Model No. PETL80708.0
Serial No.
Write the serial number in the space
above for reference.
Serial Number
Decal
QUESTIONS?
As a manufacturer, we are committed to providing complete customer
satisfaction. If you have questions,
or if there are missing parts,
please contact us at the numbers
or addresses listed below:
Call: 08457 089 009
Outside UK: 0 (44) 113 3877133
Fax: 0 (44) 113 3877125
E-mail: csuk@iconeurope.com
Write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road, Beeston
Leeds, LS11 8JG
UK
CAUTION
Read all precautions and instructions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL
TABLE OF CONTENTS
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22
EXPLODED DRAWING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
RECYCLING INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover
WARNING DECAL PLACEMENT
This drawing shows the locations of the warning
decals. If a decal is missing or illegible, call
the telephone number on the front cover of
this manual and request a free replacement
decal. Apply the decal in the location shown.
Note: The decals may not be shown at actual
size.
PROFORM is a registered trademark of ICON IP, Inc.
2
IMPORTANT PRECAUTIONS
WARNING:
To reduce the risk of serious injury, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sustained by or through the use of
this product.
1. Before beginning any exercise program, consult your physician. This is especially important for persons over age 35 or persons with
pre-existing health problems.
cuit. No other appliance should be on the
same circuit. When replacing the fuse, an
ASTA approved BS1362 type should be fitted
to the fuse carrier. A 13 amp fuse should be
used.
2. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
12. If an extension cord is needed, use only a 3conductor, 1 mm2 (14-gauge) cord that is no
longer than 5 ft. (1.5 m).
3. Use the treadmill only as described.
13. Keep the power cord away from heated surfaces.
4. Place the treadmill on a level surface, with at
least 8 ft. (2.4 m) of clearance behind it and 2
ft. (0.6 m) on each side. Do not place the
treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.
14. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See TROUBLESHOOTING on page 18 if the treadmill is
not working properly.)
5. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
15. Read, understand, and test the emergency
stop procedure before using the treadmill (see
HOW TO TURN ON THE POWER on page 12).
6. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
16. Never start the treadmill while you are standing on the walking belt. Always hold the
handrails while using the treadmill.
7. Keep children under age 12 and pets away
from the treadmill at all times.
17. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.
8. The treadmill should be used only by persons
weighing 286 lbs. (130 kg) or less.
18. The pulse sensors are not medical devices.
Various factors, including the user's movement, may affect the accuracy of heart rate
readings. The pulse sensors are intended
only as an exercise aid in determining heart
rate trends in general.
9. Never allow more than one person on the
treadmill at a time.
10. Wear appropriate exercise clothes when
using the treadmill. Do not wear loose clothes
that could become caught in the treadmill.
Athletic support clothes are recommended
for both men and women. Always wear athletic shoes. Never use the treadmill with bare
feet, wearing only stockings, or in sandals.
19. Never leave the treadmill unattended while it
is running. Always remove the key, unplug
the power cord, and switch the reset/off circuit breaker to the off position when the
treadmill is not in use. (See the drawing on
page 5 for the location of the circuit breaker.)
11. When connecting the power cord (see page
10), plug the power cord into an earthed cir-
3
20. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 6, and HOW TO FOLD
AND MOVE THE TREADMILL on page 17.)
You must be able to safely lift 45 lbs. (20 kg)
to raise, lower, or move the treadmill.
24.
21. When folding or moving the treadmill, make
sure that the storage latch is holding the
frame securely in the storage position.
DANGER: Always unplug the power
cord immediately after use, before cleaning the
treadmill, and before performing the maintenance and adjustment procedures described in
this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing other than the
procedures in this manual should be performed
by an authorized service representative only.
25. This treadmill is intended for in-home use
only. Do not use this treadmill in a commercial, rental, or institutional setting.
22. Never insert any object into any opening on
the treadmill.
23. Inspect and properly tighten all parts of the
treadmill regularly.
SAVE THESE INSTRUCTIONS
4
BEFORE YOU BEGIN
Thank you for selecting the revolutionary PROFORM®
QUICK START 9.0 treadmill. The QUICK START 9.0
treadmill offers an impressive selection of features designed to make your workouts at home more enjoyable
and effective. And when youʼre not exercising, the
unique treadmill can be folded up, requiring less than
half the floor space of other treadmills.
ing this manual, please see the front cover of this manual. To help us assist you, note the product model
number and serial number before contacting us. The
model number and the location of the serial number
decal are shown on the front cover of this manual.
Before reading further, please familiarize yourself with
the parts that are labeled in the drawing below.
For your benefit, read this manual carefully before
using the treadmill. If you have questions after read-
Console
Pulse Sensor
Accessory Tray
Handrail
Key/Clip
Upright
Reset/Off
Circuit Breaker
Walking Belt
Foot Rail
Platform Cushion
Idler Roller
Adjustment Bolts
5
ASSEMBLY
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to
the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild,
non-abrasive cleaner.
