Microflex Microphones - Edinburgh Projector Sales

Installed Microphones
Microflex
Microflex Microphones
There‘s never been a more flexible choice
Work a room in more ways than ever with Shure Microflex microphones.
Combining sleek, low profile aesthetics and a complete selection of
microphones and mounting options, the Microflex line offers the highest
standard of quality and efficiency for installed audio applications.
Microflex Gooseneck Microphones
• 12 cm (5”), 25 cm (10”), 30 cm (12”), 38 c, (15”) and 45 cm (18”) models fit a wide variety
of applications from the podium to the conference table
• Interchangeable condenser cartridges with superior audio quality
Microflex Boundary Microphones
• Multi-element, low-profile, or wireless microphone styles available
• Extremely versatile range of placement options for easy configuration and installation
Microflex Overhead Microphones
• Compact and adjustable 10 cm (4”) gooseneck
• Interchangeable condenser cartridges for accurate sound reproduction in any setting
Microflex Lavalier and Earset Microphones
• For applications requiring low-profile descreet placement
• Use in wired or wireless applications
APPLICATIONS
Conference Rooms
Seminars
Houses of Worship
Theaters
Lecterns
PRODUCT HIGHLIGHTS
Wide selection for customized installations
Wired or wireless models available
Superior audio quality
CommShield™
Technology for
improved RF resistance
Sleek, low-profile designs
MX405, MX410 and MX415 Miniature Gooseneck Microphones
Flexible in more ways than one, Microflex Miniature Gooseneck Microphones deliver unsurpassed style and performance for conference rooms and
similar applications. Offering desktop or mounted bases, wired or wireless options, and even interchangeable cartridges, it’s easy to get the perfect
fit for your application. Fully compatible with SLX® Wireless Systems, including the SLX4L wireless receiver with logic signal output for applications
requiring logic functionality.
Specifications
Type
Condenser (electret bias)
Frequency Response
50 Hz – 17 kHz
Polar Pattern
MX405/C, MX410/C, MX415/C: Cardioid
MX405/S, MX410/S, MX415/S: Supercardioid
Output Impedance
EIA rated at 150 Ω (170 Ω actual)
Output Configuration
Active balanced
Sensitivity at 1 kHz, open circuit voltage;
1 Pascal = 94 dB SPL
Cardioid: -35 dBV/Pa (18 mV)
Supercardioid: -34 dBV/Pa (21 mV)
Maximum SPL 1 kHz at 1% THD, 1 kΩ load
Cardioid: 121 dB
Supercardioid: 120 dB
Equivalent Output Noise A-weighted
Cardioid: 28 dB SPL
Supercardioid: 27 dB SPL
Signal-to-Noise Ratio
referenced at 94 dB SPL at 1 kHz
Cardioid: 66 dB
Supercardioid: 67 dB
Dynamic Range 1 kΩ load at 1 kHz
93 dB
Common Mode Rejection 10 Hz to 100 kHz
45 dB minimum
Preamplifier Output Clipping Level 1% THD
-8 dBV (0.4 V)
Polarity
3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2
relative to pin 3 of output XLR connector.
5-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4
relative to pin 2 of output XLR connector.
Weight
MX405: 54 g
MX410: 68 g
MX415: 70 g
MX400DP: 516 g
MX400SMP (w/ Kit): 125 g
Logic Connections
LED IN: Active low (≤1.0 V), TTL compatible. Absolute maximum voltage: -0.7 V to 50 V.
LOGIC OUT: Active low (≤1.0 V), sinks up to 20 mA, TTL compatible. Absolute maximum
voltage: -0.7 V to 50 V (up to 50 V through 3 kΩ).
Mute Switch Attenuation
-50 dB minimum
Cable
MX400DP: 6 m attached cable with shielded audio pair terminated at a 3-pin male XLR
and three unterminated conductors for logic control
Environmental Conditions
Operating temperature: -18 – 57 °C
Storage temperature: -29 – 74 °C
Relative humidity: 0 – 95%
Power Requirements
48 – 52 Vdc phantom, 8.0 mA
*for detailed dimensions please
reference MX405/410/415
user guide
MX415, MX410 and MX405
Miniature goosenecks
Available Models
The polar pattern of the cartridge is indicated by the model number suffix: C = Cardioid, S = Supercardioid, N = No Cartridge
MX405/C, MX405/S
127 mm (5 inch) gooseneck, bi-color status indicator, includes surface mount preamp
MX405R/N
127 mm (5 inch) gooseneck, light ring, includes surface mount preamp
MX410/C, MX410/S
254 mm (10 inch) gooseneck, bi-color status indicator, includes surface mount preamp
MX410R/N
254 mm (10 inch) gooseneck, light ring, includes surface mount preamp
MX415/C, MX415/S
381 mm (15 inch) gooseneck, bi-color status indicator, includes surface mount preamp
MX415R/N
381 mm (15 inch) gooseneck, light ring, includes surface mount preamp
MX405LP/C, MX405LP/S
127 mm (5 inch) gooseneck, bi-color status indicator, less preamp
MX405RLP/N
127 mm (5 inch) gooseneck, light ring, less preamp
MX410LP/C, MX410LP/S
254 mm (10 inch) gooseneck, cardioid, bi-color status indicator, less preamp
MX410RLP/N
254 mm (10 inch) gooseneck, light ring, less preamp
MX415LP/C, MX415LP/S
381 mm (15 inch) gooseneck, cardioid, bi-color status indicator, less preamp
MX415RLP/N
381 mm (15 inch) gooseneck, light ring, less preamp
www.shure.eu
MX400SMP
Surface mount preamp
MX400DP
Wired desktop base (also available as MX890
wireless desktop base)
Installed Microphones | Microflex | 2
MX405, MX410 and MX415 Miniature Gooseneck Microphones
Optional Accessories and Replacement Parts
MX400SMP
Surface mount preamp
R185B
Black cardioid cartridge for all
Microflex models
A412MWS
Metal locking windscreen
MX400DP
Wired desktop base. Includes
6.1 m attached cable
R184B
Black supercardioid cartridge for all
Microflex models
95A2487
Tapered windscreen
MX890
Wireless desktop base, compatible with SLX Wireless Systems
R183B
Black Omnidirectional cartridge for
all Microflex models
Furnished Accessories
Models with included Preamp
All Models
MX400SMP
Surface mount preamp
RK513WS
65A405
Rubber isolation rings
65A2190
Wing nut
95A2529
5-pin XLR-F
65A2166
Cap
Snap-fit foam windscreen (4 pcs.)
Supercardioid
+20
+20
+10
+10
0
dB
dB
Cardioid
ñ10
ñ10
-20
20
0
50 100
2
3 4 5 6 7 89
1000
2
3 4 5 6 7 89
10000 20000
Hz
-20
20
50 100
2
3 4 5 6 7 89
1000
2
3 4 5 6 7 89
10000 20000
Hz
Architectural Specifications
MX405/C – The microphone shall be an electret condenser 127 mm gooseneck microphone (5”) with cardioid polar pattern, black finish, and logic controlled bi-color
status indicator. The microphone shall be mounted in the included MX400SMP preamp. The microphone shall be resistant to RF interference from portable mobile
and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 18 mV/Pa. The microphone shall offer the option to interchange
cartridges with diverse polar pattern.
MX405/S – The microphone shall be an electret condenser 127 mm gooseneck microphone (5”) with supercardioid polar pattern, black finish, and logic controlled
bi-color status indicator. The microphone shall be mounted in the included MX400SMP preamp. The microphone shall be resistant to RF interference from portable
mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21 mV/Pa. The microphone shall offer the option to
interchange cartridges with diverse polar pattern.
MX405R/N – The microphone shall be an electret condenser 127 mm gooseneck microphone (5”) with no included cartridge, black finish, and logic controlled, upper red light ring status indicator. The microphone shall be mounted in the included MX400SMP preamp. The microphone shall be resistant to RF interference from
portable mobile and handheld devices. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX410/C – The microphone shall be an electret condenser 254 mm gooseneck microphone (10”) with cardioid polar pattern, black finish, and logic controlled
bi-color status indicator. The microphone shall be mounted in the included MX400SMP preamp. The microphone shall be resistant to RF interference from portable
mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 18 mV/Pa. The microphone shall offer the option to
interchange cartridges with diverse polar pattern.
MX410/S – The microphone shall be an electret condenser 254 mm gooseneck microphone (10”) with supercardioid polar pattern, black finish, and logic controlled
bi-color status indicator. The microphone shall be mounted in the included MX400SMP preamp. The microphone shall be resistant to RF interference from portable
mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21 mV/Pa. The microphone shall offer the option to
interchange cartridges with diverse polar pattern.
