Baumatic P630SS User manual

BO670SS-AUS
60cm Multifunction
Built-in Oven with
Joystick Control
1
User Manual for your Baumatic
BO670SS-AUS
60cm Multifunction Pyrolytic
Built-in Oven with Joystick
Control
NOTE: This User Instruction Manual contains important
information, including safety & installation points, which will
enable you to get the most out of your appliance. Please keep it
in a safe place so that it is easily available for future reference; for
you or any person not familiar with the operation of the appliance.
GS 02/08/11
2
3
Contents
Environmental note
5
Important safety information
6–8
Specifications
Product and aperture dimensions
Product specifications
Standard accessories
Electrical details
Cooling fan
Control panel
The joystick control knob
9 - 13
9
9
9
10
10
11 - 12
12 - 13
Before first use
Setting the time of day
Oven burn-off
13 - 14
13
14
Selecting a cooking function and temperature
Switching the oven on
Switching the oven off
Selecting an oven function
Adjusting the oven temperature
Oven functions
PRH (Rapid pre-heating) function
Normal defrost function
Rapid defrost function
14
14
14
15
15
16
18
19
19
Timer functions
Setting the minute minder function
Setting the duration function
Setting the end cook function
Cancelling a countdown period
Adjusting the volume of the audible signal
The oven light
20
20
21
22
23
23
24
Recipe function
How to select a preset recipe
Recipe table
How to add a personal recipe to the preset recipes
Restoring the factory preset recipes
Cooking guidelines
Warnings
24
24
25
26
27
27
28
Cleaning and maintenance
Pyrolytic cleaning function
General cleaning information
Replacing the oven bulb
Removing the oven door for cleaning
Removing the inner door glass for cleaning
29
29
30
31
32
33
Installation
Electrical connection
Installing the oven into the kitchen cabinet
Positioning the appliance
Ventilation requirements
34 - 36
34 - 35
35
35
36
My appliance isn’t working correctly
Error codes
37 – 39
37
Contact details
40
- 19
- 15
- 16
- 18
- 19
- 24
- 22
- 23
– 24
-
29
25
26
27
- 28
- 29
– 34
– 30
- 31
- 34
4
Environmental note
o The packaging materials that Baumatic uses are environmentally
friendly and can be recycled.
o Please discard all packaging material with due regard for the
environment.
5
IMPORTANT SAFETY INFORMATION
Your safety is of the utmost importance to Baumatic.
Please make sure that you read this instruction booklet
before attempting to install or use the appliance. If you
are unsure of any of the information contained in this
booklet, please contact the Retailer where you
purchased your unit from.
General Information
o This appliance is designed for domestic household use and can
be built into a standard kitchen cabinet or housing unit.
o IMPORTANT: The adjacent furniture or housing and all
materials used in the installation must be able to withstand a
minimum temperature of 85°C above the ambient temperature
of the room it is located in, whilst in use.
o Certain types of vinyl or laminate kitchen furniture are
particularly prone to heat damage or discolouration at
temperatures below the guidelines given above.
o Any damage caused by the appliance being installed in
contravention of this temperature limit, or by placing adjacent
cabinet materials closer than 4mm to the appliance, will be the
liability of the owner.
o For use in leisure accommodation vehicles, please refer to
the appropriate information given in the installation instructions
for this appliance.
o The use of this appliance for any other purpose or in any other
environment without the express agreement of Baumatic Ltd.
will invalidate any warranty or liability claim.
o Your new appliance is guaranteed against electrical or
mechanical defects, subject to certain exclusions that are noted
in Baumatic’s Conditions Of Guarantee. The foregoing does not
affect your statutory rights.
o Repairs may only be carried out by Baumatic Service
Engineers or their authorised service agent.
6
Warning and safety instructions
o This appliance complies with all current European safety
legislation. Baumatic do wish to emphasise that this compliance
does not remove the fact that the appliance surfaces will
become hot during use and retain heat after operation.
Child Safety
o Baumatic strongly recommend that babies and young children
are prevented from being near to the appliance and not allowed
to touch the appliance at any time.
o If it is necessary for younger family members to be in the
kitchen, please ensure that they are kept under close supervision
at all times.
General Safety
o Do not place heavy objects on the oven door or lean on the
oven door when it is open, as this can cause damage to the oven
door hinges.
o Do not leave heated oil or fat unattended, as this is a fire risk.
o Do not place pans or baking trays directly on the base of the
oven cavity, or line it with aluminium foil.
o Do not allow electrical fittings or cables to come into contact
with areas on the appliance that get hot.
o Do not use the appliance to heat the room it is located in or to
dry clothing.
o Do not install the appliance next to curtains or soft furnishings.
o Do not attempt to lift or move cooking appliances by using the
oven door or handle, as this may cause damage to the appliance
or result in injury to the person lifting the appliance.
Cleaning
o Cleaning of the oven should be carried out on a regular basis.
o Great care should be taken whilst using this appliance and when
following the cleaning procedure.
7
o IMPORTANT: The appliance must be disconnected from the
mains before following the cleaning procedure.
