Samsung DVD-V7500K User`s manual

User’s Manual
DVD-V7500K
STANDBY/ON
OPEN/CLOSE
PAL/NTSC
www.samsung.com
Downloaded From Disc-Player.com Samsung Manuals
Getting Started
Safety Instructions
The following illustrations represent precautions.
The lightning bolt is a warning sign alerting you to dangerous voltage inside the product.
DO NOT OPEN THE DVD-VCR. Refer to service personnel.
DO NOT expose the DVD-VCR to extreme temperature
conditions (below 5°C and above 40°C) or to extreme
humidity conditions (less than 10% and more than 75%).
DO NOT expose the DVD-VCR to direct sunlight.
DO NOT expose the DVD-VCR to any liquids.
DO NOT place any objects on the DVD-VCR or remote control.
During a storm and/or lightning, unplug the DVD-VCR from
the mains jack and aerial.
If the remote control is not used for a long period of time,
remove the batteries and store it in a cool, dry place.
THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.
Reverse engineering or disassembling is prohibited.
2 - English
Downloaded From Disc-Player.com Samsung Manuals
Disc Type and Characteristics
Recording Types
Disc Types (Logos)
DVD
Audio
+
Video
AUDIO-CD
Disc Size
Max. Playing Time
Characteristics
12 Cm
Single-sided 240 min.
Double-sided 480 min.
8 Cm
Single-sided 80 min.
Double-sided 160 min.
- DVD contains excellent sound and
video due to Dolby Digital, DTS and
MPEG-2 system.
- Various screen and audio functions
can be easily selected through the onscreen menu.
12 Cm
74 min.
8 Cm
20 min.
12Cm
74 min.
8 Cm
20 min.
Audio
VIDEO-CD
Audio
+
Video
- CD is recorded as a Digital Signal with
better audio quality, less distortion and
less deterioration of audio quality over
time.
- Video with CD sound, VHS quality &
MPEG-1 compression technology.
- DO NOT play CD-ROM, CD-I and DVD-ROM in this player!
(CDGs play audio only, not graphics.)
- It may not play CD-R,CD-RW and DVD-R, -RW, DVD+R, +RW in all cases due to the type of disc or condition of the recording.
- The recorded disc may not run as playback depends on the recording speed.
- Do not run the player with two discs loaded at the same time.
Disc Markings
~
PAL
NTSC
Play Region Number
PAL colour system in Europe, Australia, New Zealand, etc.
NTSC broadcast system in U.S.A, Canada, Korea, Japan, etc.
Dolby Digital disc
STEREO
DIGITAL
SOUND
Stereo disc
Digital Audio disc
DTS disc
Disc contains a Divx software product
Play Region Number
Both the DVD-VCR and the discs are coded by region. These regional codes must match
in order for the disc to play. If the codes do not match, the disc will not be played.
The Region Number for this player is described on the rear panel of the player.
Downloaded From Disc-Player.com Samsung Manuals
English - 3
Getting Started
This DVD-VCR is capable of playing the following types of discs with the corresponding logos:
Settings
Getting Started
Contents
Tuning Your Television for the DVD-VCR . 15
Setting the Date and Time . . . . . . . . . . . . 16
Setting the Menu Language . . . . . . . . . . . 17
Getting
Started
Presetting the Stations Automatically . . . . 17
Presetting the Stations Manually . . . . . . . 18
Safety Instructions . . . . . . . . . . . . . . . . . . 2
Clearing a Preset Station . . . . . . . . . . . . . 20
Disc Type and Characteristics . . . . . . . . . 3
Changing the Preset Station Table . . . . . . 20
Overviews . . . . . . . . . . . . . . . . . . . . . . . . 6
Selecting the RF OUT Sound Mode
(I-B-M-G-K) . . . . . . . . . . . . . . . . . . . . . . . 21
Front View of the DVD-VCR . . . . . . . . . . . . . . . . . 6
Rear View of the DVD-VCR . . . . . . . . . . . . . . . . . 6
Setting the VCR Output Channel . . . . . . . 22
Display Indicators . . . . . . . . . . . . . . . . . . . . . . . . 6
Accessories . . . . . . . . . . . . . . . . . . . . . . . 7
Inserting Batteries in the Remote Control . 7
Tour of the Remote Control . . . . . . . . . . . . . . . . . 8
Connections
VCR
Functions
Selecting the Colour Mode . . . . . . . . . . . 23
