advertisement
SouthernLINC i410 Phone
User’s Guide
Dummy Page - To be discarded before printing
DECLARATION OF CONFORMITY
Per FCC CFR 47 Part 2 Section 2.1077(a)
Responsible Party Name: Motorola, Inc.
Address: 8000 West Sunrise Boulevard
Plantation, FL 33322 USA
Phone Number: 1 (800) 453-0920
Hereby declares that the product:
Product Name: i410
Model Number: H76XAH6JR7BN
FCC-ID: IHDP56KR2
Conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a), 15.107(d) and section 15.109(a)
FCC Notice to Users
The following statement applies to all products that have received FCC approval. Applicable products bear the FCC logo, and/or an FCC ID in the format FCC-ID: IHDP56KR2 on the product label.
Motorola has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment. See 47 CFR Sec. 15.21.
Class B Digital Device
As a personal computer peripheral, this device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. See 47 CFR Sec. 15.19(3).
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Industry Canada Notice to Users
Operation is subject to the following two conditions: (1) This device may not cause interference and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
See RSS-GEN 7.1.5.
Motorola, Inc.
Consumer Advocacy Office
600 North US Highway 45
Libertyville, IL 60048 www.hellomoto.com
Note: Do not ship your phone to the above address. If you need to return your phone for repairs, replacement, or warranty service, please contact the Motorola Customer Support Center at:
1-800-453-0920 (United States)
1-877-483-2840 (TTY/TDD United States for hearing impaired)
Certain mobile phone features are dependent on the capabilities and settings of your service provider’s network. Additionally, certain features may not be activated by your service provider, and/or the provider's network settings may limit the feature’s functionality. Always contact your service provider about feature availability and functionality. All features, functionality, and other product specifications, as well as the information contained in this user's guide are based upon the latest available information and are believed to be accurate at the time of printing. Motorola reserves the right to change or modify any information or specifications without notice or obligation.
MOTOROLA and the Stylized M Logo are registered in the US
Patent & Trademark Office. All other product or service names are the property of their respective owners. Java and all other
Java-based marks are trademarks or registered trademarks of Sun
Microsystems, Inc. in the U.S. and other countries.
© Motorola, Inc., 2009.
Manual Number: NNTN7854A
HELLOMOTO
Introducing your new Motorola i410 phone. Here’s a quick anatomy lesson.
Volume Keys
PTT Button
Audio Jack
Speaker
On/Off Key Smart Key
Micro USB Connector
Connects charger and accessories.
Left Soft Key
Perform function in lower left display.
Menu Key
From home screen, open main menu.
Talk Key
Make & answer calls.
4-Way Navigation Key
Ready
10:05pm 10/23
Antenna
For clear calls
(Back side beneath battery)
Right Soft Key
Perform function in lower right display.
OK Key
Web Key
End/Power Key
End calls, exit menu system, turns phone on/off.
1
2
check it out
Ready
10:05pm 10/23
2 Customizable r key that can be used to open the
Settings screen
Ready
10:05pm 10/23
3 Press the Navigation Key up, down, left or right to highlight a menu feature.
1 Press and hold the
Power Key @ for a few seconds, or until the screen lights up, to turn on your phone.
4 Press the r to select.
contents
check it out . . . . . . . . . . . . 2
menu map . . . . . . . . . . . . . 5
use and care . . . . . . . . . . . 7
essentials . . . . . . . . . . . . . 8 about this guide . . . . . . 8
SIM card . . . . . . . . . . . . 9 battery . . . . . . . . . . . . . . 9
talkgroup calls . . . . . . 15
store a phone number or PTT ID . . . 16
call a stored phone number or PTT ID . . . 17
your phone number and PTT ID . . . . . . . . . 18 text messages . . . . . . 18
using your handset as a modem . . . . . . . . 22
main attractions . . . . . . 23 media center . . . . . . . 23
basics . . . . . . . . . . . . . . . 33 display . . . . . . . . . . . . 33
text entry . . . . . . . . . . 34
volume . . . . . . . . . . . . 37 navigation key . . . . . . 37 handsfree speaker . . 37
redial . . . . . . . . . . . . . . 42 voice names . . . . . . . . 42
caller ID. . . . . . . . . . . . 43 call forward . . . . . . . . 43
LINCaround. . . . . . . . . 46
customize. . . . . . . . . . . . . 53 ring tones . . . . . . . . . . 53
wallpaper . . . . . . . . . . 54
backlight . . . . . . . . . . . 55
LED indicators . . . . . . 55 datebook . . . . . . . . . . . 55
hide or show location information . 56
contents 3
other features . . . . . . . . . 57 advanced calling . . . . 57
contacts . . . . . . . . . . . 58
datebook . . . . . . . . . . . 59
GPS . . . . . . . . . . . . . . . 60
handsfree . . . . . . . . . . 61 personalize . . . . . . . . . 61
TTY . . . . . . . . . . . . . . . . 62 security . . . . . . . . . . . . 62
Legal and Safety. . . . . . . 62
Safety and General Information 62
Precautions . . . . . . . . 63
Compatibility. . . . . . . . 63
Recycling . . . . . . . . . . 64
Warnings. . . . . . . . . . . 65
4 contents
Safety . . . . . . . . . . . . . 68
Rate . . . . . . . . . . . . . . . 70
Canada . . . . . . . . . . . . 71
Organization. . . . . . . . 76
Recyclable . . . . . . . . . 76
Information . . . . . . . . . 77
Notice . . . . . . . . . . . . . 77
Security. . . . . . . . . . . . 77
While Driving . . . . . . . 78
index. . . . . . . . . . . . . . . . . 80
contents 5
6 main menu
Q
Downloads Store
1
Mobile Web
L
Java Apps
• Buy More
• Java System t
Ring Tones
• Buy Ring Tones
• Vibrate All: On/Off
• Ringers
• Vibrate
• Silent
N
PTT Features
• PTT List
• Send Message
• Send Picture
• Send Event
• Send My Info
• Send Contact
• Configure
0
VoiceRecord
• [New VoiceRec]
D
Datebook
• [New Event]
menu map
B
Recent Calls c
GPS
• Position
• Privacy
• Interface o
Profiles
• [New Profile]
• Standard
• Car
• Meeting
• Office
• Outdoors
• Headset
• Surveillance p
Call Alert j
Media Center
J
My Info
• My Name
• Line 1
• Line 2
• PTT ID
• Group ID
• Carrier IP
• IP1 Address
• IP2 Address
E
Messages
• [Create Message]
• Voice Mail
• Quick Notes
• Drafts
• Text Outbox
• Net Alert
• Fax Mail
• Text Inbox l
Memo
A
Contacts
M
Call Timers
• Last Call
• Phone Reset
• Phone Lifetime
• Prvt/Grp Reset
• Prvt/Grp Life
• Kbytes Reset
K
Shortcuts
• [New Entry]
• 1)Shortcuts
• 2)Cntcs[New Contact]
• 3)Ring Tones
• 4)PTT Features
• 5)Mobile Web
• 6)Java Apps
• 7)Settings
• 8)Profiles
• 9)Call Forward
P
Call Forward
• Forward: All Calls
• To: On/Off
settings menu
Display/Info
• Wallpaper
• Text Size
• Theme
• Home Icons
• Backlight
• Clock
• Menu View
• Large Dialing
• Language
Phone Calls
• Set Line
• Any Key Ans
• Auto Redial
• Call Waiting
• Auto Ans
• Flip Activation
• Minute Beep
• Call Duration
• TTY
• Hearing Aid
• Notifications
• DTMF Dialing
Push To Talk
• Tkgrp Silent
• Tkgrp Area
• One Touch PTT
• Alert Type
• PTT Quick Notes
• On/Off Features
• Store Rcvd Info
Personalize
• Menu Options
• Up Key
• Down Key
• Left Key
• Right Key
• Center Key
• Left Sftkey
• Right Sftkey
• Power Up
Volume
• Line 1
• Line 2
• Messages
• Earpiece
• Speaker
• Keypad
• Java Earpiece
• Java Spkr
• Data
Security
• Phone Lock
• Keypad Lock
• SIM PIN
• GPS PIN
• Change Passwds
Advanced
• Alert Timeout
• Headset/Spkr
• Connectivity
• Reset Defaults
• Return to Home
• Transmitters
• Phone Only
• Baud Rate
7
use and care
Use and Care
To care for your Motorola phone, please keep it away from: liquids of any kind
Don’t expose your phone to water, rain, extreme humidity, sweat, or other moisture.
extreme heat or cold
Avoid temperatures below
-10°C/14°F or above 45°C/113°F.
microwaves
Don’t try to dry your phone in a microwave oven.
dust and dirt
Don’t expose your phone to dust, dirt, sand, food, or other inappropriate materials.
cleaning solutions
To clean your phone, use only a dry soft cloth. Don’t use alcohol or other cleaning solutions.
the ground
Don’t drop your phone.
8 use and care
essentials
Caution: Before using the phone for the first time, read the Important Safety and Legal information included in the gray edged pages at the back of this guide.
about this guide
This guide shows how to locate a menu feature as follows:
Find it: / > Settings
This means that, from the home screen:
1 Press the menu button / to open the
Main Menu.
2 Press the navigation key to scroll to
Settings.
3 Press the r to select it.
symbols
This means a feature is network/ subscription dependent and may not be available in all areas. Contact
SouthernLINC Wireless for more information.
This means a feature requires an optional accessory.
essentials 9
SIM card
insert the SIM card
Turn off your phone and remove your battery before you install or remove a SIM card.
Carefully slide the SIM chip into your phone, until it lies flat in the SIM chip holder.
Warning: To avoid loss or damage, do not remove your SIM chip from your phone unless absolutely necessary.
battery
battery installation
1 Open the micro-USB and headphone jack connector covers. Slide the battery door up until it is released.
10 essentials
2 Remove battery door.
3 Insert battery as shown below. Push the battery down until it snaps in place.
5 Close the micro-USB and headphone jack connector covers.
4 Replace the battery door.
essentials 11
battery charging
New batteries are not fully charged. charge using the charger
1 Pull out the connector cover, and insert the charger into the accessory connector on your phone as shown.
2 Plug the other end of the charger into the appropriate electrical outlet.
When you charge the battery, the battery level indicator at the upper right of the screen shows charging progress. At least one
12 essentials segment of the indicator must be visible to ensure full phone functionality while charging.
charge from your computer
You can partially charge your phone’s battery by connecting a Motorola-approved
USB cable from your phone’s micro-USB port to a high power USB connector on a computer (not a low-power one, such as the
USB connector on your keyboard or buspowered USB hub). Typically, USB high-power connectors are located directly on your computer.
Note: The phone will be charged at a slower rate than it is charged with the rapid charger.
