INFINITYt ICS MODEL 58MVC
DELUXE 4---WAY MULTIPOISE VARIABLE---SPEED
MULTI---STAGE CONDENSING GAS FURNACE
Series 100, Input Rates: 60,000 thru 120,000 Btuh
Product Data
IdealComfortt technology, the ultimate in
heating comfort . . .
A05069
The Carrier Infinityt ICS with IdealComfortt technology
achieves the optimum combination of comfort and efficency.
The Infinityt ICS achieves industry--leading ultra--high efficiency
at up to 95 percent Annual Fuel Utilization Efficiency (AFUE).
Efficient performance is enhanced through the variable--speed
design. To optimize heating performance,
IdealComfortt
automatically adjusts the heating level, maximizing the use of low
heating levels that produce near silent furnace operation while
meeting the exact heating needs. This unit is designed to keep the
indoor temperature within less than 1 degree of the thermostat
setpoint. Because it operates in low heat most of the time, the
Infinityt ICS uses up to 80% less power than single--capacity
furnaces.
In addition to providing ultimate comfort, the Infinityt ICS has a
sealed combustion system. This system brings combustion air to
the furnace and vents flue gases outside the furnace in a safe
manner. Because it is sealed, operational noise is minimal. A sealed
combustion system also means fewer cold drafts and less air
infiltration.
The Infinityt ICS is available in 5 heat/airflow combinations. The
unit has a 4--way multipoise design and can be installed in upflow,
downflow, or horizontal positions covering up to 20 different
applications. The Infinityt ICS can be vented as a Direct
vent/2--pipe furnace or as an optional ventilated combustion air
application.
The versatile 4--way multipoise design in conjunction with variable
speed makes the Infinityt ICS ideal for use with split system
cooling, including 2--speed units. A Carrier Infinityt air purifier,
humidifier, comfort ventilator, and Infinityt Zone control will
provide year round comfort and efficiency.
Designed for durability, comfort, and reliability, the Infinityt ICS
is the ultimate in versatile, efficient comfort.
Carrier Infinityr System — When the Infinityt ICS
variable--speed gas furnace is matched with the Infinityt Control
(--B release is compatible) and an air conditioner or heat pump, the
homeowner will experience the ultimate in IdealComfortt and
IdealHumidityt through unparalleled control of temperature,
humidity, indoor air quality, and zoning. The Carrier Infinityt
System also provides unprecedented ease of use through onscreen,
text--based service reminders and equipment malfunction alerts.
For even greater comfort and convenience, match the Infinityt
ICS furnace with an Infinity air conditioner or heat pump. This will
create a fully communicating system, requiring only 4 thermostat
wires between system components. In some cases, troubleshooting
can even be done from the outdoor unit without entering the home.
Optional remote access through telephone or Internet is also
available when combined with a remote connectivity kit.
1
INFINITYT ICS FEATURES / BENEFITS
58MVC
IdealHumidityt—The IdealHumidity system actively controls
both temperature and humidity in the home to provide the best
comfort all year long. Other systems depend on heating or cooling
demand to manage the moisture in the air. But, IdealHumidityt
gives the homeowner the right amount of humidity day and night,
even in mild weather. No other manufacturer can do this!
IdealHumidity saves energy, too. By keeping humidity under
control, the homeowner can set their thermostat to stay comfortable
and save energy—up to 20% off their cooling costs!
IdealComfortt—On the coldest days of the year, the Infinityt
ICS Furnace has the capacity to heat the home. On moderate days
when less heat is required, this furnace will regulate itself to a
lower capacity—providing a comfortable home and minimizing
operating costs.
The patented algorithm and the VariPhasetgas valve adjusts the
low heat operating time to match the indoor conditions.
Reliable Heat Exchanger Design—The primary heat exchanger is
made of aluminized steel for corrosion resistance. The patented
Serpentufft condensing heat exchanger cells are laminated with
polypropylene for greater resistance to corrosion and epoxy coated
externally to prevent oxidation. This break--through in heating
technology helps extend the life of the furnace for years of
dependable performance. The heat exchanger is positioned in the
furnace to extract additional heat. Stainless steel coupling box
componentry between heat exchangers has exceptional corrosion
resistance in natural gas and propane applications.
Power Heatt Igniter—Carrier’s unique SiN igniter is not only
physically robust but it is also electrically robust. It is capable of
running at line voltage and does not require complex voltage
regulators as do other brands. This unique feature further enhances
the reliability of Infinityt ICS gas furnace and continues Carrier’s
tradition of technology leadership and innovation in providing a
reliable and durable product.
ComfortFant—Improves comfort all year long by allowing
selection of the continuous fan speed right at the thermostat.
SmartEvapt—Allows the system to reduce summertime
humidity levels by nearly 10% over standard systems.
Media Filter Cabinet—Enhanced indoor air quality in the home
is made easier with our media filter cabinet—a standard accessory
on all deluxe furnaces. When installed as a part of the system, this
cabinet allows for easy and convenient addition of a Carrier high
efficiency air filter.
IdealComfortt Control Center—The microprocessor control
center features state--of--the--art combustion, temperature, and
airflow control to maximize comfort while operating at peak
efficiency.
Combustion control is obtained by taking the inducer motor RPM
reading when the medium--heat pressure switch makes. Using this
information, the microprocessor maintains a consistent air--to--fuel
ratio independent of vent sizing and conditions during all phases of
heat.
The first cycle after power reset provides 16 minutes of low heat
before switching to high heat unless the room thermostat has been
satisfied. Subsequent thermostat cycles provide anywhere from 0
to 16 minutes of low or medium heat depending on the length of
the previous thermostat cycle.
Airflow control is accomplished by the microprocessor and blower
motor. The ECM blower motor is configured by the
microprocessor to react to changes in the static load on the air
delivery system. The ECM blower uses this information to deliver
correct airflow independent of variations in system restrictions.
(For example, dirty filter or zone damper changes during a cycle.)
A special dehumidification function allows direct input from a
thermidistat or humidistat. This input adjusts system airflow for
greater humidity removal and increased cooling comfort during
summer months.
Direct Venting or Optional Ventilated Combustion Air —The
Infinityt ICS can be installed as a 2--pipe (Direct Vent) furnace or
as an optional ventilated combustion air application. This provides
added flexibility to meet diverse installation needs.
Electronic
Variable--Speed
Motors—ECM
Motors
(Electronically Commutated Motor) provide variable--speed
operation to optimize comfort levels in the home year round. They
are also more economical to operate than standard motors.
Sealed Combustion System—Infinityt ICS brings in
combustion air from outside the furnace, which results in especially
quiet operation.
Insulation—Foil--faced insulation in heat exchanger section of the
casing minimizes heat loss.
Insulated Blower Compartment—The acoustical insulation
reduces air and motor noise for quiet operation.
Monoport Burners—The burners are finely tuned for smooth,
quiet combustion and economical operation.
Bottom Closure—Factory--installed for side return; easily
removable for bottom return.
Blower Access Panel Switch—Automatically shuts off 115--v
power to furnace whenever blower access panel is opened.
Quality Registration—The Infinityt ICS is engineered and
manufactured under an ISO 9001 registered quality system.
Certifications—The Infinityt ICS, Model 58MVC units are
CSA. (A.G.A. and C.G.A.) design certified for use with natural and
propane gases. The furnace is factory--shipped for use with natural
gas. A C.S.A. listed gas conversion kit is required to convert
furnace for use with propane gas. The efficiency is GAMA
efficiency rating certified. The Infinityt ICS meets California Air
Quality Management District emission requirements.
2
FURNACE COMPONENTS
17
2
3
12
4
1
18
5
6
11
58MVC
5
15
14
13
16
7
9
19
8
10
A07609
NOTE:
S The 58MVC Furnace is built for use with natural gas. The furnace can be converted for propane gas with a factory--authorized and listed
accessory conversion kit.
S Control location and actual controls may be different than shown above.
11. Serpentufft secondary condensing heat exchanger (inside).
Wrings out more heat through condensation. Constructed
with polypropylene--laminated steel to ensure durability.
