Siemens Nitro BTE User guide

Nitro BTE
User Guide
Content
Content
Your Nitro hearing instrument
4
Intended use
5
General notes on safety
6
Handling batteries
9
Inserting and removing your hearing instrument
12
Turning your hearing instrument on and off
13
Changing the hearing program
15
Changing the volume
16
Audio input
17
Telephoning
19
e2e wireless 2.0
21
Maintenance and care
22
Accessories
23
Troubleshooting tips
25
Technical information
26
Disposal information
28
Your hearing instrument configuration
29
2
Introduction
Introduction
EN
Dear customer,
Congratulations! You have selected a hearing instrument
from Siemens. This hearing instrument was individually
designed for your hearing impairment and is fitted specially to your personal hearing profile.
These instructions, together with guidance from your
Hearing Care Professional, will help you understand how
your new hearing instrument works.
If you have further questions, please contact your Hearing
Care Professional.
3
Your Nitro hearing instrument
Your Nitro hearing instrument
Nitro SP
(battery type: 675)
① Earhook
② Microphone openings
③ Volume control with
on/off function
④ LED
⑤ Cover for programming socket
4
⑥ Program button with on/off
function
⑦ Audio input
⑧ Battery compartment
⑨ Typeplates
red = right hearing instrument
blue = left hearing instrument
Intended use
Intended use
EN
Hearing instruments are intended to improve the hearing
of hearing impaired persons. Diagnosis and prescription
of a hearing instrument must be performed by hearing
health specialists, e.g. ENT doctors, audiologists or
acousticians.
Read and follow the instructions of this user guide to
avoid injuries and to protect the hearing instruments from
damage.
Symbols:
Be aware of information marked with the warning symbol
WARNING, CAUTION or NOTICE!
WARNING points out a situation that could
lead to serious injuries, CAUTION indicates a
situation that could lead to minor and moderate
injuries.
NOTICE
NOTICE indicates possible property damage.
Advice and tips on how to handle your device
better.
Instruction. Indicates that something has to be
done.
Indicates an option that not every hearing
instrument has. Ask your Hearing Care Professional to check off the relevant information.
5
General notes on safety
General notes on safety
NOTICE
Your hearing instruments are sensitive to extreme
heat, high humidity, strong magnetic fields
(> 0.1T), X-rays and mechanical stress.
Do not expose your hearing instruments to
extreme temperature or high humidity.
Do not leave them in direct sunlight.
Do not wear them in the shower or when you
apply make-up, perfume, aftershave, hairspray
or suntan lotion.
Do not wear your hearing instruments when
you are exposed to short-waves, a strong magnetic field, a high frequency field or X-rays.
Do not place your hearing instruments in a
microwave oven.
6
General notes on safety
EN
WARNING
Choking hazard posed by small parts.
If infants, small children or mentally disabled
persons need to wear hearing instruments
ensure adequate supervision.
Check the integrity of the hearing instruments
regularly.
Ensure that your child does not detach the hearing instrument from the earmold.
Consult your Hearing Care Professional if the
housing is deformed.
Keep the battery compartment locked. Verify
the proper function of the locking mechanism.
Keep batteries and accessories out of children's
reach.
If swallowed consult a physician or a hospital
immediately.
In some countries restrictions for the usage of
wireless equipment exist.
Refer to local authorities for further information.
7
General notes on safety
NOTICE
Batteries contain harmful substances that pollute
the environment.
Do not throw used batteries into household
trash.
Dispose batteries according to national regulations or return them to your Hearing Care
Professional.
NOTICE
Leaking batteries damage the hearing instruments.
Turn the hearing instruments off when not in
use to preserve the battery.
Remove batteries when the instruments are not
in use for a prolonged period of time.
WARNING
Hazard of explosion in explosive atmospheres!
Do not use your hearing instruments in areas
where there is a danger of explosions
(e.g. mining area).
8
Handling batteries
Handling batteries
EN
Always use the right size batteries.
Remove the tab on your batteries
only when you are ready to use
them.
The positive (+) side of the batter-
original size
ies is always the smooth side.
Always keep spare batteries with
you.
