http://www.xiaoyu163.com
QQ 376315150 892498299
TIMER
0 OPEN/CLOSE
STANDBY/ON
ORDER NO.
RRV2792
XV-DV99
DVD/CD TUNER
TEL
TEL
XV-DV990
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model
Type
ZYXJ, ZVXJ
DC power supplied from other system component
Remarks
2
ZYXJ, ZVXJ
DC power supplied from other system component
2
connect it to the prescribed system component(s), otherwise damage may result.
Please connect it to the POWERED SUBWOOFER S-DV99SW/S-DV990SW, for adjustment and
operation inspection.
Component
DVD/CD TUNER
SPEAKER SYSTEM
System
Service Manual
XV-DV99
RRV2792
This manual
S-DV99
POWERED SUBWOOFER
S-DV99SW
SPEAKER SYSTEM
S-DV99ST
Component
DVD/CD TUNER
System
RRV2807
Service Manual
XV-DV990
RRV2792
POWERED SUBWOOFER
S-DV990SW
RRV2806
SPEAKER SYSTEM
S-DV990ST
RRV2811
www
Remarks
Remarks
This manual
x iao y u163. co m
For details, refer to "Important symbols for good services" .
.
PIONEER CORPORATION
4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2003
T-ZZV JULY 2003 printed in Japan
http://www.xiaoyu163.com
376315150 892498299
376315150 892498299
is a system(s) component. QQ 3763 1515 0 89 2498 299
TEThis
L product
13942296513
This product does not function properly when independent ; to avoid malfunctions, be sure to
XV-DV990
QQ
QQ
XV-DV99
Regional restriction
codes (Region No.)
Power Requirement
13942296513
13942296513
XV-DV99
1
2
3
http://www.xiaoyu163.com
4
SAFETY INFORMATION
A
QQ 376315150 892498299
This service manual is intended for qualified service technicians; it is not meant for the casual
do-it-yourselfer. Qualified technicians have the necessary test equipment and tools, and have been
trained to properly and safely repair complex products such as those covered by this manual.
Improperly performed repairs can adversely affect the safety and reliability of the product and may
void the warranty. If you are not qualified to perform the repair of this product properly and safely, you
should not risk trying to do so and refer the repair to a qualified service technician.
WARNING !
B
TEL
TEL
THE AEL (ACCESSIBLE EMISSION LEVEL) OF THE LASER POWER OUTPUT IS LESS THAN CLASS 1
BUT THE LASER COMPONENT IS CAPABLE OF EMITTING RADIATION EXCEEDING THE LIMIT FOR
CLASS 1.
A SPECIALLY INSTRUCTED PERSON SHOULD DO SERVICING OPERATION OF THE APPARATUS.
13942296513
13942296513
LASER DIODE CHARACTERISTICS
FOR DVD : MAXIMUM OUTPUT POWER : 5 mW
WAVELENGTH : 650 nm
FOR CD : MAXIMUM OUTPUT POWER : 7 mW
WAVELENGTH : 780 nm
C
376315150 892498299
VRW1872
D
Additional Laser Caution
1. Laser Interlock Mechanism
• Loading switch (S101 on the LOAB Assy) is used for interlock
mechanism of the laser.
When this switch turned ON in SW2 (XCLOSE) side (OPEN signal is
0V and XCLOSE signal is 3.5V), a laser becomes the status which
can completely oscillation.
Furthermore, the laser completely oscillates in the disc judgment and
disc playback.
When player is power ON state and laser diode is not completely
oscillating, 780nm laser diode is always oscillating by half power.
• Laser diode is driving with Q201 (650nm LD) and Q211 (780nm LD)
on the DVDM Assy.
Therefore, when short-circuit between the emitter and collector of
these transistors or the base voltage is supplied for transistors turn
on, the laser oscillates. (failure mode)
• In the test mode ∗ , there is the mode that the laser oscillates except
for the disc judgment and playback. LD ON mode in the test mode
oscillates with the laser forcibly.
The interlock mechanism mentioned above becomes invalid in this
mode.
E
x iao y u163. co m
Name Label
www
F
.
2. When the cover is open, close viewing through the objective lens with
the naked eye will cause exposure to the laser beam.
∗ : See page 74.
XV-DV99
2
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
QQ
QQ
LABEL CHECK
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
[ Important symbols for good services ]
In this manual, the symbols shown-below indicate that adjustments, settings or cleaning should be made securely.
When you find the procedures bearing any of the symbols, be sure to fulfill them:
A
1. Product safety
You should conform to the regulations governing the product (safety, radio and noise, and other regulations), and
should keep the safety during servicing by following the safety instructions described in this manual.
2. Adjustments
To keep the original performances of the product, optimum adjustments or specification confirmation is indispensable.
In accordance with the procedures or instructions described in this manual, adjustments should be performed.
3. Cleaning
B
For optical pickups, tape-deck heads, lenses and mirrors used in projection monitors, and other parts requiring cleaning,
proper cleaning should be performed to restore their performances.
TEL
TEL
4. Shipping mode and shipping screws
13942296513
13942296513
To protect the product from damages or failures that may be caused during transit, the shipping mode should be set or
the shipping screws should be installed before shipping out in accordance with this manual, if necessary.
5. Lubricants, glues, and replacement parts
Appropriately applying grease or glue can maintain the product performances. But improper lubrication or applying
glue may lead to failures or troubles in the product. By following the instructions in this manual, be sure to apply the
prescribed grease or glue to proper portions by the appropriate amount.For replacement parts or tools, the prescribed
ones should be used.
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
IC851
IC861, IC871
QQ
QQ
* When the FFC cable between the VIDEO ASSY-CN8301 and DVDM ASSY-CN 943 is off from
the connector and then the power is turned on, the parts below on the DVDM ASSY may be
destroyed.
Be sure to take care when diagnosing the ASSYS. Refer to P.106.
C
DSD1791DBR (AUDIO DAC)
DSD1702EG (AUDIO DAC)
D
E
www
.
x iao y u163. co m
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
3
8
1
2
3
http://www.xiaoyu163.com
4
CONTENTS
A
QQ 376315150 892498299
B
TEL
E
www
F
.
x iao y u163. co m
XV-DV99
4
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
D
QQ
QQ
QQ 3763 1515 0 89 2498 299
TEL 13942296513
13942296513
13942296513
C
TEL
SAFETY INFORMATION ..................................................................................................................................... 2
1. SPECIFICATIONS ............................................................................................................................................ 5
2. EXPLODED VIEWS AND PARTS LIST ............................................................................................................ 8
2.1 PACKING ................................................................................................................................................... 8
2.2 EXTERIOR SECTION.............................................................................................................................. 10
2.3 LOADING MECHA ASSY ........................................................................................................................ 12
2.4 TRAVERSE MECHA ASSY-S .................................................................................................................. 14
2.5 DISPLAY UNIT......................................................................................................................................... 15
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM .......................................................................................... 16
3.1 BLOCK DIAGRAM ................................................................................................................................... 16
3.2 LOAB ASSY and OVERALL WIRING DIAGRAM..................................................................................... 18
3.3 DVDM ASSY(1/4)..................................................................................................................................... 20
3.4 DVDM ASSY(2/4)..................................................................................................................................... 22
3.5 DVDM ASSY(3/4)..................................................................................................................................... 24
3.6 DVDM ASSY(4/4)..................................................................................................................................... 26
3.7 VIDEO and DSP TRADE ASSYS............................................................................................................. 28
3.8 DSP ASSY(1/2)........................................................................................................................................ 30
3.9 DSP ASSY(2/2)........................................................................................................................................ 32
3.10 FM/AM TUNER MODULE ...................................................................................................................... 34
3.11 TATRADE and CONTROL(1/3) ASSYS ................................................................................................. 36
3.12 CONTROL(2/3) and HP ASSYS ............................................................................................................ 38
3.13 CONTROL ASSY(3/3)............................................................................................................................ 40
3.14 LCDCONT, CONNECT, KEY RTOP, KEY R, KEY L and KEY LTOP ASSYS ........................................ 42
3.15 WAVEFORMS ........................................................................................................................................ 44
4. PCB CONNECTION DIAGRAM ..................................................................................................................... 45
4.1 LOAB ASSY ............................................................................................................................................. 45
4.2 DVDM ASSY ............................................................................................................................................ 46
4.3 VIDEO and DSP TRADE ASSYS............................................................................................................. 48
4.4 DSP ASSY ............................................................................................................................................... 52
4.5 FM/AM TUNER MODULE ........................................................................................................................ 54
4.6 KEY RTOP, KEY R, KEY L and KEY LTOP ASSYS................................................................................. 55
4.7 TXTRADE, CONTROL and HP ASSYS ................................................................................................... 56
4.8 LCDCONT and CONNECT ASSYS ......................................................................................................... 60
5. PCB PARTS LIST ........................................................................................................................................... 62
6. ADJUSTMENT ............................................................................................................................................... 68
6.1 TUNER SECTION .................................................................................................................................... 68
6.2 ADJUSTMENT ITEMS AND LOCATION ................................................................................................. 69
6.3 JIGS AND MEASURING INSTRUMENTS............................................................................................... 69
6.4 NECESSARY ADJUSTMENT POINTS ................................................................................................... 70
6.5 TEST MODE ............................................................................................................................................ 71
6.6 MECHANISM ADJUSTMENT .................................................................................................................. 72
7. GENERAL INFORMATION ............................................................................................................................. 74
7.1 DIAGNOSIS ............................................................................................................................................. 74
7.1.1 TEST MODE ......................................................................................................................................... 74
7.1.2 DISPLAY SPECIFICATIONS OF THE TEST MODE............................................................................. 76
7.1.3 FUNCTIONAL SPECIFICATION OF THE SHORTCUT KEY................................................................ 77
7.1.4 SPECIFICATION OF MODEL INFORMATION ..................................................................................... 78
7.1.5 FUNCTIONAL SPECIFICATION OF THE SERVICE MODE................................................................. 79
7.1.6 MECHANICAL ERROR HISTORY ........................................................................................................ 80
7.1.7 ID NUMBER AND DATA SETTING ....................................................................................................... 85
7.1.8 TROUBLE SHOOTING ......................................................................................................................... 88
7.1.9 DSP TROUBLE SHOOTING ................................................................................................................. 91
7.1.10 SEQUENCE AFTER POWER ON ...................................................................................................... 95
7.1.11 SINGLE OPERATION METHOD....................................................................................................... 100
7.1.12 PROTECTION CIRCUIT ................................................................................................................... 101
7.1.13 DISASSEMBLY ................................................................................................................................. 105
7.2 IC ........................................................................................................................................................... 114
7.3 DISC/CONTENT FORMAT .................................................................................................................... 137
7.4 CLEANING............................................................................................................................................. 139
8. PANEL FACILITIES ...................................................................................................................................... 140
6
http://www.xiaoyu163.com
5
7
8
1. SPECIFICATIONS
QQ 376315150 892498299
Accessories
Continuous Power (RMS). . . . . 75 W / channel
. . . . . . . . . . . . . . . . . . . . (1 kHz, THD 10%, 6Ω)
Operating Instructions . . . . . . . . . . . . . . . . . . 1
Setup guide. . . . . . . . . . . . . . . . . . . . . . . . . . 1
Display unit . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Remote control unit . . . . . . . . . . . . . . . . . . . . 1
Power cord . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Video Cord (yellow plugs) . . . . . . . . . . . . . . . 1
Display cable (gray plugs). . . . . . . . . . . . . . . 1
Control cable A (blue plugs) . . . . . . . . . . . . . 1
Control cable B (black plugs) . . . . . . . . . . . . .1
FM antenna . . . . . . . . . . . . . . . . . . . . . . . . . .1.
AM loop antenna . . . . . . . . . . . . . . . . . . . . . . 1
Dry cell batteries (AA/R6) . . . . . . . . . . . . . . . 2
Speaker cords (5 m). . . . . . . . . . . . . . . . . . . . 3
Speaker cords (10 m). . . . . . . . . . . . . . . . . . . 2
Non-skid pads (center speaker) . . . . . . . . . . . 3
Non-skid pads (subwoofer) . . . . . . . . . . . . . . 4
Speaker stands. . . . . . . . . . . . . . . . . . . . . . . 4
Warranty Card. . . . . . . . . . . . . . . . . . . . . . . . 1
Disc section
TEL
Digital audio
characteristics . . . . . . . DVD fs: 96 kHz, 24-bit
Type. . . . . . DVD system, Video CD system and
Compact Disc digital audio system
Frequency response
48 kHz sampling. . . . . . . . . . 4 Hz – 22 kHz
96 kHz sampling. . . . . . . . . . 4 Hz – 44 kHz
192 kHz sampling. . . . . . . . . 4 Hz – 88 kHz
S/N ratio . . . . . . . . . . . . . . . . . . . . . . . . 108dB
Dynamic range . . . . . . . . . . . . . . . . . . . 95 dB
Total harmonic distortion . . . . . . . . . . .0.005 %
Wow and Flutter. . . . . . . Limit of measurement
(±0.001 % W.PEAK) or less (JEITA)
FM tuner section
B
13942296513
13942296513
Satellite Speaker System
(S-DV99ST)
Frequency Range. . . . . . . . . . . . .87.5 - 108MHz
Antenna . . . . . . . . . . . . . . . .75Ω , unbalanced
Frequency Range. . . . . . . 531 kHz to 1,602 kHz
Antenna . . . . . . . . . . . . . . . . . . . Loop antenna
Miscellaneous
QQ 3763 1515 0 89 2498 299
TEL 13942296513
376315150 892498299
376315150 892498299
Power Requirements
European model. . AC 220 - 230 V, 50/60 Hz
U.K. model. . . . . . . . . . . AC 230V, 50/60 Hz
Power Consumption . . . . . . . . . . . . . . . .163 W
Power Consumption
in standby mode . . . . . . . . . . . . . . . . . . 0.48
.
W
Satellite Speaker System
(S-DV990ST)
Dimensions:
DVD/CD Tuner. .360 (W) x 74 (H) x 270 (D) mm
Display Unit . . . . 274 (W) x 44 (H) x 35 (D) mm
Type . . . . . . . . . . . . . Flat panel type bookshelf
Speaker
Exciter. . . . . . . . . . . . . . . 2.5 cm exciter x 3
Tweeter. . . . . . . . . . . . . . 2.6
. cm (cone type)
Nominal impedence . . . . . . . . . . . . . . . . . . 6Ω
Frequency range. . . . . . . . . . . .100 – 35,000 Hz
Max. input . . . . . . . . . . . . . . . . . . 75 W (JEITA)
Front / Surround speakers
Dimensions . . . . .120 (W) x 30 (D) x 450 (H) cm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.9 kg
Center speaker
Dimensions . . . . .420 (W) x 32 (D) x 120 (H) cm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.9 kg
Weight:
DVD/CD Tuner. . . . . . . . . . . . . . . . . . . . 3.2 kg
Display Unit . . . . . . . . . . . . . . . . . . . . . . 0.2 kg
C
QQ
QQ
Type Sealed, antimagnetic
Speaker . . . . . . . . . . . . . . . . 8.7
. cm (cone type)
. . . . . . . . . . . . . . . . . . . . . . .5.2
. cm (cone type)
Nominal impedence . . . . . . . . . . . . . . . . . . 6Ω
Frequency range. . . . . . . . . . . .80 – 20,000 Hz
Max. input . . . . . . . . . . . . . . . . . . 75 W (JEITA)
Front / Surround speakers
Dimensions . . . . .110 (W) x 59 (D) x 284 (H) cm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.7 kg
Center speaker
Dimensions . . . . .284 (W) x 58 (D) x 110 (H) cm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . 0.7 kg
AM tuner section
A
TEL
Amplifier Section
Powered subwoofer
(S-DV99SW S-DV990SW)
D
E
Type . . . . . .Bass reflex floor type, antimagnetic
Speaker . . . . . . . . . . . . . . . . 18 cm (cone type)
Nominal impedence . . . . . . . . . . . . . . . . . . 6Ω
Frequency range. . . . . . . . . . . . . . .28 – 250 Hz
Max. input . . . . . . . . . . . . . . . . . . 75 W (JEITA)
Dimensions . . . .192 (W) x 436 (D) x 395 (H) cm
Weight . . . . . . . . . . . . . . . . . . . . . . . . . .12.5 kg
www
.
x iao y u163. co m
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
5
8
1
A
3
http://www.xiaoyu163.com
2
4
QQ 376315150 892498299
• Specifications and design subject to
possible modification without notice, due
to improvements.
This product includes FontAvenue®
fonts licenced by NEC corporation.
FontAvenue is a registered trademark
of NEC Corporation.
B
TEL
TEL
13942296513
13942296513
C
376315150 892498299
DB
Y/
ON
V1
AN
ST
/V
2/
DV
D isplay unit (AXX7163)
AM loop antenna
(ATB7009)
FM antenna
(ADH7030)
V3
VI
DE
TV
/A
CD
Dry cell batteries
(size AA/R6P) x 2
O
OR OS
DO CL
EN
E
0
OP
M
FM
D
AY OS
TR CL
EN
OP
E
8
¡
3
0
4
RE
7
1
4
DV
D
ME
NU
TU
NE
TU
RN
ST
+
R
TE
EN
–
ST
TU
M
UT
E
+
D
SO
UN
–
NE
R
TE E
AS M
L
M LU
RO
VO
NT
CO
L
VO
TV
IN
PU
T
OM ED
ND NC
RA VA
AD
P
D
OM E
ZO BTITL
SU
AT
PE ND
RE RROU
SU
M
RA
OG TO
PR AU
SE
RO
TU
P
E
GL
AN DIO
AU
DV
OM
TE
ST
TO
SE
D
TC
1
LE
VE
CH
SY
T UP
ST
EM
3
SY
2
NE
P ME
ME
DIM
NU
6
P
S
DIS
9
P
D
DIS
R
7
LA
ME
SY
5
DV
4
S
NU
L
NG
UA
FO
8 ––
–
/ ER
– LD
FO CLR
GE
SU
TE
LD
LE
ER
+
ER
FF
ENT /O
ON ER
XT TIM
TE
B
0
(CL
PC
IN
OC
K
AD
J)
M
MA
AX
00
00
Control cable A
(ADE7063) L=3m
Control cable B
(ADE7078) L=3m
Display cable
(ADE7077) L=1.5m
V ideo cord
(VDE1065)
Yellow plugs
Blue plugs
E
Black plugs
• Power cord
(ZVXJ : ADG1156)
• Power cord
(ZYXJ : ADG1154)
www
F
Gray plugs
.
x iao y u163. co m
XV-DV99
6
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
Remote control unit
(AXD7368)
QQ
QQ
accessories
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
A
B
TEL
TEL
13942296513
13942296513
QQ
QQ
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
C
D
E
www
.
x iao y u163. co m
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
7
8
1
3
http://www.xiaoyu163.com
2
4
2. EXPLODED VIEWS AND PARTS LIST
QQ 376315150 892498299
NOTES:
A
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The
mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
Screws adjacent to mark on product are used for disassembly.
For the applying amount of lubricants or glue, follow the instructions in this manual.
(In the case of no amount instructions, apply as you think it appropriate.)
2.1 PACKING
B
TEL
TEL
17
5,6
13942296513
13942296513
12,14,16
18
Display Unit
25
FOLDER+
ENTER
9
TIMER/
CLOCK
PDP ROOM SETUP
6
0
SUB
CH LEVEL
FOLDER–
3
8
QUIET/
MIDNIGHT
HOME
MENU
5
MAIN
CLR
RANDOM
ANGLE
2
TEST TONE
7
– /– –
DIMMER
TOP MENU
REPEAT
SUBTITLE
SYSTEM
SETUP
VOL
9
INPUT
1
ZOOM
PROGRAM
AUDIO
SOUND
TV CONTROL
P
ST+
RETURN
TUNE–
¢
ENTER
TUNE+
¡
MUTE
0
7
LINE
ST–
OPEN/CLOSE
L1/L2
3
8
TV
DVD MENU
1
TUNER
FM/AM
STANDBY/ON
DISPLAY
DVD
CD
19
Top
D
21
Front
24
20
23
22
E
www
F
.
x iao y u163. co m
XV-DV99
8
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
21
4
19
MASTER
VOLUME
QQ 3763 1515 0 89 2498 299
11,13,15
QQ
QQ
TEL 13942296513
8
BASS MODE DIALOGUE VIRTUAL SB
AUTO
SURROUND ADVANCED
1,2,3,4,7,10
4
C
6
http://www.xiaoyu163.com
5
7
8
PACKING parts List
QQ 376315150 892498299
Mark No.
>
1
2
3
4
5
Description
Power Cord
FM Antenna
AM Loop Antenna
Video Cord
Control Cable A (Blue Pugs)
Mark No.
Part No.
14
See Contrast table (2)
ADH7030
ATB7009
VDE1065
ADE7063
15
16
6
7
8
9
NSP 10
11
13
Operating Instructions
(English, French)
Setup Guide
(English, French)
Operating Instructions
(German, Italian)
ARE7333
NSP 17
NSP 18
NSP 19
20
21
22
23
24
25
See Contarst table (2)
See Contrast table (2)
See Contrast table (2)
Setup Guide
(Swedish, Dutch)
Warranty Card
Polyethylene Bag
Polyethylene Bag
Front Pad
See Contrast table (2)
ARY7065
AHG7098
Z21-038
AHA7420
Rear Pad
Spacer
Packing Case
Packing Sheet
Protection Bag
AHA7421
AHB7087
See Contrast table (2)
AHG7015
AHG7109
(2) CONTRAST TABLE
XV-DV99/ZYXJ, ZVXJ, XV-DV990/ZYXJ and ZVXJ are constructed the same except for the following :
Mark No.
>
Symbol and Description
XV-DV99/ZYXJ
XV-DV99/ZVXJ XV-DV990/ZYXJ XV-DV990/ZVXJ
ADG1154
ARE7332
ADG1156
ARE7332
ADG1154
ARE7334
ADG1156
ARE7334
ARC7491
Not used
ARC7491
Not used
16 Setup Guide
(Swedish, Dutch)
23 Packing Case
ARC7490
Not used
ARC7506
Not used
ARC7493
Not used
ARC7493
Not used
ARC7492
Not used
ARC7508
Not used
AHD8185
AHD8185
AHD8220
AHD8220
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
B
C
QQ
QQ
1 Power Cord
12 Setup Guide
(English, French)
13 Operating Instructions
(German, Italian)
14 Setup Guide
(German, Italian)
15 Operating Instructions
(Swedish, Dutch)
A
13942296513
13942296513
ADE7078
ADE7077
AXD7368
XZN3130
VEM1031
Part No.
See Contrast table (2)
TEL
TEL
12
Control Cable B (Black Plugs)
Display Cable (Gray Plugs)
Remote Control Unit
Battery Cover
Dry Cell Batteries (R6P,AA)
Description
Setup Guide
(German, Italian)
Operating Instructions
(Swedish, Dutch)
D
E
www
.
x iao y u163. co m
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
9
8
1
3
http://www.xiaoyu163.com
2
4
2.2 EXTERIOR SECTION
A
QQ 376315150 892498299
40
NON-CONTACT
SIDE
31
41
CONTACT SIDE
41
28
24
3
32
35
41
J
B
E
D
4
41
41
28
25
41
K L
2
42
32
13942296513
13942296513
C
26
36
TEL
TEL
B
41
30
36
C
27
42
F
42
5
44
41
42
H
38
19
41
41
20
41
B
6
22
H
E
42
D
C
48
7
42
A
J
16
49
49
K
17
G
41
17
41
42
I
1
46
A
46
45
B
D
49
H
E
42
11
8
29
42
10
M
19
I
E
16
N
12
42
23
G
F
O
41
C
34
42
L
www
33
F
x iao y u163. co m
18
9
29
37
.
42
42
29
29
XV-DV99
10
1
2
3
http://www.xiaoyu163.com
4
39
376315150 892498299
376315150 892498299
D
G
41
43
QQ 3763 1515 0 89 2498 299
I
F
42
QQ
QQ
TEL 13942296513
47
43
L
14 Refer to
"2.3 LOADING
MECHA ASSY".
6
http://www.xiaoyu163.com
5
7
8
EXTERIOR SECTION parts List
QQ 376315150 892498299
Mark No.
Description
Mark No.
Part No.
DVDM Assy
VIDEO Assy
DSP Assy
DSP TRADE Assy
FM/AM TUNER Module
AWM7813
AWU8100
AWX8325
AWU8101
AXQ7229
6
7
8
9
10
TX TRADE Assy
CONTROL Assy
HP Assy
KEY R TOP Assy
KEY R Assy
AWU8114
See Contrast table (2)
AWU8102
AWU8113
AWU8112
31
32
33
34
35
KEY L Assy
KEY L TOP Assy
••••••••
LOADING MECHA Assy
••••••••
AWU8110
AWU8111
11
12
13
NSP 14
15
TEL 13942296513
AEB7321
AAK8135
AAN7223
AMA7028
AMB7850
36
37
NSP 38
NSP 39
40
Button Assy T
Button Assy F
ID Label Assy
Name Label R
Label
AXG7205
AXG7206
VXW1003
See Contrast table (2)
VRW1872
41
42
43
NSP 44
45
Screw
Screw
Screw
DVD Assy
Connector Assy
BBZ30P080FMC
BPZ30P080FZK
PSC30P080FNI
AXA7126
PG05KK-E25
Cushion
Adapter02 L
Adapter02 R
Screw
AEB7267
ANW7267
ANW7268
BPZ30P080FMC
46
47
48
49
See Contrast table (2)
ANF7035
ANF7036
ANG7467
QQ 3763 1515 0 89 2498 299
(2) CONTRAST TABLE
XV-DV99/ZYXJ, ZVXJ, XV-DV990/ZYXJ and ZVXJ are constructed the same except for the following :
Mark No.
NSP
Symbol and Description
XV-DV99/ZYXJ
7 CONTROL Assy
22 Rear Panel
39 Name Label R
XV-DV99/ZVXJ XV-DV990/ZYXJ XV-DV990/ZVXJ
AWU8099
ANC8185
AAL7333
AWU8099
ANC8185
AAL7333
AWU8148
ANC8213
AAL7336
B
376315150 892498299
376315150 892498299
••••••••
Rear Panel
Bottom Plate
Top Plate
Angle DSP
ADD7436
ADD7437
ADD7438
ADD7439
ADD7440
Top Spacer
Side Plate
Tray Panel
Bottom Base ZY
Top Panel
A
C
QQ
QQ
21
22
NSP 23
NSP 24
25
30P FFC/30V
30P FFC/30V
5P FFC/30V
13P FFC/30V
19P FFC/30V
Part No.
ANG7468
ANG7475
ANG7470
AEB7090
AEB7320
13942296513
13942296513
16
17
18
19
20
VWT1208
Description
Angle PCB S
Angle PCB M
Screw Plate
Leg
Tuner Spacer
TEL
TEL
1
2
3
4
5
26
27
28
29
30
AWU8148
ANC8213
AAL7336
D
E
www
.
x iao y u163. co m
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
11
8
1
3
http://www.xiaoyu163.com
2
4
2.3 LOADING MECHA ASSY
QQ 376315150 892498299
Note :
A
8
2 Refer to
"2.4 TRAVERSE MECHA. ASSY-S".
6
Refer to
" Application of Lubricant".
8
8
To DVDM CN101 (Pickup Assy-S)
To DVDM CN104 (Stepping Motor)
Daifree
GEM1036
To DVDM CN105 (Spindle Motor)
8
B
20
18
3
TEL
TEL
12
Lubricating Oil
GYA1001
A
22
17
5
4
16
19
22
C
22
7
A
10
14
11
Lubricating Oil
GYA1001
D
A
9
1
22
LOADING MECHA ASSY parts List
Mark No.
NSP 1
2
3
4
5
E
6
7
8
9
10
Description
LOAB Assy
Traverse Mechanism Assy-S
Loading Motor Assy
Motor Pulley
Motor
Flexible Cable (24P)
Connector Assy 2P
Floating Rubber
Belt
Stabilizer
www
F
11
12
13
14
15
Loading Base
Float Base DVD
Drive Cam
Gear Pulley
Loading Gear
16
Drive Gear
.
Mark No.
Part No.
VWG2346
VXX2871
VXX2872
PNW1634
VXM1105
VDA1947
VKP2253
VEB1351
VEB1330
VNE2253
Description
Part No.
17
18
19
20
SW Lever
Clamper Plate
Bridge
Clamper
VNL1925
VNE2251
VNE2252
VNL1924
21
22
23
Screw
Screw
Tray
JGZ17P028FMC
Z39-019
VNL1920
x iao y u163. co m
VNL1917
VNL1918
VNL1919
VNL1921
VNL1922
VNL1923
XV-DV99
12
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
15
QQ
QQ
21
13942296513
13942296513
13
23
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
Application of Lubricant
A
Lubricating Oil
GYA1001
Around the shaft
No. 11
Loading Base
B
TEL
TEL
Lubricating Oil
GYA1001
376315150 892498299
376315150 892498299
Rear View
Daifree
GEM1036
Concave of unevenness
Daifree
GEM1036
Concave of unevenness
No. 23
Tray
C
QQ
QQ
No. 13
Drive Cam
Lubricating Oil
GYA1001
Front View
No. 23
Tray
Lubricating Oil
GYA1001
Inner side of a ditch
QQ 3763 1515 0 89 2498 299
TEL 13942296513
Lubricating Oil
GYA1001
Lubricating Oil
GYA1001
Inner side of a ditch
No. 13
Drive Cam
13942296513
13942296513
Lubricating Oil
GYA1001
D
E
Inner side of a ditch
Daifree
GEM1036
www
x iao y u163. co m
Bottom View
Top View
.
Concave of unevenness
Daifree
GEM1036
Side of the rib
Daifree
GEM1036
XV-DV99
5
6
http://www.xiaoyu163.com
7
F
13
8
1
3
http://www.xiaoyu163.com
2
4
2.4 TRAVERSE MECHA ASSY-S
QQ 376315150 892498299
15 (Torque : 0.15 ± 0.01 N•m)
A
Silicone Adhesive
GEM1037
17
8
3
17
10
17
10
6
To
DVDM CN101
(Pickup Assy)
13
9
16
C
376315150 892498299
To DVDM CN105
(Spindle Motor)
15 (Torque : 0.15 ± 0.01 N•m)
16
D
2
To
DVDM CN104
(Stepping Motor)
11
E
TRAVERSE MECHA ASSY-S parts List
Mark No.
>
F
Description
1
2
3
4
5
Spindle Motor
Stepping Motor
Pickup Assy-S
Skew Screw
Skew Spring
6
7
8
9
Guide Bar
Sub Guide Bar
Leaf Spring
Joint Spring
www
Mark No.
Part No.
10
VXM1099
VXM1101
OXX8005
VBA1080
VBH1335
.
NSP 11
12
13
14
15
Description
Part No.
Support Spring
VNC1020
Mechanism Chassis
Damper Sheet
Spacer
Joint 03
Tapping Screw
VNE2248
VEB1335
VNL1913
VNL1949
OBA8021
Screw
Screw
BBZ20P050FZK
PMA26P100FMC
x iao y u163. co m
VLL1514
VLL1515
VNC1023
VNC1019
16
17
XV-DV99
14
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
Screw Tight
GYL1001
5
(Adjustment
spring)
QQ
QQ
Silicone Adhesive
GEM1037
13942296513
13942296513
14
4 (Adjustment screw)
TEL
TEL
12
CONTACT SIDE
1
B
NON-CONTACT
SIDE
7
6
http://www.xiaoyu163.com
5
7
8
2.5 DISPLAY UNIT
QQ 376315150 892498299
16
18
1
J
17
16
A
16
7
8
9
15
12
B
K
TEL
TEL
14
2
11
10
5
4
13942296513
13942296513
3
6
7
QQ 3763 1515 0 89 2498 299
13
376315150 892498299
376315150 892498299
TEL 13942296513
QQ
QQ
7
DISPLAY UNIT parts List
Mark No.
Description
Part No.
1
2
3
4
5
LCD CONT Assy
CONNECT Assy
LCD
LED (White)
Diffusion Sheet
AWU8119
AWU8118
AAV7098
NSPW510BS-1064
AAK8144
6
7
8
9
10
Earth Spring
Leg
Back Light Case
REF Plate A
REF Plate B
ABH7233
AEB7090
AMR7463
AMR7464
AMR7465
11
12
13
14
15
Optical Plate
Display Window
Display AL
Display Panel
Display Cover
AMR7466
AAK8137
AAP7094
AMB7851
AMC7051
16
17
18
Screw
Screw
Display Unit
www
.
D
E
x iao y u163. co m
BPZ30P080FZK
PSC30P080FNI
AXX7163
F
XV-DV99
5
C
6
http://www.xiaoyu163.com
7
15
8
1
2
3
http://www.xiaoyu163.com
4
3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM
QQ 376315150 892498299
B
CN101
CN1013
DVD MODULE
20MHz
27MHz
G/Y
IC301
03SD PU
STM6316ATXXA
C
Y
FTS&SPDL DRlVER
CN104
system control
13942296513
CN103
DOUT
RW Playback
(VRmode with CPRM)
3.3V, 1.8V
208pin, PQFP
IC802
64M SDRAM
IC802
C
64M SDRAM
IC851
CN5502
FL/FR
DSD
DAC
IC603
16M
FLASH ROM
IC871
IC801
IIC
DSD
DAC
Center
IC861
DSD
DAC
SL/SR
376315150 892498299
CN8907
(1/2)
CN8906(2/3)
JA8251
CN8003
DIGITAL
OPT IN1
CN8011
IC8501
DSPD56367
DSP
AK4114
IC8201
DIR
FM/AM
TUNER
MODULE
CN201
F
CN8906(1/3)
DolbyDigital Decoder
Dolby PrologicII
DTS Decoder
CN5605
ATTENUATOR
IC8001
INPUT
SELECTOR
- 6dB
TV IN
www
F
IC8401
AK4529
8ch
CODEC
- 10dB
CN8401(1/2)
LINE 2
IN
BUFFER
IC8003
DSP ASSY
CN8302(1/2)
LINE 1
IN
E
F
x iao y u163. co m
C 2/2 VIDEO ASSY(2/2)
.
XV-DV99
16
1
2
3
http://www.xiaoyu163.com
4
CN8007(2/2)
D
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
CN943(2/2)
QQ
QQ
EMI
SAA7893
HL/C2
SACD LSI
CN8908
SW
13942296513
MPEG Video Decoder
Video Encoder
(withPictureControl)
Video DAC
(Progressive: 54MHz)
Audeo Decoder
-DD MPEG
JPEG Viewer
WMA Playback
L
CN5604
M63018FP
IC101
CN901
CN105
M
-
M
-
V
6IN-6OUT
CN8301(2/2)
+
STI5588CVB
B/PB
TEL
TEL
LoadMotor
MM1623
VlDEO AMP
DRlVER
BACK END IC
*single disc mecha
+
IC601
FRONT END IC
PlCK UP
ASSY
Steppingtor
R/PR
IC501
SPINDLE
Motor
B
DVDM ASSY
CN8301(1/2)
Traverse Mechanism Assy
VWT1199
CN8007(1/2)
A
CN943(1/2)
3.1 BLOCK DIAGRAM
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
JA8871
C 1/2 VIDEO ASSY(1/2)
L
M
N
O
R/PR
KEY
G/Y
SCART CONNECTOR
B/PB
V
KEY RTOP ASSY
KEY R ASSY
KEY L ASSY
KEY LTOP ASSY
COMPOSITE
VIDEO OUT
C
B
CN1902
S-VIDEO OUT
Y
DISPLAY UNIT
TEL
TEL
J
CN5601
LCDCONT ASSY
13942296513
13942296513
IR
SENSOR
LCD
IC5501
PDC110B
CN5001
micro
Processoer
CN5102
POWERED SUBWOOFER
SPEAKER
RELAY
ANDREW
IC8402
LPF
FL/FR
OUT
IC3301
STK402- 270
+
LPF
IC3001
M62446AFP
E-VOL
LPF
6ch E-vol
SW
OUT
3ch Power
Amp
CENTRE
OUT
IC3401
STK402- 270
SW
CN8906(3/3)
CN5101
CN5201
CN3701
IC8401
SW MIX/GAIN
CN8501
CONTROL ASSY
CN8401(2/2)
FL/FR
CN8302(2/2)
H
K
CONNECT ASSY
376315150 892498299
LPF
REC OUT
SELECT
CN8907(2/2)
IC3901
E
JA3901
CN3902
IC8651
CN3901
SL/SR
IC3101
IC3102
IC3103
IC3104
REC
OUT
IC3902
E-VOL
LC75344
I
.
HP ASSY
x iao y u163. co m
HEADPHONE
OUT
LINE
OUT
F
XV-DV99
5
6
D
SL/SR
OUT
3ch Power
Amp
Center
376315150 892498299
IC8381
IC8382
C
QQ
QQ
QQ 3763 1515 0 89 2498 299
TEL 13942296513
www
A
http://www.xiaoyu163.com
7
17
8
1
3
http://www.xiaoyu163.com
2
4
3.2 LOAB ASSY and OVERALL WIRING DIAGRAM
A
QQ 376315150 892498299
D D 1/2 - D 2/2
DSP ASSY (AWX8325)
CN8011
O
CN8003
KEY LTOP
ASSY
(AWU8111)
CN8007
N
KEY L ASSY
(AWU8110)
E DSP TRADE ASSY (AWU8101)
B
TEL
TEL
13942296513
13942296513
C
VIDEO ASSY (AWU8100)
D
E
A
www
x iao y u163. co m
LOAB ASSY
(VWG2346)
.
LOADING MOTOR
ASSY : VXX2505
STEPPING
MOTOR
: VXM1102
PICKUP ASSY-S (OXX8005)
SPINDLE MOTOR
: VXM1098
XV-DV99
18
1
2
3
http://www.xiaoyu163.com
4
DVDM ASSY
(AWM7813)
F
A
B B 1/4 - B 4/4
CN943
376315150 892498299
376315150 892498299
C
QQ
QQ
QQ 3763 1515 0 89 2498 299
TEL 13942296513
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
K
J
LCDCONT ASSY
(AWU8119)
Note : When ordering service parts, be sure to refer to
"EXPLODED VIEWS and PARTS LIST" or "PCB PARTS LIST".
I
CONNECT
ASSY
(AWU8118)
HP ASSY
(AWU8102)
L
M
G
KEY RTOP
ASSY
(AWU8113)
F
KEY R ASSY
(AWU8112)
TXTRADE ASSY
(AWU8114)
A
FM/AM TUNER
MODULE
(AXQ7229)
CN5102
CN201
CN5001
B
TEL
TEL
13942296513
13942296513
QQ
QQ
CN901
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
B
H H 1/3 - H 3/3
C
D
E
CONTROL ASSY
(XV-DV99 : AWU8099)
(XV-DV990 : AWU8148)
www
.
x iao y u163. co m
F
A
XV-DV99
5
6
http://www.xiaoyu163.com
7
19
8
1
3
http://www.xiaoyu163.com
2
4
3.3 DVDM ASSY(1/4)
A
QQ 376315150 892498299
B 1/4 DVDM ASSY (AWM7813)
A
B
CN601
TEL
TEL
(S)
(S)
(S)
13942296513
13942296513
STEPPING
MOTOR
(S)
(S)
(S)
C
(F)
(S)
(S)
(F)
(T)
3
D
(F)
(F)
(T)
(T)
E
PICKUP
ASSY-S
CN1013
(RF)
(RF)
www
F
B 1/4
(RF)
x iao y u163. co m
(RF)
(RF)
.