Your computer must be turned on, and you must have correct software drivers installed on your computer. If the Phone is off when the USB cable is connected between the computer and the phone, the phone will
power up in charging mode. This mode allows the phone to charge fastest and quickest.
Note: If the battery is very low, the phone will not turn On, but it will continue to charge at a low rate. The phone will power up in charging mode when the battery has been charged to approximately 5% of its capacity.
If the phone is turned on while charging from a computer, it will not fully charge the battery.
In this case, the battery charge will be maintained approximately between 80% and
95% of the battery's capacity. Cables and software drivers are available in Motorola
Original
TM
data kits, sold separately.
Tip: Motorola batteries have circuitry that protects the battery from damage from overcharging. Of course, unplugging the charger from the wall will prevent the battery from overcharging.
battery indicators
d The battery is at approximately 100% to 90% capacity when the indicator is blue and displaying three bars.
e The battery is at approximately 65% capacity when the indicator is green and displaying two bars.
f The battery is at approximately 10% capacity when the indicator is yellow and displaying one bar.
g The battery is at approximately 5% capacity when the indicator is red and has a flashing red bar.
h The battery is charging.
essentials 13
turn it on & off
To turn on your phone, press and hold @ for a few seconds or until the display turns on.
Note: If you press @ for more than four seconds, the handset will power “On” in
“Transmitter Off” mode. See “transmitters” on page 38.
To turn off your phone, press and hold @ for two seconds.
enable security
You must enable security the first time you power on you phone or within 10 days of first activation.
1 Press - under Ok.
14 essentials
2 You are prompted to enable security.
Press - under Yes. A series of screens followed by the default home page displays.
3 Press @ to return to the home screen.
make a phone call
Enter a phone number and press ` to make
a call or use a voice name. See “voice names” on page 42.
Note: For best call quality avoid covering the antenna with your hand.
To hang up press @.
answer a phone call
When your phone rings and/or vibrates, you have the following options to answer:
1 If you want to answer the call on the handsfree speaker phone, press the speaker key s with the flip closed. To hang up press the smart key (.
2 If you want to answer the call using the handset, just open the flip. To hang up press @ or close the flip.
Note: You must have the Flip Activation feature
On. See “advanced calling” on page 57.
make a push to talk call
Your PTT ID is the number at which you receive one-to-one Push To Talk calls.
Talkgroup numbers are numbers through which you receive one-to-many group calls.
To make a push to talk call
1 Enter the PTT ID you want to call.
2 Press and hold the PTT button. Begin talking after your phone emits a chirping sound.
3 Release the PTT button to listen.
To end the call press @.
Note: A Push To Talk call ends automatically if there is no activity on the call for a few seconds.
Tip: To let someone know you want to talk to them on a Private call, press - under Alert and press the PTT button.
answer a push to talk call
1 When your phone emits a chirping sound or vibrates to indicate you are receiving a
Private call, wait for the caller to finish speaking. essentials 15
2 Press and hold the PTT button and begin talking after your phone emits a chirping sound.
3 Release the PTT button to listen.
To end the call press
under Exit.
talkgroup calls
A group call is similar to a Push To Talk call, but is made to all members of a Talkgroup at once.
Before you can make or receive group calls, a
Talkgroup must be established. After the
Talkgroup is established, you must join the
Talkgroup.
joining a talkgroup
Your sales representative or your service provider establishes talkgroups for you and assigns each Talkgroup a Talkgroup number.
16 essentials
You can choose a name for each of your
Talkgroups when you create entries for them in Contacts.
To receive group calls made to any of these
Talkgroups, you must join the Talkgroup.
1 Press - under Contcs. or
From the main menu, scroll to Contacts and press r.
2 Scroll to the Talkgroup you want to join.
3 Press - under Join.
Note: You can only monitor one Talkgroup at a time.
making talkgroup calls
1 Press #. Then enter the Talkgroup number using the keypad. or
Choose the Talkgroup name from
Contacts or recent calls list.
2 Proceed as if making a Private call.
receiving talkgroup calls
To answer a group call:
• Proceed as if answering a Private call.
Only one person at a time may speak on a group call.
• The Private ID or name of the person who is speaking will appear on the display below the Talkgroup number.
turning off talkgroup calls
To set your phone to prevent you from hearing group calls to your Talkgroup:
Find it: / > Settings > Push to Talk >
Tkgrp Silent > On.
To set your phone to let you hear group calls to your Talkgroup:
Find it: / > Settings > Push to Talk >
Tkgrp Silent > Off.
store a phone number or PTT ID
You can store a phone number or PTT ID in
Contacts:
1 Press / > Contacts > [New Contact].
2 Enter a name for the new entry. Each entry’s name can contain up to 20 characters.
3 Select Ringer if you wish to assign a specific ring tone to that phone number.
4 Select a type for the entry (Mobile, Private,
Work1, Work2, Home, Email, Fax, Pager, Talkgroup, IP or Other). To store a PTT ID, choose PTT ID.
essentials 17
5 Enter the number for the entry and press
- under Save to save the entry.
Tip: Before saving the entry, you can save more information. You can store E-mail addresses, IP addresses, or Talkgroup IDs.
You can assign each number a speed dial number and voice name.
After you have saved the number, the new
Contacts entry is displayed.
call a stored phone number or PTT ID
Shortcut: From the home screen press
- under Contcs or
Find it: / > Contacts
1 Scroll to the Contacts entry.
Tip: By pressing the first letter of the name of the Contacts you want, you will be taken to all the contact names starting with the letter you pressed.
2 If the Contacts entry contains more than one number, scroll left or right until the type of the number you want to call is displayed (Mobile, PTT ID, Work1, Work2, Home, etc.).
3 If you choose a phone number, press ` to call the entry.
or
If you choose a PTT ID or Talkgroup ID, press and hold the PTT button to call the number.
Tip: If the Contacts entry you scrolled to contains a PTT ID, you can make an instant
Push To Talk call to that PTT ID by pressing and holding the PTT button, even if the PTT ID is not the type of number displayed.
18 essentials
your phone number and
PTT ID
Find it: / > My Info
Tip: Want to see your phone number or PTT
ID while you’re on a call? Press / > My Info.
text messages
Your phone sends text messages using
Mobile Originated Short Messaging Services
(MOSMS) and receives text messages from other phones that are using MOSMS.
Note: The messaging menus may look slightly different, depending on the messaging setup of your phone.
set it up
Before you begin using text messaging, you may need to set up your signature, service center number, and expiration information.
Shortcut: From the home screen press
- under Mesg > Text Inbox or Text Outbox > / >
Text Msg Setup.
or
Find it: / > Messages > Text Inbox or Text Outbox >
/ > Text Msg Setup
The following options become available: option
Signature: Enter your signature (up to 11 characters long).
Delivery Rpt: Set this option to On if you want your phone to show you when the message has been delivered.
essentials 19
option
Srvc Cntr No: Enter the phone number of your service center. If you do not know this number, contact SouthernLINC Wireless.
Expire After: This is the amount of time messages you send are saved at the service center if they cannot be delivered.
After this period, they are discarded.
Scroll to select the number of days you want your messages to be saved.
Cleanup: Controls how long messages remain in the Inbox and Outbox before they are deleted.
Press - under Done to save the information you entered.
receive a text message
1 To view the message press
- under Read.
2 To dismiss the message notification press
- under Back.
Note: If your phone is powered off when you receive a text message, your phone notifies you the next time you power it on. If you are out of your coverage area, your phone alerts you when you return to your coverage area.
Tip: While reading a text and numeric message that contains a phone number, you can press ` to call that number.
read from the message center
1 From the home screen press - under
Mesg > Text Inbox.
2 Select the message you want to read or press the number of the message you want to read. If the message fills more than one screen, scroll to read it.
Tip: Scrolling through one message lets you view the next message.
20 essentials
3 To reply to the message, press - under
Reply or to see all other choices, including forwarding and deleting the message, calling the sender, or storing the sender’s number in Contacts, press /.
create and send text messages
1 From the home screen press - under
Mesg > [Create Message].
or
Select Text Inbox, Text Outbox, or Drafts.
2 Use the keypad to enter the recipient’s phone number and press r
.
or
Highlight the To: field and press r to display the Send To screen. Enter the recipient’s phone number using the keypad or press
- under Contcs, and select the contact you want. You can have up to five recipients for the message.
3 Select Msg and enter the text of the message or to use a quick note press - under Browse and scroll to the quick note you want and press r.
4 Press / > Set Send Method and select Text,
Fax, x400, Paging, Email, ERMES, or Voice.
5 If you want to send the message, press
- under Send or to delete the message without sending it, press
- under Cancel.
Note: If you want to request confirmation of delivery press / > Delivery Report > On.
use drafts
When you save a message as a draft, it is saved in the drafts folder.
Shortcut: From the home screen press - under Mesg > Drafts.
1 Select the draft you want to edit. You also have the choice to create new text messages from this menu.
essentials 21
2 To edit the fields you want to change, follow step 2 through step 5 in “create and send text messages” above.
resend text messages
Shortcut: From the home screen press - under Mesg > Text Outbox.
1 Scroll to the message you want to resend or press the number of the message you want to resend.
2 Press / and select Resend.
delete sent text messages
Shortcut: From the home screen press - under Mesg > Text Outbox.
1 Scroll to the message you want to delete.
2 Press - under Delete.
3 Press - under Yes to confirm.
delete all unlocked sent messages
Shortcut: From the home screen press - under Mesg > Text Outbox.
1 Press / > Delete All.
2 Press - under Yes to confirm.
manage memory
Your text inbox, outbox, and drafts folder have a set amount of memory available for storing messages.
The text inbox holds 20 messages. If the text inbox is full, you cannot receive messages until you delete some.
The outbox and drafts folder share memory space. Together they can hold 30 messages.
If the outbox and drafts folder memory is full, you cannot send messages or save drafts until you delete some.
22 essentials
To view the amount of memory available in your text inbox, text outbox, or drafts folder:
1 From the idle screen press - under Mesg.
2 Scroll to the folder whose available memory capacity you want to view.
3 Press
- under Memory.
using your handset as a modem
Your phone can be connected to a computer via USB for use as a modem. For more specific information on how to setup your phone for use with your computer please visit www.motorola.com/support and look under the FAQ section. essentials 23
main attractions media center
The media center lets you access pictures and audio recordings stored in your phone’s memory.
The following audio recordings can be accessed through the media center:
• Voice records
• Musical ring tones in the list of ring tones
• Audio recordings downloaded to your phone
Audio files supported by the Media Center include:
Format
.au
.midi
.mp3
.wav
Sampling Rates/Bit Rates
8 KHz/8 kbps
8 KHz, Type 0
8 KHz/192 kbps
8 KHz/64 kbps
Image files supported by the Media Center include:
Format
.png
.gif
.jpg
Max. Image Size (in pixels)
640 x 480
640 x 480
640 x 480
24 main attractions
Format
.wbmp
Max. Image Size (in pixels)
127 x 127
use PTT Features
Your phone can send and receive the following items through Push To Talk calls with other phones that have this capability:
• Short text messages 1
• Pictures 1
• Datebook events
• My Info
• Contact information
You can choose to send My Info and contact information to any PTT ID.
