WATER SAMPLING
& MONITORING
SURFACE WATER
SAMPLING & MONITORING
Water Level Loggers
Open Water Sampler
Nets
Automatic Sampler
Drum & Tank Sampler
Peristaltic Pump
Open Water Monitoring Accessories
Water Flow Probe
1
Water Level Loggers
WATER SAMPLING
& MONITORING
In-Situ Level TROLL
Level TROLL 300
Level & Temp Dataloggers
Simple, reliable and economical. Ideally suited for nonvented long-term level and/or pressure monitoring.
The Level TROLL® contains
everything needed for monitoring
level/pressure and temperature all
in one design. There are three data
logging instruments to choose from
(Level TROLL 700, 500 or 300) and
all are manufactured for accuracy,
ruggedness and easy usability. You
can have total confidence whatever
your application when using Level
TROLL® products.
Level TROLL 500
Highly accurate, reliable, and affordable. Ideally suited
for long-term level and/or pressure monitoring. Fresh
or marine.
Level TROLL 700
Our top-of-the-line unit. Powerful and flexible
level monitoring. Optimized for multi-step aquifer
testing, precision level monitoring, and research.
BaroTROLL
Barometric Pressure logger
The BaroTROLL® is used to measure
and log barometric pressure and
temperature changes. It can be used
by itself or together with a nonvented (absolute) Level TROLL® to
compensate the level readings for
fluctuations in barometric pressure
where vented cable cannot be used.
Level TROLL 300, 500 or 700
+
Required range
+
Cable or Suspension Wire
+
Download/Communications
2
Level TROLL 700
Ordering Information
Level TROLL 500
Flexible Communications
The Level TROLL 300, 500 and 700
instruments feature Modbus (RS485),
SDI-12 and 4-20mA outputs. Connect
each of these units to a SCADA or PLC
system.
BaroTROLL
Rugged and Reliable
All Level TROLL sensors are designed
for use in many applications. Deploy
316 stainless steel (300) and titanium
(500, 700) sensors into most types of
environmental waters.
Level TROLL 300
Superior Accuracy and
Performance
In-Situ® uses the newest sensor
technologies. All instruments
undergo an extensive full-scale
calibration procedure for both
pressure and temperature.
In-Situ Level TROLL - Applications
Application
Level TROLL 300
(316 SS)
Aquifer characterization
Economical, long-term monitoring in fresh
water
Level TROLL 500
(Titanium)
Level TROLL 700
(Titanium)
Recommended
cable type
O
X
Vented
X
High-accuracy, long-term monitoring in
brackish, saltwater or fresh water
Suspension wire
X
O
Vented
X
O
Vented or non-vented
Storm water monitoring
X
O
Vented
Tide/harbor fluctuations monitoring
O
X
Vented
Wetlands/estuaries monitoring
X
O
Vented or non-vented
Lake and reservoir monitoring
O
River and stream gauging
O
X
O
Vented or non-vented
Crest stage gauging
X
O
O
Non-vented or
suspension wire
Flood and storm surge monitoring
X
O
O
Non-vented or
suspension wire
Dewatering
O
X
O
Vented or non-vented
Landfill monitoring groundwater
X
O
O
Non-vented
O
X
O
Vented or non-vented
O
X
O
Vented or non-vented
Municipal and process monitoring
Real-time monitoring via telemetry
WATER SAMPLING
& MONITORING
Water Level Loggers
X = Recommended, O = Can also be used
Win-Situ® Software
Win-Situ® 5.0 takes a fresh new
approach to monitoring instrument
control software with a large, easy
to read display, icon based buttons
and friendly wizards. The basic
functions are Home (real-time data
view), Logging, Calibration, Setup,
and MyData--are organised by five
large tabs at the top of the screen.
When connected, the unit type and
serial are displayed on every screen.
A dashboard includes the time of
the instrument along with battery
and memory gauges.
Data logging setup has never
been easier with our new setup
Wizard. The Logging Setup Wizard
guides every step, including setting
reference points and display
modes, to ensure error free logging
configuration.
With such easy software, you’ll
spend more time getting data and
less time reading manuals!
3
Water Level Loggers
WATER SAMPLING
& MONITORING
Level TROLL Accessories
Twist-Lock Hanger
Introducing the New
RuggedReader®. Collect, store,
analyze and transfer data using
this ultra-rugged, multi-purpose,
hand-held PC. When coupled
with any of In-Situ’s TROLL® Water
Quality or Level instruments, the
RuggedReader® delivers a reliable,
easy-to-use data management
system that will stand up to the
harshest conditions. Improved
smart battery, faster processing
speed, a more flexible interface
and the latest Microsoft®
operating system make the new
RuggedReader® a must have.
The Twist-Lock Hanger is a
combination backshell cap and
hanger to anchor a pre-programmed
BaroTROLL® or non-vented
(absolute) Level TROLL® in a well
or other site while taking data. No
communication capabilities. No
venting. Allows use of inexpensive
hanging cable.
Features
• Rugged Construction
• IP-67 rating
• Lightweight and easy to hold
• Easy-to-use keypad
• User-Accessible Expansion
• Large, High-Contrast Display
• Powerful Win-Situ® Software
Twist-Lock Cable
Surprisingly simple and incredibly
reliable. Just press together and twist
until they lock! Twist-Lock cables
are available vented or non-vented
with rugged titanium connectors
(2 year warranty). Select between
polyurethane, FEP or halogen-free
cable jackets that are custom length
up to 1212m. All Twist-Lock Cables
include a Kellems® grip for easy
suspension. (Level TROLL 300, 500,
700)
TROLL Cable Extender
The TROLL cable extender is a
titanium adapter for joining two
lengths of Level TROLL® Rugged
deployment cable. Twist-Lock
connectors mate with mating
connectors on cable so you can take
two cables and Twist-Lock them
together. The TROLL® Cable Extender
seals the cables and provides a
weight bearing connection.
Kellems® Clip
Twist-Lock Cable
Twist-Lock Hanger
TROLL Cable Extender
4
Rugged Reader
TROLL LINK Telemetry
Flexible and economical TROLL® Link
Telemetry Systems offer reliable data
retrieval from remote locations.
TROLL Link Telemetry Systems provide:
•Satellite or cellular options that
guarantee communication from nearly
any location.
•Faster data access at a lower total cost
than other data retrieval methods.
•Full compatibility with Level TROLL®
300, 500, 700, Aqua TROLL® 200 or
TROLL® 9500 instruments.