1. Combustion--air intake connection to ensure contaminant-free air (right or left side).
2. Burner sight glass for viewing burner flame.
12. Primary serpentine heat exchanger (inside). Stretches fuel
dollars with the S--shaped heat--flow design. Solid construction of corrosion--resistant aluminized steel means reliability.
3. Burner assembly (inside). Operates with energy--saving inshot burners and Power Heatt igniter for safe, dependable
heating.
13. Furnace control board.
4. VariPhaset multi--stage redundant valve assembly. Safe
and efficient. Features one primary gas control with two internal shutoff valves and a throttling valve.
14. 3--amp fuse provides electrical and component protection.
15. Light emitting diode (LED) on furnace control board.
Status code light is for diagnosing furnace operation and
service requirements.
5. Vent outlet. Uses PVC pipe to carry flue gas from the furnace’s combustion system (right or left side).
6. Inducer motor. Pulls hot flue gases through the heat exchangers, maintaining negative pressure for added safety.
16. Pressure switches ensure adequate flow of flue gas through
furnace and out vent system.
7. Blower access panel safety interlock switch.
17. Rollout switch (manual reset) to prevent overtemperature.
8. Air filter and retainer (location in furnace may vary).
18. Junction box for 115--v electrical power supply. (May be
located on right or left side)
9. Condensate drain connection. Collects moisture condensed
from burned gases for disposal into home drain system.
(Location in furnace varies.)
19. Transformer (24v) behind furnace control board provides
low--voltage power to furnace control board and thermostat.
10. Heavy--duty blower. Circulates air across the heat exchangers to transfer heat into the home.
3
MODEL NUMBER NOMENCLATURE
58MVC
060
F
100
Cooling Airflow
(400 CFM per 12,000 Btuh)
14 --- 1400 CFM
20--- 2000 CFM
Deluxe 4--- Way Multipoise
Variable--- Speed Direct--- Vent (2--- Pipe)
Multi--- stage Condensing Gas Furnace
58MVC
14
Series
Media Filter Cabinet included
Input Rates
060 --- 60,000 Btuh
080 --- 80,000 Btuh
100 --- 100,000 Btuh
120 --- 120,000 Btuh
CARRIER ACCESSORIES
UNIT SIZE
DESCRIPTION
PART NO.
060---14 080---14 080---20 100---20 120---20
Vent Termination Kit (Bracket Only for 2 Pipes)
2---in. — KGAVT0101BRA
3---in. — KGAVT0201BRA
X
X
X
X
X
Concentric Termination Kit (Single Exit)
2---in. — KGAVT0701CVT
3---in. — KGAVT0801CVT
X
X
X
X
X
Condensate Freeze Protection Kit
KGAHT0101CFP
X
X
X
X
X
Infinity Air Purifier
Model GAPA
X
X
X
X
X
Condensate Neutralizer Kit (obtained thru RCD)
P908---0001
X
X
X
X
X
Electronic Air Cleaner
Model EACB
X
X
X
X
X
Mechanical Air Cleaner
Model FILCAB or EZXCAB
X
X
X
X
X
Humidifier
Model HUM
X
X
X
X
X
Heat Recovery Ventilator
Model HRV
X
X
X
X
X
Energy Recovery Ventilator
Model ERV
X
X
X
X
X
UV Lights
Model UVL
X
X
X
X
X
EZ Flex Media Filter with end caps --- 16---in. (9 pack)
EXPXXLMC0016
X
EZ Flex Media Filter with end caps --- 20---in. (9 pack)
EXPXXLMC0020
X
X
X
EZ Flex Media Filter with end caps --- 24---in. (6 pack)
EXPXXLMC0024
Replacement EZ Flex Filter --- 16---in. (10 pack)
EXPXXFIL0016
Replacement EZ Flex Filter --- 20---in. (10 pack)
EXPXXFIL0020
Replacement EZ Flex Filter --- 24---in. (10 pack)
EXPXXFIL0024
Unframed Filter 3/4---in. — 16 x 25
KGAWF1301UFR
KGAWF1306UFR (6 pack)
Unframed Filter 3/4---in. — 24 x 25
KGAWF1501UFR
KGAWF1506UFR (6 pack)
4
X
X
X
X
X
X
X
S
S
S
X
CARRIER ACCESSORIES (CONTINUED)
UNIT SIZE
DESCRIPTION
PART NO.
Natural---To---Propane Gas Conversion Kit (Single Kit)*
KGANP4301STM
X
X
X
X
X
Propane---To---Natural Gas Conversion Kit (Single Kit)
KGAPN3601STM
X
X
X
X
X
ECM Motor Simulator (simulates the ECM motor to aid
troubleshooting
KGASD0301FMS
X
X
X
X
X
Door Gasket Kit
KGBAC0110DGK
X
X
X
X
X
Advanced Product Monitor (software and hardware to link
PC laptop to control board)
KGAFD0301APM
X
X
X
X
X
ECM Control Replacement Module --- 1/2 HP
HK44EA122
X
X
ECM Control Replacement Module --- 1 HP
HK52EA122
X
X
X
Gas Orifice Kit Size 42 (Qty 50)
KGAHA0150N42
Gas Orifice Kit Size 43 (Qty 50)
KGAHA0250N43
Gas Orifice Kit Size 44 (Qty 50)
KGAHA0350N44
Gas Orifice Kit Size 45 (Qty 50)
KGAHA0450N45
Gas Orifice Kit Size 46 (Qty 50)
KGAHA0550N46
Gas Orifice Kit Size 47 (Qty 50)
KGAHA1550N47
Gas Orifice Kit Size 48 (Qty 50)
KGAHA850N48
Gas Orifice Kit Size 54 (Qty 50)
KGAHA0850P54
Gas Orifice Kit Size 55 (Qty 50)
KGAHA0750P55
Gas Orifice Kit Size 56 (Qty 50)
KGAHA0850P56
Gas Orifice Kit Size 1.25mm (Qty 50)
KGAHA05750125
Gas Orifice Kit Size 1.30mm (Qty 50)
KGAHA5750130
* Factory ---authorized and field---installed. Gas conversion kits are CSA (AGA/CGA) recognized.
S 16 x 25 filters suitable for side return on all furnace sizes.
5
See Installation Instructions for model,
altitude, and heat value usages.
58MVC
060---14 080---14 080---20 100---20 120---20
THERMOSTAT AND ZONING CONTROL OPTIONS
NON---PROGRAMMABLE THERMOSTAT SELECTION
TC ---NAC or TP ---NAC
For use with 1 speed Air Conditioner --- _F/_C, Auto Changeover
TC ---NHC or TP ---NHC
For use with 1 speed Air Conditioner --- _F/_C, Auto Changeover
TP ---NRH*
For use with 2 speed Air Conditioner --- _F/_C, Auto Changeover
* Model HP & 2 Stage thermostat must be field converted to air conditioner operation.
58MVC
PROGRAMMABLE THERMOSTAT SELECTION
TP ---PAC
For use with 1 speed Air Conditioner --- _F/_C, Auto Changeover,
7 ---Day Programmable
TP ---PHP*
For use with 1 speed Heat Pump --- _F/_C, Auto Changeover,
7 ---Day Programmable
TP ---PRH*
For use with 2 speed Air Conditioner --- _F/_C, Auto Changeover,
7 ---Day Programmable
TB ---PAC
For use with 1 speed Air Conditioner --- _F/_C, Auto Changeover,
5 ---2 Programmable
TP ---PRH{
For use with two---stage applications --- _F/_C, Auto Changeover,
7 ---Day Programmable
TP ---PRH}
For multi ---use/stage configurations --- _F/_C, Auto Changeover
7 ---Day Programmable
SYSTXCCUID01 ---B
Infinityt user interface
* Model HP & 2 Stage thermostat must be field converted to air conditioner operation.
{ Hybrid Heat™ thermostat is used with furnace and heat pump application.
} Thermidistat can be configured for heating, cooling, and Hybrid Heat applications. It must be configured for each specific application.