(RF)
XV-DV99
20
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
QQ
QQ
(T)
SPINDLE
MOTOR
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
(RF)
(DVD)
(F)
(T)
(DVD)
(S)
A
: RF SIGNAL ROUTE
: DVD DATA SIGNAL ROUTE
: FOCUS SERVO LOOP LINE
: TRACKING SERVO LOOP LINE
: STEPPING SERVO LOOP LINE
(DVD)
(DVD)
B 2/4
B
TEL
TEL
4
(DVD)
13942296513
13942296513
QQ
376315150 892498299
(RF)
(RF)
(RF)
(RF)
(RF)
(RF)
2
D
1
www
.
(RF)
(RF)
(RF)
(RF)
E
(RF)
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
(RF)
QQ
5
C
x iao y u163. co m
B 4/4
: The power supply is shown with the marked box.
F
B 1/4
XV-DV99
5
6
http://www.xiaoyu163.com
7
21
8
1
2
3
http://www.xiaoyu163.com
4
3.4 DVDM ASSY(2/4)
A
QQ 376315150 892498299
B 4/4
B
TEL
TEL
B 4/4
13942296513
13942296513
C
E
(DVD)
(AD)
(AD)
(AD)
B 2/4
(C/V)
(C)
(Y)
(CY/G)
(Cr/R)
.
(Cb/B)
x iao y u163. co m
(DVD)
www
F
(DVD)
XV-DV99
22
1
2
(AD)
3
http://www.xiaoyu163.com
4
(DVD)
376315150 892498299
376315150 892498299
D
QQ
QQ
QQ 3763 1515 0 89 2498 299
TEL 13942296513
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
B 2/4 DVDM ASSY (AWM7813)
(DVD)
(Cr/R)
(CY/G)
(Cb/B)
(Y)
(C)
(C/V)
(AD)
A
: DVD DATA SIGNAL ROUTE
: VIDEO SIGNAL ROUTE (Cr/R)
: VIDEO SIGNAL ROUTE (CY/G)
: VIDEO SIGNAL ROUTE (Cb/B)
: S VIDEO SIGNAL ROUTE (Y)
: S VIDEO SIGNAL ROUTE (Y)
: S VIDEO SIGNAL ROUTE (C/V)
B
: AUDIO DATA SIGNAL ROUTE
TEL
TEL
(AD)
13942296513
13942296513
(AD)
B 3/4, 4/4
(AD)
B 3/4
(C)
QQ
(AD)
(C/V)
376315150 892498299
(C)
B 3/4
(C/V)
(Y)
(CY/G)
(Y)
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
6 8
(C)
(C)
(AD)
QQ
B 4/4
(C/V)
(Cb/B)
(Y)
C
D
7
(C/V)
(Y)
(CY/G)
E
(CY/G)
(Cb/B)
(Cb/B)
(AD)
(Cr/R)
(Cr/R)
(Cr/R)
(AD)
9
10
(AD)
(AD)
www
.
(DVD)
x iao y u163. co m
(DVD)
(DVD)
11
B 4/4
F
B 1/4
B 2/4
XV-DV99
5
6
http://www.xiaoyu163.com
7
23
8
1
2
3
http://www.xiaoyu163.com
4
3.5 DVDM ASSY(3/4)
A
QQ 376315150 892498299
B
TEL
TEL
C
(AD)
(AD)
E
www
F
B 3/4
.
x iao y u163. co m
XV-DV99
24
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
D
QQ
QQ
QQ 3763 1515 0 89 2498 299
TEL 13942296513
13942296513
13942296513
(AD)
B 2/4
B 2/4
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
(AD)
B
B 3/4 DVDM ASSY (AWM7813)
13942296513
13942296513
(AD)
B
TEL
TEL
(AD)
B 4/4
B 2/4
C
QQ
QQ
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
A
(AD)
H 1/3 CN5604
(AD)
: AUDIO DATA SIGNAL ROUTE
D
E
www
.
x iao y u163. co m
: The power supply is shown with the marked box.
F
B 3/4
XV-DV99
5
6
http://www.xiaoyu163.com
7
25
8
1
2
3
http://www.xiaoyu163.com
4
3.6 DVDM ASSY(4/4)
A
QQ 376315150 892498299
B 3/4
B 2/4
B
TEL
TEL
13942296513
13942296513
C
(FL)
(C)
(SW)
(SL)
(AD)
(AD)
E
www
B 2/4, 3/4
F
(AD)
B 2/4
B 2/4
B 1/4
B 4/4
(AD)
x iao y u163. co m
(AD)
.
(AD)
XV-DV99
26
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
D
QQ
QQ
QQ 3763 1515 0 89 2498 299
TEL 13942296513
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
(FL)
(FL)
B 4/4 DVDM ASSY (AWM7813)
A
(FL)
(FL)
(FL)
B
(FL)
TEL
TEL
(C)
(FL)
(FL)
(SW)
(FL)
(SL)
C
CN8301
13942296513
13942296513
B 2/4
(CY/G)
(SL)
(Cb/B)
(Cr/R)
(C)
TEL 13942296513
(C)
(SW)
(C/V)
376315150 892498299
(C)
(Y)
(C)
(SW)
(Cr/R)
(SL)
(SL)
(CY/G)
(Cb/B)
(Y)
(C)
(C/V)
(SL)
376315150 892498299
QQ 3763 1515 0 89 2498 299
(SW)
(SW)
QQ
QQ
(C)
www
(AD)
(FL)
(SL)
(C)
(SW)
: VIDEO SIGNAL ROUTE (CY/G)
E
: VIDEO SIGNAL ROUTE (Cb/B)
: S VIDEO SIGNAL ROUTE (Y)
: S VIDEO SIGNAL ROUTE (Y)
: S VIDEO SIGNAL ROUTE (C/V)
: AUDIO DATA SIGNAL ROUTE
: AUDIO SIGNAL ROUTE (Front L ch)
: AUDIO SIGNAL ROUTE (Surround L ch)
: AUDIO SIGNAL ROUTE (Center ch)
: AUDIO SIGNAL ROUTE (Sub Woofer ch)
6
http://www.xiaoyu163.com
7
F
B 4/4
XV-DV99
5
D
: VIDEO SIGNAL ROUTE (Cr/R)
x iao y u163. co m
(SL)
.
C
27
8
1
2
3
http://www.xiaoyu163.com
4
3.7 VIDEO and DSP TRADE ASSYS
A
QQ 376315150 892498299
(Y)
(FL)
(C/V)
(C)
(Cr/R)
(CY/G)
(FL)
B 4/4 CN943
B
(FL)
(Cb/B)
(SL)
(SW)
(FL)
(SW)
(SL)
(C)
(SL)
TEL
TEL
(SW)
(C)
(C)
13942296513
13942296513
(FL)
(SL)
(SL)
C
D 1/2 CN8003
376315150 892498299
QQ 3763 1515 0 89 2498 299
(AD)
(D)
(D)
(AD)
(D)
D
(FL)
D 1/2 CN8007
(FL)
(C)
(C)
(FL)
(FL)
(SL)
(SL)
(SW)
(SW)
(C)
(C)
E
(SW)
F
www
C E
E
x iao y u163. co m
(AD)
D 2/2 CN8011
(SW)
.
H 1/3 CN5502
DSP TRADE ASSY (AWU8101)
XV-DV99
28
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
TEL 13942296513
QQ
QQ
(D)
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
H 3/3 CN8401
C VIDEO ASSY (AWU8100)
A
(FL)
(C/V)
(C/V)
(C/V)
(C/V)
(Y)
(Y)
(Y)
(C)
(C)
(C)
B
(C)
TEL
TEL
(C/V)
(FL)
(FL)
(SL)
(C)
(SW)
(FL)
: The power supply is shown with the marked box.
13942296513
(Cr/R)
(Cb/B)
(SL)
(CY/G)
(Cb/B)
376315150 892498299
(C)
(Y)
(FL)
(FL)
(Y) (C/V)
(C)
(CY/G)
(FL)
(FL)
AV CONNECTOR
376315150 892498299
(Cr/R) (C)
(C/V)
(Cb/B)
(D)
(Cb/B)
(CY/G)
(SW)
(Cr/R) (C)
C
QQ
QQ
QQ 3763 1515 0 89 2498 299
TEL 13942296513
D
E
(Cr/R) (C)
(Y) (C/V)
(D)
13942296513
(Y)
(CY/G)
(D)
(D)
www
(Y) (C/V)
x iao y u163. co m
(Cr/R)
(CY/G)
.
CAUTION :
FOR CONTINUED PROTECTION AGAINST
RISK OF FIRE. REPLACE ONLY WITH
SAME TYPE NO. 49101.5F MFD, BY
LITTELFUSE INK. FOR IC5601 (AEK7065).
(Cb/B)
(Y)
(C)
(C/V)
(FL)
: VIDEO SIGNAL ROUTE (Cr/R)
(SL)
: VIDEO SIGNAL ROUTE (CY/G)
(C)
: VIDEO SIGNAL ROUTE (Cb/B)
: S VIDEO SIGNAL ROUTE (Y)
(SW)
(D)
: S VIDEO SIGNAL ROUTE (Y)
(AD)
: S VIDEO SIGNAL ROUTE (C/V)
: AUDIO SIGNAL ROUTE (Front L ch)
: AUDIO SIGNAL ROUTE (Surround L ch)
: AUDIO SIGNAL ROUTE (Center ch)
F
: AUDIO SIGNAL ROUTE (Sub Woofer ch)
: AUDIO SIGNAL ROUTE (DIGITAL ch)
C
: AUDIO DATA SIGNAL ROUTE
XV-DV99
5
6
http://www.xiaoyu163.com
7
29
8
1
3
http://www.xiaoyu163.com
2
4
3.8 DSP ASSY(1/2)
A
QQ 376315150 892498299
D 1/2 DSP ASSY (AWX8325)
(AD)
(FL)
(SL)
(C)
(SW)
(D)
: AUDIO DATA SIGNAL ROUTE
: AUDIO SIGNAL ROUTE (Front L ch)
: AUDIO SIGNAL ROUTE (Surround L ch)
: AUDIO SIGNAL ROUTE (Center ch)
: AUDIO SIGNAL ROUTE (Sub Woofer ch)
: AUDIO SIGNAL ROUTE (DIGITAL ch)
B
TEL
TEL
13942296513
13942296513
(D)
C
(AD)
(D)
(D)
(AD)
D
(AD)
(D)
(D)
(AD)
(D)
(D)
(D)
E
D 2/2
(D)
(AD)
(AD)
D 2/2
D 2/2
www
F
D 1/2
(AD)
.
x iao y u163. co m
XV-DV99
30
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
(AD)
(AD)
QQ
QQ
QQ 3763 1515 0 89 2498 299
TEL 13942296513
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
A
B
(FL)
TEL
TEL
(FL)
(FL)
CN8902
(SW)
E
13942296513
(SL)
(FL)
(AD)
(SL)
(SW)
(C)
(AD)
13942296513
(FL)
(AD)
(AD)
(AD)
(C)
QQ
QQ
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
C
(AD)
(D)
D
(D)
(D)
(D)
(AD)
E
(AD)
(AD)
www
.
x iao y u163. co m
E
CN8901
: The power supply is shown with the marked box.
F
D 1/2
XV-DV99
5
6
http://www.xiaoyu163.com
7
31
8
1
2
3
http://www.xiaoyu163.com
4
3.9 DSP ASSY(2/2)
A
QQ 376315150 892498299
D 2/2 DSP ASSY (AWX8325)
B
TEL
TEL
D 1/2
(AD)
13942296513
13942296513
(AD)
(AD)
(AD)
(AD)
(AD)
C
D 1/2
D 1/2
E
www
F
D 2/2
.
x iao y u163. co m
E
CN8903
XV-DV99
32
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
D
QQ
QQ
QQ 3763 1515 0 89 2498 299
TEL 13942296513
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
(AD)
A
: AUDIO DATA SIGNAL ROUTE
B
TEL
TEL
13942296513
13942296513
QQ
QQ
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
C
D
E
www
.
x iao y u163. co m
D 2/2
XV-DV99
5
F
: The power supply is shown with the marked box.
6
http://www.xiaoyu163.com
7
33
8
1
3
http://www.xiaoyu163.com
2
4
3.10 FM/AM TUNER MODULE
A
QQ 376315150 892498299
F
FM/AM TUNER MODULE (AXQ7229)
B
FM FRONT END
(FM)
TEL
TEL
13942296513
(FM)
13942296513
(FM)
(FM)
(FM)
(FM)
C
(FM)
(AM)
(FM)
(AM)
(AM)
MW RF TUNING BLOCK
(AM)
(FM)
D
(AM)
OSC : 981 - 2052kHz 9k step
E
F
F
www
.
x iao y u163. co m
XV-DV99
34
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
(FM)
(AM)
QQ
QQ
QQ 3763 1515 0 89 2498 299
TEL 13942296513
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
A
: The power supply is shown with the marked box.
(TX)
(AM)
(FM)
: AUDIO SIGNAL ROUTE (Tuner L ch)
: AM SIGNAL ROUTE
: FM SIGNAL ROUTE
B
CN201
(AM)
(AM)
(AM)
(TX)
(FM)
G
(AM)
(FM)
(AM)
(AM)
(TX)
QQ 3763 1515 0 89 2498 299
(TX)
(FM)
(TX)
376315150 892498299
376315150 892498299
(FM)
(AM)
C
QQ
QQ
(TX)
TEL 13942296513
13942296513
13942296513
CN5702
(AM)
TEL
TEL
(AM)
L201
ATE7003
D
E
www
.
x iao y u163. co m
F
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
35
8
1
2
3
http://www.xiaoyu163.com
4
3.11 TATRADE and CONTROL(1/3) ASSYS
A
QQ 376315150 892498299
H 3/3
B
13942296513
13942296513
R5511
XV-DV99 : 47k
XV-DV900 : 12k
C
CN8908
C
H 3/3
(AD)
H 2/3
E
www
K
CN5101
F
H 1/3
.
x iao y u163. co m
XV-DV99
36
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
QQ
QQ
D
TEL
TEL
XV-DV900
ONLY
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
: The power supply is shown with the marked box.
A
CN201
G TXTRADE ASSY (AWU8114)
F
(TX)
(TX)
B
TEL
TEL
(TX)
13942296513
13942296513
ASSY
H 1/3 CONTROL
(XV-DV99 : AWU8099)
(XV-DV990 : AWU8148)
QQ
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
(TX)
(AD)
B 3/4 CN901
QQ
H 2/3
C
H 2/3
H 2/3
D
E
www
L
.
x iao y u163. co m
CN1902
To Sub Woofer
F
B
H 2/3, 3/3
H 3/3
(AD)
(TX)
: AUDIO DATA SIGNAL ROUTE
: AUDIO SIGNAL ROUTE (Tuner L ch)
G H 1/3
XV-DV99
5
6
http://www.xiaoyu163.com
7
37
8
1
3
http://www.xiaoyu163.com
2
4
3.12 CONTROL(2/3) and HP ASSYS
A
QQ 376315150 892498299
(TV)
(TV)
(TX)
(L1)
(TX)
(TV)
(L1)
(FL)
(FL)
(L1)
(FL)
B
(FL)
(FL)
(FL)
C
(FL)
(FL)
(FL)
(FL)
H 1/3
H 1/3
E
(FL)
(FL)
(FL)
www
F
H 2/3 I
.
(FL)
x iao y u163. co m
XV-DV99
38
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
D
QQ
QQ
QQ 3763 1515 0 89 2498 299
TEL 13942296513
13942296513
13942296513
(TX)
TEL
TEL
(TX)
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
(FL)
(TV)
(L1)
(TX)
ASSY
H 2/3 CONTROL
(XV-DV99 : AWU8099)
: AUDIO SIGNAL ROUTE (Front L ch)
: AUDIO SIGNAL ROUTE (TV L ch)
A
(XV-DV990 : AWU8148)
: AUDIO SIGNAL ROUTE (LINE 1 L ch)
: AUDIO SIGNAL ROUTE (Tuner L ch)
H 1/3
(FL)
(FL)
(FL)
(FL)
H 3/3
B
TEL
TEL
13942296513
13942296513
(TX)
H 1/3
(TX)
(TX)
(FL)
(FL)
(FL)
(FL)
QQ
QQ
(FL)
(FL)
(FL)
(FL)
(FL)
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 24H93/38 299
TEL 13942296513
C
(FL)
H 1/3, 3/3
(FL)
(FL)
H 3/3
D
E
(FL)
(FL)
www
.
x iaoIy u163. co m
F
HP ASSY (AWU8102)
: The power supply is shown with the marked box.
H 2/3 I
XV-DV99
5
6
http://www.xiaoyu163.com
7
39
8
1
2
3
http://www.xiaoyu163.com
4
3.13 CONTROL ASSY(3/3)
A
QQ 376315150 892498299
H 1/3
(FL)
(FL)
(FL)
H 2/3
H 2/3
(FL)
(FL)
(FL)
CN8302
C
(FL)
(SL)
(C)
(C)
(SW)
(SW)
(SL)
(FL)
(C)
(FL)
C
(SW)
(FL)
376315150 892498299
D
(FL)
(C)
(FL)
(FL)
(SW)
E
H 2/3
H 3/3
.
x iao y u163. co m
H 1/3
www
F
XV-DV99
40
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
QQ
QQ
(FL)
13942296513
13942296513
(SL)
TEL
TEL
(FL)
B
H 2/3
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
ASSY
H 3/3 CONTROL
(XV-DV99 : AWU8099)
(XV-DV990 : AWU8148)
(FL)
(FL)
(FL)
A
(FL)
(FL)
(FL)
B
(FL)
TEL
TEL
13942296513
(SL)
(SL)
QQ
(SL)
(FL)
To Sub Woofer
(SL)
376315150 892498299
(C)
(C)
A
(C)
(SW)
(C)
(SW)
D
(SW)
E
(SW)
376315150 892498299
QQ 3763 1515 0 89 2498 299
(FL)
QQ
(SW)
TEL 13942296513
C
(FL)
13942296513
(SL)
www
x iao y u163. co m
(SW)
.
(FL)
(SL)
H 1/3
H 2/3
(C)
: The power supply is shown with the marked box.
(SW)
: AUDIO SIGNAL ROUTE (Front L ch)
F
: AUDIO SIGNAL ROUTE (Surround L ch)
: AUDIO SIGNAL ROUTE (Center ch)
: AUDIO SIGNAL ROUTE (Sub Woofer ch)
H 3/3
XV-DV99
5
6
http://www.xiaoyu163.com
7
41
8
1
2
3
http://www.xiaoyu163.com
4
3.14 LCDCONT, CONNECT, KEY RTOP, KEY R, KEY L and KEY LTOP ASSYS
A
QQ 376315150 892498299
K CONNECT ASSY (AWU8118)
KEY R ASSY
S1901 : 0 (OPEN/CLOSE)
H 1/3
KEY RTOP ASSY
S1902 : 7 (STOP)
S1903 : 6 (PLAY/PAUSE)
CN5201
KEY L ASSY
S1904 : STANDBY/ON
KEY LTOP ASSY
S1905 : +
VOL
S1906 : –
B
TEL
TEL
13942296513
13942296513
C
L
KEY RTOP ASSY (AWU8113)
D
E
F
www
x ao y u163. co m
R ASSY
M KEY
(AWU8112)
N KEY L ASSY (AWU8110)
.
i
K L M N O
XV-DV99
42
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
O KEY LTOP ASSY (AWU8111)
QQ
QQ
QQ 3763 1515 0 89 2498 299
TEL 13942296513
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
J
A
LCDCONT ASSY (AWU8119)
B
TEL
TEL
13942296513
13942296513
QQ
QQ
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
C
H 1/3
CN5601
D
E
www
.
x iao y u163. co m
F
J K L
XV-DV99
5
6
http://www.xiaoyu163.com
7
43
8
1
2
3
http://www.xiaoyu163.com
4
3.15 WAVEFORMS
QQ 376315150 892498299
Note : The encircled numbers denote measuring point in the schematic diagram.
A
B
DVDM ASSY
Measurement condition ; No. 1, 2 and 12 to 17 : MJK1, Title 1-chp 1
No. 8 : CD, ABEX-784 Track 1
1
IC301 - pin 4 [RFOUT]
V: 200mV/div. H: 0.1µsec/div.
2
B
No. 13, 14 and 17 : DVD-REF-A1, T2-Chap.1
No. 3 to 5 : DVD-REF-A1, T2-Chap.19
IC301 - pin 36 [FG]
V: 1V/div. H: 5msec/div.
3
IC101 - pin 14 [A1], 13 [A2], 12 [A3]
V: 2V/div. H: 2msec/div.
GND
4
[Tray is opening]
[Tray is closing]
[PLAY]
V: 2V/div. H: 500nsec/div.
[STOP]
V: 2V/div. H: 500nsec/div.
6
STOP
PLAY
IC501 - pin 23 [Composite Video out]
V: 1V/div. H: 10µsec/div.
7
IC501 - pin 21 [S Video out-Y]
V: 1V/div. H: 10µsec/div.
8
IC501 - pin 26 [S Video out-C]
V: 1V/div. H: 10µsec/div.
7
D
8
9
IC501 - pin 20 [Component Video out-Y]
V: 1V/div. H: 10µsec/div.
- pin 18 [Component Video out-Pb]
10 IC501
V: 2V/div. H: 10µsec/div.
- pin 16 [Component Video out-Pr]
11 IC501
V: 2V/div. H: 10µsec/div.
9
E
10
11
www
F
.
x iao y u163. co m
XV-DV99
44
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
PLAY
Accelerator
ON
QQ
QQ
QQ 3763 1515 0 89 2498 299
TEL 13942296513
Brakes
ON
13942296513
13942296513
IC301 - pin 44 [SPDL_PDM]
[PLAY → STOP → PLAY]
V: 2V/div. H: 1sec/div.
TEL
TEL
5
C
IC301 - pin 55 [LOAD_DRV]
V: 1V/div. H: 500nsec/div.
[Tray stops]
6
http://www.xiaoyu163.com
5
7
8
4. PCB CONNECTION DIAGRAM
QQ 376315150 892498299
NOTE FOR PCB DIAGRAMS :
1. Part numbers in PCB diagrams match those in the schematic
diagrams.
2. A comparison between the main parts of PCB and schematic
diagrams is shown below.
Symbol In PCB
Diagrams
Symbol In Schematic
Diagrams
B C E B C E
Part Name
A
3. The parts mounted on this PCB include all necessary parts for
several destinations.
For further information for respective destinations, be sure to
check with the schematic diagram.
4. View point of PCB diagrams.
Capacitor
Connector
Transistor
B C E
B
C
E B
C
SIDE A
E
Transistor
with resistor
B C E
D
G S D
B
G S
Field effect
transistor
D G S
SIDE B
Chip Part
P.C.Board
TEL
TEL
Resistor array
13942296513
13942296513
3-terminal
regulator
QQ
QQ
SIDE A
SIDE B
A LOAB ASSY
A LOAB ASSY
VNP1836-C
LOAB
PNE-1B1
1
5
1
CN601
5
VWG
1
C102
C101
5
(VNP1836-C)
(VNP1836-C)
LOAD+
LOAD-
SW2
VWG2279VWG2346-
CN602
1 2
5
V+3D
(V+5D)
S101
5
CN601
1
E
CN601
B CN103
M
D
CN602
CN601
CN602
376315150 892498299
4.1 LOAB ASSY
GND
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
C
CN602
LOADING MOTOR
ASSY
www
.
A
x iao y u163. co m
F
A
XV-DV99
5
6
http://www.xiaoyu163.com
7
45
8
1
3
http://www.xiaoyu163.com
2
4
4.2 DVDM ASSY
QQ 376315150 892498299
Q929
Q211
C212
R213
Q212
L390
C393
C202 R204
Q202
R203 R214
C304
R833
R832
R831
R830
R829
UP SIDE
30
CN943
1
CN943
C757
R735
C870
C854
C874
C863
C853
D741
C857
R790
C758
R859
R858
C850
R869
R1002
R1001
R879
R737
R738
C877
LETTER
SQUEEZE
VSEL2
R773
VSEL1
C773
R794 GNDA
SR
C794
R793 GNDA
C793
SL
R758 GNDA
C756
LFE
R757
C755 GNDA
C
GNDA
FR
GNDA
1 FL
G
C851
R843
R844
R878
C871
R1003
C809
CN953
30
R722
1
D742
R774
C774
R789
C860
XV-DV99
2
C CN8301
R966
R965
R964
1
R967
C571
R571
R591
C1562
R1069
Q761 Q762
D743
R753
R755
R734
R739
C798
D
C797
D781
C799
R687
R691
R692
R684
CONTACT
SIDE
Q741
(ANP7480-A)
46
1
CN904
11
R111
R300
X301
R394
R592
Q742
R4
R3
R1
R2
C816
C815
C810
R836
C814
C811
C808
R837
E
R838
C801
IC801
R823
C830
R868
R828
64
R827
R826
C803
C802
R884
102
C813
A CN601
- +
1
AD AD 2 +3D W
LO LO SW V S
V+5D
R211
Q201
5
4
R378
R385
R386
R379
C564
R772
R768
R788
R792
D782
R787
R754 R791
R756
Q781
C795
R834
R887
R816
65
C812
R819
R820
CN103
C103
SIDE
5
CONTACT
1 CN103
R201
8
1
100
76
R369
R307
R360
C651
R636
Q764
R611
R608
R607 R618
R605
R606
Q782
R736
128
R882
R847 C824
R885
C861 R894
C864
C867
IC804
E
R760
R770
C750
C605
20
1
Q763
C1563 R561
R621
C614
1
R694
R695
R688
R685
R664
R689
29
C659
IC805
R807
R801
C231
C221
42
R131
C134
R135
R392
C390
RFOUT
R365
R366
R641
R665
R663
R769 R662
C649
C640
39
R767
R771
52
C648
105
4
1
1
R600
C600
R881
R880
R810
C804
R809
R808
R806
R813
R812
R815
IC481
C484
R1005
.
R617 R775
R616
x iao y u163. co m
C482
R482
C561
D761
C873
R895
65
R1006
R817
55
R818
102
R1004
38
B
1
H
R825
R603
R602
R590
R562
R890
R888
4
4
R886
R835
R824
1
103
www
4
1
1
C825
38
64
F
5
128
IC801
11
1
C4831
R804
C807
E
R848
8
1
3
4
R814
55
R681
C604
R619
R593
C1564
R682
R889
R893
39
IC481
24
2
30
R686
30
C828
10
IC806 IC804
29
1
R485
C805
C806
R811 R481
C481
7
23
2
R629
R672
20
11
R839
R805
C827
IC806
C698
C684
2 2
R883
C601
D601
CN608
IC805
R648
R634
R647
C637
R635
C623
1
C671
R595
R637
208
208
11
R803
R822
R821
R802
F
Q741
E
8
R421
C661
C357
R362
R638
R683
1
Q722
R721
C362
R594
C650
R639
C647
R626
C636
4
IC691 156
157
C691 5
157
IC601
C692
L691
R698
CN607
C660
Q781
Q742
R644
C421
R640
IC421
Q782
3
C305
SY 30
GNDD
V
GNDD
SC
GNDD
Cr/R
GNDD
Cb/B
GNDD
CY/G 20
RGB
P/XI
ASPECT
1
Q764
C139
C127
C128
C130
C323
C124
C126
C335
R346
R344
C348 C342
R657
R656
R652 R655
R651 R654
R653
R364
R675
53
52
1
R368
R309
R308
C664
C607
23
5
L411
L421
C422
Q761
ST2ST2+
ST1+
ST1C142
R338 R935
R342 D928
D922
SIDE
D402
R402
C406
C310
C309
R613 R612
C690 R609
R610
C619
C133
R123
R124
R389
R925 R924
R926 R923
Q922 Q923
D923
LOADLOAD+
C121
R197
Q193
R151
C151
C644
R192
C135 C102
CONTACT
SIDE
L192
L191
L194
L193
R932
R934
R933
D926
D925
IC401
R407
R410
1
CN609
C461
2 R461
L641
24
R658
C652
R398
R397
C681
104
IC411
IC461
C112
R905
R904
R903
R902
Q911
R984
R922
R901
R931
R906
R907
R400
4
4
3
3
5
C407
11
R416
R411 C409
L402
C113
CONTACT
SIDE
R952
R954
R956
R958
R953
R955
R957
R959
C921
R963
R960
R962 R961
C951
R951
D432
C451
C452
R433
IC901
8
C441 R444
C433
14
C463
9
R363
L361
53
7
1
D401
8
C411
R696
10
R336
C R337
R339
R340
C346
10
R354
9
C354
R628
X601
R969
QQ 3763 1515 0 89 2498 299
C301
156
IC421
Q762
Q763
75
C211
3
http://www.xiaoyu163.com
4
B
376315150 892498299
IC691
C423
C424
75
R673
IC604
C382
C377
R384
R383
R382
CN301
2
C373
R367
C630
C425
51
51
R361
105
24
23
IC601
25
C388
C622
IC604
C391
C383
R302
R396
Q928
104
D
1
100
NP
50
C694
C621
1
26
Q927 C
R697
C412
D
C326
C201
30
C415
C300
QQ
R693
C414
Q921
R341
C634
RFIN
25
R212
1
2
C413
B
C311
C318
B C306
IC301
LD2
11
D
R462
C641 R620
C642
C132
GNDD
R202
Q390
R390
C394
C392
R310
R301
R391
C302
Q930
R938
R939
R937
R936 R332
C307
C303
C312
R333
C315
C308
R334
1
376315150 892498299
Q722
2
1
2
CN123
IC201
LD1
50
QQ
C410
C462
1
A
C405 R403
Q401
C491
TEL 13942296513
IC411
IC461
1
R409
R408
A
Q927 IC301
Q928
D927
22
26
Q922
R196
R199
R220
R221
R222
C222
R223
13942296513
IC401
C434
C401
IC441
C442
R443
R442
R441
1
Q192
C901
R909
R908
8
5
44
1
IC101
Q925
CN124
Q926
4
Q390
Q923
Q930
14
C408
13942296513
11
IC431
R401 C432
C404
Q929
8
1
R191
R194
TEL
5
5
C403
IC441
Q401
Q921
7
R102
C114
R101
8
C431
7
7
Q202
Q193
R921
R918
C902
2
1
CN121
1
TEL
C
C443
Q902 Q925
IC901
Q926
IC101
Q192
IC431 IC201
Q201 Q211
23
SIDE
1717
C118
C116
C101
21
1
1
1
Q911
R982
CONTACT
C120
24
24
24
2
30
1
D431
CN101
1 1 CN104
44
1
UP SIDE
B
1
1
CN122
B
CN105
C
24
UP SIDE
Q451
Q951
Q921
R981
Q951
CN101
5
R451
Q451
UP
CN921 R983
1
1
V+5S
GNDD
H1+ H3A1 H3+
A2 H2A3 H2+
H1-
A
12
12
1
CN901
1.INSIDE
1
30
30
CN104
R968
CN105
SIDE A
PICKUP ASSY-S
CN1013
23
CN901
CN5604
STEPPING
MOTOR
2
H
SPINDLE
MOTOR
1
B DVDM ASSY
BOTTOM SIDE
SIDE A
BOTTOM SIDE
A
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
SIDE B
SIDE B
A
B DVDM ASSY
UP SIDE
UP SIDE
UP SIDE
CN931
LF
24
24
CN111
R1012
1
30
11
1
17
17
1
30
30
CN941 2 2
1
C232
R1013
HEAT-RESISITANCE
PRE-FLAX
30
CONTACT
SIDE
22
R1011
30
23
23
1
CONTACT
SIDE
11
29
CN911
A
B
C
14
1
28
54
0 1 2 3 4 5 6 7 8 9
GNDS
V+3D
CLAMP
DISCSENS
TRYPOS
OPEN
SEDR+
SEDR-
27
1
1
13
C903
R690
10
11
1
R744
R746 C742
R748
20
R785
C783
R781
C752
R782
C784
C862
1
C866 20
R863
R862
R861
C785
R783
R752
C748
R786
C746
R750
R784
C786
C865
10
11
R867
14
R645
R643
R646
C744
R742
C856
F
C823
IC741 IC781
IC861
C822 R896
R841
28
54
28
1
4
1
1
1
R483
IC807
6
http://www.xiaoyu163.com
IC803
C821
R842
C820
C819
C817
C818
C826
IC802
IC871
27 27
1
R840
R845
IC851
IC802
IC803
4
8
C872
IC871
5
1
20
C829
R872
R871
R870
C788
C782
5
C787
C781
C875
1
R873
54
R860
8
10
11
10
R866
R865
11
C876
20
IC761
E
F
B
XV-DV99
5
IC603
D
24
(ANP7480-A)
B
Q603
Q745
Q744
1
1
26
1
0
2
0
1
0 1 2 3
8
15
14
28
Q511
Q977
R422
C626
C639
C625
C643
D603
R633
R632
R649
R650
R601
R604
C792
R864
15
7
R630
R666
C764
R762
C767
C768
8
14
28
1
R417
R625
ICT FC
C762
1
5
R874
R875
R876
IC602
IC603
1
R846
IC807
Q541
25
C603
IC861
1
5
Q551
376315150 892498299
R622
C749
C789
F
R877
Q531
Q501
R671
R631
C
QQ
R414
R415
R615
R627
Q603
R699
54
13942296513
L401
R404
R181
C181
R177
C177
R180
R179
R614
R623
R413
R670
C791
C754
8
3
4
1
2
3
4
5
6
7
8
9
Q521
C624
TEL
14
R183
R169 R170
C171
R171
R166 R168
C631
C633
C632
1
R642
x iao y u163. co m
IC851
28
R853
R852
C602
1
2
3
4
5
6
7
8
9
Q746
4
R759
4
.
R154 C155
R156 R155
D924
R661
R660
R659
R512
28
R674
C761
1
C741
C855
C852
R857
R850
C628
R766
C753
C751
R749
R745
R741
www
R851
R856
R855
R854
C620
R1623
1
2
3
4
5
6
7
8
9
R624
R502
R513
8
1
R779
C763
R761
C747
R751
R747
C743
15
C859
C858
R178
48
IC741
C745
R743
DVDM ASSY
R412
R765
IC781
IC151
IC602
R764
C772 C766
Q745
Q746
Q744
C765
R763
IC761
C769
SIDE
R930
R929
R928
R927
27
Q977
C771
C501
R501
C511
R511
R977
R740
R970
R972
R974
R976
C163
C176
R176
R175
R173
C174
R523
R503
R522
C562
C172
R172
C635
C627
C638
C629
R543
1
R1056
R1057
R1058
R1059
R1060
R1061
R971
R973
R975
R157 C158
R159 R158
C160
R164
R165
R142
R143
R355
14
28
C521
R521
Q924
R405
D403
25 25
27
27
R167 C167
R174
R542
C563
1 IC151
QQ 3763 1515 0 89 2498 299
R533
R552
R553
R541
R152
R153
C152
26
Q194
AWM7 0 0 0 -A
R532
C565
IC501
15
CONTACT
SIDE
UP SIDE
376315150 892498299
C1056
C402
C182
R182
R9531 Q531
R9551 Q551
R9541 Q541
R9521 Q521
R9501 Q501
R9511 Q511
C531
R531
C551
R551
C541
R431
R432
R163
13
IC911
Q191
R406
R375
D301
1
1414
TEL 13942296513
C1051
C1052
C1053
C1054
C1055
2
B
C913
C911
R917
C355
R381
C313
R374
R916
R162
C161
R195
R198
R343
C381
R345
R387
QQ
R370
R376
8
R330
R331
R380
R373
CN113
Q194
R126
R128
R329
R328
R395
1
7
IC911
Q924
R306
R399
R1970
CN114
R304
R303
R393
88
Q452
R454
R914
R161
R160
R125
13942296513
R113
R112
R189
R100
R127
C214
C213
11
R193
Q191
R144
C125
C204
C203
TEL
R118
R119
R120
R115
R116
R117
R106
R107
R108
R452
R915
R190
R103
R104
R105
R305
C200
R200
CONTACT
C199
C215
C205
R110
R109
CN112
R210
C210
NORMAL SOLDER
LEAD FREE SOLDER
R388
VPR+8M
SYS_CS2
GNDM
SCLK
GNDM
SDATA
GNDD 30.VDVD+12
MDATA
VPR+8
GNDD
ACK
VPR+8
DOUT
10.GNDD
VPR+8M
20.GNDD
GNDD
GNDD
VDET
DVDPOWER
ZERO
XDVDRST
DVDMUTE
SYS_CS1
Q452
XVMUTE
TXD
R453
RXD
RTS
R912 1.CTS
R911
R913
C912
C230
D921
CONTACT
SIDE
C233
7
47
8
1
3
http://www.xiaoyu163.com
2
4
4.3 VIDEO and DSP TRADE ASSYS
A
QQ 376315150 892498299
SIDE A
C VIDEO ASSY
R
R
GP1FA5
5
C8865
2
R8348
C83
R8313
C8
C8
E
1
1
376315150 892498299
P
DTERM ASSY
COMPONENT ASSY
CN55
1/2
9
1
2
3
4
5
6
8
2
1
W118
GNDD
FR1S P
GNDD
COMPONENT ASSY
AWU8116
W117
CN8962
W119
GNDD
GNDD
W122
GNDD
W121
5
FR1S P
CN8951
JA8951
5
GNDD
W123
AWU8117
CN8961
W116
GNDD
1
W120 GNDD
DTERM ASSY
7
CONTACT SIDE
CN8951
1
CN8961
1 1
7
1/2
E
(ANP7482-A)
(ANP7482-A)
Q8873
Q8871 Q8872
F
C
www
.
