Alcatel-Lucent OmniAccess Wireless LAN Access Point Family

Alcatel-Lucent OmniAccess
Wireless LAN Access Point Family
OAW-AP41, OAW-AP60, OAW-AP61, OAW-AP65,
OAW-AP70, OAW-AP80
Alcatel-Lucent OmniAccess
access points (APs) are small,
lightweight and can be securely
deployed in a variety of locations
such as on walls, cubicles,
desktops, and in the ceiling.
The AP antenna diversity allows
for the best possible signal
processing using dual,
omni-directional antennas.
2
Alcatel-Lucent | OmniAccess AP
Alcatel-Lucent OmniAccess access points (APs) are small,
lightweight and can be securely deployed in a variety of locations
such as on walls, cubicles, desktops, and in the ceiling. The AP
antenna diversity allows for the best possible signal processing
using dual, omni-directional antennas.
Alcatel-Lucent OmniAccess APs work with the Alcatel-Lucent OmniAccess 6000, OmniAccess 4324,
OmniAccess 4308, and OmniAccess 4304 to provide a high performance, centrally managed, wireless
mobility solution for enterprises. Alcatel-Lucent OmniAccess APs have an extended lifespan because
they can automatically configure themselves across any L2/L3 network using a discovery protocol,
allowing easy upgrades when new features, capabilities, or standards emerge.
T h i n A P A rc h i t e c t u re
Alcatel-Lucent OmniAccess APs function as “thin” APs which provide 802.11a/b/g user
access, but are not overburdened with processing-intensive functions. These fuctions, such
as wireless user authentication, link layer encryption, VPN termination, and upper layer
MAC (media access control) services are better suited and handled by Alcatel-Lucent
OmniAccess WLAN switches. This makes Alcatel-Lucent OmniAccess APs cost-effective and
simple to deploy and manage. Alcatel-Lucent's APs can simultaneously service wireless
users and act as wireless monitoring devices eliminating the need for a separate overlay of
RF sensors to troubleshoot and optimize the wireless environment.
Moving these functions into a centrally-located Alcatel-Lucent
OmniAccess WLAN system gives administrators greater control
over the entire system including better scalability, higher
performance, and easier system-wide changes as standards
and security schemes change. Additional benefits include
better support for roaming and low-latency (sub 5 millisecond)
handoffs between APs – making the Alcatel-Lucent
OmniAccess WLAN system ideal for handling delay-sensitive
applications such as voice over wireless.
Alcatel-Lucent | OmniAccess AP
3
ADAPTIVE RF MANAGEMENT (ARM), RF PLANNING, DYNAMIC
C A L I B R AT I O N , A N D A D VA N C E D T R O U B L E S H O O T I N G
With previous generations of WLAN technology,
AP deployment was an expensive proposition.
Corporations had to painstakingly
undertake extensive RF planning,
complete site surveys, climb into ceilings
to run new cabling, and mount the APs.
In turn, APs were deployed sparingly.
Alcatel-Lucent OmniAccess APs change
this deployment model through
Adaptive Radio Management (ARM)
technology that negates the need for
detailed RF planning.
To ease implementation, the Alcatel-Lucent
IT staff can import floor plans and automatically
OmniAccess Wireless system combines online
determine the placement of APs and air monitors.
RF planning tools and ARM for fine-tuning,
Once the network is deployed, administrators can
automated performance and capacity
use ARM to automatically perform system-wide
optimization. The Alcatel-Lucent OmniAccess
calibration, determine the actual propagation
RF planning gives administrators the power to
characteristics of RF signals, and set AP transmit
quickly provision APs based on coverage,
power and channel assignments to desired levels.
performance or resiliency requirements.
4
Alcatel-Lucent | OmniAccess AP
In addition, the Alcatel-Lucent OmniAccess Wireless system uniquely
provides automatic tuning of the mobile environment through
sophisticated system calibration and distributed, radio resource
allocation technologies.
ARM and Alcatel-Lucent OmniAccess Aps constantly
scan the ambient radio environment to determine
coverage holes, interference, and congestion. If
discovered, Alcatel-Lucent OmniAccess APs
automatically change channel assignment or power
transmit levels to ensure optimal operation and
report these changes back to the WLAN switch. In
the event of a failure, the OmniAccess WLAN system
automatically alters adjacent AP settings to ensure
no loss of WLAN service occurs.
For manual troubleshooting, Alcatel-Lucent
OmniAccess APs support packet capture and
provide wireless RMON capabilities, letting
administrators quickly diagnose and resolve
wireless problems.
Alcatel-Lucent | OmniAccess AP
5
ZERO CONFIGURATION, PLUG-AND-PLAY DEPLOYMENT
Alcatel-Lucent OmniAccess APs are completely
plug-and-play, requiring no manual configuration.