ZONING CONTROL SELECTION
ZONECC3Z(AC/HP)01
WeatherMaker Two---Zone Kit
ZONECC2KIT01 ---B
Comfort Zone II---B 2 ---Zone Kit
ZONECC4KIT01 ---B
Comfort Zone II---B 4 ---Zone Kit
ZONECC8KIT01 ---B
Comfort Zone II---B 8 ---Zone Kit
SYSTXCCUIZ01 ---B
Infinity Zone User Interface
SYSTXCCRRS01
Infinity Remote Room Sensor
SYSTXCCSMS01
Infinity Smart Sensor
SYSTXCC4ZC01
Infinity 4 ---Zone Damper Control
6
MODEL PLUG
CONNECTOR
USER INTERFACE
OR ADVANCED
PRODUCT
MONITOR
CONNECTOR
CONTINUOUS FAN
(CF) AIRFLOW
SETUP SWITCHES
OAT
CONNECTOR
SW4 SETUP
SWITCHES
SW1 SETUP
SWITCHES AND
BLOWER OFFDELAY
ON/OFF
SWITCH
AIR CONDITIONING
(A/C) AIRFLOW
SETUP SWITCHES
HUMIDIFIER
TERMINAL (24-VAC
0.5 AMP MAX.
HIGH-HEAT
ADJUSTMENT
(UNDER CAP)
BURNER
ENCLOSURE
REFFERENCE
TAP
INLET
PRESSURE
TAP
ACRDJ – AIR
CONDITIONING
RELAY DISABLE
JUMPER
24-V THERMOSTAT
TERMINALS
FLASH
UPGRADE
CONNECTOR
(FACTORY
ONLY)
STATUS AND COMM
LED LIGHTS
PL3 – ECM BLOWER
HARNESS
CONNECTOR
BOARD SERIAL
NUMBER
115-VAC (L2) NEUTRAL
CONNECTIONS
MEDIUM-HEAT
ADJUSTMENT
(UNDER CAP)
EAC-1 TERMINAL
(115 -VAC 1.0 AMP MAX.)
PL1 – LOW VOLTAGE MAIN
HARNESS CONNECTOR
V12
SOFTWARE
VERSION
NUMBER
EXAMPLE:
HK42FZ022 3407
PART
NUMBER
115-VAC (L1) LINE
VOLTAGE CONNECTIONS
PL2 – HOT SURFACE
IGNITER & INDUCER
MOTOR CONNECTOR
LOW-HEAT
ADJUSTMENT
(UNDER CAP)
DATE
CODE
CONTROL CENTER
HEAT EXCHANGERS
A92505
A07422
GAS VALVE
MANIFOLD
PRESSURE
TAP
58MVC
3-AMP FUSE
TRANSFORMER 24-VAC
CONNECTIONS
A07280
______________________________________________________________________________________________________________
Downflow Subbase
Concentric Vent Kit
A93086
A concentric vent kit allows vent and combustion--air pipes to
terminate through a single exit in a roof or side wall. One pipe
runs inside the other allowing venting through the inner pipe and
combustion air to be drawn in through the outer pipe.
A88202
One base fits all furnace sizes. The base is designed to be installed
between the furnace and a combustible floor when no coil box is
used or when a coil box other than a Carrier cased coil is used. It is
CSA (A.G.A./C.G.A.) design certified for use with Carrier 58MVC
furnaces when installed in downflow applications.
7
HUMIDIFIER
Cleans the air of smoke, dirt, and
many pollens commonly found.
Saves decorating and cleaning
expenses by keeping carpets,
furniture and drapes cleaner.
By adding moisture to winter-dry
air, a Carrier Humidifier can often
improve comfort and keeps
woodwork, wallpaper, and pain in
better condition. Moisturizing
household air also helps to retain
normal body heat and provides
comfort at lower temperatures.
CONTROLS:
THERMOSTATS
AND ZONING
Available in programmable and
non-programmable models,
Carrier thermostats maintain a
constant, comfortable temperature level in the home.
For the ultimate in home comfort,
Carrier‘s 2-, 4- or 8-zone
systems allow temperature
control of individual “zones” of
the home. This is accomplished
through a series of electronic
dampers and remote rooom
sensors. The 4-zone system is
shown.
DE
C
ER
TIFIE
ENERGY/HEAT
RECOVERY
VENTILATOR
Carrier‘s energy or heat recovery
ventilators exhaust stale indoor
air and provide fresh outdoor air
to the home while minimizing
heat loss and humidity level.
Especially useful for today‘s
tighter constructed houses.
Energy recovery ventilator is
shown.
Always Ask For
S I GN
D
58MVC
ELECTRONIC OR
MECHANICAL
AIR CLEANER
CERTIFIED
Use of the AHRI Certified TM Mark indicates a
manufacturer’s participation in the program. For
verification of certification for individual products,
go to www.ahridirectory.org.
8
PHYSICAL DATA
060---14
1/2
7.7
Direct--- Drive Motor Hp (ECM)
Motor Full Load Amps
RPM (Nominal)—Speeds
Blower Wheel Diameter X Width (in.)
Filter Size (in.) Nominal A (Washable)
Shipping Weight (lb)
Limit Control
Heating Blower Control (Off Delay)
Burners (Monoport)
Gas Connection Size
Gas Valve (Redundant) Manufacturer
Minimum Inlet Pressure (in. wc)
Maximum Inlet Pressure (in. wc)
Ignition Device
10 X 7
(1) 16 X 25 X 1
170
3
UNIT SIZE
080---20
100---20
1
1
12.8
12.8
Variable 250 — 1300
11 X 10
11 X 10
11 X 10
(1) 20 X 25 X 1 (1) 20 X 25 X 1 (1) 20 X 25 X 1
182
204
203
SPST
Selectable 90, 120, 150, or 180 SEC Intervals
4
4
5
1/2--- in. NPT
White--- Rodgers
4.5 (Natural Gas)
13.6 (Natural Gas)
Hot Surface --- SiN
080---14
1/2
7.7
120---20
1
12.8
11 X 10
(1) 24 X 25 X 1
234
6
58MVC
DESCRIPTION
PERFORMANCE DATA
UNIT SIZE
CERTIFIED TEMP RISE RANGE (° F)
CERTIFIED EXT STATIC PRESSURE (ESP)
Low
Medium
High
060---14
35 --- 65
50 --- 80
35 --- 65
080---14
35 --- 65
50 --- 80
40 --- 70
080---20
35 --- 65
50 --- 80
35 --- 65
100---20
40 --- 70
50 --- 80
45 --- 75
120---20
35 --- 65
50 --- 80
45 --- 75
Heating
0.12
0.15
0.15
0.20
0.20
Cooling
0.50
0.50
0.50
0.50
0.50
410
(470**)
545
(625**)
1070
1400
22000
23000
21000
37000
36000
36000
56000
56000
56000
95.0
92.1
94.0
24000
39000
60000
540
(620**)
695
(800**)
1220
1375
30000
30000
30000
49000
49000
49000
74000
74000
74000
95.0
92.3
94.7
32000
52000
80000
525
(605**)
685
(790**)
1470
1975
30000
30000
30000
49000
49000
49000
74000
74000
74000
95.0
92.3
94.7
32000
52000
80000
660
(760**)
875
(1005**)
1510
1950
38000
38000
38000
61000
61000
61000
94000
94000
93000
95.0
93.5
95.0
40000
65000
100000
Heating Low
AIRFLOW CFM‡
Low
OUTPUT CAPACITY BTUH* (ICS)
Medium
High
AFUE%* Nonweatherized ICS
INPUT BTUH†
Heating Medium
Heating High
Cooling (Max)
Upflow
Downflow
Horizontal
Upflow
Downflow
Horizontal
Upflow
Downflow
Horizontal
Upflow
Downflow
Horizontal
Low
Medium
High
890 (1025**)
1095
(1260**)
1900
2060
46000
46000
45000
73000
73000
73000
112000
112000
112000
95.0
93.3
93.8
48000
78000
120000
* Capacity in accordance with U.S. Government DOE test procedures.
† Gas input ratings are certified for elevations to 2000 ft. In U.S.A., for elevations above 2000 ft, reduce ratings 2% for each 1000 ft above sea level.
In Canada, derate the unit 5% for elevations from 2000 to 4500 ft above sea level.
