CMA5000a Specifications

Product Brochure
CMA5000a
Multi-layer Network Test Platform
Features
All-in-one support for
installation and
maintenance of each
network layer
• Physical layer
• Data link layer
• Network layer
• Transport layer
Benefits
• Fast service roll-out
• Lower total costs
CMA5000a
Multi-Layer Network Test Platform
All-in-one Platform for SONET/SDH, OTN, Gigabit Ethernet,
DWDM, OTDR, ORL, PMD, CD
Improved customer service, easy maintenance and lower costs are key issues for
operators of high-speed data services.
The CMA5000a Multi-Layer Network Test Platform has a full range of versatile modules
and easy to use touch panel, supporting fast network rollout and maintenance at lower
total cost.
• Multi-measurement Functions
The CMA5000a measurement modules support
SONET/SDH, OTN, 10 Gigabit Ethernet, Gigabit
Ethernet, DWDM, OTDR, ORL, PMD, and CD
measurements.
For field-testing, one unit supports all required
physical layer, data link layer, network layer, and
transport layer measurement items.
• Lower Total Cost of Ownership
One CMA5000a supports all measurements
required for rolling out an optical network and
maintenance follow-up. Multiple measurement
modules can be set and operated simultaneously in
one mainframe, eliminating the need for other
single-function specialist measuring instruments
and cutting total cost of ownership.
The easy to use touch panel and GUI shorten
operator training too.
• Fast Service Roll-out
The consistent GUI between measurement modules
simplifies work, allowing the operator to focus on
evaluating each network layer efficiently and
contributing to the fastest service rollout and
maintenance.
A touch of a button can generate PDF-formatted
report of measurement conditions and results.
Engineer can operate CMA5000a over Ethernet to
support measurements at local site.
/12 Page
2/12
CMA5000a Multi-layer Network Test Platform
Platform
1
2
The open architecture and familiar PC GUI ensure
that the CMA5000a can be updated to meet the
evolving measurement needs of communications
networks.
Two platforms of different sizes coupled with a full
range of measurement modules assure support for
every test requirement. High-performance
measurement of every application cuts the time and
cost of network installation and maintenance.
The CMA5000a features two types of bay adapter to
hold a wide variety of application test modules,
providing unsurpassed flexibility and scalability to
reduce cost.
Small Bay Adapter (SBA)
3
4
5
6
Medium Bay Adapter (MBA)
Features and Benefits
1. Full range of I/O
interfaces including
Ethernet, VGA and
USB 2.0 (4 ports)
2. Large 26.7cm (10.4")
LCD with touch
screen interface
3. Dedicated hard keys
Measurement start/
stop, data recording,
print, help, and more
4. Rotary encoder for
easy and precise
cursor movement
5. 40-GB hard disk and
built-in DVD/CD-R/W
6. LEDs indicating
external power,
battery status and
memory access
Deployment of Service
• Evaluate network
parameters and
maintain network
performance
Deployment of Service
Network Commissioning
DWDM Network Equipment Installation
Physical Medium Characterization
CMA5000a Multi-layer Network Test Platform3/12 Page
Network
Commissioning
• Evaluate network
performance and
reliability
• Speed-up service
rollout
Setting-up DWDM
network equipment
• Set optimum
bandwidth by tuning
DWDM system
Evaluating Physical
layer characteristics
• Easy installation of
network equipment for
evaluating Physical
layer
CMA5000a Specifications
Item
Specification
Platform
SBA: 5000A-150-DC
MBA: 5000A-250-DC
CPU/RAM
733 MHz Celeron/512 MB
Operating System
Windows® XP Pro SP2
Display
10.4” color XGA (1024 x 768) LCD (touch panel)
Hard Disk
40 GB
Media Drive
DVD/CD-R/W
Interface
Audio in/out
VGA Output
USB 2.0 (4 Ports)
10/100 Ethernet
Power
Auto-switching
100 to 240 Vac, 50/60 Hz
150 W
Dimensions and Mass
SBA: 371 (W) x 246 (H) x 140 (D) mm, 5.9 kg
14.6 (W) x 9.7 (H) x 5.5 (D) in 13 lbs
MBA: 371 (W) x 246 (H) x 180 (D) mm, 6.81 kg
14.6 (W) x 9.7 (H) x 7.1 (D) in 15 lbs
Battery No.
