Cisco Model EPC2203 EuroDOCSIS 2.0 Cable

Data Sheet
Cisco Model EPC2203 EuroDOCSIS 2.0 Cable Modem
with Embedded MTA
®
The Cisco Model EPC2203 Cable Modem (EPC2203) is a high-speed cable modem
with an embedded media terminal adapter (EMTA). The EPC2203 features single line or
two RJ-11 telephone ports for Voice over Internet Protocol (VoIP) service along with a
10/100BASE-T Ethernet port and a USB 1.1 port for high-speed data connectivity.
The EPC2203 also features Dual Mode. This feature allows the service provider to
®
deploy the EPC2203 in networks that use DOCSIS 6 MHz downstream modulation.
The EPC2203 is designed to meet EuroPacketCable™ 1.0 and EuroDOCSIS™ 2.0
specifications and is backward compatible with EuroDOCSIS 1.1 and EuroDOCSIS 1.0
networks. The EPC2203 uses advanced line interface technology to provide multi-country
toll-quality telephone service using existing in-home wiring. The EPC2203 supports 10
REN total, 5 REN loading on each phone line.
Figure 1.
Cisco Model EPC2203 EuroDOCSIS 2.0 Cable Modem with EMTA (image may vary from actual
product and specification)
The EPC2203 fully supports the CODECs specified in EuroPacketCable 1.5. Additional CODECs
are available through a software upgrade that includes a high fidelity CODEC option for toll-quality
plus service. Standard VoIP call signaling is compliant with EuroPacketCable’s (MGCP/NCS)
specifications. Software upgrades are available to support Session Initiation Protocol (SIP) call
signaling.
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 1 of 10
Data Sheet
Features
Standards Support
●
Designed to meet EuroDOCSIS 2.0 specifications
●
Backward compatible with EuroDOCSIS 1.1 and 1.0 networks
●
Designed to meet EuroPacketCable 1.5 and EuroPacketCable 1.0 specifications
●
Support for up to 64 users (1 USB port user and up to 63 users on user-supplied Ethernet
hubs)
Connections
●
10/100BASE-T auto-sensing/auto-MDIX Ethernet port
●
USB 1.1 client port (optional)
VoIP Support
●
Cable modem with an Embedded MTA that provides two lines of voice services
●
Toll-quality, high-compression, and high-fidelity (exceeding toll quality) CODEC options
Design and Function
●
Attractive, compact design and versatile orientation to stand vertically, lie flat on the desktop
or shelf, or mount easily on a wall
●
Front panel LEDs provide visual feedback or real-time operational status
●
TR-068-compliant color-coded connectors and cables for easy installation and setup
●
Both vertical and horizontal installation options
●
Rugged electronic components for long-term reliability
Management
●
Software upgradeable by network download
●
Remote manageability using SNMP V1/V2 and V3
Software and Documentation
●
CD-ROM containing user guide
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 2 of 10
Data Sheet
Figure 2.
Cisco Model EPC2203 Front Panel shown with non-battery enclosure (image may vary from actual
product and specification)
Table 1.
Front Panel Features
Feature
Description
Indicators
POWER, DS, US, ONLINE, LINK, TEL 1, TEL2
Color
Black textured, dark gray housing, white text, green LEDs
Figure 3.
Cisco Model EPC2203 Back Panel shown with non-battery enclosure (image may vary from actual
product and specification)
Table 2.
Back Panel Features (non-battery enclosure)
Feature
Description
POWER
Connects the EMTA to the DC output of the AC power adapter that is provided with your EMTA
(units shipping to the EU have power connectors with integrated power switch)
Connector Color: Black
POWER SWITCH
Turns power on and off to the device (power switch provided on all products carrying the CE
mark)
TELEPHONE
Connector Color: Gray
RJ-11 telephone ports connect to home telephone wiring, conventional telephones, or fax
machines
ETHERNET
10/100BASE-T RJ-45 Ethernet port connects to the Ethernet port on a PC or IP set-top
Connector Color: Yellow
USB (option)
USB 1.1 port connects to the USB port on your PC
Connector Color: Blue
REBOOT EMTA
Resets the EMTA
CABLE
F-connector connects to an active cable signal from your cable service provider
Connector Color: White
MAC ADDRESS LABEL
Displays the MAC address of the cable modem
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 3 of 10
Data Sheet
Product Specifications
Table 3.
Product Specifications
Specification
Value
Voice Specifications
Call Signaling Protocol