Q8842
Q8841
Q8832
Q8831
IC8862
IC8861
IC8251
Q8321
x iao y u163. co m
XV-DV99
48
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
515 0 89 2498 299
QQ 376H3 1CN8401
CN8302
QQ
QQ
P
C83
R8345
R8314
C8316
FL
DSPOUT
C8315
TEL 13942296513
D
C
R8312
FR
CN8302
B CN943
R8346
R8347
C8343
SL
GNDA
CN8301
R8255
C8258
1
Q8321
R8319
VA+12
C8363
AWU8106
SR
CN8303
C
CN8302
7
8
AWU8104
C8344
GNDD
18
C8364
SW
R8311
11
VA-12
C8257
VIDEO ASSY
AWU8100
R8322
C8321
C8813
30
30
14
14
R8257
C8260
C8801
C8802
C8868
C8867
C8863
C8884
11
R8256
C8261
R8321
R8833
CN8301
C8812
C8862
R8862
R8876
D8871
R8875
R8848
Q8842
R8841
D8841
Q8831
C8832 R8832
R8831 C8831
C8864
C8879
CN8811
7
CN8812
C8811
Q8832
R8849
3
IC8861
30
7
R8844
R8842
R8843
C8882
C8843
R8845
C8842 R8847
R8846
1
IC8251
30
R8883
C8883
JA
VD+5
13942296513
CN8812
Q8841
Q8872
6
C8252
TEL
13942296513
1 1
C8841
3
IC8862
C8861
4
JA8252
JA8251
CN8802
12.GNDA
11.SCRTOR
10.GNDA
9.SCRTOL
8.GNDA
7.LIN
6.GNDA
5.RIN
4.GNDA
3.SCRTIR
2.GNDA
1.SCRTIL
R8835
4
30.S Y
29.GNDD
28.S V
27.GNDD
26.S C
25.GNDD
24.Cr/R
23.GNDD
22.Cb/B
21.GNDD
20.CY/G
19.PGB
18.P/XI
17.ASPECT
16.LFTTER
15.SQUEEZE
14.VSEL2
13.VSEL1
12.GNDA
11.SR
10.GNDA
9.SL
8.GNDA
7.LFE
6.GNDA
5.C
4.GNDA
3.FR
2.GNDA
1.FL
TEL
(D-CONECTOR)
CN8811
(COMPONENT)
6
1
C8881
Q8871
R8894
Q8873
R8891
B
R8834
R8892
R8889
R8893
R8890
JA8871
1
JA8801
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
SIDE A
R
A
GP1FA5**RZ
DC FC
ATTENTION
CN8901
D CN8003
CN8902
D CN8007
CN8901
2323 1
1 23
23
CN8902
CN8904
1
1 23
2323 1
DSP TRADE ASSY
CN8904
CN8906
23
1
1
12323
D CN8011
CN8903
CN8903
23
1 123
CE3
CN8905
AWU8101
CN8907
CN8907
REPLACE WITH
SAME TYPE
#49101.5F FOR
IC5601 MFD.
1
BY LITTELFUSE
INC.
1
R8388
D1003
C1006
CAUTION
C1014
D1005
C1013
C1004
C1011
C1012
L1002
C1005
IC1003
(ANP7481-B)
KN8802
R1002
D1004
R8901
C8909
R8905
C8913
IC8382
R8389
Q8381
IC1002
L1001
IC5601
CN8906
R8906
C8914
R8380
R8383
R8382
R8387
R8386
IC8381
D8383
D8382
CN8908
Q8383
C1003
R8385
R8384
1
1
30
30
Q8382
49101.5
AEK7065
376315150 892498299
IC5601
1919
16.DECMUTE
17.DSPMUTE
18.DSPMUTEW
19.0MUTE
20.DVDMUTE
21.GNDU
22.GNDU
28.VD+5
29.XPROTECT
30.VA-12
C8392
1
7.DIRCS
8.DIRDO
9.DSPMODE
10.DSPHREQ
11.DSPSS
12.DSPRST
13.DSPCK
14.DSPDO
15.DSPDI
R8391
R8392
1
23.OPTIN
24.GNDDR
25.GNDDR
26.VPR+8
27.VPR+8
1919
C8391
1.AUDIOSELA
2.XTVMUTE
3.DIGSEL
4.XTLO
5.DIRERR
6.DIRRST
CN8908
9
376315150 892498299
CN5502
C8905
QQ 3763 1515 0 89 2498 299
8
8
C8310
C8309
9
TEL 13942296513
R8317
H
C8386
C8385
R8337
R8333
R8302
R8304
R8318
C8383
C
QQ
R8307
C8384
8
8
QQ
R8306
C8313
R8308
4
16
1
C8387
C8903
11
R8313
5
C8906
16
R8311
R8312
IC8301
8
C8314
C8388
1
R8345
R8314
R8335
4
R8305
R8301
R8303
1
C8341
R8903
C8911
R8904
C8912
C8901
C8342
R8381
R8336
R8332
R8334
C8904
D8391
D8392
R8331
R8368
R8367
R8338
R8348
4
1
R8347
1
13942296513
5
R8358
R8356
R8352
R8357
R8355
R8351
R8353
B
TEL
R8365
IC8302
8
5
13 13
C
8
11
13942296513
U8106
R8346
C8902
IC8303
C8361
C8363
1
C8362
CE3
1
R8366
C8364
DSP TRADE
ASSY
1
EN CAS REMPLACEMENT
DES FUSIBLES IC5601
N'UTILISER QUE LA
REFERENCE 49101.5F DE CHEZ
LITTELFUSE INC.
30.FL
29.GNDA
28.FR
27.GNDA
26.SW
25.GNDA
24.C
23.GNDA
22.SL
21.GNDA
20.SR
19.VA+12
18.SBL
17.GNDA
16.SBR
15.MIXR
14.GNDA
13.MIXL
12.GNDA
11.SCRTOR
10.GNDA
9.SCRTOL
8.GNDA
7.LIN
6.GNDA
5.RIN
4.GNDA
3.SCRTIR
2.GNDA
1.SCRTIL
TEL
CN8302
C8257
R8902
C8910
R8261
SW
E
C8264
CN8905
JA8253
D
A8252
+5
D
E
(ANP7481-B)
IC8302
IC8301
www
IC8303
IC8381
x iao y u163. co m
IC5601
.
IC8382
Q8381
Q8382
Q8383
IC1003
F
C E
XV-DV99
5
6
http://www.xiaoyu163.com
7
49
8
1
A
3
http://www.xiaoyu163.com
2
4
QQ 376315150 892498299
SIDE B
C VIDEO ASSY
DSP TRADE
ASSY
1
1
CN8901
CN8907
CN8908
CN8905
CN8903
CN8905
19
1
CN8906
CN8907
CN8902
CN8906
CN8904
1
1
CN8902
CN8904
13
C8908
C8907
19
(ANP7481-B)
Q5603
R8909
R8913
Q8901
R8911
R8912
D5602
D5603
R8914
Q5602
R5609
R5608
Q5601
D5604
Q8903
R8908
E
Q8902
R8910
D5601
D8901
D8902
R8907
Q8901
Q5603
Q8902
Q5601
Q8903 Q5602
www
F
C E
.
Q8351 Q8352
x iao y u163. co m
XV-DV99
50
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
23
1
20.DSPDI
21.DECMUTE
22.MUTE
23.MUTE_OUT
QQ
1
R8341
R8339
R8343
C8335
C8340
C8333
C8337
C8331
C8307
C8305
C8312
R8309
C8303
C8301
QQ 3763 1515 0 89 2498 299
13942296513
R8369
C8332
R8361
R8363
C8355
C8311
C8308
C8306
R8310
C8304
C8302
1
8.XTLO
9.DIRERR
10.DIRRST
11.DIRCS
12.DIRDO
13.DSPMODE
14.DSPHREQ
15.BUSY
16.DSPSS
17.DSPRST
18.DSPCK
19.DSPDO
1 23
DSP TRADE ASSY
AWU8101
CN8903
Q8352
Q
C8381
23
1.GNDA
2.C
3.GNDA
4.SBRO
5.GNDA
6.SBLO
7.GNDA
TEL
C8334
C8338
R8359
R8370
R8342
R8340
C8339
R8344
C8336
R8258
R8259 C8255
C8262 C8256
C8263
R8262
R8260
L8254
C8265
C8359
L8253
Q8351
Q83
C8382
23
1 23
CE3
376315150 892498299
D
1
1 23
QQ
TEL 13942296513
1.GNDD
2.LSSN
3.XTLO
4.DIRERR
5.DIRRST
6.DIRCS
7.DIRDO
8.DSPMODE
9.DSPHREQ
10.BUSY
11.DSPSS
12.DSPRST
13.DSPCK
14.DSPDO
15.DSPDI
16.DECMUTE
17.MODC
18.MUTE
19.MUTE_OUT
C8360
C8357
C8351
C8352
C
1.RIN
2.GNDA
3.LIN
4.GNDA
5.FR
6.VCOMG
7.FL
8.RECMUTE
9.SR
10.GNDA
11.SL
12.GNDA
13.SW
14.GNDA
15.C
16.GNDA
17.SBRO
18.GNDA
19.SBLO
C8358
C8356
C8353
13942296513
C8354
23 1
7.DIN
8.VD+5
9.VD+5
10.VA+5
R8360
11.RIN
12.GNDA
13.LIN
14.GNDA
15.FR
16.VCOMG
17.FL
18.RECMUTE
19.SR
20.GNDA
22.GNDA
21.SL
23.SW
1.DOUT
2.UGRTN
3.UGRTN
4.OPTIN
5.DGRTN
6.DGRTN
1.OPTOUT
2.UGRTN
3.OPTIN
4.DRGTN
5.OPTIN
6.GNDD
7.GNDD
8.VD+5
9.VD+5
10.NC
11.NC
12.VA+5
13.NC
1 23
TEL
CN8901
CE3
CN8908
E
B
E
CN8961
7
1
R8961
1.Y
7.NC
6.ASPECT
5.I/P
4.GNDD
3.Cr
2.Cb
DTERM ASSY
AWU8117
CN8951
C8963
C8962
R8963
C8961
R8964
4.GNDD
FR1S P
5
R8962
376315150 892498299
1
5.NC
L8951
C8951
1.Y
C8952
QQ
CN8961
51
XV-DV99
CN8812
(D-CONECTOR)
CN8811
(COMPONENT)
13942296513
R8812
R8815
R8813
R8816
CN8951
L8952
TEL
1
R8822
R8819
R8817
R8818
R8821
C8890
C8886
C8878
C8877
C8871 R8877
C8872 R8878
R8882
C8876
C8875
R8881
R8899
R8896
R8886
C8889
C8885
R8898
R8895
R8885
3.Cr
2.Cb
C8953
R8811
R8814
7
R8873
R8861
D8861
C8891
C8887
R8900
R8897
R8887
R8879
C8873
C8874
R8880
R8872 R8874
R8871
D8862
D8863
R8801
R8315
FR1S P
L8953
QQ 376315150 892498299
(ANP7482-A)
C
D
DTERM ASSY
COMPONENT ASSY
AWU8116
376315150 892498299
8
http://www.xiaoyu163.com
R8820
R8884
D8864
R8863
C8866
R8888
B
L8801
R8803
R8806
R8802
R8805
R8316
CN8302
A
SIDE B
C
R8393
R8394
R8341
R8339
R8343
C8335
C8340
QQ
TEL 13942296513
1
21
C8803 R8804
C8805
L8803
C8804
L8802
R8350
R8349
CN8301
(ANP7481-B)
CN8301
Q8301
7
6
5
C8259
R8254
R8251
R8252
C8254 C8251
C8253 L8252
R8370
Q8331
13942296513
Q8332
Q8331
Q8302
Q8301
QQ 3763 1515 0 89 2498 299
CN8302
AWU8106
AWU8104
AWU8100
P
COMPONENT ASSY
P
VIDEO ASSY
Q8332
2
20
Y
Cb
Cr
GNDD
I/P
ASPECT
NC
R8369
Q8302
F
x iao y u163. co m
.
www
L8251
R8253
R8258
R8259 C8255
C8262 C8256
C8263
R8262
R8260
L8254
L8253
C8892
TEL
Q8352
Q8351
8
7
6
http://www.xiaoyu163.com
5
(ANP7482-A)
Q8351 Q8352
FC ICT
4
I
C8554
C8550
C8551
R8601
L8601
R8606
17 IC8603
32
C8547
C8602
R8530
CN8015
CN8016
C8604
C8603
IC8601
R8605
L8603
7 C8601
C8610
7
H C T-163
94V-0
16
C8613
C8609
1
KN8501
I
R8608
C8528
C8530
109
F
17
R8332
R8333
R8336
R8346
R8337
R8810
R8805
R8556
R8557
C8511
R8514
R8513
R8512
R8511
G IC8501
5
IC8502
C8549
R8550
R8531
C8522
1
C8513 CN8018
C8512
G
R8554
C8701
C8422
IC8401
IC8301
R8406
1 R8345
23
CN8007 CN8009
CN8008 CN8010
33
E
C8407
C8423
R8405
CN8007
19 C8415
R8543
L8402
IC8702
Q8504
6
E
CN8011
CN8012
CN8013 CN8014 IC8701
H
R8506
F
11
R8335
R8329
E
R8330 R8704
R8331 R8701
R8702
C8301
C8302
R8519
R8521
R8522
C8504
C8509
C8507
JTAG
144
144
C8523 C8515
Q8501
CN8011
R8803
R8804
H
C8541
C8525
C8524
19
1
C8527
C8526
C8533
C8537
C8536
L8504
C8532
D8401
L8203
D
IC8201
C8226
R8229
R8231
C8222
D
CN8017
10
C8406
R8207
B
9
C
R8110
C8107
R8107
R8102
C8218
R8226
C8108
R8103
C8113
R8111
R8109
C8112
R8705
R8707
R8706
R8708
CN8001 CN8004
CN8002 CN8005
CN8003 CN8006
C8901
CN8003
R8213
R8214
R8215
R8209
R8225
13
A
X8201
R8204
25
36
36
R8203
C8209 R8210
L8201
C8210
A
B
1
R8017
C8408
C
C8704
E
E
CN8903
(ANP7022-B)
XV-DV99
4
D
376315150 892498299
8 5
8
4
1
1
C8503
R8502
R8501
R8503
C8543
C8706 C8705
CN8901
QQ
17
R8802
R8524
R8552
R8553
R8539
C8545
R8533
R8534
R8339
36
1 C8505
C8418
C8420
C8546
C8703
C8702
22
CN8019
R8703
R8412 R8416 C8421 C8419
11
R8413
L8301
R8414
R8328
44
34
C8404
C8225
R8211
R8223
C8213
R8222
R8016
R8216
L8202
R8404
C8212
R8230
C8221
48
37 C8201
C8516
11
J
R8411
C8202
Q8341
6
1
22
R8219 L8205
R8227
C8219
L8702
R8410
R8206 R8205
D8501
R8409
R8408
C8904
C8223
R8232
C8217
1
KN8201
JA8102
X8501
KN8102
KN8101
SIDE A
13942296513
1
J C8548 R8540 R8541
3
http://www.xiaoyu163.com
TEL
20
20
http://www.xiaoyu163.com
3
15 15
2
108
23
52
22
1
x iao y u163. co m
22
1
.
498 299
QQ 3763 1515 0 89 2CN8902
12
44
D
www
8
1
F
IC8601
73
8
10
IC8502
11
10
E
10
9
1
IC8501
9
15
IC8701
16
11
D
72
IC8603
1
37
Q8501
11
R8551
3
99
376315150 892498299
TEL 13942296513
IC8401
20
1
Q8341
IC8301
12
QQ
IC8702
Q8504
24
C8405
1
13942296513
C
13
C8105
TEL
IC8201
L8204
C8215
C8214
B
C8001 C8902
R8009
C8002 R8010
R8015 C8004
C8003
A
2
JA8101
JA8103
1
4
4.4 DSP ASSY
D DSP ASSY
QQ 376315150 892498299
SIDE A
1
2
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
SIDE B
SIDE B
A
D DSP ASSY
C8006
R8019
R8538
R8221
D8303
GND
OUT
R8220
R8212
Q8503
IN
OUT
GND
IN
C8008 C8216
R8334
C8010
D8502
D8402
GDAC
1
Q8503
R8558
4
IC8503
5
R8340
19
R8341
D8301
D8302
R8343
R8344
R8321
R8320
R8544
R8542
R8536
R8546
R8545
L8501
R8322
R8308
C
R8504
R8555
R8507
R8508
R8509
R8510
C8544
R8518
R8517
R8516
R8515
C8542
V11
C8540
GNDD
C8514
R8528
R8312
R8313
R8314
R8326
R8529
C8539
C8538
C8529
17
E
AWX8251
AWX8252
AWX
AWX8241
IC8602
1
C8014
C8013
C8608
C8607
1
32
AWX8240
F
AWX8253
AWX8254
AWX8255
AWX8239
7
x iao y u163. co m
C8606
C8605
(ANP7022-B)
D
XV-DV99
5
6
D
AWX1082
AWX1083
C8531
R8602
R8537
L8502
AWX8250
19
R8603
L8602
6
C8534
C8535
R8801
R8812
R8811
R8813
R8523
R8309
C8520
R8310
C8521
R8311
C8518
V3
17
PRODUCTION CODE
CN8011
R8526
C8517
R8527
R8520
R8505
16
1
L8701
R8809
L8801
D
376315150 892498299
1
GNDD
15
C8007
R8547
R8548
R8549
IC8503
8
C8401
C8009
C8417
C8501
C8502
R8532
R8018
R8338
C
376315150 892498299
QQ 3763 1515 0 89 2498 299
C8402
C8403
R8415
R8417
R8806
R8807
C
QQ
D8503
L8505
C8553
C8552
GNDD
QQ
CN8007
IC8902
R8113
C8211
C8555
R8808
.
R8115
R8114
C8205
C8206
C8207
13942296513
13 15
C8903
R8006
L8401
TEL
8
8
7
B
9
13942296513
R8234
C8224
R8407
www
C8011
R8224
C8204
R8202
IC8101
IC8901
C8012
C8208
C8203
R8233
R8201
R8401
R8402
R8403
C8409
C8410
C8411
C8412
C8413
C8414
C8416
R8104
R8105
R8116
IC8101
GNDD
IC8902
TEL 13942296513
B
C8220
R8228
L8004
R8004
L8003
R8003
L8104
R8112
L8103
14
IC8901
14
C8005
R8011
C8115
C8110
C8109
L8002
R8002
R8001
L8001
L8102
C8114
1
A
1
TEL
CN8003
C8111
R8108
A
R8014
R8013
R8012
GCH
R8007
R8008
B
R8005
L8005
C8106
R8106
L8101
C8104
http://www.xiaoyu163.com
7
53
8
1
2
3
http://www.xiaoyu163.com
4
4.5 FM/AM TUNER MODULE
A
QQ 376315150 892498299
SIDE A
SIDE A
F
FM/AM TUNER MODULE
B
TEL
TEL
13942296513
13942296513
C
SIDE B
F
(ANP7338-B)
Q202
SIDE B
FM/AM TUNER MODULE
CN201
D
E
F
F
www
.
x iao y u163. co m
(ANP7338-B)
Q201
IC201
Q203
IC202
Q205
Q204
XV-DV99
54
1
2
3
http://www.xiaoyu163.com
4
F
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
CN201
QQ
QQ
G CN5702
6
http://www.xiaoyu163.com
5
7
8
4.6 KEY RTOP, KEY R, KEY L and KEY LTOP ASSYS
QQ 376315150 892498299
SIDE A
SIDE A
N KEY L ASSY
(ANP7482-A)
A
M KEY R ASSY
KEYL ASSY
AWU8110
STBY
1/2
KEYR ASSY
AWU8112
1/2
D1901
OPEN/CLOSE
(ANP7482-A)
W107
J1903
KEY1
FR1S P
FR1S P
S1904
S1901
6
J1991
6
1
1
1
J1902
1
7
GNDD
W108
1
3
W106
KEY1
7
1
5
7
1
7
E
S1906
CN1902
FR1S P
VOL +
VOL -
CN5601
J1901
KEYRTOP ASSY
AWU8113
KEYLTOP ASSY
AWU8111
H
F
S1902
S1903
S1905
Production Code
1/2
(ANP7482-A)
(ANP7482-A)
KEY RTOP ASSY
L
KEY RTOP ASSY
99 B
QQ 3763 1515 0 89 2498 2SIDE
TELSIDE13942296513
B
O KEY LTOP ASSY
VOL +
2.GNDU
1.KEY1
5.TMRLED
4.GNDLED
3.VE+5
1.NC
3.GNDU
2.KEY1
4.KEY1
5.VE+5
7.GNDLED
6.TMRLED
1.KEY1
2.GNDD
3.KEY1
FR1S P
1
1
KEYRTOP ASSY
AWU8113
R1904
R1905
R1903
R1902
VOL 3
FR1S P
1
AWU8111
5
KEYLTOP ASSY
7
(ANP7482-A)
376315150 892498299
D
(ANP7482-A)
CN1908
CN1903
2.KEY1
1.NC
4.KEY1
3.GNDU
6.TMRLED
5.VE+5
7.GNDLED
OPEN/CLOSE
4.VE+5
5.TMRLED
6.GNDLED
3.KEY1
2.GNDU
1.KEY1
1
KEY1
R1901
x ao y u163
. co m
M
KEYL ASSY
AWU8110
(ANP7482-A)
FR1S P
STBY
E
CN1904
7
1.KEY1
2.GNDU
3.KEY1
4.VE+5
5.TMRLED
6.GNDLED
R1909
R1907
1
1
KEYR ASSY
AWU8112
Q1904 3.KEY1
2.GNDU
1.KEY1
3
6
A
GNDD
KEY1
www
FR1S P
(ANP7482-A)
CN1905
1
R1911
CN1906
B
CN1907
CN1902
6
376315150 892498299
L
C
QQ
QQ
O KEY LTOP ASSY
13942296513
13942296513
FR1S P
3
J1993
5
6
1
1/2
CN1902
TEL
TEL
CN1903
CN1908
1
B
CN1904
1
CN1905
1
1
CN1906
6
1
CN1907
1
J1992
. L ASSY
i
N KEY
L M N O
F
KEY R ASSY
L M N O
XV-DV99
5
6
http://www.xiaoyu163.com
7
55
8
R3931
R3929
R3927
R3928
R3930
R3932
1
1
R3925
R3923
R3921
L3906
R3922
R3924
R3926
R3919
R3917
R3915
R3916
R3918
R3920
C3912
HP L
GNDHP
HP R
VA-12
VA+12
HPDATA
HPCLK
HPCE
VE+56
GNDD
XHPMUTE
HPDET
NC
KN3901
C5705
C8025
NP
R8609
C8613
13
13
Q8601
AWU8148
AWU8099
AWU8107
CN8401
NP
1 1
C5707
1
C3911
CN3901
R8611
C8615
C8060
1
4
IC8003
C8056 R8026 C8024
8
AWU8150
CONTROL ASSY
AWU8103
AWU8108
AWU8149
W104
GNDX
R8657
VX+10
11
16
C8661
11
16
R8025 C8023
Q8006 Q8005
13 13
11
R8214
19
AWU8105
AWU8109
8
8
9
8
8
9
8
8
9
IC8002
16
IC8201
W103
1
IC8602
RDSDATA
IC8652
R8659
R8660
6
C8068
C8067
W105
C8657
C8614 R8612
R8610 C8616
VD+5
10
JA8201
CN1701
R3905
R3906
C1701
Q8012
5
IC8601
R8018
W102
20
1
C5711
C8658
IC8651
JA8002
C8021
C8061
D8002
AWU8153
AWU8158
C8022
1
R8658
R8666
1
C8662
CN5605
C8522
Q8011
5
R3909
6
1
C3909
C3907
5
4
C3908
R3910
RDS
10
376315150 892498299
C5706
QQ
D3902
IC3902
R3911
8
1
R3912
C3910
W101
R8654
C8654
R8652
C8659
R3955
R3956
R3902
R3904
R3903
R3901
10
19
IC8001
19 19
C3935
13942296513
C8656
R8656
C8660
R8651
C5702
C8514
5
4
C8653
R8653
C8651
C8652
30.FL
GNDA
FR
GNDA
SW
25.GNDA
C
GNDA
SL
GNDA
20.SR
VA+12
SBL
GNDA
SBR
15.MIXR
GNDA
MIXL
GNDA
SCRTOR
10.GNDA
SCRTOL
GNDA
LIN
GNDA
5.RIN
GNDA
SCRTIR
GNDA
1.SCRTIL
R8601
R8605
R8604
R8603
D8601
R8602
CN8401
TEL
R8518
8
1
R8655
C8655
C8602
C8605
C8607
C8606
R8607
C5701
8014
8009
C8618
C8617
R8213
R8615
R8616
C8619
CN5605
8006
8009
D8004
R8665
C8034
C8033
C8601
9
R8212
CN5701
IC8601
D8005
Q8010
R8063
C8032
C8031
C8603
16
8
8
R8058
R8059
1 1
376315150 892498299
3
C8604
R8608
11
C8214
C8620
R8051
C8058
C8062
QQ
4
http://www.xiaoyu163.com
30
30
C8026
5
C
D8001
C8057
13942296513
XV-DV99
56
R8020
R8052
R8053
R8019
R8055
R8057
C8053
C8052
TEL
G H I
2
1
Q8005 Q8006
IC8003
IC8602
Q8601
IC8201
IC8002
IC8001
(ANP7481-
CN1701
(ANP7482-A)
Q8010
IC8651 Q8009 Q8014
IC8652 Q8012 Q801
x iao y u163. co m
.
C3916
C3904
C3903
R3907
R3908
C3918
L3902
C3914
1/2
JA3901
D
C3913
FR1S P
C3915
L3901
C3902
C3942
IC3901
C3906
C3905
C3917
10
E
R3913
C3930
C3901
C3933
C3940
HP ASSY
AWU8102
CE3
R3914
TXTRADE ASSY
AWU8114
AWU8115
AWU8152
KN5701
CN5702
C
CN3901
Q3910
IC3901
IC3902
www
F
CN5702
X5701
4
Q3910
F CN201
D
1
I
TEL 13942296513
5
HP ASSY
0 89 2498 299
QQ 3763 15C15CN8302
G TXTRADE ASSY
8
B
11
C
DC FC
CN5701
QQ 376315150 892498299
H CONTROL ASSY
SIDE A
A
4
3
http://www.xiaoyu163.com
2
1
4.7 TXTRADE, CONTROL and HP ASSYS
A
D8003
C8211
JA8001
R8017
http://www.xiaoyu163.com
6
7
IC8506
Q5201
IC1001
IC8502
IC8402
IC8401
IC5501
x iao y u163. co m
IC8505
IC8501
8
57
H I
IC1004
CN3902
F
(ANP7481-B)
CN5604
11
1
1
13
CN3902
VE+56
CN5601
13
R5506
R5515 R5507
UTEST
X5501
TEST
E+5
30
30
IC5501
C5603
C5604
1 1
1
CN55017
31
31
50
50
14
B
15.DSPDI
DSPDO
DSPCK
DSPRST
DSPSS
10.DSPHREQ
DSPMODE
DIRDO
DIRCS
C8401
8
C8402
1
7
R8504
C8504
R8524
C8528
GNDM
VPR+8
7
CE3
30.VA-12
XPROTECT
R5585
R5573
R5571
R5572
R5566
R5556
DIRRST
5.DIRERR
XTLO
DIGSEL
XTVMUTE
1.AUDIOSELA
C8403
C8411
R8421
C8409
IC8402
VPR+8
IC8401
C8410
IC8501
IC1001
IC1004
GND
OUT
IN
IC8502
R8508
C8532
UN+56
IC8506
C8530
GNDD
For service
point
short
GNDA
Q8402
Q8403
R8405
R8401
R8402
R8425
Q8401
Q8406
R8407
IC8505
C8533
D8517
D8519
R8404
R8409
R8513
C8515
IC8503
GNDM
C8529
C8535
D8523
Q8404
IC8652
R8659
R8660
Q8407 Q8405
C8520
IC8504
D8512
C8521
D8509
D8515 D8511
D8513
C8524
D8514
D8516
C8658
R8658
C8522
Q8011
C8518
IC8651
C
11
R5205
Q8012
D8510
CN8501
8
8
20
CN5602
Q8014
Q8009
C8662
20
CN5201
1
9
1
16
C8534
D8518
R5206
For
service
short
point
D8521
VPR+12
D5206
C8517
C8531
C8536
D8524
D8522
D8520
C5203
C5575
D5205
D5202
D5201
D5203
CN5603
1
D8006
D8009
7
1
C5578
CN5502
QQ
13942296513
TEL
B
L5571
C5204
D
C
C5572
C5576
C5206
L5202
Q5201
L5203
R5201
123.0mm
Knife Line
D1006
C1010
C1001
C1007
C1002
D1001
5
D1002
R5204
8
4
R8526
R5202
VA-12
R5575
R5574
80
51
0MUTE
MUTEOUT
DSPMUTE
DECMUTE
R5570
PRODUCTION CODE
C5606
C8539
5
C8541
8
4
R8502
R8510 R8506
1
1
R8528
C5607
R8422
C8412
C8538
R8522
CN8908
R5530
R5529
VD+5
R5584
VPR+8
R5583
R5582 VPR+8
25.GNDRTN
R5581
GNDRTN
R5580
R5579 OPTIN
GNDU
R5578 GNDU
R5577 20.DVDMUTE
R5576
R5531
R5532
R5541
R5540 R5533
R5534 R5535
R5536
R5537
R5538
R5539
R5599
R5542
4
L5201
C
376315150 892498299
CN5601
E
L
123.0mm
Knife Line
C5510
R5526
R5544
R5546
R5548
R5550
R5552
R5553
R5545
R5551
1
Q5202
CN5501
A
CN1902
C5507
R5547
R5549
R5558
R5560
R5564
R5565
R5562
R5554
R5555
R5557
R5559
R5561
R5563
C8537
C8404
C8502
5
8
C8526
5
8
KN1001
1.CTS
R5525
R5524
R5523
R5522
R5521
RTS
RXD
TXD
5.XVMUTE
DVDMUTE
ZERO
VDET
GNDD
10.GNDD
R5520
R5519
R5518
R5517
R5516
MDATA
SDATA
SCLK
ACK
C5605
51
5
L5204
L5205
D8004
5
5
R5528
100
100
81
81
R5568
R5569
R8509 R8505 R8501
C8503
R8503
4
4
C8527
R8523
R8521 1
R8507 C8501
1
R8525
5
R8515
8
R8519
C8523
C8519
R8529
R8511
R8527 C8525
R8408
4
R8514
C8513
1
5
R8516
8
4
1
R8517
C8514
L5601
R5607
15.SYSCS2
SYSCS1
XDVDRST
DVDPOW
GNDD
20.GNDD
DOUT
GNDD
GNDD
GNDM
25.GNDM
VPR+8M
VPR+8M
VPR+8
VPR+8
30.VDVD+12
C5508
11
D8005
Q8010
R8063
R8403
R8406
R8426
R8427
R8428
C8656
R8656
R8518
C8516
5
R8512
8
4
1 1
30
30
1
80
QQ 3763 1515 0 89 2498 299
8
R8530
C3932
D3902
30
30
6
10
R8520
C8660
R8654
C8654
R8652
C8659
1
R5505
R5504
R5502
R5501
C3904
C3942
CN5502
5
R3909
1
C3909
R3955
R3956
R3902
QQ
376315150 892498299
.
C3935
C3903
TEL
13942296513
5
XV-DV99
IC8503
Q8010
IC8651 Q8009 Q8014 IC8504
IC8652 Q8012 Q8011 Q8404 Q8405
Q8406
Q8407 Q8402 Q8403 Q8401
www
CN901
CN5604
B
Q3910
IC3901
(ANP7481-B)
8
C3905
IC3901
C3902
C3930
Q3910
HP ASSY
AWU8102
HP ASSY
TEL 13942296513
7
D8003
A
B
CN8501
CN5602
CN5201
CN5603
QQ 376315150 892498299
K CN5101
To
SUB WOOFER
A
SIDE A
6
http://www.xiaoyu163.com
5
7
8
4
R5508
CN5501
1.WEN/DI
WD0
WCLK
RST
5.VCC
VSS
NC
R5512
R5510
C5516
R5594 C5503
C5501 C5502
R5586
R5595
R5509
R5597
C5506
R5598
C5515
R5503
NC
HPDET
XHPMUTE
GNDD
VE+56
HPCE
HPCLK
C5513
CN5502
C5514
R5567
C8408
R8419
C5580
R8411
R8413
R8417
C5518
C5517
C5504
R8424
R8423
R8415
R8416
R8420
C5511
R8531
R8532
R8412
R8414
R8418
C8506
R5513
R5511
C8508
R5527
R5514
R5596
C5509
D8508
D8506
C8512
C8507
1
13
C5602
C5601
1.HPL
GNDHP
HPR
VA-12
5.VA+12
HPDATA
HPCLK
HPCE
VE+56
10.GNDD
XHPMUTE
HPDET
13.NC
Q3911
C1008
C1009
D8502
D8504
R5587
C5571 R5588
C5579
C5201
CN8501
1.SWN
FLN
FLP
FRP
5.SWP
FRN
CP
SRN
SRP
10.SLN
CN
SLP
R8061
R8062
D5608
D5609
CN5602
D5606
1.GNDA
VPR+8
D5605
VPR+8
VPR+12
5.GNDM
VPR+8
R5601
GND
R5602
UNE+56
R5606
GND
10.VA-12
R5605
VOLDATA
R5604
VOLCLK
R5603
GNDM
GNDM
15.VOLCS
GNDM
XSYMUTE
SUBAC
XPROTECT
D5607
20.SYSPOW
D5610
CN5201
1.VPR+12LED
GNDLED
IR
XDIMMER
5.GNDD
LCDDAT
XLCDCS
LCDCLK
VE+56
10.GNDD
1.TXD
RXD
RTS
DVD CTS
5.VD+5
GNDD
NC
CN5603
C5573
D5575
Q5571
Q5501
D5572
R5203
5.KEY
GNDU
VE+5
GNDLED
1.TIMERLED
1
7
C5505
CE3
C8505
C8509
D8503
D8501
R5592
Q5572
R8032
R8031
4
1
C5202
Q8008
033 R8034
07
C5574
5
8 7 6
10
20
8
9
C8511
D8505
D8507
R5589
R5590
11
C5577
9
7
L5207
12
R5591
R5593
5
1
3 2
6
3
10
http://www.xiaoyu163.com
R8036
C8072
R8038
L8012
XV-DV99
HP AS
HP ASSY
AWU8102
CE3
Q3911
Q8008
Q80
376315150 892498299
2
QQ 3763 1515 0 89 2498 299
QQ
Q5501
R3961
R3962
x iao y u163. co m
CN5604
R3953
R3952
58
R3963
R3958
R3957
Q5571
D3901
1
.
I
C3943
H I
CN3902
C3931
www
1
C3944
C3945
F
5
1
376315150 892498299
TEL 13942296513
CN5602
2
C
C8510
C8407
13942296513
QQ
CN5601
QQ 376315150 892498299
CN5201
4 3
CN5603
TEL
13942296513
E
1
TEL
D
7
B
L8501
SIDE B
3
http://www.xiaoyu163.com
C8540
A
2
R8060
L8011
1
4
H CONTROL ASSY
CN8501
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
L8202
R8211
R8002
L8003
R8010
L8009
R8006
L8006
R8012
L8004
R8005
R8007
R8042
R8024
R8044
Q8003
R8028
AWU8148
AWU8107
AWU8158
AWU8153
AWU8150
AWU8108
AWU8149
AWU8109
AWU8105
CONTROL ASSY
AWU8103
AWU8099
C5716
VA+12
HPL HPR
F
R5711
1
5.VX+12
6.GNDD
7.VD+5
1
GNDD
9 8.RDSCLK
IC5701
R5714
VX+10
R5705
D5701
R5704
R5703
CN5701
VE+56
13
NC
HPDET
XHPMUTE
GNDD
VE+56
HPCE
HPCLK
HPDATA
VA+12
VA-12
HP R
GNDHP
HP L
R5707
R5713
R5708
C5710
C5709
R5712
C5708
GNDX
R5706
R5702
9.RDSDAT
10.RDSPOW
11
8 11.TXCE
12.TXODAT
13.TXCLK
14.TXIDAT
15.TXMUTE
16.ST/TUNE
17.GNDF
18.VP+12
19.DVD ON/OFF
D
RDS
D1701
D1702
D1703
D1704
C5713
C5712 Q1702
R1703
E
R1701
GNDHP
VA-12
13
Q3903
1
C5704
C5703
Q3905
C3936
L3905
R1702
D1705
C5714
Q1701
R1704
R5715
VD+5
C3937
R3959
Q3911
Q8007
16
16
1.NC
2.TXL
3.GNDX
4.TXR
C3938
R3967
R3966
Q8008
8.TXMUTE
R3960
Q3906
R3965
Q3902
R3963
R3958
R3957
R3961
R3962
Q3901
D3901
FR1S P
(ANP7481-B)
www
R5701
13.NC
12.RDS
11.VX+10
10.TUNE
9.STEREO
7.TXL
6.GNDX
5.TXR
4.TXIDAT
3.TXCLK
2.TXODAT
1.TXCE
C3939
R3964
C3941
C3934
R3950
C3943
R3951
C3931
R3954
R3953
R3952
Q3904
R3968
R3969
AWU8114
AWU8115
AWU8152
AWU8159
RDSDATA
CN5702
TXTRADE ASSY
Q3901
Q3902
376315150 892498299
IC5702
CE3
C3944
C3945
376315150 892498299
QQ 3763 1515 0 89 2498 299
CN3901
1
CN5605
R8054
R8056
C8055
C8059
R8021
R8022
R8023
Q8008
R8033 R8034
Q8007
R8030
Q8004
R1001
L8010
R8003
R8008
R8043
Q8002 Q8001
QQ
1.DVDON/OFF
VP+12
GNDF
ST/TUNE
R8035
C8069
R8037
R8004
R8029
R8027
R8041
C8007 C8008
C8005 C8006
R8202
R8201 C8202 R8204
C8201
L8203
C8608
5.TXMUTE
TXIDATA
TXCLK
TXODATA
TXCE
10.RDSPOW
RDSDATA
RDSCLK
VD+5
GNDD
15.VX+12
TXR
C8003
C8001
L8201
R8203
R8613
L850
R8061
GNDX
TXL
19.GNDX
C8004
C8002
C8540
CN
SLP
C8011
C8009
G TXTRADE ASSY
C
19
R8060
L8011
C8071
C8070
R8614
C8012
C8010
13942296513
QQ
HP ASSY
AWU8102
TEL
1
13942296513
HP ASSY
Q3911
R8009
R8011 L8007
C8212
C8213
C8611
C8609
C8610
C8066
R8015
L8008
R8013
L8002
C8051
R8032
R8031
R8001
L8001
C8065
R8062
C8064
19
TEL
I
B
(ANP7481-B)
CN8401
TEL 13942296513
A
C8063
C8054
L8005
R8014
SIDE B
(ANP7482-A)
CN1701
x iao y u163. co m
Q3904
Q3905 Q3903
Q3906 Q3905
.
F
Q8001 Q8002
Q8004 Q8003
G H I
XV-DV99
5
6
http://www.xiaoyu163.com
7
59
8
1
3
http://www.xiaoyu163.com
2
4
4.8 LCDCONT and CONNECT ASSYS
QQ 376315150 892498299
SIDE A
SIDE A
FR1S P
1/4
White LED
direction
D5002
LCDCONT
ASSY
D5001
W111
VPR+12
D5003
B
J
J5092
FR1S P
VE+5
W108
AWU8118-
1/4
CONNECT ASSY
GNDD
H
CN5201
CN5101
W101
CN5101
GNDD
W102
1
CN5102
1
CN5102
CN5001
99
99
1
1
GNDD
W105
CN5001
VE+5
W104
W107
VPR+12
W103
GNDLED
IR
W106
GNDD
8
8
D
(ANP7483-A)
X5051
1
PC
LCDCONT
ASSY
x iao y u163. co m
C5051
J K
.