SBA: 2 (one battery as standard accessory) *
MBA: 2 (two batteries as standard accessory)
Battery Type
Li-Ion
*: Additional 5000A-BATT Battery may be required depending on module configurations. See "Mainframe and Module
Configuration Guide" for details.
Windows® is a registered trademark of Microsoft Corporation in the USA and other countries.
Celeron® is a registered trademarks of Intel Corporation or its subsidiaries in the USA and other countries
4/12 Page
CMA5000a Multi-layer Network Test Platform
Transmission Equipment and Network
Performance Measurements
The CMA5000a support various transmission equipment and network performance measurements.
Its easy operation coupled with event log and reporting functions make it perfect for field measurements.
GigE II Module: Ethernet (10/100/1000BASE-T, 1000BASE-X)
UTA Module: SDH/SONET (156M to 9953 Mbit/s)
OTN (2.6G, 10.7G, 11.049G, 11.095G)
Ethernet (10GBASE-X, LAN-PHY/WAN-PHY)
XTA Module: SDH/SONET/PDH/DSn (1.5M to 9953 Mbit/s)
Jitter and Wander (1.5M to 2488 Mbit/s)
NGN (1.5M to 2488 Mbit/s)
With a full line of versatile modules, the all-in-one CMA5000a simplifies operation and cuts measurement costs.
Gigabit Ethernet
The GigE II Module is a single unit supporting up to
Gigabit Ethernet measurement with two RJ-45 ports
for 10/100/1000BASE-T and two SFP ports for
1000BASE-X.
Optical 100M interface (100BASE-FX MMF) is also
supported.
Users can identify both network faults and the root
cause using flexible Tx stream generation, received
frame analysis, and ping functions (Tx/Rx, Trace
Route).
Moreover, the GigE II supports quality
measurements of various services using sequence
error, latency, and IP packet jitter measurement
functions. The GigE II module has built-in support
for RFC2544 applications and supports easy
measurement of throughput, latency, and frame loss
as well as back-to-back tests.
The unique BERT function supports line quality
measurement using various data patterns.
Measurement Results of Two Ports with User Adjustable
Thresholds
GigE Module
• Multiple 10/100/
1000BASE-T and
1000BASE-X interfaces
Performance:
• Performance
measurements using
RFC2544 auto test
and powerful report
functions
• Supports multiple
PRBS patterns in
addition to CRPAT for
BERT tests
• Supports remote
measurement using
master/slave function
UTA Module
• Multiple interface units
for SDH/SONET
(156M to 9953 Mbit/s),
OTN (2.6G, 10.7G,
11.1G) and Ethernet
(10GBASE-X,
LANPHY/WAN-PHY)
Performance:
• Choice of required
interface cuts
equipment costs
• ITU-T O.182 random
error generation
supports accurate
measurement of OTN
network performance
• Supports monitoring of
next-generation SDH/
SONET networks up to
9953 Mbit/s
10 Gigabit Ethernet
The dual-size UTA Module supports various 10G
interfaces for LAN-PHY/WAN-PHY 10 Gigabit
Ethernet measurements. Utilizing swappable XFP
modules as optical interfaces make wavelength
switching easy.
Users can identify both network faults and the root
cause using flexible Tx stream generation, received
frame analysis, and ping functions (Tx/Rx) as well
as a capture function with filtering/triggering.
In addition, the UTA module supports various
service quality measurements using sequence error,
latency and IP packet jitter measurement functions.
The RFC2544 application supports measurement of
throughput, latency, and frame loss as well as easy
back-to-back testing.