NICAM . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Quick Overview . . . . . . . . . . . . . . . . . . . . 9
Connecting DVD-VCR to the TV using the
RF Cable . . . . . . . . . . . . . . . . . . . . . . . . 10
Intelligent Picture Control . . . . . . . . . . . . . 24
G-Code Extend . . . . . . . . . . . . . . . . . . . . 25
Auto Power off . . . . . . . . . . . . . . . . . . . . 25
Connecting DVD-VCR to the TV using the
Audio/Video Cable . . . . . . . . . . . . . . . . . 10
Screen Messages . . . . . . . . . . . . . . . . . . 26
Connecting DVD-VCR to the TV using the
S-Video Cable (DVD Only) . . . . . . . . . . . 11
Repeat Play . . . . . . . . . . . . . . . . . . . . . . 27
Connecting DVD-VCR to the TV using the
Selecting the Recording Speed . . . . . . . . 28
Component Video Cable (DVD Only) . . . . 11
Protecting a Recorded Cassette . . . . . . . 28
Connecting to an AV amplifier with the
digital input jack . . . . . . . . . . . . . . . . . . . 12
Selecting the Cassette Type . . . . . . . . . . 26
S-VHS Play . . . . . . . . . . . . . . . . . . . . . . . 27
Recording a Programme Immediately . . . 29
Connecting External Devices . . . . . . . . . . 13
Recording a Programme with
Automatic Stop . . . . . . . . . . . . . . . . . . . . 29
Copying from DVD to VCR . . . . . . . . . . . 13
Recording from Another VCR or Camcorder . 30
Plug & Auto Setup . . . . . . . . . . . . . . . . . . 14
Using the Assemble Edit Function . . . . . . 30
Using the G-Code Feature . . . . . . . . . . . . 31
Modifying G-Code Programming . . . . . . . 32
Using the Timer Programming Feature . . 33
Checking a Preset Recording . . . . . . . . . 35
Cancelling a Preset Recording . . . . . . . . 35
4 - English
Downloaded From Disc-Player.com Samsung Manuals
Playing
Back
DivX/MPEG4 Playback . . . . . . . . . . . . . . 61
DivX/MPEG4 Special Playback Features . 61
Playing a Cassette . . . . . . . . . . . . . . . . . 36
Selecting the Audio Output Mode . . . . . . . 37
Playing a Cassette in Slow Motion . . . . . . 37
Playing a Sequence Frame by Frame . . . 37
Playing a Sequence at Variable Speeds . 37
DVD
KARAOKE Function
Using the KARAOKE Function (DVD) . . . 62
Key Control (DVD) . . . . . . . . . . . . . . . . . 63
Reserving Song (DVD) . . . . . . . . . . . . . . 63
Vocal Function (DVD) . . . . . . . . . . . . . . . 64
Searching for a Specific Sequence . . . . . 38
Using the Tape Counter . . . . . . . . . . . . . . 40
VCR
KARAOKE Function
Reference
Technical Specifications . . . . . . . . . . . . . . 66
Troubleshooting Guide (VCR) . . . . . . . . . 67
Using the KARAOKE Function (VCR) . . . 40
Troubleshooting Guide (DVD) . . . . . . . . . 68
SCORE Function (VCR) . . . . . . . . . . . . . 41
KARAOKE SEARCH Function (VCR) . . . 41
DVD
Functions
Setting Up the Language Features . . . . . 42
Setting Up the Audio Options . . . . . . . . . . 44
Setting Up the Display Options . . . . . . . . 45
Setting Up the Parental Control . . . . . . . . 46
DivX(R) Registration . . . . . . . . . . . . . . . . 48
Firmware Upgrade . . . . . . . . . . . . . . . . . . 48
Special Playback Features . . . . . . . . . . . 50
Using the Display Function . . . . . . . . . . . 51
Adjusting the Aspect Ratio (EZ View) . . . . 52
Selecting the Subtitle Language . . . . . . . 53
Selecting the Audio Language . . . . . . . . . 53
Changing the Camera Angle . . . . . . . . . . 54
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Marks . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Repeat Chapter/Title . . . . . . . . . . . . . . . . 55
A to B Repeat . . . . . . . . . . . . . . . . . . . . . 56
MP3/WMA Play . . . . . . . . . . . . . . . . . . . . 57
Program & Random Play (CD/MP3/WMA) . . 58
Picture CD Playback . . . . . . . . . . . . . . . . 59
Downloaded From Disc-Player.com Samsung Manuals
English - 5
Getting Started
Adjusting Picture Alignment Manually . . . 36
Getting Started
Overviews
Front View of the DVD-VCR
1
5
1.