Low battery indicator
Your Hearing Care Professional can activate an acoustic
signal to inform you when the battery is nearly empty. If
you hear an acoustic signal or experience low amplification power, replace the battery.
9
Handling batteries
Inserting the battery
Open the battery compartment completely using your fingernail as shown in
the illustration.
Insert the proper size battery.
Make sure that the "+" symbol on the
battery points up as shown in the
picture.
Close the battery compartment.
Do not force the door shut. If it does not
close easily, check to see if the battery
was inserted properly.
When the battery door is completely closed, your hearing
instrument is ready for use.
10
Handling batteries
EN
Removing the battery
Open the battery compartment completely.
Normally the battery drops out when the
compartment is completely open.
If the battery does not come out, lightly
tap the instrument or use the magnet
stick available as accessory to remove the battery.
11
Inserting and removing your hearing instrument
Inserting and removing your
hearing instrument
Ask your Hearing Care Professional to apply
colored typeplates for side recognition. If the
typeplate of your hearing instrument is in red, the
hearing instrument is intended for the right ear. If
the typeplate is in blue, the hearing instrument is
for the left ear.
Inserting your hearing instrument
Turn your hearing instrument off.
Hold the earmold between your
thumb and index finger and insert it
carefully into the ear canal.
You may find it helpful to pull your
ear slightly upward or to the back.
Place your hearing instrument behind your ear.
Turn your hearing instrument on.
Removing your hearing instrument
Hold the earmold between your
thumb and index finger and
carefully pull it out.
You may find it helpful to lightly
push your ear from the back.
12
Inserting and removing your hearing instrument
Turning your hearing instrument
on and off
Via battery compartment
Close the battery compartment completely to turn the
hearing instrument on.
Open the battery compartment downward to the first
stop to turn the hearing instrument off.
Via program button
Press the program button for about 2 seconds to turn
the hearing instrument to stand-by.
Press the program button for about 2 seconds to turn
the hearing instrument back on.
Via volume control
Rotate the volume control upwards to turn the hearing
instrument on.
Rotate the volume control completely down to turn the
hearing instrument off.
Via remote control
Refer to the remote control user guide.
Power-on delay
Your hearing instrument is equipped with a "power-on delay" feature which can be activated by your Hearing Care
Professional. This allows you to turn the hearing instrument on with an automatic delay of 6/12/18 seconds, so
that you may insert the hearing instrument into your ear
without experiencing unpleasant feedback (whistling).
13
EN
Inserting and removing your hearing instrument
Checking the hearing instrument's performance
The LED shows whether the hearing instruments work
properly.
The LED shines constantly.
The hearing instruments are switched on and
sufficient battery power is available.
The LED ist off.
The hearing instruments are switched off or
the battery must be replaced.
To check if sufficient battery power is available
use a battery tester or place the switched-on
hearing instruments in your closed hand and
listen if it responds with feedback whistling.
Check the instrument sound regularly with a
stethoclip, particularly if your child is not able to
express verbally if something is wrong with the
hearing instruments.
14
Changing the hearing program
Changing the hearing program
EN
Via program button
Your hearing instruments offer up to
5 hearing programs for specific listening
environments.
Each time you press the program button,
your hearing instruments switch to the next
program, confirming each change with an
acoustic signal.
Example
Turn your hearing instruments on.
It is automatically in program 1. You want to change to
program 2.
Press the program button once.
You hear the acoustic signal for program 2.
You are now in program 2.
Press the program button shortly to change the
program. Pressing the program button too long
will switch off the hearing instruments.
Via remote control
Refer to the remote control user guide.
Your Hearing Care Professional can write down the personal program configuration of your hearing instrument.
See the table on last page.
Your Hearing Care Professional can activate or deactivate
the acoustic signals in your hearing instruments.
15
Changing the volume
Changing the volume
The volume of your hearing instruments is controlled
automatically and there is no need to manually adjust it.
Should you prefer manual volume control, your Hearing
Care Professional can program the hearing instrument for
manual adjustment.
Via volume control
Rotate the volume
louder
control with your index
finger to select the desired listening volume.
softer
For easier handling your Hearing Care Professional may
have activated the volume control only on one side.
With e2e wireless the second hearing instrument is automatically adjusted.
Via remote control
Refer to the remote control user guide.