Assembly requires the included hex keys
.
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses
is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it is preattached
to one of the parts to be assembled. To avoid damaging plastic parts, do not use power tools for assembly. Extra hardware may be included.
3/8" Star
Washer (4)–6
3/8" x 1"
Patch Bolt (1)–2
3/8" x 1 1/4"
Patch Bolt (2)–2
3/8" x 1 3/4"
Patch Bolt (3)–2
6
1. Make sure that the power cord is unplugged.
1
Raise the Uprights (86) to the vertical position.
Tip down the handrail assembly.
Handrail
Assembly
Have a second person slide the Right Upright
Cover (92) up the right Upright (86). Partially
tighten a 3/8" x 1" Patch Bolt (1) with a 3/8" Star
Washer (4) into the right Upright and the Base
(94); do not fully tighten the Patch Bolt yet.
86
Attach the left Upright (86) to the Base (94) in
the same way. Then, tighten both 3/8" x 1"
Patch Bolts (1).
86
92
1 4
1
2. Slide the Left Upright Cover (91) and the Right
Upright Cover (92) down against the Base (94).
4
94
2
92
91
7
94
3. Make sure the handrail assembly is resting on
the Uprights (86). If necessary, press down gently on the handrail assembly in the locations
shown by the arrows.
3
4
Attach the handrail assembly to the Uprights
(86) with two 3/8" x 1 1/4" Patch Bolts (2) and
two 3/8" Star Washers (4). Start both Patch
Bolts before tightening either of them.
Handrail
Assembly
2
4
86
2
4. Have a second person hold the Console (103)
near the handrail assembly. Connect the Upright
Wire (87) to the handrail assembly wire (A). See
the inset drawing. The connectors should
slide together easily and snap into place. If
they do not, turn one connector and try again. IF
THE CONNECTORS ARE NOT CONNECTED
PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN YOU TURN ON THE POWER.
Make sure that the Upright Wire and the
handrail assembly wire have connectors that are
the same size.
4
A
103
87
Connect the other handrail assembly wire (B) to
the console wire (C). Insert the connectors and
the excess wire into the handrail assembly.
A
87
8
C
B
Handrail
Assembly
5. Set the Console (103) on the handrail assembly.
Be careful not to pinch the wires.
5
Attach the Console (103) on the handrail assembly with two 3/8" x 1 3/4" Patch Bolts (3) and two
3/8" Star Washers (4). Start both Patch Bolts
before tightening either of them.
103
Handrail
Assembly
3
4
3
4
6. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of clear
plastic on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex
keys is used to adjust the walking belt (see pages 19 and 20).
If you purchase the optional chest pulse sensor (see page 16), follow the steps below to install the receiver included with the chest pulse sensor.
1. Make sure that the power cord is unplugged.
Remove the indicated M4.2 x 13mm Screw (7)
and the Access Door (107) from the Console
Base (106).
2. Connect the wire on the receiver to the indicated wire extending from the Bottom of the
Console Base (106). Hold the receiver so the
antenna is oriented as shown and is facing
the treadmill user. Attach the receiver to the
plastic posts on the Access Door (107) with the
two included small screws.
106
Wires
Antenna
107
3. Make sure that no wires are pinched.
Reattach the Access Door (107) with the M4.2 x
13mm Screw (7). Discard the other wires included with the receiver.
9
7
Receiver
OPERATION AND ADJUSTMENT
THE PRE-LUBRICATED WALKING BELT
Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear.
HOW TO PLUG IN THE POWER CORD
This product must be earthed. If it should malfunction or break
down, earthing provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped
with a power cord having an equipment-earthing conductor and an
earthing plug. IMPORTANT: If the power cord is damaged, it
must be replaced with a manufacturer-recommended power
cord.
1
See drawing 2. Press the pins on the power cord into the metal clips
in the adapter as shown. Close the adapter cover over the end of the
power cord and tighten the screw in the adapter. IMPORTANT:
Make sure that the adapter cover is secure and the screw has
been tightened before using the power cord.
2
See drawing 1. Plug the indicated end of the power cord into the
socket on the treadmill.
Adapter
Cover
Screw
Adapter
See drawing 3. Plug the power cord into an appropriate outlet that is
properly installed and earthed in accordance with all local codes and
ordinances. IMPORTANT: The treadmill is not compatible with
RCD-equipped outlets.
Socket on Treadmill
3
Pins
Metal
Clips
Outlet
DANGER: Improper connection of the equipment-earthing conductor can result in an in-
creased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as
to whether the product is properly earthed. Do not modify the plug provided with the product—if it will
not fit the outlet, have a proper outlet installed by a qualified electrician.