•User-defined configuration options for
monitoring and alarming.
•A solar-powered option to eliminate
on-site power supply.
•Remote access to instruments using
Win-Situ® Plus software
Level TROLL Specifications
Level TROLL 300
Operational Temp. Range
Storage Temperature
Diameter, OD
Length
Weight
Output Options
Level TROLL 500
Level TROLL 700
-20°C to 80°C
-40°C to 80°C
20.82mm
22.9cm
0.24kg
Modbus (RS485)
SDI-12, 4-20mA
Stainless Steel
Black Delrin®
3.6V lithium
5 yrs or 2M readings*
Direct Read or Wire
8-36VDC
1MB
50,000
1 per sec
-20°C to 80°C
-40°C to 80°C
18.3mm
21.6cm
0.197kg
Modbus (RS485)
SDI-12, 4-20mA
Titanium
Black Delrin®
3.6V lithium
5 yrs or 2M readings*
Direct Read or Wire
8-36VDC
2MB
100,000
2 per sec
-20°C to 80°C
-40°C to 80°C
18.3mm
21.6cm
0.197kg
Modbus (RS485)
SDI-12, 4-20mA
Titanium
Black Delrin®
3.6V lithium
5 yrs or 2M readings*
Direct Read or Wire
8-36VDC
4MB
350,000
4 per sec
2 per sec
2 per sec
2 per sec
Linear, Fast Linear, Event
2 per sec
2 per sec
2 per sec
Linear, Fast Linear, Event
Silicon strain gauge
Stainless steel
Silicon strain gauge
Titanium
2 per sec
2 per sec
2 per sec
Linear, Fast Linear, Linear
Average, Step Linear, Event,
and True Logarithmic
Silicon strain gauge
Titanium
+/-0.1% @ 15°C
+/- 0.1% over calibrated
temperature range
+/- 0.01% or better
Non-Vented***
(30 psia) 0-35ft (10.5m)
(100 psia) 0-200ft (60m)
(300 psia) 0-650ft (200m)
+/-0.05% @ 15°C
+/- 0.1% over calibrated
temperature range
+/- 0.005% or better
Non-Vented***
(30 psia) 0-35ft (10.5m)
(100 psia) 0-200ft (60m)
(300 psia) 0-650ft (200m)
(500 psia) 0-1100ft (340m
Vented
(5 psig) 0-11.5ft (3.5m)
(15 psig) 0-35ft (11m)
(30 psig) 0-70ft (21m)
(100 psig) 0-230ft (70m)
(300 psig) 0-700ft (210m)
(500 psig) 0-1150ft (350m)
Burst Pressure
Maximum 2X range
Burst 3X range
Maximum 2X range
Burst 3X range
Units of Measure – Pressure
Psi, kPa, bar, mbar, mmHg,
inHg, cmH2O, and inH2O
m, mm, cm, in, ft
0°C to 50°C
+/- 0.3°C
0.1°C
Fahrenheit, Celsius
Psi, kPa, bar, mbar, mmHg,
inHg, cmH2O, and inH2O
m, mm, cm, in, ft
-5°C to 50°C
+/- 0.1°C
0.01°
Fahrenheit, Celsius
Housing Material
Nose Cone Material
Internal Battery
Battery Life
Cable Connect
External Power
Memory
Data Records**
Fastest Logging Rate
Fastest Output Rate
Modbus
SDI-12
4-20 mA Update Rate
Measurement Types
Pressure Sensor
Sensor Material
Sensor Accuracy
Full Scale
Sensor Resolution
Sensor Ranges Available
Units of Measure – Level
Calibrated Temperature
Temperature Accuracy
Temperature Resolution
Units of Measure
WATER SAMPLING
& MONITORING
Water Level Loggers
+/- 0.05% @ 15°C
+/- 0.1% over calibrated
temperature range
+/- 0.005% or better
Non-Vented***
(30 psia) 0-35ft (10.5m)
(100 psia) 0-200ft (60m)
(300 psia) 0-650ft (200m)
(500 psia) 0-1100ft (340m)
Vented
(5 psig) 0-11.5ft (3.5m)
(15 psig) 0-35ft (11m)
(30 psig) 0-70ft (21m)
(100 psig) 0-230ft (70m)
(300 psig) 0-700ft (210m)
(500 psig) 0-1150ft (350m)
Maximum 2X range
Burst 3X range
Psi, kPa, bar, mbar, mmHg,
inHg, cmH2O, and inH2O
m, mm, cm, in, ft
-5°C to 50°C
+/- 0.1°C
0.01°
Fahrenheit, Celsius
* 1 reading = time and date plus all available parameters polled or logged from device
** Data records = one reading with time stamp
*** Recommended for Baro TROLL® and Baro TROLL® 100 for post correcting non-vented instruments
5
WATER SAMPLING
& MONITORING
Innovations in
Water Monitoring
Rugged TROLL® 100 and 200 Instruments
The Rugged TROLL 100 and 200 instruments are designed for
long- and short-term groundwater and surface-water monitoring.
The non-vented (absolute) instruments monitor and record
changes in water level, pressure, and temperature. Use with a
Rugged BaroTROLL® for optimum accuracy. All instruments are
compatible with the user-friendly Win-Situ® 5 or Win-Situ® Mobile
software platform for programming and data retrieval.
Affordable Titanium Data Loggers
s
s
Use instruments in harsh environments – Titanium
construction offers chemical- and corrosion-resistance.
Customize data logs for your application – Linear, fast linear,
and event logging modes are available.
Simplified Setup and Data Retrieval
s
s
Program and download data from a Rugged TROLL 100/200 or
Rugged BaroTROLL with the Rugged TROLL® docking station.
Communicate with a deployed Rugged TROLL 200 by using
the low-cost Rugged TROLL® Com device, which connects
to either a RuggedReader® handheld PC or a desktop/
laptop computer.
Flexible Deployment Options
s
s
s
Use suspension wire with hanger for long-term deployments
requiring minimal instrument access (for all instruments).
Use direct-read cable with the Rugged TROLL 200 or Rugged
BaroTROLL for applications requiring real-time data access.
Access data when you need it — The Rugged TROLL 200 or
Rugged BaroTROLL can be connected to a TROLL® Link telemetry
system or SCADA system via Modbus/RS485 or SDI-12.
