Operating and installation instructions Induction wok

Operating and installation instructions
Induction wok
To avoid the risk of accidents or damage to the appliance, it is essential
to read these instructions before it is installed and used for the first time.
en - AU, NZ
M.-Nr. 07 235 351
Contents
Description of the appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Warning and safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Caring for the environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Before using for the first time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Induction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
The induction principle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Suitable pans . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Switching on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Residual heat indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Auto heat-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Booster function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Safety features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Safety switch-off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Overheating protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Problem solving guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Optional accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Safety instructions for installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Safety clearances. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Appliance and building-in dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Preparing the worktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
2
Contents
Installation of several appliances. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Fixing the spring clamps and spacer bars . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Installing/removing the appliance(s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
General installation tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
After sales service, data plate, warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
3
Description of the appliance
a Wok basin
(C 300 mm / Rating: 2400 W
With booster: 3200 W)
b Wok pan
c Control knob
d Indicators
e Display
4
Indicators
f In-operation indicator
g Booster indicator
h Residual heat indicator
Description of the appliance
Display
ß No wok on cooking zone or wok unsuitable
A Auto heat-up
I Booster in operation
L Safety lock (see "Safety features")
Accessories supplied
Wok pan CSWP 1400
Wok rest
5
Warning and safety instructions
Correct application
This appliance complies with all
relevant local and national safety
requirements. Inappropriate use
can, however, lead to personal
injury and damage to property.
To avoid the risk of accidents and
damage to the appliance, please
read these instructions carefully
before using it for the first time.
They contain important notes on
installation, safety, use and
maintenance.
Keep these instructions in a safe
place and ensure that new users are
familiar with the content. Pass them
on to any future owner.
~ This appliance is designed for
domestic use and for use in similar
environments by guests in hotel or
motel rooms, bed & breakfasts and
other typical living quarters. This does
not include common/shared facilities or
commercial facilities within hotels,
motels or bed & breakfasts.
~ This appliance must only be used to
cook food and keep it warm.
Any other usage is at the owner's risk
and could be dangerous. Miele cannot
be held liable for damage resulting
from incorrect or improper use or
operation.
~ This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience or knowledge, unless they
have been given supervision or
instruction concerning its use by a
person responsible for their safety.
~ This cooktop is not suitable for
outdoor use.
~ This appliance must not be installed
and used in mobile installations such as
ships etc.
~ Do not modify this appliance.
6
Warning and safety instructions
Safety with children
~ Activate the system lock to ensure
that children cannot switch on the
appliance inadvertently.
~ Children should be supervised to
ensure that they do not play with the
appliance.
~ Packaging, e.g. cling film,
polystyrene and plastic wrappings,
must be kept out of the reach of babies
and young children. Danger of
suffocation. Dispose of or recycle all
packaging safely as soon as possible.
~ Older children may only use the
induction wok when its operation has
been clearly explained to them and
they are able to use it safely,
recognising the dangers of misuse.
~ The appliance gets hot when in use
and remains hot for quite a while after
being switched off. To safeguard
against burning, keep children well
away from the appliance at all times.
~ Do not store anything which might
arouse a child's interest in storage
areas above or next to the appliance.
Otherwise they could be tempted into
climbing onto the appliance with the
risk of burning themselves.
~ Take care that children are not able
to pull the wok down off the appliance.
Turn the wok handle inwards away from
the edge of the appliance. Danger of
burning or scalding.
7
Warning and safety instructions
Technical safety
~ Before installation, check the
appliance for visible signs of damage.
Do not install and use a damaged
appliance. A damaged appliance is
dangerous.
~ The electrical safety of this
appliance can only be guaranteed
when continuity is complete between it
and an effective earthing system which
complies with local and national safety
regulations. It is most important that this
basic safety requirement is present and
regularly tested and, where there is any
doubt, the household wiring system
should be inspected by a qualified
electrician. The manufacturer cannot be
held liable for the consequences of an
inadequate earthing system (e.g.
electric shock).
~ Before connecting the appliance,
make sure that the connection data on
the data plate (voltage and rated load)
match the mains electricity supply.
This data must correspond in order to
avoid the risk of damage to the
appliance. Consult a qualified
electrician if in any doubt.
~ For safety reasons, this appliance
may only be used after it has been built
in.