6
Alcatel-Lucent | OmniAccess AP
Alcatel-Lucent OmniAccess APs can
The WLAN switch automatically
be attached to any existing Ethernet
configures each OmniAccess AP
switch or IP router and across any
based on the policies and
subnet boundary. Once connected,
configurations set by the
the APs self configure by
administrator. This automation
automatically building a secure IP
dramatically simplifies operation
(GRE or IPSec) tunnel to the Alcatel-
and eliminates the need for
Lucent OmniAccess WLAN switch.
reconfiguring the existing network.
UNPARALLELED SECURITY
Acting as an air monitor, the Alcatel-Lucent OmniAccess APs deliver
100 Mbps of intrusion analysis and relays alerts back to the
OmniAccess WLAN switch. Alcatel-Lucent OmniAccess APs detect and
thwart rogue APs and wireless intrusions such as DoS and man-inthe-middle attacks.
Since the OmniAccess WLAN switch manages Alcatel-Lucent’s
OmniAccess APs, no critical configuration information – such
as passwords, encryption keys, or digital certificates – is
stored on the APs. If APs are lost or stolen, no sensitive
information can be obtained.
Conventional WLAN systems decrypt wireless traffic at the AP and store electronic keys derived from
the requisite exchanges performed between the client and the authentication server of each AP. Local
storage of this information poses serious security risks for large corporations if an access point is lost or
stolen, or if a fake AP or man-in-the-middle attack is launched.
Remote office security policies are centrally defined and
enforced. In addition, like all Alcatel-Lucent OmniAccess
APs, secure remote APs simply appear as another AP on the
system and have the same features and functions, which
are centrally managed by Alcatel-Lucent OmniAccess
WLAN switches.
Alcatel-Lucent | OmniAccess AP
7
SECURE REMOTE OFFICE DEPLOYMENT
Alcatel-Lucent OmniAccess APs can be securely deployed in a
remote office, letting network managers easily extend their
corporate 802.1X framework across the Internet.
Alcatel-Lucent OmniAccess APs use the industry standard IPSec
protocol to create secure tunnels that connect APs to a central
OmniAccess WLAN switch. Tunneling traffic inside IPSec
prevents an attacker from intercepting messages between the
switch and AP, allows APs to be deployed across an un-trusted
network, and enables an AP to be deployed with a network
address translation (NAT) device between the AP and switch.
ADVANCED WIRELESS CAPABILITIES
The Alcatel-Lucent OmniAccess WLAN system supports a host of advanced
functionality to enable latency-sensitive applications.
For example, Alcatel-Lucent OmniAccess APs work in
conjunction with the WLAN switches to support voiceaware scanning. When a voice session is detected, this
feature ensures that the voice call is given priority service.
The Alcatel-Lucent OmniAccess WLAN system offers
many other unique capabilities for optimizing the wireless
environment such as setting user thresholds per AP,
defining and enforcing bandwidth contracts per user or
user group, and the ability to broadcast up to eight
discrete SSIDs per radio. Granular controls over the APs
let administrators enable AP and client DoS protection,
set channel scan times and frequencies and control
beacon periods, RTS thresholds, SSID availability, DTIM
periods, and maximum client levels.
8
Alcatel-Lucent | OmniAccess AP
The Alcatel-Lucent OmniAccess AP Family
ALCATEL-LUCENT OMNIACCESS AP41
The Alcatel-Lucent OmniAccess AP41 is a single radio, multi-band (802.11 a/b/g)
thin access point.
The OmniAccess AP41 has an internal antenna and can be
deployed via wall jacks in the user space. It is powered by
standards compliant PoE (power-over-Ethernet). The
OmniAccess AP41 is designed for cost-sensitive applications
below the ceiling and is ideal for dense deployments in user
space serving a mix of 802.11 a, b and g clients. The
OmniAccess AP41
OmniAccess AP41 is also well suited for WiFi deployments
in the home, retail, and branch office.
ALCATEL-LUCENT OMNIACCESS AP60 AND AP61
The Alcatel-Lucent OmniAccess AP60 and AP61 (OAW-AP60 and OAW-AP61)
are single radio, 802.11a or b/g access points (APs) designed for dense
wireless deployments.
The Alcatel-Lucent OAW-AP60 and OAW-AP61 deliver
superior capacity, performance, and coverage.
Controlled by Alcatel-Lucent OmniAccess WLAN switches,
the software-programmable OAWAP60 and OAW-AP61 are
able to act as wireless access devices, RF monitors, or both
simultaneously. The OAW-AP60 and OAW-AP61 eliminate
OmniAccess AP60
the primary obstacle to dense deployments – the high cost
of installing and managing APs in the ceiling. The OAWAP60 and OAW-AP61 can be connected to existing network
ports and wall or desk mounted. With significantly lower
cost-to-deploy APs, more companies can implement a
performance-based enterprise WLAN.
OmniAccess AP61
Alcatel-Lucent | OmniAccess AP
9
ALCATEL-LUCENT OMNIACCESS AP65
The Alcatel-Lucent OmniAccess AP65 (OAW-AP65) is Alcatel-Lucent’s
smallest, dual-radio thin architecture access point that provides concurrent
operation of 802.11a and 802.11b/g services.