C5052
www
F
AWU8119-
E
(ANP7483-A)
XV-DV99
60
1
2
3
http://www.xiaoyu163.com
4
J K
376315150 892498299
W109
1
1
376315150 892498299
QQ 3763 1515 0 89 2498 299
QQ
QQ
TEL 13942296513
1
W110
GNDLED
ASSY
13942296513
13942296513
C
TEL
TEL
K CONNECT
C5002
A
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
SIDE B
SIDE B
LCDCONT
ASSY
B
D5001
D5002
J
A
D5003
C5018
TEL
D5005
D5006
R5011
13942296513
1.VPR+12
2.GNDLED
3.IR
4.XDIMMER
5.LCDCLK
6.XLCDCS
7.LCDDAT
8.GNDD
9.VE+5
CN5001
GNDLED
VPR+12
1
GNDD
1
CN5102
9
9
9.VPR+12
8.GNDLED
7.IR
6.XDIMMER
5.LCDCLK
Q5001
VE+5
13942296513
C5102
D5102
R5009
D5004
GNDLED
TEL
K
CONNECT
ASSY
B
VPR+12
Q5001
4.XLCDCS
1
L5001
R5013
C5001
C5004
8
9.VE+56
FR1S P
(ANP7483-A)
D5013
C5014
D5011
C5012
D5012
C5013
6.LCD
DAT
5.GNDD
D5007
8.LCD
CLK
7.XLCD
CS
CN5101
10.GNDD
R5008
D5010
R5006
D5009
R5007
D5008
VE+5
4.XDIMMER
3.IR
2.GNDLED
1.VPR+12
R5001
R5105
D5104
LCDCONT ASSY
AWU8119-
GNDD
R5103
D5109
376315150 892498299
R5101
D5107
C
QQ
TEL 13942296513
AWU8118-
D
E
R5053
x iao y u163. co m
2.VE+5
A
1.VOUT
R5052
.
J K
F
R5051
www
3.GNDD
376315150 892498299
QQ 3763 1515 0 89 2498 299
GNDD
D5103
C5101
D5101
CONNECT ASSY
R5104
D5105
IR
D5108
FR1S P
QQ
8.NC
7.LCDDAT
6.LCDCLK
5.XLCDCS
4.VREF
3.GNDD
2.VE+5
1.NC
3.LCDDAT
2.GNDD
1.VE+5
(ANP7483-A)
J K
XV-DV99
5
6
http://www.xiaoyu163.com
7
61
8
1
2
3
http://www.xiaoyu163.com
4
5. PCB PARTS LIST
A
QQ 376315150 892498299
B
• LIST OF WHOLE PCB ASSEMBLIES
NOTES:
Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List.
The mark found on some component parts indicates the importance of the safety factor of the part.
Therefore, when replacing, be sure to use parts of identical designation.
When ordering resistors, first convert resistance values into code form as shown in the following examples.
Ex.1 When there are 2 effective digits (any digit apart from 0), such as 560 ohm and 47k ohm (tolerance is shown by J=5%,
and K=10%).
560 Ω
56 x 10 1
RD1/4PU 5 6 1 J
561
47k Ω
RD1/4PU 4 7 3 J
47 x 10 3
473
0.5 Ω
RN2H R 5 0 K
R50
1Ω
RS1P 1 R 0 K
1R0
Ex.2 When there are 3 effective digits (such as in high precision metal film resistors).
5.62k Ω
562 x 10 1
5621
RN1/4PC 5 6 2 1 F
Mark
Symbol and Description
XV-DV990/
ZYXJ
XV-DV990/
ZVXJ
AXA7126
VWT1208
VWG2346
AWM7813
AXA7126
VWT1208
VWG2346
AWM7813
NSP
1..DVD COMP ASSY
2..VIDEO ASSY
2..DSPTRADE ASSY
2..CONTROL ASSY
2..HP ASSY
AWM7844
AWU8100
AWU8101
AWU8099
AWU8102
AWM7844
AWU8100
AWU8101
AWU8099
AWU8102
AWM7866
AWU8100
AWU8101
AWU8148
AWU8102
AWM7866
AWU8100
AWU8101
AWU8148
AWU8102
1..DSP ASSY
AWX8325
AWX8325
AWX8325
AWX8325
1..FM/AM TUNER MODULE
AXQ7229
AXQ7229
AXQ7229
AXQ7229
1..DISPLAY UNIT
2..DISPLAY ASSY
3..LCDCONT ASSY
3..CONNECT ASSY
AXX7163
AWM7853
AWU8119
AWU8118
AXX7163
AWM7853
AWU8119
AWU8118
AXX7163
AWM7853
AWU8119
AWU8118
AXX7163
AWM7853
AWU8119
AWU8118
1..DVD SUB ASSY
2..TXTRADE ASSY
2..KEY R TOP ASSY
2..KEY R ASSY
2..KEY L ASSY
2..KEY L TOP ASSY
AWM7850
AWU8114
AWU8113
AWU8112
AWU8110
AWU8111
AWM7850
AWU8114
AWU8113
AWU8112
AWU8110
AWU8111
AWM7850
AWU8114
AWU8113
AWU8112
AWU8110
AWU8111
AWM7850
AWU8114
AWU8113
AWU8112
AWU8110
AWU8111
QQ
376315150 892498299
NSP
TEL 13942296513
NSP
D
QQ 3763 1515 0 89 2498 299
H CONTROL ASSY
AWU8099 and AWU8148 are constructed the same except for the following :
Mark
Symbol and Description
R5510
R5511
Mark No.
AWU8099
AWU8148
Not used
RS1/16S333J
RS1/16S473J RS1/16S123J
Description
Mark No.
Part No.
SEMICONDUCTORS
SWITCHES AND RELAYS
S101
VSK1011
www
Part No.
B DVDM ASSY
A LOAB ASSY
OTHERS
CN602 KR CONNECTOR
CN601 KR CONNECTOR
PC BOARD LOAB
F
Description
.
IC741, IC761, IC781
IC861, IC871
IC851
IC602
IC802
BA4558F-HT
DSD1702EG
DSD1791DBR
K4S281632D-TC75
K4S641632F-TC75
IC101
M63018FP
MM1565AF
MM1623AF
PQ018EH01ZP
PQ018EZ01ZP
x iao y u163. co m
S2B-PH-K
S5B-PH-K
VNP1836
> IC431
IC501
> IC421
> IC411
XV-DV99
62
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
AXA7126
VWT1208
VWG2346
AWM7813
QQ
AXA7126
VWT1208
VWG2346
AWM7813
13942296513
13942296513
1..DVD ASSY
2..Loading Mech. ASSY
3..LOAB ASSY
2..DVDM ASSY
TEL
TEL
XV-DV99/
ZVXJ
NSP
NSP
NSP
C
E
XV-DV99/
ZYXJ
6
http://www.xiaoyu163.com
5
Mark No.
Description
Part No.
7
Mark No.
8
Description
Part No.
QQ 376315150 892498299
> IC441
> IC401
IC801
IC601
IC301
PQ20WZ11
R1224N102H
SAA7893HL/C2
STI5588CVB
STM6316ATXXA
IC911
IC901
IC807
IC691
IC803
TC74VHC08FT
TC74VHCT125AFT
TC7SET08FU
TC7SU04FU
TC7WH34FU
Q951
Q722, Q746, Q763, Q977
Q922, Q925
Q201, Q211
Q911
DTC114TUA
DTC114YUA
DTC124EUA
HN1A01F
RN1903
Q603
D431, D432
D402, D403, D743, D761, D782
D922-D927
D401
RN4982
1SR154-400
1SS355
1SS355
RB051L-40
D603
D921
D741, D742, D781
RB501V-40
UDZS4.7B
UDZS6.2B
TEL 13942296513
COILS AND FILTERS
L401 POWER INDUCTOR
L402 POWER INDUCTOR
L413, L414 CHIP BEADS
L390
L1056-L1061 CHIP BEADS
ATH7011
CTH1254
ATL7010
LCYA2R7J2520
VTL1078
CAPACITORS
C408, C747, C748, C751, C752
C390
C142
C765, C766, C785, C786
C200, C763, C764, C783, C784
CCSRCH121J50
CCSRCH180J50
CCSRCH221J50
CCSRCH270J50
CCSRCH331J50
C690
C755, C756, C773, C774
C793, C794
C392
C393, C640, C644
CCSRCH470J50
CCSRCH471J50
CCSRCH471J50
CCSRCH560J50
CCSRCH7R0D50
C452, C753, C754, C771, C772
C791, C792
C101, C401, C404, C410, C412
C422, C443, C561, C564, C600
C750, C797-C799, C809, C851
CEVW100M16
CEVW100M16
CEVW101M16
CEVW101M16
CEVW101M16
.
CEVW101M16
CEVW101M16
CEVW101M4
CEVW101M4
CEVW470M16
www
C309, C315, C318, C323, C326
C335, C342, C348, C357, C362
C373, C377, C388, C391
C413, C414, C423, C424
C441, C442, C451, C511, C531
CKSRYB104K16
CKSRYB104K16
CKSRYB104K16
CKSRYB104K16
CKSRYB104K16
C551, C565, C571, C604, C607
C614, C619, C622, C623
C626-C632, C636, C637, C641
C647-C649, C659, C664, C671
C681, C684, C691, C694, C698
CKSRYB104K16
CKSRYB104K16
CKSRYB104K16
CKSRYB104K16
CKSRYB104K16
C741, C742, C749, C767-C769
C787-C789, C801, C803, C804
C806-C808, C811, C813-C826
C829, C852, C855, C856
C858, C859, C862, C865, C866
CKSRYB104K16
CKSRYB104K16
CKSRYB104K16
CKSRYB104K16
CKSRYB104K16
C872, C875, C876, C902, C912
C921
C230, C232, C233, C501, C521
C541, C603, C620, C625
C757, C758, C795
CKSRYB104K16
CKSRYB104K16
CKSRYB105K10
CKSRYB105K10
CKSRYB105K10
C394, C743-C746
C126, C346
C202, C205, C212, C215
C402, C403, C405, C409 (10µF/16V)
CKSRYB152K50
CKSRYB223K50
CKSRYB472K50
DCH1165
QQ 3763 1515 0 89 2498 299
RESISTORS
R824, R825, R836-R838
R201
R211
R100, R1011-R1013, R1069, R111
R210, R387-R389, R412, R415
RAB4C0R0J
RAB4C220J
RAB4C390J
RS1/10S0R0J
RS1/10S0R0J
R417, R421, R422, R483, R485
R561, R600, R623, R840, R884
R403
R105, R106, R115-R120
R104, R107
RS1/10S0R0J
RS1/10S0R0J
RS1/10S100J
RS1/10S4R7J
RS1/10S6R8J
R125, R144, R330, R331, R628
R635, R761-R764, R781-R784
R301
R502, R512, R522, R532, R542
R552
RS1/16S1002F
RS1/16S1002F
RS1/16S1202F
RS1/16S1500F
RS1/16S1500F
R408
R410
R443
R741-R746, R751, R752
R409
RS1/16S1502F
RS1/16S1802F
RS1/16S2001F
RS1/16S2201F
RS1/16S2702F
R441
R101, R102, R123, R142, R143
R442
R411
RS1/16S4701F
RS1/16S5600F
RS1/16S6801F
RS1/8S0R0J
XV-DV99
5
6
C
D
E
x iao y u163. co m
C853, C854, C861, C863, C864
C871, C873, C874
C415, C425, C621, C660, C812
C857
C201, C211
B
376315150 892498299
376315150 892498299
2SC4081
2SD2114K
2SD2114K
CPH6314
DTA124EUA
CKSRYB102K50
CKSRYB102K50
CKSRYB103K50
CKSRYB103K50
CKSRYB104K16
QQ
QQ
Q202, Q212, Q452
Q741, Q742, Q761, Q762
Q781, Q782
> Q401
921
C127, C128, C381, C562, C563
C624, C802, C810
C112-C114, C124, C125, C130
C133, C134, C355, C805
C102, C132, C139, C300, C307
A
13942296513
13942296513
TC7WU04FU
VYW2087
2SA1576A
2SA1576A
2SA1576A
CEVW470M6R3
CEVW470M6R3
CKSQYB104K25
CKSQYB105K16
CKSQYB225K10
TEL
TEL
IC604, IC804
IC603
Q390
> Q451
Q744, Q764, Q923, Q924, Q926
C761, C762, C781, C782, C867
C877
C406
C431
C433
http://www.xiaoyu163.com
7
F
63
8
1
Mark No.
2
Description
3
http://www.xiaoyu163.com
Part No.
Mark No.
RS1/16S###J
OTHERS
OTHERS
CN104 4P CONNECTOR
CN105 12P FFC CONNECTOR
CN103 CONNECTOR
FLEXIBLE CABLE
CN901, CN943 30P FFC CONNECTOR
AKN7035
RKN1053
S5B-PH-SM3
VDA1681
VKN1322
CN8802 4P MINI DIN SOCKET
CN8906, CN8907 23P PLUG
JA8251 OPT LINK IN
PCB BINDER
JA8801 1P PIN JACK
CN101 0.5-24P CONNECTOR
X601 (27MHz)
X301 (20MHz)
VKN1482
VSS1172
VSS1186
JA8871 RGB CONNECTOR
VKB1157
CN8302, CN8908 30P FFC CONNECTOR VKN1322
CN8301 30P FFC CONNECTOR
VKN1434
C VIDEO ASSY
B
SEMICONDUCTORS
AK4114VQ
AK4628VQ
DSPD56367PV150
NJM2391DL1-33
NJU7223DL1-18
IC8862
Q8832, Q8842, Q8901, Q8902
Q8831, Q8841
Q8301, Q8302, Q8331, Q8332
Q8351, Q8352, Q8871, Q8872
MM1507XN
2SA1576A
2SC4081
2SD2114K
2SD2114K
IC8701
IC8702
IC8502
Q8504
Q8503
TC74LVX244FT
TC74VHCT244AFT
TC7WU04FU
UMD2N
UN5112
Q5601, Q8321, Q8382, Q8383, Q8873
Q5602, Q5603, Q8381, Q8903
D1004
D5601-D5604, D8382, D8383, D8841
D8861-D8864, D8871, D8901, D8902
UN5112
UN5212
1SR154-400
1SS355
1SS355
D8501
D8401
D8402, D8502, D8503
1SS355
DAN202K
DAP202K
COILS AND FILTERS
COILS AND FILTERS
L8252 CHIP BEADS
CAPACITORS
VTL1076
CAPACITORS
E
C8877, C8878
C8875, C8876
C8871, C8872
C8803-C8805, C8889-C8892
C8307, C8308
CCSRCH101J50
CCSRCH221J50
CCSRCH391J50
CCSRCH470J50
CCSRCH680J50
C8303, C8304
C8337, C8338, C8357
C8313-C8316, C8341-C8344
C8361-C8364, C8862
C8252, C8881-C8883
CCSRCH681J50
CCSRCH821J50
CEAT100M50
CEAT100M50
CEAT101M16
C8801, C8802, C8884
C8863, C8868
C8383-C8388, C8391, C8392
C8901-C8906
C1004, C1006, C8309, C8310
CEAT102M6R3
CEAT470M16
CEJQ100M16
CEJQ100M16
CEJQ470M16
C8311, C8312, C8339, C8340
C8359, C8360, C8381, C8382
C1003, C1005, C8251, C8253, C8831
C8842, C8843, C8861, C8864-C8867
C8331-C8334, C8351, C8353
CKSRYB103K50
CKSRYB103K50
CKSRYB104K25
CKSRYB104K25
CKSRYB152K50
C8354
C8358
CKSRYB224K10
CKSRYB562K50
www
RESISTORS
.
R8834
R8801-R8803, R8885-R8888
Other Resistors
ATL7002
QTL1013
QTL1013
C8209, C8210
C8421
C8007, C8008, C8201, C8212, C8214
C8404, C8409-C8414, C8416, C8417
C8419, C8505, C8507, C8509
CCSRCH100D50
CCSRCH101J50
CCSRCH471J50
CCSRCH471J50
CCSRCH471J50
C8511, C8512, C8515, C8518, C8520
C8522, C8524, C8526, C8528, C8530
C8532, C8534, C8536, C8539, C8541
C8543, C8545, C8551, C8703, C8706
C8548, C8549
CCSRCH471J50
CCSRCH471J50
CCSRCH471J50
CCSRCH471J50
CCSRCH8R0D50
C8701, C8704
C8406, C8415, C8546, C8547, C8902
C8904
C8217, C8225, C8408
C8204, C8555
CEV100M16
CEV101M16
CEV101M16
CEV470M6R3
CKSRYB102K50
C8009, C8405, C8418, C8517, C8554
C8003, C8005, C8010, C8202, C8207
C8213, C8215, C8407, C8420, C8422
C8504, C8513, C8521, C8523, C8525
C8527, C8529, C8531, C8533, C8535
CKSRYB103K50
CKSRYB104K16
CKSRYB104K16
CKSRYB104K16
CKSRYB104K16
x iao y u163. co m
C8537, C8538, C8540, C8542, C8544
C8550, C8702, C8705, C8901, C8903
C8516
C8514
C8203
CKSRYB104K16
CKSRYB104K16
CKSRYB105K6R3
CKSRYB333K16
CKSRYB473K50
RESISTORS
RS1/16S68R0F
RS1/16S75R0F
RS1/16S###J
R8506
R8201
RAB4C101J
RS1/16S1802F
XV-DV99
64
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
L8002, L8004, L8501, L8502
L8201, L8203, L8204, L8401, L8402
L8504, L8701, L8702
UDZS6.8B
QQ
QQ
IC8201
IC8401
IC8501
IC8901
IC8902
13942296513
13942296513
AEK7065
BA05FP
BA4558F-HT
BU4053BCF
MM1505XN
TEL
TEL
IC5601
IC1002, IC1003
IC8301-IC8303
IC8381, IC8382
IC8861
D8391, D8392
D
AKP7045
AKP7064
GP1FA512RZB
VEF1040
VKB1122
D DSP ASSY
SEMICONDUCTORS
C
F
Part No.
QQ 376315150 892498299
Other Resistors
A
Description
4
6
http://www.xiaoyu163.com
5
Mark No.
Description
7
8
Part No.
Mark No.
RS1/16S###J
C603
C215
Description
CKSRYB392K50
CKSRYB471K50
Part No.
C202,C222
C606
CKSRYB473K16
CKSRYB561K50
QQ 376315150 892498299
Other Resistors
OTHERS
X8501 (27MHz)
X8201 (24.576MHz)
CN8003 13P SOCKET
CN8007, CN8011 19P SOCKET
KN8102 WRAPPING TERMINAL
VSS1171
XSS3003
AKP7070
AKP7073
VNF1084
RESISTORS
R211
R221
R233
R103,R104
Other Resistors
E DSPTRADE ASSY
CAPACITORS
C8907
A
RD1/4PU221J
RD1/4PU222J
RD1/4PU391J
RS1/10S221J
RS1/16S###J
CKSRYB104K16
OTHERS
OTHERS
X201
FM/AM TUNER MODULE
CRYSTAL RESONATOR
(7.2MHz)
B
ASS1093
13942296513
13942296513
F
CN201 13P FFC CONNECTOR
52044-1345
BN201
AKA7002
2P ANTENNA TERMINAL WITH PAL
SHIELD CASE T
ANK7072
SHIELD CASE B
ANK7073
AKP7059
AKP7062
AKP7178
TEL
TEL
CN8901 13P PLUG
CN8902, CN8903 19P PLUG
CN8904, CN8905 23P SOCKET
SEMICONDUCTORS
BA1451F
LC72131MD
2SC2412K
DTA124ES
DTC124EK
D201
D202
D101
1SS133
MTZJ5.1C
UDZS6.8B
BA10FP
BU1924F
1SS355
C5709, C5710
C5712
C5713
C5701, C5702, C5706, C5711
C5705, C5707
CCSRCH270J50
CCSRCH271J50
CCSRCH561J50
CEAT100M50
CEAT470M16
ATE7003
ATF-107
ATF-119
ATF1155
ATF7025
C5708
C5703, C5704, C5716
CKSRYB103K50
CKSRYB104K16
376315150 892498299
376315150 892498299
L601
IC5702
IC5701
D5701
QQ 3763 1515 0 89 2498 299
TEL 13942296513
FM DETECTOR COIL
FM CERAMIC FILTER
FM CERAMIC FILTER
AM CERAMIC FILTER
ANTIBIRDY FILTER
SEMICONDUCTORS
CAPACITORS
COILS AND FILTERS
L201
F202
F201
F203
F601
G TXTRADE ASSY
LCTA270J2520
RESISTORS
CAPACITORS
Other Resistors
C605
C212,C213,C226,C233-C235
C240,C614
C206
C231,C232
CCSQCH680J50
CCSRCH101J50
CCSRCH101J50
CCSRCH120J50
CCSRCH150J50
C223
C229
C224
C227
C241
CEAT100M50
CEAT101M10
CEAT1R0M50
CEAT220M25
CEAT2R2M50
C243
C228
C237
C211
C210
www
CEAT330M16
CEAT3R3M50
CEAT470M10
CEJA1R0M50
CEJA470M16
CKSRYB102K50
CKSRYB103K50
CKSRYB103K50
CKSRYB153K50
CKSRYB182K50
C201,C205,C214,C230,C236
C244
C221
CKSRYB223K50
CKSRYB223K50
CKSRYB224K10
.
ASS7004
52045-1345
52045-1945
VNF1084
SEMICONDUCTORS
E
IC1001
BA12FP
IC8003, IC8401, IC8501-IC8506, IC8652 BA4558F-HT
IC8001, IC8002
BU4051BCF
IC8651
BU4052BCF
IC8402
BU4066BCF
IC1004
IC5501
Q5201, Q5202, Q5501, Q5572
Q8001-Q8004, Q8401, Q8402
Q8007, Q8008
NJM7805DL1A
PDC110B
2SC4081
2SC4081
2SD2114K
Q8005, Q8006, Q8010-Q8012
Q8403, Q8404, Q8406
Q8009, Q8014, Q8405, Q8407
Q5571
UN5112
UN5112
UN5212
UN521L
F
XV-DV99
5
6
D
H CONTROL ASSY
x iao y u163. co m
C103,C104,C204,C238
C102,C208,C216,C217,C220
C239,C242,C604,C615
C225
C607,C608
RS1/16S###J
OTHERS
X5701 (4.332MHz)
CN5702 13P FFC CONECTOR
CN5701 19P FFCCONNECTOR
KN5701 WRAPPING TERMINAL
C
QQ
QQ
IC201
IC202
Q201,Q204,Q205,Q601
Q202
Q203
http://www.xiaoyu163.com
7
65
8
1
Mark No.
A
2
Description
3
http://www.xiaoyu163.com
Part No.
Mark No.
Description
4
Part No.
QQ 376315150 892498299
D1001
1SR154-400
Q3903-Q3906
2SD2114K
D1006, D5575, D8003-D8006, D8009
D8001, D8002
D5201-D5203, D5205, D5206
D5605-D5610
1SS355
UDZS6.8B
UDZS8.2B
UDZS8.2B
D3901
D3902
1SS355
UDZS11B
CAPACITORS
COILS AND FILTERS
L5571 INDUCTOR
L5601 CHIP BEADS
LFEA220J
VTL1075
C3909, C3910
C3907, C3908
C3901-C3904, C3930, C3932, C3935
C3905, C3906, C3933, C3940, C3942
C3911, C3912
CCSRCH101J50
CCSRCH470J50
CEAT100M50
CEAT470M16
CEJQNP101M16
C3913, C3914
C3931
C3936, C3939
C3915, C3916
CKSRYB102K50
CKSRYB103K50
CKSRYB104K16
CKSRYB223K25
CAPACITORS
B
CEAT1R0M50
CEAT222M10
CEAT470M16
CKSRYB102K50
CKSRYB103K50
C5571, C5573, C5580, C8055, C8057
C8059, C8061, C8403, C8404
C8407, C8408, C8505-C8512
C8517-C8524, C8529-C8536, C8540
C8659, C8660
CKSRYB103K50
CKSRYB103K50
CKSRYB103K50
CKSRYB103K50
CKSRYB103K50
C1001, C5513-C5516, C5574
C8063-C8065, C8070, C8661, C8662
CKSRYB104K16
CKSRYB104K16
TEL
13942296513
OTHERS
CN3901 13P FFC CONNECTOR
3901 MINI JACK
KN3901 WRAPPING TERMINAL
SEMICONDUCTORS
QQ
Q5001
D5004-D5006
D5007, D5011-D5013
CAPACITORS
C5012-C5014
C5002, C5051
C5052
C5018
C5001, C5004
RS1/16S1002F
RS1/16S1002F
RS1/16S1002F
RS1/16S###J
CCSRCH220J50
CEAL470M16
CFTLA104J50
CKSRYB103K50
CKSRYB104K16
RESISTORS
Other Resistors
RS1/16S###J
OTHERS
OTHERS
E
2SC4081
1SS355
UDZS6.2B
QQ 3763 1515 0 89 2498 299
RESISTORS
R8501, R8502, R8505, R8506
R8511, R8512, R8515, R8516
R8521, R8522, R8525, R8526
Other Resistors
52044-1345
AKN7026
VNF1084
J LCDCONT ASSY
TEL 13942296513
D
RS1/10S101J
RS1/16S###J
X5501 (10MHz)
CN5601 5P FFC CONNECTOR
CN5501 7P FFC CONNECTORS
CN3902 13P FFC CONNECTOR
CN5605 19P FFC CONNECTOR
ASS7034
52045-0545
52045-0745
52045-1345
52045-1945
8001 6P PIN JACK
CN5602 20P SOCKET
CN8501 12P CONNECTOR
CN5201 10P CONNECTOR
JA8002 2P PIN JACK
AKB7012
AKP7129
AKP7131
AKP7134
RKB1041
CN5603 7P FFC CONNECTOR
CN5502, CN5604, CN8401
30P FFC CONNECTOR
KN1001 WRAPPING TERMINAL
VKN1267
VKN1434
CN5001 9P SOCKET
5051 REMOTE RECEIVER UNIT
AKP7068
GP1UM27XK
K CONNECT ASSY
SEMICONDUCTORS
D5103
D5101, D5102
D5104, D5105, D5107-D5109
1SS355
HZU2.0B
UDZS8.2B
RESISTORS
www
I HP ASSY
F
SEMICONDUCTORS
IC3901
IC3902
Q3911
Q3910
.
Other Resistors
RS1/16S###J
OTHERS
L
x iao y u163
. co m
VNF1084
CN5102 9P PLUG
CN5101 10P CONNECTOR
AKP7057
AKP7134
KEY R TOP ASSY
SWITCHES AND RELAYS
LC75344M
NJM4560M
2SA1576A
2SC4081
S1902, S1903
ASG7013
XV-DV99
66
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
C5578
C5605
C1002, C8056, C8058, C8060, C8062
C5504
C1008, C1009, C5506, C5517, C5518
R3915-R3932
Other Resistors
QQ
CEAT100M50
CEAT100M50
CEAT100M50
CEAT101M16
CEAT102M10
13942296513
C8025, C8026, C8031-C8034
C8401, C8402, C8537, C8538
C8651, C8652, C8657, C8658
C5507, C5508, C5572, C8539, C8541
C5606
TEL
ACH1246
CCSRCH101J50
CCSRCH101J50
CCSRCH221J50
CEAT100M50
RESISTORS
C
376315150 892498299
C5575 (0.047F/5.5V)
C5203, C5204, C5505, C5510, C5511
C5577, C8069, C8072
C8001-C8012
C1007, C1010, C5576, C8021, C8022
6
http://www.xiaoyu163.com
5
Mark No.
Description
7
8
Part No.
QQ 376315150 892498299
RESISTORS
Other Resistors
A
RS1/16S###J
OTHERS
1903
7P CABLE HOLDER
CN1902 5P FFC CONNECTOR
J1901 JUMPER WIRE
51048-0700
52044-0545
D20PYY0710E
M KEY R ASSY
SWITCHES AND RELAYS
S1901
ASG7013
B
RESISTORS
Other Resistors
RS1/16S###J
TEL
TEL
OTHERS
51048-0600
51048-0700
D20PYY0625E
13942296513
13942296513
1905 6P CABLE HOLDER
1904 7P CABLE HOLDER
J1902 PARALELL WIRE
N KEY L ASSY
SEMICONDUCTORS
Q1904
D1901
2SC4081
SLR-343PC(LM)
SWITCHES AND RELAYS
ASG7013
RESISTORS
Other Resistors
RS1/16S###J
QQ 3763 1515 0 89 2498 299
376315150 892498299
376315150 892498299
TEL 13942296513
QQ
QQ
S1904
OTHERS
1907 3P CABLE HOLDER
1906 6P CABLE HOLDER
J1903 JUMPER WIRE
51048-0300
51048-0600
D20PYY0310E
O KEY L TOP ASSY
SWITCHES AND RELAYS
S1905, S1906
ASG7013
RESISTORS
Other Resistors
C
RS1/16S###J
D
OTHERS
1908 3P CABLE HOLDER
51048-0300
E
www
.
x iao y u163. co m
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
67
8
1
3
http://www.xiaoyu163.com
2
4
6. ADJUSTMENT
QQ 376315150 892498299
6.1 TUNER SECTION
A
AM Tuner Section
• There is no adjustment in the AM tuner.
FM Tuner Section
• Set the mode selector to FM BAND.
• Connect the wiring as shown in Fig. 1.
B
[ANT. INPUT SIGNAL]
• Frequency : 98 MHz
• Modulation : OFF
• Input Level : 80 dBµV
T-METER
Adjustment
L201
Adjustment
value
IC201
Pin 21/Pin23
MPX SG
0 ± 50mV
Adjustment State
Adjust L201 so that the DC voltage between Pin 21 and Pin 23
of IC201 (Test point "Vtm") gets within 0 ± 50mV.
PRODUCT
FM SG
DC
Voltmeter
C
FM75Ω antenna terminal
376315150 892498299
F
FM/AM TUNER MODULE
D
L201
IC201
pin 21 pin 23
E
SIDE B
www
F
x iao y u163. co m
Fig.2 Adjustment Point
.
XV-DV99
68
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
QQ
QQ
Fig.1 Adjustment Wiring Diagram
13942296513
13942296513
1
Adjustment Measurement
point
point
Adjustment
Title
TEL
TEL
Step
No.
6
http://www.xiaoyu163.com
5
7
8
6.2 ADJUSTMENT ITEMS AND LOCATION
QQ 376315150 892498299
Adjustment Items
Adjustment Points (Mechanism Part)
[Mechanism Part]
A
Cautions: After adjustment, adjustment screw locks with the
Screw tight.
1 Tangential and Radial Height Coarse Adjustment
2 DVD Jitter Adjustment
1 2
Radial
adjustment
screw
1 2
Tangential
adjustment
screw
[Electrical Part]
Electrical adjustments are not required.
B
TEL
TEL
13942296513
13942296513
QQ
QQ
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
6.3 JIGS AND MEASURING INSTRUMENTS
Screwdriver (large)
Screwdriver (medium)
C
D
Test mode remote control
unit (GGF1381)
TV monitor
E
Screw tight
(GYL1001)
www
x iao y u163. co m
Precise screwdriver
.
DVD test disc
(GGV1025)
Soldering iron
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
69
8
1
2
3
http://www.xiaoyu163.com
4
6.4 NECESSARY ADJUSTMENT POINTS
A
QQ 376315150 892498299
When
Adjustment Points
Exchange Parts of Mechanism Assy
Mechanical ~, Ÿ
point
Exchange the Pickup
∗ After adjustment, screw locks
with the Screw tight.
Electric
point
Mechanical
point
Exchange the Traverse Mechanism
B
TEL
TEL
Electric
point
Electric
point
C
Exchange PCB Assy
Electric
point
D
E
www
F
.
x iao y u163. co m
XV-DV99
70
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
LOAB and DVDM ASSY
QQ 3763 1515 0 89 2498 299
Mechanical
point
QQ
QQ
TEL 13942296513
Exchange PC Board
13942296513
13942296513
∗ After adjustment, screw locks
with the Screw tight.
Mechanical Ÿ
point
Exchange the Spindle Motor
6
http://www.xiaoyu163.com
5
7
8
6.5 TEST MODE
QQ 376315150 892498299
A
• The TEST MODE functions that are used only during adjustment are described here. For details, see "7.1.1 TEST MODE".
TEST MODE: ON
ESC
TEST
POWER
GGF1381
Test mode
remote control
unit
ON
B
TEL
TEL
TEST MODE: DISC SET
CHECK
DVD, CD
<TRAY OPEN>
13942296513
13942296513
DVD disc
OPEN/CLOSE
OPEN/CLOSE
(Player)
(Player)
DSC - &&&
QQ
QQ
TEST MODE: PLAY
<PLAY>
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
TV/LDP
An address is displayed
CAUTION:
Perform only trace, video and audio outputs
are nothing.
< When playback with the target address of disc (DVD)>
For example, when playback with # 30000
During PLAY
+10
3
0
0
0
0
C
CHP/TIM Press keys in order
030000
D
E
TEST MODE: OFF
ESC
www
POWER
x iao y u163. co m
OR
.
OFF
GGF1381
Test mode
remote control
unit
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
71
8
1
2
3
http://www.xiaoyu163.com
4
6.6 MECHANISM ADJUSTMENT
A
QQ 376315150 892498299
1 Tangential and Radial Height Coarse Adjustment
START
• Remove the Loading Mecha. Assy.
• Remove a Spacer for height adjustment
attached to the back side (shaded area)
of the Loading Mecha. Assy (Float Base)
with nippers.
Cautions:
Because there is not a Spacer for height adjustment in
adjustment after the second time, will keep it at need.
(This parts is Traverse mechanism exclusive use of a model
for 2003 years)
7.3mm
B
Loading Mecha. Assy
Spacer for Height adjustment
Note:
Before removing the flexible cable for the
pickup, soldering of the pickup circuit is
necessary.
For details, see "7.1.9 DISASSEMBLY".
C
Turn a flat side
into bottom
E
www
F
.
x iao y u163. co m
XV-DV99
72
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
D
QQ
QQ
QQ 3763 1515 0 89 2498 299
TEL 13942296513
13942296513
13942296513
Put a spacer between a Tangential (or Radial) adjustment
screw and Mechanism Base and turn each screw to adjust
the height. (Refer to "6.1 ADJUSTMENT ITEMS AND
LOCATION".)
TEL
TEL
Float Base
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
2 DVD Jitter Adjustment
• Playback method of inner and outer address for the purpose is refererd to "6.5 TEST MODE".
• Jitter indication of the monitor is refererd to "7.1.2 DISPLAY SPECIFICATION OF THE TEST MODE".
A
Use disc: GGV1025
START
Mechanism Assy
• Test mode
• Play the DVD test disc
at outer track
(around #200000)
• Play the DVD test disc
at inner track
(around #30000)
Adjust the Tangential
Adjustment Screw so that
jitter becomes minimum.
J : Min
B
Mechanism Assy
TEL
TEL
Adjust the Radial
Adjustment Screw so that
jitter becomes minimum.
13942296513
13942296513
J : Min
J: ----
QQ
0 OPEN/CLOSE
STANDBY/ON
QQ 3763 1515 0 89 2498 299
• Play the DVD test disc
at outer track
(around #200000)
Monitor
376315150 892498299
Mechanism Assy
Readjust the Tangential
Adjustment Screw so that
jitter becomes minimum.
CHECK
Turn the POWER OFF in
case of NG once, and
perform the adjustment
once again.
NG
Confirm the error rate that is
displayed "OK"
(Example ERROR RATE: 6.6oe - 6 OK )
D
J : Min
K
376315150 892498299
TEL 13942296513
Player
E
O
QQ
TIMER
C
If error rate is OK,
locks a root of
tangential and radial
adjustment screws with
the Screw tight, and
go to step ! .
www
Disc playback normally.
• The measurement of block error rate
ESC
ESC
5
x iao y u163. co m
Screw tight: GYL1001
.
Test mode end
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
73
8
1
2
3
http://www.xiaoyu163.com
4
7. GENERAL INFORMATION
QQ 376315150 892498299
7.1 DIAGNOSIS
A
7.1.1 TEST MODE
Test Mode Functional Specification
1 Test mode entry
In the power ON state, press the [ESC] (A8-5F) key and [TEST / RANDOM] (A8-5E) key in order of the Test mode remote control
unit.
• OSD displays test mode. Refer to the "7.1.2 DISPLAY SPECIFICATION OF THE TEST MODE".
2 Release the Test mode
• Turn off the power.
• Press the [ESC] (A8-5F) key of the remote control unit and reset it.
B
3 Tray open / close
TEL
TEL
• Press the [REPEAT A-B] (A8 - 48) key of the remote control unit.
• Press the [OPEN / CLOSE] key of the main unit from the stop state.
4 Playback stop
13942296513
13942296513
1. Press the [REPEAT] (A8 - 44) key of the remote control unit from the playback state.
2. Press the [STOP] key of the remote control unit or main unit from the playback state.
(Playback stops, but the loaded disc keeps rotating.)
5 LD ON
DVD : Press the [TEST] (A8-5E) and [1] (A8-01) keys in order, and turn on the laser diode (650n).
CD : Press the [TEST] (A8-5E) and [4] (A8-04) keys in order, and turn on the laser diode (780n).
C
6 Focus on / sweep
CAV : Press the [TEST] (A8-5E) and [5] (A8-05) keys in order,then rise up the spindle and FG servo becomes on.
CLV : Press the [TEST] (A8-5E) and [9] (A8-09) keys in order,then rise up the spindle and FG servo becomes on.
8 Tracking open / close
1. Open tracking by pressing the [STEP FWD] (A8-54) key of the remote control unit in the play state.
2. Close tracking by pressing the [STEP REV] (A8-50) key of the remote control unit in the play state.
D
9 Slider servo on/off
1. Turn on the slider servo by pressing the [TEST] (A8-5E) and [CX] (A8-0E) keys in order.
2. Turn off the slider servo by pressing the [TEST] (A8-5E) and [TV/LDP] (A8-0F) keys in order.
0 Slider in / out
Slider in : In the tracking off state, press the [SCAN REV] (A8-11) key of the remote control unit.
Slider out : In the tracking off state, press the [SCAN FWD] (A8-10) key of the remote control unit.
- Play (perform only the ID search and trace to the specified location)
Press the [TV/LDP] (A8-0F) key of the remote control unit from the stop state.
Perform only trace, video and audio outputs are nothing.
E
= Screen display ON/OFF
1. Turn off the display by pressing the [AUDIO] (A8-1E) key of the remote control unit.
2. Turn on the display by pressing the [DISPLAY] (A8-43) key of the remote control unit.
www
F
.
x iao y u163. co m
XV-DV99
74
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
7 Spindle FG servo
QQ
QQ
1. Lock the focus by pressing the [TEST] (A8-5E) and [2] (A8-02) keys in order.
2. Repeat focus sweep by pressing the [TEST] (A8-5E) and [3] (A8-03) keys in order.
6
http://www.xiaoyu163.com
5
7
8
~ Search
QQ 376315150 892498299
1. Search address input entry
• It becomes the address input mode when pressing the [+10] (A8-1F) key. (Most significant digit of an address displays "<".)
• In this time, display the last address as the initial state.
A
2. Search address input
• Press the [0] to [9] (A8-00 to 09) keys of the remote control unit. In the DVD, set an address with hexadecimal.
