Canon EOS 5D - Focusing Screen Ee-A Instruction manual

INSTRUCTION MANUAL
E
C
Y
P
O
E
INSTRUCTION
MANUAL
Thank you for purchasing a Canon product.
The EOS 5D Mark II is a high-performance, digital SLR camera with a
full-frame (approx. 36mm x 24mm) CMOS sensor with 21.10 effective
megapixels. Other features include DIGIC 4, high-precision and highspeed, 9-point AF (plus six Assist AF points); approx. 3.9 fps
continuous shooting; Live View shooting; and Full HD (Full HighDefinition) movie shooting.
The camera is highly responsive to any shooting situation at anytime,
provides many features for demanding shoots, and expands shooting
possibilities with system accessories.
Take a Few Test Shots to Familiarize Yourself with the
Camera
Y
P
O
With a digital camera, you can immediately view the image you have
captured. While reading this manual, take a few test shots and see how
they come out. You can then better understand the camera.
To avoid botched pictures and accidents, read the Safety Warnings
(p.219,220) and Handling Precautions (p.12,13).
Testing the Camera Before Using and Liability
C
After shooting, playback and check whether the image has been
properly recorded. If the camera or memory card is faulty and the
images cannot be recorded or downloaded to a personal computer,
Canon cannot be held liable for any loss or inconvenience caused.
Copyrights
Copyright laws in your country may prohibit the use of your recorded
images of people and certain subjects for anything but private
enjoyment. Also be aware that certain public performances, exhibitions,
etc., may prohibit photography even for private enjoyment.
CF Card
In this manual, “card” refers to the CF card. The CF card (for
recording images) is not included. Please purchase it separately.
2
Item Check List
Before starting, check that all the following items have been included
with your camera. If anything is missing, contact your dealer.
Battery Pack LP-E6
(with protective cover)
Camera
(with eyecup and
body cap)
Wide Strap
EW-EOS5DMKII
Y
P
O
Interface Cable
IFC-200U
C
EOS DIGITAL
Solution Disk
(Software)
Battery Charger
LC-E6/LC-E6E*
Stereo Video Cable
STV-250N
Software Instruction
Manual
(1) Instruction Manual (this booklet)
(2) Pocket Guide
Quick start guide to shooting.
(3) CD-ROM Guide
Guide to the bundled software (EOS DIGITAL
Solution Disk) and Software Instruction Manuals.
* Battery Charger LC-E6 or LC-E6E is provided. (The LC-E6E comes with a
power cord.)
If you purchased a Lens Kit, check that the lens is included.
Depending on the Lens Kit type, the lens instruction manual might also be
included.
Be careful not to lose any of the above items.
3
Conventions Used in this Manual
Icons in this Manual
<6>
<5>
<9>
<0>
0, 9,
: Indicates the Main Dial.
: Indicates the Quick Control Dial.
: Indicates the Multi-controller.
: Indicates the setting button.
, 8: Indicates that the respective function remains
active for 4 sec., 6 sec., 10 sec., or 16 sec.
respectively after you let go of the button.
* In this manual, the icons and markings indicating the camera’s buttons, dials,
and settings correspond to the icons and markings on the camera and on the
LCD monitor.
Y
P
O
3 : Indicates a function which can be changed by pressing the
<M> button and changing the setting.
M
: When shown on the right of the page, it indicates that the
function is available only when the Mode Dial is set to d, s,
f, a, or F.
* Function which cannot be used in the fully-automatic modes (1/C).
C
(p.**) : Reference page numbers for more information.
: Tip or advice for better shooting.
: Problem-solving advice.
: Warning to prevent shooting problems.
: Supplemental information.
Basic Assumptions
All operations explained in this manual assume that the power switch
is already set to <1> or <J> (p.27).
<5> operations explained in this manual assume that the power
switch is already set to <J>.
It is assumed that all the menu settings and Custom Functions are
set to the default.
For explanatory purposes, the instructions show the camera attached
with an EF50mm f/1.4 USM lens (or EF24-105mm f/4L IS USM).
4
Chapters
For first-time DSLR users, chapters 1 and 2 explain the camera’s
basic operations and shooting procedures.
Introduction
2
Camera basics.
1
2
3
4
5
6
7
8
9
10
11
Getting Started
Basic Shooting
23
Y
P
O
Fully automatic shooting.
Image Settings
Setting the AF and Drive Modes
Advanced Operations
C
Shooting features for specific types of subjects.
Live View Shooting and Movies
Shoot while viewing the LCD monitor.
47
53
77
87
107
Image Playback
127
Sensor Cleaning
147
Printing Images and Transferring Images to a Computer
153
Customizing the Camera
171
Reference
189
5
Contents
Introduction
Item Check List.................................................................................................. 3
Conventions Used in this Manual ...................................................................... 4
Chapters ............................................................................................................ 5
Index to Features ............................................................................................ 10
Handling Precautions ...................................................................................... 12
Quick Start Guide ............................................................................................ 14
Nomenclature .................................................................................................. 16
1
Getting Started
Y
P
O
23
Charging the Battery ....................................................................................... 24
Installing and Removing the Battery................................................................ 26
Turning on the Power ...................................................................................... 27
Installing and Removing the CF Card.............................................................. 29
Attaching and Detaching a Lens ..................................................................... 31
About the Lens Image Stabilizer...................................................................... 33
Basic Operation ............................................................................................... 34
9 Using the Quick Control Screen ................................................................ 38
3 Menu Operations ................................................................................... 40
Before You Start .............................................................................................. 42
Setting the Interface Language .................................................................... 42
Setting the Date and Time............................................................................ 42
Formatting the Card ..................................................................................... 43
Set the Power-off Time/Auto Power Off ....................................................... 44
Reverting the Camera to the Default Settings.............................................. 45
About Copyright Information......................................................................... 46
C
2
Basic Shooting
47
1 Fully Automatic Shooting .......................................................................... 48
1 Full Auto Techniques ................................................................................ 50
C Creative Auto Shooting ............................................................................. 51
6
Contents
3
Image Settings
53
Setting the Image-recording Quality.................................................................54
i: Setting the ISO Speed..............................................................................57
A Selecting a Picture Style ..........................................................................59
A Customizing a Picture Style .....................................................................61
A Registering a Picture Style.......................................................................63
B: Setting the White Balance .......................................................................65
O Custom White Balance .........................................................................66
P Setting the Color Temperature ...............................................................67
u White Balance Correction ...........................................................................68
Lens Peripheral Illumination Correction ...........................................................70
Creating and Selecting a Folder.......................................................................72
File Numbering Methods ..................................................................................74
Setting the Color Space ...................................................................................76
4
Y
P
O
Setting the AF and Drive Modes
77
f: Selecting the AF Mode..............................................................................78
S Selecting the AF Point ...............................................................................81
When Autofocus Fails ......................................................................................84
MF: Manual Focusing ...................................................................................84
i Selecting the Drive Mode ...........................................................................85
j Self-timer Operation ....................................................................................86
5
C
Advanced Operations
87
d: Program AE ................................................................................................88
s: Shutter-Priority AE ...................................................................................90
f: Aperture-Priority AE .................................................................................92
Depth of Field Preview ..................................................................................93
a: Manual Exposure.......................................................................................94
q Selecting the Metering Mode .....................................................................95
Setting Exposure Compensation......................................................................96
h Auto Exposure Bracketing (AEB) ..............................................................97
A AE Lock ......................................................................................................98
F: Bulb Exposures ..........................................................................................99
Mirror Lockup .................................................................................................101
7
Contents
R Remote Control Shooting ........................................................................... 102
D Flash Photography .................................................................................... 103
Setting the Flash ........................................................................................... 105
6
Live View Shooting and Movies
107
A Preparing for Live View Shooting............................................................ 108
Shooting ........................................................................................................ 110
Using AF to Focus ......................................................................................... 113
Focusing Manually......................................................................................... 119
Silent Shooting .............................................................................................. 120
k Shooting Movies...................................................................................... 121
7
Image Playback
Y
P
O
127
x Image Playback....................................................................................... 128
B Shooting Information Display ............................................................. 129
H I Searching for Images Quickly ........................................................... 131
u/y Magnified View................................................................................... 133
b Rotating the Image ................................................................................... 134
Auto Playback (Slide Show) .......................................................................... 135
k Playing Movies ........................................................................................ 137
Viewing the Images on TV............................................................................. 139
K Protecting Images.................................................................................... 141
L Erasing Images......................................................................................... 142
Changing Image Playback Settings............................................................... 144
Adjusting the LCD Monitor Brightness ....................................................... 144
Setting the Image Review Time ................................................................. 145
Auto Rotate of Vertical Images................................................................... 146
C
8
Sensor Cleaning
147
f Automatic Sensor Cleaning ................................................................... 148
Appending Dust Delete Data ......................................................................... 149
Manual Sensor Cleaning ............................................................................... 151
8
Contents
9
Printing Images and Transferring Images to a Computer
153
Preparing to Print ...........................................................................................154
wPrinting......................................................................................................156
Trimming the Image ....................................................................................161
W Digital Print Order Format (DPOF) ...........................................................163
Direct Printing with DPOF ..............................................................................166
d Transferring Images to a Personal Computer..........................................167
10
Customizing the Camera
171
Setting Custom Functions ..............................................................................172
Custom Functions ..........................................................................................173
Custom Function Settings ..............................................................................174
C.Fn I : Exposure ......................................................................................174
C.Fn II : Image............................................................................................176
C.Fn III : Autofocus/Drive ............................................................................178
C.Fn IV: Operation/Others ..........................................................................182
Registering My Menu .....................................................................................186
w Register Camera User Settings................................................................187
11
C
Reference
Y
P
O
189
B Checking Camera Settings ....................................................................190
Checking the Battery Information...................................................................192
Using a Household Power Outlet ...................................................................196
Replacing the Date/Time Battery ...................................................................197
Function Availability Table .............................................................................198
Menu Settings ................................................................................................200
Troubleshooting Guide...................................................................................203
Error Codes....................................................................................................209
System Map ...................................................................................................210
Specifications .................................................................................................212
Index ..............................................................................................................223
9
Index to Features
Power
Battery
• Charging
• Battery check
• Battery information check
Power outlet
Î p.24
Î p.28
Î p.192
Î p.196
Auto power off
Î p.44
Lens
Image improvement features
• Auto Lighting Optimizer Î p.177
• Lens peripheral illumination
correction
Î p.70
• Noise reduction
for long exposures
Î p.176
• Noise reduction
for high ISO speeds
Î p.176
• Highlight tone priority
Î p.177
White balance
Attaching/Detaching
Î p.31
Zoom
Î p.32
White balance setting
Î p.65
Î p.33
Custom WB
Î p.66
Image Stabilizer
Y
P
O
Color temperature setting Î p.67
Basic Settings
(Menu Functions)
White balance correction Î p.68
WB bracketing
Language
Î p.42
Date/Time
Î p.42
LCD brightness
adjustment
Beeper
Shoot w/o card
C
Recording Images
Format
Î p.144
Î p.200
Î p.29
Î p.43
Create/select a folder
Î p.72
File No.
Î p.74
Image Quality
Image-recording quality Î p.54
ISO speed
Î p.57
Picture Style
Î p.59
Color space
Î p.76
10
Î p.69
AF
AF mode
Î p.78
AF point selection
• Assist AF points
• AF point expansion
Manual focusing
Î p.81
Î p.80
Î p.180
Î p.84
Metering
Metering mode
Î p.95
Drive
Drive modes
Î p.85
Maximum burst
Î p.56
Index to Features
Shooting
Movies
Creative Auto
Î p.51
Program AE
Î p.88
Shutter-priority AE
Î p.90
Aperture-priority AE
Î p.92
Manual exposure
Î p.94
Bulb
Î p.121
Image playback
Image review time
Î p.145
Î p.128
Î p.99
Single image display
• Shooting information
display
Movie playback
Î p.129
Î p.137
Mirror lockup
Î p.101
Index display
Î p.131
Quick Control screen
Î p.38
Self-timer
Î p.86
Image browsing
(Jump display)
Î p.132
Remote control
Î p.102
Magnified view
Î p.133
Manual image rotate
Î p.134
Auto image rotate
Î p.146
Exposure compensation Î p.96
Auto playback
Î p.135
AEB
Î p.97
AE lock
Î p.98
Viewing the images
on TV
Î p.139
Protect
Î p.141
Erase
Î p.142
Exposure adjustment
Exposure level
increments
Flash
External flash
Flash control
C
Y
P
O
Î p.174
Custom Function (C.Fn) Î p.171
Î p.105
My Menu
Î p.186
Camera user setting
registration
Î p.187
Flash Custom Functions Î p.106
Live View shooting
Stills
• AF
- Quick mode
- Live mode
- Live face
detection mode
• Manual focusing
• Exposure simulation
• Grid
• Silent shooting
Customization
Î p.103
Î p.108
Sensor cleaning/
Dust reduction
Î p.113
Î p.115
Sensor cleaning
Î p.147
Add Dust Delete Data
Î p.149
Î p.116
Î p.119
Î p.109
Î p.111
Î p.120
Viewfinder
Dioptric adjustment
Î p.34
Changing the focusing
screen
Î p.184
11
Handling Precautions
Camera Care
This camera is a precision instrument. Do not drop it or subject it to physical
shock.
The camera is not waterproof and cannot be used underwater. If you
accidentally drop the camera into water, promptly consult your nearest
Canon Service Center. Wipe off any water droplets with a dry cloth. If the
camera has been exposed to salty air, wipe it with a well-wrung wet cloth.
Never leave the camera near anything having a strong magnetic field such
as a magnet or electric motor. Also avoid using or leaving the camera near
anything emitting strong radio waves such as a large antenna. Strong
magnetic fields can cause camera misoperation or destroy image data.
Do not leave the camera in excessive heat such as in a car in direct sunlight.
High temperatures can cause the camera to malfunction.
The camera contains precision electronic circuitry. Never attempt to
disassemble the camera yourself.
Use a blower to blow away dust on the lens, viewfinder, reflex mirror, and
focusing screen. Do not use cleaners that contain organic solvents to clean
the camera body or lens. For stubborn dirt, take the camera to the nearest
Canon Service Center.
Do not touch the camera’s electrical contacts with your fingers. This is to
prevent the contacts from corroding. Corroded contacts can cause camera
misoperation.
If the camera is suddenly brought in from the cold into a warm room,
condensation may form on the camera and internal parts. To prevent
condensation, first put the camera in a sealed plastic bag and let it adjust to
the warmer temperature before taking it out of the bag.
If condensation forms on the camera, do not use the camera. This is to avoid
damaging the camera. If there is condensation, remove the lens, card and
battery from the camera, and wait until the condensation has evaporated
before using the camera.
If the camera will not be used for an extended period, remove the battery
and store the camera in a cool, dry, well-ventilated location. Even while the
camera is in storage, press the shutter button a few times once in a while to
check that the camera is still working.
Avoid storing the camera where there are corrosive chemicals such as a
darkroom or chemical lab.
If the camera has not been used for an extended period, test all its functions
before using it. If you have not used the camera for some time or if there is
an important shoot coming up, have the camera checked by your Canon
dealer or check the camera yourself and make sure it is working properly.
C
12
Y
P
O
Handling Precautions
LCD Panel and LCD Monitor
Although the LCD monitor is manufactured with very high precision
technology with over 99.99% effective pixels, there might be a few dead
pixels among the remaining 0.01% or less pixels. Dead pixels displaying
only black or red, etc., are not a malfunction. They do not affect the images
recorded.
If the LCD monitor is left on for a prolonged period, screen burn-in may occur
where you see remnants of what was displayed. However, this is only
temporary and will disappear when the camera is left unused for a few days.
In low or high temperatures, the LCD monitor display may seem slow or it
might look black. It will return to normal at room temperature.
Cards
Y
P
O
To protect the card and its recorded data, note the following:
Do not drop, bend, or wet the card. Do not subject it to excessive force,
physical shock, and vibration.
Do not store or use the card near anything having a strong magnetic field
such as a TV set, speakers, or magnet. Also avoid places prone to having
static electricity.
Do not leave the card in direct sunlight or near a heat source.
Store the card in a case.
Do not store the card in hot, dusty, or humid locations.
Lens
C
After detaching the lens from the camera, attach the lens
caps or put down the lens with the rear end up to avoid
scratching the lens surface and electrical contacts.
Contacts
Cautions During Prolonged Use
When you shoot continuously for a prolonged period or use Live View shooting
for a long period, the camera may become hot. Although this is not a
malfunction, holding the hot camera for a long period can cause slight skin
burns.
13
Quick Start Guide
1
Insert the battery. (p.26)
2
Attach the lens. (p.31)
To charge the battery, see page 24.
Align the red dot.
4
5
14
Y
P
O
Set the lens focus mode switch
to <AF>. (p.31)
3
C
Open the slot cover and
insert a card. (p.29)
Face the label side toward you
and insert the end with the
small holes into the camera.
Set the power switch to <1>.
(p.27)
Quick Start Guide
Set the Mode Dial to <1> (Full
Auto). (p.48)
6
All the necessary camera settings will
be set automatically.
Focus the subject. (p.35)
7
Look through the viewfinder and aim
the viewfinder center over the subject.
Press the shutter button halfway, and
the camera will focus the subject.
9
Y
P
O
Take the picture. (p.35)
Press the shutter button completely to
take the picture.
8
C
Review the picture. (p.145)
The captured image will be displayed
for about 2 sec. on the LCD monitor.
To display the image again, press the
<x> button (p.128).
To view the images captured so far, see “Image Playback” (p.128).
To delete an image, see “Erasing Images” (p.142).
15
Nomenclature
For detailed information, reference page numbers are provided in
parentheses (p.**).
<o> AF mode
selection/Drive mode
selection button (p.78/85)
<n> Metering mode selection/
White balance selection button (p.95/65)
LCD panel (p.18)
<m> ISO speed
setting/Flash exposure
compensation button
(p.57/103)
EF lens mount index (p.31)
Flash-sync contacts (p.103)
<U> LCD panel
illumination button
(p.99)
Hot shoe (p.103)
<V> Focal plane mark
<6> Main Dial
(p.36)
Y
P
O
Mode Dial (p.20)
Shutter button
(p.35)
Strap mount
(p.23)
Remote control
sensor (p.102)
Self-timer lamp
(p.86)
Grip (Battery
compartment)
DC coupler cord
hole (p.196)
C
Mirror (p.101,151)
Contacts (p.13)
Lens mount
Terminal cover
Microphone
(p.124)
Date/time battery
(p.197)
Depth-of-field preview
button (p.93)
Lens release button (p.32)
Lens lock pin
Audio/video OUT terminal (p.139)
PC terminal (p.104)
Digital terminal (p.154,167)
Remote control terminal (N3 type) (p.100)
HDMI mini OUT terminal (p.140)
Body cap (p.31)
16
External microphone IN terminal (p.125)
Nomenclature
<9> Multi-controller (p.36)
Dioptric adjustment knob (p.34)
Speaker (p.138)
Eyecup (p.100)
<p> AF start button
(p.35,79,110)
<A/I> AE lock/
FE lock button/Index/
Reduce button
(p.98/103/131/133,161)
Viewfinder eyepiece
<S/u>
AF point selection/
Magnify button
(p.81/133,161)
<A/l> Live View
shooting/Print/Share button
(p.109/159,168)
<M> Menu button
(p.40)
<A> Picture Style
selection button (p.59)
<B> Info/
Trimming orientation
button
(p.112,128,190/161)
<x> Playback
button (p.128)
<L> Erase button
(p.142)
Y
P
O
Strap mount
(p.23)
Card slot
cover (p.29)
C
Extension system terminal
LCD monitor (p.40, 144)
Light sensor (p.144)
Tripod socket
Battery
compartment
cover release
lever (p.26)
Battery compartment
cover (p.26)
Access lamp (p.30)
<5> Quick Control Dial (p.37)
Power/Quick Control Dial
switch (p.27)
<0> Setting/Movie shooting button (p.40/122)
Card slot (p.29)
Card ejection button (p.30)
17
Nomenclature
LCD Panel
AF point selection ([ - -- --- -- - ])
Card full warning (FuLL CF)
Shutter speed
Busy (buSY)
Card error warning (Err CF)
No card warning (no CF)
Error code (Err)
Image-recording quality (p.54)
37
38
47
48
67
68
1
D
Large/Fine
Large/Normal
Medium/Fine
Medium/Normal
Small/Fine
Small/Normal
RAW
Small RAW
White balance (p.65)
Q Auto
W Daylight
E Shade
R Cloudy
Y Tungsten light
U White
fluorescent light
I Flash
O Custom
P Color
temperature
Battery check (p.28)
Cleaning image sensor (CLn)
Aperture
Shots remaining
Shots remaining
during WB bracketing
Self-timer countdown
Y
P
O
Bulb exposure time
White balance
correction (p.68)
C
AF mode (p.78)
X
One-Shot AF
9
AI Focus AF
Z
AI Servo AF
Drive mode (p.85)
u Single shooting
i Continuous shooting
10-sec. self-timer/
Remote control
k 2-sec. self-timer/
Remote control
Exposure level indicator
Exposure compensation
amount (p.96)
AEB range (p.97)
Flash exposure compensation
amount (p.103)
Card writing status
Metering mode (p.95)
q Evaluative metering
w Partial metering
r Spot metering
e Center-weighted average metering
<h> AEB (p.97)
Flash exposure
compensation (p.103)
ISO speed (p.57)
<0> Monochrome shooting (p.60)
<g> ISO speed (p.57)
<A> Highlight tone priority (p.177)
The display will show only the settings currently applied.
18
Nomenclature
Viewfinder Information
Spot metering circle
Focusing screen
AF points
(Superimposed display)
Y
P
O
<g>
ISO speed
White balance
correction
< > Battery check
C
<A> AE lock/
AEB in-progress
<D> Flash-ready
Improper FE lock
warning
<e> High-speed sync
(FP flash)
<d> FE lock/
FEB in-progress
<y> Flash exposure
compensation
Shutter speed
FE lock (FEL)
Busy (buSY)
<o> Focus
confirmation
light
Max. burst
<0> Monochrome
shooting
ISO speed
<A> Highlight tone priority
Exposure level indicator
Exposure compensation amount
Flash exposure compensation
amount
AEB range
Card full warning (FuLL CF)
Card error warning (Err CF)
No card warning (no CF)
Aperture
The display will show only the settings currently applied.
19
Nomenclature
Mode Dial
Camera User Settings
Most camera settings can be registered under w,
x, or y (p.187).
F : Bulb (p.99)
a : Manual exposure (p.94)
Y
P
O
f: Aperture-priority AE (p.92)
s : Shutter-priority AE (p.90)
d : Program AE (p.88)
Fully-Automatic Modes
C
All you do is press the shutter button.
Fully-automatic shooting suitable for the
subject.
1: Full Auto (p.48)
C: Creative Auto (p.51)
20
Nomenclature
EF24-105mm f/4L IS USM lens
Focus mode switch (p.31)
Distance scale
Infrared index
Hood mount
(p.32)
Zoom ring (p.32)
Zoom position index
(p.32)
77 mm filter thread
(front of lens)
Focusing ring (p.84,119)
Image Stabilizer switch (p.33)
C
Y
P
O
Contacts (p.13)
Lens mount index (p.31)
Use of genuine Canon accessories is recommended
This product is designed to achieve excellent performance when used with
genuine Canon accessories. Canon shall not be liable for any damage to this
product and/or accidents such as fire, etc., caused by the malfunction of nongenuine Canon accessories (e.g., a leakage and/or explosion of a battery
pack). Please note that this warranty does not apply to repairs arising out of the
malfunction of non-genuine Canon accessories, although you may request
such repairs on a chargeable basis.
21
Nomenclature
Battery Charger LC-E6
Charger for Battery Pack LP-E6 (p.24).
Power plug
Battery pack slot
Charge lamp
Y
P
O
This power unit is intended to be correctly orientated in a vertical or
floor mount position.
IMPORTANT SAFETY INSTRUCTIONS-SAVE THESE INSTRUCTIONS.
DANGER-TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
For connection to a supply not in the U.S.A., use an attachment plug adapter
of the proper configuration for the power outlet.
C
Battery Charger LC-E6E
Charger for Battery Pack LP-E6 (p.24).
Power cord
Charge lamp
Battery pack slot
Power cord socket
22
1
Getting Started
Y
P
O
This chapter explains preparatory steps and basic
camera operations.
Attaching the Strap
Pass the end of the strap through
the camera’s strap mount eyelet
from the bottom. Then pass it
through the strap’s buckle as shown
in the illustration. Pull the strap to
take up any slack and make sure
the strap will not loosen from the
buckle.
The eyepiece cover is also
attached to the strap (p.100).
C
Eyepiece cover
23
Charging the Battery
1
Remove the protective cover.
the battery.
2 Attach
As shown in the illustration, attach the
battery securely.
To detach the battery, follow the
above procedure in reverse.
LC-E6
Y
P
O
the battery.
3 Recharge
For LC-E6
As shown by the arrow, flip out the
battery charger’s prongs and insert
the prongs into a power outlet.
For LC-E6E
LC-E6E
Charge Level
0 - 50%
50 - 75%
75% or higher
Fully charged
C
Color
Orange
Green
Connect the power cord to the
charger and insert the plug into the
power outlet.
X Recharging starts automatically and
the charge lamp blinks in orange.
Charge Lamp
Indicator
Blinks once per second
Blinks twice per second
Blinks three times per second
Lights on
It takes about 2.5 hours to fully recharge a completely exhausted
battery at 23°C / 73°F. The time required to recharge the battery
depends on the ambient temperature and battery’s charge level.
For safety reasons, recharging in low temperatures (5°C - 10°C /
41°F - 50°F) will take a longer time (up to 4 hours).
24
Charging the Battery
Tips for Using the Battery and Charger
Recharge the battery on the day before or on the day it is to be used.
Even during non-use or storage, a charged battery will gradually
discharge and lose its power.
After recharging the battery, detach it and unplug the power
cord or prongs from the power outlet.
You can attach the cover in a different
orientation to indicate whether the battery
has been recharged or not.
If the battery has been recharged, attach the
cover so that the battery-shaped hole <
> is
aligned over the blue sticker on the battery. If the battery is
exhausted, attach the cover in the opposite orientation.
Y
P
O
When not using the camera, remove the battery.
If the battery is left in the camera for a prolonged period, a small amount
of power current is released, resulting in excess discharge and shorter
battery life. Store the battery with the protective cover attached. Storing
the battery after it is fully charged can lower the battery’s performance.
C
The battery charger can also be used in foreign countries.
The battery charger is compatible with a 100 V AC to 240 V AC 50/
60 Hz power source. If necessary, attach a commercially-available
plug adapter for the respective country or region. Do not attach any
portable voltage transformer to the battery charger. Doing so can
damage the battery charger.
If the battery becomes exhausted quickly even after being fully
charged, the battery has worn out.
Purchase a new battery.
The charger cannot charge any battery other than Battery Pack LP-E6.
Battery Pack LP-E6 is dedicated to Canon products only. Using it with an
incompatible battery charger or product may result in malfunction or
accidents for which Canon cannot be held liable.
25
Installing and Removing the Battery
Installing the Battery
Load a fully charged Battery Pack LP-E6 into the camera.
1
Open the battery compartment
cover.
Slide the lever as shown by the arrow
and open the cover.
the battery.
2 Insert
Insert the end with the battery
Y
P
O
contacts.
Insert the battery until it locks in
place.
the cover.
3 Close
Press the cover until it snaps shut.
C
Only the Battery Pack LP-E6 can be used.
Removing the Battery
Open the cover and remove the
battery.
Press the battery release lever as shown
by the arrow and remove the battery.
To prevent short circuiting, be sure to
attach the protective cover to the battery.
After opening the battery compartment cover, be careful not to swing it back
further.
Otherwise, the hinge might break.
26
Turning on the Power
<2> : The camera is turned off and
does not operate. Set to this
position when not using the
camera.
<1> : The camera turns on.
<J> : The camera and <5> operate
(p.37).
About the Automatic Self-Cleaning Sensor
Whenever you set the power switch to <1/J> or <2>, the
sensor cleaning will be executed automatically. During the sensor
cleaning, the LCD monitor will display <f>. Even during the
sensor cleaning, you can still shoot by pressing the shutter button
halfway (p.35) to stop the sensor cleaning and take a picture.
If you turn on/off the power switch <1/J>/<2> at a short
interval, the <f> icon might not be displayed. This is normal and
not a problem.
C
About Auto Power Off
Y
P
O
To save battery power, the camera turns off automatically after about
1 minute of non-operation. To turn on the camera again, just press
the shutter button halfway (p.35).
You can change the auto power-off time with the menu’s [5 Auto
power off] setting (p.44).
If you set the power switch to <2> while an image is being recorded to
the card, [Recording ...] will be displayed and the power will turn off after
the card finishes recording the image.
27
Turning on the Power
Checking the Battery Level
When the power switch is set to <1> or <J>, the battery level will be
indicated in one of six levels:
Icon Level (%)
Indication
100 - 70 Sufficient battery level
69 - 50 Battery level exceeds 50%
49 - 20 Battery level below 50%
Y
P
O
19 - 10 Battery level is low
9-1
0
Battery Life
Temperature
Possible shots
At 23°C / 73°F
C
Approx. 850
Battery will be exhausted soon
Recharge the battery
At 0°C / 32°F
Approx. 750
The figures above are based on a fully-charged Battery Pack LP-E6, no Live View
shooting, and CIPA (Camera & Imaging Products Association) testing standards.
The actual number of shots may be fewer than indicated above
depending on the shooting conditions.
Pressing the shutter button halfway for long periods or operating only the
autofocus can also reduce the number of possible shots.
The number of possible shots will decrease with more frequent use of
the LCD monitor.
The lens operation is powered by the camera’s battery. Depending on
the lens used, the number of possible shots may be lower.
Using the Image Stabilizer of the lens will decrease the number of
possible shots (shorter battery life).
For battery life with Live View shooting, see page 111.
See the [7 Battery info.] menu to further check the battery’s condition
(p.192).
If size-AA/LR6 batteries are used in Battery Grip BG-E6, a four-level
indicator will be displayed. ([
/
] will not be displayed.)
28
Installing and Removing the CF Card
Although the thickness is different between the two types of CF
(CompactFlash) cards, either one can be inserted into the camera.
Also, Ultra DMA (UDMA) cards and hard disk-type cards can be used.
Installing the Card
1
Open the cover.
Slide the cover as shown by the
arrow to open it.
Y
P
O
the card.
2 Insert
As shown in the illustration, face
Label side
C
Card ejection button
the label side toward you and
insert the end with the small holes
into the camera.
If the card is inserted in the wrong
way, it may damage the camera.
X The card ejection button will stick out.
the cover.
3 Close
Close the cover and slide it in the
Shots remaining
direction shown by the arrow until it
snaps shut.
X When you set the power switch to
<1> or <J>, the number of
remaining shots will be displayed on
the LCD panel.
