnormal vibrations, noise, or problems with the product.
Install the appliance while maintaining the proper distance from the wall.
- Failure to do so may result in fire due to overheating.
The minimum height of free space necessary above the top surface of the hob
WARNING
SEVERE WARNING SIGNS FOR ELECTRIC
Remove all foreign substances such as dust or water from the power plug terminals and
contact points using a dry cloth on a regular basis.
- Unplug the power plug and clean it with a dry cloth.
- Failure to do so may result in electric shock or fire.
safety instructions _5
CTN464FB01_XSA_DG68-00347A-01_EN.indd 5
9/10/2555 18:09:43
Plug the power plug into the wall socket in the right direction so that the cord runs towards the
floor.
- If you plug the power plug into the socket in the opposite direction, the electric wires within
the cable may be damaged and this may result in electric shock or fire.
Plug the power plug into the wall socket firmly. Do not use a damaged power plug, damaged
power cord or loose wall socket.
- This may result in electric shock or fire.
Do not pull or excessively bend the power cord.
Do not twist or tie the power cord.
Do not hook the power cord over a metal object, place a heavy object on the power cord, insert
the power cord between objects, or push the power cord into the space behind the appliance.
- This may result in electric shock or fire.
Do not pull the power cord, when unplugging the power plug.
- Unplug the power plug by holding the plug.
- Failure to do so may result in electric shock or fire.
When the appliance or the cord is damaged, contact your nearest service centre.
CAUTION
CAUTION SIGNS FOR ELECTRIC
Unplug the power plug when the appliance is not being used for long periods of time or during
a thunder/lightning storm.
- Failure to do so may result in electric shock or fire.
Unplug the power plug when the appliance is not being used for long periods of time or during
a thunder/lightning storm.
- Failure to do so may result in electric shock or fire.
WARNING
SEVERE WARNING SIGNS FOR USING
In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without
touching the power plug. Do not touch the appliance or power cord.
- Do not use a ventilating fan.
- A spark may result in an explosion or fire.
During use the appliance becomes hot. Care should be taken to avoid touching heating
elements inside the hob.
ALWAYS use hob gloves when removing a dish from the hob to avoid unintentional burn.
WARNING : The contents of feeding bottles and baby food jars shall be stirred or shaken and
the temperature checked before consumption, in order to avoid burns.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
Children should be supervised to ensure that they do not play with the appliance
WARNING : Only allow children to use the hob without supervision when adequate instructions
have been given so that the child is able to use the hob in a safe way and understands the
hazards of improper use.
6_ safety instructions
CTN464FB01_XSA_DG68-00347A-01_EN.indd 6
9/10/2555 18:09:44
The appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
WARNING : Accessible parts may become hot during use. To avoid burns young children
should be kept away.
Metallic objects such as knives, forks, spoons and lids should not be placed on the hob
surface since they can get hot.
WARNING : Ensure that the appliance is switched off before replacing the lamp to avoid the
possibility of electric shock.
Do not touch the power plug with wet hands.
- This may result in electric shock.
safety instructions
WARNING : If the surface is cracked, switch off the appliance to avoid the possibility of electric
shock. Do not use your hob until the glass surface has been replaced.
Do not turn the appliance off by unplugging the power plug while an operation is in progress.
- Plugging the power plug into the wall socket again may cause a spark and result in electric
shock or fire.
Keep all packaging materials well out of the reach of children, as packaging materials can be
dangerous to children.
- If a child places a bag over its head, it may result in suffocation.
- Failing to do so may result in electric shock, burns or injury.
Never use this appliance for purposes other than cooking.
- Failure to do so may result in fire.
Never heat plastic or paper containers and do not use them with the hob function.
- Failure to do so may result in fire.
Do not over-heat food.
- This may result in fire.
Do not heat food wrapped in paper such as magazines or newspaper.
- This may result in fire.
Do not use or place inflammable sprays or objects near the hob.
- This may result in fire or an explosion.
To heat beverages such as coffee, tea, liquor or water or dishes such as curry, soup or stew,
use a low power setting and make sure to stir the contents while heating them.
- Using a high power setting can cause the contents to boil over without warning and
cause serious burns.
safety instructions _7
CTN464FB01_XSA_DG68-00347A-01_EN.indd 7
9/10/2555 18:09:44
Do not insert fingers, foreign substances or metal objects such as pins or needles into the inlet,
outlet, and holes. If foreign substances are inserted into any of these holes, unplug the power
plug from the wall socket and contact your product provider or nearest service centre.
- Failure to do so may result in electric shock or injury.
NEVER fill the container to the top and choose a container that is wider at the top than at the
bottom to prevent the liquid from boiling over. Bottles with narrow necks may also explode if
overheated.
NEVER heat a babys bottle with the teat on, as the bottle may explode if overheated.
Do not immerse the power cable or plug in water and keep the power cable away from heated
surfaces.
Do not operate this appliance if it has a damaged power cable or plug.
WARNING : Liquids and other foods must not be heated in sealed containers since they are
liable to explode.
Do not attempt to repair, disassemble, or modify the appliance yourself.
- Do not use any fuse(such as cooper, steel wire, etc.) other than the standard fuse.
- When repairing or reinstalling the appliance is required, contact your nearest service centre.
- Failure to do so may result in electric shock, fire, problems with the product, or injury.