‡ Airflow shown is for bottom only return ---air supply with factory ---supplied 3/4 ---in. (76 mm) washable filter(s). For air delivery above 1800 CFM, see Air Delivery
Table for other options.
** Low--- and Medium ---heat CFM when low/medium heat rise adjustment switch (SW1 ---3) on furnace control is used.
9
AIR DELIVERY - CFM (BOTTOM RETURN WITH FILTER)
Unit Size
Operating Mode
060--- 14
{{ Low Heat
{{ Medium Heat
High Heat
{{ 1 ---1/2 ---Ton A/C Cooling
{{ 2 ---Ton A/C Cooling
2 ---1/2 ---Ton A/C Cooling
3 ---Ton A/C Cooling
3 ---1/2 ---Ton A/C Cooling
Maximum
080--- 14***
{{ Low Heat
{{ Medium Heat
High Heat
58MVC
{{ 1 ---1/2 ---Ton A/C Cooling
{{ 2 ---Ton A/C Cooling
2 ---1/2 ---Ton A/C Cooling
3 ---Ton A/C Cooling
3 ---1/2 ---Ton A/C Cooling
Maximum
080--- 20***
{{ Low Heat
{{ Medium Heat
High Heat
{{ 2 ---Ton A/C Cooling
{{ 2 ---1/2 ---Ton A/C Cooling
3 ---Ton A/C Cooling
3 ---1/2 ---Ton A/C Cooling
4 ---Ton A/C Cooling
5 ---Ton A/C Cooling
Maximum
100--- 20***
{{ Low Heat
{{ Medium Heat
High Heat
{{ 2 ---Ton A/C Cooling
{{ 2 ---1/2 ---Ton A/C Cooling
3 ---Ton A/C Cooling
3 ---1/2 ---Ton A/C Cooling
4 ---Ton A/C Cooling
5 ---Ton A/C Cooling
Maximum
120--- 20
CFM Airflow
External Static
Pressure
Range*
External Static Pressure (ESP)
0.1
0.2
0.3
0.4
0.5
410{
560{
1070{
525
700
875
1050
1225
1400
0 ---0.50
0 ---0.50
0 ---1.0
0 ---0.50}
0 ---0.50}
0 ---1.0}
0 ---1.0
0 ---1.0
0 ---1.0
410
545
1065
525
700
875
1050
1225
1400
410
560
1070
525
700
875
1050
1225
1400
410
560
1070
525
700
875
1050
1225
1400
410
560
1070
525
700
875
1050
1225
1400
405
560
1070
525
700
875
1050
1225
1400
540{
710{
1220{
525
700
875
1050
1225
1400
0 ---0.50
0 ---0.50
0 ---1.0
0 ---0.50}
0 ---0.50}
0 ---1.0}
0 ---1.0}
0 ---1.0}
0 ---1.0}
540
695
1220
515
685
830
1050
1225
1400
540
695
1220
495
680
840
1050
1225
1400
535
685
1220
490
670
850
1050
1225
1400
525
685
1220
475
665
860
1050
1225
1400
510
685
1220
465
665
860
1050
1225
1375
525{
705{
1470{
700
875
1050
1225
1400
1750
2000
0 ---0.50
0 ---0.50
0 ---1.0
0 ---0.50}
0 ---0.50}
0 ---1.0}
0 ---1.0}
0 ---1.0}
0 ---1.0
0 ---1.0
525
685
1470
670
870
1050
1225
1330
1750
2000
490
655
1470
640
875
1045
1225
1345
1750
2000
475
660
1470
635
865
1040
1225
1360
1750
2000
455
660
1470
630
865
1045
1225
1375
1750
2000
430
660
1470
630
865
1045
1225
1380
1750
1975
660{
890{
1510{
700
875
1050
1225
1400
1750
2000
0 ---0.50
0 ---0.50
0 ---1.0
0 ---0.50}
0 ---0.50}
0 ---1.0}
0 ---1.0}
0 ---1.0}
0 ---1.0
0 ---1.0
660
875
1510
700
835
1050
1170
1400
1735
1995
660
890
1510
690
845
1050
1190
1400
1740
1985
655
890
1510
690
855
1050
1205
1400
1735
1980
655
890
1510
690
860
1050
1220
1400
1735
1965
655
890
1510
690
865
1050
1225
1400
1725
1950
Setting
0.6
0.7
0.8
0.9
1.0
1070 1070 1065 1045 1015
875
875
875
860
840
1050 1050 1050 1050 1045
1225 1225 1225 1225 1205
1400 1400 1400 1380 1325
1220 1220 1220 1195 1150
855
840
830
825
820
1045 1040 1025 1015 1000
1225 1225 1225 1185 1140
1325 1280 1235 1190 1145
1470 1455 1450 1435 1420
1050
1225
1380
1750
1955
1050
1225
1380
1745
1920
1050
1225
1370
1725
1870
1045
1225
1365
1700
1820
1040
1225
1355
1685
1770
1500 1490 1480 1470 1455
1050
1225
1400
1720
1935
1050
1225
1400
1710
1910
1050
1225
1400
1695
1885
1050
1225
1400
1680
1860
1050
1225
1375
1660
1815
Low Heat
0 ---1.0
890{
890
890
890
880
885
890
885
885
875
860
Medium Heat
0 ---1.0
1130{
1095 1110 1120 1130 1125 1130 1130 1115 1110 1105
High Heat
0 ---1.0
1900{
1900 1900 1900 1900 1900 1885 1875 1860 1840 1815
0 ---0.50}
{{ 2 ---Ton A/C Cooling
700
700
700
700
700
695
0 ---0.50}
{{ 2 ---1/2 ---Ton A/C Cooling
875
870
875
875
865
870
3 ---Ton A/C Cooling
0 ---1.0}
1050
1025 1035 1045 1050 1050 1050 1050 1050 1040 1025
3 ---1/2 ---Ton A/C Cooling
0 ---1.0}
1225
1210 1210 1210 1225 1225 1225 1225 1225 1225 1225
4 ---Ton A/C Cooling
0 ---1.0}
1400
1385 1400 1400 1400 1400 1400 1400 1395 1375 1370
5 ---Ton A/C Cooling
0 ---1.0}
1750
1745 1730 1735 1735 1740 1735 1730 1725 1710 1685
6 ---Ton A/C Cooling
0 ---1.0
2100
2100 2100 2080 2065 2060 2045 2030 2000 1960 1895
Maximum
0 ---1.0
2100
2100 2100 2080 2065 2060 2045 2030 2000 1960 1895
*Actual external static pressure (ESP) can be determined by using the fan laws (CFM 2 proportional to ESP); such as, a system with 1750 CFM at 0.5 ESP would
operate at high ---heating airflow of 1470 CFM at 0.35 ESP, medium ---heating airflow of 705 CFM at 0.08 ESP and low---heating airflow of 525 CFM at 0.05 ESP.
{All heating CFM’s are when low/medium heat rise adjustment switch (SW1 ---3) and comfort/efficiency adjustment switch (SW1 ---4) are OFF.
}Ductwork must be sized for high ---heating CFM within the operational range of ESP.
{{ Operation within the blank areas of the chart is not recommended because high ---heat operation will be above 1.0 ESP.
***All airflows on 21” casing size furnaces are 5% less on side return only installations.
10
CONCENTRIC VENT (DIRECT VENT / 2--PIPE ONLY) (ALL MODEL SIZES)
B IN. (MM) DIA PVC
VENT/EXHAUST
F
E
C IN. (MM) DIA
13/16 (30 mm)
11/2
A
B IN. (MM) DIA PVC
INTAKE/COMBUSTION AIR
DIMENSIONS (IN / MM)
KIT PART NO.
KGAVT0701CVT
KGAVT0801CVT
A*
33--- 3/8 / 847.7
38--- 7/8 / 987.4
B
2 / 50.8
3 / 78.2
C
3--- 1/2 / 88.9
4--- 1/2 / 114.3
D{
16--- 5/8 / 422.3
21--- 1/8 / 536.6
E
6--- 1/4 / 158.8
7--- 3/8 / 189.3
F
5--- 3/4 / 146.1
6--- 1/2 / 165.1
* Dimension A will change proportionally as dimension D is lengthened or shortened.
