Compaq ProLiant SL160z - G6 Server QuickSpecs

QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Overview
Open View:
1. 18 DDRs DIMM slots
2. Up to two Intel® Quad-Core 5500 sequence processors
3. Two 3.5" non-hot plug hard drives using a quick release
drive carrier
Rear View:
1. Serial Port
2. Video Port
3. (2) USB Ports
4. (2) 1Gbit NIC
5. Optional Dedicated Management port
6. UID
7. Optional low profile x16 PCI-e Gen 2
8. Power Button
9. Health LED
What's New
Support for up to two Intel® 5600 sequence processors
Support for Low-voltage memory
At A Glance
The HP ProLiant SL160z G6 server is part of a new family, HP ProLiant SL6000, of HP server solutions optimized for scale-out
customers to greatly reduce costs, maximize power efficiency, by sharing power supplies and fans, and maintain total flexibility.
Two independent HP ProLiant SL160z G6 Servers go into the 2U HP ProLiant z6000 G6 Chassis. The HP ProLiant SL160z G6 Server
is a two socket Intel server with 18 DDR3 DIMM sockets and support for a low profile x16 PCI-e Gen 2 and an internal x4 PCI-e
Gen 2 slot.
The HP ProLiant SL160z G6 is optimized for applications needing large amounts of memory and I/O expansion.
Processors:
Processors
Supports up to two Intel® 5600 sequence processors
Six-Core Intel® Xeon® processors 5600 sequence with 12MB Level 3 cache (depends on model)
Quad-Core Intel® Xeon® processors 5600 sequence with 12MB Level 3 cache (depends on model)
Supports up to two Intel® 5500 sequence processors
Supports up to two Intel® Quad-Core 5500 sequence processors
Quad-Core Intel® Xeon® processors 5500 sequence with 4MB or 8 MB Level 3 cache (depends on model)
Intel® 5520 Chipset
DA - 13385
Worldwide — Version 8 — April 9, 2010
Page 1
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Overview
Memory:
Memory
Up to 192GB (16GB kits populating12 DIMM slots), using PC3-8500R DDR3 Registered (RDIMM) memory, operating
at 800MHz when fully populated in 12 slots
Up to 24GB, using PC3-10600E DDR3 Unbuffered (UDIMM) memory, operating at 1066MHz when fully populated at
2 DIMMs per Channel in 12 slots
NOTE: Low Voltage DIMMs can only be used with Intel® Xeon® processor 5600 series processors.
Internal Drive Support:
Support
Support for up to two 3.5" non-hot plug Serial ATA (SATA) or Serial Attached SCSI (SAS) hard drives using a quick
release drive carrier
Support for up to four 2.5" non-hot plug Serial ATA (SATA), Serial Attached SCSI (SAS), or Solid State Drive (SSD) hard
drives using a quick release drive carrier and the SFF drive cage
Network Controller:
Controller
HP NC362i Integrated Dual Port Gigabit Server Adapter
Storage Controllers:
Controllers
Non-Hot Plug SATA Models: HP Embedded Smart Array B110i SATA RAID Controller (RAID 0, 1, 10)
NOTE: Transfer rate: up to 3 Gb/s SATA
NOTE: A HP Smart Array controller is required for SAS Hard Drives
Expansion Slots:
Slots
Up to two available PCI Express 2.0 slots:
Optional Slot 1: low-profile x16 PCI-Express 2.0
Optional Slot 2: low-profile internal only x4 PCI-Express 2.0
Management:
Management
HP ProLiant Onboard Administrator Powered by Lights-Out 100 with optional LO100i Advanced Licenses for Virtual
KVM and Virtual Media
The HP ProLiant Easy Set-up CDs and ISO image downloads offer Assisted and Manual single server installation, setup,
and deployment capability. Capabilities provided are:
AutoRun
Assisted Installation Microsoft Windows 2003 Server and Microsoft Windows 2008 Server.
OS and SW available for Manual Installation are listed on each servers' QuickSpecs
HP Insight Diagnostics
Smart Components - a self-executable software consisting of driver and firmware
HP Smart Update Manager - a single system and multi-server deployment tool for Windows environments that works
with Smart Components to provide customers with easy-to-use GUI and Script-based deployment capacity
SmartStart Scripting Toolkit - an automated scalable deployment utility
Insight Management Agents for environmental monitoring that is similar to and consistent with that of HP ProLiant 300
series servers and above servers and that allows integration to HP Systems Insight Manager (SIM)
Array Configuration Utility (ACU)
Array Diagnostics Utility (ADU)
HP Insight Control for Linux (IC-Linux), a product option, delivers essential lifecycle management that can help save
time and money by integrating discovery, server deployment, firmware updates & provisioning, health & performance
management, remote management, and virtualization. This makes it easy to optimize your IT infrastructure through a
single, simple management console. The Insight Control for Linux suite supports Linux-based servers and management
consoles.
Operating Systems and Virtualization Software Support for ProLiant Servers:
Servers
Supports Windows, RHEL, SLES, Solaris, VMware ESX, and Citrix Essentials for XenServer
USB Ports:
Ports
Three USB ports (two front, one internal)
NOTE: In order to utilize the internal USB port the USB cable (P/N: 536769-B21) must be connected to the internal
USB header.
Optical Drive:
Drive
External support only
Power Supply:
Supply
DA - 13385
Worldwide — Version 8 — April 9, 2010
Page 2
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Overview
The 2U chassis supports three power supply options:
Common Slot Power Supplies enable power capping and hot-pluggability
HP 1200W CS HE Silver Power Supply (Hot Plug, Autoswitching) (optional)
HP 750W CS HE Gold Power Supply (Hot Plug, Autoswitching) (optional)
HP 460W CS HE Gold Power Supply (Hot Plug, Autoswitching) (optional)
Form Factor:
Factor
HP ProLiant z6000 G6 Chassis - 2U
HP ProLiant SL160z Server - 1U server tray
Deployment/Serviceability:
Deployment/Serviceability
HP ProLiant SL160z G6 models have two different rail kits to choose from:
10U bulk rail kit - Used to fit in HP 10000 series racks
One 10U bulk rail kit will hold up to five z6000 chassis, thus ten SL160z G6 servers
2U rail kit - Used to fit in 3rd party racks or to sell one z6000 chassis at a time
One 2U rail kit will hold one z6000 chassis, thus two SL160z servers
Customer Self Repair (CSR): HP products are designed with many CSR parts to minimize repair time and allow for
greater flexibility in performing defective parts replacement
Warranty:
Warranty
This product is covered by a global limited warranty and supported by HP Services and a worldwide network of HP
Authorized Channel Partners. Hardware diagnostic support and repair is available for one year from date of purchase.
Support for software and initial setup is available for 90 days from date of purchase. Enhancements to warranty services
are available through HP Care Pack services or customized service agreements. Hard drives have either a one year or
three year warranty.
NOTE: Server Warranty includes 1 year Parts, 1 year labor, and 1 year on-site service. Warranty repairs may be
accomplished through the use of Customer Self Repair (CSR) parts. These parts fall into two categories: 1) Mandatory
CSR parts are designed for easy replacement. A travel and labor charge will result when customers decline to replace a
Mandatory CSR part; 2) Optional CSR parts are also designed for easy replacement but may involve added complexity.
Customers may choose to have HP replace Optional CSR parts at no charge. Additional information regarding
worldwide limited warranty and technical support is available at:
http://h18004.www1.hp.com/products/servers/platforms/warranty/index.html.
DA - 13385
Worldwide — Version 8 — April 9, 2010
Page 3
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Standard Features
NOTE: For the Standard Features shipped in the "Factory Integrated Models", please see the "Configuration Information - Factory
Integrated Models" section.
Processor
Six-Core Processors
One of the following
Intel® Xeon® Processor X5680 (3.33 GHz, 12MB L3 Cache, 130W, DDR3-1333, HT, Turbo
depending on Model
1/1/2/2/3/3)
Intel® Xeon® Processor X5670 (2.93 GHz, 12MB L3 Cache, 95W, DDR3-1333, HT, Turbo
2/2/3/3/4/4)
Intel® Xeon® Processor X5660 (2.80 GHz, 12MB L3 Cache, 95W, DDR3-1333, HT, Turbo
2/2/3/3/4/4)
Intel® Xeon® Processor X5650 (2.66 GHz, 12MB L3 Cache, 95W, DDR3-1333, HT, Turbo
2/2/3/3/4/4)
Quad-Core Processors
Intel® Xeon® Processor E5640 (2.66 GHz, 12MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1/1/2/2)
Intel® Xeon® Processor E5630 (2.53 GHz, 12MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1/1/2/2)
Intel® Xeon® Processor E5620 (2.40 GHz, 12MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1/1/2/2)
Intel® Xeon® Processor L5640 (2.40 GHz, 12MB L3 Cache, 60W, DDR3-1066, HT, Turbo
2/2/3/3/4/4)
Intel® Xeon® Processor L5630 (2.13 GHz, 12MB L3 Cache, 40W, DDR3-1066, HT, Turbo 1/1/2/2)
Intel® Xeon® Processor X5570 (2.93 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT, Turbo 2/2/3/3)
Intel® Xeon® Processor X5560 (2.8 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT, Turbo 2/2/3/3)
Intel® Xeon® Processor X5550 (2.66 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT, Turbo 2/2/3/3)
Intel® Xeon® Processor E5540 (2.53 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1/1/2/2)
Intel® Xeon® Processor E5520 (2.26 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT, Turbo 1/1/2/2)
Intel® Xeon® Processor E5506 (2.13 GHz, 4MB L3 Cache, 80W, DDR3-800)
Intel® Xeon® Processor E5504 (2.00 GHz, 4MB L3 Cache, 80W, DDR3-800)
Intel® Xeon® Processor L5530 (2.40 GHz, 8MB L3 Cache, 60W, DDR3-1066, HT, Turbo 1/1/2/2)
Intel® Xeon® Processor L5520 (2.26 GHz, 8MB L3 Cache, 60W, DDR3-1066, HT, Turbo 1/1/2/2)
Intel® Xeon® Processor L5506 (2.13 GHz, 4MB L3 Cache, 60W, DDR3-800)
Dual-Core Processors
Intel® Xeon® Processor E5503 (2.00 GHz, 4MB L3 Cache, 80W, DDR3-800)
Intel® Xeon® Processor E5502 (1.86 GHz, 4MB L3 Cache, 80W, DDR3-800)
NOTE: Available through Configure To Order only. See Factory Integration Models section for more
details.
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using Intel® Turbo Boost
Technology, with 4, 3, 2, and 1 cores active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory speed may
depend on the quantity and type of DIMMs installed.
NOTE: For the Intel 5500 Series, the letter preceding the model number indicates the
performance/wattage of the processor. "X" denotes High Performance/Wattage; "E" denotes Enterprise
Performance/Wattage (Mainstream); and "L" denotes Lower Wattage.