8
~ Never open the housing of the
appliance.
Tampering with electrical connections
or components and mechanical parts is
highly dangerous to the user and can
cause operational faults.
~ Installation, maintenance and
repairs may only be carried out by a
suitably qualified and competent
person authorised by Miele in strict
accordance with current national and
local safety regulations.
Repairs and other work by unqualified
persons could be dangerous. Miele
cannot be held liable for unauthorised
work.
~ During installation, maintenance and
repair work, the appliance must be
disconnected from the mains electricity
supply. It is only completely isolated
from the electricity supply when:
– the mains fuse is disconnected,
– the screw-out fuse is removed (in
countries where this is applicable),
– it is switched off at the wall socket
and the plug is withdrawn from the
socket, or it is switched off at the
isolator.
Warning and safety instructions
~ While the appliance is under
warranty, repairs should only be
undertaken by a service technician
authorised by Miele. Otherwise the
warranty is invalidated.
~ Faulty components must only be
replaced by genuine Miele original
spare parts. The manufacturer can only
guarantee the safety of the appliance
when Miele replacement parts are
used.
~ If the connection cable is damaged,
it must be replaced by a suitably
qualified electrician with a special
connection cable of type H 05 VV-F
(pvc insulated), available from Miele.
~ Do not connect the appliance to the
mains electricity supply by a
multi-socket unit or an extension lead.
These do not guarantee the required
safety of the appliance (e.g. danger of
overheating).
~ If the appliance is supplied without a
plug, or if the plug is removed, it must
be connected to the mains electricity
supply by a suitably qualified and
competent electrician in strict
accordance with current local and
national safety regulations. The
manufacturer cannot be held liable for
damage caused by incorrect
installation or connection.
~ In areas which may be subject to
infestation by cockroaches or other
vermin, pay particular attention to
keeping the appliance and its
surroundings in a clean condition at all
times. Any damage caused by
cockroaches or other vermin will not be
covered by the warranty.
~ This appliance is not intended to be
operated by means of an external timer
or separate remote control system.
~ Do not use the induction wok if the
ceramic surface is cracked, chipped or
damaged in any way. Switch it off immediately, and disconnect it from the
mains electricity supply. Otherwise
there is a danger of electric shock.
9
Warning and safety instructions
Correct use
~ For people fitted with a heart
pacemaker:
Please note that the area immediately
surrounding the induction wok is
electromagnetically charged, and that
this could affect a pacemaker.
If in any doubt, consult the
manufacturer of the pacemaker or your
doctor.
~ To prevent damage to items which
are susceptible to magnetic fields, e.g.
credit cards, diskettes, pocket
calculators etc, do not leave them in the
immediate vicinity of the wok.
~ Only use the wok pan supplied with
the appliance. For safety reasons, other
woks should not be used: fire hazard.
See "Induction - Suitable pans".
~ The appliance gets hot when in use
and remains hot for quite a while after
being switched off. There is a danger of
burning until the residual heat
indicators go out.
~ Do not leave the appliance
unattended whilst it is in use.
Pans that have boiled dry can cause
damage to the ceramic surface for
which the manufacturer cannot be held
liable.
Boiling fat or oil could ignite and cause
a fire.
10
~ If oil or fat does catch fire, do not
attempt to put out the flames with water.
Use a suitable fire blanket, saucepan
lid, damp towel or similar to smother the
flames.
~ For added protection, it is advisable
to use heat-resistant pot holders or
gloves when using the appliance. Do
not let them get damp or wet, as this
causes heat to transfer through the
material more quickly with the risk of
scalding or burning yourself.
~ Do not flambé under a rangehood.
The flames could set the rangehood on
fire.
~ Do not use the appliance as a
resting place for anything else.
Take particular care never to place
cutlery or other metal objects on the
appliance. When the appliance is
switched on either deliberately or by
mistake, or when there is residual heat
present, there is the risk of metal
objects heating up, with a danger of
burning.
Depending on the material, other
objects left on the appliance could also
melt or catch fire.
Switch the appliance off after use.
~ Installing several appliances
Do not place any hot pots or pans near
the spacer bar as they could damage
the sealing strip of the spacer bar.
Warning and safety instructions
~ Do not cover the appliance, e.g.
with a covering plate, a cloth, kitchen
foil etc. If the appliance is switched on
by mistake, or if there is residual heat,
these materials may catch fire, shatter
or melt.