{ Dimension D may be lengthened to 60 in. (1524 mm) maximum. Dimension D may also be shortened by cutting the pipes provided in the kit to 12 in. (304.8
mm) minimum.
A97110
CONDENSATE TRAP
FURNACE
DOOR
BLOWER SHELF
CONDENSATE
TRAP
CONDENSATE
TRAP (INSIDE)
FURNACE
DOOR
FURNACE
SIDE
4 7 8 124 mm
4
102 mm
FURNACE
SIDE
5 3 4 146 mm
5 3 4 146 mm
4
FIELD
DRAIN
CONN
ALTERNATE DRAIN
TUBE LOCATION
26 1 4 667 mm
26 1 4
11 2
667 mm
38 mm
SIDE VIEW
CONDENSATE TRAP
DRAIN TUBE LOCATION
FIELD
DRAIN
CONN
FRONT VIEW
END VIEW
SLOT FOR SCREW
HORIZONTAL
APPLICATION
(OPTIONAL)
FRONT VIEW
HORIZONTAL
APPLICATIONS
DOWNFLOW AND ALTERNATE
EXTERNAL UPFLOW APPLICATIONS
UPFLOW APPLICATIONS
3 4 19 mm
1/4 OD
COLLECTOR BOX TO
TRAP RELIEF PORT
1 1 2 38 mm
1/2 OD
INDUCER HOUSING
DRAIN CONNECTION
19 mm 3 4
5/8 OD
COLLECTOR BOX
DRAIN CONNECTION
71 8
181 mm
SCREW HOLE FOR
UPFLOW OR DOWNFLOW APPLICATIONS
(OPTIONAL)
13 4 45 mm
WIRE TIE
GUIDES
(WHEN USED)
FRONT VIEW
78
22 mm
21 4
57 mm
1/2-IN.
PVC OR CPVC
SIDE VIEW
A93026
11
58MVC
D
(38 mm)
14 1⁄2"
TYP
(368mm)
11⁄4" (32mm)
1"
(25mm)
12
12
26 15⁄16" TYP (684mm)
23 1⁄4" TYP (591mm)
SIDE INLET
SIDE INLET
DIA THERMOSTAT
ENTRY
(13mm)
22 11 ⁄16"
(576mm)
1⁄2-IN.
2-IN. VENT CONN
(51mm)
DIA
GAS CONN
(13mm)
1⁄2-IN.
26 15⁄16"
(684mm)
26 1⁄4"
(667mm)
24 1⁄2"
(666mm)
22 5⁄16"
(567mm)
2-IN. COMBUSTIONAIR CONN
(51mm)
UNIT SIZE
060---14
080---14
080---20
100---20
120---20
(17mm)
11 ⁄16"
E
INLET
OUTLET
D
(17mm)
11 ⁄16"
TYP
(14mm)
DIMPLE LOCATORS
FOR HORIZONTAL
HANGING
CONDENSATE
DRAIN LOCATION
(UPFLOW)
18 1⁄4"
(464mm)
30
(775mm)
1 ⁄2 "
CONDENSATE DRAIN
TRAP LOCATION
(DOWNFLOW &
HORIZONTAL RIGHT)
OR ALTERNATE
1⁄2
-IN. DIA GAS CONN
(21mm)
13⁄16"
9⁄16"
DIMENSIONS (IN / MM)
A
D
17---1/2 / 444.5
15---7/8 / 403.3
21 / 533.4
19---3/8 / 492.2
21 / 533.4
19---3/8 / 492.2
21 / 533.4
19---3/8 / 492.2
24---1/2 / 622.3
22---7/8 / 581.0
E
16 / 406.4
19---1/2 / 495.3
19---1/2 / 495.3
19---1/2 / 495.3
23 / 584.2
NOTES: 1. Minimum return-air openings at furnace, based on metal duct. If flex duct is used,
see flex duct manufacturer‘s recommendation for equivalent diameters.
2. Minimum return-air opening at furnace:
a. For 800 CFM 16-in . (406mm) round or 14 1 / 2 (368mm) x 12-in. (305mm) rectangle.
b. For 1200 CFM 20-in . (508mm) round or 14 1 / 2 (368mm) x 19 1/ 2-in. (495mm) rectangle.
c. For 1600 CFM 22-in .(559mm) round or 14 1 / 2 (368mm) x 23 1 / 4-in.(591mm) rectangle.
d. For airflow requirements above 1800 CFM, see Air Delivery table in Product Data
literature for specific use of single side inlets. The use of both side inlets, a
combination of 1 side and the bottom, or the bottom only will ensure adequate
return air openings for airflow requirements above 1800 CFM at 0.5“ W.C. ESP.
CONDENSATE
DRAIN LOCATION
(UPFLOW)
(21mm)
33 1⁄4"
TYP
(845mm)
30 13⁄16"
(783mm)
7⁄8-IN. DIA (22mm)
29 11 ⁄16"
TYP
ACCESSORY
(754mm)
POWER ENTRY
32 5⁄8"
27 5⁄8"
TYP
(702mm)
CONDENSATE
(829mm)
DRAIN TRAP
27 9⁄16"
LOCATION
TYP
(700mm)
(ALTERNATE
UPFLOW)
24 1⁄2"
(622mm)
17 5⁄16"
9 7⁄16"
(440mm)
TYP
(240mm)
DIA (22mm)
POWER CONN
7⁄8-IN.
CONDENSATE DRAIN
TRAP LOCATION
(DOWNFLOW &
HORIZONTAL LEFT)
13⁄16"
A
AIRFLOW
22 1⁄4" TYP
(565mm)
24 3⁄16"
BOTTOM INLET
(614mm)
SIDE INLET
22 11 ⁄16"
A05053
2-IN. VENT CONN
DIA
THERMOSTAT ENTRY
1⁄2-IN.
DIA
POWER CONN
7⁄8-IN.
DIA
GAS CONN
1⁄2-IN.
2-IN. COMBUSTIONAIR CONN
OUTLET
19" (483mm)
22 5⁄16" (567mm)
26 1⁄4" (667mm)
26 15⁄16" (694mm)
28 1⁄2" (724mm)
(16mm)
11 ⁄16"
(17mm)
7⁄16" (11mm)
1"
(25mm)
39 7⁄8"
(1013mm)
5⁄16"
(8mm)
5 ⁄8 "
13⁄16" (21mm)
DOWNFLOW SUBBASE
LOCATING
TAB
1 1/4″ TYP
PLENUM
OPENING
B
A
D
1
2
3
4
LOCATING
TAB
C
4
A97427
3
2
1
A88207
Assembled
Disassembled
DIMENSIONS (IN. / MM)
A
B
C
D
HOLE NO. FOR
WIDTH
ADJUSTMENT
Furnace with or without Cased
Coil Assembly or Coil Box
15 ---1/8 / 384.2
19 / 482.6
16 ---3/4 / 425.5
20 ---3/8 / 517.5
3
21 / 533.4
Furnace with or without Cased
Coil Assembly or Coil Box
18 ---5/8 / 396.4
19 / 482.6
20 ---1/4 / 514.4
20 ---3/8 / 517.5
2
24 ---1/2 / 622.3
Furnace with or without Cased
Coil Assembly or Coil Box
22 ---‘/8 / 562.0
19 / 482.6
23 ---3/4 / 603.3
20 ---3/8 / 517.5
1
FURNACE
CASING WIDTH
FURNACE IN DOWNFLOW
APPLICATION
17 ---1/2 / 444.5
PLENUM OPENING*
FLOOR OPENING
*The plenum should be constructed 1/4 ---in. smaller in width and depth than the plenum dimensions shown above.