MX410R/N – The microphone shall be an electret condenser 254 mm gooseneck microphone (10”) with no included cartridge, black finish, and logic controlled, upper red light ring status indicator. The microphone shall be mounted in the included MX400SMP preamp. The microphone shall be resistant to RF interference from
portable mobile and handheld devices. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
www.shure.eu
Installed Microphones | Microflex | 3
MX405, MX410 and MX415 Miniature Gooseneck Microphones
MX415/C – The microphone shall be an electret condenser 381 mm gooseneck microphone (15”) with cardioid polar pattern, black finish, and logic controlled
bi-color status indicator. The microphone shall be mounted in the included MX400SMP preamp. The microphone shall be resistant to RF interference from portable
mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 18 mV/Pa. The microphone shall offer the option to
interchange cartridges with diverse polar pattern.
MX415/S – The microphone shall be an electret condenser 381 mm gooseneck microphone (15”) with supercardioid polar pattern, black finish, and logic controlled
bi-color status indicator. The microphone shall be mounted in the included MX400SMP preamp. The microphone shall be resistant to RF interference from portable
mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21 mV/Pa. The microphone shall offer the option to
interchange cartridges with diverse polar pattern.
MX415R/N – The microphone shall be an electret condenser 381 mm gooseneck microphone (15”) with no included cartridge, black finish, and logic controlled, upper red light ring status indicator. The microphone shall be mounted in the included MX400SMP preamp. The microphone shall be resistant to RF interference from
portable mobile and handheld devices. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX405LP/C – The microphone shall be an electret condenser 127 mm gooseneck microphone (5”) with cardioid polar pattern, black finish, and logic controlled
bi-color status indicator. The microphone shall be compatible with the MX400SMP or MX890. The microphone shall be resistant to RF interference from portable
mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 18 mV/Pa. The microphone shall offer the option to
interchange cartridges with diverse polar pattern.
MX405LP/S – The microphone shall be an electret condenser 127 mm gooseneck microphone (5”) with supercardioid polar pattern, black finish, and logic controlled bi-colorstatus indicator. The microphone shall be compatible with the MX400SMP, MX400DP or MX890. The microphone shall be resistant to RF interference
from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21 mV/Pa. The microphone shall offer the
option to interchange cartridges with diverse polar pattern.
MX405RLP/N – The microphone shall be an electret condenser 127 mm gooseneck microphone (5”) with no included cartridge, black finish, and logic controlled,
upper red light ring status indicator. The microphone shall be compatible with the MX400SMP, MX400DP or MX890. The microphone shall be resistant to RF
interference from portable mobile and handheld devices.
MX410LP/C – The microphone shall be an electret condenser 254 mm gooseneck microphone (10”) with cardioid polar pattern, black finish, and logic controlled
bi-color status indicator. The microphone shall be compatible with the MX400SMP or MX890. The microphone shall be resistant to RF interference from portable
mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 18 mV/Pa. The microphone shall offer the option to
interchange cartridges with diverse polar pattern.
MX410LP/S – The microphone shall be an electret condenser 254 mm gooseneck microphone (10”) with supercardioid polar pattern, black finish, and logic controlled bi-color status indicator. The microphone shall be compatible with the MX400SMP, MX400DP or MX890. The microphone shall be resistant to RF interference
from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21 mV/Pa. The microphone shall offer the
option to interchange cartridges with diverse polar pattern.
MX410RLP/N – The microphone shall be an electret condenser 254 mm gooseneck microphone (10”) with no included cartridge, black finish, and logic controlled,
upper red light ring status indicator. The microphone shall be compatible with the MX400SMP, MX400DP or MX890. The microphone shall be resistant to RF interference from portable mobile and handheld devices. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX415LP/C – The microphone shall be an electret condenser 381 mm gooseneck microphone (15”) with cardioid polar pattern, black finish, and logic controlled
bi-color status indicator. The microphone shall be compatible with the MX400SMP or MX890. The microphone shall be resistant to RF interference from portable
mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 18 mV/Pa. The microphone shall offer the option to
interchange cartridges with diverse polar pattern.
MX415LP/S – The microphone shall be an electret condenser 381 mm gooseneck microphone (15”) with supercardioid polar pattern, black finish, and logic controlled bi-color status indicator. The microphone shall be compatible with the MX400SMP, MX400DP or MX890. The microphone shall be resistant to RF interference
from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21 mV/Pa. The microphone shall offer the
option to interchange cartridges with diverse polar pattern.
MX415RLP/N – The microphone shall be an electret condenser 381 mm gooseneck microphone (15”) with no included cartridge, black finish, and logic controlled,
upper red light ring status indicator. The microphone shall be compatible with the MX400SMP, MX400DP or MX890. The microphone shall be resistant to RF interference from portable mobile and handheld devices. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
www.shure.eu
Installed Microphones | Microflex | 4
MX412 and MX418 Standard Gooseneck Microphones
Microflex Standard Gooseneck Microphones provide the added length and flexibility needed for speakers in environments like lecterns, pulpits, and
courtrooms. Available in four models with a variety of lenghts and mounting styles to choose from, Microflex Gooseneck microphones feature high
sensitivity and balanced, transformerless output for maximum resistance to electromagnetic hum and RF interference, even over long cable runs.
Specifications
Type
Condenser (electret bias)
Frequency Response
50 Hz – 17 kHz
Polar Pattern
MX412/C, MX418/C: Cardioid
MX412/S, MX418/S: Supercardioid
Omnidirectional cartridge available separately
Output Impedance
EIA rated at 150 Ω (170 Ω actual)
Sensitivity
at 1 kHz, open circuit voltage;
1 Pascal = 94 dB SPL
Cardioid: -35 dBV/Pa (17.8 mV)
Supercardioid: -33.5 dBV/Pa (21.1 mV)
Omnidirectional: -27.5 (42.2 mV)
Maximum SPL
1 kHz at 1% THD, 1 kΩ load
Cardioid: 124.2 dB
Supercardioid: 122.7 dB
Omnidirectional: 116.7 dB
Equivalent Output Noise
A-weighted
Cardioid: 28 dB SPL
Supercardioid: 26.5 dB SPL
Omnidirectional: 20.5 dB SPL
Signal-to-Noise Ratio
referenced at 94 dB SPL at 1 kHz
Cardioid: 66 dB
Supercardioid: 67.5 dB
Omnidirectional: 73.5 dB
Dynamic Range
1 kΩ load at 1 kHz
96.2 dB
100 dB at 0 gain (internal modification)
Common Mode Rejection
45 dB minimum (10 Hz – 100 kHz)
Preamplifier Output Clipping Level
1% THD
-6 dBV (0.5 V)
Polarity
Positive sound pressure on diaphragm produces positive voltage on pin 2
relative to pin 3 of output XLR connector.
Mute Switch Attenuation
-50 dB minimum
Cable
MX412D and MX418D: The 3 m attached custom cable contains a shielded
audio pair and three unshielded conductors for logic control.
