Motorola
iDEN
Digital Multi-service Data-capable Phone
i605 Phone User’s Guide
@NNTN6007A@
NNTN6007A
IMPORTANT NOTICE: PLEASE READ
PRIOR TO USING YOUR PHONE
The SIM card provided in this kit is intended for use with
the phone provided in this package.
Loss of certain features will result when using a SIM
card from one of the following models: i30sx, i35s,
i50sx, i55sr, i58sr, i60c, i80s, i85s, i88s, i90c, i95cl
series, and the i2000 series.
For more information on SIM card compatibility, go to
www.motorola.com/iden/support.
Defects or damage to your Motorola phone that result
from the use of non-Motorola branded or certified
Accessories, including but not limited to replacement
housings and or other peripheral accessories, are
excluded from warranty coverage. Please refer to the
text of Motorola's Limited One Year warranty located in
this user’s guide for complete details.
Contents
Getting Started........................................... 1
Locating Your SIM Card ....................................2
Battery ...............................................................3
Activating Service..............................................6
Powering On and Off.........................................6
Enabling Over-the-Air Security..........................7
Phone Programming .........................................7
Finding Your Phone Number and Private ID .....7
Phone Basics ....................................................8
SIM Card Security ...........................................12
Antenna ...........................................................15
Accessories .....................................................16
For More Information.......................................16
Making Calls............................................. 17
Phone Calls .....................................................17
Private Calls ....................................................17
Receiving Calls................................................17
Choosing a Number to Call .............................18
Missed Phone Calls.........................................19
Using Speakerphone.......................................19
Using Mute ......................................................20
Making Emergency Phone Calls .....................20
Call Alerts..................................................21
Sending Call Alerts..........................................21
Receiving Call Alerts .......................................21
Using the Call Alert Queue..............................21
Recent Calls ..............................................23
Calls and Call Alerts ........................................23
My Info From Other Phones ............................23
Contact Information From Other Phones ........24
Viewing the Recent Calls List..........................24
Storing Items to Contacts ................................25
Deleting Items .................................................25
Making Calls From the Recent Calls List ........25
Contacts ....................................................27
Accessing Contacts.........................................28
Creating Entries ..............................................28
Storing Numbers From the Idle Screen...........30
Editing Entries .................................................30
i
Viewing Entries................................................30
Deleting Entries ...............................................33
Checking Capacity ..........................................33
Creating Pauses and Waits.............................33
International Numbers .....................................34
Making Calls From Contacts ...........................34
Accessing Contacts with GSM Phones ...........35
Call Forwarding........................................ 36
Forwarding All Calls ........................................36
Turning Off Call Forwarding ............................36
Forwarding Missed Calls .................................37
Viewing Call Forwarding Settings....................37
Advanced Calling Features..................... 38
Call Waiting .....................................................38
Switching Between Calls .................................38
Putting a Call on Hold......................................39
Calling 2 People ..............................................39
Creating Pauses and Waits While Dialing.......40
Making International Calls ...............................40
One Touch PTT...............................................40
Call Timers ......................................................41
ii
Using Your Phone as a Modem ......................42
Making TTY Calls ............................................43
Group Calls and Selective Dynamic
Group Calls ...........................................46
Group Calls .....................................................46
Selective Dynamic Group (SDG) Calls ...........47
Memo .........................................................53
Ring Tones ................................................54
Setting Your Phone to Vibrate.........................54
Ring and Vibrate .............................................55
Assigning Ring Tones to Contacts ..................55
Viewing Ring Tone Assignments ....................55
Downloading More Ring Tones .......................56
About DRM Ring Tones ..................................56
Managing Memory ..........................................56
Deleting Custom Ring Tones ..........................56
Entering Text ............................................58
Using Word Mode ...........................................58
Special Function Keys.....................................59
Messages ................................................. 60
Message Notifications .....................................60
Message Center ..............................................61
Voice Mail Messages ............................... 62
Receiving a Message ......................................62
Accessing Voice Mail From
the Message Center ...................................62
Sending Unanswered Calls to Voice Mail .......62
MOSMS Messages ................................... 63
Setting Up........................................................63
Receiving a Message ......................................63
Reading from the Message Center .................64
Creating and Sending Messages ....................64
Sorting Messages............................................67
Managing Memory...........................................67
Media Center ............................................ 68
Viewing the Media Center ...............................68
Forward Locked Items.....................................69
DRM Items ......................................................70
Pictures ...........................................................70
Audio Recordings ............................................71
Renaming Items ..............................................72
Locking Items ..................................................72
Deleting Items .................................................72
Managing Memory ..........................................73
Digital Rights Management .....................74
Installing Items ................................................74
Understanding DRM Status Icons ...................74
Sharing Items ..................................................74
Managing DRM Items .....................................75
Using Send via PTT ..................................78
Sending a Picture ............................................78
Receiving a Picture .........................................79
Sending My Info and Contact Information .......80
My Info .......................................................82
Viewing My Info ...............................................82
Editing My Info ................................................82
Setting Sending Options .................................83
Voice Records ..........................................84
Viewing Voice Records ...................................84
Creating Voice Records ..................................84
iii
Playing Voice Records ....................................85
Labeling Voice Records ..................................85
Locking Voice Records....................................85
Deleting Voice Records...................................86
Managing Memory...........................................86
Making a Bluetooth® Connection ....................95
Setting Device Details .....................................97
Sending Contacts, Datebook Events and
Pictures.......................................................98
Receiving Items...............................................99
Java Applications .................................... 87
GPS Enabled...........................................101
Installing Applications......................................87
Running Applications.......................................87
Suspending Applications .................................87
Resuming Applications....................................88
Ending Applications.........................................88
Downloading Applications ...............................88
Deleting Applications.......................................88
Managing Memory...........................................89
Shortcuts on the Main Menu ...........................89
Java Applications and GPS Enabled...............90
Bluetooth® ............................................... 93
Understanding Bluetooth® Access
Settings.......................................................93
Setting Your Phone for Bluetooth® ..................93
Accessing Bluetooth® .....................................94
iv
IMPORTANT: Things to Keep in Mind ..........101
Making an Emergency Call ...........................102
Viewing Your Approximate Location .............103
Enhancing GPS Performance .......................104
Updating Satellite Almanac Data ..................106
Setting Privacy Options .................................107
Using GPS with Map Software ......................108
Datebook .................................................111
Viewing Datebook .........................................111
Creating Events.............................................112
Editing Events ...............................................114
Deleting Events .............................................114
Receiving Reminders ....................................115
Making Calls From Datebook and Datebook
Reminders ................................................115
Customizing Datebook Setup........................116
Customizing Your Phone ...................... 117
Using a Headset .....................................132
Setting the Volume ........................................117
Setting Your Phone to Vibrate.......................117
Changing the Look of Your Phone ................117
Airplane Mode—Temporarily Turning
Off Calls ....................................................120
Using Settings ...............................................120
Using a Bluetooth Headset ...........................132
Attaching a Headset......................................132
Using a Remote PTT Button .........................132
Profiles ................................................... 125
Viewing Profiles.............................................125
Switching Profiles ..........................................125
How Changing Settings Affects Profiles........125
Temporary Profiles ........................................126
Creating Profiles............................................127
Editing Profiles ..............................................127
Deleting Profiles ............................................127
Setting Call Filtering ......................................128
Understanding Status Messages ..........133
Safety and General Information ............136
RF Operational Characteristics .....................136
Portable Radio Product Operation and EME
Exposure...................................................136
Electromagnetic Interference/Compatibility...139
Medical Devices ............................................139
Operational Warnings ...................................140
Operational Cautions ....................................141
Accessory Safety Information .......................142
Shortcuts ................................................ 130
Creating a Shortcut .......................................130
Using a Shortcut............................................130
Editing a Shortcut ..........................................131
Deleting Shortcuts .........................................131
v
MOTOROLA LIMITED WARRANTY ...... 144
Limited Warranty
Motorola Communication Products
(International) ..................................... 148
Patent and Trademark Information ...... 152
Index ....................................................... 153
Driving Safety Tips ................................ 161
vi
DECLARATION OF CONFORMITY
Per FCC CFR 47 Part 2 Section 2.1077(a)
Responsible Party Name: Motorola, Inc.
Address: 8000 West Sunrise Boulevard
Plantation, FL 33322 USA
Phone Number: 1 (800) 453-0920
Hereby declares that the product:
Product Name: i605
Model Number: H58XAN6RR4AN
Conforms to the following regulations:
FCC Part 15, subpart B, section 15.107(a),
15.107(d) and section 15.109(a)
Class B Digital Device
As a personal computer peripheral, this device
complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
Note: This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against
harmful interference in a residential
installation. This equipment generates,
uses and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation.
If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is
encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving
antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced
radio/TV technician for help.
vii
Getting Started
retractable
antenna
status light
p
volume
controls
accessory
connector
Navigation key — press the arrows to
scroll through menus and lists.
audio jack
Push-To-Talk
(PTT) button
Power button.
O
OK key — selects highlighted item;
answers calls.
m
Menu key — accesses context-sensitive
menus.
A
Option key — selects the option
appearing above it on the display.
s
Send key — places phone calls.
e
End key — ends phone calls; returns to
idle screen.
microphone
1
Getting Started
Locating Your SIM Card
t
t
.
.
Your SIM (Subscriber Identity Module) card is a
small piece of plastic located in the SIM card
holder in the back of your phone, underneath the
battery.
Turns Private/group/SDG call speaker on
and off; used with voice names and voice
records.
Ends calls; sends incoming phone calls to
voice mail.
SIM card
holder
SIM card
Status Indicates the status of your connection.
light
Solid green means your phone is in use;
flashing green means your phone is ready
to use; solid red means no service;
flashing red means your phone is signing
on to the network.
To start using your i605 phone:
•
•
•
•
Make sure your SIM card is in place.
Charge the battery.
Activate your service.
Enable over-the-air security if you are prompted
to.
2
If your SIM card is not in the SIM card holder, it
may be in the box your phone came in, attached to
a piece of plastic about the size of a credit card. If
this is the case, carefully detach your SIM card
from the surrounding plastic and insert it as
described in “Inserting Your SIM Card” on page 14.
If there is no SIM card in your phone or the box,
contact your service provider.
Battery
Battery
Inserting the Battery
Removing the Battery Door
1 Remove the battery door.
2 Insert the top of the battery into the battery area.
Press the bottom of the battery to secure it.
1 Make sure the phone is powered off.
2 Slide the release button back.
3 Gripping the battery door near the release
button, lift the battery door and remove it from
the back of your phone.
Grip
here.
3 Replace the battery door and press it gently until
you hear a click.
release
button
Charging the Battery
Your phone comes with a battery charger.
1 Plug the charger into an electrical outlet.
3
Getting Started
2 Open the connector cover.
Tip: To remove the charger from the accessory
connector: Press the buttons on the sides
of the plug. Pull the plug straight out.
4 When charging the battery for the first time,
charge for 30 minutes longer than the time
shown in “Charging Times”.
Charging Times
connector
cover
3 Plug the other end of the charger into the
accessory connector.
Check your battery and charger type against the
grid below to determine appropriate charging
times.
Battery
Charger
Rapid
Standard
High
2 hours
Performance
5.5 hours
Maximum
Capacity
9 hours
3.5 hours
For best results, charge the batteries within the
temperature range of 50°F to 104°F (10°C to
40°C).
Charger Attached or Device Attached appears
on the display.
4
Prolonged charging is not recommended.
Battery
Removing the Battery
1 With your phone powered off, remove the
battery door.
2 Remove the battery by pushing it toward the
antenna and lifting it out.
• The battery capacity is degraded if the battery is
stored for long periods while fully charged. If
long term storage is required, store at half
capacity.
Sleep Mode
Your phone uses Sleep mode to conserve battery
power. With Sleep mode, after your phone has
been idle for a specified interval, the display on
your phone will turn off.
You can set your phone to enter Sleep mode after
1 minute, 3 minutes, 5 minutes, or 15 minutes of
inactivity. See “Display/Info Features” on page 120.
Battery Use and Maintenance
• The Motorola iDEN Approved Lithium Ion
chargers provide optimum performance. Other
chargers may not fully charge the iDEN Lithium
Ion battery or may yield a reduced number of
lifetime charge cycles.
• Extreme temperatures degrade battery
performance. Do not store the battery where
temperatures exceed 140°F (60°C) or fall below
4°F (-20°C).
• Lithium Ion batteries have a self discharge rate
and without use, lose about 1% of their charge
per day.
Sleep mode turns off when you either press a key
or receive a call alert or phone call.
Holster
When you place your i605 phone in the holster that
you received with your phone, your phone will go
into Sleep mode to preserve the phone’s battery
life. The holster contains a magnet that activates
Sleep mode on your phone.
Note: Maintain a minimum distance of 1/4 inch
between the magnet and any media that
contains digital information, such as credit
cards, debit cards, etc., as this digital
information could be erased by the
magnet.
5
Getting Started
Activating Service
The first time you power your phone on, you must
be in your local calling area. This activates your
service.
A screen then appears prompting you to select Ok
to update your browser information. This screen
will only appear during initial activation. See
“Enabling Over-the-Air Security” on page 7.
Powering On and Off
The first time you power your phone on, a screen
may appear asking you to update your browser
information. This means you must enable security.
To power your phone on, press p.
Note: When powering on, if you press p for
more than 5 seconds, you will turn on
Airplane mode. See “Airplane Mode—
Temporarily Turning Off Calls” on page
120.
To power your phone off, press and hold p.
6
When You Power On For the First
Time
If the Enter SIM PIN Code screen appears, enter
your SIM PIN. See “Entering the PIN” on page 12.
Press A under Ok. If prompted, press A under
Ok again.
When you receive your phone, the SIM PIN is
0000. Change your PIN to prevent fraudulent use
of the SIM card (see “Changing the PIN” on page
12).
As your phone connects to the network, you will
see a welcome message and a connecting
message. When the idle screen appears, the
phone is ready to use.
Enabling Over-the-Air Security
Enabling Over-the-Air
Security
If you are set up to receive over-the-air
programming from your service provider, you must
enable security the first time you power on your
phone or within 10 days of first activation of your
phone:
1 When you power on your phone for the first time,
after the idle screen appears, you will be
prompted to select Ok to update your browser
information.
Note: If you press A under Later, you will be
prompted to enable security each time
you power on your phone until you press
A under Ok.
To accept programming:
1 When you receive an alert notification saying
New Browser Message - Receive
Programming Info, press O or press A under
Goto.
2 You are prompted to accept changes to your
lists. Press O or press A under Ok.
3 If you are prompted again to accept changes to
your lists, press O or press A under Ok.
4 A confirmation screen displays. Press O or
press A under Ok.
5 Press e to return to the idle screen.
Finding Your Phone Number
and Private ID
2 Press A under Ok.
3 You are prompted to enable security. Press A
under Yes. A series of screens appears. If you
subscribe to your service provider’s plan, your
home page appears.
4 Press e to return to the idle screen.
My Info lets you view your phone number, Private
ID, and other phone information:
Phone Programming
Line 1 and Line 2 are your phone numbers.
Private is your Private ID, the number that others
use to contact you using Private service. These
numbers appear when you receive your alert
notification after enabling security on your phone.
Within 24 hours of enabling security, you may
receive an alert notification containing your Private
ID and Talkgroup lists for Private calls.
1
2
3
4
Press m to access the main menu.
Scroll to My Info.
Press O.
Scroll to see your information.
7
Getting Started
See “My Info” on page 82 for more information
about this feature.
Note: The idle screen will not display if your
phone is in Sleep mode.
Phone Basics
Text Area
Display
This area displays menus, messages, names,
phone numbers, and other information.
Any time your phone is powered on, the display
provides you with information and options.
Display Options
status icons
Two display options appear at the bottom of most
screens. You select a display option by pressing
the option key below it.
Menus and Lists
text area
menu icon
display options
Your phone’s features are arranged in menus,
submenus, and lists.
To access the items in a menu or list, scroll using
the navigation key at the top of your keypad. This
key lets you scroll up, down, left, or right. Holding
down the appropriate part of the navigation key
speeds up scrolling.
In this guide, this symbol > tells you to select a
menu or list item. For example, Settings >
Security means:
The screen shown is the idle screen. The text that
appears on your idle screen depends on your
service provider. The idle screen appears when
your phone is on, but not engaged in any activity.
8
1 Scroll to Settings on the main menu.
2 Press O to see the Settings screen.
3 Scroll to Security.
Phone Basics
4 Press O to see the Security screen.
OK Key
Pressing O:
•
•
•
•
Selects the highlighted menu item or list item
Sets options
Confirms actions
Places and answer calls
m Ring Tones
Assign ring tones and turn
ringer off. See page 54.
m
Access stored pictures
and audio recordings. See
page 68.
Media Center
c VoiceRecord
Record and play audio
messages. See page 84.
j My Info
Access personal phone
information, including
phone number and Private
ID. See page 82.
l GPS
Find your approximate
geographical location. See
page 101.
Main Menu
d Contacts
All your phone’s features can be accessed through
the main menu. You can set the main menu to
appear as a list or as large icons.
Create, view, store, edit
Contacts and SDG lists.
See page 27 and page 46.
e Messages
Access messages. See
page 60.
a Browser
Browse the Web.
f Call Forward
q Java Apps
Java applications on your
phone. See page 87.
Set call forwarding
options. See page 36.
o Datebook
b
Customize your phone.
See page 117.
Schedule appointments.
See page 111.
Menu Key
Many features provide context-sensitive menus
that let you access related features and actions.
This icon S appears any time a context-sensitive
menu is available. Press m to access the menu.
Settings
9
Getting Started
g Memo
Store a number to access
later. See page 53.
h Call Timers
Phone usage information.
See page 41.
i Recent Calls
Lists recent calls. See
page 23.
s Shortcuts
Create shortcuts to
screens. See page 130.
p Profiles
Groups of settings you
apply together. See
page 125.
k Call Alert
Lists call alerts. See
page 21.
B Bluetooth
Connect to a device with
Bluetooth. See page 93.
Status Icons
Status icons appear at the top of the display. Some
appear at all times. Others appear only when your
phone is engaged in certain activities or when you
have activated certain features.
abcd Battery Strength — A fuller battery
efgd indicates a greater charge.
opqr
s
Signal Strength — More bars next
to the antenna indicate a stronger
signal.
A
Phone In Use — Your phone is
active on a phone call.
B
Private In Use — Your phone is
active on a Private call.
C
Talkgroup In Use — Your phone is
active on a group call.
S
SDG In Use— Your phone is active
on a SDG call.
Quick Access to Main Menu Items
Each arrow in the navigation key and O can be
used to access a main menu item from the idle
screen. Each of these keys is assigned to a main
menu item when you receive your phone. To
assign different main menu items, see “Personalize
Features” on page 122.
10
Note: Selective Dynamic Group
Calling (SDGC) may not
be offered by your service
provider.
Phone Basics
B
1
Bluetooth In Use — Your phone is
using Bluetooth. If this icon is
blinking, then your phone is in
discoverable mode. If this icon is
static, then your phone is active in a
Bluetooth connection.
2
Active Phone Line — 1 indicates
phone line 1 is ready to make calls;
2 indicates phone line 2 is ready to
make calls.
DE
Internet — You are ready to
browse the internet.
c
Voice Record — You have one or
more voice records stored. See
page 84.
U
Airplane Mode — Your phone is
set to airplane mode. See
page 120.
G J
H K
I L
Call Forward — Your phone is set
to forward calls. See page 36.
Y Z
Packet Data — You are ready to
transfer packet data or are
transferring packet data. See
page 42.
QRM
Ringer Off — Your phone is set not
to ring. See page 54.
N
u
Speaker Off — Sounds associated
with Private calls and group calls
are set to come through the
earpiece rather than through the
speaker.
TTY — You are ready to use your
phone to make calls using a
teletypewriter device. See page 43.
w xT
yz
Messages — You have one or
more messages. See page 60.
t
O
Roaming — You are using your
phone outside your carrier's
network.
Entering Numbers From the Keypad
To enter numbers at the idle screen or any screen
that requires you to enter numbers, press the
numbers on the keypad.
11
Getting Started
If you make a mistake:
• To clear a digit, press A under Delete.
• To clear all digits, press and hold A under
Delete.
• To insert or delete a digit anywhere in the string
of digits you have entered, scroll left or right.
• To cancel, press e.
SIM Card Security
Your SIM card stores all your Contacts and
protects your personal information. Since this
information is stored on your SIM card, not in your
phone, you can remove the information by
removing your SIM card.
Note: Except for making emergency calls, your
phone will not function without the SIM
card.
To prevent unauthorized use of your phone, your
SIM card may be protected by a PIN that you enter
each time the phone is powered on. You can
change the PIN or turn off the requirement that it
be entered.
Entering the PIN
You may be required to enter a SIM PIN when you
first use your phone.
12
When you receive your phone, the SIM PIN is
0000. Change your PIN to prevent fraudulent use
of the SIM card.
Important: If you enter your PIN incorrectly 3 times,
your SIM card is blocked. To unblock
your SIM card, you must contact your
service provider. See “Unblocking the
PIN” on page 13.
1 When the Enter SIM PIN Code screen appears,
enter your SIM PIN. An asterisk appears for
each character entered.
2 Press A under Ok.
Changing the PIN
1 From the main menu, select Settings >
Security > Change Password > SIM PIN.
2 At the Enter Old SIM PIN screen, enter the
current SIM PIN.
3 Press A under Ok.
4 At the Enter New SIM PIN screen, enter the
new 4- to 8-digit SIM PIN.
5 Press A under Ok.
6 At the Re-enter New SIM PIN screen, re-enter
the new SIM PIN to confirm.
7 Press A under Ok.
SIM Card Security
Turning the PIN Requirement On and
Off
When the SIM PIN requirement is on, you are
prompted to enter your PIN each time you turn on
your phone.
Note: If a SIM PIN is required, your phone will
not function until the SIM PIN is entered,
except for making emergency calls.
When the PIN requirement is off, your phone can
be used without entering a PIN.
Important: When the SIM PIN requirement is off,
the personal data on your SIM card is
not protected. Anyone can use your
phone and access your personal data.
1 From the main menu, select Settings >
Security > SIM PIN.
2 Select On or Off.
3 Enter the current SIM PIN.
4 Press A under Ok.
Unblocking the PIN
If you enter your PIN incorrectly 3 times, your SIM
card is blocked. To unblock your SIM card, you
must contact your service provider to get a PIN
Unblock Code (PUK).
Important: If you unsuccessfully enter the PUK
code 10 times, your SIM card is
permanently blocked and must be
replaced. If this happens, all data is
lost. You will get a message to contact
your service provider. Except for
making emergency calls, your phone
will not function with a blocked SIM
card.
To unblock the PIN:
1 Press * # m 1.
2 At your service provider representative’s
request, provide the information needed to give
you a PUK code.
3 Select Unblock PIN.
4 Enter the PUK code.
5 Enter a new 4- to 8-digit SIM PIN.
6 Re-enter your SIM PIN.
If you entered the codes properly, SIM Unlocked
appears on the display.
Inserting and Removing Your SIM
Card
Important: Do not touch the gold-colored areas of
your SIM card.
13
Getting Started
Switching SIM Cards
Moving your SIM card from one phone to another
moves all your Contacts information, but erases
other information. If you remove your SIM card and
use it with another phone, or use another SIM card
with your phone, the following information is
erased:
•
•
•
•
•
•
•
•
•
•
•
The recent calls list
Call forwarding settings
Net alerts
MOSMS drafts, outbox messages, and
customized quick notes
Pictures and audio recordings in the media
center, except those that are forward locked
Voice records
Voice names
Datebook events
Options set using the Personalize menu
Information stored in Memo
3 most recent GPS Enabled locations
14
Note: In some cases, Contacts and SDG lists
may not be accessible if you move your
SIM card to another phone. Contacts and
SDG lists created with your i605 phone
are not readable by an older iDEN
SIM-based phone.
Inserting Your SIM Card
1 With your phone powered off, remove the
battery door and battery.
2 Hold your SIM card as shown. Do not touch the
gold-colored area.
cut corner
Antenna
3 Carefully slide your SIM card into your phone,
until it lies flat in the SIM card holder.
2 While holding the tab down, slide your SIM card
out of the SIM card holder.
SIM card
holder
SIM card
holder
Removing Your SIM Card
Important: To avoid loss or damage, do not remove
your SIM card from your phone unless
absolutely necessary.
1 With your phone powered off, remove the
battery door and battery.
Note: Protect your SIM card as you would any
delicate object. Store it carefully.
Antenna
The retractable antenna on your i605 phone is
designed to be extended during calls.
To extend the antenna, pull gently on the rounded
tip until the antenna is fully extended and clicks into
position.
When finished with a call, retract the antenna by
pushing gently on the rounded tip until the antenna
clicks into place.
15
Getting Started
To optimize your phone’s performance, extend the
antenna when you make or receive a call, and
avoid touching the antenna with any body part.
Note: When you place your i605 phone into the
holster, your phone goes into Sleep
mode.
For More Information
If you have questions about your i605 phone,
contact your sales representative or your service
provider.
Important: Failure to fully extend or retract the
antenna until the antenna clicks into
place causes severely degraded
performance, which may result in
missed calls, dropped calls, or garbled
audio.
Accessories
To order accessories, log on to our Web site at
www.motorola.com/store/iden or contact your
Motorola Authorized Retailer.
16
Making Calls
Your i605 phone makes two types of calls: digital
cellular phone calls and Private calls. With Private
calls, you use your phone as a long-range, digital
walkie-talkie.
Phone Calls
1 Enter the number you want to call.
2 To place the call:
Tip: To let someone know you want to talk to
him or her on a Private call, send a call
alert. See “Call Alerts” on page 21.
Receiving Calls
Phone Calls
When you receive a phone call, your phone rings,
vibrates, or lights up its backlight.
Answering
Press s. -or-
Press s. -or-
If you entered the number from the idle screen,
press O.
Press O. -or-
3 To end the call, press e.
Press A under Yes. -orPress any number key.
