Bissell Healthy Home Vacuum User`s guide

USER'S GUIDE
37E3 SERIES 220-240V
2
Thank You
3
Safety Instructions
4
Product View
5
Assembly
6-11
Operations
12
Maintenance and Care
13
Troubleshooting
14
Replacement Parts
14
Accessories
15
Warranty
16
Consumer Services
Thanks for buying a BISSELL Healthy Home Pet Clean™
We’re glad you purchased a BISSELL Healthy Home Pet Clean.
Everything we know about floor care went into the design and
construction of this complete, high-tech home cleaning system.
By purchasing this product you are helping BISSELL with our commitment to reducing our impact on the environment through an
expanding range of sustainable design efforts.
Your deep cleaner is well made, and we back it with a limited
two-year warranty. We also stand behind it with a knowledgeable,
dedicated Consumer Services department, so, should you ever have
a problem, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today,
BISSELL is a global leader in the design, manufacture, and service
of high quality homecare products like your Healthy Home Pet
Clean.
Mark J. Bissell
Chairman, President & CEO
2
www.bissell.com
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance,
basic precautions should be observed,
including the following:
■ Remove plug from electrical outlet before
Read all instructions
before using your
deep cleaner.
children) with reduced physical, sensory or
mental capabilities, or lack of experience
and knowledge, unless they have been
given supervision or instruction concerning
use of the appliance by a person responsible for their safety
Young children should be supervised to ensure
that they do not play with the appliance
Do not pick up toxic material (chlorine
bleach, ammonia, drain cleaner, petrol, etc.)
Do not modify the Earthed plug
Do not use for any purpose other than
described in this User’s Guide
Use only manufacturer’s recommended
attachments
Use only cleaning products formulated
by BISSELL for use in this appliance to
prevent internal component damage
Keep openings free of dust, lint, hair, etc.
Keep appliance on a level surface
Turn off all controls before unplugging
Be extra careful when cleaning stairs
Pay close attention when working
around children
Always connect to a properly Earthed
outlet. Unplug from outlet when not in use
and before conducting maintenance or
troubleshooting.
WARNING: To
reduce the risk of fire,
electric shock, or injury:
■Use indoors only
■Do not immerse; use only on surfaces
moistened by cleaning process
■Do not leave machine when it is plugged in
■Do not service machine when it is plugged in
■ If the supply cord is damaged, it must
■
■
■
■
■
■
■
■
■
■
■
be replaced by the manufacturer or its
service agent in order to avoid a hazard
Do not use machine if it has been
dropped, damaged, left outdoors or
dropped into water
Do not pull or carry by cord, use cord as a
handle, close door on cord, pull cord around
sharp corners or edges, run appliance over
cord, or expose cord to heated surfaces
Do not carry the appliance while in use
Do not unplug by pulling on cord;
unplug by grasping plug not the cord
Do not handle plug or appliance with
wet hands
Do not put any object into appliance openings,
use with blocked opening or restrict air flow
Do not expose hair, loose clothing, fingers
or body parts to openings or moving parts
Do not pick up hot or burning objects
Do not pick up flammable or combustible
materials (lighter fluid, petrol, kerosene,
etc.) or use in the presence of explosive
liquids or vapours
Do not use appliance in an enclosed space
filled with vapours given off by oil base
paint, paint thinner, some moth proofing
substances, flammable dust, or other
explosive or toxic vapours
Do not operate the appliance unless the
belt door is securely assembled in the
location provided
www.bissell.com
cleaning or maintaining the appliance
■ Not intended for use by persons (including
■
■
■
■
■
■
■
■
■
■
■
SAVE THESE
INSTRUCTIONS
FOR FUTURE USE
This model is for household use only.
This appliance
WARNING:
must be Earthed.
IMPORTANT
FOR OPERATION ON A 220-240 VOLT
A.C. 50/60 Hz POWER SUPPLY ONLY.
If your appliance is fitted with a
nonrewireable BS 1363 plug it must not be
used unless a 13 amp (ASTA approved to BS
1362) fuse is fitted in the carrier contained
in the plug. (Spares may be obtained from
your BISSELL supplier). If for any reason the
plug is cut off, it must be disposed of, as it is
an electric shock hazard should it be inserted
into a 13 amp socket.
