HP Compaq Presario,Presario 7450 System information

Compaq Presario CQ35 and CQ36 Notebook PC
Maintenance and Service Guide
Document Part Number: 607790-001
January 2010
This guide is a troubleshooting reference used for maintaining and servicing the computer. It provides
comprehensive information on identifying computer features, components, and spare parts; troubleshooting
computer problems; and performing computer disassembly procedures.
© Copyright 2010 Hewlett-Packard Development Company, L.P.
Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. Intel, Core, Celeron, and
Pentium are trademarks of Intel Corporation in the U.S. and other countries. Microsoft, Windows, and Windows Vista are U.S.
registered trademarks of Microsoft Corporation. SD Logo is a trademark of its proprietor.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in
the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an
additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
First Edition: January 2010
Document Part Number: 607790-001
Safety warning notice
Å
WARNING: To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly
on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface,
such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow
the AC adapter to contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the
AC adapter comply with the user-accessible surface temperature limits defined by the International Standard for Safety of
Information Technology Equipment (IEC 60950).
Contents
1 Product description
2 External component identification
Top components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Buttons and fingerprint reader (select models only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Pointing devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Left-side components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Right-side components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bottom components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2–1
2–1
2–2
2–3
2–4
2–5
2–6
2–6
2–7
2–8
3 Illustrated parts catalog
Service tag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–1
Computer major components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–2
Display assembly subcomponents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–13
Plastics Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–14
Mass storage devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–15
Miscellaneous parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–16
Sequential part number listing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3–17
4 Removal and replacement procedures
Preliminary replacement requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1
Tools required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1
Service considerations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–1
Grounding guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–2
Component replacement procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–5
Service tag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–5
Computer feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–6
Battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–7
Hard drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–8
Memory module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–11
WLAN module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–12
RTC battery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–19
Optical drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–20
Keyboard. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–22
Keyboard cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–24
Right speaker. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–26
Top cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–27
Fingerprint reader board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–30
Left speaker. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4–31
v
Display assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LED board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Bluetooth module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Audio board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
USB board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power connector and cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System board. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fan/heat sink assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Processor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4–32
4–38
4–39
4–40
4–41
4–42
4–43
4–46
4–51
5 Setup Utility
Starting the Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Setup Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the language of the Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Navigating and selecting in the Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Displaying system information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Restoring default settings in the Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Exiting the Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setup Utility menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Main menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Security menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System Configuration menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Diagnostics menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5–1
5–1
5–1
5–2
5–2
5–2
5–3
5–3
5–3
5–3
5–4
5–4
6 Specifications
Computer specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13.3-in display specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hard drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Blu-ray ROM DVD±R/RW SuperMulti DL Drive specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DVD±RW and CD-RW SuperMulti Double-Layer Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . .
System DMA specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System memory map specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System interrupt specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System I/O address specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6–1
6–2
6–3
6–4
6–5
6–6
6–7
6–8
6–9
7 Screw listing
Phillips PM2.5×6.0 captive screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–1
Phillips PM3.0×4.0 screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–2
Phillips PM2.0×4.0 screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–3
Phillips PM2.0×9.0 screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–5
Phillips PM2.0×3.0 screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–6
Phillips PM2.5×9.0 screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–9
Phillips PM2.0×2.5 broadhead screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–10
Phillips PM2.5×6.0 screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–11
Phillips PM2.5×4.0 screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–12
Phillips PM2.0×7.0 captive screw . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7–14
8 Backup and recovery
Backup and recovery in Windows Vista . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–1
Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–1
Creating recovery discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8–1
vi
Backing up your information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Performing a recovery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Backup and recovery in Windows 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Creating recovery discs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Backing up your information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Performing a recovery. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8–2
8–4
8–5
8–5
8–6
8–7
9 Connector pin assignments
Audio-in (microphone). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Audio-out (headphone) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
External monitor. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
HDMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RJ-45 (network) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Universal Serial Bus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9–1
9–1
9–2
9–3
9–4
9–4
10 Power cord set requirements
Requirements for all countries and regions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–1
Requirements for specific countries and regions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10–2
11 Recycling
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11–1
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11–1
Index
vii
viii
1
Product description
CQ35 models
Category
Description
Name
Compaq Presario CQ35 Notebook PC
Discrete
graphics
subsystem
memory
UMA
graphics
subsystem
memory
9
9
Compaq Presario CQ36 Notebook PC
Processors
Intel® Core™2 Duo processors:
■ T9900 3.06-GHz processor, 6-MB L2 cache,
1066-MHz front side bus (FSB)
■ T9800 2.93-GHz processor, 6-MB L2 cache,
1066-MHz FSB
■ T9600 2.80-GHz processor, 6-MB L2 cache,
1066-MHz FSB
■ T9550 2.66-GHz processor, 6-MB L2 cache,
1066-MHz FSB
■ P8800 2.66-GHz processor, 3-MB L2 cache,
1066-MHz FSB
■ P8700 2.53-GHz processor, 3-MB L2 cache,
1066-MHz FSB
■ P8600 2.40-GHz processor, 3-MB L2 cache,
1066-MHz FSB
■ P7550 2.26-GHz processor, 3-MB L2 cache,
1066-MHz FSB
■ P7450 2.13-GHz processor, 3-MB L2 cache,
1066-MHz FSB
■ P7350 2.00-GHz processor, 3-MB L2 cache,
1066-MHz FSB
■ T6600 2.20-GHz processor, 6-MB L2 cache,
1066-MHz FSB
■ T6500 2.10-GHz processor, 6-MB L2 cache,
1066-MHz FSB
■ T6400 2.06-GHz processor, 6-MB L2 cache,
1066-MHz FSB
9
9
Intel Pentium® processors:
■ T4300 2.10-GHz processor, 1-MB L2 cache,
800-MHz FSB
■ T4200 2.00-GHz processor, 1-MB L2 cache,
800-MHz FSB
■ T3000 1.80-GHz processor, 1-MB L2 cache,
800-MHz FSB
9
9
Intel Celeron® T1600 1.66-GHz processor, 1-MB L2
cache, 667-MHz FSB
CQ36 models
Discrete
graphics
subsystem
memory
UMA
graphics
subsystem
memory
9
9
9
Continued
1–1
Product description
CQ35 models
Category
Chipset
Discrete
graphics
subsystem
memory
UMA
graphics
subsystem
memory
Intel Core i5 processors:
■ 540M 2.53-GHz processor, 3-MB L3 cache, SC
turbo up to 3.06 GHz
■ 520M 2.40-GHz processor, 3-MB L3 cache, SC
turbo up to 2.93 GHz
■ 430M 2.26-GHz processor, 3-MB L3 cache, SC
turbo up to 2.53 GHz
9
9
Intel Core i3 processors:
■ 350M 2.26-GHz processor, 3-MB L3 cache
■ 330M 2.13-GHz processor, 3-MB L3 cache
9
9
9
9
Description
Intel PM45
Discrete
graphics
subsystem
memory
Southbridge: ICH9m
UMA
graphics
subsystem
memory
9
9
Intel GM45
9
9
Intel HM55 Express
Graphics
CQ36 models
nVidia GeForce G 105M with 512 MB of dedicated
video memory
9
9
ATI Mobility Radeon HD4550 with 512MB of
dedicated video memory
9
Mobile Intel GMA 4500 MHD
9
Intel HD Graphics with dynamic frequency
Panel
Universal memory architecture (UMA, integrated) with
shared video memory:
■ Up to 157 MB when system memory ≥ 1024 MB
■ Up to 669 MB when system memory ≥ 2048 MB
■ Up to 1181 MB when system memory ≥ 3072 MB
■ Up to 1181 MB when system memory ≥ 4096 MB
on computer models with 32-bit operating systems
■ Up to 1631 MB when system memory ≥ 4096 MB
on computer models with 64-bit operating systems
9
9
■ 13.4-in, flush glass AntiGlare (1366 × 768),
high-definition (HD), LED display assembly
■ 16:9 wide aspect ratio
■ Typical brightness: 200 nits
■ Lighted logo on display enclosure
■ All display assemblies include two WLAN antennas
9
9
■ 13.3-inch or 13.4-in, BrightView (1366 × 768),
high-definition (HD), LED display assemblies
■ 16:9 wide aspect ratio
■ Typical brightness: 200 nits
■ Lighted logo on display enclosure
■ All display assemblies include two WLAN antennas
9
9
9
9
9
9
Continued
1–2
Product description
CQ35 models
Category
Memory
CQ36 models
Discrete
graphics
subsystem
memory
UMA
graphics
subsystem
memory
Discrete
graphics
subsystem
memory
UMA
graphics
subsystem
memory
■ 13.3-inch, touch screen, multitouch-enabled,
display assembly
■ 16:9 wide aspect ratio
■ Typical brightness: 200 nits
■ Lighted logo
■ All display assemblies include two WLAN antennas
9
9
9
9
Two customer-accessible/upgradable memory module
slots
Supports dual-channel memory
Supports the following configurations:
■ 8192-MB total system memory (4096 × 2,
dual-channel)
9
9
9
9
9
9
9
9
Description
■ 6144-MB total system memory
(2048 + 4096)
■ 4096-MB total system memory (2048 × 2,
dual-channel)
■ 3072-MB total system memory (2048 + 1024)
■ 2048-MB total system memory (1024 × 2,
dual-channel)
■ 2048-MB total system memory (2048 × 1)
■ 1024-MB total system memory (1024 × 1)
Supports up to 8 GB of PC2-6400, 800-MHz, DDR2
Supports up to 8 GB of PC3-10600, 1333-MHz, DDR3
Hard drives
Supports 9.50-mm, 6.35-cm (2.50-in) hard drives
Supports HP ProtectSmart Hard Drive Protection
Customer-accessible
Serial ATA (SATA)
Supports the following hard drives:
■ 500-GB, 7200- and 5400-rpm
■ 320-GB, 7200- and 5400-rpm
9
9
9
9
■ 250-GB, 7200- and 5400-rpm
■ 160-GB, 5400-rpm
■ 160-GB solid-state drive
Optical
drives
12.7-mm tray load
Serial ATA (SATA)
Fixed (removal of one screw required)
Customer-accessible
Parallel ATA
Supports no-optical-drive option
Supports the following drives:
■ Blu-ray ROM DVD±R/RW SuperMulti DL Drive with
LightScribe
■ Blu-ray ROM DVD±R/RW SuperMulti DL Drive
■ DVD±RW and CD-RW SuperMulti Double-Layer
Drive with LightScribe
Continued
1–3
Product description
CQ35 models
Category
Description
Discrete
graphics
subsystem
memory
UMA
graphics
subsystem
memory
Supports the following drives:
■ Blu-ray ROM DVD±R/RW SuperMulti DL Drive with
LightScribe
■ DVD±RW and CD-RW SuperMulti Double-Layer
Drive with LightScribe
CQ36 models
Discrete
graphics
subsystem
memory
UMA
graphics
subsystem
memory
9
9
Microphone
Analog microphone
9
9
9
9
Audio
High-definition audio
Integrated subwoofer
Supports Microsoft® requirements
Two Altec Lansing Pavilion-branded speakers
9
9
9
9
Webcam
VGA camera
Fixed (no tilt)
Activity LED
640 × 480 by 24 frames per second
9
9
9
9
Ethernet
Intel Realtek 8111C 10/100/1000 network interface
card (NIC)
9
9
Intel Realtek 8102E 10/100 NIC
Wireless
9
Ethernet cable included
9
9
Integrated WLAN options by way of wireless module
Two wireless antennas built into display assembly
Supports no-WLAN option
Support for the following WLAN formats:
■ Broadcom 4322AGN 802.11a/b/g/n WLAN module
■ Broadcom 4322AGN 802.11a/b/g/n WLAN module
with Bluetooth
■ Intel WiFi Link 5100 802.11a/b/g/n
■ Intel WiFi Link 5100 802.11a/b/g/n with Bluetooth
9
9
■
■
■
■
9
9
Atheros 9285G 802.11a/b/g/n
Atheros 9285G 802.11a/b/g/n with Bluetooth
Broadcom 4312G 802.11a/b/g WLAN module
Broadcom 4312G 802.11a/b/g WLAN module with
Bluetooth
■ Atheros 9280AGN 802.11a/b/g/n
■ Broadcom 4312G 802.11b/g
■ Intel Centrino Wireless-N 1000
9
9
9
9
9
9
9
9
9
■ Broadcom 43225 802.11b/g/n 2x2
External
One ExpressCard slot, supporting optional
media cards ExpressCard/34 cards
Digital Media Slot supporting Memory Stick (MS),
Memory Stick Pro (MSP), MultiMediaCard (MMC),
Secure Digital (SD) Memory Card, Secure Digital
Input/Output (SD I/O), and xD-Picture Card (XD).
Adapter (not included) provides support for mini
versions of SD, MMC, and MS Duo.
9
9
Continued
1–4
Product description
CQ35 models
CQ36 models
Discrete
graphics
subsystem
memory
UMA
graphics
subsystem
memory
Discrete
graphics
subsystem
memory
UMA
graphics
subsystem
memory
Category
Description
Ports
Audio-in (mono microphone)
Audio-out (stereo headphone)
Consumer infrared
eSATA
HDMI v. 1.3b supporting 1080p with HDCP key
HP Smart Adapter power
Multi-pin AC power
RJ-45 (Ethernet, includes link and activity lights)
USB v. 2.0 (3)
VGA (Dsub 15-pin) supporting:
■ 1920 × 1200 external resolution at 60 GHz
■ 1600 × 1200 external resolution at 75 GHz
hot plug/unplug with auto-detect
9
9
9
9
Keyboard/
pointing
devices
13-in keyboard
Available in:
■ Black with painted finish
■ White with molded finish (Canada, Denmark,
Finland, Japan, Norway, South Korea, and
Thailand)
TouchPad with two TouchPad buttons
Supports two-way scroll
Taps enabled as default
9
9
9
9
Power
90-W HP Smart Adapter with localized cable
requirements plug support (3-wire plug with ground pin, supports
3-pin DC connector)
9
9
65-W HP Smart Adapter with localized cable
plug support (3-wire plug with ground pin, supports
3-pin DC connector)
Security
9
9
Battery options:
9-cell, 2.55-Ah (83-Wh) Li-ion battery
6-cell, 2.55-Ah (55-Wh) Li-ion battery
6-cell, 2.20-Ah (47-Wh) Li-ion battery
9
9
9
9
Security cable slot
Fingerprint reader with Digital Persona software
support
9
9
9
9
Continued
1–5
Product description
CQ35 models
UMA
graphics
subsystem
memory
Discrete
graphics
subsystem
memory
UMA
graphics
subsystem
memory
Category
Description
Operating
system
Preinstalled:
Windows Vista® Business (32 bit)
Windows Vista Home Basic (32 bit)
Windows Vista Premium (64 and 32 bit)
Windows Vista Ultimate (64 bit)
FreeDOS
9
9
Windows 7 Professional (64 and 32 bit)
Windows 7 Home Premium (64 and 32 bit)
Windows 7 Home Basic (32 bit)
FreeDos
9
9
9
9
9
9
9
9
Serviceability End-user replaceable parts:
AC adapter
Battery (system)
Hard drive
Memory modules
RTC battery
Optical drive
WLAN module
WWAN module
1–6
Discrete
graphics
subsystem
memory
CQ36 models
2
External component identification
Top components
Display components
Item
Component
Description
(1)
Wireless antennas
On select computer models, at least two antennas send and receive signals
from one or more wireless devices.
antennas are not visible from the outside of the computer.
✎ The
For optimal transmission, keep the areas immediately around
the antennas free from obstructions.
(2)
Webcam light
On: The webcam is in use.
(3)
Webcam
Records audio and video and captures still photographs.
(4)
Internal microphone
Records sound.
(5)
Internal display switch
Turns off the display and initiates Sleep if the display is closed while the power
is on.
see wireless regulatory notices, refer to the section of the Regulatory, Safety and Environmental Notices that applies
✎ To
to your country or region. These notices are located in Help and Support.
2–1
External component identification
Buttons and fingerprint reader (select models only)
Item
Component
Description
(1)
Power button*
■ When the computer is off, press the button to turn on the computer.
■ When the computer is on, press the button briefly to initiate Sleep.
■ When the computer is in the Sleep state, press the button briefly to
exit Sleep.
■ When the computer is in Hibernation, press the button briefly to
exit Hibernation.
If the computer has stopped responding and Windows® shutdown
procedures are ineffective, press and hold the power button for at least
5 seconds to turn off the computer.
To learn more about your power settings:
■ In Windows Vista, select Start > Control Panel > System and
Maintenance > Power Options.
■ In Windows 7, select Start > Control Panel > System and Security >
Power Options.
(2)
Wireless button
Turns the wireless feature on or off, but does not create a wireless
connection.
establish a wireless connection, a wireless network must already be
✎ To
set up.
(3)
Volume mute button
Mutes and restores speaker sound.
(4)
Volume scroll zone
To decrease the volume, slide your finger to the left on the scroll zone or tap
the minus sign. To increase the volume, slide your finger to the right on the
scroll zone or tap the plus sign.
(5)
Fingerprint reader (select
models only)
Allows a fingerprint logon to Windows, instead of a password logon.
*This table describes factory settings. For information about changing factory settings, refer to the user guides located in
Help and Support.
2–2
CPQ Manual Title
External component identification
Keys
Item
Component
Description
(1)
esc key
Displays system information when pressed in combination with the fn key.
(2)
fn key
Executes frequently used system functions when pressed in combination with
a function key or the esc key.
(3)
Windows logo key
Displays the Windows Start menu.
(4)
Windows applications key
Displays a shortcut menu for items beneath the pointer.
(5)
Embedded numeric keypad keys
Can be used like the keys on an external numeric keypad.
(6)
Function keys
Execute frequently used system functions when pressed in combination with
the fn key.
2–3
External component identification
Lights
Item
Component
Description
(1)
Caps lock light
On: Caps lock is on.
(2)
Power lights (2)*
■ On: The computer is on.
■ Blinking: The computer is in the Sleep state.
■ Off: The computer is off or in Hibernation.
(3)
Wireless light
■ On: An integrated wireless device, such as a wireless local area network
(WLAN) device and/or a Bluetooth® device, is on.
■ Off: All wireless devices are off.
(4)
Volume mute light
■ White: Computer sound is on.
■ Amber: Computer sound is off.
(5)
Volume down light
On: The volume scroll zone is being used to decrease speaker volume.
(6)
Volume up light
On: The volume scroll zone is being used to increase speaker volume.
(7)
Num lock light
On: Num lock is on or the embedded numeric keypad is enabled.
(8)
Battery light
■ On: A battery is charging.
■ Blinking: A battery that is the only available power source has reached a
low battery level. When the battery reaches a critical low-battery level, the
battery light begins blinking more rapidly.
■ Off: If the computer is plugged into an external power source, the light is
turned off when all batteries in the computer are fully charged. If the
computer is not plugged into an external power source, the light stays off
until the battery reaches a low battery level.
(9)
Drive light
Blinking: The hard drive or optical drive is being accessed.
*The two power lights display the same information. The light on the power button is visible only when the computer is open.
The power light on the front of the computer is visible whether the computer is open or closed.
2–4
CPQ Manual Title
External component identification
Pointing devices
Item
Component
Description
(1)
TouchPad light
■ White: TouchPad is enabled.
■ Amber: TouchPad is disabled.
(2)
TouchPad*
Moves the pointer and selects or activates items on the screen.
(3)
Left TouchPad button*
Functions like the left button on an external mouse.
(4)
TouchPad on/off button
Enables/disables the TouchPad.
(5)
TouchPad scroll zone
Scrolls up or down.
(6)
Right TouchPad button*
Functions like the right button on an external mouse.
*This table describes factory settings. To view or change pointing device references:
■ In Windows Vista, select Start > Control Panel > Hardware and Sound > Mouse.
■ In Windows 7, select Start > Devices and Printers. Then, right-click the device representing your computer, and select
Mouse settings.
2–5
External component identification
Front components
Item
Component
Description
(1)
Power light
■ On: The computer is on.
■ Blinking: The computer is in the Sleep state.
■ Off: The computer is off or in Hibernation.
(2)
Battery light
■ On: A battery is charging.
■ Blinking: A battery that is the only available power source has reached a
low battery level or a critical battery level.
■ Off: If the computer is plugged into an external power source, the light is
turned off when all batteries in the computer are fully charged. If the
computer is not plugged into an external power source, the light stays off
until the battery reaches a low battery level.
(3)
Drive light
Blinking: The hard drive or optical drive is being accessed.
(4)
Consumer infrared lens
Receives a signal from the remote control (provided with select models only).
(5)
Audio-in (microphone) jack
Connects an optional computer headset microphone, stereo array
microphone, or monaural microphone.
(6)
Audio-out (headphone) jack
Produces sound when connected to optional powered stereo speakers,
headphones, ear buds, a headset, or television audio.
Left-side components
2–6
Item
Component
Description
(1)
Power connector
Connects an AC adapter.
(2)
AC adapter light
■ On: The computer is connected to external power.
■ Off: The computer is not connected to external power.
(3)
USB ports (2)
Connect optional USB devices.
(4)
Optical drive
Reads optical discs and, on select models, also writes to optical discs.
(5)
Optical drive light
Blinking: The drive is being accessed.
CPQ Manual Title
External component identification
Right-side components
Item
Component
Description
(1)
ExpressCard slot
Supports an optional ExpressCard/34 module.
(2)
Digital Media Slot
Supports the following optional digital card formats: Secure Digital (SD)
Memory Card, Secure Digital Input/Output (SD I/O), MultiMediaCard (MMC),
Memory Stick (MS), Memory Stick Pro (MSP), and xD-Picture Card (XD).
(3)
Digital Media Slot light
Blinking: The media card is being accessed.
(4)
eSATA/USB port
Connects a high-performance eSATA component, such as an eSATA external
hard drive, or connects an optional USB device.
(5)
HDMI port
Connects an optional video or audio device, such as a high-definition
television, or any compatible digital or audio component.
on your computer model, the computer may include an
✎ Depending
HDMI port or a USB port at this location.
(6)
RJ-45 (network) jack
Connects a network cable.
(7)
External monitor port
Connects an external VGA monitor or projector.
(8)
Vent
Enables airflow to cool internal components.
computer fan starts up automatically to cool internal components
✎ The
and prevent overheating. It is normal for the internal fan to cycle on and
off during routine operation.
(9)
Security cable slot
Attaches an optional security cable to the computer.
security cable is designed to act as a deterrent, but it may not
✎ The
prevent the computer from being mishandled or stolen.
2–7
External component identification
Bottom components
Item
Component
Description
(1)
Battery release latch
Releases the battery from the battery bay.
(2)
Battery bay
Holds the battery.
(3)
Wireless module compartment
Holds a wireless LAN module and the RTC battery.
prevent an unresponsive system, replace the wireless module only
✎ To
with a wireless module authorized for use in the computer by the
governmental agency that regulates wireless devices in your country or
region. If you replace the module and then receive a warning message,
remove the module to restore computer functionality, and then contact
technical support through Help and Support.
(4)
Vents (5)
Enable airflow to cool internal components.
computer fan starts up automatically to cool internal components
✎ The
and prevent overheating. It is normal for the internal fan to cycle on and
off during routine operation.
(5)
2–8
Hard drive bay
Holds the hard drive and the memory module slots.
CPQ Manual Title
3
Illustrated parts catalog
Service tag
When ordering parts or requesting information, provide the computer serial number and model number provided
on the service tag.
Item
Component
Description
1
Product name
This is the product name affixed to the front of the computer.