DA - 13385
Worldwide — Version 8 — April 9, 2010
Page 4
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Standard Features
Upgradeability
Upgradeable to two processors
Chipset
Intel® 5520 Chipset
Cache Memory
12MB (1 x 12MB) Level 3 cache
NOTE: All 5600 sequence processor models.
8MB (1 x 8MB) Level 3 cache
NOTE: All processor models except for those identified below.
4MB (1 x 4MB) Level 3 cache
NOTE: For processors L5506, E5506, E5504, E5502 and E5502.
Memory Protection
Advanced memory protection
Memory
Type
DDR3 Registered (RDIMM) or Unbuffered (UDIMM)
Standard (per server tray)
6GB (3 x 2GB) UDIMMs
Maximum (RDIMM) (per
192GB (12 x 16GB) for Registered Memory configurations
server tray)
Maximum (UDIMM) (per
48GB (12 x 4GB) for Unbuffered Memory configurations
server tray)
NOTE: Depending on the memory configuration and processor model, the memory speed may run at
1333MHz, 1066MHz, or 800MHz. Please see the Online Memory Configuration Tool at:
www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information on ProLiant Energy
Efficient Features, see: www.hp.com/go/proliant-energy-efficient.
DA - 13385
Worldwide — Version 8 — April 9, 2010
Page 5
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Standard Features
Network Controller
Expansion Slots
HP NC362i Integrated Dual Port Gigabit Server Adapter
Slot #
Technology Bus Width
1
Connector
Width*
Width
x16
Bus
Number*
Number
1
Device
No.**
No.
0
Form
Factor
Low Profile
Notes
PCI-Express
x16
3.3 volts
2.0
NOTE: All slots can accept universal keyed PCI cards.
* Default bus assignment. Inserting cards with PCI bridges may alter the actual bus assignment number.
** Slots are enumerated differently based on OS. MS OS's enumerate from lowest to highest Device ID
by bus (starting with the lowest bus).
Storage Controller
Non-Hot Plug SATA
HP Embedded Smart Array B110i SATA RAID Controller (RAID 0, 1, 10)
Models:
NOTE: To enable RAID on Embedded SATA, use the HP Smart Array B110i SATA Raid controller, To
enable use of the B110i, enter the ROM based setup utility(RBSU). The option for enabling RAID can be
found in the advanced section of the RBSU. For additional details www.hp.com/go/SATARAID
NOTE: Transfer rate: 3.0 Gb/s SATA
NOTE: A HP Smart Array controller is required for SAS Hard Drives
NOTE: An external diskette drive, USB floppy drive key or virtual FDD using LO100 Advanced Pack is
needed to install storage controller drivers during a Windows operating system installation from a CD.
Storage
Optical Drives
Diskette Drives
Drive Bays
DVD-ROM / DVD RW drives via USB only
Via USB only
None ship standard
Up to 2 Non-hot plug SATA or SAS 3.5" drives
Up to 4 Non-hot plug SATA, SAS, or SSD 2.5" drives (requires SFF drive
cage)
Maximum Internal
Storage
Non-Hot Plug SATA 3.5"
Non-Hot Plug SAS 3.5"
Non-Hot Plug SATA 2.5"
Non-Hot Plug SAS 2.5"
Non-Hot Plug SSD 2.5"
4.0TB
600GB
2.0TB
1.2TB
480GB
DA - 13385
2 x 2TB
2 x 300GB
4 x 500GB
4 x 300GB
4 x 120GB
Worldwide — Version 8 — April 9, 2010
Page 6
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Standard Features
Interfaces
Parallel
Network RJ-45
Serial
Pointing Device (Mouse)
Graphics
Keyboard
USB
Management
Health LED
Power
UID
None
2 10/100/1000 NIC ports (plus 1 optional dedicated port for the HP
ProLiant Lights Out 100i Remote Management)
1
0 (via USB only)
1
0 (via USB only)
3 (two front, one internal)
NOTE: In order to connect a USB device internally, the internal USB Cable
G6 Kit must be used (536769-B21)
NOTE: Please see the following URL for additional information regarding
USB support:
http://h18004.www1.hp.com/products/servers/platforms/usb-support.html.
1 Optional Dedicated LO100i Management Port
1 front per server node
1 front per server node
1 front per server node
Graphics
32MB shared supporting 1600x1200x16M resolution
Form Factor
HP ProLiant z6000 G6 Chassis - 2U Chassis
NOTE: Can support two SL160z server trays in the 2U chassis.
HP ProLiant SL160z G6 Server - 1U server tray
Embedded Manageability HP ProLiant Onboard
HP ProLiant Onboard Administrator Powered by Lights-Out 100 is standard
Administrator Powered by with this server and has LO100i Advanced Licenses for Virtual KVM and
LO100 with LO100i
Virtual Media available as options.
Advanced
Standard Features:
Embedded IPMI reporting
System event log access
Remote Serial console (serial redirection)
Browser, Telnet access
SMASH-CLP compliant
IPMI 2.0 compliant
DCMI 1.0 compliant
Secure Socket Layer Encryption
Secure Shell Encryption
Licensed Features:
Virtual media (Floppy, CD, USB 2.0) with Advanced Licenses
Virtual KVM with Advanced License
DA - 13385
Worldwide — Version 8 — April 9, 2010
Page 7
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Standard Features
HP Insight Control
management software
HP Insight Control for
Linux
HP Insight Control for Linux (IC-Linux), as a product option, delivers essential
lifecycle management that can help save time and money by integrating
discovery, server deployment, firmware updates & provisioning, health &
performance management, remote management, and virtualization. This
makes it easy to optimize your IT infrastructure through a single, simple
management console. The IC-Linux suite installs and licenses software
modules that are integrated into HP System Insight Manager (HP SIM).
HP Insight Control for Linux serves environments requiring a Linux-based
management console. See www.hp.com/go/ic-linux.
HP Insight Control for Linux includes one year of 24 x 7 HP Software
Technical Support and Update Service ensuring rapid access to HP support
staff and proactive delivery of software updates. For more information about
this service, please visit: http://www.hp.com/services/insight
Core Infrastructure
Management
HP Insight Rapid
Deployment software
HP Systems Insight
Manager
Subscriber's Choice
ROMPaq, software and
latest drivers
HP Insight Rapid Deployment software (RDP) extends HP Systems Insight
Manager with a complete deployment solution for HP ProLiant servers. RDP
provides a central location (running on a Windows CMS) to configure server
hardware, deploy Windows, Linux and VMware ESX operating environments
and install HP ProLiant Support Pack drivers using images and scripted
profiles. For more information, visit: http://www.hp.com/go/rdp.
HP Systems Insight Manager (HP SIM) provides a unified, secure and
extensible standards-based environment to centrally manage servers, storage
and other infrastructure devices, (both HP and non-HP) across multiple
operating system platforms.
For additional information, please see: http://www.hp.com/go/insight.
Subscriber's Choice Driver and Support Alerts/Notifications is a web-based
email subscription service that provides software and driver change
notifications for ProLiant products. Sign up at:
http://www.hp.com/go/subscriberschoice and customize your profile to
receive various new alerts as they become available, on a weekly or monthly
basis.
The latest software, drivers, and firmware fully optimized and tested for your
ProLiant server and options; downloaded from Software and Drivers
download pages website at: http://www.hp.com/go/support and from
www.hp.com/servers/easysetup. Contains the following:
HP Insight Management Agents for Systems Insight Manager (SIM)
Integration
HP Systems Management Homepage
Array Configuration Utility (ACU)
Array Diagnostics Utility (ADU)
HP Insight Diagnostics
DA - 13385
Worldwide — Version 8 — April 9, 2010
Page 8
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Standard Features
Industry Standard
Compliance
ACPI V2.0 Compliant
PCI 2.2 Compliant
PXE Support
WOL Support
Microsoft® Logo certifications
IPMI 2.0
DCMI 1.0
SMASH CLP compliant
Security
Power-on password
Setup password
Diskette boot control
Secure Sockets Layer (SSL)
Secure Shell (SSH)
Security - Trusted Platform The TPM (Trusted Platform Module) is a microcontroller chip that can securely store artifacts used to
Module
authenticate the server platform. These artifacts can include passwords, certificates and encryption keys.
Windows® BitLocker™ Drive Encryption (BitLocker) is a data protection feature available in Windows
Server® 2008. BitLocker leverages the enhanced security capabilities of a Trusted Platform Module
(TPM) version 1.2. The TPM works with BitLocker to help protect user data and to ensure that a server
running Windows Server 2008 has not been tampered with while the system was offline. For more
information about TPM, including a white paper, go to: www.hp.com/go/TPM
NOTE: ProLiant OS pre-installed units will come with the partition required for TPM deployment.
NOTE: The TPM key is unique to every TPM deployed server and must be retained. Misplacing or losing
the key could result in data loss.
Server Power Cords
One 6' Highline (IEC-IEC) power cord ships standard
NOTE: HP ProLiant DL and SL servers no longer ship standard with NEMA power cords (163719-002)
that allow connection to 110V US wall outlets in a home or office. ProLiant DL servers are primarily
connected to PDU's in data center racks so they now ship standard with only a PDU power cord
(416151-B21). If a user wishes to power a ProLiant DL server using a 110V receptacle (NEMA-15), the
NEMA power cord (227099-001) must be ordered separately.
If customers require a local power cord, they can check the power cord matrix for the appropriate cord.
Please see the following power cord matrix: http://www.hp.com/go/powercordmatrix.
UPS and PDU Power
Cord Matrix
Please see the UPS and PDU cable matrix's on the HP Power Protection and Management page. Under
Power Cords, click on the "HP Power Cord Matrix" link. That link will list cable descriptions, requirements,
and specifications for UPS and PDU units. Please see the following link:
www.hp.com/products/powercords.
DA - 13385
Worldwide — Version 8 — April 9, 2010
Page 9
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Standard Features
Power Supply
HP has a new design for ProLiant power- the new Common Slot Power Supply bay. This design provides
the customer with commonality in power supplies across multiple platforms to save on the cost of spares
and allows HP to offer multiple power solutions to fit the customers' needs. Many HP ProLiant Servers
come with Common Slot, High Efficiency and Right-Size Power Supplies. The new HP Common Slot
power supplies are designed for the highest power efficiency without degrading performance of the
ProLiant server. Power Supplies have efficiency ratings up to 94%. There are three wattages to choose
from depending on the configuration of your server. To make sure you select the correct power supply to
meet your configuration, please use the HP Power Advisor at: www.hp.com/go/proliant-energy-efficient
or www.hp.com/go/hppoweradvisor. All HP Common Slot power sources are UL, CE Mark Compliant,
Hot Plug and Redundant.