3
Product view
Ergonomically
Designed
Handle™
Handle
Assembly
Upper Body
Assembly
Easy Carry
Handle
Lower Body
Assembly
Ready Tools™
Dial
Belt Access
Door
Removable
Nozzle
Edge Sweep™
Brushes
DirtLifter™
PowerBrush
WARNING:
To reduce the risk of fire and electric
shock due to internal component
damage,use only BISSELL cleaning
formulas intended for use with the
deep cleaner. Non-BISSELL cleaning
formulas may harm the machine
and void the warranty.
Cleaning fluid
Keep plenty of genuine BISSELL 2X advanced cleaning formula on hand so you can clean and
protect whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas.
Non-BISSELL cleaning formula may harm the machine and will void the warranty.
709 mL
BISSELL
2X Fibre
Cleansing
Advanced
Formula with
Scotchgard™
protector
#62E5-E
4
709 mL
BISSELL 2X
Multi-Allergen
Advanced
Formula with
Scotchgard™
protector
#89Q5-E
709 mL
BISSELL 2X
Pet Stain
& Odor
Advanced
Formula with
Scotchgard™
protector
#99K5-E
www.bissell.com
709 mL
BISSELL 2X
Natural
Orange
Advanced
Formula with
Scotchgard™
protector
#83P3-E
709 mL
BISSELL
2X Lavendar
Essence
Advanced
Formula with
Scotchgard™
protector
#34B5-E
473 mL
BISSELL 2X
Hard Floor
Solutions
#56L9-E
651 mL
BISSELL
Tough
Stain
Precleaner
#0400-E
Assembly
Your Healthy Home Pet Clean comes
in five easy to assemble components:
• Handle assembly
• Upper body assembly
• Upper hose rack
• Lower body assembly
• Lower hose rack
Three Phillips head screws are
included and can be found taped to
the handle assembly.
The only tool you will need to
assemble your cleaner is a Phillips
head screwdriver.
1. Slide upper body assembly onto lower
body and secure with two screws.
2. With the “tabs” on upper hose rack
pointing toward top of handle, attach
upper hose rack to handle assembly
by sliding it to top of handle until it
can go no further. Turn hose rack until
it snaps into place.
3. Slide handle assembly down into upper
body until it will go no further and
secure with screw.
Warning:
Do not plug in your cleaner
until you have completely assembled
it per the following instructions and
are familiar with all instructions and
operating procedures.
1.
2.
Tab
Upper Hose Rack
3.
4. Attach lower hose rack to back of
upper body by pushing into open slots
and sliding down until it snaps into
place.
5. Wrap flex hose around hose rack and
secure it into notched out holder as
shown.
4.
6. Keep flex hose locked in place with
hose secure latch.
6.
5.
Hose
Secure
Latch
Notch
www.bissell.com
5
Operations
Special features
Your BISSELL Healthy Home Pet Clean
is a home cleaning system that uses
a combination of hand hot tap water,
BISSELL advanced cleaning formula,
brush agitation and suction to safely
clean carpets.
DirtLifter™ Powerbrush
The DirtLifter PowerBrush is designed to
enhance cleaning performance. The bristle pattern safely lifts out the deep down dirt while
gently grooming carpet fibers. The floating
suspension self-adjusts to all carpet heights.
When the power is ON and the machine is in
the upright position, your carpet is protected
because the brushes are lifted up off the carpet.
ReadyTools™ Dial
The Ready Tools feature allows you to choose
between FLOOR CLEANING or cleaning with
TOOLS simply by turning the dial. The TOOLS
setting allows for above floor cleaning of
upholstery, stairs, creases along baseboards,
and other hard to reach areas. Simply choose
the tool that is appropriate for the job, attach to
flex hose and you are ready to go.
Measuring cup
Your deep cleaner is equipped with a measuring
cup for adding the proper amount of formula to
the 2-in-1 tank. For convenience the measuring
cup is built into the lid of the 2-in-1 tank.
2-in-1 water tank
Our 2-in-1 water tank system is designed with
a heavy duty bladder inside for clean water.
As you clean, the clean water in the bladder
will empty and mix with the cleaning formula.