2
Serial number (s/n)
This is an alphanumeric identifier that is unique to each product.
3
Part number/Product number (p/n)
This number provides specific information about the product’s
hardware components. The part number helps a service
technician to determine what components and parts are needed.
4
Model description
This is the alphanumeric identifier used to locate documents,
drivers, and support for the computer.
5
Warranty period
This number describes the duration of the warranty period for
the computer.
3–1
Illustrated parts catalog
Computer major components
3–2
Illustrated parts catalog
Item
Description
Spare Part Number
(1)
Display assembly (includes two WLAN antenna transceivers and cables, microphone, nameplate, and logo):
For use only with CQ35 computer models:
■ 13.3-in BrightView display assembly for use only with computer models equipped
with webcam
531798-001
■ 13.3-in BrightView display assembly for use only with computer models not equipped
with webcam
531799-001
■ 13.4-in BrightView display assembly
586634-001
For use only with CQ36 computer models:
■ 13.3-in BrightView display assembly for use only with computer models equipped
with webcam
593023-001
■ 13.3-in BrightView display assembly for use only with computer models not equipped
with webcam
593024-001
■ 13.4-in BrightView display assembly for use only with computer models equipped
with webcam
603721-001
■ 13.4-in BrightView display assembly for use only with computer models not equipped
with webcam
601955-001
“Display assembly subcomponents” on page 13 for display assembly internal component spare
✎ See
part information.
(2)
(3)
Keyboard cover (includes power button board and cable):
For use only with CQ35 computer models
531819-001
For use only with CQ36 computer models
591435-001
Keyboard for use only with CQ35 computer models (includes keyboard cable):
■ For use in South Korea
531774-AB1
■ For use in Taiwan
531774-AB1
■ For use in Thailand
531774-281
■ For use in the United States
531774-001
Keyboard for use only with CQ36 computer models (includes keyboard cable):
■ For use in South Korea
530643-AD1
■ For use in Taiwan
530643-AB1
■ For use in Thailand
530643-281
■ For use in the United States
530643-001
Speaker assembly, includes:
534435-001
(4a)
Left speaker and cable
(4b)
Right speaker and cable
(5)
Top cover (includes TouchPad on/off board and cable, TouchPad button board and cable, and TouchPad board
and cable):
For use only with computer models equipped with fingerprint reader board (includes
fingerprint reader board cable)
531824-001
For use only with computer models not equipped with fingerprint reader board
531825-001
Continued
3–3
Illustrated parts catalog
Item
Description
Spare Part Number
Plastics Kit, includes:
535521-001
(6a)
ExpressCard slot bezel
(6b)
Wireless module compartment cover
(6c)
Hard drive cover
✎ See “Plastics Kit” on page 14 for more Plastics Kit spare part information.
(7)
Fingerprint reader board (includes cable)
531828-001
(8)
LED board (includes cable)
531826-001
(9)
Bluetooth module
✎ The Bluetooth module spare part kit does not include a Bluetooth module cable.
(10)
(11)
For use only with CQ35 computer models
483113-001
For use only with CQ36 computer models
537921-001
Bluetooth module cable
For use only with CQ35 computer models
534436-001
For use only with CQ36 computer models
591417-001
Audio board (includes cable)
For use only with CQ35 computer models
531812-001
For use only with CQ36 computer models
593025-001
(12)
USB board (includes cable)
531809-001
(13)
Power connector and cable
531810-001
(14)
System board for use only with CQ35 computer models (includes replacement thermal material):
■ For use only with CQ35-101-299 computer models equipped with discrete memory
graphics subsystems
538765-002
■ For use only with CQ35-101-299 computer models equipped with UMA memory graphics
subsystems
538766-001
■ For use only with CQ35-301-499 computer models equipped with discrete memory
graphics subsystems
576797-001
■ For use only with CQ35-301-499 computer models equipped with UMA memory graphics
subsystems
576798-001
System board for use only with CQ36 computer models (includes replacement thermal
material):
■ For use only with computer models equipped with UMA memory graphics subsystems
591415-001
■ For use only with computer models equipped with discrete memory graphics subsystems 591416-001
Continued
3–4
Illustrated parts catalog
Item
Description
(15)
Processor (includes replacement thermal material):
Spare Part Number
Intel Core2 Duo processors for use only with CQ35 computer models:
■ T9900 3.06-GHz processor (6-MB L2 cache, 1066-MHz FSB)
570434-001
■ T9800 2.93-GHz processor (6-MB L2 cache, 1066-MHz FSB)
507951-001
■ T9600 2.80-GHz processor (6-MB L2 cache, 1066-MHz FSB)
507952-001
■ T9550 2.66-GHz processor (6-MB L2 cache, 1066-MHz FSB)
507953-001
■ P8800 2.66-GHz processor (3-MB L2 cache, 1066-MHz FSB)
570036-001
■ P8700 2.53-GHz processor (3-MB L2 cache, 1066-MHz FSB)
507960-001
■ P8600 2.40-GHz processor (3-MB L2 cache, 1066-MHz FSB)
507963-001
■ P7550 2.26-GHz processor (3-MB L2 cache, 1066-MHz FSB)
573076-001
■ T6600 2.20-GHz processor (6-MB L2 cache, 1066-MHz FSB)
513593-001
■ P7450 2.13-GHz processor (3-MB L2 cache, 1066-MHz FSB)
507965-001
■ T6500 2.10-GHz processor (6-MB L2 cache, 1066-MHz FSB)
572928-001
■ T6400 2.06-GHz processor (6-MB L2 cache, 1066-MHz FSB)
513592-001
■ P7350 2.00-GHz processor (3-MB L2 cache, 1066-MHz FSB)
507967-001
Intel Pentium processors for use only with CQ35 computer models:
■ T4400 2.20-GHz processor (1-MB L2 cache, 800-MHz FSB)
584296-001
■ T4300 2.10-GHz processor (1-MB L2 cache, 800-MHz FSB)
572929-001
■ T4200 2.00-GHz processor (1-MB L2 cache, 800-MHz FSB)
513599-001
■ T3100 1.90-GHz processor (1-MB L2 cache, 800-MHz FSB)
572925-001
■ T3000 1.80-GHz processor (1-MB L2 cache, 800-MHz FSB)
572926-001
Intel Celeron processor for use only with CQ35 computer models:
■ T1600 1.66-GHz processor (1-MB L2 cache, 667-MHz FSB)
532324-001
Intel Core i5 processors, Dual Core for use only with CQ36 computer models:
■ 540M Dual Core processor, 2.53-GHz (Turbo up to 3.06) (3-MB L3 cache, 4 threads)
594646-001
■ 520M Dual Core processor, 2.40-GHz (Turbo up to 3.06) (3-MB L3 cache, 4 threads)
594645-001
■ 430M Dual Core processor, 2.26-GHz (Turbo up to 2.53) (3-MB L3 cache, 4 threads)
595585-001
Intel Core i3 processors, Dual Core for use only with CQ36 computer models:
(16)
■ 350M Dual Core processor, 2.26-GHz (3-MB L3 cache, 4 threads)
595586-001
■ 330M Dual Core processor, 2.13-GHz (3-MB L3 cache, 4 threads)
595587-001
Fan/heat sink assembly (includes replacement thermal material):
For use only with CQ35 computer models equipped with:
■ Graphics subsystems with discrete memory
531814-001
■ Graphics subsystems with UMA memory
531813-001
For use only with CQ36 computer models equipped with:
■ Graphics subsystems with discrete memory
591431-001
■ Graphics subsystems with UMA memory
591430-001
Continued
3–5
Illustrated parts catalog
Item
Description
(17)
Optical drive (includes bezel and bracket):
Spare Part Number
For use only with CQ35 computer models:
■ Blu-ray ROM DVD±R/RW SuperMulti DL Drive with LightScribe
534988-001
■ Blu-ray ROM DVD±R/RW SuperMulti DL Drive
534987-001
■ DVD±RW and CD-RW SuperMulti Double-Layer Drive with LightScribe
534986-001
For use only with CQ36 computer models:
(18)
(19)
(20)
■ Blu-ray ROM DVD±R/RW SuperMulti DL Drive with LightScribe
591530-001
■ DVD±RW and CD-RW SuperMulti Double-Layer Drive with LightScribe
591529-001
Base enclosure (includes six rubber feet)
534437-001
Rubber Feet Kit (not illustrated, includes six rubber feet)
537202-001
Battery:
■ 9-cell, 2.55-Ah (83-Wh) Li-ion battery
530803-001
■ 6-cell, 2.55-Ah (55-Wh) Li-ion battery
530802-001
■ 6-cell, 2.20-Ah (47-Wh) Li-ion battery
530801-001
WLAN modules:
For use only with CQ35 computer models:
■ Broadcom 4322AGN 802.11a/b/g/n WLAN module for use in Afghanistan, Albania,
Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia,
Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium,
Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil,
the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia,
Cameroon, Cape Verde, the Central African Republic, Chad, Colombia, Comoros,
the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti,
Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador,
Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana,
Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe,
Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary,
Iceland, India, Indonesia, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Japan, Jordan,
Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho,
Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi,
Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania,
Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique,
Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua,
Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay,
the People's Republic of China, Peru, the Philippines, Poland, Portugal, Qatar,
the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino,
Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone,
Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South Korea,
Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines,
Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan, Tajikistan, Tanzania,
Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu,
Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan,
Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
504664-002
Continued
3–6
Illustrated parts catalog
Item
Description
(20)
WLAN modules (continued)
Spare Part Number
■ Atheros 9285G 802.11b/g WiFi Adapter for use in only in Afghanistan, Albania, Algeria,
Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria,
Azerbaijan, the Bahamas, Bahrain, Barbados, Belgium, Belize, Benin, Bermuda, Bhutan,
Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria,
Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, the Central African Republic,
Chad, Chile, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech
Republic, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El
Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French
Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada,
Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong,
Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Japan,
Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon,
Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar,
Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania,
Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique,
Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua,
Niger, Nigeria, Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, the
People’s Republic of China, Peru, the Philippines, Poland, Portugal, the Republic of
Moldova, Romania, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi
Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia,
the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and
Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden,
Switzerland, Syria, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago,
Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, the United Arab Emirates, the United
Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia,
and Zimbabwe
518436-002
■ Intel WiFi Link 5100 802.11a/b/g/n WLAN module for use in all countries and regions
except Pakistan, Russia, and the Ukraine
480985-001
■ Broadcom 4312G 802.11a/b/g WLAN module for use in Afghanistan, Albania, Algeria,
Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria,
Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize,
Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil,
the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia,
Cameroon, Cape Verde, the Central African Republic, Chad, Colombia, Comoros,
the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti,
Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador,
Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana,
Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe,
Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary,
Iceland, India, Indonesia, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Japan, Jordan,
Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho,
Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi,
Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania,
Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique,
Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua,
Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay,
the People's Republic of China, Peru, the Philippines, Poland, Portugal, Qatar,
the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino,
Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone,
Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South Korea,
Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines,
Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan, Tajikistan, Tanzania,
Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu,
Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan,
Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
504593-002
Continued
3–7
Illustrated parts catalog
Item
Description
(20)
WLAN modules (continued)
Spare Part Number
■ Broadcom 4311AG 802.11a/b/g WLAN module for use in only in Afghanistan, Albania,
Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia,
Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belgium, Belize,
Benin, Bermuda, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin
Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde, the Cayman
Islands, the Central African Republic, Chad, Chile, Colombia, Comoros, the Congo,
Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the
Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea,
Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia,
Germany, Ghana, Gibraltar, Greece, Guadeloupe, Guam, Guatemala, Guinea,
Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland,
Italy, the Ivory Coast, Jamaica, Jordan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia,
Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar,
Malawi, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania,
Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique,
Namibia, Nauru, Nepal, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria,
Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay, the People's
Republic of China, Peru, the Philippines, Poland, Portugal, Puerto Rico, the Republic of
Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe,
Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia,
Slovenia, the Solomon Islands, Somalia, South Africa, Spain, Sri Lanka, St. Kitts and
Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden,
Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia,
Turkey, Turkmenistan, Tuvalu, Uganda, the United Arab Emirates, the United Kingdom,
Uruguay, Uzbekistan, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
504593-004
■ Broadcom 4322 AGN 802.11a/b/g WLAN module for use in only in Afghanistan, Albania,
Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia,
Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium,
Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the
British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde,
the Central African Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa Rica,
Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican
Republic, East Timor, Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia,
Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany,
Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau,
Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the
Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia,
Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia,
Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands,
Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro,
Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands,
New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama,
Papua New Guinea, Paraguay, the People's Republic of China, Peru, the Philippines,
Poland, Portugal, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San
Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra
Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa,
South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the
Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania,
Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda,
Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu,
Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
518434-002
■ Intel WiFi Link 5100 802.11a/b/g WLAN module for use only with Pakistan, Russia,
and the Ukraine
482957-001
Continued
3–8
Illustrated parts catalog
Item
Description
(20)
WLAN modules (continued)
■ Intel Wi-Fi Link 1000, 802.11b/g/n WLAN module for use in Andorra, Antigua and
Barbuda, Argentina, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Barbados,
Belgium, Bolivia, Bosnia and Herzegovina, Brazil, Brunei, Bulgaria, Canada, Cayman
Islands, Chile, China, Colombia, Costa Rica, Croatia, Cyprus, the Czech Republic,
Denmark, the Dominican Republic, Ecuador, Egypt, El Salvador, Estonia, Finland,
France, French Guiana, Guadeloupe, Guam, Georgia, Germany, Ghana, Greece,
Guatemala, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland,
Israel, Italy, Ivory Coast, Jamaica, Japan, Jordan, Kenya, Kuwait, Kyrgyzstan, Latvia,
Lebanon, Liechtenstein, Lithuania, Luxembourg, Malawi, Malaysia, Malta, Martinique,
Mauritius, Mexico, Monaco, Montenegro, Morocco, the Nether Antilles, the Netherlands,
New Zealand, Nicaragua, Nigeria, Oman, Pakistan, Panama, Paraguay, Peru, the
Philippines, Poland, Portugal, Puerto Rico, Qatar, Romania, San Marino, Saudi Arabia,
Senegal, Singapore, Slovakia, Slovenia, South Africa, South Korea, Spain, Sri Lanka,
Sweden, Switzerland, Taiwan, Tanzania, Thailand, Trinidad and Tobago, Turkey, United
Arab Emirates, the United Kingdom, the United States, Uruguay, the U.S. Virgin Islands,
Venezuela, and Vietnam
Spare Part Number
572520-001
For use only with CQ35 and CQ36 computer models:
■ Atheros 9280AGN 802.11a/b/g/n WiFi Adapter for use in Canada, the Cayman Islands,
Guam, Puerto Rico, the United States, and the U.S. Virgin Islands for use in Afghanistan,
Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba,
Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Barbados, Belgium, Belize, Benin,
Bermuda, Bhutan, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands,
Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, the Central
African Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa Rica, Croatia,
Cyprus, the Czech Republic, Djibouti, Dominica, the Dominican Republic, East Timor,
Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland,
France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece,
Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras,
Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, the Ivory Coast,
Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia,
Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia,
Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands,
Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro,
Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands,
New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Palau, Panama, Papua New
Guinea, Paraguay, the People’s Republic of China, Peru, the Philippines, Poland,
Portugal, the Republic of Moldova, Romania, Rwanda, Samoa, San Marino, Sao Tome
and Principe, Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore,
Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri
Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname,
Swaziland, Sweden, Switzerland, Syria, Taiwan, Tajikistan, Tanzania, Togo, Tonga,
Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, the United Arab
Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam,
Yemen, Zaire, Zambia, and Zimbabwe
518437-002
For use only with CQ36 computer models:
Atheros 9285G 802.11b/g/n WiFi Adapter for use only with Canada, Cayman Islands,
Guam, Puerto Rico, the United States, and the U.S. Virgin Islands
580101-001
Continued
3–9
Illustrated parts catalog
Item
Description
(20)
WLAN modules (continued)
Spare Part Number
Atheros 9285G 802.11b/g/n WiFi Adapter for use in Afghanistan, Albania, Algeria, Andorra,
Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan,
the Bahamas, Bahrain, Barbados, Belgium, Belize, Benin, Bermuda, Bhutan, Bosnia and
Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso,
Burundi, Cambodia, Cameroon, Cape Verde, Central African Republic, Chad, Chile, the
People’s Republic of China, Colombia, Comoros, Congo, Costa Rica, Croatia, Cyprus, the
Czech Republic, Denmark, Djibouti, Dominica, Dominican Republic, East Timor, Ecuador,
Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France,
French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada,
Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong,
Hungary, Iceland, India, Indonesia, Ireland, Italy, Ivory Coast, Jamaica, Japan, Jordan,
Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia,
Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia,
Martinique, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico,
Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Naira,
Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria,
Norway, Oman, Palau, Panama, Papua New Guinea, Paraguay, Peru, the Philippines,
Poland, Portugal, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino,
Sao Tome and Principe, Saudi Arabia, Senegal, Serbia and Montenegro, Seychelles, Sierra
Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa, South
Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent & Grenadine, Suriname,
Swaziland, Sweden, Switzerland, Syria, Taiwan, Tajikistan, Tanzania, Thailand, Togo,
Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, the United
Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam,
Yemen, Zaire, Zambia, and Zimbabwe
580101-002
Atheros 9280AGN 802.11a/b/g/draft-n WiFi Adapter for use in Canada, the Cayman Islands,
Guam, Puerto Rico, the United States, and the U.S. Virgin Islands
580102-001
Intel Wi-Fi Link 1000 WLAN module for use in Andorra, Antigua & Barbuda, Aruba,
Australia, Argentina. Austria, Azerbaijan, Bahamas, Bahrain, Barbados, Belgium, Bermuda,
Bolivia, Bosnia & Herzegovina, Brazil, Brunei, Bulgaria, Canada, Cayman Islands, Chile, the
People’s Republic of China, Columbia, Costa Rica, Croatia, Czech Republic, Denmark,
Dominican Republic, Ecuador, Egypt, El Salvador, Estonia, Finland, France, French Guiana,
Georgia, Germany, Ghana, Greece, Guam, Guadeloupe, Guatemala, Haiti, Honduras,
Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, Ivory Coast, Jamaica,
Japan, Jordan, Kenya, South Korea, Kuwait, Kyrgyzstan, Latvia, Lebanon, Liechtenstein,
Lithuania, Luxembourg, Malawi, Malaysia, Malta, Martinique, Mauritius, Mexico, Monaco,
Montenegro, Morocco, the Netherlands, Nether Antilles, New Zealand, Nicaragua, Nigeria,
Norway, Oman, Pakistan, Panama, Paraguay, Peru, the Philippines, Poland, Portugal,
Puerto Rico, Qatar, Romania, San Marino, Saudi Arabia, Senegal, Singapore, Slovakia,
Slovenia, South Africa, Spain, Sri Lanka, Sweden, Switzerland, Taiwan, Tanzania, Thailand,
Trinidad and Tobago, Turkey, Ukraine, United Arab Emirates, the United Kingdom, the
United States, U.S. Virgin Islands, Uruguay, Venezuela, and Vietnam
593030-001
Intel Wi-Fi Link 1000 for use for use in Russia and the Ukraine
593031-001
Continued
3–10
Illustrated parts catalog
Item
Description
(20)
WLAN modules (continued)
Spare Part Number
Broadcom 43225 802.11b/g/n 2x2 WiFi Adapter for use in Antigua & Barbuda, Angola,
Argentina, Aruba, Australia, Armenia, Afghanistan, Bolivia, Albania, Andorra, Algeria,
Austria, Belgium, Belarus, Belize, Bhutan, Benin, Bahamas, Azerbaijan, Bahrain, Barbados,
Bangladesh, Bermuda, British Virgin Islands, Burundi, Burkina Faso, Botswana, Bosnia &
Herzegovina, Brazil, Bulgaria, Brunei, Cambodia, Cameroon, Canada, Cape Verde, the
Cayman Islands, Central African Republic, Chad, Chile, the People’s Republic of China,
Colombia, Comoros, Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Djibouti,
Denmark, Dominica, the Dominican Republic, East Timor, Ecuador, El Salvador, Egypt,
Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon,
Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guam,
Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary,
Iceland, India, Indonesia, Ivory Coast, Iraq, Ireland, Italy, Israel, Jamaica, Japan, Jordan,
Kazakhstan, Kenya, Kiribati, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein,
Lithuania, Luxembourg, Macedonia, Madagascar, Mali, Malta, Marshall Islands, Malawi,
Malaysia, Maldives, Republic of Moldova, Martinique, Mauritius, Monaco, Kuwait,
Kyrgyzstan, Mauritania, Mexico, Micronesia, Mongolia, Morocco, Mozambique, Namibia,
Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand, Nicaragua, Nigeria,
Oman, Niger, Norway, Qatar, Pakistan, Palau, Panama, Papua New Guinea, Paraguay,
Peru, Philippines, Portugal, Poland, Puerto Rico, Romania, Russia, Rwanda, Samoa, San
Marino, Saudi Arabia, Sao Tome & Principe, Senegal, Seychelles, Serbia and Montenegro,
Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia, South Africa,
South Korea, Spain, Sri Lanka, St. Vincent the Grenadines, St. Lucia, St. Kitts & Nevis,
Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan, Tajikistan, Tanzania, Thailand,
Tonga, Trinidad and Tobago, Togo, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine,
Uruguay, the United Kingdom, the United Arab Emirates, the United States, the U.S. Virgin
Islands, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
593837-001
(21)
RTC battery (includes cable and double-sided tape)
531829-001
(22)
Memory modules (800-MHz, DDR2):
For use only with CQ35 computer models:
■ 2-GB
598858-001
■ 1-GB
598861-001
For use only with CQ36 computer models:
(23)
■ 2-GB
598856-001
■ 1-GB
598859-001
Hard drive (includes hard drive connector and hard drive bracket):
For use only with CQ35 computer models:
■ 500-GB, 7200-rpm
573738-001
■ 500-GB, 5400-rpm
530797-001
■ 320-GB, 7200-rpm
572085-001
■ 320-GB, 5400-rpm
530796-001
■ 250-GB, 7200-rpm
572084-001
■ 250-GB, 5400-rpm
530795-001
■ 160-GB, 7200-rpm
588057-001
Continued
3–11
Illustrated parts catalog
Item
Description
(23)
Hard drive (continued)
Spare Part Number
For use only with CQ36 computer models:
■ 500-GB, 7200-rpm
591423-001
■ 320-GB, 7200-rpm
591422-001
■ 250-GB, 7200-rpm
591421-001
For use only with CQ35 and CQ36 computer models:
3–12
■ 320-GB, 5400-rpm Mini-Pocket Media Drive hard drive
519218-001
■ 160-GB, 5400-rpm Mini-Pocket Media Drive hard drive
519217-001
■ 160-GB, solid-state drive
581404-001
Hard Drive Hardware Kit (not illustrated) (includes hard drive connector, hard drive
bracket, and screws)
534990-001
Solid-State Drive Mounting Kit
581405-001
Rubber hard drive bumpers (not illustrated)
539887-001
Illustrated parts catalog
Display assembly subcomponents
Item
Description
(1)
Display bezel
Spare part number
For use only with CQ35 computer models:
■ Equipped with a 13.3-inch display and a webcam
531800-001
■ Equipped with a 13.3-inch display without a webcam
531801-001
■ Equipped with a 13.4-inch display and a webcam
590307-001
For use only with CQ36 computer models:
(2)
(3)
■ Equipped with a 13.3-inch display and a webcam
591527-001
■ Equipped with a 13.3-inch display without a webcam
591528-001
■ Equipped with a 13.4-inch display and a webcam
603722-001
■ Equipped with a 13.4-inch display without a webcam
601956-001
Display hinges
For use in 13.3-inch displays
531803-001
For use in 13.4-inch displays
590308-001
High-Definition BrightView display panel
For use in computers with 13.3-inch displays
530782-001
For use in computers with 13.4-inch displays
530783-001
(4)
Display panel cable (includes webcam module cable)
531802-001
(5)
Wireless antenna set
531804-001
(6)
Webcam module
531805-001
(7)
Microphone (includes receiver and cable)
534438-001
(8)
Display enclosure
531806-001
3–13
Illustrated parts catalog
Plastics Kit
Item
3–14
Description
Spare part number
Plastics Kit:
535521-001
(1)
ExpressCard slot bezel
(2)
Hard drive cover (includes three captive screws, secured by C-clips)
(3)
Wireless module compartment cover (includes one captive screw, secured by a C-clip)
Illustrated parts catalog
Mass storage devices
Item
Description
(1)
Hard drive (includes hard drive connector and hard drive bracket):
Spare part number
For use only with CQ35 computer models:
■ 500-GB, 7200-rpm
573738-001
■ 500-GB, 5400-rpm
530797-001
■ 320-GB, 7200-rpm
572085-001
■ 320-GB, 5400-rpm
530796-001
■ 250-GB, 7200-rpm
572084-001
■ 250-GB, 5400-rpm
530795-001
■ 160-GB, 7200-rpm
588057-001
For use only with CQ36 computer models:
■ 500-GB, 7200-rpm
591423-001
■ 320-GB, 7200-rpm
591422-001
■ 250-GB, 7200-rpm
591421-001
For use only with CQ35 and CQ36 computer models:
■ 320-GB, 5400-rpm Mini-Pocket Media Drive hard drive
519218-001
■ 160-GB, 5400-rpm Mini-Pocket Media Drive hard drive
519217-001
■ 160-GB, solid-state drive
581404-001
Hard Drive Hardware Kit (includes hard drive connector, hard drive bracket,
and screws)
534990-001
Solid-State Drive Mounting Kit
581405-001
Rubber hard drive bumpers (not illustrated)
539887-001
3–15
Illustrated parts catalog
Item
Description
(2)
Optical drive (includes bezel and bracket):
Spare part number
For use only with CQ35 computer models:
■ Blu-ray ROM DVD±R/RW SuperMulti DL Drive with LightScribe
530800-001
■ Blu-ray ROM DVD±R/RW SuperMulti DL Drive
530799-001
■ DVD±RW and CD-RW SuperMulti Double-Layer Drive with LightScribe
530798-001
For use only with CQ36 computer models:
■ Blu-ray ROM DVD±R/RW SuperMulti DL Drive with LightScribe
591530-001
■ DVD±RW and CD-RW SuperMulti Double-Layer Drive with LightScribe
591529-001
Miscellaneous parts
Description
Spare part number
Wired headset with volume control
371693-001
ExpressCard remote control
465539-002
AC adapters:
■ 90-W PFC HP Smart Adapter
463955-001
■ 90-W non-PFC HP Smart Adapter
432309-001
■ 90-W PFC AC adapter (for use only with India)
535593-001
■ 65-W PFC HP Smart Adapter
463958-001
■ 65-W PFC AC adapter (for use only with India)
577170-001
Power cords:
3–16
■ For use in Australia
490371-011
■ For use in Brazil
490371-201
■ For use in Brazil
490371-202
■ For use in the People’s Republic of China
490371-AA1
■ For use in India
490371-D61
■ For use in South Korea
490371-AD1
■ For use in Taiwan and Thailand
490371-AB1
■ For use in the United Kingdom
490371-031
■ For use in the United States
490371-001
Illustrated parts catalog
Description
Spare part number
Screw Kit
■ Phillips PM3.0 × 4.0 screws
■ Phillips PM2.5 × 9.0 screws
■ Phillips PM2.5 × 7.0 screws
■ Phillips PM2.5 × 6.0 captive screws
■ Phillips PM2.5 × 6.0 screws
■ Phillips PM2.5 × 4.0 screws
■ Phillips PM2.0 × 9.0 screws
■ Phillips PM2.0 × 7.0 captive screws
■ Phillips PM2.0 × 5.0 screws
■ Phillips PM2.0 × 4.0 screws
■ Phillips PM2.0 × 3.0 screws
■ Phillips PM2.0 × 2.0 broadhead screws
531815-001
Sequential part number listing
Spare part number
Description
371693-001
Wired headset with volume control
432309-001
90-W PFC HP Smart Adapter
463955-001
90-W PFC HP Smart Adapter
463958-001
65-W PFC HP Smart Adapter
465539-002
ExpressCard remote control
480985-001
Intel WiFi Link 5100 802.11a/b/g/n WLAN module for use only with CQ35 computer models in all
countries and regions except Pakistan, Russia, and the Ukraine
482957-001
Intel WiFi Link 5100 802.11a/b/g WLAN module for use only with CQ35 computer models in
Pakistan, Russia, and the Ukraine
483113-001
Bluetooth module for use only with CQ35 computer models
Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth
✎ The
module cable for CQ35 computer models is available using spare part number 534436-001.