You can choose to send pictures, messages, events to the PTT ID you are engaged in a
Push To Talk call with, PTT IDs on the Recent
Calls list, and PTT IDs stored in Contacts.
When you make or receive a Push To Talk call, your phone automatically determines whether the phone you are engaged in a Push To Talk call with is able to receive each of these items. Your phone saves this information for as long as the PTT ID is on your Recent Calls list or is saved in your Contacts. Your phone updates the saved information each time you make or receive a call to or from that PTT ID.
You can turn your phone’s ability to send and receive messages, pictures, events on and off.
Note: You cannot send PTT feature items during Talkgroup calls.
1. Additional charges may apply.
main attractions 25
send messages
Note: This feature requires a subscription. Please contacts your sales representative or SouthernLINC Wireless at
1-800-406-0151.
The PTT Messages feature lets you send short text messages through Push To Talk calls.
When you send a message, it appears on the display of the phone you are engaged in the
Push To Talk call with. The message won’t be stored in the recent calls list.
The first time you send a message after turning the phone on, Messaging Fees May Apply.
Continue? appears and you are prompted to respond.
begin a message and choose a recipient
You can begin a message during a Push To
Talk call, from the Contacts list, the Recent Calls list, or from the PTT Features.
begin a message during a Push To Talk call:
While in a Push To Talk call, press / > PTT
Feature > PTT Message.
begin a message from the Contact or the Recent Calls list
1 From the Contacts or the Recent Calls list, select the entry containing the PTT ID you want to send the message to.
2 Press / > PTT Feature > PTT Message.
begin a message from the PTT Features
26 main attractions
The PTT Features lets you select the PTT ID you want to send the message to from Contacts or the Recent Calls list.
Find it: / > PTT Features > PTT Message
Then select A Contact or A Recent Call to see a list of entries from the Contacts or the Recent Calls list that can receive messages.
create messages
After you have begun a message and chosen a recipient, a screen appears that lets you create the text of the message you want to send. Your message may be up to 400 characters long.
You can choose from a list of ready-made words or short phrases called Quick Notes.
You can use a Quick Note as it is or edit it before you send it. Editing a Quick Note changes the Quick Note for this message only and will not change the Quick Note on the list.
send a completed message
After you have completed your message, press the PTT button to send it.
receive messages
When you receive a message, a message notification appears on the display. To view the message press r.
To dismiss the message press - under
Dismiss.
reply to a message
1 View the message.
2 Press
- under Reply.
3 Create the message and press the PTT button to send it.
main attractions 27
send pictures
Note: This feature requires a subscription. Please contacts your sales representative or SouthernLINC Wireless at
1-800-406-0151.
You can send pictures stored in Media Center through Push To Talk calls. The picture you send appears on the Private call recipient’s display.
If the recipient accepts the picture, their phone saves the picture.
The first time you send a stored picture after turning the phone on, Picture Fees May Apply.
Continue? appears and you are prompted to respond.
Note: You cannot make or receive Push To
Talk calls while transmitting or receiving a picture.
send a picture during a call
1 While in a Push To Talk call, press - under Picture or press / > PTT Feature > PTT
Picture .
A list of pictures that can be included in a
Push To Talk call appears.
2 Select the picture you want to send.
3 Press the PTT button to send the picture.
4 Wait while the picture is transmitted. The
Push To Talk call is temporarily interrupted while a picture is transmitted.
5 When prompted, press the PTT button to resume the Push To Talk call.
start a call by sending a picture
from Media Center
Find it: / > Media Center
1 Select the picture you want to send.
28 main attractions
2 Press / > Send Via... > PTT Picture.
A list of contacts that have PTT IDs and are able to receive pictures appears.
3 Select the name of the person you want to send the picture to.
4 Press the PTT button to send the picture.
5 When prompted, press the PTT button to resume the Push To Talk call. from the PTT Features:
Find it: / > PTT Features > PTT Picture
1 Select A Contact, or A Recent Call to see a list of entries that can receive pictures.
2 Select the entry containing the PTT ID you want to send the message to.
3 Select the picture you want to send.
4 Press the PTT button to send the picture.
5 Once picture has been sent, when prompted press the PTT button to resume the call.
receive a picture
When someone sends you a picture, your phone emits a tone or vibrates and a message appears asking if you want to accept the picture.
Pictures you receive are saved to your phone’s memory. They are accessible through Media
Center.
When you see a message asking if you want to accept the picture, press Yes to accept or No to decline.
Tip: If you want to stop the transmission before it is finished, press @.
Note: The first time you accept a stored picture after turning the phone on, Picture Fees
May Apply. Continue? appears and you are main attractions 29
prompted to respond. Press - under Yes to accept the picture.
clear a picture from the display
If you want to clear a picture from your phone’s display while still on a call, press
/ > Clear Screen.
The picture will not appear on the display again the next time you receive a call from person who sent it. This does not delete the picture from Media Center.
send My Info
1 While in a Push To Talk call press / >
Send via PTT and push the PTT button to send.
or
2 From the home screen press / >
My Info > / > Send via PTT and push the PTT button to send.
30 main attractions
set my info sending option
You can control what portion of the information in My Info is sent and whether it is sent automatically in every call or only when you choose to send it.
Find it: / > PTT Features > Configure >
PTT My Info > Info to Send
1 Select or remove the fields you want to send.
2 Press - under Done.
The information your phone sends always includes My Name and PTT ID. You may also send
Line 1, Line 2, Carrier IP, and Circuit Data depending on your sending options. automatic sending
To control whether you send your information automatically:
Find it: / > PTT Features > Configure >
PTT My Info > Auto Send
1 Select On or Off.
When you make a call in which your information is sent automatically, the name you entered in the My Name field of My Info appears on the display of the recipient’s phone, even if your name and PTT ID are not stored in the recipient’s Contacts.
send contact information
1 While in an Push To Talk call press / >
PTT Feature.
2 Select PTT Info and select the contact information you want to send.
3 Push the PTT button to send.
or
1 From the home screen press / >
PTT Features > PTT Info.
2 Enter the PTT ID number of the person you want to send the Contact information to or press
- under Browse.
3 Select from Recent Calls, Contacts, or Memo.
4 Select the contact information you want to send and push the PTT button.
turn PTT features on and off
You can turn your phone’s ability to send and receive messages, pictures, and Datebook events on and off.
You cannot turn your phone’s ability to send and receive My Info and contact information on and off.
Find it: / > PTT Features > Configure
1 Select On/Off Features.
2 Check or uncheck PTT Messages, PTT Pictures and/or PTT Events.
3 Press - under Done.
main attractions 31
one touch PTT
Find it: / > PTT Features > Configure >
One Touch PTT
One Touch PTT sets your phone to do any of the following each time you press the PTT button from the home screen: option
Off: Nothing happens when you press the
PTT button from the home screen.
Last Call: Call the most recent PTT ID or
Group on the recent calls list.
Assigned No.: Call a PTT ID you assign. Enter the number using your keypad, or press - under Search. Select Contacts, Recent Calls, or
Memo.
Note: If you are entering a Talkgroup number, enter
# before the number.
PTT Features: Go to PTT Features. See “PTT
32 main attractions option
Send Message: Go to the first screen to send a message.
Send Picture: Go to the first screen to send
pictures. See “send pictures” on page 28.
Send Event: Go the first screen to send a
Datebook event.
Send My Info: Go to the first screen to send My
Info. See “send My Info” on page 30.
Send Contacts: Go to the first screen to send a contact. See “send contact information” on page 31.
PTT Features
The PTT Features lets you quickly access PTT features, and other Push To Talk call features, from the main menu.
Find it: / > PTT Features
1 To send a PTT features item, select Send
Message, Send Picture, Send Event, Send My Info, or
Send Contact. After choosing what PTT item you are sending, select a contact and press the PTT button to send.
or
2 Select Configure to configure your Quick Notes,
Send My Info, One Touch PTT, or On/Off Features.
main attractions 33
basics
See page 1 for a basic phone diagram.
display
The home screen shows when you turn on the phone. To dial a number from the home screen, press number keys and `.
Note: Your home screen may look different.
Date and
Time
Ready
10:05pm 10/23
Soft key labels show the current soft key functions. For soft key - locations, see
status indicators
Status indicators are shown at the top of the home screen:
1. 2. 3. 4.
5. 6. 7.
Ready
10:05pm 10/23
Left
Soft Key Label
Right
Soft Key Label
1 Signal Strength Indicator: Vertical bars show the strength of the network
34 basics
connection. You can’t make or receive calls when 1 or 0 shows.
2 Active Phone Line: 1 indicates phone line
1 is ready to make calls.
3 Speaker Off: Sounds associated with
Push To Talk Mobile to Mobile calls and
Talkgroup calls are set to come through the earpiece rather than through the speaker.
4 Ringer On: Your phone is set to ring.
5 Message Indicator: Shows when you receive a text message.
6 Packet Data: Your handset is ready to transfer packet data or is transferring packet data.
7 Battery Charge Indicator: A fuller battery indicates a greater charge. Recharge the battery when your phone shows Low Battery.
text entry
Some features let you enter text.
Your phone provides convenient ways to enter words, letters, punctuation, and numbers whenever you are prompted to enter text (for example, when adding a Contacts entry or when text messaging).
change the character input mode:
1 When you see a screen where you can enter text, press / to change the character input mode.
basics 35
2 Select one of the following options: entry modes
Alpha Press a key several times for each character.
Word Enter words using a predictive text entering system that lets you enter a word with fewer keypresses.
Enter symbols.
Symbols
Numeric Enter numbers by pressing the numbers on the keypad.
Languages Lets you select the input language.
Signature Inserts your stored signature
Tip: When entering text, press and hold
#
to change letter capitalization (Abc > ABC > abc).
word mode
Word English Text Input lets you enter text into your phone by pressing keys just once per letter.
Word English Text Input analyzes the letters you enter using an intuitive word database and creates a suitable word. (The word may change as you type.) enter a word using Word Character
Input:
1 Select the Word character input mode.
2 Press the corresponding keys once per letter to enter a word (for example, to enter the word Jeff, press
5 3 3 3
(If you make a mistake, press - under
).
Delete or
* to erase a single character.
Press and hold - under Delete or *
to delete an entire entry.)
