MINI COMPONENT SYSTEM
Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please
read this manual carefully. It will guide you in operating
your SHARP product.
CD-XP120W Mini Component System consisting of CDXP120W (main unit) and CP-XP120 (speaker system).
MODEL
CD-XP120W
OPERATION MANUAL
CDXP120WA_FRONT
Downloaded From Disc-Player.com Sharp Manuals
1
02.5.27, 11:35 AM
CD-XP120W
- Introduction / Special notes -
Important Instruction
ENGLISH
Special notes
Warning:
! When the ON/STAND-BY button is set at STAND-BY position,
mains voltage is still present inside the unit. When the ON/
STAND-BY button is set at STAND-BY position, the unit may be
brought into operation by the timer mode or remote control.
! This unit contains no user serviceable parts. Never remove covers unless qualified to do so. This unit contains dangerous voltages, always remove mains plug from the socket before any
service operation and when not in use for a long period.
! To prevent fire or shock hazard, do not expose this appliance to
dripping or splashing. No objects filled with liquids, such as
vases, should be placed on the apparatus.
CAUTION
! This product is classified as a CLASS 1 LASER product.
! Use of controls, adjustments or performance of procedures other
than those specified herein may result in hazardous radiation exposure.
As the laser beam used in this compact disc player is harmful to
the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.
Laser Diode Properties
Material: GaAIAs
Wavelength: 780 nm
Emission Duration: continuous
Laser Output: max. 0.6 mW
Note for users in Australia:
Copyright may exist in material you wish to record. Copying or
broadcasting such material without permission of the relevant licensees or owners of the copyright is prohibited by law. SHARP is
not in a position to authorise the copying or broadcasting of copyright materials and nothing in this OPERATION MANUAL should be
implied as giving that authority.
For other countries:
Audio-visual material may consist of copyrighted works which must
not be recorded without the authority of the owner of the copyright.
Please refer to the relevant laws in your country.
E-1
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)1.fm
Accessories
CD-XP120W
ENGLISH
Please confirm that the following accessories are included.
AM loop aerial 1
FM aerial 1
AC power lead 1
Note:
Only the above accessories are included.
Contents
" General Information
Page
Page
" Tape Playback
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 - 6
TAPE 1 or TAPE 2 playback . . . . . . . . . . . . . . . . . . . . . . . . 19, 20
Continuous playback (TAPE 2 to TAPE 1) . . . . . . . . . . . . . . . 20
" Preparation for Use
" Karaoke
System connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 - 10
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Playing karaoke . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
" Basic Operation
" Tape Recording
Sound control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Setting the clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
" CD Playback
Listening to a CD (CDs) . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 - 16
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Programmed play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
" Radio
Tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Memorising a station . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
To recall a memorised station . . . . . . . . . . . . . . . . . . . . . . . . . 19
Recording from a CD (CDs) . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recording from the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dubbing from tape to tape . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Erasing recorded tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
22
23
23
23
- Accessories / Contents -
"AA" size battery (UM/
SUM-3, R6, HP-7 or
similar) 2
General Information
Remote control 1
" Advanced Features
Timer and sleep operation . . . . . . . . . . . . . . . . . . . . . . . . . 24, 25
" References
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26, 27
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Headphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
E-2
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)1.fm
CD-XP120W
ENGLISH
Precautions
" General
! Please ensure that the equipment is positioned in a well ventilated area and ensure that there is at least 10 cm (4") of free
space along the sides, top and back of the equipment.
10 cm (4")
10 cm (4")
10 cm (4")
- Precautions -
10 cm (4")
General Information
! No naked flame sources, such as lighted candles, should be
placed on the apparatus.
! Attention should be drawn to the environmental aspects of battery disposal.
! This unit should only be used within the range of 5°C - 35°C
(41°F - 95°F).
! Use the unit on a firm, level surface free from vibration.
! Keep the unit away from direct sunlight, strong magnetic fields,
excessive dust, humidity and electronic/electrical equipment
(home computers, facsimiles, etc.) which generates electrical
noise.
! Do not place anything on top of the unit.
! Do not expose the unit to moisture, to temperatures higher than
60°C (140°F) or to extremely low temperatures.
! If your system does not work properly, disconnect the AC power
lead from the wall socket. Plug the AC power lead back in, and
then turn on your system.
! In case of an electrical storm, unplug the unit for safety.
! Hold the AC power plug by the head when removing it from the
wall socket, as pulling the lead can damage internal wires.
! Do not remove the outer cover, as this may result in electric
shock. Refer internal service to your local SHARP service
facility.
! The ventilation should not be impeded by covering the ventilation
openings with items, such as newspapers, tablecloths, curtains,
etc.
Warning:
The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than that which is
specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not be held responsible for any
damage resulting from use of this unit with a voltage other than that
which is specified.
" Volume control
The sound level at a given volume setting depends on speaker efficiency, location, and various other factors. It is advisable to avoid
exposure to high volume levels. Do not turn the volume on to full at
switch on and listen to music at moderate levels.