MGCP/NCS including configurable IPsec encryption
Configurable to support RFC2833 event signaling
Supports Bell103 detection: Improves alarm panel and Point of Sale (POS) interoperability
by optimizing DSP for Bell103 protocol
Software upgradeable to support Session Initiation Protocol (SIP)
The following SIP standards are supported:
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
◦
RFC 2617 HTTP Authentication: Basic and Digest Access Authentication
RFC 2976 The SIP INFO Method
RFC 3261 SIP: Session Initiation Protocol
RFC 3262 Reliability of Provisional Responses in Session Initiation Protocol (SIP)
RFC 3263 Session Initiation Protocol (SIP): Locating SIP Servers
RFC 3264 An Offer/Answer Model with Session Description Protocol (SDP)
RFC 3265 Session Initiation Protocol (SIP)-Specific Event Notification
RFC 3420 Internet Media Type message/sipfrag
RFC 3428 Session Initiation Protocol (SIP) Extension for Instant Messaging
RFC 3515 The Session Initiation Protocol (SIP) Refer Method
RFC 3842 A Message Summary and Message Waiting Indication Event Package for the
Session Initiation Protocol (SIP)
◦ RFC 3892 The Session Initiation Protocol (SIP) Referred-By Mechanism
◦ RFC 3903 Session Initiation Protocol (SIP) Extension for Event State Publication
◦ Draft-ietf-mmusic-sdp-new-24 SDP: Session Description Protocol (Replacement for RFC
2327)
◦ Draft-ietf-sipping-cc-transfer-01 Session Initiation Protocol Call Control – Transfer
◦ Draft-ietf-sip-session-timer-08 The SIP Session Timer
◦ Draft-ietf-sipping-realtimefax-01 SIP Support for Real-time Fax: Call Flow Examples And
Best Current Practices
◦ Draft-ietf-mmusic-sdescription-09 Session Description Protocol Security Descriptions for
Media Streams
◦ Draft-ietf-sip-replaces-02 The Session Initiation Protocol (SIP) "Replaces" Header
Provisioning Modes
CODECS




Full EuroPacketCable secure provisioning
Kerberos support with NVRAM ticket caching
Configurable EuroPacketCable-lite (MTA config file provisioning without security)
Configurable for non-EuroPacketCable (MTA configuration using EuroDOCSIS config file)
Standard: G.711, T.38 Fax Relay, iLBC, and BV16
Software upgradeable to support other CODEC combinations including:






G.711 and G.728
G.711 and G.729
G.711 and G.729 a/e
G.711 and BV16 and BV32 (High fidelity – near CD quality)
G.711 and G.723
G.711 and G.726
CODEC Packetization
Intervals
10, 20, and 30 mS
CODEC Synchronization
CODEC synchronization to UGS time clock allows slip-free end-to-end sync to PSTN clock
(minimizes frame slips that can cause Fax/Analog Modem call failures)
CODEC Encryption
Configurable to support AES-128 encryption or no encryption modes
Hearing Impaired Services
Support
TDD support including detection of V.18 including Annex A
Fax and Analog Modem
support
DSP based Modem/Fax Tone detection and support for Voice Band Data Mode with autoCODEC negotiation and auto-control of echo canceller, jitter buffer, and voice activation
detection (VAD)
Jitter Buffer Support
Adaptive dynamically controlled
Latency Control
Configurable min / max jitter buffer size
Audio Gain Levels
Independently Configurable transmit and receive audio gains
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 4 of 10
Data Sheet
Specification
Value
Silence Suppression
Configurable VAD with comfort noise generation
Packet Loss Concealment
ANSI T1.521-1999
Call Connection Quality
Monitoring
RTCP, RFC1889, RFC1890, SNMP MIB for last call quality statistics
Dialing Modes
DTMF and configurable pulse dial support
DTMF Relay
RFC2833 including fast (40mS) DTMF Relay for alarm system signaling compatibility
Layer 2 Quality of Service