~ Keep the ceramic surface clean.
Grains of salt, sugar and sand (e.g.
from cleaning vegetables) can cause
scratches.
~ Never place hot pans on the area
around the controls. This could damage
the electronic unit underneath.
~ Do not drop anything on the ceramic
surface. Even a light object could
cause damage in certain
circumstances.
~ Do not allow either solid or liquid
sugar, or pieces of plastic or aluminium
foil to get onto the cooking zones when
they are hot. If this should occur, switch
off the appliance, and carefully scrape
off all the sugar, plastic or aluminium
residues from the cooktop whilst they
are still hot, using a shielded scaper
blade.
Take care not to burn yourself.
Once the residues have been removed,
allow the appliance to cool down, and
then clean with a suitable proprietary
ceramic cooktop cleaner.
~ This appliance is fitted with a
cooling fan. If a drawer is fitted directly
underneath the wok, ensure that there
is sufficient space between the drawer
and its contents and the underside of
the appliance in order to ensure
sufficient ventilation for the wok. Do not
store pointed or small items or paper in
the drawer. They could get in through
the ventilation slots or be sucked into
the housing by the fan and damage the
fan or impair cooling.
~ Spray canisters, aerosols and other
inflammable substances must not be
stored in a drawer under the wok.
Cutlery inserts must be heat-resistant.
~ Metal utensils stored in a drawer
under the wok can become hot if the
appliance is used intensively for a long
time.
~ When using an electrical appliance,
e.g. a hand-held mixer, near the wok,
ensure that the connection cable
doesn't come into contact with the wok.
The insulation on the cable could
become damaged, giving rise to an
electric shock hazard.
11
Warning and safety instructions
~ If the induction wok is built-in behind
a furniture door, it must only be
operated when the door is open.
Close the furniture door only once the
appliance has been switched off and
the residual heat indicators have gone
out.
Miele cannot be held liable for
damage caused by non-compliance
with these Warning and Safety
instructions.
12
Caring for the environment
Disposal of the packing
material
Disposal of your old appliance
or machine
The transport and protective packing
has been selected from materials which
are environmentally friendly for disposal
and can normally be recycled.
Electrical and electronic appliances /
machines often contain materials
which, if handled or disposed of
incorrectly, could be potentially
hazardous to human health and to the
environment. They are, however,
essential for the correct functioning of
your appliance or machine. Therefore,
please do not dispose of your old
machine or appliance with your
household waste.
Ensure that any plastic wrappings,
bags, etc. are disposed of safely and
kept out of the reach of babies and
young children. Danger of suffocation.
Rather than just throwing these
materials away, please ensure they are
offered for recycling.
Please dispose of it at your local
community waste collection / recycling
centre and ensure that it presents no
danger to children while being stored
for disposal.
It should be unplugged or
disconnected from the mains electricity
supply by a competent person.
The plug must be rendered useless
and the cable cut off directly behind the
appliance or the machine to prevent
misuse.
13
Before using for the first time
Please stick the extra data plate for the
appliance supplied with this
documentation in the space provided in
the "After sales service" section of this
booklet.
Cleaning for the first time
^ Remove any protective wrapping and
adhesive labels.
^ Before using for the first time, clean
the appliance with a damp cloth only
and then wipe dry.
Do not use washing up liquid to
clean the ceramic surface as it can
leave a blue sheen which may be
difficult to remove.
14
Before using for the first time
When the induction wok is first
connected, and after a power cut, all of
the indicators in the display light up for
approx. 1 second for testing purposes.
The appliance can be used as soon as
the indicators go out.
When the appliance is used for the
first time, it may give off a slight
smell. The smell and any vapours will
dissipate after a short time.
They do not indicate a faulty
connection or appliance, and they
are not harmful to your health.
Please note that the heating-up time
of induction cooktops is much shorter
than that of conventional cooktops.
Induction
The induction principle
An induction coil is located underneath
the induction wok. When the appliance
is switched on, this coil creates a
magnetic field. This magnetic field in
turn creates, or induces, current in the
base of the wok on it. This heats up the
base of the wok. The wok basin itself is
heated up indirectly by the heat given
off by the wok pan.
Take particular care never to place
cutlery or other metal objects on the
appliance. When the appliance is
switched on either deliberately or by
mistake, or when there is residual
heat present, there is the risk of
metal items heating up with the
danger of burning.