Private Calls
Sending to Voice Mail
1 Enter the Private ID you want to call.
2 Press and hold the PTT button on the side of
your phone. Begin talking after your phone emits
a chirping sound.
3 Release the PTT button to listen.
4 To end the call, press e. -or-
Ending
Press A under Exit.
A Private call ends automatically if there is no
activity on the call for a few seconds.
Press e. -orPress A under No.
Press e.
Private Calls
When you receive a Private call, your phone emits
a chirping sound or vibrates.
17
Making Calls
Answering
1 Wait for the caller to finish speaking.
2 Press and hold the PTT button on the side of
your phone. Begin talking after your phone emits
a chirping sound.
3 Release the PTT button to listen.
Ending
Press e. -orPress A under Exit.
A Private call ends automatically if there is no
activity on the call for a few seconds.
Choosing a Number to Call
You can choose the number you want to call in
many ways:
• Enter the number on the keypad. See “Entering
Numbers From the Keypad” on page 11.
• Say a voice name into your phone. See “Using a
Voice Name”.
• Use Speed Dial or Turbo Dial® to make a phone
call. See “Using Speed Dial and Turbo Dial®” on
page 19.
• Redial the last phone number called. See
“Redialing the Last Number” on page 19.
18
• Select the number from the recent calls list. See
“Making Calls From the Recent Calls List” on
page 25.
• Select the number from Contacts. See “Making
Calls From Contacts” on page 34.
• Select a number stored in Datebook. See
“Making Calls From Datebook and Datebook
Reminders” on page 115.
• Use One Touch PTT to make a Private call. See
“One Touch PTT” on page 40.
• Use the number in Memo. See “Memo” on page
53.
• Select the number in a text message you have
received. See “Receiving a Message” on page
63.
Using a Voice Name
If you have created a voice name in Contacts for
the number you want to call, you can use the voice
name to enter the number into your phone. See
page 28 for information on voice names.
To use a voice name to enter a number:
1 Press and hold t until a prompt appears
telling you to say the voice name.
2 Speaking into the microphone, say the voice
name assigned to the number you want to call.
Missed Phone Calls
Your phone plays the name back to you.
3 If you are making a phone call, the call is placed
automatically.
Tip: To stop a phone call from being completed,
press e.
If you are making a Private call, press and hold
the PTT button to place the call.
Using Speed Dial and Turbo Dial®
Each phone number stored in Contacts is assigned
a Speed Dial number, which you can use to call
that number.
Speed Dial
1 From the idle screen, use the keypad to enter
the Speed Dial number assigned to the phone
number you want to call.
2 Press #.
3 Press s.
Turbo Dial
From the idle screen, press and hold the Speed
Dial number (1 through 9) assigned to the phone
number you want to call.
Redialing the Last Number
Press and hold s to place a call to the last phone
number you called.
Missed Phone Calls
When you miss a call, this icon V and the number
of phone calls you have missed appear briefly.
If you want to dismiss the missed call message,
press A under Back. -orIf you want to view the missed call on the recent
calls list, press A under View.
Using Speakerphone
Turning on speakerphone makes incoming sound
come out of the phone’s speaker instead of the
earpiece. Speakerphone is available whenever you
are on an active phone call.
To turn speakerphone on or off:
Press A under Spkr. -orPress t.
19
Making Calls
Using Mute
Muting calls lets you listen to incoming sound
without transmitting sound. Mute is available
whenever you are on an active call.
To turn mute on:
Press A under Mute.
While mute is on, Unmute appears as a display
option.
To turn mute off:
Press A under Unmute.
Making Emergency Phone
Calls
Your phone supports emergency calling.
Emergency phone calls can be made even when
your SIM card is blocked or not in your phone.
Dial 911 to be connected to an emergency
response center. If you are on an active call, you
must end it before calling 911.
When you make an emergency call, your phone’s
GPS Enabled feature can help emergency service
personnel find you, if you are in a location where
your phone's GPS antenna has established a clear
view of the open sky and your local emergency
20
response center has the equipment to process
location information. See “GPS Enabled” on page
101, and particularly “IMPORTANT: Things to
Keep in Mind” on page 101 and “Making an
Emergency Call” on page 102, for more
information on the limitations of this feature.
Because of the limitations of this feature, always
provide your best knowledge of your location to the
emergency response center when you make an
emergency call.
Important: Emergency calls cannot be placed
while the keypad is locked.
Important: If you have not registered on the
network, emergency calls cannot be
placed while your SIM card is in your
phone.
Call Alerts
Receiving Call Alerts
Sending a call alert lets the recipient know you
want to talk to him or her on a Private call.
When you receive a call alert, you must answer,
queue, or clear it. You cannot receive phone calls
or Private calls until you do.
When you send a call alert, the recipient’s phone
emits a series of beeps, or vibrates, and displays
your name or Private ID.
The recipient can:
• Answer — begin a Private call with the sender
• Queue — store the call alert to the call alert
queue, which is a list of call alerts
• Clear — dismiss and delete the call alert
Sending Call Alerts
1 Enter the Private ID you want to send to, as you
would when making a Private call.
2 Press A under Alert. Ready to Alert appears
on the display.
3 Press the PTT button until Alert Successful
appears on the display.
Note: If the alert is not successful, this may
mean the person you are trying to reach is
on a call or has the phone turned off.
To answer a call alert:
Press the PTT button to make a Private call to
the sender.
To queue a call alert:
Press A under Queue.
To clear a call alert:
Press O. -orPress A under Clear.
Note: The recent calls list also stores call alerts
you have received. They appear as
Private calls. Call alerts remain in your
recent calls list until you delete them or
until they reach the end of the list.
Using the Call Alert Queue
When you queue a call alert, it remains in the call
alert queue until you make a Private call to the
sender or delete it.
21
Call Alerts
Viewing Call Alerts
4 Press the PTT button until Alert Successful
appears on the display.
1 From the main menu, select Call Alert.
2 Scroll through the list.
Deleting Call Alerts
Viewing Date and Time
To delete a call alert from the queue:
To view the date and time a call alert was received:
1 From the call alert queue, scroll to the call alert
you want to delete.
2 Press m.
3 Select Delete.
4 Press O or press A under Yes to confirm.
1 From the main menu, select Call Alert.
2 Select the call alert you want information on.
Responding to Call Alerts in the
Queue
After you queue a call alert, you can respond to it
by making a Private call to the sender or sending a
call alert to the sender.
Making a Private Call to the Sender
1 From the main menu, select Call Alert.
2 Scroll to the call alert you want to respond to.
3 Press the PTT button to begin the call.
This removes the call alert from the queue.
Sending a Call Alert to the Sender
1 From the main menu, select Call Alert.
2 Scroll to the call alert you want to respond to.
3 Press A under Alert. Ready to Alert appears
on the display.
22
To delete all call alerts from the queue:
1 From the call alert queue, press m.
2 From the call alert menu, select Delete All.
3 Press O or press A under Yes to confirm.
Sorting Call Alerts
Tip: You must have at least one call alert in the
queue to access this feature.
To sort call alerts by the order they were received:
1
2
3
4
From the main menu, select Call Alert.
Press m.
Select Sort By.
Select First on Top or Last on Top.
Recent Calls
The recent calls list stores information associated
with calls you have made and received and call
alerts you have received. It also stores My Info and
contact information sent to you from other phones.
The recent calls list stores up to 20 items.
Calls and Call Alerts
The recent calls list stores the numbers of up to 20
of the most recent calls you have made and
received.
If the number of a recent call is stored in Contacts,
the following information appears:
• The name assigned to the number
• The picture assigned to the number, if your
phone is set to show pictures on the recent calls
list.
• The Contacts type icon associated with the
number. If the Contacts entry containing the
number has more than one number or address
stored, <> surrounds the Contacts type icon.
The Private ID Contacts type icon appears when
you receive a Private call or call alert, even if the
number is not stored in Contacts.
Call alerts you have received appear as Private
calls. Like all items in the recent calls list, they
remain listed until you delete them or until they
reach the end of the list.
For phone calls, an additional icon appears giving
information about the call:
X A call you made.
W A call you received.
V A missed call. Missed calls appear on the
recent calls list only if you have Caller ID.
When you select a call to view its details, you see
information such as the name associated with the
call, the number, date, time, and duration of the
call.
My Info From Other Phones
The recent calls list stores My Info from other
phones.
This icon j appears with My Info from other
phones on the recent calls list, along with the
Private ID of the person who sent the information.
When you select My Info from other phones to view
its details, you see all the information sent.
23
Recent Calls
If you receive My Info from the same phone more
than once, only the most recently sent version
appears in the recent calls list.
Contact Information From
Other Phones
The recent calls list stores contact information sent
from other phones. This information comes from
the other phone’s Contacts list or recent calls list.
This icon d appears with contact information on
the recent calls list.
Contact information in the recent calls list displays:
• The name contained in the contact information
• The Contacts type icon associated with the
number or address contained in the contact
information. If the item contains more than one
number or address stored, <> surrounds the
Contacts type icon.
The name or Private ID of the person who sent the
contact information appears as a separate item on
the recent calls list, above the information sent. If
one person sends you more than one item of
contact information, all the items appear below the
person’s name or Private ID.
When you select contact information to view its
details, you see the name or Private ID of the
person who sent the information and all the
information in the item.
If you receive contact information with the same
name from the same phone more than once, only
the most recently sent version appears in the
recent calls list.
Viewing the Recent Calls List
1 From the idle screen, press the navigation key
as if scrolling down. -orFrom the main menu, select Recent Calls.
2 Scroll through the list.
To view the details of an item on the list:
From the recent calls list, select the item you
want information on.
Tip: To view the details of more items, keep
scrolling.
Choosing Picture View or List View
You can set your phone to show the picture
associated with each item as you view the recent
calls list or show the list without pictures.
1 From the recent calls list, press m.
24
Storing Items to Contacts
2 Select Recent Calls View.
3 Select List View to show the recent calls list
without pictures. -orSelect Picture View to show the picture
associated with each entry.
Storing Items to Contacts
1 From the recent calls list, scroll to or select the
item you want to store.
2 Press A under Store. -orIf Store is not one of your options: Press m.
Select Store or Update Contacts.
Tip: If the item you want to store is a call, Store
does not appear if the number is already
stored in Contacts.
3 To store the item as a new entry, select [New
Contact]. -orTo store the number to an existing entry, select
the entry.
Note: Storing My Info or contact information
from another phone to a Contacts entry
that has a name assigned to it does not
change the name of the Contacts entry.
4 If the item you want to store is a call, you must
assign a Contacts type to the number:
With the Contacts type field highlighted, scroll
left or right to display the Contacts type you want
to assign the number.
5 Press A under Save.
Deleting Items
To delete an item from the recent calls list:
1 From the recent calls list, scroll to or select the
item you want to delete.
2 Press A under Delete. -orIf Delete is not one of your options: Press m.
Select Delete.
3 Press O or press A under Yes to confirm.
To delete all items on the recent calls list:
1 From the recent calls list, press m.
2 Select Delete All.
3 Press O or press A under Yes to confirm.
Making Calls From the Recent
Calls List
1 From the main menu, select Recent Calls.
2 Scroll to the item containing the number you
want to call.
25
Recent Calls
• If you scroll to a call, you can make a call to
the number that made the call. If the number
is stored in Contacts, you can make a call to
any of the numbers stored with it.
• If you scroll to My Info from another phone,
you can make a call to the Private ID of the
phone that sent the information.
• If you scroll to contact information from
another phone, you can make a call to any of
the numbers in the contact information.
3 To place the call now, go to step 4. -orScroll left or right to display the Contacts type for
the number you want to call.
4 To make a phone call, press s. -orTo make a Private call, press the PTT button.
You can also make calls while viewing the details
of an item on the recent calls list:
1 From the recent calls list, select the item
containing the number you want to call.
• If you select a call or contact information from
another phone, you can make a call to the
number shown first on the details screen.
• If you scroll to My Info from another phone,
you can make a call to the Private ID of the
phone that sent the information.
26
2 To make a phone call, press s. -orTo make a Private call, press the PTT button.
Contacts
Contacts stores up to 600 numbers or addresses.
Each Contacts entry can store several numbers or
addresses.
Information stored in Contacts is saved on your
SIM card.
A Contacts entry contains:
• A name — A name is required if you are storing
more than one number or address to the entry;
otherwise, it is optional. Typically, this is the
name of the person whose contact information is
stored in the entry.
• A ring tone — This is the sound your phone
makes when you receive phone calls or call
alerts from any of the numbers stored in the
entry. You can assign the ring tone from your list
of ring tones. If you do not assign a ring tone, the
entry is created with a default ring tone
assigned.
• A picture — This picture appears on the display
when you receive phone calls from any of the
phone numbers stored in the entry. You can
assign the picture from the pictures stored in the
media center. If you do not assign a picture, the
entry is created with no picture assigned.
• A Contacts type — Each number or address
stored must be assigned a Contacts type:
A
Mobile
phone number
B
Private
Private ID
C
Work1
phone number
D
Work2
phone number
E
Home
phone number
F
Email
email address
G
Fax
phone number
H
Pager
phone number
I
Talkgroup
Talkgroup number
S
SDG
SDG list
J
IP
IP address
K
Other
phone number
• A number or address — Each Contacts entry
must contain a number or address. This may be
any type of phone number, Private ID, Talkgroup
number, SDG list, email address, or IP address.
27
Contacts
Note: You can store numbers up to 64 digits
long, but every 20 digits must be
separated by a pause or wait. See
“Creating Pauses and Waits” on page 33.
• A Speed Dial number — When you store a
phone number, it is assigned a Speed Dial
number. You can accept the default Speed Dial
number or change it.
• A voice name — If you create a voice name for a
number, you can then dial that number by
saying the voice name into your phone. This
icon P appears to the left of the Contacts type
icon if a voice name is assigned.
Accessing Contacts
From the main menu, select Contacts. -orIf you are on a call: Press m. Select Contacts.
Creating Entries
A number or address and a Contacts type are
required for all Contacts entries. Other information
is optional. You may enter the information in any
order by scrolling through the entry details.
After you have entered the number or address,
Contacts type, and any other information you want,
you can press A under Save to save the entry to
Contacts.
28
To cancel a Contacts entry at any time, press e to
return to the idle screen.
To create a Contacts entry:
1 To access the entry details screen:
Select Contacts > [New Contact]. -orFrom the Contacts list, press m. Select New.
2 If you want to assign a name to the entry:
Select Name.
Enter the name. When you are finished, press
O.
Tip: Press A under Browse to select a name
already in Contacts.
3 If you want to assign a ring tone or picture to the
entry, select [Ring Tone/Picture]. See
“Assigning a Ring Tone or Picture” on page 29.
4 To assign a Contacts type to the number or
address being stored:
Select the Contacts type field.
Select the Contacts type you want to assign.
5 To store a number or address:
Select the # field (or ID for an email address, or
IP for an IP address).
Creating Entries
Enter the number or address. For phone
numbers, use the 10-digit format. For email
addresses, see “Entering Text” on page 58.
Tip: Press A under Browse to select a
number or address from Contacts, the
recent calls list, or Memo.
When you are finished, press O.
6 If you want to change the default Speed Dial
number or a create a voice name for the entry,
select [Options]. See “Assigning a Speed Dial
Number or Voice Name”.
7 If you want to add more numbers or addresses
to the entry:
Scroll past the information you already entered.
Enter the additional information for the entry
using step 3 through step 6. You must assign a
name to the entry, if you have not already.
8 Press A under Done.
Assigning a Ring Tone or Picture
1 If you have not already, select [Ring
Tone/Picture].
2 If you want to assign a ring tone from the list of
ring tones:
Select Ringer. Select the ring tone you want to
assign.
3 If you want to assign a picture from the media
center:
Scroll to Picture. Scroll left or right to choose a
picture. -orSelect Picture. Select the picture you want to
assign.
Only pictures that can be assigned to Contacts
entries are displayed. Some large pictures
cannot be assigned.
Tip: If an entry has a picture assigned and you
want the entry to have no picture, select
[No Picture] or press A under Unassign.
4 When you are finished, press A under Back.
Assigning a Speed Dial Number or
Voice Name
1 If you have not already, select [Options].
2 The default Speed Dial number assigned to a
phone number is displayed in the Speed # field.
This is always the next available Speed Dial
location.
With Ringer highlighted, scroll left or right to
choose a ring tone. -or29
Contacts
If you want to assign the phone number to a
different Speed Dial location:
With the Speed # field highlighted, press O.
Press A under Delete to delete the current
Speed Dial number.
Enter the new Speed Dial number using the
keypad.
When you are finished, press O.
3 If you want to create a voice name for a phone
number, select Voice Name.
As directed by the screen prompts, say and
repeat the name you want to assign to the
number. Speak clearly into the microphone.
4 When you are finished, press A under Back.
Storing Numbers From the
Idle Screen
To store numbers to Contacts from the idle screen:
1 Use the keypad to enter the number you want to
store.
2 Press m.
3 Select Store Number.
4 To store the number as a new entry, select [New
Contact]. -or30
To store the number to an existing entry, select
the entry.
5 With the Contacts type field highlighted, scroll
left or right to display the Contacts type you want
to assign the number.
6 Press A under Done.
Editing Entries
1 From the Contacts list, scroll to or select the
entry you want to edit.
2 Press A under Edit. -orIf Edit is not one of your options: Press m.
Select Edit.
The entry details screen displays.
3 Follow the applicable instructions in “Creating
Entries” on page 28 to edit the various fields.
Viewing Entries
When you view Contacts entries, you can choose
how much detail you want to see.
Viewing the Contacts List
In this view, each entry shows:
• The name assigned to the entry
Viewing Entries
• A small version of the picture assigned to the
entry, if you have set Contacts to show pictures
in the Contacts list.
• The types of numbers and addresses stored in
the entry
To view entries from the Contacts list:
To select an entry:
1 From the Contacts list, select the entry you want
to view.
2 Scroll to view the numbers and addresses
stored in the entry.
Tip: To select other entries: Scroll left or right.
Or, press # or *.
1 Access Contacts.
2 Scroll to view entries.
Tip: To find Contacts entries faster, use the
keypad to enter the first letter of the name.
To return to the Contacts list, press A under
Back.
3 If an entry has more than one number or
address stored, <> surrounds the Contacts type
icon. Scroll left or right to view the icon for each
number stored in the entry.
When an entry is selected, you can view more
details about the entry by selecting items within the
entry.
Selecting an Entry
In this view, each entry shows:
• The name assigned to the entry
• A small version of the picture assigned to the
entry
• The name of the ring tone assigned to the entry
• The numbers and addresses stored in the entry
Viewing More Details
Viewing Details of a Number or Address
1 Select the entry.
2 Select the number or address you want to view
details of.
If you select a phone number, you can view its
Speed Dial number and see whether it has a
voice name.
To return to the entry, press A under Back or
press O.
31
Contacts
Viewing a Large Picture
Searching for a Name
To view a large version of the picture assigned to
an entry:
To search for a name in Contacts:
1 Select the entry.
2 Select the first item shown on the entry screen.
This item shows the name assigned to the entry
or No Name.
Note: You cannot make calls from this view.
To return to the entry, press A under Back or
press O.
Choosing Picture View or List View
You can set Contacts to show the picture assigned
to each entry as you view the Contacts list or show
the Contacts list without pictures.
1 From the Contacts list, press m.
2 Select Contact View.
3 Select List View to show the Contacts list
without pictures. -orSelect Picture View to show the picture
assigned to each entry.
32
1 From the Contacts list, press A under Search.
-orIf Search is not one of your options: Press m.
Select Search.
2 Enter the name you want to see.
3 Press O.
Your phone finds the name you entered or the
nearest match.
Showing Only Private IDs,
Talkgroups, and SDG Lists
To set Contacts to show only entries that contain
Private IDs, Talkgroup entries, and SDG lists:
1 From the Contacts list, press m.
2 Select Filter.
3 Set this option to Show Prvt/Grp.
To set Contacts to show all entries:
1 From the Contacts list, press m.
2 Select Filter.
3 Set this option to Show All.
Deleting Entries
Deleting Entries
Checking Capacity
Delete an Entry
To see how many numbers are stored in Contacts:
1 From the Contacts list, scroll to or select the
entry you want to delete.
2 Press m.
3 To delete the entire entry, select Delete
Contact.
4 Press O or press A under Yes to confirm.
Creating Pauses and Waits
Delete a Number or Address
1 From the Contacts list, scroll to the entry that
contains the number or address you want to
delete.
2 Scroll left or right to display the Contacts type for
the number you want to delete. -orSelect the entry. Scroll to or select the number
you want to delete.
3 Press m.
4 Select Delete Number.
5 Press O or press A under Yes to confirm.
Note: If an entry contains only one number or
address, deleting the number or address
deletes the entry.
1 From the Contacts list, press m.
2 Select Capacity.
When storing a number, you can program your
phone to pause or wait between digits while
dialing. A pause makes your phone pause for 3
seconds before dialing further. A wait makes your
phone wait for your response before dialing further.
This feature is useful when using voice mail or
other automated phone systems that require you to
dial a phone number and then enter an access
number.
To program a pause:
Press and hold * until the letter P appears. The
P represents a 3-second pause.
If you store 17035551235P1234, when you select
this number and make a call, your phone dials the
first 11 digits, pauses for 3 seconds, then dials the
last 4 digits.
If you want a pause longer than 3 seconds, press
and hold * more than once. Each P represents a
3-second pause.
33
Contacts
To program a wait:
Press and hold * until the letter W appears.
The W means your phone waits before dialing
further.
If you store 17035551235W1234, when you select
this number and make a call, your phone dials the
first 11 digits and then waits. A message appears
asking if you want to send the rest of the digits.
Press A under Yes to dial the last 4 digits.
Tip: You can create pauses and waits while
dialing a number from the keypad. See
“Creating Pauses and Waits While Dialing”
on page 40.
International Numbers
Note: This feature may not be offered by your
service provider.
When storing a number that you plan to use for
international calls, use Plus Dialing:
1 Press and hold 0 for two seconds. A “0”
appears, then changes to a “+”.
Note: The network translates the “+” into the
appropriate international access code
needed to place the call.
2 Enter the country code, city code or area code,
and phone number.
34
For information about making international calls,
see “Making International Calls” on page 40.
Making Calls From Contacts
While Viewing the Contacts List
1 Access Contacts.
2 Scroll to the name or number you want to call.
Tip: To find Contacts entries faster, use the
keypad to enter the first letter of the name.
3 To place the call now, go to step 4. -orScroll left or right to display the Contacts type for
the number you want to call.
4 To make a phone call, press s. -orTo make a Private call, press the PTT button.
If you are making a Private call, your phone places
the call to the Private ID stored in the Contacts
entry, even if the Private icon is not displayed.
If you are making a phone call:
• Your phone places the call to the phone number
assigned to the Contacts type displayed.
• If the Contacts type displayed is not a phone
number, your phone places the call to the phone
number stored in the Contacts entry.
Accessing Contacts with GSM Phones
• If the Contacts type displayed is not a phone
number and you have more than one phone
number stored in the Contacts entry, your phone
prompts you to select the phone number you
want to place the call to.
You can use iDEN Phonebook Manager to make
the Contacts information saved to your i605
phone’s SIM card accessible in this type of phone.
After Selecting an Entry
1 Access Contacts.
2 Select the Contacts entry that contains the
number you want to call.
3 Scroll to or select number you want to call.
4 To make a phone call, press s. -orTo make a Private call, press the PTT button.
If you try to make a type of call that does not match
the Contacts type of the number you chose, no call
is placed.
Accessing Contacts with GSM
Phones
If you plan to use the information stored in
Contacts with an i2000, i2000plus, or any other
GSM phone, download iDEN Phonebook Manager.
Go to idenphones.motorola.com/iden/support for
more information.
35
Call Forwarding
Call forwarding sends calls to the phone numbers
you specify. You can forward all calls to one
number or forward missed calls to different
numbers depending on the reason you missed the
call. You can forward phone lines 1 and 2
independently.
Forwarding All Calls
When you set your phone to forward all calls, an
icon appears in the top row of the display:
G Phone line 1 is active; calls to phone line 1
are being forwarded.
I Phone line 1 is active; calls to phone line 2
are being forwarded.
H Phone line 1 is active; calls to phone lines 1
and 2 are being forwarded.
J Phone line 2 is active; calls to phone line 1
are being forwarded.
L Phone line 2 is active; calls to phone line 2
are being forwarded.
K Phone line 2 is active; calls to phone lines 1
and 2 are being forwarded.
36
To forward all calls:
1 From the main menu, select Call Forward >
Forward > All Calls.
2 Select To.
If you specified a forwarding number for all calls
before, this number displays.
To forward calls to this number, press A under
Back.
To delete this number, press O, then press and
hold A under Delete.
3 To enter the number you want to forward calls to:
Enter the number using your keypad. -orPress A under Search. Select Contacts,
Recent Calls, or Memo. Select the number you
want to enter.
4 Press O.
All your calls are now forwarded to the number you
specified.
Turning Off Call Forwarding
If you do not want all your calls forwarded, turn the
feature off:
1 From the main menu, select Call Forward > To.
2 Set this option to Off.
Forwarding Missed Calls
All your calls are now sent to your phone.
Calls you miss are forwarded according to the
options set for missed calls. By default, missed
calls are forwarded to voice mail.
Note: To receive voice mail messages, you must
first set up a voice mail account with your
service provider.
Forwarding Missed Calls
You can specify a forwarding number for each type
of missed call:
• If Busy — Your phone is on a call or transferring
data.
• If No Answer — You do not answer on the first
4 rings.
• If Unreachable — Your phone is out of
coverage or powered off.
Note: If you want a type of missed call sent to
voice mail, the call forwarding number for
that type of missed call must be your
voice mail access number.
To forward missed calls:
1 From the main menu, select Call Forward >
Forward > Detailed.
2 Select If Busy to specify a forwarding number
for calls received when your phone is busy.
3 If you specified a forwarding number for this type
of call before, this number displays.
To forward calls to this number, press A under
Back and go to step 6. -orTo delete this number, press O, then press and
hold A under Delete.