Full EuroPacketCable secure DQOS with GateID including UGS and UGS/AD
DQOS Lite support including UGS and UGS/AD
Layer 3 Quality of Service
Configurable DiffServe/TOS support for Signaling, RTP, and RTCP flows
Payload Header
Suppression (PHS)
Supported for RTP and RTCP packet flows to reduce per-call network bandwidth.
Advanced support for Dynamic Payload Header Suppression using Propane Technology.
Management
SNMPv3, SNMPv2, Telnet with configurable user ID and password, internal log, and external
Syslog support
Echo Cancellation
G.168 with extended echo tail support
Call Feature Support






















Caller ID
Call Waiting with Caller ID
Cancel Call Waiting
Call Conferencing (3-way calls)
Configurable hook flash support
Distinctive Ringing (Configurable for up to 11 ring patterns per phone line)
Ring splash
Stutter dial tone
Off hook warning tone
Open Switch Interval support to enhance answering machine compatibility
Configurable star codes
Euro/US hook-flash type
Call transfer
Message Waiting Indicator
Warm Line
Call Forwarding Unconditional
Call Forwarding on Busy
Call Forwarding No Answer
Call return
Redial Call
Automatic redial
Other call features available with compliant CMS or gateway
Telephone Ring Loading
Full 5 REN support on each phone line (10 REN total)
Ring Signal
Configurable balanced ring with configurable DC offset
Max Phone Line Distance
Supports up to 1000 ft of AWG26 wire (0.4 mm) on each phone line. Supports operation with
typical in-home telephone wiring
Country-Specific
Telephone Parameters
Supported
United States, Japan, United Kingdom, Germany, France, Belgium, Netherlands, Finland, Italy,
Switzerland, Sweden, Denmark, Brazil, ETSI 101 909-18
High Speed Data
Simultaneous Access
Bridged Ethernet and USB data ports
Cable Modem Access
Protection
Software based standby feature disables bridging to the WAN when enabled
Max CPE
Configurable up to 64 CPE devices (1 USB and 63 Ethernet)
RF Downstream
Input Frequency Range
108 to 862 MHz
Demodulation
64 QAM or 256 QAM
Maximum Data Rate
41.4 Mbps for 64 QAM and 55.2 Mbps for 256 QAM, 8 MHz channel
Bandwidth
8 or 6 MHz
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 5 of 10
Data Sheet
Specification
Value
Operating Level Range
+43 to +73 dBµV for 64 QAM
+47 to +77 dBµV for 256 QAM
Input Impedance
75 ohms
RF Upstream
Frequency Range
5 to 65 MHz
Modulation
QPSK
8 QAM
16 QAM
32 QAM
64 QAM ATDMA
128 QAM SCDMA
Maximum Data Rate
5.12 Mbps for QPSK
10.2 Mbps for 16 QAM
30.0 Mbps for A-TDMA and SCDMA
Bandwidth
200 kHz to 6.4 MHz
Operating Level Range
(all values +/- 0.5 dBmV)
TDMA
SCDMA
EuroDOCSIS Mode
QPSK
+68 to +118 dBµV
8QAM
+68 to +115 dBµV
16QAM
+68 to +115 dBµV
32QAM
+68 to +114dBµV
64QAM
+68 to + 114 dBµV
QPSK
+68 to +113dBµV
8QAM
+68 to +113 dBµV
16QAM
+68 to +113 dBµV
32QAM
+68 to +113 dBµV
64QAM
+68 to +113 dBµV
128QAM
+68 to +113 dBµV
Electrical
Input Voltage

Standard enclosure
12 VDC
Power Consumption
< 4.1 watts, on-hook
(normal operation)
< 7 watts, both lines off-hook
Data Ports
One (1) RJ-45 Ethernet port, 10/100BASE-T (auto-sensing with auto-MDIX)
One (1) USB 1.1 Type B
RF
One (1) Female “F” type
Output Impedance
75 ohms
Telephone / Fax
Two (2) RJ-11 supporting single-line and multi-line pinout; see Ordering Information for
additional details
Mechanical
Dimensions (W x D x H)