Analysis of Captured Data
CMA5000a Multi-layer Network Test Platform
Features and Benefits
5/12 Page
Features and Benefits
XTA Module
• Choice of
measurement module
matching required bit
rate, such as
1.5M to 622 Mbit/s
1.5M to 2488 Mbit/s
1.5M to 9953 Mbit/s
(1310 or 1550 nm for
9953 Mbit/s)
Performance:
• Supports PDH/DSn
jitter/wander and NGN
interfaces up to
2488 Mbit/s
• Supports SDH/SONET
measurements up to
9953 Mbit/s
User interface:
• Mapping auto-analysis
SDH/SONET
The dual-size UTA and XTA measurement modules
support SDH/SONET interfaces from 156M to
9953M. In addition to offering various functions,
such as alarm/error measurement, APS
measurement with 125 μs resolution, and return
delay measurement with 100 μs resolution, field
troubleshooting and fault detection are made faster
and easier by search and mapping auto-analysis.
Additionally, installing the optional EoS (Ethernet
over SDH/SONET) function supports nextgeneration SDH/SONET measurements, such as
virtual concatenation, LCAS, and differential delay.
The XTA unit supports ITU-T O.172-compliant PDH/
DSn interfaces and jitter/wander measurements
from 1.5M to 2488 Mbit/s.
Mapping Selection Window
OTN
The UTA Module supports OTN measurements as
an option. It supports OTN 2.6G, 10.7G and 11.1G
interfaces. Forward Error Correction (FEC) is a key
index of OTN performance that the UTA Module can
quantify with high reproducibility using its ITU-T
O.182-compliant error generation function.
CMA Ethernet
Reflector
• Swap function
supporting
10/100/1000BASE-T
and 1000BASE-X
Performance:
• Easy Swap function
• Swap operation at full
wire rate
• Auto negotiation
OTN Error and Alarm Display Showing Each Network Layer
CMA Ethernet Reflector
The CMA Ethernet reflector has
10/100/1000BASE-T and 1000BASE-X ports. It
complements CMA5000a IP/Ethernet
measurements by the function of swapping the
source address and the destination address of the
Ethernet frame.
External View of CMA Ethernet Reflector
6/12 Page
CMA5000a Multi-layer Network Test Platform
Physical Layer Characterization
Features and Benefits
As a leader in optical fiber and network characterization, the CMA 5000a offers all of the test applications
required for comprehensive physical layer characterization, including OTDR, Polarization Mode Dispersion,
Chromatic Dispersion, Loss Test Set and Optical Return Loss. Supplemental tools such as a Visual Fault
Locator and Video Inspection Probe are also available for a complete testing solution.
OTDR
The CMA5000a Optical Time Domain Reflectometer (OTDR) application represents a world-class
measurement solution with the latest in high performance hardware and dedicated, easy to use software.
• High Performance Hardware
To satisfy the most demanding testing requirements,
the CMA5000a series OTDR modules, feature a
multitude of available wavelengths including 850,
1300, 1310, 1383, 1490, 1550 and 1625 nm.
For ultra-long haul systems, the CMA5000a OTDR
modules feature up to 50 dB of dynamic range
(enough to see approximately 250 km of fiber).
• Dedicated, Ease to Use Software
To simplify testing, the CMA5000a features
dedicated testing modes to automate and simplify
the task at hand. FAULT LOCATE mode is designed
for the novice just starting out or someone who only
uses an OTDR occasionally. Simply connect the
fiber and press test, the unit will verify the fiber is
connected correctly, select testing parameters,
execute the test and provide a text response
indicating fault/break location and end to end loss.
For those who have more experience or would like
to perform more advanced testing, STANDARD
OTDR mode allows the user to select all
parameters, compare up to eight traces and even
generate splice loss reports. Cable commissioning
is also automated through the use of
CONSTRUCTION OTDR mode where a wizard
allows the user to select the required testing
wavelengths, number of fibers and file naming
scheme. The wizard then becomes the project
manager guiding the user through the testing and
ensuring consistency with testing parameters,
eliminating user induced errors.
Full fiber characterization with the press of a button.
Optical Fiber Connector Inspection
The Video Inspection Probe (VIP) gives operators a
safe, easy way to analyze and document connector
conditions. Since most optical network failures are
attributed to poor connector quality, the VIP reduces
the installation time and ensures the network is able
to reach its full potential.