10
CONSOLE DIAGRAM
FEATURES OF THE CONSOLE
workout. iFit workouts automatically control the speed
and incline of treadmill while the voice of a personal
trainer coaches you through every step of your workout.
iFit cards are available separately. To purchase iFit
cards, go to www.iFit.com or call the telephone
number on the front cover of this manual. iFit
cards are also available at select stores.
The treadmill console offers an impressive selection of
features designed to make your workouts more effective and enjoyable. When the manual mode of the console is selected, the speed and incline of the treadmill
can be changed with the touch of a button. As you exercise, the console will display continuous exercise
feedback. You can even measure your heart rate using
the handgrip pulse sensor or the optional chest pulse
sensor (see page 16 for information about the optional
chest pulse sensor).
Whether you select the manual mode or a workout,
you can listen to your favorite workout music or audio
books with the consoleʼs premium stereo sound system.
To turn on the power, see page 12. To use the manual mode, see page 12. To use a preset workout, see
page 14. To use an iFit card, see page 15. To use
the information mode, see page 16. To use the
stereo sound system, see page 16.
In addition, the console features ten preset workouts—
two interval workouts, two wellness workouts, four
weight loss workouts, and two mountain workouts.
Each workout automatically controls the speed and incline of the treadmill as it guides you through an effective exercise session.
IMPORTANT: If there is a sheet of clear plastic on
the face of the console, remove the plastic. To prevent damage to the walking platform, wear clean
athletic shoes while using the treadmill. The first
time the treadmill is used, observe the alignment of
the walking belt, and center the walking belt if necessary (see page 20).
The console also features the new iFit interactive
workout system. The iFit system is compatible with iFit
cards containing workouts designed to help you
achieve specific fitness goals. For example, lose unwanted pounds with the 8-week Weight Loss workout
or train for a long-distance run with the iFit Marathon
11
HOW TO TURN ON THE POWER
HOW TO USE THE MANUAL MODE
1. Insert the key into the console.
IMPORTANT: If the treadmill has been exposed to
cold temperatures, allow it to warm to room temperature before turning on the power. If you do not
do this, you may damage the console displays or
other electrical components.
Plug in the power cord (see
page 10). Next, locate the
reset/off circuit breaker on
the treadmill frame near the
power cord. Make sure that
the circuit breaker is in the
“reset” position.
See HOW TO TURN ON THE POWER at the left.
2. Select the manual mode.
Each time the key is inserted, the manual mode
will be selected. If you
have selected a workout,
press any of the workout
buttons (Interval,
Wellness, Wt. Loss, or Mountain) repeatedly until a
track appears in the matrix.
Reset
Position
IMPORTANT: The console features a display demo
mode, designed to be used if the treadmill is displayed in a store. If the displays light as soon as
you plug in the power cord and switch the reset/off
circuit breaker to the reset position, the demo
mode is turned on. To turn off the demo mode,
hold down the Stop button for a few seconds. If the
displays remain lit, see THE INFORMATION MODE
on page 16 to turn off the demo mode.
3. Start the walking belt and adjust the speed.
To start the walking belt, press the Start button, the
Speed increase button, or one of the speed buttons numbered 2 to 18.
If you press the Start button or the Speed increase
button, the walking belt will begin to move at 2
KM/H. As you exercise, change the speed of the
walking belt as desired by pressing the Speed increase and decrease buttons. Each time you press
a button, the speed setting will change by 0.1
KM/H; if you hold down the button, the speed setting will change in increments of 0.5 KM/H. If you
press one of the numbered speed buttons, the
walking belt will gradually change speed until it
reaches the selected speed setting.
Next, stand on the foot
rails of the treadmill.
Locate the clip attached
Key
to the key (see the drawing at the right), and slide
the clip securely onto the
Clip
waistband of your clothes.
Then, insert the key into
the console. After a moment, the displays will light. IMPORTANT: In an emergency situation, the key can be pulled from the
console, causing the walking belt to slow to a stop.
Test the clip by carefully taking a few steps backward; if the key is not pulled from the console, adjust the position of the clip.
To stop the walking belt, press the Stop button. To
restart the walking belt, press the Start button, the
Speed increase button, or one of the numbered
speed buttons.
4. Change the incline of the treadmill as desired.
Note: The console can display speed and distance in
either kilometers or miles. To find out which unit of
measurement is selected or to change the unit of measurement, see THE INFORMATION MODE on page
16. For simplicity, all instructions in this section refer to
kilometers.
To change the incline of the treadmill, press the
Incline increase and decrease buttons or one of
the incline buttons numbered 0 to 10.
Each time you press the Incline increase or decrease button, the incline will change by 0.5%. If
you press one of the numbered incline buttons, the
incline will gradually change until it reaches the selected incline setting.
12
5. Follow your progress with the displays.
time, the console will not display your heart
rate accurately. See page 16 for information
about the optional chest pulse sensor.