If any foreign substance such as water has entered the appliance, unplug the power plug and
contact your nearest service centre.
- Failure to do so may result in electric shock or fire.
If the appliance is flooded, please contact your nearest service centre.
- Failure to do so may result in electric shock or fire.
If the appliance generates a strange noise, a burning smell or smoke, unplug the power plug
immediately and contact your nearest service centre.
- Failing to do so may result in electric shock or fire.
CAUTION
CAUTION SIGNS FOR USING
Take care as beverages or food may be very hot after heating.
- Especially when feeding a child, check that it has cooled sufficiently.
Take care when heating liquids such as water or other beverages.
- Avoid using a slippery container with a narrow neck.
- Failing to do so may result in an abrupt overflow of the contents and cause burns.
Do not hold food or any part thereof during or immediately after cooking.
- Use cooking gloves because it may be very hot and you could burn yourself.
When the surface is cracked, turn the power switch of the appliance off.
- Failure to do so may result in electric shock.
8_ safety instructions
CTN464FB01_XSA_DG68-00347A-01_EN.indd 8
9/10/2555 18:09:44
Small amounts of food require shorter cooking or heating time.
If normal times are allowed they may overheat and burn.
Children should be supervised to ensure that they do not play with the appliance.
Any spillage should be removed from the lid before opening and the hob surface should be
allowed to cool before closing the lid (Model which has lid only).
- This may result in electric shock, fire, problems with the product, or injury.
Do not operate the appliance with wet hands.
- This may result in electric shock.
Do not spray volatile material such as insecticide onto the surface of the appliance.
- As well as being harmful to humans, it may also result in electric shock, fire or problems with
the product.
Do not place the appliance over a fragile object such as a sink or glass object.
safety instructions
Do not stand on top of the appliance or place objects (such as laundry, hob cover, lighted
candles, lighted cigarettes, dishes, chemicals, metal objects, etc.) on the appliance.
- This may result in damage to the sink or glass object.
Take care when removing the wrapping from food that has just been taken out of the appliance.
- If the food is hot, hot steam may be emitted abruptly when removing the wrapping and you
may burn yourself.
Do not unplug the appliance by pulling at the power cord, always grip plug firmly and pull
straight out from the outlet.
- Damage to the cord may cause short-circuit, fire and/or electric shock
Appliances are not intended to be operated by means of an external timer or separate remotecontrol system.
Do not stare at the hob elements (Model which was installed halogen lamp only).
After use, switch off the hob element by its control and do not rely on the pan detector (Model
which was installed pan detector only).
WARNING
SEVERE WARNING SIGNS FOR CLEANING
Do not clean the appliance by spraying water directly onto it.
Do not use benzene, thinner or alcohol to clean the appliance.
- This may result in discoloration, deformation, damage, electric shock or fire.
Before cleaning or performing maintenance, unplug the appliance from the wall socket.
- Failure to do so may result in electric shock or fire.
For your safety, do not use high-pressure water cleaners or steam jet cleaners.
safety instructions _9
CTN464FB01_XSA_DG68-00347A-01_EN.indd 9
9/10/2555 18:09:44
WARNING
CAUTION SIGNS FOR CLEANING
The hob should be cleaned regularly and any food deposits removed.
Failure to maintain the hob in a clean condition could lead to deterioration of the surface that
could adversely affect the life of the appliance and possibly result in a hazardous situation.
Take care not to hurt yourself when cleaning the appliance (external/internal).
- You may hurt yourself on the sharp edges of the appliance.
Do not clean the appliance with a steam cleaner.
- This may result in corrosion.
disposal instructions
WARNING
DISPOSING OF THE PACKAGING MATERIAL
All materials used to package the appliance are fully recyclable. Sheet and hard foam parts
are appropriately marked. Please dispose of packaging materials and old appliances with due
regard to safety and the environment.
WARNING
PROPER DISPOSAL OF YOUR OLD APPLIANCE
WARNING : Before disposing of your old appliance, make it inoperable so that it cannot be a
source of danger.
To do this, have a qualified technician disconnect the appliance from the mains supply and
remove the mains lead.
The appliance may not be disposed of in the household rubbish.
Information about collection dates and public refuse disposal sites is available from your local
refuse department or council.
10_ disposal instructions
CTN464FB01_XSA_DG68-00347A-01_EN.indd 10
9/10/2555 18:09:44
contents
INSTALLING THE HOB
BEFORE YOU BEGIN
20
20
HOB USE
CLEANING AND CARE
29
31
33
WARRANTY AND SERVICE
TECHNICAL DATA
Regulations and compliance
Safety instructions for the installer
Connecting to the mains power supply
Installing into the countertop
Cooking zones
Control panel
Components
Induction heating
The key features of your appliance
Safety shutoff
Residual heat indicator
Temperature detection
Initial cleaning
Contents
12
16
PARTS AND FEATURES
12
12
13
14
16
16
17
17
18
19
19
20
20
20
21
21
21
22
22
23
23
23
24
24
25
26
26
27
28
Cookware for induction cooking zones
Suitability test
Size of pans
Operating noises
Using suitable cookware
Using the touch control sensors
Switching the appliance on
Select cooking zone and heat setting
Switching the appliance off
Switching a cooking zone off
Using the child safety lock
Timer
Power boost control
Power Management
Water boiling
Suggested settings for cooking
specific foods
29 Hob
30 Hob frame (option)
30 To avoid damaging your appliance
31 FAQs and troubleshooting
32 Service
33 Technical data
33 Cooking rings
Contents _11
CTN464FB01_XSA_DG68-00347A-01_EN.indd 11
9/10/2555 18:09:44
installing the hob
WARNING
Be sure the new appliance is installed and grounded only by qualified personnel.