36 basics
3 To accept a word and insert a space, press
#
.
alpha mode
enter characters by tapping the keypad:
1 Select the Alpha mode.
2 Press the corresponding keys repeatedly until the desired letter appears. (For example, to enter the word Jeff, press
5 once,
3
two times,
3
three times, and
3
three times again. If you make a mistake, press - under Delete to erase a single character. Press and hold
- under
Delete to erase an entire entry.)
By default, the first letter of an entry is capitalized and the following letters are lowercased. After a character is entered, the cursor automatically advances to the next space after two seconds or when you enter a character on a different key.
Characters scroll in the following order:
8
9
0
#
*
2
3
4
5
6
7 characters
1 Space . 1 ? ! , @ & : ; “ - ( ) ‘ ¿ ¡ %
£ $ ¥
A B C 2 Á Ã Â À Ç
D E F 3 É Ê È
G H I 4 Í Ì
J K L 5
M N O 6 Ó Õ Ô Ò
P Q R S 7 ß
T U V 8 Ú Ü Û Ù
W X Y Z 9
+ - 0 * / \ [ ] = > < # §
Space
Back basics 37
volume
Press the volume keys up or down to:
• turn off an incoming call alert
• change the earpiece volume during calls
• change the ringer volume from the home screen
Tip: You can quickly set your ringer to
Vibrate All by holding the down volume key in the home screen.
navigation key
Press the navigation key up, down, left, or right to scroll to items in the display. When you scroll to something, press r.
handsfree speaker
You can use your phone’s hands-free speaker to make calls without holding the phone to your ear.
During a call press the speaker key s to turn the hands-free speaker on.
The hands-free speaker stays on until you press the speaker key or end the call. The next phone
38 basics
call will redirect the audio back to the earpiece.
transmitters
Note: Consult airline staff about the use of the Transmitters feature during flight. Turn off your phone whenever instructed to do so by airline staff.
Transmitters turns off your phone’s calling features in situations where wireless phone use is prohibited, but you can use the phone’s other non-calling features when Transmitters turned Off.
Find it: / >
u
> Advanced > Transmitters > Off
use GPS with map software
Your phone can be connected to a PC, laptop, or PDA via USB for use as GPS receiver. For more specific information on how to setup your phone for use with your computer please visit www.motorola.com/support and look under the
FAQ section.
features for the hearing impaired
using your phone with a hearing aid
For best results use the following optimization procedures and handset setting. They generally apply as well for users with cochlear implants: basics 39
optimize your handset position and orientation
While in a phone call slide your phone up and down, then left and right until best microphone coupling is obtained. You also may need to adjust your hearing aid (HA) volume setting .
If you are unsure whether your HA is telecoil equipped or needs an auxiliary magnet, please refer to your HA user guide or contact a hearing aid professional or supplier.
Approximate telecoil location is within
6-13 mm of this location.
Off - Shut off
M - Microphone
T - Telecoil
If your HA has a telecoil, activate its switch, then also rotate the handset as illustrated to align the telecoils.
Note: Some automatically switched hearing aids may need an auxiliary switching magnet.
Approximate telecoil location is just above the battery.
choose your hearing aid setting
Find it: / > Settings > Phone Calls > Hearing Aid.
1 Set this option to Microphone. Microphone coupling is now optimized. or
40 basics
2 Set this option to Telecoil. Handset meets
US federal requirements for telecoil coupling sound.
or
3 Set this option to Off (factory default). This is the setting for non HA users.
basics 41
calls
To make and answer calls, see page 14.
turn off a call alert
You can press the volume keys to turn off a call alert before answering the call.
recent calls
The Recent Calls list contains information associated with calls you have made and received and call alerts you have received.
When you send or receive Push To Talk calls, the Recent Call list contains the following PTT items with those calls:
• Messages
• Pictures
42 calls
• Events
• My Info
• Contacts
The recent calls list displays up to 20 of the most recent calls and call alerts.
Find it: / > Recent Calls
Tip: You can also access the Recent Calls list by pressing the navigation key down.
1 Scroll through the list.
2 Highlight the item you want to view or perform some action on.
3 To view more details of the item press r.
store an item to contacts from recent calls
Phone calls, Push To Talk calls, My Info received from other phones, or Contacts entries received from other phones can be stored to the Contacts list from the Recent
Calls list.
Find it: / > Recent Calls
1 Scroll to or select the item you want to store.
2 Press / and select Save to store the information as a new entry in the
Contacts list.
or
3 If Save is not one or you options, press
/ > Update Contacts. And select the contact you want to update.
4 Press - under Save to save your changes.
redial
To redial your last outgoing phone call, press and hold `.
voice names
You can place calls by speaking commands to your phone if you have previously assigned a voice name to your contacts.
assign voice names to contacts
1 Press
- under Contcs and select [New
Contact].
2 Assign a name, phone number and select
[Options].
3 Select Voice Name and follow the prompt to record the voice name.
4 Press
- under Back and - under Save to save the entry.
calls 43
place a call using voice command
1 From the home screen press and hold the speaker key s until you are prompted to say the voice name.
The handset will automatically place the call.
caller ID
Note: This feature requires a subscription. Please contacts your sales representative or SouthernLINC Wireless at
1-800-406-0151.
Caller ID allows people to identify a caller before answering the phone by displaying the number of the incoming call. If you do not want your number displayed when you make a call, just follow these easy steps.
To block your phone number from being displayed for a specific outgoing call:
1 Press
* 6 7
..
44 calls
2 Enter the number you want to call.
3 Press `.
To permanently block your number, call
SouthernLINC Wireless at 1-800-406-0151.
call forward
Call forwarding sends calls to the phone numbers you specify. You can forward all calls to one number or forward missed calls to different numbers depending on the reason you missed the call. You can forward phone lines 1 and 2 independently.
Find it: / > Call Forward
1 To forward all calls select All Calls and select
To to enter the phone number you want all your calls forwarded to.
or
2 You can specify a forwarding number for each type of missed call by selecting
Detailed and choosing the following options:
If Busy: When your handset is on a call or transferring data.
If No Answer: When you do not answer on the first 4 rings.
If Unreachable: When your handset is out of coverage or powered off.
emergency calls
SouthernLINC Wireless programs one or more emergency phone numbers that you can call under any circumstances, even when your phone is locked or the SIM card is not inserted.
Note: Emergency numbers vary by country.
Your phone’s preprogrammed emergency number(s) may not work in all locations, and sometimes an emergency call cannot be placed due to network, environmental, or interference issues.
Your phone supports emergency calling.
Emergency phone calls can be made even when your SIM card is blocked or not in your phone.
Dial 911 or your local emergency number to be connected to an emergency response center. If you are on an active call, you must end it before making an emergency call.
When you make an emergency call, your phone’s GPS Enabled feature can help emergency service personnel find you, if you are in a location where your phone's GPS antenna has established a clear view of the open sky and your local emergency response center has the equipment to process location information. Because of the limitations of this feature, always provide your best knowledge calls 45
of your location to the emergency response center when you make an emergency call.
Note: Emergency calls cannot be placed while the keypad is locked.
Note: If you have not registered on the network, emergency calls cannot be placed while your SIM card is in your phone.
international calls
Note: This feature requires a subscription. Please contacts your sales representative or SouthernLINC Wireless at
1-800-406-0151.
speed dial
Each phone number stored in Contacts is assigned a Speed Dial number, which you can use to call that number.
1 From the home screen, use the keypad to enter the Speed Dial number assigned to the phone number you want to call.
2 Press
#.
3 Press `.
turbo dial
The first nine entries in your contacts are set for turbo dial. They can be called by pressing and holding the speed dial number
(1 through 9).
voice mail
Note: To receive voice mail messages, you must first set up a voice mail account with SouthernLINC Wireless.
46 calls
receive a message
When you receive a voice mail message, New
VoiceMail Message appears on the display.
To check voicemail messages press - under
Call.
To dismiss the message notification:
If the flip is closed, press the smart key ( on the top.
If the flip is open, press r, Back, or close the flip.
If the caller leaves a message, this icon y appears on the display, reminding you that you have a new message. Additionally, the
Messaging LED indicator will light up.
Note: By default, the Messaging LED indicator will turn off after 30 seconds.
LINCaround
Note: This is an optional feature. Go to www.southernlinc.com/downloads or contact SouthernLINC Wireless at
1-800-406-0151 about its availability for purchase.
LINCaround allows direct two-way phone-tophone communications between two or more phones equipped for LINCaround. You can make and receive LINCaround calls even when network service is not available. You can talk to anyone on your code and channel within your range.
Note: Range will vary based on terrain, manmade structures and atmospheric conditions.
LINCaround allows you to use code or private mode operation, use up to 10 channels and communicate with standalone LINCaround radios.
calls 47
Note: LINCaround is not compatible with older Family Radio Services products.
The following features and main menu items will not be available while in LINCaround mode:
• On-network phone calls
• On-network Push To Talk Mobile to
Mobile calls
• Data transmission
• Incoming message notification
• Musical ring tones
• Call forwarding
• Messages
• Call Timers
• Call alerts
• Voice records
set your phone to LINCaround
Find it: / > LINCaround > Go To LINCaround.
After a few seconds, the LINCaround idle screen appears. The channel you are set to appears on the first line of the display, the code you are set to appears on the second line of the display and LA Ready appears just above the softkeys.
Note: When switching from the network to
LINCaround, the last channel and code that were set appear on the LINCaround idle screen.
While in LINCaround, this icon m appears on the display, indicating that there is no network signal and LINCaround is active.
Phones used in LINCaround mode should be a minimum of 6 feet apart to maximize performance and improve transmission range.
48 calls
exit LINCaround
Find it: / > LA Options > Exit LINCaround.
The following message displays: Switching to
Network Please Wait displays. After a few seconds, the network idle screen appears.
channels and codes
Your phone has 10 channels and 15 codes.
Channels are divided into sets of frequencies that allow you to make and receive
LINCaround calls. Other parties may also be talking on the same channel.
Codes help minimize interference from unwanted messages and other disturbances when you are on the same channel as others.
To have a conversation, all parties must be on the same channel and code. For private
LINCaround calls, the person you are calling must be in LINCaround and set to the same channel to receive your call.
Note: When making a code call, all parties that are on your code and channel can hear your conversation.
set a channel
1 From the LINCaround idle screen, press
- under Edit.
2 Scroll to Channel and press - under Edit.
3 Select a channel number from 1 to 10.
4 When you are finished, press
- under
Back to return to the LINCaround idle screen.
set a code
1 From the LINCaround idle screen, press
- under Edit.
2 Scroll to Code and press - under Edit.
calls 49
3 Select a code number from 1 to 15 or one of the following options: option
Receive All
Sets your phone to receive LINCaround transmissions from any phone that is set to the same channel, regardless of the code
(1-15). When you receive transmissions with the code set to Receive All, the display changes from Receive All to the code on which the transmission was received.