Designed for use exclusively with OmniAccess WLAN
switches, with its rear mounted Ethernet interface and
integrated ceiling tile rail mounting point, the OAW-AP65
self contained, low-profile design is ideally suited for
discrete deployment applications. The OAW-AP65 is a
multi-purpose device that functions both as an access
point and as an RF monitor – either independently or
OmniAccess AP65
concurrently – across the 2.4 GHz and 5 GHz spectrums.
The OAW-AP65 supports an integral high-gain antenna
for maximum multi-band coverage.
ALCATEL-LUCENT OMNIACCESS AP70
The Alcatel-Lucent OmniAccess AP70 (OAW-AP70) is a dual-radio access
point that provides concurrent operation of 802.11a and 802.11b/g services.
The OAW-AP70 is a multi-purpose device that can
function both as an access point and as an RF monitor –
independently or concurrently – across the 2.4 GHz and 5
GHz spectrums. Ideally suited for workspace deployment,
OmniAccess AP70
the OAW-AP70 can be securely wall or desk-mounted.
ALCATEL-LUCENT OMNIACCESS AP80M
The Alcatel-Lucent OmniAccess AP80M (OAW-AP80M) is the ideal
wireless solution for harsh outdoor environments where conventional
Wi-Fi access points cannot be deployed.
The OAW-AP80M is a dual-radio 802.11a/b/g access
point that also supports wireless air monitoring capability.
Designed for extreme, all-weather deployment (such as
extreme heat, cold, rain), the OAW-AP80M operates as a
“thin” AP, fully controlled and managed an OmniAccess
WLAN switch. The OAW-AP80M’s flexible design supports a
variety of attachable antennas and supports an integrated
OmniAccess AP80M
PPP over Ethernet client for remote deployments over
service provider networks.
10
Alcatel-Lucent | OmniAccess AP
P R O D U C T F E AT U R E S A N D B E N E F I T S
ALCATEL-LUCENT OMNIACCESS AP41
Remote AP for home office/low-cost deployments
n
Supports 802.11a or b/g
n
Configurable as AP, air monitor, or both
simultaneously
n
Internal omni-directional high-gain antennas
with 180-degree rotation
n
802.3af-compliant power-over-Ethernet (PoE)
ALCATEL-LUCENT OMNIACCESS AP60 AND AP61
Indoor enterprise deployments with single radio usage requirements
n
Supports 802.11a or b/g
n
802.3af-compliant power over Ethernet (PoE)
n
Two RP-SMA connectors for support of a wide
n
Configurable as AP, air monitor, or both
variety of detachable antennas (OAW-AP60)
n
simultaneously
Two integral tri-band omni-directional high-
n
Plenum rated
gain antennas with 90-degree movement
n
Kensington lock interface
(OAW-AP61)
n
Antenna diversity
Alcatel-Lucent | OmniAccess AP
11
P R O D U C T F E AT U R E S A N D B E N E F I T S
ALCATEL-LUCENT OMNIACCESS AP65
Indoor enterprise deployments with aesthetic/discreetness requirements with multi-radios
n
Supports 802.11a or b/g
n
Plenum rated
n
Two integral tri-band omni-directional high-
n
Kensington lock interface
gain antennas with 90-degree movement
n
Antenna diversity
n
802.3af-compliant power-over-Ethernet (PoE)
n
Configurable as AP, air monitor, or both
simultaneously
ALCATEL-LUCENT OMNIACCESS AP70
Indoor enterprise deployments with flexibility and multi-radio usage requirements
n
Concurrent support for 802.11a and
n
802.11b/g services
n
n
Additional USB port for future-proofed
expandability and flexible service expansion
Two integral omni-directional high-gain
n
802.3af compliant power over Ethernet (PoE)
antennas with 180-degree rotation
n
Configurable as AP, RF monitor or both
Four RP-SMA connectors (2 x 2.4 GHz, 2 x 5
simultaneously
GHz) for support of a wide variety of
n
Plenum rated
detachable antennas
n
Kensington lock interface
ALCATEL-LUCENT OMNIACCESS AP80
Harsh outdoor or industrial environments
n
Concurrent support for 802.11a and
n
External power injector
802.11b/g services
n
Configurable as AP, RF monitor or both
n
External N-type connectors
n
Additional USB port for future-proofed
expandability and flexible service expansion
12
Alcatel-Lucent | OmniAccess AP
simultaneously
n
Kensington lock interface
Technical Specifications
Antenna Specifications
Radio Specifications
OAW-AP41 INTEGRAL
• Single, integral, tri-band, omni-directional
antenna with articulating movement.