Please observe this instruction. The warranty will not cover any damage that may
occur as a result of improper installation.
Technical data is provided at the end of this manual.
REGULATIONS AND COMPLIANCE
This appliance meets the following standards:
• EN 60335 - 1 and EN 60335 - 2 - 6, relating to the safety of electrical appliances for
household use and similar purposes;
• EN 60350, or DIN 44546 / 44547 / 44548, relating to the operating features of electric
cookers, hobs, ovens, and grills for household use;
• EN55011
• EN 55014-2
• EN 61000 - 3 - 2; and
• EN 61000 - 3 - 3, relating to basic requirements for electromagnetic compatibility (EMC).
This appliance complies with the following EU Directives:
• 2006/95/EC, Low Voltage Directive
• 2004/108/EEC, Electromagnetic Compatibility Directive
SAFETY INSTRUCTIONS FOR THE INSTALLER
• A device must be provided in the electrical installation that allows the appliance to be
disconnected from the mains at all poles with a contact opening width of at least 3 mm.
Suitable isolation devices include line protecting cut - outs, fuses (screw type fuses are to
be removed from the holder), earth leakage trips and contactors.
• With respect to fire protection, this appliance corresponds to EN 60335 - 2 - 6. This type
of appliance may be installed with a high cupboard or wall on one side.
• Drawers may not be fitted underneath the hob.
• The installation must guarantee shock protection.
• The kitchen unit in which the appliance is fitted must satisfy the stability requirements of
DIN 68930.
• For protection against moisture, all cut surfaces are to be sealed with a suitable sealant.
• On tiled work surfaces, the joints in the area where the hob sits must be completely filled
with grout.
• On natural, artificial stone, or ceramic tops, the snap action springs must be bonded in
place with a suitable artificial resin or mixed adhesive.
• Ensure that the seal is correctly seated against the work surface without any gaps.
Additional silicon sealant must not be applied; this would make removal more difficult
when servicing.
• The hob must be pressed out from below when removed.
• A board is to be installed underneath the hob.
• The ventilation gap between the worktop and front of the unit underneath it must not be
covered.
The surface temperature on the underside of the electric hob may exceeds 95°C.
CAUTION To avoid hazard, under bench access must be restricted.
12_ installing the hob
CTN464FB01_XSA_DG68-00347A-01_EN.indd 12
9/10/2555 18:09:44
CONNECTING TO THE MAINS POWER SUPPLY
Before connecting, check that the nominal voltage of the appliance, that is, the voltage
stated on the rating plate, corresponds to the available supply voltage. The rating plate is
located on the lower casing of the hob.
Shut off power to circuit before connecting wires to circuit.
WARNING
WARNING
Once the hob is connected to the mains supply, check that all cooking zones are
ready for use by briefly switching each on in turn at the maximum setting with suitable cookware.
installing the hob
The heating element voltage is AC 230 V~. The appliance also works perfectly on
networks with AC 220 V~ or AC 240 V~.
The hob is to be connected to the mains using a device that allows the appliance to be
disconnected from the mains at all poles with a contact opening width of at least 3 mm,
eg. automatic line protecting cut - out, earth leakage trips or fuse.
The cable connections must be made in accordance with regulations and
WARNING
the terminal screws tightened securely.
When the hob is powered on for the first time, all displays light and the child safety
lock is activated.
WARNING
WARNING
Pay attention (conformity) to phase and neutral allocation of house connection and
appliance (connection schemes); otherwise, components can be damaged.
Warranty does not cover damage resulting from improper installation.
If the supply cord is damaged, it must be replaced by a special cord or assembly
available from the manufacturer or its service agent.
• 1N ~
• 2N ~ : Separate the 2-phase wires
(L1 and L2) before connection.
220-240V ~
220-240V ~
380-415V ~
Green/Yellow
Gray
Black
Brown
Brown
L
WARNING
Green/Yellow
Gray
Black
N
1N ~
L1 L2
N
2N ~
For correct supply connection, follow the wiring diagram attached near the
terminals.
installing the hob _13
CTN464FB01_XSA_DG68-00347A-01_EN.indd 13
9/10/2555 18:09:44
INSTALLING INTO THE COUNTERTOP
Make a note of the serial number on the appliance rating plate prior to installation.
This number will be required in the case of requests for service and is no longer
accessible after installation, as it is on the original rating plate on the underside of
the appliance.
Pay special attention to the minimum space and clearance requirements.
Secure the brackets at both sides with the provided screws before mounting the
hob onto the brackets.
Min. 50 mm
Min. 5 mm
560 mm
ø6
x4
90 °
R3
min. 20
560±1
490±1
600
50
Induction Hob
min. 5 mm
20 mm
Insulation Panel
ventilation gap
Oven
14_ installing the hob
CTN464FB01_XSA_DG68-00347A-01_EN.indd 14
9/10/2555 18:09:45
installing the hob
90 ° x 4
ø2
=
490±1
100
100
=
installing the hob _15
CTN464FB01_XSA_DG68-00347A-01_EN.indd 15
9/10/2555 18:09:45
parts and features
m
COOKING ZONES
m
m
0
18
16
0
m
2
1
18
0
0
21
3
m
m
4
m
m
5
1.