MEDIA FILTER CABINET
25 5/8" (651mm)
23 5/8" (600mm)
24 3/8" (619mm)
Opening with Flanges Bent
23 3/8" (544mm)
23 1/8" (597mm)
Opening
B Opening
A
Furnace Side
Duct Side
23 3/4" (603mm)
Centerline Screw Slots
5 3/4"
(146mm)
A07803
DIMENSIONS (IN. / MM)
MEDIA FILTER CABINET
16 / 406.4
20 / 508.0
24 / 609.6
A
17 / 432.8
21 / 533.4
25 / 635.0
B
16 / 406.4
20 / 508
24 / 609.6
13
SHIPPED WITH SIZES
060--- 14
080--- 14, 080--- 20
100--- 20
58MVC
FACTORY-SUPPLIED
FIELD-INSTALLED
INSULATION
ELECTRICAL DATA
UNIT SIZE
UNIT VOLTS --- HERTZ --- PHASE
OPERATING VOLTAGE RANGE (Min --- Max)*
MAXIMUM UNIT AMPS
MINIMUM WIRE SIZE
MAXIMUM WIRE LENGTH (Ft)‡
MAXIMUM FUSE OR CKT BKR (Amps)**
TRANSFORMER (24v)
EXTERNAL CONTROL POWER AVAILABLE
060---14
080---14
8.96
14
30
15
8.96
14
30
15
Heating
Cooling
080---20
115 --- 60 --- 1
104 --- 127
14.06
12
31
20
40va
18va
34va
100---20
120---20
14.06
12
31
20
14.06
12
31
20
58MVC
*Permissible limits of the voltage range at which the unit will operate satisfactorily.
‡Length shown is as measured one way along wire path between unit and service panel for maximum 2% voltage drop.
**Time ---delay type is recommended.
TYPICAL WIRING SCHEMATIC
FIELD 24-VOLT WIRING
FIELD 115-, 208/230-, 460-VOLT WIRING
FACTORY 24-VOLT WIRING
FACTORY 115-VOLT WIRING
NOTE 2
W
FIVE
WIRE
C
Y
R
G
1-STAGE
THERMOSTAT
TERMINALS
FIELD-SUPPLIED
FUSED DISCONNECT
THREE-WIRE
HEATINGONLY
BLK
WHT
BLK
W2
WHT
COM
208/230- OR
460-VOLT
THREE
PHASE
W/W1
GND
115-VOLT FIELDSUPPLIED
FUSED
DISCONNECT
JUNCTION
BOX
CONTROL
BOX
Y/Y2
NOTE 1
R
GND
CONDENSING
UNIT
G
24-VOLT
TERMINAL
BLOCK
FURNACE
208/230VOLT
SINGLE
PHASE
NOTES: 1. Connect Y/Y2-terminal as shown for proper operation.
2. Some thermostats require a "C" terminal connection as shown.
3. If any of the original wire, as supplied, must be replaced, use
same type or equivalent wire.
A95236
14
MAXIMUM ALLOWABLE PIPE LENGTH (FT / M)
ALTITUDE
60,000
80,000
100,000
0 to 2000
ALTITUDE
60,000
80,000
100,000
2001 to
3000
120,000
UNIT SIZE
(BTUH)
ALTITUDE
100,000
3001 to
4000
120,000
UNIT SIZE
(BTUH)
ALTITUDE
60,000
80,000
100,000
4001 to
5000‡
120,000
UNIT SIZE
(BTUH)
ALTITUDE
60,000
80,000
100,000
Termination
Type
2 Pipe or 2--- In.
Concentric
2 Pipe or 2--- In.
Concentric
2 Pipe or 2--- In.
Concentric
2 Pipe or 3--- In.
Concentric
Termination
Type
2 Pipe or 2--- In.
Concentric
60,000
80,000
2 Pipe or 2--- In.
Concentric
2 Pipe or 2--- In.
Concentric
2 Pipe or 2--- In.
Concentric
2 Pipe or 3--- In.
Concentric
120,000
UNIT SIZE
(BTUH)
Direct Vent (2 ---Pipe Only)
Termination
Pipe Dia
Type
(IN.)*
5001 to
6000‡
120,000
*See notes on next page.
2 Pipe or 2--- In.
Concentric
2 Pipe or 2--- In.
Concentric
2 Pipe or 3--- In.
Concentric
Termination
Type
2 Pipe or 2--- In.
Concentric
2 Pipe or 2--- In.
Concentric
2 Pipe or 2--- In.
Concentric
2 Pipe or 3--- In.
Concentric
Termination
Type
2 Pipe or 2--- In.
Concentric
2 Pipe or 2--- In.
Concentric
2 Pipe or 2--- In.
Concentric
2 Pipe or 3--- In.
Concentric
NUMBER OF 90_ ELBOWS
1
2
3
4
5
6
50 / 15.2
70 / 21.3
30 / 9.14
70 / 21.3
45 / 13.7
70 / 21.3
10 / 3.0
45 / 13.7
70 / 21.3
25 / 7.6
70 / 21.3
40 / 12.9
70 / 21.3
NA
40 / 12.9
70 / 21.3
20 / 6.1
70 / 21.3
35 / 10.7
70 / 21.3
NA
35 / 10.7
70 / 21.3
15 / 4.6
70 / 21.3
30 / 9.1
70 / 21.3
NA
30 / 9.1
70 / 21.3
10 / 3.0
70 / 21.3
25 / 7.6
70 / 21.3
NA
25 / 7.6
70 / 21.3
5 / 1.5
70 / 21.3
20 / 6.1
70 / 21.3
NA
35 / 10.7
70 / 21.3
30 / 9.1
70 / 21.3
15 / 4.8
70 / 21.3
NA
70 / 21.3
NA
70 / 21.3
NA
70 / 21.3
Pipe Dia
(IN.)*
1
2
1--- 1/2
2
1--- 1/2
2
2
2--- 1/2
3 one disk
3 one disk†
45 / 13.7
70 / 21.3
26 / 7.9
70 / 21.3
40 / 12.2
70 / 21.3
31 / 9.4
63 / 19.2
40 / 12.9
70 / 21.3
21 / 6.4
70 / 21.3
35 / 10.7
70 / 21.3
26 / 7.9
62 / 18.9
35 / 10.7
70 / 21.3
16 / 4.9
70 / 21.3
30 / 9.1
70 / 21.3
12 / 3.7
62 / 18.9
30 / 9.14
70 / 21.3
11 / 3.4
70 / 21.3
25 / 7.6
70 / 21.3
NA
61 / 18.6
25 / 7.6
70 / 21.3
6 / 1.8
70 / 21.3
20 / 6.1
70 / 21.3
NA
61 / 18.6
20 / 6.1
70 / 21.3
NA
70 / 21.3
15 / 4.6
70 / 21.3
NA
61 / 18.6
Pipe Dia
(IN.)*
1
2
1--- 1/2
42 / 12.8
37 / 11.2
32 / 9.8
27 / 8.2
22 / 6.7
2
1--- 1/2
2
2
2--- 1/2
3 one disk
3 one disk†
70 / 21.3
25 / 7.6
70 / 21.3
38 / 11.6
70 / 21.3
29 / 8.8
59 / 18.0
70 / 21.3
20 / 6.1
70 / 21.3
33 / 10.1
70 / 21.3
24 / 7.3
59 / 18.0
70 / 21.3
15 / 4.6
70 / 21.3
28 / 8.5
70 / 21.3
10 / 3.0
58 / 17.8
70 / 21.3
10 / 3.0
70 / 21.3
23 / 7.0
70 / 21.3
NA
57 / 17.4
70 / 21.3
5 / 1.5
70 / 21.3
18 / 5.5
70 / 21.3
NA
57 / 17.4
17 / 5.2
70 / 21.3
NA
70 / 21.3
13 / 4.0
70 / 21.3
NA
56 / 17.0
Pipe Dia
(IN.)*
1
2
1--- 1/2
2
1--- 1/2
2
2
2--- 1/2
40 / 12.2
70 / 21.3
23 / 7.0
70 / 21.3
36 / 11.0
70 / 21.3
35 / 10.7
70 / 21.3
18 / 5.5
70 / 21.3
31 / 9.4