The number of shots remaining depends on the remaining capacity of
the card, image-recording quality, ISO speed, etc.
Setting the [1 Shoot w/o card] menu option to [Off] will prevent you
from forgetting to install a card (p.200).
29
Installing and Removing the CF Card
Removing the Card
1
Open the cover.
Set the power switch to <2>.
Make sure the access lamp is off,
then open the cover.
Access lamp
the card.
2 Remove
Press the card ejection button.
Y
P
O
X The card will come out.
Close the cover.
Card ejection button
The access lamp lights or blinks while the picture is taken, when
data is being transferred to the card and when data is being
recorded, read, or erased on the card. While the access lamp is lit
or blinking, never do any of the following. Doing so may damage
the image data. It may also damage the card or camera.
• Opening the card slot cover.
• Removing the battery.
• Shaking or banging the camera around.
If the card already contains recorded images, the image number might
not start from 0001 (p.74).
If a card-related error message is displayed on the LCD monitor, remove
and reinstall the card. If the error persists, use a different card.
If you can transfer all the images in the card to a personal computer,
transfer all the images and then format the card. The card may then
return to normal.
When holding a hard disk-type card, always hold its sides. You may
damage the card by holding its flat surfaces. Compared to CF cards,
hard disk-type cards are more vulnerable to vibration and physical
shock. If you use such a card, be careful not to subject the camera to
vibration or physical shock especially while recording or displaying
images.
C
30
Attaching and Detaching a Lens
Attaching a Lens
1
Remove the caps.
Remove the rear lens cap and the
body cap by turning them as shown
by the arrow.
the lens.
2 Attach
Align the red dots on the lens and
camera and turn the lens as shown by
the arrow until it snaps in place.
Y
P
O
the lens, set the focus mode
3 On
switch to <AF> (autofocus).
If it is set to <MF> (manual focus),
autofocus will not operate.
C
4 Remove the front lens cap.
Do not look at the sun directly through any lens. Doing so may cause
loss of vision.
The camera cannot be used with EF-S lenses.
Minimizing Dust
When changing lenses, do it in a place with minimal dust.
When storing the camera without a lens attached, be sure to attach the
body cap to the camera.
Remove dust on the body cap before attaching it.
31
Attaching and Detaching a Lens
About Zooming
To zoom, turn the zoom ring on the lens
with your fingers.
If you want to zoom, do it before
focusing. Turning the zoom ring after
achieving focus may throw off the
focus slightly.
Detaching the Lens
While pressing the lens release
button, turn the lens as shown by
the arrow.
Y
P
O
Turn the lens until it stops, then
detach it.
Attach the dust cap to the detached
lens.
C
Attaching a Hood
When the dedicated EW-83H hood is attached to the EF24-105mm f/4L
IS USM lens, it can block unwanted light and also protect the front of
the lens from rain, snow, dust, etc. When storing the lens in a bag, etc.,
you can also attach the hood in reverse.
the hood’s red mark with
1 Align
the red index on the lens edge.
the hood to the position
2 Turn
shown in the illustration.
Turn the hood clockwise to attach it
securely.
If the hood is not properly attached, the image periphery might look dark.
When attaching or detaching the hood, grasp the hood toward the
bottom to turn it. If you hold the front edge of the hood, it might get bent
out of shape and become unable to turn.
32
About the Lens Image Stabilizer
When you use the IS lens’ built-in Image Stabilizer, camera shake is
corrected to obtain a less blurred shot. The procedure explained here is
based on the EF24-105mm f/4L IS USM lens as an example.
* IS stands for Image Stabilizer.
1
Set the IS switch to <1>.
Set the camera’s power switch to
<1>.
Y
P
O
the shutter button halfway.
2 Press
X The Image Stabilizer will operate.
the picture.
3 TakeWhen
the picture looks steady in the
viewfinder, press the shutter button
completely to take the picture.
C
The Image Stabilizer is not effective for moving subjects.
The Image Stabilizer may not be effective for excessive shaking such as
on a rocking boat.
If you use the EF24-105mm f/4L IS USM lens for panned shots,
correction of camera shake might not be so effective.
The Image Stabilizer can operate with the focus mode switch set to
either <AF> or <MF>.
If the camera is mounted on a tripod, you can save battery power by
switching the IS switch to <2>.
The Image Stabilizer is effective even when the camera is mounted on a
monopod.
33
Basic Operation
Adjusting the Viewfinder Clarity
Turn the dioptric adjustment
knob.
Turn the knob left or right so that the
nine AF points in the viewfinder look
sharp.
If the camera’s dioptric adjustment still cannot provide a sharp viewfinder
image, using Dioptric Adjustment Lens E (10 types, sold separately) is
recommended.
Holding the Camera
Y
P
O
To obtain sharp images, hold the camera still to minimize camera
shake.
C
Horizontal shooting
Vertical shooting
1. Wrap your right hand around the camera grip firmly.
2. Hold the lens bottom with your left hand.
3. Press the shutter button lightly with your right hand’s index finger.
4. Press your arms and elbows lightly against the front of your body.
5. Press the camera against your face and look through the viewfinder.
6. To maintain a stable stance, place one foot in front of the other.
34
Basic Operation
Shutter Button
The shutter button has two steps. You can press the shutter button
halfway. Then you can further press the shutter button completely.
Pressing halfway
This activates autofocusing and
automatic exposure metering that sets
the shutter speed and aperture.
The exposure setting (shutter speed and
aperture) is displayed on the LCD panel
and in the viewfinder (0).
Y
P
O
Pressing completely
This releases the shutter and takes the
picture.
C
Preventing Camera Shake
Camera movement during the moment of exposure is called camera
shake. Camera shake can cause blurred pictures. To prevent camera
shake, note the following:
• Hold and steady the camera as shown on the previous page.
• Press the shutter button halfway to autofocus, then press the
shutter button completely.
In the d/s/f/a/F modes, pressing the <p> button halfway
will execute the same operation.
If you press the shutter button completely without pressing it halfway first
or if you press the shutter button halfway and then press it completely
immediately, the camera will take a moment before it takes the picture.
Even during the menu display, image playback, and image recording,
you can instantly go back to shooting-ready by pressing the shutter
button halfway.
35
Basic Operation
6 Using the Main Dial for Selecting
(1) After pressing a button, turn the
<6> dial.
When you press a button, its function
remains selected for 6 seconds (9).
During this time, you can turn the <6>
dial to set the desired setting.
When the function turns off or if you
press the shutter button halfway, the
camera will be ready to shoot.
Use this dial to select or set the
metering mode, AF mode, ISO
speed, AF point, etc.
Y
P
O
(2) Turn the <6> dial only.
While looking at the viewfinder or LCD
panel, turn the <6> dial to set the
desired setting.
Use this dial to set the shutter speed,
aperture, etc.
C
9 Operating the Multi-controller
The <9> consists of a key with eight
directions and a button at the center.
Use it to select the AF point, correct
the white balance, move the AF point
or magnifying frame during Live View
shooting, scroll the playback image
during magnified view, operate the
Quick Control screen, etc.
You can also use it to select or set
menu options (except [3 Erase
images] and [5 Format]).
36
Basic Operation
5 Using the Quick Control Dial for Selecting
Before using the <5> dial, set the power switch to <J>.
(1) After pressing a button, turn the
<5> dial.
When you press a button, its function
remains selected for 6 seconds (9).
During this time, you can turn the <5>
dial to set the desired setting.
When the function turns off or if you
press the shutter button halfway, the
camera will be ready to shoot.
Use this dial to select or set the white
balance, drive mode, flash exposure
compensation, AF point, etc.
Y
P
O
(2) Turn the <5> dial only.
C
While looking at the viewfinder or LCD
panel, turn the <5> dial to set the
desired setting.
Use this dial to set the exposure
compensation amount, the aperture
setting for manual exposures, etc.
You can also do step (1) when the power switch is set to <1>.
37
9 Using the Quick Control Screen
The shooting settings are displayed on the LCD monitor where you can
quickly select and set the functions. This is called the Quick Control
screen.
1
Display the Quick Control screen.
Press <9> straight down.
X The Quick Control screen will appear.
(
)
the desired setting.
2 SetUse
<9> to select a function.
1 (Full Auto)
C
Y
P
O
In the <1> (Full Auto) mode, you
can select certain drive modes (p.85)
and the image-recording quality
(p.54).
X A brief description of the selected
function is displayed on the screen’s
bottom.
Turn the <5> or <6> dial to
change the setting.
d/s/f/a/F
the picture.
3 TakePress
the shutter button completely to
take the picture.
X The LCD monitor turns off and the
captured image is displayed.
If [8C.Fn III -3: AF point selection method] is set to [1: Multi-controller
direct], the Quick Control screen cannot be displayed (p.179).
Regarding the <C> (Creative Auto) mode, see page 51.
38
9 Using the Quick Control Screen
Quick Control Screen Nomenclature
Picture Style (p.59)
Aperture (p.92)
ISO speed (p.57)
Highlight tone priority
(p.177)
Shutter speed (p.90)
Exposure compensation/
AEB setting (p.97)
Flash exposure
compensation (p.103)
Shooting mode (p.20)
Metering mode (p.95)
AF point (p.81)
Image-recording
quality (p.54)
Y
P
O
Drive mode (p.85)
AF mode (p.78)
White balance (p.65)
Function Setting Display
C
Ð <0>
On the Quick Control screen, select
the function and press <0>. The
respective setting screen will then
appear (except for the shutter speed
and aperture).
Turn the <5> or <6> dial to
change the setting.
Press <0> to return to the Quick
Control screen.
Highlight tone priority <A> cannot be set with the Quick Control screen.
39
3 Menu Operations
You can set various functions with the menus such as the imagerecording quality, date/time, etc. While looking at the LCD monitor, you
use the <M> button on the camera back and the <6> <5> dials.
<M> button
LCD monitor
<6> Main Dial
<5>
Quick Control Dial
Y
P
O
<0> button
Fully-Automatic Modes (1/C) Menu Screen
C
*The [2/8/9] tabs are not displayed in the fully-automatic modes. When
a fully-automatic mode is set, there are menu items which are not displayed.
d/s/f/a/F Menu Screen
3 Playback
1 Shooting
5 Set-up
8 Custom Functions
9 My Menu
Tab
Menu settings
Menu items
40
3 Menu Operations
Menu Setting Procedure
1
Display the menu.
Press the <M> button to display
the menu.
a tab.
2 Select
Turn the <6> dial to select a tab.
the desired item.
3 Select
Turn the <5> dial to select the item,
Y
P
O
then press <0>.
the setting.
4 Select
Turn the <5> dial to select the
C
desired setting.
The current setting is indicated in
blue.
the desired setting.
5 SetPress
<0> to set it.
the menu.
6 ExitPress
the <M> button to exit the
menu and return to camera shooting.
The explanation of menu functions hereinafter assumes that you have
pressed the <M> button to display the menu screen.
You can also use <9> to set menu settings. (Except for [3 Erase
images] and [5 Format].)
41
Before You Start
3 Setting the Interface Language
1
Select [Language].
Under the [6] tab, select
[Language] (the third item from the
top), then press <0>.
the desired language.
2 SetTurn
the <5> or <6> dial to select
the language, then press <0>.
X The language will change.
Y
P
O
3 Setting the Date and Time
Check if the camera’s date and time are set correctly. If necessary, set
the correct date and time.
C
1
Select [Date/Time].
Under the [6] tab, select [Date/
Time], then press <0>.
the date, time and date display format.
2 SetTurn
the <5> dial to select the number.
Press <0> so
is displayed.
Turn the <5> dial to select the desired
).
setting, then press <0> (Returns to
3 ExitTurnthethesetting.
<5> dial to select [OK],
then press <0>.
X The date/time will be set and the
menu will reappear.
It is important to set the correct date/time because it will be recorded
together with each captured image.
42
Before You Start
3 Formatting the Card
If the card is new or was previously formatted by another camera or
personal computer, formatting the card with the camera is
recommended.
When the card is formatted, all images and data in the card will
be erased. Even protected images will be erased, so make
sure there is nothing you need to keep. If necessary, transfer
the images to a personal computer, etc., before formatting the
card.
1
Select [Format].
2
Select [OK].
C
Y
P
O
Under the [5] tab, select [Format],
then press <0>.
Turn the <5> dial to select [OK],
then press <0>.
X The card will be formatted.
X When the formatting is completed,
the menu will reappear.
When the card is formatted or data is erased, only the file management
information is changed. The actual data is not completely erased. Be aware
of this when selling or discarding the card. When discarding the card,
destroy the card physically to prevent personal data from being leaked.
The card capacity displayed on the card format screen might be smaller
than the capacity indicated on the card.
43
Before You Start
3 Set the Power-off Time/Auto Power Off
You can change the auto power-off time for the camera to turn off
automatically after a certain period of non-operation. If you do not want
the camera to turn off automatically, set this to [Off]. After the power
turns off, you can turn on the camera again by pressing the shutter
button or other button.
1
Select [Auto power off].
Under the [5] tab, select [Auto
power off], then press <0>.
Y
P
O
the desired time.
2 SetTurn
the <5> dial to select the
setting, then press <0>.
Even if [Off] has been set, the LCD monitor will turn off automatically after
30 min. to save power. (The camera’s power does not turn off.)
C
44
Before You Start
3 Reverting the Camera to the Default SettingsN
The camera’s shooting settings and menu settings can be reverted to the default.
1
Select [Clear settings].
Under the [7] tab, select [Clear
settings], then press <0>.
[Clear all camera settings].
2 Select
Turn the <5> dial to select [Clear all
Y
P
O
camera settings], then press <0>.
[OK].
3 Select
Turn the <5> dial to select [OK],
C
Shooting Settings
AF mode
then press <0>.
X Setting [Clear all camera settings]
will reset the camera to the following
default settings:
One-Shot AF
Image-Recording Settings
Quality
73
ISO speed
Auto
q (Evaluative
metering)
Picture Style
Standard
Color space
sRGB
Drive mode
u (Single shooting)
White balance
Q (Auto)
Exposure
compensation
0 (Zero)
WB correction
Canceled
AEB
Canceled
AF point selection Automatic selection
Metering mode
Flash exposure
0 (Zero)
compensation
Live View
shooting
Disable
Custom Functions No changes
WB-BKT
Canceled
Peripheral
illumination
correction
Enable/
Correction
data retained
File numbering
Continuous
Auto cleaning
Enable
Dust Delete Data
Erased
45
Before You Start
Camera Settings
Camera Settings
Auto power off
1 min.
On
Image jump w/6
Auto rotate
10 images
Beep
Shoot w/o card
On
LCD brightness
Auto: Standard
Review time
2 sec.
Date/Time
No changes
Highlight alert
Disable
Language
No changes
AF point display
Disable
Video system
No changes
Histogram
Brightness
Camera user settings No changes
My Menu settings
OnzD
No changes
Y
P
O
3 About Copyright InformationN
If you use EOS Utility (provided software) to set your copyright
information, the copyright information will be added to the image’s Exif
information. With the camera, the copyright information can only be
viewed or deleted. If your copyright information has not been set, it will
be grayed out on the screen and unusable.
With the [Clear settings] screen
displayed, press the <B> button to
display the copyright information.
Press the <M> button to return
to the [Clear settings] screen.
To delete the copyright information,
select [Delete copyright
information] on the [Clear settings]
screen.
C
46
2
Basic Shooting
Y
P
O
This chapter explains how to use the fully-automatic
modes (1/C) on the Mode Dial for best results.
With the fully-automatic modes (1/C), all you do is point
and shoot and the camera sets everything automatically
(p.198). Also, to prevent botched pictures due to mistaken
operations, major shooting settings cannot be changed in the
fully-automatic modes.
C
Fullyautomatic
modes
About the Auto Lighting Optimizer
In the fully-automatic modes (1/C), the Auto Lighting Optimizer
will adjust the image automatically to obtain the optimum
brightness and contrast. In the d/s/f modes, the Auto
Lighting Optimizer is enabled by default (p.177).
47
1 Fully Automatic Shooting
1
Set the Mode Dial to <1>.
any AF point over the
2 Aim
subject.
AF point
All the AF points will be used to focus,
and generally the closest object will
be focused.
Aiming the center AF point over the
subject will make focusing easier.
Y
P
O
the subject.
3 Focus
Press the shutter button halfway, and
C
the lens focusing ring will rotate to
focus.
X The AF point which achieves focus
will briefly flash in red. At the same
time, the beeper will sound and the
focus confirmation light <o> in the
viewfinder will light.
Focus confirmation light
the picture.
4 TakePress
the shutter button completely to
take the picture.
X The captured image will be displayed
for about 2 sec. on the LCD monitor.
48
1 Fully Automatic Shooting
FAQ
The focus confirmation light <o> blinks and focus is not
achieved.
Aim the AF point over an area having good contrast between light
and dark, then press the shutter button halfway (p.84). If you are too
close to the subject, move away and try again.
Sometimes multiple AF points flash simultaneously.
This indicates that focus has been achieved at all those AF points.
As long as the AF point covering the desired subject flashes, you
can take the picture.
Y
P
O
The beeper continues to beep softly. (The focus confirmation
light <o> also does not light.)
It indicates that the camera is focusing continuously on a moving
subject. (The focus confirmation light <o> does not light.) While the
beeper is beeping, you can press the shutter button completely to
shoot a moving subject in focus.
C
Pressing the shutter button halfway does not focus the subject.
When the focus mode switch on the lens is set to <MF> (Manual
Focus), the camera does not focus. Set the focus mode switch to
<AF> (Auto Focus).
The shutter speed display is blinking.
Since it is too dark, taking the picture may result in a blurred shot
due to camera shake. Either use a tripod or an external EX-series
Speedlite (sold separately, p.103) when shooting.
Although I used an external Speedlite, the bottom part of the
photo came out dark.
If the lens hood is attached, it will obstruct the flash. If the subject is
near to the camera, detach the hood before shooting with flash.
49
1 Full Auto Techniques
Recomposing the Shot
Depending on the scene, position the subject toward the left or right to
create a balanced background and good perspective.
In the <1> (Full Auto) mode, while you press the shutter button
halfway to focus a still subject, the focus will be locked. You can then
recompose the shot and press the shutter button completely to take the
picture. This is called “focus lock”.
Y
P
O
Shooting a Moving Subject
C
In the <1> (Full Auto) mode, if the subject moves (distance to camera
changes) during or after you focus, AI Servo AF will take effect to focus
the subject continuously. As long as you keep aiming the AF point on
the subject while pressing the shutter button halfway, the focusing will
be continuous. When you want to take the picture, press the shutter
button completely.
50
C Creative Auto Shooting
The <1> Full Auto mode takes care of everything, whereas the <C>
Creative Auto mode enables you to easily change the picture’s
brightness, depth of field, color tone (Picture Style), etc. The default
settings are the same as the <1> (Full Auto) mode.
* CA stands for Creative Auto.
1
Set the Mode Dial to <C>.
X The Creative Auto screen appears on
the LCD monitor.
<9> straight down.
2 Press
X You can use <9> to select a
Y
P
O
function. (
)
Functions (1) to (5) shown on the next
page can be selected.
the desired setting.
3 SetUse
<9> to select the function.
C
X A brief description of the selected
function is displayed on the screen’s
bottom.
Turn the <5> or <6> dial to
change the setting.
Press <9> straight down to return to
step 2 screen.
the picture.
4 TakeWhen
the picture is taken, the LCD
monitor turns off.
If you change the shooting mode or turn off the power switch, the Creative
Auto settings will revert to the default. However, the image-recording quality,
self-timer and remote control settings will be retained.
51
C Creative Auto Shooting
Shutter speed and aperture
ISO speed
(1)
(2)
(3)
(5)
(4)
Possible shots
Battery check
Maximum burst
Y
P
O
(1) Blurring/sharpening the background
If you move the index mark toward the left, the background will look
more blurred. If you move it toward the right, the background will
look more in focus.
(2) Adjusting the picture brightness
If you move the index mark toward the left, the picture will look
darker. If you move it toward the right, the picture will look brighter.
C
(3) Picture Style
You can select one of four Picture Styles (p.59, 60).
(4) Single, continuous, self-timer, and remote control shooting
If you select <i>, you can shoot continuously up to about 3.9 shots
per sec. If you select <Q>, see the notes ( ) for “Self-timer
Operation” on page 86 and for “Remote Control Shooting” on page
102.
(5) Image-recording quality
When you press <0>, the image-recording quality setting screen
will appear. To set the image-recording quality, see “Setting the
Image-recording Quality” on page 54. After adjusting all the desired
settings, press <0> to return to the screen in step 2 on the
previous page.
When using an external flash, (1) cannot be set.
52
3
Image Settings
Y
P
O
This chapter explains image-related function settings:
Image-recording quality, ISO speed, Picture Styles,
white balance, color space, etc.
C
In the fully-automatic modes (1/C), only the imagerecording quality, lens peripheral illumination correction,
and file numbering method can be set as explained in this
chapter. Folders can also be created and selected.
The M icon on the right of the page title indicates that the
function can be used when the Mode Dial is set to <d/s/
f/a/F>.
53
3 Setting the Image-recording Quality
You can select the pixel count and the image quality. There are six JPEG
recording quality settings: 73, 83, 74, 84, 76, and 86. There
are three RAW recording quality settings: 1, D1, and D2. RAW
images must be processed with the provided software (p.56).
1
Select [Quality].
Under the [1] tab, select [Quality],
then press <0>.
the image-recording quality.
2 Select
To select a RAW setting, turn the
C
Y
P
O
<6> dial. To select a JPEG setting,
turn the <5> dial.
On the upper right, the “***M
(megapixels) **** x ****” number
indicates the recorded pixel count,
and [***] is the number of possible
shots (displayed up to 999).
Press <0> to set the selected quality.
Image-recording Quality Setting Examples
73 only
1+73
1 only
D2+74
* If [–] is set for both RAW and JPEG, 73 will be set.
54
3 Setting the Image-recording Quality
Guide to Image-recording Quality Settings (Approx.)
Quality
73
83
JPEG
74
84
76
86
1
Pixels
(megapixels)
Printing
Size
Approx. 21.0
(21.0M)
A2 or larger
Approx. 11.1
(11.1M)
Around A3
File Size
(MB)
Possible
Shots
Maximum
Burst
6.1
310
78 (310)
3.0
610
610 (610)
3.6
510
330 (510)
1.9
990
990 (990)
2.1
910
910 (910)
1.0
1680
1680 (1680)
Approx. 5.2
(5.2M)
Around A4
Approx. 21.0
(21.0M)
A2 or larger
25.8
72
13 (14)
Around A3
14.8
120
15 (15)
Around A4
10.8
170
20 (20)
A2 or larger
A2 or larger
25.8+6.1
57
8 (8)
Around A3
A2 or larger
14.8+6.1
89
8 (8)
Around A4
A2 or larger
10.8+6.1
110
8 (8)
RAW D1
Approx. 10.0
(9.9M)
D2
Approx. 5.2
(5.2M)
1
73
Approx. 21.0
Approx. 21.0
RAW
D1
+
73
JPEG
Approx. 10.0
Approx. 21.0
D2
73
Approx. 5.2
Approx. 21.0
C
Y
P
O
Figures for the file size, possible shots, and maximum burst during continuous
shooting are based on Canon’s testing standards (ISO 100 and Standard
Picture Style) using a 2GB card. These figures will vary depending on the
subject, card brand, ISO speed, Picture Style, Custom Functions, etc.
Maximum burst during continuous shooting figures in parentheses apply to an
Ultra DMA (UDMA) 2GB card based on Canon’s testing standards.
If you select both RAW and JPEG, the same image will be recorded
simultaneously to the card in both types at the selected image-recording
quality. The two images will be saved in the same folder with the same
file numbers (file extension .JPG for JPEG and .CR2 for RAW).
When D1 or D2 is selected, the LCD panel will display D.
The icons are read as follows: 1 (RAW), D1 (Small RAW1),
D2 (Small RAW2), JPEG, 7 (Fine), 8 (Normal), 3 (Large), 4
(Medium), and 6 (Small).
55
3 Setting the Image-recording Quality
About RAW
The RAW image is the data output by the image sensor, converted to
digital data and recorded on the card as is. You can select it from
among 1, D1, or D2. “RAW” written in the text will refer to
all three RAW settings: 1, D1, and D2.
With RAW images, you can use the provided software to make various
adjustments as needed. From the RAW image, the software can
develop and produce the adjusted image in the desired type such as
JPEG or TIFF.
Y
P
O
About [8C.Fn II -2: High ISO speed noise reduction] and
RAW or RAW+JPEG images
Although [8C.Fn II -2: High ISO speed noise reduction] (p.176) settings
(Standard/Low/Strong/Disable) are applied to the recorded images, the
images used for image playback (on the LCD monitor or TV screen) and
direct printing (except RAW+73/83) are not applied with noise reduction
(noise may be noticeable in the images).
Confirm the noise reduction effects or print noise-reduced images with
Digital Photo Professional (provided software).
C
Commercial software might not be able to display RAW images. Using the
provided software is recommended.
Maximum Burst During Continuous Shooting
The maximum burst during continuous shooting indicated on the
preceding page is the number of continuous shots that can be taken
without stopping, based on a formatted 2GB card.
The number is displayed in the
viewfinder on the bottom right. If the
maximum burst is 99 or higher, “99” will
be displayed.
56
3 Setting the Image-recording Quality
The maximum burst is displayed even when a card is not in the camera.
Make sure that a card is loaded before taking a picture.
If [8C.Fn II -2: High ISO speed noise reduction] is set to [2: Strong],
the maximum burst will be greatly reduced (p.176).
If the viewfinder displays “99” for the maximum burst, it means the maximum
burst is 99 or higher. If 98 or lower is displayed, the maximum burst is 98 or
lower. If you stop the continuous shooting, the maximum burst will increase.
After all the captured images are written to the card, the maximum burst will
be as listed on page 55.
Y
P
O
i: Setting the ISO SpeedN
Set the ISO speed (image sensor’s sensitivity to light) to suit the
ambient light level. In the fully-automatic modes (1/C), the ISO
speed is set automatically (p.58).
C
1
Press the <m> button. (9)
the ISO speed.
2 SetWhile
looking at the LCD panel or
viewfinder, turn the <6> dial.
It can be set within ISO 100-6400 in
1/3-stop increments.
With “A” selected, the ISO speed will
be set automatically (p.58).
57
i: Setting the ISO SpeedN
ISO Speed Guide
ISO Speed
Shooting Situation
(No flash)
L, 100 - 200
Sunny outdoors
400 - 800
Overcast skies, evening
1600 - 6400, H1, H2
Dark indoors or night
Flash Range
The higher the ISO speed,
the farther the flash range
will be.
If [8C.Fn II -3: Highlight tone priority] is set to [1: Enable], the
settable ISO speed range will be ISO 200 - 6400 (p.177).
Using a high ISO speed or shooting in high-temperature conditions may
result in more grainy images. Long exposures can also cause irregular
colors in the image.
When you shoot at high ISO speeds, horizontal stripes may appear as
noise.
Y
P
O
With [8C.Fn I -3: ISO expansion] set to [1: On], “L” (equivalent to ISO 50),
“H1” (equivalent to ISO 12800), and “H2” (equivalent to ISO 25600) can also
be set (p.174).
C
About “A” (Auto) ISO Speed
If the ISO speed is set to “A”, the actual
ISO speed to be set will be displayed
when you press the shutter button
halfway. As indicated below, the ISO
speed will be set automatically to suit the
shooting mode.
Shooting Mode
ISO Speed Setting
1/C/d/s/f
ISO 100 - 3200
a/ F
Fixed at ISO 400
With flash
Fixed at ISO 400*
* If fill flash results in overexposure, ISO 100 or a higher ISO will be set.
58
A Selecting a Picture StyleN
By selecting a Picture Style, you can obtain image effects matching
your photographic expression or the subject.
In the <1> (Full Auto) mode, you cannot select the Picture Style.
1
Press the <A> button.
When the camera is ready to shoot,
press the <A> button.
X The Picture Style screen will appear.
a Picture Style.
2 Select
Turn the <6> or <5> dial to select
Y
P
O
a Picture Style, then press <0>.
X The Picture Style will take effect and
the camera will be ready to shoot.
You can also use the [2 Picture Style] menu to select the Picture Style.
C
Picture Style Effects
P Standard (C: Standard)
The image looks vivid, sharp, and crisp. This is a general-purpose
Picture Style suitable for most scenes. This is set automatically in
the <1> (Full Auto) mode.
Q Portrait (C: Smooth skin tones)
For nice skin tones. The image looks softer. Effective for close-ups
of women or children.
By changing the [Color tone] (p.61), you can adjust the skin tone.
R Landscape (C: Vivid blues and greens)
For vivid blues and greens, and very sharp and crisp images.
Effective for impressive landscapes.
59
A Selecting a Picture StyleN
S Neutral
This Picture Style is for users who prefer to process images with
their personal computer. For natural colors and subdued images.
U Faithful
This Picture Style is for users who prefer to process images with
their personal computer. When the subject is captured under a color
temperature of 5200K, the color is adjusted colorimetrically to match
the subject’s color. The image is dull and subdued.
V Monochrome (C: Monochrome image)
For black-and-white images.
Y
P
O
Black-and-white images shot in JPEG cannot be reverted to color. If
you want to later shoot pictures in color, make sure the
[Monochrome] setting has been canceled. When [Monochrome] is
selected, <0> will appear in the viewfinder and on the LCD panel.
W User Def. 1-3
You can register your own Picture Style settings for [Portrait],
[Landscape], etc (p.63). Any User Defined Picture Style which has not
been set will have the same settings as the Standard Picture Style.
C
About the Symbols
The symbols on the top of the Picture Style selection screen refer to
parameters such as [Sharpness] and [Contrast]. The numerals
indicate the parameter settings, such as [Sharpness] and [Contrast],
for each Picture Style.
Symbols
g
60
Sharpness
h
Contrast
i
Saturation
j
Color tone
k
Filter effect (Monochrome)
l
Toning effect (Monochrome)
A Customizing a Picture StyleN
You can customize a Picture Style by adjusting individual parameters
like [Sharpness] and [Contrast]. To see the resulting effects, take test
shots. To customize [Monochrome], see the next page.
1 Press the <A> button.
a Picture Style.
2 Select
Turn the <6> or <5> dial to select
a Picture Style, then press the <B>
button.
Y
P
O
a parameter.
3 Select
Turn the <5> dial to select a
parameter, then press <0>.
C
the parameter.
4 SetTurn
the <5> dial to adjust the
parameter as desired, then press
<0>.
Press the <M> button to save
the adjusted parameter. The Picture
Style selection screen will reappear.
X Any settings different from the default
will be displayed in blue.