Applications
s
s
s
s
s
6
Coastal wetland and estuary research
Crest stage gaging
Drilling and well development
Flood and storm surge monitoring
Landfill monitoring
Rugged TROLL 100 & 200
Rugged BaroTROLL®
Temperature ranges
Operational: 32-122° F (0-50° C)
Storage: -40-176° F (-40-80° C)
Calibrated: 32-122° F (0-50° C)
Operational: 32-122° F (0-50° C)
Storage: -40-176° F (-40-80° C)
Calibrated: 32-122° F (0-50° C)
Diameter
1.03 in (2.62 cm)
1.03 in (2.62 cm)
Length
5.68 in (14.43 cm)
5.68 in (14.43 cm)
Weight
0.37 lb (170 g)
0.37 lb (170 g)
Materials
Rugged TROLL® 200 Cable
Titanium body; Delrin® nose cone,
hanger, backend
Titanium body; Delrin nose cone,
hanger, backend
Output options
Rugged TROLL 100: USB or
RS232 via docking station
Rugged TROLL 200: USB or
RS232 via docking station;
Modbus/RS485 or SDI-12 via
Rugged TROLL 200 cable
USB or RS232 via docking station;
Modbus/RS485 or SDI-12 via
Rugged TROLL 200 cable
Battery type & life
3.6V lithium; 5 years or 2M readings1
3.6V lithium; 5 years or 2M readings1
Use the non-vented Rugged TROLL 200 cable to access a Rugged TROLL
200 or Rugged BaroTROLL. Use the Rugged TROLL 200 cable suspension
kit to anchor the cable in place. The following configurations are available:
s Modbus/RS485 stripped and tinned cable or SDI-12 stripped
and tinned cable — Use with PLC, telemetry system, or logger
s Modbus/RS485 top-of-well cable — Use with Rugged TROLL
Com and laptop PC or RuggedReader® handheld PC
External power
Rugged TROLL 100: NA
Rugged TROLL 200: 8-36 VDC
8-36 VDC
Jacket options
TPU (thermoplastic polyurethane)
Measurement current
14 mA typical
14 mA typical
Conductors
4 conductors, 24 AWG, polypropylene insulation
Cable: 0.200 in (5.1 mm)
Connector: 1.03 in (26.1 mm)
Use the economical, titanium Rugged BaroTROLL instrument with
either a Rugged TROLL 100 or 200 instrument. Win-Situ Baro Merge™
software simplifies post-correction of non-vented water level data.
Sleep current
20 µA typical
20 µA typical
Memory
Data records2
Data logs
1.0 MB
65,000
Rugged TROLL 100: 1 log
Rugged TROLL 200: 2 logs
1.0 MB
65,000
2 logs
Minimum bend radius
5X cable diameter
Break strength
150 lb (68 kg)
Fastest logging rate
1 per second
1 per minute
Fastest output rate
Rugged TROLL 200 only
Modbus & SDI-12: 1 per second
Modbus & SDI-12: 1 per second
Log types
Linear, Fast Linear, and Event
Linear
Sensor Type/Material
Piezoresistive; Ceramic
Piezoresistive; Ceramic
Range
30 ft (9.0 m) (Burst: 60 ft)
100 ft (30 m) (Burst: 134 ft)
250 ft (76 m) (Burst: 368 ft)
7.0 to 30.0 psi; 0.5 to 2 bar
Typical ±0.1% full scale (FS)
Typical ±0.1% FS
Accuracy (FS)
±0.3% FS max.3
±0.3% FS max.3
Resolution
±0.01% FS or better
±0.01% FS or better
Units of measure
Pressure: psi, kPa, bar, mbar, mmHg
Level: in, ft, mm, cm, m
Pressure: psi, kPa, bar, mbar,
mmHg, inHg
Temperature Sensor
Silicon
Silicon
Range
Calibrated: 32-122° F (0-50° C)
Calibrated: 32-122° F (0-50° C)
Rugged TROLL® Com Communication Device
Use the Rugged TROLL Com device for communication between a
cabled Rugged TROLL 200 or Rugged BaroTROLL instrument and
a RuggedReader handheld PC or a desktop/laptop computer. The
Rugged TROLL Com communicates via Modbus/RS485.
Operating temp. range
-4-122° F (0-50° C)
Storage temp. range
-40-176° F (-40-80° C)
Materials
Delrin, rubber, copper pins
Environmental rating
IP67 with battery cover closed
Dimensions (LxWxH)
3.5 x 1.14 x 1.88 in (8.9 x 2.9 x 4.8 cm)
Input connection
Modbus/RS485
Output connection
Available with either USB or RS232
Power source
9V alkaline battery, user-replaceable
Cable
Black polyurethane, 3 ft (91 cm) long
Accuracy
±0.3° C
±0.3° C
Resolution
0.01° C or better
0.01° C or better
Units of measure
Rugged TROLL® Docking Station
Fahrenheit, Celsius
Fahrenheit, Celsius
Warranty
1 year
1 year
Use the docking station to program and download data from the
Rugged TROLL 100 or 200 or from the Rugged BaroTROLL. The
docking station is available with either a USB or RS232 communication
interface. USB communication allows fast data transfer to a PC. The
RS232 version is used with a PC or a RuggedReader handheld PC.
Battery life guaranteed when used within the factory-calibrated temperature range.
1 record = date/time plus 2 parameters logged (no wrapping) from device within the factory-calibrated
temperature range.
3
Across factory-calibrated temperature range.
Specifications are subject to change without notice. Delrin is a registered trademark of E.I. du Pont de Nemours & Co.
2
Rugged BaroTROLL Instrument
Diameter
Accuracy @ 15° C
1
Accessories
General
WATER SAMPLING
& MONITORING
Rugged TROLL® 100 and 200 Instruments
7
Open Water Sampler
WATER SAMPLING
& MONITORING
Swing Sampler
Long Handled Dipper
Bomb Samplers
Features a polyethylene fixed cup
with pouring spout. Samples are
taken using a ladling action, and
poured from the dippers’ sampling
cup into you own sample bottles.
Nickel-Plated Brass
Bomb Sampler
Manufactured from brass and
bronze, then nickel plated, these
samplers are designed to extract
samples from drums, tanks, tank
cars, wells and ponds.
Long Handled
Take a liquid sample in a
replaceable bottle
Sample from different angles up
to 90o. Use the Swing Sampler as
a standard dipper with the bottle
upright, or swing the bottle 90o to
sample in hard to reach areas such
as sewers and other horizontal
flows.
