Bay Networks 6300 Operating instructions

Fire Detection - Addressable
Protec
Protec Fire Detection plc
Protec Algo-TecTM 6300
Interactive Digital Addressable Fire Control System
A D D R ESS IN G
S A F E T Y
SYST E M S
W I T H
I NT E L L I G E N CE
Fire Detection - Addressable
Protec
P r ot ecFire
Fir e Detection
De tecti on pl cplc
Protec
Protec Algo-TecTM 6300
INTERACTIVE DIGITAL ADDRESSABLE
FIRE CONTROL SYSTEM
The Protec Algo-Tec™ 6300 Interactive Digital
Addressable System unwrapped:
The Protec Algo-TecTM 6000 protocol developed by
Protec’s in-house Research and Development team is
utilised by the Protec Algo-TecTM 6300 interactive digital
addressable fire control systems. Immunity to false
alarms, more responsive fire detection, and ease of use
has all been achieved to develop one of the most reliable
systems available.
Protec Algo-Tec™ 6300
The name Algo-TecTM is a derivative of Protec algorithms.
Algorithms are logical mathematical procedures for
solving problems. Protec have developed fire detection
algorithms coupled with fuzzy logic specifically designed
to reduce unwanted fire alarms and to enhance the
sensitivity of the system to true fire phenomenon. The
Algo-TecTM algorithms are exclusively utilised by the
Protec Algo-TecTM 6400 and 6300 Interactive Digital
Addressable Fire Control Systems.
Interactive
Algo-TecTM evaluates the data of each fire sensor
and is able to learn from the information received.
This may simply be to recognise that a sensor is
becoming contaminated or in a dirty environment
and to automatically increase the alarm threshold
to compensate for the background levels (Threshold
Compensation).
More complex Algo-TecTM functions include the ability
to discriminate between certain fire and non-fire
conditions, filtering out certain environmental stimuli,
and increasing the sensitivity of a sensor when an
increase in temperature is detected.
The net effect of the interaction between the sensors
and the Algo-TecTM decision making is enhanced
performance, through immunity to false alarms and more
responsive fire detection.
Algo-Tec™ 6000PLUS
Interactive Decision Making Algorithms - Typical Applications
Office Mode (High Performance)
Clean Mode (Extra High Performance)
DISCRIMINATING
ALGORITHM
Cigarette Smoke
ALARM
Computer Room Fire
ALARM
Computer Fire
ALARM
Printer Paper Fire
ALARM
Bin Fire
Day/Night Mode
CAUTION
ALARM
Chemical Fire
Bedroom Mode
Factory Loading Bay
DISCRIMINATING
ALGORITHM
Offices
Steam From Bathroom
Digital Addressable
The data communication between the sensors and the
control equipment is Digital.
The Algo-TecTM protocol utilised by the 6000 system
enables high levels of data to be transferred, providing
far more detailed information than was previously
achievable with analogue addressable systems. It should
however be noted that many analogue addressable
systems use digital communication but do not transfer
the high levels of data associated with the Algo-TecTM
protocol. Speed, stability, excellent EMC and security all
serve to enhance the Algo-TecTM Digital signalling. Why
go analogue addressable when you can now choose
Algo-TecTM Digital Addressable.
Day Mode:
Office mode (high performance)
Day Mode:
Heat detection only (6000PLUS/OPHT)
Offices
Factory Loading Bay
DISCRIMINATING
ALGORITHM
Aerosols in Bedroom
ALARM
Night Mode:
Clean mode (Extra high performance)
Night Mode:
Smoke & Heat detection
Smoldering Fire
NOTE: The above examples give an indication of system reaction to intermittent contaminants and
typical fire sources in a correctly designed BS5839 system . They by no means detail the full complexity
of the systems decision making algorithms. Examples are for 6000PLUS/OPHT.
A D D R E S S I N G
S A F E T Y
S Y S T
Typical 6300 Network System
• Cost Effective High specification interactive digital
addressable fire detection and alarm system,
providing a cost effective solution for small, medium
and large sized buildings and sites.
• Design Flexibility Up to 32 control panels, repeats and illuminated zonal
mimics can be networked enabling system design
and expansion to be easily achieved to suit the site
for economic wiring and operational convenience.