• Non-detachable
802.11A
Antenna Specifications
Gain:
• 2.4-2.5 GHz / 2.11 dBi
• 4.900 GHz ~ 5.850 GHz / 2.07 dBi
• VSWR 1.5:1
OAW-AP60 EXTERNAL
• Dual, diversity supporting reverse polarity
SMA (RP-SMA) detachable antenna interfaces
suitable for single or tri-band detachable
antennas of various pattern types and gains.
OAW-AP61 INTEGRAL
• An integral, diversity-supporting dual, tri-band
omni-directional high-gain antenna with 90º
degrees movement.
OAW-AP61 Integral antenna gain:
• 2.4-2.5 GHz: 2.8dBi
• 5.150-5.350 GHz: 3.9dBi
• 5.6 GHz: 4 dBi
OAW-AP65 INTEGRAL
• Dual, integral, tri-band, high-gain,
omni-directional antennas with 180 degrees
rotational movement. Non-detachable.
Antenna Specifications
Gain:
• 2.4-2.5 GHz / 3.30 dBi
• 5.150 GHz / 2.50 dBi
• 5.350 GHz / 3.30 dBi
• VSWR 1.5:1
• Support for radio signal diversity
OAW-AP70 INTEGRAL
• An integral, diversity-supporting dual, tri-band
omni-directional high-gain antenna with 180º
degrees movement.
OAW-AP70 Integral antenna gain:
• 2.4-2.5 GHz: 4.46 dBi
• 5.150 GHz: 7.21 dBi
• 5.350 GHz: 6.49 dBi
• 5.850 GHz: 5.23 dBi
OAW-AP70 EXTERNAL
• Quad (2 x 2.4GHz and 2 x 5GHz), diversity
supporting reverse polarity SMA (RP-SMA)
antenna interfaces suitable for a wide array
of detachable antennas of various pattern
types and gains.
OAW-AP80
• None. External N-type antenna interfaces
provided (see interfaces electrical)
Frequency bands
• 5.150 ~ 5.250 GHz (lower band): 4 channels
(for OAW-AP61 and OAW-AP70 only)
• 5.250 ~ 5.350 GHz (middle band): 4channels
• 5.500 ~ 5.700 GHz (ETSI band): 11 channels
(for OAW-AP70 only)
• 5.725 ~ 5.825 GHz (higher band): 4 channels
Radio technology
• Orthogonal frequency division multiplexing
(OFDM)
•
•
•
•
Modulation type
BPSK
QPSK
16-QAM
64-QAM
Transmit power
• Configurable by system administrator
/ professional installer
MAC
• CSMA/CA with ACK
Operating channels
• US and Canada: 8 external antenna / 12
internal antenna
• ETSI: up to19 for OAW-AP70, 13 for
OAWAP60 and AP61
• Japan: 4 for OAW-AP70, 5 for OAW-AP61
(unavailable on OAW-AP60)
Data rates
• 6, 9, 12, 18, 24, 36, 48, 54 Mbps per channel
802.11b
Frequency bands
• 2.4 ~ 2.483 GHz (US, Canada and ETSI)
• 2.4 ~ 2.497 GHz (Japan)
Radio technology
• Direct sequence spread spectrum (DSSS)
Modulation type
• CCK, BPSK, QPSK
Transmit power
• Configurable by system administrator
MAC
• CSMA/CA with ACK
Operating channels
• US and Canada: 11
• ETSI: 13
• Japan: 14 (13 for OAW-AP60)
Data rates
• 1, 2, 5.5, 11 Mbps per channel
Alcatel-Lucent | OmniAccess AP 13
802.11g
Frequency bands
• 2.412 ~ 2.462 GHz (USA, Canada)
• 2.412 ~ 2.472 GHz (ETSI)
• 2.412 ~ 2.484 GHz (Japan)
Radio technology
• OFDM
Modulation type
• CCK, BPSK, QPSK, 16-QAM, 64-QAM
Transmit power
• Configurable by system administrator
MAC
• CSMA/CA with ACK
Operating channels
• US and Canada: 11
• ETSI: 13
• Japan: 14
Data rates
6, 9, 12, 18, 24, 36, 48, 54 Mbps per channel
OAW-AP41
RADIO SPECS 5GHZ – IEEE 802.11A
Frequency Bands Supported
• 5.150 ~ 5.250 GHz (low band),
country specific
• 5.250 ~ 5.350 GHz (mid band),
country specific
• 5.470 ~ 5.725 GHz (Europe),
country specific
• 5.725 ~ 5.825/5.850 GHz (high band),
country specific
Radio technology
• Orthogonal frequency division
multiplexing (OFDM)
Modulation type
• BPSK, QPSK, 16-QAM, 64-QAM
Transmit power
• Configurable by system administrator /
professional installer
MAC
• CSMA/CA with ACK
Operating channels:
• US, Canada – 13
• ETSI – up to 19
• Japan – 8
Data rates
• 6, 9, 12, 18, 24, 36, 48, 54 Mbps per channel
Multi-mode radio band
• 802.11a or 802.11b/g selectable via software
RADIO SPECS 2.4GHZ - IEEE 802.11B
Frequency Bands Supported