E-3
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)1.fm
Controls and indicators
CD-XP120W
2
3
13
14
15
16
17
4
5
6
7
8
9
10
11
18
19
20
12
21
22 23 24 25 26 27
28 29 30 31
- Controls and indicators -
1
Reference page
1. Disc Tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2. Timer Set Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
3. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 22
6. CD Track Down or Fast Reverse,
Tuner Preset Down Button . . . . . . . . . . . . . . . . . . . . . . 15, 19
7. Headphone Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
8. CD Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
9. CD Play or Repeat Button . . . . . . . . . . . . . . . . . . . . . . . 14, 16
10. Microphone Level Control . . . . . . . . . . . . . . . . . . . . . . . . . . 21
11. Microphone Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
12. Tape 1 Cassette Compartment . . . . . . . . . . . . . . . . . . . 20, 23
13. Tape Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 23
14. CD Track Up or Fast Forward,
Tuner Preset Up Button . . . . . . . . . . . . . . . . . . . . . . . . . 15, 19
15. Equaliser Mode Select/Extra Bass/
Demo Mode Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 12
16. Disc Tray Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . 14
17. Disc Skip Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
18. Volume Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . 12
19. Tuning Up Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
20. Tuning Down Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
21. Tape 2 Cassette Compartment . . . . . . . . . . . . . . . . . . . 20, 23
22. Tape 1 Record Button . . . . . . . . . . . . . . . . . . . . . . . . . . 22, 23
23. Tape 1 Play Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
24. Tape 1 Rewind Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
25. Tape 1 Fast Forward Button . . . . . . . . . . . . . . . . . . . . . . . . 20
26. Tape 1 Stop/Eject Button . . . . . . . . . . . . . . . . . . . . . . . . . . 20
27. Tape 1 Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
28. Tape 2 Play Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
29. Tape 2 Rewind Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
30. Tape 2 Fast Forward Button . . . . . . . . . . . . . . . . . . . . . . . . 20
31. Tape 2 Stop/Eject Button . . . . . . . . . . . . . . . . . . . . . . . . . . 20
General Information
ENGLISH
" Front panel
E-4
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)1.fm
CD-XP120W
Controls and indicators (continued)
ENGLISH
" Display
1 2 34
11 12
13
14
5
6
- Controls and indicators -
General Information
7
8
9 10
15
3
1
2
4
5
6
7
8
1. CD Play Indicator
2. CD Repeat Play Indicator
3. FM Station Indicator
4. AM Station Indicator
5. Disc Number Indicators
6. Clock Indicator
7. Sleep Indicator
8. Timer Play Indicator
9. Tape 1 Record Indicator
10. CD Pause Indicator
11. FM Stereo Mode Indicator
12. FM Stereo Receiving Indicator
13. Memory Indicator
14. CD Random Play Indicator
15. Extra Bass Indicator
" Rear panel
Reference page
1. AC Voltage Selector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2. AC Power Input Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3. Transport Screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8, 27
4. FM 75 Ohms Aerial Terminal . . . . . . . . . . . . . . . . . . . . . . . 7, 8
5. FM Aerial Earth Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 8
6. AM Loop Aerial Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 8
7. Span Selector Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
8. Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 8
1
2
" Speaker system
3
4
1. Tweeter
2. Woofer
3. Bass Reflex Duct
4. Speaker Wire
E-5
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)1.fm
CD-XP120W
2
3
4
13
14
5
15
16
6
7
8
9
10
11
12
17
18
19
20
Reference page
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . 14, 17, 22
3. CD Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4. Memory/Set Button . . . . . . . . . . . . . . . . . . . . . . . . . 13, 17, 19
5. Clear Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
6. CD Random Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
7. Clock Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 24
8. Equaliser Mode Select Button . . . . . . . . . . . . . . . . . . . . . . . . 12
9. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
10. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 22
11. On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
12. Extra Bass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
13. CD Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
14. CD Play or Repeat Button . . . . . . . . . . . . . . . . . . . . . . . . 14, 16
15. CD Track Up or Fast Forward,
Tuner Preset Up Button . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 19
16. CD Track Down or Fast Reverse,
Tuner Preset Down Button . . . . . . . . . . . . . . . . . . . . . . . . 15, 19
17. Timer Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
18. Sleep Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
19. Tape Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 23
20. Volume Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . . . 12
Buttons with " " mark in the illustration can be operated on the remote control only.
- Controls and indicators -
1
ENGLISH
General Information
! Remote control
E-6
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)1.fm
CD-XP120W
System connections
ENGLISH
AM loop aerial
Transport
screw
Right speaker
Left speaker
- System connections -
Preparation for Use
FM aerial
Wall socket
(See page 9.)
E-7
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)1.fm
CD-XP120W
ENGLISH
! Removing the transport screw
! Speaker connection
Before turning the power on, be sure to remove the transport screw
on the back of the unit using a flat head screwdriver or a coin.
Note:
This screw is required when transporting the unit again. Please
keep it (see page 27).
Connect the wire with the white line to the minus (-) terminal and the
plain wire to the plus (+) terminal.
Right speaker
Left speaker
Wall Screws (not supplied)
External FM aerial:
Use an external FM aerial if you require better reception. Consult
your dealer.
External
FM aerial
75 ohm
coaxial
cable
Plain
White line
Caution:
" Use speakers with an impedance of 8 ohms or
more, as lower impedance speakers can damage
the unit.
" Do not mistake the right and the left channels. The
right speaker is the one on the right side when you
face the unit.
" Do not let the bare speaker wires touch each
other.
" Do not allow any objects to fall into or to be placed
in the bass reflex ducts.
" Do not stand or sit on the speakers. You may be injured.
- System connections -
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS terminal and position the FM aerial wire in the direction where the strongest signal
can be received.