2.
3.
4.
5.
6.
7.
8.
9.
6
7
8
2
9
3
10
11
DVD DECK
OPEN/CLOSE BUTTON
VIDEO CASSETE COMPARTMENT
EJECT BUTTON
STANDBY/ON BUTTON
PROGRESSIVE SCAN MODE BUTTON
EZ VIEW BUTTON
COPY BUTTON
RECORD BUTTON
4
12 13
10.
11.
12.
13.
14.
15.
16.
14
15
16
PROGRAMME SELECTION BUTTON
FRONT PANEL DISPLAY
DVD/VCR SELECTION BUTTON
ECHO VOLUME
MIC VOLUME
MIC JACK
PLAY/STILL, STOP, FAST FORWARD SKIP
NEXT, REWIND/SKIP BACK BUTTON
Rear View of the DVD-VCR
1.
2.
3.
4.
5.
ANTENA INPUT
RF OUT TO TV
LINE IN 1 (Audio / Video)
LINE OUT (Audio / Video)
LINE AUDIO OUT (S-VIDEO OR COMPONENT)
6.
7.
8.
9.
1
3
5
2
4
6
7
8
9
DIGITAL AUDIO OUT (COAXIAL)
COMPONENT VIDEO OUT
DIGITAL AUDIO OUT (OPTICAL)
S-VIDEO OUT
Display Indicators
1
2
6 - English
Downloaded From Disc-Player.com Samsung Manuals
3
4
5
6
1. The DVD Deck is active.
2. Disc is loaded.
3. The time, counter position, current deck
status is displayed.
4. VHS tape is inserted.
5. The VCR Deck is active.
6. A Timer Recording is programmed or in
progress.
Accessories
You have just purchased a SAMSUNG DVD-VCR.
Together with your DVD-VCR, you will find the following
accessories in the box.
STANDBY/ON
You must insert or replace the batteries in the remote
control when you:
• Purchase the DVD-VCR
• Find that the remote control is no longer working
correctly
OPEN/CLOSE
Remote Control
Batteries for
Remote Control
Audio & Video
Cable
1
Push the tab in the direction of the arrow to
release the battery compartment cover on the
rear of the remote control.
2
Insert two AAA, RO3 or equivalent batteries,
taking care to respect the polarities:
• + on the battery with + on the remote control
• – on the battery with – on the remote control
Owner’s
Instructions
RF Cable
• Do not mix different battery types
(manganese and alkaline for example).
3
Downloaded From Disc-Player.com Samsung Manuals
Replace the cover by aligning it with the base of
the remote control and pushing it back into
place.
English - 7
Getting Started
Inserting Batteries in
the Remote Control
Tour of the Remote Control
Getting Started
STANDBY/ON
OPEN/CLOSE
1
16
2
17
18
3
4
5
6
7
19
20
21
22
8
23
9
10
24
25
26
11
12
13
14
15
27
28
29
30
1. STANDBY/ON
Used to turn the power on or off.
2. Number Buttons
3. CLEAR
Used to clear a preset TV station.
Used to cancel a preset recording.
Used to cancel a preset mark.
Used to set the tape counter to zero.
Used to resume normal play during repeat play.
4. DVD
Used to operate DVD.
5. VCR
Used to operate VCR.
6. KEYCON ( , )
7. AUDIO
Used to access various audio functions.
8. STOP ( ■ )
Used to stop during playback.
9. SUBTITLE
Used to change the DVD’s subtitle language.
10. MENU
Used to display the on-screen menu.
8 - English
Downloaded From Disc-Player.com Samsung Manuals
11. OK … / † , œ / √
Used to control the cursor in the on-screen menu
and confirm your choice.
12. SPEED
Used to select the recording speed.
13. REC ( ● )
Used to make a recording on cassette.
14. TIMER
Used to activate the timer recording of a
programme.
15. ANGLE
Used to access various camera angles on a DVD.