Common Slot ProLiant
It is highly recommended that you use the HP Power Calculator in defining the "Right-Size" power supply
for your needs. HP offers three Power Supply Options:
HP 460Watts, Common Slot,92% Efficiency
HP 750Watts, Common Slot, 92% Efficiency
HP 1200Watts, Common Slot, 90% Efficiency
HP 1200Watts, Common Slot, 94% Efficiency
The HP ProLiant Common Slot Power supplies meet multiple Energy Efficiency Initiatives: Climate Savers
Computing Initiative GOLD and ECOS Consulting 80PLUS GOLD for the 460w and 750w Power
Supplies and Climate Savers Computing Initiative PLATINUM, ECOS Consulting 80PLUS PLATINUM for
1200w Power Supply. HP worked with the EPA on developing an ENERGY STAR Computer Server
specification and we now offer models that meet the requirements. Please visit the ENERGY STAR website
at: www.energystar.gov for a list of qualified platforms.
Optional power supplies can be purchased through power supply option kits (see Power Supply Options
for part numbers).
System Fans
3 system fans ship standard in z6000 chassis
Operating Systems and
Virtualization Software
Support for ProLiant
Servers
Microsoft Windows Server
Microsoft Windows Server Hyper-V
Microsoft HPC Server 2008
Red Hat Enterprise Linux (RHEL)
SUSE Linux Enterprise Server (SLES)
Solaris
VMware ESX
Citrix Essentials for XenServer
NOTE: For more information on HP's Certified and Supported ProLiant Servers for OS and Virtualization
Software and latest listing of software drivers available for your server, please visit our Support Matrix at:
http://www.hp.com/go/ossupport and our driver download page
http://www.hp.com/support/SL160G6.
DA - 13385
Worldwide — Version 8 — April 9, 2010
Page 10
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Standard Features
Rack Airflow
Requirements
Rack 10000 G2 series Cabinets
The increasing power of new high-performance processor technology requires increased cooling
efficiency for rack-mounted servers. The 10000 G2 Series Racks provide enhanced airflow for maximum
cooling, allowing these racks to be fully loaded with servers using the latest processors.
CAUTION: If a third-party rack is used, observe the following additional requirements to ensure
adequate airflow and to prevent damage to the equipment:
Front and rear doors: If your 42U server rack includes closing front and rear doors, you must allow
5,350 sq cm (830 square inches) of hole evenly distributed from top to bottom to permit adequate
airflow (equivalent to the required 64 percent open area for ventilation).
Side: The clearance between the installed rack component and the side panels of the rack must be a
minimum of 7 cm (2.75 inches)
CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack. This
arrangement ensures proper airflow. Using a rack without blanking panels results in improper cooling
that can lead to thermal damage.
NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation CD
provided with the server, or to the server documentation located in the Support section at the following
URL: www.hp.com/servers/SL160z.
Rack Support
HP ProLiant SL160z G6 models have two different rail kits to choose from:
10U bulk rail kit - Used to fit in HP 10000 series racks
One 10U bulk rail kit will hold up to five z6000 chassis, thus ten SL160z G6 servers
2U rail kit - Used to fit in 3rd party racks or to sell one z6000 chassis at a time
One 2U rail kit will hold one z6000 chassis, thus two SL160z servers
For additional information, please visit: www.hp.com/go/rackandpower.
Factory Express Portfolio
for Servers and Storage
HP Factory Express offers configuration, customization, integration and deployment services for HP
servers and storage products. Customers can choose how their factory solutions are built, tested,
integrated, shipped and deployed.
Factory Express offers service packages for simple configuration, racking, installation, complex
configuration and design services as well as individual factory services, such as image loading, asset
tagging, and custom packaging. HP products supported through Factory Express include a wide array of
servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP BladeSystem, HP 9000
servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries and configurable network
switches.
For more information on Factory Express services for your specific server model please contact your sales
representative or go to: http://www.hp.com/go/factory-express.
DA - 13385
Worldwide — Version 8 — April 9, 2010
Page 11
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Standard Features
HP Enterprise
Configurator
The HP eConfigure Enterprise Configurator now provides factory default racking for our HP hardware
portfolio. This approach is aligned with our strategic direction to meet the needs and expectations of our
valued customers. If you require "custom" rack configuration, please contact HP's Customer Business
Center or an Authorized Partner for assistance. http://www.hp.com/products/configurator
HPC Interconnects
NOTE: High Performance Computing (HPC) interconnect technologies are available for the SL160z G6
under the Cluster Platform product portfolio. These high-speed interconnects are fully supported by HP
when they are part of these configure to order clusters. Solutions can be defined with a lot of flexibility
with the help of configuration tools. Please visit the following URL to configure HPC Clusters with
InfiniBand or Gigabit Ethernet Interconnects: http://www.hp.com/techservers/clusters/ucp/index.html
PCI-Express adapters
InfiniBand
Gigabit Ethernet
Service and Support
Use embedded ports
HP Care Pack Services provide total care and support expertise with committed response designed to
meet your IT and business needs.
HP Care Pack Services provide total care and support expertise with committed response designed to
meet your IT and business needs.
HP Care Pack services include coverage for the HP branded hardware options qualified for the server
that are purchased at the same time or afterward and internal to the enclosure. It also includes the 22"
and smaller external monitors and tower UPS options up to 3kVA. These items will be covered at the
same service level and for the same coverage period as the server. Coverage of UPS Battery is not
included and standard warranty terms & conditions apply. For servers or storage systems installed within
a rack, service also covers all HP qualified rack options installed within the same rack.
To fully capitalize on your HP ProLiant servers' capabilities requires a service partner who thoroughly
understands your server technology and systems environment. HP Services, an industry leader in
provision of multi vender support solutions provides a range of support services designed to meet the
varying needs of business. Whether an SMB or large global corporation HP has a ProLiant server support
offer to help you speedily deploy and maximize system uptime.
Recommended Service - Simplify ProLiant solution implementation, maintenance and management.
Support Service - 3 Year, 9x5 Next Business Day coverage, excluding HP holidays only
Deployment Service - Hardware Installation only
Enhanced Service - Optimize service level to increase IT performance and availability
Support Service - 3 Year 13x5 Same Business Day, 4-Hour response coverage
Deployment Service - Installation and Start-up only
Installation & Start-Up of a ProLiant server and Microsoft or Linux O/S per the Customer Description
and/or Data Sheet. To be delivered on a scheduled basis 8am-5pm, M-F, excl. HP holidays.
For a complete listing of service offerings and information visit:
http://www.hp.com/services/proliantservices
http://www.hp.com/services/carepack
DA - 13385
Worldwide — Version 8 — April 9, 2010
Page 12
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Models
Non-Hot Plug Serial ATA (SATA) Model
NOTE: Non-Hot Plug models are not upgradeable to Hot Plug.
NOTE: A rail kit is not included in model - this allows for the purchase of the right size rail kit.
NOTE: This Model includes two HP ProLiant SL160z Server trays. Details below represent configuration of each tray.
0ne Intel® Xeon® Processor X5550 (2.66 GHz, 8MB L3 Cache, 95W,
HP ProLiant SL160z G6, Processor(s)
2 trays, X5550, 6GB
DDR3-1333, HT, Turbo 2/2/3/3)
539612-xx1
8MB shared L3 cache
Cache Memory
6GB (3 x 2GB) PC3-10600E (UDIMM)
Memory
HP NC362i Integrated Dual Port Gigabit Server Adapter
Network Controller
HP Embedded Smart Array B110i SATA RAID Controller (RAID 0, 1, 10)
Storage Controller
None ship standard
Hard Drive
Up to 2 large form factor Non-Hot Plug drives/Server tray using quick
Internal Storage
release carrier
750W
Power Supply
3 system fans ship standard in z6000 chassis
Fans
One HP ProLiant z6000 G6 Chassis
Form Factor
Two HP ProLiant SL160z G6 Server
Country Code Key
xx=00
xx=20
xx=29
xx=37
xx=42
xx=AA
US
Brazil
Japan
APD
Europe
PRC
DA - 13385
Worldwide — Version 8 — April 9, 2010
Page 13
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Configuration Information - Factory Integrated Models
NOTE: This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid configurations are
ordered, HP recommends the use of an HP approved configurator. Contact your local sales representative for additional
information.
NOTE: HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must start
with a CTO Chassis.
NOTE: FIO indicates that this option is a Factory Installable Option.
Step 1: Base Configuration (choose one from each list unless otherwise noted)
HP Chassis
HP Server Node
HP Rail Kits
HP Power Supplies
HP ProLiant z6000 G6 Chassis
NOTE: ships with 2U chassis and 3 fans.
HP ProLiant SL160z G6 Server
NOTE: It is required that 2 server trays be purchased.
NOTE: Each SL160z tray has 1 system board.
HP ProLiant z6000 G6 2U rail kit
NOTE: 2U rail kit used for HP or 3rd part racks - allows addition of one z6000
chassis at a time.
HP ProLiant z6000 G6 10U Bulk rail kit
NOTE: 10U rail kit used for HP racks ONLY - allows addition of five z6000 chassis at
a time.
NOTE: Refer to HP Power Advisor when selecting a power supply for your
configuration, www.hp.com/go/hppoweradvisor. Many HP ProLiant Servers now offer
new power options, including Common Slot Power Supplies. These power supplies
come in multiple power ratings and higher efficiency levels to offer the Right Size
solution to fit your configuration. This provides improved power delivery and the
advantage of reclaiming lost power. Prior to making a power supply selection it is
"highly recommended" that the "HP Power Advisor" is run to determine the right size
power supply for your server configuration. The HP Power Advisor is located at
"www.hp.com/go/proliant-energy-efficient" or www.hp.com/go/hppoweradvisor
HP 460W CS HE Gold Power Supply
HP 750W CS HE Gold Power Supply
HP 1200W CS HE Silver Power Supply
538080-B21
570145-B21
570226-B21
570227-B21
503296-B21
512327-B21
500172-B21
Step 2: Choose Required Server Node Options (only one of the following from each list
unless otherwise noted)
HP Processors
Six-Core Processors
Intel® Xeon® Processor X5680 (3.33 GHz, 12MB L3 Cache, 130W, DDR3-1333,
HT, Turbo 1/1/2/2/3/3), FIO
NOTE: If 2 processors are desired, select one 591892-L21 and one 591892-B21.
Intel® Xeon® Processor X5670 (2.93 GHz, 12MB L3 Cache, 95W, DDR3-1333, HT,
Turbo 2/2/3/3/4/4), FIO
NOTE: If 2 processors are desired, select one 591896-L21 and one 591896-B21.
Intel® Xeon® Processor X5660 (2.80 GHz, 12MB L3 Cache, 95W, DDR3-1333, HT,
Turbo 2/2/3/3/4/4), FIO
NOTE: If 2 processors are desired, select one 591898-L21 and one 591898-B21.
DA - 13385
Worldwide — Version 8 — April 9, 2010
591892-L21
591896-L21
591898-L21
Page 14
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Configuration Information - Factory Integrated Models
Intel® Xeon® Processor X5650 (2.66 GHz, 12MB L3 Cache, 95W, DDR3-1333, HT,
Turbo 2/2/3/3/4/4), FIO
NOTE: If 2 processors are desired, select one 591900-L21 and one 591900-B21.