Installation
This appliance must be correctly installed by a
suitably qualified person, strictly in accordance
with the manufacturer’s instructions.
o Baumatic Ltd. declines any responsibility for injury or
damage, to person or property, as a result of improper
use or installation of this appliance.
o Heat, steam and moisture will be created during use of the
appliance, take care to avoid injury and ensure that the room is
adequately ventilated. If the appliance is going to be used for
prolonged periods of time, then additional ventilation may be
required.
o Please consult with your qualified installer if you are in any doubt
about the amount of ventilation that you will require.
Declaration of conformity
This appliance complies with the following European Directives:
-
2006/95/EC regarding “low voltage”
2004/108/EC regarding “electromagnetic disturbances”
Regulation (EC) N° 1935/2004 regarding “materials in contact
with food”
o The above directives comply with 93/68/EEC regarding CE
marking.
o The manufacturer declares that the oven is built using certified
materials and requires the appliance to be installed in
accordance with the standards currently in force. This appliance
must be used by a trained person for domestic purposes only.
8
Specifications
Product Dimensions
Height:
Width:
Depth:
600.3 mm
598 mm
565.5 mm
Aperture dimensions
Height:
Width:
Depth:
583 - 585 mm
560 mm
560 mm
Product specifications
o
o
o
o
o
o
o
o
12 Oven functions
Energy efficiency class: A
Oven capacity (net): 61 litres
Oven capacity (gross): 68 litres
Joystick operation
Pyrolytic cleaning function
20 Preset recipes
16 Personal recipes
o
o
o
o
o
o
o
o
o
o
LED full programmer with temperature and function display
Electronically controllable thermostat
Thermostatically controlled grill
Cooling fan
Catalytic exhaust
Quadruple-glazed removable door
Removable door glass
Pyro enamel
Moulded side racks
Automatic safety door-lock when in pyrolytic mode
Standard accessories
o
o
o
o
2 x safety shelves
Trivet
Wipe clean enamelled baking tray with handle
Pizza stone
9
Electrical details
Rated Voltage:
220 - 240 Vac
Supply Connection:
20 A (double pole switched fused
outlet with 3mm contact gap)
Max Rated Inputs:
3.30 kW
Frequency:
50 – 60 Hz
Mains Supply Lead:
3 x 1.5 mm²
Oven Light Bulb:
25 W/500°C screw type pygmy
For future reference please record the following information which can
be found on the rating plate and the date of purchase which can be
found on your sales invoice. The rating plate for your oven can be
located by opening the oven door and looking on the right hand side of
the oven chassis.
Model Number
……………………………….
Serial Number
……………………………….
Date of Purchase
……………………………….
Cooling fan
o A tangential cooling fan is fitted inside of this appliance, to make
the internal temperature of the oven stable and the external
surface temperature lower.
o After you have finished cooking and switched off the oven, the
cooling fan will continue to run for a period of time afterwards.
The length of time will depend on how long the oven has been
switched on for and at how high a temperature.
10
Control Panel
Left hand display
1)
2)
3)
4)
5)
6)
Oven function display
Oven temperature display
Minute minder symbol
Duration symbol
End cook symbol
Timer display
11
Right hand display
7)
8)
9)
10)
11)
Recipe number
Flan recipes
Fish recipes
Bread/pizza recipes
Meat recipes
The joystick control knob
12)
13)
14)
15)
16)
ON/OFF segment
Recipe segment
Timer segment
Oven temperature segment
Cooking function segment
12
o The joystick control knob should be used to access the various
setting options that appear in the segments around it.
o You should press the oven selector control knob once to activate
it.
o As you turn the joystick control knob, the segments around the
outside of it will light.
o To confirm the menu that you want to access, you should press
the joystick control knob once when the relevant segment is lit.
Before first use
Setting the time of day
o After your appliance is connected to your mains supply for the
first time, all of the segments around the joystick control knob
will light up for approximately 3 seconds.
o The numbers on the timer display (6) will flash 00:00. The letter
“P” on the top indicates that your oven is a pyrolytic model.
Before you can select a cooking function or set a temperature,
you must set the appliance into manual operation mode and set
the time of day.
o Turn the joystick control knob clockwise and the numbers on the
timer display (6) will increase. Turn the joystick control knob
anti-clockwise and the numbers on the timer display (6) will
decrease.
o When the correct minute time shows on the timer display (6),
press the joystick control knob once.
o Turn the joystick control knob until the correct hour time shows
on the timer display (6). When it does, press the joystick control
knob again.
o If you have successfully set the time of day an audible “beep”
will be heard, then the correct time of day will appear on the
timer display (6). If you have not successfully set the time of
day, then “00:00” will reappear and you will need to follow the
above process again.
o To alter the set time, press and hold the joystick control knob
until the digits on the LED display blink. Then follow the steps
above to set a new time.
13
Oven burn-off
o To remove any residue from the oven that may have been left
from the manufacturing process, you should select either the fan
or conventional oven function and set the thermostat to its
maximum temperature setting.
o It is perfectly normal for a smell to be produced during this
process.
o You should make sure that any windows in the room are left
open during this process.
o It is advisable for you not to remain in the room whilst the
burning off process is taking place.
o You should leave the oven on maximum setting for 30 – 40
minutes.
o After the oven cavity has cooled, it should then be cleaned with
warm soapy water, using either a sponge or soft cloth. No
abrasive cleaners should be used.
o Outer parts of the oven should be cleaned with warm soapy
water, using either a sponge or soft cloth. No abrasive cleaners
should be used.
o We would recommend that an appropriate stainless steel cleaner
and polish is regularly used on the stainless steel surfaces of this
appliance.