Overall diameter = 4 mm
Environmental Conditions
Operating temperature range: -18° – 57° C
Relative humidity: 0 – 95%
Power Requirements
11 – 52 Vdc phantom, 8.0 mA
Available Models
The polar pattern of the cartridge is indicated by the model number suffix: C = Cardioid, S = Supercardioid, N = No Cartridge
MX412/C, MX412/S, MX412/N
305 mm (12 inch) gooseneck, attached XLR preamp, shock mount, flange mount,
snap-fit foam windsreen
MX418/C, MX418/S, MX418/N
457 mm (18 inch) gooseneck, attached XLR preamp, shock mount, flange mount,
snap-fit foam windsreen
MX412S/C, MX412S/S, MX412S/N
305 mm (12 inch) gooseneck, attached XLR preamp, Shock Mount, flange mount,
snap-fit foam wndscreen, mute switch, LED Indicator
MX418S/C, MX418S/S, MX418S/N
457 mm (18 inch) gooseneck, attached XLR preamp, shock mount, flange mount,
snap-fit foam windscreen, mute switch, LED indicator
MX412SE/C, MX412SE/S,
MX412SE/N
305 mm (12 inch) gooseneck, in-line preamp, shock mount, flange mount,
3 m side-exit (or bottom-exit) cable, snap-fit foam windscreen
MX418SE/C, MX418SE/S,
MX418SE/N
457 mm (18 inch) gooseneck, in-line preamp, shock mount, flange mount,
3 m side-exit (or bottom-exit) cable, snap-fit foam windscreen
MX412D/C, MX412D/S, MX412D/N
305 mm (12 inch) gooseneck, desktop base with 3 m cable, logic functions,
programmable switch and LED indicator, snap-fit foam windscreen
MX418D/C, MX418D/S, MX418D/N
457 mm (18 inch) gooseneck, desktop base with 3 m cable, logic functions,
programmable switch and LED indicator, snap-fit foam windscreen
www.shure.eu
*for detailed dimensions
please reference MX412/418
user guides
MX418
Gooseneck with
attached preamp
and shockmount
MX418SE
Gooseneck with
in-line preamp and
side exit cable
MX412D
Gooseneck with
attached desktop
base
Installed Microphones | Microflex | 5
MX412 and MX418 Standard Gooseneck Microphones
Furnished Accessories
MX412, MX418, MX412S, MX418S Models
MX412SE, MX418SE Models
MX412D, MX418D Models
65B8264
Flange
A12C
Flange and nut
RK412WS
65B8265
Retainer
80A476
Clamp
80A439
Isolation ring
A400SM
Shock mount
RK412WS
Snap-fit foam windscreen (1 furnished,
4 in replacement pack)
RK412WS
Snap-fit foam windscreen (1 furnished, 4 in replacement
pack)
A400SM
Shock mount
31B1762A
Shock mount adapter
80A67
Hex wrench #4
Snap-fit foam windscreen (1 furnished,
4 in replacement pack)
Optional Accessories and Replacement Parts
A99WS
Foam ball windscreen
R183B
Black omnidirectional cartridge
for all Microflex models
A412MWS
Metal locking windscreen
RK100PK
Replacement in-line
preamplifier (SE models)
R184B
Black supercardioid cartridge for
all Microflex models
A412B
Desktop base
C130
Custom logic cable
(specify length)
R185B
Black cardioid cartridge for all
Microflex models
A57F
Stand adapter
Supercardioid
Omnidirectional
+20
+10
+10
+10
0
0
ñ10
ñ10
-20
-20
20
50 100
2
3 4 5 6 7 89
1000
Hz
www.shure.eu
2
3 4 5 6 7 89
10000 20000
dB
+20
dB
dB
Cardioid
+20
20
0
ñ10
50 100
2
3 4 5 6 7 89
1000
Hz
2
3 4 5 6 7 89
10000 20000
-20
20
50 100
2
3 4 5 6 7 89
1000
2
3 4 5 6 7 89
10000 20000
Hz
Installed Microphones | Microflex | 6
MX412 and MX418 Standard Gooseneck Microphones
Architectural Specifications
MX412/C – The microphone shall be an electret condenser 305 mm gooseneck microphone (12”) with cardioid polar pattern, interchangeable cartridges integrated XLR preamp, and black finish. The
microphone shall be resistant to RF interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 17.8 mV/Pa. The microphone
shall offer the option to interchange cartridges with diverse polar pattern.
MX412/S – The microphone shall be an electret condenser 305 mm gooseneck microphone (12”) with supercardioid polar pattern, integrated XLR preamp, and black finish. The microphone shall be
resistant to RF interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21.1 mV/Pa. The microphone shall offer the option to
interchange cartridges with diverse polar pattern.
MX412/N – The microphone shall be an electret condenser 305 mm gooseneck microphone (12”) with no included cartridge, integrated XLR preamp, and black finish. The microphone shall be resistant to RF interference from portable mobile and handheld devices. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX418/C – The microphone shall be an electret condenser 457 mm gooseneck microphone (18”) with cardioid polar pattern, integrated XLR preamp, and black finish. The microphone shall be
resistant to RF interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 17.8 mV/Pa. The microphone shall offer the option to
interchange cartridges with diverse polar pattern.
MX418/S – The microphone shall be an electret condenser 457 mm gooseneck microphone (18”) with supercardioid polar pattern, integrated XLR preamp, and black finish. The microphone shall be
resistant to RF interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21.1mV/Pa. The microphone shall offer the option to
interchange cartridges with diverse polar pattern.
MX418/N – The microphone shall be an electret condenser 457 mm gooseneck microphone (18”) with no included cartridge, integrated XLR preamp, and black finish. The microphone shall be resistant to RF interference from portable mobile and handheld devices. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX412S/C – The microphone shall be an electret condenser 305 mm gooseneck microphone (12”) with cardioid polar pattern, integrated XLR preamp, black finish, mute switch, and LED indicator. The
microphone shall be resistant to RF interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 17.8 mV/Pa. The microphone
shall offer the option to interchange cartridges with diverse polar pattern.
MX412S/S – The microphone shall be an electret condenser 305 mm gooseneck microphone (12”) with supercardioid polar pattern, integrated XLR preamp, black finish, mute switch, and LED indicator. The microphone shall be resistant to RF interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21.1 mV/Pa. The
microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX412S/N – The microphone shall be an electret condenser 305 mm gooseneck microphone (12”) with integrated XLR preamp, black finish, mute switch, and LED indicator. The microphone shall be
resistant to RF interference from portable mobile and handheld devices. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX418S/C – The microphone shall be an electret condenser 457 mm gooseneck microphone (18”) with cardioid polar pattern, integrated XLR preamp, black finish, mute switch, and LED indicator. The
microphone shall be resistant to RF interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 17.8 mV/Pa. The microphone
shall offer the option to interchange cartridges with diverse polar pattern.
MX418S/S – The microphone shall be an electret condenser 457 mm gooseneck microphone (18”) with supercardioid polar pattern, integrated XLR preamp, black finish, mute switch, and LED indicator. The microphone shall be resistant to RF interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21.1 mV/Pa. The
microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX418S/N – The microphone shall be an electret condenser 457 mm gooseneck microphone (18”) with integrated XLR preamp, black finish, mute switch, and LED indicator. The microphone shall be
resistant to RF interference from portable mobile and handheld devices. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX412SE/C – The microphone shall be an electret condenser 305 mm gooseneck microphone (12”) with cardioid polar pattern, black finish, and 3 m side-exit (or bottom-exit) cable that terminates to a
4-pin miniature (TA4F) connector. The microphone shall be connected to the included in-line preamp. The microphone shall be resistant to RF interference from portable mobile and handheld devices.
The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 17.8 mV/Pa. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX412SE/S – The microphone shall be an electret condenser 305 mm gooseneck microphone (12”) with supercardioid polar pattern, black finish, and 3 m side-exit (or bottom-exit) cable that
terminates to a 4-pin miniature (TA4F) connector. The microphone shall be connected to the included in-line preamp. The microphone shall be resistant to RF interference from portable mobile and
handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21.1 mV/Pa. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX412SE/N – The microphone shall be an electret condenser 305 mm gooseneck microphone (12”) with no included cartridge, black finish, and 3 m side-exit (or bottom-exit) cable that terminates to a
4-pin miniature (TA4F) connector. The microphone shall be connected to the included in-line preamp. The microphone shall be resistant to RF interference from portable mobile and handheld devices.
The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX418SE/C – The microphone shall be an electret condenser 457 mm gooseneck microphone (18”) with cardioid polar pattern, black finish, and 10” (3m) side-exit (or bottom-exit)) cable that
terminates to a 4-pin miniature (TA4F) connector. The microphone shall be connected to the included in-line preamp. The microphone shall be resistant to RF interference from portable mobile and
handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 17.8 mV/Pa. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX418SE/S – The microphone shall be an electret condenser 457 mm gooseneck microphone (18”) with supercardioid polar pattern, black finish, and 10” (3m) side-exit (or bottom-exit) cable that
terminates to a 4-pin miniature (TA4F) connector. The microphone shall be connected to the included in-line preamp. The microphone shall be resistant to RF interference from portable mobile and
handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21.1mV/Pa. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX418SE/N – The microphone shall be an electret condenser 457 mm gooseneck microphone (18”) with no included cartridge, black finish, and 10” (3m) side-exit (or bottom-exit) cable that
terminates to a 4-pin miniature (TA4F) connector. The microphone shall be connected to the included in-line preamp. The microphone shall be resistant to RF interference from portable mobile and
handheld devices. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX412D/C – The microphone shall be an electret condenser 305 mm gooseneck microphone (12”) with cardioid polar pattern and black finish. The microphone shall be mounted on a desktop base
with a logic controlled programmable switch and LED indicator. The microphone shall include an attached 3 m cable. The microphone shall be resistant to RF interference from portable mobile and
handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 17.8 mV/Pa. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX412D/S – The microphone shall be an electret condenser 305 mm gooseneck microphone (12”) with supercardioid polar pattern and black finish. The microphone shall be mounted on a desktop
base with a logic controlled programmable switch and LED indicator. The microphone shall include an attached 3 m cable. The microphone shall be resistant to RF interference from portable mobile
and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21.1 mV/Pa. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX412D/N – The microphone shall be an electret condenser 305 mm gooseneck microphone (12”) with no included cartridge and black finish. The microphone shall be mounted on a desktop base
with a logic controlled programmable switch and LED indicator. The microphone shall include an attached 3 m cable. The microphone shall be resistant to RF interference from portable mobile and
handheld devices. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX418D/C – The microphone shall be an electret condenser 457 mm gooseneck microphone (18”) with cardioid polar pattern and black finish. The microphone shall be mounted on a desktop base
with a logic controlled programmable switch and LED indicator. The microphone shall include an attached 3 m cable. The microphone shall be resistant to RF interference from portable mobile and
handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 17.8 mV/Pa. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX418D/S – The microphone shall be an electret condenser 457 mm gooseneck microphone (18”) with supercardioid polar pattern and black finish. The microphone shall be mounted on a desktop
base with a logic controlled programmable switch and LED indicator. The microphone shall include an attached 3 m cable. The microphone shall be resistant to RF interference from portable mobile
and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21.1mV/Pa. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX418D/N – The microphone shall be an electret condenser 457 mm gooseneck microphone (18”) with no included cartridge and black finish. The microphone shall be mounted on a desktop base
with a logic controlled programmable switch and LED indicator. The microphone shall include an attached 3 m cable. The microphone shall be resistant to RF interference from portable mobile and
handheld devices. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
www.shure.eu
Installed Microphones | Microflex | 7
MX396 Multi-Element Boundary Microphones
Microflex Multi-Element Boundary Microphones deliver a unique and versatile tool for conference room installations. Clean and simple in appearance,
Multi-Element Boundary mics come in two or three element configurations, combining the coverage of multiple microphones into one small, compact package.