Quad-Core Processors
Intel® Xeon® Processor E5640 (2.66 GHz, 12MB L3 Cache, 80W, DDR3-1066, HT,
Turbo 1/1/2/2), FIO
NOTE: If 2 processors are desired, select one 591906-L21 and one 591906-B21.
Intel® Xeon® Processor E5630 (2.53 GHz, 12MB L3 Cache, 80W, DDR3-1066, HT,
Turbo 1/1/2/2), FIO
NOTE: If 2 processors are desired, select one 591902-L21 and one 591902-B21.
Intel® Xeon® Processor E5620 (2.40 GHz, 12MB L3 Cache, 80W, DDR3-1066, HT,
Turbo 1/1/2/2), FIO
NOTE: If 2 processors are desired, select one 591904-L21 and one 591904-B21.
Intel® Xeon® Processor L5640 (2.26 GHz, 12MB L3 Cache, 60W, DDR3-1333, HT,
Turbo 2/2/3/3/4/4), FIO
NOTE: If 2 processors are desired, select one 591912-L21 and one 591912-B21.
Intel® Xeon® Processor L5630 (2.13 GHz, 12MB L3 Cache, 40W, DDR3-1066, HT,
Turbo 1/1/2/2), FIO
NOTE: If 2 processors are desired, select one 591923-L21 and one 591923-B21.
Intel® Xeon® Processor X5570 (2.93 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT,
Turbo 2/2/3/3), FIO
NOTE: If 2 processors are desired, select one 539214-L21 and one 539214-B21.
Intel® Xeon® Processor X5560 (2.8 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT,
Turbo 2/2/3/3), FIO
NOTE: If 2 processors are desired, select one 588189-L21 and one 588189-B21.
Intel® Xeon® Processor X5550 (2.66 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT,
Turbo 2/2/3/3), FIO
NOTE: If 2 processors are desired, select one 570804-L21 and one 570804-B21.
Intel® Xeon® Processor E5540 (2.53 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT,
Turbo 1/1/2/2), FIO
NOTE: If 2 processors are desired, select one 539212-L21 and one 539212-B21.
Intel® Xeon® Processor E5520 (2.26 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT,
Turbo 1/1/2/2), FIO
NOTE: If 2 processors are desired, select one 539200-L21 and one 539200-B21.
Intel® Xeon® Processor E5506 (2.13 GHz, 4MB L3 Cache, 80W, DDR3-800)
NOTE: If 2 processors are desired, select one 591908-L21 and one 591908-B21.
Intel® Xeon® Processor E5504 (2.00 GHz, 4MB L3 Cache, 80W, DDR3-800), FIO
NOTE: If 2 processors are desired, select one 539198-L21 and one 539198-B21.
Intel® Xeon® Processor L5530 (2.40 GHz, 8MB L3 Cache, 60W, DDR3-1066, HT,
Turbo 1/1/2/2), FIO
NOTE: If 2 processors are desired, select one 586599-L21 and one 586599-B21.
Intel® Xeon® Processor L5520 (2.26 GHz, 8MB L3 Cache, 60W, DDR3-1066, HT,
Turbo 1/1/2/2), FIO
NOTE: If 2 processors are desired, select one 539202-L21 and one 539202-B21.
Intel® Xeon® Processor L5506 (2.13 GHz, 4MB L3 Cache, 60W, DDR3-800), FIO
NOTE: If 2 processors are desired, select one 571696-L21 and one 571696-B21.
Dual-Core Processors
DA - 13385
Worldwide — Version 8 — April 9, 2010
591900-L21
591906-L21
591902-L21
591904-L21
591912-L21
591923-L21
539214-L21
588189-L21
570804-L21
539212-L21
539200-L21
591908-L21
539198-L21
586599-L21
539202-L21
571696-L21
Page 15
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Configuration Information - Factory Integrated Models
Intel® Xeon® Processor E5503 (2.00 GHz, 4MB L3 Cache, 80W, DDR3-800)
NOTE: If 2 processors are desired, select one 591910-L21 and one 591910-B21.
Intel® Xeon® Processor E5502 (1.86 GHz, 4MB L3 Cache, 80W, DDR3-800), FIO
NOTE: If 2 processors are desired, select one 571694-L21 and one 571694-B21.
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading
Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using
Intel® Turbo Boost Technology, with 4, 3, 2, and 1 cores active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory
speed may depend on the quantity and type of DIMMs installed.
NOTE: For the Intel 5500 Series, the letter preceding the model number indicates the
performance/wattage of the processor. "X" denotes High Performance/Wattage; "E"
denotes Enterprise Performance/Wattage (Mainstream); and "L" denotes Lower
Wattage.
HP Memory
Registered DIMMs (RDIMMs)
HP 2GB 2Rx8 PC3-10600R-9 Kit
HP 4GB 2Rx4 PC3-10600R-9 Kit
HP 4GB 4Rx8 PC3-8500R-7 LP Kit
HP 4GB 1Rx4 PC3-10600R-9 Kit
HP 4GB 1Rx4 PC3L-10600R-9 Kit
NOTE: Low Voltage DIMMs can only be used with Intel® Xeon® processor 5600
series processors.
HP 8GB 2Rx4 PC3-8500R-7 Kit
HP 8GB 2Rx4 PC3-10600R-9 Kit
HP 8GB 2Rx4 PC3L-10600R-9 Kit
NOTE: Low Voltage DIMMs can only be used with Intel® Xeon® processor 5600
series processors.
HP 16GB 4Rx4 PC3-8500R-7 Kit
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: Maximum 12 DIMMs supported per node.
HP 1GB 1Rx8 PC3-10600E-9 Kit
HP 2GB 2Rx8 PC3-10600E-9 Kit
HP 4GB 2Rx8 PC3-10600E-9 Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3 Memory
Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information on
ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient.
NOTE: There is a maximum support limitation of 8 ranks per memory channel
(maximum of 2 quad rank DIMMs per channel)
NOTE: PC3L is a low voltage memory
DA - 13385
Worldwide — Version 8 — April 9, 2010
591910-L21
571694-L21
500656-B21
500658-B21
500660-B21
593339-B21
604504-B21
516423-B21
500662-B21
604506-B21
500666-B21
500668-B21
500670-B21
500672-B21
Page 16
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Configuration Information - Factory Integrated Models
HP Hard Drive
HP Storage Controllers
NOTE: Transfer rates of drives are dependent on the maximum transfer rate
supported by the Controller. Refer to the Controller technical specifications for details.
NOTE: Hard drives have either a one year or three year warranty.
NOTE: The hard drives use a quick release carrier.
NOTE: One 2 Drive SFF Drive Cage (582657-B21) is required when installing 2
SFFF drives
NOTE: when Adding SAS one of the following cable kits needs to be ordered
depending on which SAS controller installing - HP P212 SAS 4HDD Cable Kit
574001-B21 or HP P410 SAS 4HDD Cable Kit 583997-B21.
SAS Enterprise (ENT) Drives - with quick-release (QR) carrier
HP 600GB 6G SAS 15K 3.5in QR DP ENT HDD
HP 300GB 6G SAS 15K 3.5in QR DP ENT HDD
574758-B21
585980-B21
HP 300GB 6G SAS 10K 2.5in QR DP ENT HDD
SATA Entry (ETY) Drives - with quick-release (QR) carrier
HP 160GB 3G SATA 7.2K 3.5in QR ETY HDD
SATA Midline (MDL) Drives - with quick-release (QR) carrier
HP 2TB 3G SATA 7.2K 3.5in QR MDL HDD
HP 1TB 3G SATA 7.2K 3.5in QR MDL HDD
HP 500GB 3G SATA 7.2K 3.5in QR MDL HDD
HP 500GB 3G SATA 7.2K 2.5in QR MDL HDD
HP 160GB 3G SATA 7.2K 2.5in QR MDL HDD
NOTE: HP P212 SAS 4HDD Cable Kit (574001-B21) is needed when adding more
than two 2.5" hard drives.
SATA Midline (MDL) Solid State Drives - with quick-release (QR) carrier
HP 120GB 3G SATA 2.5in QR MDL SSD
HP 60GB 3G SATA 2.5in QR MDL SSD
574879-B21
HP P212/256 FIO SA Cntrlr w/Battery
NOTE: HP P212 SAS 4HDD Cable Kit is required when adding SAS hard drives using
the P212 controller (574001-B21)
NOTE: HP z6000 BBWC HDWR KIT is required when adding BBWC (582653-B21)
HP Smart Array P410/ZM FIO Controller
NOTE: HP P410 SAS 4HDD Cable Kit is required when adding SAS hard drives using
the P410 controller (583997-B21)
HP Smart Array P410/256 MB w/ Battery FIO
NOTE: HP P410 SAS 4HDD Cable Kit is required when adding SAS hard drives using
the P410 controller (583997-B21)
NOTE: HP z6000 BBWC HDWR KIT is required when adding BBWC (582653-B21)
HP Smart Array P411/256 MB w/ Battery FIO
NOTE: HP z6000 BBWC HDWR KIT is required when adding BBWC (582653-B21)
491191-B21
DA - 13385
Worldwide — Version 8 — April 9, 2010
574021-B21
574755-B21
574025-B21
574023-B21
574953-B21
574893-B21
586587-B21
586585-B21
462860-B21
491195-B21
491193-B21
Page 17
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Configuration Information - Factory Integrated Models
Step 3: Choose Additional Options for Factory Integration
HP Insight Software
HP Insight Control for Linux, No Media 1-Server License Factory-Integratable Option
(FIO) including 1 year of 24x7 Technical Support and Updates
NOTE: For additional options, please refer to the "Core Options" and "Additional Options" section below.
DA - 13385
Worldwide — Version 8 — April 9, 2010
TC203A
Page 18
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Core Options
NOTE: Some options may not be factory integrated. Please contact your local sales representative for additional information.
HP Dedicated MGT Port Kit
516006-B21
HP Unique Options
HP PCI-E x4 Riser SL160z G6
571408-B21
HP I/O Riser x16 SL160/170 G6 KIT
574806-B21
HP ProLiant z6000 Redundant Fan Kit
538082-B21
HP Internal USB Cable G6 Kit
536769-B21
HP ProLiant z6000 Tray blank kit
574551-B21
NOTE: This is needed to help with cooling if a tray is removed from the z6000.
HP ProLiant z6000 Cable Management Kit
575156-B21
NOTE: This is needed when using Fiber cables.
1U Filler Panel Blank Mounting Bracket
NOTE: This is needed to mount the 1U blanking panel back with server when the
server is recessed mounted.
HP P212 SAS 4HDD Cable Kit
NOTE: This is required when adding SAS hard drives using the P212 controller.
NOTE: This is required when adding more than two 2.5" hard drives.
HP P410 SAS 4HDD Cable Kit
NOTE: This is required when adding SAS hard drives using the P410 controller.