• In the address input mode, turn to the hexadecimal input by pressing the [PROGRAM] (A8-4C) key (display a "∗" mark), and [1] to
[6] keys are each input as A to F.
• Hexadecimal input and decimal input can switch with toggle.
• In case of CD, perform only the absolute time search.
3. Search execution
• Press the [CHP/TM] (A8-13) key of the remote control unit.
• After the search, perform only trace and video and audio outputs are nothing.
B
TEL
TEL
4. Release the Search address input
• Clear the address by pressing the [CLEAR] (A8-45) key. Release the address input mode when pressing the [CLEAR] key once again.
13942296513
13942296513
QQ
QQ
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
C
D
E
www
.
x iao y u163. co m
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
75
8
1
2
3
http://www.xiaoyu163.com
4
7.1.2 DISPLAY SPECIFICATIONS OF THE TEST MODE
A
QQ 376315150 892498299
2
Character in bold : Item name
: Information display
3
7
8
9
12
14
1
5
6
13
15
B
16
17
18
19
10
11
0 Disc sensing [DSC – ∗ ∗ ∗]
The type of discs loaded is displayed.
[DVD], [CD ], [ ]
2 Code indication of remote control unit [R – ∗ ∗ ∗ ∗]
In case of double code, display a 2nd code.
= Version of the AV-1 chip / version of firmware
[AV: ∗ ∗ / ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗]
! Region setting of the player [REG: ∗]
Setting value : [1] to [6]
@ Destination setting of the System Control Microcomputer
[MDL: ∗ ∗ ∗ ∗ / ∗ ∗ ∗]
Four characters in the front represent the type of model.
Three characters in the back represent the destination code.
J: /J, K: /KU, /KC, /KU/KC, R: /RL/RD, RAM : /RAM,
LB: /LB, WY: /WY
6 Spindle status [SPDL – ∗ ∗ ∗]
[OFF], [ACC/BRK], [CAV], [CLV]
7 Mechanism (loading) position value [M – ∗ ∗]
Unknown
: [01] or [41]
Open state
: [04]
Close state
: [08]
During opening : [12]
During closing : [22]
# Part number of the flash ROM and DVD Control Microcomputer
[∗ ∗ ∗ ∗ ∗ ∗ / ∗ ∗ ∗ ∗ ∗ ∗]
8 Slider position [S – ∗ ∗ ∗ ∗]
In Side Switch ON : [01]
In Side Switch OFF : [00]
$ Version of the flash ROM [V: ∗. ∗ ∗ ∗]
Flash ROM size [FLASH = ∗ ∗]
E
9 Output video system [V – ∗ ∗ ∗ ∗]
NTSC system
: [NTSC]
PAL system
: [PAL]
Automatic setting : [AUTO]
Scart terminal output [SK – ∗ ∗]
(Display only the WY model which can do the output setting
of scart terminal.)
VIDEO : [00]
S-VIDEO : [01]
RGB
: [02]
www
.
% Revision of the DVD Control Microcomputer
[S: ∗. ∗ ∗ ∗ / ∗. ∗ ∗ ∗]
version . revision / build number of the ST core
^ Revision of the DVD mechanism controller
[M: ∗ ∗ / ∗ ∗ ∗]
Kinds of version / firmware of the FE.
RAM or ROM
x iao y u163. co m
XV-DV99
76
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
TEL 13942296513
5 Tracking status [TRKG – ∗ ∗ ∗]
Tracking on : [ON]
Tracking off : [OFF]
QQ
QQ
QQ 3763 1515 0 89 2498 299
~ Version of the FL controller [FL: ∗ ∗ ∗ ∗]
3 Main unit keycode indication [K – ∗ ∗]
F
- Jitter value [J – ∗ ∗ ∗ ∗]
13942296513
13942296513
D
TEL
TEL
C
1 Address indication
The address being traced is displayed in number.
(as for the DVD, indication of decimal number is possible.)
DVD : ID indication (hexadecimal number, 8 digits)
[∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗]
CD : A-TIME (min. sec.) [0 0 0 0 ∗ ∗ ∗ ∗]
6
http://www.xiaoyu163.com
5
7
8
7.1.3 FUNCTIONAL SPECIFICATION OF THE SHORTCUT KEY
QQ 376315150 892498299
Only during normal playback, the following shortcut keys can be assigned by pressing a required key after pressing the ESC
key of the remote control unit. To quit, press the ESC key
Command Contents
Memory clear and resion / revision indication
CLEAR (∗1)
A8-45
Average value measurement of DVD error rate
5 (∗1)
A8-05
CD error rate measurement
5 (∗1)
A8-05
Aspect : Pan scan
2
A6-01
Aspect : Letter box
3
A6-02
Aspect : Wide
4
A6-03
Digital : AC3
5
A6-04
Digital : AC-3 > PCM
6
A6-05
Virtual surround : OFF
7
A6-06
Only for models having the corresponding
functions
Virtual surround : TruSurround
A6-A1 AF-E4
STEP FWD
A6-A1 AF-B7
DTS Digtal output OFF
STEP REV
A6-A1 AF-B8
AUDIO
A6-A1 AF-BE
Scart terminal output : VIDEO
WY, models equipped with Scart terminal
SUBTITLE
A6-A1 AF-36
ANGLE
A6-A1 AF-B5
R_SKIP
A6-92
Scart terminal output : RGB
Progressive OFF
Only for progressive models
Progressive ON
Only for models having the corresponding functions
Audio 5.1 CH ON
A6-91
A6-74
CX (∗1)
A8-0E
STEREO (∗1)
A8-4A
FL indication of EDC / ID error
FL indication of ID number
ZOOM
ZOOM OFF
A6-A1 AF-37
< X3 (∗1)
A8-59
CHP/TIM (∗1)
A8-13
CHAP (∗1)
A8-40
Background color change
+10 (∗1)
A8-1F
Audio last stage mute ON
9
A6-08
Audio last stage mute OFF
0
A6-09
Title search Input mode IN
Title No. input
Search execution
SIDE A (∗1)
Numbers (∗1)
PLAY (∗1)
A8-4D
A8-00 to A8-09
A8-17
Region confimation mode
AUDIO (∗1)
Numbers (∗1)
A8-1E
A8-01 to A8-08
Service mode indication (error rate indication, etc.)
Model information indication
∗1 : Test mode remote control unit
• Service mode indication (ESC + CHP/TIM keys)
ID Address
The error rate is always displayed in exponential notation, e.g., ∗.∗ ∗ e - ∗, for both DVDs and CDs.
EDC/ID/AV 1 error history (ID Address, EDC/ID/AV 1 Error, last eight errors)
Self-diagnosis functions (If a mechanical error has occurred, the mechanical-error history is also displayed.)
• Calculation of the average error rate (ESC + "5" [Test mode remote control unit] keys)
The average of the last eight error rates is calculated and indicated in exponential notation. After the calculation is completed, "OK" or "NG" is
displayed. If "NG" is displayed, the disc tray will open (for both DVDs and CDs)
For DVDs: OK with 5.0e-4 or less, for CDs: OK with 7.6e-3 or less
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
ZOOM ON (X4)
C
QQ
QQ
F_SKIP
KD_ENTER
13942296513
REPEAT B
DTS Digital output ON
B
TEL
Digital output OFF
13942296513
A6-07
A6-A1 AF-E8
TEL
8
REPEAT A
Digital output ON
Scart terminal output : S-VIDEO
A
Remote Control
Remote
Key Name
Control Code
Conditions
D
E
• Indication of model information (ESC + CHAP keys)
The items from 12 to 19 of the TEST MODE Indications are displayed. However, in the indications, S in the standard test mode is changed to
B.E VERSION, and M is changed to F.E VERSION. For details, see 7.1.4.
x iao y u163. co m
• Change of the background colors (ESC + "+10" [Test mode remote control unit] keys)
www
Every time the keys are pressed, the background color is changed between blue and green alternately.
(The green background is used in SETUP NAVIGATOR.)
• Region confirmation mode (ESC + AUDIO [Test mode remote control unit] + "1"-"8" [Test mode remote control unit] keys)
.
After you press the AUDIO key while holding the ESC key pressed and then input the region number, if the number is different from that set in
the unit, an error message is displayed, and the tray opens.
XV-DV99
5
6
http://www.xiaoyu163.com
7
77
8
F
1
2
3
http://www.xiaoyu163.com
4
7.1.4 SPECIFICATION OF MODEL INFORMATION
QQ 376315150 892498299
To display model information : Press the ESC key then the CHAP key.
To close the model information display : Press the ESC key.
A
• Display contents
2
12
11
3
1
B
TEL
TEL
4
5
13942296513
13942296513
6
7
8
9
10
Character in bold : Item name
: Information display
C
D
E
8 CHIP VERSION
Version of ST CHIP
CUT ID / JTAG ID
(two columns) (eight columns)
9 B.E VERSION
Version of BACK END
(version of ST core software)
.
/
softwareVersion . softwareRevision / buildNumber
0 F.E VERSION
Version of FRONT END (version of mechanism controller CHIP software)
/
MainVersion / Kinds of firmware RAM or ROM
- Remote control code
= Key code of Main unit
www
F
.
x iao y u163. co m
XV-DV99
78
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
QQ
QQ
1 Model name
Display it according to model information set from the System Control Microcomputer.
2 Destination indication
Display it according to model information set from the System Control Microcomputer.
3 Region No.
4 Part number
5 ROM version
6 Flash size
7 FL controller version
6
http://www.xiaoyu163.com
5
7
8
7.1.5 FUNCTIONAL SPECIFICATION OF THE SERVICE MODE
QQ 376315150 892498299
• EDC / ID error LCD display (shortcut function)
EDC/ID error is displayed on the LCD display if you press the CX key while holding the ESC key on the TEST MODE remote
control unit pressed. To quit while an EDC/ID error is displayed, press the ESC key.
A
LCD display
00 /00 / 01 ∗
∗: Lights when an AV1 error was generated at least once.
Number of sites where an EDC or ID error was generated
Number of retrials while an ID error is being generated
(only displayed at the moment when an error is being generated),
and for the ST models, the number of retrials made for the latest ID error
Number of retrials while an EDC error is being generated
(only displayed at the moment when an error is being generated),
and the number of retrials made for the latest EDC error
B
TEL
TEL
• Display during Service Mode
13942296513
13942296513
To enter Service Mode, press the CHP/TIM key while holding the ESC key pressed.
To quit, press the ESC key.
Service mode display
1 ID Address
2 Error rate (always displayed), in exponential notation
∗∗
(∗∗∗∗)
Number of error rates
QQ
QQ
02: Indicates use of the same method as for the 02 models,
No indication: Indicates use of the method used for models before the 02 model
3 EDC/ID/AV1 error history (ID Address, EDC/ID/AV1 errors, last eight errors)
Description of AV1 errors
BIT0: In BE code, an EDC error, FEC I/F buffer overflow, or "not valid" is generated (B.E error)
BIT1: In BE code, the ID is different from that of the target (B.E error)
BIT2: An error was generated in FE-added 2-byte EDC data. (F.E error)
4 Self-diagnosis functions
Whether F.E is normal or not is checked.
FE OK: No abnormality in F.E
FE Error: Abnormality is recognized in F.E.
Pressing the CHP/TIM key again displays the mechanical error history. Each press of the CHP/TIM
key changes the displays between the mechanical error history and the Service Mode display.
For details on the mechanical error history, refer to the addendum.
Indication plan contents
3
1
2
4
www
.
AV1
ERR
00
01
02
03
04
05
06
07
2
0
0
0
0
1
1
1
1
BIT
1
0
0
1
1
0
0
1
1
0
0
1
0
1
0
1
0
1
D
E
x iao y u163. co m
Character in bold : Item name
: Information display
F
XV-DV99
5
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
C
6
http://www.xiaoyu163.com
7
79
8
1
2
3
http://www.xiaoyu163.com
4
7.1.6 MECHANICAL ERROR HISTORY
Mechanical Error History
A
QQ 376315150 892498299
Only if a mechanical error (FE error) has been generated, a mechanical error history containing up to the last eight errors is
displayed if you press the "ESC" + "CHP/TIM" key in Normal Mode.
Errors are displayed in descending order, with the latest one at the top.
Description of the mechanical error history
1 Error number
The first two digits are for the error code, and the second
two digits are for the servo state.
Note: When an error has been generated, if the servo state
is "Disc judge," the disc tray opens, and if the servo
state is other than "Disc judge," the unit stops
(excluding a case of a device error with the error
code 0xd∗).
Servo State
Error Code
B
Indication contents
2
3
2
3
1
1
13942296513
13942296513
3 Description of errors
Error messages are displayed.
Example: If the error code is 0x13 (Focus lost timeout)
and the servo state is 0x05 (Disc judge), the
message becomes "Focus lost timeout in Disc
judge."
C
0x0∗
FOCUS TIMEOUT
0x1∗
0x00
Reset
Focus on error
0x01
Focus on timeout
0x11
0x01
Stop (inside position)
Focus off error
0x02
Focus off timeout
0x12
0x02
Stop (any position)
Focus lost error
0x03
Focus lost timeout
0x13
0x03
Braking for stop
Focus balance adjust error
0x04
Focus balance adjust timeout
0x14
0x04
New disc
Focus gain adjust error
0x05
Focus gain adjust timeout
0x15
0x05
Disc judge
Focus sweep error
0x06
Focus sweep timeout
0x16
0x06
Reserved 1
Focus reflection error
0x07
Focus reflection timeout
0x17
0x07
Playing
TEL 13942296513
TRACKING ERROR
Tracking on error
QQ 3763 1515 0 89 2498 299
0x2∗
TRACKING TIMEOUT
0x3∗
0x08
Start up
0x21
Tracking on timeout
0x31
0x09
Seeking
Pausing
Tracking off error
0x22
Tracking off timeout
0x32
0x0A
Tracking lost error
0x23
Tracking lost timeout
0x33
0x0B
Reading BCA
Tracking balance adjust error
0x24
Tracking balance adjust timeout
0x34
0x0C
Reserved 2
Tracking gain adjust error
0x25
Tracking gain adjust timeout
0x35
0x0D
STEPPING ERROR
0x4∗
STEPPING TIMEOUT
0x5∗
0x0E
Tray open
Stepping on error
0x41
Stepping on timeout
0x51
0x0F
Tray moving
Stepping off error
0x42
Stepping off timeout
0x52
Stepping lost error
0x43
Stepping lost timeout
0x53
Stepping move error
0x44
Stepping move timeout
0x54
SPINDLE ERROR
0x6∗
SPINDLE TIMEOUT
0x7∗
Spindle on error
0x61
Spindle on timeout
0x71
Spindle off error
0x62
Spindle off timeout
0x72
Spindle lost error
0x63
Spindle lost timeout
0x73
Spindle CAV error
0x64
Spindle CAV timeout
0x74
Spindle CLV error
0x65
Spindle CLV timeout
0x75
ACQUISITION ERROR
www
0x8∗
PLL lost error
DECODER ERROR
0xa∗
ID lost error
DEVICE ERROR
SRAM error
F
0xa3
.
ACQUISITION TIMEOUT
0x9∗
x iao y u163. co m
0x83
PLL lost timeout
0x93
DECODER TIMEOUT
ID lost timeout
0xb∗
Note : 0 x & &
0xb3
0xd∗
code
(Only this part is displayed to a display)
0xd1
XV-DV99
80
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
E
• List of the servo states
FOCUS ERROR
QQ
QQ
D
• List of the error codes
TEL
TEL
2 Error number
The elapsed time from the time when the system was
turned on until an error was generated is displayed.
Note: If a later error time is shorter than the previous
error time, it means that the unit was turned off
then on again.
6
http://www.xiaoyu163.com
5
7
8
ERROR CODE TABLE
QQ 376315150 892498299
Error Name
No.
Causes
Check Item
Possibility of Trouble
Remarks
FOCUS ERROR (0 x 0∗)
Focus on error
0 x 01 Focus on could not be completed
Are not there a dirt or a scratch in 1. Pickup
the Disc? Does LD become weak? 2. Driver
Does the lens move up and down? 3. Front End IC
Focus off error
0 x 02 Focus off could not be completed
Unknown
Focus lost error
0 x 03 Focus servo is lost
Are not there a dirt or a scratch in
1. Pickup
the Disc? Does LD become weak?
Focus balance adjust error
0 x 04 AFB on could not be completed
Focus gain adjust error
0 x 05 Focus AGC could not be completed
Focus sweep error
0 x 06
Focus reflection error
0 x 07 Dimensions of S curve did not reach to the aim value Does LD become weak?
A
1. Pickup
FOCUS TIMEOUT (0 x 1∗)
Are not there a dirt or a scratch in 1. Pickup
the Disc? Does LD become weak? 2. Driver
Does the lens move up and down? 3. Front End IC
0 x 11 Did timeout at focus on
Focus off timeout
0 x 12
Did timeout at focus off
Focus lost timeout
0 x 13
Did timeout at focus backup
0 x 14
Did timeout at AFB
Focus gain adjust timeout
0 x 15
Did timeout at AGC
Focus sweep timeout
0 x 16
13942296513
13942296513
Focus balance adjust timeout
B
TEL
TEL
Focus on timeout
TRACKING ERROR (0 x 2∗)
1. Pickup
2. Driver
3. Front End IC
0 x 21 Tracking on could not be completed
Tracking off error
0 x 22 Tracking off could not be completed
Tracking lost error
0 x 23 Tracking servo is lost
Tracking balance adjust error
0 x 24 ATB could not be completed
1. Pickup
Tracking gain adjust error
0 x 25 AGC could not be completed
1. Pickup
Tracking jump error
0 x 26 Tracking jump could not be completed
1. Pickup
Tracking on timeout
0 x 31 Did timeout at tracking on
Tracking off timeout
0 x 32 Did timeout at tracking off
Tracking lost timeout
0 x 33 Did timeout at tracking backup
Are not there a dirt or a scratch in
the Disc?
1. Pickup
2. Driver
3. Front End IC
Are not there a dirt or a scratch in
the Disc?
1. Pickup
Tracking balance adjust timeout
0 x 34 Did timeout at ATB
1. Pickup
Tracking gain adjust timeout
0 x 35 Did timeout at AGC
1. Pickup
Tracking jump timeout
0 x 36 Did timeout at tracking jump
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
TRACKING TIMEOUT (0 x 3∗)
STEPPING ERROR (0 x 4∗)
Stepping on error
0 x 41 Stepping on could not be completed
Stepping off error
0 x 42 Stepping off could not be completed
Stepping lost error
0 x 43 Stepping servo is lost
Stepping move error
1. Pickup
2. Driver
3. Front End IC
Do move to inner and outer periphery
1. Stepping motor
of the stepping in the test mode?
2. Inside switch
Do indicate "S-04" at the most inner
3. Driver
periphery of the stepping?
0 x 44 Stepping could not move
Stepping on timeout
0 x 51 Did timeout at stepping on
Stepping off timeout
0 x 52 Did timeout at stepping off
Stepping lost timeout
0 x 53 Did timeout at stepping backup
www
.
1. Pickup
2. Driver
3. Front End IC
Do move to inner and outer periphery
1. Stepping motor
of the stepping in the test mode?
2. Inside switch
Do indicate "S-04" at the most inner
3. Driver
periphery of the stepping?
x iao y u163. co m
0 x 54 Did timeout at stepping movement
F
XV-DV99
5
D
E
STEPPING TIMEOUT (0 x 5∗)
Stepping move timeout
C
QQ
QQ
Tracking on error
6
http://www.xiaoyu163.com
7
81
8
1
4
QQ 376315150 892498299
Error Name
A
3
http://www.xiaoyu163.com
2
No.
Causes
Check Item
Possibility of Trouble
Remarks
SPINDLE ERROR (0 x 6∗)
Spindle on error
0 x 61 Spindle on could not be completed
Spindle off error
0 x 62 Spindle off could not be completed
Spindle lost error
0 x 63 Spindle lost control
Spindle CAV error
0 x 64 CAV on could not be completed
Spindle CLV error
0 x 65 CLV on could not be completed
SPINDLE TIMEOUT (0 x 7∗)
0 x 72 Did timeout at spindle stop
Spindle lost timeout
0 x 73 Did timeout at spindle backup
Are not there a dirt or a scratch in
the Disc?
Is FG output from the driver?
1. Spindle motor
2. Spindle driver
Spindle CAV timeout
0 x 74 Did timeout at CAV on
Is spindle rotating?
Is FG output from the driver?
Is the PDM output from L6315?
1. Spindle motor
2. Spindle driver
3. Front End IC
Spindle CLV timeout
0 x 75 Did timeout at CLV on
0 x 83 PLL is lost
Are not there a dirt or a scratch in
the Disc?
1. Pickup
2. Front End IC
0 x 93 Did timeout at PLL backup
Are not there a dirt or a scratch in
the Disc?
1. Pickup
2. Front End IC
0 x a3 ID is not readable
Are not there a dirt or a scratch in
the Disc?
1. Pickup
2. Front End IC
0xb3
Are not there a dirt or a scratch in
the Disc?
1. Pickup
2. Front End IC
B
TEL
13942296513
C
ACQUISITION ERROR (0 x 8∗)
PLL lost error
ACQUISITION TIMEOUT (0 x 9∗)
PLL lost timeout
DECODER ERROR (0 x a∗)
ID lost error
DECODER TIMEOUT (0 x b∗)
ID lost timeout
Did timeout at ID backup
Power supply of SRAM
Is not bus line short-circuiting?
0 x d1 Cannot access SRAM
0 x e1
1. software runaway
3. Software bug
Unexpected error
D
E
www
F
.
x iao y u163. co m
XV-DV99
82
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
FAILSAFE (0 x e∗)
Unexpected error
1. SRAM
2. Front End IC
3. Front End-SRAM bus line
QQ 3763 1515 0 89 2498 299
TEL 13942296513
SRAM error
QQ
QQ
DEVICE ERROR (0 x d∗)
13942296513
0 x 71 Did timeout at spindle on
Spindle off timeout
TEL
Spindle on timeout
6
http://www.xiaoyu163.com
5
7
8
Protection Specifications and Service Mode
QQ 376315150 892498299
Protection Specifications
The system microcomputer (CONTRL Assy IC5501) for this unit always monitors if abnormality of the power is generated, and as soon as
an abnormality is detected shuts off the power. The specifications of the microcomputer terminal for monitoring are as follows:
Name of microcomputer terminal
XPROTECT (Pin 22)
Voltage at terminal
VDET (Pin 17)
Abnormality of AMP-system power
Short-circuiting of the SP terminal, etc.
Abnormality of power inside the DVDM
Assy
In normal conditions
In abnormal conditions
0.71× Vdd∗ or more
0.36×Vdd–0.71× Vdd∗
0.5 Vdd-0.85 Vdd∗
In failure
0.36×Vdd∗ or less
Monitoring item
Monitoring start time
Time required for determining abnormality
0.85 Vdd∗ or more
0.5 Vdd∗ or less
1.5 sec after power is turned on
0.5 sec after detection
1.5 sec after power is turned on
0.5 sec after detection
∗Vdd = Approx. 5 V (depending on the unit)
13942296513
13942296513
This unit has Service Test mode for analyzing the above power abnormality. Its specifications are as follows:
1. Specific conditions for Service Test mode
• VDET is neglected.
• XPROTECT is neglected.
• Even if the unit is urgently shut down in failure in Normal mode, you can turn it on without waiting for one minute.
• Able to operate without AC pulse.
• Only DVD-TUNER block can operate without AMP POWER block if supplying needed DC voltage.
2. How to enter Service Test mode
• To quit Service Test mode, turn the power off or disconnect the AC power cord.
• When quitting Service Test mode, only data on protection in RAM are cleared.
4. Indications when Service Test mode starts
• Indications on the LCD display when Service Test mode starts differ depending on whether the unit was turned off normally or if the unit
[After the power is shut down because of
an abnormality in the AMP system]
LCD display P R T C T W N G
We l c om e !
LCD display V o l u m e
LCD display D V
LCD display V o l u m e
0
LCD display D V
S E R V I C E
[After the power is shut down because of
a failure in the AMP system]
LCD display P R T C T
LCD display V o l u m e
0
S E R V I C E
[After the power is shut down because of a failure
in the DVD system]
LCD display D V D
E R R
P R T E C T
LCD display V o l u m e
0
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
3. How to quit Service Test mode, and the conditions for quitting
LCD display
C
QQ
QQ
• While connecting STEST port (IC5501 Pin43) to "+5V", connect AC power cord. (See next page.)
[After the power is turned off normally]
B
TEL
TEL
In abnormal conditions or in failure, the TIMER LED flashes after the power is shut off. If the power was shut off because of an
abnormality, it can be turned on by pressing the STANDBY/ON key. However, if the power was shut off because of failure, for one
minute after a shutdown the STANDBY/ON key is disabled in order to protect against possible ignition of fumes. If the AC power
cord is pulled out during this one minute of standby, when the AC power cord is reconnected, the STANDBY/ON key will still be disabled
until the remaining seconds have elapsed.
TEL 13942296513
A
D
0
E
LCD display D V
LCD display D V
S E R V I C E
S E R V I C E
5. Operations during Service Test mode
• Basically, operations in Service Test mode are the same as in Normal mode. However, to clarify that it is in Service Test mode, during
this mode, when functions are changed, the indications on the LCD display become as follows:
[Functions]
[Indications on the LCD display]
[Functions]
[Indications on the FL display]
DVD/CD
www
TUNER
LINE1 ANA
LINE1 DIG
.
x iao y u163. co m
D V
S E R V I C E
LINE2
L 2
S E R V I C E
T X
S E R V I C E
TV
T V
S E R V I C E
L 1 a S E R V I C E
L 1 d S E R V I C E
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
83
8
1
3
http://www.xiaoyu163.com
2
4
QQ 376315150 892498299
Service Test mode connecting point
A
SIDE A
B
TEL
TEL
H CONTROL ASSY
13942296513
13942296513
Connecting point
SIDE A
CN5604
11
R5542
R5554
R5555
R5557
R5559
R5561
R5563
IC8402
14
4
1
C8404
7
C8538
5
R8422
C8412
1
C8537
8
C5606
C8402
IC8401
C8410
30
30
C8401
8
GNDD
For service
point
short
R8403
C8503
R8503
8507 C8501
IC8502
2
02
06
41
539
5607
x iao y u163. co m
IC8501
R8504
C
GNDA
Q8402
Q8403
XV-DV99
84
1
2
3
http://www.xiaoyu163.com
4
R8401
26
R5562
R5564
R5565
R5547
R5549
R5551
R5545
R5558
R5560
C5507
R5544
R5546
R5548
R5550
R5552
R5553
PRODUCTION CODE
DIRRST
5.DIRERR
XTLO
DIGSEL
XTVMUTE
1.AUDIOSELA
C8403
C8411
C8409 R8421
VPR+8
CN5502
51
.
15.DSPDI
DSPDO
DSPCK
DSPRST
DSPSS
10.DSPHREQ
DSPMODE
DIRDO
DIRCS
R5566
11
80
R5599
0MUTE
MUTEOUT
DSPMUTE
DECMUTE
R5570
R5556
VA-12
R5573
R5571
R5572
R8509 R8505 R8501
80
R5582
R5576
R5575
81
81
50
www
F
DOUT
GNDD
GNDD
GNDM
25.GNDM
VPR+8M
VPR+8M
VPR+8
VPR+8
30.VDVD+12
15.SYSCS2
SYSCS1
XDVDRST
DVDPOW
GNDD
20.GNDD
VD+5
VPR+8
VPR+8
25.GNDRTN
R5581
GNDRTN
R5580
R5579 OPTIN
GNDU
R5578 GNDU
R5577 20.DVDMUTE
R5584
R5568
R5569
C5510
R5526
R5528
30
30
50
E
30.VA-12
XPROTECT
R5574
51
7
CE3
R5583
R5531
R5532
R5541
R5540 R5533
R5534 R5535
R5536
R5537
R5538
R5539
7
CN5501
R5585
1
31
31
R5530
R5529
IC5501
1 1
1
C5508
5
E+5
100
100
5
X5501
TEST
Knife Line
L5601
R5607
ACK
R5519
R5518
1 1
376315150 892498299
R5506
R5515 R5507
UTEST
D
QQ 3763 1515 0 89 2498 299
R5505
R5504
R5502
R5501
R5522
R5521
R5520
1.CTS
KN1001
R5525
R5524
R5523
CN5601
C5603
C5604
B
GNDM
VPR+8
376315150 892498299
TEL 13942296513
VE+56
30
30
QQ
QQ
A
13
RTS
RXD
TXD
5.XVMUTE
DVDMUTE
ZERO
VDET
GNDD
10.GNDD
13
MDATA
SDATA
SCLK
11
CN3902
R5517
R5516
C5605
C
6
http://www.xiaoyu163.com
5
7
8
7.1.7 ID NUMBER AND DATA SETTING
QQ 376315150 892498299
Caution:
For the DVD players compatible with DVD-RW, for playback of a DVD-RW disc (CPRM), it is necessary that an individual ID
number and ID data are set for each player. If the ID number and ID data be not properly set in the manner described below,
future operations cannot be guaranteed. The ID number is written on the yellow label at the rear panel of the player.
If there is no yellow label, before downloading FLASH ROM, take note of the ID number set following the procedures
outlined in "ID Number Confirmation Mode" on the next page.
A
Note: Enter ID numbers while the unit is in Stop mode so that the values set will be immediately written to the flash ROM.
The following operations are all made with the TEST MODE remote control unit (GGF1381).
ID Number Input Mode
1 To enter ID Number Input Mode, with no ID number set, such as
in a case of immediately after upgrading the firmware, press the
ESC key then the STEREO key.
3 By pressing the CLEAR key without having input a number, you
can exit this mode. Each press of this key after a number has
been input deletes one digit.
6
[Player's ID Number Setting]
ID Number ?
>---------
Input ID Number !
8 After entering all 9 digits, if you press the PLAY key, the unit
compares the numbers input in Steps 2 and 6, and only if the
numbers match, that number is set as the ID. Then the unit
automatically enters ID DATA Input Mode. If the numbers do not
match, the disc tray is opened, and the unit exits ID Number
Input Mode.
Input ID Number !
4 After entering all 9 digits, if you press the PLAY key, the unit
enters Compare mode. Enter the same ID number again. Only
if your two input numbers match, the ID number is set. Compare
mode helps eliminate mistyping of the ID number.
Note: If you press the PLAY button before inputting a 9-digit ID
number, the unit returns to Step 6 without doing anything
else.
[Player's ID Number Setting]
ID Number ?
000000001
Compare
> 0 0 0 0 0 0 0 0 1 OK?
Note: If you press the PLAY button before inputting a 9-digit ID
number, the unit returns to Step 2 without doing anything
else.
5 After entering all 9 digits, if you press the SEARCH key, the
unit unconditionally sets the input number as the ID number.
Then the unit automatically enters Player's Data Input Mode.
(The SEARCH key is not accepted after all 9 digits have been
entered.)
8
Input ID Number !
www
D
<PLAY> Enter
E
[Player's ID Number Setting]
ID Number ?
> 0 0 0 0 0 0 0 0 1 OK ?
4
5
376315150 892498299
376315150 892498299
TEL 13942296513
C
QQ
QQ
QQ 3763 1515 0 89 2498 299
<CLEAR> Exit
3
[Player's ID Number Setting]
ID Number ?
000000001
Compare
>∗∗∗∗∗∗∗∗∗
13942296513
13942296513
2 Enter a 9-digit ID number. The ID number is also displayed on
the LCD display.
2
B
7 By pressing the CLEAR key without having input a number, the
unit returns to Step 2 without doing anything else. Each press
of this key after a number has been input deletes one digit.
TEL
TEL
Note: If a previous ID number and ID data, such as a factorypreset ID number and ID data, are maintained, the unit
enters ID Number Confirmation Mode when the above keys
are pressed. However, if only an ID number is maintained,
the unit enters ID Data Input Mode.
6 This display appears when the PLAY key is pressed in Step 4.
Enter a 9-digit number to compare. The number is also
displayed on the LCD display.
<PLAY>
Compare Mode
<SEARCH> Enter
x iao y u163. co m
Input ID Number !
.
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
85
8
1
2
3
http://www.xiaoyu163.com
4
ID Number Confirmation Mode
A
QQ 376315150 892498299
1 To enter ID Number Confirmation Mode after the ID number and
the ID data are set, press the ESC key then the STEREO key.
2 The ID number already set is displayed.
(It is also displayed on the LCD display.)
3 Enter a 9-digit number for comparison. This is not required
when you only wish to check the ID number visually.
(The number is also displayed on the LCD display.)
4 By pressing the CLEAR key without having input a number, you
can exit this mode. Each press of this key after a number has
been input deletes one digit.
2
<CLEAR> Exit
4
13942296513
13942296513
Input ID Number !
5 After entering all 9 digits, if you press the PLAY key, the unit
compares the number entered in Step 2 with the ID number
set, and only if the numbers match, the unit automatically exits
ID Number Confirmation Mode. If an ID data has not been
entered, the unit enters ID DATA Input Mode. If the numbers do
not match, the disc tray is opened, and the unit exits ID Number
Confirmation Mode.
QQ 3763 1515 0 89 2498 299
6 After entering all 9 digits, if you press the STOP key, the unit
compares the number entered in Step 3 with the ID number
set, and only if the numbers match, the unit automatically
deletes the ID number and exits this mode. If the numbers do
not match, the disc tray is opened, and the unit exits this mode.
(The STOP key is not accepted after all 9 digits have been
entered.)
[Player's ID Number Setting]
ID Number ?
[000000001]
Compare
> 0 0 0 0 0 0 0 0 1 OK?
<PLAY> Enter
<STOP> Memory Clear
5
6
E
Input ID Number !
www
F
.
x iao y u163. co m
XV-DV99
86
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
TEL 13942296513
Note: If you press the PLAY button before inputting a 9-digit ID
number, the unit returns to Step 4 without doing anything
else.
QQ
QQ
D
If no ID number is set, the message "No ID Number!" flashes on
the screen and LCD display for a few seconds after the power is
turned on or during Stop mode.
TEL
TEL
C
3
An ID number already set is displayed in the following cases:
1) When the ESC key then the CLEAR key are pressed, user
settings are cleared, then the ID number set is displayed on
the screen. In this case, the ID number is not displayed on the
LCD display.
2) When the unit enters ID Number Confirmation Mode by your
pressing the ESC key then the STEREO key, the ID number
set is displayed. In this case, the ID number is also displayed
on the LCD display.
If you only need to confirm the ID number, you can exit
this mode by pressing the CLEAR key or turning off the power.
• Indication when no ID number is set
[Player's ID Number Setting]
ID Number ?
[000000001]
Compare
>∗∗∗∗∗∗∗∗∗
B
• Indication of an ID number already set
6
http://www.xiaoyu163.com
5
7
8
ID DATA Input Mode
QQ 376315150 892498299
1 To enter ID DATA Input Mode, with the ID number set, press the
ESC key then the STEREO key.
2 When the STEREO key is pressed, the unit enters ID DATA
Input Mode.
5 When writing of the data read from the disc to flash ROM is
completed, "Rom Write OK!" is displayed. After seeing this
message, you can exit this mode by pressing the CLEAR key.
Note: Whether or not the data have been written to flash ROM can
be confirmed by watching for the message "Rom Write OK!"
being displayed after the disc is read.
[Player's Data Input Mode]
[Player's ID Number Setting]
ID Number ?
[000000001]
Compare
>∗∗∗∗∗∗∗∗∗
5
Rom Write OK!
B
<CLEAR> Exit
<CLEAR> Exit
<STEREO> ID Data Setting Mode
2
TEL
TEL
Input ID Number !
6 If the data cannot be read from the disc, "Disc Error!" is
displayed on the screen, and the disc is ejected.
4 To exit this mode, press the CLEAR key. While data are being
read from the DVD DATA DISC (GGV1085), you cannot exit this
mode.
[Player's Data Input Mode]
13942296513
13942296513
3 If the DVD DATA DISC (GGV1085) is loaded in this mode, the
unit automatically starts reading the data.
(If the ID DISC has already been loaded, the unit does not start
reading the data. In this case, open then close the tray.)
Disc Error!
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
6
<CLEAR> Exit
<CLEAR> Exit
Insert The ID Data Disc !
C
QQ
QQ
[Player's Data Input Mode]
4
A
• Indication when the data have not been set
If no ID data are set after the ID number is changed, the message
"NO ID DATA" flashes on the screen and LCD display for a few
seconds after the power is turned on or during Stop mode.
D
E
www
.
x iao y u163. co m
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
87
8
1
3
http://www.xiaoyu163.com
2
4
7.1.8 TROUBLE SHOOTING
Microcomputer Section (CONTROL Assy : IC5501)
A
QQ 376315150 892498299
Symptom
Possible Cause
• The unit cannot be turned on.
The unit shuts itself off soon after it is
turned on.
B
Check Method
The microcomputer was not reset.
Check if the level of the terminal XRESET (Pin 8) is "H."
If it is not, check the RESET circuit.
The AC pulse is not input.
Check if the AC pulse is input to Pin 4 of the AC input
terminal. If it is not, check the AC pulse generation circuit.
The oscillation circuit of the microcomputer
does not function.
• If the Function is DVD, the voltage of the
VDET input (Pin 17) is either 0.5 Vdd* or
less or 0.85 Vdd* or more.
• The voltage of the PROTECT input
(Pin 22) is 0.71 Vdd* or less.
• Check that the terminal (Pins 23-25, 29, and 30) for
communication with the DVD microcomputer is live,
and if it is not, check if the flexible cable is
disconnected.
• Check if an "H" signal is output to Pin 93 of the
XDVDRST terminal.
If no operation key has been pressed, check if the
voltage at Pins 18 of the KEY input terminal is 5 V. If it is
not, check if the operation switch on the line is in failure.
* Vdd= Approx. 5V (depending on the unit)
ex.) 0.85Vdd= 0.85 × 5 (V)
= 4.25 (V)
C
E
www
F
.
x iao y u163. co m
XV-DV99
88
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
D
QQ
QQ
QQ 3763 1515 0 89 2498 299
TEL 13942296513
13942296513
13942296513
All operation keys are disabled.
The unit recognizes that an operation key
has already been pressed.
If the voltage at Pin 17 of the VDET terminal of the
microcomputer is either 0.5 Vdd or less or 0.85 Vdd or
more, adjust so that it stays between 0.5 and 0.85 Vdd.
TEL
TEL
• DVD does not operate at all.
Communication with the DVD
• Time is not displayed in LCD display
microcomputer has not been established.
during DVD function.
The microcomputer or the oscillation circuit is broken.
Change the microcomputer or the oscillation circuit.
6
http://www.xiaoyu163.com
5
7
8
DVD Section
QQ 376315150 892498299
No.
Symptoms
Possible Defective Points
Diagnosis Contents
A
An opening screen is not
Is the level at both IC5501-pin 93 (XDVDRST) and pin 1(DVD ON/OFF)
µcom (CONTROL IC5501)
displayed on the monitor
on the CONTROL Assy "H" ?
(The LCD display lights. The
Check the voltage of CN901-pin 28 and 29 (VPR+8) on the DVDM
mechanism does not work.)
DVDM Assy CN901
Assy.