The matrix—When you
select the manual mode,
the matrix will display a
track that represents 1/4
mile (400 meters). As
you exercise, the indicators around the track will appear in succession until
the entire track appears. The track will then disappear and the indicators will again begin to appear
in succession.
The Time/Incline display—The Time/Incline
display can show the
elapsed time. The display will also show the
incline of the treadmill
for several seconds each time the incline changes.
Note: When a workout is selected, the display will
show the time remaining in the workout instead of
the elapsed time.
The Calorie/Pulse display—The Calorie/Pulse
display can show the approximate number of
calories you have
burned. The display will
also show your heart rate when you use the handgrip pulse sensor or the optional chest pulse sensor.
The Distance/Speed
display—The
Distance/Speed display
can show the distance
that you have walked or
run and the speed of the
walking belt.
Before using
the handgrip
pulse sensor,
remove the
sheets of clear
plastic from the
metal contacts.
In addition,
make sure that
your hands are
clean.
Contacts
To measure your heart rate, stand on the foot
rails and hold the metal contacts on the handrail—
avoid moving your hands. Hold the contacts for
approximately ten seconds. When your pulse is
detected, your heart rate will be shown. For the
most accurate heart rate reading, continue to
hold the contacts for about 15 seconds.
7. Turn on the fan if desired.
The fan features high and low speed settings.
Press the Fan button repeatedly to select a fan
speed or to turn off the fan. Note: If the fan is on
when the walking belt is stopped, the fan will turn
off automatically after a few minutes.
8. When you are finished exercising, remove the
key from the console.
Step onto the foot rails, press the Stop button, and
adjust the incline of the treadmill to the lowest
setting. The incline must be at the lowest setting
when you fold the treadmill to the storage position, or you may damage the treadmill. Next, remove the key from the console and put it in a secure
place.
To reset the console, press the Stop button, remove the key, and then reinsert the key.
When you are finished using the treadmill, switch
the reset/off circuit breaker to the “off” position and
unplug the power cord. IMPORTANT: If you do
not do this, the treadmillʼs electrical components may wear prematurely.
6. Measure your heart rate if desired.
Note: If you use the handgrip pulse sensor and
the optional chest pulse sensor at the same
13
HOW TO USE A PRESET WORKOUT
The height of the flashing segment indicates the
speed setting for the current segment. At the end of
each segment, a series of tones will sound and the
new speed and incline settings will appear in the
displays for a few seconds.
1. Insert the key into the console.
See HOW TO TURN ON THE POWER on page 12.
2. Select a preset workout.
If the speed or incline setting is too high or too low
at any time during the workout, you can manually
override the setting by pressing the speed or incline
buttons; however, when the next segment of the
workout begins, the treadmill will automatically
adjust to the speed and incline settings for the
next segment.
To select a preset workout, press the Interval button, the Wellness button, the Wt. Loss button, or
the Mountain button repeatedly.
When a preset workout
is selected, the displays
will show the maximum
incline setting and the
maximum speed setting
of the workout. Then,
the duration of the workout will appear in the display. In addition, a profile of the speed settings of
the workout will scroll across the matrix.
To stop the workout at any time, press the Stop
button. To restart the workout, press the Start button or the Speed increase button. The walking belt
will begin to move at 2 KM/H. When the next segment of the workout begins, the treadmill will automatically adjust to the speed and incline settings for
the next segment.
3. Start the walking belt.
Press the Start button or the speed increase button
to start the workout. A moment after you press the
button, the treadmill will automatically adjust to the
first speed and incline settings of the workout. Hold
the handrails and begin walking.
Each workout is divided into several one-minute
segments. One speed setting and one incline setting are programmed for each segment. Note: The
same speed setting and/or incline setting may be
programmed for consecutive segments.
During the workout, the
profile will show your
progress. The flashing
segment of the profile
represents the current
segment of the workout.
Current Segment
The workout will continue in this way until the last
segment of the workout ends. The walking belt will
then slow to a stop.
4. Follow your progress with the displays.
See step 5 on page 13.
5. Measure your heart rate if desired.
See step 6 on page 13.
6. Turn on the fan if desired.
See step 7 on page 13.
7. When you are finished exercising, remove the
key from the console.
See step 8 on page 13.
14
HOW TO USE AN IFIT CARD
1. Insert the key into the console.
3. Start the walking belt.
Press the Start button or the speed increase to start
the workout. A moment after you press the button,
the treadmill will automatically adjust to the first
speed and incline settings of the workout. Hold the
handrails and begin walking. During the workout, a
personal trainer will guide you through the workout.
See HOW TO TURN ON THE POWER on page 12.