490371-001
Power cord for use in the United States
490371-011
Power cord for use in Australia
490371-031
Power cord for use in the United Kingdom
490371-201
Power cord for use in Brazil
490371-202
Power cord for use in Brazil
490371-AA1
Power cord for use in the People’s Republic of China
490371-AB1
Power cord for use in Taiwan and Thailand
490371-AD1
Power cord for use in South Korea
490371-D61
Power cord for use in India
(Continued)
3–17
Illustrated parts catalog
Spare part number
Description
504593-002
Broadcom 4312G 802.11a/b/g WLAN module for use in only with CQ35 computer models in
Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba,
Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium,
Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil,
the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Cape
Verde, the Central African Republic, Chad, Colombia, Comoros, the Congo, Costa Rica, Croatia,
Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor,
Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France,
French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada,
Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary,
Iceland, India, Indonesia, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Japan, Jordan, Kazakhstan,
Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein,
Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the
Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia,
Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands,
New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New
Guinea, Paraguay, the People's Republic of China, Peru, the Philippines, Poland, Portugal, Qatar,
the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe,
Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the
Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St.
Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan,
Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan,
Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan,
Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
504593-004
Broadcom 4311AG 802.11a/b/g WLAN module for use in only with CQ35 computer models in
Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba,
Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belgium, Belize,
Benin, Bermuda, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands,
Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde, the Cayman Islands, the Central
African Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the
Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt,
El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana,
Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Guadeloupe, Guam, Guatemala,
Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland,
Italy, the Ivory Coast, Jamaica, Jordan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lesotho, Liberia,
Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, the Maldives, Mali, Malta,
the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia,
Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Netherlands, New Zealand,
Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea,
Paraguay, the People's Republic of China, Peru, the Philippines, Poland, Portugal, Puerto Rico, the
Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe,
Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the
Solomon Islands, Somalia, South Africa, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent
and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Taiwan, Tajikistan, Tanzania,
Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, the United
Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Venezuela, Vietnam, Yemen, Zaire,
Zambia, and Zimbabwe
(Continued)
3–18
Illustrated parts catalog
Spare part number
Description
504664-002
Broadcom 4322AGN 802.11a/b/g/n WLAN module for use with only with CQ35 computer models in
Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba,
Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium,
Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil,
the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon, Cape
Verde, the Central African Republic, Chad, Colombia, Comoros, the Congo, Costa Rica, Croatia,
Cyprus, the Czech Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor,
Ecuador, Egypt, El Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France,
French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada,
Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary,
Iceland, India, Indonesia, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Japan, Jordan, Kazakhstan,
Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein,
Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the
Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia,
Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands,
New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New
Guinea, Paraguay, the People's Republic of China, Peru, the Philippines, Poland, Portugal, Qatar,
the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe,
Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the
Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St.
Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan,
Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan,
Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan,
Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
507951-001
Intel Core2 T9800 2.93-GHz processor for use in only with CQ35 computer models (6-MB L2 cache,
1066-MHz FSB, includes replacement thermal material)
507952-001
Intel Core2 T9600 2.80-GHz processor for use in only with CQ35 computer models (6-MB L2 cache,
1066-MHz FSB, includes replacement thermal material)
507953-001
Intel Core2 T9550 2.66-GHz processor for use in only with CQ35 computer models (6-MB L2 cache,
1066-MHz FSB, includes replacement thermal material)
507960-001
Intel Core2 P8700 2.53-GHz processor for use in only with CQ35 computer models (3-MB L2 cache,
1066-MHz FSB, includes replacement thermal material)
507963-001
Intel Core2 P8600 2.40-GHz processor for use in only with CQ35 computer models (3-MB L2 cache,
1066-MHz FSB, includes replacement thermal material)
507965-001
Intel Core2 P7450 2.13-GHz processor for use in only with CQ35 computer models (3-MB L2 cache,
1066-MHz FSB, includes replacement thermal material)
507967-002
Intel Core2 P7350 2.00-GHz processor for use in only with CQ35 computer models (3-MB L2 cache,
1066-MHz FSB, includes replacement thermal material)
513592-001
Intel Core2 T6400 2.06-GHz processor for use in only with CQ35 computer models (6-MB L2 cache,
1066-MHz FSB, includes replacement thermal material)
513593-001
Intel Core2 T6600 2.20-GHz processor for use in only with CQ35 computer models (6-MB L2 cache,
1066-MHz FSB, includes replacement thermal material)
513599-001
Intel Pentium T4200 2.00-GHz processor for use in only with CQ35 computer models (1-MB L2
cache, 800-MHz FSB, includes replacement thermal material)
(Continued)
3–19
Illustrated parts catalog
Spare part number
Description
518434-002
Broadcom 4322 AGN 802.11a/b/g WLAN module for use in only with CQ35 computer models in
Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba,
Australia, Austria, Azerbaijan, the Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium,
Belize, Benin, Bermuda, Bhutan, Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British
Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African
Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech
Republic, Denmark, Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El
Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon,
Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea,
Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy,
the Ivory Coast, Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon,
Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia,
the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico,
Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the
Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan,
Palau, Panama, Papua New Guinea, Paraguay, the People's Republic of China, Peru, the
Philippines, Poland, Portugal, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San
Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone,
Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri
Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland,
Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia,
Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom,
Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
518436-002
Atheros 9285G 802.11b/g WiFi Adapter for use in only with CQ35 computer models in Afghanistan,
Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia,
Austria, Azerbaijan, the Bahamas, Bahrain, Barbados, Belgium, Belize, Benin, Bermuda, Bhutan,
Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina
Faso, Burundi, Cambodia, Cameroon, Cape Verde, the Central African Republic, Chad, Chile,
Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Djibouti,
Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea,
Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany,
Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana,
Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, the Ivory
Coast, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia,
Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi,
Malaysia, the Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico,
Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the
Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Palau,
Panama, Papua New Guinea, Paraguay, the People’s Republic of China, Peru, the Philippines,
Poland, Portugal, the Republic of Moldova, Romania, Rwanda, Samoa, San Marino, Sao Tome and
Principe, Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia,
Slovenia, the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and
Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Syria,
Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan,
Tuvalu, Uganda, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu,
Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
(Continued)
3–20
Illustrated parts catalog
Spare part number
Description
518437-002
Atheros 9280AGN 802.11a/b/g/n WiFi Adapter for use in Canada, the Cayman Islands, Guam,
Puerto Rico, the United States, and the U.S. Virgin Islands for use in Afghanistan, Albania, Algeria,
Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan,
the Bahamas, Bahrain, Barbados, Belgium, Belize, Benin, Bermuda, Bhutan, Bosnia and
Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi,
Cambodia, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, Colombia, Comoros,
the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Djibouti, Dominica, the Dominican
Republic, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia,
Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece,
Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong,
Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Japan, Jordan,
Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia,
Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives,
Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco,
Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the
Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Palau, Panama, Papua New
Guinea, Paraguay, the People’s Republic of China, Peru, the Philippines, Poland, Portugal, the
Republic of Moldova, Romania, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi
Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon
Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St.
Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan, Tajikistan,
Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, the
United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam,
Yemen, Zaire, Zambia, and Zimbabwe
519217-001
160-GB, 5400-rpm Mini-Pocket Media Drive (PMD) hard drive
519218-001
320-GB, 5400-rpm Mini-Pocket Media Drive (PMD) hard drive
530643-001
Keyboard without backlight with molded finish for use only with CQ36 computer models with black
trim in the United States (includes keyboard cable)
530643-281
Keyboard without backlight with molded finish for use only with CQ36 computer models with black
trim in Thailand (includes keyboard cable)
530643-AB1
Keyboard without backlight with molded finish for use only with CQ36 computer models with black
trim in Taiwan (includes keyboard cable)
530643-AD1
Keyboard without backlight with molded finish for use only with CQ36 computer models with black
trim in South Korea (includes keyboard cable)
530782-001
13.3-in, SVA, High-Definition BrightView display panel
530783-001
13.4-in, SVA, High-Definition BrightView display panel for use only with CQ35 computer models
530795-001
250-GB, 5400-rpm hard drive for use only CQ35 computer models (includes hard drive connector
and hard drive bracket)
530796-001
320-GB, 5400-rpm hard drive for use only CQ35 computer models (includes hard drive connector
and hard drive bracket)
530797-001
500-GB, 5400-rpm hard drive for use only CQ35 computer models (includes hard drive connector
and hard drive bracket)
530801-001
6-cell, 2.20-Ah (47-Wh) Li-ion battery
530802-001
6-cell, 2.55-Ah (55-Wh) Li-ion battery
530803-001
9-cell, 2.55-Ah (83-Wh) Li-ion battery
531774-001
Keyboard for use only with CQ35 computer models in the United States (includes keyboard cable)
531774-281
Keyboard for use only with CQ35 computer models in Thailand (includes keyboard cable)
531774-AB1
Keyboard for use only with CQ35 computer models in Taiwan (includes keyboard cable)
531774-AD1
Keyboard for use only with CQ35 computer models in South Korea (includes keyboard cable)
(Continued)
3–21
Illustrated parts catalog
Spare part number
Description
531798-001
13.3-in BrightView display assembly for use only with CQ35 computer models equipped with a
webcam (includes two WLAN antenna transceivers and cables, microphone, nameplate, and logo)
531799-001
13.3-in BrightView display assembly for use only with CQ35 computer models not equipped with a
webcam (includes two WLAN antenna transceivers and cables, microphone, nameplate, and logo)
531800-001
Display bezel for use only with CQ35 computer models equipped with a 13.3-inch display and a
webcam
531801-001
Display bezel for use only with CQ35 computer models not equipped with a webcam
531802-001
Display panel cable (includes webcam module cable)
531803-001
Display hinges for use only with 13.3-inch displays
531804-001
Wireless antenna set
531805-001
Webcam module
531806-001
Display enclosure
531809-001
USB board (includes USB board cable)
531810-001
Power connector and cable
531812-001
Audio board for use only with CQ35 computer models (includes audio board cable)
531813-001
Fan/heat sink assembly for use only with CQ35 computer models equipped with graphics
subsystems with UMA memory (includes replacement thermal material)
531814-001
Fan/heat sink assembly for use only with CQ35 computer models equipped with graphics
subsystems with discrete memory (includes replacement thermal material)
531815-001
Screw Kit
531819-001
Keyboard cover for use only with CQ35 computer models (includes power button board and cable)
531824-001
Top cover with fingerprint reader (includes fingerprint reader board cable)
531825-001
Top cover without fingerprint reader board (includes fingerprint reader board cable)
531826-001
LED board (includes LED board cable)
531828-001
Fingerprint reader board (includes fingerprint reader board cable)
531829-001
RTC battery (includes RTC battery cable and double-sided tape)
532324-001
Intel Celeron T1600 1.66-GHz processor for use only with CQ35 computer models (1-MB L2 cache,
667-MHz FSB, includes replacement thermal material)
534435-001
Speaker assembly (includes left and right speakers and speaker cables)
534436-001
Bluetooth module cable for use only with CQ35 computer models
534437-001
Base enclosure (includes six rubber feet)
534438-001
Microphone (includes receiver and cable)
534986-001
DVD±RW and CD-RW SuperMulti Double-Layer Drive with LightScribe for use only with CQ35
computer models
534987-001
Blu-ray ROM DVD±R/RW SuperMulti DL Drive for use only with CQ35 computer models
534988-001
Blu-ray ROM DVD±R/RW SuperMulti DL Drive with LightScribe for use only with CQ35 computer models
534990-001
Hard Drive Hardware Kit (includes hard drive connector, hard drive bracket, and screws)
535521-001
Plastics Kit
535593-001
537202-001
✎ See “Plastics Kit” on page 14 for more Plastics Kit spare part information.
90-W PFC AC adapter (for use only with India)
Rubber Feet Kit (includes six rubber feet)
(Continued)
3–22
Illustrated parts catalog
Spare part number
Description
537921-001
Bluetooth module for use only with CQ36 computer models
538765-002
System board for use only with CQ35-101-299 computer models equipped with discrete memory
graphics subsystems (includes replacement thermal material)
538766-001
System board for use only with CQ35-101-299 computer models equipped with graphics
subsystems with UMA memory (includes replacement thermal material)
539887-001
Rubber hard drive bumpers
570036-001
Intel Core P8700 2.53-GHz processor for use only with CQ35 computer models (3-MB L2 cache,
1066-MHz FSB, includes replacement thermal material)
570434-001
Intel Core T9900 3.06-GHz processor for use only with CQ35 computer models (6-MB L2 cache,
1066-MHz FSB, includes replacement thermal material)
572084-001
250-GB, 7200-rpm hard drive for use only with CQ35 computer models (includes hard drive
connector and hard drive bracket)
572085-001
320-GB, 7200-rpm hard drive for use only with CQ35 computer models (includes hard drive
connector and hard drive bracket)
572520-001
Intel Wi-Fi Link 1000, 802.11b/g/n WLAN module for use only with CQ35 computer models in
Andorra, Antigua and Barbuda, Argentina, Aruba, Australia, Austria, Azerbaijan, the Bahamas,
Barbados, Belgium, Bolivia, Bosnia and Herzegovina, Brazil, Brunei, Bulgaria, Canada, Cayman
Islands, Chile, China, Colombia, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, the
Dominican Republic, Ecuador, Egypt, El Salvador, Estonia, Finland, France, French Guiana,
Guadeloupe, Guam, Georgia, Germany, Ghana, Greece, Guatemala, Haiti, Honduras, Hong Kong,
Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, Ivory Coast, Jamaica, Japan, Jordan,
Kenya, Kuwait, Kyrgyzstan, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg, Malawi,
Malaysia, Malta, Martinique, Mauritius, Mexico, Monaco, Montenegro, Morocco, the Nether Antilles,
the Netherlands, New Zealand, Nicaragua, Nigeria, Oman, Pakistan, Panama, Paraguay, Peru, the
Philippines, Poland, Portugal, Puerto Rico, Qatar, Romania, San Marino, Saudi Arabia, Senegal,
Singapore, Slovakia, Slovenia, South Africa, South Korea, Spain, Sri Lanka, Sweden, Switzerland,
Taiwan, Tanzania, Thailand, Trinidad and Tobago, Turkey, United Arab Emirates, the United
Kingdom, the United States, Uruguay, the U.S. Virgin Islands, Venezuela, and Vietnam
572925-001
Intel Pentium T3100 1.90-GHz processor for use only with CQ35 computer models (1-MB L2 cache,
800-MHz FSB, includes replacement thermal material)
572926-001
Intel Pentium T3000 1.80-GHz processor for use only with CQ35 computer models (1-MB L2 cache,
800-MHz FSB, includes replacement thermal material)
572928-001
Intel Core T6500 2.10-GHz processor for use only with CQ35 computer models (6-MB L2 cache,
1066-MHz FSB, includes replacement thermal material)
572929-001
Intel Pentium T4300 2.10-GHz processor for use only with CQ35 computer models (1-MB L2 cache,
800-MHz FSB, includes replacement thermal material)
573076-001
Intel Core P7550 2.26-GHz processor for use only with CQ35 computer models (3-MB L2 cache,
1066-MHz FSB, includes replacement thermal material)
573738-001
500-GB, 7200-rpm hard drive for use only with CQ35 computer models (includes hard drive
connector and hard drive bracket)
576797-001
System board for use only with CQ35-301-499 computer models equipped with discrete graphics
(includes replacement thermal material)
576798-001
System board for use only with CQ35-301-499 computer models equipped with UMA graphics
(includes replacement thermal material)
577170-001
65-W PFC AC adapter (for use only with India)
580101-001
Atheros 9285G 802.11b/g/n WiFi Adapter for use only with CQ36 computer models in Canada,
Cayman Islands, Guam, Puerto Rico, the United States, and the U.S. Virgin Islands
(Continued)
3–23
Illustrated parts catalog
Spare part number
Description
580101-002
Atheros 9285G 802.11b/g/n WiFi Adapter for use only with CQ36 computer models in Afghanistan,
Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia,
Austria, Azerbaijan, the Bahamas, Bahrain, Barbados, Belgium, Belize, Benin, Bermuda, Bhutan,
Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina
Faso, Burundi, Cambodia, Cameroon, Cape Verde, Central African Republic, Chad, Chile, the
People’s Republic of China, Colombia, Comoros, Congo, Costa Rica, Croatia, Cyprus, the Czech
Republic, Denmark, Djibouti, Dominica, Dominican Republic, East Timor, Ecuador, Egypt, El
Salvador, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon,
Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea,
Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland,
Italy, Ivory Coast, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos,
Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar,
Malawi, Malaysia, Martinique, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico,
Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Naura, Nepal, the
Nether Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Palau,
Panama, Papua New Guinea, Paraguay, Peru, the Philippines, Poland, Portugal, the Republic of
Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia,
Senegal, Serbia and Montenegro, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia,
Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St.