4 To enter the number you want to forward this
type of call to:
Enter the number using your keypad. -orPress A under Search. Select Contacts,
Recent Calls, or Memo. Select the number you
want to enter.
5 Press O.
6 Repeat step 2 through step 5 for If No Answer
and If Unreachable.
7 When you are finished, press A under Back.
Viewing Call Forwarding
Settings
1 From the main menu, select Call Forward >
Forward > All Calls.
2 With To highlighted, press A under Status.
37
Advanced Calling
Features
Call Waiting
Call Waiting lets you receive a second call while on
an active call. Call Waiting is always available,
unless you turn it off for a specific call.
If you are on a call and receive a second call, your
phone emits a tone and displays a message saying
you are receiving a second call.
To accept the second call and put the active call on
hold:
Press A under Yes.
To accept the second call and end the active call:
1 Press e.
Your phone rings with the second call.
2 Answer the second call.
To decline the second call:
Press A under No. If you subscribe to voice
mail, the call is forwarded to your voice mail box,
unless you set Call Forward for If Busy to a
different number.
38
Turning Off Call Waiting
To turn off Call Waiting during a call:
1 Press m.
2 Select In Call Setup > Call Waiting.
3 Set this option to Off.
Tip: To turn Call Waiting back on while still on
the call, set this option to On.
To turn off Call Waiting for the next call you make
or receive:
1 From the main menu, select Settings > Phone
Calls > Call Waiting.
2 Set this option to Off.
Call Waiting is turned back on when you end the
call.
Switching Between Calls
Any time you have one call active and one call on
hold, to make the call on hold active and put the
active call on hold:
Press A under Switch. -orIf Switch is not one of your options: Press m.
Select Switch.
Putting a Call on Hold
Putting a Call on Hold
Merging 2 Calls into a 3-Way Call
1 While on an active call, press m.
2 Select Hold.
After you put a call on hold and place a second
call, you can combine these calls into a 3-way call:
If you want to make the call active again, press A
under Resume.
1 Press m.
2 Select Join.
Calling 2 People
All 3 people in the call can speak to and hear each
other.
Putting a Call on Hold, Making a
Second Call
1
2
3
4
Place or receive a phone call.
While the call is active, press m.
Select 2nd Call. This puts the call on hold.
Enter the second phone number you want to
call.
Tip: For quick ways to enter the number, press
m.
Making a 3-Way Call
1
2
3
4
Place or receive a phone call.
While the call is active, press m.
Select 3 Way. This puts the call on hold.
Enter the second phone number you want to
call.
Tip: For quick ways to enter the number, press
m.
5 Press s to place the call.
5 Press s to place the call.
6 Press A under Join.
To end the second call and make the call on hold
active again:
All 3 people in the call can speak to and hear each
other.
Press e.
To make the call on hold active and put the active
call on hold:
Press A under Switch.
39
Advanced Calling Features
Creating Pauses and Waits
While Dialing
You can enter a pause or wait while dialing a
number. For information on using pauses and
waits, see “Creating Pauses and Waits” on page
33.
To create a pause while dialing a phone number:
1 From the keypad, enter the digits you want to
occur before the pause.
2 Press m.
3 Select Insert Pause.
4 Enter the digits you want to occur after the
pause.
Making International Calls
Note: This feature may not be offered by your
service provider.
Plus Dialing lets you place an international call to
most countries without entering the local
international access code.
1 Press and hold 0 for two seconds. A “0”
appears, then changes to a “+”.
Note: The network translates the “+” into the
appropriate international access code
needed to place the call.
2 Enter the country code, city code or area code,
and phone number.
To create a wait while dialing a phone number:
One Touch PTT
1 From the keypad, enter the digits you want to
occur before the wait.
2 Press m.
3 Select Insert Wait.
4 Enter the digits you want to occur after the wait.
One Touch PTT sets your phone to call the most
recent Private ID or SDG list on the recent calls list,
or a Private ID you choose, every time you press
the PTT button.
Setting One Touch PTT
To the Most Recent Private ID or SDG List
1 From the main menu, select Settings > 2-Way
Radio > One Touch PTT.
2 Set this option to Last Call.
40
Call Timers
To a Private ID
1 From the main menu, select Settings > 2-Way
Radio > One Touch PTT > Assigned Number.
2 To enter the Private ID you want your phone to
call every time you press the PTT button:
Enter the number using your keypad. -orPress A under Search. Select Contacts,
Recent Calls, or Memo. Select the number you
want to enter.
Tip: If you are entering a Talkgroup number,
enter # before the number.
3 Press O.
Turning Off One Touch PTT
1 From the main menu, select Settings > 2-Way
Radio > One Touch PTT.
2 Set this option to Off.
Call Timers
Call timers measure the duration of your phone
calls, Private calls, or group calls, and circuit data
use, as well as the number of Kilobytes sent and
received by your phone:
• Phone Reset — keeps a running total of your
phone call minutes, until you reset it.
• Phone Lifetime — displays the total minutes of
all your phone calls.
• Prvt/Grp Reset — keeps a running total of all of
your Private and group call minutes, until you
reset it.
• Prvt/Grp Lifetime — displays the total minutes
of all your Private and group calls.
• Circuit Reset — keeps a running total of all of
your circuit data use, until you reset it.
• Circuit Lifetime — displays the total minutes of
all of your circuit data use.
• Kbytes Reset — keeps a running total of the
number of Kilobytes sent and received by your
phone, until you reset it.
To view or reset a timer:
1 From the main menu, select Call Timers.
2 Select the feature you want to view or reset.
3 To view a feature without resetting: Press O
when you are finished viewing. -orTo reset a feature: Press A under Reset.
Press O or press A under Yes to confirm.
• Last Call — displays the duration of your most
recent phone call.
41
Advanced Calling Features
Note: The values displayed by Call Timers
should not be used for billing. Call timers
are estimates only.
Using Your Phone as a
Modem
Connecting with a Data Cable
To use a data cable to connect your phone with a
laptop, handheld device, or desktop computer:
1 Open the connector cover.
Note: This feature may not be offered by your
service provider.
You can use your phone as a modem with a laptop,
handheld device, or desktop computer. In order to
use your phone as a modem, you must create
either a wired or wireless connection between your
phone and the other device. To connect your
phone wirelessly, you must have a Bluetooth
adapter for the other device. To create a wired
connection, use a data cable.
42
connector
cover
2 With the phone’s display facing up, insert the
data cable’s connector into the accessory
connector, until you hear a click.
Making TTY Calls
3 Insert the data plug into the data port of the
other device.
Connecting with Bluetooth
To use your phone as a modem via Bluetooth, the
laptop, handheld device, or desktop computer you
want to connect with must have a Bluetooth
adapter installed.
Check that the adapter is properly installed, and
then follow the instructions outlined in the device’s
user guide to connect the device to your phone.
About Data Transfer Modes
When used as a modem, your phone has these
data transfer modes:
• Circuit data — used for sending and receiving
faxes and for transferring large files
• Packet data — used for small file transfers such
as email
To use these services, you must install the iDEN
Wireless Data Services software (available
separately). For more information on setting up
your computer and your i605 phone for packet and
circuit data calls, refer to the Wireless Data
Services User’s Guide or contact your service
provider.
Making TTY Calls
Note: This feature may not be offered by your
service provider.
To use your phone to make phone calls using a
teletypewriter (TTY) device:
1 Connect one end of a 2.5mm cable into the
audio jack on your phone. Connect the other
end of the cable to your TTY device.
2 Make sure that your phone’s TTY feature is on
and select the TTY mode you want to use.
3 Use your phone to enter phone numbers and
make calls.
When you make a TTY call, these icons appear on
the phone’s display:
N Phone call is active.
O Phone call is on hold.
TTY device features such as Turbo-Code,
High-Speed, and Interruption are not supported by
your phone. These features must be turned off or
disabled to use your TTY device with your phone.
43
Advanced Calling Features
Turning On the TTY Feature
To change mode during a call using your phone:
Your phone’s TTY feature must be on if you want
to make TTY calls, set the TTY mode, or change
the TTY baud rate. To make sure the TTY feature
is on:
1 Press m.
2 Select In Call Setup > TTY > Type.
3 Select the mode you want.
From the main menu, select Settings > Phone
Calls > TTY > Use TTY. This field must say On.
Choosing a Mode
Your phone supports these TTY modes:
• TTY — You type and read text on your TTY
device.
• VCO (Voice-Carry-Over) — You speak into your
phone and read text replies on your TTY device.
• HCO (Hearing-Carry-Over) — You type text on
your TTY device and listen to voice replies on
your phone speaker.
To change mode during a call using your TTY
device, issue one of the following commands:
• “VCO please” — to select VCO mode
• “HCO please” — to select HCO mode
• “HCO off please” — to turn off HCO mode
Important: When you are using HCO, the sound
coming from your phone speaker may
be uncomfortably loud. Use caution
when putting the phone to your ear.
(For information on setting the volume
of your phone speaker, see “Setting the
Volume” on page 117.)
To change mode while not in a call:
Changing the TTY Baud Rate
1 From the main menu, select Settings > Phone
Calls > TTY > Type.
2 Select the TTY mode you want.
By default, your phone’s TTY baud rate is set to
45.45, the baud rate required for TTY calls within
the U.S. To make calls outside the U.S., set your
TTY baud rate to 50.0.
When you make a TTY call, the call begins in the
TTY mode you last selected.
44
Making TTY Calls
To change the TTY baud rate:
1 From the main menu, select Settings > Phone
Calls > TTY > Baud.
2 Select the baud rate for your location.
45
Group Calls and Selective Dynamic Group Calls
Group Calls and
Selective Dynamic
Group Calls
Group Calls
SDG Calls
Dynamically,
via your phone
Note: Selective Dynamic Group Calling (SDGC)
may not be offered by your service
provider.
Predefined, via
your service
provider
administrator
using Group
Management
Your phone gives you 2 ways to call more than one
Private ID at once:
Group Names Talkgroups I
SDG lists S
• Group calls — calls to a Talkgroup
• Selective Dynamic Group calls — calls to a SDG
list
Note: In order to store SDG lists to your i605,
you must use a SDG-capable SIM card.
For more information about SDG-capable
SIM cards, contact your service provider.
SDG lists created with your i605 phone
are not readable by an older iDEN SIMbased phone.
Voice
Activated
Dialing
Yes
Set-up
No
Group Calls
A group call is similar to a Private call, but is made
to all members of a Talkgroup at once. A Talkgroup
is a predetermined group of your service provider’s
customers.
Before you can make or receive group calls, a
Talkgroup must be established. After the Talkgroup
is established, you must join the Talkgroup.
46
Selective Dynamic Group (SDG) Calls
Joining a Talkgroup
Receiving Group Calls
Your sales representative or your service provider
establishes Talkgroups for you and assigns each
Talkgroup a Talkgroup number. You can choose a
name for each of your Talkgroups when you create
entries for them in Contacts.
To answer a group call:
To receive group calls made to any of these
Talkgroups, you must join the Talkgroup.
1 Press A under Contcs. -orFrom the main menu, scroll to Contacts and
press O.
2 Scroll to the Talkgroup you want to join.
3 Press A under Join.
Note: You can only monitor one Talkgroup at a
time.
Making Group Calls
1 Press #. Then enter the Talkgroup number
using the keypad. -orChoose the Talkgroup name from Contacts or
recent calls list.
2 Proceed as if making a Private call.
Proceed as if answering a Private call. Only one
person at a time may speak on a group call.
The Private ID or name of the person who is
speaking will appear on the display below the
Talkgroup number.
Turning off Group Calls
To set your phone to prevent you from hearing
group calls to your Talkgroup:
1 From the main menu, select Settings > 2-Way
Radio > Tkgrp Silent.
2 Set this option On.
To set your phone to let you hear group calls to
your Talkgroup:
Set Tkgrp Silent to Off in step 2.
Selective Dynamic Group
(SDG) Calls
A SDG call is similar to a Private call, but is made
to all members of a SDG list at once. A SDG list is
a group of Private IDs that you create using your
phone. A SDG list must contain at least 2 members
and can contain up to 20 members.
47
Group Calls and Selective Dynamic Group Calls
You can create a SDG list for one call only or store
it to Contacts so you can call it any time.
You can use Send via PTT to send SDG lists to
other phones that have this capability.
Creating SDG Lists in Contacts
1 From the main menu, select Contacts.
2 Select [New SDG List].
Note: You can also create a SDG list by
selecting [New Contact] and assigning
the SDG contact type.
3 If you want to assign a name to the SDG list,
enter the name.
Note: If you do not assign a name, the SDG list
is named “SDG” followed by the number
of members in the SDG list. For example,
“SDG (8)” for a SDG list with 8 members.
4 Add Private IDs. See “Adding Private Numbers”.
5 If you want to create a voice name for the SDG
list, select [Options] > Voice Name. As directed
by the screen prompts, say and repeat the voice
name you want to assign to the SDG list. Speak
clearly into the microphone.
6 Press A under Save.
48
Adding Private Numbers
You can add Private IDs to a SDG list by selecting
them from Contacts, the recent calls list, or memo.
You can add all members in an existing SDG list by
selecting the list.
You can select more than one member from
Contacts and the recent calls list. A checkmark
appears next to each selected item.
Tip: To deselect an item: Scroll to a selected
item and press O.
You can also enter Private IDs from the keypad.
From Contacts
1 While creating a SDG list, select [Add Member].
-orSelect [Add Number] and press A under
Browse.
A list of the Private IDs and SDG lists stored in
Contacts appears.
2 Select the members you want from the list.
3 Press A under Done.
From the Recent Calls List
1 While creating a SDG list, select [Add Member].
-or-
Selective Dynamic Group (SDG) Calls
Select [Add Number] and press A under
Browse.
Moving Between Contacts, Recent Calls, and
Memo
2 To view the recent calls list, scroll left or right.
-or-
While adding members or numbers to a SDG list,
you can press m to access Contacts, the recent
calls list, or Memo.
Press m and select Recent Calls.
3 Select the members you want from the list.
4 Press A under Done.
To move between Contacts, the recent calls list,
and Memo, select m and then the option you
want.
From Memo
Removing Members or SDG Lists
1 While creating a SDG list, select [Add Member].
-orSelect [Add Number] and press A under
Browse.
2 To view memo, scroll left or right. -orPress m and select Memo.
3 Press O.
From the Keypad
1 While creating a SDG list, select [Add Number].
2 Enter the number using the keypad.
3 Press O.
To remove a member from the SDG list:
1 Scroll to the member you want to remove.
2 Press m.
3 Select Remove Member.
To remove all members from the SDG list:
1 From the SDG list screen, press m.
2 Select Remove All Members.
To delete a SDG list from Contacts:
1 Scroll to the SDG list you want to delete.
2 Press m.
3 Select Delete Contact.
49
Group Calls and Selective Dynamic Group Calls
Storing SDG Lists Faster
2 Press the PTT button.
From the Recent Calls List
Starting a SDG Call with a Private ID
1 From the recent calls list, select the SDG list you
want.
2 Press A under Store.
3 If you want, add more information to the entry.
4 Press A under Save.
You can start a SDG call with any Private ID you
want to call.
From an Active SDG Call
1 During an active SDG call, press m.
2 Select Store SDG.
3 If you want, add more information to the entry.
Note: You cannot record a voice name during
an active call.
4 Press A under Save.
Making SDG Calls
1 From Contacts or the recent calls list, scroll to or
select the SDG list you want. -orPress and hold t until a prompt appears
telling you to say the voice name. Say the voice
name assigned to the SDG list you want. -orEnter or select a Private ID and add more
Private IDs. See “Starting a SDG Call with a
Private ID”.
50
1 Choose the first Private ID that you want in the
SDG call:
From the idle screen, enter the Private ID. -orFrom Contacts or the recent calls list, scroll to an
entry containing the Private ID.
2 Press m.
3 Select Call SDG.
4 Add more Private IDs. See “Adding Private
Numbers” on page 48.
5 If you want to save the SDG list you have
created: Press m. Select Store SDG.
6 To make the call, press the PTT button. -orPress A under Done.
7 Press the PTT button.
Receiving SDG Calls
To answer a SDG call:
Proceed as if answering a Private call. Only one
person at a time may speak on a SDG call.
Selective Dynamic Group (SDG) Calls
SDG Call Information
While you are in a SDG call, the following appears
on the screen:
• The name of the SDG list
• The name or the Private ID of the person
speaking
• The number of participants in the SDG call
SDG Call Details
During a SDG call, you can view details about the
other SDG list members, such as their name or
Private ID, and their status on the call.
To view SDG call details, press A under Details.
In the SDG Call Details view, these icons appear
next to member names or Private IDs:
T The member of the SDG list who is speaking.
A A member of the SDG list who is active on the
SDG call, but not speaking.
O A member of the SDG list who has exited the
call.
U A member of the SDG list who could not be
reached on the SDG call.
u A member of the SDG list whose status is
unknown.
Sending SDG Lists Using Send via
PTT
You can send a SDG list using Send via PTT so
that the person who receives the SDG list can use
the list.
1 From Contact or the recent calls list, scroll to or
select the SDG list you want.
2 Press m.
3 Select Send SDG via PTT.
4 To include yourself in the list, press A under
Yes. -orTo exclude yourself from the list, press A
under No.
Note: If you choose to include yourself and the
list already contains 20 members, you will
be prompted that the list is full. You will be
excluded from the list.
5 Enter the Private ID of the person you want to
send the SDG list to. -or-
51
Group Calls and Selective Dynamic Group Calls
Select Browse to select a contact from
Contacts, the recent calls list, or Memo.
6 Press O.
7 To send the SDG list, push the PTT button.
The SDG list will display in the recent calls list
on the phone that you send the SDG list to.
52
Memo
Memo lets you store a number, make a call to that
number, and save it to Contacts.
To create a memo:
1 From the main menu, select Memo.
2 Enter the number using your keypad.
3 Press O.
To view the memo later:
From the main menu, select Memo.
To delete the memo:
To store the memo number to Contacts:
1
2
3
4
From the main menu, select Memo.
Press m.
Select Store to Contacts.
To store the number as a new entry, select [New
Contact]. -orTo store the number to an existing entry, select
the entry.
5 With the Contacts type field highlighted, scroll
left or right to display the Contacts type you want
to assign the number.
6 Press A under Done.
1 From the main menu, select Memo.
2 Press and hold A under Delete.
3 Press O.
To edit the memo:
1 From the main menu, select Memo.
2 Enter the new number.
3 Press O.
To make a call to the memo number:
1 From the main menu, select Memo.
2 To make a phone call, press s. -orTo make a Private call, press the PTT button.
53
Ring Tones
Setting Your Phone to Vibrate
To set the ring tone your phone makes when you
receive phone calls, call alerts, message
notifications, pictures sent using Send via PTT, or
Datebook reminders:
You can set your phone to vibrate instead of
making a sound when you receive all phone calls,
Private calls, group calls, SDG calls, call alerts,
message notifications, pictures sent using Send via
PTT, and Datebook reminders.
1 From the main menu, select Ring Tones.
2 Make sure VibeAll is set to Off.
3 Scroll through the list of ring tones and select the
one you want to assign. Vibrate sets your phone
to vibrate instead of making a sound; Silent sets
your phone to neither vibrate nor make a sound.
Tip: Highlighting a ring tone lets you hear it.
4 Select the features you want to assign the ring
tone to.
5 When you are finished, press A under Done.
Note: This icon M appears on the display if you
set your phone to neither vibrate nor make
a sound for phone calls.
54
1 From the main menu, select Ring Tones >
VibeAll.
2 Set this option to On.
Tip: Pressing the volume controls to turn down
the volume as far as possible sets VibeAll
to On.
To set your phone to vibrate instead of making a
sound for some features but not others:
1
2
3
4
From the main menu, select Ring Tones.
Make sure VibeAll is set to Off.
Select Vibrate from the list of ring tones.
Select the features you want to set to make no
sound.
5 When you are finished, press A under Done.
Note: To set ring options for Private calls, group
calls, and SDG calls, see “Setting Your
Phone to Vibrate” on page 117.
Ring and Vibrate
These icons indicate how the ringer is set.
Q The phone always vibrates instead of making
a sound.
R The phone vibrates instead of making a
sound for phone calls.
u Group calls, SDG calls, and Private calls are
heard through the earpiece, not the speaker.
These icons may appear at the same time.
Ring and Vibrate
To set your phone to ring and vibrate when you
receive phone calls or call alerts:
1 From the main menu, select Ring Tones.
2 Make sure VibeAll is set to Off.
3 Scroll through the list of ring tones and highlight
the one you want to assign.
4 Press m.
5 Select Assign w/Vibe.
6 Select the features you want to set to ring and
vibrate.
7 When you are finished, press A under Done.
This icon S appears on the display.
Assigning Ring Tones to
Contacts
You can set the ring tone your phone makes when
you receive phone calls or call alerts from
someone you have stored in Contacts.
1 From the main menu, select Ring Tones.
2 Make sure VibeAll is set to Off.
3 Scroll through the list of ring tones and select the
one you want to assign.
4 Select A Contact.
5 Select the Contacts entry you want to assign the
ring tone to.
Note: You can assign some ring tones to
Contacts from the media center as well.
See “Assigning to Contacts” on page 71.
Viewing Ring Tone
Assignments
1
2
3
4
5
From the main menu, select Ring Tones.
Make sure VibeAll is set to Off.
Highlight any ring tone.
Press m.
Select Overview.
55
Ring Tones
6 Scroll to view ring tones assigned to features
and Contact entries.
4 Press m.
5 Select Memory Usage.
Downloading More Ring
Tones
Deleting custom ring tones frees memory.
If you want to use other ring tones, you can
download them into your phone for a fee. For more
information about custom ring tones and
downloading instructions, please contact your
service provider.
Note: Ring tones are stored in your phone using
the same memory space used to store
messages, Java application data, items
accessible through the media center, and
voice records created when your phone is
in a call. Deleting some of these other
items frees memory for ring tones.
About DRM Ring Tones
Deleting Custom Ring Tones
Your phone supports gifting and Tell-A-Friend
services for DRM ring tones. However, these
services may not be offered by your service
provider. Please contact your service provider for
more information about these services.
Deleting a ring tone from the list of ring tones
deletes it from all parts of your phone, including the
media center and Contacts.
For more information about DRM items, see
“Digital Rights Management” on page 74.
Managing Memory
Except for DRM ring tones, if you delete a ring tone
that you purchased from your phone, you will have
to purchase it again. Under certain conditions,
some DRM vendors will not charge you if you
download an item multiple times within a given time
frame. Please contact the DRM vendor to learn
more about their download regulations.
To view the amount of memory available for
custom ring tones:
To delete a custom ring tone:
1 From the main menu, select Ring Tones.
2 Make sure VibeAll is set to Off.
3 Highlight any ring tone.
1 From the main menu, select Ring Tones.
2 Make sure VibeAll is set to Off.
3 Scroll to the ring tone you want to delete.
56
Deleting Custom Ring Tones
4 Press m.
5 Select Delete.
6 Press A under Yes to confirm.
57
Entering Text
Using Word Mode
You can enter text, numbers, and symbols into
your phone using Alpha, Word, Numeric, or
Symbol text input modes.
In Word mode, T9 Text Input analyzes the letters
on the keypad button you press and arranges them
to create words. As you type, T9 Text Input
matches your keystrokes to words in its database
and displays the most commonly used matching
word. You can add you own words to this
database.
l Alpha — Press a key several times for each
character.
j Word — Press a key once for each letter
while words likely to be the one you want are
chosen from a database.
i Symbols — Enter punctuation and other
Entering a Word
1 Select Word as your text input mode.
2 Type a word by pressing one key for each letter.
k Numeric — Enter numbers.
For example, to type “test” press 8 3 7
8.
When you access a screen that requires you to
enter text, you start in the mode last used.
The displayed word may change as you type it.
Do not try to correct the word as you go. Type to
the end of the word before editing.
symbols.
To choose a text input mode:
1 At a screen that requires you to enter text, press
m.
2 Select the text input mode you want to use. A
checkmark appears next to the current mode.
58
3 If the word that appears is not the desired word,
press 0 to change the word on the display to
the next most likely word in the database.
Repeat until the desired word appears.
If the desired word does not appear, you can add it
to the database.
Special Function Keys
Adding Words to the Database
Capitalization
1
2
3
4
When you press and hold the # key, it acts as a
3-way toggle. Press and hold # to make the next
letter typed uppercase (shift), to make all
subsequent letters typed uppercase (caps lock), or
to go back to lowercase letters.
Select Alpha as your text input mode.
Type the word using Alpha mode.
Select Word as your text input mode.
Press #.
The word you typed in Alpha text entry mode is
now in the database.
Note: You cannot store alphanumeric
combinations, such as Y2K.
Choosing a Language
To change the language of the database:
1 At a screen that requires you to enter text, press
m.
2 Select Languages.
3 Select the language you want for your database.
Special Function Keys
Some of the phone’s keys assume different
functions while in Alpha or Word mode.
Spaces
Press # for a space.
These icons appear in the top row of your display:
m or X Shift is on.
n or W Caps lock is on.
When neither of these icons appear, letters typed
are lowercase. Scrolling up after typing a letter
makes that letter uppercase.
Note: Your phone automatically makes the first
letter of a sentence uppercase.
Punctuation
Press 1 or 0 to insert punctuation. Continue to
press the key to view the list of symbols available
through that key. Pause to select the symbol you
want.
Note: Additional punctuation symbols are
available in Symbols mode.
59
Messages
You can receive the following types of messages
on your phone:
• Voice mail messages
• Short Message Service (SMS) text messages
• Depending on your service provider, you may
have the option to receive fax mail and Net
alerts.
If you dismiss the notification, the message is not
deleted. It can be accessed through the message
center.
If you are not on a phone call when you receive a
message, your phone sounds a notification tone
every 30 seconds until you access the message,
you dismiss the notification, or the alert time-out
expires.
Setting Notification Options
You have 2 ways to access the messages you
receive:
To control whether your phone sounds message
notification tones while you are on phone calls:
• Respond to the message notification that
appears when the message is received.