Tip: You can reply to an incoming call within
6 seconds after hearing the short ending beep by pressing the PTT button.
Note: You cannot initiate a code call when the code is set to Receive All. If you push the
PTT button with the code set to Receive All, you will receive an error message.
option
Pvt Only
Allows you to have a private conversation with another person using LINCaround.
When on a private LINCaround call, no other parties can hear your conversation. In order to make a private LINCaround call, you must use the valid 10-digit Personal
Telephone Number (PTN) of the person you are calling. The person you are calling must be in LINCaround and set to the same channel to receive your call.
Note: An error message will occur if you don’t use a valid PTN, or the person that you are trying to reach is not in LINCaround, or is set to a different channel or out of range.
4 When you are finished, press
- under
Back to return to the LINCaround idle screen.
50 calls
make and receive code calls in
LINCaround
To make a code call in LINCaround:
1 Push and hold the PTT button. Transmit appears on the first line of display. Begin speaking after your phone emits the
LINCaround tone.
2 Release the PTT button to listen.
Note: The tone emitted from your phone when using LINCaround is 4 beeps and sounds different from the standard tone heard with on-network Push To Talk and
Talkgroup calls.
You could receive an error message if there are no parties on your channel or code, or if you are out of range.
When you receive a code call using
LINCaround, Receive appears on the first line of the display.
Note: An incoming LINCaround call can be terminated at any time by pressing @.
make a private LINCaround call
1 Enter the 10-digit PTN of the person you want to call on your channel, or press - under Contacts and select a contact, or scroll to a number in the recent calls list.
2 Push and hold the PTT button. Begin speaking after your phone emits the
LINCaround tone.
3 Release the PTT button to listen.
The number or name of the person you are calling will appear in the first line of the display.
calls 51
receive a private LINCaround call
1 The number or name of the person who initiated the call will appear in the first line of the display.
2 You can reply within 6 seconds simply by pushing the PTT button.
end a private LINCaround call
A private LINCaround call will end if there is no communication for 6 seconds.
Note: A private LINCaround call may be interrupted during the 6 second idle time by another LINCaround code call or another private LINCaround call.
make emergency calls while in
LINCaround mode
If you attempt to make an Emergency 911 call while in LINCaround mode, your phone will automatically exit LINCaround mode and attempt to find a network signal.
Note: If you are out of network coverage your phone will not be able to make an emergency
911 cellular call until you go back into the network coverage area.
You must wait until the phone reconnects to the network before attempting to make an emergency 911 cellular call.
setup options
LINCaround setup options are available in the
LA Options screen in both network and
LINCaround modes.
52 calls
access setup options in network
Find it: / > LINCaround> Setup.
access setup options in LINCaround
Find it: / > LA Options > Setup.
The following options become available: option
Direct Launch
Launches your phone directly into
LINCaround when you select LINCaround from the main menu. If Direct Launch is set to
On, you will not see LA Options when you select LINCaround from the main menu. In order to have access to your setup options,
Direct Launch must be set to Off. Or you can access setup options while in LINCaround by pressing / and selecting LA Options.
option
State Tone
Notifies you periodically with a tone that you are in LINCaround mode. You can select a time frame during which you want to be notified that you are in LINCaround mode.
Select from 30 minutes, 1, 2, 3 or 4 hours.
calls 53
customize ring tones
To set the ring tone your phone makes when you receive phone calls, call alerts, message notifications, pictures sent in Push To Talk calls, or Datebook reminders:
Note: Only ring tones stored in your phone’s memory are available in the ring tones list.
Not all audio files can be assigned as ring tones.
Find it: / > Ring Tones
1 Make sure Vibrate All is set to Off.
2 Scroll through the list of ring tones and select the one you want to assign. Vibrate sets your phone to vibrate instead of making a sound; Silent sets your phone to neither vibrate nor make a sound.
Tip: Highlighting a ring tone lets you hear it.
3 Select the features you want to assign the ring tone to.
4 When you are finished, press Done.
Note: This icon , appears on the display if you set your phone to Silent. This icon 5 appears on the display if you set the phone to
Vibrate All.
set your phone to vibrate
You can set your phone to vibrate instead of making a sound when you receive all phone calls, Push To Talk calls, Talkgroup calls, call
54 customize
alerts, messages notifications, pictures sent in Push To Talk calls, and Datebook reminders.
Find it: / > Ring Tones > Vibrate All
1 Set this option to On or Locked.
Setting this option to On lets you turn Vibrate
All off by pressing the up volume control.
Setting this option to Locked requires you to press and hold the up volume control to turn Vibrate All off. The Locked option helps prevent you from accidentally turning
Vibrate All off.
To set Vibrate All to On or Locked using the volume controls: Press the volume controls to turn down the volume as far as possible to set
Vibrate All to On. Continue to hold the down volume control to set Vibrate All to Locked.
To set your phone to vibrate instead of making a sound for some features but not others:
Find it: / > Ring Tones
1 Make sure Vibrate All is set to Off.
2 Select Vibrate from the list of ring tones.
3 Select the features you want to set to make no sound.
4 When you are finished, press - under
Done.
wallpaper
Set a photo or picture as a wallpaper
(background) image in your phone’s home screen or throughout all menu screens.
Find it: / > Settings > Display/Info > Wallpaper >
Wallpaper.
To select a wallpaper image scroll through the list of pictures and press r to select the picture of your choice.
Note: You can set the wallpaper to change automatically after a certain period of time by customize 55
turning on the Auto Cycle feature located in the
Wallpaper menu.
backlight
Set the amount of time that the display and java apps. backlights remain on, or turn off the backlight feature to extend battery life.
Find it: / > Settings > Display/Info > Backlight
LED indicators
You can turn off the Bluetooth and messaging indicators on the external display.
Find it: / > Settings > Display/Info > Backlight >
Message LED > Off
datebook
Find it: / > Datebook > / > Setup
You can view or change these options: option
Start View: Sets Datebook to start in day view, week view, or month view when you access Datebook.
Daily Begin: Sets the beginning of your day.
This is the earliest time of day displayed in week view, if you have a 12-hour day view.
Delete After: Sets the amount of time
Datebook waits to delete an event after it occurs.
Time Shift: Lets you shift the times of all
Datebook events. This is useful if you are traveling to a different time zone.
Alert Timeout: Sets the amount of time a tone continues to sound when you receive a
Datebook reminder.
Clock: Controls whether the time and date appear on the home screen; sets time and date format.
56 customize
hide or show location information
Your phone is equipped with a Location feature for use in connection with locationbased services that may be available in the future.
The Location feature allows the network to detect your position. Turning Location off will hide your location from everyone except for your local emergency response center.
Note: Turning Location on will allow the network to detect your position using GPS technology, making some applications and services easier to use. Turning Location off will disable the GPS location function for all purposes except 911, but will not hide your general location based on the cell site serving your call. No application or service may use your location without your request or permission. GPS-enhanced 911 is not available in all areas.
set your privacy options
Find it: / > GPS > Privacy
Select Restricted, Unrestricted, or Ask Access.
customize 57
other features advanced calling
feature call waiting Find it: To accept the second call and put the active call on hold press
- under Yes.
To accept the second call and end the active call press
`.
Your phone rings with the second call for you to answer.
feature
3-way call Make or receive a phone call and press
/ > 3 Way. Enter the second phone number, press ` and - under Join.
Tip: For quick ways to enter the number, press / to see the dialing menu.
You cannot make any other calls after you have joined a
3-way call, even if one party disconnects.
58 other features - advanced calling
feature flip activation any key answer
To make your handset to answer and end calls by opening and closing the flip press / >
u
>
Phone Calls > Flip Activation.
Select Flip To Ans > On and Flip to End > On.
To answer phone calls by pressing any key on the keypad press / >
u
>
Phone Calls > Any Key Ans > On.
contacts
feature edit/delete contact entry
Press
- under Contacts.
Select a contact and press
/ > Edit. Change the desired content and press
- under Save.
set ringer ID Press - under Contacts.
Select a contact and press
/ > Edit > Ringer. Select desired ringer, press r, and - under Done.
other features - contacts 59
datebook
feature create datebook events see datebook event event reminder
To create a new Datebook event press / >
D
>
[New Event].
To see a calendar event press / >
D
navigation key left or right to see the day and up or down to see the events.
When an event reminder occurs press - under View.
Press - under Back to close the reminder.
feature receive datebook events via
Push To Talk
To view the information while still in the Push To Talk call press r.
The 5 most recent events received from a PTT ID are stored with that PTT ID on the recent calls list.
To store events to the
Datebook press
- under
Save while viewing the event you want to store.
60 other features - datebook
GPS
To improve GPS performance:
• Stay in the open,
• Move away from other electrical or electronic devices
• Remain stationary.
• Avoid covering the antenna with your hands.
feature view approximate location
To see your approximate location press / > GPS >
Position. Scroll to view the entire screen.
To recalculate position press
Rfrsh. This may take several minutes.
feature set GPS privacy options change GPS
PIN
To set the level of privacy for your GPS system press / >
GPS > Privacy.
If your GPS PIN security feature is enabled, enter your
GPS PIN and select the privacy option you want.
Note: Your default GPS PIN is
0000.
To change your GPS PIN press
/ > Settings > Security > Change
Passwds > GPS PIN.
Enter the current GPS PIN and enter the new 4- to 8-digit
GPS PIN. Re-enter the new 4- to 8-digit GPS PIN to confirm.
other features - GPS 61
handsfree
Note: The use of wireless phones while driving may cause distraction. Discontinue a call if you can't concentrate on driving.
Additionally, the use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products.
feature speakerphone
To activate the speakerphone while driving press and hold the speakerphone key s.
auto answer To automatically answer calls when connected to a car kit or headset press
/ > Settings > Phone Calls >
Auto Ans. Select the amount of rings before answering.
62 other features - handsfree
personalize
feature language backlight time length menu style
To set the language of your menu press / > Settings >
Display/Info > Language.
To select how long the display screen and keypad are backlit press / > Settings
> Display/Info > Backlight.
To show the Main Menu as graphic icons or a text-based list press / > Settings >
Display/Info > Menu View.
clock display To display the clock on your home screen press / >
Settings > Display/Info > Clock >
Display > On.
pc applications
feature other PC applications
For a list of complete PC applications visit www.motorola.com/support
TTY
feature turn On TTY feature choose TTY mode
From the home screen press / > Settings > Phone
Calls > TTY > Use TTY > On.
From the home screen press / > Settings >
Phone Calls > TTY > Type.
Select from TTY, VCO or HCO.
feature change the
TTY baud rate change TTY mode during a call
From the home screen press / > Settings > Phone
Calls > TTY > Baud.
Select 45.45 or 50.00.
While in the TTY call, press
/ > In Call Setup > TTY > Type.