230V ac
230V ac
BUILDING 3
• Easy to Install An extensive range comprising Loop Powered Alarm
Sounders, Beacons, Interfaces, Manual Call Points
and Sensors can all be connected to the nearest
control panel using a single 2-core cable for each
of the high capacity Loops (up to 4), accommodating
up to 191 devices per Loop, 512 maximum per panel.
BUILDING
4
Up to 32 panels on a network
230V ac
• Reduced False Alarms The Protec Algo-TecTM 6000 interactive fire sensors
utilise advanced discriminating algorithms for
maximum reliability and immunity to false alarms.
• Enhanced Performance The Protec Algo-TecTM 6000 sensors learn from
their environment, applying interactive decision
making algorithms to provide stability, threshold
compensation and optimised performance.
BUILDING 5A
BUILDING 2
• Secure Detection Loops Many Protec Algo-TecTM 6000 devices incorporate
built-in short circuit isolator units. These can be
located as required.
2 Core RS485
Secure Network
230V ac
BUILDING 1
• Secure Network Wired as a loop, the network’s dual channel RS485
link ensures that no single fault will affect the system.
BUILDING
5B
• Easy to Address ‘FAST’ addressing (Firmware Addressed Secure
Technology) ELIMINATES troublesome and time
consuming setting of address cards and DIL switches.
• Devices Display Address Number ‘RVAV’ Remote Visual Address Verification.
Confirmation of the correct location of each device
can be easily identified, using the devices in-built LED
to indicate the device address number.
24V dc From Panel or P.S.U.
230V ac
T E M S
• On Site Flexibility Configuration of all system functions is fully site
programmable.
• Reduced Maintenance Costs Early indication and reporting of sensors approaching
contamination level reduce false alarms and enable
dirty sensors to be cleaned or replaced.
• Optional RS232 Port Typically used to connect to a colour graphics
system, pager system or BMS interface. Allows PC
connection for backup and programming.
Colour Graphics System
• Designed to EN 54-2 & 4
W I T H
I N T E L L I G E N C E
Fire Detection - Addressable
FEATURES & BENEFITS
Fire Detection - Addressable
Protec
P r ot ecFire
Fir e Detection
De tecti on pl cplc
Protec
Protec Algo-TecTM 6300
INTERACTIVE DIGITAL ADDRESSABLE
FIRE CONTROL SYSTEM
CONTROLS & DISPLAYS
System Features
The Protec Algo-TecTM 6300 is an interactive digital
addressable fire detection and alarm system ideally
suited for small , medium & large sized buildings such
as nursing homes, hotels and offices. The control panel
is designed and manufactured by Protec to comply with
EN 54-2 & 4. The control panel is available as surface
or recessed mounted with a moulded polycarbonate
hinged door finished in storm grey, or optionally with
polished solid brass or brushed stainless steel finish for
recess mounting only.
Secure Network
Up to 32 Algo-TecTM 6300 control and repeat panels
and illuminated zonal mimics can be interconnected
using the optional add in 6300 network card. Wired as
a loop the networks dual channel fault tolerant RS485
ensures that no single fault can disable the system. In
the event of multiple faults, each panel will function
independently. The network can be wired using copper
or fibre optic cables.
Non Networked Stand Alone System
For small single panel systems, the serial communication
link can be utilised to signal, up to 4 repeat panels using
a 4 core screened cable. A network card is not required.
Loops
Each 6300 control panel is equipped with 1, 2 or 4 high
capacity Algo-TecTM digital addressable data loops, with
up to 191 address capacity per loop. Total panel devices
is restricted to 512 inputs to comply with EN54 part 2. In
addition to sensors, interfaces and manual call points
the loop can also support loop powered SOUNDERS,
BEACONS and OPTICAL BEAM DETECTORS. Loop
powered sounder bases adopt the sensor address to
increase the capacity of the loops still further, resulting
in reduced cabling requirements, simplified installation
and associated cost savings.
Alarms
In addition to loop powered sounders and beacons, 4
programmable fully monitored alarm outputs are provided
at the panel for alternative wiring arrangements.
Auxiliary Contacts
One set of double pole changeover contacts, which are
programmable.