Dirty water pulled out of your carpet will collect
around the outside of the bladder so clean and
dirty water are always kept separate. This allows
the user to maximize tank space, yet only carry
one tank to and from the sink for emptying and
filling.
Microban® antibacterial protection
Microban antibacterial protection helps prevent
the growth of harmful common household bacteria
including E. coli, Salmonella and Staph. a. It helps
to keep the unit fresher and cleaner between uses.
6
www.bissell.com
Warning:
To reduce the risk of fire, use only
BISSELL advanced deep cleaning
formula for full size machines in
your deep cleaner. Use of cleaning formulas that contain lemon
or pine oil may damage this
appliance and void the warranty.
Chemical spot cleaners or solventbased soil removers should not be
used. These products may react
with the plastic materials used in
your deep cleaner causing
cracking or pitting.
ReadyTools
Dial
Measuring Cup
Carry
Handle
ATTENTION:
Some Berber carpets have a tendency to
fuzz with wear. Repeated strokes in the
same area with an ordinary vacuum or
deep cleaner may aggravate this condition.
Operations
Special features continued
Scotchgard™ Protector
Carpet protection applied at the mill typically wears down over time from heavy foot
traffic and everyday cleaning, including
deep cleaning. To help restore this important protection, only BISSELL offers cleaning
formulas with Scotchgard protector. This
offers extra protection against dirt and
tough stains to keep your carpets looking
good longer.
To maintain your Scotchgard 5-year limited
stain warranty, you no longer are required
to hire a professional. By using your BISSELL
machine with BISSELL formulas
containing Scotchgard protector every 12
months, your carpet warranty from 3M
remains in effect. No other home deep
cleaning system can do this for you.
Before you clean
1. Plan activities to give your carpet time
to dry.
2. Move furniture to another area if
cleaning an entire room (optional).
3. Vacuum area with a dry vacuum
cleaner before deep cleaning.
EXIT
12
4. Plan your cleaning route to leave an exit
path. It is best to begin cleaning in the
corner farthest from your exit.
5. Pretreating (optional)
5
9
10
11
6
7
2
4
3
1
T
STARRE
HE
3'
4'
Pretreating is recommended to improve
cleaning effectiveness for heavily soiled carpet
in high traffic areas such as entry ways
and hallways.
To pretreat:
A. Using the BISSELL Tough Stain
Precleaner, generously spray
evenly over soiled area, do not
overwet.
B. Wait 3-5 minutes before deep
cleaning.
C. Clean as normal using your BISSELL
deep cleaner, following the
instructions below.
www.bissell.com
7
Operations
Fill the 2-in-1 water tank
1. Remove the tank from the base of the
machine by lifting the tank carry handle.
2. Carry like a bucket to the sink. Rotate
the handle forward to unlatch the lid.
Remove lid, turn over and locate built in
measuring cup.
1.
2.
3. Fill with BISSELL 2X formula to the
indicated fill line on the built in
measuring cup and pour into mouth
of the bladder.
3.
4
4. Fill the bladder with clean hand hot
tap water.
*Do not boil or microwave
water as it can destroy the
bladder.
5. Replace the top of the tank by
matching the lid and tank edges.
Handle must be in the forward position in order to replace lid. Rotate
the handle to the carrying position to
latch the lid.
Note: Remember to secure the lid
and test to make sure it is secure
before picking up the tank.
6. Place tank into machine base, seating
firmly in place. Rotate tank handle
back into latched position.
6.
5.
Tip:
Thorough vacuuming
before deep cleaning will
prevent early clogging of
the lint trap.
WARNING:
To reduce the risk of fire and electric
shock due to internal component
damage, use only BISSELL cleaning
formulas intended for use with the
deep cleaner. Non-BISSELL cleaning
formulas may harm the machine and
void the warranty.
8
www.bissell.com
Operations
Carpet cleaning
1. Plug the deep cleaner into a proper
outlet. Turn the power ON by pressing
the red power switch on the back of the
unit with your foot.
2. With your foot, press the gray handle
release lever located on the back of unit
below water tank.
Handle Release
Power Switch
3. While pressing the spray trigger, make
one slow forward wet pass and another
back. Let the BISSELL 2X advanced
deep cleaning formula and DirtLifter
PowerBrush do the work for you.