2. Insert an iFit card and select a workout.
To use an iFit workout, insert an iFit card into the
iFit slot; make sure that the iFit card is oriented so
the metal contacts are face-down and are inserted
into the iFit slot.
iFit
Card
If the speed or incline setting for the current segment is too high or too low, you can manually override the setting by pressing the speed or incline
buttons; however, when the next segment begins, the treadmill will automatically adjust to
the speed and incline settings for the next segment.
To stop the workout at any time, press the Stop
button. To restart the workout, press the Start button or the Speed increase button. The walking belt
will begin to move at 2 KM/H. When the next segment of the workout begins, the treadmill will automatically adjust to the speed and incline settings for
the next segment.
iFit Slot
Next, select an iFit workout by pressing the iFit increase and decrease buttons next to the iFit slot.
When an iFit workout is selected, the displays will
show the maximum incline setting and the maximum speed setting of the workout. Then, the duration of the workout will appear in the display. In addition, a profile of the speed settings of the workout
will scroll across the matrix.
Each iFit workout is divided into several oneminute segments. One speed setting and one incline setting are programmed for each segment.
Note: The same speed setting and/or incline setting may be programmed for consecutive segments.
4. Follow your progress with the displays.
See step 5 on page 13.
5. Turn on the fan if desired.
See step 7 on page 13.
6. When you are finished exercising, remove the
key from the console.
See step 8 on page 13.
CAUTION: Always remove iFit cards from the
iFit slot when you are not using them.
15
THE INFORMATION MODE
The console features an information mode that keeps
track of the total distance that the walking belt has
moved and the total number of hours that the treadmill
has been used. The information mode also allows you
to select kilometers or miles to measure distance, and
to turn on and turn off the display demo mode.
To select the information mode, hold down the Stop
button while inserting the key into the console and then
release the Stop button. When the information mode is
selected, the following information will be shown:
The Time/Incline display will
show the total number of
hours the treadmill has been
used.
The Distance/Speed display
will show the total number of
kilometers or miles that the
walking belt has moved.
An “M” for metric kilometers
or an “E” for English miles will
appear in the Calorie/Pulse
display. Press the Speed increase button to change the
unit of measurement if desired.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the consoleʼs
stereo speakers, you must connect your MP3 player,
CD player, or other personal audio player to the console.
To purchase an audio cable, please see the front
cover of this manual. Plug one end of the audio cable
into the MP3 jack labeled “IN.” Plug the other end into
a jack on your MP3 player, CD player, or other personal audio player. Make sure that the audio cable is
fully plugged in.
Next, press the Play button on your MP3 player, CD
player, or other personal audio player. Then, adjust the
volume by pressing the Volume (VOL) buttons on the
console.
If you are using a personal CD player and the CD
skips, set the CD player on the floor or another flat surface instead of on the console.
THE OPTIONAL CHEST PULSE SENSOR
An optional chest pulse sensor offers hands-free operation as it tracks your heart rate during your workouts.
To purchase the optional chest pulse sensor, call
the telephone number on the front cover of this
manual.
The console features a display demo mode, designed to
be used if the treadmill is displayed in a store. While the
demo mode is turned on, the
console will function normally
when you plug in the power cord, switch the reset/off
circuit breaker to the reset position, and insert the key
into the console. However, when you remove the key,
the displays will remain lit, although the buttons will not
function. If the demo mode is turned on, a “d” will appear in the Calorie/Pulse display while the information
mode is selected. To turn on or turn off the demo mode,
press the Speed decrease button.
To exit the information mode, remove the key from the
console.
16
HOW TO FOLD AND MOVE THE TREADMILL
HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill, adjust the incline to the
lowest position. If you do not do this, you may damage the
treadmill when you fold it. Remove the key and unplug the
power cord. CAUTION: You must be able to safely lift 45
lbs. (20 kg) to raise, lower, or move the treadmill.
1. Hold the metal frame firmly in the location shown by
the arrow at the right. CAUTION: To decrease the possibility of injury, do not lift the frame by the plastic
foot rails. Make sure to bend your legs and keep your
back straight as you raise the frame. Raise the frame
about halfway to the vertical position.
2. Raise the frame until the latch knob locks into the storage
position. Make sure that the latch knob is locked in the
storage position.
To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of direct sunlight. Do not leave the treadmill in the storage
position in temperatures above 85° F (30° C).
Frame
Latch Knob
HOW TO MOVE THE TREADMILL
Before moving the treadmill, convert the treadmill to the storage position as described above. Make sure that the latch
knob is locked in the storage position.
1. Hold a handrail and place a foot against one of the wheels.
2. Tilt the treadmill back until it rolls freely on the wheels.
Carefully move the treadmill to the desired location. Never
move the treadmill without tipping it back. To reduce
the risk of injury, use extreme caution while moving
the treadmill. Do not attempt to move the treadmill
over an uneven surface.
3. Place one foot against a wheel, and carefully lower the
treadmill until it is resting in the storage position.