Parameter Settings and Effects
g Sharpness
0: Less sharp outline
h Contrast
-4: Low contrast
+7: Sharp outline
+4: High contrast
i Saturation
-4: Low saturation
+4: High saturation
j Color tone
-4: Reddish skin tone
+4: Yellowish skin tone
61
A Customizing a Picture StyleN
By selecting [Default set.] in step 3, you can revert the respective
Picture Style to its default parameter settings.
To shoot with the Picture Style you modified, follow step 2 on the
preceding page to select the modified Picture Style and then shoot.
Monochrome Adjustment
For Monochrome, you can also set [Filter effect] and [Toning effect] in
addition to [Sharpness] and [Contrast] explained on the preceding
page.
kFilter Effect
Y
P
O
With a filter effect applied to a
monochrome image, you can make
white clouds or green trees stand out
more.
Filter
C
Sample Effects
N: None
Normal black-and-white image with no filter effects.
Ye:Yellow
The blue sky will look more natural, and the white clouds will look crisper.
Or:Orange The blue sky will look slightly darker. The sunset will look more brilliant.
R: Red
The blue sky will look quite dark. Fall leaves will look crisper and brighter.
G: Green
Skin tones and lips will look fine. Tree leaves will look crisper and brighter.
Increasing the [Contrast] will make the filter effect more pronounced.
lToning Effect
By applying a toning effect, you can
create a monochrome image in that
color. It can make the image look more
impressive.
The following can be selected: [N:None]
[S:Sepia] [B:Blue] [P:Purple]
[G:Green].
62
A Registering a Picture StyleN
You can select a base Picture Style such as [Portrait] or [Landscape], adjust
its parameters as desired and register it under [User Def. 1], [User Def. 2], or
[User Def. 3]. You can create Picture Styles whose parameter settings such as
for sharpness and contrast are different. You can also adjust the parameters of a
Picture Style which has been registered to the camera with the provided software.
1 Press the <A> button.
[User Def.].
2 Select
Turn the <6> or <5> dial to select
[User Def. *], then press the <B>
button.
Y
P
O
<0>.
3 Press
With [Picture Style] selected, press
C
<0>.
the base Picture Style.
4 Select
Turn the <5> dial to select the base
Picture Style, then press <0>.
To adjust the parameters of a Picture
Style which has been registered to the
camera with the provided software,
select the Picture Style here.
a parameter.
5 Select
Select a parameter such as
[Sharpness], then press <0>.
63
A Registering a Picture StyleN
the parameter.
6 SetTurn
the <5> dial to adjust the
parameter as desired, then press
<0>.
For details, see “Customizing a
Picture Style” on pages 61-62.
Press the <M> button to register
the new Picture Style. The Picture
Style selection screen will then
reappear.
X The base Picture Style will be
indicated on the right of [User Def. *].
C
Y
P
O
If a Picture Style has already been registered under [User Def. *], changing
the base Picture Style in step 4 will nullify the parameter settings of the
registered Picture Style.
To shoot with the registered Picture Style, follow step 2 on the preceding
page to select [User Def. *] and then shoot.
64
B: Setting the White BalanceN
White balance (WB) is for making the white areas look white. Normally, the
<Q> (Auto) setting will obtain the correct white balance. If natural-looking
colors cannot be obtained with <Q>, you can select the white balance for
each light source or set it manually by shooting a white object. In the fullyautomatic modes (1/C), <Q> is set automatically.
1 Press the <n> button. (9)
the white balance.
2 Select
While looking at the LCD panel, turn
the <5> dial.
Display
Q
Mode
Auto
Y
P
O
Color Temperature (Approx. K: Kelvin)
3000 - 7000
W
Daylight
E
Shade
R
Cloudy, twilight, sunset
6000
Y
Tungsten light
3200
U
White fluorescent light
I
Flash use
C
5200
7000
4000
6000
O
Custom (p.66)
2000 - 10000
P
Color temperature (p.67)
2500 - 10000
About White Balance
To the human eye, a white object looks white regardless of the type of
lighting. With a digital camera, the color temperature is adjusted with
software to make the white areas look white. This adjustment serves as
the basis for the color correction. The result is natural-looking colors in
the pictures.
You can also use the [2 White balance] menu to set the white balance.
65
B: Setting the White BalanceN
O
Custom White Balance
Custom white balance enables you to manually set the white balance
for a specific light source for better accuracy. Do this procedure under
the actual light source to be used.
1
Photograph a white object.
Spot metering circle
The plain, white object should fill the
spot metering circle.
Focus manually and set the standard
exposure for the white object.
You can set any white balance.
Y
P
O
[Custom WB].
2 Select
Under the [2] tab, select [Custom
C
WB], then press <0>.
X The custom white balance selection
screen will appear.
the white balance data.
3 Import
Turn the <6> or <5> dial to select
the image captured in step 1, then
press <0>.
X On the dialog screen which appears,
select [OK] and the data will be
imported.
the <n> button. (9)
4 Press
After exiting the menu, press the
<n> button.
the custom white balance.
5 Select
Look at the LCD panel and turn the
<5> dial to select <O>.
66
B: Setting the White BalanceN
If the exposure obtained in step 1 is way off, a correct white balance
might not be obtained.
If the image was captured while the Picture Style was set to
[Monochrome] (p.60), it cannot be selected in step 3.
Instead of a white object, an 18% gray card (commercially available) can
produce a more accurate white balance.
The personal white balance registered with the provided software will be
registered under <O>. If you do step 3, the data for the registered
personal white balance will be erased.
Y
P
O
P Setting the Color Temperature
You can set the white balance’s color temperature numerically in Kelvin.
This is for advanced users.
1
C
Select [White balance].
Under the <2> tab, select [White
balance], then press <0>.
the color temperature.
2 SetTurn
the <5> dial to select the [P].
Turn the <6> dial to set the color
temperature, then press <0>.
The color temperature can be set
from 2500K to 10000K in 100K
increments.
When setting the color temperature for an artificial light source, set white
balance correction (magenta or green) as necessary.
If you want to set <P> to the reading taken with a commerciallyavailable color temperature meter, take test shots and adjust the setting
to compensate for the difference between the color temperature meter’s
reading and the camera’s color temperature reading.
67
u White Balance CorrectionN
You can correct the white balance that has been set. This adjustment
will have the same effect as using a commercially-available color
temperature conversion filter or color compensating filter. Each color
can be corrected to one of nine levels.
This is for advanced users who are familiar with using color temperature
conversion or color compensating filters.
White Balance Correction
1
Select [WB SHIFT/BKT].
Under the [2] tab, select [WB
SHIFT/BKT], then press <0>.
Y
P
O
the white balance correction.
2 SetUse
<9> to move the “ ” mark to the
C
Sample setting: A2, G1
desired position.
B is for blue, A is amber, M is
magenta, and G is green. The color in
the respective direction will be
corrected.
On the upper right, “SHIFT” indicates
the direction and correction amount.
Pressing the <B> button will
cancel all the [WB SHIFT/BKT]
settings.
Press <0> to exit the setting and
return to the menu.
During the white balance correction, <u> will be displayed in the
viewfinder and on the LCD panel.
One level of the blue/amber correction is equivalent to 5 mireds of a color
temperature conversion filter. (Mired: Measuring unit indicating the
density of a color temperature conversion filter.)
68
u White Balance CorrectionN
White Balance Auto Bracketing
With just one shot, three images having a different color tone can be recorded
simultaneously. Based on the color temperature of the current white balance
setting, the image will be bracketed with a blue/amber bias or magenta/green
bias. This is called white balance bracketing (WB-BKT). White balance
bracketing is possible up to ±3 levels in single-level increments.
Set the white balance bracketing amount.
B/A bias ±3 levels
C
Bracketing Sequence
In step 2 for white balance correction,
when you turn the <5> dial, the “ ” mark
on the screen will change to “
”
(3 points). Turning the dial to the right sets
the B/A bracketing, and turning it to the
left sets the M/G bracketing.
X On the right side of the screen, “BKT”
indicates the bracketing direction and
the bracketing amount.
Pressing the <B> button will cancel
all the [WB SHIFT/BKT] settings.
Y
P
O
Press <0> to exit the setting and
return to the menu.
The images will be bracketed in the following sequence: 1. Standard
white balance, 2. Blue (B) bias, and 3. Amber (A) bias, or 1. Standard
white balance, 2. Magenta (M) bias, 3. Green (G) bias.
During WB bracketing, the maximum burst for continuous shooting will be
lower and the number of possible shots will also decrease to one-third the
normal number. Also, the white balance icon will blink on the LCD panel.
You can also set white balance correction and AEB together with white
balance bracketing. If you set AEB in combination with white balance
bracketing, a total of nine images will be recorded for a single shot.
Since three images are recorded for one shot, the card will take longer to
record the shot.
“BKT” stands for Bracketing.
69
3 Lens Peripheral Illumination Correction
Due to the lens characteristics, the four corners of the picture might look
darker. This is called lens light fall-off or drop in peripheral illumination.
This can be corrected. For JPEG images, lens light fall-off is corrected
when the image is captured. For RAW images, it can be corrected with
Digital Photo Professional (provided software).
The default setting is [Enable].
1
Select [Peripheral illumin.
correct.].
Under the [1] tab, select
[Peripheral illumin. correct.], then
press <0>.
Y
P
O
setting.
2 SetOnthethecorrection
screen, check that the
C
attached lens’ [Correction data
available] is displayed.
If [Correction data not available] is
displayed, see “About the Lens
Correction Data” on the next page.
Turn the <5> dial to select [Enable],
then press <0>.
picture.
3 TakeThetheimage
will be recorded with the
Correction enabled
70
corrected peripheral illumination.
Correction disabled
3 Lens Peripheral Illumination Correction
About the Lens Correction Data
The camera already contains lens peripheral light correction data for
about 25 lenses. In step 2, if you select [Enable], the peripheral light
correction will be applied automatically for any lens whose correction
data has been registered in the camera.
With the EOS Utility (provided software), you can check which lenses
have their correction data registered in the camera. You can also
register the correction data for unregistered lenses. For details, see the
Software Instruction Manual (CD-ROM) for EOS Utility.
C
Y
P
O
For JPEG images already captured, lens peripheral light correction
cannot be applied.
Depending on shooting conditions, noise might appear on the image
periphery.
When using a third-party lens, setting the correction to [Disable] is
recommended, even if [Correction data available] is displayed.
Lens peripheral light correction is applied even when an Extender is
attached.
If the correction data for the attached lens has not been registered to the
camera, the result will be the same as when the correction is set to
[Disable].
The correction amount applied will be slightly lower than the maximum
correction amount settable with Digital Photo Professional (provided
software).
If the lens does not have distance information, the correction amount will
be lower.
The higher the ISO speed, the lower the correction amount will be.
71
3 Creating and Selecting a Folder
You can freely create and select the folder where the captured images
are to be saved.
This is optional since a folder will be created automatically for saving
captured images.
Create a Folder
1
Select [Select folder].
Under the [5] tab, select [Select
folder], then press <0>.
Y
P
O
[Create folder].
2 Select
Turn the <5> dial to select [Create
folder], then press <0>.
C
a new folder.
3 Create
Turn the <5> dial to select [OK],
72
then press <0>.
X A new folder with a higher one-up
folder number is created.
3 Creating and Selecting a Folder
Selecting a Folder
Lowest file number
Quantity of images
in folder
Folder name
Highest file number
C
About Folders
With the Select folder screen
displayed, turn the <5> dial to select
the desired folder, then press <0>.
X The folder where the captured
images will be saved will be selected.
Subsequent captured images will be
recorded into the selected folder.
Y
P
O
As with “100EOS5D” for example, the folder name starts with three digits
(folder number) followed by five alphanumeric characters. A folder can contain
up to 9999 images (file No. 0001 - 9999). When a folder becomes full, a new
folder with a higher one-up folder number is created automatically. Also, if
manual reset (p.75) is executed, a new folder will be created automatically.
Folders numbered from 100 to 999 can be created.
Creating Folders with a Personal Computer
With the card open on the screen, create a new folder named “DCIM”. Open
the DCIM folder and create as many folders as necessary to save and
organize your images. The folder name must follow the “100ABC_D” format
where the first three digits is 100 - 999 followed by five alphanumeric
characters. The five characters can be a combination of upper- or lower-case
letters from A to Z, numerals, and an underscore “_”. There can be no space in
the folder name. Also, folder names cannot have the same three-digit number
such as “100ABC_D” and “100W_XYZ” even if the letters are different.
73
3 File Numbering Methods
The file number is like the frame number on a roll of film. The captured
images are assigned a sequential file number from 0001 to 9999 and
saved in one folder. You can change how the file number is assigned.
The file number will appear on a personal computer in this format:
IMG_0001.JPG.
1
Select [File numbering].
Under the [5] tab, select [File
numbering], then press <0>.
the file numbering method.
2 Select
Turn the <5> dial to select the
Y
P
O
desired method, then press <0>.
Continuous
Continues the file numbering sequence even after the card is
replaced or a new folder is created.
Even after you replace the card or create a new folder, the file
numbering continues in sequence up to 9999. This is convenient when
you want to save the images numbered anywhere between 0001 to
9999 in multiple cards or folders into one folder in your personal
computer.
If the replacement card or existing folder already contains images
recorded previously, the file numbering of the new images might
continue from the file numbering of the existing images in the card or
folder. If you want to use continuous file numbering, you should use a
newly-formatted card each time.
C
File numbering after
replacing the card
Card-1
Card-1
Card-2
XXX-0051
XXX-0052
Next sequential file
74
File numbering after
creating a folder
100
101
XXX-0051
XXX-0052
3 File Numbering Methods
Auto Reset
The file numbering restarts from 0001 each time the card is
replaced or a new folder is created.
Whenever the card is replaced or a new folder created, the file
numbering starts from 0001. This is convenient if you want to organize
images according to cards or folders. If the replacement card or existing
folder already contains images recorded previously, the file numbering
of the new images might continue from the file numbering of the existing
images in the card or folder. If you want to save images with the file
numbering starting from 0001, use a newly formatted card each time.
Y
P
O
File numbering after
replacing the card
Card-1
File numbering after
creating a folder
Card-1
Card-2
XXX-0051
100-0001
100
101
XXX-0051
XXX-0001
File numbering is reset
C
Manual Reset
To reset the file numbering to 0001 or to start from file number
0001 in a new folder
When you reset the file numbering manually, a new folder is created
automatically and the file numbering of images saved to that folder starts
from 0001. This is convenient when you want to use different folders for the
images taken yesterday and the ones taken today, for example. After the
manual reset, the file numbering returns to continuous or auto reset.
If the file number in the folder No. 999 reaches 9999, shooting will not be
possible even if the card still has storage capacity. The LCD monitor will
display a message to replace the card. Replace with a new card.
For both JPEG and RAW images, the file name will start with “IMG_”. Movie
file names will start with “MVI_”. The extension will be “.JPG” for JPEG
images, “.CR2” for RAW images, and “.MOV” for movies.
75
3 Setting the Color SpaceN
The color space refers to the range of reproducible colors. With this
camera, you can set the color space for captured images to sRGB or
Adobe RGB. For normal shooting, sRGB is recommended.
In the fully-automatic modes (1/C), sRGB is set automatically.
1
Select [Color space].
Under the [2] tab, select [Color
space], then press <0>.
the desired color space.
2 SetSelect
[sRGB] or [Adobe RGB], then
press <0>.
About Adobe RGB
Y
P
O
This color space is mainly used for commercial printing and other
industrial uses. This setting is not recommended if you do not know
about image processing, Adobe RGB, and Design rule for Camera File
System 2.0 (Exif 2.21). The image will look very subdued in the sRGB
personal computer environment and with printers not compatible with
Design rule for Camera File System 2.0 (Exif 2.21). Post-processing of
the image with software will therefore be required.
C
If the image is captured with the color space set to Adobe RGB, the file
name will start with “_MG_” (first character is an underscore).
The ICC profile is not appended. The ICC profile is explained in the
Software Instruction Manual in the CD-ROM.
76
4
Setting the AF and
Drive Modes
Y
P
O
The viewfinder has 9 AF points. By
selecting a suitable AF point, you
can shoot with autofocus while
framing the subject as desired.
C
You can also select the AF mode and drive mode best
matching the shooting conditions and subject.
The M icon on the right of the page title indicates that the
function can be used when the Mode Dial is set to <d/s/
f/a/F>.
In the fully-automatic modes (1/C), the AF mode, AF
point selection, and drive mode are set automatically.
<AF> stands for auto focus. <MF> stands for manual focus.
77
f: Selecting the AF ModeN
Select the AF mode suiting the shooting conditions or subject. In the
fully-automatic modes (1/C), “AI Focus AF” is set automatically.
1
On the lens, set the focus mode
switch to <AF>.
2 Press the <o> button. (9)
Y
P
O
the AF mode.
3 Select
While looking at the LCD panel, turn
the <6> dial.
X: One-Shot AF
9: AI Focus AF
Z: AI Servo AF
C
78
f: Selecting the AF ModeN
One-Shot AF for Still Subjects
Suited for still subjects. When you
press the shutter button halfway, the
camera will focus only once.
When focus is achieved, the AF point
which achieved focus will flash in red,
and the focus confirmation light <o>
in the viewfinder will also light.
AF point Focus confirmation
With evaluative metering, the
light
exposure setting will be set at the
same time focus is achieved.
While you hold down the shutter button
halfway, the focus will be locked. You
can then recompose the shot if desired.
In the d/s/f/a/F shooting modes, AF is also possible by
pressing the <p> button.
Y
P
O
If focus cannot be achieved, the focus confirmation light <o> in the
viewfinder will blink. If this occurs, a picture cannot be taken even if the
shutter button is pressed completely. Recompose the picture and try to
focus again. Or see “When Autofocus Fails” (p.84).
If the [1 Beep] menu is set to [Off], the beeper will not sound when
focus is achieved.
C
AI Servo AF for Moving Subjects
This AF mode is for moving subjects when
the focusing distance keeps changing. While
you hold down the shutter button halfway,
the subject will be focused continuously.
The exposure is set at the moment
the picture is taken.
In the d/s/f/a/F shooting
modes, AF is also possible by
pressing the <p> button.
79
f: Selecting the AF ModeN
When the AF point selection (p.81) is automatic, the camera first
uses the center AF point to focus. Within the spot metering circle,
there are six invisible Assist AF points („ in diagram) that function in
the AI SERVO AF mode. Therefore, even if the subject moves away
from the center AF point during autofocusing, focusing can still
continue. Also, even if the subject moves far away from the center
AF point, focus tracking continues as long as the subject is covered
by another AF point.
A manually-selected AF point will focus track the subject in the AI
Servo AF mode.
Y
P
O
With AI Servo AF, the beeper will not sound even when focus is achieved.
Also, the focus confirmation light <o> in the viewfinder will not light.
C
AI Focus AF for Automatic Switching of AF Mode
AI Focus AF switches the AF mode
from One-Shot AF to AI Servo AF
automatically if the still subject starts
moving.
After the subject is focused in the
One-Shot AF mode, if the subject
starts moving, the camera will detect
the movement and change the AF
mode automatically to AI Servo AF.
When focus is achieved in the AI Focus AF mode with the Servo mode
active, the beeper will sound softly. However, the focus confirmation light
<o> in the viewfinder will not light.
80
S Selecting the AF PointN
Select one of the nine AF points to autofocus. Manual selection enables
you to select one of the nine AF points. And automatic selection has the
camera automatically select one of the nine AF points.
In the fully-automatic modes (1/C), automatic AF point selection will
be set automatically. You cannot select the AF point.
1
Press the <S> button. (9)
X The selected AF point will be
displayed in the viewfinder and on the
LCD panel.
Y
P
O
the AF point.
2 Select
To select an AF point, you can either
use <9> or turn the <6> or <5>
dial.
Selecting with the Multi-controller
C
The AF point selection will change in
the direction you tilt the <9>.
If you press <9> straight down, the
center AF point will be selected.
If you keep tilting it in the same
direction, it will toggle between
manual and automatic AF point
selection.
When all AF points light up, automatic
AF point selection will be set.
81
S Selecting the AF PointN
Selecting with the Dial
When you turn the <6> or <5>
dial, the AF point selection will
change in the respective direction.
When all AF points light up, automatic
AF point selection will be set.
C
Y
P
O
When looking at the LCD panel to select the AF point, note the following:
Automatic selection
, center
,
right
, top
If focus cannot be achieved with the external, EOS-dedicated Speedlite’s
AF-assist beam, select the center AF point.
82
S Selecting the AF PointN
Lens’ Maximum Aperture and AF Sensitivity
With lenses whose maximum aperture is larger than f/5.6
With the center AF point, cross-type AF (sensitive to both vertical and
horizontal lines) is possible. The remaining eight AF points are
horizontal-line sensitive or vertical-line sensitive.
With lenses whose maximum aperture is larger than f/2.8
With the center AF point, high-precision, cross-type AF sensitive to both
vertical and horizontal lines is possible. The center AF point’s sensitivity
to vertical and horizontal lines is about twice as sensitive as the other
AF points. The remaining eight AF points are horizontal-line sensitive or
vertical-line sensitive.
Y
P
O
* Except with the EF28-80mm f/2.8-4L USM and EF50mm f/2.5 Compact Macro
lenses.
C
The Assist AF points used in the AI Servo AF
mode are within the spot metering circle and not
displayed like normal AF points. They function as
follows:
: Vertical-line sensitive with f/2.8 and f/5.6
lenses, as with the center AF point.
: Horizontal-line sensitive with f/5.6 lenses.
83
When Autofocus Fails
Autofocus can fail to achieve focus (the focus confirmation light <o>
blinks) with certain subjects such as the following:
Subjects difficult to focus
Low-contrast subjects
(Example: Blue sky, solid-color walls, etc.)
Subjects in low light
Extremely backlit or reflective subjects
(Example: Car with a reflective body, etc.)
Near and far subjects covered by an AF point
(Example: Animal in a cage, etc.)
Repetitive patterns
(Example: Skyscraper windows, computer keyboards, etc.)
Y
P
O
In such cases, do one of the following:
(1) With One-Shot AF, focus an object at the same distance as the
subject and lock the focus before recomposing (p.50).
(2) Set the lens focus mode switch to <MF> and focus manually.
C
MF: Manual Focusing
the lens focus mode switch to
1 Set
<MF>.
the subject.
2 Focus
Focus by turning the lens focusing
ring until the subject looks sharp in
the viewfinder.
If you press the shutter button halfway during manual focusing, the active
AF point and the focus confirmation light <o> in the viewfinder will light
when focus is achieved.
84
i Selecting the Drive ModeN
Single and continuous drive modes are provided. In the <1> (Full
Auto) mode, single shooting is set automatically.
1
Press the <o> button. (9)
the drive mode.
2 Select
While looking at the LCD panel, turn
the <5> dial.
Y
P
O
u : Single shooting
When you press the shutter button completely, one shot will be taken.
i : Continuous shooting (Max. 3.9 shots per sec.)
While you press the shutter button completely, shots will be taken
continuously.
Q : 10-sec. self-timer/Remote control
k: 2-sec. self-timer/Remote control
For self-timer shooting, see the next page. For remote control
shooting, see page 102.
C
When the internal buffer memory becomes
full during continuous shooting, “buSY” will
be displayed in the viewfinder and on the
Maximum burst
LCD panel and shooting will be disabled
temporarily. As the captured images are recorded to the card, you will be
able to shoot more images. Press the shutter button halfway to check in
the viewfinder’s bottom right for the current maximum burst. This is the
maximum number of shots that can be taken continuously.
If “FuLL CF” is displayed in the viewfinder and on the LCD panel, wait
until the access lamp stops blinking, then replace the card.
When the battery level is low, the continuous shooting speed will be
slightly slower.
In the AI Servo AF mode, the continuous shooting speed may become
slightly slower depending on the subject and the lens used.
85
j Self-timer Operation
Use the self-timer when you want to be in the picture. The <Q> (10
sec. timer) can be used in all shooting modes.
1 Press the <o> button. (9)
the self-timer.
2 Select
Look at the LCD panel and turn the
<5> dial.
Q : 10-sec. self-timer
k: 2-sec. self-timerN
Y
P
O
the picture.
3 TakeFocus
the subject and press the
C
shutter button completely.
X You can check the self-timer
operation with the self-timer lamp,
beeper, and countdown display (in
seconds) on the LCD panel.
X Two seconds before the picture is
taken, the self-timer lamp will stay on
and the beeper will sound faster.
After taking self-timer shots, you should check the image for proper focus
and exposure (p.128).
If you will not look through the viewfinder when you press the shutter
button, attach the eyepiece cover (p.100). If stray light enters the
viewfinder when you press the shutter button, it may throw off the
exposure.
When using the self-timer to shoot only yourself, use focus lock (p.50) for
an object at about the same distance as where you will be.
To cancel the self-timer after it starts, press the <o> button.
86
5
Advanced Operations
Y
P
O
In the d/s/f/a/F
shooting modes, you can select
the shutter speed, aperture, and
other camera settings to change
the exposure and obtain various
effects.
C
The M icon on the right of the page title indicates that the
function can be used when the Mode Dial is set to <d/s/
f/a/F>.
After you press the shutter button halfway and let go, the
LCD panel and viewfinder information will remain displayed
for about 4 sec. (0).
Functions which can be set in the d/s/f/a/F
shooting modes are listed in “Function Availability Table”
(p.198)
First set the power switch to <J>.
87
d: Program AE
The camera automatically sets the shutter speed and aperture to suit
the subject’s brightness. This is called Program AE.
* <d> stands for Program.
* AE stands for Auto Exposure.
1
Set the Mode Dial to <d>.
the subject.
2 Focus
Look through the viewfinder and aim
C
the selected AF point over the
subject. Then press the shutter button
halfway.
X The AF point which achieves focus
flashes in red, and the focus
confirmation light <o> in the
viewfinder’s bottom right lights (with
One Shot AF + automatic AF point
selection).
X The shutter speed and aperture will
be set automatically and displayed in
the viewfinder and on the LCD panel.
Y
P
O
the shutter speed and
3 Check
aperture display.
A correct exposure will be obtained
as long as the shutter speed and
aperture display do not blink.
the picture.
4 TakeCompose
the shot and press the
shutter button completely.
88
d: Program AE
If the “30"” shutter speed and the maximum aperture
blink, it indicates underexposure.
Increase the ISO speed or use flash.
If the “8000” shutter speed and the minimum aperture
blink, it indicates overexposure.
Lower the ISO speed or use an ND filter (sold
separately) to reduce the amount of light entering the
lens.
Differences Between <d> and <1> (Full Auto)
With <1>, many functions such the AF mode, drive mode, and metering
mode are set automatically to prevent spoiled shots. The functions you can
set are limited. With <d>, only the shutter speed and aperture are set
automatically. You can freely set the AF mode, drive mode, and other
functions.
About Program Shift
Y
P
O
In the Program AE mode, you can freely change the shutter speed and
aperture combination (Program) set by the camera while maintaining the
same exposure. This is called Program shift.
To do this, press the shutter button down halfway, then turn the <6>
dial until the desired shutter speed or aperture value is displayed.
Program shift is canceled automatically after the picture is taken.
Program shift cannot be used with flash.
C
89
s: Shutter-Priority AE
In this mode, you set the shutter speed and the camera automatically
sets the aperture to obtain the correct exposure matching the
brightness of the subject. This is called shutter-priority AE. A faster
shutter speed can freeze the action or moving subject. Or a slower
shutter speed can create a blurred effect, giving the impression of
motion.
* <s> stands for Time value.
Frozen action
(Fast shutter speed)
1
Y
P
O
Blurred motion
(Slow shutter speed)
Set the Mode Dial to <s>.
C
the desired shutter speed.
2 SetWhile
looking at the LCD panel, turn
the <6> dial.
the subject.
3 Focus
Press the shutter button halfway.
X The aperture is set automatically.
4
Check the viewfinder display and
shoot.
As long as the aperture is not
blinking, the exposure will be correct.
90
s: Shutter-Priority AE
If the maximum aperture blinks, it indicates
underexposure.
Turn the <6> dial to set a slower shutter speed until
the aperture stops blinking or set a higher ISO speed.
If the minimum aperture blinks, it indicates
overexposure.
Turn the <6> dial to set a faster shutter speed until
the aperture stops blinking or set a lower ISO speed.
Shutter Speed Display
The shutter speeds from “8000” to “4” indicate the denominator of the
fractional shutter speed. For example, “125” indicates 1/125 sec. Also, “0"5”
indicates 0.5 sec. and “15"” is 15 sec.
C
Y
P
O
91
f: Aperture-Priority AE
In this mode, you set the desired aperture and the camera sets the
shutter speed automatically to obtain the correct exposure suiting the
subject brightness. This is called aperture-priority AE.
A higher f/number (smaller aperture hole) will make more of the
foreground and background fall within acceptable focus. On the other
hand, a lower f/number (larger aperture hole) will make less of the
foreground and background fall within acceptable focus.
* <f> stands for Aperture value (aperture opening).
Y
P
O
Sharp foreground and background
(With a small aperture opening)
1
Blurred background
(With a large aperture opening)
Set the Mode Dial to <f>.
C
the desired aperture.
2 SetWhile
looking at the LCD panel, turn
the <6> dial.
the subject.
3 Focus
Press the shutter button halfway.
X The shutter speed is set automatically.
the viewfinder display and
4 Check
shoot.
As long as the shutter speed is not
blinking, the exposure will be correct.
92
f: Aperture-Priority AE
If the “30"” shutter speed blinks, it indicates
underexposure.
Turn the <6> dial to set a larger aperture (smaller
f/number) until the blinking stops or set a higher ISO
speed.
If the “8000” shutter speed blinks, it indicates
overexposure.
Turn the <6> dial to set a smaller aperture (larger
f/number) until the blinking stops or set a lower ISO
speed.
Y
P
O
Aperture Display
The larger the f/number, the smaller the aperture opening will be. The
apertures displayed will differ depending on the lens. If no lens is attached to
the camera, “00” will be displayed for the aperture.
Depth of Field PreviewN
C
Press the depth-of-field preview button
to stop down the lens to the current
aperture setting. You can check the
depth of field (range of acceptable focus)
through the viewfinder.
A higher f/number will make more of the foreground and background fall
within acceptable focus. However, the viewfinder will look darker.
If the depth of field is difficult to discern, hold down the depth-of-field
preview button while turning the <6> dial.
The exposure will be locked (AE lock) while the depth-of-field preview
button is pressed.
93
a: Manual Exposure
In this mode, you set both the shutter speed and aperture as desired. To
determine the exposure, refer to the exposure level indicator in the
viewfinder or use a commercially-available handheld exposure meter.
This method is called manual exposure.
* <a> stands for Manual.
1
Set the Mode Dial to <a>.
the shutter speed and
2 Set
aperture.
Y
P
O
To set the shutter speed, turn the
<6> dial.
To set the aperture, set the power
switch to <J>, and turn the <5>
dial.
Standard exposure index
Exposure level mark
the subject.
3 Focus
Press the shutter button halfway.
C
X The exposure setting will be
displayed in the viewfinder and on the
LCD panel.