Lucia, St. Vincent & Grenadine, Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan,
Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan,
Tuvalu, Uganda, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu,
Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
580102-001
Atheros 9280AGN 802.11a/b/g/draft-n WiFi Adapter for use only with CQ36 computer models in
Canada, the Cayman Islands, Guam, Puerto Rico, the United States, and the U.S. Virgin Islands
581404-001
160-GB, solid-state drive
581405-001
Solid-state drive mounting kit
584296-001
Intel Pentium T4400 2.20-GHz processor for use only with CQ35 computer models (1-MB L2 cache,
800-MHz FSB, includes replacement thermal material)
586634-001
13.4-inch BrightView display assembly for use only with CQ35 computer models (includes two
WLAN antenna transceivers and cables, microphone, nameplate, and logo)
588057-001
160-GB, 7200-rpm hard drive (includes hard drive connector and hard drive bracket)
590307-001
Display bezel for use only on CQ35 computer models equipped with a 13.4-inch display and a
webcam
590308-001
Display hinges for use only with computer models equipped with 13.4-inch displays
591415-001
System board for use only with CQ36 computer models equipped with UMA graphics (includes
replacement thermal material)
591416-001
System board for use only with CQ36 computer models equipped with discrete graphics (includes
replacement thermal material)
591417-001
Bluetooth cable for use in only CQ36 computer models
591421-001
250-GB, 7200-rpm hard drive for use only with CQ36 computer models (includes hard drive
connector and hard drive bracket)
591422-001
320-GB, 7200-rpm hard drive for use only with CQ36 computer models (includes hard drive
connector and hard drive bracket)
591423-001
500-GB, 7200-rpm hard drive for use only with CQ36 computer models (includes hard drive
connector and hard drive bracket)
591430-001
Fan/heat sink assembly for use only with CQ36 computer models equipped with UMA graphics
memory (includes replacement thermal material)
591431-001
Fan/heat sink assembly for use only with CQ36 computer models equipped with discrete graphics
memory (includes replacement thermal material)
(Continued)
3–24
Illustrated parts catalog
Spare part number
Description
591435-001
Switch cover for use only on CQ36 computer models (includes power button board and cable)
591527-001
Display bezel for use only with CQ36 computer models with 13.3-inch displays with a webcam
591528-001
Display bezel for use only with CQ36 computer models with 13.3-inch displays without a webcam
591529-001
DVD±RW and CD-RW SuperMulti Double-Layer Drive with LightScribe for use only with CQ36
computer models
591530-001
Blu-ray ROM DVD±R/RW SuperMulti DL Drive with LightScribe for use only with CQ36 computer
models
593023-001
13.3-inch BrightView LED display assembly for use only with CQ36 computer models with a webcam
(includes two WLAN antenna transceivers and cables, microphone, nameplate, and logo)
593024-001
13.3-inch BrightView LED display assembly for use only with CQ36 computer models without a
webcam (includes two WLAN antenna transceivers and cables, microphone, nameplate, and logo)
593025-001
Audio board for use only with CQ36 computer models (includes cable)
593030-001
Intel Wi-Fi Link 1000 WLAN module for use only with CQ36 computer models in Andorra, Antigua &
Barbuda, Aruba, Australia, Argentina. Austria, Azerbaijan, Bahamas, Bahrain, Barbados, Belgium,
Bermuda, Bolivia, Bosnia & Herzegovina, Brazil, Brunei, Bulgaria, Canada, Cayman Islands, Chile,
the People’s Republic of China, Columbia, Costa Rica, Croatia, Czech Republic, Denmark,
Dominican Republic, Ecuador, Egypt, El Salvador, Estonia, Finland, France, French Guiana,
Georgia, Germany, Ghana, Greece, Guam, Guadeloupe, Guatemala, Haiti, Honduras, Hong Kong,
Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, Ivory Coast, Jamaica, Japan, Jordan,
Kenya, South Korea, Kuwait, Kyrgyzstan, Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg,
Malawi, Malaysia, Malta, Martinique, Mauritius, Mexico, Monaco, Montenegro, Morocco, the
Netherlands, Nether Antilles, New Zealand, Nicaragua, Nigeria, Norway, Oman, Pakistan, Panama,
Paraguay, Peru, the Philippines, Poland, Portugal, Puerto Rico, Qatar, Romania, San Marino, Saudi
Arabia, Senegal, Singapore, Slovakia, Slovenia, South Africa, Spain, Sri Lanka, Sweden,
Switzerland, Taiwan, Tanzania, Thailand, Trinidad and Tobago, Turkey, Ukraine, United Arab
Emirates, the United Kingdom, the United States, U.S. Virgin Islands, Uruguay, Venezuela, and
Vietnam
593031-001
Intel Wi-Fi Link 1000 for use for use only with CQ36 computer models in Russia and the Ukraine
593837-001
Broadcom 43225 802.11b/g/n 2x2 WiFi Adapter for use in Antigua & Barbuda, Angola, Argentina,
Aruba, Australia, Armenia, Afghanistan, Bolivia, Albania, Andorra, Algeria, Austria, Belgium,
Belarus, Belize, Bhutan, Benin, Bahamas, Azerbaijan, Bahrain, Barbados, Bangladesh, Bermuda,
British Virgin Islands, Burundi, Burkina Faso, Botswana, Bosnia & Herzegovina, Brazil, Bulgaria,
Brunei, Cambodia, Cameroon, Canada, Cape Verde, the Cayman Islands, Central African Republic,
Chad, Chile, the People’s Republic of China, Colombia, Comoros, Congo, Costa Rica, Croatia,
Cyprus, the Czech Republic, Djibouti, Denmark, Dominica, the Dominican Republic, East Timor,
Ecuador, El Salvador, Egypt, Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France,
French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada,
Guadeloupe, Guam, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong,
Hungary, Iceland, India, Indonesia, Ivory Coast, Iraq, Ireland, Italy, Israel, Jamaica, Japan, Jordan,
Kazakhstan, Kenya, Kiribati, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania,
Luxembourg, Macedonia, Madagascar, Mali, Malta, Marshall Islands, Malawi, Malaysia, Maldives,
Republic of Moldova, Martinique, Mauritius, Monaco, Kuwait, Kyrgyzstan, Mauritania, Mexico,
Micronesia, Mongolia, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the
Netherlands, New Zealand, Nicaragua, Nigeria, Oman, Niger, Norway, Qatar, Pakistan, Palau,
Panama, Papua New Guinea, Paraguay, Peru, Philippines, Portugal, Poland, Puerto Rico, Romania,
Russia, Rwanda, Samoa, San Marino, Saudi Arabia, Sao Tome & Principe, Senegal, Seychelles,
Serbia and Montenegro, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia,
South Africa, South Korea, Spain, Sri Lanka, St. Vincent the Grenadines, St. Lucia, St. Kitts & Nevis,
Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan, Tajikistan, Tanzania, Thailand, Tonga,
Trinidad and Tobago, Togo, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, Uruguay, the
United Kingdom, the United Arab Emirates, the United States, the U.S. Virgin Islands, Uzbekistan,
Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
594645-001
Intel Core i5 520M Dual Core processor, 2.40-GHz (Turbo up to 3.06) for use only with CQ36
computer models (3-MB L3 cache, 4 threads, includes replacement thermal material)
(Continued)
3–25
Illustrated parts catalog
3–26
Spare part number
Description
594646-001
Intel Core i5 540M Dual Core processor, 2.53-GHz (Turbo up to 3.06) for use only with CQ36
computer models (3-MB L3 cache, 4 threads, includes replacement thermal material)
595585-001
Intel Core i5 430M Dual Core processor, 2.26-GHz (Turbo up to 2.53) for use only with CQ36
computer models (3-MB L3 cache, 4 threads, includes replacement thermal material)
595586-001
Intel Core i3 350M Dual Core processor, 2.26-GHz for use only with CQ36 computer models (3-MB
L3 cache, 4 threads, includes replacement thermal material)
595587-001
Intel Core i3 330M Dual Core processor, 2.13-GHz for use only with CQ36 computer models (3-MB
L3 cache, 4 threads, includes replacement thermal material)
598856-001
2-GB memory module (PC3-10600, 1333-MHz, DDR3) for use only with CQ36 computer models
598859-001
1-GB memory module (PC3-10600, 1333-MHz, DDR3) for use only with CQ36 computer models
598858-001
2-GB memory module (PC2-6400, 800-MHz, DDR2) for use only with CQ35 computer models
598861-001
1-GB memory module (PC2-6400, 800-MHz, DDR2) for use only with CQ35 computer models
601955-001
13.4-inch BrightView LED display assembly for use only with CQ36 computer models without a
webcam (includes two WLAN antenna transceivers and cables, microphone, nameplate, and logo)
601956-001
Display bezel for use only with CQ36 computer models with 13.4-inch displays without a webcam
603721-001
13.4-inch BrightView LED display assembly for use only with CQ36 computer models with a webcam
(includes two WLAN antenna transceivers and cables, microphone, nameplate, and logo)
603722-001
Display bezel for use only with CQ36 computer models with 13.4-inch displays with a webcam
4
Removal and replacement procedures
Preliminary replacement requirements
Tools required
You will need the following tools to complete the removal and replacement procedures:
■
Flat-bladed screwdriver
■
Phillips P0 screwdriver
■
Phillips P1 screwdriver
Service considerations
The following sections include some of the considerations that you must keep in mind during disassembly and
assembly procedures.
you remove each subassembly from the computer, place the subassembly (and all accompanying screws)
✎ As
away from the work area to prevent damage.
Plastic parts
Ä
CAUTION: Using excessive force during disassembly and reassembly can damage plastic parts. Use care when handling the
plastic parts. Apply pressure only at the points designated in the maintenance instructions.
Cables and connectors
Ä
CAUTION: When servicing the computer, be sure that cables are placed in their proper locations during the reassembly
process. Improper cable placement can damage the computer.
Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat or seat the
cables during removal and insertion. Handle cables by the connector whenever possible. In all cases, avoid
bending, twisting, or tearing cables. Be sure that cables are routed in such a way that they cannot be caught or
snagged by parts being removed or replaced. Handle flex cables with extreme care; these cables tear easily.
4–1
Removal and replacement procedures
Drive handling
Drives are fragile components that must be handled with care. To prevent damage to the computer,
Ä CAUTION:
damage to a drive, or loss of information, observe these precautions:
■
■
■
■
■
■
■
■
■
Before removing or inserting a hard drive, shut down the computer. If you are unsure whether the computer is off
or in Hibernation, turn the computer on, and then shut it down through the operating system.
Before handling a drive, be sure that you are discharged of static electricity. While handling a drive, avoid
touching the connector.
Before removing a diskette drive or optical drive, be sure that a diskette or disc is not in the drive and be sure
that the optical drive tray is closed.
Handle drives on surfaces covered with at least one inch of shock-proof foam.
Avoid dropping drives from any height onto any surface.
After removing a hard drive, an optical drive, or a diskette drive, place it in a static-proof bag.
Avoid exposing a hard drive to products that have magnetic fields, such as monitors or speakers.
Avoid exposing a drive to temperature extremes or liquids.
If a drive must be mailed, place the drive in a bubble pack mailer or other suitable form of protective packaging
and label the package “FRAGILE.”
Grounding guidelines
Electrostatic discharge damage
Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure determine the
degree of sensitivity. Networks built into many integrated circuits provide some protection, but in many cases, ESD
contains enough power to alter device parameters or melt silicon junctions.
A discharge of static electricity from a finger or other conductor can destroy static-sensitive devices or
microcircuitry. Even if the spark is neither felt nor heard, damage may have occurred.
An electronic device exposed to ESD may not be affected at all and may work perfectly throughout a normal cycle.
Or the device may function normally for a while, and then degrade in the internal layers, reducing its life
expectancy.
To prevent damage to the computer when you are removing or installing internal components, observe
Ä CAUTION:
these precautions:
■
■
■
■
■
4–2
Keep components in their electrostatic-safe containers until you are ready to install them.
Use nonmagnetic tools.
Before touching an electronic component, discharge static electricity by using the guidelines described in
this section.
Avoid touching pins, leads, and circuitry. Handle electronic components as little as possible.
If you remove a component, place it in an electrostatic-safe container.
Removal and replacement procedures
The following table shows how humidity affects the electrostatic voltage levels generated by different activities.
Ä CAUTION: A product can be degraded by as little as 700 V.
Typical electrostatic voltage levels
Relative humidity
Event
10%
40%
55%
Walking across carpet
35,000 V
15,000 V
7,500 V
Walking across vinyl floor
12,000 V
5,000 V
3,000 V
Motions of bench worker
6,000 V
800 V
400 V
Removing DIPS from plastic tube
2,000 V
700 V
400 V
Removing DIPS from vinyl tray
11,500 V
4,000 V
2,000 V
Removing DIPS from Styrofoam
14,500 V
5,000 V
3,500 V
Removing bubble pack from PCB
26,500 V
20,000 V
7,000 V
Packing PCBs in foam-lined box
21,000 V
11,000 V
5,000 V
Packaging and transporting guidelines
Follow these grounding guidelines when packaging and transporting equipment:
■
To avoid hand contact, transport products in static-safe tubes, bags, or boxes.
■
Protect ESD-sensitive parts and assemblies with conductive or approved containers or packaging.
■
Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.
■
Place items on a grounded surface before removing items from their containers.
■
Always be properly grounded when touching a component or assembly.
■
Store reusable ESD-sensitive parts from assemblies in protective packaging or nonconductive foam.
■
Use transporters and conveyors made of antistatic belts and roller bushings. Be sure that mechanized equipment
used for moving materials is wired to ground and that proper materials are selected to avoid static charging.
When grounding is not possible, use an ionizer to dissipate electric charges.
4–3
Removal and replacement procedures
Workstation guidelines
Follow these grounding workstation guidelines:
■
Cover the workstation with approved static-shielding material.
■
Use a wrist strap connected to a properly grounded work surface, and use properly grounded tools and
equipment.
■
Use conductive field service tools, such as cutters, screwdrivers, and vacuums.
■
When fixtures must directly contact dissipative surfaces, use fixtures made only of static-safe materials.
■
Keep the work area free of nonconductive materials, such as ordinary plastic assembly aids and Styrofoam.
■
Handle ESD-sensitive components, parts, and assemblies by the case or PCM laminate. Handle these items
only at static-free workstations.
■
Avoid contact with pins, leads, or circuitry.
■
Turn off power and input signals before inserting or removing connectors or test equipment.
Equipment guidelines
Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation.
■
When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps with a
minimum of one megohm ±10% resistance in the ground cords. To provide proper ground, wear a strap snugly
against the skin at all times. On grounded mats with banana-plug connectors, use alligator clips to connect a
wrist strap.
■
When standing, use foot straps and a grounded floor mat. Foot straps (heel, toe, or boot straps) can be used at
standing workstations and are compatible with most types of shoes or boots. On conductive floors or
dissipative floor mats, use foot straps on both feet with a minimum of one megohm resistance between the
operator and ground. To be effective, the conductive strips must be worn in contact with the skin.
The following grounding equipment is recommended to prevent electrostatic damage:
■
Antistatic tape
■
Antistatic smocks, aprons, and sleeve protectors
■
Conductive bins and other assembly or soldering aids
■
Nonconductive foam
■
Conductive tabletop workstations with ground cords of one megohm resistance
■
Static-dissipative tables or floor mats with hard ties to the ground
■
Field service kits
■
Static awareness labels
■
Material-handling packages
■
Nonconductive plastic bags, tubes, or boxes
■
Metal tote boxes
■
Electrostatic voltage levels and protective materials
The following table lists the shielding protection provided by antistatic bags and floor mats.
4–4
Material
Use
Voltage protection level
Antistatic plastic
Bags
1,500 V
Carbon-loaded plastic
Floor mats
7,500 V
Metallized laminate
Floor mats
5,000 V
Removal and replacement procedures
Component replacement procedures
This chapter provides removal and replacement procedures.
There are as many as 65 screws, in 12 different sizes, that must be removed, replaced, or loosened when servicing
the computer. Make special note of each screw size and location during removal and replacement.
Service tag
When ordering parts or requesting information, provide the computer serial number and model number provided on
the service tag.
Item
Component
Description
1
Product name
This is the product name affixed to the front of the computer.
2
Serial number (s/n)
This is an alphanumeric identifier that is unique to each product.
3
Part number/Product number (p/n)
This number provides specific information about the product’s
hardware components. The part number helps a service
technician to determine what components and parts are needed.
4
Model description
This is the alphanumeric identifier used to locate documents,
drivers, and support for the computer.
5
Warranty period
This number describes the duration of the warranty period for
the computer.
4–5
Removal and replacement procedures
Computer feet
The computer feet are adhesive-backed rubber pads. The feet are included in the Rubber Kit, spare part number
537202-001. There are six rubber feet that attach to the base enclosure in the locations illustrated below.
4–6
Removal and replacement procedures
Battery
Description
Spare part number
9-cell, 2.55-Ah (83-Wh) Li-ion battery
530803-001
6-cell, 2.55-Ah (55-Wh) Li-ion battery
530802-001
6-cell, 2.20-Ah (47-Wh) Li-ion battery
530801-001
Before removing the battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
Remove the battery:
1. Turn the computer upside down on a flat surface, with the battery bay toward you.
2. Slide the battery release latch 1 to release the battery.
3. Lift the front edge of the battery 2 until it rests at an angle.
4. Remove the battery 3 from the computer.
Install the battery by inserting it into the battery bay until you hear a click.
4–7
Removal and replacement procedures
Hard drive
✎ The hard drive spare part kit includes a hard drive connector and hard drive bracket.
Description
Spare part number
500-GB, 7200-rpm hard drive for use only with CQ35 computer models
573738-001
500-GB, 7200-rpm hard drive for use only with CQ36 computer models
591423-001
500-GB, 5400-rpm hard drive for use only with CQ35 computer models
530797-001
320-GB, 7200-rpm hard drive for use only with CQ35 computer models
572085-001
320-GB, 7200-rpm hard drive for use only with CQ36 computer models
591422-001
320-GB, 5400-rpm hard drive for use only with CQ35 computer models
530796-001
320-GB, 5400-rpm Mini-Pocket Media Drive hard drive
519218-001
250-GB, 7200-rpm hard drive for use only with CQ35 computer models
572084-001
250-GB, 7200-rpm hard drive for use only with CQ36 computer models
591421-001
250-GB, 5400-rpm hard drive for use only with CQ35 computer models
530795-001
250-GB, 7200-rpm for use only with CQ35 computer models
588057-001
160-GB, 5400-rpm Mini-Pocket Media Drive hard drive
519217-001
160-GB solid-state drive
581404-001
Hard Drive Hardware Kit (includes hard drive connector, hard drive bracket, and screws)
534990-001
Solid-state Drive Mounting Kit
Rubber hard drive bumpers (not illustrated)
581405-001
539887-001
Before removing the hard drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 7).
Remove the hard drive:
1. Position the computer with the front toward you.
2. Loosen the three Phillips PM2.5×6.0 captive screws 1 that secure the hard drive cover to the computer.
3. Lift the left side 2 of the hard drive cover to detach it from the computer.
4–8
Removal and replacement procedures
4. Remove the hard drive cover 3. The hard drive cover is included in the Plastics Kit, spare part number
535521-001.
5. Remove the two hard drive spacers 1 that secure the hard drive in the hard drive bay.
6. Grasp the Mylar tab 2 on the hard drive and slide the hard drive 3 to the right.
7. Remove the hard drive 4 from the hard drive bay.
4–9
Removal and replacement procedures
8. If it is necessary to replace the hard drive bracket, follow these steps:
a. Remove the two Phillips PM3.0×4.0 screws 1 from each side of the hard drive.
b. Lift the bracket 2 straight up to remove it from the hard drive.
Reverse this procedure to reassemble and install the hard drive.
4–10
Removal and replacement procedures
Memory module
Description
Spare part number
For use only with CQ35 computer models:
2-GB memory module (PC2-6400, 800-MHz, DDR2)
598858-001
1-GB memory module (PC2-6400, 800-MHz, DDR2)
598861-001
For use only with CQ36 computer models:
2-GB memory module (PC3-10600, 1333-MHz, DDR3)
598856-001
1-GB memory module (PC3-10600, 1333-MHz, DDR3)
598859-001
Before removing the memory module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 7).
5. Remove the hard drive cover (see “Hard drive” on page 8).
Remove the memory module:
✎ The top memory module slot is for expansion memory and the bottom slot is for primary memory.
1. Spread the retaining tabs 1 on each side of the memory module to release the memory module. (The edge of
the module opposite the slot rises away from the computer.)
2. Remove the memory module 2 by pulling the module away from the slot at an angle.
Memory modules are designed with a notch 3 to prevent incorrect insertion into the memory
✎ module
slot.
Reverse this procedure to install a memory module.
4–11
Removal and replacement procedures
WLAN module
Description
Spare part number
WLAN modules for use only with CQ35 computer models:
Broadcom 4322AGN 802.11a/b/g/n WLAN module for use in Afghanistan, Albania, Algeria, Andorra,
Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the
Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan,
Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria,
Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, the Central African Republic, Chad,
Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark,
Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador,
Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia,
Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea,
Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland,
Israel, Italy, the Ivory Coast, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait,
Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg,
Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands,
Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco,
Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand,
Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay,
the People's Republic of China, Peru, the Philippines, Poland, Portugal, Qatar,
the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe,
Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the
Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St.
Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan,
Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan,
Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan,
Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
504664-002
Broadcom 4322 AGN 802.11a/b/g WLAN module for use in Afghanistan, Albania, Algeria, Andorra,
Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the
Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan,
Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria,
Burkina Faso, Burundi, Cameroon, Cape Verde, the Central African Republic, Chad, Chile,
Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark,
Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equatorial
Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia,
Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau,
Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Israel, Italy, the Ivory Coast,
Jamaica, Jordan, Kazakhstan, Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia,
Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives,
Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco,
Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the
Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama,
Papua New Guinea, Paraguay, the People's Republic of China, Peru, the Philippines, Poland,
Portugal, the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and
Principe, Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia,
Slovenia, the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and
Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland,
Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan,
Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan,
Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
518434-002
Continued
4–12
Removal and replacement procedures
Description
Spare part number
Atheros 9285G 802.11b/g WiFi Adapter for use in Afghanistan, Albania, Algeria, Andorra, Angola,
Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas,
Bahrain, Barbados, Belgium, Belize, Benin, Bermuda, Bhutan, Bosnia and Herzegovina, Botswana,
Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon,
Cape Verde, the Central African Republic, Chad, Chile, Colombia, Comoros, the Congo, Costa
Rica, Croatia, Cyprus, the Czech Republic, Djibouti, Dominica, the Dominican Republic, East Timor,
Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France,
French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada,
Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary,
Iceland, India, Indonesia, Ireland, Israel, Italy, the Ivory Coast, Jamaica, Japan, Jordan,
Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia,
Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the Maldives,
Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco,
Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the
Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Palau, Panama, Papua New
Guinea, Paraguay, the People’s Republic of China, Peru, the Philippines, Poland, Portugal, the
Republic of Moldova, Romania, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi
Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the Solomon
Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St.
Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan, Tajikistan,
Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, the
United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam,
Yemen, Zaire, Zambia, and Zimbabwe
518436-002
Intel WiFi Link 5100 802.11a/b/g/n WLAN module for use in all countries and regions except
Pakistan, Russia, and the Ukraine
480985-001
Broadcom 4312G 802.11a/b/g WLAN module for use in Afghanistan, Albania, Algeria, Andorra,
Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the
Bahamas, Bahrain, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin, Bermuda, Bhutan,
Bolivia, Bosnia and Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria,
Burkina Faso, Burundi, Cambodia, Cameroon, Cape Verde, the Central African Republic, Chad,
Colombia, Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark,
Djibouti, Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador,
Equitorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia,
Georgia, Germany, Ghana, Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea,
Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland,
Israel, Italy, the Ivory Coast, Jamaica, Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait,
Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg,
Macedonia, Madagascar, Malawi, Malaysia, the Maldives, Mali, Malta, the Marshall Islands,
Martinique, Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco,
Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the Netherlands, New Zealand,
Nicaragua, Niger, Nigeria, Norway, Oman, Pakistan, Palau, Panama, Papua New Guinea, Paraguay,
the People's Republic of China, Peru, the Philippines, Poland, Portugal, Qatar,
the Republic of Moldova, Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe,
Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, the
Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St.
Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan,
Tajikistan, Tanzania, Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan,
Tuvalu, Uganda, Ukraine, the United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan,
Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
504593-002
Continued
4–13
Removal and replacement procedures
Description
Spare part number
Broadcom 4311AG 802.11a/b/g WLAN module for use in Afghanistan, Albania, Algeria, Andorra,
Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the
Bahamas, Bahrain, Bangladesh, Barbados, Belgium, Belize, Benin, Bermuda, Bolivia, Bosnia and
Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi,
Cameroon, Cape Verde, the Cayman Islands, the Central African Republic, Chad, Chile, Colombia,
Comoros, the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti,
Dominica, the Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea,
Eritrea, Estonia, Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany,
Ghana, Gibraltar, Greece, Guadeloupe, Guam, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti,
Honduras, Hong Kong, Hungary, Iceland, India, Ireland, Italy, the Ivory Coast, Jamaica, Jordan,
Kenya, Kiribati, Kyrgyzstan, Laos, Latvia, Lesotho, Liberia, Liechtenstein, Lithuania, Luxembourg,
Macedonia, Madagascar, Malawi, the Maldives, Mali, Malta, the Marshall Islands, Martinique,
Mauritania, Mauritius, Mexico, Micronesia, Monaco, Mongolia, Montenegro, Morocco, Mozambique,
Namibia, Nauru, Nepal, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman,
Pakistan, Palau, Panama, Papua New Guinea, Paraguay, the People's Republic of China, Peru, the
Philippines, Poland, Portugal, Puerto Rico, the Republic of Moldova, Romania, Russia, Rwanda,
Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra
Leone, Singapore, Slovakia, Slovenia, the Solomon Islands, Somalia, South Africa, Spain, Sri
Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland,
Sweden, Switzerland, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia,
Turkey, Turkmenistan, Tuvalu, Uganda, the United Arab Emirates, the United Kingdom, Uruguay,
Uzbekistan, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
504593-004
Intel WiFi Link 5100 802.11a/b/g WLAN module for use in Pakistan, Russia, and the Ukraine
482957-001
Intel Wi-Fi Link 1000, 802.11b/g/n WLAN module for use in Andorra, Antigua and Barbuda,
Argentina, Aruba, Australia, Austria, Azerbaijan, the Bahamas, Barbados, Belgium, Bolivia, Bosnia
and Herzegovina, Brazil, Brunei, Bulgaria, Canada, Cayman Islands, Chile, China, Colombia, Costa
Rica, Croatia, Cyprus, the Czech Republic, Denmark, the Dominican Republic, Ecuador, Egypt, El
Salvador, Estonia, Finland, France, French Guiana, Guadeloupe, Guam, Georgia, Germany, Ghana,
Greece, Guatemala, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel,
Italy, Ivory Coast, Jamaica, Japan, Jordan, Kenya, Kuwait, Kyrgyzstan, Latvia, Lebanon,
Liechtenstein, Lithuania, Luxembourg, Malawi, Malaysia, Malta, Martinique, Mauritius, Mexico,
Monaco, Montenegro, Morocco, the Nether Antilles, the Netherlands, New Zealand, Nicaragua,
Nigeria, Oman, Pakistan, Panama, Paraguay, Peru, the Philippines, Poland, Portugal, Puerto Rico,
Qatar, Romania, San Marino, Saudi Arabia, Senegal, Singapore, Slovakia, Slovenia, South Africa,
South Korea, Spain, Sri Lanka, Sweden, Switzerland, Taiwan, Tanzania, Thailand, Trinidad and
Tobago, Turkey, United Arab Emirates, the United Kingdom, the United States, Uruguay, the U.S.
Virgin Islands, Venezuela, and Vietnam
572520-001
Continued
4–14
Removal and replacement procedures
Description
Spare part number
WLAN module for use with CQ35 and CQ36 computer models:
Atheros 9280AGN 802.11a/b/g/n WiFi Adapter for use in Canada, the Cayman Islands, Guam,
Puerto Rico, the United States, and the U.S. Virgin Islands for use in Afghanistan, Albania, Algeria,
Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan,
the Bahamas, Bahrain, Barbados, Belgium, Belize, Benin, Bermuda, Bhutan, Bosnia and
Herzegovina, Botswana, Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi,
Cambodia, Cameroon, Cape Verde, the Central African Republic, Chad, Chile, Colombia, Comoros,
the Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Djibouti, Dominica, the Dominican
Republic, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia, Ethiopia,
Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar,
Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras,
Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Israel, Italy, the Ivory Coast, Jamaica,
Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho,
Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia, the
Maldives, Mali, Malta, the Marshall Islands, Martinique, Mauritania, Mauritius, Mexico, Micronesia,
Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether
Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Palau, Panama,
Papua New Guinea, Paraguay, the People’s Republic of China, Peru, the Philippines, Poland,
Portugal, the Republic of Moldova, Romania, Rwanda, Samoa, San Marino, Sao Tome and
Principe, Saudi Arabia, Senegal, Serbia, the Seychelles, Sierra Leone, Singapore, Slovakia,
Slovenia, the Solomon Islands, Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and
Nevis, St. Lucia, St. Vincent and the Grenadines, Suriname, Swaziland, Sweden, Switzerland,
Syria, Taiwan, Tajikistan, Tanzania, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey,
Turkmenistan, Tuvalu, Uganda, the United Arab Emirates, the United Kingdom, Uruguay,
Uzbekistan, Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
518437-002
WLAN module for use with CQ36 computer models:
Atheros 9285G 802.11b/g/n WiFi Adapter for use in Canada, Cayman Islands, Guam, Puerto Rico,
the United States, and the U.S. Virgin Islands
580101-001
Atheros 9285G 802.11b/g/n WiFi Adapter for use in Afghanistan, Albania, Algeria, Andorra, Angola,
Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, the Bahamas,
Bahrain, Barbados, Belgium, Belize, Benin, Bermuda, Bhutan, Bosnia and Herzegovina, Botswana,
Brazil, the British Virgin Islands, Brunei, Bulgaria, Burkina Faso, Burundi, Cambodia, Cameroon,
Cape Verde, Central African Republic, Chad, Chile, the People’s Republic of China, Colombia,
Comoros, Congo, Costa Rica, Croatia, Cyprus, the Czech Republic, Denmark, Djibouti, Dominica,
Dominican Republic, East Timor, Ecuador, Egypt, El Salvador, Equatorial Guinea, Eritrea, Estonia,
Ethiopia, Fiji, Finland, France, French Guiana, Gabon, Gambia, Georgia, Germany, Ghana,
Gibraltar, Greece, Grenada, Guadeloupe, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti,
Honduras, Hong Kong, Hungary, Iceland, India, Indonesia, Ireland, Italy, Ivory Coast, Jamaica,
Japan, Jordan, Kazakhstan, Kenya, Kiribati, Kuwait, Kyrgyzstan, Laos, Latvia, Lebanon, Lesotho,
Liberia, Liechtenstein, Lithuania, Luxembourg, Macedonia, Madagascar, Malawi, Malaysia,
Martinique, Maldives, Mali, Malta, Marshall Islands, Mauritania, Mauritius, Mexico, Micronesia,
Monaco, Mongolia, Montenegro, Morocco, Mozambique, Namibia, Naura, Nepal, the Nether
Antilles, the Netherlands, New Zealand, Nicaragua, Niger, Nigeria, Norway, Oman, Palau, Panama,
Papua New Guinea, Paraguay, Peru, the Philippines, Poland, Portugal, the Republic of Moldova,
Romania, Russia, Rwanda, Samoa, San Marino, Sao Tome and Principe, Saudi Arabia, Senegal,
Serbia and Montenegro, Seychelles, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands,
Somalia, South Africa, South Korea, Spain, Sri Lanka, St. Kitts and Nevis, St. Lucia, St. Vincent &
Grenadine, Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan, Tajikistan, Tanzania,
Thailand, Togo, Tonga, Trinidad and Tobago, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, the
United Arab Emirates, the United Kingdom, Uruguay, Uzbekistan, Vanuatu, Venezuela, Vietnam,
Yemen, Zaire, Zambia, and Zimbabwe
580101-002
Atheros 9280AGN 802.11a/b/g/draft-n WiFi Adapter for use in Canada, the Cayman Islands, Guam,
Puerto Rico, the United States, and the U.S. Virgin Islands
580102-001
Continued
4–15
Removal and replacement procedures
Description
Spare part number
Intel Wi-Fi Link 1000 WLAN module for use in Andorra, Antigua & Barbuda, Aruba, Australia,
Argentina. Austria, Azerbaijan, Bahamas, Bahrain, Barbados, Belgium, Bermuda, Bolivia, Bosnia &
Herzegovina, Brazil, Brunei, Bulgaria, Canada, Cayman Islands, Chile, the People’s Republic of
China, Columbia, Costa Rica, Croatia, Czech Republic, Denmark, Dominican Republic, Ecuador,
Egypt, El Salvador, Estonia, Finland, France, French Guiana, Georgia, Germany, Ghana, Greece,
Guam, Guadeloupe, Guatemala, Haiti, Honduras, Hong Kong, Hungary, Iceland, India, Indonesia,
Ireland, Israel, Italy, Ivory Coast, Jamaica, Japan, Jordan, Kenya, South Korea, Kuwait, Kyrgyzstan,
Latvia, Lebanon, Liechtenstein, Lithuania, Luxembourg, Malawi, Malaysia, Malta, Martinique,
Mauritius, Mexico, Monaco, Montenegro, Morocco, the Netherlands, Nether Antilles, New Zealand,
Nicaragua, Nigeria, Norway, Oman, Pakistan, Panama, Paraguay, Peru, the Philippines, Poland,
Portugal, Puerto Rico, Qatar, Romania, San Marino, Saudi Arabia, Senegal, Singapore, Slovakia,
Slovenia, South Africa, Spain, Sri Lanka, Sweden, Switzerland, Taiwan, Tanzania, Thailand, Trinidad
and Tobago, Turkey, Ukraine, United Arab Emirates, the United Kingdom, the United States, U.S.
Virgin Islands, Uruguay, Venezuela, and Vietnam
593030-001
Intel Wi-Fi Link 1000 for use for use in Russia and the Ukraine
593031-001
Broadcom 43225 802.11b/g/n 2x2 WiFi Adapter for use in Antigua & Barbuda, Angola, Argentina,
Aruba, Australia, Armenia, Afghanistan, Bolivia, Albania, Andorra, Algeria, Austria, Belgium,
Belarus, Belize, Bhutan, Benin, Bahamas, Azerbaijan, Bahrain, Barbados, Bangladesh, Bermuda,
British Virgin Islands, Burundi, Burkina Faso, Botswana, Bosnia & Herzegovina, Brazil, Bulgaria,
Brunei, Cambodia, Cameroon, Canada, Cape Verde, the Cayman Islands, Central African Republic,
Chad, Chile, the People’s Republic of China, Colombia, Comoros, Congo, Costa Rica, Croatia,
Cyprus, the Czech Republic, Djibouti, Denmark, Dominica, the Dominican Republic, East Timor,
Ecuador, El Salvador, Egypt, Equatorial Guinea, Eritrea, Estonia, Ethiopia, Fiji, Finland, France,
French Guiana, Gabon, Gambia, Georgia, Germany, Ghana, Gibraltar, Greece, Grenada,
Guadeloupe, Guam, Guatemala, Guinea, Guinea-Bissau, Guyana, Haiti, Honduras, Hong Kong,
Hungary, Iceland, India, Indonesia, Ivory Coast, Iraq, Ireland, Italy, Israel, Jamaica, Japan, Jordan,
Kazakhstan, Kenya, Kiribati, Laos, Latvia, Lebanon, Lesotho, Liberia, Liechtenstein, Lithuania,
Luxembourg, Macedonia, Madagascar, Mali, Malta, Marshall Islands, Malawi, Malaysia, Maldives,
Republic of Moldova, Martinique, Mauritius, Monaco, Kuwait, Kyrgyzstan, Mauritania, Mexico,
Micronesia, Mongolia, Morocco, Mozambique, Namibia, Nauru, Nepal, the Nether Antilles, the
Netherlands, New Zealand, Nicaragua, Nigeria, Oman, Niger, Norway, Qatar, Pakistan, Palau,
Panama, Papua New Guinea, Paraguay, Peru, Philippines, Portugal, Poland, Puerto Rico, Romania,
Russia, Rwanda, Samoa, San Marino, Saudi Arabia, Sao Tome & Principe, Senegal, Seychelles,
Serbia and Montenegro, Sierra Leone, Singapore, Slovakia, Slovenia, Solomon Islands, Somalia,
South Africa, South Korea, Spain, Sri Lanka, St. Vincent the Grenadines, St. Lucia, St. Kitts & Nevis,
Suriname, Swaziland, Sweden, Switzerland, Syria, Taiwan, Tajikistan, Tanzania, Thailand, Tonga,
Trinidad and Tobago, Togo, Tunisia, Turkey, Turkmenistan, Tuvalu, Uganda, Ukraine, Uruguay, the
United Kingdom, the United Arab Emirates, the United States, the U.S. Virgin Islands, Uzbekistan,
Vanuatu, Venezuela, Vietnam, Yemen, Zaire, Zambia, and Zimbabwe
593837-001
Before removing the WLAN module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 7).
4–16
Removal and replacement procedures
Remove the WLAN module:
Ä
CAUTION: To prevent an unresponsive system, replace the wireless module only with a wireless module authorized for use in the
computer by the governmental agency that regulates wireless devices in your country or region. If you replace the module and
then receive a warning message, remove the module to restore computer functionality, and then contact technical support through
Help and Support.
1. Loosen the Phillips PM2.5×6.0 captive screw 1 that secures the wireless module compartment cover to
the computer.
2. Lift the rear edge 2 of the wireless module compartment cover to detach it from the computer.
3. Remove the wireless module compartment cover 3. The wireless module compartment cover is included in the
Plastics Kit, spare part number 535521-001.
4. Remove the Phillips PM2.0×3.0 screw 1 that secures the WLAN module bracket to the computer.
5. Remove the WLAN module bracket 2. (The edge of the module opposite the slot rises away from
the computer.)
6. Disconnect the WLAN antenna cables 3 from the terminals on the WLAN module.
black WLAN antenna cable is connected to the WLAN module “Main” terminal. The white WLAN antenna
✎ The
cable is connected to the WLAN module “Aux” terminal.
4–17
Removal and replacement procedures
7. Remove the WLAN module 4 by pulling the module away from the slot at an angle.
modules are designed with a notch 5 to prevent incorrect insertion of the WLAN module into the WLAN
✎ WLAN
module slot.
Reverse this procedure to install the WLAN module.
4–18
Removal and replacement procedures
RTC battery
Description
Spare part number
RTC battery (includes cable and double-sided tape)
531829-001
Before removing the RTC battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 7).
5. Remove the wireless module compartment cover (see “WLAN module” on page 12).
Remove the RTC battery:
1. Disconnect the RTC battery cable 1 from the system board.
2. Detach the RTC battery 2 from the base enclosure and release the RTC battery as far as the RTC battery cable
allows. (The RTC battery is attached to the base enclosure with double-sided tape.)
3. Remove the RTC battery.
Reverse this procedure to install the RTC battery.
4–19
Removal and replacement procedures
Optical drive
✎ The optical drive spare part kit includes an optical drive bezel and bracket.
Description
Spare part number
For use only with CQ35 computer models:
Blu-ray ROM DVD±R/RW SuperMulti DL Drive with LightScribe
534988-001
Blu-ray ROM DVD±R/RW SuperMulti DL Drive
534987-001
DVD±RW and CD-RW SuperMulti Double-Layer Drive with LightScribe
534986-001
For use only with CQ36 computer models:
Blu-ray ROM DVD±R/RW SuperMulti DL Drive with LightScribe
591530-001
DVD±RW and CD-RW SuperMulti Double-Layer Drive with LightScribe
591529-001
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 7).
Remove the optical drive:
1. Position the computer with the right side toward you.
2. Remove the Phillips PM2.0×9.0 screw 1 that secures the optical drive to the computer.
3. Insert a thin tool, such as a paper clip, into the release access 2. (The optical drive disc tray is partially ejected
from the optical drive.)
4. Use the disc tray frame to slide the optical drive 3 out of the computer.
4–20
Removal and replacement procedures
5. If it is necessary to replace the optical drive bracket, follow these steps:
a. Position the optical drive with the rear toward you.
b. Remove the two Phillips PM2.0×3.0 screws 1 that secure the optical drive bracket to the optical drive.
c. Remove the optical drive bracket 2.
Reverse this procedure to reassemble and install the optical drive.
4–21
Removal and replacement procedures
Keyboard
For use in country or region:
Spare part number
For use in country or region:
Spare part number
Keyboard for use with CQ35 computer models (includes keyboard cable):
■ For use in South Korea
531774-AD1
■ For use in Thailand
531774-281
■ For use in Taiwan
531774-AB1
■ For use in the United States
531774-001
Keyboard for use with CQ36 computer models (includes keyboard cable):
■ For use in South Korea
530643-AD1
■ For use in Thailand
530643-281
■ For use in Taiwan
530643-AB1
■ For use in the United States
530643-001
Before removing the keyboard, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 7).
5. Remove the hard drive cover (see “Hard drive” on page 8).
Remove the keyboard:
1. Remove the three Phillips PM2.0×9.0 screws that secure the keyboard to the computer.
4–22
Removal and replacement procedures
2. Turn the computer display-side up with the front toward you.
3. Open the computer as far as possible.
4. Lift the rear edge 1 of the keyboard until it rests at an angle.
5. Slide the keyboard 2 toward the display until the tabs on the front edge of the keyboard are clear of the
openings in the top cover.
6. Swing the rear edge of the keyboard 3 up and forward until it rests upside down on the top cover.
7. Release the zero insertion force (ZIF) connector 1 to which the keyboard cable is attached, and then
disconnect the keyboard cable 2 from the system board.
8. Remove the keyboard.
Reverse this procedure to install the keyboard.
4–23
Removal and replacement procedures
Keyboard cover
Description
Spare part number
Keyboard cover for use only with CQ35 computer models (includes power button board and cable)
531819-001
Keyboard cover for use only with CQ36 computer models (includes power button board and cable)
591435-001
Before removing the keyboard cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 7).
5. Remove the hard drive cover (see “Hard drive” on page 8).
6. Remove the keyboard (see “Keyboard” on page 22).
Remove the keyboard cover:
1. Remove the two Phillips PM2.5×9.0 screws 1 and the eight Phillips PM2.0×2.0 broadhead screws 2 that
secure the keyboard cover to the computer.
4–24
Removal and replacement procedures
2. Turn the computer display-side up with the front toward you.
3. Open the computer as far as possible.
4. Disconnect the caps lock LED cable 1 and the LED board cable 2 from the low insertion force (LIF)
connectors on the system board.
5. Lift the rear edge of the keyboard cover 3 and swing it up and forward until it detaches from the computer.
6. Remove the keyboard cover.
Reverse this procedure to install the keyboard cover.
4–25
Removal and replacement procedures
Right speaker
Description
Spare part number
Speaker assembly (includes left and right speakers and speaker cables)
534435-001
Before removing the right speaker, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 7).
5. Remove the following components:
a. Hard drive cover (see “Hard drive” on page 8)
b. Keyboard (see “Keyboard” on page 22)
c. Keyboard cover (see “Keyboard cover” on page 24).
Remove the right speaker:
1. Disconnect the right speaker cable 1 from the system board.
2. Release the speaker cables from the clips 2 and routing channels built into the top cover.
3. Remove the Phillips PM2.0×4.0 screw 3 that secures the right speaker to the top cover.
4. Remove the right speaker 4.
Reverse this procedure to install the right speaker.
4–26
Removal and replacement procedures
Top cover
top cover spare part kit includes the TouchPad on/off board and cable, TouchPad button board and cable, and
✎ The
TouchPad board and cable.
Description
Spare part number
For use only with computer models equipped with fingerprint reader board (includes fingerprint
reader board cable)
531824-001
For use only with computer models not equipped with fingerprint reader board
531825-001
Before removing the top cover, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 7).
5. Remove the following components:
a. Hard drive (see “Hard drive” on page 8)
b. Optical drive (see “Optical drive” on page 20)
c. Keyboard (see “Keyboard” on page 22)
d. Keyboard cover (see “Keyboard cover” on page 24)
e. Right speaker (see “Right speaker” on page 26)
Remove the top cover:
1. Turn the computer upside down with the front toward you.
2. Remove the following screws that secure the top cover to the base enclosure:
1 Four Phillips PM2.0×9.0 screws on the front edge of the base enclosure
2 One Phillips PM2.0×2.5 broadhead screw in the hard drive bay
3 One Phillips PM2.0×4.0 screw in the hard drive bay
4–27
Removal and replacement procedures
3. Disconnect the left speaker cable 1 from the system board.
4. Remove the left speaker cable 2 from the clips and routing channel through which it is routed.
5. Disconnect the microphone cable 3 from the system board.
6. Disconnect the display panel cable 4 from the system board.
7. Remove the display panel cable from the clips 5 and routing channel through which it is routed.
8. Disconnect the TouchPad cable 1 from the LIF connector on the system board.
9. Disconnect the TouchPad on/off button board cable 2 from the LIF connector on the system board.
10. Disconnect the fingerprint reader board cable 3 from the system board.
4–28
Removal and replacement procedures
11. Remove the five Phillips PM2.0×4.0 screws that secure the top cover to the base enclosure.
12. Lift the rear edge 1 of the top cover until it rests at an angle.
13. Remove the top cover 2 by lifting it straight up.
Reverse this procedure to install the top cover.
4–29
Removal and replacement procedures
Fingerprint reader board
Description
Spare part number
Fingerprint reader board (includes cable)
531828-001
Before removing the fingerprint reader board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 7).
5. Remove the following components:
a. Hard drive (see “Hard drive” on page 8)
b. Optical drive (see “Optical drive” on page 20)
c. Keyboard (see “Keyboard” on page 22)
d. Keyboard cover (see “Keyboard cover” on page 24)
e. Right speaker (see “Right speaker” on page 26)
f. Top cover (see “Top cover” on page 27).
Remove the fingerprint reader board:
1. Turn the top cover upside down with the front edge toward you.
2. Remove the Phillips PM2.0×3.0 screw 1 that secures the fingerprint reader board and bracket to the top cover.
3. Remove the fingerprint reader board bracket 2.
4. Detach the fingerprint reader board cable 3 from the top cover. The fingerprint reader board cable is attached
to the top cover with double-sided tape.
5. Remove the fingerprint reader board 4.
Reverse this procedure to install the fingerprint reader board.
4–30
Removal and replacement procedures
Left speaker
Description
Spare part number
Speaker assembly (includes left and right speakers and speaker cables)
531816-001
Before removing the left speaker, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 7).
5. Remove the following components:
a. Hard drive (see “Hard drive” on page 8)
b. Optical drive (see “Optical drive” on page 20)
c. Keyboard (see “Keyboard” on page 22)
d. Keyboard cover (see “Keyboard cover” on page 24)
e. Right speaker (see “Right speaker” on page 26)
f. Top cover (see “Top cover” on page 27).
Remove the left speaker:
1. Remove the two Phillips PM2.0×3.0 screws 1 that secure the left speaker to the top cover.
2. Release the left speaker 2 by lifting the left side until the speaker clears the base enclosure.
3. Remove the left speaker.
Reverse this procedure to install the left speaker.
4–31
Removal and replacement procedures
Display assembly
display assembly spare part kit includes two WLAN antenna transceivers and cables, webcam, microphone,
✎ The
nameplate, and logo.
Description
Spare part number
For use only with CQ35 computer models:
13.3-in BrightView display assembly with webcam
531798-001
13.3-in BrightView display assembly without webcam
531799-001
13.4-in BrightView display assembly
586634-001
For use only with CQ36 computer models:
13.3-in BrightView display assembly with webcam
593023-001
13.3-in BrightView display assembly without webcam
593024-001
13.4-in BrightView display assembly with webcam
603721-001
13.4-in BrightView display assembly without webcam
601955-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 7).
5. Disconnect the wireless antenna cables from the WLAN module (see “WLAN module” on page 12).
6. Remove the following components:
a. Hard drive (see “Hard drive” on page 8)
b. Optical drive (see “Optical drive” on page 20)
c. Keyboard (see “Keyboard” on page 22)
d. Keyboard cover (see “Keyboard cover” on page 24)
e. Right speaker (see “Right speaker” on page 26)
f. Top cover (see “Top cover” on page 27).
g. Left speaker (see “Left speaker” on page 31)
4–32
Removal and replacement procedures
Remove the display assembly:
1. Remove the WLAN antenna cables 1 from the opening 2 in the base enclosure.
Ä
CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can
result in damage to the display assembly and other computer components.
2. Remove the two Phillips PM2.5×6.0 screws 1 that secure the display assembly to the computer.
3. Lift the display assembly 2 straight up and remove it.
4–33
Removal and replacement procedures
4. If it is necessary to replace the display bezel or any of the display assembly internal components, remove the
two Mylar screw covers 1 and the two Phillips PM2.5×6.0 screws 2 on the display bezel lower edge.