Selecting a cooking function and temperature
Switching the oven on
o Press the oven selector control knob once, the ON/OFF segment
will light.
o The left hand display will switch on; showing the time of day and
the oven light symbol.
o If no option is selected within 5 minutes, the oven will
automatically switch off.
Switching the oven off
o The
icon must be lit. If not, turn the selector control knob
until this segment lights up.
14
o Press the oven selector control knob once. The word “OFF” will
appear on the LED display followed by an audible “beep”.
Selecting an oven function
o Once the oven is switched on, turn the joystick control knob until
the cooking function segment (MENU) is lit.
o Press the joystick control knob once to select the MENU
segment. The oven function display (1) will show the cooking
function that is currently selected.
o To select a different cooking function, turn the joystick control
knob until the cooking function symbol that you require appears
on the oven function display (1).
o The frame around the cooking function symbol will flash, to
confirm the cooking function, press the joystick control knob
again.
o If you do not confirm the cooking function within 10 seconds, the
oven will begin the cooking cycle automatically.
Adjusting the oven temperature
o Each cooking function has a preset temperature assigned to it.
However it is possible to adjust the oven temperature.
o Once you have confirmed the cooking function that you require,
turn the joystick control knob until the oven temperature
segment (TEMP) is lit.
o Press the joystick control knob once to select the TEMP segment.
o Turn the joystick control knob to increase or decrease the oven
temperature. The temperature will adjust in 5°C increments and
appear on the oven temperature display (2).
o You can adjust the temperature between 50 and 250°C.
o When the temperature that you require appears on the oven
temperature display (2), you should stop turning the joystick
control knob.
o Press the joystick control knob once to confirm the temperature.
If you do not turn the joystick control knob for more than 5
seconds, the temperature will confirm automatically.
15
o Whilst the oven is heating to the temperature that you have set,
the letter “C” and the “°” symbol will flash. When these symbols
remain fixed, the oven has reached temperature.
o You should not place food inside of the oven cavity until the
appliance has reached the temperature that you set.
o IMPORTANT: For the PRH (preheating) and ETC (cleaning)
functions, it is not possible to adjust the temperature.
Oven functions
Cooking
function name
and symbol
OVEN LIGHT
PRH PREHEATING
DEFROST
CONVENTIONAL
OVEN
Cooking
function
description
Separate light
control which
allows the light to
be switched on,
even when the
oven is not
heating.
This function uses
the grill, the lower
element and fan. It
is intended for preheating the oven
rapidly to a
temperature of
210°C.
The fan runs
without heat to
reduce the
defrosting time of
frozen foods. The
time required to
defrost the food
will depend on the
room temperature,
the quantity and
type of food.
Always check food
packaging for the
defrosting
instructions.
This method of
cooking provides
traditional cooking,
with heat from the
top and lower
elements. This
function is suitable
for roasting and
baking on one shelf
only.
Min. – max.
oven cavity
temperature
N/A
Default oven
cavity
temperature
N/A
N/A
210°C
N/A
N/A *
* Unless using
the rapid
defrost function.
50 - 250°C
190°C
16
BOTTOM
ELEMENT
This method of
cooking uses the
lower element to
direct heat
upwards to the
food. This function
is suitable for slowcooking recipes or
for warming up
meals.
50 - 250°C
80°C
FAN OVEN
This method of
cooking uses the
circular element
while the heat is
distributed by the
fan. This results in
a faster and more
economical cooking
process. The fan
oven allows food to
be cooked
simultaneously on
different shelves,
preventing the
transmission of
smells and tastes
from one dish onto
another.
50 – 250°C
165°C
CONVENTIONAL
OVEN + FAN
This method of
cooking provides
traditional cooking
with heat from the
top and the lower
element. The
running of the
circulation fan
ensures a fast and
even distribution of
the heat. Suitable
for light and
delicate baking,
such as pastries.
This method of
cooking uses the
bottom element
only while the fan
is circulating the
heat. For delicate
dishes and heating
pre-cooked food. It
is also suitable for
sterilising
preserving jars.
This method of
cooking uses the
lower and fan
50 - 250°C
200°C
50 - 250°C
165°C
50 - 250°C
165°C
BOTTOM
ELEMENT + FAN
PIZZA SETTING
17
CENTRE GRILL
GRILL WITH
FAN
SELF CLEANING
FUNCTION
element, whilst the
heat is distributed
by the fan. This
reproduces the
same conditions as
a traditional clay
wood-fire stove.
This cooking
method is normal
grilling, utilising the
inner part only of
the top element,
which directs heat
downwards onto
the food. Suitable
for grilling small
portions of bacon,
toast, meat etc.
This cooking
method uses the
top element in
conjunction with
the fan, to help
give a fast
circulation of heat.