Connector images are captured digitally and
displayed on the test set screen. The images can
then be viewed or saved as a variety of common
graphics files for later review or documentation of
connector quality. Various adapters are available to
allow direct viewing of patch cord end faces, as well
as, for viewing of end faces already installed in
patch panels.
Video Inspection Probe displays and captures fiber end face
CMA5000a Multi-layer Network Test Platform
7/12 Page
OTDR
• Dedicated testing modes
to simplify commonly
performed tasks
• Easy to use for any skill
level testing from fault
location to advanced
analysis
• Solutions for all network
types: Metro, CWDM
and ultra-long haul
• Extremely high
resolution for accurate
fiber mapping (0.5
meter resolution at 125
km, 1 meter resolution
at 250 km)
• Superior event analysis
software provides high
accuracy and event
detection capability
• Automated reporting
• Scripting command
support for remote
operation or automated
testing in manufacturing
environments
Features and Benefits
Optical Spectrum
Analysis
• Increased revenue
through accurate
channel
characterization:
±40 pm wavelength
accuracy
±0.4 dB power
accuracy
• Channel Select option
allows users to drop a
wavelength with a flat
top tunable filter
• Easy-to-use - one
button complete
spectral
characterization
• User-defined
configurations for
custom DWDM testing
• Unsurpassed ORR
(Optical Rejection
Ratio)
Polarization Mode
Dispersion
• Removing the autocorrelation peak for
accurate
characterization of all
necessary PMD
parameters: PMD,
length PMD coefficient
and second order PMD
value
• Multiple test modes
including multiple
scans and long term
PMD testing
• All band testing
• Highest dynamic range
on the market: 55 dB
with standard light
source and more than
64 dB with the high
power source
• Fast measurement
time: less than 8
seconds
• Able to test through
multiple EDFAs
DWDM Network Equipment
The OSA applications lower CWDM and DWDM
installation and maintenance costs by providing
industry leading spectral analysis of system critical
parameters. Operating from 1250 to 1650 nm, these
OSA modules for the CMA5000a are the tools for
testing large wavelength range CWDM system.
The OSA provides laboratory grade specifications in
a rugged field module and is ideal for critical
measurements on DWDM systems.
With the tightest wavelength spacing and best ORR
& OSNR available in a field package, it quickly and
accurately identifies problems with source drift,
output stability and optical amplifier operation. In
addition, it features a unique flat-topped narrow
band filter that can be used to drop a single channel
(at speeds up to 40 Gbit/s) from the DWDM network
for detailed transport testing.
Complete channel analysis including wavelength (or
frequency), power, OSNR and system gain tilt for balancing
your network
Polarization Mode Dispersion (PMD)
By performing complete PMD Characterization of
your high data-rate networks, the CMA5000a PMD
application helps optimize throughput and increase
revenue. Its simple, one-button operation allows
installers, carriers and system providers alike to
release the full potential of their high line rate
network spans.
The unique pi-shifted interferometric technique
provides high accuracy and high dynamic ranges
with a standard light source. This high performance
module achieves tests through multiple EDFAs,
reduces testing time by fast measurements,
exceptional ease of use and covers all wavelength
bands. It is fully compliant with TIA/EIA FOTP-124
and IEC60793-1-48 standards.
Determine if your fiber link meets PMD requirements
8/12 Page
CMA5000a Multi-layer Network Test Platform
Chromatic Dispersion
The field portable CMA5000a OTDR/Chromatic
Dispersion (CD-OTDR) measurement system is a
dedicated module that combines the advanced
capabilities of Anritsu’s OTDR technology with
Anritsu’s experience in Chromatic Dispersion.
The CMA5000a CD-OTDR measurement system
gives installers and network providers a combined
module that can be used as an OTDR and a
chromatic dispersion measurement system,
reducing testing times while increasing network
performance.
The CMA5000a CD-OTDR measurement system is
based upon the industry accepted time-of-flight
measurement method (FOTP-168) that can evaluate
chromatic dispersion of individual fiber links.