The exposure level mark <s> lets you
see how far you are from the
standard exposure level.
the exposure.
4 SetCheck
the exposure level and set the
desired shutter speed and aperture.
5 Take the picture.
94
q Selecting the Metering ModeN
You can select one of four methods to measure the subject brightness.
In the fully-automatic modes (1/C), evaluative metering is set
automatically.
1
Press the <n> button. (9)
the metering mode.
2 Select
While looking at the LCD panel, turn
Y
P
O
the <6> dial.
q Evaluative metering
This is an all-around metering mode suited for
portraits and even backlit subjects. The camera
sets the exposure automatically to suit the scene.
C
w Partial metering
Effective when the background is much brighter
than the subject due to backlighting, etc. Partial
metering covers about 8% of the viewfinder area at
the center.
r Spot metering
This is for metering a specific part of the subject or
scene. The metering is weighted at the center
covering about 3.5% of the viewfinder area.
e Center-weighted average metering
The metering is weighted at the center and then
averaged for the entire scene.
95
Setting Exposure CompensationN
Exposure compensation is used to alter the standard exposure set by
the camera. You can make the image look brighter (increased
exposure) or darker (decreased exposure). You can set the exposure
compensation up to ±2 stops in 1/3-stop increments.
the Mode Dial to <d>, <s>,
1 Set
or <f>.
the exposure level
2 Check
indicator.
Press the shutter button halfway and
check the exposure level indicator.
Increased exposure for a
brighter image
Decreased exposure for a
darker image
Y
P
O
the exposure compensation
3 Set
amount.
C
Set the power switch to <J>, and
while looking at the viewfinder or LCD
panel, turn the <5> dial.
Turn the <5> dial while pressing the
shutter button halfway or within (0)
after pressing the shutter button halfway.
To cancel the exposure
compensation, set the exposure
compensation amount back to <E>.
4 Take the picture.
If [8C.Fn II -4: Auto Lighting Optimizer] (p.177) is set to a setting other
than [3: Disable], the image may look bright even if a decreased exposure
compensation or flash exposure compensation (p.103, 105) has been set.
The exposure compensation amount will remain in effect even after you
set the power switch to <2>.
Take care not to turn the <5> dial and change the exposure compensation
inadvertently. To prevent this, set the power switch to <1>.
The exposure compensation can also be set with [2 Expo. comp./
AEB] menu (p.97).
96
h Auto Exposure Bracketing (AEB)N
By changing the shutter speed or aperture automatically, the camera
brackets the exposure up to ±2 stops in 1/3-stop increments for three
successive shots. This is called AEB.
* AEB stands for Auto Exposure Bracketing.
1
Select [Expo. comp./AEB].
Under the [2] tab, select [Expo.
comp./AEB], then press <0>.
amount.
2 SetTurnthetheAEB
<6> dial to set the AEB amount.
You can set the exposure compensation
amount with the <5> dial. If AEB is
combined with exposure compensation,
AEB will be applied centering on the
exposure compensation amount.
AEB amount
Press <0> to set the amount.
X When you exit the menu, <h> and the AEB level will be displayed
on the LCD panel.
C
Y
P
O
3 TakeFocustheandpicture.
press the shutter button
completely. The three bracketed shots will
be taken in this sequence: Standard,
decreased, and increased exposure.
Canceling AEB
Follow steps 1 and 2 to turn off the AEB amount display.
AEB will be canceled automatically when you set the power switch
to <2> or when the flash is ready to fire.
If the drive mode is set to <u>, you must press the shutter button three
times. When <i> is set and you hold down the shutter button
completely, three shots will be taken continuously, then the camera will
stop shooting. When <Q> or <k> is set, the three bracketed shots
will be taken after a 10-sec. or 2-sec. delay.
Neither flash nor bulb exposures can be used with AEB.
97
A AE LockN
Use AE lock when the area of focus is to be different from the exposure
metering area or when you want to take multiple shots at the same
exposure setting. Press the <A> button to lock the exposure, then
recompose and take the shot. This is called AE lock. It is effective for
backlit subjects.
1
Focus the subject.
Press the shutter button halfway.
X The exposure setting will be
displayed.
the <A> button. (0)
2 Press
X The <A> icon lights in the viewfinder
Y
P
O
to indicate that the exposure setting is
locked (AE lock).
Each time you press the <A> button,
it locks the current auto exposure
setting.
C
and take the picture.
3 Recompose
If you want to maintain the AE lock
while taking more shots, hold down
the <A> button and press the shutter
button to take another shot.
AE Lock Effects
Metering Mode
(p.95)
q*
wre
AF Point Selection Method (p.81)
Automatic Selection
Manual Selection
AE lock is applied at the AF
AE lock is applied at the
point that achieved focus.
selected AF point.
AE lock is applied at the center AF point.
* When the lens’ focus mode switch is set to <MF>, AE lock is applied at the
center AF point.
98
F: Bulb Exposures
When bulb is set, the shutter stays open while you hold down the shutter
button completely, and closes when you let go of the shutter button. This
is called bulb exposure. Use bulb exposures for night scenes, fireworks,
the heavens, and other subjects requiring long exposures.
1
Set the Mode Dial to <F>.
the desired aperture.
2 SetWhile
looking at the LCD panel, turn the
<6> or <5> dial.
Y
P
O
the picture.
3 TakeWhile
you hold down the shutter
Elapsed exposure time
C
button, the exposure will continue.
X The elapsed exposure time will be
displayed on the LCD panel.
Since bulb exposures produce more noise than usual, the image might
look rough or grainy.
When [8C.Fn II -1: Long exp. noise reduction] is set to [1: Auto] or
[2: On], noise generated by the bulb exposure can be reduced (p.176).
For bulb exposures, using the Remote Switch RS-80N3 or Timer Remote
Controller TC-80N3 (both sold separately) is recommended.
Bulb exposures can also be taken with a remote controller (sold separately, p.102).
When you press the remote controller’s transmit button, the bulb exposure will start
immediately or 2 sec. later. Press the button again to stop the bulb exposure.
U LCD Panel Illumination
Each time you press the <U> button,
the LCD panel illumination will turn on or
off (9). During a bulb exposure,
pressing the shutter button completely
will turn off the LCD panel illumination.
99
F: Bulb Exposures
Using the Eyepiece Cover
If you take a picture without looking at the viewfinder, light entering the
eyepiece can throw off the exposure. To prevent this, use the eyepiece
cover (p.23) attached to the camera strap.
1
Remove the eyecup.
Push the bottom of the eyecup
upward.
Y
P
O
the eyepiece cover.
2 Attaching
Slide the eyepiece cover down into
the eyepiece groove to attach it.
C
Connecting the Remote Switch
You can connect the Remote Switch RS-80N3 or Timer Remote
Controller TC-80N3 (both sold separately) or any EOS accessory
equipped with an N3-type terminal to the camera and shoot with it.
To operate the accessory, refer to its instruction manual.
1 Open the terminal cover.
the plug to the remote
2 Connect
control terminal.
Connect the plug as shown in the
illustration.
To disconnect the plug, grasp the
plug’s silver part and pull out.
100
Mirror LockupN
Although using the self-timer or Remote Switch can prevent camera
shake, using mirror lockup to prevent camera vibrations can also help
when you use a super telephoto lens or shoot close ups.
When [8C.Fn III -6: Mirror lockup] is set to [1: Enable] (p.180),
shooting with mirror lockup will be possible.
1 Focus the subject, press the shutter button completely
and release it.
X The mirror will swing up.
2 Press the shutter button completely again.
Y
P
O
X The picture is taken and the mirror goes back down.
In very bright light such as at the beach or ski slope on a sunny day, take
the picture promptly after mirror lockup.
Do not point the camera toward the sun. The sun’s heat can scorch and
damage the shutter curtains.
If you use bulb exposures, the self-timer, and mirror lockup in
combination, keep pressing the shutter button completely (self-timer
delay time + bulb exposure time). If you let go of the shutter button
during the 10-sec./2-sec. self-timer countdown, there will be a shutterrelease sound. This is not the actual shutter release (no picture is taken).
C
When [1: Enable] is set, single shooting will take effect even if the drive
mode is set to continuous.
When the self-timer is set to <Q> or <k>, the picture will be taken
after 10 sec. or 2 sec. respectively.
The mirror locks up, and after 30 seconds, it will go back down
automatically. Pressing the shutter button completely again locks up the
mirror again.
For mirror lockup shots, using the Remote Switch RS-80N3 or Timer
Remote Controller TC-80N3 (both sold separately) is recommended.
You can also lockup the mirror and shoot with the remote controller (sold
separately, p.102). With Remote Controller RC-1, setting it to a 2-sec.
delay is recommended for shooting.
101
R Remote Control Shooting
RC-1
RC-5
With Remote Controller RC-1 or RC-5 (both
sold separately), you can shoot remotely up
to about 5 meters/16.4 feet from the
camera. RC-1 enables you to shoot
immediately or have a 2-sec. delay, and
RC-5 has a 2-sec. delay.
1 Focus the subject.
the lens focus mode switch to
2 Set
<MF>.
Y
P
O
You can also shoot with <f>.
3 Press the <o> button. (9)
the self-timer.
4 Select
Look at the LCD panel and turn the
C
<5> dial to select <Q> or <k>.
the remote controller’s
5 Press
transmit button.
Remote
control
sensor
Point the remote controller toward the
camera’s remote control sensor and
press the transmit button.
X The self-timer lamp lights and the
picture is taken.
Camera misoperation may occur near certain types of fluorescent lights.
During wireless remote control, try to keep the camera away from
fluorescent light.
102
D Flash Photography
EOS-dedicated, EX-series Speedlites
An EX-series Speedlite (sold separately) makes flash photography as
easy as normal shooting without flash.
For detailed instructions, see the EX-series Speedlite’s instruction
manual. This camera is a Type-A camera that can use all the features
of EX-series Speedlites.
Shoe-mount Speedlites
Y
P
O
Macro Lites
FE Lock
This enables you to attain a proper flash exposure for a specific part
of the subject. Aim the viewfinder center over the subject, then press
the <A> button and take the picture.
Flash Exposure Compensation
In the same way as normal exposure compensation, you can set
exposure compensation for flash. You can set the flash exposure
compensation up to ±2 stops in 1/3-stop increments (with the
camera).
Press the camera’s <m> button, then turn the <5> dial while
looking at the LCD panel or LCD monitor.
C
Using Non-EX-series Canon Speedlites
With an EZ/E/EG/ML/TL-series Speedlite set in the TTL or A-TTL
autoflash mode, the flash can be fired at full output only.
Set the camera’s shooting mode to <a> (manual exposure) or
<f> (aperture-priority AE) and adjust the aperture setting before
shooting.
When using a Speedlite which has manual flash mode, shoot in the
manual flash mode.
103
D Flash Photography
Using Non-Canon Flash Units
Sync Speed
The camera can synchronize with non-Canon compact flash units at 1/
200 sec. and slower speeds. With large studio flash units, since the
flash duration is longer, set the sync speed within 1/60 sec. to 1/30 sec.
Be sure to test the flash synchronization before shooting.
PC Terminal
The camera’s PC terminal can be
used with flash units having a sync
cord. The PC terminal is threaded to
prevent inadvertent disconnection.
The camera’s PC terminal has no
polarity. You can connect any sync
cord regardless of its polarity.
Y
P
O
Cautions for Live View shooting
When using a non-Canon flash unit for Live View shooting, set the [6
Live View/Movie func. set.] menu’s [Silent shoot.] to [Disable]
(p.120). The flash will not fire if it is set to [Mode 1] or [Mode 2].
C
If the camera is used with a flash unit or flash accessory dedicated to
another camera brand, the camera may not operate properly and
malfunction may result.
Do not connect to the camera’s PC terminal any flash unit requiring 250
V or more.
Do not attach a high-voltage flash unit on the camera’s hot shoe. It might
not fire.
A flash unit attached to the camera’s hot shoe and a flash unit connected to
the PC terminal can both be used at the same time.
104
3 Setting the FlashN
When an EX-series Speedlite (such as the 580EX II and 430EX II)
settable by the camera is attached, you can use the camera’s menu
screen to set the Speedlite’s flash function settings and Custom
Functions.
First attach the Speedlite to the camera and turn on the Speedlite.
For details on Speedlite functions, refer to the Speedlite’s instruction
manual.
Flash Function Settings
1
Select [External Speedlite
control].
Y
P
O
Under the [7] tab, select [External
Speedlite control], then press <0>.
[Flash function settings].
2 Select
Turn the <5> dial to select [Flash
function settings], then press <0>.
C
the flash function settings.
3 SetTurn
the <5> dial to select a flash
function and set it as desired. The
procedure is the same as setting a
menu function.
On the screen, the settable items and
what’s displayed will differ depending
on the current flash mode, flash
Custom Function settings, etc.
If you press the <B> button in step 3, you can revert the setting to the
default.
With an EX-series Speedlite not settable with the camera, only [Flash
exp. comp], [E-TTL II], and [Flash firing] are settable for [Flash
function settings].
(For some EX-series Speedlites, [Shutter sync.] is also settable.)
105
3 Setting the FlashN
About E-TTL II
For normal flash exposures, set it to [Evaluative].
If [Average] is set, the flash exposure will be averaged for the entire
metered scene as with an external metering flash. Flash exposure
compensation may be necessary depending on the scene, so this setting is
for advanced users.
Flash C.Fn Settings
1
Select [Flash C.Fn settings].
Y
P
O
Turn the <5> dial to select [Flash
C.Fn settings], then press <0>.
the flash function settings.
2 SetTurn
the <5> dial to select the
C
function number, then set the
function. The procedure is the same
as setting the camera’s Custom
Functions (p.172).
Canceling Speedlite Custom Function Settings
In step 1, select [Clear all Speedlite C.Fn’s] to clear all the Speedlite’s
Custom Function settings (except [C.Fn-0: Distance indicator
display]).
If you use an EX-series Speedlite and the Speedlite Custom Function’s
[Flash metering mode] is set to [TTL (autoflash)], the flash will always be
fired at full output.
106
6
Live View Shooting
and Movies
Y
P
O
You can shoot while viewing the picture on the camera’s LCD
monitor. This is called “Live View shooting.” You can shoot
both still photos and movies.
C
When shooting movies at the 1920x1080 size (Full HD
quality), use a large-capacity card having an actual
reading/writing speed of at least 8 MB/sec.
If you use a card with a slow writing speed when shooting movies
at 1920x1080, the movie might not be recorded properly. Also, if
you playback movies on a card having a slow read/write speed,
movie might not playback properly.
To check the card’s read/write speed, refer to the card
manufacturer’s Web site.
About Remote Live View Shooting
With EOS Utility (provided software) installed in your personal
computer, you can connect the camera to the personal computer
and shoot remotely while viewing the computer screen. For details,
see the Software Instruction Manual in the CD-ROM.
107
A Preparing for Live View ShootingN
This sets the camera for Live View shooting of still photos. To shoot
movies, see page 121.
1
Set the shooting mode.
Select one of the following modes:
d/s/f/a/F.
[Live View/Movie func.
2 Select
set.].
Under the [6] tab, select [Live View/
Movie func. set.], then press <0>.
Y
P
O
[LV func. setting].
3 Select
Turn the <5> dial to select [LV func.
C
setting], then press <0>.
“LV” stands for Live View.
the [Live View function
4 Select
settings] type.
Turn the <5> dial to select [Stills
only], then press <0>.
For details on [Stills+movie], see
page 121.
the [Screen settings] type.
5 Select
Turn the <5> dial to select [Stills
display], then press <0>.
X The screen for step 3 will reappear.
For details about this function, see
the next page.
108
A Preparing for Live View ShootingN
the Live View image.
6 Display
Press the <A> button.
X The Live View image will appear on
the LCD monitor.
Press the <A> button again to turn
off the LCD monitor and quit the Live
View shooting.
About [Screen settings]
Y
P
O
You can select the LCD monitor’s image brightness.
Stills displayh
Geared for still photos, the image is displayed at the standard
brightness to make it easy to see.
Exposure simulationg
Geared for still photos, the Live View image will closely reflect the
brightness level of the image you capture. If you set exposure
compensation, the image brightness will change accordingly.
C
Movie displaye
Geared for movies, the image is displayed at the standard brightness
and the depth of field will be wider than with [Stills display]. The
shooting coverage will also correspond to the proportion of the movierecording size which was set. (The semi-transparent mask on the top,
bottom, left, and right of the screen will not be included in the recorded
movie.) Even when [Movie display] is set, you can take still photos by
pressing the shutter button completely. The shutter speed, aperture,
and ISO speed will be set automatically.
During Live View shooting, do not point the lens toward the sun. The
sun’s heat can damage the camera’s internal components.
Cautions for using Live View shooting are on pages 125-126.
Still and movie shooting are possible even in the fully-automatic modes
(1/C) (p.121).
109
ShootingN
Live View shooting is effective for still subjects whose distance to the
camera does not change. If you handhold the camera and shoot while
viewing the LCD monitor, camera shake can cause blurred images.
Using a tripod is recommended.
1
Use AF to focus.
Press the <p> button.
X The camera will focus with the current
AF mode (p.113).
Y
P
O
the picture.
2 TakePress
the shutter button completely.
C
X The picture will be taken and the
captured image is displayed on the
LCD monitor.
X After the image review ends, the
camera will return to Live View
shooting automatically.
Operations During Live View Display
As with normal shooting through the viewfinder, while the Live View
image is displayed, you can still use the camera buttons to change
settings and playback images.
When you press the <o> or <m> button, the setting
screen will appear on the LCD monitor and you can change the
settings.
During Live View shooting, the metering mode will be set to
evaluative metering regardless of the current metering mode setting.
To check the depth of field for still photos, press the depth-of-field
preview button. The image brightness displayed will be close to the
actual brightness of the resulting image.
During continuous shooting, the exposure set for the first shot will
also be applied to subsequent shots.
110
ShootingN
Pressing the <M> button will display the menu screen so you
can set menu functions. Press the <M> button again to return
to the Live View image. If you select [2 Dust Delete Data],
[6 Sensor cleaning], [7 Clear settings], or [7 Firmware Ver.],
the Live View shooting will be terminated.
Battery Life with Live View Still Photo Shooting
Temperature
At 23°C / 73°F
At 0°C / 32°F
Possible Shots
Approx. 200
Approx. 180
The figures above are based on a fully-charged Battery Pack LP-E6 and CIPA
(Camera & Imaging Products Association) testing standards.
Continuous Live View shooting is possible for about 2 hours at 23°C/73°F or
1 hour and 50 minutes at 0°C/32°F (with fully-charged Battery Pack LP-E6).
C
Y
P
O
The image’s field of view is about 100%.
If the camera is not operated for a prolonged period, the power will turn
off automatically as set with [5 Auto power off] (p.44). If [5 Auto
power off] is set to [Off], the Live View shooting will stop automatically
after 30 min. (camera power remains on).
A grid can be displayed. With the [6 Live View/Movie func. set.]
menu’s [Grid display], you can set either [Grid 1 ] or [Grid 2 ].
With the [6 Live View/Movie func. set.] menu’s [Metering timer], you
can change how long the AE lock’s setting is to be retained.
When you take a picture with flash, the shutter will sound like it took two
shots. However, only one shot will be taken.
With the stereo video cable (provided) or HDMI cable (sold separately),
you can display the Live View image on a TV (p.139-140).
You can also use a remote controller (sold separately, p.102) for Live
View shooting.
111
ShootingN
About the Information Display
Each time you press the <B> button, the information display will change.
White balance
Screen settings
· h: Stills display
· g: Exposure simulation
· e: Movie display
Movie shooting remaining time/Elapsed time
AF point (Quick mode)
Magnifying frame
Histogram
AE lock
Picture Style
AEB
AF mode
·
: Quick mode
·
: Live mode
·
: Live face detection mode
Drive mode
Movie recording size
Image-recording quality
Shutter speed
Aperture
FEB
Flash-ready
Y
P
O
Battery check
Highlight tone priority
ISO speed
Shots remaining
Flash exposure compensation
Exposure level indicator/AEB range
* The display will show only the settings currently applied.
About the <E> icon
C
If Live View shooting is done under direct sunlight or other hot
environments, the <E> icon (warning for the camera’s high internal
temperature) may appear on the screen. If Live View shooting continues
with a high internal temperature, it may degrade image quality. You
should therefore stop Live View shooting if the warning icon appears.
If you use a hard disk-type card and continue Live View shooting while
the <E> warning icon is displayed, the camera’s internal temperature
will further increase and the Live View shooting will then stop
automatically. Live View shooting will be disabled until the camera’s
internal temperature decreases.
The histogram and <g> icon are displayed when [Exposure
simulation] has been set as explained in step 5 on page 108. If <g>
is blinking, it indicates that the Live View image is not being displayed at
the suitable brightness due to low or bright light conditions. However, the
captured image will reflect the exposure setting.
If flash is used or bulb is set, the <g> icon and histogram will be
grayed out (for your reference). The histogram might not be properly
displayed in low light or bright light conditions.
112
Using AF to FocusN
Selecting the AF Mode
The AF modes available are [Quick mode], [Live mode] (p.115), and
[Liveu mode] (face detection) (p.116).
If you want to achieve precise focusing, set the lens focus mode switch
to <MF>, magnify the image, and focus manually (p.119).
Select the AF mode.
Under [6 Live View/Movie func.
set.], select [AF mode].
While the Live View image is
displayed, if you press the
<o> button, you can also
select the AF mode with the <6>
dial.
C
Quick Mode:
Y
P
O
The dedicated AF sensor is used to focus in the One-Shot AF mode
(p.79), using the same AF method as with viewfinder shooting.
Although you can focus the desired area quickly, the Live View image
will be interrupted momentarily during the AF operation.
AF point
1
Display the Live View image.
Press the <A> button.
X The Live View image will appear on
the LCD monitor.
The small box in the screen is the AF
point, and the larger box is the
magnifying frame.
Magnifying frame
113
Using AF to FocusN
the AF point.
2 Select
Press the <o> button, then
use <9> to select the AF point.
If you keep tilting <9> in the same
direction, it will toggle between
manual and automatic AF point
selection.
the subject.
3 Focus
Aim the AF point over the subject,
C
Y
P
O
and hold down the <p> button.
X The Live View image will turn off, the
reflex mirror will go back down, and
AF will be executed.
X When focus is achieved, the beeper
will sound and the Live View image
will reappear.
X The AF point used to focus will be
displayed in red.
the picture.
4 TakeCheck
the focus and exposure, then
press the shutter button to take the
picture (p.110).
You cannot take a picture during autofocusing. Take the picture only
while the Live View image is displayed.
Autofocus will not work with the release button on Remote Switch
RS-80N3 and Timer Remote Controller TC-80N3 (both sold separately).
114
Using AF to FocusN
Live Mode:
The image sensor is used to focus. Although AF is possible with the
Live View image displayed, the AF operation will take longer than
with Quick mode. Also, achieving focus may be more difficult than with
Quick mode.
1
AF point
Display the Live View image.
Press the <A> button.
X The Live View image will appear on
the LCD monitor.
X The AF point < > will appear.
Y
P
O
the AF point.
2 Move
Use <9> to move the AF point to
C
where you want to focus (it cannot go
to the edges of the picture).
If you press <9> straight down, the
AF point will return to the image
center.
the subject.
3 Focus
Aim the AF point over the subject,
and hold down the <p> button.
X When focus is achieved, the AF point
will turn green and the beeper will
sound.
X If focus is not achieved, the AF point
will turn red.
the picture.
4 TakeCheck
the focus and exposure, then
press the shutter button to take the
picture (p.110).
115
Using AF to FocusN
Liveu (Face Detection) Mode:
With the same AF method as the Live mode, the human face is
detected and focused. Have the target person face the camera.
1
Display the Live View image.
Press the <A> button.
X The Live View image will appear on
the LCD monitor.
When a face is detected, the <p>
frame will appear over the face to be
focused.
If multiple faces are detected, <
> will
be displayed. Use the <9> to move the
<
> frame over the target face.
Y
P
O
the subject.
2 Focus
Press the <p> button to focus
C
the face covered by the <p> frame.
X When focus is achieved, the AF point will
turn green and the beeper will sound.
X If focus is not achieved, the AF point
will turn red.
If a face cannot be detected, the < > AF
point will be displayed and the center AF
point will be used for focusing.
the picture.
3 TakeCheck
the focus and exposure, then
press the shutter button to take the
picture (p.110).
116
Using AF to FocusN
If the focus is way off, face detection will not be possible. If the lens
enables manual focusing even while the lens focus switch is set to
<f>, turn the focusing ring to attain rough focus. The face will then be
detected and <p> will be displayed.
An object other than a human face might be detected as a face.
Face detection will not work if the face is very small or large in the
picture, too bright or too dark, titled horizontally or diagonally, or partially
hidden.
The <p> focusing frame might cover only part of the face.
When you press <9> straight down, it will switch to the Live mode
(p.115). You can tilt the <9> to switch to another AF point. If you press
<9> straight down again, it will switch back to Liveu (face detection)
mode.
Since AF is not possible with a face detected near the edge of the
picture, the <p> will be grayed out. Then if you press the <p>
button, the center AF point < > will be used to focus.
C
Y
P
O
Live Mode and Liveu (Face Detection) Mode Notes
AF operation
Focusing will take slightly longer.
Even when focus has been achieved, pressing the <p> button will
focus again.
The image brightness may change during and after the AF operation.
If the image flickers, making it difficult to focus, stop and resume the Live
View shooting under the actual light source to be used. Check that the
flickering has stopped, then autofocus.
If you press the <u> button in the Live mode, the AF point area will be
magnified. If it is difficult to focus in the magnified view, return to the
normal view and autofocus. Note that the AF speed may differ between
the normal and magnified views.
If you autofocus in the Live mode’s normal view and then magnify the
image, the focus might be off.
In the Liveu mode, pressing the <u> button will not magnify the image.
117
Using AF to FocusN
Live Mode and Liveu (Face Detection) Mode Notes
Shooting conditions which can make focusing difficult:
Low-contrast subjects such as the blue sky and solid-color, flat surfaces.
Subjects in low light.
Stripes and other patterns where there is contrast only in the horizontal
direction.
Under a light source whose brightness, color, or pattern keeps changing.
Night scenes or points of light.
Under fluorescent lighting or when the image flickers.
Extremely small subjects.
Subjects at the edge of the picture.
Subjects strongly reflecting light.
The AF point covers both a near and faraway subject (such as an animal
in a cage).
Subjects which keep moving within the AF point and cannot keep still
due to camera shake or subject blur.
A subject approaching or moving away from the camera.
Autofocusing while the subject is way out of focus.
Soft focus effect is applied with a soft focus lens.
A special effects filter is used.
C
Y
P
O
In the Live mode or Liveu (face detection) mode, if you want to shoot a
peripheral subject and the target subject is not in focus, aim the center
AF point over the subject to focus, then take the picture.
The external Speedlite will not emit the AF-assist beam.
Autofocus will not work with the release button on Remote Switch RS80N3 and Timer Remote Controller TC-80N3 (both sold separately).
118
Focusing ManuallyN
You can magnify the image and focus precisely manually.
1
Set the lens focus mode switch to
<MF>.
Turn the lens focusing ring to focus
roughly.
the magnifying frame.
2 Moving
Use <9> to move the magnifying
frame to the position where you want
to focus.
If you press <9> straight down, the
magnifying frame will return to the
image center.
Magnifying frame
Y
P
O
the image.
3 Magnify
Press the <u> button.
C
X The image within the magnifying
frame will be magnified.
Each time you press the <u> button,
the view will change as follows:
5x
10x
Normal view
manually.
4 Focus
While looking at the magnified image,
AE lock
Magnified area position
Magnification
turn the lens focusing ring to focus.
After achieving focus, press the <u>
button to return to the normal view.
the picture.
5 TakeCheck
the focus and exposure, then
press the shutter button to take the
picture (p.110).
119
Silent ShootingN
Below are instructions for setting the [6
Live View/Movie func. set.] menu’s [Silent
shoot.].
Mode 1
The shooting operation noise is quieter than with normal shooting
through the viewfinder. When you set the drive mode to <i>, you
can shoot continuously at approx. 3 fps.
Y
P
O
Mode 2
When you press the shutter button completely, only one shot will be
taken. While you keep holding down the shutter button, the camera
operation will be suspended. Then when you return to the shutter
button’s halfway position, the camera operation will resume. The
shooting noise is thereby minimized. Even if the current drive mode
is set to continuous, only a single shot will be taken.
C
Disable
If you use a TS-E lens to make vertical shift movements or use an
Extension Tube, be sure to set this to [Disable]. Setting it to [Mode
1] or [Mode 2] will result in incorrect or irregular exposures.
When you press the shutter button completely, the shutter will sound
like it took two shots. However, only one shot will be taken.
If you use flash, the [Disable] operation will take effect even if you had
set it to [Mode 1] or [Mode 2].
When using a non-Canon flash unit, set it to [Disable]. The flash will not
fire if it is set to [Mode 1] or [Mode 2].
If [Mode 2] is set and you use a remote controller (p.102) to shoot, the
operation will be the same as with [Mode 1].
120
k Shooting Movies
You can shoot movies in all shooting modes. Also, during the Live View
image display or movie shooting, you can take still photos by pressing
the shutter button completely. Playing back the movie on a TV set
connected to the camera is recommended (p.139-140).
1
Select [6 Live View/Movie func.
set.].
The menu procedure is the same as
on page 108.
Y
P
O
movie shooting.
2 Enable
Fully-Automatic Modes (1/C)
Select [Movie recording] and set it to
[Enable].
C
d/s/f/a/F Modes
Select [LV func. setting].
Select [Stills+movie], then select
[Movie display].
the movie recording size.
3 SetSelect
[Movie rec. size] and set the
size.
• [1920x1080]
Full HD (Full High-Definition)
quality
• [640x480]
4:3 standard quality
121
k Shooting Movies
the Live View image.
4 Display
Press the <A> button.
X The image matching the [Screen
settings] (p.109) setting is displayed
on the LCD monitor.
the subject.
5 Focus
Before shooting a movie, focus with
AF or manual focus (p.113-119).
o: Shooting movie
6
Start shooting the movie.
Y
P
O
Press <0> to start shooting the movie.
While the movie is being shot, the “o”
mark will be displayed on the upper right
of the screen.
shooting the movie.
7 StopPress
<0> again.
C
Movie Shooting Time
With a 4GB card, you can shoot a movie in [1920x1080] for about 12
min. At [640x480], about 24 min. (Based on Canon’s testing
standards.)
You can shoot movies up to about 90 min. total at 23°C/73°F. Or up to about
80 min. total at 0°C/32°F (with a fully-charged Battery Pack LP-E6).
About the Screen
During movie shooting, the top, bottom, left, and right parts of the screen will
have a semi-transparent mask. The area enclosed by the semi-transparent
mask will be the movie image that is recorded. The semi-transparent mask
size will change depending on the [Movie rec. size] setting (p.121).