Supplied AM loop aerial:
Connect the AM loop aerial to the AM LOOP socket. Position the
AM loop aerial for optimum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
< Assembling >
< Attaching to the wall >
Preparation for Use
! Aerial connection
Incorrect
Note:
The speaker grilles are not removable.
Note:
When an external FM aerial is used, disconnect the supplied FM
aerial wire.
E-8
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)1.fm
CD-XP120W
System connections (continued)
ENGLISH
! Setting the AC voltage selector
Check the setting of the AC voltage selector located on the rear
panel before plugging the unit into a wall socket. If necessary, adjust
the selector to correspond to the AC power voltage used in your
area.
Turn the selector with a screwdriver until the appropriate voltage number appears in the window (110 V, 127 V, 220 V or 230
V - 240 V AC).
! Connecting the AC power lead
- System connections -
Preparation for Use
230V
240V
Wall socket
(230 - 240 V, 50/60 Hz)
After checking all the connections have been made correctly, connect the AC power lead to the AC power input socket, then plug the
AC power lead of this unit into the wall socket. If you plug in the unit
first, the unit will enter the demonstration mode (see page 10).
Notes:
" Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
" Never use a power lead other than the one supplied. Otherwise,
a malfunction or an accident may occur.
E-9
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)1.fm
CD-XP120W
ENGLISH
! Setting the FM/AM span selector
! Demonstration mode
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
Note:
When the power is on, the EQUALIZER/X-BASS/DEMO button can
be used to select the pre-programmed equaliser and extra bass
modes.
The International Telecommunication Union (ITU) has established
that member countries should maintain either a 100 kHz or a 50 kHz
interval between broadcasting frequencies of FM stations and 10
kHz or 9 kHz for AM station. The illustration shows the 50/9 kHz
zones (regions 1 and 3), and the 100/10 kHz zone (region 2).
Before using the unit, set the SPAN SELECTOR switch (on the rear
panel) to the interval (span) of your area.
To change the tuning zone:
1 Press the ON/STAND-BY button to enter the stand-by mode.
2 Set the SPAN SELECTOR switch (on the rear panel) as follows.
" For 100 kHz FM interval (10 kHz in AM) 100/10
" For 50 kHz FM interval (9 kHz in AM) 50/9
3 Whilst pressing down the TUNER (BAND) button and the DISC
SKIP button, press the ON/STAND-BY button until "CLEAR" appears.
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
- System connections -
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the EQUALIZER/X-BASS/DEMO button again.
Preparation for Use
To cancel the demonstration mode:
When the unit is in the power stand-by mode (demonstration mode),
press the EQUALIZER/X-BASS/DEMO button. The demonstration
mode will be cancelled and the display will disappear.
! To turn the power on
Press the ON/STAND-BY button to turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
E-10
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)1.fm
CD-XP120W
ENGLISH
Remote control
! Battery installation
! Test of the remote control
1
2
Check the remote control after checking all connections have been
made correctly. (See pages 7 - 9.)
Point the remote control directly at the remote sensor on the unit.
3
Remove the battery cover.
Insert the batteries according to the direction indicated in
the battery compartment.
When inserting or removing the batteries, push them towards the
battery terminals.
Replace the cover.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now,
you can enjoy music.
- Remote control -
Preparation for Use
Remote sensor
0.2 m - 6 m
(8" - 20')
Precautions for battery use:
" Replace all old batteries with new ones at the same time.
" Do not mix old and new batteries.
" Remove the batteries if the unit is not to be used for long periods
of time. This will prevent potential damage due to battery leakage.
Caution:
" Do not use rechargeable batteries (nickel-cadmium battery, etc.).
" Installing the batteries incorrectly may cause the unit to malfunction.
Notes concerning use:
" Replace the batteries if the operating distance is reduced or if the
operation becomes erratic. Purchase 2 "AA" size batteries (UM/
SUM-3, R6, HP-7 or similar).
" Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
" Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit.
" Keep the remote control away from moisture, heat, shock, and
vibrations.
E-11
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)2.fm
Sound control
CD-XP120W
! Pre-programmed equaliser/Extra bass
(X-BASS)
ENGLISH
When the power is first turned on, the unit will enter the flat (X-BASS
on) mode which emphasises the bass frequencies, and "X-BASS"
will appear.
The sound is not modified.
JAZZ (X-BASS off)
Treble is cut a little.
ROCK (X-BASS off)
Bass and treble are emphasised.
CLASSIC (X-BASS off) Treble is reduced a lot.
! Volume control
Press the VOLUME ( or ) button to increase or decrease the volume.
VOLMIN 1
POPS (X-BASS off)
Bass and treble are slightly emphasised.
VOCAL (X-BASS off)
Vocals (midrange tones) are emphasised.
FLAT (X-BASS on)
Bass frequencies are emphasised.
To enter or cancel the extra bass mode:
The X-BASS button on the remote control allows you to switch
between "FLAT (X-BASS on)" and "FLAT (X-BASS off)".
- Sound control -
FLAT (X-BASS off)
Basic Operation
Changing the mode:
Press the EQUALIZER/X-BASS/DEMO (EQUALIZER MODE) button repeatedly until the desired sound mode appears.
2 ..... 29 30 VOLMAX
E-12
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)2.fm
CD-XP120W
Setting the clock
ENGLISH
This may be operated only with the remote control.
In this example, the clock is set for the 24-hour (0:00) display.