Suitable where
quick browning is
required and
“sealing” the juices
in, such as with
steaks,
hamburgers, some
vegetables etc.
This function allows
easy cleaning of
the oven interior.
You are able to
select from three
cleaning cycle. See
the self cleaning
section of this
manual for further
information.
50 - 250°C
(open door)
200°C
50-200°C
(closed door)
50 - 250°C
(open door)
165°C
50-200°C
(closed door)
N/A
Cleaning time
1 H 30 MIN
PRH (Rapid pre-heating) function
o Once the oven is switched on, turn the joystick control knob until
the cooking function segment (MENU) is lit.
o Press the joystick control knob once to select the MENU
segment. The oven function display (1) will show the cooking
function that is currently selected.
o Turn the joystick control knob until the pre-heating
symbol appears on the oven function display (1).
18
o The appliance will switch on the grill element and lower element,
as well as running the fan. This combination will allow rapid preheating of the oven cavity to 210°C.
o When the oven has reached 210°C, the rapid pre-heating
function will switch off.
o At this point, you should place your food in the oven and select
an appropriate cooking function and temperature.
o IMPORTANT: Please note that it is not possible to adjust the
temperature that the oven is heating to during the rapid preheating function.
Normal defrost function
o Once the oven is switched on, turn the joystick control knob until
the cooking function segment (MENU) is lit.
o Press the joystick control knob once to select the MENU
segment. The oven function display (1) will show the cooking
function that is currently selected.
o Turn the joystick control knob until the defrost symbol
appears on the oven function display (1).
o Press the joystick control knob once to confirm the defrost
selection. The function will then begin.
Rapid defrost function
o Follow the steps outlined above for normal defrost set-up.
o Once you have confirmed the defrost function, turn the joystick
control knob until the oven temperature segment (TEMP) is lit.
o Press the joystick control knob once to select the TEMP segment.
o The oven display will show the defrost symbol with an
“F” next to it.
o Press the joystick control knob again to activate the rapid defrost
function.
19
Timer functions
Setting the minute minder function
This function allows you to set a countdown time. When this period of
time has elapsed, an audible alarm will sound. The countdown time
can be set, before or after a cooking function and temperature have
been selected.
o Once the oven is switched on, turn the joystick control knob until
the timer segment (TIMER) is lit.
o Press the joystick control knob once to select the TIMER segment
and the timer display of “00:00” will flash.
o Turn the joystick control knob clockwise and the numbers on the
timer display (6) will increase. Turn the joystick control knob
anti-clockwise and the numbers on the timer display (6) will
decrease.
o When the correct minute time for the countdown time shows on
the timer display (6), press the joystick control knob once.
o Turn the joystick control knob until the correct hour time for the
countdown time shows on the timer display (6). When it does,
press the joystick control knob again.
o The maximum countdown time that can be set is 23 hours and
59 minutes.
o Throughout the countdown period, the timer display (6) will
show the time of day.
o If you want to check how long the countdown time has to run,
turn the joystick control knob until the TIMER segment is lit.
Press the joystick control knob and the remaining time will
appear on the timer display (6).
o At the end of the countdown time, an audible signal will sound.
o Important: If you have set a cooking function and temperature,
then the oven will not switch off at the end of the countdown
time. If you have finished cooking, then you should switch off
the oven.
20
Setting the duration function
This function will allow you to set a countdown time similar to the
minute minder function. However the oven will no longer continue to
heat, once the countdown period has elapsed.
o Select a cooking function and oven temperature (as described in
previous sections of this manual).
o When the oven has started to heat, turn the joystick control
knob until the timer segment (TIMER) is lit.
o Press the joystick control knob once to select the TIMER segment
and the three timer symbols will flash.
o Turn the joystick control knob until the duration symbol ( ) is
the only timer symbol lit. Press the joystick control knob again
and the timer display (6) will show “00:00”.
o Turn the joystick control knob clockwise and the numbers on the
timer display (6) will increase. Turn the joystick control knob
anti-clockwise and the numbers on the timer display (6) will
decrease.
o When the correct minute time for the duration countdown time
shows on the timer display (6), press the joystick control knob
once.
o Turn the joystick control knob until the correct hour time for the
duration countdown time shows on the timer display (6). When
it does, press the joystick control knob again.
o The maximum duration countdown time that can be set is 10
hours.
o To exit the TIMER menu, turn the joystick control knob until the
word ESC is highlighted and then press the joystick control knob.
o Throughout the duration countdown period, the timer display (6)
will show the time of day.
o If you want to check how long the duration countdown time has
to run, turn the joystick control knob until the TIMER segment is
lit. Press the joystick control knob and the remaining time will
appear on the timer display (6).
o At the end of the countdown time, an audible signal will sound
and the oven will stop heating.
21
o To switch the oven off, turn the joystick control knob until the
symbol is lit.
o Press the joystick control knob once.
o The word “OFF” will appear on the left hand display and there
will be a brief audible signal.
Setting the end cook function
This function is similar to the duration function, however instead of
selecting a period of time that you wish the oven to switch off after.