• Dismiss the message notification and access
the message later through the message center.
1 From the main menu, select Settings > Phone
Calls > Notifications.
2 Select the option you want:
• Receive All — Tones sound during calls for
all types of messages.
• Msg Mail Only — Tones sound during calls
for SMS messages; tones for all other types
of messages are held until you end calls.
• Delay All — Tones for all types of messages
are held until you end calls.
Tip: To set notification options during a call:
Press m. Select In Call Setup >
Notifications.
You can listen to or view these messages, delete
them, or continue to store them in the message
center.
Message Notifications
When you receive a message, your phone notifies
you with text on the display and a notification tone
or vibration. You can access the message or
dismiss the notification.
60
Message Center
Message Center
The message center manages your messages.
All your messages are stored in the message
center. The message center shows how many
messages you have of each type.
To access your messages through the message
center:
1 From the main menu, select Messages.
2 Scroll to the type of message you want to
access.
3 Press O or press A under the display option
on the left.
61
Voice Mail Messages
Note: To receive voice mail messages, you must
first set up a voice mail account with your
service provider.
Receiving a Message
When you receive a voice mail message, New
VoiceMail Message appears on the display.
To call your service provider’s voice mail system
and listen to the message:
Press A under Call.
To dismiss the message notification:
Press O or press A under Back.
If the caller leaves a message, this icon y
appears on the display, reminding you that you
have a new message.
Accessing Voice Mail From
the Message Center
From the main menu, select Messages > Voice
Mail.
62
Sending Unanswered Calls to
Voice Mail
To send a phone call to voice mail instead of
answering it:
Press e. -orPress A under No.
MOSMS Messages
Note: This feature may not be offered by your
service provider.
If your service provider offers MOSMS, your phone
sends SMS messages using MOSMS and receives
SMS messages from other phones that are using
MOSMS.
Setting Up
Before you begin using MOSMS, you may need to
set up your signature, service center number, and
expiration information:
1
2
3
4
5
When you are finished, press O.
7 Select Expire After.
This is the amount of time messages you send
are saved at the service center if they cannot be
delivered. After this period, they are discarded.
Scroll to select the number of days you want
your messages to be saved.
When you are finished, press O.
8 Select Auto Clean Up. Set this option to On if
you want your phone to delete sent messages.
If you set Auto Clean Up to On, select Clean
Up After to set the number of days after which
sent messages are deleted or the number of
messages to be kept.
From the main menu, select Messages.
Scroll to Text Inbox.
Press m.
Select Text Msg Setup.
Select Signature.
9 Press A under Done to save the information
you entered.
Enter your signature. It may be up to 11
characters long. When you are finished, press
O.
To view the message:
6 Select Srvc Cntr No.
Enter the phone number of your service center.
If you do not know this number, contact your
service provider.
Receiving a Message
Press A under Read.
To dismiss the message notification:
Press A under Exit.
63
MOSMS Messages
If your phone is powered off when you receive a
text message, your phone notifies you the next
time you power it on. If you are out of your
coverage area, your phone alerts you when you
return to your coverage area.
Tip: While reading a text and numeric message
that contains a phone number, you can
press s to call that number.
Reading from the Message
Center
1 From the main menu, select Messages > Text
Inbox.
2 Select the message you want to read. -orPress the number of the message you want to
read.
3 If the message fills more than one screen, scroll
to read it.
Tip: Scrolling through one message lets you
view the next message.
4 To save the message, press A under Ok. -orTo reply to the message, press A under
Reply. -orTo see all other choices, including forwarding
and deleting the message, calling the sender, or
64
storing the sender’s number in Contacts, press
m.
Creating and Sending
Messages
1 From the main menu, select Messages >
[Create Message]. -orSelect [Create Message] from Text Inbox, Text
Outbox, or Drafts. -orHighlight Quick Notes and press A under
Compose.
Tip: This option is available from many
context-sensitive menus in the message
center.
2 To address the message:
Use the keypad to enter the phone number of
the person you want to send the message to.
-orPress A under Browse. Select Contacts,
Recent Calls, or Memo. Select the number you
want to enter.
When you are finished, press O.
3 Enter the text of the message. -or-
Creating and Sending Messages
To use a quick note: Press A under Browse.
Scroll to the quick note you want. For more
information on quick notes, see “Using Quick
Notes”.
When you are finished, press O.
4 If you want to send the message, press O or
press A under Send. -orTo delete the message without sending it, press
A under Cancel. -orIf you want to request confirmation of delivery,
save the message as a draft, or set the sending
method, press m. Select the option you want.
Beginning Messages From the Recent
Calls List
1 From the recent calls list, scroll to the name you
want to send a message to.
2 If the entry has more than one phone number
stored, view the phone number you want to send
the message to.
3 Press m.
4 Select Compose SMS. The message is
automatically addressed to the phone number
you chose.
5 Follow step 3 through step 4 of “Creating and
Sending Messages” on page 64.
Beginning Messages From the Idle
Screen
1 Using the keypad, enter the number you want to
send a message to.
2 Press m.
3 Select Compose SMS. The message is
automatically addressed to the phone number
you chose.
4 Follow step 3 through step 4 of “Creating and
Sending Messages” on page 64.
Using Quick Notes
Quick notes are short, pre-written text messages
that you can create, edit, and send. You can store
up to 20 quick notes. A quick note may be up to 30
characters long.
To create a quick note:
1 From the main menu, select Messages > Quick
Notes > [New Note].
2 Press O or press A under Create. Enter text.
-orTo choose from pre-installed notes, select the
note you want.
Tip: For more options, including sending the
quick note, press m.
65
MOSMS Messages
Using Drafts
Deleting Sent Messages
When you save a message as a draft, it is saved in
the drafts folder.
To delete a sent message:
To edit a draft:
1 From the main menu, select Messages >
Drafts.
2 Select the draft you want to edit.
3 To edit the fields you want to change, follow
step 2 through step 4 in “Creating and Sending
Messages” on page 64.
Resending Messages
To resend a message:
1 From the main menu, select Messages > Text
Outbox.
2 Scroll to the message you want to resend. -orPress the number of the message you want to
resend.
3 Press s. -orPress m. Select Resend.
66
1 From the main menu, select Messages > Text
Outbox.
2 Scroll to the message you want to delete.
3 Press A under Delete.
4 Press A under Yes to confirm.
To delete all unlocked sent messages:
1 From the main menu, select Messages > Text
Outbox.
2 Press m.
3 Select Delete All.
4 Press A under Yes to confirm.
Locking and Unlocking Sent
Messages
When you lock a message, it cannot be deleted
until you unlock it.
Locking a Message
1 From the main menu, select Messages > Text
Outbox.
2 Scroll to the message you want to lock or
unlock.
3 Press m.
Sorting Messages
4 Select Lock.
Unlocking a Message
1 From the main menu, select Messages > Text
Outbox.
2 Scroll to the message you want to unlock.
3 Press A under Unlock.
Sorting Messages
You can sort messages in your inbox by sender,
time and date, and status. You can sort messages
in your outbox by recipient, time and date, and
status.
1 From the main menu, select Messages > Text
Inbox or Messages > Text Outbox.
2 Highlight any messages.
3 Press m.
4 Select Sort and Order.
5 Select Sort By to specify the sorting method.
6 Select Order By to specify the sorting order.
The text inbox holds 20 messages. If the text inbox
is full, you cannot receive messages until you
delete some.
The outbox and drafts folder share memory space.
Together they can hold 30 messages. If the outbox
and drafts folder memory is full, you cannot send
messages or save drafts until you delete some
items.
To view the amount of memory available in your
text inbox:
1 From the main menu, select Messages > Text
Inbox.
2 Press A under Memory.
To view the amount of memory available in your
outbox and drafts folder:
1 From the main menu, select Messages > Text
Outbox or Messages > Drafts.
2 Press A under Memory.
Managing Memory
Your text inbox, outbox, and drafts folder have a
set amount of memory available for storing
messages.
67
Media Center
Viewing the Media Center
The media center lets you access pictures and
audio recordings.
To access the media center:
All pictures saved in your phone can be accessed
through the media center.
Scroll to view the items in the media center.
The following audio recordings can be accessed
through the media center:
From the main menu, select Media Center.
Choosing Thumbnail View or List
View
• Voice records created when your phone was not
in a call
• Musical ring tones in the list of ring tones
• Audio recordings you downloaded to your phone
You can set the media center to show a thumbnail
of each picture as you view the list of items or show
the list of items without thumbnails.
Pictures in the media center can be sent in Private
calls using Send via PTT. See “Using Send via
PTT” on page 78.
1
2
3
4
You can transfer pictures from your phone to your
computer using a data cable and iDEN Media
Downloader software. You can download a copy of
the Media Downloader software from the Software
Downloads page in the Support section of
idenphones.motorola.com.
To change views:
Access the media center.
Press m.
Select Set View.
Select Plain List View or Thumbnail List View.
Filtering by Media Type
You can set the media center to show all items,
only pictures, only audio recordings, or only video*.
* While your phone does not record video, certain Java applications
cause video to be accessible in the media center. Contact your
service provider for more information about such Java
applications.
Setting Filtering
1 Access the media center.
68
Forward Locked Items
2 Press m.
3 Select Filter.
4 Select All, Pictures, Audio, or Video.
Tip: You can also scroll left or right, or press *
or #, to scroll through these options while
viewing the list of items.
Keeping the Last Filter Setting
You can set the media center to show all items
every time you access it or to keep the filtering
setting you had when you last viewed it.
1
2
3
4
Access the media center.
Press m.
Select Setup.
Select Remember Filter to keep the filtering
setting you had when you last viewed the media
center. -orSelect Off to show all items every time you
access the media center.
When you receive your phone, the media center is
set to show all items every time you access it.
Accessing Items Listed
To access a picture or audio recording, select it
from the list of items in the media center.
With an item selected, scroll up or down to access
the items that appeared before and after it in the
list.
Sorting by Time or Name
You can set the media center to sort items by the
time the item was created or by the name of the
item.
1
2
3
4
5
Access the media center.
Press m.
Select Setup.
Select Sort.
Select By Time or By Name.
When you receive your phone, the media center is
set to sort items by time.
Forward Locked Items
Some items saved to the media center from Private
calls or by downloading may be forward locked.
This means you cannot send them to anyone. You
cannot remove forward locking from an item.
Forward locked items cannot be sent in Private
calls and cannot be uploaded from your phone.
Forward locked items are usually copyright
protected.
69
Media Center
When you view items in the media center, one of
these icons appears next to each forward locked
item:
f Forward locked.
c Forward lock and locked.
When an item is locked, it cannot be deleted from
the media center. See “Locking Items” on page 72.
Locking an item has no effect on its forward
locking.
DRM Items
Except for Java applications, which download to
Java Apps, the default location for any DRM items
that you download is the media center. For more
information about DRM items, see “Digital Rights
Management” on page 74.
Depending on how a given third-party vendor has
set rights for an item, the item may include the
following status icons.
c
The item is a DRM item.
e The DRM item has expired.
70
All DRM items are forward locked. As with other
items in media center, you can lock DRM items.
See “Locking Items” on page 72.
Note: While your phone supports gifting and
Tell-A-Friend services for DRM items,
these services may not be offered by your
service provider. Please contact your
service provider for more information.
Pictures
The media center lets you view pictures, send
them in Private calls, assign them to Contacts
entries, or set them as your phone’s wallpaper.
Viewing
To view a picture, select it from the list of items in
the media center.
If your phone is set to show thumbnails, a
thumbnail of each picture appears next to the
picture in the list of items. If your phone is not set to
show thumbnails, this icon g appears next to the
picture.
To see a larger or smaller view of the picture you
are viewing:
1 Press m.
2 Select Zoom.
Audio Recordings
3 Select the zoom option you want.
If the picture does not fit in the display, scroll left
and right and up and down to view different parts of
the picture.
Assigning to Contacts
1 Scroll to or select the picture you want to assign
to a Contacts entry.
2 Press m.
3 Select Set As Caller ID.
4 To store the number as a new entry, select [New
Contact]. -orTo store the number to an existing entry, select
the entry.
Only entries that include phone numbers are
displayed. This icon g appears next to entries
that have pictures assigned.
5 If you selected an entry with a picture assigned,
press O or press A under Yes to overwrite the
assigned picture. -orPress A under No to return to the list of entries
without overwriting the assigned picture.
Setting as Wallpaper
1 Scroll to or select the picture you want to set as
wallpaper.
Note: Pictures sent to you using Send via PTT
cannot be set as wallpaper.
2 Press m.
3 Select Set As Wallpaper.
Note: If you later set your wallpaper to change
automatically, the picture is included. See
“Wallpaper” on page 118.
Audio Recordings
The media center lets you play audio recordings
and assign them to Contacts entries.
Playing
To play an audio recording, select it from the list of
items in the media center.
This icon a appears next to each audio recording
in the list of items.
Tip: When viewing the list of items in the media
center, you can scroll left or right, or press
* or #, to change the type of media that is
displayed in the list.
To stop the audio recording before it has finished
playing:
Press O. -or-
71
Media Center
Press A under Stop. -or-
Locking Items
Scroll left.
When you lock an item in the media center, it
cannot be deleted until you unlock it.
To restart the audio recording, scroll right.
When you play an audio recording, an animated
image appears on the display.
Assigning to Contacts
To assign an audio recording in the media center
as the ring tone for a Contacts entry:
1 Scroll to or select the audio recording you want
to assign.
2 Press m.
3 Select Assign As Ringer.
4 Select the Contacts entry you want to assign the
ring tone to.
Note: You cannot assign a voice record as the
ring tone for a Contacts entry.
Renaming Items
1
2
3
4
5
Access the media center.
Scroll to or select the item you want to rename.
Press A under Rename.
Delete the item’s name and enter a new name.
Press O.
72
1 Access the media center.
2 Scroll to or select the item you want to lock or
unlock.
3 Press m.
4 Select Lock to lock the item. -orSelect Unlock to unlock the item.
When you view items in the media center, one of
these icons appears next to each locked item:
R Locked.
c Forward lock and locked.
Deleting Items
Deleting items from the media center deletes them
from all parts of your phone, including the list of
ring tones, the list of voice records, and Contacts.
Under certain conditions, some DRM vendors will
not charge you if you download an item multiple
times within a given time frame. Please contact the
DRM vendor to learn more about their download
regulations.
Managing Memory
Deleting an Item
1
2
3
4
Scroll to or select the item you want to delete.
Press m.
Select Delete.
Press O or A under Yes to confirm.
Deleting All Items
To free memory, delete items in the media center.
Note: Items in the media center are stored in
your phone using the same memory
space used to store messages, Java
applications data, and voice records
created when your phone is in a call.
Deleting some of these other items frees
memory for media.
You can delete all unlocked items currently in view,
depending on how media center filtering is set. See
“Filtering by Media Type” on page 68. If filtering is
set to show all types of media center items, all
unlocked items are deleted.
1
2
3
4
Access the media center.
Press m.
Select Delete All.
Press O or A under Yes to confirm.
Managing Memory
To view your used memory, free memory, and
memory capacity:
1 Access the media center. -orScroll to or select any item in the media center.
2 Press m.
3 Select Memory Usage.
73
Digital Rights Management
Digital Rights
Management
When you download multimedia content available
online, such as audio, images, or Java
applications, these items may be subject to DRM
restrictions. DRM, or digital rights management, is
a system that defines how copyrighted multimedia
content can be distributed and used.
DRM sets items to time-based or count-based
usage settings. Time-based settings let you use
the given item for a specified interval. Examples of
time-based settings include permission to use an
item for a specified number of days from the date
of purchase, a specified number of days from the
date that the item is first used, or a specified
number of minutes. Count-based settings let you
use an item for a specified number of times after
you download it or for unlimited use.
Installing Items
Except for DRM Java applications, DRM items will
automatically install once they have finished
downloading.
To install DRM Java applications, see “Installing
Applications” on page 87.
74
To send the DRM installation to the background,
press e.
Understanding DRM Status
Icons
Depending on how a given third-party vendor has
set rights for an item, the item may include the
following status icons:
c
The item is a DRM item.
e
The DRM item has expired.
All DRM items are forward locked. As with other
items in media center, you can lock DRM items.
See “Locking Items” on page 72.
Sharing Items
Note: These features may not be offered by
your service provider.
You can gift a DRM item to a friend’s phone. Gifting
is when you purchase a copy of a DRM item and
send it to someone. If you do not want to gift an
item, you can send a message to a friend’s phone
Managing DRM Items
that contains the link for purchasing the item. The
friend can then purchase the item quickly and
easily. Sending this type of message is called
Tell-A-Friend.
Gifting
To check if a DRM item is giftable:
1 Go to the location on your phone that contains
the item you want.
2 Highlight the DRM item you want to gift.
3 Press m. If Gift is an option, the item is giftable.
To gift a DRM item:
1 Go to the location on your phone that contains
the item you want.
2 Highlight the DRM item you want to gift.
3 Press m.
4 Select Gift.
5 Select the contact you want to send the item to.
-orIf the person you want to send the item to is not
in Contacts, select [New Number]. Enter the
number.
6 Press O.
7 Follow the vendor’s instructions for purchasing
an additional license.
Tell-A-Friend
1 Go to the location on your phone that contains
the item you want.
2 Highlight the DRM item you want to tell your
friend about.
3 Press m.
4 Select Tell-A-Friend.
The Create Message screen opens.
5 Complete and send the message. See “Creating
and Sending Messages” on page 64.
Managing DRM Items
Note: Depending on how the third-party vendor
has set rights for the given DRM item, you
may be unable to perform some of the
following tasks.
Viewing License Information
You can check a DRM item’s license to view the
following information:
• For time-based items, either the date and time
the item is scheduled to expire, or the number of
days left
• For count-based items, the number of credits
(uses) left or an unlimited use notice
75
Digital Rights Management
• The name of the item’s vendor
Deleting Items
To view the license of a DRM item:
If you delete a DRM item that you purchased from
your service provider from your phone, you will
have to purchase it again to download it.
1 Go to the location on your phone that contains
the item you want.
2 Highlight the DRM item you want to view license
information for.
3 Press m.
4 Select License Info.
Renewing DRM Licenses
Note: You can only renew DRM licenses if the
license contains a link to the page where
you purchased the item.
1 Go to the location on your phone that contains
the item you want.
2 Highlight the DRM item you want to renew.
3 Press A under Renew or press m. Select
Renew.
4 Select the link to the page where you purchased
the item.
5 Follow the vendor’s instructions for purchasing
an additional license.
76
Under certain conditions, third-party vendors will let
you download an item multiple times within a given
time frame, even if you deleted the item. Please
contact the third-party vendor of an item to learn
more about the vendor’s download regulations.
To delete an item:
1 Go to the location on your phone that contains
the item you want to delete.
2 Highlight the DRM item you want to delete.
3 Press m.
4 Select Delete.
5 If prompted, press A under Yes.
About Expired Items
If you are using an item when it expires, once you
finish your session with the item, you will be unable
to use the item.
Managing DRM Items
When ring tones and wallpapers expire, they are
automatically removed from their respective lists.
For expired items that continue to display in their
respective lists, you can either choose to renew the
license for the item or else manually delete the
item.
Note: You cannot delete locked items.
77
Using Send via PTT
Send via PTT lets you exchange pictures, My Info
and contact information with other phones that
have this capability. You can also receive pictures.
You do this through Private calls.
Send via PTT cannot be used during group calls.
Sending a Picture
Note: This feature may not be offered by your
service provider.
When you send a picture using Send via PTT, the
picture you sent appears on the display of the
phone you are engaged in the Private call with and
is saved to that phone’s media center.
Sending a Picture During a Call
You can send a picture at any time during a Private
call, whether you made or received the call*.
* Additional charges may apply.
You cannot talk or listen on a Private call while a
picture is being transmitted. Other activities, such
as searching for a picture, do not prevent you from
talking or listening.
78
Sending a Stored Picture
1 While in a Private call: Press m. Select Browse
Pictures.
A list of pictures that can be included in a Private
call appears.
2 Select the picture you want to send.
3 Press the PTT button to send the picture.
4 Wait while the picture is transmitted. The Private
call is temporarily interrupted while a picture is
transmitted.
5 When prompted, press the PTT button to
resume the Private call.
Starting a Call by Sending a Picture
You can start a Private call after you choose a
stored picture from the media center.
To do this, you must have the Private ID and IP
address of the person you want to send to stored in
your Contacts.
1 From the media center, scroll to or select the
picture you want to send in a Private call.
2 Press m. Select Transfer.
3 Select Send via PTT.
Receiving a Picture
A list of names from Contacts appears. These
names have Private IDs and IP addresses
stored.
2 Wait while the picture is transmitted. The Private
call is temporarily interrupted while the picture is
transmitted.
3 When prompted, press the PTT button to
resume the Private call.
Tip: If you want to stop the transmission before it
is finished, press A under Cancel.
4 Select the name of the person you want to send
the picture to.
5 Press the PTT button to send the picture.
6 Wait while the picture is transmitted. The Private
call is temporarily interrupted while a picture is
transmitted.
Declining a Picture
When prompted, press the PTT button to resume
the Private call.
When you see the message asking you if you want
to accept the picture, press A under No.
Receiving a Picture
When someone sends you a picture using Send
via PTT, your phone emits tone or vibrates and a
message appears on the display asking you if you
want to accept the picture.
When you receive a picture, it appears every time
you are in a Private call with the person who sent it
unless you delete the picture from the media
center. This occurs for the last 20 people who sent
you pictures.
The picture is not transmitted.
Setting Picture Capability
To turn your phone’s ability to send and receive
pictures in Private calls on or off:
1 From the main menu, select Settings > 2-Way
Radio > PTT Picture.
2 Select On or Off.
This setting does not affect your phone’s ability to
send and receive My Info or contact information.
Accepting a Picture
1 When you see the message asking you if you
want to accept the picture, press A under Yes.
79
Using Send via PTT
Sending My Info and Contact
Information
When you send My Info or contact information
using Send via PTT, the information you sent
appears on the display of the phone you are
engaged in the Private call with. After the call, the
information appears in the recent calls list of that
phone.
Sending My Info
You can control what portion of the information in
My Info is sent and whether it is sent automatically
in every Private call or only when you choose to
send it. See “Setting Sending Options” on page 83.
Tip: When you send My Info, certain
information, such as your email address or
fax number, cannot be included. To send
complete contact information, create an
entry for yourself in Contacts and send it.
Starting a Call by Sending Information
1
2
3
4
From the main menu, select My Info.
Press m.
Select Send My Info via PTT.
Use the keypad to enter the Private ID you want
to send the information to. -orPress A under Browse. Select Contacts,
Recent Calls, or Memo. Select the number you
want to enter.
5 When Ready to Send appears on the display,
press the PTT button to send the information.
Sending Contact Information
You can send contact information by selecting a
Contacts entry or an item from the recent calls list.
Contacts entries that contain only addresses
cannot be sent. When Contacts entries are
received, they do not include ring tones or pictures.
Sending Information During a Call
These items from the recent calls list can be sent:
1 While in a Private call, press m.
2 Select Send My Info via PTT.
3 When Ready to Send appears on the display,
press the PTT button to send the information.
• Contact information sent from other phones
• Calls to or from numbers stored in your Contacts
list
Sending Information During a Call
1 While in a Private call, press m.
80
Sending My Info and Contact Information
2 Select Contacts or Recent Calls.
3 Scroll to the Contacts entry or item in the recent
calls list you want to send.
4 Press m.
5 From the Contacts list, select Transfer > Send
via PTT. -orFrom the recent calls list, select Send Contact
via PTT.
6 When Ready to Send appears on the display,
press the PTT button to send the information.
Starting a Call by Sending Information
1 From the Contacts list or the recent calls list,
scroll to or select the entry you want to send.
2 Press m.
3 From the Contacts list, select Transfer > Send
via PTT. -or-
Receiving My Info or Contact
Information
When you receive My Info or contact information
from another phone, an icon appears on the
display:
j My Info.
d Contact information.
To view the information while still in the Private
call:
1 Press m.
2 Select View Contact.
You can also view My Info from other phones on
the recent calls list. See “Recent Calls” on page 23.
From the recent calls list, select Send Contact
via PTT.
4 Use the keypad to enter the Private ID you want
to send. -orPress A under Browse. Select Contacts,
Recent Calls, or Memo. Select the number you
want to enter.
5 When Ready to Send appears on the display,
press the PTT button to send the information.
81
My Info
My Info lets you view information about your phone
and send this information to other phones.
Viewing My Info
1 From the main menu, select My Info.
2 Scroll to see the entire screen.
The My Info screen contains:
• My Name — You can enter your name here.
• Line 1 and Line 2 — your phone numbers for
phone lines 1 and 2. Each number appears
when you receive your first call on that line.
• Private — Your Private ID is the number that
others use to contact you using Private calls.
This number appears when you receive your
first Private call.
• Group ID — the number of the Talkgroup you
have joined.
• Carrier IP — the IP address assigned to your
service provider. This number appears when
you register for packet data services.
• IP1 Address and IP2 Address — the IP
addresses you use to access the Internet with
your phone.
82
• Circuit Data — the number you use if you want
to use your phone to transfer circuit data. See
“Using Your Phone as a Modem” on page 42.
You receive this number from your service
provider.
Note: If you request equipment-related
transactions on your account, your service
provider may require you to provide
specific information about your phone. By
pressing m anytime while in My Info, a
submenu will appear that includes your
phone's service status, unit information,
and phone identification numbers
including IMEI, SIM ID, and Serial
Number (SN). Please be prepared to
supply the representative with this
information when requesting these types
of transactions.
Editing My Info
To edit My Info to enter or change the text that
appears in My Name:
1
2
3
4
From the main menu, select My Info.
Press A under Edit.
Select Name.
Enter the name you want to appear. When you
are finished, press O.
Setting Sending Options
You can also edit the information in Line 1, Line 2,
and Circuit Data, but your changes are only
temporary. The next time your phone registers on
the network, your actual phone numbers and circuit
data number appear again in My Info.
Setting Sending Options
Your phone can send information in My Info to
other phones that have this capability.
