- No category
advertisement
▼
Scroll to page 2
HURON UNIVERSAL BOWL WITH EVERCLEAN® VITREOUS CHINA BARRIER FREE HURON UNIVERSAL BOWL WITH EVERCLEAN ® •F loor mount rear outlet elongated flushometer toilet with angle back and base • Vitreous china • Space-saving 24-7/8" from wall to front of bowl • 17-1/8" rim height for accessibility •H igh Efficiency, Low Consumption. Operates in the range of 1.28 gpf to 1.6 gpf (4.8 Lpf to 6.0 Lpf) •P ermanent EverClean surface inhibits the growth of stain- and odor-causing bacteria, mold and mildew on the surface • Siphon jet flush action • Fully glazed 2" trapway • 12" x 10" water surface area • 1-1/2" inlet spud • 4 bolt caps ❏ 3312.001 Elongated bowl only, top spud, wall outlet ❏ 3313.001 Elongated bowl only, top spud, wall outlet, with bed pan lugs SEE REVERSE FOR ROUGHING-IN DIMENSIONS Nominal Dimensions: 632 x 349 x 435mm (24-7/8" x 13-3/4" x 17-1/8") Recommended working pressure – between 30 psi at valve when flushing and 80 psi static Fixture only, less seat and flushometer valve Compliance Certifications Meets or Exceeds the Following Specifications: • ASME A112.19.2-2008 / CSA B45.1-08 for Vitreous China Fixtures To Be Specified: ❏ Color: ❏ White ❏ Seat: ❏American Standard #5901.100 Heavy duty open front less cover ❏American Standard #5905.100 Extra heavy duty open front less cover ❏ Flushometer Valve: ❏1.6 gpf: ❏ Sensor-Operated: American Standard Selectronic ® DC Power #6065.161.002 (Top Spud) ❏ Manual: American Standard #6047.161.002 (Top Spud) ❏1.28 gpf: ❏ Sensor-Operated: American Standard Selectronic ® DC Power #6065.121.002 (Top Spud) ❏ Manual: American Standard #6047.121.002 (Top Spud) MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE BUILDING FACILITIES - CHECK LOCAL CODES. When installed so top of seat is 432 to 483mm (17" to 19") from the finished floor. © 2015 AS America Inc. M99 spec_3312-3313_001_HuronUnivBowl_EC Rev. C 8/15 HURON UNIVERSAL BOWL WITH EVERCLEAN® VITREOUS CHINA BARRIER FREE 5-1/2" (140mm) 24-7/8" (632mm) 18-7/8" (479mm) FINISHED WALL 1-1/2" (38mm) SPUD CONNECTION 13-3/4" (349mm) 17-1/8" (435mm) C/L OUTLET 4-1/4" (108mm) C/L of 1/2"(13mm) Dia. Holes 21" (533mm) 10-3/4" (273mm) 6" (152mm) C/L OUTLET 4-1/4" (108mm) FINISHED FLOOR 6" (152mm) DIA. HOLE IN WALL 8-1/2" (216mm) (2) SLOTS 1" x 1/2" (25mm x 13mm) NOTES: * VARIABLE — CHECK WITH MANUFACTURER OF FLUSHVALVE FOR PROPER ROUGH-IN DIMENSIONS. WASTE OUTLET SEAL RING MUST BE NEOPRENE OR GRAPHITE-FELT (WAX RING NOT RECOMMENDED). TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM BREAKER ON FLUSH VALVE, THE PLUMBER MUST VERIFY DIMENSIONS SHOWN FOR SUPPLY ROUGHING. FLUSH VALVE NOT INCLUDED AND MUST BE ORDERED SEPARATELY. IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard A112.19.2. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages. © 2015 AS America Inc. M100 spec_3312-3313_001_HuronUnivBowl_EC Rev. C 8/15
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project