You select the time of day that you wish the oven to switch off at.
o Select a cooking function and oven temperature.
o Set the duration countdown time.
o After confirming the duration countdown time, turn the joystick
control knob until the end cook symbol ( ) is lit. Press the
joystick control knob again and the timer display (6) will show
“00:00”.
o Turn the joystick control knob clockwise and the numbers on the
timer display (6) will increase. Turn the joystick control knob
anti-clockwise and the numbers on the timer display (6) will
decrease.
o When the correct minute time for the time of day that you wish
the oven to switch off at shows on the timer display (6), press
the joystick control knob once.
o Turn the joystick control knob until the correct hour time for the
time of day that you wish the oven to switch off at shows on the
timer display (6), press the joystick control knob once.
o To exit the TIMER menu, turn the joystick control knob until the
word ESC is highlighted and then press the joystick control knob.
o The oven will calculate what time it needs to switch on at, so
that your food will cook for the length of time that you selected.
It will automatically switch itself on, once it reaches the time of
day that it has calculated.
o Throughout the countdown period, the timer display (6) will
show the time of day.
o If you want to check how long the countdown time has to run,
turn the joystick control knob until the TIMER segment is lit.
22
Press the joystick control knob and the remaining time will
appear on the timer display (6).
o At the end of the countdown time, an audible signal will sound
and the oven will stop heating.
o To switch the oven off, turn the joystick control knob until the
symbol is lit.
o Press the joystick control knob once.
o The word “OFF” will appear on the left hand display and there
will be a brief audible signal.
Cancelling a countdown period
If a countdown period has been set and you wish to cancel it, you
should do the following:o Turn the joystick control knob until the timer segment (TIMER) is
lit.
o Press the joystick control knob once to select the TIMER
segment.
o Turn the joystick control knob until the symbol for the
countdown period that is currently in progress is lit.
o Press the joystick control knob once.
o The timer display (6) will show the time remaining for the
countdown period.
o Press the joystick control and keep this button depressed until
the countdown time is cancelled.
o There will be a brief audible signal.
o To exit the TIMER menu, turn the joystick control knob until the
word ESC is highlighted and then press the joystick control knob.
Adjusting the volume of the audible signal
The audible signal has three different volume levels; low, medium and
high. It is possible to adjust the volume of the audible signal by
following the process below:o Once the oven is switched on, turn the joystick control knob until
the timer segment (TIMER) is lit.
23
o Press and hold down the joystick control knob until the left hand
display shows the current volume of the audible signal. The
audible signal will also sound.
L1 = low
L2 = medium
L3 = high
o Turn the joystick control knob clockwise or anticlockwise to
adjust the volume of the audible signal.
o When the left hand display shows the desired volume level, stop
turning the joystick control knob and press it once to confirm the
volume level.
The oven light
o The oven light turns off automatically after two minutes from the
start of a cooking cycle.
o To turn the light on during a cooking cycle, turn the control
knob. The light will turn back on for another two minutes.
o During night hours the current time is displayed with a half
intensity light. If the oven is turned on. The display will return to
its maximum level.
Recipe functions
Your oven has preset recipes that you can select, where the optimum
oven function, temperature and time will be automatically selected.
You can also programme the oven to remember your own recipes, so
that you can recall them easily in the future.
How to select a preset recipe
o Once the oven is switched on, turn the joystick control knob
until the recipe segment (RECIPES) is lit.
o Press the joystick control knob once to select the RECIPES
segment.
o On the right hand display, all of the recipe symbols will flash.
Flans
24
Fish
Bread/pizza
Meat
o Turn the joystick control knob until the symbol for the food
group that you want to select a recipe for is lit.
o Press the joystick control knob once.
o Turn the joystick control knob until the recipe number that you
require appears next to the food group symbol. In the diagram
above, the fourth preset meat recipe (meat loaf) has been
selected.
o The left hand display will show the cooking function, temperature
and time automatically selected for the particular recipe number.
o To confirm the recipe that you have selected, press the joystick
control knob again.
o At the end of the recipe time, an audible signal will sound and
the oven will stop heating.
o To exit the RECIPES menu, turn the joystick control knob until
the word ESC is highlighted and then press the joystick control
knob.
Recipe table
Symbol
Recipe
no.
Recipe
name
Cooking
function
FLANS
1
2
Cannelloni
Lasagne
3
4
Quiche
Potato
casserole
Vegetable
casserole
5
Cooking
temperature
Cooking
time
(hrs:mins)
Fan oven
Conventional
oven + fan
Fan oven
Fan oven
180°C
160°C
0.45
0.50
180°C
180°C
0.50
1.00
Fan oven
180°C
0.50
25
FISH
BREAD/
PIZZA
MEAT
1
2
Sea Bream
Salmon
3
Tuna
4
5
Trout
Mullet
1
2
Savoury
focaccia
Bread
3
Pizza
4
5
1
Savoury
tart
Pizza roll
Roast pork
2
Roast veal
3
4
5
Roast
chicken
Meat loaf
Beef fillet
6
Spare ribs
Centre grill
Conventional
oven
Conventional
oven
Centre grill
Conventional
oven
Conventional
oven + fan
Bottom
element + fan
Conventional
oven + fan
Conventional
oven + fan
Fan oven
Conventional
oven + fan
Conventional
oven + fan
Conventional
oven + fan
Fan oven
Conventional
oven + fan
Double
ventilated grill
180°C
180°C
0.25
0.30
180°C
0.35
180°C
180°C
0.25
0.25
220°C
0.20
220°C
0.20
230°C
0.20
200°C
0.40
200°C
170°C
0.20
1.35
190°C
1.40
190°C
1.00
180°C
200°C
1.10
0.35
200°C
0.40
How to add a personal recipe to the preset recipes
IMPORTANT: Before you can get the oven to memorise a personal
recipe, YOU MUST select an oven function, temperature and cooking
time (duration function).