- Setting the clock -
Basic Operation
4
1
2
3
Press the ON/STAND-BY button to turn the power on.
Press the CLOCK button and within 8 seconds, press the
MEMORY/SET button.
Within 30 seconds, press the PRESET ( or ) button to
select 24-hour or 12-hour display and then press the MEMORY/SET button.
5
Within 30 seconds, press the PRESET ( or ) button to
adjust the hour and then press the MEMORY/SET button.
" Press the PRESET ( or ) button once to advance the time
by 1 hour. Hold it down to advance continuously.
" When the 12-hour display is selected, "AM" will change automatically to "PM".
Within 30 seconds, press the PRESET ( or ) button to adjust the minutes and then press the MEMORY/SET button.
" Press the PRESET ( or ) button once to advance the time
by 1 minute. Hold it down to advance continuously.
" The hour will not advance even if minutes advance from "59"
to "00".
To confirm the time display:
Press the CLOCK button.
The time display will appear for about 8 seconds.
Note:
The time will flash at the push of the CLOCK button when the AC
power supply is restored after a power failure or unplugging the unit.
Readjust the clock as follows.
"0:00"
The 24-hour display will appear.
(0:00 - 23:59)
"AM 12:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
Note that this can only be set when the unit is first installed or it
has been reset. [Refer to "Clearing all the memory (reset)" on
page 27 for details.]
To readjust the clock:
Perform "Setting the clock" from the beginning. If the time display is
flashing, step 3 (for selecting the 24-hour or 12-hour display) will be
skipped.
To change the 24-hour or 12-hour display:
1 Clear all the programmed contents. [Refer to "Clearing all the
memory (reset)" on page 27 for details.]
2 Perform "Setting the clock" from the beginning.
E-13
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)2.fm
Listening to a CD (CDs)
CD-XP120W
ENGLISH
4
Place the CD(s) on the disc tray, label side up.
When loading a third disc, press the DISC SKIP button to
turn the disc tray, then place the CD in the open position.
" CDs can be placed on any open position on the disc tray.
" Be sure to place 8 cm (3") CD(s) in the middle of the disc positions.
5
Press the
OPEN/CLOSE button to close the disc tray.
Total number of tracks on
the CD whose number is
flashing
1
2
3
Press the ON/STAND-BY button to turn the power on.
Press the CD button.
Press the
OPEN/CLOSE button to open the disc tray.
8 cm (3")
Total playing time of the CD
whose number is flashing
6
To select the CD you want to listen to first, press one of
1 - 3 buttons on the remote control.
7
Press the
/
CD Playback
12 cm (5")
- Listening to a CD (CDs) -
This system can also play audio CD-R and CD-RW discs, but cannot record.
Some audio CD-R and CD-RW discs may not be playable due to the
state of disc or the device that was used for recording.
button to start playback.
" Playback will begin from track 1 on the disc you have selected to play. After that disc finishes playing, the next disc will
automatically start playback.
" When the last track on the third disc has finished playing, the
CD player will stop automatically.
" When there is no CD in one of the disc 1 - 3 positions, that
position will be skipped and the next CD will be played.
E-14
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)2.fm
CD-XP120W
Listening to a CD (CDs) (continued)
ENGLISH
To interrupt playback:
Press the CD button on the remote control.
To resume playback from the same point, press the
! To locate the beginning of a track
button.
To stop playback:
Press the button.
CD Playback
- Listening to a CD (CDs) -
To remove the CDs:
Whilst in the stop mode, press the OPEN/CLOSE button.
The disc tray will open. Remove the two discs. Then, press the
DISC SKIP button to rotate the disc tray and remove the remaining
disc.
Caution:
" If you tilt the unit forward in the power stand-by mode, the disc
tray will open. The unit or CD may be damaged.
" Do not place two CDs in one disc tray.
" Do not play discs with special shapes (heart- or octagonshaped). It may cause malfunctions.
" Do not push the disc tray whilst it is moving.
" Do not turn the disc tray by hand. This may cause malfunctions.
" If the power fails whilst the tray is open, wait until the power is
restored.
" If the disc tray is stopped forcibly, "OPEN" will appear in the display. If this occurs, press the OPEN/CLOSE button.
" If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
" If a disc is damaged, dirty, or loaded upside down, the disc will
skip.
To move to the beginning of the next track:
Press the
/
button for less than 0.5 seconds during playback.
To restart the track being played:
Press the
/
button for less than 0.5 seconds during playback.
Notes:
" You can locate the beginning of a track on a single disc only.
/
or
/
but" You can skip to any track by pressing the
ton repeatedly until the desired track number appears.
! To locate the desired portion
For audible fast forward:
Press and hold down the
For audible fast reverse:
Press and hold down the
/
button during playback.
/
button during playback.
Notes:
/
or
/
button
" Normal playback will resume when the
is released.
" You can locate the desired portion on a single disc only.
" When the end of the last track is reached during fast forward, the
unit will enter the stop mode. When the beginning of the first track
is reached during fast reverse, playback will start when you
release the
/
button.
E-15
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)2.fm
CD-XP120W
! Repeat play
You can play a disc starting with the desired track.
All tracks on up to 3 discs, or a programmed sequence can be continuously repeated.
To repeat all tracks on up to 3 discs:
Press the / button twice.
2
3
Whilst in the stop mode, press one of the 1 - 3 buttons
on the remote control or DISC SKIP button to select the desired disc.