2.
3.
4.
5.
Induction cooking zone 1400 W with Power Boost 2000 W
Induction cooking zone 1800 W with Power Boost 2600 W
Induction cooking zone 2200 W with Power Boost 3200 W
Induction cooking zone 1800 W with Power Boost 2600 W
Control panel
CONTROL PANEL
1
5
1.
2.
3.
4.
5.
6.
7.
8.
7
6
3
8
4
2
Cooking zone selectors
Heat setting selectors
Lock control sensor
On/Off control sensor
Timer control sensor
Indicators for heat settings and residual heat
Keep warm
Water boiling
16_ parts and features
CTN464FB01_XSA_DG68-00347A-01_EN.indd 16
9/10/2555 18:09:45
COMPONENTS
Installation brackets
Screws
INDUCTION HEATING
• The Principle of Induction Heating: When you place your cookware on a cooking
zone and you turn it on, the electronic circuits in your induction hob produce
“induced currents” in the bottom of the cookware which instantly raise cookware’s
temperature.
parts and features
Induction hob
Induced currents
Induction coil
Electronic circuits
• Greater speed in cooking and frying: As the pan is heated directly and not the
glass, the efficiency is greater than in other systems because no heat is lost. Most of
the energy absorbed is transformed into heat.
parts and features _17
CTN464FB01_XSA_DG68-00347A-01_EN.indd 17
9/10/2555 18:09:45
THE KEY FEATURES OF YOUR APPLIANCE
• Ceramic glass cooking surface : The appliance has a ceramic glass cooking
surface and four rapid - response cooking zones.
• Touch control sensors : Your appliance is operated using touch control sensors.
• Easy cleaning : The advantage of the ceramic glass cooking surface and the control
sensors is their accessibility for cleaning. The smooth, flat surface is easy to clean.
• On/Off sensor : The “On/Off” control sensor provides the appliance with a separate
mains switch. Touching this sensor switches the power supply on or off completely.
• Control and function indicators : Digital displays and indicator lights provide
information about settings and activated functions, as well as the presence of
residual heat in the various cooking zones.
• Safety shutoff : A safety shutoff ensures that cooking zones switch off automatically
after a period of time if the setting has not been changed.
• Residual heat indicator : An icon for residual heat appears in the display if the
cooking zone is so hot that there is a risk of burning.
• Power Boost
: Use this function to heat up the contents of the pan faster than
maximum power level ‘ ’. (The display will show ‘ ’.)
• Auto Pan-Detection : Each cooking zone incorporates an automatic pan-detection
system, the system is calibrated in order to recognize pans of a diameter just slightly
smaller than the cooking zone. Pans must always be placed centrally on each
cooking zone. And you should use suitable cookware.
• Digital displays : The four display fields are assigned to the four cooking zones.
They show the following information:
-
the appliance has been switched on,
-
to ,
selected heat settings,
-
residual heat,
-
the child lock is activated; and
-
error message, the touch sensor button has been touched for longer
than 8 seconds.
error message, when the hob is overheated because of abnormal
-
operation. (example : operation with empty cookware)
-
error message, cookware is unsuitable or too small or no cookware has
been placed on the cooking zone.
• Keep warm
: Use this function to keep warm cooked food. (The display will
show ‘ ’.)
• Water boiling
: Use this fuction to boil water. (The display will show ‘ ’.)
After completion, cooking zone will automatically reduce to a lower power level.
WARNING
Use Water boiling fuction only to heat water.
Never leave the hob unattended when in use.
This may result in fire.
18_ parts and features
CTN464FB01_XSA_DG68-00347A-01_EN.indd 18
9/10/2555 18:09:47
SAFETY SHUTOFF
Heat setting
Switch off
1-3
After 6 hours
4-6
After 5 hours
7-9
After 4 hours
10-15
After 1.5 hours
If the Hob is overheated because of abnormal operation,
And the Hob will be switched off.
will be displayed.
parts and features
If one of the cooking zones is not switched off or the heat setting is not adjusted after an
extended period of time, that particular cooking zone will automatically switch itself off.
Any residual warmth will be indicated with
(for “hot”) in the digital displays
corresponding to the particular cooking zones.
The cooking zones switch themselves off at the following times.
If cookware is unsuitable or too small or no cookware has been placed on the
cooking zone,
will be displayed. And after 1 minute the corresponding cooking
zone will be switched off.
Should one or more of the cooking zones switch off before the indicated time has
elapsed, see the section “Troubleshooting”.
Other reasons why a cooking zone will switch itself off
All cooking zones will immediately switch themselves off if liquid boils over and
lands on the control panel.
The automatic shutoff will also be activated if you place a damp cloth on the
control panel. In both of these instances, the appliance will need to be switched
on again using the main On/Off control
sensor after the liquid or the cloth
has been removed .
RESIDUAL HEAT INDICATOR
When an individual cooking zone or the hob is turned off, the presence of residual heat is
shown with an
(for “hot”) in the digital display of the appropriate cooking zones. Even
after the cooking zone has been switched off, the residual heat indicator goes out only
after the cooking zone has cooled.