You can control what portion of the information in
My Info is sent and whether it is sent automatically
in every Private call or only when you choose to
send it.
Information Sent
The information your phone sends always includes
My Name and Private.
4 A checkmark appears next to the fields that will
be sent. To add or remove the checkmark, select
the field.
5 When you are finished, press A under Done.
Automatic Sending
To control whether your information is sent
automatically:
1
2
3
4
From the main menu, select My Info.
Press m.
Select Send My Info Setup > Auto Send.
To set your information to be sent automatically,
set this option to On. -orTo set your information to be sent only when you
choose to send it, set this option to Off.
It may include Line 1, Line 2, Carrier IP, and
Circuit Data, depending on the options provided
by your service provider and how you set your
sending options.
To change which fields are sent:
1 From the main menu, select My Info.
2 Press m.
3 Select Send My Info Setup > Info to Send.
83
Voice Records
A voice record is a recording you make with your
phone and can play back. You can record notes to
yourself when your phone is not in a call or record
phone calls when your phone is in a call.
Voice records created when your phone is not in a
call can be accessed through the media center.
Viewing Voice Records
To view your list of voice records:
1 From the main menu, select VoiceRecord.
2 Scroll to view more voice records.
Voice Record Icons
One of these icons appears next to each voice
record:
Filtering by Voice Record Type
You can set your phone to show all voice records,
only voice records created when your phone was in
a call, or only voice records created when your
phone was not in a call.
1
2
3
4
From the main menu, select VoiceRecord.
Press m.
Select Filter.
Select the option you want:
• All — show all voice records.
• In Call — show only voice records created
when your phone was in a call.
• Standard — show only voice records created
when your phone was not in a call.
Tip: You can also press * or # to scroll
through these options while viewing the list
of voice records.
c A voice record made while your phone was
Creating Voice Records
v A voice record made while your phone was in
Phone Not in a Call
not in a call.
a call.
To record a note to yourself:
1 From the main menu, select VoiceRecord >
[New VoiceRec].
84
Playing Voice Records
2 Say the message you want to record into the
microphone.
Tip: To stop recording and discard the voice
record at any time, press A under
Cancel.
Labeling Voice Records
3 When you are finished recording, press O.
1
2
3
4
5
Phone in a Call
To record a phone call:
1 While on an active call, press m.
2 Select Record.
3 When you are finished recording, press O.
Note: Recording of phone calls is subject to
applicable laws regarding privacy and
recording of phone conversations.
Playing Voice Records
1 From the main menu, select VoiceRecord.
2 Select the voice record you want to play.
3 To stop the voice record while it is playing, press
O.
Tip: To pause or resume, press any number key.
When you create a voice record, it is labeled with
the time and date it was recorded. You can then
rename it with a custom label.
From the main menu, select VoiceRecord.
Scroll to the voice record you want to label.
Press A under Label.
Enter the label you want to assign.
Press O.
Locking Voice Records
When you lock a voice record, it cannot be deleted
until you unlock it.
1 From the main menu, select VoiceRecord.
2 Scroll to the voice record you want to lock or
unlock.
3 Press m.
4 Select Lock to lock the message. -orSelect Unlock to unlock the message.
When a voice record is locked, this icon R appears
next to it.
85
Voice Records
Deleting Voice Records
Deleting a voice record from the voice record list
deletes it from all parts of your phone, including the
media center.
Deleting a Voice Record
1 From the main menu, select VoiceRecord.
2 Scroll to the unlocked voice record you want to
delete.
3 Press m.
4 Select Delete.
5 Press O or A under Yes to confirm.
Deleting All Voice Records
1
2
3
4
5
From the main menu, select VoiceRecord.
Scroll to any voice record.
Press m.
Select Delete All.
Press O or A under Yes to confirm.
Managing Memory
To view the amount of memory available for voice
records:
1 From the main menu, select VoiceRecord.
86
2 With [New VoiceRec] highlighted, press A
under Memory. -orWith any voice record highlighted, press m.
Select Memory.
To free more memory by deleting all unlocked
voice records:
1 From the voice records memory screen, press
A under Delete.
2 Press O or A under Yes to confirm.
Note: Voice records are stored in your phone
using the same memory space used to
store messages, Java application data,
pictures, ring tones, and wallpaper
images. Deleting some of these other
items frees memory for voice records.
Java Applications
2 If you have selected a suite of applications,
select the application you want to run.
Your phone arrives with Java applications loaded
and ready to install. You can download and install
more Java applications.
To run an application that does not have a shortcut
on the main menu:
Note: Using Java applications may cause your
phone to use up more battery power than
other uses of your phone.
Installing Applications
1 From the main menu, select Java Apps.
2 Select the application or suite of applications
you want to install.
Installation messages appear as the application
installs.
3 If you want to create a shortcut to the Java
application on the main menu: Press A under
Next. Press A under Yes. Press O.
4 Press A under Done.
Running Applications
To run an application that has a shortcut on the
main menu:
1 From the main menu, select the application or
suite of applications you want to run.
1 From the main menu, select Java Apps.
2 Select the application or suite of applications
you want to run.
3 If you have selected a suite of applications,
select the application you want to run.
Tip: If you do not hear the sounds associated
with the Java application, select Settings >
Volume and check the volumes of Java
Speaker and Java Earpiece.
Suspending Applications
When you suspend an application, it does not stop
running. It goes to the background so that you can
run another application in the foreground.
To suspend an application:
Press e.
To view your suspended applications:
From the Java menu, select Suspended Apps.
You can have up to 3 applications running at one
time — 1 running in the foreground and 2 in the
background.
87
Java Applications
Resuming Applications
You can resume a suspended application at any
time. This brings it to the foreground.
6 If you want to end all applications without letting
them exit, press A under EndNow.
Downloading Applications
1 From the Java menu, select Suspended Apps.
2 Select the application you want to resume.
If you want to run more Java applications, you can
download them into your phone.
Ending Applications
For a selection of Java applications and
downloading instructions, please contact your
service provider.
To end an application:
1 From the main menu, select Java Apps.
2 If the application you want to end is part of a
suite of applications, select the suite.
3 Scroll to the application you want to end.
Press A under End. -orIf End is not one of your options: Press m.
Select End.
Tip: You can also end applications from the
Suspended Apps screen.
To end all applications:
1
2
3
4
5
From the main menu, select Java Apps.
Scroll to Suspended Apps.
Press m.
Select End All.
Press O or press A under Yes to confirm.
88
About DRM Java Applications
Your phone supports gifting and Tell-A-Friend
services for DRM Java applications. However,
these services may not be offered by your service
provider. Please contact your service provider for
more information about these services.
For more information about DRM items, see
“Digital Rights Management” on page 74.
Deleting Applications
Note: Under certain conditions, some DRM
vendors will not charge you if you
download an item multiple times within a
given time frame. Please contact the DRM
vendor to learn more about their
download regulations.
Managing Memory
To delete an application:
1
2
3
4
5
6
From the main menu, select Java Apps.
Scroll to the application you want to delete.
Press m.
Select Deinstall.
Press O or press A under Yes to confirm.
When your phone has finished deleting the
application, press A under Done.
To delete all Java applications:
1
2
3
4
5
From the main menu, select Java Apps.
Scroll to Java System.
Press m.
Select Delete All.
Press O or press A under Yes to confirm.
Managing Memory
To view the amount of memory available for Java
applications:
1 From the main menu, select Java Apps > Java
System.
2 Press A under Next.
3 To see more memory information, press A
under Next again.
Note: Java applications are stored in your
phone using the same memory space
used to store messages, voice records,
pictures, ring tones, and wallpaper
images. Deleting some of these other
items frees memory for voice records.
Shortcuts on the Main Menu
When you install an application, you can create a
shortcut to the application on the main menu.
To create a shortcut to an application that is
already installed:
1 From the main menu, select Settings >
Personalize > Menu Options > Add/Remove
Apps. -orFrom the main menu: Press m. Select Main
Menu Setup > Add/Remove Apps.
2 Scroll to view the list of Java applications. Any
application that has a shortcut on the main menu
has a checkmark next to it.
3 Scroll to the application you want to create a
shortcut for.
4 Press O.
5 Press A under Done.
Deleting Java applications frees memory.
89
Java Applications
To remove a shortcut:
1 From the main menu, select Settings >
Personalize > Menu Options > Add/Remove
Apps. -orFrom the main menu: Press m. Select Main
Menu Setup > Add/Remove Apps.
2 Scroll to view the list of Java applications. Any
application that has a shortcut on the main menu
has a checkmark next to it.
3 Scroll to the application you want to remove the
shortcut for.
4 Press O.
5 Press A under Done.
Java Applications and GPS
Enabled
Some Java applications can make use of your
phone’s GPS feature to determine the approximate
geographical location of your phone. (See “GPS
Enabled” on page 101 for more information on the
GPS feature.) However, for privacy reasons, you
may not always want Java applications to access
the location of your phone. Your phone protects
your privacy by giving you the option to block all or
some Java applications from accessing the
location of your phone.
90
Setting Privacy for All Java
Applications
These options control the privacy of all Java
applications on your phone:
• Restricted — No Java or similar software
applications may access the location of your
phone. However, location information may still
be available to the phone’s owner, fleet
manager, or account administrator.
• Unrestricted — All Java applications may
access the location of your phone, without
notifying you.
• By Permission — When a Java application
attempts to access the location of your phone,
you are prompted to give permission. However,
location information may still be available to the
phone’s owner, fleet manager, or account
administrator.
See “Setting Privacy Options” on page 107 for
information on choosing these options.
Java Applications and GPS Enabled
Granting or Denying Permission
To grant this request:
If you choose By Permission, you must grant or
deny each Java application access to the location
of your phone when the application requests
access for the first time. You may be required to
grant or deny subsequent requests from the same
application, depending on the privacy setting you
choose for the individual Java application (see
“Setting Privacy for Each Java Application”).
1 Press A under Grant. The application
accesses your phone’s location.
2 Select the granting option you want:
• Always — If the application requests access
to the location of your phone again, the
request is granted without notifying you.
• For this session — If the application
requests access to the location of your phone
again before you power off your phone, the
request is granted without notifying you.
• Only Once — If the application requests
access to the location of your phone again,
you are prompted to grant or deny
permission.
When a Java application requests access to the
location of your phone, a screen appears informing
you.
To deny this request:
1 Press A under Deny. The application does not
access the location of your phone.
2 Select the denying option you want:
• Always — If the application requests access
to the location of your phone again, the
request is denied without notifying you.
• For this session — If the application
requests access to the location of your phone
again before you power off your phone, the
request is denied without notifying you.
• Only Once — If the application requests
access to the location of your phone again,
you are prompted to grant or deny
permission.
Setting Privacy for Each Java
Application
After a given Java application requests access to
the location of your phone for the first time, you
have the opportunity to set the GPS privacy option
for that Java application.
1 From the main menu, select Java Apps.
2 Scroll to the application or suite of applications
you want to set the privacy option for.
91
Java Applications
If the application has requested access to the
location of your phone, this icon S appears
when you highlight the application.
3 Press m.
4 Select Permissions.
5 Select the privacy option you want for this
application:
• Always — The application always has
permission to access the location of your
phone, without notifying you.
• Ask — When the application requests access
to the location of your phone, you are
prompted to grant or deny permission (see
“Granting or Denying Permission” on page
91).
• Never — When the application requests
access to the location of your phone, the
request is denied without notifying you.
92
Understanding Bluetooth® Access Settings
Bluetooth®
Your i605 phone is a Bluetooth device. Bluetooth
devices create seamless voice and data
connections with other Bluetooth devices, such as
another Bluetooth phone, a Bluetooth pen,
headset, or desktop adapter. These connections
are made wirelessly.
You can use your i605 phone to send information
such as Contacts entries, Datebook events, and
pictures to another Bluetooth device.
Devices must be within 32 feet (10 meters) of your
phone to be recognized.
Note: This measurement represents optimal
conditions. Actual conditions may require
you to position your phone closer.
You can only connect your phone to one device at
a time.
Understanding Bluetooth®
Access Settings
A Bluetooth device can have either automatic or
ask security access. The first time a Bluetooth
device connects to your i605 phone, you must
grant the device permission to connect. You can
then change the access setting of the device to
either automatic or ask.
If you set a device to automatic, then that device
can connect automatically to your phone when it is
in range. If you set a device to ask, then that device
must request permission before it can connect to
your phone.
Devices are automatically granted permission
during the 10 seconds after bonding. For more
information about bonding, see “Bluetooth®
Bonds” on page 95.
The default for hands free devices, such as
Bluetooth headsets, is automatic.
Setting Your Phone for
Bluetooth®
You can configure the following aspects of
Bluetooth:
• Power
93
Bluetooth®
• Device name
• Voice recognition and dialing
3 Press O.
Turning Bluetooth® On or Off
Some Bluetooth devices use voice dialing. When
you receive your phone, Bluetooth voice dialing is
turned off.
You can turn power to your phone’s Bluetooth
feature on or off. While Bluetooth power is on, your
phone can communicate with other devices.
You can turn off Bluetooth if you want to prolong
battery life or you enter an area where Bluetooth is
prohibited.
The default setting is Off.
1 From the main menu, select Bluetooth > Setup
> Power.
2 Select the setting you want.
Renaming Your Phone
Bluetooth devices are listed by their Bluetooth
addresses unless you name them. Your i605
phone comes with a default device name of
“Motorola Phone”. Renaming your i605 phone with
a unique device name makes it easier for you to
distinguish your phone from other Bluetooth
devices.
1 From the main menu, select Bluetooth > Setup
> Name.
2 Enter the name you want for your phone.
94
Setting Voice Dialing
To activate voice dialing for Bluetooth:
1 From the main menu, select Bluetooth > Setup
> Voice Dial.
2 Select the setting you want.
Accessing Bluetooth®
From the main menu, select Bluetooth. -orWhile in a call, press m. Select Use Bluetooth.
Note: If Bluetooth power is set to Off on your
phone, you will be prompted to
temporarily turn power on in order to use
Bluetooth.
Making a Bluetooth® Connection
Making a Bluetooth®
Connection
Note: You must grant the device’s request in
order to receive information from the
device on your phone.
The following sections cover how to connect your
phone to another Bluetooth device.
To start discoverable mode, from the main
menu, select Bluetooth > Find Me.
Note: Some Bluetooth devices only have full
functionality when DTMF dialing is set to
On. See “Phone Calls Features” on
page 121.
Sharing Your Phone’s Bluetooth
Address
®
To bond with your phone, devices must have your
phone’s Bluetooth address. To find devices that
you want to bond with, you can make your phone
discoverable, so that other devices learn your
phone’s Bluetooth address. You can also have
your phone search for Bluetooth devices to learn
their addresses.
Allowing Bluetooth® Devices to Find Your
Phone
To let devices find your phone and its Bluetooth
address, place your phone in discoverable mode.
Discoverable mode lasts for 60 seconds. During
this time, other devices that are within range can
detect your phone. You can then choose to grant
or deny each device’s request to bond.
Discovering Bluetooth® Devices
To have your phone search for Bluetooth devices:
From the main menu, select Bluetooth > Hands
Free > [Find Devices].
A list of hands free devices displays. Devices
that do not have a name are listed by their
Bluetooth address.
To stop the search and go to the list of found
devices, press A under Stop.
To stop the search and return to the previous
screen, press A under Cancel.
Bluetooth® Bonds
A bond is an encryption key that is generated when
two Bluetooth devices exchange a common PIN.
This key verifies the identity of each device, and
encrypts any data transferred between the devices.
Once the PIN is exchanged, the devices do not
have to be in discoverable mode in order to
exchange information. You only need to create a
bond once between two devices.
95
Bluetooth®
If you search for devices and you select a device
that you are currently bonded with from the list of
found devices, then the current bond with that
device will be voided. You will have to re-establish
the bond.
Your i605 requires that you create a bond in order
to connect with another device. However, you can
choose to establish bonds with devices without
connecting.
Note: Devices are automatically granted
permission during the 10 seconds after
bonding.
Bluetooth® PINs
Bluetooth devices exchange PINs in order to
establish encrypted transfers between them. When
prompted, enter the Bluetooth PINs.
Some Bluetooth devices ship with Bluetooth PINs.
Please refer to your Bluetooth device’s user guide
to locate this information.
If a device ships without a Bluetooth PIN, then you
can enter any PIN for that device. To establish a
connection to that device, enter the same PIN for
both your phone and the device. For example, if
you enter 1234 as the device’s PIN, then enter
1234 as your phone’s PIN.
96
To create a bond between your phone and another
device:
1 From the main menu, select Bluetooth.
2 If you want to create a bond and connect with
the given device, select Hands Free > [Find
Devices]. -orIf you want to create a bond to have it available
for future use, select Link to Devices.
3
4
5
6
Select the device you want.
Enter a PIN.
Press A under Done.
If necessary, enter the same PIN for the other
device.
7 Select Bond.
Connecting to a Stored Device
If you have previously connected to a device, the
device will be stored on your phone so you can
connect with it easily.
1 From the main menu, select Bluetooth > Hands
Free.
2 Select the device you want to connect to.
3 If prompted whether you want to bond with the
device, press A under Yes.
Setting Device Details
4 If prompted, enter the Bluetooth PIN.
Your phone will connect to the device.
Using Bluetooth® During a Call
During a call, you can connect with available
Bluetooth devices.
Note: If the Hands Free menu contains only one
device, then your phone will automatically
try to connect to that device.
1 While in a call, press m. Select Use Bluetooth.
2 Select the device you want to connect to.
Disconnecting from a Device
To disconnect from a device:
1 From the main menu, select Bluetooth >
Hands Free.
2 Press O.
3 Press A under Drop.
Note: Pressing A under No when prompted
exits the menu without disconnecting the
device.
Setting Device Details
The device history stores a list of up to 20 devices
that have connected with your phone.
To view the device history, from the main menu,
select Bluetooth > Device History.
From the device history, you can:
• Edit device names
• Change device access settings
• Delete devices
Note: If you delete a device from device history,
you will have to find the device to connect
with it. See “Discovering Bluetooth®
Devices” on page 95.
Viewing Device Details
To view the name and the access setting of a
device:
1 From the main menu, select Bluetooth >
Device History.
2 Select the device you want.
4 Press A under Yes.
97
Bluetooth®
Editing Device Names
You can edit a device name so the device is easier
to identify.
1 From the main menu, select Bluetooth >
Device History.
2 Scroll to the device you want to rename.
3 Press A under Edit or press O.
4 Select Name.
5 Enter the new name.
Note: A device name can have a maximum of
40 characters.
6 Press O.
3 Press m.
4 Select Delete.
5 To delete the device, press O.
Sending Contacts, Datebook
Events and Pictures
Bluetooth lets you send Contact entries, Datebook
events, or pictures you have stored in the media
center to connected devices.
Sending Contacts
1 From the main menu, select Contacts. -orFrom the idle screen, press A under
Contacts.
Editing Device Access Settings
1 From the main menu, select Bluetooth >
Device History.
2 Scroll to the device you want to set access for.
3 Press A under Edit or press O.
4 Select Access.
5 Select the setting you want.
Deleting Devices
1 From the main menu, select Bluetooth >
Device History.
2 Scroll to the device you want to delete.
98
2
3
4
5
6
Highlight the contact you want to send.
Press m.
Select Transfer.
Select Bluetooth.
Select the device you want to transfer to. -orSearch for the device you want to transfer to by
selecting [Find Devices].
7 If prompted, bond with the device.
Your phone connects to the device and transfers
the contact.
Receiving Items
Sending Datebook Events
1
2
3
4
5
From the main menu, select Datebook.
Highlight the event you want to send.
Press m.
Select Transfer.
If the event you select repeats, then you will be
prompted to choose whether to send the
selected instance of the event or all instances of
the event.
To send only the selected instance of the event,
select This Event Only. -orTo send all instances of the event, select
Repeat Events.
6 Select Bluetooth.
7 Select the device you want to transfer to. -orSearch for the device you want to transfer to by
selecting [Find Devices].
8 If prompted, bond with the device.
Your phone connects to the device and transfers
the event.
Sending Pictures
Note: You can only send pictures if they are not
forward locked.
1
2
3
4
5
6
From the main menu, select Media Center.
Highlight the picture you want to send.
Press m.
Select Transfer.
Select Bluetooth.
Select the device you want to transfer to. -orSearch for the device you want to transfer to by
selecting [Find Devices].
7 If prompted, bond with the device.
Your phone connects to the device and transfers
the picture.
Receiving Items
You receive a prompt when your phone has an
incoming transfer. You must either accept or reject
the transfer.
Canceling Transfers
You can cancel a transfer while the transfer is in
progress.
1 Press A under Cancel.
99
Bluetooth®
2 Press A under Yes to cancel. -orPress A under No to continue with the
transfer.
Note: If a transfer is interrupted, the
Connection Failed prompt displays.
Viewing and Storing Received Items
After an incoming transfer is complete, your phone
translates the item. The item appears on your
phone’s display. You can choose to either store or
discard the item. Items are stored as follows:
• Contact entries to Contacts
• Pictures to the media center
• Datebook events to Datebook
To store the item, press A under Store or
press O. -orTo discard an item without saving it, press A
under Discard.
100
GPS Enabled
Your phone’s GPS Enabled feature uses
information from Global Positioning System (GPS)
satellites orbiting the Earth to determine the
approximate geographical location of your phone,
expressed as latitude and longitude. The
availability and accuracy of this location
information (and the amount of time that it takes to
calculate it) will vary depending on the environment
in which you are using the GPS feature. For
example, GPS location fixes are often difficult to
obtain indoors, in covered locations, between high
buildings, or in other situations where you have not
established a clear broad view of the sky. SEE:
“IMPORTANT: Things to Keep in Mind”.
When you make a 911 emergency call, the GPS
feature of your phone can help emergency
personnel locate you if your phone has adequate
access to GPS satellite signals and your
emergency response center is equipped to process
such information.
You can also use the GPS feature to view your
approximate location. Location information
appears on the phone’s display.
Java applications loaded on your phone can also
request your location. If your phone is connected to
a laptop computer or similar device, software
running on that device can request your location.
To protect your privacy, you can control whether
these requests are granted.
IMPORTANT: Things to Keep
in Mind
If you are using the GPS feature of your phone
while driving, please give full attention to driving
and to the road.
Where adequate signals from multiple satellites
are not available (usually because your GPS
antenna cannot establish a view of a wide area of
open sky), the GPS feature of your phone WILL
NOT WORK. Such situations include but are
not limited to:
• In underground locations
• Inside of buildings, trains, or other covered
vehicles
• Under any other metal or concrete roof or
structure
• Between tall buildings or under dense
tree-cover
• Near a powerful radio or television tower
101
GPS Enabled
• When your GPS antenna is covered (for
example, by your hand or other object) or
facing the ground
• In temperature extremes outside the
operating limits of your phone
Walking or driving very slowly may also
substantially reduce GPS performance.
Even where location information can be
calculated in such situations, it may take much
longer to do so, and your location estimate may
not be as accurate. Therefore, in any 911 call,
always report the location to the emergency
response center if you can and if you cannot,
remain on your phone for as long as the
emergency response center instructs you.
Even where adequate signals from multiple
satellites are available, your GPS feature will
only provide an approximate location, often
within 150 feet (45 meters) but sometimes
much further from your actual location. Advice
on how to improve GPS performance is
provided in “Enhancing GPS Performance” on
page 104.
While the GPS feature of your phone can be a
valuable navigational aid, it does not replace the
need for careful navigating and good judgment.
Never rely solely on one device for navigation.
Remember that the accuracy of the location
102
information and the time needed to obtain it will
vary depending on circumstances, particularly the
ability to receive signals from adequate numbers of
satellites.
On emergency calls, your phone uses assistance
information from the phone network to improve the
speed and accuracy of your phone’s location
calculation: if such assistance information
becomes unavailable, it may reduce the speed and
accuracy of the location calculation.
The satellites used by the GPS feature of your
phone are controlled by the U.S. government and
are subject to changes implemented in accordance
with the Department of Defense GPS user policy
and the Federal Radionavigation Plan. These
changes may affect the performance of the GPS
feature of your phone.
Making an Emergency Call
Dial 911 to be connected to an emergency
response center. If you are on an active call, you
must end it before calling 911.
When you make an emergency 911 call, the GPS
feature of your phone begins to seek information to
calculate your approximate location. It will take
the GPS feature of your phone some time to
determine your approximate location. Even
where your phone has good access to sufficient
Viewing Your Approximate Location
GPS satellite signals and network assist data, it
may take 30 seconds or more to determine the
approximate location. This time will increase where
there is reduced access to satellite signals. When
your approximate location is determined, it is made
available to the appropriate emergency response
center.
In some cases, your local 911 emergency
response center may not be equipped to
receive GPS location information. For this
reason, and because the GPS location information
reported is only approximate or may not be
available in your location (see “IMPORTANT:
Things to Keep in Mind” on page 101), always
report your location to the 911 operator you
speak to when making an emergency call, if able,
just as you would when using a phone without GPS
capabilities.
Note: If you are concerned about whether your
local 911 emergency response center is
equipped to receive GPS location
information, contact your local authorities.
In general, if your phone has access to signals
from more GPS satellites, your location will be
determined faster and more accurately than if your
phone has access to signals from fewer GPS
satellites.
If your phone does not have adequate access to
GPS satellites signals, the location of the nearest
cell tower in contact with your phone is
automatically made available to the emergency
response center, if the center has the capability to
receive such information.
See “Enhancing GPS Performance” on page 104
for information on how to help your phone
determine your location.
Viewing Your Approximate
Location
1 From the main menu, select GPS > Position.
2 Scroll to view the entire screen.
This displays the following information about the
last time your location was calculated:
• The time (as Greenwich Mean Time) and date
that the location was last calculated
• The approximate location, expressed as latitude
and longitude
• The estimated accuracy of the calculated
location. This estimate of accuracy is only a very
rough estimate and may vary substantially from
the actual accuracy of the approximate location
information reported.
103
GPS Enabled
• The number of satellites used to calculate the
location. In general, more satellites make for
better accuracy.
To calculate your location again:
Press A under Refresh.