Utilizing a single fiber for the test and multiple
wavelengths, results in an increase in the accuracy
of the measurement, as well as, a reduction in the
testing time. This translates into improved network
performance and efficiency, resulting in increased
revenue for the network provider.
Anritsu understands how valuable your time is, so
we provide intuitive, easy-to-use setup menus and
single-button operation. The CMA5000a CD-OTDR
measurement system has been designed to provide
optimal test efficiency to facilitate quicker turn-up of
services and reduce the cost of testing.
The combined unit has an auto-test feature that will
determine the optimum settings. In addition, intuitive
setup menus guide the user through a few minor
settings to minimize the testing and setup times.
Features and Benefits
Highly Accurate CD Measurement Using FOTP-168 Method
Module Specifications
Module
Measurement
Platform
Bay
UTA
Network performance measurement
10G Ethernet LAN-PHY, WAN-PHY
SONET (optical) OC3/12/48/192
SDH (optical) STM1/4/16/64
OTU1/2
SBA, MBA
2
GIGE II
Gigabit Ethernet performance measurement
10/100/1000 M Ethernet
SBA, MBA
1
XTA
SONET/SDH performance measurement
DS1 to OC192/STM64
Jitter and Wander (up to 2.5G)
SBA, MBA
2
OSA
Optical spectrum analysis
DWDM channel selection
MBA
4
OTDR
Optical Time Domain Reflectometer
SBA, MBA
1
PMD
Polarization mode dispersion measurement
MBA
4
CD-OTDR
Wavelength dispersion measurement
Optical pulse test
SBA, MBA
1
See each module data sheet for detailed configurations.
CMA5000a Multi-layer Network Test Platform
9/12 Page
Increased revenue
through optimal CD
compensation:
• Measurement accuracy
of 1% facilitates
optimal compensation
of CD and slope for
increased channel
count and data rate
Added value through
performance:
• Dispersion, dispersion
slope, λ0 and spectral
attenuation for all fiber
types
Reduced cost of
measurement:
• Extremely short test
time – seconds per
fiber
• Easy-to-use,
automated software
with one button
operation
Ordering Information
Please specify the model/order number, name and quantity when ordering.
The names listed in the chart below are Order Names. The actual name of the item may differ from the Order Name.
Model/Order No.
Description
Main frame
5000A-150-DC-xx
SBA main frame featuring two bays
5000A-250-DC-xx
MBA main frame featuring four bays
xx: Choose the accessory power cable from following:
IT: Italy; SW: Switzerland; AU: Australia; EU: Europe; UK: Great Britain,
US: USA, Japan
Accessories
5000A-AC
replacement AC Adapter
CORD-C5-xx
replacement Power cable (xx: cable connector type)
STYLUS-3PK
replacement Touch panel stylus
5000A-OPMAN
replacement Quick Start Guide
Application Parts
5000A-BATT
Additional Battery
USB-KEYBD-US
USB English keyboard with trackball
5000A-HCASE-SBA
Hard case for SBA main frame
5000A-HCASE-DLX
Hard case for SBA/MBA main frame with extra module capacity
5000A-SCASE
Soft case for SBA/MBA main frame
10/12 Page
CMA5000a Multi-layer Network Test Platform
Note
CMA5000a Multi-layer Network Test Platform
11/12 Page
Specifications are subject to change without notice.
Anritsu Corporation
5-1-1 Onna, Atsugi-shi, Kanagawa, 243-8555 Japan
Phone: +81-46-223-1111
Fax: +81-46-296-1264
• U.S.A.
Anritsu Company
1155 East Collins Blvd., Suite 100, Richardson,
TX 75081, U.S.A.
Toll Free: 1-800-267-4878
Phone: +1- 972-644-1777
Fax: +1-972-671-1877
• Canada
Anritsu Electronics Ltd.
700 Silver Seven Road, Suite 120, Kanata,
Ontario K2V 1C3, Canada
Phone: +1-613-591-2003
Fax: +1-613-591-1006
• Brazil
Anritsu Eletrônica Ltda.