6300 Loop LCD Display
Zoned Mimic Panel
6300 Loop Powered LCD Repeat Display
The 6300/LOOP/LCD can be connected directly to the local Algo-TecTM digital
addressable data loop and takes up just one address. The facia displays power, fire,
fault, disablement and more alarms.
Fire and fault events are displayed on the 2x40 character LCD display and automatically
scroll. A backlight ensures that the events can be read in all lighting situations. Fire
events have highest priority and inhibit the display of fault events. A new event initiates
the internal buzzer and a mute button allows the internal buzzer to be muted.
Loop standby/Alarm load 60mA.
6300 Illuminated Zonal Mimic
The Protec 6300 customised, illuminated zonal mimic can be connected to the 6300
control panel in the same way as the 6300 repeat panel. The Illuminated mimic is housed
in a matching enclosure to the control and repeat panels. The fascia is manufactured
from Kemco finished in anodised aluminium effect and can be engraved to our clients
scaled drawing typically detailing the building outline and zonal areas and has a viewing
area of 360(W)mm x 340(H)mm . Up to 32 LED’s can be placed on the fascia and will be
illuminated by the appropriate zone activation. The illuminated mimic is available as
surface or recessed mounted with a hinged door finished in storm grey, or optionally
with a polished solid brass or brushed stainless steel finish recess mounting enclosure
and an engraved Kemco fascia in anodised aluminium or brushed brass effect finish.
A D D R E S S I N G
S A F E T Y
S Y S T
Liquid Crystal Display
The 80, large character liquid crystal display will under
normal quiescent conditions display the current date
and time with the option to also display a 40-character
user’s message such as site name.
In an alarm or fault condition the LCD will display the
device loop, address and zone number and up to 40
characters of user definable location text, programmable
on site using Protec 6300/WINTEXT windows based
software.
Device Location Text
Windows based text software is supplied free of charge
to our clients to enable you to enter the location text
on to the disk supplied and hand to our commissioning
engineer for loading into the panel during commissioning.
This simple process allows you more flexibility enabling
you to make any last minute changes & speed up the
entire process.
Repeat Panel
6300 Hercules Colour Graphics System
6300 Repeat Panel
The Protec 6300 repeat panel can be connected to the 6300 control panel’s serial
communications link connection, using a 4-core screened cable.
If the 6300 secure network is utilised then the repeat panel should be connected to
the secure network by adding the integral 6300 network card. The repeat panel has
an identical display to the control panel including 80 character LCD and 32 zone fire
LED’s. Full control of silence, accept, sound alarms and reset is included and can be
disabled. The repeat panel is available as surface or recessed mounted with a moulded
polycarbonate hinged door finished in storm grey, or optionally with polished solid brass
or brushed stainless steel finish for recess mounting only.
6300 Hercules Colour Graphics System
The Protec Colour Graphics System is a Windows based PC package providing a
graphical representation of large sites enabling the precise location of an incident to
be readily identified enabling a prompt response. Using touch screen or mouse, the
operator can track an incident and zoom from a site plan to intermediate plan listing
floor levels, then zoom to a specific floor plan and if necessary then zoom to a specific
detailed area within the floor plan showing the device in question. Colour prints of the
maps can be printed automatically or on demand.
T E M S
W I T H
I N T E L L I G E N C E
Printer
The integral printer is a 40-character low noise thermal
printer. In operation the printer will provide on demand
real time data of fire and fault conditions including time
and date of events along with the device number and
location text. By accessing the appropriate function
from the user menu facility a variety of reports can
be printed including the previous 100 incidents from
the event log, the system devices configuration and
programming matrix, devices which are becoming due
for cleaning and the current status of all devices.
Power Supply
The 6301, 6302 and 6304 control panels can be supplied
with an integral 3A dc switch mode charger and a
24V 10Ah sealed lead acid battery. The system is also
available, suitable for use with Protec 9000/BC range
remote power supplies with an extensive range of
battery and charger sizes.
On Site Programming
The Protec Algo-Tec™ 6300 system is on site
programmable. All of the commissioning configuration
data can be entered and/or backed up using the
Protec 6300/WINPROG windows based programming
software via a PC. This feature enables the system
to be re-configured and checked prior to attending
site simplifying commissioning works on site, enabling
text amendments to be carried out whilst on site and
providing an invaluable remote backup should the need
arise. The system configuration data can also be printed
using the control panels optional in-built thermal printer.