It may take your phone several minutes to
complete the process of determining your location.
During this time, a message usually appears on
your phone’s display saying your phone is
scanning for satellites. For tips on getting the best
location calculation, see “Enhancing GPS
Performance”.
The Position screen displays the updated
information.
To cancel a location calculation before it is
completed:
Press A under Cancel to return to the
Position screen. -orPress e to return to the idle screen.
Each time approximate location of your phone is
calculated, the latest location information is stored
in your phone and remains there even when your
phone is powered off. You will see this information
the next time you view the Position screen.
104
If you received a phone call or alert while
attempting to determine your location, the Position
screen will disappear, but your phone will continue
attempting to determine its location. If it is
successful, the new location information will be
displayed the next time you view the Position
screen.
Enhancing GPS Performance
Sometimes the GPS feature of your phone may be
unable to complete a location calculation
successfully. If this happens when you are making
an emergency call, the location of the nearest cell
tower in contact with your phone is made available
to the appropriate emergency response center if
the center has the capability to receive such
information. If this happens when you are trying to
view your location on the phone’s display, you will
see a message indicating that your phone cannot
access satellites.
Enhancing GPS Performance
To improve accuracy and increase your chances of
a successful calculation, do the following while
your phone is determining your approximate
location:
• Stay in the open. The GPS feature works best
where there is nothing between your phone and
a large amount of open sky. If possible, go
outside, away from tall buildings and foliage.
While performance in a building is improved by
moving closer to windows, glass with certain sun
shielding films may block satellite signals.
• Extend your phone antenna.
• Hold your phone to enhance reception. Signals
from GPS satellites are transmitted to your GPS
antenna, which is in your phone antenna. Hold
your phone away from your body, giving the
antenna clear access to satellite signals. Do not
cover the antenna area with your fingers or
anything else.
GPS antenna
105
GPS Enabled
• Stand still. If possible, stand still until your phone
is finished determining your location. Moving
your phone at a walking pace while your phone
is calculating your approximate location may
substantially decrease GPS performance.
• In a car. When using the GPS Enabled feature in
a car, position your phone so that the GPS
antenna has good access to GPS signals
through the car’s windows. Typically, the GPS
antenna has best access to GPS signals in a car
when placed near a window.
Note: Although moving your phone at a walking
pace decreases GPS performance,
moving it at the speed of a moving car
does not.
• Stay in network coverage. Depending on who
your service provider is, the network will provide
your phone with information that helps
determine your location more quickly and
accurately.
Updating Satellite Almanac
Data
Another way to keep the GPS feature of your
phone working well is to keep your satellite
almanac data up to date.
The United States government maintains an
almanac of data about where GPS satellites are as
they orbit the Earth. This information is available to
your phone. Keeping your satellite almanac up to
date helps your phone determine your location
more quickly.
The almanac contains information about the
location of satellites, their operational status, and
other satellite information. Keeping this information
updated enhances the performance of your GPS
feature. In most cases, your phone will be able to
get a fix in strong satellite signal conditions with
outdated almanac data, but it may take longer.
Note: When you make an emergency call, your
phone does not rely upon the almanac to
determine your location.
If your satellite almanac data is out of date, your
phone may prompt you to update it. Follow the
instructions that appear on the phone’s display.
You may be asked to go to a web site or call a
customer care number.
106
Setting Privacy Options
Setting Privacy Options
Your phone’s GPS privacy options control whether
Java applications on your phone or other software
applications may view the location of your
phone.You may set your phone to one of these
GPS privacy options.
Note: Privacy options do not apply to the
transmission of location information
during emergency 911 calls.
To set your GPS privacy options:
1 From the main menu, select GPS > Privacy.
2 If your GPS PIN security feature is enabled,
enter your GPS PIN. (See “Setting the GPS PIN
Security Feature” for more information.)
3 Select the privacy option you want:
• Restricted — No Java or similar software
applications may view the location of your
phone. However, location information may still
be available to the phone’s owner, fleet
manager, or account administrator.
• Unrestricted — All applications may view the
location of your phone, without notifying you.
• By Permission — When an application
attempts to view the location of your phone,
you will be prompted to give permission.
However, location information may still be
available to the phone’s owner, fleet manager,
or account administrator.
Setting the GPS PIN Security Feature
To prevent your GPS privacy settings from being
altered without your knowledge, your GPS privacy
option can be protected by a PIN.
When you receive your phone, the GPS security
feature is turned off, so you do not have to enter a
GPS PIN to access your GPS privacy options. If
you turn this feature on, you will be required to
enter a GPS PIN to access your GPS privacy
options.
To turn the GPS Enabled security feature on or off:
1 From the main menu, select Settings >
Security > GPS PIN.
2 Select On or Off.
3 Enter the current GPS PIN.
Note: When you receive your phone, your GPS
PIN is 0000.
4 Press A under Ok.
107
GPS Enabled
To change your GPS PIN:
1 From the main menu, select Settings >
Security > Change Password > GPS PIN.
2 Enter the current GPS PIN.
Note: When you receive your phone, your GPS
PIN is 0000.
3
4
5
6
7
Press A under Ok.
Enter the new 4- to 8-digit GPS PIN.
Press A under Ok.
Enter the new 4- to 8-digit GPS PIN to confirm.
Press A under Ok.
Using GPS with Map Software
You can use the GPS feature of your phone to
provide approximate location data to a laptop
computer or similar device that is running
interactive map software such as that made by
DeLorme or Microsoft. This way, if your phone has
good access to GPS signals, your approximate
position on a map can be made available as you
travel in a vehicle.
To do this, connect your phone to your laptop (or
other device) with either a data cable or Bluetooth
and set your phone to transmit data (see “Getting
Started” on page 109). Your phone then provides
your approximate location to the device running the
108
map software, which displays your location on a
map. Your phone provides an updated location
every second and the map software displays your
changing location on its map.
See “Enhancing GPS Performance” on page 104
for more details on obtaining good location
information.
Note: Because your phone is continuously
determining your location, using the GPS
feature of your phone with map software
uses the phone’s battery power quickly.
Software Compatibility
Your phone sends location information to your
laptop or other device using the standard National
Marine Electronics Association (NMEA) format.
Your phone supports output messages in
NMEA-0183 format and supports the following
NMEA-0183 sentences: GGA, GLL, GSA, GSV,
RMC, and VTG.
The map software running on your laptop or other
device must support NMEA 3.0.
Using GPS with Map Software
Getting Started
To connect your phone to your laptop or other
device:
1 Open the connector cover.
connector
cover
3 Insert the data plug into the COM port of your
laptop or other device.
To connect your phone to your laptop or other
device via Bluetooth:
Check that the device’s Bluetooth adapter is
properly installed, and then follow the specific
instructions outlined in the device’s user guide to
connect the device to your phone.
Make sure no other application is using the COM
port selected.
Make sure the COM port settings of your laptop or
other device are set to the following:
2 With the phone’s display facing up, insert the
data cable’s connector into the accessory
connector, until you hear a click.
•
•
•
•
•
Bits per second: 4800
Data bits: 8
Parity: None
Stop bits: 1
Flow control: Hardware
To set your phone to send location information to
your laptop or other device:
1 From the main menu, select GPS > Interface.
2 Set NMEA OUT to On.
Your phone is now sending location data to your
laptop or other device.
109
GPS Enabled
To stop your phone from sending location data to
your laptop or other device:
Set NMEA OUT to Off.
Each time you power your phone on, NMEA OUT
is automatically set to Off.
110
Datebook
Datebook stores up to 250 events. You can store
events over a 13 month period — 12 months after
and 1 month before the current date.
A Datebook event contains:
• A subject — A name you assign to the event.
You can also enter a phone number, Private ID,
or Talkgroup number here. After the event is
stored, you can call this number from Datebook
or when you get a reminder of this event.
• A location — The location of the event. You can
also enter a phone number, Private ID, or
Talkgroup number here. After the event is
stored, you can call this number from Datebook
or when you get a reminder of this event.
• A start time — The start time automatically
assigned to an event is the beginning of the day.
You can change the start time, or assign no start
time, before storing the event.
• A duration — The length of time the event lasts.
• A date — The date automatically assigned to an
event is the date that was highlighted or
selected when you began creating the event.
You can change this date before storing the
event.
• A repeat — lets you store the event as a
recurring event.
• A reminder — If an event has a start time, you
can set Datebook to remind you that the event is
going to start.
• a ring tone for the reminder
• a profile that your phone is switched to while the
event is occurring
• a Java application that starts when the event
starts
Only the subject and date are required.
Viewing Datebook
To access Datebook:
From the main menu, select Datebook.
You can view Datebook by the day, by the week, or
by the month. You can also view the details of any
event.
In day view, brief information about each event for
that day appears.
In week view, events appear as markers
corresponding to their times.
In month view, days with events appear with a
marker in the corner.
111
Datebook
To view an event:
Creating Events
1 Select the day the event occurs.
2 Select the event.
Every Datebook event must have a subject and be
stored to a date. Other information is optional.
To change the current view:
You may enter the information in any order by
scrolling through the event details.
1 While viewing Datebook, press m.
2 Select the view you want.
Navigating Datebook
After you have entered the information you want,
you can press A under Done to store the event
to Datebook.
To scroll through Datebook:
If you decide you do not want to store the event:
Scroll left and right using the navigation key. -orIn week view and month view, press * or #.
To see more in day view:
Scroll up and down using the navigation key.
To highlight a day in month view:
Enter the date using the keypad.
To go to today’s date:
1 While viewing Datebook, press m.
2 Select Go To Today.
To go to any date in Datebook:
1 While viewing Datebook, press m.
2 Select Go To Date.
3 Select the date you want.
112
Press A under Cancel.
To create a Datebook event:
1 While viewing Datebook, press A under New.
-orIn day view, select [New Event].
2 To assign a subject to the event:
Select Subject.
Enter the name. -orPress A under Browse to choose from
common event names. -orEnter a phone number, Private ID, or Talkgroup
number. After the event is stored, you can call
this number.
When you are finished, press O.
Creating Events
3 If you want to assign a location to the event:
Select Location.
Enter the date you want.
7 If you want to make the event a recurring event:
Enter the location. -or-
Select Repeat.
Enter a phone number, Private ID, or Talkgroup
number. After the event is stored, you can call
this number.
Select the repeat cycle you want.
When you are finished, press O.
4 The start time automatically assigned to an
event is the beginning of the day. If you want to
change the start time or assign no start time:
Select Start.
Enter the start time you want. -orPress A under No Time to assign no start
time.
5 If you want to assign a duration to the event:
Select Duration.
Select the duration you want. -orSelect Custom to enter a duration.
6 The date automatically assigned to an event is
the date that was highlighted or selected when
you began creating the event.
If the event occurs more than once a week:
Select Multiple Day. Select the days you want.
Press A under Done.
Select the date you want this event to stop
recurring.
8 If you want to create a reminder for this event:
Select Reminder.
Select the reminder time you want. -orSelect Custom to enter a reminder time.
Note: If an event has no start time, you cannot
create a reminder for it.
9 If you have entered all the information you want
for this event, press A under Done. -orIf you want to assign a ring tone, a profile, or a
Java application to the event, see “Assigning
More Options” on page 114.
To change the date of the event:
Select Date.
113
Datebook
Assigning More Options
Editing Events
To assign more options before storing an event:
To change the details of an event:
1 If you have created a reminder for the event and
want to set the ring tone for that reminder:
1 Select the day the event occurs.
2 Select the event.
3 Press A under Edit.
Tip: To copy an event to another date: Press m.
Select Copy.
Select Ring Tone.
Select the ring tone you want from the ring tones
stored in your phone.
2 If you want to assign a profile that your phone is
switched to while the event is occurring:
Select Profile.
Select the profile you want from the profiles
stored in your phone.
Your phone switches to this profile when the
event starts and switches back to the previous
profile when the event ends.
3 If you want to assign a Java application to start
when the event starts:
4 Follow the applicable instructions in “Creating
Events” on page 112 to edit the various fields.
Deleting Events
1
2
3
4
5
Select the day the event occurs.
Select the event.
Press m.
Select Delete.
If the event is not a recurring event, press O or
press A under Yes to confirm. -or-
Select App.
If the event is a recurring event:
Select the application you want from the Java
applications stored in your phone.
Select This Event Only to delete only the event
selected in step 2. -or-
If you created a reminder for this event, your
phone prompts you to start the Java application
when you get the reminder.
Select Repeat Event to delete all occurrences
of the event.
114
Receiving Reminders
Receiving Reminders
If you created a reminder for a Datebook event,
when the reminder time occurs, your phone notifies
you with text on the display and a reminder tone.
To view more details about the event:
Press A under View.
To dismiss the reminder:
Press O. -orPress A under Dismiss.
If you store numbers in both the Subject and
Location fields, you can call or send a call alert to
the number stored in Subject and the number
stored in Location as long as the number stored in
Subject is a Private or Talkgroup number and the
number stored in Location is a phone number.
If both are the same type of number, the number in
Subject is called or sent a call alert. To call or send
a call alert to the number stored in Location, you
must delete the number stored in Subject.
Making Calls from Datebook
For Events with Java Applications
To make a phone call:
If you assigned a Java application to start when the
event starts, you can start the application when you
get the reminder.
1 Highlight or select the event containing the
number you want to call or send a call alert to.
2 Press s. -or-
1 Press m.
2 Select Launch.
To make a Private call or Talkgroup call:
Making Calls From Datebook
and Datebook Reminders
If you stored a phone number, Private ID, or
Talkgroup number in the Subject or Location field
of a Datebook event, you can call or send a call
alert to that number from Datebook or from the
reminder of that event.
Press m. Select Call # in Event.
1 Highlight or select the event containing the
number you want to call or send a call alert to.
2 Press and hold the PTT button on the side of
your phone. -orIf you did not include a # before the Talkgroup
you want to call: Press m. Select Talkgroup.
115
Datebook
To send a call alert:
1 Highlight or select the event containing the
number you want to call or send a call alert to.
2 Press m. Select Alert # in Event.
Making Calls from Datebook
Reminders
To call a number:
Press s. -orPress m. Select Call # in Event.
To make Private calls or Talkgroup calls:
Press the PTT button.
To send a call alert:
Press m. Select Alert # in Event.
Customizing Datebook Setup
To access Datebook set up options:
1 From the main menu, select Datebook.
2 Press m.
3 Select Setup.
You can view or change these options:
116
• Start View — sets Datebook to start in day view,
week view, or month view when you access
Datebook.
• Daily Begin — sets the beginning of your day.
This is the earliest time of day displayed in week
view, if you have a 12-hour day view.
• Delete After — sets the amount of time
Datebook waits to delete an event after it
occurs.
• Time Shift — lets you shift the times of all
Datebook events. This is useful if you are
traveling to a different time zone.
• Alert Timeout — sets the amount of time a tone
continues to sound when you receive a
Datebook reminder.
• Clock — controls whether the time and date
appear on the idle screen; sets time and date
format; sets year.
Customizing Your Phone
Setting the Volume
Of the Earpiece and Speaker
1 From the main menu, select Settings > Volume.
2 Scroll to Earpiece to set the earpiece volume.
-orScroll to Speaker to set the speaker volume.
3 To set the volume:
Scroll left or right. -orPress the volume controls.
Of the Ringer
Press the volume controls.
Setting Your Phone to Vibrate
To set your phone to vibrate instead of making a
sound when you receive phone calls, Private calls,
group calls, SDG calls, call alerts, message
notifications, pictures sent using Send via PTT,
and Datebook reminders, see “Setting Your Phone
to Vibrate” on page 54.
To set your phone to vibrate instead of making a
sound when you receive Private calls, group calls,
and SDG calls, even if you want your phone to ring
for other features:
1 From the main menu, select Settings > 2-Way
Radio > Alert Type.
Tip: If Alert Type does not appear: From the
main menu, select Ring Tones. Make sure
VibeAll is set to Off. Repeat step 1.
2 Select Vibrate to set your phone to vibrate.
Tip: Select Silent in step 2 to set your phone to
neither vibrate nor make a sound.
Changing the Look of Your
Phone
Themes
A theme lets you control the look of the display by
changing the color scheme, wallpaper, the look of
the main menu, and the look of the display options.
To change the theme of your phone:
1 From the main menu, select Settings >
Display/Info > Theme
2 Select the theme you want.
117
Customizing Your Phone
Wallpaper
A wallpaper is an image that appears on the idle
screen.
Note: Some themes may prevent you from
changing your wallpaper.
Choosing a Wallpaper
1 From the main menu, select Settings >
Display/Info > Wallpaper > Wallpaper.
2 Select the wallpaper you want.
Tip: If you want to see what the wallpaper looks
like, press A under View.
Setting Wallpaper to Change Automatically
Note: This feature may not be offered by your
service provider.
1 From the main menu, select Settings >
Display/Info > Wallpaper > Auto Cycle.
2 Select how often you want the wallpaper to
change.
Any of the wallpapers in your phone may appear
on the idle screen.
Including Pictures From the Media Center
If you have set wallpapers to change automatically,
you can include pictures stored in the media center
as images that may appear on the idle screen.
118
Note: Pictures sent to you using Send via PTT
cannot be set as wallpaper.
1 From the main menu, select Settings >
Display/Info > Wallpaper > Select Pictures.
2 Select the pictures you want. -orSelect All to include all pictures in the media
center.
3 When you are finished, press A under Done.
Setting Text Size
To set the size of the text on the display:
1 From the main menu, select Settings >
Display/Info > Text Size.
2 Select the option you want:
• Zoom — 11 characters per line
• Standard — 14 characters per line
• Compressed — 18 characters per line
To set your phone to briefly display very large
digits when you enter numbers at the idle screen:
1 From the main menu, select Settings >
Display/Info > Large Dialing.
2 Set this option to Large Digits.
Changing the Look of Your Phone
Setting Contrast
To set the contrast of the display:
1 From the main menu, select Settings >
Display/Info > Contrast.
2 Scroll left or right to set the contrast.
Setting the Menu View
You can set the items on your main menu and Java
applications menu to appear as large icons or a
list:
1 From the main menu, select Settings >
Display/Info > Menu View. -orFrom the main menu: Press m. Select Main
Menu Setup > Menu View.
2 To choose a list, select List View. -orTo choose large icons, select Icon View.
Setting the Backlight
A backlight lights the display and keypad when you
make or receive a call, or press keys or buttons.
You can control how many seconds the backlight
stays on. The available intervals are: 5 seconds, 10
seconds, 20 seconds, 30 seconds, 60 seconds, or
90 seconds.
When the backlight is off, pressing a key on the
keypad turns the backlight on but does not perform
the action associated with the key.
Note: When your phone enters Sleep mode, the
backlight turns off.
To turn the backlight off:
From the main menu, select Settings >
Display/Info > Backlight > Off.
To control how long the backlight stays on:
1 From the main menu, select Settings >
Display/Info > Backlight > Timer.
2 Select the number of seconds you want the
backlight to stay on.
To control how long the backlight stays on while a
Java application is displayed:
1 Select Settings > Display/Info > Backlight >
Java Timer.
2 Select the number of seconds you want the
backlight to stay on.
To set the keypad backlight to light up only in low
light conditions:
1 From the main menu, select Settings >
Display/Info > Backlight > Sensor.
2 Set this option to On.
119
Customizing Your Phone
Setting Sleep Mode
Sleep mode turns off your phone’s display if your
phone remains idle for a specified interval. Sleep
mode conserves battery power.
You can set your phone to enter Sleep mode after
1 minute, 3 minutes, 5 minutes, or 15 minutes of
inactivity.
To set the interval for Sleep mode:
1 From the main menu, select Settings >
Display/Info > Sleep Mode.
2 Select the interval you want.
Airplane Mode—Temporarily
Turning Off Calls
Note: While powering on your phone, you can
turn on Airplane mode by pressing p for
more than 5 seconds.
This icon U appears.
To restore your phone’s ability to do all these
things:
Set this option to Off.
Note: When Airplane Mode is set to On, your
phone’s Bluetooth capability is disabled,
and all active Bluetooth connections are
dropped.
Using Settings
Settings contains many submenus that let you
customize your phone.
Sometimes you may want to have your phone on,
but turn off its ability to make and receive calls,
such as when you are on an airplane.
For information on applying groups of settings to
your phone together, see “Profiles” on page 125.
To set your phone so that it cannot make or receive
phone calls, Private calls, or group calls; or transfer
data:
Display/Info Features
1 From the main menu, select Settings >
Advanced > Airplane Mode.
2 Set this option to On.
120
The Display/Info menu controls how the keypad
and display appear:
• Wallpaper — controls the wallpaper that
appears on the idle screen.
• Theme — changes the look of the display.
• Text Size — sets the size of text on the display.
Using Settings
• Home Icons — controls whether main menu
icons appear on the idle screen.
• Sleep Mode — controls the interval that elapses
before your phone enters Sleep mode.
• Backlight — controls backlight illumination.
• Clock — controls whether the time and date
appear on the idle screen; sets time and date
format; sets year.
• Menu View — controls whether the items on
your main menu and Java applications menu
appear as large icons or a list.
• Large Dialing — sets large digits to appear on
the idle screen when you enter a number.
• Contrast — sets the contrast of the display.
• Status Light — controls the LED status light
located in the top left corner on the front of your
phone. See page 2.
• Language — sets the language that your phone
displays.
Phone Calls Features
The Phone Calls menu controls how your phone
handles phone calls:
• Any Key Ans — If this feature is on, you can
answer calls by pressing any key on the keypad.
• Auto Redial — sets your phone to automatically
redial calls you make when the system is busy.
• Call Waiting — See “Call Waiting” on page 38.
• Auto Ans — sets your phone to automatically
answer an incoming call after a specified
number of rings. When this feature is on, the
phone answers by connecting you to the caller;
it does not send the call to voice mail, unless
you are out of coverage or on the line.
• Minute Beep — causes a beep to sound every
minute of an active call.
• Call Duration — causes the duration of a call to
appear on the display when the call ends.
• TTY — See “Making TTY Calls” on page 43.
• Notifications — See “Message Notifications” on
page 60.
• Java App Control — If you have installed a
Java application that answers phone calls, this
setting lets you turn that application on.
• DTMF Dialing — sets whether you can hear
keypad presses during a call.
• Set Line — sets phone line 1 or phone line 2 as
the active line for outgoing calls.
121
Customizing Your Phone
2-Way Radio Features
The 2-Way Radio menu controls how your phone
handles Private calls, group calls, and SDG calls:
• Tkgrp Silent — controls whether you hear
group calls to your Talkgroup. See “Call Timers”
on page 41.
• Tkgrp Area — lets you define your Talkgroup
area.
• One Touch PTT — See “One Touch PTT” on
page 40.
• Alert Type — controls how your phone notifies
you when you receive Private calls, group calls,
and SDG calls.
• PTT Picture — sets your phone’s ability to send
and receive pictures in Private calls. See “Using
Send via PTT” on page 78.
Personalize Features
The Personalize menu makes main menu items
easier to access.
• Menu Options — Reorder Menu lets you
change the order of the items on the main menu
by grabbing and moving them; Add/Remove
Apps lets you create a shortcut to a Java
application on the main menu.
• Up Key — sets the main menu item you access
when you scroll up from the idle screen.
• Down Key — sets the main menu item you
access when you scroll down from the idle
screen.
• Left Key — sets the main menu item you access
when you scroll left from the idle screen.
• Right Key — sets the main menu item you
access when you scroll right from the idle
screen.
• Center Key — sets the main menu item you
access when you press O from the idle screen.
• Left Softkey — sets the main menu item you
access when you press the left option key from
the idle screen.
• Right Softkey — sets the main menu item you
access when you press the right option key from
the idle screen.
• Power Up — sets the main menu item you see
when you power on your phone. To set the idle
screen to be the first thing you see when you
power on your phone, select Default Ready.
Volume Features
The Volume menu sets the volume of sounds your
phone makes:
• Line 1 — sets ringer volume for phone line 1.
122
Using Settings
• Line 2 — sets ringer volume for phone line 2.
• Messages — sets the volume of message
notifications and Datebook reminders.
• Earpiece — sets the volume of sound coming
out of the earpiece.
• Speaker — sets the volume of sound coming
out of the speaker.
• Keypad — sets the volume of sound associated
with pressing keys and buttons.
• Java Earpiece — sets the volume of sound
associated with Java applications coming out of
the earpiece.
• Java Speaker —sets the volume of sound
associated with Java applications coming out of
the speakers.
• Data — sets the volume of sounds that notify
you that you are receiving a circuit data call.
Advanced Features
Security Features
The Advanced menu contains advanced and rarely
used Settings features.
The Security menu lets you turn security features
on and off and change passwords:
• Alert Timeout — sets the amount of time a tone
continues to sound when you receive a
message notification, call alert, or Datebook
reminder.
• Headset/Spkr — sets the headset option. See
“Using a Headset” on page 132.
• Phone Lock —turns on a feature that locks your
phone: Lock Now takes effect immediately;
Auto Lock takes effect when your phone is
powered off and then on. An unlock code is
•
•
•
•
required to enable this feature, to unlock the
phone, and to set a new unlock code. Contact
your service provider for your default unlock
code.
Keypad Lock — locks the phone’s keypad,
either immediately or automatically after a set
period of inactivity.
SIM PIN — enables and disables your phone’s
SIM PIN security feature. See “Turning the PIN
Requirement On and Off” on page 13.
GPS PIN — enables and disables your phone’s
GPS PIN security feature. See “Setting the GPS
PIN Security Feature” on page 107.
Change Passwords — changes your phone
unlock code, security code, SIM PIN, and GPS
PIN.
123
Customizing Your Phone
• Connectivity — Network ID sets the phone’s
network IDs and their roaming options under the
direction of your service provider; Master Reset
lets your service provider reset your service in
the event of a security or provisioning problem.
• Reset Defaults — Reset Settings returns all
settings to their original defaults; Reset All
returns all settings to their original defaults and
erases all stored lists. Use only under the
direction of your service provider.
• Return to Home — controls how long the recent
calls list displays after calls.