IPC (Intelligent Picture Control)
Used to adjust the sharpness of the picture.
16. OPEN/CLOSE
Used to open and close the disc and video
cassette tray.
17. SHUTTLE
Used to play a sequence at variable speeds.
18. KARAOKE SEARCH
19. KARAOKE
20. INPUT SEL.
Used to select a external input signal.
21. PROG/TRK ( / )
Used to select a TV programme.
Used to adjust picture alignment manually to
obtain the best possible picture during playback.
22. F.ADV/STEP
Used to advance a sequence frame by frame.
23. PLAY/STILL ( √ll )
Used to play or pause during playback.
24. SEARCH/SKIP (œœ / √√, lœœ / √√l)
Used to search forward or backward through a
disc.
Used to skip the title, chapter, or track.
25. INFO.
Used to display the current setting or disc status.
26. RETURN
Used to return to a previous menu.
27. EZ VIEW
Used to adjust the aspect ratio on a disc.
28. DISC MENU
Used to display a disc menu.
29. MARK
Used to mark a position during playback a disc.
SEARCH
Used to search for a specific sequence.
30. MODE
Used to select the programme or random play.
REPEAT
Used to allow the repeat play a title, chapter,
track, disc or A-B.
Connections
Quick Overview
A Quick overview presented in this guide will give
you enough information to start using the DVD-VCR.
Connecting DVD-VCR to the TV using the
RF Cable
Connecting DVD-VCR to the TV using the
Audio/Video Cable
Connecting DVD-VCR to the TV using the
S-Video Cable (DVD Only)
Connecting DVD-VCR to the TV using the
Component Video Cable (DVD Only)
•
•
•
Quick Overview . . . . . . . . . . . . . . . . . . . . . 9
Connecting DVD-VCR to the TV using the
RF Cable . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting DVD-VCR to the TV using the
Audio/Video Cable
•
•
. . . . . . . . . . . . . . . . . . 10
Connecting DVD-VCR to the TV using the
S-Video Cable (DVD Only) . . . . . . . . . . . . . 11
Connecting External Devices
Connecting DVD-VCR to the TV using the
Component Video Cable (DVD Only) . . . . . 11
•
Connecting to an AV amplifier with the
digital input jack
Connecting to an AV amplifier with the
Copying from DVD to VCR
digital input jack . . . . . . . . . . . . . . . . . . . . 12
•
Connecting External Devices . . . . . . . . . . . . . 13
•
Copying from DVD to VCR . . . . . . . . . . . . . . 13
•
Plug & Auto Setup . . . . . . . . . . . . . . . . . . . 14
Downloaded From Disc-Player.com Samsung Manuals
Plug & Auto Setup
English - 9
Connections
Connecting DVD-VCR to the TV using the RF
Cable
Connecting DVD-VCR
to the TV using the
RF Cable
Connections
To receive television programmes a signal must be
received from one of the following sources:
• An outdoor aerial
• An indoor aerial
• A cable television network
• A satellite receiver
Connecting DVD-VCR
to the TV using the
Audio/Video Cable
You can connect your DVD-VCR to the television
using the Audio/Video cable if the appropriate input
is available on the television. You thus:
• Obtain better quality sound and pictures
• Simplify the setting up procedure of your DVD-VCR
Regardless of the type of connection chosen,
Note
Make sure that both the television and the
Note
DVD-VCR are switched off before
connecting the cables.
1
Remove the aerial or network input cable from
the television.
2
Connect this cable to the 75Ω coaxial jack
marked
on the rear of your DVD-VCR.
3
Plug the RF Cable supplied into
your DVD-VCR.
4
Plug the other end of the RF Cable into the
connector previously used for the aerial on the
television.
TV
you must always connect the RF Cable
supplied. Otherwise, no picture will be visible on
the screen when the DVD-VCR is switched off.
Make sure that both the television and the
DVD-VCR are switched off before connecting
the cables.
1
Connect the RF Cable.
2
Connect one end of the Audio/Video cable to
the Video output and Audio L, R output jack on
the rear of the DVD-VCR.
3
Plug the other end into the appropriate
connector on the television.
the jack on
Aerial
Aerial cable
Aerial
Aerial cable
TV
2
RF cable
3
4
RF cable
10 - English
Downloaded From Disc-Player.com Samsung Manuals
ANT IN
Connecting DVD-VCR to
the TV using the
S-Video Cable (DVD Only)
You will enjoy high quality images. S-Video seperates
the picture element into black and white(Y) and
colour(C) signals to present clearer images than regular
video input mode.