Praca Amadeu Amaral, 27 - 1 Andar
01327-010-Paraiso-São Paulo-Brazil
Phone: +55-11-3283-2511
Fax: +55-11-3288-6940
• Mexico
Anritsu Company, S.A. de C.V.
Av. Ejército Nacional No. 579 Piso 9, Col. Granada
11520 México, D.F., México
Phone: +52-55-1101-2370
Fax: +52-55-5254-3147
• U.K.
Anritsu EMEA Ltd.
200 Capability Green, Luton, Bedfordshire, LU1 3LU, U.K.
Phone: +44-1582-433200
Fax: +44-1582-731303
• France
• Italy
• Singapore
Via Elio Vittorini 129, 00144 Roma, Italy
Phone: +39-6-509-9711
Fax: +39-6-502-2425
60 Alexandra Terrace, #02-08, The Comtech (Lobby A)
Singapore 118502
Phone: +65-6282-2400
Fax: +65-6282-2533
Anritsu S.p.A.
Anritsu Pte. Ltd.
• Sweden
Anritsu AB
• India
• Finland
3rd Floor, Shri Lakshminarayan Niwas, #2726,
HAL 3rd Stage, Bangalore - 560 038, India
Phone: +91-80-4058-1300
Fax: +91-80-4058-1301
Borgafjordsgatan 13, 164 40 KISTA, Sweden
Phone: +46-8-534-707-00
Fax: +46-8-534-707-30
Anritsu AB
Teknobulevardi 3-5, FI-01530 VANTAA, Finland
Phone: +358-20-741-8100
Fax: +358-20-741-8111
• Denmark
Anritsu A/S
Kirkebjerg Allé 90, DK-2605 Brøndby, Denmark
Phone: +45-72112200
Fax: +45-72112210
• Spain
Anritsu EMEA Ltd.
Oficina de Representación en España
Edificio Veganova
Avda de la Vega, n˚ 1 (edf 8, pl 1, of 8)
28108 ALCOBENDAS - Madrid, Spain
Phone: +34-914905761
Fax: +34-914905762
• Russia
Anritsu EMEA Ltd.
Representation Office in Russia
Tverskaya str. 16/2, bld. 1, 7th floor.
Russia, 125009, Moscow
Phone: +7-495-363-1694
Fax: +7-495-935-8962
• Germany
P O Box 500413 - Dubai Internet City
Al Thuraya Building, Tower 1, Suit 701, 7th Floor
Dubai, United Arab Emirates
Phone: +971-4-3670352
Fax: +971-4-3688460
Nemetschek Haus, Konrad-Zuse-Platz 1
81829 München, Germany
Phone: +49-89-442308-0
Fax: +49-89-442308-55
Anritsu Company Ltd.
Units 4 & 5, 28th Floor, Greenfield Tower, Concordia Plaza,
No. 1 Science Museum Road, Tsim Sha Tsui East,
Kowloon, Hong Kong
Phone: +852-2301-4980
Fax: +852-2301-3545
• P.R. China (Beijing)
Anritsu Company Ltd.
Beijing Representative Office
Room 2008, Beijing Fortune Building,
No. 5, Dong-San-Huan Bei Road,
Chao-Yang District, Beijing 100004, P.R. China
Phone: +86-10-6590-9230
Fax: +86-10-6590-9235
• Korea
Anritsu Corporation, Ltd.
8F Hyunjuk Building, 832-41, Yeoksam Dong,
Kangnam-ku, Seoul, 135-080, Korea
Phone: +82-2-553-6603
Fax: +82-2-553-6604
Anritsu Pty. Ltd.
• United Arab Emirates
Anritsu GmbH
• P.R. China (Hong Kong)
• Australia
Anritsu S.A.
16/18 avenue du Québec-SILIC 720
91961 COURTABOEUF CEDEX, France
Phone: +33-1-60-92-15-50
Fax: +33-1-64-46-10-65
Anritsu Pte. Ltd.
India Branch Office
Anritsu EMEA Ltd.
Dubai Liaison Office
Unit 21/270 Ferntree Gully Road, Notting Hill,
Victoria 3168, Australia
Phone: +61-3-9558-8177
Fax: +61-3-9558-8255
• Taiwan
Anritsu Company Inc.