In the fully-automatic modes (1/C), the movie shooting screen
will always be displayed.
In the d/s/f/a/F modes, if [LV func. setting] is set to
[Stills+movie], you can still shoot movies by pressing <0> even if [Screen
settings] has been set to [Stills display] or [Exposure simulation].
122
k Shooting Movies
Taking Still Photos During Movie Shooting
You can take a still photo at anytime by pressing the shutter button
completely, even during movie shooting. The shutter speed and aperture are
set automatically. The ISO speed is also set automatically within ISO 100 - 3200.
The still photo will cover the entire screen including the semi-transparent mask.
If you take a still photo during movie shooting, the movie will record a still photo
for about 1 sec. The captured still photo will be recorded to the card, and when
the Live View image is displayed, the movie shooting will resume automatically.
One movie file and the still photo file(s) will be recorded to the card.
Y
P
O
Notes on Movie Shooting
Recording and Image Quality
After you start shooting a movie, the movie shooting will stop automatically if
the file size reaches 4 GB or if the movie time exceeds 29 min. 59 sec.
For movie shooting, the ISO speed is set automatically. ISO 100 is set as standard, then
it can increase up to ISO 6400 (expandable to H1: 12800) for low-light conditions.
If the attached lens has an Image Stabilizer, the Image Stabilizer will
operate at all times even if you do not press the shutter button halfway.
The Image Stabilizer may cause the total movie shooting time or the
number of possible shots to decrease. If you use a tripod or if the Image
Stabilizer is not necessary, you should set the IS switch to <2>.
The camera’s built-in microphone will also record the operation noise of the
Image Stabilizer, AF motor, and in-focus beeper. Also, if you operate the
camera’s dial or lens during movie shooting, the respective operation noise
will also be recorded. If you use a commercially-available external
microphone, you can prevent (or reduce) these noises from being recorded.
Autofocusing during movie shooting is not recommended since it might
momentarily throw the focus way off or change the exposure. If the AF
mode has been set to [Quick mode], AF is not possible even if you
press the <p> button during movie shooting.
If [Screen settings] has been set to [Stills display] or [Exposure
simulation], the start of the movie shooting might momentarily record a
substantial exposure change.
C
Operation
External flash cannot fire for still photos taken during movie shooting.
If [Screen settings] has been set to [Movie display], the depth-of-field
preview button will not work.
123
k Shooting Movies
Notes on Movie Shooting
Playback and Connection to TV
If the brightness suddenly changes greatly during movie shooting, that
part might look momentarily still when you playback the movie.
If you connect the camera to a TV set with an HDMI cable (p.140) and
display the Live View image while shooting a movie at [1920x1080], the
image displayed on the TV set will be small. However, the movie itself
will be recorded in the [1920x1080] size as set.
If you connect the camera to a TV set (p.139-140) and display the Live View
image while shooting a movie, the TV will not output the sound. (The sound will
be properly recorded, but the camera will not output the sound to the TV set.)
Y
P
O
If you use a card having a slow writing speed, the five-level indicator
on the right might appear during movie shooting. It indicates how
much data has not yet been written to the card (remaining capacity of
the internal buffer memory). The slower the card, the faster the
indicator will climb upward. If the indicator becomes full, movie
shooting will stop automatically. If the card has a fast writing speed,
the indicator will either not appear or the level will hardly go upward.
First, shoot a few test movies to see if the card can write fast enough.
C
Indicator
Recording and Image Quality
The movie will be recorded in the MOV format.
The movie will be recorded in the Picture Style currently set.
The movie will be recorded in the sRGB-equivalent color space
optimized for movies.
Exposure
With [Screen settings] set to [Movie display] or during movie shooting,
you can adjust the image brightness (exposure compensation) by setting
the power switch to <J> and turning the <5> dial (except in 1/C
modes).
During movie shooting, you can lock the exposure (AE lock) by pressing
the <A> button. To cancel the AE lock, press the <S> button. (The
metering timer will not operate.)
Center-weighted average metering will be used for movie shooting. If the
AF mode is set to [Liveu (Face detection) mode], the exposure control
will be evaluative metering linked to the detected face.
124
About Sound
The sound is recorded in monaural by the camera’s built-in microphone
(p.16).
Stereo sound recording is possible by connecting an external
microphone equipped with a stereo mini plug (3.5mm dia.) to the
camera’s external microphone IN terminal (p.16).
The sound recording level will be adjusted automatically.
Display and Operating the Camera
The shutter speed and aperture displayed in the Live View screen when
the shutter button is pressed halfway are for shooting still photos.
If you take still photos during movie shooting while drive mode is set to
<Q> or <k>, <u> (single shooting) will take effect automatically.
You can use Remote Controller RC-1/RC-5 (sold separately, p.102) to
start and stop the movie shooting. With RC-1, set the timing switch to
<2> (2-sec. delay), then press the transmit button. If the switch is set to
<o> (immediate shooting), still photo shooting will take effect.
If the movie shooting is not possible due to the insufficient remaining
capacity of the card. movie recording size and movie shooting remaining
time (p.112) will be displayed in red.
C
Y
P
O
Live View Shooting Cautions for Stills and Movies
Notes About the Live View Image
Under low light or bright light conditions, the Live View image might not
reflect the brightness of the captured image. However, for movies, the
movie image displayed will be recorded in almost the same way you see
it on the LCD monitor.
If the light source within the image changes, the screen might flicker. If
this happens, stop and resume the Live View shooting under the actual
light source to be used.
If you point the camera in a different direction, it might throw off the Live
View image’s correct brightness momentarily. Wait until the brightness
level stabilizes before shooting.
If there is a very bright light source in the picture, such as the sun, the bright
area might appear black on the LCD monitor. In still photos, such bright
areas will be recorded properly as a bright area. In movies, the bright areas
will be recorded in almost the same way you see it on the LCD monitor.
125
Live View Shooting Cautions for Stills and Movies
Notes About the Live View Image
Under low light, the Live View image might show chrominance noise. In
still photos, chrominance noise is not recorded. However, in movies, it
will be recorded in almost the same way you see it on the LCD monitor.
When you magnify the image, the image sharpness may look more
pronounced than it really is.
Notes About the Shooting Results
When you shoot continuously with Live View function for a long period,
the camera’s internal temperature may increase and it can degrade
image quality. Terminate Live View shooting when not shooting images.
Before taking a long exposure or shooting a movie, stop Live View
shooting temporarily and wait several minutes before shooting. This is to
prevent image degradation.
Live View shooting in high temperatures and at high ISO speeds may
cause noise or irregular colors.
If you shoot still photos at a high ISO speed or shoot a movie in low light,
horizontal stripes may become noticeable as noise.
If you take the picture while the image is magnified, the exposure might
not come out as desired. Return to the normal view before taking the
picture. During the magnified view, the shutter speed and aperture will be
displayed in red. Even if you take the picture during magnified view, the
captured image will show the normal view.
C
Y
P
O
Custom Function Notes
Live View shooting will disable certain Custom Function settings (p.173).
If [8C.Fn II -4: Auto Lighting Optimizer] (p.177) is set to anything
other than [3: Disable], the image may look bright even if a decreased
exposure compensation or flash exposure compensation has been set.
Notes about lenses and flash
The focus preset feature on super telephoto lenses cannot be used.
With an external Speedlite, FE lock, modeling flash, and test flash cannot
be used.
126
7
Image Playback
Y
P
O
This chapter explains how to playback and erase
photos and movies, how to display images on a TV
screen, and other playback-related functions.
C
About images taken with another camera:
The camera might not be able to properly display images captured
with a different camera or edited with a personal computer or whose
file name was changed.
127
x Image Playback
Single Image Display
1
Playback the image.
Press the <x> button.
X The last captured image or last image
viewed will appear.
the image.
2 Select
To playback images starting with the
last image, turn the <5> dial
counterclockwise. To playback
images starting with the first captured
image, turn the dial clockwise.
Press the <B> button to change
the display format.
C
Single image display
Histogram display
Y
P
O
Single image display +
Image-recording quality
Shooting information display
the image playback.
3 ExitPress
the <x> button to exit the
image playback and return the
camera to shooting ready.
128
x Image Playback
B Shooting Information Display
Protect
Exposure compensation amount
Flash exposure
compensation amount
Aperture
AF Microadjustment
Folder number - File number
Card
Histogram
(Brightness/RGB)
Shutter speed/
Recording time
Picture Style and
settings
Metering mode
Shooting mode/
Movie
Color temperature if
<P> is set
Image-recording
quality/Movierecording size
Playback number/
Total images recorded
Y
P
O
ISO speed
Highlight tone priority
Color space
Date and time
Original decision (image
verification) data appended
C
White balance
File size
White balance correction
* When you shoot in the RAW+JPEG mode, the JPEG image file size will be
displayed.
About the Highlight Alert
When the [4 Highlight alert] menu is set to [Enable], overexposed
highlight areas will blink. To obtain more image detail in the
overexposed areas, set the exposure compensation to a negative
amount and shoot again.
About the AF Point Display
When the [4 AF point disp.] menu is set to [Enable], the AF point
which achieved focus will be displayed in red. If automatic AF point
selection was used, multiple AF points might be displayed in red.
129
x Image Playback
About the Histogram
The brightness histogram display shows the exposure level
distribution and overall brightness. The RGB histogram display is for
checking the color saturation and gradation. The display can be
switched with the [4 Histogram] menu.
[Brightness] Display
Sample Histograms
This histogram is a graph showing the
distribution of the image’s brightness level. The
horizontal axis indicates the brightness level
Dark image
(darker on the left and brighter on the right),
while the vertical axis indicates how many
pixels exist for each brightness level. The more
pixels there are toward the left, the darker the
Normal brightness
image. And the more pixels there are toward the
right, the brighter the image. If there are too
many pixels on the left, the shadow detail will be
Bright image
lost. And if there are too many pixels on the
right, the highlight detail will be lost. The
gradation in-between will be reproduced. By checking the image and
its brightness histogram, you can see the exposure level inclination
and the overall tone reproduction.
C
Y
P
O
[RGB] Display
This histogram is a graph showing the distribution of each primary
color’s brightness level in the image (RGB or red, green, and blue). The
horizontal axis indicates the color’s brightness level (darker on the left
and brighter on the right), while the vertical axis indicates how many
pixels exist for each color brightness level. The more pixels there are
toward the left, the darker and less prominent the color. And the more
pixels there are toward the right, the brighter and denser the color. If
there are too many pixels on the left, the respective color information will
be lacking. And if there are too many pixels on the right, the color will be
too saturated with no detail. By checking the image’s RGB histogram,
you can see the color’s saturation and gradation condition and white
balance inclination.
130
x Searching for Images Quickly
H Display Multiple Images on One Screen (Index display)
Search for images quickly with the index display showing four or nine
images on one screen.
1
Î
Turn on the index display.
During image playback, press the
<I> button.
X The 4-image index display will
appear. The currently-selected image
will be highlighted in a blue frame.
Press the <I> button again to
switch to the 9-image index display.
Y
P
O
Î
C
the image.
2 Select
When you turn the <6> dial, you
can browse the images as set with
[4 Image jump w/6] (p.132).
Turn the <5> dial to move the blue
frame to select the image.
Press the <u> button to display the
selected image in the normal view.
(9 images → 4 images → 1 image)
131
x Searching for Images Quickly
I Jump through Images (Jump display)
With the single image display, index display, and magnified view, you
can turn the <6> dial to jump through the images.
1
Select the jump method.
C
In the [4 Image jump w/6] menu,
select the desired jump method from
[1 image/10 images/100 images/
Screen/Date/Folder/Movies/Stills],
then press <0>.
With the index display, you can jump
by a single screen by selecting
[Screen].
If you want to jump by date, select
[Date]. To jump by folder, select
[Folder].
Y
P
O
by jumping.
2 Browse
Press the <x> button to playback
Jump method
Image location
132
the image.
Turn the <6> dial.
X The jump display will proceed
according to the selected jump
method.
X On the bottom right, the jump method
and current image location are
indicated.
u/y Magnified View
You can magnify the image by 1.5x to 10x on the LCD monitor.
1
Magnified area position
Magnify the image.
During image playback, press the
<u> button.
X The image will be magnified.
To increase the magnification, hold
down the <u> button. The image will
continue to be magnified until it
reaches the maximum magnification.
Press the <I> button to reduce
the magnification. If you hold down
the button, the image will continue to
reduce to the single image display.
Y
P
O
around the image.
2 Scroll
Use <9> to scroll around the
C
magnified image.
To exit the magnified display, press
the <x> button and the singleimage display will return.
During the magnified view, you can turn the <5> (or <6>) dial to view
another image at the same magnification and position (the display jumps
according to the selected jump method).
Magnified view is not possible during the image review immediately after
the image is taken.
The movie image cannot be magnified.
133
b Rotating the Image
You can rotate the displayed image to the desired orientation.
1
Select [Rotate].
Under the [3] tab, select [Rotate],
then press <0>.
the image.
2 Select
Turn the <5> dial to select the
Y
P
O
image to be rotated.
You can also select an image on the
index display.
the image.
3 Rotate
Each time you press <0>, the
C
image will rotate clockwise as follows:
90° → 270° → 0°
To rotate another image, repeat steps
2 and 3.
To exit and return to the menu, press
the <M> button.
If you have set [5 Auto rotate] to [OnzD] (p.146) before taking
vertical shots, you need not rotate the image as described above.
If the rotated image is not displayed in the rotated orientation during
image playback, set the [5 Auto rotate] menu to [OnzD].
A movie cannot be rotated.
134
3 Auto Playback (Slide Show)
You can playback the images in the card as an automatic slide show.
1
Quantity of images for playback
Select [Slide show].
Under the [4] tab, select [Slide
show], then press <0>.
the images to be played
2 Select
back.
Turn the <5> dial to select the item,
then press <0>.
Y
P
O
[All images/Movies/Stills]
Turn the <5> dial to select one of
the following: [jAll images/
kMovies/zStills]. Then press
<0>.
C
Item
[Folder/Date]
Turn the <5> dial to select either
[nFolder] or [iDate].
When <z > is displayed
brightly, press the <B> button.
Turn the <5> dial to select the folder
or date, then press <0>.
Playback Images
jAll images
All the still photos and movies in the card will be played back.
nFolder
Still photos and movies in the selected folder will be played
back.
iDate
Still photos and movies taken on the selected shooting date will
be played back.
kMovies
zStills
Only the movies in the card will be played back.
Only the still photos in the card will be played back.
135
3 Auto Playback (Slide Show)
the playback time and repeat
3 Set
option.
Turn the <5> dial to select [Set up],
then press <0>.
For still photos, set the [Play time]
and [Repeat] options, then press the
<M> button.
[Play time]
[Repeat]
Y
P
O
show.
4 StartTurnthetheslide
<5> dial to select [Start],
C
then press <0>.
X After [Loading image...] is displayed
for a few seconds, the slide show will
start.
To pause the slide show, press <0>.
During pause, [ ] will be displayed
on the upper left of the image. Press
<0> again to resume the slide
show.
slide show.
5 QuitTo the
quit the slide show and return to
the setting screen, press the
<M> button.
During pause, you can turn the <5> or <6> dial to view another
image.
During the slide show, auto power off will not work.
The display time may vary depending on the image.
To view the slide show on a TV set, see page 139-140.
136
k Playing Movies
1
Playback the image.
Press the <x> button to display the
image.
a movie.
2 Select
Turn the <5> dial to select the image.
During the single-image display, the
<1s> icon displayed on the
upper left indicates that it is a movie.
During the index display, the perforation
on the left edge of the image indicates
that it is a movie. Movies cannot be
played from the index display. Press
the <u> button to switch to the
single-image display.
Y
P
O
<0>.
3 Press
On the single-image display, press <0>.
C
X The movie playback panel will appear
on the bottom.
the movie.
4 Playback
Turn the <5> dial to select [7]
Speaker
(play), then press <0>.
X The movie playback will start.
You can pause the movie playback by
pressing <0>.
During movie playback, you can
adjust the sound volume by turning
the <6> dial.
For more details on the playback
procedure, see the next page.
137
k Playing Movies
Item
Playback Description
2 Exit
7 Play
Returns to the single-image display.
8 Slow motion
Adjust the slow motion speed by turning the <5> dial. The
slow-motion speed is indicated on the upper right.
5 First frame
Displays the movie’s first frame.
3 Previous frame
Each time you press <0>, a single previous frame is
displayed. If you hold down <0>, it will rewind the movie.
6 Next frame
Each time you press <0>, the movie will play frame-byframe. If you hold down <0>, it will fast forward the
movie.
4 Last frame
Displays the movie’s last frame.
Pressing <0> toggles between play and stop.
Y
P
O
Playback position
mm’ SS”
Volume
Playback time
Turn the <6> dial to adjust the volume of the camera’s
built-in speaker (p.17).
C
Press the <B> button to switch the information display.
If you took a still photo when you shot the movie, the still photo will be
displayed for about 1 sec. during the movie playback.
If you connect the camera to a TV set (p.139-140) to playback a movie,
adjust the sound volume with the TV set. (Turning the <6> dial will not
adjust the sound volume.)
Movies cannot be edited with the camera. With ZoomBrowser EX/
ImageBrowser (provided software), you can edit out the unnecessary
beginning or ending parts of the movie.
138
Viewing the Images on TV
You can also view the still photos and movies on a TV set. Before
connecting or disconnecting the cable between the camera and
television, turn off the camera and television.
* Adjust the movie’s sound volume with the TV set.
* Depending on the TV set, part of the image displayed might be cut off.
Viewing on Non-HD (High-Definition) TV Sets
1
Connect the provided stereo
video cable to the camera.
Connect the stereo video cable to the
camera’s <q> terminal. Insert
the cable plug all the way in.
(Red)
(White)
Y
P
O
the video cable to the TV
2 Connect
set.
(Yellow)
C
Connect the stereo video cable to the
TV’s video IN terminal and to the
audio IN terminal.
on the TV and switch the
3 Turn
TV’s video input to select the
connected terminal.
the camera’s power switch to
4 Set
<1>.
the <x> button.
5 Press
X The image will appear on the TV
screen. (Nothing will be displayed on
the camera’s LCD monitor.)
To playback the movie, see page 137.
If the video system format does not match the TV’s, the images will not be
displayed properly. Set the proper video system format with [6 Video system].
Do not use any stereo video cable other than the one provided. Images
might not be displayed if you use a different video cable.
139
Viewing the Images on TV
Viewing on HD (High-Definition) TV Sets
The HDMI Cable HTC-100 (sold separately) is required.
1
Connect the HDMI cable to the
camera.
Connect the HDMI cable to the
camera’s <D> terminal.
With the plug’s <dHDMI MINI> logo
facing the front of the camera, insert it into
the camera’s <D> terminal.
Y
P
O
the HDMI cable to the TV set.
2 Connect
Connect the HDMI cable to the TV’s
HDMI IN port.
on the TV and switch the
3 Turn
TV’s video input to select the
connected port.
C
the camera’s power switch to
4 Set
<1>.
the <x> button.
5 Press
X The image will appear on the TV
* By pressing the <B>
button, you can change
the display format.
screen. (Nothing will be displayed on
the camera’s LCD monitor.)
The images will be displayed automatically
at the TV’s optimum resolution.
To playback movies, see page 137.
Do not connect any other device to the camera’s <D>
terminal. Doing so may cause a malfunction.
Some TVs might not be able to display the captured images. In such a
case, use the provided stereo video cable to connect to the TV.
The camera’s <q> terminal and <D> terminal cannot
be used at the same time.
140
K Protecting Images
Protecting the image prevents it from being erased accidentally.
1
Image protect icon
Select [Protect images].
Under the [3] tab, select [Protect
images], then press <0>.
X The protect setting screen will
appear.
the image and protect it.
2 Select
Turn the <5> dial to select the
C
Y
P
O
image to be protected, then press
<0>.
X When an image is protected, the
<K> icon will appear on the screen.
To cancel the image protection, press
<0> again. The <K> icon will
disappear.
To protect another image, repeat step
2.
To exit the image protection, press
the <M> button. The menu will
reappear.
If you format the card (p.43), the protected images will also be erased.
Once an image is protected, it cannot be erased by the camera’s erase
function. To erase a protected image, you must first cancel the
protection.
If you erase all the images (p.143), only the protected images will
remain. This is convenient when you want to erase unnecessary images
all at once.
141
L Erasing Images
You can either select and erase images one by one or erase them in
one batch. Protected images (p.141) will not be erased.
Once an image is erased, it cannot be recovered. Make sure
you no longer need the image before erasing it. To prevent
important images from being erased accidentally, protect it.
Erasing a Single Image
1 Playback the image to be erased.
the <L> button.
2 Press
X The erase menu will appear at the
Y
P
O
bottom of the screen.
the image.
3 Erase
Turn the <5> dial to select [Erase],
C
then press <0>. The image
displayed will be erased.
3 Checkmarking <X> Images to be Erased in a Batch
By checkmarking the images to be erased, you can erase multiple
images at one time.
1
142
Select [Erase images].
Under the [3] tab, select [Erase
images], then press <0>.
L Erasing Images
[Select and erase images].
2 Select
Turn the <5> dial to select [Select
and erase images], then press
<0>.
X An image will appear.
Press the <I> button to display
the three-image view. To return to the
single-image display, press the <u>
button.
the image to be erased.
3 Select
Turn the <5> dial to select the
C
Y
P
O
image to be erased, then press
<0>.
X The <X> icon will be displayed on
the upper left.
To erase another image, repeat step
3.
the image.
4 Erase
Press the <L> button.
Turn the <5> dial to select [OK],
then press <0>.
X The selected image will be erased.
3 Erasing All Images in a Folder or Card
You can erase all the images in a folder or card at one time. When the
[3 Erase images] menu is set to [All images in folder] or [All images
on card], all the images in the folder or card will be erased.
143
Changing Image Playback Settings
3 Adjusting the LCD Monitor Brightness
The LCD monitor’s brightness is adjusted automatically for optimum
viewing. You can set the automatic adjustment’s brightness level
(brighter or darker) or adjust the brightness manually.
1
Select [LCD brightness].
Under the [6] tab, select [LCD
brightness], then press <0>.
[Auto] or [Manual].
2 Select
Turn the <6> dial to make the
Y
P
O
selection.
3
C
Automatic adjustment
Adjust the brightness.
While referring to the gray chart, turn
the <5> dial, then press <0>.
You can adjust [Auto] to one of three
levels, and [Manual] to one of seven
levels.
Manual adjustment
While [Auto] is set, be careful not to obstruct the round, external light
sensor (left of the power switch) with your finger, etc.
To check the image’s exposure, you should look at the histogram
(p.130).
144
Changing Image Playback Settings
3 Setting the Image Review Time
You can set how long the image is displayed on the LCD monitor
immediately after capture. To keep the image displayed, set [Hold]. To
not have the image displayed, set [Off].
1
Select [Review time].
Under the [1] tab, select [Review
time], then press <0>.
the desired time.
2 SetTurn
the <5> dial to select the
Y
P
O
setting, then press <0>.
C
If [Hold] is set, the image will be displayed until the auto power off time
elapses.
145
Changing Image Playback Settings
3 Auto Rotate of Vertical Images
Vertical images are rotated automatically so they
are displayed vertically on the camera’s LCD
monitor and personal computer instead of
horizontally. The setting of this feature can be
changed.
1
Select [Auto rotate].
Under the [5] tab, select [Auto
rotate], then press <0>.
Y
P
O
the auto rotate.
2 SetTurn
the <5> dial to select the
setting, then press <0>.
OnzD
The vertical image is automatically rotated on both the camera’s
LCD monitor and on the personal computer.
OnD
The vertical image is automatically rotated only on the personal
computer.
Off
The vertical image is not rotated.
C
Auto rotate will not work with vertical images captured while Auto rotate was
[Off]. They will not rotate even if you later switch it to [On] for playback.
Immediately after image capture, the vertical image will not be
automatically rotated for the image review.
If the vertical image is taken while the camera is pointed up or down, the
image might not rotate automatically for playback.
If the vertical image is not automatically rotated on the personal
computer screen, it means the software you are using is unable to rotate
the image. Using the provided software is recommended.
146
8
Sensor Cleaning
Y
P
O
The camera has a Self Cleaning Sensor Unit attached
to the image sensor’s front layer (low-pass filter) to
shake off dust automatically.
The Dust Delete Data can also be appended to the
image so that the dust spots remaining can be erased
automatically by Digital Photo Professional (provided
software).
C
Minimizing Dust
When changing lenses, do it in a place with minimal dust.
When storing the camera without a lens attached, be sure to
attach the body cap to the camera.
Remove dust on the body cap before attaching it.
Even while the Self Cleaning Sensor Unit is operating, you can
press the shutter button halfway to interrupt the cleaning and start
shooting immediately.
147
f Automatic Sensor Cleaning
Whenever you set the power switch to <1/J> or <2>, the Self
Cleaning Sensor Unit operates to automatically shake off the dust on
the front of the sensor. Normally, you need not be aware of this
operation. However, you can execute the sensor cleaning at anytime as
well as disable it.
Cleaning the Sensor Now
1
Select [Sensor cleaning].
Under the [6] tab, select [Sensor
cleaning], then press <0>.
Y
P
O
[Clean nowf].
2 Select
Turn the <5> dial to select [Clean
C
nowf], then press <0>.
Select [OK], then press <0>.
X The screen will indicate that the
sensor is being cleaned. Although
there will be a shutter sound, a
picture is not taken.
For best results, do the sensor cleaning while the camera bottom is
placed on a table or other flat surface.
Even if you repeat the sensor cleaning, the result will not improve that
much. Right after the sensor cleaning is finished, the [Clean nowf]
option will remain disabled temporarily.
Disabling Automatic Sensor Cleaning
In step 2, select [Auto cleaningf] and set it to [Disable].
X The sensor cleaning will no longer be executed when you set the
power switch to <1/J> or <2>.
148
3 Appending Dust Delete DataN
Normally, the Self Cleaning Sensor Unit will eliminate most of the dust
that might be visible on captured images. However, in case visible dust
still remains, you can append the Dust Delete Data to the image to later
erase the dust spots. The Dust Delete Data is used by Digital Photo
Professional (provided software) to erase the dust spots automatically.
Preparation
Get a solid-white object (paper, etc.).
Set the lens focal length to 50mm or longer.
Set the lens focus mode switch to <MF> and set the focus to infinity
(∞). If the lens has no distance scale, look at the front of the lens
and turn the focusing ring clockwise all the way.
Y
P
O
Obtain the Dust Delete Data
1
C
Select [Dust Delete Data].
Under the [2] tab, select [Dust
Delete Data], then press <0>.
[OK].
2 Select
Turn the <5> dial to select [OK],
then press <0>. After the automatic
sensor cleaning ends, a message will
appear. Although there will be a
shutter sound, a picture is not taken.
149
3 Appending Dust Delete DataN
a solid-white object.
3 Photograph
At a distance of 20 cm - 30 cm /
0.7 ft. - 1.0 ft., fill the viewfinder with a
patternless, solid-white object and
take a picture.
X The picture will be taken in the aperturepriority AE mode with an aperture of f/22.
Since the image will not be saved, the
data can still be obtained even if there
is no card in the camera.
X When the picture is taken, the camera
will start obtaining the Dust Delete
Data. When the Dust Delete Data is
obtained, a message will appear.
Select [OK], and the menu will
reappear.
C
Y
P
O
If the data was not obtained
successfully, a message to that effect
will appear. Follow the “Preparation”
procedure on the preceding page, then
select [OK]. Take the picture again.
About the Dust Delete Data
After the Dust Delete Data is obtained, it is appended to all the JPEG
and RAW images captured thereafter. Before an important shoot, you
should update the Dust Delete Data by obtaining it again.
To erase dust spots automatically with the bundled software, see the
Software Instruction Manual in the CD-ROM.
The Dust Delete Data appended to the image is so small that it hardly
affects the image file size.
Be sure to use a solid-white object such as a new sheet of white paper. If the
paper has any pattern or design, it may be recognized as dust data and
affect the accuracy of the dust deletion with the software.
150
3 Manual Sensor CleaningN
Dust which could not be removed by the automatic sensor cleaning can
be removed manually with a blower, etc.
The surface of the image sensor is extremely delicate. If the
sensor needs to be cleaned directly, having it done by a Canon
Service Center is recommended.
Before cleaning the sensor, detach the lens from the camera.
1
Select [Sensor cleaning].
Under the [6] tab, select [Sensor
cleaning], then press <0>.
Y
P
O
[Clean manually].
2 Select
Turn the <5> dial to select [Clean
manually], then press <0>.
C
[OK].
3 Select
Turn the <5> dial to select [OK],
then press <0>.
X In a moment, the mirror will lockup
and the shutter will open.
“CLn” will blink on the LCD panel.
4 EndSetthethecleaning.
power switch to <2>.
As power source, using the AC Adapter Kit ACK-E6 (sold separately) is
recommended.
If you use the battery, make sure it is fully recharged. If a battery grip with
size-AA/LR6 batteries is attached, manual sensor cleaning will not be
possible.
151
3 Manual Sensor CleaningN
While cleaning the sensor, never do any of the following. Doing any
of the following will cut off the power and close the shutter. The
shutter curtains and image sensor might get damaged.
• Setting the power switch to <2>.
• Opening the battery compartment cover.
• Opening the card slot cover.
The surface of the image sensor is extremely delicate. Clean the sensor
with care.
Use a plain blower without any brush attached. A brush can scratch the
sensor.
Do not insert the blower tip inside the camera beyond the lens mount. If
the power is turned off, the shutter will close and the shutter curtains or
reflex mirror might get damaged.
Never use canned air or gas to clean the sensor. The blowing force can
damage the sensor or the spray gas can freeze on the sensor.
C
152
Y
P
O
9
Printing Images and Transferring
Images to a Computer
Y
P
O
Printing (p.154)
You can connect the camera directly to a printer and print
out the images in the card. The camera is compatible with
“wPictBridge” which is the standard for direct printing.
C
Digital Print Order Format (DPOF) (p.163)
DPOF (Digital Print Order Format) enables you to print
images recorded in the card according to your printing
instructions such as the image selection, quantity to print,
etc. You can print multiple images in one batch or give the
print order to a photofinisher.
Transferring Images to a Personal Computer (p.167)
By connecting the camera to a personal computer, you can
transfer images from the camera’s card by operating the
camera.
153
Preparing to Print
The direct printing procedure is done entirely with the camera
while looking at the LCD monitor.
Connecting the Camera to a Printer
1
Set the camera’s power switch to
<2>.
Y
P
O
the printer.
2 SetForupdetails,
see the printer’s
instruction manual.
the camera to the
3 Connect
printer.
C
Use the interface cable provided with
the camera.
When connecting the cable plug to
the camera’s <D> terminal, the
cable plug’s <D> icon must face the
front side of the camera.