You can use the residual heat for thawing or keeping food warm.
WARNING
WARNING
As long as the residual heat indicator is illuminated, there is a risk of burns.
If the power supply is interrupted, the
symbol will go out and information about
residual heat will no longer be available. However, it may still be possible to burn
yourself. This can be avoided by always taking care when near the hob.
parts and features _19
CTN464FB01_XSA_DG68-00347A-01_EN.indd 19
9/10/2555 18:09:48
TEMPERATURE DETECTION
If for any reason the temperatures on any of the cooking zones were to exceed the
safety levels, should this happen then the cooking zone will automatically reduce to a
lower power level.
When you have finished using the hob, the cooling fan will continue to run until the hob’s
electronics has cooled down. And the cooling fan switched itself on and off depending
upon the termperature of the electronics.
before you begin
INITIAL CLEANING
Wipe the ceramic glass surface with a damp cloth and ceramic cooktop glass cleaner.
WARNING
Do not use caustic or abrasive cleaners. The surface could be damaged.
hob use
COOKWARE FOR INDUCTION COOKING ZONES
The induction hob can only be turned on when a cookware with a magnetic base is
placed on one of the cooking zones. You can use the following suitable cookware.
Cookware material
Cookware material
Suitable
Steel, Enamelled steel
Yes
Cast iron
Yes
Stainless steel
If appropriately labelled by the manufacturer
Aluminium, Copper, Brass
No
Glass, Ceramic, Porcelain
No
Cookware for induction hob is labelled as suitable by the manufacturer.
Certain cookware can make noise when being used on induction cooking
zones. These noise are not a fault in the appliance and do not affect
operation in any way.
20_ before you begin
CTN464FB01_XSA_DG68-00347A-01_EN.indd 20
9/10/2555 18:09:48
SUITABILITY TEST
Cookware is suitable for induction cooking,
if a magnet sticks to the bottom of the
cookware and cookware is labelled as
suitable by the cookware manufacturer.
hob use
SIZE OF PANS
Induction cooking zones adapt automatically to the size of the bottom of the cookware
up to a cerain limit. However the magnetic part of the bottom of the cookware must
have a minimum diameter depending upon the size of the cooking zone.
Diameter of cooking zones
Minimum diameter of the bottom of the cookware
210 mm
140 mm
180 mm
120 mm
160 mm
100 mm
OPERATING NOISES
If you can hear.
• Cracking noise : cookware is made of different materials.
• Whistling : you use more than two cooking zones and the cookware. is made
of different materials.
• Humming : you use high power levels.
• Clicking : electric switching occurs.
• Hissing, Buzzing : the fan operates.
The noise are normal and do not refer to any defects.
hob use _21
CTN464FB01_XSA_DG68-00347A-01_EN.indd 21
9/10/2555 18:09:48
USING SUITABLE COOKWARE
Better pans produce better results.
• You can recognise good pans by their bases. The base should be as thick and flat as
possible.
• When buying new pans, pay particular attention to the diameter of the base.
Manufacturers often give only the diameter of the upper rim.
• Do not use pans which have damaged bases with rough edges or burrs. Permanent
scratching can occur if these pan are slid across the surface.
• When cold, pan bases are normally bowed slightly inwards (concave). They should
never be bowed outwards (convex).
• If you wish to use a special type of pan, for example, a pressure cooker, a simmering
pan, or a wok, please observe the manufacturer’s instructions.
Energy saving tips
You can save valuable energy by observing the following points.
• Always position pots and pans
before switching on the cooking
zone.
• Dirty cooking zones and pan bases
increase power consumption.
• When possible, position the lids
firmly on the pots and pans to
cover completely.
Right!
Wrong!
• Switch the cooking zones off before
the end of the cooking time to use
the residual heat for keeping foods
warm or for thawing.
USING THE TOUCH CONTROL SENSORS
To operate the touch control sensors, touch the desired panel with the tip of your
pointed finger until the relevant displays illuminate or go out, or until the desired function
is activated.
Ensure that you are touching only one sensor panel when operating the appliance. If
your finger is too flat on the panel, an adjacent sensor may be actuated as well.
22_ hob use
CTN464FB01_XSA_DG68-00347A-01_EN.indd 22
9/10/2555 18:09:48
SWITCHING THE APPLIANCE ON
1. Touch the Lock control
sensor for approximately 3 seconds.
approx
1 sec.
hob use
2. The appliance is switched on using the On/Off
control
sensor.
Touch the On/Off control
sensor for 1
second.
The digital displays will show .
After the On/Off control
sensor has been actuated to switch on
your appliance, a heat setting must be selected within approximately 10
seconds. Otherwise, the appliance will switch itself off for safety reasons.
SELECT COOKING ZONE AND HEAT SETTING
1. For selecting the cooking zone, touch the
corresponding cooking zone’s key.
2. For setting and adjusting the power level,
touch the Heat setting selectors.
If more than one sensor is pressed for longer
than 8 seconds,
will show in the heat setting display. To reset, touch
the On/Off control
sensor.
SWITCHING THE APPLIANCE OFF
To completely switch off the appliance, use the
On/Off control
sensor.
Touch the On/Off control
sensor.