Fire Detection - Addressable
Controls and Display
All the functions of the Control Panel are accessed via
a modern styled hinged lockable door, moulded from
polycarbonate with a clear display viewing window.
When opened the door reveals the panel controls and
easy to follow operating instructions. These controls
are SILENCE, SOUND ALARMS, RESET and ACCEPT
plus a MENU push button to enable access to the
user menu facilities. The control panel display consists
of an 80 large character liquid crystal display, twin
common fire LED indicators, 32 separate zonal fire LED’s,
power on, pre-alarm, system fault, common fault, test
and disablement LED’s. An optional integral low noise
thermal printer is also available.
Fire Detection - Addressable
Protec
Plant shutdown
interface 6000/MICCO
Heavy duty plant shutdown
signal (Rated at 240V 5A)
INTERACTIVE DIGITAL ADDRESSABLE
EOL
Typical Sensor Variants
6000PLUS/OPHT/S = c/w Sounder
6000PLUS/OPHT/L = c/w LED Beacon
6000PLUS/OPHT/SL = c/w Sounder and LED Beacon
6000PLUS/OPHT/TS = c/w Talking Sounder
6000PLUS/OPHT/TSL = c/w Talking Sounder and LED Beacon
6000PLUS/HT 6000PLUS/OP
Alarm circuit
Zone circuit
6000/LPZA
Loop powered
zone alarm
interface
6000/ZAI
Zone alarm
interface
BC1/2.8
Single 2 wire loop cable
230V
Monitored fire station output
Optional RS232 port:
Hercules colour graphics
pager or BMS interface
} 2 Auxiliary fire C/O contacts
Fault C/O contacts
24V Aux. Output
Bomb alert/class change input
230V ac Supply
4 Core serial
communications link
(up to 4 Repeaters)
2 Core RS485 Network using 6300
Netcard in each panel/repeater
(up to 32 panels)
6000PLUS/OPHT FASTTM Interactive Optical Heat Sensor Interactive addressable high performance optical
smoke and heat multi-sensor. Other Optical Heat
Sensor variants include:
6000PLUS/OPHT/S, 6000PLUS/OPHT/L,
6000PLUS/OPHT/SL, 6000PLUS/OPHT/TS,
6000PLUS/OPHT/TSL
6300 Serial
Communication Link
Option 1
TM
6300 Secure Network
OR
6300/LOOP/LCD Repeater - Connected directly to the local data
loop and takes up just one address. The 1 x
40 character LCD Display provides clear text
location of fire and fault events.
Option 2
NOTE: The Serial Communication Link cannot be used if the secure network (option 2) is chosen.
KEY:
6000PLUS/FFBASE Fast Fixed Base - Fast fixed recessed base is
designed to recess the sensor into a false ceiling
to give a lower profile view of the sensor.
24V supply (4C)
Power supply unit
Programmable
} 4monitored
alarm outputs
FASTTM Interactive Optical Smoke Sensor Interactive addressable high performance optical
smoke sensor provide efficient reliable detection
using the light scatter sensing principle with
rapid response to a fire signal. Other Optical
Sensor variants include: 6000PLUS/OP/S
6000PLUS/BASE Low Profile Common Mounting Base Compatible with the above range of Algo-TecTM
6000PLUS Sensors.
EOL
Alarm circuit
FASTTM Interactive Heat Sensor - Interactive
addressable heat sensor with low thermal mass
thermister, giving fast response to temperature
increases. Other Heat Sensor variants include:
6000PLUS/HT/S, 6000PLUS/HT/SL
6000PLUS/HT/TSL
6000PLUS/OPHTCOFAST Interactive Optical Heat CO Sensor Interactive addressable high performance optical
smoke heat and carbon monoxide multi-sensor.
Other Optical Heat Sensor variants include:
6000PLUS/OPHTCO/S, 6000PLUS/OPHTCO/L,
6000PLUS/OPHTCO/SL, 6000PLUS/OPHTCO/TSL
EOL
Zone circuit
Loop Devices
The Protec Algo-Tec™ 6000PLUS sensor range has been developed
to incorporate advanced fire sensing technology, electronic
sounders, high intensity LED warning beacons and speech enhanced
talking sounder capability, all integrated within the sensor head and
powered from the loop.