Connect one end of the S-Video cable into the
S-VIDEO output jack on the rear of the DVD-VCR.
2
Plug the other end of the S-Video cable into the
appropriate input connector on the television.
3
Connect one end of the audio cables supplied into
the AUDIO LINE output jacks on the rear of the
DVD-VCR.
• Take care to respect the colour coding of the left
and right channels.
4
Plug the other end of the audio cables into the
appropriate input connectors on the television.
Your TV must support progressive scan input to allow
you to watch component video output.
You will enjoy high quality accurate colour reproduction
images. Component video seperates the picture
element into black and white(Y), blue(Pb), red(Pr) signals
to present most clear and clean images.
1
Connect Component video cables between the
COMPONENT VIDEO OUT jacks on the rear of
the DVD-VCR and COMPONENT VIDEO IN jacks
on the rear of the TV.
2
Connect audio cables between the AUDIO LINE
OUT jacks on the rear of the DVD-VCR and
AUDIO IN jacks on the rear of the TV.
• Take care to respect the colour coding of the left
and right channels.
COMPONENT VIDEO OUT
Use the S-Video connection method only for
Note
the DVD.
2
1
3
COMPONENT INPUT
1
4
COMPONENT VIDEO IN
2
Downloaded From Disc-Player.com Samsung Manuals
English - 11
Connections
1
Connecting DVD-VCR to the
TV using the Component
Video Cable (DVD Only)
❚
Progressive Scan
Connections
If the TV connected supports Progressive Scan, press the
PROGRESSIVE button on the front panel in stop mode.
• The Progressive Scan feature is only available
for DVD. Activate it in DVD Stop mode.
• The message “Press OK to confirm Progressive
scan mode. Otherwise press RETURN.” will be
displayed. If you want Progressive scan mode,
select OK. Make sure that the disc has stopped
completely before changing the mode.
Connecting to an AV
amplifier with the
digital input jack
To take full advantage of the movie theater experience
that DVD offers, you may want to connect your DVDVCR to a complete Surround Sound system, including
an A/V Receiver and six Surround Sound speakers.
If your A/V receiver is equipped with a Dolby Digital
Decoder, you have the option to bypass the DVD-VCR’s
built-in Dolby Digital Decoder. Use the Digital Audio Out
connection below.
To enjoy Dolby Digital or DTS sound, you must set up
the audio settings. (See page 44)
1
• To cancel the progressive scan mode, press the
PROGRESSIVE button in stop mode.
• Make sure that the colour coded connections match.
That is, the Y, Pb and Pr component output jacks of
your DVD -VCR should be connected to the exact
corresponding component input jacks on your TV.
Otherwise, red or blue images will be displayed on
the TV screen.
Connect a Digital Audio coaxial/optical cable from
the Digital Audio Out jacks on the panel of the
DVD-VCR to their corresponding Digital Audio
Input jacks on your A/V Receiver:
If your TV does not have Progressive scan
Note
mode, there will be no signal on the screen.
If you press the PROGRESSIVE button, it
will be changed to Interlace scan mode.
See your TV User’s Manual to find out if
your TV supports Progressive Scan.
If Progressive Scan is supported, follow the
TV User’s instructions regarding
Progressive Scan settings in the TV’s menu
system.
Depending on your TV, the method of
connection may differ from the illustration
above.
What is "Progressive Scan"?
Progressive scan has twice as many
scanning lines as the interlace output
method has. Progressive scanning method
can provide better and clearer picture
quality.
You must connect the player to the
component(s) before using the Progressive
Scan feature.
Use the Component Video connection
method only for the DVD.
12 - English
Downloaded From Disc-Player.com Samsung Manuals
To Digital Audio Input of an A/V
Receiver with a Dolby, MPEG2, DTS,
Digital Decoder
Connecting External
Devices
This allows you to connect your DVD -VCR to other
external devices and view or record their outputs.
• Connecting a VCR, Set-Top Box(STB) or DVD player
to the AUDIO/VIDEO LINE IN 1 jacks.
The DVD-VCR allows you to copy the contents of a
DVD to a VHS tape with a press of the COPY button.