Select from TTY, VCO or HCO.
security
feature phone lock To lock the phone press
/ > Settings > Security >
Phone Lock > Lock Now or
Auto Lock.
other features - pc applications 63
feature keypad lock To lock the keypad press
/ > Settings > Security >
Keypad Lock > Lock Now or
Auto Lock.
enable SIM
PIN change SIM
PIN
Shortcut: To lock the keypad press / > *.
To enable SIM PIN, press
/ > Settings > Security >
SIM PIN > On.
To change the SIM PIN, press / > Settings > Security >
Change Passwds > SIM PIN.
Note: You can make emergency calls on a
64 other features - security
Legal and Safety
Safety and General Information
This section contains important information on the safe and efficient operation of your mobile device. Read this information before using your integrated multi-service portable radio.*
Exposure to Radio Frequency (RF) Energy
Your mobile device contains a transmitter and receiver. When it is
ON, it receives and transmits RF energy. When you communicate with your phone, the system handling your call controls the power level at which your phone transmits.
Your mobile device is designed to comply with local regulatory requirements in your country concerning exposure of human beings to RF energy.
Portable Radio Product Operation and EME
Exposure
Your Motorola radio product is designed to comply with the following national and international standards and guidelines regarding exposure of human beings to radio frequency electromagnetic energy (EME):
66 Legal and Safety
• United States Federal Communications Commission, Code of Federal Regulations; 47 CFR part 2 sub-part J.
• American National Standards Institute (ANSI) / Institute of
Electrical and Electronics Engineers (IEEE). C95. 1-1992.
• Institute of Electrical and Electronics Engineers (IEEE).
C95. 1-2005 Edition.
*
• International Commission on Non-Ionizing Radiation
Protection (ICNIRP) 1998.
• Ministry of Health (Canada). Safety Code 6. Limits of
Human Exposure to Radio frequency Electromagnetic
Fields in the Frequency Range from 3 kHz to 300 GHz,
1999.
• Australian Communications Authority Radio communications (Electromagnetic Radiation - Human
Exposure) Standard 2003.
• ANATEL, Brazil Regulatory Authority, Resolution 303 (July
2, 2002) “Regulation of the limitation of exposure to
* The information provided in this document supersedes the general safety information in user’s guides published prior to May 1, 2006
electrical, magnetic, and electromagnetic fields in the radio frequency range between 9 kHz and 300 GHz.”
“Attachment to Resolution 303 from July 2, 2002."
Operational Precautions
For optimal mobile device performance, and to be sure that human exposure to RF energy does not exceed the guidelines set forth in the relevant standards, always follow these instructions and precautions.
Phone Operation
When placing or receiving a phone call, hold your mobile phone as you would a landline telephone. Speak directly into the
microphone.
Two-way radio operation
Your radio product has been designed and tested to comply with national and international standards and guidelines regarding human exposure to RF electromagnetic energy, when operated in the two-way mode (at the face, or at the abdomen when using an audio accessory) at usage factors of up to 50% talk/50% listen.
Transmit no more than the rated duty factor of 50% of the time. To transmit (talk), push the PTT button. To receive calls, release the
PTT button. Transmitting 50% of the time or less, is important because this radio generates measurable RF energy only when transmitting (in terms of measuring for standards compliance).
When using your radio product as a traditional two-way radio, hold the radio product in a vertical position with the microphone one to two inches (2.5 to 5 cm) away from the
lips.
If you wear the mobile device on your body, always place the mobile device in a Motorola approved clip, holder, holster, case or body harness. If you do not use a body-worn accessory supplied or approved by Motorola and are not using the mobile device in the intended use positions along side the head in the phone mode or in front of the face in the two-way radio mode, or if you hang your device from a lanyard around your neck, keep the device at least 2.5 centimeters (1 inch) from your body when transmitting.
Approved Accessories
For a list of approved Motorola accessories call 1-800-453-0920, or visit our website at www.motorola.com/phoneaccessories.
RF Energy Interference/Compatibility
Nearly every electronic device is subject to RF energy interference from external sources if inadequately shielded, designed or otherwise configured for RF energy compatibility. In some circumstances your mobile device may cause interference with other devices.
Legal and Safety 67
Follow Instructions to Avoid Interference
Problems
Turn OFF your mobile device in any location where posted notices instruct you to do so.
In an aircraft, turn off your mobile device whenever instructed to do so by airline staff. If your mobile device offers an airplane mode or similar feature, consult airline staff about using it in flight.
Implantable Medical Devices
If you have an implantable medical devices, such as a pacemaker or defibrillator, consult your physician before using this mobile device.
Persons with implantable medical devices should observe the following precautions:
• ALWAYS keep the mobile device more than 20 centimeters (8 inches) from the implantable medical device when the phone is turned ON.
• DO NOT carry the mobile device in the breast pocket;
• Use the ear opposite the implantable medical device to minimize the potential for interference.
• Turn OFF the mobile device immediately if you have any reason to suspect that interference is taking place.
Read and follow the directions from the manufacturer of your implantable medical device. If you have any questions about using your mobile device with your implantable medical device, consult your health care provider.
Hearing Aids
Some phones may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer or physician to discuss alternatives.
Other Medical Devices and Health Care Facilities
If you use any other personal medical devices, consult your physician or the manufacturer or your device to determine if it is adequately shielded from RF energy. Turn off your radio product when instructed to do so in hospitals or health care facilities that may be using equipment that is sensitive to external RF energy.
Caring for the Environment by
Recycling
This symbol on a Motorola product means the product should not be disposed of with household waste.
Disposal of your Mobile Device and Accessories
Please do not dispose of mobile devices or electrical accessories
(such as chargers, headsets, or batteries) with your household waste. These items should be disposed of in accordance with the national collection and recycling schemes operated by your local or
68 Legal and Safety
regional authority. Alternatively, you may return unwanted mobile devices and electrical accessories to any Motorola Approved
Service Center in your region. Details of Motorola approved national recycling schemes, and further information on Motorola recycling activities can be found at: www.motorola.com/recycling
Disposal of your Mobile Device Packaging and
User’s Guide
Product packaging and user’s guides should only be disposed of in accordance with national collection and recycling requirements.
Please contact your regional authorities for more details.
Driving Precautions
The use of wireless phones while driving may cause distraction.
Discontinue a call if you can’t concentrate on driving.
Additionally, the use of wireless devices and their accessories may be prohibited or restricted in certain areas. Always obey the laws and regulations on the use of these products.
Responsible driving practices can be found in the “Smart Practices
While Driving” section (see page 82).
Operational Warnings
Obey all posted signs when using Mobile devices in public areas.
Potentially Explosive Atmospheres
Areas with potentially explosive atmospheres are often but not always posted, and can include fueling areas such as below decks on boats, fuel or chemical transfer or storage facilities, or areas where the air contains chemicals or particles, such as grain, dust or metal powders.
When you are in such area, turn off your handset, and do not remove, install, or charge batteries unless it is a radio product type especially qualified for use in such areas as “Intrinsically Safe” (for example, Factory Mutual, CSA, or UL approved). In such areas, sparks can occur and cause an explosion or fire.
Symbol Key
Your battery, charger, or portable radio may contain symbols, defined as follows:
Symbol Definition
Important safety information follows.
Do not dispose of your battery or phone in a fire.
Legal and Safety 69
Symbol Definition
Your battery or phone may require recycling in accordance with local laws.
Contact your local regulatory authorities for more information.
Do not throw your battery or phone in the trash.
Your phone contains an internal lithium ion battery.
Do not let your battery, charger, or phone get wet.
Listening at full volume to music or voice through a headset may damage your hearing.
Batteries and Chargers
Caution: Improper treatment or use of batteries may present a danger of fire, explosion, leakage, or other hazard. For more information, see the “Battery Use and Battery Safety” section in this user’s guide.
Keep Your Mobile Device and Its Accessories
Away from Small Children
These products are not toys and may be hazardous to small children. For example:
• A choking hazard may exist for small, detachable parts.
• Improper use could result in loud sounds, possibly causing hearing injury.
• Improperly handled batteries could overheat and cause a burn.
Glass Parts
Some parts of your mobile device may be made of glass. This glass could break if the product is dropped on a hard surface or receives a substantial impact. If glass breaks, do not touch or attempt to remove. Stop using your mobile device until the glass is replaced by a qualified service center.
Seizures/Blackouts
Some people may be susceptible to epileptic seizures or blackouts when exposed to flashing lights, such as when playing video games. These may occur even if a person has never had a previous seizure or blackout.
If you have experienced seizures or blackouts, or if you have a family history of such occurrences, please consult with your physician before playing video games or enabling a flashing-lights feature (if available) on your mobile device.
70 Legal and Safety
Discontinue use and consult a physician if any of the following symptoms occur: convulsion, eye or muscle twitching, loss of awareness, involuntary movements, or disorientation. It is always a good idea to hold the screen away from your eyes, leave the lights on in the room, take a 15-minute break every hour, and stop use if you are very tired.
Caution About High Volume Usage
Warning: Warning: Exposure to loud noise from any source for extended periods of time may affect your hearing. The louder the volume sound level, the less time is required before your hearing could be affected. To protect your hearing:
• Limit the amount of time you use headsets or headphones at high volume.
• Avoid turning up the volume to block out noisy surroundings.
• Turn the volume down if you can’t hear people speaking near you.
If you experience hearing discomfort, including the sensation of pressure or fullness in your ears, ringing in your ears, or muffled speech, you should stop listening to the device through your headset or headphones and have your hearing checked.
For more information about hearing, see our Web site at
www.motorola.com/hearingsafety (in English only).
Repetitive Motion
When you repetitively perform actions such as pressing keys or entering finger-written characters, you may experience occasional discomfort in your hands, arms, shoulders, neck, or other parts of your body. If you continue to have discomfort during or after such use, stop use and see a physician.
Service and Repairs
If you have questions or need assistance, we’re here to help.
Go to www.motorola.com/support, where you can select from a number of customer care options. You can also contact the
Motorola Customer Support Center at 1 (800) 453-0920 (United
States), 1 (877) 483-2840 (TTY, TDD United States for hearing impaired).
Export Law Assurances
This product is controlled under the export regulations of the
United States of America and Canada. The Governments of the
United States of America and Canada may restrict the exportation or re-exportation of this product to certain destinations. For further information contact the U.S. Department of Commerce or the
Canadian Department of Foreign Affairs and International Trade.
Legal and Safety 71
Battery Use and Safety
• Motorola recommends you always use
Motorola-branded batteries and chargers. The warranty does not cover damage caused by non-Motorola batteries and/or chargers.
Caution: Use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazard.
Improper battery use, or use of a damaged battery, may result in a fire, explosion, or other hazard.
• Battery usage by children should be supervised.