The pivoting head is attached to
a sturdy 1.3m fibreglass pole that
extends to 2.4m, providing greater
flexibility for all situations.
Choose from two versions
1) Free swinging head (1000ml) head swings free due to gravity and always remains vertical.
2) Rotatable head (500ml) head rotates by hand but remains in postion by a friction grip.
1) Free Swinging
Head Swing
Sampler
EEQB226390
2) Rotatable Head
Swing Sampler
EEQESS500
Features
• 500ml poly cup with pouring spout
• Extendable pole, fiberglass and aluminium
• Extends from 1.3 to 2.4 m
Fixed Head Dipper
EEQEDP500
Ordering Information
EEKESS100 Swing Sampler with 1000ml
bottle, free rotating head
EEQESS500 Swing sampler with 500ml bottle, rotatable head
EEQEDP500 Dipper with 500ml screw on poly cup fixed head,
BMEF36786 Replacement 500ml dipper cup for EDP500 sampler
NAL2104-0016 500ml HDPE Bottle
NAL2104-0032 1000ml HDPE Bottle
The plunger assembly will be
activated automatically when the
sampler contacts a hard surface
such as the bottom of a tank, or it
may be activated by the operator at
various depths with the use of a pull
line. This feature allows samples to
be taken at random depths. When
raised, the plunger automatically
reseals closing off the inlet port,
locking the sample in place.
Stainless Steel Bomb Sampler
The stainless bomb samplers are
manufactured from a high quality
corrosion resistant type 302
stainless steel. The bomb samplers
are designed to collect liquid
samples from storage tanks, lakes,
ponds, manholes, wells and other
hard to reach places.
The plunger assembly will be
activated automatically when the
sampler contacts a hard surface
such as the bottom of a tank or it
may be activated by the operator at
various depths with the use of a pull
line. A Viton® “O” ring insures the
integrity of the sampling chamber
until the plunger is activated.
Ordering Information
CNB5400 Bomb sampler, stainless steel, 29x380 mm, 100 ml
CNB5405 Bomb sampler, stainless steel, 63x280 mm, 500 ml
CNB5406 Bomb sampler, stainless steel, 64x560 mm, 1000 ml
CNB5310 Bomb sampler, Brass 48x230 mm, 125 ml
CNB5330 Bomb sampler, Brass 56x250 mm, 250 ml
CNB5340 Bomb sampler, Brass 56x430 mm, 500 ml
CNB5360 Bomb sampler, Brass 86x410 mm, 1000 ml
8
Subsurface Grab Sampler
Kemmerer Bottle
Kemmerer Bottle
Collect liquid samples without
physically entering potentially
dangerous sites. The Subsurface
Grab Sampler is excellent for access
to fluid flow in manholes and hardto-reach sampling areas. This unit
features a telescoping modular
design for the handle, allowing the
user to break the longer units down
to smaller sections for easy transport.
The cable in the handle features a
ring that can open the sample jar.
The Grab Sampler is made of high
strength aluminium tubing with
polypropylene sampling head and
attaches to a wide mouth, 1,000ml
glass jar.
General Purpose
Stainless Steel/Polyethylene
Stainless/Teflon
Useful for general purpose
sampling at specified depths!
The all-angle head locks the
sampler in the open position
and unlocks when struck by the
messenger, closing both end seals
of the sampler. Constructed of
a stainless steel sampling tube
and polyurethane end seals, the
Kemmerer has few moving parts
and needs little maintenance.
1.2L Volume.
For extra heavy duty use!
Constructed of all stainless steel
with Teflon end seals for sampling
industrial solvents, strong acids and
bases at temperatures up to 232oC.
Also for sampling when stainless
steel and Teflon is required.
1.2L Volume capacity.
WATER SAMPLING
& MONITORING
Open Water Sampler
Ordering Information
Ordering Information
BME223488 Kemmerer Bottle Stainless Steel/Polyethylene, 1.2L, w/Case 6kg
BME223489 Kemmerer Bottle
Stainless Steel/
Polyethylene Kit, 1.2L, Including: 30m of braided line, messenger and carrying case, 6 kg
BME223490 Kemmerer Bottle Stainless Steel/Polyethylene, 1.2L, w/o Case 3 kg
BME223482Kemmerer Bottle Stainless/Teflon w/Case 6 kg
BME223483Kemmerer Bottle
Stainless/Teflon Kit, Including: 30m (100 feet) of steel cable, messenger and case, 7 kg
BME223484Kemmerer Bottle Stainless/
Teflon w/o Case 3 kg
Kemmerer Bottle
Stainless Steel/Polyurethane
Ordering Information
CNB7308
CNB7312
CNB7324
CNB9025
Subsurface Grab Sampler, 1.2m to 2.4m
Subsurface Grab Sampler, 1.5m to 3.6m
Subsurface Grab Sampler, 2.1m to 7.3m
Case of 12 Glass Jars for Subsurface Grab Sampler
With this small diameter
Kemmerer bottle, take discrete
samples at any depth not just the
surface like conventional bailers.
Constructed of durable stainless
steel with polyurethane end seals
and trip head that closes both
ends of the sampler when struck
by the messenger. Sampling
volume of 0.6L. Outer diameter
45mm.
Ordering Information
BME223492 Kemmerer Bottle Kit,
Includes: 66m of polyester line,
messenger and carrying case, 8 kg
9
Open Water Sampler
WATER SAMPLING
& MONITORING
Alpha Horizontal and
Vertical Water Bottle
Beta Plus Horizontal and
Vertical Water Bottle
In clear acrylic or PVC
Alpha water bottles are well suited
for general purpose sampling at any
depth. Plunger like polyurethane
end seals are water resistant and
very flexible for a secure seal. Black
latex tubing is resistant to sunlight
and water for extra durability.
Available in your choice of
horizontal samplers for stratification
sampling or vertical samplers for
placing multiple or single bottles on
each line. 2.21L volume.
Note about contamination
The Alpha Samplers with blue end
seals may leach phosphorus and
mercury and are not recommended
for chemical sampling.
For trace sampling
in clear acrylic or PVC
Beta Plus bottles are similar to
Alpha water bottles except for
the end seals and closing tubing.
The materials used in the Beta Plus
make it more suitable for sampling
trace metals and organics.