HP z6000 BBWC HDWR KIT
NOTE: This is required when adding BBWC
2 Drive SFF Drive Cage
NOTE: This is required when adding SFF (2.5") SSD or hard drives
HP z6000 Processor / Memory Blank Kit
NOTE: This is optional to give the best cooling efficiency when server trays are not
configured exactly the same in the z6000 chassis
HP Processor
Six-Core Processors
Intel® Xeon® Processor X5680 (3.33 GHz, 12MB L3 Cache, 130W, DDR3-1333,
HT, Turbo 1/1/2/2/3/3)
Intel® Xeon® Processor X5670 (2.93 GHz, 12MB L3 Cache, 95W, DDR3-1333, HT,
Turbo 2/2/3/3/4/4)
Intel® Xeon® Processor X5660 (2.80 GHz, 12MB L3 Cache, 95W, DDR3-1333, HT,
Turbo 2/2/3/3/4/4)
Intel® Xeon® Processor X5650 (2.66 GHz, 12MB L3 Cache, 95W, DDR3-1333, HT,
Turbo 2/2/3/3/4/4)
Quad-Core Processors
Intel® Xeon® Processor E5640 (2.66 GHz, 12MB L3 Cache, 80W, DDR3-1066, HT,
Turbo 1/1/2/2)
Intel® Xeon® Processor E5630 (2.53 GHz, 12MB L3 Cache, 80W, DDR3-1066, HT,
Turbo 1/1/2/2)
Intel® Xeon® Processor E5620 (2.40 GHz, 12MB L3 Cache, 80W, DDR3-1066, HT,
Turbo 1/1/2/2)
Intel® Xeon® Processor L5640 (2.26 GHz, 12MB L3 Cache, 60W, DDR3-1333, HT,
Turbo 2/2/3/3/4/4)
DA - 13385
Worldwide — Version 8 — April 9, 2010
579069-B21
574001-B21
583997-B21
582653-B21
582657-B21
579255-B21
591892-B21
591896-B21
591898-B21
591900-B21
591906-B21
591902-B21
591904-B21
591912-B21
Page 19
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Core Options
Intel® Xeon® Processor L5630 (2.13 GHz, 12MB L3 Cache, 40W, DDR3-1066, HT,
Turbo 1/1/2/2)
Intel® Xeon® Processor X5570 (2.93 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT,
Turbo 2/2/3/3)
Intel® Xeon® Processor X5560 (2.8 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT,
Turbo 2/2/3/3)
Intel® Xeon® Processor X5550 (2.66 GHz, 8MB L3 Cache, 95W, DDR3-1333, HT,
Turbo 2/2/3/3)
Intel® Xeon® Processor E5540 (2.53 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT,
Turbo 1/1/2/2)
Intel® Xeon® Processor E5520 (2.26 GHz, 8MB L3 Cache, 80W, DDR3-1066, HT,
Turbo 1/1/2/2)
591923-B21
Intel® Xeon® Processor E5506 (2.13 GHz, 4MB L3 Cache, 80W, DDR3-800)
Intel® Xeon® Processor E5504 (2.00 GHz, 4MB L3 Cache, 80W, DDR3-800)
Intel® Xeon® Processor L5530 (2.40 GHz, 8MB L3 Cache, 60W, DDR3-1066, HT,
Turbo 1/1/2/2)
Intel® Xeon® Processor L5520 (2.26 GHz, 8MB L3 Cache, 60W, DDR3-1066, HT,
Turbo 1/1/2/2)
Intel® Xeon® Processor L5506 (2.13 GHz, 4MB L3 Cache, 60W, DDR3-800)
Dual-Core Processors
Intel® Xeon® Processor E5503 (2.00 GHz, 4MB L3 Cache, 80W, DDR3-800)
Intel® Xeon® Processor E5502 (1.86 GHz, 4MB L3 Cache, 80W, DDR3-800)
NOTE: HT indicates that the processor model supports Intel® Hyper-Threading
Technology.
NOTE: Turbo indicates the maximum potential frequency increment when using
Intel® Turbo Boost Technology, with 4, 3, 2, and 1 cores active.
NOTE: DDR3 speed is the maximum memory speed of the processor. Actual memory
speed may depend on the quantity and type of DIMMs installed.
NOTE: For the Intel 5500 Series, the letter preceding the model number indicates the
performance/wattage of the processor. "X" denotes High Performance/Wattage; "E"
denotes Enterprise Performance/Wattage (Mainstream); and "L" denotes Lower
Wattage.
NOTE: Existing SL products cannot be upgraded with 130watt processors, new
purchase only
591908-B21
539198-B21
586599-B21
DA - 13385
Worldwide — Version 8 — April 9, 2010
539214-B21
588189-B21
570804-B21
539212-B21
539200-B21
539202-B21
571696-B21
591910-B21
571694-B21
Page 20
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Core Options
HP Memory
HP Hard Drives
Registered DIMMs (RDIMMs)
HP 2GB 2Rx8 PC3-10600R-9 Kit
HP 4GB 2Rx4 PC3-10600R-9 Kit
HP 4GB 4Rx8 PC3-8500R-7 LP Kit
HP 4GB 1Rx4 PC3-10600R-9 Kit
HP 4GB 1Rx4 PC3L-10600R-9 Kit
NOTE: Low Voltage DIMMs can only be used with Intel® Xeon® processor 5600
series processors.
HP 8GB 2Rx4 PC3-8500R-7 Kit
HP 8GB 2Rx4 PC3-10600R-9 Kit
HP 8GB 2Rx4 PC3L-10600R-9 Kit
NOTE: Low Voltage DIMMs can only be used with Intel® Xeon® processor 5600
series processors.
HP 16GB 4Rx4 PC3-8500R-7 Kit
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: Maximum 12 DIMMs supported per node.
HP 1GB 1Rx8 PC3-10600E-9 Kit
HP 2GB 2Rx8 PC3-10600E-9 Kit
HP 4GB 2Rx8 PC3-10600E-9 Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
memory configuration rules and guidelines, please use the Online DDR3 Memory
Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information on
ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient.
NOTE: There is a maximum support limitation of 8 ranks per memory channel
(maximum of 2 quad rank DIMMs per channel)
NOTE: PC3L is a low voltage memory.
NOTE: Transfer rates of drives are dependent on the maximum transfer rate
supported by the HBA or Controller. Refer to the HBA or Controller technical
specifications for details.
NOTE: Hard drives have either a one year or three year warranty.
NOTE: The hard drives use a quick release carrier.
NOTE: One 2 Drive SFF Drive Cage (582657-B21) is required when installing 2 SFF
drives
NOTE: When adding SAS one of the following cable kits needs to be ordered
depending on which SAS controller installing - HP P212 SAS 4HDD Cable Kit
574001-B21 or HP P410 SAS 4HDD Cable Kit 583997-B21.
SAS Enterprise (ENT) Drives - with quick-release (QR) carrier
HP 600GB 6G SAS 15K 3.5in QR DP ENT HDD
HP 300GB 6G SAS 15K 3.5in QR DP ENT HDD
HP 300GB 6G SAS 10K 2.5in QR DP ENT HDD
SATA Entry (ETY) Drives - with quick-release (QR) carrier
HP 160GB 3G SATA 7.2K 3.5in QR ETY HDD
SATA Midline (MDL) Drives - with quick-release (QR) carrier
DA - 13385
Worldwide — Version 8 — April 9, 2010
500656-B21
500658-B21
500660-B21
593339-B21
604504-B21
516423-B21
500662-B21
604506-B21
500666-B21
500668-B21
500670-B21
500672-B21
574758-B21
585980-B21
574879-B21
574021-B21
Page 21
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Core Options
HP 2TB 3G SATA 7.2K 3.5in QR MDL HDD
HP 1TB 3G SATA 7.2K 3.5in QR MDL HDD
HP 500GB 3G SATA 7.2K 3.5in QR MDL HDD
HP 500GB 3G SATA 7.2K 2.5in QR MDL HDD
HP 160GB 3G SATA 7.2K 2.5in QR MDL HDD
NOTE: HP P212 SAS 4HDD Cable Kit (574001-B21) is needed when adding more
than two 2.5" hard drives.
SATA Midline (MDL) Solid State Drives - with quick-release (QR) carrier
HP 120GB 3G SATA 2.5in QR MDL SSD
HP 60GB 3G SATA 2.5in QR MDL SSD
HP Networking
Gigabit Ethernet Adapters
HP NC112T PCIe Gigabit Server Adapter
HP NC360T PCI Express Dual Port Gigabit Server Adapter
HP NC364T PCI Express Quad Port Gigabit Server Adapter
HP NC373F PCI Express Multifunction Gigabit Server Adapter
HP NC373T PCI Express Multifunction Gigabit Server Adapter
HP NC375T PCI Express Quad Port Gigabit Server Adapter
HP NC382T PCI Express Dual Port Multifunction Gigabit Server Adapter
10 Gigabit Ethernet Adapters
HP NC522SFP Dual Port 10GbE Server Adapter
NOTE: A minimum of two Gigabtyes (2GB) of server memory is required for each
NC522SFP adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and
cables for fiber-optic environments must be purchased separately.
HP NC550SFP Dual Port 10GbE Server Adapter
NOTE: A minimum of two Gigabytes (2 GB) of server memory is required per each
NC550SFP adapter.
NOTE: Direct Attach Cable (DAC) for copper environments or fiber transceivers and
cables for fiber-optic environments must be purchased separately.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information: www.hp.com/go/ProLiantNICs..
DA - 13385
Worldwide — Version 8 — April 9, 2010
574755-B21
574025-B21
574023-B21
574953-B21
574893-B21
586587-B21
586585-B21
503746-B21
412648-B21
435508-B21
394793-B21
394791-B21
538696-B21
458492-B21
468332-B21
581201-B21
Page 22
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Core Options
HP Infiniband
HP IB 4X DDR Conn-X PCI-e G2 Dual Port HCA
HP IB 4X DDR PCI-e DUAL PORT HCA
HP IB 4X QDR CX-2 PCI-e G2 Dual Port HCA
HP IB 4X DDR CX-2 PCI-e G2 Dual Port HCA
HP IB 4X QDR PCI-e G2 Dual Port HCA
HP 10 GbE PCI-e G2 Dual Port Adapter
QLogic IB 4X QDR PCI-e G2 Dual-port HCA
NOTE: Please see the QuickSpecs for additional information:
http://h18000.www1.hp.com/products/quickspecs/13078_div/13078_div.html
483514-B21
448397-B21
592520-B21
592521-B21
517721-B21
516937-B21
583211-B21
HP I/O Expansion
Options
HP I/O Riser x16 SL160/170 G6 KIT
HP PCI-E x4 Riser SL160z G6 Kit
574806-B21
571408-B21
HP Power Supplies
CAUTION: In ProLiant Servers that have more than one power slot (bay), only same
size power supplies are recommended. If non-matched power supplies are inserted
you will get errors and operation will fail.
HP 460W CS HE Gold Power Supply
HP 750W CS HE Gold Power Supply
HP 1200W CS HE Silver Power Supply
NOTE: Option Kits contain optional power supply, an IEC power cable and PDU IEC
cables.