• Important: Motorola mobile devices are designed to work best with qualified batteries. If you see a message on your display such as Invalid Battery or Unable to Charge, take the following steps:
• Remove the battery and inspect it to confirm it bears a
Motorola “Original Equipment” hologram;
• If there is no hologram, the battery is not a qualified battery;
• If there is a hologram, replace the battery and retry charging it;
• If the message remains, contact a Motorola Authorized
Service Center.
• When storing your battery, keep it in a cool, dry place.
• It is normal over time for battery life to decrease, and for the battery to exhibit shorter runtime between charges or require more frequent or longer charging times.
Important: Handle and store batteries properly to avoid
injury or damage. Most battery issues arise from improper handling of batteries, and particularly from the continued use of damaged batteries.
DON’Ts
• Don’t disassemble, crush, puncture, shred, or otherwise attempt to change the form of your battery.
• Don’t let the phone or battery come in contact with
water. Water can get into the phone’s circuits, leading to corrosion. If the phone and/or battery get wet, have them checked by your carrier or contact Motorola, even if they appear to be working properly.
• Don’t allow the battery to touch metal objects. If metal objects, such as jewelry, stay in prolonged contact with the battery contact points, the battery could become very hot.
• Don’t place your battery near a heat source.
Excessive heat can damage the phone or the battery. High temperatures can cause the battery to swell, leak, or malfunction. Therefore:
• Do not dry a wet or damp battery with an appliance or heat source, such as a hair dryer or microwave oven.
72 Legal and Safety
DOs
• Avoid leaving your phone in your car in high temperatures.
• Do avoid dropping the battery or phone. Dropping these items, especially on a hard surface, can potentially cause damage.
• Do contact your service provider or Motorola if your phone or battery has been damaged from dropping or high temperatures.
Important: Use Motorola Original products for quality
assurance and safeguards. To aid consumers in identifying authentic Motorola batteries from non-original or counterfeit batteries (that may not have adequate safety protection), Motorola provides holograms on its batteries. Consumers should confirm that any battery they purchase has a “Motorola Original” hologram.
Motorola recommends you always use Motorola-branded
batteries and chargers. Motorola mobile devices are designed to work with Motorola batteries. If you see a message on your display such as Invalid Battery or Unable to Charge, take the following steps:
• Remove the battery and inspect it to confirm that it has a
“Motorola Original” hologram;
• If there is no hologram, the battery is not a Motorola battery;
• If there is a hologram, replace the battery and retry charging it;
• If the message remains, contact a Motorola authorized service center.
Important: Motorola’s warranty does not cover damage to the phone caused by non-Motorola batteries and/or chargers.
Warning: Use of a non-Motorola battery or charger may present a risk of fire, explosion, leakage, or other hazard.
Proper and safe battery disposal and recycling: Proper battery disposal is not only important for safety, it benefits the environment. Consumers may recycle their used batteries in many retail or service provider locations. Additional information on proper disposal and recycling may be found on the Web:
• www.motorola.com/recycling
• www.rbrc.org/call2recycle/ (in English only)
Disposal: Promptly dispose of used batteries in accordance with local regulations. Contact your local recycling center or national recycling organizations for more information on how to dispose of batteries.
Warning: Never dispose of batteries in a fire because they may explode.
Battery Charging
Notes for charging your phone’s battery:
• When charging your battery, keep it near room temperature. Never expose batteries to temperatures below 0°C (32°F) or above 45°C (113°F) when charging.
Legal and Safety 73
• New batteries are not fully charged.
• New batteries or batteries stored for a long time may take more time to charge.
• Motorola batteries and charging systems have circuitry that protects the battery from damage from overcharging.
Specific Absorption Rate
Your model wireless phone meets the governmental requirements for exposure to radio waves.
Your mobile device is a radio transmitter and receiver. It is designed and manufactured to not exceed limits for exposure to radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. Government and by the Canadian regulatory authorities. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed for the safety of all persons, regardless of age or health, and to account for any variations in measurements.
The exposure standard for mobile devices employs a unit of measurement known as the Specific Absorption Rate (SAR). The
SAR limit set by the FCC and by the Canadian regulatory authorities is 1.6 watts per kilogram (W/kg), averaged over one gram of tissue. Tests for SAR are conducted using procedures
74 Legal and Safety accepted by the FCC and by Industry Canada with the mobile device transmitting at its highest certified power level in all tested frequencies. Although the SAR is determined at the highest certified power level, the actual SAR level of the mobile device while operating can be below the maximum value. This is because the mobile device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station, the lower the power output.
Before a mobile device is available for sale to the public in the U.S. and Canada, it must be tested and certified to the FCC and Industry
Canada that it does not exceed the limit established by each government for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) submitted to the FCC and available for review by Industry Canada.
The highest SAR value for this mobile device when tested for use at the ear is 0.72 W/kg, and when worn on the body, as described in this guide, is 1.03 W/kg. Body-worn measurements can differ, depending upon available accessories and regulatory requirements. The SAR information includes the Motorola testing protocol, assessment procedure, and measurement uncertainty range for this product.
While there may be differences between the SAR levels of various mobile devices and at various positions, they meet the governmental requirements for safe exposure. Please note that improvements to this product model could cause differences in the
SAR value for later products; in all cases, products are designed to be within the guidelines.
Additional information on SAR can be found on the Cellular
Telecommunications & Internet Association (CTIA) Web site: http://www.phonefacts.net
or the Canadian Wireless Telecommunications Association (CWTA)
Web site: http://www.cwta.ca
AGPS and Emergency Calls
When you make an emergency call, your mobile device can use
Assisted Global Positioning System (AGPS) satellite signals to tell the emergency response center your approximate location.
The AGPS feature has limitations, so always tell the emergency response center your best knowledge of your location. Remain on the phone for as long as the emergency response center instructs you.
AGPS might not work for emergency calls, if your local emergency response center does not process AGPS location information. For details, contact your local authorities.
If your mobile device cannot find strong AGPS satellite signals, the location of the nearest cell tower in contact with your mobile device is automatically provided to the emergency response center.
AGPS Performance Tips
• Go outside and away from underground locations, covered vehicles, structures with metal or concrete roofs, tall buildings, and foliage. Indoor performance might improve if you move closer to windows, but some window sun shielding films can block satellite signals.
• Move away from radios, entertainment equipment, and other electronic devices that might interfere with or block
AGPS satellite signals.
AGPS uses satellites controlled by the U.S. government and subject to changes implemented in accordance with the
Department of Defense AGPS user policy and the Federal Radio
Navigation Plan. These changes might affect AGPS performance.
Motorola Limited Warranty for the
United States and Canada
What Does this Warranty Cover?
Note: FOR IDEN SUBSCRIBER PRODUCTS, ACCESSORIES
AND SOFTWARE PURCHASED IN THE UNITED STATES OR
CANADA
Subject to the exclusions contained below, Motorola, Inc. warrants its Motorola iDEN Digital Mobile and Portable Handsets
("Products"), Motorola-branded or certified accessories sold for use with these Products ("Accessories") and Motorola software
Legal and Safety 75
contained on CD-Roms or other tangible media and sold for use with these Products ("Software") to be free from defects in materials and workmanship under normal consumer usage for the period(s) outlined below. This limited warranty is a consumer's exclusive remedy, and applies as follows to new Products, Accessories and Software purchased by consumers in the United States or Canada, which are accompanied by this written warranty:
Products Covered
Products as defined above.
Accessories as defined above.
Products or
Accessories that are
Repaired or
Replaced.
Software as defined above. Applies only to physical defects in the media that embodies the copy of the software
(e.g. CD-ROM, or floppy disk).
Length of Coverage
One (1) year from the date of purchase by the first consumer purchaser of the product.
One (1) year from the date of purchase by the first consumer purchaser of the product.
The balance of the original warranty or for ninety (90) days from the date returned to the consumer, whichever is longer.
Ninety (90) days from the date of purchase.
76 Legal and Safety
What is not covered? (Exclusions)
Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage.
Ornamental Decorations. Ornamental decorations such as emblems, graphics, rhinestones, jewels, gemstones and their settings, and other decorative elements, are excluded from coverage.
Batteries. Only batteries whose fully charged capacity falls below
80% of their rated capacity and batteries that leak are covered by this limited warranty.
Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.) to the surface of the product resulting from misuse; (b) contact with liquid, water, rain, extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c) use of the Products or Accessories for commercial purposes or subjecting the Product or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault of Motorola, are excluded from coverage.
Use of Non-Motorola Products and Accessories. Defects or damage that result from the use of Non-Motorola branded or certified Products, Accessories, Software or other peripheral equipment are excluded from coverage.
Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, including without limitation, software
changes, or modification in any way by someone other than
Motorola, or its authorized service centers, are excluded from coverage.
Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering;
(c) mismatched board serial numbers; or (d) nonconforming or non-Motorola housings, antennas, or parts, are excluded from coverage.
Communication Services. Defects, damages, or the failure of
Products, Accessories or Software due to any communication service or signal you may subscribe to or use with the Products,
Accessories or Software is excluded from coverage.
Software Embodied in Physical Media. No warranty is made that the software will meet your requirements or will work in combination with any hardware or software applications provided by third parties, that the operation of the software products will be uninterrupted or error free, or that all defects in the software products will be corrected.
Software NOT Embodied in Physical Media. Software that is not embodied in physical media (e.g. software that is downloaded from the internet), is provided "as is" and without warranty.
Who is covered? This warranty extends only to the first consumer purchaser, and is not transferable.
What will Motorola Do? Motorola, at its option, will at no charge repair, replace or refund the purchase price of any Products,
Accessories or Software that does not conform to this warranty.
We may use functionally equivalent reconditioned/refurbished/pre-owned or new Products,
Accessories or parts. No data, software or applications added to your Product, Accessory or Software, including but not limited to personal contacts, games and ringer tones, will be reinstalled. To avoid losing such data, software and applications please create a back up prior to requesting service.
How to Obtain Warranty Service or Other Information? To obtain service or information, please call:
Motorola iDEN Customer Services 1-800-453-0920 or
954-723-4910
TTY-877-483-2840
Or visit us online at http://www.motorola.com/iden
You will receive instructions on how to ship the Products,
Accessories or Software, at your expense, to a Motorola
Authorized Repair Center. To obtain service, you must include: (a) a copy of your receipt, bill of sale or other comparable proof of purchase; (b) a written description of the problem; (c) the name of your service provider, if applicable; (d) the name and location of the installation facility (if applicable) and, most importantly; (e) your address and telephone number.