• Airplane Mode — prevents your phone from
making or receiving phone calls, Private calls,
group calls, or SDG calls; or transferring data.
• Phone Only — prevents your phone from
making or receiving Private calls, group calls, or
SDG calls; or transferring data.
Note: This feature may not be offered by your
service provider.
• Baud Rate — sets the baud rate at which your
phone communicates with a laptop computer,
PC, or similar device.
124
Profiles
Viewing Profiles
A profile is a group of settings saved together so
that you can apply them to your phone easily.
To view the profiles stored in your phone:
A profile contains these settings:
• Ring Tones — sets all options described in
“Ring Tones” on page 54, except assigning ring
tones to Contacts.
• Display/Info — sets Wallpaper, Color Palette,
Text Size, and Backlight options. See
“Display/Info Features” on page 120.
• Phone Calls — sets Set Line and Auto Ans
options. See “Phone Calls Features” on page
121.
• Volume — sets all options described in “Volume
Features” on page 122.
• Call Filter — controls which calls, call alerts,
and message notifications your phone responds
to. See “Setting Call Filtering” on page 128.
• Advanced — sets headset option. See “Using a
Headset” on page 132.
Your phone arrives with pre-set profiles. You can
also create your own profiles.
1 From the main menu, select Profiles.
2 Scroll to the profile you want to view.
Tip: The profile that is currently in effect on your
phone has a checkmark next to it.
3 Press A under View.
4 Scroll to view settings.
Switching Profiles
To apply a profile to your phone:
1 From the main menu, select Profiles.
2 Scroll to the profile you want to apply.
3 Press O.
The profile you selected is now in effect.
How Changing Settings
Affects Profiles
Many of the settings contained in profiles can be
set without switching or editing profiles — for
example, by selecting Settings or Ring Tones to
set options, or by setting the volume of the phone’s
ring using the volume controls.
125
Profiles
When you do this, your phone either:
Temporary Profiles
• Updates the profile in effect to reflect these
changes, without notifying you -or• Creates a temporary profile that contains these
changes
Note: This feature may not be offered by your
service provider.
If your phone is set to create temporary profiles, a
temporary profile is created when you make
changes to settings without switching or editing
profiles.
To set your phone to create a temporary profile
that contains changes you make to settings:
1
2
3
4
From the main menu, select Profiles.
Press m.
Select Setup > Temp Profile.
Set this option to On.
To set your phone to update the profile in effect to
reflect any changes you make to settings:
Set Temp Profile to Off in step 4.
If your service provider does not offer the Temp
Profile option, your phone always updates the
profile in effect to reflect the changes you make to
settings.
A temporary profile is based on the profile in effect
when you made the changes, but reflects the
changed settings. Making more changes further
updates the temporary profile, for as long as it is in
effect.
A temporary profile stays in effect until you switch
profiles, power off your phone, or delete it (or the
profile it is based on) from the list of profiles.
If you do not store a temporary profile, it is deleted
when you switch profiles or power off your phone.
A temporary profile is automatically given the same
name as the profile it is based on, but with an
asterisk (*) in front of it.
When you view a temporary profile’s settings, the
options that differ from the profile it is based on
have an asterisk in front of them.
Storing a Temporary Profile
To store a temporary profile as a new profile:
1 From the main menu, select Profiles.
126
Creating Profiles
2
3
4
5
Scroll to the temporary profile.
Press m.
Select Store As New.
Enter the name you want to give the profile.
When you are finished, press O.
To overwrite the profile the temporary profile is
based on:
1
2
3
4
From the main menu, select Profiles.
Scroll to the temporary profile.
Press m.
Select Store Changes.
The temporary profile is stored with the name of
the profile it is based on. The profile it is based on,
as it existed before you made changes to settings,
is gone.
want to base this profile on. If you do not choose
a profile to copy from, the new profile is based
on a default profile.
5 Press A under Create.
6 Scroll through the list of options and set their
values.
7 Press A under Done.
Editing Profiles
1
2
3
4
5
From the main menu, select Profiles.
Scroll to the profile you want to edit.
Press m.
Select Edit.
Scroll through the list of options and set their
values.
Creating Profiles
Deleting Profiles
1 From the main menu, select Profiles.
2 Select [New Profile]. -or-
To delete a profile:
Scroll to any profile. Press m. Select New.
3 Enter the name you want to give the profile.
When you are finished, press O.
4 If you want to base this profile on an existing
profile: Select Copy from. Select the profile you
1 From the main menu, select Profiles.
2 Select the profile you want to delete.
Note: A temporary profile is automatically
deleted when the profile it is based on is
deleted.
3 Press m.
4 Select Delete.
127
Profiles
5 Press O or press A under Yes to confirm.
To delete all profiles:
1
2
3
4
From the main menu, select Profiles.
Press m.
Select Delete All.
Press O or press A under Yes to confirm.
Setting Call Filtering
The call filtering setting in each profile lets you
control which calls, call alerts, and message
notifications your phone notifies you of, and which
it ignores.
To set call filtering:
1 While setting options for a profile, select Call
Filter.
2 To set filtering options for phone calls, select
Phone.
• Off sets your phone to notify you of all phone
calls.
• All sets your phone to ignore all phone calls.
• All Contacts sets your phone to notify you
only of phone calls from numbers stored in
Contacts.
128
• Some Contacts sets your phone to notify you
only of phone calls from numbers you select
from Contacts.
3 If you set the Phone option to Some Contacts,
select up to 5 Contacts entries that contain
phone numbers you want to be notified of calls
from.
When you are finished, press A under Done.
4 To set filtering options for Private calls and group
calls, select Prvt/Grp.
• Off sets your phone to notify you of all Private
calls and group calls.
• On sets your phone to ignore all Private calls
and group calls.
5 To set filtering options for SDG calls, select
SDGC.
• Off sets your phone to notify you of all SDG
calls.
• On sets your phone to ignore all SDG calls.
6 To set filtering options for call alerts, select
Alerts.
• Off sets your phone to notify you of all call
alerts.
• On sets your phone to ignore all call alerts.
7 To set filtering options for message notifications,
select Notifications.
Setting Call Filtering
• Off sets your phone to notify you of all
messages.
• Voice Messages sets your phone not to
sound a tone or vibrate when you receive
voice messages.
• Text Messages sets your phone not to sound
a tone or vibrate when you receive text
messages.
• All sets your phone not to sound a tone or
vibrate when you receive any message.
Note: When you receive a type of message you
have set not to sound a tone or vibrate,
the message notification screen appears
as usual.
8 Press A under Done.
129
Shortcuts
Shortcuts lets you access most menu options by
pressing a number on your keypad (1 through 9) or
saying the voice name of the shortcut. You create
the shortcut and then use it to take you to that
screen any time.
Creating a Shortcut
Note: When you receive your phone, all number
keys may already be assigned to
shortcuts. If this is the case, you can
create new shortcuts by deleting or
replacing existing shortcuts.
1 Go to the menu item you want to create a
shortcut for.
For example, if you want to create a shortcut to
the screen for creating a new Contacts entry:
From the main menu, select Contacts, then
highlight [New Contact].
2 Press and hold m until a confirmation screen
appears.
3 Press O or press A under Yes.
4 Select Key.
5 Press the number key you want to assign to the
shortcut.
130
6 Press O.
7 If you want to record a voice name for the
shortcut: Select Voice. As directed by the
screen prompts, say and repeat the name you
want to assign to the number. Speak clearly into
the microphone.
8 Press A under Done.
9 If the number key you chose is already assigned
to a shortcut, a prompt appears asking if you
want to replace the existing shortcut.
Press A under Yes to replace the existing
shortcut. -orPress A under No if you want to keep the
existing shortcut and assign another number key
to the shortcut.
Using a Shortcut
If you know the shortcut number:
1 From the idle screen, press m.
2 On your keypad, press the number assigned to
the shortcut.
If you do not know the shortcut number:
1 From the main menu, select Shortcuts.
Editing a Shortcut
2 Scroll to the shortcut you want to use. -orIf you assigned a voice name to the shortcut:
Press and hold t. Say the voice name into
your phone. The shortcut with that voice name is
then highlighted.
3 Press A under Edit.
4 With Key or Voice highlighted, press O to
change assignments.
Deleting Shortcuts
3 Press O.
To delete a shortcut:
Editing a Shortcut
1
2
3
4
5
To change the number assigned to a shortcut:
1
2
3
4
5
6
From the main menu, select Shortcuts.
With any shortcut highlighted, press m.
Select Reorder.
Scroll to the shortcut you want to move.
Press A under Grab.
Scroll to the place where you want the shortcut
to appear.
7 Press A under Insert.
8 Repeat step 4 through step 7 for all the items
you want to move.
9 Press A under Done.
From the main menu, select Shortcuts.
Scroll to the shortcut you want to delete.
Press m.
Select Delete.
Press O or press A under Yes to confirm.
To delete all shortcuts:
1
2
3
4
From the main menu, select Shortcuts.
With any shortcut highlighted, press m.
Select Delete All.
Press O or press A under Yes to confirm.
To change the number or voice name assigned to
a shortcut:
1 From the main menu, select Shortcuts.
2 Highlight any shortcut.
131
Using a Headset
Attaching a Headset
If you use a headset or similar device with your
phone, you can set your phone to send incoming
sound to the headset only, or to the headset and
the speaker at the same time.
1 Lift the audio jack cover.
2 Insert the headset connector firmly into the
audio jack. You may have to rotate the headset
connector until it fits securely into the audio jack.
Note: The preferred connection to your phone is
a wired audio device. If you insert a wired
headset into the audio jack on your
phone, audio will be routed to the wired
headset and you will lose your Bluetooth
headset connection.
1 From the main menu, select Settings >
Advanced > Headset/Spkr.
2 Select HdsetOnly to send incoming sound to
the headset only. -orSelect Hdset&Spkr to send incoming sound to
the headset and ring tones to the speaker.
Using a Bluetooth Headset
You can use your i605 wirelessly with a Bluetooth
headset. This type of wireless headset lets you
connect quickly to devices that are within range.
For more information, refer to your Bluetooth
headset’s user guide.
132
Using a Remote PTT Button
If you are using a headset or other accessory with
a remote PTT button, you can use the remote PTT
button for phone calls and Private calls.
For phone calls, use the remote PTT button to
answer calls, switch between calls, and end calls.
Hold the remote PTT button for less than 2
seconds to answer calls and switch between calls.
Hold the remote PTT button for more than 2
seconds to end calls.
For Private calls, group calls, and SDG calls, use
the remote PTT button as you would the PTT
button on your phone.
Note: When using a headset, the PTT button on
your phone works the same way as when
you are not using a headset. Sounds
associated with Private calls, group calls,
and SDG calls are heard through the
headset.
Understanding Status
Messages
Status
Messages
Message Description
System Busy
You may receive status messages under certain
conditions. Before contacting Customer Care, note
the message, numeric code, and the conditions
under which it appeared. The following table lists
and describes the status messages.
The system is experiencing heavy
traffic. Please try again later.
Service Conflict This service cannot be enabled
because an incompatible service has
already been turned on.
Status
Messages
Message Description
Number Not in
Service
The number that you entered is not
valid.
User Not
Available
The phone that you called is either
busy, out of coverage, or turned off.
Please try again later.
User Not
Authorized
The person that you called has not
purchased this service.
Please Try Later This service is temporarily not
available. Please try again later.
Service
Restricted
This service was restricted by your
service provider, or this service was
not purchased.
Service Not
Available
You are either out of coverage or
having problems with provisioning.
Please Try
Again
An error occurred. Please try again.
SIM PIN
incorrect. Try
again.
You have entered an incorrect PIN
number.
Please Enter
Special Code
You have inserted a SIM card that will
not work with your service provider’s
phone. Contact Customer Care if you
believe this is a valid SIM card.
Self Check Error A fault was detected with your phone.
+ Number Code If this error recurs, note the error code
and contact Customer Care.
Self Check Fail An operational fault was detected with
+ Number Code your phone. Note the numeric code,
turn your phone off, and contact
Customer Care.
133
Understanding Status Messages
Status
Messages
Message Description
Status
Messages
Message Description
PIN Blocked
Call Your
Provider
The incorrect PIN was entered 3
consecutive times. You will be unable
to place or receive calls on your
phone. Contact Customer Care to
have them obtain the PIN Unblocking
Key (PUK) code.
No Devices
Found
No devices were found during your
Bluetooth search.
Bluetooth Link
Is Busy
A Bluetooth error occurred. Please try
again.
Insert SIM
Your SIM card is not being detected.
Please check to ensure that you have
inserted the SIM card correctly into
your phone.
Invalid PIN
The incorrect PIN for the given
Bluetooth device was entered. Please
try again.
Enter SIM PIN
Please enter your 4- to 8- digit SIM
PIN code.
Bluetooth
Power Failed
An error occurred with Bluetooth
power. Please try again.
Enter Unlock
Code
Auto Phone Lock is activated. Enter
your unlock code.
Unable to
Connect
Your phone could not establish a
Bluetooth connection. Please try
again.
New Browser
Message
Memory Full!
Warns of low memory for Net Alerts.
Bluetooth Not
Initialized
Bluetooth is not ready. Please try
again.
Scanning for
Satellites
Searching for GPS satellites.
Unable to
Locate Sats
Could not find GPS satellites.
Technical Error A problem occurred in your phone’s
GPS circuitry. If this error occurs,
contact Customer Care.
134
Unable to Bond Bonding has timed out. Please try
again.
Bluetooth Bond A new device is trying to bond with
Failed: List Full your phone, but the device history is at
its maximum of 20 devices.
Bluetooth
Device
Database Error
An error with the Bluetooth device
database has occurred. Please contact
your service provider.
Status
Messages
Message Description
Bluetooth
Service
Database Error
An error with the Bluetooth service
database has occurred. Please contact
your service provider.
Connection
Failed!
A Bluetooth error has occurred while
trying to transfer an object.
Object Too
Large For
Transfer!
The object you are trying to transfer is
too large.
Unsupported
Object Type!
The object being transferred is of an
unsupported type.
Unable To
Store: Space
Exceeded
The object cannot be stored because
you do not have enough space in
Contacts/Datebook/Media Center.
135
Safety and General
Information
IMPORTANT INFORMATION ON SAFE AND
EFFICIENT OPERATION.
READ THIS INFORMATION BEFORE USING
YOUR INTEGRATED MULTI-SERVICE
PORTABLE RADIO.
RF Operational
Characteristics
Your radio product contains a radio frequency
transmitter to convey the information you wish to
send as well as occasional automatic signals used
to sustain connection to the wireless network, and
a receiver which enables you to receive
communication and connection information from
the network.
Portable Radio Product
Operation and EME Exposure
Your Motorola radio product is designed to comply
with the following national and international
standards and guidelines regarding exposure of
human beings to radio frequency electromagnetic
energy (EME):
136
• United States Federal Communications
Commission, Code of Federal Regulations; 47
CFR part 2 sub-part J.
• American National Standards Institute (ANSI) /
Institute of Electrical and Electronics Engineers
(IEEE). C95. 1-1992.
• Institute of Electrical and Electronics Engineers
(IEEE). C95. 1-1999 Edition.
• International Commission on Non-Ionizing
Radiation Protection (ICNIRP) 1998.
• Ministry of Health (Canada). Safety Code 6.
Limits of Human Exposure to Radiofrequency
Electromagnetic Fields in the Frequency Range
from 3 kHz to 300 GHz, 1999.
• Australian Communications Authority
Radiocommunications (Electromagnetic
Radiation - Human Exposure) Standard 2003.
• ANATEL, Brasil Regulatory Authority, Resolution
303 (July 2, 2002) "Regulation of the limitation of
exposure to electrical, magnetic, and
electromagnetic fields in the radio frequency
range between 9 kHz and 300 GHz."
"Attachment to Resolution 303 from July 2,
2002."
Portable Radio Product Operation and EME Exposure
To assure optimal radio product performance
and make sure human exposure to radio
frequency electromagnetic energy is within the
guidelines set forth in the above standards,
always adhere to the following procedures:
Phone Operation
When placing or receiving a phone call, hold your
radio product as you would a wireline telephone.
Speak directly into the microphone.
Two-way radio operation
Your radio product has been designed and tested
to comply with national and international standards
and guidelines regarding human exposure to RF
electromagnetic energy, when operated in the
two-way mode (at the face, or at the abdomen
when using an audio accessory) at usage factors
of up to 50% talk/50% listen.
Transmit no more than the rated duty factor of 50%
of the time. To transmit (talk), push the
Push-To-Talk (PTT) button. To receive calls,
release the PTT button. Transmitting 50% of the
time or less, is important because this radio
generates measurable RF energy only when
transmitting (in terms of measuring for standards
compliance).
When using your radio product as a
traditional two-way radio, hold the
radio product in a vertical position
with the microphone one to two
inches (2.5 to 5 cm) away from the
lips.
Body-worn operation
To maintain compliance with FCC RF exposure
guidelines, if you wear a radio product on your
body when transmitting, always place the radio
product in a Motorola approved clip, holder,
holster, case or body harness for this product.
Use of non-Motorola-approved accessories may
exceed FCC RF exposure guidelines. If you do
not use a Motorola approved body-worn
accessory and are not using the radio product
in the intended use positions along side the
head in the phone mode or in front of the face
in the two-way radio mode, then ensure the
antenna and the radio product are kept the
following minimum distances from the body
when transmitting
• Phone or Two-way radio mode: one inch (2.5
cm)
• Data operation using any data feature with or
without an accessory cable: one inch (2.5
cm)
137
Safety and General Information
ALL MODELS WITH FCC ID AZ489FT5838 MEET THE
GOVERNMENT’S REQUIREMENTS FOR EXPOSURE
TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It
is designed and manufactured not to exceed the emission
limits for exposure to radiofrequency (RF) energy set by
the Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for
the general population. The guidelines are based on
standards that were developed by independent scientific
organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit set by the FCC is
1.6W/kg.1 Tests for SAR are conducted using standard
operating positions reviewed by the FCC with the phone
transmitting at its highest certified power level in all tested
frequency bands. Although the SAR is determined at the
highest certified power level, the actual SAR level of the
phone while operating can be well below the maximum
value. This is because the phone is designed to operate at
multiple power levels so as to use only the power required
to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a phone model is available for sale to the public, it
must be tested and certified to the FCC that is does not
exceed the limit established by the government-adopted
requirement for safe exposure. The tests are performed in
positions and locations (e.g., at the ear and worn on the
138
body) as required by the FCC for each model. The highest
SAR value for this model phone when tested for use at the
ear is 1.25 W/kg and when tested on the body, as
described in this user guide, is 1.16 W/kg during packet
data transmission. (Body-worn measurements differ
among phone models, depending upon available
accessories and FCC requirements.)2
While there may be differences between the SAR levels of
various phones and at various positions, they all meet the
government requirement for safe exposure.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC
and can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID
AZ489FT5838.
Additional information on Specific Absorption Rates (SAR)
can be found on the Cellular Telecommunications Industry
Association (CTIA) web-site at http://www.wow-com.com.
In the United States and Canada, the SAR limit for
mobile phones used by the public is 1.6 watts/kg (W/kg)
averaged over one gram of tissue. The standard
incorporates a substantial margin of safety to give
additional protection for the public and to account for any
variations in measurements.
2 The SAR information reported to the FCC includes the
FCC-accepted Motorola testing protocol, assessment
procedure, and measurement uncertainty range for this
product.
1
Electromagnetic Interference/Compatibility
Antenna Care
Facilities
Use only the supplied or an approved
replacement antenna. Unauthorized antennas,
modifications, or attachments could damage the
radio product and may violate FCC regulations.
To avoid electromagnetic interference and/or
compatibility conflicts, turn off your radio product in
any facility where posted notices instruct you to do
so. Hospitals or health care facilities may be using
equipment that is sensitive to external RF energy.
DO NOT hold the antenna when the radio
product is “IN USE”. Holding the antenna affects
call quality and may cause the radio product to
operate at a higher power level than needed.
Approved Accessories
For a list of approved Motorola accessories call
1-800-453-0920, or visit our website at
www.motorola.com/iden.
Electromagnetic
Interference/Compatibility
Note: Nearly every electronic device is
susceptible to electromagnetic
interference (EMI) if inadequately
shielded, designed or otherwise
configured for electromagnetic
compatibility.
Aircraft
When instructed to do so, turn off your radio
product when on board an aircraft. Any use of a
radio product must be in accordance with
applicable regulations per airline crew instructions.
Medical Devices
Pacemakers
The Advanced Medical Technology Association
(AdvaMed) recommends that a minimum
separation of 6 inches (15 cm) be maintained
between a handheld wireless radio product and a
pacemaker. These recommendations are
consistent with those of the U.S. Food and Drug
Administration.
Persons with pacemakers should:
• ALWAYS keep the radio product more than 6
inches (15 cm) from their pacemaker when the
radio product is turned ON.
139
Safety and General Information
• Not carry the radio product in a breast pocket.
• Use the ear opposite the pacemaker to minimize
the potential for interference.
• Turn the radio product OFF immediately if you
have any reason to suspect that interference is
taking place.
Hearing Aids
Some digital wireless radio products may interfere
with some hearing aids. In the event of such
interference, you may want to consult your hearing
aid manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical device,
consult the manufacturer of your device to
determine if it is adequately shielded from RF
energy. Your physician may be able to assist you
in obtaining this information.
Use While Driving
Check the laws and regulations on the use of radio
products in the area where you drive. Always obey
them.
When using the radio product while driving, please:
• Give full attention to driving and to the road.
• Use hands-free operation, if available.
140
• Pull off the road and park before making or
answering a call if driving conditions so require.
Operational Warnings
For Vehicles with an Air
Bag
!
Do not place a portable radio product in the area
over the air bag or in the air bag deployment area.
Air bags inflate with great force. If a portable radio
is placed in the air bag deployment area and the air
bag inflates, the radio product may be propelled
with great force and cause serious injury to
occupants of the vehicle.
Potentially Explosive Atmospheres
Turn off your radio product prior to entering any
area with a potentially explosive atmosphere,
unless it is a radio product type especially qualified
for use in such areas as “Intrinsically Safe” (for
example, Factory Mutual, CSA, or UL approved).
Do not remove, install, or charge batteries in such
areas. Sparks in a potentially explosive
atmosphere can cause an explosion or fire
resulting in bodily injury or even death.
Operational Cautions
Note: The areas with potentially explosive
atmospheres referred to above include
fueling areas such as below decks on
boats, fuel or chemical transfer or
storage facilities, areas where the air
contains chemicals or particles, such
as grain, dust or metal powders, and
any other area where you would
normally be advised to turn off your
vehicle engine. Areas with potentially
explosive atmospheres are often but
not always posted.
Blasting Caps and Areas
To avoid possible interference with blasting
operations, turn off your radio product when you
are near electrical blasting caps, in a blasting area,
or in areas posted: “Turn off two-way radio”. Obey
all signs and instructions.
Operational Cautions
Batteries
!
All batteries can cause property damage and/or
bodily injury, such as burns if a conductive material
such as jewelry, keys, or beaded chains touches
exposed terminals. The conductive material may
complete an electrical circuit (short circuit) and
become quite hot. Exercise care in handling any
charged battery, particularly when placing it inside
a pocket, purse, or other container with metal
objects. To reduce the risk of injury, batteries
should not be exposed to fire, disassembled, or
crushed.
Cleaning and Drying Considerations
Using a leather carry case may help protect the
surfaces and help prevent liquids (e.g., rain) from
entering into the interior of the radio product. This
product is not water proof, and exposing the unit to
liquids may result in permanent damage to the unit.
If your radio product interior gets wet, then do not
try to accelerate drying with the use of an oven or a
dryer as this will damage the radio product and
void the warranty. Instead, do the following:
1 Immediately power off the radio product.
2 Remove Battery and SIM card (if so equipped)
from radio product.
3 Shake excess liquid from radio product.
4 Place the radio product and battery in an area
that is at room temperature and has good air
flow.
5 Let the radio product, battery, and SIM card dry
for 72 hours before reconnecting the battery
and/or powering on the radio product.
141
Safety and General Information
If the radio product does not work after following
the steps listed above, contact your dealer for
servicing information.
Clean the external surfaces of the radio product
with a damp cloth, using a mild solution of
dishwashing detergent and water. Some
household cleaners may contain chemicals that
could seriously damage the radio product. Avoid
the use of any petroleum-based solvent cleaners.
Also, avoid applying liquids directly on the radio
product.
Accessory Safety Information
Important: Save these accessory safety
instructions.
• Before using any battery or battery charger, read
all the instructions for and cautionary markings
on (1) the battery, (2) the battery charger, which
may include a separate wall-mounted power
supply or transformer, and (3) the radio product
using the battery.
142
• Do not expose any battery charger to water,
rain, or snow as they are designed for indoor or
in-vehicle use only.
!
Warning: To reduce the risk of injury,
charge only the rechargeable
batteries described in “Battery” on
page 3. Other types of batteries may
burst, causing personal injury and
damage.
• To reduce the risk of damage to the cord or plug,
pull by the plug rather than the cord when you
disconnect the battery charger from the power
source outlet.
• Do not operate any battery charger with a
damaged cord or plug — replace them
immediately.
• Battery chargers may become warm during
operation, but not hot. If it becomes hot to the
touch, unplug it from the power outlet
immediately and discontinue its use.
• Use of a non-recommended attachment to a
battery charger may result in a risk of fire,
electric shock, or injury to persons.
• Make sure the battery charger power cord is
located so that it will not be stepped on, tripped
over, or subjected to damage or stress.
Accessory Safety Information
• An extension cord should not be used with any
battery charger unless absolutely necessary.
Use of an improper extension cord could result
in a risk of fire and electric shock. If an extension
cord must be used, make sure that:
• The pins on the plug of the extension cord are
the same number, size, and shape as those
on the plug of the charger.
• The extension cord is properly wired and in
good electrical condition.
• The cord size is 18AWG for lengths up to 100
feet and 16AWG for lengths up to 150 feet.
• Do not operate any battery charger if it has
received a sharp blow, has been dropped, or
has been damaged in any way; take it to a
qualified service technician.