7F, No. 316, Sec. 1, Neihu Rd., Taipei 114, Taiwan
Phone: +886-2-8751-1816
Fax: +886-2-8751-1817
Please Contact:
080929
Printed on Recycled Paper
Catalog No. CMA5000a-E-A-1-(3.00)
Printed in Japan
2008-12 PSD
Module Configuration Guide
CMA5000a
Multi Layer Network Platform
Mainframe and Module Configuration Guide
This guide describes possible combinations of the CMA5000a mainframe and
modules.
The all-in-one CMA5000a Multi Layer Network Platform supports cost-effective
network installation and maintenance measurements.
Mainframe
There are two models of CMA5000a mainframe—the SBA (Single Bay
Adapter), and the MBA (Medium Bay Adapter), each offering different numbers
of bays as shown below.
SBA (2 bays)
MBA (4 bays)
Measurement Modules
Various modules for testing the physical and transport layers can be
simultaneously installed in the CMA5000a.
Measurement Modules
Popular
Name
Bay
Product Number
Description
ORL or
Test Fiber
1
520-ORL-XX
OPTION-55X-TFMXX
High-accuracy location of optical fiber breaks
OTDR
1
52XX-000-OTDR-XXX
Reflection measurement showing cut or bend of optical
fibers
CD-OTDR
1
5302-21-CDOTDR-XXX
Chromatic dispersion measurement
GigE-II
1
5710-000-GIGE
GigE
2
5700-000-GIGE
10 GigE
2
5800-000-10GIGE
UTA
2
5610-000-UTA
2.5G XTA
2
5616-000-XTA
10G XTA
2
566X-000-XTA
622M XTA
J&W
2
5604-000-XTA
2.5G XTA
J&W
2
5616-301-XTA or 5616-311-XTA
1.5M to 2.5G Jitter wander measurement
2.5G XTA
NGN
2
5616-601-XTA or 5616-611-XTA
156M to 2.5G GFP, LCAS, VCAT
OSA
400/425
4
55XX-X00-OSA-XXX
Optical spectrum measurement
PMD 160
4
5400-001-PMD-XX
Polarization mode dispersion measurement
http://www.anritsu.com
Transmission quality measurement for 10, 100 and
Gigabit Ethernet
Transmission quality measurement for 10, 100 and
Gigabit Ethernet
Transmission quality measurement for 10 Gigabit
Ethernet
Transmission quality measurement for 10 Gigabit
Ethernet, 156M to 10G SDH/SONET and OTU1/2
Transmission quality measurement for 1.5M to 2.5G
PDH/SDH/SONET
Transmission quality measurement for 1.5M to 10G
PDH/SDH/SONET
Transmission quality measurement for 1.5M to 622M
PDH/SDH/SONET including jitter and wander
5-1-1 Onna, Atsugi-shi, Kanagawa, 243-8555
Phone : +81 46 223-1111
CMA5000a-E-Z-1-(1.00) 2008-12 PSD
Available Configurations
The charts below describe available configurations for mainframes (SBA and MBA)
and measurement modules.