Rigid, white polyurethane end
seals with silicone gaskets and
amber latex tubing are used for
cleaner samples without fear
of contamination by leached
materials. No metal parts touch the
sample. Available in your choice of
horizontal samplers for sampling at
any depth or vertical samplers for
stratification studies. 2.21L Volume.
Ordering Information
Ordering Information
Kits include 30m of braided line, stainless
steel messenger and carrying case.
Acrylic Alpha Water Bottles
BME223450 Horizontal, w/Case, 6 kg
BME223451Horizontal Kit, 7 kg
BME223452Horizontal, w/o Case, 5 kg
BME223454Vertical, w/Case, 7 kg
BME223455Vertical Kit, 7 kg
PVC Alpha Water Bottles
BME223458Horizontal, w/Case, 6 kg
BME223459Horizontal Kit, 7 kg
BME223460 Horizontal, w/o Case, 5 kg
BME223462 Vertical, w/Case, 6 kg
BME223463 Vertical Kit, 7 kg
10
Kits include 30m of braided line, stainless
steel messenger and carrying case.
Acrylic Beta Plus Water Bottles
BME223465Horizontal, w/Case, 7 kg
BME223466Horizontal Kit, 7 kg
BME223467Horizontal, w/o Case, 5 kg
BME223469Vertical, w/Case, 7 kg
BME223470Vertical Kit, 8 kg
PVC Beta Plus Water Bottles
BME223472Horizontal, w/Case, 7 kg
BME223473Horizontal Kit, 8 kg
Van Dorn Style Bottle
Lightweight and compact, this
water sampler is ideal for field
workers.
A one litre sampler of transparent
acrylic comes with 20m of calibrated
nylon line and a lead collar which
assures rapid descent and minimal
drift. The trigger release mechanism
seals the sampler chamber at the
desired depth. For removal of water
samples, outlet is mounted on side.
Ordering Information
BME224250 Van Dorn Style Bottle, 5kg
Aquatic Dip Net
D Frame
This Wildco Dip Net is ideal for
sweeping over vegetation or use
in shallow ponds or streams. Net
ring is made of stainless steel and is
securely attached to the hardwood
handle with Wildco’s superior handle
attachment system. Constructed
of a 800 x 900µm mesh nylon bag
reinforced with heavy muslin and an
internal rope at the edge. Diameter
300 mm, Depth 560 mm, handle
1300 L x 30 mm Dia.
Drift Net
For use in streams, rivers, tidal
creeks and estuaries
Drift nets are stationary nets
designed to sample organisms from
flowing waters at and below the
water surface. Nets can be used
individually or in groups with the
nets placed side by side, anchored
to the bottom with stakes.
Frame and stakes are made of
stainless steel. Net is a durable
Nitex nylon with a 363 micrometer
mesh size and measures 1000 mm
long with a mouth of 300 x 450 mm.
Comes with two 450 mm stakes.
Hess Stream
Bottom Sampler
Ideal for gravel and rocky stream
beds
The modified Hess Sampler features
a stainless steel cylinder with
two upstream and downstream
windows of Nitex® nylon and two
strong handles for forcibly pushing
the cylinder into gravel or rocky
stream bottoms.
WATER SAMPLING
& MONITORING
Nets
Water flows through the upstream
and downstream windows and into
the collecting net and bucket. A net
adaptor and straining bucket are
attached to the downstream end of
the net for easy sample removal.
Sample cylinder measures 400H x
325 mm diameter with a bottom
open area of 850 cm2. Downstream
net is constructed of Nitex® nylon
with a choice of mesh sizes.
Ordering Information BME224916 D-Frame Aquatic dip net,4kg
Ordering Information BME223520 Drift net with stakes, 3 kg Plankton Net
The Wildco Fieldmaster Plankton
net is a small but complete
sampling net suitable for use in
shallow waters. Each net features
a threaded adaptor for attaching a
125 ml plastic sample bottle.
Net is constructed of strong Nitex
nylon in a choice of mesh sizes with
swivel and stainless steel bridle.
Net dimensions, 125 mm x 365 mm
long.
Ordering Information
BME223540 Hess Sampler with 1000micronmesh, 9kg
BME223541 Hess Sampler with 600micronmesh, 9 kg
BME223542 Hess Sampler with 500micronmesh, 9 kg
Ordering Information
BME223522Fieldmaster Plankton net, 153 micrometer 2 kg
BME223523Fieldmaster Plankton net, 80 micrometer 2 kg
BME223524Fieldmaster Plankton net, 363 micrometer 2 kg
11
Automatic Sampler
WATER SAMPLING
& MONITORING
Composite/Storm Water
Samplers
WS705 Portable Composite
Sampler
Specifications
WS705 & WS755
Operating Temp 0° to +70°C
WS755 Portable Wastewater/
Stormwater Sampler
Dimensions
560H X 457W X 254D mm
Weight 11.7 kg
MATERIALS
Enclosure
Expanded UV protected PVC
Bottle(s) Polyethylene (WS755: 2x
3.7L, WS705: 1x 9.4L)
Pickup Hose 5m x 6 mm ID,
nylon-reinforced PVC tubing with SS
strainer(s)
Pump Tubing
Norprene 6mm ID,11 mm OD
SAMPLE PUMP
Flow Rate
FEATURES:
• Ideal for wastewater, industrial
and environmental sampling
• Collects composite sample in a
9.4L vessel
• Quick disconnect pickup hose
conveniently stored inside the
enclosure for easy transport
• Simple to operate – no
programming required
• Heavy duty wheels and
retractable handle built in
• Rugged construction for harsh
environments
• Can take timed or flow
proportional samples
• Peristaltic pump prevents sample
contamination
• Automatic backflush clears pickup
strainer and hose
• Enclosed battery compartment
and smart battery charger to
improve battery life
• The easiest and most reliable
method for collecting water
quality samples
12
FEATURES:
• Ideal for wastewater, industrial
and environmental sampling
• Does composite, discrete or both
types of sampling into 2 x 3.75L
poly bottles
• Simple to operate – no
programming required
• Quick disconnect pickup hoses
conveniently stored inside the
enclosure for easy transport
• Heavy duty wheels and
retractable handle built in
• Rugged construction for harsh
environments
• Meets federal, state and local
wastewater regulations
• Timed and external flow
proportional sampling
• Adjustable and repeatable
sample volume
• Peristaltic pump prevents sample
contamination
• Automatic backflush clears
pickup strainer and hose
• Enclosed battery compartment
and smart battery charger to
improve battery life
• The easiest and most reliable
method for collecting water
quality samples
1000 ml per minute at a 1.2 m head
Type Peristaltic
Maximum Lift ~6 m
BATTERY
Life 60 mins WS705
30 min WS755
(continuous pumping under load)
Battery Type
Rechargeable 4.5 Ah
Ordering Information
GLWWS705 Composite sampler
with bottle, battery and charger
GLWWS755 Storm/Waste Water
sampler, with two bottles, battery
and charger
GLWWSSWK Stormwater Kit
Includes: CA0400 Rain Sensor,
CA0500 Flow Sensor and RG333
Auto-drain Rain Gauge
12 Month
Warranty
Aquacell P2 Portable
Automatic Samplers
Portable water samplers
designed for reliability, advanced
programming & flexibility.