Caution: Do not overwet.
4. Release the spray trigger and make one
slow forward and backward pass over
the same area to remove any residual
dirty water and aid in drying.
5. Repeat cleaning passes until solution being pulled up appears clean.
Continue passes without pressing the
trigger until you can’t see any more
water being suctioned up.
Empty the 2-in-1 water tank/clean removable nozzle
1. Turn power switch OFF. Remove the 2-in-1
water tank from the base using the tank carry
handle. Carry the tank like a bucket to a
utility sink or outside where you will dispose
of the collection water. Remove the top of
the tank by rotating the handle forward to
unlatch lid and lifting lid off tank.
1.
2. Empty collection water from bottom of tank.
3.
2.
Lint Screen
4.
3. After each use, remove and rinse the lint
screen located on the tank lid.
4. If nozzle needs to be cleaned, remove by
grasping handle at the top and pulling forward. Clean removable nozzle by rinsing
under running water.
5. When finished, replace nozzle by slightly
raising front of machine to line up slots on
the base with the hooks on nozzle. Attach at
base first and then click nozzle into place.
5.
NOTE: If nozzle is not attached properly loss of suction will occur.
www.bissell.com
9
Operations
Empty the 2-in-1 water tank/clean removable nozzle continued
6. To continue carpet cleaning, refer back to
pages 8 through 9, beginning with “Fill
the 2-in-1 water tank” on page 8.
If cleaning is complete, refer to the
“Maintenance and care” section on
page 12.
Ready Tools™
bvh
g kvh
gh j j h
d b lg
fd hn l kl
sd jkn f h
Ad bj jh
b j
cv hh
gcg
Your Healthy Home Pet Clean comes
equipped with a hose and at least one
attachment for cleaning stairs, upholstery, and more.
Important! If using the machine
to clean upholstery, check upholstery tags.
1. Check manufacturer’s tag before cleaning.
“W” or “WS” on the tag means you can
use your deep cleaner. If the tag is coded
with “X” or “S” (with a diagonal strike
through), or says “Dry Clean Only,” do
not proceed. Do not use on velvet or silk. If
manufacturer’s tag is missing or not coded,
check with your furniture dealer.
2. Check for colourfastness in an
inconspicuous place.
3. If possible, check upholstery stuffing.
Coloured stuffing may bleed through fabric
when wet.
4. Plan activities to give upholstery time to dry.
5. Vacuum thoroughly to pick up loose debris
and pet hair. Use a vacuum with a brush
attachment and a crevice tool to clean in
fabric folds and tufts.
6. To begin cleaning with attachments, follow
the instructions on pages 7-8 for filling the
2-in-1 water tank.
7. Set the ReadyTools dial to the TOOLS setting. This will allow spray and suction from
the hose.
8. Attach the cleaning tool to the end of the
hose.
10
www.bissell.com
Manufacturer’s tag
Tip:
To clean with sliding
crevice tool, slide brushes
forward to clean stain, slide
back to suction
7.
Operations
Ready Tools™ continued
9. Clean by pressing the trigger to spray
solution onto the area to be cleaned. Slowly
move the tool back and forth over the soiled
surface. Release the trigger to suction dirty
water. Continue to clean in the area, working in small sections, until dirt is removed.
Caution: Do Not Overwet.
11.
10. When finished cleaning, remove and rinse
tool(s) in clean, running water.
11. It is recommended that you suction clean
water from a bowl to rinse out the hose.
12. Before wrapping hose onto tool rack, lift end
of hose and stretch out to ensure all water is
cleared from hose.
13. Wrap flex hose around tool rack.
14. Empty 2-in-1 water tank and rinse out,
following instructions on pages 9 through
10.
15. If the ReadyTools dial becomes difficult to
turn, the diverter assembly that holds the
dial may need to be cleaned. To clean,
first remove nozzle and locate screw that
holds the diverter assembly in place. With a
Phillips screwdriver, remove the screw and
set aside.
12.
Run water through here
16.
15.
Screw
16. Remove diverter assembly; hold under running water making sure water flows through
and around the dial. Turn the dial about 10
times clockwise and 10 more times counter
clockwise. This should free up any debris.