Specifications
Type
Condenser (electret bias)
Frequency Response
50 Hz – 17 kHz
Output Impedance
EIA rated at 150 Ω (170 Ω actual)
Output Configuration
Active balanced
Sensitivity
at 1 kHz, open circuit voltage;
1 Pa = 94 dB SPL
-35 dBV/Pa (18 mV)
Maximum SPL
1 kHz at 1% THD, 1 kΩ load
122 dB
Equivalent Output Noise A-weighted
28 dB SPL
Signal-to-Noise Ratio
referenced at 94 dB SPL at 1 kHz
66 dB
Dynamic Range
1 kΩ load at 1 kHz
94 dB
Common Mode Rejection
10 Hz to 100 kHz
45 dB minimum
Preamplifier Output Clipping Level
1% THD
-6 dBV (0.5 V)
Weight
Net: 587 g
Packaged: 816 g
Logic Connections
LED IN: Active low (≤1.0 V), sinks up to 20 mA, TTL compatible.
Absolute maximum voltage: -0.7 V to 50 V (up to 50 V through 3 kΩ).
LOGIC OUT: Active low (≤1.0V), sinks up to 20 mA, TTL compatible.
Absolute maximum voltage: -0.7 V to 50 V (up to 50 V through 3 kΩ).
Mute Switch Attenuation
-50 dB minimum
Cable
6 m attached unterminated cable with three shielded audio pairs and
three shielded conductors for logic control.
Environmental Conditions
Operating temperature: -18 – 57 °C
Storage temperature: -29 – 74 °C
Relative humidity: 0 – 95%
Power Requirements
MX396/C-DUAL: 48 – 52 Vdc phantom, 10.0 mA
MX396/C-TRI: 48 – 52 Vdc phantom, 12.0 mA
MX396 Multi-Element boundary microphone
Available Models
MX396/C-DUAL
Dual-Element 0-180 degrees, back or bottom exit cable, mute output, LED input
MX396/C-TRI
Tri-Element 90-0-90 mic, adjustable to 120-120-120 degrees, back or bottom exit cable,
mute output, LED input
Furnished Accessories and Replacement Parts
65A2190
Fastening wingnut
R185B
Cardioid replacement cartridge (x 1)
31A2165
Fastening tube
65A405
Rubber isolation rings
Architectural Specifications
MX396/C-Dual – The microphone shall be a surface mounted, black electret condenser microphone with two cardioid polar pattern elements, each with individual channel output. The microphone shall include a logic enabled, bi-color status indicator and
programmable mute switch. The microphone shall be resistant to RF interference from portable mobile and handheld devices.
The frequency range shall be 50 Hz to 17 kHz and the sensitivity of each individual element, 18 mV/Pa.
MX396/C-Tri – The microphone shall be a surface mounted, black electret condenser microphone with three cardioid polar pattern elements, each with individual channel output. The microphone shall include a logic enabled, bi-color status indicator and
programmable mute switch. The microphone shall be resistant to RF interference from portable mobile and handheld devices.
The frequency range shall be 50 Hz to 17 kHz and the sensitivity of each individual element, 18 mV/Pa.
www.shure.eu
Installed Microphones | Microflex | 8
MX395 Low Profile Boundary Microphones
The Microflex Low Profile Boundary Microphone is an ideal table microphone when minimal presence is of high priority. Perfect for meeting rooms,
these microphones deliver exceptional sound pickup while barely being noticed. Choose from a selection of colors and pickup patterns for customized
table and ceiling installations.
Specifications
Type
Condenser (electret bias)
Frequency Response
50 HZ – 17 kHz
Polar Pattern
MX395/O: Omnidirectional
MX395/C: Cardioid
MX395/BI: Bidirectional
Output Impedance
EIA rated at 150 Ω (170 Ω actual)
Output Configuration
Active balanced
Sensitivity
at 1 kHz , open circuit voltage;
1 Pascal = 94 dB SPL
Cardioid: -35 dBV/Pa (18 mV)
Omnidirectional: -28 dBV/Pa (42 mV)
Bidirectional: -37 dBV/Pa (14 mV)
Maximum SPL
1 kHz at 1% THD, 1 kΩ load
Cardioid: 121 dB
Omnidirectional: 114 dB
Bidirectional: 123 dB
Equivalent Output Noise
A-weighted
Cardioid: 28 dB SPL
Omnidirectional: 21 dB SPL
Bidirectional: 29 dB
Signal-to-Noise Ratio
referenced at 94 dB SPL at 1 kHz
Cardioid: 66 dB
Omnidirectional: 73 dB
Bidirectional: 65 dB
Dynamic Range
1 kΩ load at 1 kHz
Cardioid: 93 dB
Omnidirectional: 93 dB
Bidirectional: 94 dB
Common Mode Rejection
45 dB minimum 10 Hz to 100 kHz
Preamplifier Output Clipping Level
1% THD
-8 dBV (0.4 V)
Polarity
3-pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to
pin 3 of output XLR connector.
5-pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 4 relative to
pin 2 of output XLR connector.
Weight
Net: 136 g; Packaged: 374 g
Logic Connections
LED IN: Active low (≤ 1.0 V), TTL compatible. Absolute maximum voltage: -0.7 V to 50 V.
Environmental Conditions
Operating temperature: -18 – 57 °C
Storage temperature: -29 – 74 °C
Relative humidity: 0 – 95%
Power Requirements
MX395: 11 – 52 Vdc phantom, 2.0 mA
MX395-LED: 48 – 52 Vdc phantom, 8.0 mA
MX395
Low Profile
Boundary Mic
Available Models
The polar pattern of the cartridge is indicated by the model number suffix: C = Cardioid, O = Omnidirectional, BI = Bidirectional
MX395B/C, MX395B/BI, MX395B/O
Black, 3-pin XLR
MX395AL/C, MX395AL/BI, MX395AL/O
Aluminum, 3-pin XLR
MX395W/O
White, 3-pin XLR
MX395B/C-LED, MX395B/BI-LED, MX395B/O-LED
Black, 5-pin XLR, LED, bi-color status indicator
www.shure.eu
Installed Microphones | Microflex | 9
MX395 Low Profile Boundary Microphones
Furnished Accessories
65A405
Rubber isolation rings
95A1118 (LED Models only)
5-pin XLR-female connector
65A2190
Wing nut
Architectural Specifications
MX395AL/C – The microphone shall be a surface mounted, aluminum finish, electret condenser microphone with low-cut
switch and cardioid polar pattern. The visible diameter and height of the microphone above the mounting surface shall be
32 mm and 24 mm. The microphone shall be resistant to RF interference from portable mobile and handheld devices. The
frequency response range shall be 50 Hz to 17 kHz and the sensitivity 18 mV/Pa.
MX395B/C – The microphone shall be a surface mounted, black, electret condenser microphone with low-cut switch and
cardioid polar pattern. The visible diameter and height of the microphone above the mounting surface shall be 32 mm and
24 mm. The microphone shall be resistant to RF interference from portable mobile and handheld devices. The frequency
response range shall be 50 Hz to 17 kHz and the sensitivity 18 mV/Pa.
MX395B/C-LED – The microphone shall be a surface mounted, black, electret condenser microphone with low-cut switch
and cardioid polar pattern. The microphone shall include a logic controlled, bi-color status indicator. The visible diameter and
height of the microphone above the mounting surface shall be 32 mm and 24 mm. The microphone shall be resistant to RF
interference from portable mobile and handheld devices. The frequency response range shall be 50 Hz to 17 kHz and the
sensitivity 18 mV/Pa.
Cardioid
MX395AL/O – The microphone shall be a surface mounted, aluminum finish, electret condenser microphone with low-cut
switch and omnidirectional polar pattern. The visible diameter and height of the microphone above the mounting surface shall
be 32 mm and 24 mm. The microphone shall be resistant to RF interference from portable mobile and handheld devices.