• If the DVD you are attempting to copy is copy
protected, you will not be able to copy the disc. It is
not permitted to copy Macrovision® encoded DVDs.
1
Insert the disc you wish to copy in the DVD deck
and close the drawer.
2
Insert a blank VHS videotape into the VCR deck.
3
Press the COPY button on the DVD-VCR front
panel.
• The DVD will go into Play mode and the VCR
will go into Record mode.
• If the DVD disc menu appears, you may need to
press the PLAY button manually to begin
copying.
4
When the DVD is finished playing, press the VCR
button on the remote control and then press the
STOP button to end the copy.
• You must stop the Copy process manually when
the DVD movie ends or the DVD may replay and
record over and over again.
Copy protected content cannot be recorded.
Note
Downloaded From Disc-Player.com Samsung Manuals
English - 13
Connections
Connecting a VCR or external device to AUDIO/VIDEO
LINE IN 1 jacks of the DVD-VCR.
You can record from connected equipment (VCR, STB
or DVD).
Copying from DVD
to VCR
Plug & Auto Setup
5
Start the auto scanning.
The number of stations automatically stored by
the DVD-VCR depends on the number of
stations that it has found.
Auto Setup
Connections
Your DVD-VCR will automatically set itself up when it
is plugged into the mains for the first time.
TV stations will be stored in memory. The process
takes a few minutes. Your DVD-VCR will then be
ready for use.
Please Wait
10%
√√
RETURN
1
Connect the RF Cable as indicated on page 11.
(Connecting Your DVD-VCR to the TV Using
the RF Cable)
2
Plug the DVD-VCR into the mains.
• “AUTO” in the front panel display flickers.
6
MENU
The current time and date are displayed
automatically.
Clock Set
SETUP
DVD
Time
Date
Year
12 : 00
01 / JAN
/ 2005 SAT
VCR
PROG
FUNC
3
The Language Set menu is displayed.
Press the … or † button, move the selection
bar to select the desired language then press
OK button.
OK
RETURN
MENU
Refer to “Setting the Date and Time” to change
the date and time. (See page 16).
Language Set
Now, you only have to switch the DVD-VCR
√ English
Chinese
Note
on and it is ready for use.
Function for “Plug & Auto Set Up” is fixed
already. So if you want to change this fixed
one, you can change. (refer to “Presetting
the Stations manually” page 18)
OK
4
RETURN
MENU
The System Selection menu is displayed.
Press the …/†,œ/√ buttons to select your
country.
System Selection
System - B/G
System - D/K
System - I
System - B/B
U.S - ANT.
U.S - HRC
U.S - IRC
Japan
OK
14 - English
Downloaded From Disc-Player.com Samsung Manuals
RETURN
MENU
Settings
Tuning Your Television
for the DVD-VCR
To view pictures from your DVD-VCR when a
Audio/Video cable is used, the television must be set
to the audio/video mode (AV).
Switch on the television.
2
Switch on the DVD-VCR by pressing the
/I STANDBY/ON on the front of the DVD-VCR
or STANDBY/ON on the remote control.
3
Select a programme position on the television
to be reserved for use with your DVD-VCR.
4
Insert the video cassette in the DVD-VCR.
Check that the DVD-VCR starts reading the
cassette; if not, press the √II button.
5
Start a scan on your television or set the
television to UHF channel 36.
6
Fine tune the television until the pictures and
sound are obtained clearly.
7
When the picture and sound are perfectly clear,
store this channel at the desired programme
position on the television.
That programme is now reserved for use with
your DVD-VCR.
• Tuning Your Television for the DVD-VCR . . 15
• Setting the Date and Time . . . . . . . . . . . . . . 16
• Setting the Menu Language . . . . . . . . . . . . . 17
• Presetting the Stations Automatically . . . . . 17
• Presetting the Stations Manually . . . . . . . . . 18
• Clearing a Preset Station . . . . . . . . . . . . . . . 20
• Changing the Preset Station Table . . . . . . . . 20
• Selecting the RF OUT Sound Mode (K-B-M-G-I) 21
• Setting the VCR Output Channel . . . . . . . . . 22
Downloaded From Disc-Player.com Samsung Manuals
English - 15
Settings
1
Setting the Date and
Time
Your DVD-VCR contains a 24-hour clock and
calendar used to:
• Automatically stop programme recording
• Preset your DVD-VCR to record a programme
automatically
You must set the date and time when:
• You purchase the DVD-VCR.