Switch the appliance off after use.
The appliance only works when the wok
supplied is used (see "Suitable pans").
Induction heating does not work...
– if it is switched on without the wok in
place.
– if the wok is removed from the
appliance whilst it is switched on.
If this happens, ß will flash in the
display.
If the wok is replaced within 3 minutes,
the ß symbol will go out and you can
continue as normal.
If the wok is not replaced, the induction
wok will switch off automatically after 3
minutes. 0 and C flash alternately in the
display.
To use the induction wok again, first
turn the control to "0".
15
Induction
Noises
Suitable pans
The following noises might occur when
the induction wok is in operation:
Only use the wok supplied with the
appliance for cooking food.
This wok is designed specifically for the
appliance.
– On the higher power settings, it
might buzz. This will decrease or
cease altogether when the power
setting is reduced.
– You might hear a clicking sound from
the electronic switches, especially on
lower settings.
The appliance has a cooling fan to help
extend the life of the electronics. When
the appliance is being used intensively,
this will come on and you will hear a
whirring sound. The fan may continue
to run after the appliance has been
switched off.
16
,If other woks are used, there is a
risk of fat or food overheating, and
burning.
Operation
Switching on and off
Do not leave the appliance
unattended whilst it is being used.
The induction wok is switched on by
turning the control clockwise a to the
power setting required, and is switched
off by turning the control
anti-clockwise b to "0".
Residual heat indicator
The residual heat indicator remains on
until the induction wok is cool enough
to touch.
Do not touch or place any heat
sensitive objects on the induction
wok while the residual heat display
is still on.
Danger of burning.
Do not turn the control to "0" by
turning it past BI.
When the induction wok is switched on,
the in-operation indicator lights up.
Once it has reached a certain
temperature, the residual heat indicator
also lights up.
After the appliance has been switched
off, the in-operation indicator goes out.
17
Operation
Settings
Cooking process
Settings
Keeping food warm,
melting chocolate
1-2
Warming food up
3-6
Stir-frying, e.g. Chinese
dishes
7- 9
Auto heat-up
Continued
cooking setting
Heat-up time
in minutes and
seconds (approx.)
1
0 : 15
2
0 : 15
3
0 : 25
4
0 : 50
5
2 : 00
6
5 : 50
7
2 : 50
8
2 : 50
9
-
When Auto heat-up has been activated,
the induction wok switches on
automatically at the highest setting and
then switches to the continued cooking
setting selected. The heat-up time
depends on which continued cooking
setting has been chosen (see chart).
Taking the wok off the zone whilst Auto
heat-up is in operation interrupts the
Auto heat-up. It will resume if the wok is
placed back on the appliance within 3
minutes.
Activating Auto heat-up
^ Turn the control anti-clockwise as far
as it will go, and hold in that position
until A appears in the display.
If you hold the control for too long, L
will appear in the display which
means that the lock has been
activated (see "Safety features Lock").
^ Turn the control clockwise to the
continued cooking setting required.
Auto heat-up will not be activated if you
do not select a continued cooking
setting within 5 seconds.
The continued cooking setting can be
changed during the first 10 seconds
after Auto heat-up has been activated;
after that, it cannot be changed.
Changing the continued cooking
setting after 10 seconds deactivates
Auto heat-up.
An A lights up in the display during the
Auto heat-up phase.
18
Operation
Booster function
To switch on the booster function
The induction wok is equipped with a
booster function which increases the
power level.
If activated, the appliance will operate
on power setting 9 with an extra boost
of power for a period of 10 minutes.
^ Turn the control past power setting 9
to BI, and then back to 9.
Taking the wok off the appliance whilst
the booster is in operation interrupts the
booster. It will resume if the wok is
placed back on the appliance within
3 minutes.
I appears in the display, and the B
indicator also lights up.
After 10 minutes the appliance will
automatically switch down to power
setting 9, and the B indicator and the I
symbol in the display goes out.
To switch off the booster function
The booster function can be cancelled
early.
If the wok reaches its maximum
permitted temperature before
10 minutes is up, the booster
function switches off and the
appliance resumes at power setting
9.
Only the wok supplied has this
safety feature, which ensures that
the appliance switches off when it
gets too hot.