When using a remote control the volume control is
deactivated.
16
Audio input
Audio input
EN
Your hearing instrument is equipped with an audio input.
Together with an audio shoe it enables the connection
between the hearing instrument and e. g. an FM system,
mp3 player, television or an infrared device. This way the
sound is coming directly from the sound source. That can
be useful for adults in difficult listening situations and for
children in classrooms.
NOTICE
Use only the M5 audio shoe (labelled inside the
audio shoe). They are designed exclusively for
your hearing instruments.
With the audio shoe M5 attached, the battery compartment switch is disabled and the hearing system can only
be switched off via program button or remote control.
WARNING
Risk of injuries caused by electric shock!
Connect audio input only to a device conforming to IEC 60065 (IEC-Norm for audio, video and
other electronic devices).
17
Audio input
Attaching the audio shoe
Open the battery compartment ①.
Open the audio shoe cover ②.
Close the battery compartment.
Align the contacts of the audio shoe
with the contacts of the hearing
instrument.
Slide the audio shoe over the
hearing instrument until it
snaps into the end position.
Your Hearing Care Professional
can program your hearing
instruments so that they switch
automatically to the audio shoe
program if an audio shoe has
been attached.
Removing the audio shoe
Slide the audio shoe in the opposite direction to that for attachment and take it off.
Close the audio shoe cover.
18
Telephoning
Telephoning
EN
Hold a telephone near your hearing instrument (*).
The hearing instrument automatically switches to the
telephone program.
Move the telephone away from your hearing instrument.
The hearing instrument switches back to the previously
used program.
You can also select the telephone program manually by
using the program button.
When operating the hearing instrument in telecoil
mode, the wireless function may cause a pulsing
noise. This is due to the pick-up of the transmission signal. When your hearing instrument is in
telecoil mode please use the remote control only
with a distance greater than 10 cm (4 inches).
(*) AutoPhone magnet accessory
Not all telephones produce a magnetic field strong
enough to activate the AutoPhone function. In this case,
use the AutoPhone magnet, available as an accessory,
and attach it to the telephone receiver to activate the
Auto-Phone function.
19
Telephoning
See the AutoPhone magnet user guide for
instructions on how to position the magnet.
Use only the Siemens magnet. Ask your Hearing
Care Professional for this accessory.
WARNING
Magnets may interfere with the operation of life
supporting systems (e. g. pacemakers, magnetic
valves).
Use a magnet only if not in doubt about the
safe distance. The safe distance between pacemaker and magnet should be at least 10 cm
(4 inches).
NOTICE
Magnets can disturb electrical devices and delete
stored data.
Keep magnets away from computers, color
monitors, television sets, floppy discs, videoand audio discs and other electronic equipment/
devices.
20
e2e wireless 2.0
e2e wireless 2.0
EN
Your hearing instruments are equipped with e2e
(ear-to-ear) wireless 2.0 technology.
The performance of the wireless function may be
affected by electromagnetic interference – e.g.
from a computer monitor or fluorescent lamp
system.
Move away from the source of interference if
you experience difficulty.
Advantages of the wireless functionality:
■ Automatically adjusts both hearing instruments simultaneously to different listening situations.
■ Allows use of accessories, e.g. a remote control.
■ Provides synchronization of the settings in the system.
If you change the volume or program on one hearing
instrument, the other hearing instrument is automatically adjusted.
Your Hearing Care Professional can activate or deactivate
the wireless functionality of your hearing instruments.
21
Maintenance and care
Maintenance and care
Your hearing instruments are highly sensitive systems.
Proper care and handling will ensure the best possible
performance.
Clean instruments regularly to prevent damage to the
hearing instruments and to avoid health problems.
NOTICE
Do not put your hearing instruments
in water.
Clean your hearing instruments with a soft, dry tissue,
as necessary.
Place your hearing instruments in a "dry aid kit" with a
special moisture-attracting capsule overnight.
Ask your Hearing Care Professional for special care sets
and further information on how to keep your hearing
instruments in good condition.
22
Accessories
Accessories
EN
SafeFit Kit
Your Hearing Care Professional can convert this hearing
instrument to be child proof.
The child proof version of the hearing instrument:
■ does not have a program button.