• Do not forget to reset the time when you change
clocks from winter to summer time and vice versa.
Settings
1
Press the MENU button, then press the OK or
√ button.
Setup
SETUP
DVD
VCR
Language
: English
√
Install
√
√
User Set
: Off
√
Screen Messages : On
√
Auto Power Off
PROG
√
Clock
FUNC
OK
2
RETURN
MENU
Press the … or † button to select Clock, then
press the OK or √ button.
The Clock Set menu is displayed.
Clock Set
SETUP
DVD
Time
Date
Year
12 : 00
01 / JAN
/ 2005 SAT
VCR
PROG
FUNC
OK
16 - English
RETURN
Downloaded From Disc-Player.com Samsung Manuals
MENU
3
Press the œ or √ button to select the hour,
minutes, day, month, and year.
The selected option is highlighted.
Press the … or † button to set them.
The day of the week is displayed automatically.
Press the OK button.
Clock Set
SETUP
DVD
Time
Date
Year
12 : 00
01 / JAN
/ 2005 SAT
VCR
PROG
FUNC
OK
RETURN
MENU
• You can hold the … or † button to scroll
more quickly through the values.
• Press the MENU button to exit the menu.
Setting the Menu
Language
1
Presetting the Stations
Automatically
Press the MENU button, then press the OK or
√ button.
The Language is highlighted.
Setup
SETUP
DVD
VCR
Language
: English
√
Install
√
√
User Set
: Off
√
Screen Messages : On
√
Auto Power Off
PROG
√
Clock
OK
RETURN
MENU
Your DVD-VCR contains a built-in tuner used to
receive television broadcasts.
You must preset the stations received through the
tuner. This can be done:
• Plug & Auto Set up (refer to page 14)
• Automatically
• Manually (refer to page 18)
You can store up to 80 stations.
1
Press the MENU button, then press the OK or
√ button.
Setup
SETUP
2
Press the OK or √ button again.
The Language Set menu is displayed.
DVD
VCR
Language
√
Install
√
√
User Set
: Off
√
Screen Messages : On
√
Auto Power Off
PROG
Language Set
√ English
FUNC
Chinese
OK
2
OK
√
: English
Clock
RETURN
MENU
RETURN
MENU
Press the … or † button to select Install, then
press the OK or √ button.
The Install menu is displayed.
Install
3
Press the … or † button to select desired
language, then press the OK or √ button.
SETUP
DVD
• Press the MENU button to exit the menu.
VCR
√
Auto Setup
√
Manual Setup
TV System
:G
√
VCR Output CH
:CH36
√
PROG
FUNC
OK
Downloaded From Disc-Player.com Samsung Manuals
RETURN
MENU
English - 17
Settings
FUNC
You do not need to preset the stations if you have
already set them automatically (refer to “Plug & Auto
Set Up” on page 14).
3
Press the … or † button to select Auto Setup,
then press the OK or √ button.
The System Selection menu is displayed.
Press the œ/√, …/† buttons to select your country.
Presetting the Stations
Manually
System Selection
System - B/G
System - D/K
System - I
System - B/B
U.S - ANT.
U.S - HRC
U.S - IRC
Japan
OK
RETURN
You do not need to preset the stations manually if
you have already set them automatically.
1
Press the MENU button, then press the OK or
√ button.
MENU
Setup
4
Press the OK button.
A message is displayed, indicating that any
channels already preset on your DVD-VCR will
be deleted.
SETUP
DVD
VCR
Language
Clock
√
Install
√
√
User Set
: Off
√
Screen Messages : On
√
Auto Power Off
PROG
Settings
Auto Setup
√
: English
FUNC
Your data will be lost
OK
RETURN
MENU
Press OK to continue
MENU to exit
2
OK
5
RETURN
MENU
Press the … or † button to select Install, then
press the OK or √ button.
The Install menu is displayed.
Install
Press the OK button to start the auto scanning.
The message Please Wait is displayed.
SETUP
DVD
Auto Setup
VCR
√
Auto Setup
√
Manual Setup
TV System
:G
√
VCR Output CH
:CH36
√
PROG
Please Wait
10%
FUNC
√√
OK
RETURN
MENU
• The first frequency band is scanned and
stored, then the DVD-VCR searches for the
second station and so on.