5. Flex the inside edges of the top edge 1, the left and right sides 2, and the bottom edge 3 of the display bezel
until the bezel disengages from the display enclosure.
6. Remove the display bezel 4. The display bezel is available using the following spare part numbers:
❏ 531800-001—for use only with CQ35 computer models equipped with a webcam
❏ 531801-001—for use only with CQ35 computer models not equipped with a webcam
❏ 590307-001—for use only with CQ35 computer models equipped with a 13.4-inch display and a webcam
❏ 591527-001—for use only with CQ36 computer models equipped with a 13.3-inch display and a webcam
❏ 591528-001—for use only with CQ36 computer models equipped with a 13.3-inch display without a
webcam
❏ 603722-001—for use only with CQ36 computer models equipped with a 13.4-inch display and a webcam
❏ 601956-001—for use only with CQ36 computer models equipped with a 13.4-inch display without a
webcam
4–34
Removal and replacement procedures
7. If it is necessary to replace the webcam module, lift the webcam module 1 as far from the display enclosure as
the webcam module allows.
8. Disconnect the webcam module cable 2 from the webcam module.
9. Remove the webcam module. The webcam module is available using spare part number 531805-001.
10. If it is necessary to replace the display panel, remove the six Phillips PM2.5×4.0 screws 1 that secure the
display panel to the display enclosure.
11. Remove the display panel 2. The display panel is available using spare part number 530782-001 for 13.3-inch
displays and 530783-001 for 13.4-inch displays.
4–35
Removal and replacement procedures
12. If it is necessary to replace the display hinges, remove the six Phillips PM2.0×3.0 screws 1 that secure the
hinges to the display panel.
13. Remove the display hinges 2. The display hinges are available using spare part number 531803-001 for
13.3-inch displays and 590308-001 for 13.4-inch displays.
14. If it is necessary to replace the display panel cable, turn the display panel upside down with the bottom edge
toward you.
15. Disconnect the display panel cable 1 from the connector on the back of the display panel.
16. Remove the display panel cable 2. The display panel cable is available using spare part number 531802-001
and includes the webcam module cable.
4–36
Removal and replacement procedures
17. If it is necessary to replace the wireless antenna transceivers and cables, release the tabs 1 built into the display
enclosure shielding.
18. Release the wireless antenna transceivers 2 from the display enclosure. The transceivers are attached to the
enclosure with double-sided tape.
19. Remove the wireless antenna transceivers and cables 3. The wireless antenna transceivers and cables are
available using spare part number 531804-001.
20. If it is necessary to replace the microphone receiver and cable, remove the microphone receiver 1 from the clip
built into the display enclosure.
21. Remove the microphone cable from the clips 2 and routing channel built into the right side of the
display enclosure.
22. Remove the microphone receiver and cable 3. The microphone receiver and cable are available using spare
part number 534438-001.
Reverse this procedure to reassemble and install the display assembly.
4–37
Removal and replacement procedures
LED board
Description
Spare part number
LED board (includes cable)
531826-001
Before removing the LED board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 7).
5. Remove the following components:
a. Hard drive (see “Hard drive” on page 8)
b. Optical drive (see “Optical drive” on page 20)
c. Keyboard (see “Keyboard” on page 22)
d. Keyboard cover (see “Keyboard cover” on page 24)
e. Right speaker (see “Right speaker” on page 26)
f. Top cover (see “Top cover” on page 27).
Remove the LED board and cable:
1. Disconnect the LED board cable 1 from the system board.
2. Remove the LED board cable from the clips 2 and routing channel built into the base enclosure.
3. Remove the Phillips PM2.0×4.0 screw 3 that secures the LED board to the base enclosure.
4. Remove the LED board and cable 4.
Reverse this procedure to install the LED board.
4–38
Removal and replacement procedures
Bluetooth module
Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth module cable is
✎ The
available using spare part number 534436-001 for CQ35 computer models and 591417-001 for CQ36 computer
models.
Description
Spare part number
Bluetooth module for use only with CQ35 computer models
483113-001
Bluetooth module for use only with CQ36 computer models
537921-001
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 7).
5. Remove the following components:
a. Hard drive (see “Hard drive” on page 8)
b. Optical drive (see “Optical drive” on page 20)
c. Keyboard (see “Keyboard” on page 22)
d. Keyboard cover (see “Keyboard cover” on page 24)
e. Right speaker (see “Right speaker” on page 26)
f. Top cover (see “Top cover” on page 27).
Remove the Bluetooth module and cable:
1. Disconnect the Bluetooth module cable 1 from the system board.
2. Remove the Bluetooth module cable from the clips 2 and routing channel built into the base enclosure.
3. Remove the Bluetooth module and cable 3.
Reverse this procedure to install the Bluetooth module.
4–39
Removal and replacement procedures
Audio board
Description
Spare part number
Audio board for use with CQ35 computer models (includes cable)
531812-001
Audio board for use with CQ36 computer models (includes cable)
593025-001
Before removing the audio board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 7).
5. Remove the following components:
a. Hard drive (see “Hard drive” on page 8)
b. Optical drive (see “Optical drive” on page 20)
c. Keyboard (see “Keyboard” on page 22)
d. Keyboard cover (see “Keyboard cover” on page 24)
e. Right speaker (see “Right speaker” on page 26)
f. Top cover (see “Top cover” on page 27).
Remove the audio board and cable:
1. Disconnect the audio board cable 1 from the system board.
2. Remove the Phillips PM2.0×4.0 screw 2 that secures the audio board to the system board.
3. Lift the rear edge of the audio board 3 so that the audio connectors slide out of the openings in the base
enclosure, and then remove the audio board and cable.
Reverse this procedure to install the audio board.
4–40
Removal and replacement procedures
USB board
Description
Spare part number
USB board (includes cable)
531809-001
Before removing the USB board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 7).
5. Remove the following components:
a. Hard drive (see “Hard drive” on page 8)
b. Optical drive (see “Optical drive” on page 20)
c. Keyboard (see “Keyboard” on page 22)
d. Keyboard cover (see “Keyboard cover” on page 24)
e. Right speaker (see “Right speaker” on page 26)
f. Top cover (see “Top cover” on page 27).
Remove the USB board and cable:
1. Remove the Phillips PM2.0×4.0 screw 1 that secures the USB board to the system board.
2. Remove the USB board and cable 2.
Reverse this procedure to install the USB board.
4–41
Removal and replacement procedures
Power connector and cable
Description
Spare part number
Power connector and cable
531810-001
Before removing the power connector and cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 7).
5. Remove the following components:
a. Hard drive (see “Hard drive” on page 8)
b. Optical drive (see “Optical drive” on page 20)
c. Keyboard (see “Keyboard” on page 22)
d. Keyboard cover (see “Keyboard cover” on page 24)
e. Display assembly (see “Display assembly” on page 32).
f. Top cover (see “Top cover” on page 27).
Remove the power connector and cable:
1. Remove the power connector 1 from the clip 2 built into the base enclosure.
2. Remove the power connector and cable.
Reverse this procedure to install the power connector and cable.
4–42
Removal and replacement procedures
System board
✎ The system board spare part kit includes replacement thermal material.
Description
Spare part number
For use only with CQ35 computer models:
For use only with CQ35-101-299 computer models with discrete memory graphics
subsystems
538765-002
For use only with CQ35-101-299 computer models with UMA memory graphics
subsystems
538766-001
For use only with CQ35-301-499 computer models with discrete memory graphics
subsystems
576797-001
For use only with CQ35-301-499 computer models with UMA memory graphics
subsystems
576798-001
For use only with CQ36 computer models:
For use only with computer models with UMA memory graphics subsystems
591415-001
For use only with computer models with discrete memory graphics subsystems
591416-001
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 7).
5. Remove the following components:
a. Hard drive (see “Hard drive” on page 8)
b. Memory module (see “Memory module” on page 11)
c. WLAN module (see “WLAN module” on page 12)
d. Optical drive (see “Optical drive” on page 20)
e. Keyboard (see “Keyboard” on page 22)
f. Keyboard cover (see “Keyboard cover” on page 24)
g. Right speaker (see “Right speaker” on page 26)
h. Top cover (see “Top cover” on page 27).
i. Left speaker (see “Left speaker” on page 31)
j. Display assembly (see “Display assembly” on page 32).
When replacing the system board, be sure that the following additional components are removed from the defective
system board and installed on the replacement system board:
■
RTC battery (see “RTC battery” on page 19)
■
Heat sink (see “Fan/heat sink assembly” on page 46)
■
Processor (see “Processor” on page 51)
4–43
Removal and replacement procedures
Remove the system board:
1. Disconnect the following cables from the system board:
1 LED board cable
2 Bluetooth module cable
3 Audio board cable
2. Remove the two Phillips PM2.5×4.0 screws that secure the system board to the base enclosure.
4–44
Removal and replacement procedures
3. Use the optical drive connector 1 to lift the left side of the system board 2 until it rests at an angle.
4. Remove the system board from the base enclosure by pulling it away at an angle 3.
Reverse this procedure to install the system board.
4–45
Removal and replacement procedures
Fan/heat sink assembly
✎ The fan/heat sink assembly spare part kit includes replacement thermal material.
Description
Spare part number
For use only with CQ35 computer models equipped with graphics subsystems with:
Discrete memory
531814-001
UMA memory
531813-001
For use only with CQ36 computer models equipped with graphics subsystems with:
Discrete memory
591431-001
UMA memory
591430-001
properly ventilate the computer, allow at least a 7.6-cm (3-in) clearance on the left side of the computer. The
✎ Tocomputer
uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is designed to
turn on automatically when high temperature conditions exist. These conditions are affected by high external
temperatures, system power consumption, power management/battery conservation configurations, battery fast
charging, and software requirements. Exhaust air is displaced through the ventilation grill located on the left side
of the computer.
Before removing the fan/heat sink assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see “Battery” on page 7).
5. Remove the following components:
a. Hard drive (see “Hard drive” on page 8)
b. Memory module (see “Memory module” on page 11)
c. WLAN module (see “WLAN module” on page 12)
d. Optical drive (see “Optical drive” on page 20)
e. Keyboard (see “Keyboard” on page 22)
f. Keyboard cover (see “Keyboard cover” on page 24)
g. Right speaker (see “Right speaker” on page 26)
h. Top cover (see “Top cover” on page 27).
i. Left speaker (see “Left speaker” on page 31)
j. Display assembly (see “Display assembly” on page 32).
k. System board (see “System board” on page 43).
4–46
Removal and replacement procedures
Remove the fan/heat sink assembly:
1. Turn the system board upside down with the front toward you.
2 and 3 apply to computer models equipped with graphics subsystems with discrete memory. See steps 4
✎ Steps
and 5 for instructions on removing the fan/heat sink assembly on computer models equipped with graphics
subsystems with UMA memory.
2. Loosen the four captive Phillips PM2.0×7.0 screws 1 that secure the fan/heat sink assembly to the
system board.
3. Remove the fan/heat sink assembly 2.
to the adhesive quality of the thermal material located between the fan/heat sink assembly and system board
✎ Due
components, it may be necessary to move the fan/heat sink assembly from side to side to detach the assembly.
4–47
Removal and replacement procedures
thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly and the system
✎ The
board each time the fan/heat sink assembly is removed:
■
Thermal paste is used on the processor 1 and the heat sink section 2 that services it.
Thermal pads are used on the Northbridge chip 3 and the heat sink section 4 that services it.
■ Thermal pads are used on the graphics subsystem memory module 5 and the heat sink section 6 that
services it.
■ Thermal pads are used on the other system board components 7 and heat sink sections 8 that service them.
■
Replacement thermal material is included with all system board, fan/heat sink assembly, and processor spare
part kits.
4–48
Removal and replacement procedures
4 and 5 apply to computer models equipped with graphics subsystems with UMA memory. See steps 2
✎ Steps
and 3 for instructions on removing the fan/heat sink assembly on computer models equipped with graphics
subsystems with discrete memory.
4. Loosen the four captive Phillips PM2.0×7.0 screws 1 that secure the fan/heat sink assembly to the
system board.
5. Remove the fan/heat sink assembly 2.
to the adhesive quality of the thermal material located between the fan/heat sink assembly and system board
✎ Due
components, it may be necessary to move the fan/heat sink assembly from side to side to detach the assembly.
4–49
Removal and replacement procedures
thermal material must be thoroughly cleaned from the surfaces of the fan/heat sink assembly and the system
✎ The
board each time the fan/heat sink assembly is removed:
■
Thermal paste is used on the processor 1 and the heat sink section 2 that services it.
Thermal pads are used on the Northbridge chip 3 and the heat sink section 4 that services it.
■ Thermal pads are used on the other system board components 5 and sections of the heat sink 6 that
service them.
■
Replacement thermal material is included with all system board, fan/heat sink assembly, and processor spare
part kits.
Reverse this procedure to install the fan/heat sink assembly.
4–50
Removal and replacement procedures
Processor
✎ The processor spare part kit includes replacement thermal material.
Description
Spare part number
Intel Core2 processors for use only with CQ35 computer models:
■ T9900 2.93-GHz processor (6-MB L2 cache, 1066-MHz FSB)
570434-001
■ T9800 2.93-GHz processor (6-MB L2 cache, 1066-MHz FSB)
507951-001
■ T9600 2.80-GHz processor (6-MB L2 cache, 1066-MHz FSB)
507952-001
■ T9550 2.66-GHz processor (6-MB L2 cache, 1066-MHz FSB)
507953-001
■ P8800 2.66-GHz processor (3-MB L2 cache, 1066-MHz FSB)
570036-001
■ P8700 2.53-GHz processor (3-MB L2 cache, 1066-MHz FSB)
507960-001
■ P8600 2.40-GHz processor (3-MB L2 cache, 1066-MHz FSB)
507963-001
■ P7550 2.26-GHz processor (3-MB L2 cache, 1066-MHz FSB)
573076-001
■ T6600 2.20-GHz processor (3-MB L2 cache, 1066-MHz FSB)
513593-001
■ P7450 2.13-GHz processor (3-MB L2 cache, 1066-MHz FSB)
507965-001
■ T6500 2.10-GHz processor (3-MB L2 cache, 1066-MHz FSB)
572928-001
■ T6400 2.06-GHz processor (6-MB L2 cache, 1066-MHz FSB)
513592-001
■ P7350 2.00-GHz processor (3-MB L2 cache, 1066-MHz FSB)
507967-001
Intel Pentium processors for use only with CQ35 computer models:
■ T4400 2.20-GHz processor (1-MB L2 cache, 800-MHz FSB)
584296-001
■ T4300 2.10-GHz processor (1-MB L2 cache, 800-MHz FSB)
572929-001
■ T4200 2.00-GHz processor (1-MB L2 cache, 800-MHz FSB)
513599-001
■ T3100 1.90-GHz processor (1-MB L2 cache, 800-MHz FSB)
572925-001
■ T3000 1.80-GHz processor (1-MB L2 cache, 800-MHz FSB)
572926-001
Intel Celeron processor for use only with CQ35 computer models:
■ T1600 1.66-GHz processor (1-MB L2 cache, 667-MHz FSB)
532324-001
Intel Core i5 processors, Dual Core for use only with CQ36 computer models
■ 540M Dual Core processor, 2.53-GHz (Turbo up to 3.06) (3-MB L3 cache, 4 threads)
594646-001
■ 520M Dual Core processor, 2.40-GHz (Turbo up to 3.06) (3-MB L3 cache, 4 threads)
594645-001
■ 430M Dual Core processor, 2.26-GHz (Turbo up to 2.53) (3-MB L3 cache, 4 threads)
595585-001
Intel Core i3 processors, Dual Core for use only with CQ36 computer models
■ 350M Dual Core processor, 2.26-GHz (3-MB L3 cache, 4 threads)
595586-001
■ 330M Dual Core processor, 2.13-GHz (3-MB L3 cache, 4 threads)
595587-001
Before removing the processor, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4–51
Removal and replacement procedures
4. Remove the battery (see “Battery” on page 7).
5. Remove the following components:
a. Hard drive (see “Hard drive” on page 8)
b. Memory module (see “Memory module” on page 11)
c. WLAN module (see “WLAN module” on page 12)
d. RTC battery (see “RTC battery” on page 19)
e. Optical drive (see “Optical drive” on page 20)
f. Keyboard (see “Keyboard” on page 22)
g. Keyboard cover (see “Keyboard cover” on page 24)
h. Right speaker (see “Right speaker” on page 26)
i. Display assembly (see “Display assembly” on page 32).
j. Top cover (see “Top cover” on page 27).
k. System board (see “System board” on page 43).
l. Fan/heat sink assembly (see “Fan/heat sink assembly” on page 46).
Remove the processor:
1. Use a flat-bladed screwdriver to turn the processor locking screw 1 one-half turn counterclockwise until you
hear a click.
2. Lift the processor 2 straight up and remove it.
you install the processor, the gold triangle 3 on the processor must be aligned with the triangle 4 embossed
✎ When
on the processor socket.
Reverse this procedure to install the processor.
4–52
5
Setup Utility
Starting the Setup Utility
The Setup Utility is a ROM-based information and customization utility that can be used even when your Windows
operating system is not working.
✎ The fingerprint reader (select models only) cannot be used to access the Setup Utility.
The utility reports information about the computer and provides settings for startup, security, and other preferences.
To start the Setup Utility:
» Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup
Menu” message is displayed in the lower-left corner of the screen, press f10.
– or –
1. Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup
Menu” message is displayed in the lower-left corner of the screen, press esc.
2. When the Startup Menu is displayed, press f10.
Using the Setup Utility
Changing the language of the Setup Utility
The following procedure explains how to change the language of the Setup Utility. If the Setup Utility is not
already running, begin at step 1. If the Setup Utility is already running, begin at step 2.
1. Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup
Menu” message is displayed in the lower-left corner of the screen, press f10.
– or –
Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup
Menu” message is displayed in the lower-left corner of the screen, press esc. When the Startup Menu is
displayed, press f10.
2. Use the arrow keys to select System Configuration > Language, and then press enter.
3. Use the arrow keys to select a language, and then press enter.
4. When a confirmation prompt with your language selected is displayed, press enter.
5. To save your change and exit the Setup Utility, use the arrow keys to select Exit > Exit Saving Changes, and
then press enter.
Your change goes into effect immediately.
5–1
Setup Utility
Navigating and selecting in the Setup Utility
Because the Setup Utility is not Windows based, it does not support the TouchPad. Navigation and selection are
by keystroke.
■ To choose a menu or a menu item, use the arrow keys.
■ To choose an item in a list or to toggle a field, for example an Enable/Disable field, use either the arrow keys or
f5 or f6.
■ To select an item, press enter.
■ To close a text box or return to the menu display, press esc.
■ To display additional navigation and selection information while the Setup Utility is open, press f1.
Displaying system information
The following procedure explains how to display system information in the Setup Utility. If the Setup Utility is not
open, begin at step 1. If the Setup Utility is open, begin at step 2.
1. Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup
Menu” message is displayed in the lower-left corner of the screen, press f10.
– or –
Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup
Menu” message is displayed in the lower-left corner of the screen, press esc. When the Startup Menu is
displayed, press f10.
2. Select the Main menu. System information, such as the system time and date, and identification information
about the computer is displayed.
3. To exit the Setup Utility without changing any settings, use the arrow keys to select Exit > Exit Discarding
Changes, and then press enter.
Restoring default settings in the Setup Utility
The following procedure explains how to restore the Setup Utility default settings. If the Setup Utility is not already
running, begin at step 1. If the Setup Utility is already running, begin at step 2.
1. Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup
Menu” message is displayed in the lower-left corner of the screen, press f10.
– or –
Open the Setup Utility by turning on or restarting the computer. While the “Press the ESC key for Startup
Menu” message is displayed in the lower-left corner of the screen, press esc. When the Startup Menu is
displayed, press f10.
2. Use the arrow keys to select Exit > Load Setup Defaults, and then press enter.
3. When the Setup Confirmation is displayed, press enter.
4. To save your change and exit the Setup Utility, use the arrow keys to select Exit > Exit Saving Changes, and
then press enter.
The Setup Utility default settings go into effect when the computer restarts.
✎ Your password, security, and language settings are not changed when you restore the factory default settings.
5–2
Setup Utility
Exiting the Setup Utility
You can exit the Setup Utility with or without saving changes.
■ To exit the Setup Utility and save your changes from the current session:
If the Setup Utility menus are not visible, press esc to return to the menu display. Then, use the arrow keys to
select Exit > Exit Saving Changes, and then press enter.
■ To exit the Setup Utility without saving your changes from the current session:
If the Setup Utility menus are not visible, press esc to return to the menu display. Then, use the arrow keys to
select Exit > Exit Discarding Changes, and then press enter.
After either choice, the computer restarts in Windows.
Setup Utility menus
The menu tables in this section provide an overview of Setup Utility options.
✎ Some of the Setup Utility menu items listed in this chapter may not be supported by your computer.
Main menu
Select
To Do This
System information
■ View and change the system time and date.
■ View identification information about the computer.
■ View specification information about the processor, memory size,
system BIOS, and keyboard controller version (select models only).
Security menu
Select
To Do This
Administrator password
Enter, change, or delete an administrator password.
Power-On Password
Enter, change, or delete a power-on password.
5–3
Setup Utility
System Configuration menu
Select
To Do This
Language Support
Change the Setup Utility language.
Button Sound (select models only)
Enable/disable the capacitative button tapping sound.
Virtualization Technology
Enable/disable the processor Virtualization Technology.
Processor C6 State (select models only)
Enable/disable the processor C6 sleep state.
LAN Power Saving (select models only)
Enable/disable LAN Power Saving. When enabled, saves power when the
computer is in DC mode.
Card Reader/1394 Power Saving (select
models only)
Enable/disable Card Reader/1394 Power Saving.
Fan Always On
Enabled/disable Fan Always On. When enabled, the computer fan will always
be on.
Boot Options
Set the following boot options:
■ f10 and f12 Delay (seconds)—Set the delay for the f10 and f12 functions of
the Setup Utility in intervals of 5 seconds each (0, 5, 10, 15, 20).
■ CD-ROM boot—Enable/disable boot from CD-ROM.
■ Floppy boot—Enable/disable boot from diskette.
■ Internal Network Adapter boot—Enable/disable boot from Internal
Network Adapter.
■ Boot Order—Set the boot order for:
❐ Hard drive
❐ Internal CD/DVD ROM drive
❐ USB Diskette on Key/USB hard disk
❐ USB CD/DVD ROM drive
❐ USB floppy
❐ Network adapter
Diagnostics menu
Select
To Do This
Hard Disk Self Test
Run a comprehensive self-test on the hard drive.
models with two hard drives, this menu option is called the
✎ On
Primary Hard Disk Self Test.
5–4
Secondary Hard Disk Self Test
(select models only)
Run a comprehensive self test on a secondary hard drive.
Memory Test
Run a diagnostic test on the system memory.
6
Specifications
Computer specifications
Metric
U.S.
Length
21.9 cm
8.62 in
Width
32.8 cm
12.9 in
Height (front to rear)
3.2 to 3.6 cm
1.25 to 1.41 in
Weight
2.2 kg
4.93 lbs
Dimensions
Input power
Operating voltage
19.0 V dc @ 4.74 A - 65 W
Operating current
4.74 A
Temperature
Operating (not writing to optical disc)
0°C to 35°C
32°F to 95°F
Operating (writing to optical disc)
5°C to 35°C
41°F to 95°F
Nonoperating
-20°C to 60°C
-4°F to 140°F
Relative humidity
Operating
10% to 90%
Nonoperating
5% to 95%
Maximum altitude (unpressurized)
Operating
-15 m to 3,048 m
-50 ft to 10,000 ft
Nonoperating
-15 m to 12,192 m
-50 ft to 40,000 ft
product safety standards specify thermal limits for plastic surfaces. The computer operates well within this
✎ Applicable
range of temperatures.