Press the
/
or
/
button to select the desired
track.
Selected disc number
Selected track number
Press the / button to start playback.
Playback of the selected track is started. When the end of last
track of the disc selected is reached, the next disc will be automatically started.
Notes:
" When the DISC SKIP button is pressed during playback, the next
disc will begin automatically.
" When one of the
1 3 buttons on the remote control is
pressed during playback, the selected disc will begin automatically.
" If you select a disc with the 1 - 3 buttons and a track with the
/
or
/
button, a track number exceeding the total
track number on the disc may be displayed (maximum 99). In this
case, the last track on the selected disc is played back.
To repeat a desired track:
Perform steps 1 - 4 in the "Programmed play" section on page 17
and then press the / button twice.
To cancel repeat play:
Press the / button again.
" " will go out.
! Random play
The tracks on the disc(s) can be played in random order automatically.
Press the RANDOM button on the remote control to begin random play.
To cancel random play:
Press the RANDOM button.
Notes:
button during random play, you can move
" If you press the
to the track selected next by the random operation. On the other
hand, the
button does not allow you to move to the previous track. The beginning of the track being played will be located.
" In random play, the CD player will select and play tracks automatically. (You cannot select the order of the tracks.)
Caution:
After performing repeat or random play, be sure to press the button. Otherwise, the disc(s) will play continuously.
CD Playback
1
- Listening to a CD (CDs) -
ENGLISH
! Starting playback with a desired track
E-16
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)2.fm
CD-XP120W
Listening to a CD (CDs) (continued)
ENGLISH
! Programmed play
CD Playback
- Listening to a CD (CDs) -
This may be operated only with the remote control.
You can choose up to 20 selections for playback in the order you
like.
1
Whilst in the stop mode, press
one of the 1 - 3 buttons to
select the desired disc.
2
Press the
/
or
/
button to select the desired
track.
3
4
5
Selected disc number
Selected track number
If you select and memorise a track whose number exceeds the
last track number on the disc, it will not be played back.
Press the MEMORY/SET button to save the track number.
Playback order
When the track is memorised, "MEMORY" will appear.
Repeat steps 1 - 3 for other tracks. Up to 20 tracks can be
programmed.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR button.
Press the / button to start playback.
To clear the programmed selections:
Whilst the "MEMORY" indicator is lit, set the
CD to the stop mode and then press the
CLEAR button.
Each time the button is pressed, one track will
be cleared, beginning with the last track programmed. When all the tracks are cleared,
"MEMORY" will disappear.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator will be displayed. Then follow steps 1 - 3 to add tracks. The new
tracks will be stored after the last track of the original programme.
Notes:
" If you open the disc tray, change to another function or enter the
stand-by mode, the programmed sequence is automatically cancelled.
" During programme operation, random play is not possible.
! Care of compact discs
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD collection and player.
" Do not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
" Keep your discs away from direct sunlight, heat, and excessive
moisture.
" Always hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the centre, along the radius.
NO
YES
Correct
E-17
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)2.fm
Listening to the radio
CD-XP120W
ENGLISH
3
Press the TUNING (
sired station.
or
) button to tune in to the de-
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
" " " will appear when an FM broadcast is in stereo.
FM stereo mode indicator
FM stereo receiving indicator
! Tuning
1
2
Radio
Notes:
" When radio interference occurs, auto scan tuning may stop
automatically at that point.
" Auto scan tuning will skip weak signal stations.
" To stop the auto tuning, press the TUNING button again.
- Listening to the radio -
Manual tuning:
Press the TUNING button as many times as required to tune in
to the desired station.
Auto tuning:
When the TUNING button is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
Press the ON/STAND-BY button to turn the power on.
" If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monaural, and the sound becomes clearer.
Press the TUNER (BAND) button repeatedly to select
the desired frequency band (FM or AM).
Note:
This product can receive FM stereo/FM monaural and AM monaural
broadcasts. AM stereo broadcasts will not be played in stereo.
E-18
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)2.fm
CD-XP120W
Listening to the radio (continued)
Listening to a cassette tape
! Memorising a station
Before playback:
" For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not recommended.)
" Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
" Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
ENGLISH
Radio / Tape Playback
- Listening to the radio / Listening to a cassette tape -
This may be operated only with the remote control.
You can store 30 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
1
2
Perform steps 1 - 3 in "Tuning" on page 18.
Press the MEMORY/SET button to enter the preset tuning
saving mode.
3
Within 5 seconds, press the PRESET ( or ) button to select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
Within 5 seconds, press the
MEMORY/SET button to
store that station in memory.
4
5
If the preset number indicators go out before the station is
memorised, repeat the operation from step 2.
Repeat steps 1 - 4 to set other stations, or to change a preset station.
When a new station is stored in memory, the station previously
memorised will be erased.
Note:
The backup function protects the memorised stations for a few
hours should there be a power failure or the AC power lead disconnection.
! To recall a memorised station
Press the PRESET (
tion.
or
) button to select the desired sta-
E-19
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)2.fm
CD-XP120W
ENGLISH
! TAPE 1 or TAPE 2 playback
! Continuous playback (TAPE 2 to TAPE 1)
1
2
3
Press the ON/STAND-BY button to turn the power on.
1
2
3
Press the ON/STAND-BY button to turn the power on.
Press the TAPE button.
5
Press the
back.
4
5
6
7
Press the TAPE button.