The frequency response range shall be 50 Hz to 17kHz and the sensitivity 42 mV/Pa.
MX395B/O – The microphone shall be a surface mounted, black, electret condenser microphone with low-cut switch and omnidirectional polar pattern. The visible diameter and height of the microphone above the mounting surface shall be 32 mm
and 24 mm. The microphone shall be resistant to RF interference from portable mobile and handheld devices. The frequency
response range shall be 50 Hz to 17kHz and the sensitivity 42 mV/Pa.
MX395B/O-LED – The microphone shall be a surface mounted, black, electret condenser microphone with low-cut switch
and omnidirectional polar pattern. The microphone shall include a logic controlled, bi-color status indicator. The visible
diameter and height of the microphone above the mounting surface shall be 32 mm and 24 mm. The microphone shall be
resistant to RF interference from portable mobile and handheld devices. The frequency response range shall be 50 Hz to 17
kHz and the sensitivity 42 mV/Pa.
MX395W/O – The microphone shall be a surface mounted, white, electret condenser microphone with low-cut switch and omnidirectional polar pattern. The visible diameter and height of the microphone above the mounting surface shall be 32 mm
and 24 mm. The microphone shall be resistant to RF interference from portable mobile and handheld devices. The frequency
response range shall be 50 Hz to 17kHz and the sensitivity 42 mV/Pa.
MX395AL/BI – The microphone shall be a surface mounted, aluminum finish, electret condenser microphone with low-cut
switch and bi-directional polar pattern. The visible diameter and height of the microphone above the mounting surface shall
be 32 mm and 24 mm. The microphone shall be resistant to RF interference from portable mobile and handheld devices.
The frequency response range shall be 50 Hz to 17kHz and the sensitivity 14 mV/Pa.
Bidirectional
MX395B/BI – The microphone shall be a surface mounted, black, electret condenser microphone with low-cut switch and
bi-directional polar pattern. The visible diameter and height of the microphone above the mounting surface shall be 32 mm
and 24 mm. The microphone shall be resistant to RF interference from portable mobile and handheld devices. The frequency
response range shall be 50 Hz to 17 kHz and the sensitivity 14 mV/Pa.
MX395B/BI-LED – The microphone shall be a surface mounted, black, electret condenser microphone with low-cut switch
and bi-directional polar pattern. The microphone shall include a logic controlled, bi-color status indicator. The visible diameter
and height of the microphone above the mounting surface shall be 32 mm and 24 mm. The microphone shall be resistant to
RF interference from portable mobile and handheld devices. The frequency response range shall be 50 Hz to 17 kHz and the
sensitivity 14 mV/Pa.
Omnidirectional
www.shure.eu
Installed Microphones | Microflex | 10
MX690 Wireless Boundary and MX890 Wireless Desktop Base
The Microflex Wireless Boundary Microphone as well as the Wireless Desktop Base offer total freedom of placement with no holes to drill or cables to
run for installation. They are the perfect solution for conference and meeting spaces where users demand flexibility and high performance. Compatible
with Shure SLX Wireless Systems, including the SLX4L receiver with logic signal output for applications requiring logic functionality.
Specifications
MX690 Microphone Specifications
Type
Condenser (electret bias)
Frequency Response
50 Hz – 17 kHz
Polar Pattern
Cardioid
Sensitivity
at 1 kHz, open circuit voltage;
1 Pascal = 94 dB SPL
-33 dBV/Pa (22 mV)
Dynamic Range
96 dB 1 kΩ load at 1 kHz
Common Mode Rejection
45 dB minimum 10 Hz to 100 kHz
Preamplifier Output Clipping Level
1% THD
-6 dBV (0.5 V)
Polarity
Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of
output XLR connector or tip of 1/4” phone plug (both on SLX4 or SLX4L wireless receiver).
MX690
Wireless Boundary Microphone
MX690 and MX890 Transmitter Specifications
RF Power
10 mW
Operating Range
30 m
Note: Actual range depends on RF signal absorption, reflection, and interference
Frequency Stability
±10 ppm
Maximum Frequency Deviation
45 kHz
Oscillator Type
Phase-locked loop (PLL) controlled synthesizer
Power Requirements
3 V (2 AA alkaline or rechargeable batteries)
Battery Life
≥8 hours (alkaline)
Power Consumption
130 mA, ± 15 mA
Operating Temperature Range
-18 – 57 °C
Note: Battery may limit this range
Dimensions (H x W x L)
43 mm x 87 mm x 148 mm
Weight
MX690 Net: 318 g MX890 Net: 312 g
Packaged: 516 g Packaged: 530 g
MX890
Wireless Desktop Base
Available Models
MX690
Wireless boundary microphone, cardioid, mute switch
MX890
Wireless desktop base for MX405 and MX410 models, mute switch
Optional Accessories
SLX4
Wireless diversity receiver
SLX4L
Wireless diversity receiver with logic output
Architectural Specifications
MX690 – The microphone shall be a surface mounted, black condenser microphone with a cardioid polar pattern. The microphone shall include a bi-color LED status indicator and a programmable mute switch. The microphone shall have an integrated
wireless transmitter for audio signals with switchable carrier frequencies as well as preprogrammed groups up to 12 compatible
channels. An infrared signal shall be used to synchronize the frequency between transmitter and receiver. The microphone shall
be resistant to RF interference from portable mobile and handheld devices. The frequency range shall be 50 Hz to 17 kHz and the
sensitivity shall be 22 mV/Pa.
MX890 – The wireless desk stand shall be a transmitter base for audio signals with switchable carrier frequencies as well as
preprogrammed groups with up to 12 compatible channels. An infrared signal shall be used to synchronize the frequency between
transmitter and receiver. The wireless desktop base shall be used with the MX405 and MX410 series gooseneck microphones and
shall feature a programmable mute switch.
MX690
www.shure.eu
Installed Microphones | Microflex | 11
MX202 Overhead Microphones
Easily hung from ceilings, Microflex Overhead Microphones capture sound from speakers, choirs, stages, and more conveniently and unobtrusively
from above. Compact and flexible, overhead microphones each feature a 10 cm (4”) gooseneck, multiple preamp options for easy installation into
ceilings or microphone stands, and versatile condenser cartridges for accurate sound reproduction in any setting.
Specifications
Type
Condenser (electret bias)
Frequency Response
50 Hz – 17 kHz
Polar Pattern
MX202/C: Cardioid
MX202/O: Omnidirectional
MX202/S: Supercardioid
Output Impedance
150 Ω rated at EIA (180 Ω actual)
Sensitivity
(at 1 kHz , open circuit voltage;
1 Pascal = 94 dB SPL)
Cardioid: -35.0 dBV/Pa (17.8 mV)
Supercardioid: -33.5 dBV/Pa (21.1 mV)
Omnidirectional: -27.5 dBV/Pa (42.2 mV)
Maximum SPL
(1 kHz at 1% THD, 1 kΩ load;
All values +6 dB at 0 gain)
Cardioid: 124.2 dB
Supercardioid: 122.7 dB
Omnidirectional: 116.7 dB
Equivalent Output Noise A-weighted
Cardioid: 28.0 dB SPL
Supercardioid: 26.5 dB SPL
Omnidirectional: 20.5 dB SPL
Signal to Noise Ratio
(referenced at 94 dB SPL)
Cardioid: 66.0 dB
Supercardioid: 67.5 dB
Omnidirectional: 73.5 dB
Dynamic Range 1 kΩ load at 1 kHz
96.2 dB
100 dB at 0 gain (internal modification)
Common Mode Rejection 10 Hz to 100 kHz
45 dB minimum
Preamplifier Output Clipping Level 1% THD
-6 dBV (0.5 V)
Polarity
Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to
pin 3 of output connector.
Power Requirements
11 – 52 Vdc phantom, 2.0 mA
Environmental Requirements
Operating temperature range: -18° C – 57° C
Relative humidity: 0 – 95%
Available Models
The polar pattern of the cartridge is indicated by the model number suffix: C = Cardioid, S = Supercardioid, N = No Cartridge
MX202B/C, MX202B/S, MX202B/N
Black mini-condenser microphone; includes cable, in-line preamplifier, and stand adapter
MX202W/C, MX202W/S, MX202W/N
White mini-condenser microphone; includes cable, in-line preamplifier, and stand adapter
MX202BP/C, MX202BP/S, MX202BP/N
Black mini-condenser microphone; includes cable and plate-mounted preamplifier
MX202WP/C, MX202WP/S, MX202WP/N
White mini-condenser microphone; includes cable and plate-mounted preamplifier
MX202
Overhead Microphone
www.shure.eu
Installed Microphones | Microflex | 12
MX202 Overhead Microphones
Furnished Accessories
Black snap-fit foam windscreen
White snap-fit foam windscreen
65B1752
Stand adapter
(MX202B)
RK202PK
Preamplifier kit, plate mounted,
White (MX202BP & MX202WP)
RK100PK/
RK100PKW
In-line preamplifier
(MX202W & MX202B)
80A476
Clamp (MX202B & MX202WP)
80B489
Hang clip
+20
+10
dB
RK183WS (Black)
95B2064 (White)
0
–10
Optional Accessories and Replacement Parts
A202BB
Desk stand
R183B (Black)
R183W (White)
Omnidirectional cartridge
for all Microflex models
80A479
Strain relief
(MX202BP & MX202WP)
R184B (Black)
R184W (White)
Supercardioid cartridge
for all Microflex models
A57F
Stativ adapter (MX202B)
R185B (Black)
R185W (White)
Cardioid cartridge for
all Microflex models
-20
20
50 100
2
3 4 5 6 7 89
1000
2
3 4 5 6 7 89
10000 20000
2
3 4 5 6 7 89
10000 20000
Hz
Architectural Specifications
MX202B/C – The microphone shall be an electret condenser overhead microphone with a cardioid polar pattern, 10 cm gooseneck,
in-line preamplifier, and black finish. The microphone shall be resistant to RF interference from portable mobile and handheld
devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 17.8 mV/Pa. The microphone shall offer the
option to interchange cartridges with diverse polar pattern.