Introducing the Aquacell P2
Portable Sampler range. The P2
sampler extracts individual sample
shots (10-500ml adjustable) from
a wastewater channel or vessel
according to a predetermined
program and deposits them into
one or more sample collection
vessels. The P2 Samplers can be
powered by electrical mains power
or rechargeable battery.
Easy to use and maintain –The
Aquacell is designed to minimise
operator burden. Even users with no
Aquacell P2-COMPACT
This sampler is the super-compact
version and includes a 5 litre
polyethylene low profile, easy
clean sample container. It is useful
for regulators and others where
samplers have to be distributed to a
number of sites.
Front access means that sample
retrieval can be done without
disturbing either the sampler or
it’s intake hose. The Aquacell P2
COMPACT is less than half the size of
most comparable samplers.
previous experience of wastewater
sampling will quickly become
fully proficient in operating the
Aquacell.
Aquamatic Air Pump Sample
Extraction System - Every
Aquacell wastewater sampler
embodies the tried and tested
Aquamatic Air Pump Sample
Extraction System. The sampler is
operated / programmed using the
17 button membrane keypad in
conjunction with a 16 x 2 character
liquid crystal display.
Optional Ancillary Signal
Connections
Remote control input - The
sampler can be controlled using a
signal from a pump (which pumps
Aquacell P2-COOLBOX
The portable sampler with the
practical cooling facility. The 5 litre
polypropylene sample container
stores samples for up to 7 days at
between 0 and 5ºC. Samples are
kept cool in a highly insulated cool
box containing pre-frozen cooling
elements, no external power is
required.
the wastewater) or other device,
which produces an event related
signal.
Flow Input - Any flowmeter
with either an integrated or
instantaneous flow output can
be connected to the sampler to
produce flow proportional samples.
WATER SAMPLING
& MONITORING
Automatic Sampler
Sample Acquired Output - A
contact closes each time a sample
enters the sampler.
Optional computer interface
- Aquacell’s built in event logger &
temperature logger (if sample temp
monitoring is specified on the P2COOLBOX ) can be downloaded to
your laptop if you specify the RS232
interface with the sampler.
Aquacell P2-MULTIFORM
This is the most versatile sampler, as
it can accept a variety of containers:
1x 25L; 12 x 0.7L; 12 x 1L; or 24 x 1L.
Changing from one option to the
other is a very simple operation.
Specifications
Specifications
P2-COMPACT (Max Lift 7m)
Container Options 5 Litre only (integrated)
Typical Location Indoor/Outdoor
Sample Temp Control No
Min. Ambient Temp-10C
Max Ambient Temp50C
Dimensions
428 x 320 x 376mm
Weight
6kg
Specifications
P2-COOLBOX (Max Lift 7m)
Container Options 5 Litre Coolbox
Typical Location
Indoor/Outdoor
Sample Temp Control Yes (passive)
Min. Ambient Temp -10C
Max Ambient Temp 50C
Dimensions
805 x 430 x 430mm
Weight
17.7kg
P2-MULTIFORM (Max Lift 7m)
Container Options
25L Poly Container
12 x 750ml glass bottler
12 x 1L PET Bottler
24 x 1L HDPE Bottler
Typical Location Indoor/Outdoor
Sample Temp Control No
Min. Ambient Temp-10C
Max Ambient Temp50C
Dimensions
650 x 447 x 447mm
Weight
17.7kg
13
Automatic Sampler
Temperature Control Both S320 models incorporate
sample temperature control. This
ensures that the collected samples
are preserved at an optimum
Collection Vessels The large volume lower
compartment can accommodate
a vast array of sample collection
vessels, both composite and multi
bottle. Access to these could
not be easier with the optional pull
out tray (included with Integral
bottlers).
Sample Collection Vessels for
Aquacell Portable and Stationary
(Please see Container Options in
specifications for compatibility to
sampler)
Cabinet Options Standard–GalvanisedSteel,pretreated and finished with white
polyester powder coating
Optional – Stainless Steel 304
2.
3.
Optional – Stainless Steel 304,
finished with white Polyester
powder coating
All finishes are extremely durable
and suitable for indoor and outdoor
applications.
1.
4 x 4.5L Glass
Integral Bottler
4 x 5L HDPE
Integral Bottler
14
12 x 1L Glass Bottler
4 x 12 HDPE
2 x 4.5L Self-Emptying
Integral Bottler
Integral Bottler
24 x 1L HDPE Bottler
S310H or S320H Stationary Sampler
Container Options
10L Poly Container
25L Poly Container
2 x 4.5L Self-Emptying Poly Integral Bottler
4 x 4.5L Glass Integral Bottler
4 x 5L HDPE Bottler
4 x 5L HDPE Integral Bottler
4 x 12L Poly Integral Bottler
12 x 0.75L Glass Bottler
12 x 1L PET Bottler
12 x 1L HDPE Bottler
24 x 1L HDPE Bottler
Typical Location
Outdoor
Power
Mains (with backup battery)
Sample Temp Control S310H - No
S320H - Yes
4 x 5L Glass Integral Bottler
Specifications
12 x 1L PET Bottler
25L Container
Aquacell S310H & S320H
Stationary Sampler
These floor standing samplers
for outdoor incorporates frost
protection for sample (S310H &
S320H). The S320H has a refigerated
cabinet for sample temperature
control.
External Equipment Via the ancillary signal connection
all S300 models can be connected
to and controlled by external
equipment such as flow meters, pH
meters, PLCs etc.
Security All electrical connections both
power and signals are wired into
the rear of the S300 cabinet. A screw
down protective panel provides
security against unauthorised access.
Terminals are positioned at a height
of 1000mm from the floor.