• 2.400 ~ 2.4835/2.497 GHz (Global),
channels country specific
Radio technology
• Direct sequence spread spectrum (DSSS)
Modulation type
• CCK, BPSK, QPSK
Transmit power
• Configurable by system administrator
MAC
• CSMA/CA with ACK
Operating channels
• US, Canada – 11
• ETSI – 13
• Japan – 13
Data rates
• 1, 2, 5.5, 11 Mbps per channel
Multi-mode radio band
• 802.11a or 802.11b/g selectable via
software
RADIO SPECS 2.4GHZ - IEEE 802.11G
Frequency Bands Supported
• 2.400 ~ 2.4835 GHz (Global), channels
country specific
Radio technology
• Orthogonal frequency division multiplexing
(OFDM)
Modulation type
• BPSK, QPSK, 16-QAM, 64-QAM
Transmit power
• Configurable by system administrator
MAC
• CSMA/CA with ACK
Operating channels
• US, Canada – 11
• ETSI – up to 13
• Japan – 13
Data rates
• 6, 9, 12, 18, 24, 36, 48, 54 Mbps per channel
Multi-mode radio band
• 802.11a or 802.11b/g selectable via software
14 Alcatel-Lucent | OmniAccess AP
OAW-AP65
RADIO SPECS 5GHZ - IEEE 802.11A
Frequency Bands Supported
• 5.150 ~ 5.250GHz (low band),
country specific
• 5.250 ~ 5.350GHz (mid band),
country specific
• 5.470 ~ 5.725GHz (Europe), country
specific
• 5.725 ~ 5.825GHz GHz (high band),
country specific
Radio technology
• Orthogonal frequency division multiplexing
(OFDM)
Modulation type
• BPSK, QPSK, 16-QAM, 64-QAM
Transmit power
• Configurable by system administrator /
professional installer
MAC
• CSMA/CA with ACK
Operating channels
• US, Canada – 12
• ETSI – up to 19
• Japan – 4
Data rates
• 6, 9, 12, 18, 24, 36, 48, 54 Mbps per channel
Multi-mode radio band
• 802.11a or 802.11b/g selectable via software
RADIO SPECS 2.4GHZ - IEEE 802.11B
Frequency Bands Supported
• 2.400 ~ 2.4835GHz (Global), channels
country specific
MAC
• CSMA/CA with ACK
Operating channels
• US, Canada – 11
• ETSI – 13
• Japan – 13
Data rates
• 1, 2, 5.5, 11 Mbps per channel
• Multi-mode radio band 802.11a or
802.11b/g selectable via software
RADIO SPECS 2.4GHZ - IEEE 802.11G
Frequency Bands Supported
• 2.400 ~ 2.4835GHz (Global), channels
country specific
Radio technology
• Orthogonal frequency division multiplexing
(OFDM)
Modulation type
• BPSK, QPSK, 16-QAM, 64-QAM
Transmit power
• Configurable by system administrator
MAC
• CSMA/CA with ACK
Operating channels
• US, Canada – 11
• ETSI – 13
• Japan – 13
OAW-AP80
RADIO SPECS - 5GHZ - IEEE 802.11A
Frequency Bands Supported
• 5.150 ~ 5.250 GHz (low band),
country specific
• 5.250 ~ 5.350 GHz (mid band),
country specific
• 5.470 ~ 5.725 GHz (Europe),
country specific
• 5.725 ~ 5.825/5.850 GHz (high band),
country specific
Radio technology
• Orthogonal frequency division multiplexing
(OFDM)
Modulation type
• BPSK, QPSK, 16-QAM, 64-QAM
Transmit power
• Configurable by system administrator /
professional installer
MAC
• CSMA/CA with ACK
Operating channels
• US, Canada – 13
• ETSI – up to 19
• Japan – Disabled
Data rates
• 6, 9, 12, 18, 24, 36, 48, 54 Mbps per
channel
Data rates
• 6, 9, 12, 18, 24, 36, 48, 54 Mbps per channel
Radio band
• Selectable via software
Multi-mode radio band
• 802.11a or 802.11b/g selectable via software
Multi-mode radio band
• 802.11a or 802.11b/g selectable via software
Radio technology
• Direct sequence spread spectrum (DSSS)
Modulation type
• CCK, BPSK, QPSK
Transmit power
• Configurable by system administrator
Alcatel-Lucent | OmniAccess AP 15
RADIO SPECS – 2.4GHZ - IEEE 802.11B
Frequency Bands Supported
• 2.400 ~ 2.4835/2.497 GHz, channels
country specific
Radio technology
• Direct sequence spread spectrum (DSSS)
Transmit power
• Configurable by system administrator
MAC
• CSMA/CA with ACK
Modulation type
• CCK, BPSK, QPSK
Operating channels