DA - 13385
Worldwide — Version 8 — April 9, 2010
503296-B21
512327-B21
500172-B21
Page 23
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Additional Options
HP Entry-Level Server
Management
HP LO100i Advanced Pack, No Media 1-Server License including 1 year of 24x7
Technical Support and Updates
NOTE: For additional information, please see the Lights-Out 100i QuickSpecs at:
www.hp.com/go/lo100.
HP Insight Software
HP Insight Control for Linux
HP Insight Control for Linux, 1-server license, including one year of 24x7 Technical
Support and Updates, Electronic
HP Insight Control for Linux, No Media, 1-Server license, including one year of 24x7
Technical Support and Updates
HP Rail Options
HP Security - TPM
530521-B21
TC213AAE
TC209A
HP Insight Control for Linux, Media pack (DVD) - No licenses included
NOTE: Media pack DVD contains the ISO image for HP Insight Control for Linux, HP
Systems Insight Manager, HP Insight Control power management, HP Insight Control
virtual machine management, and an integrated installer. Servers must be acquired
separately.
NOTE: Licenses ship without media. The Media Kit for Insight Control for Linux can
be ordered separately, or can be downloaded at: http://www.hp.com/go/ic-linux
(click on Download button).
NOTE: Electronic software is available in all countries except China and Japan.
Customers in China and Japan should order the physical equivalent.
NOTE: Electronic and Flexible-Quantity licenses can be used to purchase multiple
licenses with a single set of activation keys.
NOTE: For additional License Kits, including electronic licensing options, please see
the QuickSpecs at:
http://h18000.www1.hp.com/products/quickspecs/13019_div/13019_div.html
TC208A
HP ProLiant z6000 G6 2U rail kit
NOTE: 2U rail kit used for HP or 3rd part racks - allows addition of one z6000
chassis at a time.
HP ProLiant z6000 G6 10U Bulk rail kit
NOTE: 10U rail kit used for HP racks ONLY - allows addition of five z6000 chassis at
a time.
HP SL Universal Switch Rail Kit
NOTE: This kit allows you to install HP or 3rd party switch in the same rack as
SL6000.
HP ProCurve 6600 rail kit
NOTE: This rail kit is used to mount the ProCurve 6600 switch recessed with the
z6000 chassis.
CISCO 4948 rail kit
NOTE: This rail kit is used to mount the CISCO 4948 switch recessed with the z6000
chassis.
570226-B21
HP Trusted Platform Module Option Kit
488069-B21
DA - 13385
Worldwide — Version 8 — April 9, 2010
570227-B21
592774-B21
538062-B21
574549-B21
Page 24
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Additional Options
HP Storage Controllers
SAS Controllers
Smart Array P212 Controller
NOTE: HP P212 SAS 4HDD Cable Kit is required when adding SAS hard drives using
the P212 controller (574001-B21)
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256 MB Controller
Smart Array P410 Controller
NOTE: HP P410 SAS 4HDD Cable Kit is required when adding SAS hard drives using
the P410 controller (583997-B21)
HP Smart Array P410/256MB Controller
HP Smart Array P410/512MB with BBWC
HP Smart Array P410/512MB with FBWC
HP Smart Array P410/1G with FBWC
Smart Array P411 Controller
HP Smart Array P411/256MB Controller
HP Smart Array P411/512MB Battery Backed Write Cache
HP Smart Array P411/512MB Flash Backed Write Cache
HP Smart Array P411/1G Flash Backed Write Cache
Optional Upgrades
NOTE: HP z6000 BBWC HDWR KIT is required when adding BBWC (582653-B21)
256 MB Cache Module
NOTE: Supported on HP Smart Array P212 Controller only.
512MB BBWC
NOTE: Supported on HP Smart Array P410 Controller and HP Smart Array P411
Controller only.
Battery Kit upgrade
NOTE: To enable BBWC on the 256MB cache.
NOTE: Supported on HP Smart Array P212 Controller, HP Smart Array P410
Controller, and HP Smart Array P411 Controller only.
512MB Flash Backed Write Cache
1G Flash Backed Write Cache
NOTE: Please see the following QuickSpecs for Technical Specifications and
additional information:
http://h18000.www1.hp.com/products/quickspecs/13203_div/13203_div.html
(Smart Array P212 Controller)
http://h18000.www1.hp.com/products/quickspecs/13201_div/13201_div.html
(Smart Array P410 Controller)
http://h18000.www1.hp.com/products/quickspecs/13202_div/13202_div.html
(Smart Array P411 Controller)
HP StorageWorks
Options
StorageWorks SCSI HBA
HP U320e SCSI Host Bus Adapter
NOTE: Recommended HBA for MSL SCSI Tape Library connect.
DA - 13385
Worldwide — Version 8 — April 9, 2010
462828-B21
462834-B21
462862-B21
462864-B21
578230-B21
572532-B21
462830-B21
462832-B21
578229-B21
572531-B21
462968-B21
462967-B21
462969-B21
534916-B21
534562-B21
AH627A
Page 25
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Additional Options
HP Modular Smart Array Disk Enclosures
HP StorageWorks D2700 Disk Enclosure
NOTE: Please see the following QuickSpecs for Technical Specifications and
additional information:
http://h18000.www1.hp.com/products/quickspecs/13404_div/13404_div.html
(Worldwide)
HP Rack Series
HP Rack 10000 G2 Series (Carbon/Graphite Metallic)
10642 G2 (42U) Rack Cabinet - Pallet
10642 G2 (42U) Rack Cabinet - Shock Pallet
NOTE: It is mandatory to use a shock pallet when shipping racks with equipment
installed.
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/12402_div/12402_div.html
(Worldwide)
NOTE: For additional information regarding Rack Cabinets, please see the following
URL: http://www.hp.com/go/rackandpower.
HP USB and SD options
HP USB 2-Button Optical Scroll Mouse (Carbonite/Silver)
HP USB 04 Standard Keyboard
HP Care Pack Services
HP 1y 4h 13x5 SL6000 HW Support
HP 1y 4h 24x7 SL6000 HW Support
HP 1y 6h 24x7 CTR SL6000 HW Supp
HP 3y Nbd SL6000 HW Support
HP 3y Nbd w/DMR SL6000 HW Supp
HP 3y 4h 13x5 SL6000 HW Support
HP 3y 4h13x5 w/DMR SL6000 HW Supp
HP 3y 4h 24x7 SL6000 HW Support
HP 3y 4h24x7 w/DMR SL6000 HW Supp
HP 3y 6h 24x7 CTR SL6000 HW Supp
HP3y 6h24x7 CTRw/DMR SL6000 HW Supp
HP 4y Nbd SL6000 HW Support
HP 4y Nbd w/DMR SL6000 HW Supp
HP 4y 4h 13x5 SL6000 HW Support
HP 4y 4h13x5 w/DMR SL6000 HW Supp
HP 4y 4h 24x7 SL6000 HW Support
HP 4y 4h24x7 w/DMR SL6000 HW Supp
HP 4y 6h 24x7 CTR SL6000 HW Supp
HP4y 6h24x7 CTRw/DMR SL6000 HW Supp
HP 5y Nbd SL6000 HW Support
DA - 13385
Worldwide — Version 8 — April 9, 2010
AJ941A
AF001A
AF002A
DC172B
DT528A#ABA
UR258E
UR259E
UR260E
UR261E
UR262E
UR263E
UR264E
UR265E
UR266E
UR267E
UR268E
UR269E
UR270E
UR271E
UR272E
UR273E
UR274E
UR275E
UR276E
UR277E
Page 26
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Additional Options
HP 5y Nbd w/DMR SL6000 HW Supp
HP 5y 4h 13x5 SL6000 HW Support
HP 5y 4h13x5 w/DMR SL6000 HW Supp
HP 5y 4h 24x7 SL6000 HW Support
HP 5y 4h24x7 w/DMR SL6000 HW Supp
HP 5y 6h 24x7 CTR SL6000 HW Supp
HP5y 6h24x7 CTRw/DMR SL6000 HW Supp
HP 3y 24x7 24h CTR SL6000 HW Supp
HP 3y24x7 24hCTRwDMR SL6000 HW Supp
HP 4y 24x7 24h CTR SL6000 HW Supp
UR278E
UR279E
UR280E
UR281E
UR282E
UR283E
UR284E
UR288E
UR289E
UR290E
HP 4y24x7 24hCTRwDMR SL6000 HW Supp
HP 5y 24x7 24h CTR SL6000 HW Supp
HP 5y24x7 24hCTRwDMR SL6000 HW Supp
HP Install SL6000 Service
HP Startup SL6000 Service
HP Install nonStdHrs SL6000 SVC
HP LO100i Advanced Pack 3 year 24x7 Software Support
HP 3y 4h 24x7 ProLiant DL14x/16x HW Supp
HP 3y Nbd ProLiant DL14x/16x HW Supp
HP Install ProLiant DL14x/16x Service
NOTE: For more information, customer/resellers can contact:
http://www.hp.com/services/carepack.
UR291E
UR292E
UR293E
UR285E
UR286E
UR287E
UM748E
U9510E
U9508E
U9520E
DA - 13385
Worldwide — Version 8 — April 9, 2010
Page 27
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Memory
HP ProLiant SL160z G6 (all models)
NOTE: Memory configurations listed do not apply to "Factory Integrated Models".
NOTE: Charts do not represent all possible memory configurations.
DDR3 memory population guidelines
For detailed memory configuration rules and guidelines, please use the Online DDR3 Memory Configuration Tool:
www.hp.com/go/ddr3memory-configurator
Some DIMM installation guidelines are summarized below:
For servers with eighteen (18) memory slots:
There are three (3) channels per processor; six (6) channels per server
There are three (3) DIMM slots for each memory channel; eighteen (18) total slots
Memory channel 1 consists of the three (3) DIMMs that are closest to the processor
Memory channel 3 consists of the three (3) DIMMs that are furthest from the processor
DIMM slots that are white should be populated first
Do not mix Unbuffered memory (UDIMMs) with Registered memory (RDIMMs)
Do not install DIMMs if the corresponding processor is not installed
If only one processor is installed in a 2CPU system, only half of the DIMM slots are available
To maximize performance, balance the total memory capacity between all installed processors
It is not required, but it is recommended to load the channels similarly if possible
If any Quad rank DIMMs are installed, all channels are limited to only 2 DIMMs per channel.