^ Turn the control past power setting 9
to BI; or reduce the power setting.
19
Safety features
Lock
To deactivate the system lock
The induction wok is fitted with a safety
lock to prevent unauthorised use, e.g.
by children.
^ Turn the control anti-clockwise as far
as it will go, and hold in that position
until the L goes out, and 0 appears
briefly in the display.
To activate the lock
^ Turn the control anti-clockwise as far
as it will go, and hold in that position
until L appears in the display.
Every time the control is touched after
this, an L will show in the display for
3 seconds.
20
Safety features
Safety switch-off
Power setting
Maximum
operating time in
hours
If the induction wok is heated for an
unusually long period of time (see
chart), and the power setting is not
altered, it will switch itself off
automatically.
1
10
2
5
3
5
4
4
C and 0 will flash alternately in the
display.
5
3
6
2
7
2
8
2
9
1
The induction wok is fitted with a safety
switch-off feature in case you forget to
switch it off yourself.
To use the induction wok again, first
turn the control to "0". The indicator light
and the display will go out.
21
Safety features
Overheating protection
The induction coil can overheat if
The induction coil is equipped with
overheating protection. Before the
induction coil gets too hot, overheating
protection cuts in in one of the following
ways:
– the appliance is used for too long at
maximum power.
– If the booster function is being used
it will be switched off.
– If the temperature continues to rise
after the booster function is switched
off, the power setting will be
reduced.
– If the temperature continues to rise
after the power setting has been
reduced, the induction wok will
switch off and H will appear in the
display.
^ Turn the control to "0".
The induction wok can only be used
again in the normal way after the H has
gone out.
If the control is not turned back to "0", C
and 0 will flash in the display alternately
once the induction wok has cooled
down sufficiently. To use the induction
wok again, first turn the control to "0".
22
– the appliance is not well enough
ventilated.
If a drawer is fitted directly underneath
the appliance, there must be sufficient
space between the drawer and its
contents and the underside of the
appliance in order to ensure sufficient
ventilation for the induction wok.
If the overheating protection device
trips again, contact Miele.
Cleaning and care
Miele offer a range of branded cleaning
and conditioning products. See
"Optional accessories".
,Under no circumstances use a
steam cleaning appliance to clean
this appliance . The steam could
attack the electrical components
and cause a short circuit.
Pressurised steam could also cause
permanent damage to the surface
and to other components, for which
the manufacturer cannot accept
liability.
The appliance should be cleaned after
each use. Let it cool down to room
temperature.
To avoid water marks and limescale
deposits, use a soft cloth to dry
surfaces that have been cleaned with
water.
To avoid damaging the surface of
your appliance, do not use:
– cleaning agents containing soda,
alaklines, ammonia, acids or
chlorides,
– cleaning agents containing
descaling agents,
– stain or rust removers,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– solvent-based cleaning agents,
– dishwasher cleaner,
– grill and oven cleaners,
– glass cleaning agents,
– hard, abrasive brushes or sponges,
e.g. pot scourers, brushes or
sponges which have been previously
used with abrasive cleaning agents,
– sharp pointed objects
(these can damage the seal between
the frame and the worktop).
23
Cleaning and care
Ceramic surface
Do not use washing-up liquid to
clean the ceramic surface. Using
washing-up liquid will not remove all
soiling and an invisible film will be left
behind which will result in a
permanent discolouration of the
ceramic surface.
Clean the cooktop regularly with a
special ceramic cleaning agent.
Should any sugar, plastic or
aluminium foil spill or fall onto the hot
appliance while it is in use, first switch
off the appliance. Then immediately,
while the surface is still hot, use a
shielded scraper blade to scrape off
the sugar, plastic or aluminium foil,
taking care not to burn yourself.
Allow the appliance to cool down, and
then clean as described above with a
suitable proprietary ceramic and
stainless steel cooktop cleaner.
Remove light soiling with a damp cloth.
Then clean the appliance with the
Original Miele ceramic and stainless
steel cooktop cleaner (see "Optional
accessories"), applied with kitchen
paper or a clean cloth. Do not apply
cleaner whilst the appliance is still hot,
as this could result in marking. Please
follow the manufacturer's instructions.
Finally, wipe the appliance with a damp
cloth, then polish with a soft, dry cloth.