• US, Canada – 11
• ETSI – up to 13
• Japan – 13
Transmit power
• Configurable by system administrator
Data rates
• 6, 9, 12, 18, 24, 36, 48, 54 Mbps per channel
MAC
• CSMA/CA with ACK
Radio band
• Selectable via software
Operating channels
• US, Canada – 11
• ETSI – up to 13
• Japan – 14
Multi-mode radio band
• 802.11a or 802.11b/g selectable via software
Data rates
• 1, 2, 5.5, 11 Mbps per channel
Radio band
• Selectable via software
Multi-mode radio band
• 802.11a or 802.11b/g selectable via software
RADIO SPECS – 2.4GHZ – IEEE 802.11G
Frequency Bands Supported
• 2.400 ~ 2.4835 GHz, channels
country specific
Radio technology
• Orthogonal frequency division multiplexing
(OFDM)
• Modulation type – BPSK, QPSK, 16-QAM,
64-QAM
16 Alcatel-Lucent | OmniAccess AP
Dimensions
OAW-AP41
• Height: 4.21 in. (107 mm)
• Width: 7.24 in. (184 mm)
• Depth: 1.26 in. (32 mm)
• Weight: 15.88 oz. (450 g)
OAW-AP60
• Height: 6.26 in. (159 mm)
• Width: 3.90 in. (99 mm)
• Depth: 1.22 in. (31 mm)
• Weight: 12.2 oz. (198 g)
OAW-AP61
• Height: 8.50 in. (216 mm)
• Width: 3.90 in. (99 mm)
• Depth: 1.22 in. (31 mm)
• Weight: 13.6 oz. (255 g)
OAW-AP65
• Height: 3.94 in. (100 mm)
• Width: 3.94 in. (100 mm)
• Depth: 1.47 in. (37 mm)
• Need weight
OAW-AP70
• Height (antenna retracted): 6.57 in. (167 mm)
• Height (antenna extended): 11.54 in.
(293 mm)
• Width: 7.48 in. (190 mm)
• Depth: 1.18 in. (30 mm)
• Weight: 18 oz. (510 g)
OAW-AP80
• Height: 7.80 in. (198 mm)
• Width: 7.80 in. (198 mm)
• Depth: 2.76 in. (70 mm)
• Weight: 56.84 oz. (1600 g)
Electrical Interfaces
OAW-AP41
• 1 x 10/100 Base-TX (RJ-45) auto-sensing
Ethernet interface
• Auto-sensing MDI/MDX
• PoE 48VDC / 200mA power over Ethernet
(802.3af compliant)
• 1 x Reset Button (restores to factory default
configuration)
OAW-AP60 AND AP61
• 1 x 10/100BaseTX auto-sensing Ethernet RJ45 interface
• Auto-sensing MDI/MDX
• Serial and power over Ethernet - 48V DC /
200mA power over Ethernet (802.3af
compliant)
• 1 x 5V DC power interface
OAW-AP65
• 1 x 10/100 Base-TX (RJ-45) auto-sensing
Ethernet interface
• Auto-sensing MDI/MDX
• PoE 48VDC / 220mA power over Ethernet
(802.3af compliant)
• Supports Serial over Ethernet
• Rear Mounted
• 1 x 5V DC External Power Interface
OAW-AP70
• 2 x 10/100BaseTX RJ-45 auto-sensing
Ethernet interfaces (Port 0)
• Auto-sensing MDI/MDX
• PoE 48V DC / 250mA power over Ethernet
(802.3af compliant)
• Serial over Ethernet (Port 1)
• Auto-sensing MDX
• PoE 48V DC / 250mA power over Ethernet
(802.3af compliant)
• Redundant Ethernet data link and power
over Ethernet
• USB ver2.0 interface
• 1 x 5V DC power interface
OAW-AP80
• 1 x 10/100 Base-TX auto-sensing Ethernet
interface (IP67 8-pin male (pole) M12 circular
DIN connector (Au) contacts)
• Auto-sensing MDI/MDX
• PoE 48V DC / 1.2A (30W) power over
Ethernet (non-standard 802.3af)
• Integral lightning arrester
• 1 x 2.4 Ghz N-Type Female Antenna Interface
• 1 x 5 Ghz N-Type Female Antenna Interface
• 1 x Electrical Ground / Safety Terminal
• 1 x Integral ENET lightening arrester
Mechanical Interfaces
OAW-AP41 MECHANICAL INTERFACES
• Wall-mount lugs
OAW-AP60 AND AP61 AND OAW-AP70
• Standard Kensington MicroSaver security
cable interface (not supplied)
• Optional wall and ceiling mount kit interface
OAW-AP65
• 1 x Integrated ceiling tile rail snap-in mount
(for 15/16” diameter rails). Located on rear
of device
• 1 x Kensington locking interface
OAW-AP80
• 4 x Mounting Bracket Points
• Ruggedized wall, pole or mast mount
hardware provided (articulating in horizontal
and vertical planes)
Visual Indicators (LEDs)
OAW-AP41
• (Ready) Power on/off/booting
• (ENET) Link status / activity