o Select the oven function that you wish to memorise.
o Select the oven temperature that you wish to memorise.
o Select the cooking time that you wish to memorise.
o Once the cooking process has started, turn the joystick control
knob until the recipe segment (RECIPES) is lit.
o Press the joystick control knob once to select the RECIPES
segment.
o On the right hand display, all of the recipe symbols will flash.
o Turn the joystick control knob until the symbol for the food
group that you want to save the personal recipe under is lit.
o Press the joystick control knob once.
26
o Turn the joystick control knob to select the recipe number where
you wish to memorise the personal recipe.
o If a number flashes, then this means that no existing recipe has
been saved in this position. If a number is fixed, then this means
that there is already a recipe saved in this position (preset or
personal); however it is possible to overwrite it.
o Press the joystick control knob once to save the personal recipe.
o Whilst the appliance is saving the personal recipe, the left hand
display will show the word “SAv”.
o When the recipe number stops flashing, it means that the
personal recipe has been saved.
o You can then recall a personal recipe, in the same manner as
any of the preset recipes.
o To exit the RECIPES menu, turn the joystick control knob until
the word ESC is highlighted and then press the joystick control
knob.
o IMPORTANT: If you do not select the cooking time, then the
oven will not be able to save the recipe. The oven will prompt
you to select the cooking time by activating the TIMER segment
symbol.
and highlighting the
Restoring the factory preset recipes
If you have overwritten any of the factory preset recipes, it is possible
to restore all of them by following the process below:o Switch off the oven and then switch it off at your mains supply.
o After a couple of minutes, switch your mains supply back on.
o Press and hold down the joystick control knob until the left hand
display shows the word “rES” and you hear two audible beeps.
Cooking guidelines
o Please refer to the information given on food packaging for
guidance on cooking temperatures and times. Once familiar with
the performance of your appliance, temperatures and times can
be varied to suit personal preference.
27
o If you are using the fan oven function, then you should follow
the information given on the food packaging for this particular
mode of cooking.
o You should pre-heat the oven and not place food inside of it until
the letter “C” and the “°” symbol remain fixed. You can choose
not to pre-heat when using the fan oven mode; however you
should extend the cooking time given on the food packaging by
at least ten minutes.
o IMPORTANT: You should pre-heat the oven if you are baking,
regardless of whether you are using the fan oven function.
o If there is no guidance given on the food packaging specifically
for cooking in fan oven mode, you can generally reduce the
cooking time and temperature by 10% from the information
given for conventional oven cooking.
o Make sure that frozen foods are thoroughly thawed before
cooking, unless the instructions on the food packaging advise
that you can “cook from frozen”.
o Before cooking, check that any accessories that are not required
are removed from the oven.
o Place cooking trays in the centre of the oven and leave gaps
between the trays to allow air to circulate.
o Try to open the door as little as possible to view the dishes.
Warnings
o Keep the oven door closed when using any of the cooking
functions, including the grill functions.
o Do not use aluminium foil to cover the enamelled baking tray or
heat items wrapped in aluminium foil under the grill. The high
reflectivity of the foil could potentially damage the grill element.
o You should also never line the base of your oven with aluminium
foil.
o During cooking, never place pans or cookware directly onto the
bottom of your oven. They should always be placed on the
shelves provided.
o The grill heating element and other internal components of the
oven become extremely hot during operation, avoid touching
28
them inadvertently when handling the food which you are
grilling.
o Important: Be careful when opening the door, to avoid contact
with hot parts of the oven and steam.
o Warning: Accessible parts may become hot during use. Young
children should be kept well away from the oven when it is in
use.
o The enamelled baking tray handle should only be used to
reposition the tray and NOT for removing it from the oven
cavity. When removing the enamelled baking tray, you should
ALWAYS use an oven glove.
o The enamelled baking tray handle should not be left in position
when the appliance is switched on.
Cleaning and maintenance
External cleaning operations must only be carried
out when the oven is cool and with the appliance
disconnected from your mains supply.
o The oven should be thoroughly cleaned before it is operated for
the first time. The pyrolytic cleaning process listed below should
be followed AT LEAST once a month or more frequently if there
have been food spillages inside of the cavity.
Pyrolytic cleaning function
o IMPORTANT: All accessories must be removed from inside
the oven before commencing the pyrolytic cleaning
function.
o The oven should not be left unattended when the pyrolytic
cleaning cycle is in progress.
o All major food residues must be removed from the oven
before starting this function.
o Switch the oven on and select the
that the oven door is shut.
cooking function. Ensure
o The oven automatically selects a temperature of 500°C and a
duration time of 90 minutes.