Standard Housing
(Including “F” connector)
15 cm x 13.5 cm x 3.5 cm (5.9 in. x 5.3 in. x 1.4 in.)
Weight (approximate)

Standard Housing
0.29 kg (10.1 oz)
Operating Temperature
32˚ to 104˚F (-0˚ to 40˚C)
Operating Humidity
0 to 90% RH non-condensing
Storage Temperature
-4˚ to 140˚F (-20˚ to 60˚C)
Standards and Approvals
Designed to meet with the
following standards
EuroPacketCable 1.0
EuroDOCSIS 2.0, EuroDOCSIS 1.1
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 10
Data Sheet
Specification
Value
Regulatory Compliance
Regulatory and Safety
Approvals
As required per country where the EPC2203 will be used
Ordering Information
Table 4.
Ordering Information
Description
Part Number
2-line VoIP, Standard Housing No Battery Capability
2-Line VoIP Cable Modem with EMTA for International markets. Includes:





4011095
EuroPacketCable 1.0 / EuroDOCSIS 2.0
Standard housing (no battery backup capability)
230 VAC / 50 Hz, 12 VDC / 1 A wall-mount style linear-switching power supply for Europe
Ethernet and USB cables
CD-ROM containing user guide and USB drivers
2-Line VoIP Cable Modem with EMTA for International markets. Includes:
● EuroPacketCable 1.0 / EuroDOCSIS 2.0
4013276
● Standard housing (no battery backup capability)
● 100-240 VAC / 50-60 Hz, 12 VDC / 1 A desktop style switching-regulated universal power supply with
detachable power cord
● Power cord, Europe
● Ethernet and USB cables
● CD-ROM containing user guide and USB drivers
2-Line VoIP Cable Modem with EMTA for International markets. Includes:
● EuroPacketCable 1.0 / EuroDOCSIS 2.0
4014659
● Standard housing (no battery backup capability)
● 230-240 VAC / 50 Hz, 12 VDC / 1 A wall-mount style linear-switching power supply for the UK
● Ethernet and USB cables
● CD-ROM containing user guide and USB drivers
2-Line VoIP Cable Modem with EMTA for International markets. Includes:
● EuroPacketCable 1.0 / EuroDOCSIS 2.0
4014719
● Standard housing (no battery backup capability)
● 230 VAC / 50 Hz, 12 VDC / 1 A wall-mount style linear-switching power supply, Europe
● No Ethernet or USB cables
Customer-specific configuration
2-Line VoIP Cable Modem with EMTA for International markets. Includes:
● EuroPacketCable 1.0 / EuroDOCSIS 2.0
4022364
● Standard housing (no battery backup capability)
● 230 VAC / 50 Hz, 12 VDC / 1 A wall-mount style linear-switching power supply, Europe
● No Ethernet or USB cables
Customer-specific configuration
2-Line VoIP Cable Modem with EMTA for International markets. Includes:
● EuroPacketCable 1.0 / EuroDOCSIS 2.0
4025303
● Standard housing (no battery backup capability)
● 230 VAC / 50 Hz, 12 VDC / 1 A wall-mount style linear-switching power supply, Europe
● Ethernet and USB cables
● (2) TEA, RJ-11 to 3-port ISDN adapter
● USB port plug
● Customer specific branding label
● CD-ROM containing user guide and USB drivers
Customer-specific configuration
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 7 of 10
Data Sheet
Description
Part Number
2-line VoIP, Standard Housing No Battery Capability
2-Line VoIP Cable Modem with EMTA for International markets. Includes:
● EuroPacketCable 1.0 / EuroDOCSIS 2.0
4022764
● Standard housing (no battery backup capability)
● 100-230 VAC / 50 Hz, 12 VDC / 1 A wall-mount style switching-regulated universal power supply,
Europe
● Ethernet and USB cables
● CD-ROM containing user guide and USB drivers
Customer-specific configuration
2-Line VoIP Cable Modem with EMTA for International markets. Includes:
● EuroPacketCable 1.0 / EuroDOCSIS 2.0
4039336
● Standard housing (no battery backup capability)