4
Load a cassette into the TAPE 1
or TAPE 2 cassette compartment with the side to be played
facing toward you.
TAPE 1
TAPE 2
button of TAPE 1 or TAPE 2 to start play-
To stop playback:
Press the
button.
Fast forward/rewind:
To advance the tape, press the
button, then press the
button. To rewind, press the
button, then press the
button.
Press the
button to open the cassette door.
Load cassettes into the TAPE 1 and TAPE 2 cassette
compartments with the side to be played facing toward
you.
Press the
button of TAPE 2.
Press the button of TAPE 1.
Press the
button of TAPE 1.
When TAPE 2 stops at the end of the tape, the button of
TAPE 2 and the button of TAPE 1 will be automatically released, and TAPE 1 will start playing.
Note:
When in the continuous play mode, pressing the
TAPE 2 will start TAPE 1 automatically.
To interrupt playback (TAPE 1 only):
Press the button during playback.
Press the button again to resume playback.
" Do not press the button whilst the fast forward or rewind operations are in progress. The
or
button will not be released
when the tape end is reached. Once this occurs, press the
button.
button of
Tape Playback
button to open the cassette door.
- Listening to a cassette tape -
Press the
Caution:
" Before changing from one tape operation to another, press the
button.
" If TAPE 1 and TAPE 2 are played simultaneously, only the sound
from TAPE 2 will be audible.
E-20
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)2.fm
CD-XP120W
Playing karaoke
ENGLISH
Notes:
! When you sing too loud through the microphone, your voice may
be distorted depending on the devices connected. If this happens, lower the microphone volume.
! If an extremely sensitive microphone is used, howling may be
generated.
! Unidirectional microphone is more appropriate for vocal use.
Karaoke
- Playing karaoke -
If squealing occurs:
! Reduce the microphone volume.
! Change the direction of the microphone.
! Reduce the volume of the main unit.
! Move the microphone away from the speakers.
1
Turn the MIC LEVEL control fully anti-clockwise to protect the speakers from shock noise and to avoid disturbing noises.
Caution:
! When not using the microphone, remove it from the MIC socket.
! When connecting or disconnecting the microphone, turn the MIC
LEVEL control fully anti-clockwise.
2
Connect the microphone to the MIC socket.
" Recording of mixed sound to a cassette
tape
! Use a microphone with a 6.3 mm (1/4") plug, an impedance
of 600 ohms.
! Use a standard plug adaptor when using a microphone with
a 3.5 mm (1/8") diameter plug.
3
4
Press the ON/STAND-BY button to turn the power on.
5
Adjust the volume of the audio source using the VOLUME buttons.
6
Rotate the MIC LEVEL control clockwise to increase the
microphone volume and anti-clockwise to decrease it.
Press the CD, TUNER or TAPE button to select the audio source and play it.
You can record mixed sound from the microphone and CD, TUNER
or TAPE 2.
1 Perform steps 1 - 3 above.
2 Load a cassette into the TAPE 1 cassette compartment.
3 Perform steps 4 - 6 above.
4 Press the button of TAPE 1.
5 Press the button of TAPE 1, which also engages the button.
6 Press the button of TAPE 1 again to begin recording.
Note:
To record the microphone signals only, load a cassette into the
TAPE 1 cassette compartment and press the TAPE button. Then,
press the button of TAPE 1.
E-21
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)3.fm
Recording to a cassette tape
CD-XP120W
ENGLISH
Recording can be operated in the TAPE 1 compartment. The TAPE
2 is for playback only.
" Recording from a CD (CDs)
You can record 3 CDs continuously.
Press the ON/STAND-BY button to turn the power on.
Load a cassette into the TAPE 1 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3
4
Press the CD button and load the desired disc.
5
Press the button of TAPE
1, which also engages the
button.
Press one of the 1 - 3 buttons on the remote control
to select the disc to be recorded first.
CD playback and tape recording will start.
To stop recording:
Press the
button of TAPE 1.
To perform programmed recording:
1 Press the CD button.
2 Programme discs and tracks. (See page 17.)
3 Press the button of TAPE 1, which also engages the
Tape Recording
1
2
- Recording to a cassette tape -
Before recording:
! When recording important selections, make a preliminary test to
ensure that the desired material is properly recorded.
! SHARP is not liable for damage or loss of your recording arising
from malfunction of this unit.
! The volume and sound controls can be adjusted with no effect on
the recorded signal (Variable Sound Monitor).
! For recording, use only normal tapes. Do not use metal or
CrO tapes.
button.
E-22
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)3.fm
CD-XP120W
Recording to a cassette tape (continued)
ENGLISH
" Recording from the radio
1
2
" Dubbing from tape to tape
You can record from TAPE 2 to TAPE 1.
Tune in to the desired station. (See page 18.)
Load a cassette into the TAPE 1 cassette compartment
with the side to be recorded on facing you.
1
2
Tape Recording
- Recording to a cassette tape -
Wind past the leader of the tape, on which recording cannot be
performed.
3
4
5
Press the
Press the
button of TAPE 1 again to begin recording.
To stop recording:
Press the
button of TAPE 1.
Note:
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
Erase-prevention tab of cassette tapes:
! When recording on a cassette tape,
make sure that the erase-prevention
tabs are not removed. Cassettes have
removable tabs that prevent accidental
recording or erasing.