What Other Limitations Are There? ANY IMPLIED
WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF
THIS LIMITED WARRANTY, OTHERWISE THE REPAIR,
REPLACEMENT, OR REFUND AS PROVIDED UNDER THIS EXPRESS
Legal and Safety 77
LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER
WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL
MOTOROLA BE LIABLE, WHETHER IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE
PURCHASE PRICE OF THE PRODUCT, ACCESSORY OR SOFTWARE,
OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF
REVENUE OR PROFITS, LOSS OF BUSINESS, LOSS OF
INFORMATION OR DATA, SOFTWARE OR APPLICATIONS OR
OTHER FINANCIAL LOSS ARISING OUT OF OR IN CONNECTION
WITH THE ABILITY OR INABILITY TO USE THE PRODUCTS,
ACCESSORIES OR SOFTWARE TO THE FULL EXTENT THESE
DAMAGES MAY BE DISCLAIMED BY LAW.
Some states and jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state or from one jurisdiction to another.
Laws in the United States and other countries preserve for
Motorola certain exclusive rights for copyrighted Motorola software such as the exclusive rights to reproduce and distribute copies of the Motorola software. Motorola software may only be copied into, used in, and redistributed with, the Products associated with such Motorola software. No other use, including without limitation disassembly of such Motorola software or exercise of the exclusive rights reserved for Motorola, is permitted.
Patent and Software Provisions:
MOTOROLA will defend, at its own expense, any suit brought against the end user purchaser to the extent that it is based on a claim that the Product or parts infringe a patent, and Motorola will pay those costs and damages finally awarded against the end user purchaser in any such suit which are attributable to any such claim, but such defense and payments are conditioned on the following:
• That MOTOROLA will be notified promptly in writing by such purchaser of any notice of such claim;
• That MOTOROLA will have sole control of the defense of such suit and all negotiations for its settlement or compromise; and
• Should the Product or parts become, or in MOTOROLA’S opinion be likely to become, the subject of a claim of infringement of a patent, that such purchaser will permit
MOTOROLA, at its option and expense, either to procure for such purchaser the right to continue using the Product or parts or to replace or modify the same so that it becomes non infringing or to grant such purchaser a credit for the Product or parts as depreciated and accept its return. The depreciation will be an equal amount per year over the lifetime of the Product or parts as established by
MOTOROLA.
78 Legal and Safety
MOTOROLA will have no liability with respect to any claim of patent infringement which is based upon the combination of the
Product or parts furnished hereunder with software, apparatus or devices not furnished by MOTOROLA, nor will MOTOROLA have any liability for the use of ancillary equipment or software not furnished by MOTOROLA which is attached to or sued in connection with the Product or any parts thereof. In no event shall
MOTOROLA be liable for any incidental, special or consequential damages arising from any claim of patent infringement or alleged infringement.
Laws in the United States and other countries preserve for
MOTOROLA certain exclusive rights for copyrighted MOTOROLA software, such as the exclusive rights to reproduce in copies and distribute copies of such MOTOROLA software. MOTOROLA software may be used in only the Product in which the software was originally embodied and such software in such Product may not be replaced, copied, distributed, modified in any way, or used to produce any derivative thereof. No other use including, without limitation, alteration, modification, reproduction, distribution, or reverse engineering of such MOTOROLA software or exercise or rights in such MOTOROLA software is permitted. No license is granted by implication, estoppel or otherwise under MOTOROLA patent rights or copyrights.
Hearing Aid Compatibility With Mobile
Phones
Some Motorola phones are measured for compatibility with hearing aids. If the box for your particular model has “Rated for
Hearing Aids” printed on it, the following explanation applies.
When some mobile phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and phones also vary in the amount of interference they generate.
The wireless telephone industry has developed ratings for some of their mobile phones, to assist hearing device users in finding phones that may be compatible with their hearing devices. Not all phones have been rated. Phones that are rated have the rating on their box or a label on the box.
The ratings are not guarantees. Results will vary depending on the user’s hearing device and hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings.
Legal and Safety 79
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing device’s telecoil (“T
Switch” or “Telephone Switch”) than unrated phones. T4 is the better/higher of the two ratings. (Note that not all hearing devices have telecoils in them.)
Hearing devices may also be measured for immunity to this type of interference. Your hearing device manufacturer or hearing health professional may help you find results for your hearing device. The more immune your hearing aid is, the less likely you are to experience interference noise from mobile phones.
Information From the World Health
Organization
Present scientific information does not indicate the need for any special precautions for the use of mobile phones. If you are concerned, you may want to limit your own or your children’s RF exposure by limiting the length of calls or by using hands-free devices to keep mobile phones away from your head and body.
Source: WHO Fact Sheet 193
Further information: http://www.who.int./peh-emf.
Product Registration
Online Product Registration: www.motorola.com/us/productregistration
80 Legal and Safety
Product registration is an important step toward enjoying your new
Motorola product. Registering permits us to contact you for product or software updates and allows you to subscribe to updates on new products or special promotions. Registration is not required for warranty coverage.
Please retain your original dated sales receipt for your records. For warranty service of your Motorola Personal Communications
Product you will need to provide a copy of your dated sales receipt to confirm warranty status.
Thank you for choosing a Motorola product.
Wireless: The New Recyclable
Your wireless phone can be recycled. Recycling your phone reduces the amount of waste disposed in landfills and allows recycled materials to be incorporated into new products.
The Cellular Telecommunications Industry Association (CTIA) and its members encourage consumers to recycle their phones and have taken steps to promote the collection and environmentally sound recycling of end-of-life devices.
As a phone user, you have an important role in ensuring that this device is recycled properly. When it comes time to give this phone up or trade it in for a new one, please remember that the phone, the charger, and many of its accessories can be recycled. It's easy.
To learn more about CTIA's Recycling Program for Used Wireless
Devices, please visit us at: http://recycling.motorola.young-america.com/ index.html
California Perchlorate Label
Some mobile phones use an internal, permanent backup battery on the printed circuit board that may contain very small amounts of perchlorate. In such cases, California law requires the following label:
Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
There is no special handling required by consumers.
Patent and Trademark Information
MOTOROLA, the Stylized M Logo and all other trademarks indicated as such herein are trademarks of Motorola, Inc. ® Reg.
U.S. Pat. & Tm. Off. © 2009 Motorola, Inc. All rights reserved.
Microsoft and Microsoft Internet Explorer are registered trademarks of Microsoft Corporation.
T9 is a trademark owned by Tegic Communications.
T9
®
Text Input Patent and Trademark Information.
This product is covered by U.S. Pat. 5,818,437, U.S. Pat. 5,953,541,
U.S. Pat. 6,011,554 and other patents pending.
Java and all other Java-based marks are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S. and other countries.
All other product names or services mentioned in this manual are the property of their respective trademark owners.
Software Copyright Notice
Motorola products may include copyrighted Motorola and third party software stored in semiconductor memories or other media.
Laws in the United States and other countries preserve for
Motorola and third party software providers certain exclusive rights for copyrighted software, such as the exclusive rights to distribute or reproduce the copyrighted software. Accordingly, any copyrighted software contained in the Motorola products may not be modified, reverse-engineered, distributed, or reproduced in any manner to the extent allowed by law. Furthermore, the purchase of
Motorola products shall not be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents, or patent applications of Motorola or any third party software provider, except for the normal, non-exclusive, royalty-free license to use that arises by operation of law in the sale of a product.
Privacy and Data Security
Motorola understands that privacy and data security are important to everyone. Because some features of your mobile device may affect your privacy or data security, please follow these recommendations to enhance protection of your information:
• Monitor access—Keep your mobile device with you and do not leave it where others may have unmonitored access. Lock your device’s keypad where this feature is available.
Legal and Safety 81
• Keep software up to date—If Motorola or a software/application vendor releases a patch or software fix for your mobile device that updates the device’s security, install it as soon as possible.
• Erase before recycling—Delete personal information or data from your mobile device prior to disposing of it or turning it in for recycling. For instructions on how to delete all personal information from your device, please contact your local service provider.
• Understanding AGPS—To provide location information for emergency calls, certain Motorola mobile devices incorporate Assisted Global Positioning System (AGPS) technology. AGPS technology also can be used in non-emergency applications to track and monitor a user’s location—for example, to provide driving directions. Users who prefer not to permit such tracking and monitoring should avoid using such applications.
If you have further questions regarding how the use of your mobile device may impact your privacy or data security, please contact
Motorola at [email protected], or contact your service provider.
Smart Practices While Driving
Drive Safe, Call Smart
SM
Check the laws and regulations on the use of phones and their accessories in the areas where you drive. Always
82 Legal and Safety obey them. The use of these devices may be prohibited or restricted in certain areas—for example handsfree use only. Go to www.motorola.com/callsmart (in English only) for more information.
Your mobile device lets you communicate by voice and data—almost anywhere, anytime, wherever wireless service is available and safe conditions allow. When driving a car, driving is your first responsibility. If you choose to use your phone while driving, remember the following tips:
• Get to know your Motorola mobile device and its
features such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.
• When available, use a handsfree
device. If possible, add an additional layer of convenience to your phone with one of the many Motorola Original handsfree accessories available today.
• Position your mobile device within easy reach. Be able to access your phone without removing your eyes from the road. If you receive an incoming call at an inconvenient time, if possible, let your voice mail answer it for you.
• Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy
traffic or hazardous weather conditions. Rain, sleet, snow, ice, and even heavy traffic can be hazardous.
• Do not take notes or look up phone numbers while
driving. Jotting down a “to do” list or going through your address book takes attention away from your primary responsibility, driving safely.
• Dial sensibly and assess the traffic; if possible, place calls when your car is not moving or before
pulling into traffic. If you must make a call while moving, dial only a few numbers, check the road and your mirrors, then continue.
• Do not engage in stressful or emotional
conversations that may be distracting. Make people you are talking with aware you are driving and suspend conversations that can divert your attention away from the road.
• Use your mobile device to call for help. Dial 911 or other local emergency number in the case of fire, traffic accident, or medical emergencies (wherever wireless phone service is available).
• Use your mobile device to help others in
emergencies. If you see an auto accident, crime in progress, or other serious emergency where lives are in danger, call 911 or other local emergency number
(wherever wireless phone service is available), as you would want others to do for you.
• Call roadside assistance or a special non-emergency wireless assistance number when
necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency wireless number (wherever wireless phone service is available).
Legal and Safety 83
index
A
alert
B
84 index
C call
combined power/end/home key 13, 14
D
datebook 59 receive events via PTT 59
E
F frequently asked questions
G
GPS enabled
H
I
L
M
Memory
Message center
modem
N
O
optional accessory 8, 61 optional feature 8
P
private calls
Q quick notes
index 85
R
received calls 41 recent calls 41
ring style
ring tones
off 53 setting 53 vibrate 53, 54
S safety
86 index
change SIM PIN 63 enable SIM PIN 63
T talkgroup calls
message center 19 receiving 19
V voice mail
W
Y
index 87
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project