Handrail
Wheel
HOW TO LOWER THE TREADMILL FOR USE
1. See drawing 2. Hold the upper end of the treadmill with your right hand. Pull the latch knob to the left and hold
it. It may be necessary to push the frame forward as you pull the knob to the left. Pivot the frame downward
and release the latch knob.
2. See drawing 1. Hold the metal frame firmly with both hands and lower it to the floor. CAUTION: Do not
grip only the plastic foot rails or drop the frame to the floor. Bend your legs and keep your back straight.
17
TROUBLESHOOTING
Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and
follow the steps listed. If further assistance is needed, please see the front cover of this manual.
PROBLEM: The power does not turn on
SOLUTION: a. Make sure that the power cord is plugged into a properly earthed outlet (see page 10). If an extension cord is needed, use only a 3-conductor, 1 mm2 (14-gauge) cord that is no longer than 5 ft.
(1.5 m). IMPORTANT: The treadmill is not compatible with RCD-equipped outlets.
b. After the power cord has been plugged in, make sure that the key is inserted into the console.
c. Check the reset/off circuit breaker located on the
treadmill frame near the power cord. If the switch
protrudes as shown, the circuit breaker has
tripped. To reset the circuit breaker, wait for five
minutes and then press the switch back in.
c
Tripped
Position
Reset
Position
PROBLEM: The power turns off during use
SOLUTION: a. Check the reset/off circuit breaker (see the drawing above). If the circuit breaker has tripped, wait
for five minutes and then press the switch back in.
b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for
five minutes, and then plug it back in.
c. Remove the key from the console. Reinsert the key into the console.
d. If the treadmill still will not run, please see the front cover of this manual.
PROBLEM: The console displays remain lit when you remove the key from the console
SOLUTION: a. The console features a display demo mode, designed to be used if the treadmill is displayed in a
store. If the displays remain lit when you remove the key, the demo mode is turned on. To turn off
the demo mode, hold down the Stop button for a few seconds. If the displays are still lit, see THE
INFORMATION MODE on page 16 to turn off the demo mode.
PROBLEM: The displays of the console do not function properly
SOLUTION: a. Remove the key from the console and UNPLUG
THE POWER CORD. With the help of a second
person, carefully tip down the Uprights (86). There
may be two Screws (A) in the bottom of the Belly
Pan (83). If there are, remove them. Note: A Phillips
screwdriver with a shaft at least 5 in. (13 cm) long is
required. Then, raise the Uprights.
a
86
83
18
A
Remove the three M4.2 x 19mm Washer Head
Screws (8) and carefully pivot the Motor Hood (65)
off.
65
Locate the Reed Switch (85) and the Magnet (46)
on the left side of the Pulley (47). Turn the Pulley
until the Magnet is aligned with the Reed Switch.
Make sure that the gap between the Magnet and
the Reed Switch is about 1/8 in. (3 mm). If necessary, loosen the 3/4" Screw (6), move the Reed
Switch slightly, and then retighten the Screw.
1/8 in.
6
Reattach the Hood (not shown) with the #8 x 3/4"
Screws (not shown). Reattach the #8 x 2" Screws
(not shown) if necessary. Run the treadmill for a
few minutes to check for a correct speed reading.
85
8
46
47
Top
View
PROBLEM: The incline of the treadmill does not change correctly
SOLUTION: a. With the key in the console, press one of the Incline buttons. While the incline is changing, remove the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the
maximum incline level and then return to the minimum level. This will recalibrate the incline system.
PROBLEM: The walking belt slows when walked on
SOLUTION: a. If an extension cord is needed, use only a 3-conductor, 14-gauge (1 mm2) cord that is no longer
than 5 ft. (1.5 m).
b. If the walking belt is overtightened, treadmill performance may decrease and the walking belt may become damaged. Remove the key and UNPLUG
THE POWER CORD. Using the hex key, turn both
idler roller bolts counterclockwise, 1/4 of a turn.
When the walking belt is properly tightened, you
should be able to lift each edge of the walking belt
2 to 3 in. (5 to 7 cm) off the walking platform. Be
careful to keep the walking belt centered. Then,
plug in the power cord, insert the key, and run the
treadmill for a few minutes. Repeat until the walking
belt is properly tightened.
b
2–3 in.
Idler Roller Bolts
c. If the walking belt still slows when walked on, see the front cover of this manual.
19
PROBLEM: The walking belt is off-center or slips when walked on
SOLUTION: a. If the walking belt is off-center, first remove the
key and UNPLUG THE POWER CORD. If the
walking belt has shifted to the left, use the hex
key to turn the left idler roller bolt clockwise 1/2 of a
turn; if the walking belt has shifted to the right,
turn the bolt counterclockwise 1/2 of a turn. Be
careful not to overtighten the walking belt. Then,
plug in the power cord, insert the key, and run the
treadmill for a few minutes. Repeat until the walking belt is centered.
b. If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD.