1
Check that the following voltages are output :
IC411-pin 3 : 1.8V, IC421-pin 3 : 1.8V and IC431-pin 1 : 5V on the
DVDM Assy
Each regulator on the DVDM
Assy
Are resonators (27MHz, 20MHz) on the DVDM Assy oscillating ?
Crystal resonator
(DVDM Assy X601 and X301)
Refer to contents of an FE error displayed on the LCD display.
(SRAM defectiveness, I2C communication line defectiveness, etc.)
FRONT END IC
(DVDM IC301)
B
TEL
TEL
• Is a signal input into IC601-pin 132 (CE3) on the DVDM Assy ?
(Is a signal fluctuating for several seconds after the power is turned on ?) • BACK END IC (DVDM IC601)
→ Communication with flash ROM
• Flash ROM (DVDM IC603)
• Are the signals input into IC602-pin 16 (SMIWE), pin 19 (SMICS0)
• 64M SDRAM (DVDM IC602)
and pin 38 (SMICLK) on the DVDM Assy ?
(Is a signal fluctuating ?)
→ Communication with flash ROM
13942296513
13942296513
• BACK END IC (DVDM IC601)
Is a signal output from IC603-pin 28 (CPU_OE) on the DVDM Assy?
(Is a signal fluctuating for several seconds after the power is turned on ?) • Flash ROM (DVDM IC603)
µcom (CONTROL IC5501)
Is a signal output from IC5501-pin 29 and 30 (SYS_1, 2) on the AF
Assy ?
(Is a signal fluctuating in the range of 0-5V ?)
µcom (CONTROL IC5501)
µcom (AF IC5501) – BACK END
Are the signals output from IC5501-pin 23, 24 and 25 on the CONTROL
IC (DVDM IC601)
Assy? (in the range of 0-5V)
communication line
2
3
An opening screen is not
Check the video signal path between BACK END IC (DVDM IC601) and DVDM Assy
displayed on the monitor
• Video circuit
(The LCD display lights. The video-out terminal
• after BACK END IC (IC601)
(see
the
block
diagram)
mechanism does not work.)
A tray cannot be opened.
(An opening screen is
displayed on the monitor)
• Are wires of CN103 on the DVDM Assy disconnected or damaged ?
Connector / wire
LOADING SW (LOAB S101)
• Is a LOAD-DRVC signal reaching ?
• Does the voltage of CN105 pin 1 change by pressing the Inside
switch
BACK END IC (DVDM IC601)
Inside switch
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
C
QQ
QQ
Is a signal input into IC5501-pin 67 (DVDACK) on the CONTROL Assy
?
(Is a signal fluctuating ?)
D
E
www
.
x iao y u163. co m
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
89
8
1
3
http://www.xiaoyu163.com
4
QQ 376315150 892498299
No.
A
2
Symptoms
Possible Defective Points
Diagnosis Contents
Playback impossible
(no focusing)
4
Are the signals output from IC101-pin 34 (F_DRV) and pin 35
(F_RTN) on the DVDM Assy ?
FTS Driver IC (DVDM IC101)
Does 650-nm LD emit light ?
Does a pickup lens move up / down ?
Does an actuator spring bend ?
Pickup
• Are plastic parts damaged? Or is a shaft detached?
• Is the turntable detached or tilted?
Mechanism section
Is flexible cable of CN101 on the DVDM Assy disconnected or damaged
Flexible cable / connector
?
Is signal output from IC301-pin 33 (FACT) on the DVDM Assy ?
(Device control of about 2.6 V is output usually. It is fluctuated by about FRONT END IC (DVDM IC301)
± 100 mV with focus up / down.)
Playback impossible
(Spindle does not turn)
B
FTS Driver IC (DVDM IC101)
Is there any part detached from the spindle motor?
Or Is there any foreign object lodged in it?
Mechanism section
(Spindle motor)
Are wires of CN105 (DVDM Assy) disconnected or damaged ?
Is signal output from IC301-pin 44 (SPDL_PDM) on the DVDM Assy ?
FRONT END IC (DVDM IC301)
650-nm
LD deteriorated.
Does 650-nm LD deteriorate ?
If the voltage at both ends of R201 on the DVDM Assy is 0.7 V or more, (When playback of a DVD is
impossible)
the 650-nm LD is definitely deteriorated.
Playback impossible
(Playback stops)
C
780-nm LD deteriorated.
Does 780-nm LD deteriorate ?
If the voltage at both ends of R211 on the DVDM Assy is 1.5 V or more, (When playback of CD is
impossible)
the 780-nm LD is definitely deteriorated.
6
Are there scratches or dirt on the disc ?
Disc
Are there scratches or dirt on the disc ?
Disc
Is there a problem with the format of the disc?
Disc
QQ 3763 1515 0 89 2498 299
TEL 13942296513
Picture disturbance during
playback
(block noise, freeze, other)
No sound
(Picture is normal)
Is signal output from DOUT signal (CN901-pin 21) on the DVDM Assy ? BACK END IC (DVDM IC601)
D
E
www
F
.
x iao y u163. co m
XV-DV99
90
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
8
FG output : FTS Driver IC
(DVDM IC101)
QQ
QQ
7
Is there abnormality in FG waveform ?
13942296513
13942296513
Flexible cable / connector
TEL
TEL
5
Are the signals output from IC101-pin 12 (A3), pin 13 (A2) and pin 14
(A1) on the DVDM Assy ?
Is pin 41 fixed LOW and is pin 38 fixed HIGH ?
6
http://www.xiaoyu163.com
5
7
8
7.1.9 DSP TROUBLE SHOOTING
QQ 376315150 892498299
• When a sound is not out in the surround mode with the digital signal input.
• Suppose C,R parts to be poor contact and that is not damaged.
• This shows failure analysis of DSP Assy.
Step 1
A
Step 2
IC8501-pin 21
Is output
signal "L"?
IC8901
No
Is 5V
inputting ?
Replace IC8501.
Yes
No
Check CN8003 and
other assemblies.
Yes
KN8102
Is 3.3V
outputting ?
No
B
Replace IC8901.
Yes
Tighten screws.
TEL
TEL
Is the
screw is fastened
at KN8102
(earth point)?
No
IC8902
Yes
Is 1.8V
outputting ?
CN8003
No
13942296513
13942296513
Yes
Replace IC8902.
Yes
Is connector
inserted tightly
?
No
Insert it tightly.
End
Yes
No
Step 3
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
Is connector
inserted tightly
?
QQ
QQ
CN8007
IC8702
Insert it tightly.
Yes
Pin 3
CN8011
Is connector
inserted tightly
?
No
Do perform
3V→5V conversion
for pin 17 ?
Insert it tightly.
No
Replace IC8702.
Yes
Yes
Pin 5
End
Do perform
3V→5V conversion
for pin 15 ?
No
C
D
Replace IC8702.
E
Yes
Pin 7
www
Do perform
3V→5V conversion
for pin 13 ?
No
Replace IC8702.
x iao y u163. co m
Yes
A
.
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
91
8
1
A
2
3
http://www.xiaoyu163.com
4
QQ 376315150 892498299
A
B
Pin 9
Pin 5
Do perform
3V→5V conversion
for pin 11 ?
No
Do perform
5V→3V conversion
for pin 15 ?
Replace IC8702.
Pin 7
Pin 12
Do perform
3V→5V conversion
for pin 8 ?
No
Do perform
5V→3V conversion
for pin 13 ?
Replace IC8702.
Pin 9
Do perform
5V→3V conversion
for pin 11 ?
Replace IC8702.
Pin 12
Do perform
5V→3V conversion
for pin 8 ?
Yes
Pin 14
No
Do perform
5V→3V conversion
for pin 6 ?
Replace IC8702.
Yes
Replace IC8701.
Pin 16
Do perform
5V→3V conversion
for pin 4 ?
Step 4
IC8701
No
Replace IC8701.
Yes
E
Pin 18
Pin 3
www
No
Yes
End
No
Do perform
5V→3V conversion
for pin 2 ?
Replace IC8701.
No
Replace IC8701.
x iao y u163. co m
Yes
Yes
End
B
F
Replace IC8701.
Yes
Pin 18
Do perform
5V→3V conversion
for pin 17 ?
No
.
XV-DV99
92
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
Replace IC8702.
QQ
QQ
No
TEL 13942296513
Do perform
3V→5V conversion
for pin 2 ?
Replace IC8701.
Yes
Pin 16
D
No
13942296513
13942296513
No
Yes
Do perform
3V→5V conversion
for pin 4 ?
Replace IC8701.
TEL
TEL
Pin 14
C
No
Yes
Yes
Do perform
3V→5V conversion
for pin 6 ?
Replace IC8701.
Yes
Yes
B
No
6
http://www.xiaoyu163.com
5
7
8
Step 5
QQ 376315150 892498299
A
IC8201
Is SPDIF signal coming?
(be different with Function)
Check
the DVD/CD
(pin 7).
No
Check the other assemblies.
(AF Assy or DVDM Assy)
No
Check the OPTICAL IN line between VIDEO ASSY and DSP ASSY.
(Optical Input Jack or Connectors)
Yes
B
TEL
TEL
Check
the OPTICAL IN
(pin 48).
Yes
No
Is input
signal of PDN
(pin 31) "H"?
No
13942296513
13942296513
Is
MCKO1 (pin 23)
outputting it?
Check the other assemblies.
(periphery of microcomputer on the AF Assy)
Yes
Yes
Do not
oscillate of XTO
(pin 29)?
Yes
No
Is
LRCK (pin 24)
outputting it?
No
Replace IC8201.
Replace IC8201.
QQ 3763 1515 0 89 2498 299
Yes
Is
SDTO (pin 25)
outputting it?
No
Replace IC8201.
Yes
Is
BCK (pin 26)
outputting it?
No
C
Yes
376315150 892498299
376315150 892498299
TEL 13942296513
No
QQ
QQ
Note:
X8201 oscillates
only in analog input.
Is output
signal of INT0
(pin 36) "H"?
Replace IC8201.
Yes
D
IC8502-pin2
E
Is
20MHz clock
outputting it?
No
Replace IC8502 or X8501.
Yes
www
End
.
x iao y u163. co m
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
93
8
1
2
3
http://www.xiaoyu163.com
QQ 376315150 892498299
Step 6
A
4
Step 7
IC8401
IC8501
Pin 21
Pin 4
Does
a signal output
it?
No
Does
a signal output
it?
Replace IC8501.
No
Replace IC8401.
Yes
Yes
Pin 22
Pin 5
B
Does
a signal output
it?
No
Does
a signal output
it?
Replace IC8501.
No
Replace IC8401.
Yes
TEL
TEL
Yes
Pin 23
Pin 6
No
Replace IC8501.
No
Replace IC8401.
Yes
Pin 24
Yes
Pin 7
C
No
No
Replace IC8401.
Yes
Replace IC8501.
Pin 25
Yes
376315150 892498299
End
Does
a signal output
it?
No
Replace IC8401.
Yes
D
Pin 26
Does
a signal output
it?
No
Replace IC8401.
Yes
Pin 27
Does
a signal output
it?
E
No
Replace IC8401.
Yes
Pin 28
Does
a signal output
it?
www
F
No
Replace IC8401.
x iao y u163. co m
Yes
End
.
XV-DV99
94
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
QQ
QQ
Does
a signal output
it?
Does
a signal output
it?
13942296513
13942296513
Does
a signal output
it?
Does
a signal output
it?
6
http://www.xiaoyu163.com
5
7
8
7.1.10 SEQUENCE AFTER POWER ON
QQ 376315150 892498299
Reset Start
• It starts when the XRESET terminal (Pin 8) is "H" level.
Initialization routine
A
Microcomputer IC (PDC110B) (CONTROL Assy : IC5501)
Microcomputer
initialization
Model
identification
• The inputs to Pins 15 and 16 are inspected and the model identification is performed.
B
No
TEL
TEL
Demonstration mode
permission
• Whether Demonstration mode is entered or not can be
determined by inspecting the backup data.
• The default setting is "Demonstration mode OK."
Demonstration mode
13942296513
13942296513
Yes
Standby setting
Main loop processing
No
Standby
376315150 892498299
376315150 892498299
Demonstration mode ?
QQ
QQ
QQ 3763 1515 0 89 2498 299
TEL 13942296513
Yes : Power ON
System power supply on
DVD microcomputer start-up
Relay release
Demonstration mode
or Normal power ON mode
C
• The level of the POWER terminal (Pin 91) is "H".
• Only in DVD function, the level of the DVD RESET terminal (Pin 93) is "H".
• The speaker relay is turned on about four seconds after the power is turned on.
• The level at the RELAY ON/OFF terminal (E-VOL IC Pin1,Pin2) are "H."
• The system mute is released about four seconds after the power is turned on.
The level of the SYSMUTE terminal (Pin 94) is "H".
• Muting is not released in the following cases.
• When the main volume is 0.
• When the digital LINE 1 function input signal is not locked,
or when the DSP MUTE terminal (Pin 87) is in error.
D
E
x iao y u163. co m
• If no pulse is input to the AC terminal (Pin 4) for about 60 msec, the microcomputer becomes in Memory Backup mode,
it will not do any processing.
• The unit will recover from Memory Backup mode if a reset command is input to the XRESET terminal (Pin 8).
www
.
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
95
8
1
3
http://www.xiaoyu163.com
2
4
QQ 376315150 892498299
[ STANDBY ON TIMING CHART ]
A
PON2
150 msec
PON1
30 msec
ON →Standby
PON4
1500
PON3
480 msec
PON5
1890
PON8
2070
PON7
2040
PON6
2010
KEY In
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
3900
4200
4500
4800
5100
5400
5700
6000
6300
AMP Control
POWER RELAY H
(P91• • SYSPOW) L
SYSTEM MUTE H
(P94• •XSYSMUTE) L
MAIN VOL SET
(P95,P96, P97)
H
L
CENTER MUTE
(VOL IC Exp. Port)
H
L
FR/SW/C RELAY
(VOL IC Exp. Port)
REAR RELAY
(VOL IC Exp. Port)
HP VOL SET
(P83,P96, P97)
B
HP MUTE
(P31 • • XHPMUTE)
send VOL data
set
H
L
send VOL=0 data for
IC initialization
set SEND demand at DSP
side (data is VOL=0)
set SEND demand at DSP
side (data is VOL=0)
set SEND demand at DSP
side (data is VOL=0)
send VOL data
set
MUTE ON until this point when HP not exist.
Same timing with SYSTEM MUTE when exist
H
L
H
L
DIGITAL INPUT SEL
(P59 • • DIGSEL)
H
L
INPUT SELECT SET
(P71,P74, P75)
DVD-A & SACD SEL
(P70 • • AUDIOSELA)
DIMMER CONTROL
(P47,P48)
H
L
MUTE ON until
this point when
HP exist
It may be after this point as it actualy makes OR with DSP MUTE.
It may be after this point as it actualy makes OR with DSP MUTE.
H
L
13942296513
13942296513
H
L
H
L
H
L
Start tranfering normal display data
Start transfering
set data to LCD
H driver
L
DVD Control
H
L
DVD VIDEO MUTE
(P68 • • XVMUTE)
H
L
SYSTEM BUS
(P23,24,25,29,30,67)
H
L
QQ 3763 1515 0 89 2498 299
TEL 13942296513
H
L
Communication start
DSP Control
DIR/CODEC RESET H
L
(P78 • • DIRRST)
DIR/CODEC Communi. H
L
(P79,80)
XTL0 (to DIR
H
L
(P76 • • XTL0)
DSP RESET
H
(P85 • • XDSPRST) L
transfer set data
Communication start
DSP Control Communi. H
L
(P26,27,28)
DSP MUTE
(P87 • • XDSPMUTE)
H
L
TUNER Control
Communication start
*Not cancel MUTE when the intialization communication has not finished according to the DSP hardware state.
transfer reset data
TUNER Control Communi. H
L
(P57,61,62)
TX MUTE
H
L
(P63 • • TXMUTE)
RDS POWER
H
(P64 • • XRDSPOW) L
set initial data of the port
OTHERS
Other Output Port
E
Communication start
H each H/L following
L
H
L
H
L
H
L
www
F
.
x iao y u163. co m
XV-DV99
96
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
DVD POWER
(P1 • • DVD ON/OFF)
DVD RESET
(P93 • • XDVDRST)
QQ
QQ
D
set SEND demand at DSP
side (data is VOL=0)
H
L
H
L
LCD SET
(P49,50,51)
set SEND demand at DSP
side (data is VOL=0)
H
L
TV(SCART)MUTE
(P92 • • XTVMUTE)
LINE1/LINE2/TV
ATT (P41,P42)
DVD-A -6dB ATT
(P90 • • DVD6dBATT)
LCD Control
set SEND demand at DSP
side (data is VOL=0)
TEL
TEL
C
REC MUTE
(P32 • • XRECMUTE)
send VOL=0 data for
IC initialization
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
[ STANDBY ON SEQUENCE ]
Set Time from
Former Step
Function
SY_PON0
Passing Time
0 msec
Start the POWER ON
Each Initial Setting 1
30 msec
Each Initial Setting 2
• SYSTEM POWER ON (Pin No.91 : L)
• Set the One-Shot Display of " WELCOME " (display time : 3.5 sec)
SY_PON2
+ 120 msec
150 msec
Each Initial Setting 3
+ 330 msec
QQ 3763 1515 0 89 2498 299
480 msec
Each Initial Setting 4
• Start transfering to the LCD driver if the remote control port data is
High.
• Set the DIGITAL INPUT (Pin No.59)
• Set the INPUT FUNCTION (Selector : BU4051) (Pin No.71,74,75)
• Start the BUS communication
SY_PON4
+ 1020 msec
1500 msec
Each Initial Setting 4
SY_PON5
+ 390 msec
1890 msec
Each Initial Setting 5
SY_PON6
+ 120 msec
2010 msec
Each Initial Setting 6
SY_PON7
+ 30 msec
2040 msec
Each Initial Setting 7
376315150 892498299
376315150 892498299
TEL 13942296513
SY_PON3
www
+ 30 msec
.
2070 msec
POWER ON Finished
x iao y u163. co m
F
XV-DV99
5
6
D
E
• Clear the MASK FLAG of all keys.
• Clear the MASK FLAG of normal key.
• POWER Lines MUTE OFF (SYSTEM MUTE REQUEST)
SY_PON8
C
QQ
QQ
• Set +5V ON (the Power is stabilized) FLAG
• Transfer the initial data to the MAIN VOLUME IC.
• Transfer the initial data to the HEADPHONE IC.
13942296513
13942296513
+ 30 msec
B
TEL
TEL
• Set the MASK FLAG of all keys
• Set the MASK FLAG of normal key
• POWER Lines MUTE ON (SYSYTEM MUTE REQUEST)
• MUTING FLAG CLEAR (SYSTEM MUTE REQUEST)
• VOLUME Lines MUTE REQUEST CLEAR (SYSTEM MUTE REQUEST)
• DSP MUTE REQUEST CLEAR(SYSTEM MUTE REQUEST)
• AMP Lines MUTE REQUEST CLEAR (SYSTEM MUTE REQUEST)
• TUNER MUTE REQUEST CLEAR (SYSTEM MUTE REQUEST)
• EMERGENCY POWER OFF FLAG CLEAR
• LCD Driver STAND-BY
• Set the TIMER for canceling the SP-Relay (5 sec)
• Set the TIMER for starting the PROTECT Process (1.5 sec)
• PROTECT FLAG CLEAR
• REC MUTE ON (Pin No.32 : L)
• HEADPHONE MUTE ON (Pin No.31 : L)
SY_PON1
A
Detail about the Control
http://www.xiaoyu163.com
7
97
8
1
3
http://www.xiaoyu163.com
2
4
QQ 376315150 892498299
[ STANDBY OFF TIMING CHART ]
A
POFF2
150 msec
POFF1
30 msec
ON →Standby
POFF4
1500
POFF3
480 msec
POFF6
1920
POFF5
1890
KEY In
7800
300
600
900
1200
1500
1800
2100
2400
2700
3000
3300
3600
3900
4200
4500
4800
5100 • • • • • • • •
6900
7200
7500
AMP Control
POWER RELAY H
(P91 • • SYSPOW) L
SYSTEM MUTE H
(P94 • • XSYSMUTE) L
MAIN VOL SET
(P95,P96,P97)
H
L
Set Send Demand at
DSP side. (data is VOL=0)
CENTER MUTE H
(VOL IC Expand Port) L
B
H
L
HP VOL SETTING
(P93,p96,p97)
H
L
TV(SCART) MUTE H
(P92 • • XTVMUTE) L
LINE1/LINE2/TV
ATT (P41,P42)
H
L
DVD-A -6dB ATT H
(P90 • • DVD 6dBATT) L
DIGITAL INPUT SEL H
(P59 • • DIGSEL) L
INPUT SELECT SET H
(P71,P75,P75)
L
DVD-A & SACD SEL H
(P70 • • AUDIOSELA) L
DIMMER CONTROL H
L
(P47,P48)
Hold the previous data for 5 seconds after this point (after POFF6)
LCD Control
H
L
Hold the communication after this point (after POFF6)
DVD Control
DVD VIDEO MUTE
(P68 • • XVMUTE)
H
L
H
SYSTEM BUS
(P23,24,25,29,30,67) L
It becomes Low according to the DVD module side state somewhere from this point to 7.5 seconds after.
It becomes Low according to the DVD module side state somewhere from this point to 7.5 seconds after.
QQ 3763 1515 0 89 2498 299
It becomes Low according to the DVD module side state somewhere from this point to 7.5 seconds after.
Continue the commnunication
Stop the commnunication at POFF5
DSP Control
DIR/CODEC RESET H
(P78 • • DIRRST) L
DIR/CODEC
H
(P79,80)
L
XTL0 (to DIR)
(P76 • • XTL0)
Stop the commnunication at POFF0
H
L
DSP RESET
H
(P85 • • XDSPRST) L
DSP Control Commun.H
(P26,27,28)
L
Stop the commnunication at POFF0
DSP MUTE
H
(P87 • • XDSPMUTE) L
TUNER Control
TUNER Control Commun.H
(P57,61,62,66)
L
TX MUTE
H
(P63 • • TXMUTE) L
State able to communicate
Stop the commnunication at POFF6
Hold the previous data after POFF0
OTHERS
Other OUTPUT PORT H
L
H
L
H
L
H
L
www
F
.
x iao y u163. co m
XV-DV99
98
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
TEL 13942296513
DVD POWER
H
(P1 • • DVD ON/OFF) L
DVD RESET
H
(P93 • • XDVDRST) L
QQ
QQ
LCD SETTING
(P49,50,51)
RDS POWER
H
(P64 • • RDSPOW) L
E
Set Send Demand at
DSP side. (data is VOL=0)
HP MUTE
H
(P31 • • XHPMUTE) L
REC MUTE
H
(P32 • • XRECMUTE)L
13942296513
13942296513
D
H
L
REAR RELAY
(VOL IC Expand Port)
TEL
TEL
C
FR/SW/C RELAY
(VOL IC Expand Port)
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
[ STANDBY OFF SEQUENCE ]
Set Time from
Former Step
Function
SY_POFF0
Passing Time
0 msec
Start the POWER OFF
Each Initial Setting 1
30 msec
Each Initial Setting 2
• If it is not the Emergency POWER OFF,
Set the Admission FLAG of the SP-Realy OFF
Check if the DVD is POWER OFF OK
Each Initial Setting 3
150 msec
SY_POFF3
+ 330 msec
480 msec
Each Initial Setting 4
SY_POFF4
+ 1020 msec
1500 msec
Each Initial Setting 4
SY_POFF5
+ 390 msec
1890 msec
Each Initial Setting 5
TEL 13942296513
QQ 3763 1515 0 89 2498 299
376315150 892498299
376315150 892498299
+ 120 msec
• Clear 5V ON (the Power is stabilized) FLAG
• SYSTEM POWER OFF (Pin No.91 : L)
• DVD DEBUG MODE CLEAR
• Finished the BUS communication.
SY_POFF6
www
+ 30 msec
1920 msec
POWER OFF Finished (passes every loop in the POWER OFF)
• Clear the MASK FLAG of all keys.
• Hold to set the MASK FLAG of normal key
• Clear the Emergency POWER OFF FLAG
• Clear the Admission FLAG of SP-Relay OFF
• POWER Lines MUTE OFF (SYSTEM MUTE REQUEST)
• Clear the LINE TEST MODE FLAG
• REC MODE OFF
• PORT Process in the POWER OFF
• Only when the 5 sec after point after the POWER OFF,
REC MUTE OFF (Pin No. 32 : H)
HEADPHONE MUTE OFF (Pin No.31 : H)
TV MUTE OFF (Pin No.92 : H)
Set the DIMMER PORT OFF (Pin No. 47,48 : H)
.
6
http://www.xiaoyu163.com
7
D
E
x iao y u163. co m
F
XV-DV99
5
C
QQ
QQ
SY_POFF2
13942296513
13942296513
+ 30 msec
B
TEL
TEL
• Set the MASK FLAG of all keys
• Set the MASK FLAG of normal key
• POWER Lines MUTE ON (SYSYTEM MUTE REQUEST)
• MUTING FLAG CLEAR (SYSTEM MUTE REQUEST)
• Set the transfer demand of the VOLUME DATA to the DSP module.
(The DSP module controls the MAIN VOLUME.)
• Set the Counter for not coming DVD POWER OFF information.(20sec)
• MENU clear
• Clear the demand of One-Shot Display.
• Clear the RAM relative to PROTECT if in SERVICE TEST MODE.
• Force to set the each data to the Factory Setting state in the TEST
MODE except the SERVICE TEST MODE.
• Clear the TEST MODE FLAG except the LINE TEST MODE
• Clear the RAM FLAG relative to the TIMER.
• DEMO CLEAR
SY_POFF1
A
Detail about the Control
99
8
1
3
http://www.xiaoyu163.com
2
4
7.1.11 SINGLE OPERATION METHOD
QQ 376315150 892498299
• Please connect DISPLAY UNIT (AXX7163) in order to use Remote Control Unit.
Service TEST mode
TEST MODE : ON
Turn off
power
switch of
DC power
supply.
TEST MODE
Connect each power
supply firmly stabilizing
as shown in the figure
below and shortcircuit
the 3 GND points.
B
VE+5
Turn on power
switch of DC power
supply.
TEST
MODE
TEST
CONTROL Assy
H CONTROL ASSY
TEL
TEL
SIDE A
SIDE A
CN5604
UTEST
L5601
R5607
X5501
R5585
R5531
R5532
R5541
R5540 R5533
R5534 R5535
81
81
30
30
C5508
11
R5205
C8529
C8535
D8523
D8521
GNDM
For
service
short
point
R8406
R8511
R8408
4
1
C8513
5
R8515
1
C8533
D8517
D8519
R8513
C8515
IC8503
R8517
4
R8403
R8404
R8409
C8517
C8523
5
R8529 R8525
C8534
D8518
C5206
L5202
Q5201
L5203
R5201
Q5202
R8407
C8531
C8536
D8524
D8522
D8520
R5206
Q8401
IC8505
8
C8530 IC8506
Q8402
Q8403
R8405
8
C8503
R8503
GNDA
C8527
R8523
R8521 1
4
8
R8528 C8526
4
1
5
8
R8526
5
4
5
C8502
1
R8508
C8532
R8530
UN+56
L5201
R5202
D1002
C5576
IC8502
8
R8504
C8504
R8522
C1002
R5204
D1001
C1001
C1010
D1006
C1007
C8538
R8422
C8412
R8502
R8510 R8506
C8541
C8539
C5607
123.0mm
C8537
5
Knife Line
C8404
8
C5572
For service
point
short
IC8501
C5203
C8521
D8509
D8515 D8511
D8513
C8524
D8514
D8516
20
20
x iao y u163. co m
C5575
C5204
L5204
L5205
D5205
D5202
D5201
D5203
L5571
CN5603
C5578
.
7
R8524
C8528
OUT
IN
1
GNDD
R8527 C8525
C5606
C8402
IC8401
C8410
shortcircuit GND
(GNDA, GNDD,
GNDM)
C8401
8
R8519
4
www
F
R5554
R5555
R5557
R5559
R5561
R5563
14
GND
Turn off power
switch of DC
power supply.
R5558
R5560
R5547
R5549
R5551
R5545
R5544
R5546
R5548
R5550
R5552
R5553
PRODUCTION CODE
IC8402
VPR+8
IC1001
TEST MODE : STOP
DIRRST
5.DIRERR
XTLO
DIGSEL
XTVMUTE
1.AUDIOSELA
C8403
C8411
C8409 R8421
IC1004
E
R5562
R5564
R5565
C5507
R5556
1
DC +10V
power supply
15.DSPDI
DSPDO
DSPCK
DSPRST
DSPSS
10.DSPHREQ
DSPMODE
DIRDO
DIRCS
R5566
CN5502
R5542
0MUTE
MUTEOUT
DSPMUTE
DECMUTE
R5570
C8519
51
R5599
R5573
R5571
R5572
R8509 R8505 R8501
51
R8507 C8501
80
80
D
VA-12
VPR+12
D5206
CN5602
CN5201
1
1
7
1
1
7
XV-DV99
100
1
2
3
http://www.xiaoyu163.com
4
DC +14V
power supply
376315150 892498299
R5574
50
R5536
R5537
R5538
R5539
VD+5
R5584
VPR+8
R5583
R5582 VPR+8
25.GNDRTN
R5581
GNDRTN
R5580
R5579 OPTIN
GNDU
R5578 GNDU
R5577 20.DVDMUTE
R5576
R5575
QQ 3763 1515 0 89 2498 299
50
376315150 892498299
TEL 13942296513
DC –14V power supply
30.VA-12
XPROTECT
QQ
QQ
R5529
7
7
CN5501
CE3
100
100
31
31
R5530
1 1
1
R5568
R5569
C5510
R5526
IC5501
30
30
E+5
1
R5528
TEST
B
GNDM
VPR+8
C5603
C5604
R5505
R5504
R5502
R5501
R5506
R5515 R5507
DOUT
GNDD
GNDD
GNDM
25.GNDM
VPR+8M
VPR+8M
VPR+8
VPR+8
30.VDVD+12
15.SYSCS2
SYSCS1
XDVDRST
DVDPOW
GNDD
20.GNDD
ACK
R5517
R5516
C5605
R5520
30
30
R5519
R5518
C
CN5601
5
Service mode
short point
R5522
R5521
R5525
R5524
R5523
VE+56
13
RTS
RXD
TXD
5.XVMUTE
DVDMUTE
ZERO
VDET
GNDD
10.GNDD
1.CTS
KN1001
A
5
DC +6V
power supply
13
MDATA
SDATA
SCLK
11
CN3902
13942296513
13942296513
11
1 1
A
6
http://www.xiaoyu163.com
5
7
8
7.1.12 PROTECTION CIRCUIT
QQ 376315150 892498299
If the TIMER LED on the front panel flashes, check the protection circuit.
Note: If the protection circuit activates, the unit will not recover for 60 seconds even if the AC power cord is disconnected then
reconnected. If you activate Service Test mode, the protection circuit becomes invalid, which makes diagnosis easy. (To activate Service
Test mode, while connecting STEST port (IC5501 Pin43) to "+5V", connect AC power cord.)
There are three types of operations for the protection circuit, which are indicated on the FL display when Service Test mode is entered:
A
PRTCT WNG: The unit was shut down because of an abnormality in the AMP system. (The PROTECT line operates at the MID level.)
PRTCT ERR: The unit was shut down because of a failure in the AMP system. (The PROTECT line operates at the LO level.)
DVD PRTECT: The unit was shut down because of a failure in the DVD system. (The VDET line operates at the HI or LO level.)
Conditions for the protect circuit operations
Voltage
PROTECT
FL display in Service Test mode
>3.55V
Normal
MID level
1.8V - 3.5V
The unit is shut down because of an abnormality.
B
PRTCT WNG
LO level
<1.8V
The unit is shut down because of a failure.
PRTCT ERR
HI level
>4.25V
The unit is shut down because of a failure.
DVD PRTECT
MID level
3.3V
Normal
LO level
<2.5V
The unit is shut down because of an abnormality.
TEL
TEL
VDET
Conditions
HI level
DVD PRTECT
13942296513
13942296513
1 When the Speaker terminal becomes overloaded
[Sub Woofer side]
R3353
1.8k
B
R3355
33k
D3353
R3351
0.1
[Sub Woofer side]
D
A
C
POWER Assy
6CH AMP Assy
VD+5
Front L ch
Q3601
R108
27k
GND FL
to
XPROTECT
+5V
D3351
R3601
4.7k
Q3603
R5527
270k
C
Q3602
C3605
0.1
H
B
376315150 892498299
376315150 892498299
TEL Protection
13942296513
3763WNG
15error
15 0 89 2498 299
QQa PRTCT
circuit that activates against
C
QQ
QQ
The possible failures for each error message are as follows:
PRTCT WNG:
• The Speaker terminal became overloaded because of short-circuit. (See 1.)
PRTCT ERR:
• The main power supply became LO level because of short-circuit or disconnection of connectors. (See 2.)
• Disconnection of the FAN connector or interruption of rotation of the fan (See 3.)
• DC was generated at the output because of a failure in the AMP system, etc. (See 4.)
• Abnormal temperature was detected by the thermistor. (See 5.)
DVD PRTECT:
• An error was generated in the main power supply inside the DVDM. (See 6.)
D
CONTROL Assy
E
E
In Normal mode, the speaker (6 ohms) is connected between the
FL and GND FL points. Because the voltage at Point A is higher
than that at Point B, Q3601 does not operate.
If the resistance between the FL and GND FL points becomes
1.83 ohms or less, Q3601 begins to operate, Q3602 is turned on,
Q3603 (E, C, and B)is turned on, and the level of XPROTECT
becomes MID.
→ The microcomputer detects the XPROTECT level and
shuts the power to the unit off.
www
.
x iao y u163. co m
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
101
8
1
3
http://www.xiaoyu163.com
2
4
Protection circuit that activates against a PRTCT ERR error
A
QQ 376315150 892498299
2 When the main power supply becomes LO level
because of short-circuit or disconnection of
connectors
2 -1 Short-circuit-detection circuit for the amplifier
power circuit (VH+[VP+15], VD+5, -12 V [VA-12])
Circuit for shutting the power off when VP+15, VD+5, or VA-12
is short-circuited to ground (GND)
[Sub Woofer side]
C
6CH AMP Assy
VD+5
B
E
B
C
R101
(R104)
1k
B
+
C101
(C102)
1/50
B
R102
(R105)
10k
C2
Q102_2/2
(Q104_2/2)
VPF+15
R3654
1.8k
R108
27k
C2
Q3651_2/2
RN1901
C
B2
B2
D3658
UDZS7.5B
B
+
E2
E
A
Q3652
DTA124TK
R3657
33(1/4W)
R3658
2.2k
FAN+
Q3651_1/2 C3652 D3657
47/50 1SS355
RN1901
C2
R103
(R106)
10k
A
VD+5
to
XPROTECT
(µ-com)
Q101_2/2
(Q103_2/2)
B2
6CH AMP Assy
E2
R109
820
R3655
8.2k
D105
(D106)
VH–
* ( )means the wiring No. of VP+15 line.
(VA–12)
• In Normal mode, as Q101 (Q103) (E2, B2, C2) and Q102
(Q104) (E2, B2, C2) are on, the voltage at Point A is about 5 V.
The voltage at Point B is therefore about the same. As Q101
(Q103) (E, C, B) is off, Q102 (Q104) (E, C, B) is also off.
FAN–
D3651-D3654
1SS133×4
R3656
22k V-12F
If no fan is connected between FAN+ and FAN-, or when the fan
cannot rotate because of a foreign object caught in the blades, the
BASE of Q3652 becomes OPEN, and Q3652 and Q3651-1/2 (E, C,
B) are turned off. Then Q3651-2/2 (E2, B2, C2) is turned on, and
the level of XPROTECT becomes low.
→ The microcomputer detects the XPROTECT level and shuts
the power to the unit off.
When FAN+ and FAN- are short-circuited, the electric potential at
Point A becomes higher than GND level by the addition of the
values at D3656 and D3657. As this value is lower than that at
D3658, Q3651 (E, C, B) is turned off, Q3651 (E2, B2, C2) is
turned on, and the level of XPROTECT becomes low.
QQ 3763 1515 0 89 2498 299
(3) When VD+5 is short-circuited
The level of the XPROTECT line becomes low. The
microcomputer detects the XPROTECT level and shuts the power
to the unit off.
2 -2 Short-circuit-detection circuit for the DVD power
supply (VP+8)
[Sub Woofer side]
C
6CH AMP Assy
XPROTECT
E
VD+5
VP+8
R108
27k
D104
1SS355
Q106
DTC124EUA
Q107
DTA124EUA
TUNER
As the TUNER line is fixed to GND level, Q107 is always on. If
the level at VP+8 falls to GND level because of short-circuit, etc.,
Q106 is turned on, and the level of the XPROTECT line becomes
low.
← The microcomputer detects the XPROTECT level and shuts
the power to the unit off.
www
F
.
x iao y u163. co m
XV-DV99
102
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
TEL 13942296513
(2) When VH-(VA-12) is short-circuited
As the electric potential of VE at Q102 (Q104) (E2, C2, B2)
becomes the same as that at VB, Q102 (Q104) (E2, C2, B2) is
turned off. Following this, Q101 (Q103) (E2, B2, C2) is turned
off, which changes the voltage at Points A and B to a value other
than 5 V. Therefore, Q101 (Q103) (E, C, B) then Q102 (Q104) (E,
C, B) are turned on, the level of XPROTECT becomes low.
Q3654
2SD2144S
QQ
QQ
(1) When VH+(VP+15) is short-circuited to GND
As the voltage at Point B becomes almost ground potential, and
Q101 (Q103) (E, C, B) then Q102 (Q104) (E, C, B) are turned on,
the level of XPROTECT becomes low.
→ The microcomputer detects the XPROTECT level and shuts
the power to the unit off.
D3655
1SS133
13942296513
13942296513
D
R108
27k
to
XPROTECT
C
(µ-com)
Q102_1/2
(Q104_1/2)
D101
(D102)
E
Q101_1/2
(Q103_1/2)
E2
[Sub Woofer side]
C
TEL
TEL
C
VH+
(VP+15)
VD+5
3 When the FAN connector is disconnected or
when rotation of the fan is interrupted
6
http://www.xiaoyu163.com
5
4 When DC is generated at the output because of
a failure in the AMP system, etc.
7
8
5 When abnormally high temperature is detected
by the thermistor
QQ 376315150 892498299
[Sub Woofer side]
D
POWER Assy
[Sub Woofer side]
C 6CH AMP
Assy
Front L ch
(SW, SL)
Front R ch
(C, SR)
+5V
TH111
NCP18WF104J03RB
to
XPROTECT
E
A
B
R3603
10k
+
C3632
100/10
XPROTECT
C
Q3605
R3358
(R3626)
(R3458)
10k
IC81
NJM7805FA
R108
27k
Q3606
[Sub Woofer side]
C 6CH AMP
Assy
VD+5
VD+5
R3357
(R3625)
(R3457)
18k
Q3604
R111
1k
Q3607
• In Normal mode, both Q3605 and Q3604 are off.