LOOP 2
EOL
FIRE CONTROL SYSTEM
The Protec Algo-Tec™ 6000PLUS protocol utilises FAST™ addressing
(Firmware Addressed Secure Technology). Every FAST™ device is
manufactured with a unique serial number.
FAST™ addressing ELIMINATES troublesome and time consuming
address cards and DIL switching whilst being far more secure than
“soft addressing”.
Plant shutdown output
(Rated at 240V 5A)
6300 Loop repeater
LOOP 1
P r ot ecFire
Fir e Detection
De tecti on pl cplc
Protec
Protec Algo-TecTM 6300
Sprinkler delay
interface 6000/MICCO
Zone Alarm Interface
Heat Sensor
Monitored Input CC Output Interface
Optical Smoke and Heat Sensor
Electronic Sounder
Optical Smoke, Heat and CO Sensor
Flashing Beacon
Duct Probe Unit c/w Smoke Sensor
Talking Sounder with LED Beacon
Manual Call Point
6300 Loop LCD Display
Beam Detector
6300 Zonel Mimic
Loop Powered Zone Alarm Interface
6300 Repeat Panel
A D D R E S S I N G
S A F E T Y
S Y S T
500
550
600
650
Loop Length (Metres)
700
750
800
850
900
950
1000
50
100
6000PLUS/UG4DP Ventilation Duct Smoke Sensor Assembly - Single
pipe air sampling unit for air speeds from 0.5 to 20m
per sec. supplied with 6000PLUS/BASE suitable for
use with 6000PLUS/OP FASTTM interactive optical
smoke sensor.
150
200
Total
Loop
Load
in
Alarm
(mA)
250
300
350
6000/FIREBEAMFASTTM Addressable Loop Powered
Beam
Detector - Combined transmitter/receiver unit and
separate low level controller. With a beam range
of 5-100 metres.
400
450
500
550
600
1000
1050
1100
1150
Loop Length (Metres)
1200 1250 1300
1350
1400
1450
1500
50
6000/LEDFASTTM Addressable Loop Powered High Intensity
Flashing Beacon - The 6000/LED has 18 high
intensity LEDs, and due to the low current design,
is addressable and loop powered, utilising the
Protec Algo-TecTM 6000 Protocol.
100
150
Total
Loop
Load
in
Alarm
(mA)
6000/SSRFASTTM Addressable Loop Powered High Output
Electronic Sounder - utilises a Piezo driver unit
to enable high sound output and very low current
consumption.
200
250
300
350
400
450
n/a
500
n/a
550
n/a
600
n/a
n/a
as follows
follows
The conductor
conductorsize
sizerequired
requiredisas
1.0mm² 2Conductor
1.0mm
Conductorrequired.
required
2
1.5mm² Conductor
1.5mm
Conductorrequired.
required
2.5mm² 2Conductor
2.5mm
Conductorrequired.
required
6000PLUS/TSR2FASTTM Addressable Loop Powered Talking
Sounder - The 6000PLUS/TSR2 voice enhanced
talking sounder is available with seven voice
messages plus ‘bell’ sound in addition to the three
fire alarm tones compatible with the Protec range
of electronic sounders.
Maximum
loop
resistance
16 ohms16per
conductor
MAXIMUM
LOOP
RESISTANCE
OHMS
PER CONDUCTOR
Table detailing the loop standby and alarm load for typical
Algo-tec™ 6000 devices.