To connect to the printer, refer to the
printer’s instruction manual.
4 Turn on the printer.
the camera’s power switch to
5 Set
<1>.
X Some printers may make a beeping
sound.
154
Preparing to Print
wPictBridge
the image.
6 Playback
Press the <x> button.
X The image will appear, and the <w>
icon will appear on the upper left to
indicate that the camera is connected
to a printer.
X The <l> button lamp will light in
blue.
C
Y
P
O
Movies cannot be printed.
The camera cannot be used with printers compatible only with CP Direct
or Bubble Jet Direct.
Do not use any interface cable other than the one provided.
If there is a long beeping sound in step 5, it indicates a problem with the
printer. To find out what’s wrong, do the following:
1. Press the <x> button to playback the image.
2. Press <0>.
3. On the print setting screen, select [Print].
The error message will be displayed on the LCD monitor (p.162).
You can also print RAW images taken by this camera.
If you use the battery to power the camera, make sure it is fully charged.
With a fully-charged battery, printing up to about 3.5 hours is possible.
Before disconnecting the cable, turn off the camera and printer first. Hold
the plug (not the cord) to pull out the cable.
For direct printing, using the AC Adapter Kit ACK-E6 (sold separately) to
power the camera is recommended.
155
wPrinting
The screen display and setting options will differ depending on the
printer. Some settings might not be available. For details, see the
printer’s instruction manual.
Printer-connected icon
1
Select the image to be printed.
Check that the <w> icon is
displayed on the upper left of the LCD
monitor.
Turn the <5> dial to select the
image to be printed.
<0>.
2 Press
X The print setting screen will appear.
Print setting screen
Y
P
O
Sets the printing effects (p.158).
Sets the date or file number imprinting to on
or off.
Sets the quantity to be printed.
C
Sets the trimming (p.161).
Sets the paper size, type, and layout.
Returns to step 1.
Starts the printing.
The paper size, type, and layout you have set are displayed.
* Depending on the printer, settings such as the date and file number
imprinting and trimming might not be available.
[Paper settings].
3 Select
Select [Paper settings], then press
<0>.
X The paper settings screen will
appear.
156
wPrinting
QSetting the Paper Size
Select the size of the paper loaded in
the printer, then press <0>.
X The paper type screen will appear.
YSetting the Paper Type
Select the type of the paper loaded in
the printer, then press <0>.
When using a Canon printer and
Canon paper, read the printer’s
instruction manual to check what
paper types can be used.
X The page layout screen will appear.
Y
P
O
USetting the Page Layout
C
Select the page layout, then press
<0>.
X The print setting screen will reappear.
Bordered
The print will have white borders along the edges.
Borderless
The print will have no white borders. If your printer cannot print
borderless prints, the print will have borders.
Borderedc
The shooting information* will be imprinted on the border on
9x13cm and larger prints.
xx-up
Option to print 2, 4, 8, 9, 16, or 20 images on one sheet.
20-upc
35-upp
On A4 or Letter size paper, 20 or 35 thumbnails of the images
ordered through DPOF (p.163) will be printed.
• [20-upc] will have the shooting information* imprinted.
Default
The page layout will vary depending on the printer type or its
settings.
* From the Exif data, the camera name, lens name, shooting mode, shutter speed,
aperture, exposure compensation amount, ISO speed, white balance, etc., will be
imprinted.
157
wPrinting
effects.
4 SetSettheasprinting
necessary. If you need not set
any printing effects, go to step 5.
The screen display may differ
depending on the printer.
Select the option on the upper right,
then press <0>.
Select the desired printing effect with
the dial, then press <0>.
If the <e> icon is displayed next to
<z>, you can also adjust the
printing effect (p.160).
Item
Y
P
O
Description
EOn
The image will be printed according to the printer’s standard
colors. The image’s Exif data is used to make automatic
corrections.
EOff
No automatic correction will be performed.
EVivid
The image will be printed with higher saturation to produce
more vivid blues and greens.
ENR
The image noise is reduced before printing.
0 B/W
Prints in black-and-white with true blacks.
0 Cool tone
Prints in black-and-white with cool, bluish blacks.
C
0 Warm tone Prints in black-and-white with warm, yellowish blacks.
Prints the image in the actual colors and contrast. No
zNatural
automatic color adjustments will be applied.
zNatural M
The printing characteristics are the same as the “Natural”
setting. However, this setting enables finer printing
adjustments than with “Natural.”
EDefault
The printing will differ depending on the printer. For details,
see the printer’s instruction manual.
* When you change the printing effects, it is reflected in the image displayed on
the upper left. Note that the printed image might look slightly different from the
displayed image which is only an approximation. This also applies to
[Brightness] and [Adjust levels] on page 160.
158
wPrinting
the date and file number
5 Set
imprinting.
Set as necessary.
Select <I>, then press <0>.
Set as desired, then press <0>.
of copies.
6 SetSettheasnumber
necessary.
Select <R>, then press <0>.
Set the number of copies, then press
<0>.
Y
P
O
printing.
7 StartSelect
[Print], then press <0>.
C
X The <l> button’s blue lamp will
blink and the printing will start.
With Easy printing, you can print another image with the same settings.
Just select the image and press the <l> button lit in blue. With Easy
printing, the number of copies will always be 1. (You cannot set the
number of copies.) Also, any trimming (p.161) will not be applied.
The [Default] setting for printing effects and other options are the
printer’s own default settings as set by the printer’s manufacturer. See
the printer’s instruction manual to find out what the [Default] settings are.
Depending on the image’s file size and image-recording quality, it may
take some time for the printing to start after you select [Print].
If image tilt correction (p.161) has been applied, it will take longer to print
the image.
To stop the printing, press <0> while [Stop] is displayed, then select
[OK].
159
wPrinting
e Adjustment of Printing Effects
In step 4 on page 158, select the printing
effect. When the <e> icon is displayed
next to <z>, press the <B>
button. You can then adjust the printing
effect. What can be adjusted or what is
displayed will depend on the selection
made in step 4.
Brightness
The image brightness can be adjusted.
Y
P
O
Adjust levels
When you select [Manual], you can change
the histogram’s distribution and adjust the
image’s brightness and contrast.
With the Adjust levels screen displayed, press
the <B> button to change the position of
the <h>. Turn the <5> dial to freely adjust
the shadow level (0 - 127) or highlight level
(128 - 255).
C
kBrightener
Effective in backlit conditions which can make the subject’s face look
dark. When [On] is set, the face will be brightened for printing.
Red-eye corr.
Effective in flash images where the subject has red eye. When [On]
is set, the red eye will be corrected for printing.
The [kBrightener] and [Red-eye corr.] effects will not show up on the
screen.
When you select [Detail set.], you can adjust the [Contrast],
[Saturation], [Color tone], and [Color balance]. To adjust the [Color
balance], use <9>. B is for blue, A is amber, M is magenta, and G is
green. The color in the respective direction will be corrected.
If you select [Clear all], all the printing effect settings will be reverted to
the default.
160
wPrinting
Trimming the Image
Tilt correction
You can crop the image and print only
the trimmed portion as if the image was
recomposed. Do the trimming right
before printing. If you set the trimming
and then set the print settings, you may
have to set the trimming again.
1 On the print setting screen, select [Trimming].
2 Set the trimming frame size, position, and proportion.
Y
P
O
The image area within the trimming frame will be printed. The trimming frame’s
vertical-to-horizontal proportion can be changed with [Paper settings].
Changing the trimming frame size
When you press the <u> or <I> button, the size of the
trimming frame will change. The smaller the trimming frame, the
larger the image magnification will be for the printing.
Moving the trimming frame
Use <9> to move the frame over the image vertically or horizontally. Move
the trimming frame until it covers the desired image area or composition.
Rotating the frame
Each time you press the <B> button, the trimming frame will toggle
between the vertical and horizontal orientations. This enables you to
create a vertical-oriented print from a horizontal image.
Image tilt correction
By turning the <5> dial, you can adjust the image tilt angle by
±10 degrees in 0.5-degree increments. When you adjust the
image tilt, the <O> icon on the screen will turn blue.
C
3 Press <0> to exit the trimming.
X The print setting screen will reappear.
You can check the trimmed image area on the upper left of the
print setting screen.
161
wPrinting
Depending on the printer, the trimmed image area might not be printed
as you specified.
The smaller you make the trimming frame, the grainier the picture will
look on the print.
While trimming the image, look at the camera’s LCD monitor. If you look
at the image on a TV screen, the trimming frame might not be displayed
accurately.
Handling Printer Errors
If you resolve a printer error (no ink, no paper, etc.) and select [Continue] to
resume printing but it does not resume, operate the buttons on the printer to
resume printing. For details, see the printer’s instruction manual.
Error Messages
Y
P
O
If a problem occurs during printing, an error message will appear on the
camera’s LCD monitor. Press <0> to stop printing. After fixing the
problem, resume printing. For details on how to fix a printing problem, refer
to the printer’s instruction manual.
Paper Error
Check whether the paper is properly loaded in the printer.
Ink Error
Check the printer’s ink level, and check the waste ink tank.
Hardware Error
Check for any printer problems other than paper and ink problems.
File Error
The selected image cannot be printed via PictBridge. Images taken with a
different camera or images edited with a computer might not be printable.
C
162
W Digital Print Order Format (DPOF)
You can set the print type, date imprinting, and file No. imprinting. The
print settings will be applied to all print-ordered images. (They cannot
be set individually for each image.)
Setting the Printing Options
1
Select [Print order].
X Under the [3] tab, select [Print
order], then press <0>.
Y
P
O
[Set up].
2 Select
Select [Set up], then press <0>.
C
as desired.
3 SetSetthetheoption
[Print type], [Date], and [File
[Print type]
No.].
Select the option, then press <0>.
Select the desired setting, then press
<0>.
[Date]
[File No.]
163
W Digital Print Order Format (DPOF)
Print type
Date
File number
K
L
K
L
Standard
Prints one image on one sheet.
Index
Multiple, thumbnail images are printed on one sheet.
Both
Prints both the standard and index prints.
On
Off
On
Off
[On] imprints the recorded date on the print.
[On] imprints the file No. on the print.
4
Exit the setting.
Y
P
O
Press the <7> button.
X The print order screen will reappear.
Next, select [Sel.Image], [Byn], or
[All image] to order the images to be
printed.
C
Even if [Date] and [File No.] are set to [On], the date or file No. might not
be imprinted depending on the print type setting and printer model.
When printing with DPOF, you must use the card whose print order
specifications have been set. It will not work if you just extract images
from the card and try to print them.
Certain DPOF-compatible printers and photofinishers might not be able
to print the images as you specified. If this happens with your printer,
refer to the printer’s instruction manual. Or check with your photofinisher
about compatibility when ordering prints.
Do not insert into the camera a card whose print order was set by a
different camera and then try to specify a print order. The print order may
not work or may be overwritten. Also, depending on the image type, the
print order may not be possible.
Print ordering does not work with RAW images and movies.
With [Index] prints, both the [Date] and [File No.] cannot be set to [On]
at the same time.
164
W Digital Print Order Format (DPOF)
Print Ordering
Sel.Image
Select and order images one by one.
Press the <I> button to display the
three-image view. To return to the singleimage display, press the <u> button.
After completing the print order, press
the <M> button to save the print
order to the card.
Quantity
Total images
selected
Check mark
C
Index icon
[Standard] [Both]
Press <0> and a print order for 1 copy
of the displayed image will be placed.
Then turn the <5> dial to set the
number of copies (up to 99) to be printed
for that image.
Y
P
O
[Index]
Press <0>, and the displayed image will
be included in the index print. The <X>
icon will also appear on the upper left.
Byn
Select [Byn] and select the folder. A print order for 1 copy of all the
images in the folder will be placed. If you select Clear all and a
folder, the print order for all the images in the folder will be canceled.
All image
A print order for 1 copy of all the images in the card will be placed. If
you select Clear all, the print order for all the images in the card will
be canceled.
Note that RAW images and movies will not be included in the print order
even if you set “Byn” or “All image.”
When using a PictBridge printer, print no more than 400 images for one
print order. If you specify more than this, all the images might not be
printed.
165
WDirect Printing with DPOF
With a PictBridge printer, you can easily
print images with DPOF.
1
Preparing to print.
See page 154. Follow the “Connecting the Camera to a Printer”
procedure up to step 5.
Y
P
O
2 Under the [3] tab, select [Print order].
3 Select [Print].
[Print] will be displayed only if the camera is connected to the
printer and printing is possible.
4 Set the [Paper settings]. (p.156)
C
Set the printing effects (p.158) if necessary.
5 Select [OK].
Before printing, be sure to set the paper size.
Certain printers cannot imprint the file No.
If [Bordered] is set, the date might be imprinted on the border, depending on the printer.
Depending on the printer, the date might look light if it is imprinted on a
bright background or on the border.
Under [Adjust levels], [Manual] cannot be selected.
If you stopped the printing and want to resume printing the remaining
images, select [Resume]. Note that printing will not resume if you stop
the printing and any of the following occurs:
• Before resuming the printing, you changed the print order or deleted
print-ordered images.
• When you set the index, you changed the paper setting before resuming the printing.
• When you paused the printing, the card’s remaining capacity was low.
If a problem occurs during printing, see page 162.
166
d Transferring Images to a Personal Computer
By connecting the camera to a personal computer, you can transfer
images from the camera’s card by operating the camera. This feature is
called direct image transfer.
Before connecting the camera to a personal computer, be sure
to install the provided software (EOS DIGITAL Solution Disk
on CD-ROM) in the personal computer.
For instructions to install the provided software, see the separate
sheet, CD-ROM Guide.
Preparation for Image Transfer
Y
P
O
the camera’s power switch to
1 Set
<2>.
the camera to the
2 Connect
personal computer.
C
Use the interface cable provided with
the camera.
When connecting the cable plug to
the camera’s <D> terminal, the
cable plug’s <D> icon must face the
front side of the camera.
Connect the plug on other end of the
cable to the personal computer’s
USB port.
the camera’s power switch to
3 Set
<1>.
When the program selection screen
appears on the personal computer,
select [EOS Utility].
X The [EOS Utility] screen will appear
on the computer, and the direct image
transfer screen will appear on the
camera’s LCD monitor.
167
d Transferring Images to a Personal Computer
If the [EOS Utility] screen does not appear, see Software Instruction
Manual in the CD-ROM.
Before disconnecting the cable, turn off the camera. Pull out the cable by
grasping the plug (instead of the cord).
Transferring Images to a Personal Computer
The images sent to the personal computer will be saved in the [My
Pictures] folder or [Pictures] folder in subfolders organized according
to the shooting date.
All images
Y
P
O
This is to transfer all the images in the
card to the personal computer.
Select [All images], then press the
<l> button.
X The <l> button’s blue lamp will
blink and the image transfer will start.
X When the image transfer is
completed, the lamp will stay on.
C
Since movie files are larger than still photo files, they will take longer to
transfer.
During the file transfer, do not disconnect the cable.
Shooting will be disabled while the direct transfer screen is displayed.
168
d Transferring Images to a Personal Computer
Options other than [All images] are explained below. To start the image
transfer, press the <l> button.
New images
Images which have not yet been transferred to the personal
computer will be selected by the camera automatically and
transferred.
Transfer order images
You select the images and they are transferred to the personal
computer in a batch. To select the images, see page 170.
Select & transfer
Y
P
O
You select the images individually to be
transferred. To exit, press the <M>
button.
C
Wallpaper
The image you select and transfer will appear as the personal
computer’s wallpaper. To exit, press the <M> button.
If you press <0> instead of the <l> button, a confirmation dialog
will appear. Select [OK], then press <0> to start the transfer.
RAW images and movies cannot be transferred as wallpaper.
169
d Transferring Images to a Personal Computer
3 Selecting the Images to be Transferred
Under the [3] tab, you can use
[Transfer order] to select the images to
be transferred to a personal computer.
When you select [Transfer order
images] on page 169, you can transfer
the images set by the transfer order.
Sel.Image
Y
P
O
Select and order images one by one. Press
<0> to include the displayed image in the
transfer order. The <X> icon will also appear
on the upper left. After completing the
transfer order, press the <M> button to
save the transfer order to the card.
Byn
Select [Byn] and select the folder. All the images in the folder will then
be included in the transfer order. If you select Clear all and a folder, the
transfer order for all the images in the folder will be canceled.
C
All image
When you select All image, all the images in the card will be
included in the transfer order. If you select Clear all, the transfer
order for all the images in the card will be canceled.
Do not put into the camera any images whose transfer order was set by a
different camera and then try to specify another transfer order. The images
in the transfer order might all be overwritten. Also, depending on the image
type, the transfer order may not be possible.
For the transfer order, if you select an image captured in the RAW+JPEG
mode, it will be counted as one image. During the direct image transfer, both
the RAW and JPEG images will be transferred to the personal computer.
If you want to transfer more than 999 images in one batch, select [All
images] on the direct transfer screen (p.168).
170
10
Customizing the
Camera
Y
P
O
With Custom Functions, you can change the camera
functions according to your preference. Also, the
current camera settings can be saved under the Mode
Dial’s <w>, <x>, and <y> positions.
The features explained in this chapter can be set and
used in the following shooting modes: d, s, f, a,
F.
C
171
3 Setting Custom FunctionsN
1
Select [8].
Turn the <6> dial to select the [8]
tab.
the group.
2 Select
Turn the <5> dial to select C.Fn I IV, then press <0>.
Custom Function No.
the Custom Function
3 Select
number.
Turn the <5> dial to select the
Custom Function No., then press
<0>.
4
C
Y
P
O
Change the setting as desired.
Turn the <5> dial to select the
setting (number), then press <0>.
Repeat steps 2 to 4 if you want to set
other Custom Functions.
At the bottom of the screen, the
current Custom Function settings are
indicated below the respective
function numbers.
the setting.
5 ExitPress
the <M> button.
X The screen for step 2 will reappear.
Clearing All Custom Functions
In step 2, select [Clear all Custom Func. (C.Fn)] to clear all the
Custom Function settings.
Even after all the Custom Functions are cleared, the setting for [8C.Fn IV 5: Focusing Screen] will remain unchanged.
172
3 Custom FunctionsN
1
2
3
4
5
6
7
Exposure level increments
ISO speed setting increments
ISO expansion
Bracketing auto cancel
Bracketing sequence
Safety shift
Flash sync. speed in Av mode
C.Fn II: Image
1
2
3
4
1
2
3
4
5
6
7
8
Lens drive when AF impossible
Lens AF stop button function
AF point selection method
Superimposed display
AF-assist beam firing
Mirror lockup
AF point area expansion
AF Microadjustment
C
k
p.174
p.175
k
k
k
k
k
k
Y
P
O
Long exposure noise reduction
High ISO speed noise reduction
Highlight tone priority
Auto Lighting Optimizer
C.Fn III: Autofocus/Drive
LV Movies
e
LV Stills
C.Fn I: Exposure
p.176
k
k
p.177
k
k
p.178
k
(2, 3 & 5 work/*)
p.179
k (Quick mode)
k (Quick mode)
p.180
p.181
k (Quick mode)
C.Fn IV: Operation/Others
1
2
3
4
5
6
Shutter button/AF-ON button
AF-ON/AE lock button switch
Assign SET button
Dial direction during Tv/Av
Focusing screen
Add original decision data
p.182
p.183
p.184
p.185
(3 works/*)
k
(5 & 6 do not work)
k
k
* Disabled in movie mode
Shaded Custom Functions do not function during Live View (LV) still photo
and/or movie shooting. (Settings are disabled.)
173
3 Custom Function SettingsN
C.Fn I: Exposure
C.Fn I -1
Exposure level increments
0: 1/3-stop
1: 1/2-stop
Sets 1/2-stop increments for the shutter speed, aperture, exposure
compensation, AEB, flash exposure compensation, etc. Effective when
you prefer to control the exposure in less fine increments than 1/3-stop
increments.
The exposure level will be displayed in the viewfinder and on the LCD
panel as shown below.
C.Fn I -2
0: 1/3-stop
1: 1-stop
C.Fn I -3
Y
P
O
ISO speed setting increments
ISO expansion
C
0: Off
1: On
Enables “L” (equivalent to ISO 50), “H1” (equivalent to ISO 12800), and
“H2” (equivalent to ISO 25600) to be selectable for the ISO speed.
C.Fn I -4
Bracketing auto cancel
0: On
The AEB and WB-BKT settings will be canceled if you set the power
switch to <2> or clear the camera settings. AEB will also be
canceled when the flash is ready to fire.
1: Off
The AEB and WB-BKT settings will be retained even when the power
switch is set to <2>. (When the flash is ready, AEB will be canceled.
However, the AEB amount will be retained in memory.)
174
3 Custom Function SettingsN
C.Fn I -5
Bracketing sequence
The AEB shooting sequence and white balance bracketing sequence can
be changed.
0: 0, -, +
1: -, 0, +
WB Bracketing
B/A Direction
M/G Direction
0 : Standard exposure 0 : Standard white balance 0 : Standard white balance
- : Decreased exposure - : Blue bias
- : Magenta bias
+ : Increased exposure + : Amber bias
+ : Green bias
AEB
C.Fn I -6
Y
P
O
Safety shift
0: Disable
1: Enable (Tv/Av)
This works in the shutter-priority AE (s) and aperture-priority AE (f)
modes. When the subject’s brightness changes erratically and the
correct autoexposure cannot be obtained, the camera will change the
exposure setting automatically to obtain a correct exposure.
C.Fn I -7
C
Flash sync. speed in Av mode
0: Auto
1: 1/200-1/60 sec. auto
When flash is used with aperture-priority AE (f), this prevents a slow
flash-sync speed from being used in low-light conditions. Effective for
preventing subject blur and camera shake. The only problem is that,
while the subject will be properly exposed with the flash, the background
will come out dark.
2: 1/200 sec. (fixed)
The flash-sync speed is fixed to 1/200 sec. This better prevents subject
blur and camera shake than with setting 1. However, the background will
come out darker than with setting 1.
175
3 Custom Function SettingsN
C.Fn II: Image
C.Fn II -1
Long exposure noise reduction
0: Off
1: Auto
For 1 sec. or longer exposures, noise reduction is performed
automatically if noise typical of long exposures is detected. This [Auto]
setting is effective in most cases.
2: On
Noise reduction is performed for all exposures of 1 sec. or longer. The
[On] setting may be effective for noise that cannot be detected or
reduced with the [Auto] setting.
Y
P
O
With setting 1 and 2, after the picture is taken, the noise reduction
process may take the same amount of time as the exposure. During the
noise reduction, shooting is still possible as long as the maximum burst
indicator in the viewfinder shows “1” or higher.
With setting 2, if a long exposure is used during Live View shooting,
“BUSY” will be displayed and the Live View display will not appear untill
the noise reduction process is completed. (You cannot take another
picture.)
C.Fn II -2
C
High ISO speed noise reduction
Reduces the noise generated in the image. Although noise reduction is
applied at all ISO speeds, it is particularly effective at high ISO speeds. At
low ISO speeds, the noise in the shadow areas is further reduced. Change
the setting to suit the noise level.
0: Standard
1: Low
2: Strong
3: Disable
With setting 2, the maximum burst for continuous shooting will greatly
decrease.
176
3 Custom Function SettingsN
C.Fn II -3
Highlight tone priority
0: Disable
1: Enable
Improves the highlight detail. The dynamic range is expanded from the
standard 18% gray to bright highlights. The gradation between the grays
and highlights becomes smoother.
With setting 1, noise in the shadow areas may be slightly more than usual.
With setting 1, the settable ISO speed range will be 200 - 6400.
Also, <A> (dynamic range) will be displayed on the LCD panel and in the
viewfinder.
C.Fn II -4
Y
P
O
Auto Lighting Optimizer
If the images comes out dark or the contrast is
low, the brightness and contrast are corrected
automatically.
For RAW images, the content of the settings in
the camera can be applied when processed with
Digital Photo Professional (bundled software).
0: Standard
1: Low
2: Strong
3: Disable
C
Ð
Depending on the shooting conditions, noise might increase.
This function will not work if manual exposure or bulb exposure has been
set.
In fully-automatic modes (1/C), [Standard] will be set automatically.
177
3 Custom Function SettingsN
C.Fn III: Autofocus/Drive
C.Fn III -1
Lens drive when AF impossible
If autofocus is executed, but focus cannot be achieved, the camera can
either keep trying to focus or stop.
0: Focus search on
1: Focus search off
Prevents the camera from becoming grossly out of focus as it attempts
to focus again. Especially convenient with super telephoto lenses which
can become extremely out of focus.
C.Fn III -2
Y
P
O
Lens AF stop button function
* The AF stop button is provided only on super telephoto IS lenses.
0: AF stop
1: AF start
AF operates only while the button is pressed. While the button is
pressed, AF operation with the camera is disabled.
2: AE lock
When the button is pressed, AE lock is applied. Convenient when you
want to focus and meter at different parts of the picture.
3: AF point: M 9 Auto/Auto 9 center
In the manual AF point selection mode, the button instantly switches to
automatic AF point selection only while you hold it down. This is
convenient in the AI Servo AF mode when you can no longer track the
subject with the manually-selected AF point. In the automatic AF point
selection mode, the button selects the center AF point only while you
hold it down.
4: ONE SHOT z AI SERVO
In the One-Shot AF mode, the camera switches to AI Servo AF mode
only while you hold down the button. And in the AI Servo AF mode, the
camera switches to One-Shot AF mode only while you hold down the
button. Convenient when you need to keep switching between One-Shot
AF and AI Servo AF for a subject which keeps moving and stopping.
5: IS start
With the lens’ IS switch already <ON>, the Image Stabilizer operates
when you press the button. With setting 5, the Image Stabilizer will not
operate when you press the shutter button halfway.
C
178
3 Custom Function SettingsN
C.Fn III -3
AF point selection method
0: Normal
Press the <S> button, then use <9> or <6/5> dial to select an AF
point.
1: Multi-controller direct
Without pressing the <S> button first, you can just use the <9> to
select the desired AF point. Pressing the <S> button will set it to
automatic AF point selection.
2: Quick Control Dial direct
Without pressing the <S> button first, you can just use the <5> to
select the desired AF point. By holding down the <S> button and
turning the <6> dial, you can set the exposure compensation.
C.Fn III -4
Y
P
O
Superimposed display
0: On
1: Off
When focus is achieved, the AF point will not flash in red in the
viewfinder. Recommended when it is bothersome to see it light up.
The AF point will still light when you select it.
C.Fn III -5
C
AF-assist beam firing
Enables or disables the EOS-dedicated Speedlite’s AF-assist beam.
0: Enable
1: Disable
The AF-assist beam is not emitted.
If the external, EOS-dedicated Speedlite’s [AF-assist beam firing] Custom
Function is set to [Disabled], the Speedlite will not emit the AF-assist beam
even if the camera’s C.Fn III -5-0 is set.
179
3 Custom Function SettingsN
C.Fn III -6
Mirror lockup
0: Disable
1: Enable
Prevents camera vibrations caused by the reflex mirror action which can
disturb shooting with super telephoto lenses or close-up (macro)
shooting. See page 101 for the mirror lockup procedure.
C.Fn III -7
AF point area expansion
0: Disable
1: Enable
When you select AI Servo AF and the center AF point, the six Assist AF
points (p.80) will also function. Seven AF points will track the subject.
This is effective for subjects that move erratically, making it difficult for
only the center AF point to track it.
C
180
Y
P
O
3 Custom Function SettingsN
C.Fn III -8
AF Microadjustment
Normally, this adjustment is not required. Do this adjustment
only if necessary. Note that doing this adjustment may prevent
correct focusing from being achieved. AF adjustment cannot be
done during Live View shooting in Live and Liveu modes.
You can make fine adjustments for the AF’s
point of focus. It can be adjusted in ±20 steps
(-: Forward / +: Backward).
The adjustment amount of one step varies
depending on the maximum aperture of the lens.
Adjust, shoot (73), and check the focus.
Repeat to adjust the AF’s point of focus.
Y
P
O
With setting 1 or 2 selected, press the <B> button to view the register
screen. To cancel all the registered adjustments, press the <L> button.
0: Disable
1: Adjust all by same amount
The same adjustment amount is applied to
all lenses.
C
2: Adjust by lens
An adjustment can be set individually for any
particular lens. Adjustments for up to 20 lenses
can be registered in the camera. When a lens
whose focus adjustment has been registered
is attached to the camera, its point of focus will
be shifted accordingly.
If adjustments for 20 lenses have already been registered and you want to
register an adjustment for another lens, select a lens whose adjustment can
be overwritten or deleted.
It is best to make the adjustment at the actual place to be photographed.
This will make the adjustment more precise.
With setting 2, if an Extender is used, the adjustment will be registered
for the lens and Extender combination.
The registered AF microadjustments will be retained even if you use the Custom
Function to clear all settings (p.172). However, the setting itself will be [0: Disable].
181
3 Custom Function SettingsN
C.Fn IV: Operation/Others
C.Fn IV -1
Shutter button/AF-ON button
0: Metering + AF start
1: Metering + AF start/AF stop
During autofocusing, you can press the <p> button to stop the
autofocusing.
2: Metering start/Metering + AF start
This is useful for subjects which keep moving and stopping repeatedly.
In the AI Servo AF mode, you can press the <p> button to start or
stop the AI Servo AF operation. The exposure is set at the moment the
picture is taken. Thus, the optimum focusing and exposure will always
be achieved as you wait for the decisive moment.
3: AE lock/Metering + AF start
Convenient when you want to focus and meter at different parts of the
picture. Press the <p> button to meter and autofocus, and press
the shutter button halfway to attain AE lock.
4: Metering + AF start/Disable
The <p> button will not function.
C.Fn IV -2
0: Disable
C
Y
P
O
AF-ON/AE lock button switch
1: Enable
The functions of the <p> and <A/y> buttons will be switched
with each other’s function.
When set to 1, press the <p> button to display the image index or to
reduce the image display.
182
3 Custom Function SettingsN
C.Fn IV -3 Assign SET button
You can assign a frequently-used function to <0>. When the camera is
ready to shoot, you can press <0>.
0: Normal (disabled)
1: Image quality
Press <0> to display the image-recording quality setting screen on the
LCD monitor. Turn the <6> or <5> dial to set the desired imagerecording quality, then press <0>.
2: Picture Style
Press <0> to display the Picture Style selection screen on the LCD
monitor. Turn the <6> or <5> dial to select a Picture Style, then
press <0>.
3: Menu display
Gives the same function as the <M> button.
4: Image replay
Gives the same function as the <x> button.
5: Quick Control screen
When you press <0>, the Quick Control screen will appear. Use <9>
to select the function, then turn the <5> or <6> dial to set it.
6: Record movie (Live View)
If the [6 Live View/Movie func. set.] menu has been set to enable
movie shooting (p.121), press <0> to start shooting a movie when the
camera is ready to shoot.
C.Fn IV -4
C
Y
P
O
Dial direction during Tv/Av
0: Normal
1: Reverse direction
The dial’s turning direction for setting the shutter speed and aperture
can be reversed.