Using the hex key, turn both idler roller bolts clockwise, 1/4 of a turn. When the walking belt is correctly tightened, you should be able to lift each
edge of the walking belt 2 to 3 in. (5 to 7 cm) off
the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and carefully walk on the treadmill for
a few minutes. Repeat until the walking belt is
properly tightened.
20
a
b
EXERCISE GUIDELINES
WARNING: Before beginning this
Burning Fat—To burn fat effectively, you must exercise at a low intensity level for a sustained period of
time. During the first few minutes of exercise, your
body uses carbohydrate calories for energy. Only after
the first few minutes of exercise does your body begin
to use stored fat calories for energy. If your goal is to
burn fat, adjust the intensity of your exercise until your
heart rate is near the lowest number in your training
zone. For maximum fat burning, exercise with your
heart rate near the middle number in your training
zone.
or any exercise program, consult your physician. This is especially important for persons
over age 35 or persons with pre-existing
health problems.
The pulse sensor is not a medical device.
Various factors may affect the accuracy of
heart rate readings. The pulse sensor is intended only as an exercise aid in determining
heart rate trends in general.
Aerobic Exercise—If your goal is to strengthen your
cardiovascular system, you must perform aerobic exercise, which is activity that requires large amounts of
oxygen for prolonged periods of time. For aerobic exercise, adjust the intensity of your exercise until your
heart rate is near the highest number in your training
zone.
These guidelines will help you to plan your exercise
program. For detailed exercise information, obtain a
reputable book or consult your physician. Remember,
proper nutrition and adequate rest are essential for
successful results.
WORKOUT GUIDELINES
EXERCISE INTENSITY
Warming Up—Start with 5 to 10 minutes of stretching
and light exercise. A warm-up increases your body
temperature, heart rate, and circulation in preparation
for exercise.
Whether your goal is to burn fat or to strengthen your
cardiovascular system, exercising at the proper intensity is the key to achieving results. You can use your
heart rate as a guide to find the proper intensity level.
The chart below shows recommended heart rates for
fat burning and aerobic exercise.
Training Zone Exercise—Exercise for 20 to 30 minutes with your heart rate in your training zone. (During
the first few weeks of your exercise program, do not
keep your heart rate in your training zone for longer
than 20 minutes.) Breathe regularly and deeply as you
exercise–never hold your breath.
Cooling Down—Finish with 5 to 10 minutes of stretching. Stretching increases the flexibility of your muscles
and helps to prevent post-exercise problems.
EXERCISE FREQUENCY
To find the proper intensity level, find your age at the
bottom of the chart (ages are rounded off to the nearest ten years). The three numbers listed above your
age define your “training zone.” The lowest number is
the heart rate for fat burning, the middle number is the
heart rate for maximum fat burning, and the highest
number is the heart rate for aerobic exercise.
To maintain or improve your condition, complete three
workouts each week, with at least one day of rest between workouts. After a few months of regular exercise, you may complete up to five workouts each
week, if desired. Remember, the key to success is to
make exercise a regular and enjoyable part of your
everyday life.
21
PART LIST—Model No. PETL80708.0
To locate the parts listed below, see the EXPLODED DRAWING near the end of this manual.
Key No. Qty.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
2
2
2
6
5
9
45
3
2
2
2
1
1
2
1
12
10
2
2
4
2
6
2
3
1
2
5
2
2
5
12
2
2
3
1
1
4
2
1
1
2
2
1
2
2
1
1
1
1
1
Description
Key No. Qty.