• (WLAN A) IEEE 802.11a status
• (WLAN G) IEEE 802.11b/g status
OAW-AP60 AND AP61 AND OAW-AP70
• (Ready) Power on/off
• (Ethernet) link status / activity
• (Radio mode) 802.11a and b/g AP /air
monitor mode
OAW-AP65
• (Ready) Power on/off/booting
• (Ethernet 0) link status / activity
• 802.11a + b/g Wireless Access Point
• 802.11a + b/g Wireless Air Monitor
OAW-AP80
• (Ready) Power on/off (provided on Power injector)
Power Requirements
OAW-AP41
• 48V DC / 200mA power-over-Ethernet
(802.3af compliant)
OAW-AP60
• External AC power or POE
• 5V DC / 2A supplied externally via optional
country specific AC adapter kits
• 48V DC / 200mA power over Ethernet
(802.3af compliant)
OAW-AP65
• External AC power or POE
• 5V DC / 2A supplied externally via optional
country specific AC adapter kits
• 48V DC / 220mA Power-over-Ethernet
(802.3af compliant)
OAW-AP70
• External AC power or POE
• 5V DC / 3A supplied externally via optional
country specific AC adapter kits
• 48V DC / 250mA power over Ethernet
(802.3af compliant)
OAW-AP80
• Access Point power draw - 48V DC / 1.2A
(30W) Power-over-Ethernet (non-standard
802.3af)
• External Power Injector, auto-sensing 100240V AC Input, 1.5A Output 48 VDC, 1.2A
(30W) (provided)
Alcatel-Lucent | OmniAccess AP 17
Environmental Requirements
OAW-AP41, AP60, AP61, AP65 AND
OAW-AP70
Temperature
• Operating: 0 to 50º C (32 to 122º F)
• Storage: 0 to 70º C (32 to 158º F)
Humidity
• 5% to 95% (non-condensing)
OAW-AP80
Temperature
• Operating: -30 to 55 ºC (-22 to 131 ºF)
• Storage: -40 to 80 ºC (-40 to 176 ºF)
Humidity
• 0% - 95% (non-condensing)
Survival Wind Speed
• 201 Km/hr / 125 mph
Standards
OAW-AP41 AND AP65
• Ethernet IEEE 802.3 / IEEE 802.3u
• Wireless IEEE 802.11a/b/g
• IEEE 802.3af
OAW-AP60 AND AP61 AND OAW-AP70
• Ethernet IEEE 802.3 / IEEE 802.3u
• Power over Ethernet IEEE 802.3af
• Wireless IEEE 802.11a/b/g
• USB 2.0 (OAW-AP70 only)
18 Alcatel-Lucent | OmniAccess AP
OAW-AP80
• Ethernet IEEE 802.3 / IEEE 802.3u
• Wireless IEEE 802.11a/b/g
• PPP over Ethernet RFC2516
Safety
OAW-AP41
• cULus listed
• IEC 60950 CB certificate and report
• UL Listed (UL60950)
• UL Listed (Canadian Electrical Code/CSA 22.2
No. 60950)
• EN60950 / IEC60950
• EN 60601-1-1 & EN 60601-1-2: (MD
compliance)
OAW-AP60 AND AP61 AND AP70
• CSA/NTRL (CSA 22.2 No. 950 and UL1950)
• EN60950 (TÜV/GS), IEC60950 (CB)
OAW-AP65
• UL Listed (UL60950)
• UL Listed (Canadian Electrical Code/CSA 22.2
No. 60950)
• EN60950 / IEC60950
• UL Listed (UL2043)
• EN 60601-1-2: 2001 (MD compliance
OAW-AP70
• UL Listed (UL60950)
• UL Listed (Canadian Electrical Code/CSA 22.2
No. 60950)
• EN60950 / IEC60950
• National Electrical Code Section 300-22(C)
• Canadian Electrical Code, Part 1, CSA C22.1
Sections 2-128, 12-010(3), and 12-100
• UL2043 plenum rating
OAW-AP80
• cULus listed
• PSE Mark (AC Power Supply)
• IEC 60950 CB certificate and report
• UL Listed (UL60950)
• UL Listed (Canadian Electrical Code/CSA 22.2
No. 60950)
• EN60950 / IEC60950
Electromagnetic Compliance
OAW-AP60 AND AP61 AND AP70
• FCC Part 15 Class B – OAW-AP70 only
• FCC Part 15 Class A – OAW-AP60 and AP61
• FCC Part 15 Class C 15.207/15.247
• FCC Part 15 Class E 15.407
• ICES- 003 Class A
• RSS 210 (CAN)
• VCCI Class A
• EN 61000-3, EN 61000-4-2, EN 61000-4-3, EN
61000-4-4
• EN 61000-4-5, EN 61000-4-6, EN 61000-4-8,
EN 61000-4-11
• 73/23/EEC and 89/336/EEC
• EN 55022, EN55024 (89/336/EEC)
• ETS 300 328 (89/336/EEC), ETS 301 489
(89/336/EEC)
• AS/NZS 3548 Class A
• RFS 29 (NZ) (OAW-AP70 only)
Ordering information
OAW-AP41
OmniAccess AP41 access point with single Integral Tri-Band Antenna. Supports 802.11a or 802.11b/g (SW selectable).