6–1
Specifications
13.3-in display specifications
Metric
U.S.
Height
17.8 cm
7.0 in
Width
28.4 cm
11.2 in
Diagonal
33.6 cm
13.3 in
Number of colors
Up to 16.8 million
Contrast ratio
250:1 (typical)
Brightness
200 nits (typical)
Dimensions
Pixel resolution
6–2
Pitch
0.279 × 0.279 mm
Format
1366 × 768
Configuration
RGB vertical stripe
Backlight
Edge lit
Character display
80 × 25
Total power consumption
4.0 W
Viewing angle
±40° horizontal, +120°/-40° vertical (typical)
Specifications
Hard drive specifications
500-GB*
320-GB*
250-GB*
160-GB*
Height
9.5 mm
9.5 mm
9.5 mm
9.5 mm
Width
70 mm
70 mm
70 mm
70 mm
Weight
101 g
101 g
101 g
101 g
Interface type
SATA
SATA
SATA
SATA
Transfer rate
100 MB/sec
100 MB/sec
100 MB/sec
100 MB/sec
Security
ATA security
ATA security
ATA security
ATA security
Single track
1.0 ms
1.5 ms
2.0 ms
2.0 ms
Average
14.0 ms
12.0 ms
12.0 ms
12.0 ms
Maximum
22.0 ms
22.0 ms
22.0 ms
22.0 ms
Logical blocks
976,773,168
625,142,448
488,397,168
312,581,808
Disc rotational speed
7200 and
5400 rpm
7200 and
5400 rpm
7200 and
5400 rpm
5400 rpm
Dimensions
Seek times (typical read, including setting)
Operating temperature
5°C to 55°C (41°F to 131°F)
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive
specifications may differ slightly.
✎ Certain restrictions and exclusions apply. Contact technical support for details.
6–3
Specifications
Blu-ray ROM DVD±R/RW SuperMulti DL Drive specifications
Applicable disc
Read:
Write:
BD-ROM, BD-ROM-DL, BD-R,
BD-R-DL, BD-RE, BD-RE-DL,
DVD-ROM, DVD+R,
DVD+R-DL, DVD+RW, DVD-R,
DVD-R-DL, DVD-RW,
DVD-RAM (Ver.2), CD-DA,
CD-ROM (mode 1 and
mode 2), CD-ROM XA
(mode 2, form 1 and form 2),
Photo CD (single and multiple
sessions), CD Extra, CD-R,
CD-RW, and CD-TEXT
BD-RAM, DVD-RAM (Ver.2),
DVD+R, DVD-R, CD-R, and
CD-ROM
Access time
BD
DVD
Random
< 230 ms
< 180 ms
Cache buffer
4.5 MB
Data transfer rate
6–4
2X BD-RAM
9 MB/sec
8X DVD
2,400 KB/sec
16X CD-R
2,400 KB/sec
16X CD-RW
2,400 KB/sec
Specifications
DVD±RW and CD-RW SuperMulti Double-Layer Drive specifications
Applicable disc
Read:
Write:
CD-DA, CD+(E)G, CD-MIDI,
CD-TEXT, CDROM,
CD-ROM XA,
MIXED MODE CD, CD-I,
CD-I Bridge (Photo-CD,
Video CD), Multisession CD
(Photo-CD, CD-EXTRA,
Portfolio, CD-R, CD-RW),
CD-R, CD-RW, DVD-ROM
(DVD-5, DVD-9, DVD-10,
DVD-18), DVD-R, DVD-RW,
DVD+R, DVD+RW, DVD-RAM
CD-R and CD-RW DVD+R,
DVD+RW, DVD-R, DVD-RW,
DVD-RAM
Access time
CD
DVD
Random
< 175 ms
< 230 ms
Cache buffer
2.5 MB
Data transfer rate
24X CD-ROM
3,600 KB/sec
8X DVD
10,800 KB/sec
24X CD-R
3,600 KB/sec
16X CD-RW
2,400 KB/sec
8x DVD+R
10,800 KB/sec
4X DVD+RW
5,400 KB/sec
8X DVD-R
10,800 KB/sec
4X DVD-RW
5,400 KB/sec
2.4X DVD+R(9)
2,700 KB/sec
5X DVD-RAM
6,750 KB/sec
Transfer mode
Multiword DMA mode
6–5
Specifications
System DMA specifications
Hardware
DMA System function
DMA0
Not applicable
DMA1*
Not applicable
DMA2*
Not applicable
DMA3
Not applicable
DMA4
Direct memory access controller
DMA5*
Not applicable
DMA6
Not assigned
DMA7
Not assigned
*ExpressCard controller can use DMA 1, 2, or 5.
6–6
Specifications
System memory map specifications
Size
Memory address
System function
640 KB
00000000-0009FFFF
Base memory
128 KB
000A0000-000BFFFF
Video memory
64 KB
000C0000-000CFFFF
Video BIOS
64 KB
000E8000-000FFFFF
System BIOS
00100000- XFFFFFFF
Extended memory (based on
memory installed)
(X+1)0000000-FEDFFFFF
PCI bus
FED00000-FED003FF
High precision event timer
FEE01000-FFFFFFFF
PCI bus
6–7
Specifications
System interrupt specifications
Hardware IRQ
System function
IRQ0
System timer
IRQ1
Standard 101-/102-key or Microsoft natural keyboard
IRQ8
System CMOS/real-time clock
IRQ12
Synaptics PS/2 TouchPad
IRQ13
Numeric data processor
IRQ16
Intel ICH9 family USB universal host controller 2937
Mobile Intel 4 Series express chipset family
IRQ17
High definition audio controller
Intel ICH9 family USB universal host controller 2938
Marvell Yukon 88E8072 PCIE-gigabit Ethernet controller
IRQ18
Intel ICH9 family USB universal host controller 2939
Intel ICH9 family USB universal host controller 2936
IRQ19
Intel ICH9 family USB2 enhanced controller 293C
IRQ20
Intel ICH9 family USB2 enhanced controller 293A
Intel ICH9 family USB universal host controller 2934
IRQ21
Intel ICH9M-E/M SATA AHCI controller
IRQ22
Intel ICH9 family USB universal host controller 2935
*Default configuration; audio possible configurations are IRQ5, IRQ7, IRQ9, IRQ10, or none.
Cards may assert IRQ3, IRQ4, IRQ5, IRQ7, IRQ9, IRQ10, IRQ11, or IRQ15. Either the infrared or the serial port
✎ PC
may assert IRQ3 or IRQ4.
✎ For operating systems after Windows 2000, APIC (Advanced programming interrupt controller) is used.
6–8
Specifications
System I/O address specifications
I/O address (hex)
System function (shipping configuration)
000 - 01F
DMA controller
020 - 021
Program interrupt controller
024 - 025
Program interrupt controller
028 - 029
Program interrupt controller
02C - 03D
Program interrupt controller
02E - 02F
Motherboard resources
030 - 031
Program interrupt controller
034 - 035
Program interrupt controller
038 - 039
Program interrupt controller
03C- 03D
Program interrupt controller
040 - 043
System timer
04E-04F
Motherboard resources
050-053
System timer
060
Standard 101-/102-key or Microsoft natural keyboard
061
Motherboard resources
062
Microsoft ACPI-compliant embedded controller
063
Motherboard resources
064
Standard 101-/102-key or Microsoft natural keyboard
065
Motherboard resources
066
Microsoft ACPI-compliant embedded controller
067
Motherboard resources
070
Motherboard resources
071-077
System CMOS/real time clock
080
Motherboard resources
081-091
Direct memory access controller
092
Motherboard resources
093-09F
Direct memory access controller
0A0-0A1
Program interrupt controller
0A4-0A5
Program interrupt controller
0A8-0A9
Program interrupt controller
0AC-0AD
Program interrupt controller
0B0-0B1
Program interrupt controller
0B2-0B3
Motherboard resources
0B4- 0B5
Program interrupt controller
0B8-0B9
Program interrupt controller
0BC- 0BD
Program interrupt controller
Continued
6–9
Specifications
6–10
I/O address (hex)
System function (shipping configuration)
0C0- 0DF
Direct memory access controller
0F0- 0F0
Numeric data processor
0200-027F
Motherboard resources
3B0-3BB
Mobile Intel 4 series express chipset family
3C0-3DF
Mobile Intel 4 series express chipset family
400-47F
Motherboard resources
4D0-4D1
Programmable interrupt controller
500-57F
Motherboard resources
1000-1003
Motherboard resources
1010-101F
Motherboard resources
2000-20FF
Marvell Yukon 88E8072 PCI-E Gigabit Ethernet controller
2000-2FFF
ICH9 family PCI express root port6-294A
3000-4FFF
ICH9 family PCI express root port5-2948
5000-6FFF
ICH9 family PCI express root port3-2944
7000-701F
ICH9M-E/M SATA AHCI controller
7020-703F
ICH9 family USB universal host controller-2936
7040-705F
ICH9 family USB universal host controller-2935
7060-707F
ICH9 family USB universal host controller-2934
7080-709F
ICH9 family USB universal host controller-2939
70A0-70BF
ICH9 family USB universal host controller-2938
70C0-70DF
ICH9 family USB universal host controller-2937
70E0-70E7
ICH9M-E/M SATA AHCI controller
70E8-70EF
ICH9M-E/M SATA AHCI Controller
70F0-70F7
Mobile Intel 4 series express chipset family
70F8-70FB
ICH9M-E/M SATA AHCI controller
70FC-70FF
ICH9M-E/M SATA AHCI controller
EF80-EF9F
Motherboard resources
FE00-FE0F
Motherboard resources
FE80-EF8F
Motherboard resources
FFFF
Motherboard resources
7
Screw listing
This section provides specification and reference information for the screws used in the computer. The screws
listed in this section are available in the Screw Kit, spare part number 531815-001.
Phillips PM2.5×6.0 captive screw
Color
Quantity
Length
Thread
Head diameter
Black
4
6.0 mm
2.5 mm
5.0 mm
Where used:
1 Three captive screws that secure the hard drive cover to the computer (screws are secured on the hard drive cover
by C-clips)
2 One captive screw that secures the wireless module compartment cover to the computer (screw is secured on the
wireless module compartment cover by a C-clip)
7–1
Screw listing
Phillips PM3.0×4.0 screw
Color
Quantity
Length
Thread
Head diameter
Silver
4
4.0 mm
3.0 mm
5.0 mm
Where used: 4 screws that secure the hard drive bracket to the hard drive
7–2
Screw listing
Phillips PM2.0×4.0 screw
Color
Quantity
Length
Thread
Head diameter
Silver
10
4.0 mm
2.0 mm
5.0 mm
Where used: One screw that secures the right speaker to the computer
Where used: One screw that secures the top cover to the computer in the hard drive bay
7–3
Screw listing
Where used: 5 screws that secure the top cover to the computer
Where used:
1 One screw that secures the LED board to the base enclosure
2 One screw that secures the audio board to the base enclosure
3 One screw that secures the USB board to the base enclosure
7–4
Screw listing
Phillips PM2.0×9.0 screw
Color
Quantity
Length
Thread
Head diameter
Black
8
9.0 mm
2.0 mm
5.0 mm
Where used:
1 One screw that secures the optical drive to the computer
2 Three screws that secure the keyboard to the computer
3 Four screws that secure the top cover to the computer
7–5
Screw listing
Phillips PM2.0×3.0 screw
Color
Quantity
Length
Thread
Head diameter
Silver
12
3.0 mm
2.0 mm
4.5 mm
Where used: One screw that secures the WLAN module bracket to the base enclosure
7–6
Screw listing
Where used: 2 screws that secure the optical drive bracket to the optical drive
Where used: One screw that secures the fingerprint reader board bracket to the top cover
7–7
Screw listing
Where used: 2 screws that secure the left speaker to the base enclosure
Where used: 6 screws that secure the display hinges to the display panel
7–8
Screw listing
Phillips PM2.5×9.0 screw
Color
Quantity
Length
Thread
Head diameter
Black
2
9.0 mm
2.5 mm
5.0 mm
Where used: 2 screws that secure the keyboard cover to the computer
7–9
Screw listing
Phillips PM2.0×2.5 broadhead screw
Color
Quantity
Length
Thread
Head diameter
Silver
9
2.5 mm
2.0 mm
6.0 mm
Where used:
1 Eight screws that secure the keyboard cover to the computer in the battery bay and optical drive bay
2 One screw that secures the top cover to the computer in the hard drive bay
7–10
Screw listing
Phillips PM2.5×6.0 screw
Color
Quantity
Length
Thread
Head diameter
Black
4
6.0 mm
2.5 mm
5.0 mm
Where used: 2 screws that secure the display assembly to the computer
Where used: 2 screws that secure the display bezel to the display assembly
7–11
Screw listing
Phillips PM2.5×4.0 screw
Color
Quantity
Length
Thread
Head diameter
Black
8
4.0 mm
2.5 mm
5.0 mm
Where used: 6 screws that secure the display panel to the display enclosure
7–12
Screw listing
Where used: 2 screws that secure the system board to the computer
7–13
Screw listing
Phillips PM2.0×7.0 captive screw
Color
Quantity
Length
Thread
Head diameter
Silver
4
7.0 mm
2.0 mm
5.0 mm
Where used: 4 captive screws that secure the fan/heat sink assembly to the system board (screws are secured on
the fan/heat sink assembly by C-clips)
7–14
8
Backup and recovery
Backup and recovery in Windows Vista
Overview
Recovery after a system failure is as complete as your most current backup. HP recommends that you create
recovery discs immediately after software setup. As you add new software and data files, you should continue to
back up your system on a regular basis to maintain a reasonably current backup.
Tools provided by the operating system and HP Recovery Manager software are designed to help you with the
following tasks for safeguarding your information and restoring it in case of a system failure:
■
Creating a set of recovery discs (Recovery Manager software feature). Recovery discs are used to start up
(boot) your computer and restore the operating system and software programs to factory settings in case of
system failure or instability.
■
Backing up your information regularly to protect your important system files.
■
Creating system restore points (operating system feature). System restore points allow you to reverse
undesirable changes to your computer by restoring the computer to an earlier state.
■
Recovering a program or driver (Recovery Manager software feature). This feature helps you reinstall a
program or driver without performing a full system recovery.
■
Performing a full system recovery (Recovery Manager software feature). With Recovery Manager, you can
recover your full factory image if you experience system failure or instability. Recovery Manager works from a
dedicated recovery partition (select models only) on the hard drive or from recovery discs you create.
with a solid-state drive (SSD) may not have a recovery partition. Recovery discs have been included
✎ Computers
for computers that do not have a partition. Use these discs to recover your operating system and software. To
check for the presence of a recovery partition, select Start > Computer. If the partition is present, an HP
Recovery drive is listed in the Hard Disk Drives section of the window.
Creating recovery discs
HP recommends that you create recovery discs to be sure that you can restore your system to its original factory
state if you experience serious system failure or instability. Create these discs after setting up the computer for the
first time.
Handle these discs carefully and keep them in a safe place. The software allows the creation of only one set of
recovery discs.
your computer does not include an internal optical drive, you can use an optional external optical drive
✎ If(purchased
separately) to create recovery discs, or you can purchase recovery discs for your computer from the
HP Web site.
8–1
Backup and recovery
Note the following guidelines before creating recovery discs:
■
You will need high-quality DVD-R, double-layer DVD-R, DVD+R, double-layer DVD+R, BD-R (writable
Blu-ray), or CD-R discs. All these discs are purchased separately. DVDs and BDs have a much higher capacity
than CDs. If you use CDs, up to 20 discs may be required, whereas only a few DVDs or BDs are required.
discs, such as CD-RW, DVD±RW, double-layer DVD±RW, and BD-RE (rewritable Blu-ray) discs,
✎ Read-write
are not compatible with the Recovery Manager software.
■
The computer must be connected to AC power during this process.
■
Only one set of recovery discs can be created per computer.
■
Number each disc before inserting it into the optical drive.
■
If necessary, you can exit the program before you have finished creating the recovery discs. The next time you
open Recovery Manager, you will be prompted to continue the disc creation process.
To create a set of recovery discs:
1. Select Start > All Programs > Recovery Manager > Recovery Manager.
Recovery Manager opens.
2. Click Advanced Options.
are operating the computer on battery power, you will be prompted to connect to AC power before you can
✎ Ifgoyou
to the next step.
3. Click Recovery disc creation, and then click Next.
4. Follow the on-screen instructions.
Backing up your information
When to back up
■
On a regularly scheduled basis
✎ Set reminders to back up your information periodically.
■
Before the computer is repaired or restored
■
Before you add or modify hardware or software
Backup suggestions
8–2
■
Create a set of recovery discs using Recovery Manager.
■
Create system restore points using the Windows System Restore feature, and periodically copy them to disc.
■
Store personal files in the Documents folder and back up this folder periodically.
■
Back up templates stored in their associated programs.
■
Save customized settings in a window, toolbar, or menu bar by taking a screen shot of your settings. The screen
shot can be a time-saver if you have to reset your preferences.
Backup and recovery
To copy the screen and paste it into a word-processing document, follow these steps:
a. Display the screen.
b. Copy the screen:
To copy only the active window, press alt+fn+prt sc.
To copy the entire screen, press fn+prt sc.
c. Open a word-processing document, and then select Edit > Paste.
Using system restore points
When you back up your system, you are creating a system restore point. A system restore point allows you to save
and name a snapshot of your hard drive at a specific point in time. You can then recover back to that point if you
want to reverse subsequent changes made to your system.
to an earlier restore point does not affect data files saved or e-mails created since the last
✎ Recovering
restore point.
You also can create additional restore points to provide increased protection for your system files and settings.
When to create restore points
■
Before you add or extensively modify software or hardware
■
Periodically, whenever the system is performing optimally
✎ If you revert to a restore point and then change your mind, you can reverse the restoration.
Create a system restore point
1. Select Start > Control Panel > System and Maintenance > System.
2. In the left pane, click System Protection.
3. Click the System Protection tab.
4. Under Automatic restore points, select the disk for which you want to create a restore point.
5. Click Create.
The System Protection window opens.
6. Follow the on-screen instructions.
Restore to a previous date and time
To revert to a restore point (created at a previous date and time), when the computer was functioning optimally,
follow these steps:
1. Select Start > Control Panel > System and Maintenance > System.
2. In the left pane, click System protection.
3. Click the System Protection tab.
4. Click the System Restore button, and then click Next.
The System Restore window opens.
5. Follow the on-screen instructions.
8–3
Backup and recovery
Performing a recovery
can recover only files that you have previously backed up. HP recommends that you use HP Recovery
✎ You
Manager to create an entire drive backup as soon as you set up your computer.
Recovery Manager software allows you to repair or restore the system if you experience system failure or
instability. Recovery Manager works from recovery discs or from a dedicated recovery partition (select models
only) on the hard drive. However, if your computer includes a solid-state drive (SSD), you may not have a recovery
partition. If that is the case, recovery discs have been included with your computer. Use these discs to recover your
operating system and software.
has its own built-in repair features, such as System Restore and driver roll-back capabilities. If you
✎ Windows
have not already tried these features, try them before using Recovery Manager.
Manager recovers only software that was preinstalled at the factory. Software not provided with this
✎ Recovery
computer must be downloaded from the manufacturer's Web site or reinstalled from the disc provided by the
manufacturer.
Recovering from the recovery discs
To restore the system from the recovery discs:
1. Back up all personal files.
2. Insert the first recovery disc into the optical drive and restart the computer.
3. Follow the on-screen instructions.
Recovering from the dedicated recovery (select models only)
computer includes an SSD, you may not have a recovery partition. You will not be able to recover using
✎ Ifthisyourprocedure.
Recovery discs have been included for computers that do not have a partition. Use these discs to
recover your operating system and software.
On some models, you can perform a recovery from the partition on the hard drive by pressing either the Start
button or f11. This restores the computer to its factory condition.
To restore the system from the partition, follow these steps:
1. Access Recovery Manager in either of the following ways:
◆
Select Start > All Programs > Recovery Manager > Recovery Manager.
– or –
◆
Restart the computer and press f11 while the “Press <F11> for recovery” message is displayed on the
screen. Then, select Recovery Manager.
Recovery Manager opens.
2. Click Advanced Options.
3. Click System recovery, and then click Next.
4. Follow the on-screen instructions.
8–4
Backup and recovery
Backup and recovery in Windows 7
Recovery after a system failure is as complete as your most current backup. HP recommends that you create
recovery discs immediately after software setup. As you add new software and data files, you should continue to
back up your system on a regular basis to maintain a reasonably current backup.
Tools provided by the operating system and HP Recovery Manager software are designed to help you with the
following tasks for safeguarding your information and restoring it in case of a system failure:
■
Creating a set of recovery discs (Recovery Manager software feature). Recovery discs are used to start up
(boot) your computer and restore the operating system and software programs to factory settings in case of
system failure or instability.
■
Backing up your information regularly to protect your important system files.
■
Creating system restore points (operating system feature). System restore points allow you to reverse
undesirable changes to your computer by restoring the computer to an earlier state.
■
Recovering a program or driver (Recovery Manager software feature). This feature helps you reinstall a
program or driver without performing a full system recovery.
■
Performing a full system recovery (Recovery Manager software feature). With Recovery Manager, you can
recover your full factory image if you experience system failure or instability. Recovery Manager works from a
dedicated recovery partition (select models only) on the hard drive or from recovery discs you create.
with a solid-state drive (SSD) may not have a recovery partition. Recovery discs have been included
✎ Computers
for computers that do not have a partition. Use these discs to recover your operating system and software. To
check for the presence of a recovery partition, select Start, right-click Computer, click Manage, and then click
Creating recovery discs
HP recommends that you create recovery discs to be sure that you can restore your system to its original factory
state if you experience serious system failure or instability. Create these discs after setting up the computer for the
first time.
Handle these discs carefully and keep them in a safe place. The software allows the creation of only one set of
recovery discs.
your computer does not include an internal optical drive, you can use an optional external optical drive
✎ If(purchased
separately) to create recovery discs, or you can purchase recovery discs for your computer from the
HP Web site.
Note the following guidelines before creating recovery discs:
■
You will need high-quality DVD-R, DVD+R, BD-R (writable Blu-ray), or CD-R discs. All these discs are
purchased separately. DVDs and BDs have a much higher capacity than CDs. If you use CDs, up to 20 discs
may be required, whereas only a few DVDs or BDs are required.
discs, such as CD-RW, DVD±RW, double-layer DVD±RW, and BD-RE (rewritable Blu-ray) discs, are
✎ Read-write
not compatible with the Recovery Manager software.
■
The computer must be connected to AC power during this process.
■
Only one set of recovery discs can be created per computer.
■
Number each disc before inserting it into the optical drive.
■
If necessary, you can exit the program before you have finished creating the recovery discs. The next time you
open Recovery Manager, you will be prompted to continue the disc creation process.
8–5
Backup and recovery
To create a set of recovery discs:
1. Click Start, click All Programs, click Recovery Manager, and then click Recovery Disc Creation.
2. Follow the on-screen instructions.
Backing up your information
As you add new software and data files, you should back up your system on a regular basis to maintain a
reasonably current backup. Back up your system at the following times:
■
At regularly scheduled times
✎ Set reminders to back up your information periodically.