17. Wipe diverter assembly with a soft cloth and
replace back on machine. Replace nozzle.
18. Return ReadyTools dial to
FLOOR CLEANING setting.
www.bissell.com
11
Maintenance and care
Machine care
For best results, a few simple steps can
assure your machine is well maintained
after your cleaning is complete.
1. Turn power switch OFF. Unplug the machine
and wrap the power cord.
2. After emptying the 2-in-1 water tank, rinse
it with running hot tap water, taking care
to clean underneath and around the heavy
duty bladder. Clean out red lint screen.
Removable nozzle may be rinsed if necessary. Refer to page 9.
3. Replace the 2-in-1 water tank on the machine.
4. Any loose hair or debris can be pulled from
the brush roll and thrown away.
5. To clean attachments, remove from hose and
rinse in clean, running water. Dry before
storing. Clean the hose by suctioning clean
water from a bowl. Before wrapping back
on machine, lift end of hose and stretch out
to ensure all water is cleared from hose.
Refer to page 11, illustrations 11 and 12.
6. Wipe the machine’s exterior with a soft cloth.
7. After carpet is dry, vacuum again to remove
hair and fuzz.
Machine storage
Put the unit away in a closet or basement for the next use. Store cleaner in
a protected, dry area. Since this product
uses water, it must not be stored where
there is a danger of freezing. Freezing
will damage internal components and
void the warranty.
12
www.bissell.com
Troubleshooting
WARNING:
To reduce the risk of fire, electric shock or
injury, unplug from the outlet before servicing.
Reduced Spray OR No Spray
Possible causes
Remedies
1. Bladder may be empty
1. Turn power switch OFF; Refill bladder with clean hot tap water.
2. 2-in-1 tank may not be seated properly.
2. Turn power switch OFF; remove tank and reseat tanks.
3. Pump may have lost prime.
3. Turn power switch OFF; after 1 minute turn ON and depress spray release trigger.
4. The pump belt may be broken.
B.
A.
4. Turn power switch OFF and unplug from the outlet. To check if a pump belt has broken, you will need a flat head screwdriver. Slots Pump Belt DirtLifter PowerBrush Does Not Turn
Possible causes
1. The brush belt or pump belt is off or broken.
Cleaner Not Picking Up Solution
Possible cause
1. ReadyTools dial may be on the wrong setting
A. Insert the blade end into the slot of the belt access door to release. Examine the belt for breakage. You should be able to see the pump belt looped around the motor shaft. If it is broken or missing, please refer to Replacement Parts on page 14. A replacement belt may be ordered by calling BISSELL Consumer Services Complete installation instructions will accompany the replacement belt. B. When replacing belt access door be sure to line up slots of belt access door with slots in machine,
slide door into place and snap shut.
Remedies
1. Refer to Remedy 4 above to check if brush
belt or pump belt is broken.
Remedies
1. Set ReadyTools dial to either FLOOR CLEANING or
TOOLS.for the cleaning job.
2. Poor tool position. (Hand held attachments only).
2. Adjust angle; apply more downward pressure.
3.
3.
Removable nozzle may not be properly attached.
Make sure nozzle is on correctly by slightly raising
front of machine to line up slots on the base of the machine with the hooks on nozzle. Attach at base first and then click nozzle into place. Refer to image 5 on page 9.
4. 2-in-1 tank lid is not properly installed.
4. Re-install lid; refer to the image on page 8.
5. 2-in-1 tank is not properly seated.
5. 2-in-1 tank must be firmly seated to function;
remove and reseat 2-in-1 tank.
6. 2-in-1 tank has picked up maximum dirty water.
6. Empty 2-in-1 tank and refill, refer to the Operation section.
7. The lint screen may be clogged
7. Clean out lint screen. Refer to page 9.
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
www.bissell.com
13
Replacement parts
Item
1
2
3
4
5
6
1
Part No.
203-0104
203-0102
203-0124
215-0628
015-0621
203-0105
Part Name
Tank Assembly Complete
Tank Base
Removable Nozzle
Replacement Pump Belt (with instructions)
Replacement Brush Belt (with instructions)
Lint Screen
2
3
5
4
6
Accessories
While not all of these parts may not have come with your machine, all are
available to you for purchase, if desired.