CMA5000a One-Module Configuration
Module
(Alone)
ORL or
Test Fiber
ALL
O TDR
ALL
CD-O TDR
ALL
GigE-II
ALL
GigE
ALL
10 GigE
ALL
UTA
ALL
Note
Supported Mode ls
ALL
All models
S-2
SBA with an additional battery (5000A-BATT)
MBA
M
MBA
2.5G XTA
ALL
NO
Not supported
10G XTA
S-2
622M XTA
J&W
S-2
2.5G XTA
J&W
S-2
2.5G XTA
NGN
S-2
OSA
400/425
M
PMD 160
M
CMA5000a Two-Module Configuration
Module
ORL or
Test Fiber
OTDR
CD-OTDR
G igE-II
GigE
10 GigE
UTA
2.5G XTA
10G XTA
ORL or
Test Fiber
ALL
ALL
ALL
ALL
M
M
M
M
M
M
M
M
OTDR
ALL
ALL
S-2
ALL
M
M
M
M
M
M
M
M
CD-OTDR
ALL
S-2
S-2
ALL
M
M
M
M
M
M
M
M
GigE-II
ALL
ALL
ALL
ALL
M
M
M
M
M
M
M
M
GigE
M
M
M
M
M
M
M
M
M
M
M
M
10 GigE
M
M
M
M
M
M
M
M
M
M
M
M
UTA
M
M
M
M
M
M
M
M
M
M
M
M
2.5G XTA
M
M
M
M
M
M
M
M
M
M
M
M
10G XTA
M
M
M
M
M
M
M
M
M
M
M
M
622M XTA
J&W
M
M
M
M
M
M
M
M
M
NO
NO
NO
2.5G XTA
J&W
M
M
M
M
M
M
M
M
M
NO
NO
NO
2.5G XTA
NGN
M
M
M
M
M
M
M
M
M
NO
NO
M
http://www.anritsu.com
622M XTA 2.5G XTA
J&W
J&W
2.5G XTA
NGN
5-1-1 Onna, Atsugi-shi, Kanagawa, 243-8555
Phone : +81 46 223-1111
CMA5000a-E-Z-1-(1.00) 2008-12 PSD
CMA5000a Three-Module Configuration
Module
ORL or
Test Fiber
OTDR
CD-OTDR
GigE-II
GigE
10 GigE
UTA
2.5G XTA
10G XTA
622M XTA
J&W
2.5G XTA
J&W
2.5G XTA
NGN
ORL or
ORL or
Test Fiber Test Fiber
M
M
M
M
M
M
M
M
M
M
M
M
ORL or
Test Fiber
M
M
M
M
M
M
M
M
M
M
M
M
ORL or
CD-OTDR
Test Fiber
M
M
M
M
M
M
M
M
M
M
M
M
ORL or
Test Fiber
GigE-II
M
M
M
M
M
M
M
M
M
M
M
M
OTDR
OTDR
M
M
M
M
M
M
M
M
M
M
M
M
OTDR
CD-OTDR
M
M
M
M
M
M
M
M
M
M
M
M
OTDR
GigE-II
M
M
M
M
M
M
M
M
M
M
M
M
CD-OTDR CD-OTDR
M
M
M
M
M
M
M
M
M
M
M
M
CD-OTDR
GigE-II
M
M
M
M
M
M
M
M
M
M
M
M
GigE-II
GigE-II
M
M
M
M
M
M
M
M
M
M
M
M
OTDR
CMA5000a Four-Module Configuration
ORL or
ORL or
ORL or
O RL or
Test Fiber Test Fiber Test Fiber Test Fiber
OTDR
O TDR
OTDR
CD-OTDR
CD-OTDR
GigE-II
ORL or
Test Fiber
OTDR
CD-OTDR
GigE-II
OTDR
CD-O TDR
GigE -II
CD-OTDR
GigE-II
GigE-II
ORL or
ORL or
Test Fiber Test Fiber
M
M
M
M
M
M
M
M
M
M
ORL or
Test Fiber
M
M
M
M
M
M
M
M
M
M
ORL or
CD-OTDR
Test Fiber
M
M
M
M
M
M
M
M
M
M
ORL or
Test Fiber
GigE-II
M
M
M
M
M
M
M
M
M
M
OTDR
OTDR
M
M
M
M
M
M
M
M
M
M
OTDR
CD-OTDR
M
M
M
M
M
M
M
M
M
M
OTDR
GigE-II
M
M
M
M
M
M
M
M
M
M
CD-OTDR CD-OTDR
M
M
M
M
M
M
M
M
M
M
CD-OTDR
GigE-II
M
M
M
M
M
M
M
M
M
M
GigE-II
GigE-II
M
M
M
M
M
M
M
M
M
M
Modu le
OTDR
http://www.anritsu.com
5-1-1 Onna, Atsugi-shi, Kanagawa, 243-8555
Phone : +81 46 223-1111
CMA5000a-E-Z-1-(1.00) 2008-12 PSD