You can only install two quad-rank DIMMs per channel
You can only install two UDIMMs per channel; if available, the third slot in the channel must remain empty
Populate DIMMs from heaviest load (quad-rank) to lightest load (single-rank) within a channel
Heaviest load (DIMM with most ranks) within a channel goes furthest from the chipset
For memory mirroring mode, channel 3 must be unpopulated. Channels 1 and 2 are populated identically
For lock-step mode, channel 3 must be unpopulated. DIMMs in channels 1 and 2 will be installed in pairs. The paired slots
will be 1,4; 2,5; 3;6 on a 3DPC system or 1,4; 2,5; on a 2DPC system
If mixing DIMM voltage is a requirement, please note that the DIMMs will run at 1.5V since all 1.35V are capable of supporting
1.5V operations
DA - 13385
Worldwide — Version 8 — April 9, 2010
Page 28
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Memory
DIMM slot/capacity/populated speed table
DIMM Type
Single
DIMM Rank Rank (1R)
DIMM
4GB
Capacity
DIMM
Native
1333
Speed
(MHz)
Registered DIMMs (RDIMMs)
Dual Rank (2R)
Quad Rank (4R)
Unbuffered with ECC DIMMs
(UDIMMs)
Single
Rank (1R)
Dual Rank (2R)
2GB
4GB
8GB
8GB
4GB
16GB
1GB
2GB
4GB
1333
1333
1066
1066
1066
1066
1333
1333
1333
18
18
18
12
12
12
12
12
72
144
144
48
192
12
24
48
1066
1066
1333
1333
1333
800
800
1333
1333
1333*
N/A
N/A
N/A
N/A
N/A
SLOTS THAT CAN BE POPULATED
18 slot
18
18
servers
MAXIMUM CAPACITY (GB)
18 slot
72
36
servers
POPULATED DIMM SPEED (MHz)
1 DIMM
Per
1333
1333
1333
1066
1333
Channel
2 DIMM
Per
1333*
1333*
1333*
1066
1333*
Channel
3 DIMM
Per
800
800
800
800
800
Channel
* Supported at 1333 via setting in ROM based setup utility (RBSU)
NOTES:
PC3-10600 DIMMs have a maximum speed of 1333MHz. PC3-8500 DIMMs have a maximum speed of 1066MHz
Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities
If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system - even if the
slower DIMM is on the other processor
If you install 1x 1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in channel 2, the maximum speed will be 1066MHz If
you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the other
channels, the maximum speed will be 1066MHz
If you install 3DPC in one channel (if applicable) and 1DPC in all other channels, you run at 800MHz
Maximum memory speed will also depend on the processor installed
References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc.
DIMM slot and configuration diagrams
Basic memory slot & population diagram
Population order; start with "A" first, "B" second, "C" third, etc.
DA - 13385
Worldwide — Version 8 — April 9, 2010
Page 29
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Memory
18 DIMM SLOTS (9 per CPU node)
Chnl 1
slot #
1
2
3
CPU1
population order
G
D
A
slot #
1
2
3
CPU2
population order
G
D
A
Chnl 1
Chnl 2
4
5
6
H
E
B
4
5
6
H
E
B
Chnl 2
Chnl 3
7
8
9
I
F
C
7
8
9
I
F
C
Chnl 3
Standard memory configuration (1 CPU model)
6GB, consisting of three (3) 2GB dual-rank PC3-10600E UDIMMs
Chnl 1
slot #
1
2
3
CPU1
population order
G; empty
D; empty
A; 2GB DIMM
slot #
1
2
3
CPU2
population order
G; empty
D; empty
A; empty
Chnl 1
Chnl 2
4
5
6
H; empty
E; empty
B; 2GB DIMM
4
5
6
H; empty
E; empty
B; empty
Chnl 2
Chnl 3
7
8
9
I; empty
F; empty
C; 2GB DIMM
7
8
9
I; empty
F; empty
C; empty
Chnl 3
Standard memory plus optional memory (1 CPU model)
12GB, consisting of three (3) 2GB UDIMMs plus three (3) 2GB UDIMMs
3 x 2GB dual-rank PC3-10600 UDIMMs
3 x 2GB dual-rank PC3-10600 UDIMMs
DA - 13385
Worldwide — Version 8 — April 9, 2010
Page 30
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Memory
Chnl 1
slot #
1
2
3
CPU1
population order
G; empty
D; 2GB DIMM
A; 2GB DIMM
slot #
1
2
3
CPU2
population order
G; empty
D; empty
A; empty
Chnl 1
Chnl 2
4
5
6
H; empty
E; 2GB DIMM
B; 2GB DIMM
4
5
6
H; empty
E; empty
B; empty
Chnl 2
Chnl 3
7
8
9
I; empty
F; 2GB DIMM
C; 2GB DIMM
7
8
9
I; empty
F; empty
C; empty
Chnl 3
Standard memory replaced with optional memory (1 CPU model)
RDIMM maximum configuration
96GB, consisting of six (6) 16GB dual-rank PC3-8500 RDIMMs
Chnl 1
slot #
1
2
3
CPU1
population order
G; 16GB DIMM
D; 16GB DIMM
A; empty
slot #
1
2
3
CPU2
population order
G; empty
D; empty
A; empty
Chnl 1
Chnl 2
4
5
6
H; 16GB DIMM
E; 16GB DIMM
B; empty
4
5
6
H; empty
E; empty
B; empty
Chnl 2
Chnl 3
7
8
9
I; 16GB DIMM
F; 16GB DIMM
C; empty
7
8
9
I; empty
F; empty
C; empty
Chnl 3
UDIMM maximum configuration (1 CPU model)
24GB, consisting of six (6) 4GB dual-rank PC3-10600 UDIMMs
DA - 13385
Worldwide — Version 8 — April 9, 2010
Page 31
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Memory
Chnl 1
slot #
1
2
3
CPU1
population order
G; empty
D; 4GB DIMM
A; 4GB DIMM
slot #
1
2
3
CPU2
population order
G; empty
D; empty
A; empty
Chnl 1
Chnl 2
4
5
6
H; empty
E; 4GB DIMM
B; 4GB DIMM
4
5
6
H; empty
E; empty
B; empty
Chnl 2
Chnl 3
7
8
9
I; empty
F; 4GB DIMM
C; 4GB DIMM
7
8
9
I; empty
F; empty
C; empty
Chnl 3
Standard memory replaced with optional memory (2 CPU model)
RDIMM maximum configuration
192GB, consisting of twelve (12) 16GB PC3-8500 RDIMMs
Chnl 1
slot #
1
2
3
CPU1
population order
G; 16GB DIMM
D; 16GB DIMM
A; empty
slot #
1
2
3
CPU2
population order
G; 16GB DIMM
D; 16GB DIMM
A; empty
Chnl 1
Chnl 2
4
5
6
H; 16GB DIMM
E; 16GB DIMM
B; empty
4
5
6
H; 16GB DIMM
E; 16GB DIMM
B; empty
Chnl 2
Chnl 3
7
8
9
I; 16GB DIMM
F; 16GB DIMM
C; empty
7
8
9
I; 16GB DIMM
F; 16GB DIMM
C; empty
Chnl 3
UDIMM maximum configuration (2 CPU model)
48GB, consisting of twelve (12) 2GB dual-rank PC3-10600 UDIMMs
DA - 13385
Worldwide — Version 8 — April 9, 2010
Page 32
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Memory
Chnl 1
slot #
1
2
3
CPU1
population order
G; empty
D; 4GB DIMM
A; 4GB DIMM
slot #
1
2
3
CPU2
population order
G; empty
D; 4GB DIMM
A; 4GB DIMM
Chnl 1
Chnl 2
4
5
6
H; empty
E; 4GB DIMM
B; 4GB DIMM
4
5
6
H; empty
E; 4GB DIMM
B; 4GB DIMM
Chnl 2
Chnl 3
7
8
9
I; empty
F; 4GB DIMM
C; 4GB DIMM
7
8
9
I; empty
F; 4GB DIMM
C; 4GB DIMM
Chnl 3
NOTE: Capacity references are rounded to the common Gigabyte values.
1GB = 1024MB
2GB = 2048MB
4GB = 4096MB
8GB = 8192MB
16GB = 16384MB
Following are memory options available from HP:
Registered DIMMs (RDIMMs)
HP Memory
HP 2GB 2Rx8 PC3-10600R-9 Kit
HP 4GB 2Rx4 PC3-10600R-9 Kit
HP 4GB 4Rx8 PC3-8500R-7 LP Kit
HP 4GB 1Rx4 PC3-10600R-9 Kit
HP 4GB 1Rx4 PC3L-10600R-9 Kit
NOTE: Low Voltage DIMMs can only be used with Intel® Xeon® processor 5600
series processors.
HP 8GB 2Rx4 PC3-8500R-7 Kit
HP 8GB 2Rx4 PC3-10600R-9 Kit
HP 8GB 2Rx4 PC3L-10600R-9 Kit
NOTE: Low Voltage DIMMs can only be used with Intel® Xeon® processor 5600
series processors.
HP 16GB 4Rx4 PC3-8500R-7 Kit
Unbuffered with ECC DIMMs (UDIMMs)
NOTE: Maximum 12 DIMMs supported per node.
HP 1GB 1Rx8 PC3-10600E-9 Kit
HP 2GB 2Rx8 PC3-10600E-9 Kit
HP 4GB 2Rx8 PC3-10600E-9 Kit
NOTE: All DDR3 memory option kits consist of one DIMM per kit. For detailed
DA - 13385
Worldwide — Version 8 — April 9, 2010
500656-B21
500658-B21
500660-B21
593339-B21
604504-B21
516423-B21
500662-B21
604506-B21
500666-B21
500668-B21
500670-B21
500672-B21
Page 33
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Memory
memory configuration rules and guidelines, please use the Online DDR3 Memory
Configuration Tool: www.hp.com/go/ddr3memory-configurator.
NOTE: Kits described as LP include Low Power DIMMs. For more information on
ProLiant Energy Efficient Features, see: www.hp.com/go/proliant-energy-efficient.
NOTE: There is a maximum support limitation of 8 ranks per memory channel
(maximum of 2 quad rank DIMMs per channel)
NOTE: PC3L is a low voltage memory
DA - 13385
Worldwide — Version 8 — April 9, 2010
Page 34
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Storage
1-2
Non-hot plug SATA hard drive bays - Using quick
release carrier
Drive Support
Hard Drives
NOTE: Transfer rates of drives are dependent on the maximum transfer rate supported by the HBA or Controller. Refer to the HBA
or Controller technical specifications for details.
NOTE: Hard drives have either a one year or three year warranty.
SATA Entry (ETY) Drives - with quick release carrier
Quantity
Position
Supported
Supported
Controller
160GB 3G SATA 7.2K
Up to 2
1-2
HP Embedded SATA RAID Controller
3.5in
NOTE: Transfer rate: 3 Gb/s SATA
SATA Midline (MDL) Drives - with quick release carrier
Quantity
Position
Supported
Supported
2TB 3G SATA 7.2K 3.5in
Up to 2
1-2
1TB 3G SATA 7.2K 3.5in
500GB 3G SATA 7.2K
3.5in
500GB 3G SATA 7.2K
Up to 4
1-4
2.5in
160GB 3G SATA 7.2K
2.5in
SAS Enterprise (ENT) Drives - with quick-release carrier
Quantity
Position
Supported
Supported
600GB 6G SAS 15K 3.5in
Up to 2
1-2
300GB 6G SAS 15K 3.5in
DA - 13385
Controller
HP Embedded SATA RAID Controller
NOTE: Transfer rate: 3 Gb/s SATA
HP Embedded SATA RAID Controller
NOTE: Transfer rate: 3 Gb/s SATA
Controller
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256 MB Controller
Worldwide — Version 8 — April 9, 2010
Page 35
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Storage
300GB 6G SAS 10K 2.5in
Up to 4
1-4
NOTE: HP P212 SAS 4HDD Cable Kit is required when adding
SAS hard drives using the P212 controller.