In the manual exposure mode, the direction of the <6> and <5>
dials will be reversed. In other shooting modes, the <6> dial will be
reversed. The direction of the <5> dial will be the same in the manual
exposure mode and for setting exposure compensation.
183
3 Custom Function SettingsN
C.Fn IV -5
Focusing Screen
If you change the focusing screen, change this setting to match the
focusing screen type. This is to obtain the correct exposures.
0: Eg-A
1: Eg-D
2: Eg-S
About focusing screen characteristics
Eg-A: Standard Precision Matte
Standard focusing screen that comes with the camera. Provides
good viewfinder brightness and enables easy manual focusing.
Y
P
O
Eg-D: Precision Matte with grid
This is the Eg-A with a grid. It makes
it easier to align horizontal or vertical
lines.
Eg-S: Super Precision Matte
Focusing screen which makes manual focusing easier than with
the Eg-A. Effective for users who mainly focus manually.
C
About Super Precision Matte Eg-S and Maximum Lens Aperture
This focusing screen is optimized for f/2.8 and faster lenses.
If the lens is slower than f/2.8, the viewfinder will look darker than with
Eg-A.
Even if all the Custom Functions are cleared, this setting will be retained.
Since the standard Eg-A focusing screen comes with the camera, C.Fn
IV -5-0 is already factory set.
To change the focusing screen, refer to the instructions that come with
the focusing screen.
The C.Fn IV -5 setting is not included in the registered camera user
settings (p.187).
184
3 Custom Function SettingsN
C.Fn IV -6
Add original decision data
0: Off
1: On
Data for verifying whether the image is original or not is appended to the
image automatically. When the shooting information of an image
appended with the verification data is displayed (p.129), the <L> icon
will appear.
To verify whether the image is original, the Original Data Security Kit
OSK-E3 (sold separately) is required.
The images are not compatible with the image encryption/decryption
features of Original Data Security Kit OSK-E3.
C
Y
P
O
185
3 Registering My MenuN
For faster access, you can register up to six menus and Custom
Functions whose settings you change frequently.
1
Select [My Menu settings].
Under the [9] tab, select [My Menu
settings], then press <0>.
[Register].
2 Select
Turn the <5> dial to select
[Register], then press <0>.
Y
P
O
the desired items.
3 Register
Turn the <5> dial to select the item,
C
About My Menu settings
then press <0>.
When the confirmation dialog
appears and you select [OK] and
press <0>, the menu will be
registered.
You can register up to six items in My
Menu.
To return to the screen in step 2,
press the <M> button.
Sort
You can change the order of the registered menu items in My Menu.
Select [Sort] and select the menu item whose order you want to
change. Then press <0>. With [z] displayed, turn <5> to change
the order, then press <0>.
Delete / Delete all items
Deletes the registered menu items. [Delete] deletes one menu item
at a time, and [Delete all items] deletes all menu items.
Display from My Menu
When [Enable] is set, the [9] tab will be displayed first when you
display the menu screen.
186
w Register Camera User SettingsN
Under the Mode Dial’s <w>, <x>, and <y> positions, you can
register most of the current camera settings including your preferred
shooting mode, menus, Custom Function settings, etc.
1
Select [Camera user setting].
Under the [7] tab, select [Camera
user setting], then press <0>.
Y
P
O
[Register].
2 Select
Turn the <5> dial to select
[Register], then press <0>.
the desired items.
3 Register
Turn the <5> dial to select the Mode
C
Dial position where the camera
settings are to be registered, then
press <0>.
When the confirmation dialog
appears, select [OK] and press
<0>.
X The current camera settings (p.190)
will be registered under the Mode
Dial’s C* position.
About Camera user setting’s [Clear settings]
In step 2, if you select [Clear settings], the respective Mode Dial
position will revert to the default setting effective before you registered
the camera settings. The procedure is the same as step 3.
187
w Register Camera User SettingsN
Settings Registered
Shooting functions
Shooting mode + setting, ISO speed, AF mode, AF point, Metering
mode, Drive mode, Exposure compensation amount, Flash
exposure compensation amount
Menu Functions
[1] Quality, Beep, Shoot w/o card, Review time, Peripheral
illumination correction
[2] Exposure compensation/AEB, White balance, Custom WB,
WB SHIFT/BKT, Color space, Picture Style
[4] Highlight alert, AF point display, Histogram, Slide show,
Image jump w/6
[5] Auto power off, Auto rotate, File numbering
[6] LCD brightness, Sensor cleaning (Auto cleaning), Live View/
Movie function setting
[7] INFO. button, External Speedlite control
[8] Custom Functions
C
Y
P
O
The My Menu settings will not be registered.
When the Mode Dial is set to the <w>, <x>, or <y> position, the [7
Clear settings] and [8 Clear all Custom Func. (C.Fn)] menus will not
work.
Even when the Mode Dial is set to the <w>, <x>, or <y> position,
you can still change the drive mode and menu settings. If you want to
register those changes, follow the procedure on the preceding page.
By pressing the <B> button, you can check which shooting mode is
registered under the <w>, <x>, and <y> positions (p.190).
188
11
Reference
Y
P
O
This chapter provides reference information for camera
features, system accessories, etc. The back of this
chapter also has an index to make it easier to look up
needed information.
C
189
B Checking Camera Settings
When the camera is ready to shoot, press the <B> button and
“Camera settings” and “Shooting functions” screens will appear.
When “Shooting functions” is displayed, you can set the shooting
functions while looking at the LCD monitor.
Display “Camera set.” and
“Shoot. func.”
Press the <B> button.
X The button toggles between the two
screens.
Y
P
O
Display one of them.
Under the [7] tab, select [INFO.
button], then press <0>.
Select [Camera set.] or [Shoot.
func.], then press <0>.
Camera Settings
C
Shooting mode registered under
the Mode Dial’s w, x, and y
positions
(p.76)
(p.68, 69)
(p.67)
Auto rotate display (p.146)
Transfer of some images failed*
(p.29, 55)
Date/Time (p.42)
Auto power off (p.44)
* This icon is displayed only when the transfer of some images failed while using
the Wireless File Transmitter WFT-E4/E4A.
190
B Checking Camera Settings
Shooting Functions
AE lock
Aperture
ISO speed
Highlight tone priority
Shutter speed
Exposure level/
AEB range
Flash exposure
compensation
Shooting mode
AF point
Image-recording
quality
Quick Control icon
Battery check
Metering mode
Y
P
O
White balance correction
C
Picture Style
Drive mode
Shots remaining
White balance
AF mode
Maximum burst
When you press <9> straight down, the Quick Control screen
appears (p.38).
If you press the <m>, <o>, <n>, or <S> button,
the setting screen will appear on the LCD monitor and you can turn
the <6> or <5> dial to set the respective function. You can also
select the AF point with <9>.
If you turn off the power while the “Shooting settings display” screen is
displayed, the same screen will be displayed when you turn on the power
again. To avoid this, press the <B> button to turn off the display on the
LCD monitor, then turn off the power switch.
191
3 Checking the Battery Information
You can check the battery’s condition on the LCD monitor. The Battery
Pack LP-E6 has a unique serial No., and you can register multiple
battery packs to the camera. When you use this feature, you can check
the registered battery pack’s remaining capacity and operation history.
Select [Battery info.].
Under the [7] tab, select [Battery
info.], then press <0>.
X The battery info screen will appear.
Battery position
Model of the battery or household power
source being used.
Y
P
O
Remaining battery capacity displayed by the
battery check display (p.28) in 1% increments.
Shutter count or shots taken with the
current battery. The number is reset when
the battery is recharged.
C
Battery’s recharge performance level is
displayed in one of three levels.
(Green): Battery’s recharge
performance is fine.
(Green): Battery’s recharge performance
is slightly degraded.
(Red): Purchasing a new battery is
recommended.
Do not use any battery other than the Battery Pack LP-E6. Otherwise, the
camera’s full performance may not be attained or malfunction can result.
If you use two LP-E6 battery packs in the Battery Grip BG-E6, battery
information for the two battery packs will appear.
When size-AA/LR6 batteries are used in the Battery Grip BG-E6, only
the battery check display will be displayed.
If for some reason, communication with the battery is not successful, the
battery check display will show <
> on the LCD panel and in the
viewfinder. [Cannot communicate with battery] will be displayed. Just
select [OK] and you can continue shooting.
192
3 Checking the Battery Information
Registering the Battery to the Camera
You can register up to six Battery Pack LP-E6’s to the camera. To
register multiple battery packs to the camera, do the procedure below
for each battery pack.
1
Press the <B> button.
With the Battery info. screen
displayed, press the <B> button.
X The battery history screen will
appear.
X If the battery has not been registered,
it will be grayed out.
Y
P
O
[Register].
2 Select
Turn the <5> dial to select
[Register], then press <0>.
X The confirmation dialog will appear.
C
[OK].
3 Select
Turn the <5> dial to select [OK],
then press <0>.
X The battery pack will be registered,
and the battery history screen will
reappear.
X The grayed out battery will now be
displayed in white letters.
Press the <M> button. The
Battery info. screen will reappear.
Battery registration is not possible if size-AA/LR6 batteries are in the
Battery Grip BG-E6 or if you use the AC Adapter Kit ACK-E6.
If six battery packs have already been registered, [Register] cannot be
selected. To delete unnecessary battery information, refer to page 195.
193
3 Checking the Battery Information
Labeling the Serial No. on the Battery
Affixing the serial No. onto all the registered Battery Pack LP-E6’s with
a label makes it convenient.
1
Serial No.
a81a
5900
Write the serial No. on a label.
Write the serial No. displayed on the
battery history screen on a label
about 25 mm x 15 mm / 1.0 in. x
0.6 in. in size.
Y
P
O
out the battery and affix the
2 Take
label.
C
Set the power switch to <2>.
Open the battery compartment cover
and remove the battery.
Affix the label as shown (side with no
electrical contacts) in the illustration.
Repeat this procedure for all of your
battery packs so you can easily see
the serial No.
Do not affix the label on any part other than as shown in the illustration in
step 2. Otherwise, the misplaced label might make it difficult to insert the
battery or impossible to turn on the camera.
194
3 Checking the Battery Information
Checking the Remaining Capacity of a Registered Battery Pack
You can check the remaining capacity of any battery pack (even while
not installed) and also when it was last used.
Serial No.
Look for the serial No.
Date last used
Refer to the battery’s serial No. label
and look for the battery’s serial No. on
the battery history screen.
X You can check the respective battery
pack’s remaining capacity and the
date when it was last used.
Remaining capacity
Y
P
O
Deleting the Registered Battery Pack Information
1
Select [Delete battery info.].
Follow step 2 on page 193 to select [Delete battery info.], then
press <0>.
C
2 Select the battery pack to be deleted.
Turn the <5> dial to select the battery pack to be deleted, then
press <0>.
X <X> will appear.
To delete another battery pack, repeat this procedure.
3 Press the <L> button.
X The confirmation dialog will appear.
4 Select [OK].
Turn the <5> dial to select [OK], then press <0>.
X The battery pack information will be deleted, and the screen in
step 1 will reappear.
195
Using a Household Power Outlet
With the AC Adapter Kit ACK-E6 (sold separately), you can connect the
camera to a household power outlet and not worry about the battery
level.
1
Connect the DC plug.
Connect the DC Coupler’s plug to the
AC adapter’s socket.
the power cord.
2 Connect
Connect the power cord as shown in
Y
P
O
the illustration.
After using the camera, unplug the
power plug from the power outlet.
the cord in the groove.
3 Place
Insert the cord carefully without
C
damaging the cord.
the DC Coupler.
4 Insert
Open the battery compartment cover
DC coupler cord hole
and open the DC Coupler cord notch
cover.
Insert the DC Coupler securely until it
locks and put the cord through the
notch.
Close the cover.
Do not connect or disconnect the power cord while the camera’s power
switch is set to <1> or <J>.
196
Replacing the Date/Time Battery
The date/time (back-up) battery maintains the camera’s date and time.
Its service life is about 5 years. If you turn on the power and the date/
time is reset, replace the back-up battery with a new CR1616 lithium
battery as described below.
The date/time setting will also be reset, so be sure to set the
correct date/time (p.42).
1 Set the power switch to <2>.
the battery holder
2 Unscrew
screw.
Y
P
O
Use a small Philips screwdriver.
Be careful not to lose the screw.
holder.
3 TakePushoffoutthethebattery
battery in direction d.
C
the battery in the battery
4 Replace
holder.
Make sure the battery is in the proper
+ – orientation.
5 Tighten the battery holder screw.
For the date/time battery, be sure to use a CR1616 lithium battery.
197
Function Availability Table
o: Set automatically k: User selectable
Mode Dial
Quality
ISO speed
C
d
s
f
a
F
JPEG
k
k
k
k
k
k
k
RAW
k
k
k
k
k
k
k
RAW+JPEG
k
k
k
k
k
k
k
Auto
o
o
k
k
k
k
k
k
k
k
k
k
o
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
WB correction
k
k
k
k
k
WB bracketing
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
Manual
Standard
Portrait
Landscape
Picture
Style
Neutral
Faithful
Monochrome
User Defined
C
Auto WB
Preset WB
White
balance
Color
space
: Not selectable
1
Custom WB
Color temperature setting
sRGB
Y
P
O
k
o
o
o
o
Adobe RGB
Auto Lighting Optimizer
o
o
k
k
k
Peripheral illumination correction
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
Long exposure noise reduction
High ISO speed noise reduction
Highlight tone priority
198
o
o
Function Availability Table
o: Set automatically k: User selectable
Mode Dial
1
C
One-Shot
AI Focus
AF point
selection
Auto
Metering
mode
Partial
Spot
AEB
C
AE lock
k
k
k
k
k
k
k
o
o
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
o
o
Y
P
O
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
k
2 sec. self-timer/
Remote control
k
k
k
k
k
FE lock
k
k
k
k
k
Flash exposure
compensation
k
k
k
k
k
Flash control
k
k
k
k
k
Stills only
k
k
k
k
k
k
k
k
k
k
o
Continuous shooting
Live View
shooting
k
k
Single shooting
External
Speedlite
F
k
k
Depth-of-field preview
Drive
a
k
k
Exposure compensation
Exposure
f
k
k
Center-weighted average
Program shift
s
o
Manual
Evaluative
d
k
o
AI Servo
AF
: Not selectable
10 sec. self-timer/
Remote control
Stills+movie
k
k
k
199
Menu Settings
1 Shooting 1 (Red)
Page
73 / 83 / 74 / 84 / 76 / 86
Quality
1 / D1 / D2
54
Beep
On / Off
–
Shoot w/o card
On / Off
29
Review time
Off / 2 sec. / 4 sec. / 8 sec. / Hold
145
Peripheral illumination
Enable / Disable
correction
70
2 Shooting 2 (Red)
Exposure
compensation/AEB
1/3-stop increments, ±2 stops
97
White balance
Q/W/E/R/Y/U/I/O/P
(2500 - 10000)
65
Custom WB
Manual setting of white balance
66
WB SHIFT/BKT
WB correction: White balance correction
WB-BKT: White balance bracketing
68
69
Color space
sRGB / Adobe RGB
76
Picture Style
Dust Delete Data
C
Y
P
O
PStandard / QPortrait / RLandscape /
SNeutral / UFaithful / VMonochrome / 59-64
WUser Def. 1, 2, 3
Obtains data to be used to erase dust spots
149
Erase-protect images
141
Rotate vertical images
134
Erase images
Erase images
142
Print order
Specifies images to be printed (DPOF)
163
Transfer order
Select images to be transferred to a personal
computer
170
External media backup
Displayed when external media is used via
WFT-E4/E4A (sold separately)
3 Playback 1 (Blue)
Protect images
Rotate
–
The shaded menu items are not displayed in the fully-automatic modes (1/
C).
200
Menu Settings
4 Playback 2 (Blue)
Page
Highlight alert
Disable / Enable
129
AF point display
Disable / Enable
129
Histogram
Brightness / RGB
130
Slide show
Select the images, set the Play time and
repeat settings for automatic playback
135
Image jump w/6
1 image / 10 images / 100 images / Screen /
Date / Folder / Movies / Stills
132
Auto power off
1min. / 2 min. / 4 min. / 8 min. / 15 min. / 30
min. / Off
44
Auto rotate
OnzD / OnD / Off
146
Format
Initialize and erase data in the card
43
File numbering
Continuous / Auto reset / Manual reset
74
Select folder
Create and select a folder
72
WFT settings
Displayed when WFT-E4/E4A (sold separately)
is attached
–
Displayed when external media is used via
WFT-E4/E4A (sold separately)
–
5 Set-up 1 (Yellow)
C
Recording function+
media select
6 Set-up 2 (Yellow)
LCD brightness
Date/Time
Y
P
O
Auto: Adjustable to one of three brightness levels
Manual: Adjustable to one of seven brightness levels
144
Set the date (year, month, day) and time (hour,
min., sec.)
42
Language
25 languages
42
Video system
NTSC / PAL
139
Auto cleaning: Enable / Disable
Sensor cleaning
Clean now
Clean manually
Live View/Movie
function settings
148
151
LV func. setting* / Silent shooting / Metering timer
Grid display / AF mode / Movie recording size /
Sound recording
108
* In the <1/C> modes, the option will change to [Movie recording].
201
Menu Settings
7 Set-up 3 (Yellow)
Page
Battery info.
Type, Remaining capacity, Shutter count,
Recharge performance, Battery registration,
Battery history
192
INFO. button
Normal display / Camera settings / Shooting
function
190
External Speedlite
control
Flash function settings / Flash C.Fn settings /
Clear all Speedlite C.Fn’s
105
Camera user setting
Register current camera settings to the Mode
Dial’s w, x, or y position
187
Clear settings
Clear all camera settings / Delete copyright
information
45
Firmware Ver.
For updating the firmware
–
Y
P
O
8 Custom Functions (Orange)
C.Fn I : Exposure
C.Fn II : Image
C.Fn III : Autofocus/
Drive
C.Fn IV : Operation/
Others
Clear all Custom
Functions (C.Fn)
Customize the camera as desired
C
174
176
178
182
Clears all Custom Function settings
172
Register frequently-used menu items and
Custom Functions
186
9 My Menu (Green)
My Menu settings
202
Troubleshooting Guide
If there is a problem, first refer to this Troubleshooting Guide. If this
Troubleshooting Guide does not resolve the problem, contact your
dealer or nearest Canon Service Center.
Power-Related Problems
The battery cannot be recharged with the battery charger provided.
Do not recharge any battery pack other than genuine Canon Battery
Pack LP-E6.
The charger’s lamp blinks at high speed.
Y
P
O
If there is a problem with the battery charger or battery pack or if
communication with the battery pack (non-Canon battery packs) is not
possible, the protective circuit will terminate the charging and the
orange lamp will blink quickly at a regular interval. If there is a problem
with the battery charger or battery pack, unplug the charger’s power
plug from the power outlet. Detach and reattach the battery pack to the
charger. Wait 2 to 3 minutes, then reconnect the power plug to the
power outlet. If the problem persists, contact your dealer or nearest
Canon Service Center.
C
The charger’s lamp does not blink.
If the internal temperature of the battery pack attached to the charger
is high, the charger will not charge the battery for safety reasons (lamp
off). During the charging, if the battery’s temperature becomes high for
any reason, the charging will stop automatically (lamp blinks).When
the battery temperature goes down, the charging will resume
automatically.
The camera does not operate even when the power switch is set to <1>.
The battery is not properly installed in the camera (p.26).
Recharge the battery (p.24).
Make sure the battery compartment cover is closed (p.26).
Make sure the card slot cover is closed (p.29).
203
Troubleshooting Guide
The access lamp still blinks even when the power switch is
set to <2>.
If the power is cut off while an image is being recorded to the card, the
access lamp will light/blink for a few sec. When the image recording is
completed, the power will turn off automatically.
The battery becomes exhausted quickly.
Use a fully-charged battery (p.24).
The battery performance might be degraded. See the [7 Battery
info.] menu to check the battery’s performance level (p.192). If the
battery performance is poor, replace the battery with a new one.
If you keep displaying the Quick Control screen (p.38) or shooting with
Live View function (p.107) for a prolonged period, the number of
possible shots will decrease.
Y
P
O
The camera turns off by itself.
C
Auto power off is in effect. If you do not want auto power off to take
effect, set the [5 Auto power off] menu to [Off].
Shooting-Related Problems
No images can be shot or recorded.
The card is not properly inserted (p.29).
If the card is full, replace the card or delete unnecessary images to
make room (p.29, 142).
If you try to focus in One-Shot AF mode while the focus confirmation
light <o> in the viewfinder blinks, a picture cannot be taken. Press the
shutter button halfway again to focus, or focus manually (p.35, 84).
204
Troubleshooting Guide
The image is out of focus.
Set the lens focus mode switch to <AF> (p.31).
To prevent camera shake, hold the camera still and press the shutter
button gently (p.34, 35).
If the lens has an Image Stabilizer, set the IS switch to <1>.
The card cannot be used.
If a card error message is displayed, see page 30 or 209.
Y
P
O
The maximum burst during continuous shooting is lower.
Set [8C.Fn II -2: High ISO speed noise reduction] to one of the
following settings: [Standard/Low/Disable]. If it is set to [Strong], the
maximum burst will greatly decrease (p.176).
If you shoot a subject which has minute details (field of grass, etc.), the
file size will be larger and the maximum burst will be lower as
mentioned on page 55.
C
ISO 100 cannot be set.
If [8C.Fn II -3: Highlight tone priority] is set to [Enable], the
settable ISO speed range will be ISO 200 - 6400. When [Disable] is
set, you can set any ISO speed (p.177).
When I use the <f> mode with flash, the shutter speed
becomes slow.
If you shoot night scenes, the shutter speed becomes slow
automatically (slow-sync shooting) so that both the subject and
background are properly exposed. If you do not want a slow shutter
speed to be set, set [8C.Fn I -7: Flash sync. speed in Av mode] to
1 or 2 (p.175).
205
Troubleshooting Guide
The flash does not fire.
Make sure the flash (or PC sync cord) is securely attached to the
camera.
If you use a non-Canon flash with Live View shooting, set [Silent
shoot.] to [Disable] (p.104).
The flash always fires at full output.
If you use a flash unit other than an EX-series Speedlite, the flash will
always be fired at full output (p.103).
When the [Flash metering mode] flash Custom Function is set to
[TTL (autoflash)], the flash will always be fired at full output (p.106).
Y
P
O
Flash exposure compensation cannot be set.
If flash exposure compensation has already been set with the
Speedlite, flash exposure compensation cannot be set with the
camera. When the Speedlite’s flash exposure compensation is set to
0, flash exposure compensation can be set with the camera.
C
Live View shooting is not possible.
For Live View shooting, use a memory card (a hard disk-type card is not
recommended). A hard disk-type card requires a lower temperature
range for operation than normal memory cards. If the temperature gets
too high, the Live View shooting may stop temporarily to prevent damage
to the card’s hard disk. When the camera’s internal temperature
decreases, you can resume Live View shooting (p.112).
I cannot take still photos at the shutter speed, aperture or ISO
speed I set during Live View shooting.
Set [Screen settings] to [Stills display] or [Exposure simulation]
(p.109).
206
Troubleshooting Guide
The movie shooting quits by itself.
If the card’s writing speed is slow, movie shooting may stop
automatically. Use a card with a read/write speed of at least 8 MB per
sec. To find out the card’s read/write speed, see the card
manufacturer’s Web site.
If the movie file size reaches 4 GB or if the movie is shot for 29 min. 59
sec., the movie shooting will stop automatically.
When the movie is played, camera operation noise can be heard.
Y
P
O
If you operate the camera’s dial or lens during movie shooting, the
operation noise will also be recorded. Use an external microphone
(commercially available) (p.123).
Display & Operation Problems
The LCD monitor does not display a clear image.
C
If dust is adhering to the LCD monitor, wipe its surface with a lens cloth
or soft cloth.
In low or high temperatures, the LCD monitor display may seem slow
or might look black. It will return to normal at room temperature.
Few tabs and options are displayed on the menu screen.
In the fully-automatic modes (1/C), some tabs and options are not
displayed. Set the shooting mode to d/s/f/a/F (p.40).
Part of the image blinks in black.
The [4 Highlight alert] option is set to [Enable] (p.129).
A red box is displayed on the image.
The [4 AF point disp.] option is set to [Enable] (p.129).
207
Troubleshooting Guide
The image cannot be erased.
If the image has been erase-protected, it cannot be erased (p.141).
The file name’s first character is an underscore (“_MG_”).
Set the color space to sRGB. If Adobe RGB is set, the first character
will be an underscore (p.76).
The file numbering does not start from 0001.
If you use a card which already has images recorded, the file
numbering might start from the last image in the card (p.74).
Y
P
O
The shooting date and time displayed is incorrect.
The correct date and time has not been set (p.42).
No image appears on the TV screen.
Make sure the stereo video cable or HDMI cable’s plug is connected
all the way in (p.139,140).
Set the video OUT format (NTSC/PAL) to the same video format as
the TV (p.201).
Use the stereo video cable that came with the camera (p.139).
C
Printing-Related Problems
There are fewer printing effects than listed in the instruction
manual.
The printing effects displayed may differ depending on the printer. The
instruction manual lists all the printing effects available (p.158).
208
Error Codes
Error No.
Countermeasures
If there is a problem with the camera, an
error message appears. Follow the onscreen instructions.
To recover from the error screen, turn the
power switch <2> and <1>, or
remove and reinstall the battery.
If error 02 (Card problem) is displayed,
remove and reinstall the card or format the
card. This may resolve the problem.
If the same error keeps appearing, there may be a problem. Write
down the error code and consult your nearest Canon Service
Center.
No.
01
Y
P
O
Error Message & Solution
Communications between the camera and lens is faulty. Clean the
lens contacts.
Î Clean the electrical contacts on the camera and lens, use a Canon
lens, or have the camera or lens checked or repaired. (p.13,16)
C
There is a problem with the card. Replace the card.
02
Î Remove and install the card again, replace the card, or format the
card. (p.29, 43)
Cannot save images because the card is full. Replace the card.
04
06
Î Replace the card, erase unnecessary images, or format the card.
(p.29, 142, 43)
Self Cleaning Sensor Unit malfunction. Consult with Canon
Service Center.
Î Operate the power switch or have the camera checked or repaired.
(p.27)
10, 20, Shooting is not possible. Turn the power switch to <2> and
30, 40, <1> again or re-install the battery.
50, 60, Î Operate the power switch, remove and install the battery again, use
70, 80
a Canon lens, or have the camera checked or repaired. (p.27,26)
209
System Map
Eyepiece Extender
EP-EX15
ST-E2
220EX 430EX II 580EX II Macro Ring Lite
MR-14EX
Macro Twin Lite
MT-24EX
Rubber Frame Eb
E-series Dioptric
Adjustment Lenses
Bundled
Accessories
Y
P
O
Focusing
Screen Eg-A
Eyecup Eb
C
Wide Strap
EW-EOS5DMKII
Angle Finder C
Battery Charger
LC-E6 or LC-E6E
Focusing Screen
Eg-D Eg-S
Battery Pack
LP-E6
Date / time
CR1616 lithium battery
Battery Grip
BG-E6
Car Battery
Cable
CB-570
Car Battery Charger
CBC-E6
210
AC Adapter DC Coupler
AC-E6
DR-E6
Battery Magazine
BGM-E6
AC Adapter Kit
ACK-E6
System Map
Timer Remote Remote
Switch
Controller
RS-80N3
TC-80N3
Wireless
Controller
LC-5
Remote
Controller
RC-5
Remote
Controller
RC-1
EF lenses
Y
P
O
External microphone
HDMI Cable HTC-100
Stereo Video Cable STV-250N
TV/Video
USB external media
C
EOS DIGITAL Software Instruction
Solution Disk
Manual
Interface Cable
IFC-200U
Wireless File Transmitter
WFT-E4/WFT-E4A
Wireless LAN
access point
USB GPS unit
Wireless LAN adapter
Ethernet port
Interface Cable IFC-500U
Personal
computer
USB port
Original Data
Security Kit
OSK-E3
Card reader
Windows Vista
Windows XP
Mac OS X
PC card slot
PictBridge-compatible printer
CF card
PCMCIA adapter
211
Specifications
• Type
Type:
Recording media:
Image sensor size:
Compatible lenses:
Digital, single-lens reflex, AF/AE camera
Type I or II CF card, UDMA-compatible
Approx. 36 x 24 mm
Canon EF lenses (except EF-S lenses)
(The effective lens focal length is the same as indicated on the lens)
Canon EF mount
Lens mount:
• Image Sensor
Type:
Effective pixels:
Aspect ratio:
Dust delete feature:
CMOS sensor
Approx. 21.10 megapixels
3:2
Auto, Manual, Dust Delete Data appending
• Recording System
Recording format:
Image type:
Recorded pixels:
C
Create/select a folder:
• Image Processing
Picture Style:
White balance:
Noise reduction:
Automatic image
brightness correction:
Highlight tone priority:
Lens peripheral
illumination correction:
212
Y
P
O
Design rule for Camera File System 2.0
JPEG, RAW (14-bit Canon original)
RAW+JPEG simultaneous recording possible
Large : Approx. 21.00 megapixels (5616 x 3744)
Medium: Approx. 11.10 megapixels (4080 x 2720)
Small : Approx. 5.20 megapixels (2784 x 1856)
RAW : Approx. 21.00 megapixels (5616 x 3744)
sRAW1 : Approx. 10.00 megapixels (3861 x 2574)
sRAW2 : Approx. 5.20 megapixels (2784 x 1856)
Possible
Standard, Portrait, Landscape, Neutral, Faithful,
Monochrome, User Def. 1 - 3
Auto, Preset (Daylight, Shade, Cloudy, Tungsten light,
White fluorescent light, Flash), Custom, Color
temperature setting (2500-10000K)
White balance correction and white balance bracketing
features provided
* Color temperature information transmission enabled
Applicable to long exposures and high ISO speed shots
Auto Lighting Optimizer
Provided
Provided
Specifications
• Viewfinder
Type:
Eye-level pentaprism
Coverage:
Vertical/Horizontal approx. 98%
Magnification:
Approx. 0.71x (-1 m-1 with 50mm lens at infinity)
Eye point:
Approx. 21 mm (From eyepiece lens center at -1 m-1)
Built-in dioptric adjustment: -3.0 - +1.0 m-1 (dpt)
Focusing screen:
Interchangeable (2 types sold separately), Eg-A standard
focusing screen provided
Mirror:
Quick-return type
Depth-of-field preview: Provided
• Autofocus
Type:
AF points:
Metering range:
Focus modes:
AF-assist beam:
AF Microadjustment:
• Exposure Control
Metering modes:
Y
P
O
TTL secondary image-registration, phase detection
9 plus 6 Assist AF points
EV -0.5 - 18 (at 23°C/73°F, ISO 100)
One-Shot AF, AI Servo AF, AI Focus AF, Manual focusing
(MF)
Emitted by the EOS-dedicated external Speedlite
AF Microadjustment possible
C
35-zone TTL full-aperture metering
• Evaluative metering (linkable to any AF point)
• Partial metering (approx. 8% of viewfinder at center)
• Spot metering (approx. 3.5% of viewfinder at center)
• Center-weighted average metering
Metering range:
EV 1 - 20 (at 23°C/73°F with EF50mm f/1.4 USM lens, ISO 100)
Exposure control:
Program AE (Full Auto, Creative Auto, Program), shutterpriority AE, aperture-priority AE, manual exposure, bulb
exposure
ISO speed:
Full Auto, Creative Auto: ISO 100 - 3200 set automatically
(Recommended
P, Tv, Av, M, B: ISO 100 - 6400 (in 1/3-stop increments)
exposure index)
settable, Auto, or expandable to ISO 50
(L), ISO 12800 (H1), or ISO 25600 (H2)
Exposure compensation: Manual and AEB (Settable in combination with manual
exposure compensation)
Settable amount: ±2 stops in 1/3- or 1/2-stop increments
AE lock:
Auto: Applied in One-Shot AF mode with evaluative
metering when focus is achieved
Manual: By AE lock button
213
Specifications
• Shutter
Type:
Shutter speeds:
Electronically-controlled, focal-plane shutter
1/8000 sec. to 30 sec., bulb (Total shutter speed range.