Supports one 10/100 Base-T (RJ-45) Ethernet Interface (Power over Ethernet capable) and Installation Guide.
OAW-AP60
OmniAccess AP60 access point with dual RP-SMA external antenna connectors (supports diversity). Supports 802.11a or
802.11b/g (SW selectable). Supports one 10/100BaseT (RJ-45) Ethernet Interface (Power and Serial over Ethernet capable) and
Installation Guide. Antenna shall be ordered separately. When no Power over Ethernet is available, an external Power Adapter Kit
shall be ordered separately.
OAW-AP61
OmniAccess AP61 access point with Integral Tri-Band Antenna (supports diversity). Supports 802.11a or 802.11b/g (SW selectable).
Supports one 10/100BaseT (RJ-45) Ethernet Interface (power and serial over Ethernet capable) and Installation Guide.
When nopower over Ethernet is available, an external Power Adapter Kit shall be ordered separately.
OAW-AP65
OmniAccess AP65 access point with Integral Antenna (2.4Ghz & 5Ghz Bands with Diversity). Supports 802.11a and 802.11b/g.
Supports one 10/100 Base-T (RJ-45) Ethernet Interface (803.3af compliant and SoE capable). Includes an Installation Guide.
When no Power over Ethernet is available, an external Power Adapter Kit shall be ordered separately.
OAW-AP70
OmniAccess AP70 access point with Integral Antenna and Quad RP-SMA external antenna connectors (2.4 GHz and 5 Ghz bands
with Diversity). Supports 802.11a and 802.11b/g. Supports two 10/100BaseT (RJ-45) Ethernet Interface (one with power and
serial over Ethernet and one with power over Ethernet capability) and one USB2.0 interface. Includes an Installation Guide.
If required, an external antenna shall be ordered separately. When no power over Ethernet is available, an external Power Adapter
Kit shall be ordered separately.
OAW-AP80
Alcatel-Lucent OAW-AP80M Outdoor Wireless Access Point. Includes one OAW-AP80M Outdoor Wireless Access Point
(Simultaneous 802.11 'A'+'B/G’) with Dual N-Type Detachable Antenna Interfaces (1 x 2.4Ghz Band and 1 x 5Ghz Band),
1 x 10/100 Base-T (8Pin DIN) Ethernet Interface (supports High Power over Ethernet, Integral Power Lightening Arrester and
Ground Point), 1 x RSSI DC Alignment interface, Pole / Mast Mounting Hardware and Installation Guide. Also Includes: Indoor Use
Only Auto-sensing 110/240VAC to 48VDC Power over Ethernet Injector suitable for use with the OAW-AP80M Wireless Access
Points and 100 foot Outdoor Ethernet cable (8Pin DIN to 10/100Base-T RJ-45). External antennas and antenna lightning arrestor
shall be purchased separately.
AP-60-MNT
OmniAccess AP60 and AP61 wall / ceiling mounting kit. Includes mounting cradle hardware, ceiling tile clips and security screws
to mount the access point securely on wall or ceiling.
AP-65-MNT
OmniAccess AP65 wall, secure wall and desktop mounting kit.
AP-70-MNT
OmniAccess AP70 wall / ceiling mounting kit. Includes mounting cradle hardware, ceiling tile clips and security screws
to mount the access point securely on wall or ceiling.
OAW-AP-AC
OmniAccess access point Power Adapter Kit. Should be ordered when Access Point cannot be powered with Power over Ethernet.
Contains: Auto- sensing 110V/240V AC Power Brick complete with AC Power Cable (North America).
OAW-AP-LAR-1
Outdoor Antenna Lightning Arrestor. Lightning Surge Arrestor for the OAW-AP80 Access Point: Single, In-line lightening arrester
with N-type Male to Ntype Female interface. Supports RF frequency pass through of 2Ghz – 6Ghz.
External Antenna
Alcatel-Lucent offers a wide variety of outdoor rated detachable antenna types certified for use with the OmniAccess AP80M.
Please contact your local sales representative for details.
Alcatel-Lucent | OmniAccess AP 19
Alcatel-Lucent OmniAccess Wireless LAN Access Point Family
OAW-AP41, OAW-AP60, OAW-AP61, OAW-AP65, OAW-AP70, OAW-AP80
Alcatel, Lucent, Alcatel-Lucent and Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other
trademarks are the property of their respective owners. The information presented is subject to
change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein.
© 2007 Alcatel-Lucent. All rights reserved. P/N 031669-00 Rev C 6/07
www.alcatel-lucent.com