• Do not disassemble a battery charger; take it
to a qualified service technician when service
or repair is required. Incorrect reassembly
may result in a risk of electric shock or fire.
• Maximum ambient temperature around the
power supply or transformer of any battery
charger should not exceed 40°C (104°F).
• The output power from the power supply or
transformer must not exceed the rating given
on the Desktop Dual-Pocket Charger.
• The disconnection from the line voltage is
made by unplugging the power supply from
the AC receptacle.
• To reduce risk of electric shock, unplug any
battery charger from the outlet before
attempting any maintenance or cleaning.
For optimum charging performance, turn off the
radio product while charging it in any battery
charger.
143
MOTOROLA LIMITED
WARRANTY
Note: FOR IDEN SUBSCRIBER PRODUCTS,
ACCESSORIES AND SOFTWARE
PURCHASED IN THE UNITED STATES
OR CANADA
PRODUCTS
COVERED
LENGTH OF
COVERAGE
Products as defined
above.
One (1) year from the
date of purchase by the
first consumer
purchaser of the
product.
Accessories as
defined above.
One (1) year from the
date of purchase by the
first consumer
purchaser of the
product.
What Does this Warranty Cover?
Subject to the exclusions contained below,
Motorola, Inc. warrants its Motorola iDEN Digital
Mobile and Portable Handsets ("Products"),
Motorola-branded or certified accessories sold for
use with these Products ("Accessories") and
Motorola software contained on CD-Roms or other
tangible media and sold for use with these
Products ("Software") to be free from defects in
materials and workmanship under normal
consumer usage for the period(s) outlined below.
This limited warranty is a consumer's exclusive
remedy, and applies as follows to new
Products, Accessories and Software
purchased by consumers in the United States
or Canada, which are accompanied by this
written warranty:
144
Products or
The balance of the
Accessories that are original warranty or
Repaired or Replaced. for ninety (90) days
from the date returned
to the consumer,
whichever is longer.
Software as defined
Ninety (90) days from
above. Applies only to the date of purchase.
physical defects in the
media that embodies
the copy of the software
(e.g. CD-ROM, or
floppy disk).
What is not covered? (Exclusions)
Normal Wear and Tear. Periodic maintenance,
repair and replacement of parts due to normal wear
and tear are excluded from coverage.
Ornamental Decorations. Ornamental
decorations such as emblems, graphics,
rhinestones, jewels, gemstones and their settings,
and other decorative elements, are excluded from
coverage.
Batteries. Only batteries whose fully charged
capacity falls below 80% of their rated capacity and
batteries that leak are covered by this limited
warranty.
Abuse & Misuse. Defects or damage that result
from: (a) improper operation, storage, misuse or
abuse, accident or neglect, such as physical
damage (cracks, scratches, etc.) to the surface of
the product resulting from misuse; (b) contact with
liquid, water, rain, extreme humidity or heavy
perspiration, sand, dirt or the like, extreme heat, or
food; (c) use of the Products or Accessories for
commercial purposes or subjecting the Product or
Accessory to abnormal usage or conditions; or (d)
other acts which are not the fault of Motorola, are
excluded from coverage.
Use of Non-Motorola Products and
Accessories. Defects or damage that result from
the use of Non-Motorola branded or certified
Products, Accessories, Software or other
peripheral equipment are excluded from coverage.
Unauthorized Service or Modification. Defects
or damages resulting from service, testing,
adjustment, installation, maintenance, alteration,
including without limitation, software changes, or
modification in any way by someone other than
Motorola, or its authorized service centers, are
excluded from coverage.
Altered Products. Products or Accessories with
(a) serial numbers or date tags that have been
removed, altered or obliterated; (b) broken seals or
that show evidence of tampering; (c) mismatched
board serial numbers; or (d) nonconforming or
non-Motorola housings, antennas, or parts, are
excluded from coverage.
Communication Services. Defects, damages, or
the failure of Products, Accessories or Software
due to any communication service or signal you
may subscribe to or use with the Products,
Accessories or Software is excluded from
coverage.
145
MOTOROLA LIMITED WARRANTY
Software Embodied in Physical Media. No
warranty is made that the software will meet your
requirements or will work in combination with any
hardware or software applications provided by third
parties, that the operation of the software products
will be uninterrupted or error free, or that all defects
in the software products will be corrected.
How to Obtain Warranty Service or Other
Information? To obtain service or information,
please call:
Software NOT Embodied in Physical Media.
Software that is not embodied in physical media
(e.g. software that is downloaded from the
internet), is provided "as is" and without warranty.
Or visit us online at
http://www.motorola.com/iden/support
Who is covered? This warranty extends only to
the first consumer purchaser, and is not
transferable.
What will Motorola Do? Motorola, at its option,
will at no charge repair, replace or refund the
purchase price of any Products, Accessories or
Software that does not conform to this warranty.
We may use functionally equivalent
reconditioned/refurbished/pre-owned or new
Products, Accessories or parts. No data, software
or applications added to your Product, Accessory
or Software, including but not limited to personal
contacts, games and ringer tones, will be
reinstalled. To avoid losing such data, software
and applications please create a back up prior to
requesting service.
146
Motorola iDEN Customer Services
1-800-453-0920 or 954-723-4910
TTY-877-483-2840
You will receive instructions on how to ship the
Products, Accessories or Software, at your
expense, to a Motorola Authorized Repair Center.
To obtain service, you must include: (a) a copy of
your receipt, bill of sale or other comparable proof
of purchase; (b) a written description of the
problem; (c) the name of your service provider, if
applicable; (d) the name and location of the
installation facility (if applicable) and, most
importantly; (e) your address and telephone
number.
What Other Limitations Are There? ANY
IMPLIED WARRANTIES, INCLUDING WITHOUT
LIMITATION THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED
TO THE DURATION OF THIS LIMITED
WARRANTY, OTHERWISE THE REPAIR,
REPLACEMENT, OR REFUND AS PROVIDED
UNDER THIS EXPRESS LIMITED WARRANTY IS
THE EXCLUSIVE REMEDY OF THE
CONSUMER, AND IS PROVIDED IN LIEU OF
ALL OTHER WARRANTIES, EXPRESS OF
IMPLIED. IN NO EVENT SHALL MOTOROLA BE
LIABLE, WHETHER IN CONTRACT OR TORT
(INCLUDING NEGLIGENCE) FOR DAMAGES IN
EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT, ACCESSORY OR SOFTWARE, OR
FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND, OR
LOSS OF REVENUE OR PROFITS, LOSS OF
BUSINESS, LOSS OF INFORMATION OR DATA,
SOFTWARE OR APPLICATIONS OR OTHER
FINANCIAL LOSS ARISING OUT OF OR IN
CONNECTION WITH THE ABILITY OR INABILITY
TO USE THE PRODUCTS, ACCESSORIES OR
SOFTWARE TO THE FULL EXTENT THESE
DAMAGES MAY BE DISCLAIMED BY LAW.
Laws in the United States and other countries
preserve for Motorola certain exclusive rights for
copyrighted Motorola software such as the
exclusive rights to reproduce and distribute copies
of the Motorola software. Motorola software may
only be copied into, used in, and redistributed with,
the Products associated with such Motorola
software. No other use, including without limitation
disassembly of such Motorola software or exercise
of the exclusive rights reserved for Motorola, is
permitted.
Some states and jurisdictions do not allow the
limitation or exclusion of incidental or
consequential damages, or limitation on the
length of an implied warranty, so the above
limitations or exclusions may not apply to you.
This warranty gives you specific legal rights,
and you may also have other rights that vary
from state to state or from one jurisdiction to
another.
147
Limited Warranty Motorola Communication Products (International)
Limited Warranty
Motorola
Communication
Products (International)
Note: This Warranty applies in Singapore and
the Philippines.
I. What This Warranty Covers
and For How Long:
MOTOROLA warrants the MOTOROLA
manufactured iDEN Communication Products
listed below (“Product”) against defects in material
and workmanship under normal use and service
for a period of time from the date of purchase as
scheduled below:
iDEN Subscriber Digital Mobile and One (1) Year
Portable Units
Product Accessories
One (1) Year
(manufactured by or under license
from MOTOROLA)
Batteries
148
One (1) Year
Rechargeable Batteries will be replaced during the
applicable warranty period if:
a. the battery capacity falls below 80% of rated
capacity, or
b. the battery develops leakage.
MOTOROLA, at its option, will at no charge either
repair the Product (with new or reconditioned
parts), replace it (with a new or reconditioned
Product), or refund the purchase price of the
Product during the warranty period provided it is
returned in accordance with the terms of this
warranty. Replaced parts or boards are warranted
for the balance of the original applicable warranty
period. All replaced parts of Product shall become
the property of MOTOROLA.
This express limited warranty is extended by
MOTOROLA to the original end user purchaser
only and is not assignable or transferable to any
other party. This is the complete warranty for the
Product manufactured by MOTOROLA.
MOTOROLA assumes no obligations or liability for
additions or modifications to this warranty unless
made in writing and signed by an officer of
MOTOROLA. Unless made in a separate
agreement between MOTOROLA and the original
end user purchaser, MOTOROLA does not warrant
the installation, maintenance or service of the
Product.
MOTOROLA cannot be responsible in any way for
any ancillary equipment not furnished by
MOTOROLA which is attached to or used in
connection with the Product, or for operation of the
Product with any ancillary equipment, and all such
equipment if expressly excluded from this
warranty. Because each system which may use
the Product is unique, MOTOROLA disclaims
liability for range, coverage, or operation of the
system as a whole, or any portion of the system not
produced by MOTOROLA, under this warranty.
TIME, INCONVENIENCE, COMMERCIAL LOSS,
LOST PROFITS OR SAVINGS OR OTHER
INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES ARISING OUT OF THE USE OR
INABILITY TO USE SUCH PRODUCT, TO THE
FULL EXTENT SUCH MAY BE DISCLAIMED BY
LAW.
II. General Provisions:
You must provide proof of purchase (bearing the
date of purchase and Product item serial number)
in order to receive warranty service and, also,
deliver or send the Product item, transportation
and insurance prepaid, to an authorized warranty
service location. Warranty service will be provided
by MOTOROLA through one of its authorized
warranty service locations. If you first contact the
company which sold you the Product (e.g., dealer
or communication service provider), it can facilitate
your obtaining warranty service.
This warranty sets forth the full extent of
MOTOROLA’S responsibilities regarding the
Product, Repair, replacement or refund of the
purchase price, at MOTOROLA’S options, is the
exclusive remedy. THIS WARRANTY IS GIVEN
IN LIEU OF ALL OTHER EXPRESS
WARRANTIES. IMPLIED WARRANTIES,
INLCUDING WITHOUT LIMITATION, IMPLIED
WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO THE DURATION OF THIS LIMITED
WARRANTY TO THE FULL EXTENT SUCH MAY
BE DISCLAIMED BY LAW. IN NO EVENT SHALL
MOTOROLA BE LIABLE FOR DAMAGES IN
EXCESS OF THE PURCHASE PRICE OF THE
PRODUCT, FOR ANY LOSS OF USE, LOSS OF
III. How to Get Warranty
Service:
IV. What This Warranty Does
Not Cover:
a. Defects or damage resulting from use of the
Product in other than its normal and customary
manner.
149
Limited Warranty Motorola Communication Products (International)
b. Defects or damage from misuse, accident,
water, or neglect.
c. Defects or damage from improper testing,
operation, maintenance, installation, alteration,
modification, or adjustment.
d. Breakage or damage to antennas unless
caused directly by defects in material
workmanship.
e. A Product subjected to unauthorized Product
modifications, disassemblies or repairs
(including, without limitation, the audition to the
Product of non-MOTOROLA supplied
equipment).
f. Product which has had the serial number
removed or made illegible.
g. Rechargeable batteries if:
1.Any of the seals on the battery enclosure of
cells are broken or show evidence of
tampering.
2.The damage or defect is caused by
charging or using the battery in equipment
or service other than the Product for which it
is specified.
h. Freight costs to the repair depot.
i. A Product which, due to illegal or unauthorized
alteration of the software/firmware in the
Product, does not function in accordance with
150
MOTOROLA’S published specifications or the
local type acceptance labeling in effect for the
Product at the time the Product was initially
distributed from MOTOROLA.
j. Scratches or other cosmetic damage to
Product surfaces that does not effect the
operation of the Product.
k. Normal and customary wear and tear.
l. Exclusion for defects or damage arising from
use of the products in connection with
non-MOTOROLA equipment.
VI. Patent and Software
Provisions:
MOTOROLA will defend, at its own expense, any
suit brought against the end user purchaser to the
extent that it is based on a claim that the Product or
parts infringe a patent, and Motorola will pay those
costs and damages finally awarded against the
end user purchaser in any such suit which are
attributable to any such claim, but such defense
and payments are conditioned on the following:
a. That MOTOROLA will be notified promptly in
writing by such purchaser of any notice of such
claim;
b. That MOTOROLA will have sole control of the
defense of such suit and all negotiations for its
settlement or compromise; and
c. Should the Product or parts become, or in
MOTOROLA’S opinion be likely to become, the
subject of a claim of infringement of a patent,
that such purchaser will permit MOTOROLA, at
its option and expense, either to procure for
such purchaser the right to continue using the
Product or parts or to replace or modify the
same so that it becomes non-infringing or to
grant such purchaser a credit for the Product or
parts as depreciated and accept its return. The
depreciation will be an equal amount per year
over the lifetime of the Product or parts as
established by MOTOROLA.
MOTOROLA will have no liability with respect to
any claim of patent infringement which is based
upon the combination of the Product or parts
furnished hereunder with software, apparatus or
devices not furnished by MOTOROLA, nor will
MOTOROLA have any liability for the use of
ancillary equipment or software not furnished by
MOTOROLA which is attached to or sued in
connection with the Product or any parts thereof. In
no event shall MOTOROLA be liable for any
incidental, special or consequential damages
arising from any claim of patent infringement or
alleged infringement.
Laws in the United States and other countries
preserve for MOTOROLA certain exclusive rights
for copyrighted MOTOROLA software, such as the
exclusive rights to reproduce in copies and
distribute copies of such MOTOROLA software.
MOTOROLA software may be used in only the
Product in which the software was originally
embodied and such software in such Product may
not be replaced, copied, distributed, modified in
any way, or used to produce any derivative thereof.
No other use including, without limitation,
alteration, modification, reproduction, distribution,
or reverse engineering of such MOTOROLA
software or exercise or rights in such MOTOROLA
software is permitted. No license is granted by
implication, estoppel or otherwise under
MOTOROLA patent rights or copyrights.
151
Patent and Trademark
Information
MOTOROLA, the Stylized M Logo and all other
trademarks indicated as such herein are
trademarks of Motorola, Inc. ® Reg. U.S. Pat. &
Tm. Off. © 2005 Motorola, Inc. All rights reserved.
Microsoft and Microsoft Internet Explorer are
registered trademarks of Microsoft Corporation.
T9 is a trademark owned by Tegic
Communications.
T9® Text Input Patent and Trademark Information
This product is covered by U.S. Pat. 5,818,437,
U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other
patents pending.
Java and all other Java-based marks are
trademarks or registered trademarks of Sun
Microsystems, Inc. in the U.S. and other countries.
All other product names or services mentioned in
this manual are the property of their respective
trademark owners.
152
Software Copyright Notice
The Motorola products described in this manual
may include copyrighted Motorola and third party
software stored in semiconductor memories or
other media. Laws in the United States and other
countries preserve for Motorola and third party
software providers certain exclusive rights for
copyrighted software, such as the exclusive rights
to distribute or reproduce the copyrighted software.
Accordingly, any copyrighted software contained in
the Motorola products may not be modified,
reverse-engineered, distributed, or reproduced in
any manner to the extent allowed by law.
Furthermore, the purchase of the Motorola
products shall not be deemed to grant either
directly or by implication, estoppel, or otherwise,
any license under the copyrights, patents, or patent
applications of Motorola or any third party software
provider, except for the normal, non-exclusive,
royalty-free license to use that arises by operation
of law in the sale of a product.
Index
Numerics
2-way radio 122
see also Private calls, group
calls, SDG calls, and call
alerts
3-way calling 39
A
Accessories 16
safety 142
Airplane mode 6, 11, 120
power button 6, 120
settings 124
turning on and off 120
Antenna 15
Audio recordings 71
playing 71
B
Backlight 119, 120
Java applications 119
Battery
care 5
charging 3, 4
door 3
inserting 3
safety 141
Baud rate 124
Bluetooth 93
access settings 93
access settings, editing 98
accessing 94
Airplane mode 120
bonds 93, 95
connections, making 95
deleting received items 100
device details 97
device names, editing 98
devices, deleting 98
devices, disconnecting 97
devices, discovering 95, 97
discoverable mode 95
during an active call 97
headset 132
icons 10
PINs 96
reassigning a device name
94
receiving items 99
sending Contacts 98
sending Datebook events 99
sending pictures 99
setting device details 97
setting voice dialing 94
setting your phone 93
status icons 11
storing received items 100
transfers, canceling 99
turning on or off 94
viewing received items 100
C
Call alerts 21
deleting 22
queue 21
receiving 21
responding 21, 22
sending 21
sorting 22
viewing 22
Call filtering 128
Call forwarding 36
all calls 36
153
Index
missed calls 37
off 36
Call Timers 41
Call Waiting 38
off 38
Calls
3-way 39
answering automatically 121
answering with any key 121
emergency 20
ending 17, 18
entering number 18
from memo 53
from recent calls 25
group, see Group calls
international 40
making 17
on hold 39
phone calls 17
Private calls 17, 40, 122
receiving 17
redialing 19, 121
remote PTT 132
SDG, see SDG calls
154
Speed Dial 19
TTY, see TTY calls
Turbo Dial 19
voice name 18
Circuit data 43
Clock 121
Contact information
receiving 24, 81
sending 80
Contacts 27
accessing 28
capacity 33
creating entries 28
deleting 33
editing entries 30
icons 27
iDEN Phonebook Manager
35
international numbers 34
pictures 27, 28, 29, 32, 71
ring tones 27, 28, 29
searching 32
showing all entries 32
showing only Private IDs 32
showing only SDG lists 32
showing only Talkgroups 32
SIM card 27
storing from idle screen 30
storing from Memo 53
storing from recent calls 25
storing from the idle screen
30
type 27
voice name 30
with non-i605 phones 35
D
Data transfers 43
Datebook 111
copying events 114
creating events 112
deleting events 114
editing events 114
profiles 114
reminders 115
setting up 116
viewing 111
Digital rights management, see
DRM
Display
backlight 119, 120
contrast 119, 121
options 8
screen 8
Sleep mode 5, 121
Drafts 66
see also MOSMS messages,
drafts
DRM
count-based usage 74
default location 70
definition 74
deleting items 76
expired items 76
gifting 70, 75
installing items 74
Java applications 88
managing items 75
media center 70
renewing license 76
ring tones 56
sharing items 74
status icons 70, 74
Tell-A-Friend 70, 75
time-based usage 74
viewing license information
75
DTMF dialing 95, 121
GPS, see GPS Enabled
Group calls 46, 122
making 47
off 47
receiving 47
E
H
Email 27, 29, 43
Emergency calls 20
End key 1
Handset, see phone
Headset 132
Holster 5
F
I
Faxes
receiving 43
sending 43
Icons
Bluetooth 10, 11
Contacts 27
DRM 70, 74
SDG calls 51
status 10
text entry 58
voice records 84
iDEN Phonebook Manager 35
Idle screen 8
creating MOSMS messages
65
storing to Contacts 30
International numbers 40
G
GPS Enabled 101
almanac data 106
best results 104
emergency calls 20, 102
map software 108
privacy options 107
security 107
viewing location 103
GPS PIN 123
155
Index
calling 40
storing 34
J
Java applications 87
backlight 119
deleting 88
DRM 88
memory 89
K
Keypad 1
locking 123
L
Language 121
Lists, see menus
M
Media center 68
audio recordings 71
deleting 72
DRM items 70
forward locked 69
locking 72
memory 73
pictures 70
156
renaming 72
viewing 68
Memo 53
calling from 53
creating 53
editing 53
storing to Contacts 53
viewing 53
Memory
Java applications 89
media center 73
MOSMS messages 67
ring tones 56
voice records 86
Menu key 1, 9
Menus 8
context-sensitive 1, 9
main menu 9
SDG list 48
Message center 60, 62
see also messages
MOSMS messages 64
Message notifications 60
setting options 60
Messages 60
see also voice mail, MOSMS
messages, and SMS
messages
receiving 60
Modem
data transfer modes 43
using your phone 42
with a data cable 42
with Bluetooth 43
MOSMS messages 63
creating 64
deleting 66, 67
drafts 66
memory 67
message center 64
quick notes 65
receiving 63
sending 64
sent messages 66
setting up 63
sorting 67
Mute 20
My Info 82
editing 82
receiving 23, 81
sending 80, 83
viewing 82
N
Navigation key 1
O
OK key 1, 9
One Touch PTT 40
Over-the-air programming 7
P
Packet data 43
Passwords 123
Patent information 152
Pauses
dialing 40
storing 33
Phone 1, 8
active line 121
locking 123
modem 42
off 6
on 6
only 124
setting up 2
Pictures 70
Contacts 27, 28, 29, 32, 71
inserting in messages 71
receiving 79
recent calls 24
Send via PTT 78
sending 78
Profiles 125
call filtering 128
changing settings 125
creating 127
Datebook 114
deleting 127
editing 127
switching 125
temporary 126
viewing 125
Programming, over-the-air 7
PUK code 13
Q
Quick notes 65
see also MOSMS messages,
quick notes
R
Radio frequency 136
Recent calls 23, 25
call alerts 23
contact information 24
creating MOSMS messages
65
deleting 25
display time 124
pictures 24
storing to Contacts 25
viewing 24
Redialing 19, 121
Ring tones 54
deleting 56
downloading 56
DRM 56
in Contacts 27, 28, 29, 55
memory 56
off 54
setting 54
vibrate 54
viewing assigned 55
Ringer 117
157
Index
see also Ring tones
off 117
S
Safety 136
accessory 142
battery 141
driving 161
electromagnetic interference
139
medical devices 139
radio frequency 136
SDG calls
icons 51
lists, adding numbers 48
lists, creating 48
lists, deleting 49
lists, removing members 49
lists, sending 51
lists, storing faster 50
making 50
receiving 50
starting 50
status icons 10
Security 123
158
Selective Dynamic Group Calls,
see SDG calls
Send key 1
Send via PTT 78
contact information 80
My Info 80
pictures 78
pictures, receiving 78
setting for pictures 79
Service provider 16
Service, activating 6
Settings 120
resetting 124
Shortcuts
creating 130
deleting 131
editing 131
using 130
SIM card 2, 12, 13
Contacts 27
inserting 14
removing 15
with non-i605 phones 35
SIM PIN 12, 123
changing 12
default 12
entering 12
requirement 13
unblocking 13
SMS messages 60, 63
also see MOSMS messages
63
Speakerphone 19
Speed Dial 19, 28, 30
Status light 121
Status messages 133
T
T9 Text Input, see text entry
Talkgroups 46, 47, 122
joining 47
Text display area 8
Text entry 58
database 58, 59
icons 58
mode 58
Word mode 58
Themes 117
Trademark information 152
TTY calls 43
baud rate 44
making 43
mode 44
on 44
Turbo Dial 19
V
W
Waits
dialing 40
storing 33
Wallpaper 71, 118
Warranty 148
Word mode 58
Voice mail 60, 62
receiving 62
sending calls to 17, 62
setting up 37, 62
Voice name 18, 28
creating 30
Voice records 84
creating 84
deleting 86
icons 84
labelling 85
locking 85
memory 86
playing 85
viewing 84
Volume, setting 117, 122
159
Driving Safety Tips
“Safety is your most important call!”
Your Motorola wireless telephone gives you the
powerful ability to communicate by voice — almost
anywhere, anytime, wherever wireless phone
service is available and safe conditions allow. But
an important responsibility accompanies that
benefits of wireless phones, one that every user
must uphold.
When driving a car, driving is your first
responsibility. If you find it necessary to use your
wireless phone while behind the wheel of a car,
practice good common sense and remember the
following tips:
• Get to know your Motorola wireless phone and
its features such as speed dial and redial. If
available, these features help you to place your
call without taking your attention off the road.
• When available, use a hands-free device. If
possible, add an additional layer of convenience
to your wireless phone with one of the many
Motorola Original hands-free accessories
available today.
160
• Position your wireless phone within easy reach.
Be able to access your wireless phone without
removing your eyes from the road. If you receive
an incoming call at an inconvenient time, if
possible, let your voice mail answer it for you.
• Let the person you are speaking with know you
are driving; if necessary, suspend the call in
heavy traffic or hazardous weather conditions.
Rain, sleet, snow, ice, and even heavy traffic can
be hazardous.
• If you receive an incoming call at an
inconvenient time do not take notes or look up
phone numbers while driving. Jotting down a “to
do” list or going through your address book
takes attention away from your primary
responsibility — driving safely.
• Dial sensibly and assess the traffic; if possible,
place calls when you are not moving or before
pulling into traffic. Try to plan calls when your car
will be stationary. If you need to make a call
while moving, dial only a few numbers, check
the road and your mirrors, then continue.
• Do not engage in stressful or emotional
conversations that may be distracting. Make
people you are talking with aware you are
driving and suspend conversations which have
the potential to divert your attention away from
the road.
Driving Safety Tips
• Your phone can perform many other functions
besides allowing you to make and receive calls.
Do not let these features distract you from
driving. Use them only when it is safe to do so.
• Use your wireless phone to call for help. Dial
9-1-1 or other local emergency number in the
case of fire, traffic accident or medical
emergencies.
• Use your wireless phone to help others in
emergencies. If you see an auto accident, crime
in progress or other serious emergency where
lives are in danger, call 9-1-1 or other local
emergency number, as you would want others to
do for you.
• Call roadside assistance or a special
non-emergency wireless assistance number
when necessary. If you see a broken-down
vehicle posing no serious hazard, a broken
traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be
stolen, call roadside assistance or other special
non-emergency wireless number.
161