● 220 VAC / 50 Hz, 12 VDC / 1 A wall-mount style linear-switching power supply
● Ethernet cable
● No USB cable
● CD-ROM containing user guide
China
2-Line VoIP Cable Modem with EMTA for International markets. Includes:
● EuroPacketCable 1.0 / EuroDOCSIS 2.0
4036645
● Standard housing (no battery backup capability)
● 2-line VoIP, one (1) RJ-11 connector on rear panel
● Bulk Pack
● No power supply (order & ship separately)
● No USB or Ethernet cable
● CD-ROM containing user guide and USB drivers
Europe (Customer-specific configuration)
2-Line VoIP Cable Modem with EMTA for International markets. Includes:
● EuroPacketCable 1.0 / EuroDOCSIS 2.0
429169
● Standard housing (no battery backup capability)
● 230 VAC / 50 Hz, 12 VDC / 1 A wall-mount style linear-switching power supply, Europe
● Ethernet and USB cables
● CD-ROM containing user guide and USB driver
Europe (Customer-specific configuration)
Description
Part Number
1-Line VoIP, Standard Housing No Battery Capability
1-Line VoIP Cable Modem with EMTA for International markets. Includes:
● EuroPacketCable 1.0 / EuroDOCSIS 2.0
4017723
● Standard housing (no battery backup capability)
● 1-line VoIP, one (1) RJ-11 connector on rear panel
● 230-240 VAC / 50-60 Hz, 12 VDC / 1 A wall-mount linear-switching power supply, Europe
● Bulk Pack
● No USB port
● No USB or Ethernet cable
● CD-ROM containing user guide and USB drivers
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 8 of 10
Data Sheet
Replacement Components
Table 5.
Replacement Components
Description
Part Number
AC Power Supplies, 12 VDC
12 VDC High Efficiency Linear-Switching, Class 2
230 VAC / 50-60 Hz, 12 VDC /1 A wall-mount linear-switching power supply for Australia
4018797
230 VAC / 50-60 Hz, 12 VDC /1 A wall-mount linear-switching power supply with Euro style connector
4015453
230-240 VAC / 50-60 Hz, 12 VDC /1 A wall-mount linear-switching power supply with BS-1363 United
Kingdom style 3-pin connector
4018794
230 VAC / 50-60 Hz, 12 VDC /1 A wall-mount linear-switching power supply (bulk pack), Europe
4036794
12 VDC Universal Switching Mode, Class 2
100-240 VAC / 50-60 Hz, 12 VDC / 1 A wall-mount universal switching-regulated power supply
4022057
100-240 VAC / 50-60 Hz, 12 VDC / 1 A desktop style universal switching-regulated power supply with
detachable power cord
4021485
(power cord not included, order power cord separately)
Power Cords, Class 2
Power cord, 2 conductor, European, Euro plug CEE7/16 to C7
503414
Power cord, 2 conductor, United Kingdom, BS1363 to C7
1002798
Cables
Ethernet cable, 1.2m
740580
Ethernet cable, 2m
4018790
USB cable
740579
User Guide and USB Drivers
CD-ROM with user guide and USB drivers
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
4029640
Page 9 of 10
Data Sheet
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and
other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. EuroDOCSIS,
EuroPacketCable, and PacketCable are trademarks of Cable Television Laboratories, Inc. DOCSIS is a
registered trademark of Cable Television Laboratories, Inc.
Other third party trademarks mentioned are the property of their respective owners.
The use of the word partner does not imply a partnership relationship between Cisco and any other company
(1009R).
Specifications and product availability are subject to change without notice.
 2005–2008, 2010 Cisco and/or its affiliates. All rights reserved.
Cisco Systems, Inc.
800 722-2009 or 678 277-1120
www.cisco.com
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Part Number 7008321 Rev H
November 2010
Page 10 of 10