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
NOTE: HP P410 SAS 4HDD Cable Kit is required when adding
SAS hard drives using the P410 controller.
HP Smart Array P212/Zero Memory Controller
HP Smart Array P212/256 MB Controller
NOTE: HP P212 SAS 4HDD Cable Kit is required when adding
SAS hard drives using the P212 controller.
HP Smart Array P410/256 MB Controller
HP Smart Array P410/512 MB BBWC Controller
NOTE: HP P410 SAS 4HDD Cable Kit is required when adding
SAS hard drives using the P410 controller.
SATA Midline (MDL) Solid State Drives - with quick-release carrier
Quantity
Position
Supported
Supported
Controller
120GB 3G SATA 2.5in
Up to 4
1-4
HP Embedded SATA RAID Controller
60GB 3G SATA 2.5in
NOTE: Transfer rate: 3 Gb/s SATA
External Storage
D2700 Disk Enclosure
Quantity
Supported
Up to 2
Up to 4
Position
Supported
External
External
DA - 13385
Controller
HP Smart Array P212/256 MB Controller
HP Smart Array P411/256 MB Controller
HP Smart Array P411/512 MB Controller
Worldwide — Version 8 — April 9, 2010
Page 36
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Power Specifications
HP 460W Power Supply
Part Number - AC 460W PSU
Input Voltage Range (Vrms)
Frequency Range (Nominal) (Hz)
Nominal Input Voltage (Vrms)
Maximum Rated Output Wattage
Nominal Input Current (A rms)
Max Rated Input Wattage Rating
(Watts)
Max. Rated VA (Volt-Amp)
Efficiency (%) at Max. Rated
Output Wattage
Power Factor
Leakage Current (mA)
Max. Inrush Current (A peak)
Max. Inrush Current duration (mS)
Maximum British Thermal Unit
Rating (BTU-Hr)
503296-B21
100 to 240
50/60
100
460
5.5
526
120
460
4.5
520
200
460
2.6
505
208
460
2.5
505
220
460
2.4
503
230
460
2.3
503
240
460
2.2
503
548
542
527
527
524
524
524
87.5
88.5
91
91
91.5
91.5
91.5
0.97
0.42
30
20
1794
0.97
0.50
30
20
1773
0.97
0.83
30
20
1725
0.97
0.87
30
20
1725
0.97
0.92
30
20
1715
0.97
0.96
30
20
1715
0.97
1.00
30
20
1715
120
750
7.4
847
200
750
4.3
824
208
750
4.1
825
220
750
3.9
820
230
750
3.7
820
240
750
3.6
820
884
88.5
859
91
859
91
854
91.5
854
91.5
854
91.5
0.97
0.50
30
20
2892
0.97
0.83
30
20
2812
0.97
0.87
30
20
2812
0.97
0.92
30
20
2797
0.97
0.96
30
20
2797
0.97
1.00
30
20
2797
HP 750W Power Supply
Part Number - AC 750W PSU
512327-B21
100 to 240
Input Voltage Range (Vrms)
Frequency Range (Nominal) (Hz) 50/60
100
Nominal Input Voltage (Vrms)
Maximum Rated Output Wattage
750
Nominal Input Current (A rms)
8.9
Max Rated Input Wattage Rating
857
(Watts)
Max. Rated VA (Volt-Amp)
894
Efficiency (%) at Max. Rated
87.5
Output Wattage
Power Factor
0.97
Leakage Current (mA)
0.42
Max. Inrush Current (A peak)
30
Max. Inrush Current duration (mS)
20
Maximum British Thermal Unit
2925
Rating (BTU-Hr)
DA - 13385
Worldwide — Version 8 — April 9, 2010
Page 37
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Power Specifications
HP 1200W Power Supply
Part Number - AC
500172-B21
Operational Input Voltage Range 100 to 240
(Vrms)
Frequency Range (Nominal) (Hz) 50/60
100
Nominal Input Voltage (Vrms)
Maximum Rated Output Wattage
800
Nominal Input Current (A rms)
9.7
Max Rated Input Wattage Rating
930
(Watts)
Max. Rated VA (Volt-Amp)
970
Efficiency (%) at Max. Rated
Output Wattage
Power Factor
Leakage Current (mA)
Max. Inrush Current (A peak)
Max. Inrush Current duration (mS)
Maximum British Thermal Unit
Rating (BTU-Hr)
120
900
9.0
1034
200
1200
7.0
1348
208
1200
6.8
1348
220
1200
6.4
1348
230
1200
9.1
1348
240
1200
5.9
1348
1079
1406
1406
1406
1406
1406
86
87
89
89
89
89
89
0.97
0.42
30
20
3174
0.97
0.50
30
20
3530
0.97
0.83
30
20
4600
0.97
0.87
30
20
4600
0.97
0.92
30
20
4600
0.97
0.96
30
20
4600
0.97
1.00
30
20
4600
To review typical system power ratings use the Active Answers HP Power Advisor which is available via the online tool located at
URL: www.hp.com/go/proliant-energy-efficient or www.hp.com/go/hppoweradvisor
DA - 13385
Worldwide — Version 8 — April 9, 2010
Page 38
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Technical Specifications
System Unit
Dimensions (H x W x D)
(with bezel)
Weight
(approximate)
Input Requirements
(per power supply)
3.46 x 17.64 x 28.1 in (8.79 x 44.80 x 71.37 cm)
Maximum
(all hard drives, power
supplies, and processors
installed)
Rated Line Voltage
Rated Input Current
Rated Input Frequency
BTU Rating
53.7 lb (24.35 kg)
90 to 132 VAC
180 to 264 VAC
5. 8 Amps (at 100 VAC) to 2.9 Amps (at 200
VAC)
47 to 63 Hz
570W (at 100 VAC)
565W (at 200 VAC)
Maximum
-500W 1940 BTU / hr (at 100 VAC), 1920
BTU/hr (at 200 VAC)
460W - 1773 BTU / hr (at 120 VAC), 1715 (at
240 VAC)
750W - 2892 BTU / hr (at 120 VAC), 2797 (at
240 VAC)
Power Specifications
To review typical system power ratings use the HP Power Advisor which is
available via the online tool located at URL: www.hp.com/go/proliantenergy-efficient
Power Supply Output
Rated Steady-State Power 500 Watts (at 100 VAC),
(per power supply)
500 Watts (at 200 VAC)
Maximum Peak Power
500Watts (at 100 VAC),
(See Power Specifications 500 Watts (at 200 VAC)
Tables)
System Inlet Temperature Operating
10° to 35°C (50° to 95°F) at sea level with an
altitude derating of 1.0°C per every 305 m
(1.8°F per every 1000 ft) above sea level to a
maximum of 3050 m (10,000 ft), no direct
sustained sunlight. Maximum rate of change is
10°C/hr (18°F/hr). The upper limit may be
limited by the type and number of options
installed.
System performance may be reduced if operating
with a fan fault or above 30°C (86°F).
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
Relative Humidity
Operating
10 to 90% relative humidity (Rh), 28°C (82.4°F)
(non-condensing)
maximum wet bulb temperature, noncondensing.
Non-operating
-30° to 60°C (-22° to 140°F). Maximum rate of
change is 20°C/hr (36°F/hr).
Altitude
Operating
3050 m (10,000 ft). This value may be limited by
the type and number of options installed.
Maximum allowable altitude change rate is 457
DA - 13385
Rated Input Power
Worldwide — Version 8 — April 9, 2010
Page 39
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Technical Specifications
Acoustic Noise
Emissions Classification
(EMC)
NC362i Integrated Dual
Port Gigabit Server
Adapter
Network Interface
Data Transfer Method
Controller
Network Transfer Rate
Connector
Cable Support
DA - 13385
m/min (1500 ft/min).
Non-operating
9144 m (30,000 ft). Maximum allowable
altitude change rate is 457 m/min (1500 ft/min).
Listed are the declared A-Weighted sound power levels (LWAd) and declared
average bystander position A-Weighted sound pressure levels (LpAm) when
the product is operating in a 23°C ambient environment. Noise emissions
were measured in accordance with ISO 7779 (ECMA 74) and declared in
accordance with ISO 9296 (ECMA 109).
Idle
LWAd
6.86
LpAm
52.36dBA
Operating
LWAd
6.89
LpAm
52.60dBA
FCC Rating
Class A
Normative Standards
CISPR 22; EN55022; EN55024; FCC CFR 47,
Pt 15; ICES-003; CNS13438; GB9254;
K22;K24; EN 61000-3-2; EN 61000-3-3; EN
60950-1; IEC 60950-1
NOTE: Product conformance to cited product specifications is based on
sample (type) testing, evaluation, or assessment. This product or family of
products is eligible to bear the appropriate compliance logos and
statements.
Integrated 10/100/1000BASE-T Transceiver
Combines a triple-speed IEEE 802.3TM - Compliant Media Access
Controller (MAC) with a triple-speed Ethernet transceiver.
Compliant to x1 PCIe Specification
Intel® 82576
10Base-T (Half-Duplex)
10 Mb/s
10Base-T (Full-Duplex)
20 Mb/s
100Base-TX (Half-Duplex) 100 Mb/s
100Base-TX (Full-Duplex) 200 Mb/s
1000Base-TX (Half and
2000Mb/s
Full-Duplex)
RJ-45 connector
Performs all the physical layer functions for 10BASE-T, 100BASE-T, and
1000BASE-T Ethemet on standard Category 5 UTP
Worldwide — Version 8 — April 9, 2010
Page 40
QuickSpecs
HP ProLiant SL160z Generation 6 (G6)
Technical Specifications
Environment-friendly
Products and Approach
End-of-life Management
and Recycling
Hewlett-Packard offers end-of-life HP product return, trade-in, and recycling
programs in many geographic areas. For trade-in information, please go to:
http://www.hp.com/go/green. To recycle your product, please go to:
http://www.hp.com/go/green or contact your nearest HP sales office.
Products returned to HP will be recycled, recovered or disposed of in a
responsible manner.
The EU WEEE directive (2002/95/EC) requires manufacturers to provide
treatment information for each product type for use by treatment facilities.
This information (product disassembly instructions) is posted on the Hewlett
Packard web site at: http://www.hp.com/go/green. These instructions may
be used by recyclers and other WEEE treatment facilities as well as HP OEM
customers who integrate and re-sell HP equipment.
© Copyright 2010 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel, the Intel logo, Xeon and Xeon Inside are
trademarks of Intel Corporation in the U.S. and other countries.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
For hard drives, 1GB = 1 billion bytes. Actual formatted capacity is less.
DA - 13385
Worldwide — Version 8 — April 9, 2010
Page 41