Description
Number of
Addresses
Loop
Standby
Load mA
Loop Alarm
Load mA
Manual Call Point
1
0.5
3.4
Loop Beam
1
3.65
7
Product
6000/MCP
6000/FIREBEAM
6000PLUS/HT
Heat Sensor
1
0.2
0.2
6000PLUS/HT/S
Heat Sensor c/w Sounder
1
0.4
5.4
6000PLUS/OPHT
Optical Smoke and Heat Sensor
1
0.2
0.2
6000PLUS/OPHT/S
Optical Smoke and Heat Sensor c/w
Sounder
1
0.4
5.4
6000PLUS/OPHT/SL
Optical Smoke and Heat Sensor c/w
Sounder and Beacon
1
0.4
10.4
6000PLUS/OPHT/TSL
Optical Smoke and Heat Sensor c/w
Talking Sounder and Beacon
1
0.4
13.4
6000PLUS/OPHTCO
Optical Smoke, Heat, and CO Sensor
1
0.45
0.45
6000PLUS/OPHTCO/S
Optical Smoke, Heat, and CO Sensor
c/w Sounder
1
0.45
5.45
6000/LED
Loop Beacon
1
0.5
5.5
6000/SSR
Loop Sounder
1
0.7
5.7
Loop Sounder Beacon
1
0.7
10.7
6000/SSR/LED
6000/ZAI*
6000/MICCO
Zone Alarm Interface
1
2
4
Monitored Input CC Output
1
0.55
5
Note: The following Loop Parameters should be observed
1) The total number of addressable devices should not exceed 191 per loop.
2) Add 20mA to total loop alarm load to allow for fire indicator LED’s on devices
3) The total loop alarm load should not exceed 600mA per loop.
* Auxiliary 24V dc supply required.
T E M S
W I T H
6000/SSR/LEDFASTTM Addressable Loop Powered High Output
Electronic Sounder with LED Beacon - a low
current loop powered addressable device. With
typical sound output of 100dB(A) at 1m, the tone
and volume options are selectable by the control
panel.
I N T E L L I G E N C E
6000PLUS/TSR2/LEDFASTTM Addressable Loop Powered Talking
Sounder with LED Beacon - the Protec
AlgoTec™ 6000PLUS/TSR2/LED is equipped with an
integrated voice enhanced sounder and high
intensity flashing beacon array.
6000/FIU
Flush Mounted Short Circuit Isolator Unit - To
isolate a short circuit fault on either the incoming
or outgoing loop cables. Suitable for a 30mm deep
electrical mounting box.
6000/LPZAFASTTM Addressable Flush Mounted Loop
Powered Zone Alarm Interface Unit - With a
monitored detection circuit suitable for use
with Protec 3000 series detection devices. Line
continuity maintained. Monitored alarm output
circuit rated at 24Vdc 50mA max. Suitable for a
45mm deep electrical mounting box. A loop short
circuit isolator is included.
6000/ZAIFASTTM Addressable Flush Mounted Zone Alarm
Interface Unit - With a monitored detection circuit
suitable for use with Protec 3000 series detection
devices. Line continuity maintained. Monitored
alarm output circuit rated at 24V dc 1A max.
Suitable for a 45mm deep electrical mounting box.
A loop short circuit isolator is included.
6000/MICCOFASTTM Addressable Flush Mounted Loop Powered
Monitored Input, Clean Contact Output Interface
Unit - With a monitored input circuit suitable for
use with simple switch devices and the output is
a clean changeover contact 5amp rated at 240V
ac. A link can be cut to provide a 7-second delay
to the input. Suitable for a 45mm deep electrical
mounting box. A loop short circuit isolator is incorporated.
Multi-way Input/Output Interfaces - A range of 16 way input/
output interfaces are available with monitored
alarm outputs or clean changeover contacts. All
interfaces are FASTTM addressable.
Fire Detection - Addressable
6000/MCPFASTTM Addressable Manual Call Point - Key
operated test facility, a loop short circuit isolator
is incorporated.
Guide to loop cable conductor sizing for the Protec 6300 system.
Fire Detection - Addressable
Technical Specification
6300 Control Panel
Complies with EN 54-2 & 4
Models:-
Specification:Power Supply
Working Voltage
Temperature Range
Maximum Humidity
Panel Model
Standby Load (Mains Fail Condition)
Alarm Load (Mains Fail Condition)
6301 - Single Loop Panel
6302 - 2 Loop Panel
6304 - 4 Loop Panel
Display
Digital Addressable Loops
Total Loop Load
Zones
Integral Charger
Integral Battery
Remote Power Supply
Programmable Alarm Outputs
Alarm Load
Fault Monitoring
Fault Output
Serial Communications Interface
Secure Network Auxiliary Output Supply
Common Fire Output (fire station)
Common Fault Output (fire station)
RS232 Communications Interface
Optional Integral Printer Dimensions (mm)
Approvals
Backlit liquid crystal display 2 lines of 40 characters.