3/8" x 1" Patch Bolt
3/8" x 1 1/4" Patch Bolt
3/8" x 1 3/4" Patch Bolt
3/8" Star Washer
M4.2 x 13mm Washer Head Screw
M4.2 x 19mm Screw
M4.2 x 13mm Screw
M4.2 x 19mm Washer Head Screw
M8 x 35mm Bolt
M8 x 90mm Bolt
3/8" x 1" Patch Bolt
3/8" x 1 3/4" Bolt
3/8" x 1 1/2" Bolt
3/8" x 1" Bolt
M6 x 45mm Bolt
M4.2 x 10mm Screw
M5.5 x 25.4mm Screw
Motor Bolt
M10 x 50mm Bolt
M4.2 x 13mm Belt Guide Screw
M6 x 70mm Bolt
M4.2 x 25mm Tek Screw
3/8" x 3/4" Bolt
3/8" x 2" Bolt
3/8" x 1 3/4" Bolt
3/8" x 2 1/4" Bolt
#6 x 1/2" Screw
M6 Lock Washer
M6 Flat Washer
#6 Flat Washer
3/8" Jam Nut
M10 Lock Nut
M8 Flange Nut
Hood Clip
Hex Key
5mm Hex Key
Outside Foot Rail Insert
Inside Foot Rail Insert
Left Foot Rail
Walking Platform
Platform Cushion
Belt Guide
Left Front Platform Support
Frame Cap
Frame Spacer
Magnet
Drive Roller/Pulley
Walking Belt
Right Front Platform Support
Latch Cap
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
22
1
1
1
1
1
1
1
2
1
1
1
1
2
1
1
2
1
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
2
2
6
1
1
3
Description
R1208A
Right Foot Rail
Latch
Latch Knob
Frame
Right Rear Platform Support
Ground Wire w/Decal
Right Rear Foot
Roller Bracket Spacer
Idler Roller
Latch Warning Decal
Left Rear Platform Support
Left Rear Foot
Idler Roller Bracket
Hood Accent
Motor Hood
Motor Bushing
Lift Frame
Motor Belt
Drive Motor
Motor Isolator
Power Cord Adapter
Plastic Tie
Controller Ground Wire
Electronics Bracket
Filter
Base Ground Wire
Drive Roller Ground Wire
Transformer
Receptacle
Reset/Off Circuit Breaker
Controller
Power Cord
Belly Pan
Reed Switch Clamp
Reed Switch
Upright
Upright Wire
Incline Motor Wire
Incline Motor
Incline Motor Spacer
Left Upright Cover
Right Upright Cover
Caution Decal
Base
Wheel
Base Foot Spacer
Base Foot
Latch Bracket
Releasable Tie
15 1/2" Cable Tie
Key No. Qty.
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
8
1
1
1
1
1
1
2
1
1
2
1
3
1
1
2
Description
Key No. Qty.
8" Cable Tie
Console Back
Console
Key/Clip
Lower Console
Console Base
Access Door
Console Post
Handrail Frame
Left Handrail Cover
Console Ground Wire
Right Handrail Cover
Cable Tie
Grommet
Console Fan
Foot Rail Insert Decal
117
118
119
120
121
*
*
*
*
*
*
*
*
*
*
1
1
2
1
1
–
–
–
–
–
–
–
–
–
–
Description
4" Ground Wire
M4 x 10mm Bolt
M4.2 Star Washer
M4 Nut
#8 x 1/2" Screw
4" Black Wire, 2F
8" Blue Wire, 2F
8" Blue Wire, F/Flag
16" Blue Wire, M/F
8" White Wire, 2F
8" White Wire, F/Flag
12" Red Wire, M/F
10" Black Wire, M/F
Userʼs Manual
8" Green/Yellow Wire, F/R
Note: Specifications are subject to change without notice. See the back cover of this manual for information about
ordering replacement parts. *These parts are not illustrated.
23
24
21
61
17
37
28
29
35
62
58
63
7
7
38
17
37
36
6
59
10
60
116
21
57
58
28
29
40
6
39
41
17
7
10
6
20
42
43
17
7
55
63
33
56
17
7
48
9
37
54
44
31
38
45
17
37
47
25
53
46
6
41 116
33
52
17
20
9
51
42
15
31
44
45
7
50
24
17
49
EXPLODED DRAWING A—Model No. PETL80708.0
R1208A
EXPLODED DRAWING B—Model No. PETL80708.0
34
8
34
8
34
30
27
30
27
64
27
72
70
69
84
65
121
68
6
18
8
67
11
85
30
66
R1208A
5
11
71
5
82
117
5
81
120
118
119
73
16
16
119
74
80
79
5
83
78
77
25
75
16
16
16
76
EXPLODED DRAWING C—Model No. PETL80708.0
23
4
2
23
87
88
114
12
4
86
2
31
89
13
31
90
91
4
26
93
32
96
97
22
1
31
31
14
92
97
22
94
19
95
R1208A
31
87
31
98
32
14
31
4
93
1
26
97
24
22
95
19
26
96
97
22
100
99
101
EXPLODED DRAWING D—Model No. PETL80708.0
7
7
R1208A
7
7
102
103
104
105
115
7
106
7
110
7
7
7
107
7
109
7
31
7
97
113
7
7
7
108
22
4
3
7
7
108
4
7
16
7
111
112
7
27
7
7
7
7
7
3
97
22
31
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us:
• the model number and serial number of the product (see the front cover of this manual)
• the name of the product (see the front cover of this manual)
• the key number and description of the replacement part(s) (see the PART LIST and the EXPLODED
DRAWING near the end of this manual)
RECYCLING INFORMATION
This electronic product must not be disposed of in municipal waste. To
preserve the environment, this product must be recycled after its useful
life as required by law.
Please use recycling facilities that are authorized to collect this type of waste in
your area. In doing so, you will help to conserve natural resources and improve
European standards of environmental protection. If you require more information
about safe and correct disposal methods, please contact your local city office or
the establishment where you purchased this product.
Part No. 275084 R1208A
Printed in China © 2008 ICON IP, Inc.