70 / 21.3
30 / 9.1
70 / 21.3
13 / 4.0
70 / 21.3
26 / 7.9
70 / 21.3
25 / 7.6
70 / 21.3
8 / 2.4
70 / 21.3
21 / 6.4
70 / 21.3
20 / 6.1
70 / 21.3
NA
70 / 21.3
16 / 4.8
70 / 21.3
15 / 9.6
70 / 21.3
NA
68 / 20.7
11 / 3.4
70 / 21.3
3 one disk†
56 / 17.1
55 / 16.8
54 / 16.5
53 / 6.2
52 / 15.8
52 / 15.8
Pipe Dia
(IN.)*
1
2
1--- 1/2
2
1--- 1/2
2
2
2--- 1/2
37 / 11.3
70 / 21.3
22 / 6.7
70 / 21.3
33 / 10
70 / 21.3
32 / 9.8
70 / 21.3
17 / 5.2
70 / 21.3
28 / 8.5
70 / 21.3
27 / 8.2
70 / 21.3
12 / 3.7
70 / 21.3
23 / 7.0
70 / 21.3
22 / 6.7
70 / 21.3
7 / 2.1
70 / 21.3
18 / 5.5
70 / 21.3
17 / 5.2
70 / 21.3
NA
68 / 20.7
13 / 4.0
70 / 21.3
12 / 3.7
70 / 21.3
NA
63 / 19.2
8 / 2.4
70 / 21.3
3 one disk†
53 / 16.2
52 / 15.8
50 / 15.2
49 / 14.9
48 / 14.6
47 / 14.3
1--- 1/2
2
1--- 1/2
2
2
2--- 1/2
2--- 1/2 one
disk
3 one disk
3 one disk†
15
NUMBER OF 90_ ELBOWS
3
4
5
NUMBER OF 90_ ELBOWS
3
4
5
NUMBER OF 90_ ELBOWS
3
4
5
NUMBER OF 90_ ELBOWS
3
4
5
6
6
6
6
58MVC
UNIT SIZE
(BTUH)
MAXIMUM ALLOWABLE PIPE LENGTH (FT / M) (CONTINUED)
ALTITUDE
UNIT SIZE
(BTUH)
60,000
6001 to 7000‡
80,000
100,000
120,000
ALTITUDE
UNIT SIZE
(BTUH)
58MVC
60,000
7001 to 8000‡
80,000
100,000
120,000
ALTITUDE
UNIT SIZE
(BTUH)
60,000
8001 to 9000‡
80,000
100,000
120,000
ALTITUDE
UNIT SIZE
(BTUH)
60,000
9001 to
10000‡
80,000
100,000
120,000
NUMBER OF 90_ ELBOWS
Direct Vent (2--Pipe Only)
Termination
Type
2 Pipe or 2--- In.
Concentric
2 Pipe or 2--- In.
Concentric
2 Pipe or 2--- In.
Concentric
2 Pipe or 3--- In.
Concentric
Termination
Type
2 Pipe or 2--- In.
Concentric
2 Pipe or 2--- In.
Concentric
2 Pipe or 2--- In.
Concentric
2 Pipe or 3--- In.
Concentric
Termination
Type
2 Pipe or 2--- In.
Concentric
2 Pipe or 2--- In.
Concentric
2 Pipe or 2--- In.
Concentric
2 Pipe or 3--- In.
Concentric
Termination
Type
2 Pipe or 2--- In.
Concentric
2 Pipe or 2--- In.
Concentric
2 Pipe or 2--- In.
Concentric
2 Pipe or 3--- In.
Concentric
Pipe Dia
(IN.)*
1--- 1/2
2
1--- 1/2
2
2
2--- 1/2
1
2
3
4
5
6
35 / 10.7
70 / 21.3
20 / 6.1
70 / 21.3
31 / 9.4
70 / 21.3
30 / 9.1
70 / 21.3
15 / 4.6
70 / 21.3
26 / 7.9
70 / 21.3
25 / 7.6
68 / 20.7
10 / 3.0
68 / 20.7
21 / 6.4
68 / 20.7
20 / 6.1
67 / 20.4
5 / 1.5
67 / 20.4
16 / 4.9
67 / 20.4
15 / 4.6
66 / 20.11
NA
62 / 18.9
11 / 3.4
66 / 20.1
10 / 3.0
64 / 19.5
NA
57 / 17.4
6 / 1.8
64 / 19.5
3 one disk†
49 / 14.9
48 / 14.6
47 / 14.3
45 / 13.7
44 / 13.4
43 / 13.1
Pipe Dia
(IN.)*
1--- 1/2
2
1--- 1/2
2
2
2--- 1/2
1
32 / 9.8
66 /20.1
18 / 5.5
66 / 20.1
29 / 8.8
66 / 20.1
NUMBER OF 90_ ELBOWS
2
3
4
5
27 / 8.2
22 / 6.7
17 / 5.2
12 / 3.7
65 / 19.8
63 / 19.2
62 / 18.9
60 / 18.3
13 / 4.0
8 / 2.4
NA
NA
65 / 19.8
63 / 19.2
62 / 18.9
57 / 17.4
24 / 7.3
19 / 5.8
14 / 4.3
9 / 2.7
65 / 19.8
63 / 19.2
62 / 18.9
60 / 18.3
6
7 / 2.1
59 / 18.0
NA
52 / 15.8
NA
59 / 18
3 one disk†
46 / 14.0
44 / 13.4
40 / 12.2
38 / 11.6
Pipe Dia
(IN.)*
1--- 1/2
2
1--- 1/2
2
2
2--- 1/2
1
30 / 9.1
62 / 18.9
17 / 5.2
62 / 18.9
27 / 8.2
62 / 18.9
2
25 / 7.6
60 / 17.8
12 / 3.1
60 / 18.3
22 / 6.7
60 / 18.3
NUMBER OF 90_ ELBOWS
3
4
5
20 / 6.1
15 / 4.6
10 / 3.0
58 / 17.7
56 / 17.1
55 / 16.8
7 / 2.1
NA
NA
58 / 17.7
56 / 17.1
51 / 15.5
17 / 5.2
12 / 3.7
7 / 2.1
58 / 17.7
56 / 17.1
55 / 16.8
6
5 / 1.5
53 / 16.2
NA
46 / 14.0
NA
53 / 16.2
3 one disk†
43 / 13.1
41 / 12.5
Pipe Dia
(IN.)*
1--- 1/2
2
1--- 1/2
2
2
2--- 1/2
1
27 / 8.2
57 / 17.4
15 / 4.6
57 / 17.4
24 / 7.3
57 / 17.4
2
22 / 6.7
55 / 16.8
10 / 3.0
55 / 16.8
19 / 5.8
55 / 16.8
3 one disk†
39 / 11.9
37 / 11.3
43 / 13.1
39 /11.9
41 / 12.5
35 / 10.7
34 / 10.4
NUMBER OF 90_ ELBOWS
3
4
5
17 / 5.2
12 / 3.7
7 / 2.1
53 / 16.2
51 / 15.5
49 / 14.9
5 / 1.5
NA
NA
53 / 16.2
51 / 15.5
46 / 14.0
14 / 4.3
9 / 2.7
NA
53 / 16.2
51 / 15.5
49 / 14.9
6
NA
47 / 14.3
NA
41 / 12.5
NA
47 / 14.3
35 / 10.7
37 / 11.3
33 / 10.1
31 / 9.5
29 / 8.8
* Disk usage ---Unless otherwise stated, use perforated disk assembly (factory ---supplied in loose parts bag).
{ Wide radius elbow.
} Vent sizing for Canadian installations over 4500 ft (1370m) above sea level are subject to acceptance by the local authorities having jurisdiction.
NA---Not Allowed; pressure switch will not make.
NOTES:
1. Do not use pipe size greater than those specified in table or incomplete combustion, flame disturbance, or flame sense lockout may occur.
2. Size both the combustion ---air and vent pipe independently, determine the smallest diameter allowed by the table for each pipe, then use the larger diameter for both pipes.
3. Assume two 45_ elbows equal one 90_ elbow. Long radius elbows are desirable and may be required in some cases.
4. Elbows and pipe sections within the furnace casing and at the vent termination should not be included in vent length or elbow count.