29
o You can select a different cleaning time by rotating the joystick
control knob to highlight the duration symbol (4) and pressing
the knob once. You can then set a cleaning time between 30
minutes to 3 hours depending on the level of cleaning that you
require. Press the joystick control knob to make a selection.
o If you turn the joystick control knob to the end cook symbol (5)
and press the knob once, you can set the end time for the
cleaning cycle. You can also set a minute minder for the cycle by
selecting the minute minder symbol (3).
o The oven door will automatically lock when the
temperature inside the oven reaches 300°C. Until
the door is closed the key icon will blink on the
LED display.
o A key symbol will appear next to the cooking
function symbol when the door locks.
o At the end of the pyrolytic cleaning cycle the oven will stop
heating.
o To switch the oven off, turn the joystick control knob until the
symbol is lit.
o Press the joystick control knob once.
o The word “OFF” will appear on the left hand display and there
will be a brief audible signal.
o After the set time period has elapsed, the oven door will remain
locked until the oven temperature has fallen below 300°C.
o When the oven has reached a warm temperature, you should
use a soft damp cloth to wipe out the resultant ash deposits. For
best cleaning results, you should not allow the oven to get
completely cold before wiping away the ash deposits.
General cleaning information
o Never clean any of the oven surfaces by steam cleaning.
o Outer parts of the oven should only be cleaned with warm soapy
water, using either a sponge or soft cloth. No abrasive cleaners
should be used.
30
o We would recommend that an appropriate stainless steel cleaner
and polish is regularly used on the stainless steel surfaces of this
appliance.
o If you use any form of oven cleaner on your appliance, then you
must check with the manufacturer of the cleaner that it is
suitable for use on your appliance.
o Any damage that is caused to the appliance by a cleaning
product will not be fixed by Baumatic free of charge, even
if the appliance is within the guarantee period.
Replacing the oven bulb
IMPORTANT: The oven must be disconnected from
your mains supply before you attempt to either
remove or replace the oven bulb.
o Remove all oven shelves and the drip
tray.
o Remove the light cover by turning it
anti-clockwise.
o Unscrew the bulb clockwise and remove
it from its holder.
o Replace the bulb with an E14 type 25 W/500°C, screw type
pygmy.
o Do not use any other type of bulb.
o Place the lamp cover back into position.
31
Removing the oven door for cleaning
To facilitate the cleaning of the inside of the oven and the outer frame
of the oven, the door can be removed as follows:o The hinges (A) have two movable bolts on them (B).
o If you raise both of the movable bolts (B), then the hinges (A)
are released from the oven housing.
o You should grip the sides of the door at the centre and then
incline it slightly towards the oven cavity and then by pull it
gently away from the oven cavity.
o WARNING- Care should be taken as the inner edges of the
door may be sharp.
o IMPORTANT: You should make sure that the door is supported
at all times and that you place the door on some padded
material whilst cleaning it.
o The oven door and door glass should only be cleaned using a
damp cloth and a small amount of detergent. The cloth MUST
NOT have come into contact with any form of cleaning product
or chemical previously.
o To refit the door you should slide the hinges back into their slots
and open the door fully.
o IMPORTANT: The movable bolts (B) must be closed back into
their original positions before closing the door.
o Take care not to dislodge the hinge
locking system when removing the door,
as the hinge mechanism has a strong
spring.
o Do not immerse the door in water at any
time.
32
Removing the inner door glass for cleaning
o Do not use any abrasive cleaner that could cause damage.
o Remember that if the surface of the glass panel becomes
scratched, this could lead to a dangerous failure.
o To facilitate cleaning, the inner door glass can be lifted out.
o To facilitate cleaning, the
door glass can be lifted
out.
o Open the door of the
oven to a 45° angle.
o There is a plastic sealing
section at the top of the
oven door, which has 4
small slots in it.
o Place a coin horizontally
into one of the small slots
and rotate the coin
clockwise. You will feel
part of the plastic sealing
section disengage from the
door.
33
o Repeat this process
for the other slots
and you will be able
to lift the plastic
sealing section
away from the top
of the door.
o This will allow you
to access the inner
door glasses.
o Carefully slide out
the middle door
glasses to remove
them from the oven
door.
IMPORTANT: Remember where each panel of glass is removed
from so you can reassemble the door correctly. Do not mix the
glasses up or rearrange the order.
INSTALLATION
The installation must be carried out by a suitably
qualified person, in accordance with the current
version of the following.
o AS/NZS 3000: 2007 Wiring Regulations
o 2010 Electricity Safety Regulations
Before connecting the appliance, make sure that the supply voltage
marked on the rating plate corresponds with your mains supply
voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
o This appliance should be wired into a 20 A double pole switched
fused spur outlet, having 3 mm contact separation and placed in
an easily accessible position adjacent to the appliance. The spur
outlet must still be accessible even when your oven is located in
its housing.
34
o To connect the oven power cord, loosen and remove the cover
on the terminal block, in order to gain access to the contacts
inside. Make the connection, securing the cord in place with the
cable clamp provided and then immediately close the terminal
block cover again.
o If you have to change the oven power cord, the earthing
(yellow/green) conductor must always be 10 mm longer than the
line conductors.
o Care must be taken to ensure that the temperature of the mains
supply cable does not exceed 50°C.
o If the mains supply cable is damaged, then it must be replaced
by an appropriate replacement which can be obtained from the
Spares Department.