After switching off a single cooking zone or the entire cooking surface,
the presence of residual heat will be indicated in the digital displays of the
corresponding cooking zones in the form of an
(for “hot”).
hob use _23
CTN464FB01_XSA_DG68-00347A-01_EN.indd 23
9/10/2555 18:09:49
SWITCHING A COOKING ZONE OFF
To switch off a cooking zone, return the setting to
by using the control panel’s
control sensor.
To switch off more quickly, touch the corresponding cooking zone’s key
twice.
USING THE CHILD SAFETY LOCK
You can use the child safety lock to safeguard against unintentionally turning on a
cooking zone and activating the cooking surface.
Also the control panel, with the exception of the On/Off control
sensor, can
be locked in order to prevent the settings from being changed unintentionally, for
example, by wiping over the panel with a cloth.
Switching the child safety lock on / off
1. Touch the Lock control sensor for
approximately 3 seconds.
An acoustic signal will sound as confirmation.
approx
3 sec.
2. Touch any control sensor .
will appear in the displays, indicating the child
safety lock has been activated.
3. For switching the child safety lock off, touch the Lock control
again for 3 seconds.
An acoustic signal will sound as confirmation.
sensor
After switching off the appliance, child safety lock will be activated
automatically within some minutes for safety reasons.
24_ hob use
CTN464FB01_XSA_DG68-00347A-01_EN.indd 24
9/10/2555 18:09:50
TIMER
There are two ways to use the timer:
hob use
Using the timer as a safety shutoff:
If a specific time is set for a cooking zone, the cooking zone will shut itself off once
this period of time has elapsed. This function can be used for multiple cooking zones
simultaneously.
Using the timer to count down:
The countdown timer cannot be used if a cooking zone has been switched on.
Setting the safety shutoff
The cooking zone(s) for which you want to apply the safety shutoff must be
switched on.
1. Using the Timer control
sensor, select the
cooking zone for which the safety shutoff time
is to be set.
After the first active cooking zone is selected,
touching the timer’s control sensor will cause
the corresponding indicator to flash slowly.
For example, the front left indicator
corresponds to the front left cooking zone.
will appear in the timer
display.
The next active cooking zone is selected by touching the Timer control
sensor again.
2. Use the Timer setting selectors (
or
) to set the desired amount
of time, for example, 15 minutes,
after which the cooking zone will
automatically switch itself off.
The safety shutoff is now activated.
To display the time remaining for any of the cooking zones, use the Timer
control
sensor.
The corresponding control indicator will begin to blink slowly.
The settings are reset using the Timer setting selectors (
or
). After the
set period of time has elapsed, the cooking zone automatically switches itself off,
an acoustic signal sounds as confirmation and the timer display indicates .
To make the settings more quickly, touch any of the
or
control
sensors until the desired value is reached.
If the
control sensor is touched first, the time setting will begin at 99
minutes; if the
control sensor is touched first, the time setting will begin
at 1 minute.
hob use _25
CTN464FB01_XSA_DG68-00347A-01_EN.indd 25
9/10/2555 18:09:50
Countdown timer
For the countdown timer to be used, the appliance must be switched on but all
the cooking zones must be switched off.
1. Touch the Timer control
sensor.
will appear in the timer display.
2. Set the desired period of time using the Timer setting selectors (
or
).
The countdown timer function is now activated and the remaining time
appears in the timer display.
To adjust the remaining time, touch the Timer control
sensor. and change
the setting using the Timer setting selectors (
or
).
POWER BOOST CONTROL
The power boost function
makes additional power available to the each
cooking zones. (example : bring a large volume of water to the boil)
The power boost function is activated for maximum 10 minutes for each cooking
zones.
After these times, the cooking zones automatically return to power level
In certain circumstances, the Power boost function may be deactivated
automatically to protect the internal electronic components of the hob.
POWER MANAGEMENT
The cooking zones have a maximum power available
to them.
If this power range is exceeded by switching on
the power boost function , Power Management
automatically reduced the heat setting of paired
another cooking zone.
• Left side : No.1 and No.2 is paired cooking zone
• Right side : No.3 and No.4 is paired cooking zone
The indicator for this cooking zone changes from the
heat setting set to maximum possible heat setting.
• Example
Paired another cooking zone’s heat setting (No.4)
Last heat setting of cooking
zone (No.3)
original heat setting
automatically changed heat
setting
Power Boost
15 level
13 level
26_ hob use
CTN464FB01_XSA_DG68-00347A-01_EN.indd 26
9/10/2555 18:09:51
WATER BOILING
1. Touch the corresponding cooking zone’s key.
hob use
2. Touch the Water boiling sensor.
3. Set the desired power level which will be used
after water boiling.
After water boiling, the cooking zone will
automatically reduce to this power level and an
acoustic signal sounds.
WARNING
Use Water boiling fuction only to heat water.
Never leave the hob unattended when in use.
This may result in fire.
The amount of water available for each cooking zone is as follows:
Cooking zone
Amount of water
160 mm
1 Liter ~ 2 Liters
180 mm
1 Liter ~ 3 Liters
210 mm
1 Liter ~ 3 Liters
Use only water at room temperature.
The boiling temperature and time may differ, depending on the amount of water,
the water temperature and the bottom type of the container.
Do not touch or remove the cookware while the Water boiling function is in
progress.