Ensure that all cleaner residues are
removed. Residues can burn onto the
appliance the next time it is used, and
cause damage to the ceramic surface.
Spots caused by limescale, water and
aluminium residues (spots with a
metalic appearance) can be removed
using the ceramic and stainless steel
cooktop cleaner.
24
Stainless steel
The Original Miele ceramic and
stainless steel cooktop cleaner is
suitable for cleaning stainless steel
surfaces (see "Optional accessories").
To help prevent resoiling, we
recommend a stainless steel
conditioner (see "Accessories").
Apply sparingly with a soft cloth.
Do not use stainless steel cleaning
agents on printed surfaces. This
would rub off the print. These areas
should be only cleaned with a
microfibre cloth or with a solution of
warm water and a little washing-up
liquid applied with a soft sponge.
Problem solving guide
,Installation work and repairs to
electrical appliances must only be
carried out by a suitably qualified
and competent person in strict
accordance with current local and
national safety regulations. Repairs
and other work by unqualified
persons could be dangerous. The
manufacturer cannot be held liable
for unauthorised work.
If none of the above is the case, then
turn the control to "0", and disconnect
the appliance from the electricity
supply for approx. 1 minute.
Reset the trip switch in the mains fuse
box, and switch the appliance back on.
If it still will not switch on, contact a
qualified electrician or Miele.
... ß appears in the display.
Check whether the empty appliance
has been left switched on inadvertently.
What to do if...
... the appliance does not heat up.
Check whether
– the safety lock is activated.
If necessary, deactivate it (see
"Safety lock").
... F and 01 flash alternately in the
display.
Check whether the control is damaged
or stuck.
If this is not the case, call Miele.
– the mains fuse has tripped.
– the overheating protection
mechanism has been triggered (see
"Overheating protection").
– the demo mode has been activated.
When demo mode has been
activated, the "d" symbol will appear
in the display for a second.
To deactivate demo mode, turn the
control anti-clockwise as far as it will
go twice briefly (<1 second), then
turn it again and hold for approx. 3
seconds.
... F and a number flash alternately in
the display.
Call Miele.
... the induction wok switches off
automatically.
The safety switch-off feature or the
overheating protection mechanism has
been triggered (see "Safety switch-off"
and "Overheating protection").
25
Problem solving guide
... one of the following has occurred:
– The booster has automatically
switched off early.
– C and 0 flash alternately in the
display.
The overheating protection mechanism
has been triggered (see "Overheating
protection").
... the food in the wok hardly heats
up or does not heat up at all when
the Auto heat-up function is switched
on.
This might be because a large quantity
of food is being cooked.
Select a higher continued cooking
setting.
26
... The cooling fan continues to run
after the appliance has been
switched off.
This is not a fault. The fan will continue
running until the appliance has cooled
down. It will then switch itself off
automatically.
Optional accessories
Miele offers a range of useful accessories, as well as
cleaning and conditioning products for your appliance.
Depending on country, these can be ordered online at:
These products can also be obtained by contacting Miele
(see back of instructions for contact details).
Wok pan CSWP 1400
Cleaning and care products
Original Miele ceramic and stainless steel cooktop cleaner
250 ml
Removes heavy soiling, limescale deposits and aluminium
residues.
Original Miele stainless steel conditioning agent
250 ml
Removes water marks, flecks and finger prints.
Helps keep the appliance looking good for longer.
Original Miele all-purpose microfibre cloth
Removes finger marks and light soiling.
27
Safety instructions for installation
Fit the wall units and rangehood
before fitting the cooktop to avoid
damaging the surface.
~ The veneer or laminate coatings of
worktops (or adjacent kitchen units)
must be treated with 100 °C
heat-resistant adhesive which will not
dissolve or distort.
Any backmoulds must be of
heat-resistant material.
~ This appliance must not be installed
and used in mobile installations such as
ships etc.
~ After installation, ensure that the
connection cable is without hindrance
and that there is no mechanical
obstruction which could damage it,
such as a drawer.
~ If an interim shelf is installed under
the appliance, there must be a
minimum gap of 40 mm between the
top of the shelf and the underside of the
appliance.
~ This appliance must not be installed
over a dishwasher, washing machine,
tumble dryer, refrigerator or freezer.
The high temperatures radiated by the
cooktop could damage the appliance
below.
28
~ Observe carefully the safety
distances given on the following pages.