1,2 or 4 loops, each with 191 address capacity. Total panel capacity is restricted to 512 Input addresses
to comply with EN 54-2. Algo-Tec™ 6000 Protocol.
600mA per loop including all loop connected devices.
32 Zone LED’s plus twin red common fire indicators.
3A dc Switch-mode.
10Ah 24V sealed lead acid.
The Protec 9000/BC range of power supplies are compatible with the 6300 panels.
Dual path outputs and fault signalling, (4 wire plus 2 wire, 2 primary power, 2 signals, 2 secondary power).
4 Monitored - Internal sounder circuits (1A rated @ 24V).
1 Set of non-monitored double-pole changeover contacts (1A rated @ 24V).
Up to 191 alarm outputs per loop with the use of additional loop O/P devices.
Maximum 3A with integral power supply unit.
Fully fault monitored to EN 54-2.
Single pole changeover contacts (1A rated @ 24V).
4 wire (2 power, 2 data) for up to 4 repeat/mimic panels.
To replace above serial interface when optional 6300 network card fitted to allow up to 32 panels / repeaters to be securely networked (2 wire loop).
24V dc fused at 250mA.
24V dc fully monitored output rated at 20mA. 1K EOL.
24V dc fully monitored output rated at 20mA. 1K EOL.
9 way ‘D’ type connector (Male). For program/text software upload/download.
40 character low noise thermal printer.
440(W) x 385(H) x 144(D).
(6301) LPCB Certificate No: 201ad/07, EC Certificate No: 0832-CPD-1474, Relevant Standard: EN 54-2 & 4.
(6302) LPCB Certificate No: 201ad/08, EC Certificate No: 0832-CPD-1475, Relevant Standard: EN 54-2 & 4.
(6304) LPCB Certificate No: 201ad/09, EC Certificate No: 0832-CPD-1476, Relevant Standard: EN 54-2 & 4.
Programmability
96 Input Groups System Wide
96 Output Groups per Panel
32 Zonal Output Groups per Panel
First 32 have an independent programmable time-out delay.
First 32 have an independent programmable delay for first 32 input groups.
Each is programmable as an alarm or control output.
Each is activated by a separate zone input for zones 1 to 32.
Programmable master time-out.
Selectable coincidence detection.
24 programmable Non-latching addresses.
24 programmable Non-latching Fire addresses.
6300 Repeat Panel/
6300 Illuminated Zonal Mimic
Power Supply
Standby Load Alarm Load
Serial Communications Link
Secure Network Dimensions (mm)
24V dc from local power supply or internal charger and battery (230V ac required).
50mA.
50mA.
4 wire (2 power, 2 data) for up to 4 repeat/mimic panels.
To replace above serial interface when optional 6300 network card fitted to allow up to
32 panels/repeats to be securely networked (2 wire loop).
440(W) x 385(H) x 144(W).
6300 Netcard
Standby/Alarm Load
Optional network card fitted to each control panel and repeat to be networked.
The network card replaces the serial communication link. Up to 32 panels/repeats can be securely networked (2 wire loop).
70mA per network card.
Protec
Protec Fire Detection plc
MANAGEMENT
SYSTEMS
Mains 230V ac nominal ± 10%.
21.5 - 30V dc.
0 - 40°C.
85% Non-condensing.
6301
6302
6304
90mA
115mA
170mA
210mA
260mA
345mA
Protec: Scotland
Tel: 0845 456 5390
Fax: 0845 456 5391
Protec: North East
Tel: 0845 456 5396
Fax: 0845 456 5397
LPCB ref. no. 201ad
Protec: Yorkshire
Tel: 0845 456 5388
Fax: 0845 456 5389
Protec: Midlands
Tel: 0845 456 5398
Fax: 0845 456 5399
Protec: South East Protec: South West
Tel: 0845 456 5394
Tel: 0845 456 5392
Fax: 0845 456 5395 Fax: 0845 456 5393
Company Policy is one of continuous improvement, we reserve the right to change specification without prior notice
Protec Fire Detection Plc, Protec House, Churchill Way, Nelson, Lancashire, BB9 6RT
Tel: 01282 717171 Fax: 01282 717273 Web: www.protec.co.uk Email: sales@protec.co.uk
MED1509 Issue 2 N 92-048-61C