5. The minimum pipe length is 5 ft for all applications.
MAXIMUM ALLOWABLE EXPOSED VENT PIPE LENGTH (FT / M) WITH INSULATION IN
WINTER DESIGN TEMPERATURE AMBIENT*
UNIT SIZE
060---14
080---14
080---20
100---20
120---20
WINTER DESIGN
TEMPERATURE
20_F / --- 6.7_C
0_F / --- 17.8_C
--- 20_F / --- 28.9_C
20_F / --- 6.7_C
0_F / --- 17.8_C
--- 20_F / --- 28.9_C
20_F / --- 6.7_C
0_F / --- 17.8_C
--- 20_F / --- 28.9_C
20_F / --- 6.7_C
0_F / --- 17.8_C
--- 20_F / --- 28.9_C
MAXIMUM PIPE DI
DIAMETER (IN.)
2
2
2
2
2
2
2--- 1/2
2--- 1/2
2--- 1/2
3
3
3
0
30 / 9.1
16 / 4.9
9 / 2.7
37 / 11.2
20 / 6.1
11 / 3.4
41 / 12.5
21 / 6.4
11 / 3.4
49 / 14.9
26 / 7.9
15 / 4.6
INSULATION THICKNESS†
3/8
1/2
3/4
55 / 16.8
61 / 18.6
70 / 21.3
33 / 10.1
38 / 11.6
46 / 14.0
23 / 7.0
26 / 7.9
33 / 10.1
65 / 19.8
70 / 21.4
70 / 21.3
39 / 11.9
45 / 13.7
55 / 16.8
27 / 8.3
31 / 9.4
39 / 11.9
70 / 21.3
70 / 21.3
70 / 21.3
42 / 12.8
48 / 14.6
59 / 18.0
28 / 8.5
33 / 10.1
41 / 12.5
70 / 21.3
70 / 21.3
70 / 21.3
51 / 15.5
58 / 17.7
70 / 21.3
35 / 10.7
40 / 12.2
50 / 15.2
1
70 / 21.3
53 / 16.2
38 / 11.6
70 / 21.3
63 / 19.2
45 / 13.7
70 / 21.3
68 / 20.7
49 / 14.9
70 / 21.3
70 /21.3
59 / 18.0
* Pipe length (ft/m) specified for maximum pipe lengths located in unconditioned spaces. Pipes located in unconditioned space cannot exceed total allowable
pipe length as specified in Table.
†Insulation thickness based on R value of 3.5 per in.
16
58MVC
CLEARANCE TO COMBUSTIBLES
335122-201 REV. B LIT TOP
A08435
17
TYPICAL INSTALLATIONS
COMBUSTION AIR PIPE
OUTDOOR UNIT
VENT PIPE
A/C COIL
58MVC
HUMIDIFIER
GAS-FIRED
WATER HEATER
ELECTRONIC
AIR CLEANER
FRONT OF
FURNACE
AIRFLOW
A06511
Upflow Application
ELECTRONIC
AIR CLEANER
VENT
COMBUSTION
AIR (DIRECT VENT/
2 PIPE APPLICATION
HUMIDIFIER
OUTDOOR
UNIT
A/C COIL
AIRFLOW
FRONT OF
FURNACE
A07799
Downflow Application
18
TYPICAL INSTALLATIONS
COMBUSTION–AIR PIPE
DIRECT VENT/2-PIPE APPLICATION)
VENT PIPE
58MVC
OPTIONAL VENTILATED COMBUSTION
AIR APPLICATION
ELECTRONIC
AIR CLEANER
FRONT OF FURNACE
FURNACE
CONDENSATE
DRAIN
REFRIGERATION
PIPING
AIR CONDITIONING
COIL
AIRFLOW
A07800
Attic --- Horizontal Application
OPTIONAL VENTILATED
COMBUSTION AIR INTAKE
COMBUSTION– AIR PIPE
(DIRECT VENT/2-PIPE
APPLICATION)
VENT
PIPE
REFRIGERATION
PIPING
AIR CONDITIONING
COIL
ELECTRONIC
AIR CLEANER
AIRFLOW
FURNACE CONDENSATE
DRAIN
FRONT OF
FURNACE
Crawlspace --- Horizontal Application
19
A07801
GUIDE SPECIFICATIONS
General
Infinity ICS
Multi--Stage/Variable Speed Gas Furnace
System Description
Furnish a ______________________ 4--way multipoise gas--fired
condensing furnace for use with natural gas or propane (factory-authorized conversion kit required for propane); furnish cold air
return plenum; furnish external media cabinet for use with
accessory media filter or standard filter.
58MVC
Quality Assurance
Unit will be designed, tested and constructed to the current ANSI Z
21.47/CSA 2.3 design standard for gas--fired central furnaces.
Unit will be third party certified by CSA to the current ANSI Z
21.47/CSA 2.3 design standard for gas--fired central furnaces. Unit
will carry the CSA Blue StarR and Blue FlameR
labels. Unit
efficiency testing will be performed per the current DOE test
procedure as listed in the Federal Register.
Unit will be certified for capacity and efficiency and listed in the
latest AHRI Consumer’s Directory of Certified Efficiency Ratings.
Unit will carry the current Federal Trade Commission Energy
Guide efficiency label.
Delivery, Storage, and Handling
Unit will be shipped as single package only and is stored and
handled per unit manufacturer’s recommendations.
Warranty (for inclusion by specifying engineer)
U.S. and Canada only. Warranty certificate available upon request.
Equipment
Blower Wheel and ECM Blower Motor
Galvanized blower wheel shall be centrifugal type, statically and
dynamically balanced. Blower motor of ECM type shall be
permanently lubricated with sealed ball bearings, of _______hp,
and have infinitely variable speed from 250--1300 RPM operating
only when 24--VAC motor inputs are provided. Blower motor shall
be direct drive and soft mounted to the blower scroll to reduce
vibration transmission.
Filters
Furnace shall have reusable--type filters. Filter shall be ______ in.
(X) ________ in. An accessory highly efficient Media Filter is
available as an option. _____________ Media Filter.
Casing
Casing shall be of .030 in. thickness minimum, pre--painted
galvanized steel.
ECM Inducer Motor
ECM Inducer motor shall be variable speed design, soft mounted
to assembly to reduce vibration transmission.
Primary Heat Exchangers
Primary heat exchangers shall be 3--Pass 20 gauge corrosion-resistant aluminized steel of fold--and--crimp sectional design and
applied operating under negative pressure.
Secondary Heat Exchangers
Secondary heat exchangers shall be of a flow--through design
having a patented interior laminate coating of polypropylene for
greater corrosion resistance with fold--and--crimp design and
applied operating under negative pressure.
Controls
Controls shall include a micro--processor--based integrated
electronic control board with at least 16 service troubleshooting
codes displayed via diagnostic flashing LED light on the control, a
self--test feature that checks all major functions of the furnace, and
a replaceable automotive--type circuit protection fuse. Multiple
operational settings available, including separate blower speeds for
low heat, medium heat, high heat, low cooling, high cooling and
continuous fan. Continuous fan speed may be adjusted from the
thermostat. Cooling airflow will be selectable between 350 or 400
CFM per ton of air conditioning. Features will also include
temporary reduced airflow in the cooling mode for improved
dehumidification when an Infinity Control or Thermidistat is
selected as the thermostat.
Operating Characteristics
Heating capacity shall be _________________ Btuh input;
______________ Btuh output capacity.
Fuel Gas Efficiency shall be 92.1 to 95% AFUE.
Air delivery shall be ________________ cfm minimum at 0.50 in.
wc. external static pressure.
Dimensions shall be: depth_________in.; width __________in.;
height___________in. (casing only). Height shall be
_________in. with A/C coil and _________________in. overall
with plenum.
Electrical Requirements
Electrical supply shall be 115 volts, 60 Hz, single--phase (nominal).
Minimum wire size shall be ________AWG; maximum fuse size
of HACR--type designated circuit breaker shall be _________
amps.
Special Features
Refer to section of the product data identifying accessories and
descriptions for specific features and available enhancements.
Copyright 2010 Carrier Corp. S 7310 W. Morris St. S Indianapolis, IN 46231
Printed in U.S.A.
Edition Date: 09/10
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
20
Catalog No: 58MVC ---5PD
Replaces: 58MVC--- 4PD