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
1
Part No.
203-0149
203-6651
203-6653
203-6654
203-6652
203-0116
203-6655
210-3040
62E5-E
89Q5-E
99K5-E
83P3-E
34B5-E
56L9-E
0400-E
2
Part Name
Hard Floor Tool
3" Tough Stain Tool
4" Upholstery Tool
6" Stair Tool
Powered TurboBrush Hand Tool
Spraying, Sliding Crevice tool w/ Brush
Spraying Crevice Tool
Mesh Tool Storage Bag
709 mL BISSELL 2X Fibre Cleansing Advanced Formula
709 mL BISSELL 2X Multi-Allergen Advanced Formula
709 mL BISSELL 2X Pet Stain & Odor Advanced Formula
709 mL BISSELL 2X Natural Orange Advanced Formula
709 mL BISSELL 2X Lavender Essence Advanced Formula
473 mL BISSELL 2X Hard Floor Solutions
651 mL Tough Stain Precleaner
3
4
10
7
8
9
13
14
15
14
www.bissell.com
5
11
6
12
Warranty - BISSELL Healthy Home Pet Clean™
This warranty gives you specific legal rights, and you may also have other rights which may
vary from country to country. If you need additional instruction regarding this warranty or have
questions regarding what it may cover, please contact BISSELL Consumer Services by
telephone, or regular post as described below, or contact your local in country distributor.
Limited Two Year Warranty
Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, BISSELL Homecare, Inc.,
will replace (with new or remanufactured components), at BISSELL’s option, free of charge
from the date of purchase by the original purchaser, for two years any defective or
malfunctioning part do to manufacturers defect.
This warranty applies to product used for personal, and not commercial or rental service. This
warranty does not apply to fans or routine maintenance components such as filters, belts, or
brushes. Damage or malfunction caused by negligence, abuse, or use not in accordance with
the User’s Guide is not covered.
For UK inquiries:
Monday - Thursday 9 am — 5 pm
Friday
9 am — 4 pm
BISSELL Homecare (Overseas)
The Boat Yard
105 Straight Road
Old Windsor
Berkshire, SL4 2SE
United Kingdom
Telephone: 0844-888-6644
For all other inquiries:
Monday - Friday 8 am — 4 pm
BISSELL Homecare, Inc.
PO Box 1888
Grand Rapids, Michigan 49501 USA
Telephone: 01-616-453-4451
Fax: 01-616-453-1383
BISSELL HOMECARE INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL
DAMAGES OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT.
BISSELL’S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT.
*EXCEPTIONS AND EXCLUSIONS FROM THE TERMS OF THE LIMITED WARRANTY
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER WARRANTIES EITHER ORAL OR
WRITTEN. ANY IMPLIED WARRANTIES WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED TO THE TWO YEAR DURATION FROM THE DATE OF PURCHASE AS DESCRIBED ABOVE.
www.bissell.com
15
BISSELL consumer services
If your BISSELL product should require service:
Call BISSELL Consumer Services at the numbers below and we will give you the location of a
BISSELL Authorized Service Center in your area. If you have questions about your warranty or
need replacement parts please contact the numbers below.
For UK inquiries:
Monday - Thursday 9 am — 5 pm
Friday
9 am — 4 pm
BISSELL Homecare (Overseas)
The Boat Yard
105 Straight Road
Old Windsor
Berkshire, SL4 2SE
United Kingdom
Telephone: 0844-888-6644
For all other inquiries:
Monday - Friday 8 am — 4 pm
BISSELL Homecare, Inc.
PO Box 1888
Grand Rapids, Michigan 49501 USA
Telephone: 01-616-453-4451
Fax: 01-616-453-1383
Or visit the BISSELL website - www.bissell.com
When contacting BISSELL, have model number of cleaner available.
Please record your Model Number: ___________________
Please record your Purchase Date: ___________________
NOTE: Please keep your original sales receipt. It
provides proof of purchase date in the event of a
warranty claim. See Warranty on page 15 for details.
16
www.bissell.com
©2010 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved. Printed in China
Part Number 120-4290
Rev 10/10
Visit our website at:
www.bissell.com
Scotchgard is a trademark of 3M
Microban® is a registered trademark
of Microban Products Company