Q111
2SC4081
R112
1k
The voltage at Point A becomes the divided voltage of TH111
and R111//R112 (combined resistance of parallel-connected
resistors R111 and R112.) In Normal mode, the resistance at
TH111 is much higher than R111//R112, and Q111 is off. (Note
that the resistance at TH111 becomes lower as the temperature
increases.) If the solder temperature at IC81 increases abnormally,
the temperature at TH111 (thermistor) mounted closest to the land
of IC81 increases accordingly, and the resistance at TH111
decreases.
When the temperature at TH111 reaches 90-110_C (varying
according to conditions,) the voltage at Point (A) becomes high
enough to turn Q111 on, and the level of the XPROTECT line
becomes low. The microcomputer detects the XPROTECT level
and shuts the power to the unit off.
C
QQ
QQ
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
B
13942296513
13942296513
(2) When negative (-) DC voltage was generated at the SP
terminal
Q3604 is turned on, and XPROTECT is activated.
R113
220
TEL
TEL
(1) When positive (+) DC voltage is generated at the SP
terminal
When positive (+) DC voltage is generated at the L or R channel,
and VB of Q3605 becomes higher than that at the operation point,
Q3606 (E, C, B) is turned on, and the level of XPROTECT
becomes low.
→ The microcomputer detects the XPROTECT level and shuts
the power to the unit off.
A
5 -1 IC81 abnormal temperature detection circuit
D
E
www
.
x iao y u163. co m
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
103
8
1
3
http://www.xiaoyu163.com
2
4
Protection circuit that activates against a DVD PRTECT error
QQ 376315150 892498299
B
R929
10k
V+12
R923
47k
V+12
R925
0
R928
4.7k
Q921
Q923
Q924
R930
10k
R924
10k
D924
D923
D922
Q922
V+3R3
B
V+12
V+6
R922
470
R934
10k
R921
470
R5515
220
8
8
Q925
Q926
D921
UDZS4.7B
R5514
1M
C5580
0.01
C921
0.1
R931
47k
VDET
17
µcom
TEL
TEL
V+5 R933
15k
D926
D927
CONTROL Assy
CN5604
R927 V+5
47k
V+12
H
DVDM Assy
VPR+8
CN901
A
6 The DVDM monitors the voltage of the main power supply by VDET signals.
In Normal mode, the VDET signal is at the MID level (3.3 V). In the following conditions, the VDET signal level becomes L or H, and
the microcomputer is notified of this abnormality.
IC5501
PDC110B
Items to be detected by VDET
(1) When the power voltages inside the DVDM become abnormal, as shown in the table below
C
Status
Power
Voltage
Q921
D921
D922
Q926
Q925
off
off
off
off
off
off
off
off
Mid
(on)
(on)
(on)
(off)
off
on
off
off
L
off
off
off
off
off
off
on
on
L
<5.2V
−
off
off
off
off
−
on
on
L
>12.6V
on
−
on
on
on
−
off
off
H
<3V
−
−
−
−
−
−
on
on
L
TEL 13942296513
>15.5V
When an abnormality is generat
V+6
V+5
D
V+3R3
QQ 3763 1515 0 89 2498 299
<3.6V
−
off
off
off
off
−
on
on
L
>6.6V
−
on
on
on
on
−
off
off
H
<2.5V
−
−
−
−
−
−
−
−
L
>4.25V
−
−
−
−
(on)
−
−
−
H
(2) When the VDET signal to the microcomputer is interrupted because of defective soldering of the 30-pin connector or incomplete
insertion of FFC
→ The VDET level is lowered by the pull-down resistor (1 Mohms) on the side of the microcomputer.
E
www
F
.
x iao y u163. co m
XV-DV99
104
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
Q922
QQ
QQ
376315150 892498299
Q924
<1V
VPR+8
VDET voltage
Q923
In Normal mode
VDVD+12
Operation
13942296513
13942296513
D925
6
http://www.xiaoyu163.com
5
7
8
7.1.13 DISASSEMBLY
QQ 376315150 892498299
Note: For performing the diagnosis shown below, the following jig cable for service are required:
• GGD1222
A
This unit is a system component, so it does not operate independently.
Refer to section "7.1.11 SINGLE OPERATION METHOD" to work it independently.
1 Top panel, Top plate
1
2 VIDEO Assy
1
2
Remove the two screws.
Rear panel
1
1
Remove the top panel and top plate. (See Step ¥.)
Remove the eight screws.
2
VIDEO Assy
DSP Assy
B
TEL
TEL
2
13942296513
13942296513
2
Remove the top panel by removing the nine hooks.
2
Top panel
2
2
2
2
2
2
×3
2
Rear panel
2
2
3
Stand the VIDEO Assy.
3
VIDEO Assy
DSP Assy
Remove the top plate by removing the five screws.
3
Top plate
3
3
376315150 892498299
376315150 892498299
2
3
QQ
QQ
Q2 Q 3763 1515 0 89 2498 299
2
2
TEL 13942296513
C
D
3
3
E
3
www
.
x iao y u163. co m
Diagnosis
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
105
8
1
3
http://www.xiaoyu163.com
2
3 CONTROL Assy
A
4
4 DVDM Assy
QQ 376315150 892498299
1
2
1
2
3
4
Remove the top panel and top plate. (See Step ¥.)
Remove the ten screws.
2
2
×2
Remove the top panel and top plate. (See Step ¥.)
Remove the six screws.
Remove the three flexible cables.
Remove the DVD mechanism section with front section.
2
DVD mechanism
section
2
2 3
×2
B
2
4
TEL
TEL
2
3
3
2
2
2
C
2
2
Front section
2
Stand the CONTROL Assy.
CONTROL Assy
3
VIDEO Assy
DSP Assy
FM/AM TUNER
Module
QQ 3763 1515 0 89 2498 299
5
Remove the two screws.
TX TRADE
Assy
D
5
DVDM Assy
LOADING MECHA.
Assy
5
E
NOTE:
When this FFC cable is off from the connector and the power
is turned on, the parts below on the DVDM ASSY may be
destroyed. Be sure to take care when servicing.
Front section
IC851
DSD1791DBR
IC861, IC871 DSD1702EG
www
Bottom view
x iao y u163. co m
Diagnosis
F
.
XV-DV99
106
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
TEL 13942296513
QQ
QQ
3
2
13942296513
13942296513
Rear panel
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
6
7
8
9
Release the jumper wire.
Connect the jig cable.
A
Arrange the DVDM Assy as shown in the photo below.
Insert the insulation sheet.
DVDM Assy
7
LOADING MECHA. Assy
Jig cable
(GGD1222)
9
Insulation
Sheet
B
6
6
6
TEL
TEL
Rear view
DVDM Assy
PCB Location
TX TRADE Assy
QQ 3763 15C15 0 89H2498 299
VIDEO Assy
CONTROL Assy
DSP Assy
D
E
DSP TRADE
Assy
B
DVDM Assy
O KEY LTOP Assy
I
376315150 892498299
376315150 892498299
TEL 13942296513
FM/AM TUNER Module
C
QQ
QQ
F
G
13942296513
13942296513
LOADING MECHA.
Assy
Diagnosis
D
HP Assy
E
LOADING MECHA.
Assy
N
www
KEY L Assy
L
x iao y u163. co m
KEY RTOP Assy
.
M
KEY R Assy
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
107
8
1
2
3
http://www.xiaoyu163.com
4
5 Tray panel
A
QQ 376315150 892498299
Firstly remove the tray panel to remove the mecha. section.
In this section, explain a disassembly of the tray panel.
1
2
3
4
5
6
How to open the tray when the power cannot be on
Insert a screwdriver (small) into the slit located at the bottom of
the unit, and slide the projection of the drive gear in the
LOADING MECHA. Assy in the direction of the arrow, as
indicated in the photo. If the tray pops out a little, fully pull it out
by a hand.
Remove the top panel and top plate. (See Step ¥.)
Press the
STANDBY/ON button to turn on the power.
Press the 0 (OPEN/CLOSE) button to open the tray.
Remove the tray panel.
Press the 0 (OPEN/CLOSE) button to close the tray.
Press the
STANDBY/ON button to turn off the power.
Slit
B
TEL
TEL
2 6
C
3
5
3 5
Screwdriver (small)
Tray panel
QQ 3763 1515 0 89 2498 299
Screwdriver (small)
Projection
D
Drive gear
LOADING MECHA. Assy
E
www
F
.
x iao y u163. co m
XV-DV99
108
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
TEL 13942296513
Disassembly of after step 7, refer to "Step [ DVDM Assy" .
QQ
QQ
7
Tray
13942296513
13942296513
4
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
Removing the TRAVERSE MECHA. Assy-S and Pickup Assy-S
A
1 LOADING MECHA. Assy
1
2
3
Remove the bridge by removing the one screw.
Rear View
Pull out the tray, then remove it by pressing the hook.
Short-circuit two points of C and D by soldering.
Note: After replacement, connect the flexible cable,
then remove the soldered joint (open).
4
CD
Hook
Remove the four connectors from the LOADING
MECHA. Assy.
2
-1
3
1
B
-1
TEL
TEL
Bridge
-2
13942296513
13942296513
1
QQ
QQ
376315150 892498299
376315150 892498299
QQ 37623 1515 0 89 2498 299
TEL 13942296513
Tray
-2
Drive cam
Note when reinserting the Tray
C
Pin
When reinserting the Tray, first align the triangle
printed on the Loading base and the pin of the Drive
cam, then insert the Tray.
D
E
Front Side
Loading base
www
.
Triangle
x iao y u163. co m
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
109
8
1
2
3
http://www.xiaoyu163.com
4
2 TRAVERSE MECHA. Assy-S
QQ 376315150 892498299
1
A
Flexible cable
for the spindle motor
Dislodge the flexible cables from their packaged
placement.
Front Side
1
B
13942296513
13942296513
1
C
QQ 3763 1515 0 89 2498 299
Remove the four hooks.
Bottom View
TRAVERSE MECHA. Assy-S
2
Remove the TRAVERSE MECHA. Assy-S.
3
E
www
F
x iao y u163. co m
2
.
×2
XV-DV99
110
1
2
3
http://www.xiaoyu163.com
4
×2
376315150 892498299
376315150 892498299
2
3
Flexible cable
for the stepping motor
QQ
QQ
D
Flexible cable
for the pickup
TEL 13942296513
TEL
TEL
1
6
http://www.xiaoyu163.com
5
7
8
3 Pickup Assy-S
QQ 376315150 892498299
Front Side
Note: The Pickup Assy-S can be removed without
removing the TRAVERSE MECHA. Assy-S.
(shown as Step ø.)
1
Dislodge the flexible cable for the pickup from its
packaged placement.
2
Remove the flexible cable for the pickup.
A
1
B
TEL
TEL
2
13942296513
13942296513
1
Flexible cable for the pickup
3
4
Remove the two skew screws and two skew springs.
QQ 3763 1515 03 89 23498 299
Skew screw
Skew screw
Remove the Pickup Assy-S.
Pickup Assy-S
Skew spring
Skew spring
4
376315150 892498299
376315150 892498299
TEL 13942296513
QQ
QQ
Bottom View
C
D
E
www
.
x iao y u163. co m
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
111
8
1
5
A
3
http://www.xiaoyu163.com
2
4
QQ 376315150 892498299
Remove the two screws.
Pickup Assy-S
Note: The screws are secured with epoxy.
Make sure to apply epoxy after reattaching
the screws.
Leaf Spring
5
Joint Spring
Silicone Adhesive
GEM1037
B
TEL
TEL
5
Silicone Adhesive
GEM1037
C
Arrangement of the flexible cable
for the stepping motor
Front Side
: Conductive surface
Front Side
376315150 892498299
: Conductive surface
D
Hook
Hook
E
www
Bottom View
F
.
x iao y u163. co m
Bottom View
XV-DV99
112
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
QQ
QQ
Arrangement of the flexible cable
for the spindle motor
13942296513
13942296513
Joint 03
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
Arrangement of the flexible cable for the pickup
: Conductive surface
A
Note:
Be sure to move the Pickup Assy-S to the innermost perimeter.
1
Fold the flexible cable inward at the position of the reference
line.
2
3
Attach the flexible cable of the pickup to the connector.
7
Pass the flexible cable below the hook, and fold it back.
Make sure that the cable does not have any slack
Fold the flexible cable of the pickup with the backing inward.
7
Reference line
1
3
2
B
Hook
TEL
TEL
Backing
97mm ± 2mm
8
4
Fold the flexible cable back at the hook.
Pass the flexible cable through the hook not allowing
any slack.
Make sure that the cable is loose
Hook
5
6
Fold the flexible cable as indicated in the photo.
9
Hook the part folded in Step 1 to the hook.
5
Fold the flexible cable along the hook.
376315150 892498299
376315150 892498299
Reference line
Pass the cable below the hook
.
Reference
line
Hook
E
Hook
x iao y u163. co m
F
XV-DV99
5
D
6
9
www
C
QQ
QQ
QQ 3763 1515 0 89 24988299
TEL 13942296513
4
Hook
Make sure there is no slack in the cable
13942296513
13942296513
Bottom View
Front Side
6
http://www.xiaoyu163.com
7
113
8
1
2
3
http://www.xiaoyu163.com
4
7.2 IC
QQ 376315150 892498299
• The information shown in the list is basic information and may not correspond exactly to that shown in the schematic diagrams.
A
• List of IC
STM6316ATXXZ, STM5588CVB, M63108FP, SAA7893HL/C2, PDC110B
7 STM6316ATXXZ (DVDM ASSY : IC301)
• FRONT END IC
¶ Block Diagram
B
TEL
TEL
13942296513
13942296513
C
E
www
F
.
x iao y u163. co m
XV-DV99
114
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
D
QQ
QQ
QQ 3763 1515 0 89 2498 299
TEL 13942296513
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
A
¶ Pin Function
No.
1
PIN name
IREF
description
12.7kF
detail
Analog block reference part
2
GNDAI
GNDA
analog gnd
3
RFIN
capacitor
RF signal C association input to a demodulation block
4
RFOUT
capacitor
B1+B2+B3+B4 mixture listing from an analog block
5
VCCA18
1V8A
analog 1V8
6
A
B1
PU - B1 input
GNDMN
GNDA
analog gnd
B
B2
PU - B2 input
9
VCC33MN
10 REFD
3V3A
analog 3V3
to pick up
2V1 output for PU
1V8A
analog 1V8
B4
PU - B4 input
13 VCCA18IS
1V8A
analog 1V8
14 C
B3
PU - B3 input
3V3A
analog 3V3
GNDA
analog gnd
17 VCC33SD
3V3A
analog 3V3
18 VCC18SD
1V8A
analog 1V8
19 GNDSD
GNDA
analog gnd
C
PU-3 beam C input
A
PU-3 beam A input
22 VSHIELDIS
GNDA
analog gnd
23 VCC18ADC
1V8A
analog 1V8
TEL 13942296513
24 GNDADC
GNDA
analog gnd
25 VSHIELDADC
GNDA
analog gnd
26 VCC33DAC
3V3A
analog 3V3
27 GNDDAC
GNDA
analog gnd
28 SPINDLE
560ohm(st2)
DAC current listing for stepper drive
29 SLEDGE
560ohm(st1)
DAC current listing for stepper drive
30 REFEXT
20K1%
Reference for DAC
31 REFGND
refext
analog gnd
32 REFDAC
560ohm1%
DAC reference
33 FACT
560ohm1%
DAC current listing for focus
34 TACT
560ohm1%
DAC current listing for tracking
35 VCC18DAC
1V8A
analog 1V8
36 PC0
FG
FG pulse input
37 PC1
PS
Driver control signal
38 PC2
tray SW1(open)
SW input for tray OPEN position
39 PC3
SB
Driver control signal
40 PC4
SLD position
Inside SW input
www
.
x iao y u163. co m
6
http://www.xiaoyu163.com
D
E
F
XV-DV99
5
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
20 F
21 E
C
QQ
QQ
15 VCCA33IS
16 GNDAIS
13942296513
13942296513
11 VCC18MN
12 D
B
TEL
TEL
7
8
7
115
8
1
A
2
3
http://www.xiaoyu163.com
4
QQ 376315150 892498299
No.
PIN name
description
41 VSS
B
42 VDD33
3V3D
digital 3V3
43 PC5
780/X650
780nm/650nmLD change control signal
44 PC6
spinde PDM
Control PDM listing for spindle drive
45 PC7
opicgain
OEIC gain control signal
46 PD7
03PU/X02PU
Pull-up settlement
47 VSS
GNDD
digital gnd
48 VDD18
1V8D
digital 1V8
49 PD6
(debug)
test
50 PD5
(debug)
test
(DSPclk)
test
(DSPdata)
test
53 PD2
(DSPstrb1)
test
54 PD1
error monitor
Terminal for TRKG error monitor (30KHzLPF add need)
55 PD0
tray PDM drive
Control PDM signal for tray drive
56 VSS
GNDD
digital gnd
57 VDD33
3V3D
digital 3V3
RS_ERROR
BE DATA I/F
RS_ERR_EN
BE DATA I/F
GNDD
digital gnd
RS_BCLK
BE DATA I/F
62 VDD18
1V8D
digital 1V8
63 OUT_DVALID
RS_DVALID
BE DATA I/F
376315150 892498299
E
64 OUT_DATA
RS_DATA
BE DATA I/F
65 OUT_SYNC
RS_ECCBST
BE DATA I/F
66 PE5
SCL(DMA)
FE routine download input
67 PE4
SDA(DMA)
FE routine download input
68 PE3
SCL
BE command I/F
69 PE2
SDA
BE command I/F
70 PE1
tray SW2(close) SW input for tray CLOSE position
71 PE0
DXXINT
FE status propagation signal
72 VSS
GNDD
digital gnd
73 VDD33
3V3D
digital 3V3
74 PF1
10K-pullup
Built-in facility setting terminal
75 PF0
10K-pulldown
Built-in facility setting terminal
76 VSS
GNDD
digital gnd
77 VDD18
1V8D
digital 1V8
78 PG1
to EMULATOR
Built-in facility setting terminal
79 PG0
to EMULATOR
Built-in facility setting terminal
80 TEST
10K-pulldown
test
www
F
QQ 3763 1515 0 89 2498 299
.
x iao y u163. co m
XV-DV99
116
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
60 VSS
61 OUT_CLK
QQ
QQ
58 OUT_ERR
59 OUT_EVALID
13942296513
13942296513
51 PD4
52 PD3
TEL 13942296513
D
detail
digital gnd
TEL
TEL
C
GNDD
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
No.
PIN name
81 RESET_N
description
RESET
A
detail
RESET input
82 VSSADC
GNDA
analog gnd
83 VDD18ADC
1V8A
analog 1V8
84 GNDPLL
GNDA
analog gnd
85 PLLOFF
GNDA
analog gnd
86 FREOUT
20MXtal
SYSTEMCLK oscillating circuit
87 FREIN
20MXtal
SYSTEMCLK oscillating circuit
88 VCC18PLL
1V8A
analog 1V8
650nmLD
650nmLD driving signal
780nmLD
780nmLD driving signal
TEL
TEL
89 LD1
90 LD2
B
3V3A
digital 3V3
CD_VR/GND
Monitor diodes VR junction terminal for CD
93 LMD1
LMD/LMD1
Monitor voltage junction terminal
94 LMD2
DVD_VR/LMD2
Monitor diodes VR junction terminal for DVD
95 GNDL
GNDA
analog gnd
96 TST_PM
nc
tset
97 TST_SLICE
nc
test
98 TST_ADC
nc
test
SACD_IC
RF signal output
capacitor
Condenser junction terminal for inside reference stability
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
C
QQ
QQ
99 RFSACD
100 VBGFILT
13942296513
13942296513
91 VCCA33
92 TWSEL
D
E
www
.
x iao y u163. co m
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
117
8
1
2
3
http://www.xiaoyu163.com
4
7 STI5588CVB (DVDM ASSY : IC601)
QQ 376315150 892498299
• BACK END IC
A
B
TEL
STi5588
PQFP 208
(rev F)
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
DAC_PCMOUT1
DAC_PCMOUT2
DAC_PCMCLK
DAC_LRCLK
SPDIF_OUT
SMI_ADR[4]
SMI_ADR[5]
SMI_ADR[6]
SMI_ADR[7]
SMI_ADR[8]
SMI_ADR[9]
VDD1_8
VSS
SMI_ADR[3]
SMI_ADR[2]
SMI_ADR[1]
SMI_ADR[0]
SMI_ADR[10]
SMI_ADR[11]
SMI_ADR[12]
SMI_ADR[13]
SMI_CS[0]
SMI_CS[1]
SMI_RAS
SMI_CAS
SMI_WE
SMI_DQML
SMI_DQMU
VDD3_3
SMI_CLKIN
VSS
SMI_DATA[0]
SMI_DATA[1]
SMI_DATA[2]
SMI_DATA[3]
SMI_DATA[4]
SMI_DATA[5]
SMI_DATA[6]
SMI_DATA[7]
SMI_DATA[8]
SMI_DATA[9]
VDD1_8
SMI_CLKOUT
VSS
SMI_DATA[10]
SMI_DATA[11]
SMI_DATA[12]
SMI_DATA[13]
SMI_DATA[14]
SMI_DATA[15]
PIO5[3]
PIO5[4]
www
F
.
x iao y u163. co m
XV-DV99
118
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
E
QQ
QQ
CPU_DATA[13]
CPU_DATA[12]
CPU_DATA[11]
CPU_DATA[10]
CPU_DATA[9]
CPU_DATA[8]
VSS
VDD1_8
CPU_DATA[7]
CPU_DATA[6]
CPU_DATA[5]
CPU_DATA[4]
CPU_DATA[3]
CPU_DATA[2]
CPU_DATA[1]
CPU_DATA[0]
CPU_CAS1
CPU_CAS0
CPU_RAS1
VSS
VDD3_3
CPU_CE[0]
CPU_CE[1]
CPU_CE[2]
CPU_CE[3]
CPU_WAIT
CPU_RW
CPU_BE[1]
CPU_BE[0]
IRQ[0]
IRQ[1]
IRQ[2]
RESET
VSS_PLL
VDD_PLL
VSS
PIX_CLK
VDD1_8
CPU_PROCLK
CPU_OE
PWM0
PWM1
PWM2
TCK
TDI
TDO
TMS
TRST
VSS
VDD3_3
ADC_PCMCLK
PIO5[5]
QQ 3763 1515 0 89 2498 299
TEL 13942296513
D
156
155
154
153
152
151
150
149
148
147
146
145
144
143
142
141
140
139
138
137
136
135
134
133
132
131
130
129
128
127
126
125
124
123
122
121
120
119
118
117
116
115
114
113
112
111
110
109
108
107
106
105
13942296513
13942296513
C
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
TEL
PIO2[5]
PIO2[6]
PIO2[7]
VDD3_3
VSS
PIO3[0]
PIO3[1]
PIO3[2]
PIO3[3]
PIO3[4]
PIO3[5]
PIO3[6]
PIO3[7]
VDD1_8
VSS
B_DATA
B_BCLK
B_FLAG
B_SYNC
PIO5[0]
PIO5[1]
PIO5[2]
VDD_RGB
VSS_RGB
B_OUT
G_OUT
R_OUT
V_REF_RG
I_REF_RG
VDD_YCC
VSS_YCC
Y_OUT
C_OUT
CV_OUT
V_REF_YC
I_REF_YC
VDD1_8
VSS
PIO4[0]
PIO4[1]
PIO4[2]
PIO4[3]
PIO4[4]
PIO4[5]
PIO4[6]
PIO4[7]
VDD3_3
VDD_PCM
VSS_PCM
VSS
DAC_SCLK
DAC_PCMOUT0
208
207
206
205
204
203
202
201
200
199
198
197
196
195
194
193
192
191
190
189
188
187
186
185
184
183
182
181
180
179
178
177
176
175
174
173
172
171
170
169
168
167
166
165
164
163
162
161
160
159
158
157
PIO2[4]
PIO2[3]
PIO2[2]
PIO2[1]
PIO2[0]
TRIGGER_OUT
TRIGGER_IN
PIO1[5]
PIO1[4]
VSS
VDD1_8
PIO1[3]
PIO1[2]
PIO1[1]
PIO1[0]
PIO0[7]
PIO0[6]
PIO0[5]
PIO0[4]
PIO0[3]
PIO0[2]
PIO0[1]
PIO0[0]
VSS
VDD3_3
CPU_ADR[21]
CPU_ADR[20]
CPU_ADR[19]
CPU_ADR[18]
CPU_ADR[17]
CPU_ADR[16]
CPU_ADR[15]
CPU_ADR[14]
CPU_ADR[13]
CPU_ADR[12]
CPU_ADR[11]
VSS
VDD1_8
CPU_ADR[10]
CPU_ADR[9]
CPU_ADR[8]
CPU_ADR[7]
CPU_ADR[6]
CPU_ADR[5]
CPU_ADR[4]
CPU_ADR[3]
CPU_ADR[2]
CPU_ADR[1]
VSS
VDD3_3
CPU_DATA[15]
CPU_DATA[14]
¶ Pin Configuration
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
A
¶ Block Diagram
2 UARTs,
Internal peripherals
2
2 I C-SSCs,
IR transceiver
MAFE interface
Central
command port
CPU
(C2+)
Cache sub-system
RID
Low power
mode
Clock
generator
DMAs
ICache
Front-end &
link interface
block move
Refill
control
Diagnostic
controller
CPU arbiter
Programmable
CPU interface
Ext peripherals: (EMI)
flash, additional
DRAM SDRAM
ST20 arbiter and memory controller
SDRAM
block move
I/F
SDRAM arbiter (LMC)
OSD, SP
decoder
and mixing
Video
filtering
Video
decoder
Audio &
Karaoke
Audio
in/out
376315150 892498299
376315150 892498299
Shared
SDRAM
interface (SMI)
DENC
Command I/F
C
QQ
QQ
Analog/digital
Video output,
480i/480p
CD FIFOs
QQ 3763 1515 0 89 2498 299
TEL 13942296513
16, 32, 64 or
128-Mbit
SDRAM
JTAG
debugging
interface
13942296513
13942296513
Communications
arbiter
B
DCache
TEL
TEL
DMA
Debug
SRAM
MPEG
MPEG
DVD
TAP
D
E
www
.
x iao y u163. co m
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
119
8
1
A
2
3
http://www.xiaoyu163.com
4
QQ 376315150 892498299
¶ Pin Function
No.
1
B
Dir.
FP_SO
Pin Function
OUT
Front Panel / DAC interface.
Serial transfer data output.
Data output to SACD decoder
2
A_DATA3
OUT
3
VCLK
OUT
4
VDD_3V3
-
reserved
3.3 V Power supply
5
VSS
6
B_DATA
OUT
SACD data output to SACD decoder
7
B_BCLK
OUT
SACD bit clock output to SACD decoder
8
B_FLAG
Ground
OU T
SACD flag output to SACD decoder
OUT
It is not connected except 5 Disc Changer.
10
SQUEEZE
OUT
11
RTS
OUT
UART(RS-232C) Request To Send signal output.
OUT
Output signal for S-Video output S1/S2 control & EURO(SCART) connector (FUNCTION
SWITCHING) signal.
'H' : letter-box output mode.
IN
LETTER
13
CTS
14
VDD_1V8
-
15
VSS
-
16
IN
FE_DATA
IN
Output signal for S-Video output S1/S2 control.
'H' : squeeze output mode.
UART(RS-232C) Clear To Send signal input.
1.8 V Power supply
Ground
FE_BCLK
IN
Front-End L6316 stream interface.
Serial clock input.
18
FE_DVALID
IN
Front-End L6316 stream interface.
Data valid flag input.
19
FE_SYNC
IN
Front-End L6316 stream interface.
Serial synchronize flag input.
20
FE_EVALID
IN
Front-End L6316 stream interface.
Error valid flag for RS_split.
21
FE_ECCBST
IN
Front-End L6316 stream interface.
ECC block start flag for RS_split.
22
I/XP
376315150 892498299
TEL 13942296513
D
E
Output signal for a change of interlace/Progressive output for video driver.
'L' : progressive 'H' : interlace
23
VDD_RGB
-
RGB circuit 3.3 V Power supply
24
VSS_RGB
-
RGB circuit Ground
25
B_OUT
OUT
B / Cb
26
G_OUT
OUT
G/Y
27
R_OUT
OUT
28
VREF_RGB
IN
29
IREF_RGB
IN
30
VDD_YCC
-
YC circuit 3.3 V Power supply
-
YC circuit Ground
R / Cr
RGB DAC reference
RGB DAC current reference
31
VSS_YCC
32
Y_OUT
OUT
Y
33
C_OUT
OUT
C
34
CV_OUT
OUT
35
VREF_YCC
www
F
OUT
36
IREF_YCC
37
VDD_1V8
38
VSS
IN
x iao y u163. co m
IN
.
CV
YCC DAC reference
YCC DAC current reference
-
1.8 V Power supply
-
Ground
XV-DV99
120
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
QQ 3763 1515 0 89 2498 299
17
QQ
QQ
Front-End L6316 stream interface.
Serial data input.
13942296513
13942296513
TRYPOS
TEL
TEL
Only 5 Disc Changer.
Tray rotation pulse input.
CAPTURE_IN0 can be used.
9
12
C
Pin Name
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
No.
Pin Name
Dir.
A
Pin Function
It is not connected except 5 Disc Changer.
39
FE_XDRV_MUTE
40
FE_OPEN
OUT
OUT
IN
OUT
41
FE_CLOSE
IN
42
CLAMP
IN
43
XUNCLAMP
IN
OUT
DISC_SNS
45
XDRVMUTE2
OUT
46
TP-x
OUT
IN
VDD_3V3
-
It is not connected except 5 Disc Changer.
Only 5 Disc Changer.
Input signal for showing disc clamp position.
'H' : complete disc clamp position.
It is not connected except 5 Disc Changer.
Only 5 Disc Changer.
Input signal for showing disc un-clamp position.
'H' : complete disc clamp position.
It is not connected except 5 Disc Changer.
Only 5 Disc Changer.
Input signal for disc existing.
'L' : existing
reserved
reserved
QQ 3763 1515 0 89 2498 299
3.3 V Power supply
48
VDD_PCM
-
1.8 V Power supply
49
VSS_PCM
-
Ground
50
VSS
51
A_BCK
OUT
Ground
Audio DAC clock
52
A_DATA0
OUT
Audio DAC Front L,R data
53
A_DATA1
OUT
Audio DAC Center, LFE data
54
A_DATA2
OUT
Audio DAC Surround L, R data
55
A_MCLK
OUT
Audio DAC Master clock
56
A_LRCK
OUT
Audio DAC L/R clock
57
A_DOUT
OUT
S/PDIF(IEC60958) digital audio output.
OUT
SMI SDRAM Address
58
SMI_A4
59
SMI_A5
60
SMI_A6
61
SMI_A7
62
SMI_A8
63
SMI_A9
64
VDD_1V8
-
1.8 V Power supply
-
Ground
65
VSS
66
SMI_A3
67
SMI_A2
68
SMI_A1
69
SMI_A0
www
70
SMI_A10
71
SMI_A11
72
SMI_A12
73
SMI_A13
.
B
x iao y u163. co m
OUT
C
D
E
SMI SDRAM Address
F
XV-DV99
5
376315150 892498299
376315150 892498299
TEL 13942296513
47
Only 5 Disc Changer.
Input signal for tray position.
'H' : complete CLOSE position.
QQ
QQ
44
It is not connected except 5 Disc Changer.
13942296513
13942296513
OUT
It is not connected except 5 Disc Changer.
Only 5 Disc Changer.
Input signal for tray position.
'H' : complete OPEN position.
TEL
TEL
OUT
Only 5 Disc Changer.
Output signal for motor driver muting.
'L' : muting
6
http://www.xiaoyu163.com
7
121
8
1
A
2
3
http://www.xiaoyu163.com
4
QQ 376315150 892498299
No.
B
Pin Name
Pin Function
SMI_CS0
OUT
75
SMI_CS1
OUT
reserved
76
SMI_RAS
OUT
SMI SDRAM RAS 'L'
SMI SDRAM chip select 'L'.
77
SMI_CAS
OUT
SMI SDRAM CAS 'L'
78
SMI_WE
OUT
SMI SDRAM Write Enable 'L'
79
SMI_DQML
OUT
SMI SDRAM Lower DQM
'L': Lower select
80
SMI_DQMU
OUT
SMI SDRAM Upper DQM
'L': Upper select
81
VDD_3V3
82
SMI_CLKIN
SMI_D2
87
SMI_D3
88
SMI_D4
89
SMI_D5
90
SMI_D6
91
SMI_D7
92
SMI_D8
SMI_D9
94
VDD_1V8
95
SMI_CLKOUT
I/O
OUT
Ground
SMI SDRAM Data
1.8 V Power supply
SDRAM clock output.
D
E
VSS
SMI_D10
98
SMI_D11
99
SMI_D12
100
SMI_D13
I/O
Ground
QQ 3763 1515 0 89 2498 299
SMI SDRAM Data
101
SMI_D14
102
SMI_D15
103
TRACK_CROSS
OUT
104
DSD_XPCM
OUT
reserved
reserved
105
DAC_XRST
OUT
Reset signal of audio DAC.
'L': Reset
106
ADC_PCMCLK
OUT
reserved
107
VDD_3V3
-
3.3 V Power supply
108
VSS
-
Ground
109
XTRST
IN
Diagnostic Control Unit interface
110
TMS
IN
Diagnostic Control Unit interface
111
TDO
OUT
Diagnostic Control Unit interface
112
TDI
IN
Diagnostic Control Unit interface
113
TCK
IN
114
ROTDRV
115
BOOT_FROM_ROM
www
F
-
OUT
IN
Diagnostic Control Unit interface
Only 5 disc changer.
PWM output for tray rotation.
Boot select
'L' : Boot from DCU.
'H' : Boot form ROM.
x iao y u163. co m
116
LOAD_DRV
OUT
Only 5 disc changer.
PWM output for tray Open/Close drive.
117
CPU_OE
OUT
OE signal for 16M bits FLASH memory for firmware.
'L': enable
.
XV-DV99
122
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
TEL 13942296513
96
97
QQ
93
-
3.3 V Power supply
External SDRAM clock input.
13942296513
SMI_D1
QQ
85
13942296513
VSS
SMI_D0
IN
TEL
TEL
83
84
86
C
Dir.
74
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
No.
118
Pin Name
CPU_SDCK
119
VDD_1V8
120
PIXCLK
Dir.
OUT
-
IN
Pin Function
CLOCK for 64M bits SDRAM for debugging firmware.
1.8 V Power supply
Master 27MHz system clock input.
121
VSS
-
Ground
122
VDD_PLL
-
Clock PLL circuit 1.8 V Power supply
123
VSS_PLL
-
Clock PLL circuit Ground
Power ON system RESET signal.
'L': reset
124
XRESET
IN
125
SACD_IRQ
IN
Interrupt signal from SACD decoder
Front Panel interface.
Hand-shake input.
FP_XRDY
IN
127
FE_INT
IN
Interrupt input signal from Front-End L6316.
F_XWE, SD_DQML
OUT
129
SD_DQMU
OUT
Debug SDRAM/SRAM Upper DQM
'L':upper select
130
SD_RXW
OUT
Debug SDRAM Read/Write
'L':write, 'H':read
CPU_WAIT
IN
CE_FLASH
OUT
Flash memory Chip Enable 'L'.
133
CE_SACD
OUT
Licence signal from SACD decoder
134
CPU_CE1
OUT
reserved
OUT
Debug SDRAM RAS 'L'
Debug SRAM chip enable 'L'
SD_XRAS
QQ 3763 1515 0 89 2498 299
136
VDD_3V3
-
3.3 V Power supply
137
VSS
-
Ground
138
CPU_RAS1
OUT
reserved
139
SD_XCAS
OUT
Debug SDRAM CAS 'L'
140
SD_XCS
OUT
Debug SDRAM Chip Select 'L'
141
CPU_D0
142
CPU_D1
143
CPU_D2
144
CPU_D3
145
CPU_D4
146
CPU_D5
I/O
FLASH, Debug SDRAM/SRAM data
147
CPU_D6
148
CPU_D7
149
VDD_1V8
-
1.8 V Power supply
150
VSS
-
Ground
151
CPU_D8
152
CPU_D9
153
CPU_D10
154
CPU_D11
155
CPU_D12
156
CPU_D13
157
CPU_D14
158
CPU_D15
www
159
VDD_3V3
160
VSS
.
C
D
E
I/O
FLASH, Debug SDRAM/SRAM data
x iao y u163. co m
-
3.3 V Power supply
-
Ground
F
XV-DV99
5
376315150 892498299
376315150 892498299
TEL 13942296513
CPU wait 'H' input
QQ
QQ
131
132
13942296513
13942296513
128
Flash memory write enable.
Debug SDRAM/SRAM Lower DQM.
'L': enable, Lower select.
135
B
TEL
TEL
126
A
6
http://www.xiaoyu163.com
7
123
8
1
A
2
3
http://www.xiaoyu163.com
4
QQ 376315150 892498299
No.
B
CPU_A1
162
CPU_A2
163
CPU_A3
164
CPU_A4
165
CPU_A5
166
CPU_A6
167
CPU_A7
168
CPU_A8
169
CPU_A9
170
CPU_A10
Dir.
OUT
Pin Function
FLASH, Debug SDRAM/SRAM Address
171
VDD_1V8
-
1.8 V Power supply
172
VSS
-
Ground
CPU_A11
CPU_A12
175
CPU_A13
176
CPU_A14
177
CPU_A15
178
CPU_A16
179
CPU_A17
180
CPU_A18
CPU_A19
182
CPU_A20
183
CPU_A21
FLASH, Debug SDRAM/SRAM Address
376315150 892498299
D
E
VDD_3V3
3.3 V Power supply
-
Ground
OUT
reserved
QQ 3763 1515 0 89 2498 299
185
VSS
186
XEXPE
187
FE_ERROR
188
VSEL1
OUT
EURO(SCART) connector (BLINKING) output signal
'L' : RGB output disable
'H' : RGB output enable
189
VSEL2
OUT
EURO(SCART) connector V/Y, R/C signal.
'L' : VRGB output = YCGB
'H' : VRGB output = VRGB
190
FE_RST
OUT
Front-End L6316.
Hardware reset output.
'L' : reset
191
SACD_XRST
OUT
Reset signal of SACD decoder.
'L' : reset
IN
Front-End L6316 stream interface.
ECC Error flag
192
XMMUTE
OUT
Output for tone quality enhancement
193
B_SYNC
OUT
Sector synchronization output to SACD decoder
194
SDA
I/O
Front-End L6316 command interface
I2C bus serial data line.
195
SCL
OUT
Front-End L6316 command interface
I2C bus serial clock line.
196
B_WCLK
OUT
Word clock output to SACD decoder
197
TXD
OUT
UART(RS-232C) data output
198
VDD_1V8
199
VSS
200
RXD
www
F
-
1.8 V Power supply
-
x iao y u163. co m
IN
.
Ground
UART(RS-232C) data input
XV-DV99
124
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
TEL 13942296513
184
QQ
QQ
181
OUT
13942296513
13942296513
173
174
TEL
TEL
C
Pin Name
161
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
No.