However, this function may not operate properly when the cooking zone is already
hot.
hob use _27
CTN464FB01_XSA_DG68-00347A-01_EN.indd 27
9/10/2555 18:09:51
SUGGESTED SETTINGS FOR COOKING SPECIFIC
FOODS
The figures in the table below are guidelines. The heat settings required for various
cooking methods depend on a number of variables, including the quality of the
cookware being used and the type and amount of food being cooked.
Switch Setting
Cookingmethod
Examples for Use
14-15
Warming
Sautéing
Frying
Warming large amounts of liquid, boiling noodles,
searing meat, (browning goulash,braising meat)
10-13
Intensive
Frying
Steak, sirloin, hash browns, sausages, pancakes /
griddle cakes
8-9
Frying
Schnitzel / chops, liver, fish, rissoles, fried eggs
6-7
Boiling
Cooking up to 1.5 l liquid, potatoes, vegetables
3-5
Steaming
Stewing
Boiling
1-2
Melting
Steaming and stewing of small amounts of
vegetables, boiling rice and milk dishes
Melting butter, dissolving gelatine, melting chocolate
The heat settings indicated in the table above are provided only as guidelines for
your reference.
You will need to adjust the heat settings according to specific cookware and foods.
28_ hob use
CTN464FB01_XSA_DG68-00347A-01_EN.indd 28
9/10/2555 18:09:51
cleaning and care
HOB
Cleaning agents must not come into contact with a heated ceramic glass surface:
All cleaning agents must be removed with adequate amounts of clean water after
cleaning because they can have a caustic effect when the surface becomes hot.
Do not use any aggressive cleaners such as grill or oven sprays, scouring pads or
abrasive pan cleaners.
Clean the ceramic glass surface after each use when it is still warm to the touch.
This will prevent spillage from becoming burnt onto the surface. Remove scales,
watermarks, fat drippings and metallic discolouration with the use of a commercially
available ceramic glass or stainless steel cleaner.
cleaning and care
WARNING
Light Soiling
1. Wipe the ceramic glass surface with a damp cloth.
2. Rub dry with a clean cloth. Remnants of cleaning agent must not be left on
the surface.
3. Thoroughly clean the entire ceramic glass cooking surface once a week with
a commercially available ceramic glass or stainless steel cleaner.
4. Wipe the ceramic glass surface using adequate amounts of clean water and
rub dry with a clean lint - free cloth.
Stubborn Soiling
1. To remove food that has boiled over and stubborn splashes, use a glass
scraper.
2. Place the glass scraper at an angle to the ceramic glass surface.
3. Remove soiling by scraping with the blade.
Glass scrapers and ceramic glass cleaners are
available from specialty retailers.
cleaning and care _29
CTN464FB01_XSA_DG68-00347A-01_EN.indd 29
9/10/2555 18:09:51
Problem Dirt
1. Remove burnt-on sugar, melted plastic, aluminium foil or other materials with
a glass scraper immediately and while still hot.
WARNING
There is a risk of burning yourself when the glass scraper is used on a hot
cooking zone:
2. Clean the hob as normal when it has cooled down.
If the cooking zone on which something has melted has been allowed to
cool, warm it up again for cleaning.
Scratches or dark blemishes on the ceramic
glass surface, caused, for example, by a pan
with sharp edges, cannot be removed. However,
they do not impair the function of the hob.
HOB FRAME (OPTION)
WARNING
Do not use vinegar, lemon juice or scale remover on the hob frame; otherwise dull
blemishes will appear.
1. Wipe the frame with a damp cloth.
2. Moisten dried debris with a wet cloth. Wipe and rub dry.
TO AVOID DAMAGING YOUR APPLIANCE
• Do not use the hob as a work surface or for storage.
• Do not operate a cooking zone if there is no pan on the hob or if the pan is
empty.
• Ceramic glass is very tough and resistant to temperature shock, but it is not
unbreakable.
It can be damaged by a particularly sharp or hard object dropping onto the
hob.
• Do not place pans on the hob frame. Scratching and damage to the finish
may occur.
• Avoid spilling acidic liquids, for example, vinegar, lemon juice and descaling
agents, onto the hob frame, since such liquids can cause dull spots.
• If sugar or a preparation containing sugar comes into contact with a hot
cooking zone and melts, it should be cleaned off immediately with a kitchen
scraper while it is still hot. If allowed to cool, it may damage the surface when
removed.
• Keep all items and materials that could melt, for example, plastics, aluminium
foil and oven foils, away from the ceramic glass surface. If something of this
nature melts onto the hob, it must be removed immediately with a scraper.
30_ cleaning and care
CTN464FB01_XSA_DG68-00347A-01_EN.indd 30
9/10/2555 18:09:52
warranty and service
FAQS AND TROUBLESHOOTING
WARNING
Repairs to the appliance are to be performed only by a qualified service technician.
Improperly effected repairs may result in considerable risk to the user. If your
appliance needs repair, please contact your customer service centre.
What should I do if the cooking zones are not functioning?
Check for the following possibilities:
• The fuse in the house wiring (fuse box) is intact. If the fuses trip a number of
times, call an authorised electrician.
• The appliance is properly switched on.
• The control indicators in the control panel are illuminated.
• The cooking zone is switched on.
• The cooking zones are set at the desired heat settings.
warranty and service
A fault may result from a minor error that you can correct yourself with the help of the
following instructions. Do not attempt any further repairs if the following instructions do
not help in each specific case.