When the automatic scanning procedure has
finished, the DVD-VCR switches automatically
to programme 1.
• If you wish to cancel the auto scanning before
the end, press the MENU button.
The number of stations automatically stored
Note
by the DVD-VCR depends on the number
of stations that it has found.
Once the auto scanning procedure has
finished, some stations may have been
stored more than once; select the stations
with the best reception and delete the ones
no longer required (refer to page 20).
18 - English
Downloaded From Disc-Player.com Samsung Manuals
3
RETURN
MENU
Press the … or † button to select Manual
Setup, then press the OK or √ button.
The TV STATION TABLE menu is displayed.
❉ ❉
PR
1
2
3
4
5
TV STATION TABLE ❉ ❉
CH
…† √
DELETE : CLEAR
NAME
SYSTEM
SWAPPING : OK
RETURN
Press the … or † button to select the required
programme number.
Press the √ button to preset the station.
The MANUAL TUNING menu is displayed.
5
Press the œ or √ button to start scanning the
channels.
The frequency band is scanned and the first
station found is displayed.
❉ ❉
MANUAL TUNING ❉ ❉
SYSTEM
PR
CH
MFT
NAME
Press the œ or √ buttons
respectively.
If you...
Then...
Wish to store the
station displayed
• Press OK to store the station.
Do not wish to
store the station
displayed
• Press the … or † buttons until the
CH is selected.
• Press the œ or √ buttons to go on
scanning the frequency band and
display the next station.
9
Repeat this procedure from step 4 onwards,
until all the required stations have been stored.
10
Press the MENU button to exit the menu.
MANUAL TUNING ❉ ❉
SYSTEM
PR
CH
MFT
NAME
…† œ √
7
8
MEMORY : OK
RETURN
If necessary, press the … or † button to select
MFT, then press the œ or √ button to adjust the
picture.
❉ ❉
Move to the next
previous or
character
: B/G
: 1
: --:
: ----
…† œ √
6
To...
Then...
Select a character Press the …, †button until the
in the name
required character is displayed
(letters, numbers or “-” character).
: B/G
: 1
: 021
:
: ----
MEMORY : OK
RETURN
Press the … or † button to select NAME.
The station name is set automatically from the
broadcast signal.
❉ ❉
MANUAL TUNING ❉ ❉
SYSTEM
PR
CH
MFT
NAME
…† œ √
: B/G
: 1
: 021
:
: ----
MEMORY : OK
RETURN
•To change the programme’s name, press the
√ button. The first letter of the name flashes.
Downloaded From Disc-Player.com Samsung Manuals
English - 19
Getting Started
4
Changing the Preset
Station Table
Clearing a Preset
Station
If you have stored a TV station:
• That you do not require
• At the wrong programme position, you can cancel it.
1
Press the MENU button, then press the OK or
√ button.
2
Press the … or † button to select Install, then
press the OK or √ button.
The Install menu is displayed.
You can rearrange the station table and give different
programme numbers to the stations listed according
to your own preferences.
1
Press the MENU button, then press the OK or
√ button.
Setup
SETUP
DVD
VCR
Install
SETUP
DVD
VCR
Auto Setup
√
Manual Setup
√
TV System
:G
√
VCR Output CH
:CH36
√
Language
√
Install
√
√
User Set
: Off
√
Screen Messages : On
√
Auto Power Off
PROG
√
: English
Clock
FUNC
OK
RETURN
MENU
VCR Functions
PROG
FUNC
OK
3
RETURN
MENU
2
Press the … or † button to Select Manual
Setup, then press the OK or √ button.
The TV STATION TABLE menu is displayed.
❉ ❉
PR
1
2
3
4
5
NAME
----
…† √
DELETE : CLEAR
SETUP
DVD
VCR
4
5
Repeat the same procedure from step 4
onwards until all the required stations have
been cleared.
Downloaded From Disc-Player.com Samsung Manuals
√
Manual Setup
TV System
:G
√
VCR Output CH
:CH36
√
FUNC
OK
SWAPPING : OK
RETURN
√
Auto Setup
PROG
SYSTEM
B/G
Press the … or † button to select required
preset TV station.
Press the CLEAR button to delete.
20 - English
Install
TV STATION TABLE ❉ ❉
CH
021
Press the … or † button to select Inst