MX202/C
MX202B/S – The microphone shall be an electret condenser overhead microphone with a supercardioid polar pattern, 10 cm
gooseneck, in-line preamplifier, and black finish. The microphone shall be resistant to RF interference from portable mobile and
handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21.1 mV/Pa. The microphone shall
offer the option to interchange cartridges with diverse polar pattern.
MX202W/C – The microphone shall be an electret condenser overhead microphone with a cardioid polar pattern, 10 cm gooseneck,
in-line preamplifier, and white finish. The microphone shall be resistant to RF interference from portable mobile and handheld
devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 17.8 mV/Pa. The microphone shall offer the
option to interchange cartridges with diverse polar pattern.
+10
dB
MX202B/N – The microphone shall be an electret condenser overhead microphone with no included cartridge, 10 cm gooseneck,
in-line preamplifier, and black finish. The microphone shall be resistant to RF interference from portable mobile and handheld
devices. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
+20
0
–10
-20
20
50 100
2
3 4 5 6 7 89
1000
Hz
MX202W/S – The microphone shall be an electret condenser overhead microphone with a supercardioid polar pattern, 10 cm
gooseneck, in-line preamplifier, and white finish. The microphone shall be resistant to RF interference from portable mobile and
handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21.1 mV/Pa. The microphone shall
offer the option to interchange cartridges with diverse polar pattern.
MX202W/N – The microphone shall be an electret condenser overhead microphone with no included cartridge, 10 cm gooseneck,
in-line preamplifier, and white finish. The microphone shall be resistant to RF interference from portable mobile and handheld
devices. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX202BP/C – The microphone shall be an electret condenser overhead microphone with a cardioid polar pattern, 10 cm gooseneck, a plate-mounted preamplifier, and black finish. The microphone shall be resistant to RF interference from portable mobile
and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 17.8 mV/Pa. The microphone
shall offer the option to interchange cartridges with diverse polar pattern.
MX202/S
MX202BP/S – The microphone shall be an electret condenser overhead microphone with a supercardioid polar pattern, 10 cm
gooseneck, a plate-mounted preamplifier, and black finish. The microphone shall be resistant to RF interference from portable
mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21.1 mV/Pa. The
microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX202BP/N – The microphone shall be an electret condenser overhead microphone with no included cartridge, 10 cm gooseneck,
a plate-mounted preamplifier, and black finish. The microphone shall be resistant to RF interference from portable mobile and
handheld devices. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX202WP/C – The microphone shall be an electret condenser overhead microphone with a cardioid polar pattern, 10 cm gooseneck, a plate-mounted preamplifier, and white finish. The microphone shall be resistant to RF interference from portable mobile
and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 17.8 mV/Pa. The microphone
shall offer the option to interchange cartridges with diverse polar pattern.
MX202WP/S – The microphone shall be an electret condenser overhead microphone with a supercardioid polar pattern, 10 cm gooseneck, a plate-mounted preamplifier, and white finish. The microphone shall be resistant to RF interference from portable
mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21.1 mV/Pa. The
microphone shall offer the option to interchange cartridges with diverse polar pattern.
MX202WP/N – The microphone shall be an electret condenser overhead microphone with no included cartridge, 10 cm gooseneck, a plate-mounted preamplifier, and white finish. The microphone shall be resistant to RF interference from portable mobile
and handheld devices. The microphone shall offer the option to interchange cartridges with diverse polar pattern.
www.shure.eu
MX202/N
with R183
Installed Microphones | Microflex | 13
MX391, MX392, MX393 Boundary Microphones
With slim design and superior audio reproduction, Microflex Boundary Microphones are the ideal conference room solution. Equipped with features like programmable,
silent membrane switches, interchangeable cartridges, logic inputs and outputs, and LED indicators, Microflex Boundary microphones provide high-quality sound for a wide
range of applications.
Specifications
Type
Condenser (electret bias)
Frequency Response
50 Hz – 17 kHz
Polar Pattern
MX391/C, MX392/C, MX393/C: Cardioid
MX391/S, MX392/S, MX393/S: Supercardioid
MX391/O, MX392/O, MX393/O: Omnidirectional
Output Impedance
EIA rated at 150 Ω (180 Ω actual)
Logic Connections
(MX392 Only)
LED IN: Active low (≤1.0 V), TTL compatible. Absolute maximum
voltage: -0.7 V to 50 V.
SWITCH OUT: Active low (≤0.5 V), sinks up to 20 mA, TTL compatible.
Absolute maximum voltage: -0.7 V to 50 V (up to 50 V through 3 kΩ).
Environmental Conditions
Operating temperature range: -18° C – 57° C
Relative Humidity: 0 – 95%
Power Requirements
11 – 52 Vdc phantom, 2.0 mA
MX391
MX392/MX393
Sensitivity
(at 1 kHz, open circuit voltage; 1 Pascal =
94 dB SPL); All settings -12 dB at 0 gain
(internal modification)
Cardioid -29.5 dB (33.5 mV)
Supercardioid -28.3 dB (38.5 mV)
Omnidirectional -21.8 dB (81.4 mV)
Cardioid: -27.5 dBV/Pa (42.2 mV)
Supercardioid: -26.5 dBV/Pa (47.3 mV)
Omnidirectional: -22.0 dBV/Pa (79.4 mV)
Maximum SPL
1 kHz at 1% THD, 1 kΩ load; All settings
+6 dB at 0 gain (internal modification)
Cardioid: 118.8 dB
Supercardioid: 117.5 dB
Omnidirectional: 110.7 dB
Cardioid: 117.0 dB
Supercardioid: 116.0 dB
Omnidirectional: 111.5 dB
Equivalent Output Noise A-weighted
Cardioid: 22.6 dB SPL
Supercardioid: 21.3 dB SPL
Omnidirectional: 14.5 dB SPL
Cardioid: 23.0 dB
Supercardioid: 22.0 dB
Omnidirectional: 17.5 dB
Signal-to-Noise Ratio
referenced at 94 dB SPL at 1 kHz
Cardioid: 71.4 dB
Supercardioid: 72.7 dB
Omnidirectional: 79.5 dB
Cardioid: 71.0 dB
Supercardioid: 72.0 dB
Omnidirectional: 76.5 dB
Dynamic Range 1 kΩ load at 1 kHz
96.2 dB
94.0 dB
Common Mode Rejection 10 Hz to 100 kHz
45 dB minimum, 10 Hz to 100 kHz
45 dB minimum, 10 Hz to 100 kHz
Preamplifier Output Clipping Level 1% THD
-6 dBV (0.5 V)
-6 dBV (0.5 V)
Polarity
Positive sound pressure on diaphragm
produces positive voltage on pin
2 relative to pin 3 of the preamplifier
XLR output
Positive sound pressure on diaphragm
produces positive voltage on pin 2
relative to pin 3 of output connector
(MX393) or red wire relative to black
wire (MX392).