All dimensions in this instruction booklet
are given in mm.
Safety clearances
Safety clearance above the cooktop
When two or more appliances are
installed together below a
rangehood, e.g. an electric cooktop
and a gas wok combiset, which
have different safety clearances
given in the installation instructions,
you should select the greater
clearance of the two.
A minimum safety clearance must be
maintained between the cooktop and
the rangehood above it. See the
rangehood manufacturer's operating
and installation instructions for details.
If the manufacturer's instructions are
not available for the rangehood, a
minimum safety clearance of at least
760 mm must be maintained. For any
flammable objects, e.g. utensil rails,
wall units etc., a minimum clearance of
at least 760 mm must be maintained
between them and the cooktop below.
29
Safety clearances
Side / rear clearances to the cooktop
Ideally the cooktop should be installed
with plenty of space on either side.
There may be a wall at the rear and a
tall unit or wall at one side. On the other
side, however, no unit or divider should
stand higher than the cooktop (see
illustrations).
Before installing the appliance, check
that the below clearance requirements
are met.
Not allowed
a The horizontal distance from the
back edge of the cooktop to a
vertical surface shall be 50 mm
mimimum.
b The horizontal distance from the
right edge of the cooktop to a
vertical surface shall be 40 mm
mimimum.
Recommended
c The horizontal distance from the left
edge of the cooktop to a vertical
surface shall be 40 mm mimimum.
Not recommended
Not recommended
30
Safety clearances
Safety clearance underneath the
cooktop
To ensure sufficient ventilation to the
cooktop, a certain gap must be left
between the underside of the cooktop
and any oven, interim shelf or drawer.
The minimum gap between the
underside of the cooktop and
Interim shelf
It is not necessary to install an interim
shelf underneath the cooktop.
A gap of 10 mm is needed at the back
for laying the mains connection cable.
For better cooktop ventilation, however,
a gap of 20 mm is recommended.
– the top of an oven is 15 mm.
– the top of an interim shelf is 15 mm.
– the base of a drawer must be
75 mm.
31
Appliance and building-in dimensions
a Spring clamps
b Front
c Building-in depth
d Mains connection cable, L = 2,000 mm
32
Preparing the worktop
^ Make the worktop cut-out for one or
more appliances as applicable.
Remember to maintain a minimum
safety clearance from the back wall,
as well as from any tall unit or side
wall to the right or left of the
appliance.
See "Safety clearances".
^ Seal the cut surfaces with a suitable
heat-resistant sealant to avoid
swelling caused by moisture.
If, during installation, you find that the
seals on the corners of the frame are
not flush with the worktop surface,
the corner radius (ß R4) can be
carefully scribed to fit.
33
Installation of several appliances
When installing two or more appliances next to each other, a spacer bar b must
be used between each one.
See "Fitting the spacer bars and support brackets".
Worktop cut-out
- two appliances
Worktop cut-out
- three appliances
When installing two appliances, the
width of the cut-out required (D) is
calculated by adding dimensions (A)
and (C).
When installing three appliances, the
width of the cut-out required (D) is
calculated by adding dimensions (A),
(B) and (C).
A = appliance width (288 mm or 380 mm or 576 mm) less 8 mm
B = appliance width (288 mm or 380 mm or 576 mm)
C = appliance width (288 mm or 380 mm or 576 mm) less 8 mm
D = width of worktop cut-out
When installing more than three
appliances, for each additional
appliance, add the relevant
appliance width (288 mm or 380 mm
or 576 mm) to dimensions A, B and
C.
34
Installation of several appliances
Worktop cut-out calculation example for three appliances
A
Appliance width
less 8
B
Appliance
width
C
Appliance width
less 8
D
Worktop
cut-out
280
288
280
848
280
380
372
1032
280
576
568
1424
372
288
280
940
372
380
372
1124
372
576
568
1516
568
288
280
1136
568
380
372
1320
568
-
568
1136
All dimensions are given in mm
35
Installation of several appliances
a Spring clamps
b Spacer bars
c Gap between spacer bar and worktop
d Cover
The illustration shows a worktop cut-out with spring clamps a and spacer bars b
for 3 appliances.
An additional spacer bar is required for each additional appliance. The position
for securing each additional spacer bar will depend on the width of appliance B
(288 mm / 380 mm / 576 mm).