■ has a typeplate that can not be detached by a child.
■ has a battery compartment lock that can only be
opened with a special tool.
All these precautions help to prevent the child from detaching and swallowing small parts.
23
Accessories
Remote control
The wireless function of your hearing instruments allows
you to use a remote control to change the program and
volume of your hearing instruments.
For further information about the remote control, contact
your Hearing Care Professional or refer to the remote
control user guide.
In the event your hearing instruments can be
controlled by another person's remote control,
return hearing instruments and remote control
to your Hearing Care Professional.
Tek wireless enhancement
Your hearing instruments together with
the Tek Connect remote control will allow
you to connect your hearing instruments
to the growing world of technology. Via a
special Bluetooth connection it is possible
to receive audio signals from your mobile,
your television or your mp3-player.
For detailed information and instructions
refer to the Tek user guide or ask your
Hearing Care Professional.
24
Troubleshooting tips
Troubleshooting tips
EN
Your hearing instruments are extremely reliable devices.
Should a problem occur, it can usually be corrected
quickly. Use these troubleshooting tips to resolve simple
issues.
Problem
Possible solution
Sound is weak.
Replace empty battery.
Clean earmold.
Increase volume.
Hearing instrument emits whistling sounds.
Reinsert the earmold until it fits
securely.
Decrease volume.
Clean earmold.
Sound is distorted.
Decrease volume.
Replace empty battery.
Clean earmold.
Hearing instrument emits signal
tones.
Gently close battery compartment
completely.
Replace empty battery.
Hearing instrument does not
work.
Check if the hearing instrument is
turned on.
Gently close battery compartment
completely.
Replace empty battery.
Make sure battery is inserted correctly.
Power-on delay is active. Wait 18 seconds and check again.
Consult your Hearing Care Professional if you encounter
further problems.
25
Technical information
Technical information
Siemens Nitro 300 SP, Nitro 700 SP
Siemens Nitro 301 SP, Nitro 701 SP
FCC ID: SGI-WL002BTE
IC: 267AB-WL002
Operating frequencies: Fc=3.28 MHz
N14203
This Class B digital apparatus complies with Canadian
ICES-003.
Changes or modifications made to this equipment not expressly approved by SAT GmbH for compliance may void
the FCC authorization to operate this equipment.
FCC compliance
This device complies with Part 15 of the FCC Rules and
with RSS-210 of Industry Canada.
Operation is subject to the following conditions:
■ this device may not cause harmful interference, and
■ this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates,
26
Technical information
EN
uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
■ Reorient or relocate the receiving antenna.
■ Increase the separation between the equipment and
receiver.
■ Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
■ Consult the dealer or an experienced radio/TV technician for help.
27
Disposal information
Disposal information
Within the European Union, the marked equipment is
covered by "Directive 2002/96/EC of the
European Paliament and of the Council of
27 January 2003 on waste electrical and
electronical equipment."
Amended by "Directive 2003/108/EC" (WEEE).
Recycle hearing instruments, batteries and ac-
cessories according to national regulations.
With the CE marking Siemens confirms compliance
with the European Directive 93/42/EEC concerning
medical devices.
For the products with e2e wireless 2.0 Siemens additionally confirms compliance with the European Directive
99/5/EC (R&TTE) concerning radio and telecommunications terminal equipment.
28
Your hearing instrument configuration
Your hearing instrument configuration
Hearing instrument
LEFT
RIGHT
Model
Serial number
Battery
□ yes □ no
Power-on delay
□ yes □ no
□ yes □ no
Volume control
□ yes □ no
□ yes □ no
Program button
□ yes □ no
□ on □ off
Low battery warning
□ on □ off
□ on □ off
Volume control limit
□ on □ off
Volume control change
□ on □ off
Signal tones
□ on □ off
Program
Description of the program
1
2
3
4
5
Remote control
Model
Serial number
29
EN
30
© Siemens AG, 12.2011 · ANR
Document No. A91SAT-00944-99T3-7600
Order/Item No. 105 970 12
Printed in Germany
Siemens Audiologische Technik GmbH
Gebbertstrasse 125
91058 Erlangen
Germany
Phone +49 9131 308 0
www.siemens.com /hearing