Separate lockable compartments
provide flexibility and security in
exposed or vulnerable locations.
4 x 5L HDPE
Integral Bottler
The S310H and S320H Stationary
Automatic Samplers are powered by
mains power, with a backup battery.
(Ask us about indoor samplers, also
available). Collected samples are
stored in the Lower Compartment.
Being separate from the Sampling
Module this configuration means
the user can interrogate the
program and carry out routine
maintenance without the need to
disturb the samples.
temperature (0°C - 5°C) whilst
awaiting collection / inspection.
This is particularly useful when
sampling biologically active
wastewater.
5L Container
WATER SAMPLING
& MONITORING
Aquacell S300 Series
Stationary Automatic
Samplers
12 x 1L HDPE
Integral Bottler
12 x 1L Glass
Integral Bottler
Sludge Judge®
Tank Sampler
Mucksucker™
Take accurate readings of settled
solids to 5m
For depths
from 0.3 to 3m
For sampling viscous
liquids and sludge
Ideal for sampling solids in
noncaustic materials. Lower the
20mm sampler to the bottom of
the tank, drum or pond. A float
opens allowing material to flow in.
When the sampler is filled, tug on
the attached rope as the sampler is
raised. This sets the valve, trapping
the column of solids and liquid. Use
the 0.3m graduations along the
clear plastic tube to determine the
amount of solids. Touch the pin
extending from the bottom on a
hard surface to release the valve and
drain the sampler. Sampler comes in
three 1.5m sections with screw type
fittings. 1.5m extensions available
for greater depths. A convenient
carry case and 1.8m cleaning brush
are also available. Lower the sampler
to the desired depth
using the 1’ (0.3 m)
graduations as a
guide. When in place,
pull and hold the top
rope, which opens the
check valve, until the
sampler is filled with
liquid. Releasing the
rope allows the check
valve to close, trapping
the sample inside.
To empty, hold the
sampler at a 15 degree
angle and pull the
rope, or simply press
the release pin at the
bottom of the sampler
against a hard surface
such as the bottom of
a pail. The sampler is
made of a tough 20mm
diam plastic, holds
approx 75 ml per 0.3m
and is available as a 3m
unit, made of two 1.5m
sections.
Features a syringe action
for sampling fluids and
sludges that have a high
viscosity. To use, loosen the
safety nut, push the
T-handle down, close
the push/seal bottom
and insert the sampler
into drum or tank. When
desired sampling depth
is reached, open the
push/seal bottom, pull the
T-handle up until sample
is obtained, and close the
push/seal bottom snaps
by pressing against the
bottom or side of the drum
or tank.
WATER SAMPLING
& MONITORING
Drum & Tank Samplers
Ordering Information
BME224650 Mucksucker, 1m Teflon® 200 ml Capacity
BME224652 Mucksucker, 2m Teflon® 475ml Capacity
Ordering Information
BME28977 Tank sampler,
20mm diam x 3m
BME18583 Carrying case
BME2264951.8m spiral cleaning brush
Ordering Information
BME18582 Sludge Judge Sampler,
20mm diameter x 5m
BME18583 Carrying case
BME2264951.8m Spiral Cleaning brush
15
Peristaltic Pump
WATER SAMPLING
& MONITORING
Athena®
Alexis®
Geopump Series II
Peristaltic Pump, 12V
Peristaltic Pump, 12V
Peristaltic Pump, 12V
The Athena® Peristaltic Pump
is lightweight and compact. To
use, simply attach an external
power source such as a 12 volt
battery to drive the pump. A high
performance motor consumes only
3 amps at maximum draw making
it an extremely efficient pump.
The rugged Pelican™ 1300 case
enclosure is made to withstand
demanding work conditions.
Incorporating the most accurate
and precise variable speed
controller for consistent flow rates
will ensure the technician reliable
sample integrity. Includes a builtin digital display and sealed push
buttons are used to control the
pump.
The compact Alexis® Peristaltic
Pump can either run on its selfcontained internal 17 amp AGM
battery or 220 volt electric socket.
This pump is light-weight and
extremely durable. The rugged
Pelican™ 1430 case enclosure is
made to withstand demanding
work conditions. Incorporating the
most accurate and precise variable
speed controller for consistent flow
rates will ensure the technician
reliable sample integrity. Includes a
built-in digital display. Sealed push
buttons are used to control the
pump.
The Geopump Peristaltic Pump is
designed for pumping of liquids
from groundwater wells or open
water channels. It uses the proven
Masteflex Easy Load II pump head.
Features
• Constant Voltage Boosting Technology
• Masterflex Easyload™ 2 pump head design
• Precise Push Button Technology
• Super strong - Pelican™ 1300 case
• LCD Display
• Push Button Back Flushing
• Low Voltage Disconnect Warning
• Auto Reset Internal Fuse
• 4.5m of DC battery clamps to hook up for super long sampling events
Features
• Constant Voltage Boosting Technology
• Masterflex Easyload™ 2 pump head design
• Long Lasting Internal Battery with Precise Push Button Technology
• Super strong - Pelican™ 1430 case
• LCD Display
• Push Button Back Flushing
• Low Voltage Disconnect Warning
• Auto Reset Internal Fuse
• 4.5m of DC battery clamps to hook up for super long sampling events
Features
• Variable speed
• Forward, Stop and Reverse switch positions
• Ideal for pumping water through filters right at the sampling site
Power
The pump kit operates from a 12
volt DC internal battery giving
4 hours of pumping or from an
external power source such as your
vehicle battery. It draws 3-5 amps
maximum. The variable speed
motor is equipped with a 5 amp
fuse and a blocking type reverse
polarity protection.
Specifications
Max. Lift 8m
Max. Flow 1L per min
Min. Flow 60ml per min
Ordering Information
Specifications
Max. Lift 8m
Max. Flow 2.5L per min
Min. Flow 40ml per min
Ordering Information
PEPATHENA Peristaltic Pump mounted in case
NEW
Masterflex Easyload™ 2 pump head is a registered
trademark of Thermo Fisher Scientific
16
Specifications
Max. Lift 8m
Max. Flow 2.5L per min
Min. Flow 40ml per min
Ordering Information
PEPALEXIS Peristaltic Pump mounted in case with internal battery
NEW
GAB91350103 GPSII Series II, 12 v
DC pump, reversible, variable speed,
600 rpm max, with battery leads, with
Materflex series II pump head for L/S15,
24 tubing. Supplied with 1 m tubing.