What should I do if the cooking zones will not switch on?
Check for the following possibilities:
• A period of more than 10 seconds has elapsed between when the On/Off
button was actuated and the desired cooking zone switches on (see the
section “Switching the appliance on”).
• The control panel is partially covered by a damp cloth or liquid.
What should I do if the display except for
indicator suddenly disappears?
the residual warmth
This could be a result of one of two possibilities:
• The On/Off sensor was accidentally actuated.
• The control panel is partially covered by a damp cloth or liquid.
What should I do if, after the cooking zones have been switched
off, residual warmth is not indicated in the display?
Check for the following possibility:
• The cooking zone was only briefly used and therefore did not become hot
enough. If the cooking zone is hot, please call the customer service centre.
What should I do if the cooking zone will not switch on or off?
This could be due to one of the following possibilities:
• The control panel is partially covered by a damp cloth or liquid.
• The child safety lock is on.
What should I do if the
display is illuminated?
Check for the following:
• The control panel is partially covered by a damp cloth or liquid. To reset,
press the “On/Off” control sensor.
warranty and service _31
CTN464FB01_XSA_DG68-00347A-01_EN.indd 31
9/10/2555 18:09:52
What should I do if the
display is illuminated?
Check for the following:
• The hob is overheated because of abnormal operation.
• After hob is cooled down, press the “On/Off” control sensor for resetting.
What should I do if the
display is illuminated?
Check for the following:
• Cookware is unsuitable or too small or no cookware has been placed on the
cooking zone
• If you use suitable cookware, displayed message will automatically disapear.
What should I do if the cooling fan runs after the hob is turned
off?
Check for the following:
• When you have finished using the hob, the cooling fan runs by itself for
cooling down.
• After the hob’s electronics has cooled down, the cooling fan will be turned off.
If you request a service call because of an error made in operating the appliance,
the visit from the customer service technician may incur a charge even during the
warranty period.
SERVICE
Before calling for assistance or service, please check the section “Troubleshooting.”
If you still need help, follow the instructions below.
Is it a technical fault?
If so, please contact your customer service centre.
Always prepare in advance for the discussion. This will ease the process of
diagnosing the problem and also make it easier to decide if a customer service
visit is necessary.
Please take note of the following information.
• What form does the problem take?
• Under what circumstances does the problem occur?
When calling, please know the model and serial number of your appliance. This
information is provided on the rating plate as follows:
• Model description
• S/N code (15 digits)
We recommend that you record the information here for easy reference.
Model:
Serial number:
When do you incur costs even during the warranty period?
• if you could have remedied the problem yourself by applying one of the
solutions provided in the section “Troubleshooting”.
• if the customer service technician has to make several service calls because
he was not provided with all of the relevant information before his visit and as
a result, for example, has to make additional trips for parts. Preparing for your
phone call as described above will save you the cost of these trips.
32_ warranty and service
CTN464FB01_XSA_DG68-00347A-01_EN.indd 32
9/10/2555 18:09:52
technical data
TECHNICAL DATA
Worktop cut - out dimensions
575 mm
Depth
505 mm
Height
56 mm
Width
560 mm
Depth
490 mm
Corner radius
3 mm
220 - 240 V ~ 50 / 60 Hz
Connection voltage
Maximum connected load power
Weight
technical data
Appliance dimensions
Width
7.2 kW
Net
11.3 kg
Gross
14.2 kg
COOKING RINGS
Position
Diameter
Power
Rear left
160 mm
1400 W / Boost 2000 W
Front left
210 mm
2200 W / Boost 3200 W
Rear right
180 mm
1800 W / Boost 2600 W
Front right
180 mm
1800 W / Boost 2600 W
technical data _33
CTN464FB01_XSA_DG68-00347A-01_EN.indd 33
9/10/2555 18:09:52
note
CTN464FB01_XSA_DG68-00347A-01_EN.indd 34
9/10/2555 18:09:52
note
CTN464FB01_XSA_DG68-00347A-01_EN.indd 35
9/10/2555 18:09:52
QUESTIONS OR COMMENTS
COUNTRY
AUSTRALIA
NEW ZEALAND
CHINA
HONG KONG
INDIA
INDONESIA
CALL
OR VISIT US ONLINE AT
1300 362 603
0800 SAMSUNG (0800 726 786)
www.samsung.com
400-810-5858
(852) 3698 4698
1800
3030
1800
1800
www.samsung.com/hk (Chinese)
www.samsung.com/hk_en (English)
1100 11
8282
3000 8282
266 8282
0800-112-8888
021-5699-7777
JAPAN
0120-327-527
MALAYSIA
1800-88-9999
PHILIPPINES
1-800-10-SAMSUNG(726-7864) for PLDT
1-800-3-SAMSUNG(726-7864) for Digitel
1-800-8-SAMSUNG(726-7864) for Globe
02-5805777
SINGAPORE
1800-SAMSUNG(726-7864)
THAILAND
1800-29-3232
02-689-3232
TAIWAN
0800-329-999
0266-026-066
VIETNAM
1 800 588 889
www.samsung.com
Code No.: DG68-00347A-01
CTN464FB01_XSA_DG68-00347A-01_EN.indd 36
9/10/2555 18:09:52