! To protect the recorded sound, remove
the tab after recording. Cover the tab
hole with adhesive tape to record on the
tape without the tab.
Side A
Load a prerecorded cassette into the TAPE 2 cassette
compartment. Insert a blank tape into the TAPE 1 cassette compartment.
It is recommended that the recording tape is the same length as
the master tape.
button of TAPE 1.
Press the button of TAPE 1,
which also engages the button.
Press the ON/STAND-BY button to turn the power on.
3
4
5
Press the TAPE button.
Press the
button.
button of TAPE 1, which also engages the
6
Press the
button of TAPE 2.
Press the button of TAPE 1.
The button of TAPE 1 will be released automatically and dubbing from TAPE 2 to TAPE 1 will begin.
To stop dubbing:
Press the
button of TAPE 1.
" Erasing recorded tapes
Tab for
side B
Tab for
side A
1
2
3
Load the tape to be erased into the TAPE 1 cassette compartment with the side to be erased facing toward you.
Press the TAPE button.
Press the button of TAPE 1, which also engages the button
to begin erasing.
Notes:
! Do not connect anything to the MIC socket.
! Make sure that the TAPE 2 is not in use.
E-23
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)3.fm
Timer and sleep operation
This may be operated only with the remote control.
Timer playback:
The unit turns on and plays the desired source (CD, tuner) at the
preset time.
CD-XP120W
ENGLISH
" Timer playback
Before setting timer:
1
2
Press the CLOCK button to check that the clock is on time.
Load the discs to be played.
1
2
Press the ON/STAND-BY button to turn the power on.
When you selected the TUNER (BAND), tune in to the desired
station.
3
Adjust the volume using the VOLUME buttons.
Do not turn the volume up too high. Timer playback starts at the
volume you set here.
4
Press the TIMER button and within 8 seconds, press
the MEMORY/SET button.
5
Within 30 seconds, press the PRESET ( or ) button
to specify the hour to start, then press the MEMORY/
SET button.
Advanced Features
Press the CD or TUNER (BAND) button to select the desired function.
- Timer and sleep operation -
Sleep operation:
The radio, compact disc and cassette tape can all be turned off
automatically.
Continued to the next page
E-24
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)3.fm
CD-XP120W
Timer and sleep operation (continued)
ENGLISH
6
Advanced Features
- Timer and sleep operation -
7
Within 30 seconds, press the PRESET ( or ) button
to specify the minute to start, then press the MEMORY/
SET button.
" Sleep operation
1
2
The unit will enter the timer stand-by mode automatically.
When the preset time is reached, playback will start.
It will enter the power stand-by mode one hour after the
timer playback starts.
To reset or change the timer setting:
Perform "Timer playback" from the beginning.
Note:
Once the time is set, the setting will be retained until a new time is
entered.
Caution:
Do not turn the volume up too high. Playback starts at the volume
set before entering the timer stand-by mode.
Press the SLEEP button.
To change the sleep time:
Press the SLEEP button repeatedly to select the desired sleep
time. The time will decrease as follows.
The amount of sleep time can also be changed whilst in the
sleep mode.
3:00
To cancel the timer playback:
Press the ON/STAND-BY button to turn the power on.
8
9
Play back the desired sound source.
(cancel)
3
2:00
0:05
1:30
0:10
1:00
0:15
To cancel the sleep operation:
Press the ON/STAND-BY button whilst the sleep timer is set.
To confirm the remaining sleep time:
Press the SLEEP button whilst the sleep timer is set.
The remaining sleep time is displayed for about 3 seconds.
Note:
When you use the sleep operation with a cassette, set the sleep
time longer than the remaining playback time of the cassette. If the
unit enters the stand-by mode before the cassette reaches its end,
the cassette mechanism or the tape may be damaged.
E-25
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
0:30
Your system will enter the power stand-by mode automatically after the preset time has elapsed.
CD-XP120W(A)3.fm
Troubleshooting chart
Symptom
" The clock is not on time.
" If the unit still malfunctions, reset
it. (Refer to page 27.)
" Is the volume level set to "MIN"?
" Are the headphones connected?
" Are the speaker wires disconnected?
! CD player
Symptom
" Playback does not start.
Possible cause
" Is the unit placed near the TV or
computer?
" Is the FM aerial or AM loop aerial
placed properly? Move the aerial
away from the AC power lead or
the unit if located near.
Possible cause
" Did a power failure occur? Reset
the clock. (Refer to page 13.)
" When a button is pressed, " Set this unit to the power standthe unit does not respond.
by mode and then turn it back on.
" No sound is heard.
Symptom
" Radio makes unusual
noise consecutively.
Possible cause
" Is the disc loaded upside down?
" Playback stops in the mid- " Does the disc satisfy the standle or is not performed
dards?
properly.
" Is the disc distorted or
scratched?
! Cassette deck
Symptom
" Cannot record.
"
"
"
"
"
Possible cause
" Is the erase-prevention tab removed?
Cannot record tracks with " Is it a normal tape? (You cannot
proper sound quality.
record on a metal or CrO tape.)
Cannot erase completely.
Sound skipping.
" Is there any slack?
" Is the tape stretched?
Cannot hear treble.
" Are the capstans, pinch rollers,
or heads dirty?
Sound fluctuation.
! Remote control
Symptom
" The remote control does
not operate.
" Playback sounds are
" Is the unit located near excessive
skipped, or stopped in the
vibrations?
middle of a track.