201
Pin Name
XAMUTE
Dir.
OUT
Pin Function
Output signal for analog audio output line muting.
'L' : muting
202
TRIGIN
IN
Diagnostic Control Unit interface
203
TRIGOUT
OUT
Diagnostic Control Unit interface
204
DAC_XCS0
OUT
Chip enable for audio DAC serial control.
'L' : enable
205
DAC_XCS1
OUT
Use of serial control of 5.1ch audio DAC is possible.
'L' : enable
206
FP_ACK
OUT
Front Panel / DAC interface.
Hand-shake (acknowledge) output 'H'.
OUT
Front Panel / DAC interface.
Serial transfer clock output.
FP_SCK
208
FP_SI
IN
B
TEL
TEL
207
A
Front Panel interface.
Serial transfer data input.
13942296513
13942296513
QQ
QQ
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
C
D
E
www
.
x iao y u163. co m
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
125
8
1
2
3
http://www.xiaoyu163.com
4
7 M63018FP (DVDM ASSY : IC101)
QQ 376315150 892498299
• FTS Driver IC
A
¶ Pin Arrangement
B
TEL
TEL
13942296513
13942296513
C
376315150 892498299
D
E
www
F
.
x iao y u163. co m
XV-DV99
126
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
QQ
QQ
¶ Block Diagram
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
A
¶ Pin Function
B
TEL
TEL
13942296513
13942296513
QQ
QQ
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
C
D
E
www
.
x iao y u163. co m
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
127
8
1
3
http://www.xiaoyu163.com
2
4
7 SAA7893HL/C2 (DVDM ASSY : IC801)
A
QQ 376315150 892498299
• SACD Decoder IC
¶ Block Diagram
to host
host_sel
HF
AGC
B
FRONTEND
INTERFACE
ADC
HOST
INTERFACE
MEMORY
MANAGER
PSP-KEY
DECODER
key
control
SAA7893HL
PI-bus
DECRYPTION/
SECTOR
PROCESSOR
8-CHANNEL
DSD2PCM
CONVERSION
DEMUX
2, 5 or 6-channel
LOSSLESS
DECODER
SPEAKER SETUP
VOLUME CONTROL
DELAY
SWITCH
MATRIX
to
DSD/PCM
DAC
SDRAM
INTERFACE
C
to 64 Mbit
SDRAM
sys_clk
27-35 MHz
aud_clk
256/384/512/768*fs
external PCM
E
www
F
.
x iao y u163. co m
XV-DV99
128
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
D
QQ
QQ
QQ 3763 1515 0 89 2498 299
TEL 13942296513
13942296513
13942296513
SACD
AUDIO
INTERFACE
PI-BUS
CONTROL
TEL
TEL
data-bus
REGISTER
HOST
INTERFACE
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
102 D_DQ[13]
2
101 D_DQ[2]
H_DQ[14]
3
100 D_DQ[12]
GND_IO1
4
99 GND_IO5
H_DQ[13]
5
98 D_DQ[3]
H_DQ[12]
6
97 D_DQ[11]
H_DQ[11]
7
96 D_DQ[4]
H_DQ[10]
8
95 D_DQ[10]
H_DQ[9]
9
94 D_DQ[9]
VCC_IO1 10
93 D_DQ[6]
H_DQ[8] 11
92 VCC_IO4
H_DQ[7] 12
91 D_DQ[8]
H_DQ[6] 13
90 D_DQ[7]
H_DQ[5] 14
89 D_LDQM
H_DQ[4] 15
88 D_UDQM
H_DQ[3] 16
87 D_DQ[5]
86 D_clk
GND_IO2 17
85 VCC_Core2
H_procclock 18
81 D_RASn
80 D_Wen
H_DQ[1] 23
H_CSn 24
79 D_ADDR[11]
H_DQ[0] 25
78 D_ADDR[12]
H_RWn 26
77 D_ADDR[9]
H_WAIT 27
76 VCC_IO3
H_IRQn 28
75 D_ADDR[13]
aud_clk 29
74 D_ADDR[8]
PCM_dclk_in 30
73 D_ADDR[10]
PCM_wclk_in 31
72 D_ADDR[7]
VDDA 32
VSSA 33
71 D_ADDR[0]
biasin 34
69 GND_IO3
70 D_ADDR[6]
.
E
x iao y u163. co m
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
D
D_ADDR[3] 64
H_sel[1] 63
H_sel[0] 62
TCK 61
TDI 60
TDO 59
VCC_IO2 58
TMS 57
TRST 56
Be_dat(7) 55
Be_dat(6) 54
Be_dat(5) 53
Be_dat(4) 52
Be_dat(3) 51
Be_dat(2) 50
Be_dat(1) 49
Data_req 48
UDE_req 47
B_BCLK/SDCLK 46
B_WCLK/SENB 44
B_DATA/Be_dat(0) 45
www
B_SYNC/Sync 43
65 D_ADDR[4]
B_FLAG/SERR 42
66 D_ADDR[2]
GND_IO7 38
PCM_LsRs_in 41
67 D_ADDR[5]
VCC_IO7 37
PCM_LeRi_in 40
68 D_ADDR[1]
Adcrefl 36
PCM_CeLf_in 39
Agcinp 35
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
H_DQ[2] 22
QQ
QQ
83 GND_IO4
82 D_CASn
sys_clk 21
C
84 GND_Core2
SAA7893HL
GND_Core1 20
B
13942296513
13942296513
1
TEL
TEL
H_A[1]
H_DQ[15]
VCC_Core1 19
A
103 D_DQ[1]
104 D_DQ[14]
105 D_DQ[0]
106 VCC_IO5
107 D_DQ[15]
108 DSD_PCM_0
109 DSD_PCM_1
110 DSD_PCM_2
111 DSD_PCM_3
112 GND_IO6
113 DSD_PCM_4
114 DSD_PCM_5
115 DSD_PCM_6
116 DSD_PCM_7
117 DSD_PCM_8
118 VCC_IO6
119 DSD_PCM_10
120 DSD_PCM_9
121 DSD_PCM_11
122 RESETn
123 H_A_sel
124 H_A[6]
125 H_A[5]
126 H_A[4]
127 H_A[3]
128 H_A[2]
¶ Pin Layout
129
8
1
2
3
http://www.xiaoyu163.com
4
QQ 376315150 892498299
¶ Pin Function
A
Pin
Type[1]
Description
H_A[1]
1
IN
address bus
H_DQ[15]
2
I/O10
data bus
H_DQ[14]
3
I/O10
data bus
GND_IO1
4
GND_IO
GND I/O pads
H_DQ[13]
5
I/O10
data bus
H_DQ[12]
6
I/O10
data bus
H_DQ[11]
7
I/O10
data bus
H_DQ[10]
8
I/O10
data bus
H_DQ[9]
9
I/O10
data bus
TEL
VCC_IO1
10
VCC_IO
VCC I/O pads
H_DQ[8]
11
I/O10
data bus
12
I/O10
data bus
H_DQ[6]
13
I/O10
data bus
H_DQ[5]
14
I/O10
data bus
H_DQ[4]
15
I/O10
data bus
H_DQ[3]
16
I/O10
data bus
B
TEL
Symbol
17
GND_IO
GND I/O pads
H_procclock
18
IN
host processor EMI interface clock
QQ
VCC_Core1
19
VCC_core
core supply voltage
D
E
GND_core core ground
sys_clk
21
IN
system clock
H_DQ[2]
22
I/O10
data bus
H_DQ[1]
23
I/O10
data bus
H_CSn
24
IN
host chip select; active LOW
H_DQ[0]
25
I/O10
data bus
H_RWn
26
IN
read = 1; write = 0
H_WAIT
27
O10
wait signal
H_IRQn
28
O10
interrupt request; active LOW
aud_clk
29
IN
DSD audio clock
PCM_dclk_in
30
IN
PCM data clock
PCM_wclk_in
31
IN
PCM word clock
VDDA
32
VDDCO
VDD of ADC
VSSA
33
VSSCO
VSS of AGC and ADC; connected to substrate
biasin
34
APIO
bias current input
Agcinp
35
APIO
AGC positive input signal; HF in
Adcrefl
36
APIO
ADC decoupling
VCC_IO7
37
VCC_IO
VCC I/O pads
GND_IO7
38
GND_IO
GND I/O pads
PCM_CeLf_in
www
F
QQ 3763 1515 0 89 2498 299
20
.
x iao y u163. co m
39
IN
PCM data center or LFE
XV-DV99
130
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
TEL 13942296513
GND_Core1
QQ
GND_IO2
C
13942296513
13942296513
H_DQ[7]
6
http://www.xiaoyu163.com
5
7
8
Type[1]
Description
PCM_LeRi_in
40
IN
PCM data left or right
PCM_LsRs_in
41
IN
PCM data left or right surround
B_FLAG/SERR
42
IN
I2S-bus flag (EDC flag)
B_SYNC/Sync
43
IN
sector sync or absolute time sync
B_WCLK/SENB
44
IN
I2S-bus word clock or UDE data sense from
host
B_DATA/Be_dat(0)
45
IN
I2S-bus data or LSB data of parallel interface
B_BCLK/SDCLK
46
IN
I2S-bus bit clock
UDE_req
47
IN
host request data from front-end; routed via
the SAA7893HL
Data_req
48
O10
data request for UDE
Be_dat(1)
49
IN
front-end parallel data interface
Be_dat(2)
50
IN
front-end parallel data interface
Be_dat(3)
51
IN
front-end parallel data interface
Be_dat(4)
52
IN
front-end parallel data interface
Be_dat(5)
53
IN
front-end parallel data interface
Be_dat(6)
54
IN
front-end parallel data interface
Be_dat(7)
55
IN
front-end parallel data interface
TRST
56
IN1
boundary scan reset
QQ
TMS
57
IN1
boundary scan mode select
58
VCC_IO
VCC I/O pads
59
O10
output
TDI
60
IN1
boundary scan data input
TCK
61
IN
boundary scan clock
H_sel[0]
62
IN
host select signals: SAD16, MAD16 and
SAD08
H_sel[1]
63
IN
host select signals: SAD16, MAD16 and
SAD08
D_ADDR[3]
64
O10
SDRAM address bus
D_ADDR[4]
65
O10
SDRAM address bus
D_ADDR[2]
66
O10
SDRAM address bus
D_ADDR[5]
67
O10
SDRAM address bus
D_ADDR[1]
68
O10
SDRAM address bus
GND_IO3
69
GND_IO
GND I/O pads
D_ADDR[6]
70
O10
SDRAM address bus
D_ADDR[0]
71
O10
SDRAM address bus
D_ADDR[7]
72
O10
SDRAM address bus
D_ADDR[10]
73
O10
SDRAM address bus
D_ADDR[8]
74
O10
SDRAM address bus
D_ADDR[13]
75
O10
SDRAM address bus
VCC_IO3
76
VCC_IO
VCC I/O pads
D_ADDR[9]
77
O10
SDRAM address bus
x iao y u163. co m
6
http://www.xiaoyu163.com
7
D
E
F
XV-DV99
5
376315150 892498299
VCC_IO2
TDO
C
QQ
.
13942296513
376315150 892498299
www
B
QQ 3763 1515 0 89 2498 299
TEL 13942296513
A
TEL
TEL
Pin
13942296513
QQ 376315150 892498299
Symbol
131
8
1
A
2
3
http://www.xiaoyu163.com
4
QQ 376315150 892498299
B
Pin
Type[1]
Description
D_ADDR[12]
78
O10
SDRAM address bus
D_ADDR[11]
79
O10
SDRAM address bus
D_Wen
80
O10
read or write
D_RASn
81
O10
row address select; active LOW
D_CASn
82
O10
column address select; active LOW
GND_IO4
83
GND_IO
GND I/O pads
GND_Core2
84
GND_core core ground
VCC_Core2
85
VCC_core
core supply voltage
D_clk
86
O10
clock signal needed for SDRAM
87
I/O10
data bus
D_UDQM
88
O10
DQ mask enable (upper)
D_LDQM
89
O10
DQ mask enable (lower)
D_DQ[7]
90
I/O10
data bus
D_DQ[8]
91
I/O10
data bus
VCC_IO4
92
VCC_IO
VCC I/O pads
D_DQ[6]
93
I/O10
data bus
D_DQ[9]
94
I/O10
data bus
I/O10
data bus
96
I/O10
data bus
D_DQ[11]
97
I/O10
D_DQ[3]
98
I/O10
GND_IO5
99
GND_IO
QQ 3763 1515 0 89 2498 299
D_DQ[12]
100
I/O10
data bus
D_DQ[2]
101
I/O10
data bus
D_DQ[13]
102
I/O10
data bus
D_DQ[1]
103
I/O10
data bus
D_DQ[14]
104
I/O10
data bus
D_DQ[0]
105
I/O10
data bus
VCC_IO5
106
VCC_IO
VCC I/O pads
D_DQ[15]
107
I/O10
data bus
DSD_PCM_0
108
O10
6-channel data output
DSD_PCM_1
109
O10
6-channel data output
DSD_PCM_2
110
O10
6-channel data output
376315150 892498299
E
data bus
GND I/O pads
DSD_PCM_3
111
O10
6-channel data output
GND_IO6
112
GND_IO
GND I/O pads
DSD_PCM_4
113
O10
6-channel data output
DSD_PCM_5
114
O10
6-channel data output
DSD_PCM_6
115
O10
6-channel clock/control
DSD_PCM_7
116
O10
6-channel clock/control
DSD_PCM_8
117
O10
2-channel clock/control
VCC_IO6
118
VCC_IO
VCC I/O pads
www
F
data bus
.
x iao y u163. co m
XV-DV99
132
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
95
D_DQ[4]
QQ
QQ
D_DQ[10]
TEL 13942296513
D
13942296513
13942296513
D_DQ[5]
TEL
TEL
C
Symbol
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
Symbol
Pin
Type[1]
Description
DSD_PCM_10
119
O10
2-channel data output
DSD_PCM_9
120
O10
2-channel clock or control
121
O10
2-channel data output
RESETn
122
IN
asynchronous reset; active LOW
H_A_sel
123
IN
address select
H_A[6]
124
IN
address bus
H_A[5]
125
IN
address bus
H_A[4]
126
IN
address bus
H_A[3]
127
IN
address bus
H_A[2]
128
IN
address bus
[1]
B
TEL
TEL
DSD_PCM_11
13942296513
13942296513
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
C
QQ
QQ
Explanation of input and output ports:
IN: digital input port; all dedicated inputs are TTL tolerant.
IN1: digital input port with internal pull-up resistor.
I/O10: bidirectional port with 10 ns slew rate.
O10: 3-state (in test mode) output port with 10 ns slew rate.
APIO: analog input port.
VDDCO: analog VDD port (1.8 V).
VSSCO: analog VSS port.
GND_IO: ground for I/O pads.
VCC_IO: VCC for I/O pads (3.3 V).
GND_core: ground for core.
VCC_core: VCC for core (1.8 V).
TEL 13942296513
A
D
E
www
.
x iao y u163. co m
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
133
8
1
A
2
3
http://www.xiaoyu163.com
4
QQ 376315150 892498299
PDC110B (CONTROL ASSY : IC5501)
• System Control Microcomputer
Pin Functions
No.
B
2
PA4/RD#
3
PA5/RS
4
P70 / INT0 / T0LCP / AN8
I/O
Function
O
Control power supply for DVD module
HPDET
I
Detect to insert headphone
NC
O
NC
ACPULSE
I
AC PULSE input (Interruption)
5
P71 / INT1 / T0HCP / AN9
NC
6
P72 / INT2 / T0IN
RDSCLK
O
7
P73 / INT3 / T0IN
REMOCON
I
REMOCON signal input (Interruption)
8
RES#
XRESET
I
µ-com reset input
I (O)
NC
Clock input from RDS decoder (without RDS : Low output)
XT1 / AN10
XT1
−
(When this port don't use , please connect VDD)
XT2 / AN11
XT2
−
(When this port don't use , please set open)
11
VSS1
VSS1
−
GND
12
CF1
CF1
−
for OSC
13
CF2
CF2
−
for OSC
14
VDD1
VDD1
−
VDD
15
P80 / AN0
SIMUKE
I
Destination distinction input
16
P81 / AN1
MODEL
I
model distinction input
17
P82 / AN2
VDET
I
DVD 3.3V detection input
18
P83 / AN3
KEY1
I
Key1 input
19
P84 / AN4
NC
O
20
P85 / AN5
NC
O
NC
NC
P86 / AN6
ST/TUNE
I
STEREO tuned detection input
P87 / AN7
XPROTECT
I
Protection and Fan Error detection input
21
22
TEL 13942296513
QQ 3763 1515 0 89 2498 299
23
P10/SO0
SDATA
O
System bus data output (AMP side output)
24
P11 / SI0 / SB0
MDATA
I
System bus data input (AMP side input)
25
P12 / SCK0
SCLK
I
System bus clock input
26
P13 / SO1
DSPDI
O
Data output to DSP (MOTOROLA) and DIR
27
P14 / SI1 / SB1
DSPDO
I
Data input from DSP (MOTOROLA)
28
P15 / SCK1
DSPCK
O
Clock output to DSP (MOTOROLA) and DIR
29
P16/T1PWML
SYSCS2
O
Chip select 2 for system bus
30
P17/T1PWMH/BUZ
SYSCS1
O
Chip select 1 for system bus
31
PE0
XHPMUTE
O
HP MUTE ON/OFF
32
PE1
XRECMUTE
O
REC OUTPUT MUTE ON/OFF
33
PE2
NC
O
NC
34
PE3
NC
O
NC
35
PE4
NC
O
NC
36
PE5
NC
O
NC
37
PE6
TIMERLED
O
Control TIMER LED
38
PE7
(LEVELSHIFT)
O
VOL 0 to 5 : H (standby)
39
VSS4
VSS4
−
GND
40
VDD4
VDD4
−
VDD
www
F
.
x iao y u163. co m
XV-DV99
134
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
9
10
QQ
QQ
E
DVDON/OFF
13942296513
13942296513
D
Pin Name
PA3/WR#
TEL
TEL
C
Mark
1
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
No.
Mark
Pin Name
I/O
Function
ATT10dB
O
Control ATT 10dB
42
PF1
ATT6dB
O
Control ATT 6dB
43
PF2
STEST
I
Set SERVICE TEST MODE for Service
44
PF3
UTEST
I
Set UNIT CHECK for checker
45
PF4
DTSDMIX
O
Cntrol of gain-up for dts down-mix
46
PF5
SWFMIX
O
Control for subwoofer mix
47
PF6
DIMSEL1
O
DIMMER SELECT1
48
PF7
DIMSEL2
O
DIMMER SELECT2
49
SI2P0/SO2
LCDDAT
O
Data for LCD driver
50
SI2P1/SI2/SB2
LCDCS
O
Chip enable for LCD driver
51
SI2P2/SCK2
LCDCLK
O
Clock for LCD driver
52
SI2P3/SCK20
(XLCDRST)
O
Reset for LCD driver (standby)
53
PWM1
NC
54
PWM0
NC
55
VDD2
VDD2
–
VDD
GND
B
NC
NC
VSS2
P00
TXCE
O
Chip enable for tuner LSI
58
P01
NC
O
NC
59
P02
DIGSEL
O
SW for Digital 1/2 select
60
P03
WVOLCE
O
Chip enable for woreless-vol IC
61
P04
TXCLK
O
Clock for tuner LSI
62
P05
TXODATA
O
Data for tuner LSI
63
P06
TXMUTE
O
Control mute of tuner
64
P07
RDSPOW
O
Control power supply of RDS (L : POWER ON)
65
P20/INT4/T1IN
RDSDATA
I (O)
66
P21/INT4/T1IN
TXIDATA
I
67
P22/INT4/T1IN
DVDACK
68
P23/INT4/T1IN
XVMUTE
69
P24/INT5/T1IN
DVDMUTE
I
Request of MUTE from DVD MODULE (Interruption)
70
P25/INT5/T1IN
AUDIOSELA
O
SW for Audio in DVD-A and SA-CD
71
P26/INT5/T1IN
INPUTSELC
O
AUDIO INPUT SELECT C (or TV AUDIO INPUT SELECT)
72
P27/INT5/T1IN
XWMUTE
O
WIRE LESS MUTE request
73
P30
WSELA
O
WIRE LESS OUTPUT SELECT A
74
P31
INPUTSELB
O
AUDIO INPUT SELECT B
75
P32
INPUTSELA
O
AUDIO INPUT SELECT A
76
P33
XTL0
O
Selection X'tal to DIR
77
P34
DIRERR
I
LOCK/UNLOCK from DIR
78
P35
DIRRST
O
Reset to DIR
79
P36
DIRCS
O
Chip select to DIR
80
PB7/D7
DIRDO
I
Data input from DIR
QQ 3763 1515 0 89 2498 299
Input RDS data
Input data from tuner LSI
I
Ackknowlegement from DVD MODULE (Interruption)
O
VIDEO MUTE request to DVD MODULE
376315150 892498299
376315150 892498299
VSS2
57
C
QQ
QQ
56
–
TEL 13942296513
A
13942296513
13942296513
PF0
TEL
TEL
41
D
E
www
.
x iao y u163. co m
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
135
8
1
B
Mark
Pin Name
I/O
Function
81
PB6/D6
DSPMODE
O
MODE selection (ROM/RAM) to DSP (MOTOROLA)
82
PB5/D5
DSPHREQ
I
Error detection from DSP (MOTOROLA)
83
PB4/D4
HPVOLCE
O
Chip enable for HP-vol IC
84
PB3/D3
DSPSS
O
Slave selection to DSP (MOTOROLA)
85
PB2/D2
XDSPRST
O
RESET to DSP (MOTOROLA) MODULE
86
PB1/D1
DECMUTE
I
Detection of 1st DSP boot success from DSP MODULE
87
PB0/D0
XDSPMUTE
O
MUTE requeat to DSP MODULE
88
VSS3
VSS3
−
GND
89
VDD3
VDD3
−
VDD
90
PC7/A7
DVDA6dBATT
O
ATTENUATION(6dB) operating Bass/Treble at DVD-AUDIO
91
PC6/A6
SYSPOW
O
Control power supply of system
92
PC5/A5
XTVMUTE
O
Control muting of TV (EURO)
93
PC4/A4
XDVDRST
O
RESET to DVD MODULE
94
PC3/A3
XSYSMUTE
O
Control mute of system
95
PC2/A2
VOLCE
O
Chip enable for E-vol IC
96
PC1/A1
VOLCLK
O
Clock for E-vol IC / HP-vol IC / Wireless-vol IC
97
PC0/A0
VOLDATA
O
Data for E-vol IC / HP-vol IC / Wireless-vol IC
98
PA0/CS2#
FLASHE/D
−
for FLASH writing
99
PA1/CS1#
FLASHDO
−
for FLASH writing
FLASHCLK
−
for FLASH writing
100 PA2/CS0#
E
www
F
.
x iao y u163. co m
XV-DV99
136
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
QQ
QQ
• Port0 (P00-P07) can be selected for input or output by each 4 bits (P00-P03,P04-P07). Set for input when reset. And it can be set C-MOS or
Nch-OD by each 1 bit in option.
• Port1 (P10-P17) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1bit
in option.
• Port2 (P20-P27) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1 bit
in option.
• Port3 (P30-P36) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1 bit
in option.
• Port7 (P70-P73) can be selected for input or output by each 1 bit. Set for input when reset.
• Port8 (P80-P87) can be selected for input or output by each 1 bit. Set for input when reset.
• PortA (PA0-PA5) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1
bit
in option.
• PortB (PB0-PB7) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1
bit in option.
• PortC (PC0-PC7) can be selected for input or output by each 1 bit. Set for input when reset. And it can be set C-MOS or Nch-OD by each 1
bit in option.
• PortE and PortF can be selected for input or output by each 2 bits.
13942296513
13942296513
D
4
TEL
TEL
C
3
http://www.xiaoyu163.com
QQ 376315150 892498299
No.
A
2
6
http://www.xiaoyu163.com
5
7
8
7.3 DISC/CONTENT FORMAT
QQ 376315150 892498299
Disc / content format
playback compatibility
General disc compatibility
This player was designed and engineered to
be compatible with software bearing one or
more of the following logos:
DVD-R
DVD-RW
CD-R/RW compatibility
• This unit will play CD-R and CD-RW discs
recorded in CD Audio or Video CD/Super
VCD format, or as a CD-ROM containing
MP3 or JPEG files. However, any other
content may cause the disc not to play, or
create noise/distortion in the output.
Audio CD
Video CD
CD-RW
Super Audio CD
• Unfinalized CD-R/RW discs recorded as
CD Audio can be played, but the full Table
of Contents (playing time, etc.) will not be
displayed.
TEL 13942296513
have been finalized using a DVD-recorder.
• This unit will play DVD-RW discs recorded
using the Video Recording (VR) format.
Fujicolor CD
* DV-667A only
• DVD-RW shows in the display when a VR
format DVD-RW disc is loading.
• KODAK Picture CD
•
is a trademark of Fuji Photo Film Co.
Ltd.
Other formats, including but not limited to the
following, are not playable in this player:
DVD-RAM / DVD-ROM / CD-ROM*
* Except those that contain MP3 or JPEG.
See also “Compressed audio compatibility
”
and “JPEG file compatibility” below.
DVD-R/RW and CD-R/RW discs (Audio CDs
and Video CD/Super VCDs) recorded using a
DVD recorder, CD recorder or personal
computer may not be playable on this unit.
This may be caused by a number of possibili-
www
.
• When playing a VR format DVD-RW discs
that was edited on a DVD recorder, the
screen may go momentarily black at
edited points and/or you may see scenes
from immediately before the edited point.
• This unit cannot record DVD-R/RW discs.
x iao y u163. co m
6
D
E
• Unfinalized DVD-R/RW discs cannot be
played in this player.
F
XV-DV99
5
376315150 892498299
376315150 892498299
63 1unit5will
15play
0 DVD-R/RW
89 249discs
8 299
QQ 3•7This
recorded using the DVD-Video format that
DVD-R/RW compatibility
C
QQ
QQ
Super VCD*
CD-R
13942296513
13942296513
• This unit cannot record CD-R or CD-RW
discs.
B
TEL
TEL
DVD-Audio DVD-Video
A
ties, including but not limited to: the type of
disc used; the type of recording; damage, dirt
or condensation on either the disc or the
player’s pick-up lens. See below for notes
about particular software and formats.
http://www.xiaoyu163.com
7
137
8
1
2
3
http://www.xiaoyu163.com
QQ 376315150 892498299
PC-created disc compatibility
A
4
• When naming MP3 files, add the corresponding file name extension (.mp3).
Files are played according to the file
extension. To prevent noise and malfunctions, do not use these extensions for
other kinds of files.
• If you record a disc using a personal
computer, even if it is recorded in a
“compatible format” as listed above, there
will be cases in which the disc may not be
playable in this machine due to the
setting of the application software used to
create the disc. In these particular
instances, check with the software
publisher for more detailed information.
• Check the DVD-R/RW or CD-R/RW software disc boxes for additional compatibility information.
B
13942296513
C
QQ
QQ 3763 1515 0 89 2498 299
TEL 13942296513
376315150 892498299
• Fixed bit-rate MP3 files are recommended. Variable bit-rate (VBR) MP3 files
are playable, but playing time may not be
shown correctly..
JPEG file compatibility
• The CD-ROM used to compile your MP3
files must be ISO 9660 Level 1 or 2
compliant. CD physical format: Mode1,
Mode2 XA Form1. Romeo and Joliet file
systems are both compatible with this
player.
D
• Use CD-R or CD-RW media for recording
your files. The disc must be finalized (i.e.
the session must be closed) in order to
play in this unit. This player is not compatible with multi-session discs. Only the first
session of a multi-session disc will be
recognized.
E
• This player only plays tracks that are
named with the file extension .mp3 or
.MP3.
www
F
.
• Baseline JPEG and EXIF 2.1* still image
files up to 8 mega-pixels are supported
(maximum vertical and horizontal resolution is 5120 pixels). (*File format used by
digital still cameras)
• The CD-ROM used to compile your JPEG
files must be ISO 9660 Level 1 or 2
compliant. CD physical format: Mode1,
Mode2 XA Form1. Romeo and Joliet file
systems are both compatible with this
player.
• This player only displays files that are
named with the file extension .jpg or
.JPG.
x iao y u163. co m
XV-DV99
138
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
• There are many different recording bitrates available to encode MP3 files. This
unit was designed to be compatible with
all of them. Audio encoded at 128Kbps
should sound close to regular CD Audio
quality. This player will play lower bit-rate
files, but please note that the sound
quality becomes noticeably worse at
lower bit-rates.
QQ
• This unit will play CD-ROM, CD-R, and
CD-RW discs containing files saved in the
MPEG-1 Audio Layer 3 (MP3) format with
a sampling rate of 32, 44.1 or 48kHz.
Incompatible files will not play and the
message Can’t play this format will be
displayed (NO PLAY in the front panel
display).
13942296513
• Folder and track names (excluding the file
extension) are displayed.
Compressed audio compatibility
TEL
TEL
• This player can recognize up to 999 files
(MP3/JPEG) and up to 499 folders. If a
disc exceeds these limits, only files and
folders up to these limits will be playable.
Files and folders are read/displayed in
alphabetical order. Note that if the file
structure is very complex, you may not be
able to read/play all files on the disc.
6
http://www.xiaoyu163.com
5
7
8
7.4 CLEANING
QQ 376315150 892498299
A
Before shipping out the product, be sure to clean the following positions by using the prescribed cleaning tools:
Position to be cleaned
Cleaning tools
Pickup lenses
Cleaning liquid : GEM1004
Cleaning paper : GED-008
Position to be cleaned
Cleaning tools
Fans
Cleaning paper : GED-008
B
TEL
TEL
13942296513
13942296513
QQ
QQ
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
C
D
E
www
.
x iao y u163. co m
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
139
8
1
3
http://www.xiaoyu163.com
2
4
8. PANEL FACILITIES
QQ 376315150 892498299
8.1 PANEL FACILITIES
A
Front panel
1
2
3
B
TIMER
0 OPEN/CLOSE
STANDBY/ON
TEL
TEL
4
6
8
1 VOLUME buttons
Use to adjust the volume.
5
STANDBY/ON
Press to switch the system on or into standby.
2 7
Press to stop playback.
6
Disc tray
7 0 OPEN/CLOSE
Press to open/close the disc tray.
8 PHONES jack
Headphone jack.
376315150 892498299
D
Display unit
9
9
E
www
F
10
Remote sensor
.
10 Display
See Display on next page for detailed
information.
x iao y u163. co m
XV-DV99
140
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
QQ
QQ
4 Timer indicator
Lights when the wake-up timeris set.
C
13942296513
13942296513
3 6
Press to switch to the DVD/CD function. Also
press to start/pause/resume playback.
7
5
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
Display
1 2
3
5
6
7
8
9
PGM
RPT-1
RDM
V.PART
ATT
4
MIDNIGHT QUIET
10 11
REC MODE
kHz
MHz
19
18
12
13
A
14
PRO LOGIC
DIGITAL
ADV.SURR
17 16 15
B
TEL
TEL
1
6 RPT and RPT-1
RPTlights during repeat play. RPT-1lights
during repeat one-track play.
Tuner indicators
13942296513
13942296513
Lights when in one of the RDS display or
search modes.
7 RDM
Lights during random play.
8 V.PART
Light when playing a video part of a DVD disc.
Lights when a broadcast is being
received.
9 ATT
Lights when the input attenuator is active for
the currently selected analog input.
Lights when a stereo FM broadcast is
being received in auto stereo mode.
QQ 3763 1515 0 89 2498 299
Lights when the wake-up timer is set.
3 MIDNIGHT
Lights when the Midnight mode is selected.
Lights when the sleep timer is active.
4 QUIET
Lights when the Quiet mode is selected.
12 2 PRO LOGIC II
Lights during Dolby Pro Logic decoding.
5 PGM
Lights when a program list has been
programmed.
13 2 DIGITAL
Lights during playback of a Dolby Digital
source.
376315150 892498299
376315150 892498299
2 3
Lights when a disc is playing.
11 Timer indicators
QQ
QQ
TEL 13942296513
Lights when FM mono reception is
selected.
10 REC MODE
Lights when Rec Mode is active.
C
D
E
www
.
x iao y u163. co m
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
141
8
1
A
2
3
http://www.xiaoyu163.com
4
QQ 376315150 892498299
14 Speaker indicators
These show which speakers are being used to
output the current source. The illustrations
below show some example displays.
5.1 channel surround sound
Stereo (2.1 channel) sound
3.1 channel sound with Dialogue
enhancement on the center
channel
B
5.1 channel surround sound with
Virtual Surround Back mode active
TEL
TEL
13942296513
13942296513
15 ADV.SURR.
Lights when one of the Advanced Surround
listening modes is selected.
16 DTS
Lights during playback of a DTS source.
17 kHz / MHz
Indicates the unit of the frequency shown in
the character display (kHz for AM, MHz for
FM).
C
376315150 892498299
19
Lights during multi-angle scenes on a DVD
disc.
D
E
www
F
.
x iao y u163. co m
XV-DV99
142
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
QQ
QQ
18 Character display
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
Remote control
3 DISPLAY
Press to display/change disc information
shown on-screen.
A
STANDBY/ON
CD
FM/AM
DVD
TUNER
L1/L2
TV
DISPLAY
LINE
0
8
1
3
4
5
¢
1 and
12
13
TUNE+
ST–
¡ and E/
0
6
ST+
Use for forward slow motion playback,
frame advance and forward scanning.
ENTER
MUTE
TUNE–
SOUND
8
14
9
8
MASTER
VOLUME
P
INPUT
B
Press to pause playback; press again to
restart.
TV CONTROL
10
/e
Use for reverse slow motion playback,
frame reverse and reverse scanning.
RETURN
DVD MENU
7
Press to start or resume playback.
11
¡
7
Disc playback controls
3
OPEN/CLOSE
3
4
4
0
1
2
VOL
TEL
TEL
7
Press to stop playback.
BASS MODE DIALOGUE
AUTO
SURROUND
15
17
18
19
20
PROGRAM
AUDIO
REPEAT
SUBTITLE
RANDOM
ANGLE
ZOOM
TOP MENU
HOME
MENU
1
2
3
SYSTEM
SETUP
TEST TONE
CH LEVEL
4
5
6
DIMMER
QUIET/
MIDNIGHT
TIMER/
CLOCK
7
8
9
– /– –
FOLDER–
FOLDER+
0
ENTER
CLR
MAIN
21
SUB
5 4
Press to jump to the beginning of the current
chapter/track, then to previous chapters/
tracks.
13942296513
13942296513
16
VIRTUAL SB
ADVANCED
6 DVD MENU
Press to display a DVD disc menu, or the Disc
Navigator if a VR format DVD-RW, CD, Video
CD, MP3 or JPEG disc is loaded.
22
7 Cursor buttons, ENTER and tuning
buttons
PDP ROOM SETUP
• Functions printed in green on the remote
control are accessed by switching the
MAIN /SUB/PDP switch to SUB.
ENTER
Press to select an option or execute a
command.
1
STANDBY/ON
Press to switch the system on or into standby.
TUNE +/–
Use to tune the radio.
2 Function select buttons
Press to select the source you want to listen to
(DVD (CD). TUNER,TV, LINE)
ST +/–
Use to select station presets when
listening to the radio.
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
QQ
QQ
Cursor buttons
Use the cursor buttons (» / « / | / \) to
navigate on-screen displays and menus.
C
D
E
www
.
x iao y u163. co m
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
143
8
1
3
http://www.xiaoyu163.com
4
QQ 376315150 892498299
8
A
2
(In SUB)
MUTE
Press to mute all sound from the speakers
and headphones (press again to cancel).
BASS MODE
Use to select a Bass Mode.
DIALOGUE
Use to select a Dialogue mode.
9 MASTER VOLUME
Use to adjust the volume.
VIRTUAL SB
Press to switch the Virtual Surround Back
speaker effect on/off.
10 TV CONTROL
Press to switch the TV on or into standby.
16 DVD/CD buttons
INPUT
Press to switch the TV input.
(In MAIN)
AUDIO
Press to select an audio channel or
language.
P +/–
Use to select channels on the TV.
B
TEL
11 0 OPEN/CLOSE
Press to open/close the disc tray.
13942296513
13 RETURN
Press to return to a previous menu screen.
(In SUB)
PROGRAM
Use to program/play a program list.
14 SOUND
Press to access the sound menu, from which
you can adjust the DSP effect level, bass and
treble, etc.
REPEAT
Use to select a repeat play mode.
RANDOM
Use to select a random play mode.
376315150 892498299
AUTO
Press to select the default decoding for
the current source.
17 (In SUB)
ZOOM
Press to change the screen zoom level.
SURROUND
Use to select a Surround mode.
ADVANCED
Use to select an Advanced Surround.
TOP MENU
Use to display the top menu of a DVD disc
in the play position (this may be the same
as pressing DVD MENU).
E
www
F
.
x iao y u163. co m
XV-DV99
144
1
2
3
http://www.xiaoyu163.com
4
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
(In MAIN)
QQ
QQ
15 Surround sound mode/sound
enhancement buttons
D
13942296513
ANGLE
Press to change camera angle during
DVD multi-angle scene playback.
12 ¢
Press to jump to the next chapter/track.
C
TEL
SUBTITLE
Press to display/change the DVD subtitle
display.
VOL +/–
Use to adjust the volume on the TV.
6
http://www.xiaoyu163.com
5
7
8
QQ 376315150 892498299
21 MAIN / SUB / PDP
Change from MAIN to SUB to access
functions printed in green. Switch to PDP to
be able to use teletext with Pioneer plasma
displays (see Teletext on/off below)
HOME MENU
Press to display (or exit) the on-screen
menu for Initial Settings, Play Mode
functions, etc.
18 (In SUB)
SYSTEM SETUP
Use to make various system and surround
sound settings.
(In MAIN)
TEST TONE
Use to output the test tone (for speaker
setup).
(In PDP)
A
ROOM SETUP
Press to start Room Setup.
(Teletext on/off)
Press to display/hide the teletext screen.
(Use the number buttons and the blue,
green, yellow and red buttons to navigate
teletext screens when using with a
Pioneer plasma display.)
CH LEVEL
Use to adjust the speaker level.
19 (In SUB)
DIMMER
Press to dim or brighten the display.
B
22 (In MAIN)
TEL
TEL
Number buttons
Use the number buttons for selecting
titles/chapters/tracks from a disc directly.
QUIET/MIDNIGHT
Use to select the Quiet and Midnight
modes.
13942296513
13942296513
TIMER/CLOCK
Press to display the clock and to access
the timer menu.
20 (In MAIN)
CLR
Press to clear an entry.
(In SUB)
FOLDER –
Press to jump to previous folders.
FOLDER +
Press to jump to the next folder.
376315150 892498299
376315150 892498299
QQ 3763 1515 0 89 2498 299
TEL 13942296513
C
QQ
QQ
ENTER
Selects menu options, etc. (works exactly
the same as the ENTER button in 7
above).
D
E
www
.
x iao y u163. co m
F
XV-DV99
5
6
http://www.xiaoyu163.com
7
145
8