MX391
Boundary microphone
MX392/ MX393
Boundary microphone
Available Models
The polar pattern of the cartridge is indicated by the model number suffix: C = Cardioid, O = Omnidirectional, S = Supercardioid
MX391/C, MX391/S, MX391/O
Black surface-mount microphone, attached 3.7 m cable terminated, 4-pin mini
connector, separate preamplifier
MX391W/C, MX391W/S, MX391W/O
White surface-mount microphone, attached 3.7 m cable terminated, 4-pin mini
connector, separate preamplifier
MX392/C, MX392/S, MX392/O
Surface-mount microphone, programmable membrane on/off switch,
logic input/output terminals, on/off indicator LED, screw terminal connections,
attached 3.7 m unterminated cable
MX393/C, MX393/S, MX393/O
Surface-mount microphone, programmable membrane on/off switch, on/off indicator LED,
miniature three pin connector, and detachable 3.7 m cable.
www.shure.eu
Installed Microphones | Microflex | 14
MX391, MX392, MX393 Boundary Microphones
Furnished Accessories
95B2313
Zipper bag
80A541
Switch paint mask (MX392/MX393)
80C514
Paint mask (MX392/MX393)
36A664
Paint plug (MX392/MX393)
RK100PK
In-line preamp (MX391/MX391W)
Optional Accessories and Replacement Parts
R183B
Omnidirectional cartridge for all Microflex models
C129
3,7 m cable 3-pin miniature connector (TA3F)
to male XLR (MX393)
R184B
Supercardioid cartridge for all Microflex models
C130
Custom-logic cable with threaded adapter
R185B
Cardioid cartridge for all Microflex models
15A525
Custom logic cable (specify length)
MX392/C
MX393/C
MX391/C
MX391/O
+20
+20
+10
0
dB
dB
+10
–10
–10
-20
20
0
50 100
2
3 4 5 6 7 89
1000
2
-20
3 4 5 6 7 89
10000 20000
20
Hz
50 100
2
3 4 5 6 7 89
1000
2
3 4 5 6 7 89
10000 20000
Hz
MX392/O
MX393/O
MX391/S
MX392/S
MX393/S
+20
dB
+10
0
–10
-20
20
50 100
2
3 4 5 6 7 89
1000
2
3 4 5 6 7 89
10000 20000
Hz
www.shure.eu
Installed Microphones | Microflex | 15
MX391, MX392, MX393 Boundary Microphones
Architectural Specifications
MX391/C – The microphone shall be a surface mounted, black electret condenser microphone with a cardioid polar pattern,
a 3.7 m cable terminated with a 4-pin mini connector, and in-line preamplifier. The microphone shall be resistant to RF interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be
33.5 mV/Pa.
MX391/S – The microphone shall be a surface mounted, black electret condenser microphone with a supercardioid polar pattern,
a 3.7 m cable terminated with a 4-pin mini connector, and in-line preamplifier. The microphone shall be resistant to RF interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be
38.5 mV/Pa.
MX391/O – The microphone shall be a surface mounted, black electret condenser microphone with an omnidirectional polar
pattern, a 3.7 m cable terminated with a 4-pin mini connector, and in-line preamplifier. The microphone shall be resistant to RF
interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity
shall be 81.4 mV/Pa.
MX391W/C – The microphone shall be a surface mounted, white electret condenser microphone with a cardioid polar pattern,
a 3.7 m cable terminated with a 4-pin mini connector, and in-line preamplifier. The microphone shall be resistant to RF interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be
33.5 mV/Pa.
MX391W/S – The microphone shall be a surface mounted, white electret condenser microphone with a supercardioid polar
pattern, a 3.7 m cable terminated with a 4-pin mini connector, and in-line preamplifier. The microphone shall be resistant to RF
interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity
shall be 38.5 mV/Pa.
MX391W/O – The microphone shall be a surface mounted, white electret condenser microphone with an omnidirectional polar
pattern, a 3.7 m cable terminated with a 4-pin mini connector, and in-line preamplifier. The microphone shall be resistant to RF
interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity
shall be 81.4 mV/Pa.
MX392/C – The microphone shall be a surface mounted, black electret condenser microphone with a cardioid polar pattern,
programmable membrane on/off switch, and logic controlled LED indicator. The microphone shall be resistant to RF interference
from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 42.2
mV/Pa.
MX392/S – The microphone shall be a surface mounted, black electret condenser microphone with a supercardioid polar pattern,
programmable membrane on/off switch, and logic controlled LED indicator. The microphone shall be resistant to RF interference
from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be
47.3 mV/Pa.
MX392/O – The microphone shall be a surface mounted, black electret condenser microphone with an omnidirectional polar
pattern, programmable membrane on/off switch, and logic controlled LED indicator. The microphone shall be resistant to RF
interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity
shall be 79.4 mV/Pa.
MX393/C – The microphone shall be a surface mounted, black electret condenser microphone with a cardioid polar pattern,
programmable membrane on/off switch with LED indicator. The microphone shall include a removable 3.7 m cable, connected
to the microphone through a TA3F connector and which terminates to a XLR connector. The microphone shall be resistant to RF
interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity
shall be 42.2 mV/Pa.
MX393/S – The microphone shall be a surface mounted, black electret condenser microphone with a supercardioid polar pattern,
programmable membrane on/off switch with LED indicator. The microphone shall include a removable 3.7 m cable, connected
to the microphone through a TA3F connector and which terminates to a XLR connector. The microphone shall be resistant to RF
interference from portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity
shall be 47.3 mV/Pa.
www.shure.eu
Installed Microphones | Microflex | 16
MX150 Subminiature Condenser Lavalier Microphone
The Shure Microflex MX150 is a professional subminiature electret condenser lavalier microphone ideal for use in speech and other
applications requiring low profile, discreet placement. Available with cardioid or omnidirectional patterns, the MX150 provides uncompromised sound quality and high reliability with minimal visibility for use in television broadcasting, corporate and educational
lectures, A/V teleconferencing, and sound reinforcement.
Features
• Available in cardioid or omnidirectional polar patterns and TQG/TA4F (for use in Shure bodypacks) or wired XLR variations
• CommShield® technology guards against interference from cellular RF devices and digital bodypack transmitters
• Matte black, sleek, low-profile, design for inconspicuous placement
• Multi-position tie clip allows for a variety of placement options and features an integrated cable management system
for convenient cable dress with minimized handling noise.
• Kevlar-reinforced soft-flex cable design further reduces handling noise while providing superior flexibility for routing and placement
• User-changeable equalization caps for response shaping (omnidirectional only)
• Snap-fit, concise windscreen provides protection from plosives and wind noise with minimal visibility
MX150 with tie clip
and windscreen
Available Models
MX150B/O-TQG
Microflex subminiature condenser lavalier microphone, omnidirectional, TQG connector
MX150B/C-TQG
Microflex subminiature condenser lavalier microphone, cardioid, TQG connector
MX150B/O-XLR
Microflex subminiature condenser lavalier microphone, omnidirectional, XLR connector
MX150B/C-XLR
Microflex subminiature condenser lavalier microphone, cardioid, XLR connector
150°
180°
120°
120°
Specifications
MX150/C
MX150/O
Transducer Type
Polar Pattern
Frequency Response
Output Impedance
Sensitivity
open circuit voltage, @ 1 kHz, typical
Maximum SPL
1 kHz at 1% THD, 2500 Ω Load
Signal-to-Noise Ratio
Electret condenser
Cardioid
20 – 20 kHz
TQG: N/A, XLR: 165.5 Ω
TQG: -51.0 dBV/Pa (3.0 mV)
XLR: -39.0 dBV/Pa (11.0 mV)
TQG: 147.5 dB SPL
XLR: 134.5 dB SPL
TQG: 57.5 dB
XLR: 57.0 dB
TQG: 2.0 dBV
XLR: 1.0 dBV
TQG: N/A
XLR: ≥60 dB
TQG: 111.0 dB SPL
XLR: 97.5 dB SPL
Electret condenser
Omnidirectional
20 – 20 kHz
TQG: N/A, XLR: 165.0 Ω
TQG: -46.5 dBV/Pa (4.5 mV)
XLR: -34.5 dBV/Pa (19.0 mV)
TQG: 143.0 dB SPL
XLR: 130 dB SPL
TQG: 60.0 dB
XLR: 59.5 dB
TQG: 2.0 dBV
XLR: 1.0 dBV
TQG: N/A
XLR: ≥60 dB
TQG: 109.0 dB SPL
XLR: 95.5 dB SPL
TQG: 36.5 dB
XLR: 37.0 dB
TQG: 34.0 dB
XLR: 34.5 dB
Clipping Level
1 kHz at 1% THD, 2500 Ω Load
Common Mode Rejection
20 Hz – 20 kHz
Dynamic Range
@ 1 kHz, 2500 Ω Load
Self Noise
equivalent SPL, A-weighted, typical
Operating Temperature Range
Polarity
150°
150°
90°
90°
60°
Cable Length
Weight
90°
90°
–20 dB
–15 dB
60°
60°
–10 dB
–5 dB
–5 dB
30°
0
30°
30°
0
250 Hz
2500 Hz
500 Hz
6400 Hz
1000 Hz
10000 Hz
150°
180°
150°
150°
120°
120°
90°
90°
90°
–20 dB
–15 dB
60°
–15 dB
60°
–10 dB
60°
–5 dB
30°
0
250 Hz
500 Hz
1000 Hz
MX150/C Polar Pattern
Accessories
WA150
Storage pouch for MX150
WA330
TQG/TA4F 4 pin connector
RK100PK
XLR preamp
1000 Hz
MX150/O Polar Pattern
20
20
0,6 m (2 ft.) from sound source
0,6 m (2 ft.) from sound source
15
10
10
5
5
0
dB
dB
15
-5
-10
Boost Cap
Normal Cap
0
-5
-10
-15
-15
-20
-20
-25
-25
-30
-30
20
100
1k
Hz
MX150/C Frequency Response
www.shure.eu
10k
20k
20
–10 dB
–5 dB
30°
100
1k
10k
180°
120°
–20 dB
-18°C to 57°C
-18°C to 57°C
TQG: Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1
XLR: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
TQG: 5 V DC (0.04 – 0.18 mA)
TQG: 5 V DC (0.04 – 0.18 mA)
XLR: 11-52 V DC phantom power (IEC-61938),
XLR: 11-52 V DC phantom power
< 2.2 mA
(IEC-61938), < 2.2 mA
1.52 m
1.52 m
TQG: 21 g
TQG: 21 g
XLR: 121 g
XLR: 121 g
Power Requirements
120°
–15 dB
60°
150°
120°
–20 dB
–10 dB
30°
180°
20k
Hz
MX150/O Frequency Response
Installed Microphones | Microflex | 17
30°
0
MX153 Earset Headworn Microphone
The Shure Microflex MX153 is a professional subminiature earset microphone ideal for speech and other applications requiring
low-profile discreet placement where improved gain before feedback over lavalier microphones is desired. Delivering exceptional
speech clarity, the MX153 is ideal for corporate and educational presentations, A/V conferencing and live sound reinforcement.