" Is the disc very dirty?
" Has condensation formed inside
the unit?
References
! General
ENGLISH
! Tuner
- Troubleshooting chart -
Many potential problems can be resolved by the owner without calling a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
CD-XP120W
Possible cause
" Is the AC power lead of the unit
plugged in?
" Is the battery polarity respected?
" Are the batteries dead?
" Is the distance or angle incorrect?
" Does the remote control sensor
receive strong light?
E-26
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)3.fm
CD-XP120W
Troubleshooting chart (continued)
ENGLISH
! If trouble occurs
! Condensation
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, tape heads, etc.) or on the transmitter on the remote control.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc (or cassette) in the unit until normal
playback is possible (about 1 hour). Wipe off any condensation on
the transmitter with a soft cloth before operating the unit.
References
- Troubleshooting chart -
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on again.
2 If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
! Clearing all the memory (reset)
1
2
Press the ON/STAND-BY button to enter the power stand-by
mode.
Whilst pressing down the TUNER (BAND) button and the DISC
SKIP button, press the ON/STAND-BY button until "CLEAR"
appears.
Caution:
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD programme.
! Before transporting the unit
This unit is equipped with a transport safety screw on the back to
prevent damage during transportation.
1 Press the ON/STAND-BY button
to turn the power on.
2 Remove all discs from the unit
and close the disc tray.
3 Press the ON/STAND-BY button
to enter the stand-by mode.
" "SHARP" is displayed.
4 When "SHARP" disappears, unplug the AC power lead from the
wall socket.
5 Insert the transport screw into the
back of the unit and tighten it with
a flat-blade screwdriver or a coin.
Caution:
If you tilt the unit forward during transportation without the transport
screw, the disc tray may be slid open. It may damage the unit or CD.
E-27
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)3.fm
Maintenance
CD-XP120W
! Cleaning the tape-handling parts
! Cleaning the cabinet
" Dirty heads, capstans or pinch rollers can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
" When cleaning the heads, pinch rollers, etc., unplug the unit
which contains high voltages.
Periodically wipe the cabinet with a soft cloth
and a diluted soap solution, then with a dry
cloth.
Erase head
Recording/Playback head
Capstan
C
D
E
C
D
Caution:
" Do not use chemicals for cleaning (petrol,
paint thinner, etc.). It may damage the cabinet finish.
" Do not apply oil to the inside of the unit. It
may cause malfunctions.
References
TAPE 2
B
Pinch roller
Playback head
" After long use, the deck's heads and capstans may become magnetised, causing poor sound. Demagnetise these parts once
every 30 hours of playing/recording time by using a commercial
tape head demagnetiser. Read the demagnetiser's instructions
carefully before use.
Headphones
- Maintenance / Headphones -
TAPE 1
A
ENGLISH
" Before plugging in or unplugging the headphones, reduce the volume.
" Be sure your headphones have a 3.5 mm (1/8") diameter plug and
are between 16 ohms and 50 ohms impedance. The recommended impedance is 32 ohms.
" Plugging in the headphones disconnects the speakers automatically. Adjust the volume using the VOLUME buttons.
E-28
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)3.fm
CD-XP120W
Specifications
ENGLISH
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
! General
References
- Specifications -
Power source
Power
consumption
Dimensions
Weight
AC 110/127/220/230 - 240 V, 50/60 Hz
48 W
Output terminals
Input terminals
Type
Signal readout
D/A converter
Frequency
response
Dynamic range
3-disc multi-play compact disc player
Non-contact, 3-beam semiconductor laser
pickup
1-bit D/A converter
20 - 20,000 Hz
90 dB (1 kHz)
! Tuner
Width: 270 mm (10-5/8")
Height: 305 mm (12")
Depth: 343 mm (13-1/2")
6.5 kg (14.3 lbs.)
! Amplifier
Output power
! CD player
MPO: 60 W (30 W + 30 W) (10 % T.H.D.)
RMS: 40 W (20 W + 20 W) (10 % T.H.D.)
RMS: 30 W (15 W + 15 W) (0.9 % T.H.D.)
Speakers: 8 ohms
Headphones: 16 - 50 ohms (recommended:
32 ohms)
Microphone: 1 mV/600 ohms
Frequency range
FM: 88 - 108 MHz
AM: 531 - 1,602 kHz
! Cassette deck
Frequency
response
Signal/noise ratio
Wow and flutter
125 - 8,000 Hz (Normal tape)
50 dB (TAPE 1, recording/playback)
50 dB (TAPE 2, playback)
0.3 % (WRMS)
! Speaker
Type
Maximum input
power
Rated input power
Impedance
Dimensions
Weight
2-way type speaker system
Tweeter
10 cm (4") Woofer
40 W
20 W
8 ohms
Width: 200 mm (7-7/8")
Height: 305 mm (12")
Depth: 167 mm (6-9/16")
2.1 kg (4.6 lbs.)/each
E-29
02/5/27
Downloaded From Disc-Player.com Sharp Manuals
CD-XP120W(A)3.fm
MEMO
CDXP120WA_MEMO
Downloaded From Disc-Player.com Sharp Manuals
1
02.5.27, 11:35 AM
SHARP CORPORATION
9906
TINSE0106SJZZ
02F N TO 1
CDXP120WA_BACK
Downloaded From Disc-Player.com Sharp Manuals
1
02.6.3, 10:35 AM