■
Before the computer is repaired or restored
■
Before you add or modify hardware or software
Note the following when backing up:
■
Create system restore points using the Windows System Restore feature, and periodically copy them to disc.
■
Store personal files in the Documents library and back up this folder periodically.
■
Back up templates stored in their associated programs.
■
Save the customized settings in a window, toolbar, or menu bar by taking a screen shot of the settings. The
screen shot can be a time-saver if you have to reset your preferences.
To copy the screen and paste the image into a word-processing document:
a. Display the screen.
b. Copy the screen:
To copy only the active window, press alt+fn+prt sc.
To copy the entire screen, press fn+prt sc.
c. Open a word-processing document, click Edit, and then click Paste.
d. Save the document.
■
You can back up your information to an optional external hard drive, a network drive, or discs.
■
When backing up to discs, use any of the following types of discs (purchased separately): CD-R, CD-RW,
DVD+R, DVD-R, or DVD±RW. The discs you use will depend on the type of optical drive installed in your
computer.
store more information than CDs, so using them for backup reduces the number of recovery discs
✎ DVDs
required.
■
When backing up to discs, number each disc before inserting it into the optical drive of the computer.
Using Windows Backup and Restore
To create a backup using Windows Backup and Restore, follow these steps:
✎ Be sure that the computer is connected to AC power before you start the backup process.
✎ The backup process may take over an hour, depending on file size and the speed of the computer.
1. Click Start, click All Programs, click Maintenance, and then click Backup and Restore.
2. Follow the on-screen instructions to set up and create a backup.
8–6
Backup and recovery
includes the User Account Control feature to improve the security of the computer. You may be
✎ Windows®
prompted for your permission or password for tasks such as installing software, running utilities, or changing
Windows settings. Refer to Help and Support for more information.
Using system restore points
When you back up your system, you are creating a system restore point. A system restore point allows you to save
and name a snapshot of your hard drive at a specific point in time. You can then recover back to that point if you
want to reverse subsequent changes made to your system.
✎
Recovering to an earlier restore point does not affect data files saved or e-mails created since the last restore point.
You also can create additional restore points to provide increased protection for your system files and settings.
When to create restore points
■
Before you add or extensively modify software or hardware.
■
Periodically, whenever the system is performing optimally.
✎ If you revert to a restore point and then change your mind, you can reverse the restoration.
Create a system restore point
1. Click Start, click Control Panel, click System and Security, and then click System.
2. In the left pane, click System protection.
3. Click the System Protection tab.
4. Under Production Settings, select the disk for which you want to create a restore point.
5. Click Create.
6. Follow the on-screen instructions.
Restore to a previous date and time
To revert to a restore point (created at a previous date and time), when the computer was functioning optimally,
follow these steps:
1. Click Start, click Control Panel, click System and Security, and then click System.
2. In the left pane, click System protection.
3. Click the System Protection tab.
4. Click System Restore.
5. Follow the on-screen instructions.
Performing a recovery
can recover only files that you have previously backed up. HP recommends that you use Recovery Manager
✎ You
to create a set of recovery discs (an entire drive backup) as soon as you set up your computer.
Recovery Manager software allows you to repair or restore the system if you experience system failure or
instability. Recovery Manager works from recovery discs or from a dedicated recovery partition (select models
only) on the hard drive. However, computers that include a solid-state drive (SSD) may not have a recovery
partition. If that is the case, recovery discs have been included with your computer. Use these discs to recover your
operating system and software.
8–7
Backup and recovery
has its own built-in repair features, such as System Restore. If you have not already tried these
✎ Windows
features, try them before using Recovery Manager.
Manager recovers only the software that was preinstalled at the factory. Software not provided with
✎ Recovery
this computer must be downloaded from the manufacturer’s Web site or reinstalled from the disc provided by the
manufacturer.
To restore the system from the recovery discs:
1. Back up all personal files.
2. Insert the first recovery disc into the optical drive and restart the computer.
3. Follow the on-screen instructions.
Recovering using the partition on the hard drive (select models only)
with an SSD may not have a recovery partition. If the computer does not have a recovery partition,
✎ Computers
you will not be able to recover using this procedure. Recovery discs have been included for computers that do
not have a partition. Use these discs to recover your operating system and software.
On some models, you can perform a recovery from the partition on the hard drive, accessed by pressing either the
Start button or f11. This restores the computer to its factory condition.
To restore the system from the partition, follow these steps:
1. Access Recovery Manager in either of the following ways:
❏ Click Start, click All Programs, click Recovery Manager, and then click Recovery Manager.
– or –
❏ Turn on or restart the computer and press esc when the “Press the ESC key for Startup Menu” message is
displayed on the screen. Then, press f11 while the “Press <F11> for recovery” message is displayed on the
screen.
✎ It may take several minutes for Recovery Manager to load.
2. In the Recovery Manager window, click System Recovery.
3. Follow the on-screen instructions.
8–8
9
Connector pin assignments
Audio-in (microphone)
Pin
Signal
1
Audio signal in
2
Audio signal in
3
Ground
Audio-out (headphone)
Pin
Signal
1
Audio out, left channel
2
Audio out, right channel
3
Ground
9–1
Connector pin assignments
External monitor
9–2
Pin
Signal
1
Red analog
2
Green analog
3
Blue analog
4
Not connected
5
Ground
6
Ground analog
7
Ground analog
8
Ground analog
9
+5 VDC
10
Ground
11
Monitor detect
12
DDC 2B data
13
Horizontal sync
14
Vertical sync
15
DDC 2B clock
Connector pin assignments
HDMI
Pin
Signal
1
Transition minimized differential signal (TDMS) data 2+
2
TDMS data 2 shield
3
TDMS data 2-
4
TDMS data 1+
5
TDMS data 1 shield
6
TDMS data 1 shield
7
TDMS data 0+
8
TDMS data 0 shield
9
TDMS data 0-
10
TDMS clock +
11
TDMS data clock shield
12
TDMS data clock-
13
Consumer electronics control
14
Not connected
15
Display data channel (DDC) clock
16
DDC data
17
Ground
18
+5V power
19
Hot plug detect
9–3
Connector pin assignments
RJ-45 (network)
Pin
Signal
1
Transmit +
2
Transmit -
3
Receive +
4
Unused
5
Unused
6
Receive -
7
Unused
8
Unused
Universal Serial Bus
9–4
Pin
Signal
1
+5 VDC
2
Data
3
Data +
4
Ground
10
Power cord set requirements
The wide range input feature of the computer permits it to operate from any line voltage from 100 to 120 volts AC
or from 220 to 240 volts AC.
The 3-conductor power cord set included with the computer meets the requirements for use in the country or region
where the equipment is purchased.
Power cord sets for use in other countries and regions must meet the requirements of the country or region where
the computer is used.
Requirements for all countries and regions
The requirements listed below are applicable to all countries and regions:
■
The length of the power cord set must be at least 1.5 m (5.0 ft) and no more than 2.0 m (6.5 ft).
■
All power cord sets must be approved by an acceptable accredited agency responsible for evaluation in the
country or region where the power cord set will be used.
■
The power cord sets must have a minimum current capacity of 10 amps and a nominal voltage rating of 125 or
250 V AC, as required by the power system of each country or region.
■
The appliance coupler must meet the mechanical configuration of an EN 60 320/IEC 320 Standard Sheet C13
connector for mating with the appliance inlet on the back of the computer.
10–1
Power cord set requirements
Requirements for specific countries and regions
Country/region
Accredited agency
Applicable note number
Australia
EANSW
1
Austria
OVE
1
Belgium
CEBC
1
Canada
CSA
2
Denmark
DEMKO
1
Finland
FIMKO
1
France
UTE
1
Germany
VDE
1
Italy
IMQ
1
Japan
METI
3
The Netherlands
KEMA
1
Norway
NEMKO
1
The People's Republic of China
CCC
5
South Korea
EK
4
Sweden
SEMKO
1
Switzerland
SEV
1
Taiwan
BSMI
4
The United Kingdom
BSI
1
The United States
UL
2
1. The flexible cord must be Type HO5VV-F, 3-conductor, 1.0-mm² conductor size. Power cord set fittings (appliance coupler and wall
plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be used.
2. The flexible cord must be Type SPT-3 or equivalent, No. 18 AWG, 3-conductor. The wall plug must be a two-pole grounding type
with a NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration.
3. The appliance coupler, flexible cord, and wall plug must bear a “T” mark and registration number in accordance with the Japanese
Dentori Law. The flexible cord must be Type VCT or VCTF, 3-conductor, 1.00-mm² conductor size. The wall plug must be a
two-pole grounding type with a Japanese Industrial Standard C8303 (7 A, 125 V) configuration.
4. The flexible cord must be Type RVV, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler and wall
plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be used.
5. The flexible cord must be Type VCTF, 3-conductor, 0.75-mm² conductor size. Power cord set fittings (appliance coupler and wall
plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be used.
10–2
11
Recycling
Battery
When a battery has reached the end of its useful life, do not dispose of the battery in general household waste.
Follow the local laws and regulations in your area for computer battery disposal.
Display
Å
WARNING: The backlight contains mercury. Caution must be exercised when removing and handling the backlight to avoid
damaging this component and causing exposure to the mercury.
Ä
CAUTION: The procedures in this chapter can result in damage to display components. The only components intended for
recycling purposes are the liquid crystal display (LCD) panel and the backlight. When you remove these components, handle
them carefully.
Disposal. This HP product contains mercury in the backlight in the display assembly that might
✎ Materials
require special handling at end-of-life. Disposal of mercury may be regulated because of environmental
considerations. For disposal or recycling information, contact your local authorities, or see the Electronic
Industries Alliance (EIA) Web site at http://www.eiae.org.
This section provides disassembly instructions for the display assembly. The display assembly must be
disassembled to gain access to the backlight 1 and the liquid crystal display (LCD) panel 2.
procedures provided in this chapter are general disassembly instructions. Specific details, such as screw
✎ The
sizes, quantities, and locations, and component shapes and sizes, can vary from one computer model to another.
11–1
Recycling
Perform the following steps to disassemble the display assembly:
1. Remove all screw covers 1 and screws 2 that secure the display bezel to the display assembly.
2. Lift up and out on the left and right inside edges 1 and the top and bottom inside edges 2 of the display bezel
until the bezel disengages from the display assembly.
3. Remove the display bezel 3.
11–2
Recycling
4. Disconnect all display panel cables 1 from the display inverter and remove the inverter 2.
5. Remove all screws 1 that secure the display panel assembly to the display enclosure.
6. Remove the display panel assembly 2 from the display enclosure.
7. Turn the display panel assembly upside down.
8. Remove all screws that secure the display panel frame to the display panel.
11–3
Recycling
9. Use a sharp-edged tool to cut the tape 1 that secures the sides of the display panel to the display panel frame.
10. Remove the display panel frame 2 from the display panel.
11. Remove the screws 1 that secure the backlight cover to the display panel.
12. Lift the top edge of the backlight cover 2 and swing it outward.
13. Remove the backlight cover.
14. Turn the display panel right-side up.
15. Remove the backlight cables 1 from the clip 2 in the display panel.
11–4
Recycling
16. Turn the display panel upside down.
17. Remove the backlight frame from the display panel.
Å
WARNING: The backlight contains mercury. Exercise caution when removing and handling the backlight to avoid damaging
this component and causing exposure to the mercury.
18. Remove the backlight from the backlight frame.
11–5
Recycling
19. Disconnect the display cable 1 from the LCD panel.
20. Remove the screws 2 that secure the LCD panel to the display rear panel.
21. Release the LCD panel 3 from the display rear panel.
22. Release the tape 4 that secures the LCD panel to the display rear panel.
23. Remove the LCD panel.
24. Recycle the LCD panel and backlight.
11–6
Index
1394 Power Saving 5–4
A
AC adapter light 2–6
AC adapter, spare part numbers 3–16, 3–17, 3–23
administrator password 5–3
antenna
disconnecting 4–17
locations 2–1
removal 4–37
spare part number 3–13, 3–22, 4–37
audio board
removal 4–40
spare part number 3–4, 3–22, 3–25, 4–40
audio product description 1–4
audio-in jack
connector pinout 9–1
location 2–6
audio-out jack
connector pinout 9–1
location 2–6
B
backing up
customized window, toolbar, and menu bar settings
8–2
personal files 8–2
templates 8–2
backup 8–6
backup suggestions 8–2
base enclosure, spare part number 3–6, 3–22
battery
removal 4–7
spare part numbers 3–6, 3–21, 4–7
battery bay 2–8
battery light 2–4, 2–6
battery release latch 2–8
Bluetooth cable, spare part number 3–24
Bluetooth module
removal 4–39
spare part number 3–4, 3–17, 3–23, 4–39
Bluetooth module cable, spare part number 3–4, 3–22,
4–39
Blu-ray ROM DVD±R/RW SuperMulti DL Drive
precautions 4–2
removal 3–22, 4–20
spare part number 3–25
spare part numbers 3–6, 3–16, 3–22, 4–20
specifications 6–4
boot options 5–4
boot order 5–4
bottom components 2–8
button components 2–2
button sound 5–4
buttons
power 2–2
TouchPad 2–5
TouchPad on/off 2–5
volume mute 2–2
wireless 2–2
C
cables, service considerations 4–1
caps lock light 2–4
Card Reader Power Saving 5–4
changing the Setup Utility language 5–1
chipset product description 1–2
components
bottom 2–8
buttons 2–2
display 2–1
fingerprint reader 2–2
front 2–6
keys 2–3
left-side 2–6
lights 2–4
pointing device 2–5
right-side 2–7
top 2–1
computer feet
locations 4–6
spare part number 4–6
computer specifications 6–1
connector pinout
audio-in jack 9–1
audio-out jack 9–1
external monitor port 9–2
HDMI port 9–3
headphone jack 9–1
microphone jack 9–1
monitor port 9–2
Index-1
network jack 9–4
RJ-45 jack 9–4
USB port 9–4
connectors, service considerations 4–1
consumer infrared lens 2–6
ExpressCard slot bezel, illustrated 3–14
external media card product description 1–4
external monitor port
connector pinout 9–2
location 2–7
D
F
Diagnostics menu, Setup Utility 5–4
Digital Media Slot 2–7
Digital Media Slot light 2–7
display assembly
removal 4–32
spare part numbers 3–3, 3–22, 3–24, 3–25, 3–26,
4–32
display bezel
removal 4–34
spare part numbers 3–13, 3–22, 3–24, 3–25, 3–26,
4–34
display components 2–1
illustrated 2–1
recycling 11–1
display enclosure
removal 4–34
spare part number 3–13, 3–22
display hinge
removal 4–36
spare part number 3–13, 3–22, 3–24, 4–36
display inverter, removal 11–3
display panel
product description 1–2
removal 4–35
spare part number 3–13, 3–21
display panel cable
removal 4–36
spare part number 3–13, 3–22, 4–36
displaying system information 5–2
drive light 2–4, 2–6
drives, boot order 5–4
DVD±RW and CD-RW SuperMulti Double-Layer
Drive
precautions 4–2
removal 3–22, 4–20
spare part number 3–6, 3–16, 3–22, 3–25, 4–20
specifications 6–5
f11 recovery 8–4
fan always on 5–4
fan/heat sink assembly
removal 4–46
spare part numbers 3–5, 3–22, 3–24, 4–46
feet
locations 4–6
spare part number 4–6
fingerprint reader 2–2
fingerprint reader board
removal 4–30
spare part number 3–4, 3–22, 4–30
fingerprint reader, using in the Setup Utility 5–1
fn key 2–3
front components 2–6
full system recovery 8–1
function keys 2–3
E
electrostatic discharge 4–2
equipment guidelines 4–4
eSATA/USB port 2–7
esc key 2–3
Ethernet product description 1–4
exiting the Setup Utility 5–3
ExpressCard remote control, spare part number 3–16,
3–17
ExpressCard slot 2–7
Index-2
G
graphics product description 1–2
grounding equipment and methods 4–2
H
hard drive
precautions 4–2
product description 1–3
removal 4–8
spare part numbers 3–11, 3–12, 3–15, 3–21, 3–23,
3–24, 3–25, 3–26, 4–8
specifications 6–3
hard drive bay 2–8
hard drive bracket, removal 4–10
hard drive cover
illustrated 3–14
removal 4–9
Hard Drive Hardware Kit, spare part number 3–12,
3–15, 3–22, 4–8
hard drive self test 5–4
HDMI port
connector pinout 9–3
location 2–7
headphone jack
connector pinout 9–1
location 2–6
headset, spare part number 3–16, 3–17
hinge
removal 4–36
spare part number 3–13, 3–22, 3–24, 4–36
I
M
infrared lens 2–6
internal display switch 2–1
Main menu, Setup Utility 5–3
mass storage devices, spare part numbers 3–15
memory module
removal 4–11
spare part numbers 3–11, 3–26, 4–11
memory product description 1–3
memory test 5–4
microphone 2–1
product description 1–4
removal 4–37
spare part number 3–13, 3–22, 4–37
microphone jack
connector pinout 9–1
location 2–6
model name 3–1, 4–5
monitor port
connector pinout 9–2
location 2–7
J
jacks
audio-in 2–6
audio-out 2–6
headphone 2–6
microphone 2–6
network 2–7
RJ-45 2–7
K
key components 2–3
keyboard
product description 1–5
removal 4–22
spare part numbers 3–3, 3–21, 4–22
keyboard cover
removal 4–24
spare part number 3–3, 3–22, 4–24
keys
esc 2–3
fn 2–3
function 2–3
numeric keypad 2–3
Windows applications 2–3
Windows logo 2–3
L
LAN Power Saving 5–4
language support, Setup Utility 5–4
LED board
removal 4–38
spare part number 3–4, 3–22, 4–38
left speaker
removal 4–31
spare part number 4–31
left-side components 2–6
light components 2–4
lights
AC adapter 2–6
battery 2–4, 2–6
caps lock 2–4
Digital Media Slot 2–7
drive 2–4, 2–6
num lock 2–4
optical drive 2–6
power 2–4, 2–6
TouchPad 2–5
volume down 2–4
volume mute 2–4
volume up 2–4
wireless 2–4
N
navigating in the Setup Utility 5–2
network jack
connector pinout 9–4
location 2–7
num lock light 2–4
numeric keypad keys 2–3
O
operating system product description 1–6
optical drive
location 2–6
precautions 4–2
product description 1–3
removal 4–20
spare part numbers 3–6, 3–16, 4–20
specifications 6–4, 6–5
optical drive bracket, removal 4–21
optical drive light 2–6
P
packing guidelines 4–3
passwords 5–3
plastic parts 4–1
Plastics Kit
contents 3–14
spare part number 3–4, 3–22
pointing device
components 2–5
illustrated 2–5
product description 1–5
ports
eSATA/USB 2–7
external monitor 2–7
HDMI 2–7
Index-3
monitor 2–7
product description 1–5
USB 2–6
power button 2–2
power connector 2–6
power connector and cable
removal 4–42
spare part number 3–4, 3–22, 4–42
power cord
set requirements 10–1
spare part numbers 3–16, 3–17
power light 2–4, 2–6
power requirements product description 1–5
power-on password 5–3
processor
product description 1–1
removal 4–51
spare part numbers 3–5, 3–19, 3–22, 3–23, 3–24,
4–51
Processor C6 State 5–4
product description
audio 1–4
chipset 1–2
display panel 1–2
Ethernet 1–4
external media card 1–4
graphics 1–2
hard drive 1–3
keyboard 1–5
memory 1–3
microphone 1–4
operating system 1–6
optical drive 1–3
pointing device 1–5
ports 1–5
power requirements 1–5
processor 1–1
security 1–5
serviceability 1–6
webcam 1–4
wireless 1–4
product name 1–1, 3–1, 4–5
R
recovering a program or driver 8–1
recovering from the dedicated recovery partition 8–4
recovering from the recovery discs 8–4
recovery discs 8–1, 8–5
Recovery Manager 8–1, 8–4
recovery partition 8–1
recovery, system 8–1, 8–4
recycling
battery 11–1
display components 11–1
Index-4
removal/replacement
preliminaries 4–1
procedures 4–5
restore points 8–3, 8–7
restoring default settings in the Setup Utility 5–2
right speaker
removal 4–26
spare part number 4–26
right-side components 2–7
RJ-45 jack
connector pinout 9–4
location 2–7
RTC battery
removal 4–19
spare part number 3–11, 3–22, 4–19
Rubber Feet Kit, spare part number 3–6, 3–22, 4–6
rubber hard drive bumpers, spare part number 3–23
S
safeguarding information 8–1
Screw Kit, spare part number 3–17, 3–22
screw listing 7–1
secondary hard drive self test 5–4
security cable slot 2–7
Security menu, Setup Utility 5–3
security product description 1–5
selecting in the Setup Utility 5–2
service considerations 4–1
serviceability product description 1–6
Setup Utility
changing the language 5–1
Diagnostics menu 5–4
exiting 5–3
Main menu 5–3
menus 5–3
navigating and selecting 5–2
restoring default settings 5–2
Security menu 5–3
starting 5–1
System Configuration menu 5–4
using 5–1
slots
Digital Media 2–7
ExpressCard 2–7
security cable 2–7
solid-state drive (SSD) 8–1, 8–4
solid-state drive, spare part number 3–12, 3–15, 3–24,
4–8
speaker assembly
removal 4–26, 4–31
spare part number 3–3, 3–22, 4–26, 4–31
specifications
Blu-ray ROM DVD±R/RW SuperMulti DL Drive
6–4
computer 6–1
display assembly 6–2
DVD±RW and CD-RW SuperMulti Double-Layer
Drive 6–5
hard drive 6–3
optical drive 6–4, 6–5
system DMA 6–6
system I/O address 6–9
system interrupt 6–8
system memory map 6–7
supported discs 8–2
system board
removal 4–43
spare part numbers 3–4, 3–23, 3–24, 4–43
System Configuration menu, Setup Utility 5–4
system DMA specifications 6–6
system failure or instability 8–4
system I/O address specifications 6–9
system information
backing up 8–2
overview 5–3
system interrupt specifications 6–8
system memory map specifications 6–7
system recovery 8–1, 8–4
system restore points 8–3, 8–7
T
tools required 4–1
top components 2–1
top cover
removal 4–27
spare part numbers 3–3, 4–27
TouchPad 2–5
TouchPad button 2–5
TouchPad light 2–5
TouchPad on/off button 2–5
TouchPad scroll zone 2–5
W
warranty period 3–1, 4–5
webcam
location 2–1
product description 1–4
webcam light 2–1
webcam module
removal 4–35
spare part number 3–13, 3–22, 4–35
Windows applications key 2–3
Windows logo key 2–3
wireless antenna
disconnecting 4–17
locations 2–1
removal 4–37
spare part number 3–13, 3–22, 4–37
wireless button 2–2
wireless light 2–4
wireless module compartment 2–8
wireless module compartment cover
illustrated 3–14
removal 4–17
wireless product description 1–4
WLAN module
removal 4–12
spare part numbers 3–6, 3–7, 3–8, 3–9, 3–10, 3–11,
3–17, 3–18, 3–19, 3–20, 3–21, 3–23, 3–24, 3–25,
4–12, 4–14, 4–15, 4–16
WLAN module bracket, removal 4–17
workstation guidelines 4–4
U
Universal Serial Bus (USB) port
connector pinout 9–4
location 2–6
USB board
removal 4–41
spare part number 3–4, 3–22, 4–41
using system restore 8–3
V
vents 2–7, 2–8
Virtualization Technology 5–4
volume down light 2–4
volume mute button 2–2
volume mute light 2–4
volume scroll zone 2–2
volume up light 2–4
Index-5
Index-6