Installing the oven into the kitchen cabinet
Positioning the appliance
o Ensure that the aperture that
you will be fitting the oven into
is of the size given in the
above diagram.
o The oven must be fitted into
an oven housing with the
ventilation cut-outs shown in
the “Ventilation requirements”
section on the next page.
o Ensure that the rear panel of
the furniture housing unit has
been removed.
35
Ventilation requirements
(Figure shows the ventilation and cut-out requirements for the
installation of the appliance into a standard kitchen unit).
(Figure shows the ventilation and cut-out requirements for the
installation of the appliance into a tall housing unit).
o Ensure that the oven has been
securely fixed into the housing unit.
The fixing of the oven into the
housing is made by using four
screws. These should be screwed
through the oven cabinet and into
the housing unit.
36
My appliance isn’t working correctly
Error codes
Error
code
ER:01
ER:17
ER:16
Cause
PT1000 cooking
chamber sensor
defective
PT1000 cooking
chamber sensor
defective
Excessive temperature
in the oven cavity.
ER:04
High temperature near
electronic cards
(power card)
ER:02
NTC sensor faulty on
the power card
Solution
Contact the Service Department,
quoting the error code that has
appeared on the display
Contact the Service Department,
quoting the error code that has
appeared on the display
a) Check whether the oven is
installed in the housing unit
correctly.
b) Check whether warm air is
venting out from underneath the
control panel
If it isn’t, then contact the Service
Department, quoting the error code
that has appeared on the display
a) Check whether the oven is
installed in the housing unit
correctly.
b) Check whether the cooling fan is
operating correctly.
If it isn’t, then contact the Service
Department, quoting the error code
that has appeared on the display
Contact the Service Department,
quoting the error code that has
appeared on the display
o The oven isn’t coming on.
* Check that the time of day has been set and that you have not
set an automatic cooking cycle.
* Check that you have selected a cooking function and a cooking
temperature.
o There appears to be no power to the oven and grill.
* Check that the appliance has been connected to the electrical
mains supply correctly.
* Check that the mains fuses are in working order.
37
* Check that the operating instructions for setting the time of day
and putting the appliance into manual operation mode have been
followed.
o The grill function works but the main oven does not.
* Check that you have selected the correct cooking function.
o The grill and top oven element is not working, or cuts out
for long periods of time during use.
* Allow the oven to cool for approximately 2 hours. Once cool,
check whether the appliance is again working properly.
o My food is not cooking properly.
* Ensure that you are selecting the correct temperature and the
correct cooking function for the food that you are cooking. It
may be appropriate to adjust your cooking temperature by plus
or minus 10°C, to achieve the best cooking results.
o My food is not cooking evenly.
* Check that the oven has been installed correctly and is level.
* Check that the correct temperatures and shelf positions are
being used.
o The oven light is not working.
* Follow the “Replacing the oven bulb” section.
o I am getting condensation in my oven.
* Steam and condensation is a natural by product of cooking any
food with high water content, such as frozen food, chicken etc.
* You may get condensation in the oven cavity and forming
between the oven door glasses. This is not necessarily a sign
that the oven is not working correctly.
* Do not leave food in the oven to cool after it has been cooked
and the oven has been switched off.
* Use a covered container, where practical, when cooking to
reduce the amount of condensation that forms.
38
IMPORTANT: If your appliance appears not to be
operating correctly, then you should disconnect it
from your mains supply and then contact the
Service Department on telephone number 1800
444 357.
DO NOT ATTEMPT TO REPAIR THE APPLIANCE
YOURSELF.
Please note that if an engineer is asked to attend whilst the product is
under guarantee and finds that the problem is not the result of an
appliance fault, then you may be liable for the cost of the call out
charge.
The appliance must be accessible for the engineer to perform
any necessary repair. If your appliance is installed in such a
way that an engineer is concerned that damage will be caused
to the appliance or your kitchen, then he will not complete a
repair.
This includes situations where appliances have been tiled in,
sealed in with sealant, have wooden obstructions placed in
front of the appliance, like plinths. Or any installation other
than the one specified by Baumatic Ltd. has been completed.
Please refer to the conditions of guarantee that appear on the
warranty card that you receive with the appliance.
IMPORTANT: Baumatic Ltd. operates a policy of continuous
improvement and reserves the right to adjust and modify its
products
without
prior
notification.
39
Think Appliances Pty Ltd.
416-424 Barry Rd
Coolaroo VIC 3048
Sales Telephone
1300 132 824
Service Telephone
1800 444 357
Website
www.thinkappliances.com
Applico Ltd.
P.O. 92900
Onehunga, Auckland,
New Zealand 1061
Website
www.applico.nz
United Kingdom
Baumatic Ltd.,
Baumatic Buildings,
6 Bennet Road,
Reading, Berkshire
RG2 0QX
United Kingdom
Sales Telephone
(0118) 933 6900
Website:
www.baumatic.co.uk
40
41
42
43
44