36
Fixing the spring clamps and spacer bars
Wooden worktops
^ Position the spring clamps supplied
a and spacer bars b on the top
edge of the cut-out in the positions
marked.
^ Secure the spring clamps and
spacer bars with the 3.5 x 25 mm
screws supplied.
37
Fixing the spring clamps and spacer bars
Granite and marble worktops
The screws are not required for
granite or marble worktops.
^ Coat the side edges and the lower
edges of the spring clamps a and
the spacer bars b with silicone.
^ Position and secure the spring
clamps a and spacer bars b using
strong, double-sided adhesive tape
c.
38
^ Then fill gap e between the spacer
bars and the worktop with silicone.
Installing/removing the appliance(s)
Installing the appliance
^ Feed the connection cable down
through the cut-out.
^ Place the appliance into the worktop
cut-out, starting with the front of the
appliance.
^ Using both hands, press down
evenly on the sides of the appliance
until it clicks into position. When
doing this, make sure that the seal
sits flush with the worktop on all
sides. This is important to ensure an
effective seal all round. Do not use
sealant.
When installing several appliances, a
cover must be inserted into the spacer
bar.
^ Slide the installed appliance to one
^ Place the appliance into the worktop
cut-out, starting with the front of the
appliance.
^ Connect the appliance to the mains
electricity (see "Electrical
connection").
^ Check that the appliance works.
Removing the appliance
If the appliance is accessible from
below, push it out from underneath,
starting at the back.
In stubborn cases, or if the appliance is
not accessible from below, use a
cooktop lever (available from Miele) to
lift up the cooktop. To prevent damage
to the worktop, position a cloth or
similar under the cooktop lever.
Warning: Do not use a screwdriver to lift
up the cooktop as this will damage the
appliance.
side until you can see the holes of the
spacer bar.
^ Insert the cover d into the holes of
the spacer bar b.
39
General installation tips
Seal between the appliance and the
worktop
Tiled worktop
The sealing strip under the edge of the
top part of the appliance provides a
sufficient seal for the worktop.
Grout lines a and the hatched area
underneath the appliance frame must
be smooth and even. If they are not, the
appliance will not sit flush with the
worktop and the sealing strip
underneath the appliance will not
provide a good seal between the
appliance and the worktop.
Do not use any additional sealant
(e.g. silicone) between the
appliance and the worktop.
This could cause difficulties if the
appliance ever needs to be taken
out for servicing and possibly result
in damage to the appliance or the
worktop.
40
Electrical connection
Important
All electrical work should be carried
out by a suitably qualified and
competent person in strict
accordance with national and local
safety regulations.
If the connection cable is damaged, it
must be replaced by a suitably
qualified electrician with a special
connection cable of type H 05 V V-F
(pvc insulated), available from Miele.
For extra safety, it is advisable to install
a residual current device (RCD), with a
trip current of 30 mA.
Connection for each appliance should
be made via a suitable isolator.
Note: Isolation of the appliance is
required when the appliance safety
device is activated. Ensure the isolating
switch is easily accessible and visible.
The data plate gives the necessary
data for connection.
WARNING
THIS APPLIANCE MUST BE
EARTHED
The wires in the mains lead are
coloured in accordance with the
following code:
Green/yellow = earth
Blue
= neutral
Brown
= live
As the colours of the wires in the mains
lead of this appliance may not
correspond with the coloured markings
identifying the terminals in your plug,
proceed as follows:
– The wire which is coloured green
and yellow must be connected to the
terminal in the plug which is marked
with the letter E or by the earth
symbol - or coloured green or
green and yellow.
– The wire which is coloured blue must
be connected to the terminal which
is marked with the letter N or
coloured black.
– The wire which is coloured brown
must be connected to the terminal
which is marked with the letter A or
coloured red.
41
After sales service, data plate, warranty
In the event of any faults which you cannot remedy yourself, please contact Miele.
The contact details for Miele are given at the back of these instructions.
When contacting Miele, please quote the model and serial number of your
appliance. These can be found on the data plate.
Space in which to stick the extra data plate supplied with the appliance. Ensure
that the model number is the same as the one on the back of these instructions.
Warranty
The warranty for this appliance is 2 years. For further information, please refer to
your warranty booklet.
42
43
CS 1223 I
en - AU, NZ
M.-Nr. 07 235 351 / 02