Available in three color options and direct TA4F connectivity to Shure bodypacks, the MX153 provides outstanding clarity in an
extremely comfortable, over the ear design.
Features
• Subminiature, omnidirectional cartridge offers superior speech clarity and enhanced plosive protection with no proximity effect
• Terminated with TQG/TA4F connector for direct connectivity to Shure wireless bodypack transmitters
• Ultra-lightweight, comfortable, flexible design is stable and easy to place over either ear
• CommShield® technology guards against interference from cellular RF devices and digital bodypack transmitters
• Kevlar reinforced, attached soft-flex cable
• Matte black, tan, and cocoa color options available
• Includes protective storage pouch, 3 windscreens, and collar clip
Available Models
MX153B/O-TQG
Microflex earset headworn condenser microphone, omnidirectional, TQG connector, black
MX153T/O-TQG
Microflex earset headworn condenser microphone, omnidirectional, TQG connector, tan
MX153C/O-TQG
Microflex earset headworn condenser microphone, omnidirectional, TQG connector, cocoa
Specifications
MX153
Transducer Type
Polar Pattern
Frequency Response
Output Impedance
Sensitivity
open circuit voltage, @ 1 kHz, typical
Maximum SPL
1 kHz at 1% THD
Electret condenser
Omnidirectional
20 Hz – 20 kHz
N/A
-41 dBV/Pa (9 mV)
Signal-to-Noise Ratio
Dynamic Range
@ 1 kHz
Common Mode Rejection
20 Hz – 20 kHz
Self Noise
equivalent SPL, A-weighted, typical
Operating Temperature Range
Polarity
Power Requirements
Weight
60 dB
2500 Ω load: 107 dB SPL
1000 Ω load: 107 dB SPL
2500 Ω load: 73 dB
1000 Ω load: 73 dB
N/A
34 dB
-18°C to 57°C
Positive pressure on diaphragm produces negative voltage on pin 3 with respect to pin 1
+1-5 V DC (500 μA maximum)
19.8 g
MX153 Earset
Headworn Microphone
Accessories
WA150
Storage pouch for MX150
WA330
TQG/TA4F 4 pin connector
RK100PK
XLR preamp
20
15
10
dB
5
0
-5
-10
-15
-20
20
100
1k
10k
20k
FREQUENCY (Hz)
www.shure.eu
Installed Microphones | Microflex | 18
MX183, MX184, MX185 Lavalier Microphones
Attached to a tie or lapel, Microflex Lavalier Microphones offer freedom of movement to any situation involving voice reproduction. As stylish as they are
convenient, Lavaliers are available in different directional patterns, come with multiple clip options, and are compatible with all Shure wireless platforms.
Specifications
Type
Condenser (electret bias)
Frequency Response
50 Hz – 17 kHz
Polar Pattern
MX183: Omnidirectional
MX184: Supercardioid
MX185: Cardioid
Output Impedance
EIA rated at 150 Ω (170 Ω actual)
Sensitivity
(at 1 kHz, open circuit voltage; 1 Pascal =
94 dB SPL; all settings -12 dB at 0 gain)
MX183: -27.5 dB (42.2 mV)
MX184: -33.5 dB (21.1 mV)
MX185: -35.4 dB (17.0 mV)
Maximum SPL
(1 kHz at 1% THD, 1 kΩ load;
all settings +6 dB at 0 gain)
MX183: 116.7 dB
MX184: 122.7 dB
MX185: 124.2 dB
Equivalent Output Noise A-weighted
MX183: 20.5 dB
MX184: 26.5 dB
MX185: 28.0 dB
Signal-to-Noise Ratio
referenced at 94 dB SPL at 1 kHz
MX183: 73.5 dB
MX184: 67.5 dB
MX185: 66.0 dB
Dynamic Range
1 kΩ load at 1 kHz
96.2 dB
100 dB at 0 gain (internal modification)
Common Mode Rejection
10 Hz to 100 kHz
45 dB minimum
Polarity
Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3
of output XLR connector.
Environmental Conditions
Operating temperature range: -18°– 57° C
Storage temperature range: -29° – 74° C
Power Requirements
11 – 52 Vdc phantom, 2.0 mA
Cable
Shielded 1.2 m cable terminated with a 4-pin female
mini connector (TA4F)
MX183/ MX184/ MX185
Lavalier microphone
)
Available Models
MX183
Omnidirectional, includes belt-clip preamp, rotatable tie clip, dual tie clip, snap-fit windscreen
MX184
Supercardioid, includes belt-clip preamp, rotatable tie clip, dual tie clip, snap-fit windscreen
MX185
Cardioid, includes belt-clip preamp, rotatable tie clip, dual tie clip, snap-fit windscreen
www.shure.eu
Installed Microphones | Microflex | 19
MX183, MX184, MX185 Lavalier Microphones
Furnished Accessories
26A13
Zipper bag
RK183T1
Tie clip
RK261BWS
Foam windscreen
RK183T2
Dual tie clip
RK183WS
Snap-fit windscreen
RK100PK
In-line preamp
80A67
Hex wrench #4
Optional Accessories and Replacement Parts
R183B
Omnidirectional cartridge
for all Microflex models
R184B
Supercardioid cartridge for all
Microflex models
R185B
Cardioid cartridge for all Microflex
models
MX1BP
Battery powered preamp
53A2133A
Belt clip for in-line preamp
WA333
4-pin female mini connector (TA4F)
C133
Replacement cable,
Microphone to preamp
Architectural Specifications
MX183 – The microphone shall be black electret condenser lavalier microphone with an omnidirectional polar pattern, in-line belt-clip
preamp, and 1.2 m cable that terminates with a 4-pin miniature (TA4F) connector. The microphone shall be resistant to RF interference from
portable mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 42.4 mV/Pa.
MX184 – The microphone shall be a black electret condenser lavalier microphone with a supercardioid polar pattern, in-line belt-clip preamp,
and 1.2 m cable that terminates with a 4-pin miniature (TA4F) connector. The microphone shall be resistant to RF interference from portable
mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 21.1 mV/Pa.
MX185 – The microphone shall be a black electret condenser lavalier microphone with a cardioid polar pattern, in-line belt-clip preamp, and
1.2 m cable that terminates with a 4-pin miniature (TA4F) connector. The microphone shall be resistant to RF interference from portable
mobile and handheld devices. The frequency response shall be 50 Hz to 17 kHz and the sensitivity shall be 17.0 mV/Pa.
MX183
MX184
+20
+20
+10
+10
dB
dB
MX185
0
–10
–10
-20
20
0
50 100
2
3 4 5 6 7 89
1000
2
3 4 5 6 7 89
10000 20000
Hz
Europe, Middle East, Africa:
Shure Europe GmbH
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: 49-7262-92490
Fax: 49-7262-9249114
Email: info@shure.de
-20
20
50 100
2
3 4 5 6 7 89
1000
Hz
United Kingdom, Ireland:
Shure Distribution UK
Unit 2 The I O Centre
Lea Road
Waltham Abbey EN9 1AS
United Kingdom
Phone: +44 (0) 1992 703058
Fax: +44 (0) 1992 703057
Email: info@shuredistribution.co.uk
www.shure.co.uk
www.shure.eu
www.shure.eu
© 2012 Shure Incorporated
Whilst every effort has been made to ensure that the information in this document is correct, we accept no liability in
respect of errors or omissions. All specifications within this document are subject to change without notice.
2
3 4 5 6 7 89
10000 20000