Available range varies by shooting mode.) X-sync at 1/200 sec.
• Drive System
Drive modes:
Single shooting, continuous shooting, 10-sec. self-timer/
remote control, 2-sec. self-timer/remote control
Continuous shooting speed: Max. approx. 3.9 shots/sec.
Max. burst:
JPEG Large/Fine: Approx. 78 shots (Approx. 310 shots),
RAW: Approx. 13 shots (Approx. 14 shots),
RAW+JPEG Large/Fine: Approx. 8 shots (Approx. 8 shots)
* Figures are based on Canon’s testing standards (ISO
100 and Standard Picture Style) using a 2GB card.
* Figures in parentheses apply to an Ultra DMA (UDMA)
2GB card based on Canon’s testing standards.
• External Speedlite
Compatible flash:
Flash metering:
Flash exposure
compensation:
FE lock:
PC terminal:
C
• Live View Shooting
Shooting modes:
Focusing:
Metering modes:
Metering range:
Silent shooting:
Movie:
214
Y
P
O
EX-series Speedlites
E-TTL II autoflash
±2 stops in 1/3- or 1/2-stop increments
Provided
Provided
Still photo shooting and movie shooting
Quick mode (Phase-difference detection)
Live mode, Live face detection mode (Contrast detection)
Manual focusing (5x/10x magnification possible)
Evaluative metering with the image sensor (still photos) /
Center-weighted average metering (movies)
EV 0 - 20 (at 23°C/73°F with EF50mm f/1.4 USM lens,
ISO 100)
Provided (Still photo shooting)
MOV (Video: H.264, Audio: Linear PCM)
Recording size: 1920x1080 (Full HD), 640x480 (SD)
Continuous movie shooting time: Full HD approx. 12 min.
SD approx. 24 min.
* Based on Canon's testing standards using a 4GB card.
Specifications
• LCD Monitor
Type:
Monitor size and dots:
Coverage:
Brightness adjustment:
Interface languages:
TFT color liquid-crystal monitor
3-in. with approx. 920,000 dots (VGA)
Approx. 100%
Auto (Darker/Standard/Brighter), Manual (7 levels)
25
• Image Playback
Image display formats: Single, Single + Info (Image-recording quality, shooting
information, histogram)
4-image index, 9-image index, image rotate possible
Zoom magnification:
Approx. 1.5x - 10x
Image browsing
methods:
Single image, jump by 10 or 100 images, jump by
screen, by shooting date, by folder, by movie, by stills
Highlight alert:
Overexposed highlights blink
Movie playback:
Enabled (LCD monitor, video/audio OUT, HDMI OUT)
Built-in speaker
• Direct Printing
Compatible printers:
Printable images:
Print ordering:
• Customization
C
Custom Functions:
Camera user settings:
My Menu registration:
• Interface
Digital terminal:
Audio/video output
terminal:
HDMI mini OUT terminal:
External microphone
input terminal:
Remote control terminal:
Wireless remote control:
Extension system
terminal:
Y
P
O
PictBridge-compatible printers
JPEG and RAW images
DPOF Version 1.1 compatible
25
Register under Mode Dial’s C1, C2, and C3 positions
Provided
For personal computer communication and direct printing
(Hi-Speed USB)
3.5mm dia. stereo mini jack (NTSC/PAL selectable)
Type C (Auto switching of resolution)
3.5mm dia. stereo mini jack
Compatible with remote control via N3 Type
With Remote Controller RC-1/RC-5
For connection to Wireless File Transmitter WFT-E4/E4A
215
Specifications
• Power Source
Battery:
Battery Pack LP-E6 (Qty. 1)
* AC power can be supplied via AC Adapter Kit ACK-E6
* With Battery Grip BG-E6 attached, size-AA/LR6
batteries can be used
Remaining capacity, Shutter count, and Recharge
performance displayed
With viewfinder shooting:
At 23°C/73°F, approx. 850 shots. At 0°C/32°F, approx.
750 shots.
With Live View shooting:
At 23°C/73°F, approx. 200 shots. At 0°C/32°F, approx.
180 shots.
Battery information:
Battery life:
(Based on CIPA
testing standards)
• Dimensions and Weight
Y
P
O
Dimensions (W x H x D): 152 x 113.5 x 75 mm / 6.0 x 4.5 x 3.0 in.
Weight:
Approx. 810 g / 28.6 oz. (body only)
• Operation Environment
Working temperature range: 0°C - 40°C / 32°F - 104°F
Working humidity:
85% or less
C
• Battery Pack LP-E6
Type:
Rechargeable lithium-ion battery
Rated voltage:
7.2 V DC
Battery capacity:
1800 mAh
Working temperature range: 0°C - 40°C / 32°F - 104°F
Working humidity:
85% or less
Dimensions (W x H x D): 38.4 x 21 x 56.8 mm / 1.5 x 0.8 x 2.2 in.
Weight:
Approx. 80 g / 2.8 oz.
• Battery Charger LC-E6
Type:
Charger dedicated to the Battery Pack LP-E6
Recharging time:
Approx. 2 hours 30 min.
Rated input:
100 - 240 V AC (50/60 Hz)
Rated output:
8.4 V DC/1.2A
Working temperature range: 5°C - 40°C / 41°F - 104°F
Working humidity:
85% or less
Dimensions (W x H x D): 69 x 33 x 93 mm / 2.7 x 1.3 x 3.7 in. (Plug collapsed)
Weight:
Approx. 130 g / 4.6 oz.
216
Specifications
• Battery Charger LC-E6E
Type:
Charger dedicated to the Battery Pack LP-E6
Power cord length:
Approx. 2 m / 6.6 ft.
Recharging time:
Approx. 2 hours 30 min.
Rated input:
100 - 240 V AC (50/60 Hz)
Rated output:
8.4 V DC/1.2A
Working temperature range: 5°C - 40°C / 41°F - 104°F
Working humidity:
85% or less
Dimensions (W x H x D): 69 x 33 x 93 mm / 2.7 x 1.3 x 3.7 in.
Weight:
Approx. 125 g / 4.4 oz. (excluding power cord)
• EF24-105mm f/4L IS USM
Angle of view:
Lens construction:
Minimum aperture:
Closest focusing
distance:
Max. magnification:
Field of view:
Y
P
O
Diagonal extent: 84° - 23°20'
Horizontal extent: 74° - 19°20'
Vertical extent: 53° - 13°
18 elements in 13 groups
f/22
0.45 m / 1.48 ft. (From image sensor plane)
0.23x (at 105 mm)
535 x 345 - 158 x 106 mm / 21.1 x 13.6 - 6.2 x 4.2 in. (at
0.45 m)
Image Stabilizer:
Lens shift type
Filter size:
77 mm
Lens cap:
E-77U
Max. diameter x length: 83.5 x 107 mm / 3.3 x 4.2 in.
Weight:
Approx. 670 g / 23.6 oz.
Hood:
EW-83H
Case:
LP1219 (sold separately)
C
All specifications above are based on Canon’s testing standards.
The camera’s specifications and exterior are subject to change without notice.
If a problem occurs with a non-Canon lens attached to the camera, consult the
respective lens maker.
About Full HD 1080
Full HD 1080 indicates compatibility with High-Definition with
1080 vertical pixels (scanning lines).
217
Trademarks
Adobe is a trademark of Adobe Systems Incorporated.
CompactFlash is a trademark of SanDisk Corporation.
Windows is a trademark or registered trademark of Microsoft Corporation in the
United States and other countries.
Macintosh and Mac OS is a trademark or registered trademark of Apple Inc. in
the United States and other countries.
HDMI, HDMI logo, and High-Definition Multimedia Interface are a trademark or
registered trademark of HDMI Licensing LLC.
All other corporate and product names and trademarks mentioned in this
manual are the property of their respective owners.
Y
P
O
* This digital camera supports Design rule for Camera File System 2.0 and Exif
2.21 (also called “Exif Print”). Exif Print is a standard that enhances
compatibility between digital cameras and printers. By connecting the camera
to an Exif Print-compliant printer, the shooting information is incorporated to
optimize the print output.
C
About MPEG-4 Licensing
“This product is licensed under AT&T patents for the MPEG-4 standard and may be
used for encoding MPEG-4 compliant video and/or decoding MPEG-4 compliant video
that was encoded only (1) for a personal and non-commercial purpose or (2) by a
video provider licensed under the AT&T patents to provide MPEG-4 compliant video.
No license is granted or implied for any other use for MPEG-4 standard.”
* Notice displayed in English as required.
218
Safety Warnings
Follow these safeguards and use the equipment properly to prevent injury, death,
and material damage.
Preventing Serious Injury or Death
• To prevent fire, excessive heat, chemical leakage, and explosions, follow the
safeguards below:
- Do not use any batteries, power sources, and accessories not specified in this
booklet. Do not use any home-made or modified batteries.
- Do not short-circuit, disassemble, or modify the battery pack or back-up battery. Do
not apply heat or apply solder to the battery pack or back-up battery. Do not expose
the battery pack or back-up battery to fire or water. And do not subject the battery
pack or back-up battery to strong physical shock.
- Do not install the battery pack or back-up battery in reversed polarity (+ –). Do not
mix new and old or different types of batteries.
- Do not recharge the battery pack outside the allowable ambient temperature range
of 0°C - 40°C (32°F - 104°F). Also, do not exceed the recharging time.
- Do not insert any foreign metallic objects into the electrical contacts of the camera,
accessories, connecting cables, etc.
• Keep the back-up battery away from children. If a child swallows the battery, consult a
physician immediately. (Battery chemicals may harm the stomach and intestines.)
• When disposing of a battery pack or back-up battery, insulate the electrical contacts
with tape to prevent contact with other metallic objects or batteries. This is to prevent
fire or an explosion.
• If excessive heat, smoke, or fumes are emitted during battery pack recharging,
immediately unplug the battery charger from the power outlet to stop the recharging
and prevent a fire.
• If the battery pack or back-up battery leaks, changes color, deforms, or emits smoke or
fumes, remove it immediately. Be careful not to get burned in the process.
• Prevent any battery leakage from contacting your eyes, skin, and clothing. It can
cause blindness or skin problems. If the battery leakage contacts your eyes, skin, or
clothing, flush the affected area with lots of clean water without rubbing it. See a
physician immediately.
• During the recharging, keep the equipment away from the reach of children. The cord
can accidentally choke the child or give an electrical shock.
• Do not leave any cords near a heat source. It can deform the cord or melt the
insulation and cause a fire or electrical shock.
• Do not fire the flash at someone driving a car. It may cause an accident.
• Do not fire the flash near a person’s eyes. It may impair the person’s vision. When
using flash to photograph an infant, keep at least 1 meter away.
• Before storing the camera or accessory when not in use, remove the battery pack and
disconnect the power plug. This is to prevent electrical shock, heat generation, and
fire.
• Do not use the equipment where there is flammable gas. This is to prevent an
explosion or fire.
C
Y
P
O
219
• If you drop the equipment and the casing breaks open to expose the internal parts, do
not touch the internal parts due to the possibility of electrical shock.
• Do not disassemble or modify the equipment. High-voltage internal parts can cause
electrical shock.
• Do not look at the sun or an extremely bright light source through the camera or lens.
Doing so may damage your vision.
• Keep the camera from the reach of small children. The neck strap can accidentally
choke the child.
• Do not store the equipment in dusty or humid places. This is to prevent fire and
electrical shock.
• Before using the camera inside an airplane or hospital, check if it is allowed.
Electromagnetic waves emitted by the camera may interfere with the plane’s
instruments or the hospital’s medical equipment.
• To prevent fire and electrical shock, follow the safeguards below:
- Always insert the power plug all the way in.
- Do not handle a power plug with wet hands.
- When unplugging a power plug, grasp and pull the plug instead of the cord.
- Do not scratch, cut, or excessively bend the cord or put a heavy object on the cord.
Also do not twist or tie the cords.
- Do not connect too many power plugs to the same power outlet.
- Do not use a cord whose insulation has been damaged.
• Occasionally unplug the power plug and use a dry cloth to clean off the dust around
the power outlet. If the surrounding is dusty, humid, or oily, the dust on the power outlet
may become moist and short-circuit the outlet to cause a fire.
C
Y
P
O
Preventing Injury or Equipment Damage
• Do not leave equipment inside a car under the hot sun or near a heat source. The
equipment may become hot and cause skin burns.
• Do not carry the camera around while it is attached to a tripod. Doing so may cause
injury. Also make sure the tripod is sturdy enough to support the camera and lens.
• Do not leave a lens or lens-attached camera under the sun without the lens cap
attached. Otherwise, the lens may concentrate the sun’s rays and cause a fire.
• Do not cover or wrap the battery-recharging apparatus with a cloth. Doing so may trap
heat within and cause the casing to deform or catch fire.
• If you drop the camera in water or if water or metal fragments enter inside the camera,
promptly remove the battery pack and back-up battery. This is to prevent fire and
electrical shock.
• Do not use or leave the battery pack or back-up battery in a hot environment. Doing so
may cause battery leakage or a shorter battery life. The battery pack or back-up
battery can also become hot and cause skin burns.
• Do not use paint thinner, benzene, or other organic solvents to clean the equipment.
Doing so may cause fire or a health hazard.
If the product does not work properly or requires repair, contact
your dealer or your nearest Canon Service Center.
220
Digital Camera Model DS126201 Systems
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for
class B digital devices, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following
measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
The cable with the ferrite core provided with the digital camera must be used
with this equipment in order to comply with Class B limits in Subpart B of Part
15 of the FCC rules.
Do not make any changes or modifications to the equipment unless otherwise
specified in the manual. If such changes or modifications should be made, you
could be required to stop operation of the equipment.
Canon U.S.A. Inc.
One Canon Plaza, Lake Success, NY 11042, U.S.A.
Tel No. (516)328-5600
C
Y
P
O
This Class B digital apparatus complies with Canadian ICES-003.
When connecting to and using a household power outlet, use only AC
Adapter Kit ACK-E6 (rated input: 100-240 V AC 50/60 Hz, rated output:
8.0 V DC). Using anything else can cause fire, overheating, or
electrical shock.
221
IMPORTANT SAFETY INSTRUCTIONS
1. SAVE THESE INSTRUCTIONS — This manual contains important safety
and operating instructions for Battery Charger LC-E6 & LC-E6E.
2. Before using the charger, read all instructions and cautionary remarks on
(1) the charger, (2) the battery pack, and (3) the product using the battery
pack.
3. CAUTION — To reduce risk of injury, charge only the Battery Pack LP-E6.
Other types of batteries may burst, causing personal injury and other
damage.
4. Do not expose the charger to rain or snow.
5. Use of an attachment not recommended or sold by Canon may result in
fire, electric shock, or personal injury.
6. To reduce risk of damage to electric plug and cord, pull by plug rather than
by cord when disconnecting charger.
7. Make sure cord is located so that it will not be stepped on, tripped over, or
otherwise subjected to damage or stress.
8. Do not operate the charger with damaged cord or plug - replace them
immediately.
9. Do not operate the charger if it has received a sharp blow, been dropped,
or otherwise damaged in any way; take it to a qualified serviceman.
10. Do not disassemble the charger; take it to a qualified serviceman when
service or repair is required. Incorrect reassembly may result in a risk of
electric shock or fire.
11. To reduce risk of electric shock, unplug charger from outlet before
attempting any maintenance or cleaning.
C
Y
P
O
MAINTENANCE INSTRUCTION
Unless otherwise stated in this manual, there are no user serviceable parts
inside. Refer servicing to qualified serviceman.
USA and Canada only:
The Lithium ion/polymer battery that powers the product is
recyclable. Please call 1-800-8-BATTERY for information on
how to recycle this battery.
For CA, USA only
Included lithium battery contains Perchlorate Material – special handling may
apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate/ for details.
222
Index
10-sec. or 2-sec. delay....................86
1920x1080 ....................................121
1st-curtain sync.............................105
4- or 9-image index display...........131
640x480 ........................................121
Borders (Yes/No) .......................... 157
Bracketing ........................ 69, 97, 174
Bulb ................................................ 99
Noise reduction ........................ 176
Bulb exposures............................... 99
C
A
AC Adapter Kit ..............................196
Access lamp....................................30
Adobe RGB.....................................76
AE lock............................................98
AEB.................................97, 174, 175
AF J Focusing
AF Microadjustment ......................181
AF stop button...............................178
AF-ON (AF start) button..........35, 182
AI FOCUS (AI Focus AF)................80
AI SERVO (AI Servo AF) ..........50, 79
AI Servo AF.....................................79
Aperture-priority AE ........................92
Assist AF points ..............................80
Auto Lighting Optimizer...........47, 177
Auto playback ...............................135
Auto power off...........................27, 44
Auto reset........................................75
Auto rotate of vertical images .......146
Autofocus J Focusing
Automatic selection (AF).................81
Av (Aperture-priority AE).................92
C
w, x, y ............................. 20, 187
C (Creative Auto) ......................... 51
Cable ................................ 3, 139, 140
Camera
Camera shake.......................... 101
Clear camera settings ................ 45
Holding the camera.................... 34
Setting description display ....... 190
Camera shake .......................... 33, 35
Camera user settings ............. 20, 187
Card.................................... 13, 29, 43
Card reminder ............................ 29
Format........................................ 43
Problem...................................... 30
Center-weighted average metering... 95
CF card J Card
Cleaning ....................................... 147
Clear camera settings .................... 45
Clock .............................................. 42
Color space .................................... 76
Color temperature .......................... 67
Color tone............................... 61, 160
Continuous ..................................... 74
Continuous shooting............... 85, 191
Contrast.................................. 61, 160
Cool tone (printing)....................... 158
Copyright information ..................... 46
Cord.................................. 3, 139, 140
Creative Auto.................................. 51
M icon ............................................. 4
Cross-type focusing........................ 83
Custom Functions ........................ 172
Clearing all ............................... 172
Y
P
O
B
B (Bulb) ...........................................99
B/W ...........................................60, 62
Battery J Power
Battery check ..................................28
Battery Grip...................................192
Beeper ..............................48, 79, 200
Black-and-white (printing) .............158
Black-and-white image..............60, 62
223
Index
D
Date/Time .......................................42
Date/time battery replacement...197
DC coupler....................................196
Default (printing) ...........................158
Depth-of-field preview.....................93
Digital terminal ......................154, 167
Dioptric adjustment .........................34
Direct printing J Printing
Direct selection .............................179
Direct transfer ...............................167
DPOF............................................163
Drive mode .............................85, 191
Dust Delete Data ..........................149
Dynamic range..............................177
E
Y
P
O
Erase (image) ...............................142
Error codes ...................................209
E-TTL autoflash ............................106
Evaluative metering ........................95
Exposure compensation .........96, 174
Exposure simulation .....................109
EX-series Speedlite ......................103
Extension ........................................75
External Speedlite J Flash
Eyecup..........................................100
Eyepiece cover .......................23, 100
C
F
Faithful ............................................60
FE lock..........................................103
FEB...............................................105
File name ........................................74
File number.....................................74
File size...........................55, 123, 129
Filter effect (Monochrome)..............62
Fine (Image-recording quality)........55
Firmware Ver.................................202
224
Flash
Custom Functions.................... 106
External Speedlite............ 103, 104
FE lock..................................... 103
Flash control ............................ 105
Flash exposure compensation .. 103
Flash sync (1st/2nd curtain)..... 105
Flash-sync speed............. 104, 175
Flash exposure
compensation............... 103, 174, 191
Flash mode .................................. 105
Flash-sync contacts ....................... 16
Focus confirmation light ................. 48
Focus lock ...................................... 50
Focus mode switch .................. 31, 84
Focusing
AF mode ............................ 78, 191
AF point display ....................... 129
AF point selection ...... 81, 179, 191
AF-assist beam........................ 179
Beeper ......................... 48, 79, 200
Difficult-to-focus subjects ........... 84
Live View shooting ........... 113, 119
Manual focusing................. 84, 119
Out of focus ................. 49, 84, 118
Recompose................................ 50
Focusing screen........................... 184
Folder Create/Select ...................... 72
Format (CF card initialization) ........ 43
Full Auto ......................................... 48
Full HD ......................................... 121
Full High-Definition....................... 121
Function availability table ............. 198
G
Grid display .................................. 111
Grid matte .................................... 184
H
HDMI ............................................ 140
High-Definition...................... 121, 140
High ISO speed noise reduction .. 176
Index
Highlight alert ................................129
Highlight detail loss .......................129
Highlight tone priority ....................177
Histogram (Brightness/RGB) ........130
Hot shoe........................................104
Household power ..........................196
I
ICC profile .......................................76
Illumination (LCD panel) .................99
Image
AF point display ........................129
Auto playback ...........................135
Auto rotate ................................146
Erase ........................................142
Highlight alert............................129
Histogram .................................130
Index.........................................131
Jump display (Image browsing) ..132
Magnified view..........................133
Manual rotate............................134
Playback ...................................127
Protect ......................................141
Shooting information.................129
Transfer to personal computer ...167
View on TV ...............................139
Image dust prevention ..................147
Image review time.........................145
Image Stabilizer (lens) ....................33
Image transfer...............................167
Image-recording quality ..................54
Index display .................................131
ISO speed .......................57, 174, 191
Automatic setting ........................58
ISO expansion ..........................174
C
Language selection ........................ 42
Large (Image-recording quality) ..... 55
LCD monitor ................................... 13
Brightness adjustment ............. 144
Image playback........................ 127
Menu settings..................... 40, 200
Shooting functions ................... 191
LCD panel ...................................... 18
Illumination................................. 99
Lens.......................................... 21, 31
Lock release............................... 32
Peripheral illumination correction .... 70
Live View shooting ....................... 107
Grid display .............................. 111
Information display................... 112
Live face detection mode ......... 116
Live mode ................................ 115
Manual focusing............... 113, 119
Movie recording ....................... 121
Possible shots.......................... 111
Quick mode.............................. 113
Screen settings ........................ 109
Silent shooting ......................... 120
Long exposure noise reduction .... 176
Y
P
O
J
JPEG...............................................54
Jump display .................................132
M
M (Manual exposure) ..................... 94
Magnified view...................... 119, 133
Main Dial
Main Dial .................................... 36
Quick Control Dial ...................... 37
Malfunction ................................... 203
Manual AF point selection .............. 81
Manual exposure............................ 94
Manual focusing ..................... 84, 119
Manual reset................................... 75
Maximum burst......................... 55, 56
Medium (Image-recording quality) ... 55
Memory card J Card
L
Landscape ......................................59
225
Index
Menu
Menu settings ...........................200
My Menu...................................186
Setting operation ........................40
3 icon .........................................4
Metering mode........................95, 191
MF (Manual focusing) .....................84
Microphone (Built-in/External) ......124
Mirror lockup .........................101, 180
Mode Dial J Shooting mode
Monochrome image ..................60, 62
Movie
Playback...................................137
Recording .................................121
View on TV ...............................139
Multi-controller ..........................36, 81
My Menu .......................................186
N
Y
P
O
Natural/M (printing) .......................158
Neutral ............................................60
Noise reduction.............................176
Nomenclature .................................16
Non-Canon flash units ..................104
Normal (Image-recording quality) ...55
NR (printing) .................................158
NTSC ............................................201
Number ...........................................74
O
C
ONE SHOT (One-Shot AF).............79
One-Shot AF...................................79
Original decision
(image verification) data ...............185
P
P (Program AE) ..............................88
PAL ...............................................201
Paper settings (printing)................156
Partial metering...............................95
226
PC terminal ............................ 16, 104
Peripheral illumination correction ... 70
Personal computer
Image transfer.......................... 167
Wallpaper................................. 169
Personal white balance .................. 67
PictBridge..................................... 153
Picture Style ............................ 59 - 64
Pixels.............................................. 54
Playback J Image
Portrait............................................ 59
Possible shots .................. 28, 55, 111
Power
Auto power off...................... 27, 44
Battery check ............................. 28
Battery info............................... 192
Household power..................... 196
Possible shots.............. 28, 55, 111
Recharge ................................... 24
Switch ........................................ 27
Precision matte ............................ 184
Pressing completely ....................... 35
Pressing halfway ............................ 35
Printing ......................................... 153
Page layout.............................. 157
Paper settings.......................... 156
PictBridge ................................ 153
Print Order (DPOF).................. 163
<l> button.......................... 159
Printing effects ......................... 160
Tilt correction ........................... 161
Trimming .................................. 161
Program AE.................................... 88
Program shift ............................. 89
Protect (image erase-protection) ... 141
Q
Quick Control Dial .......................... 37
Quick Control screen...................... 38
Quick mode .................................. 113
Index
R
RAW..........................................54, 56
RAW+JPEG ....................................54
Recharge ........................................24
Recording func..............................201
Remote control shooting .......100, 102
Remote Switch..............................100
Rotate (image) ..............134, 146, 161
S
Safety shift ....................................175
Safety warnings ............................219
Saturation................................61, 160
Self-timer.........................................86
Sensor cleaning ............................147
Sepia (Monochrome) ......................62
SET button ......................................40
Sharpness.......................................61
Shoot w/o card ................................29
Shooting information display.........129
Shooting mode................................20
Aperture-priority AE ....................92
Bulb ............................................99
Creative Auto..............................51
Full Auto .....................................48
Manual exposure ........................94
Program AE ................................88
Shutter-priority AE ......................90
Shooting settings display ..............191
Shutter button .................................35
Shutter sync. .................................105
Shutter-priority AE...........................90
Silent shooting ..............................120
Single image display .....................128
Single shooting ...............................85
Slide show.....................................135
Small (Image-recording quality) ......54
Small RAW................................54, 56
Spot metering..................................95
C
sRAW (Small RAW).................. 54, 56
sRGB.............................................. 76
Still photo J Image
Strap ............................................... 23
Superimposed display .................. 179
System map ................................. 210
T
Toning effect (Monochrome)........... 62
Transfer order (image) ................. 170
Trimming (printing) ....................... 161
Tripod socket .................................. 17
Tv (Shutter-priority AE)................... 90
Y
P
O
U
Ultra DMA (UDMA)................... 29, 55
USB (Digital) terminal........... 154, 167
User defined ................................. 187
V
Video system........................ 139, 201
View on TV ................................... 139
Viewfinder....................................... 19
Dioptric adjustment .................... 34
Vivid.............................................. 158
Volume (Movie playback) ............. 138
W
Wallpaper ..................................... 169
Warm tone (printing)..................... 158
WB J White balance
White balance......................... 65, 191
Bracketing .................................. 69
Correction .................................. 68
Custom....................................... 66
Personal..................................... 67
Wireless remote control................ 102
227
CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
U.S.A.
CANON U.S.A. INC.
One Canon Plaza, Lake Success, NY 11042-1198, U.S.A.
For all inquires concerning this product, call toll free in the U.S.
1-800-OK-CANON
CANADA
CANON CANADA INC. HEADQUARTERS
6390 Dixie Road, Mississauga, Ontario L5T 1P7, Canada
CANON CANADA INC. MONTREAL BRANCH
5990, Côte-de-Liesse, Montréal Québec H4T 1V7, Canada
CANON CANADA INC. CALGARY OFFICE
2828, 16th Street, N.E. Calgary, Alberta T2E 7K7, Canada
For all inquiries concerning this product, call toll free in Canada
1-800-OK-CANON
EUROPE,
AFRICA &
MIDDLE EAST
CANON EUROPA N.V.
Bovenkerkerweg 59-61, 1185 XB Amstelveen, The Netherlands
CANON FRANCE S.A.S.
17,Quai du Président Paul Doumer, 92414 Courbevoie Cedex, France
CANON UK LTD.
Woodhatch Reigate,Surrey RH2 8BF, United Kingdom
CANON DEUTSCHLAND GmbH
Europark Fichtenhain A10, 47807 Krefeld, Germany
CANON ITALIA S.p.A.
Via Milano 8, 20097 San Donato Milanese, (MI), Italy
CANON Schweiz A.G.
Industriestrasse 12, 8305 Dietlikon, Switzerland
Canon GmbH
Zetschegasse 11, A-1230 Vienna, Austria
CANON España,S.A.
Av. De Europa,6 Alcobendas 28108 Madrid, Spain
CANON Portugal S.A.
Rua Alfredo da Silva,14 Alfragide 2610-016 Amadora, Portugal
CENTRAL &
SOUTH AMERICA
CANON LATIN AMERICA, INC.
703 Waterford Way, Suite 400 Miami, FL 33126,U.S.A.
ASIA
CANON (China) Co., LTD.
15F Jinbao Building No.89 Jinbao Street, Dongcheng District, Beijing 100005, China
CANON HONGKONG CO., LTD.
19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kowloon, Hong Kong
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenue, #04-01 Keppel Bay Tower, Singapore 098632
CANON KOREA CONSUMER IMAGING INC.
Gangnam Finance Center 17F, 737,Yeoksam-Dong, Gangnam-Gu, Seoul, 135-984, Korea
OCEANIA
CANON AUSTRALIA PTY. LTD.
1 Thomas Holt Drive, North Ryde, Sydney N.S.W. 2113, Australia
CANON NEW ZEALAND LTD.
Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand
JAPAN
CANON MARKETING JAPAN INC.
16-6, Kohnan 2-chome, Minato-ku, Tokyo 108-8011, Japan
C
Y
P
O
This Instruction Manual booklet is current as of September 2008. For information
on the camera’s compatibility with any accessories and lenses introduced after
this date, contact any Canon Service Center.
CT1-1028-000
© CANON INC. 2008
PRINTED IN JAPAN