GAB91350113
As above with hard field case
GAB77250013 Charger for Modular
Battery Pack 240V
GAB77250001 Modular Battery Pack
Secchi Disk Turbidity Mesurements
Designed for relative
turbidity studies
Fieldmaster Secchi Disk
A weighted, standard size 20cm
diam limnology secchi disk with
black and white quanrants used
for water quality studies. Comes
with 20m of uncalibrated line on a
convenient spool and instructions.
Combined Sampling Kit
For water pollution and
limnological studies
The sampling kit includes one each
of the following; black & white
secchi disk, 20m weighted line, 153
µm plankton net, thermometer,
dissolved oxygen sampling bottle,
stainless steel sampling dredge and
Borger Color System book. All is
contained in a sturdy plastic carrying
case with foam interior.
Oceanographic Secchi Disk
A visibility disk that is white on one
side and black on the reverse side,
with a diameter of 20cm or 50cm.
The disk is lowered on a sounding
line into salt water, until the white
can no longer be seen. The disk
can be reversed and the depth
measurement repeated on the
black side. White side can be used
to evaluate water colour. Made of
acrylic plastic with stainless steel
hardware. Weighted underneath for
stability.
Turbidity Tube
Viewing Bucket
Estimate stream quality as it
relates to suspended materials
in water.
Lets you view a stream bed from
water surface
Get a clear glimpse of the water
subsurface with this view bucket.
The transparent base lets you see
the river bed or other body of water
clearly. Durable plastic pail is 240
mm diameter and 270mm deep.
Just as a secchi disk is used as
a measure of lake quality, the
turbidity tube is an excellent
reference for the study of water
quality. The 45mm (1-3/4in.)
diameter clear PVC tube is marked
with Turbidity readings and has
a line pattern at the bottom of
the tube. To use, the tube is filled
with water until the line pattern
disappears.
WATER SAMPLING
& MONITORING
Open Water Monitoring Accessories
Ordering Information
BME125043 View bucket with clear bottom, 2 kg
The height
of the water
column
is then
recorded
and a
turbidity
reading in
NTU can be
estimated.
Ordering Information
SBLENV8.20Transparency Tube, 1 kg, 1.2 m high
Fish-Ray
Hand Held Sonar
Bottom Depth Indicator
The revolutionary Fish-Ray is a self contained depth sounder capable of reading
depths up to 30m
Used like a radar gun, hold the nose under water and pull the trigger. Water depth
will instantly appear on the large LCD display at the rear of the unit. The location
of the display allows the user to scan the bottom for contour changes. Excellent
for lake studies, sediment sampling or locating underwater objects.
Minimum depth is 600mm. Accuracy: +150mm
Ordering information
BME224925 Fish-Ray, 30m
Ordering Information
BME223512 Fieldmaster Secchi Disk, 20cm diameter, with 20m rope, 1 kg
BME92010 Limnological Kit, 8 kg
BME223510 Oceanographic Secchi Disk, 20 cm, 1.5 kg
BME223511 Oceanographic Secchi Disk, 50 cm, 5 kg
17
Open Water Accessories / Water Flow Probe
WATER SAMPLING
& MONITORING
Staff Gauge
Level Measurements
Used on bridges, piers, docks, and
waste water tanks, these simple
gauges allow easy to read level
measurements.
These gauges are made from
white enamel over steel. The black
markings show cm graduations
which are easy to read. Supplied
in 1m long sections marked from 0
to .9, the gauges can be stacked on
top of each other to provide longer
measuring intervals. Number Plates
can be used to mark out each metre.
9
1 2 3
8
7
6
5
Water Tracing Dyes
Global Flow Probe
Ecologically safe dyes for use
in stream tracing, lake studies,
flow mapping, storm and sewer
analysis, pollution studies and
leak detection. Two formulations:
FWT Red, a specially formulated
version of the dye Rhodamine WT
and FLT Yellow/Green, which is
a formulated version of the dye
Fluorescein. Fluorescent colors
can be detected visually in most
water conditions or with the use of
ultra-violet light or a fluorometer.
Global Flow Probe
Digital Water Velocity Meter
The Global Water Flow Probe is
a highly accurate water velocity
instrument for measuring flows in
open channels and partially filled
pipes. The water velocity probe
consists of a protected water
turbo prop positive displacement
sensor coupled with an expandable
probe handle ending in a digital
readout display. The water flow
meter incorporates true velocity
averaging for the most accurate
flow measurements. The Flow
Probe is ideal for storm water runoff
studies, sewer flow measurements,
measuring flows in rivers and
streams, and monitoring water
velocity in ditches and canals.
Fluorescent dyes are temporary and
will degrade naturally in sunlight,
2-5 days for Red and 5-7 days for
Yellow/Green, or with the addition
of chlorine. FLT Yellow/Green is
resistant to absorption in organic
matter and should be used in water
with heavy sediment loads.
Using a UV lamp for detection,
allows detection down to approx
1/10th of what can be seen with
visual detection and therefore
reduces the amount of dye
required.
4
3
• Digital display in ft/sec or m/sec
• Records 30 data sets for later
analysis
• Rain-proof digital computer
• Highly accurate easy flow
monitoring
• Debris shedding turbo-prop
• Lightweight, rugged, and reliable
• Telescoping handle with staff
gauge
• Padded carrying case for easy
storage
2
1
Ordering information
GMIMSN Staff Gauge Section, 1m long x 70mm wide, with mounting holes
GMIMSW Staff Gauge Section 1m long x 130mm wide, with mounting holes
GMINP Number Plates with mounting holes, Specify number: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9
18
Ordering information
BME23680 FWT RED 200 Tablets, 1 tablet per 1,650 litres for visual detection
BME23682 FWT RED 0.47 liter, 1 liter per 510,000 litres for visual detection
BME23679 FLT Yellow/Green 200 Tablets, 1 tablet per 1,650 litres for visual detection
BME23681 FLT Yellow/Green 0.47 liter, 1 liter per 780,000 litres for visual detection
BME103031Handheld UV lamp, 4 Watt, uses 4 AA batteries, inc Instruction manual
Specifications
Carrying Case Dimensions
230 x 100 x 100mm
Range 0.1 to 6.1 m/s
Ordering Information
GLWFP111 Flow Probe 0.9 to 1.8m reach and carry case
GLWFP211 Flow Probe 1.5 to 4.5m reach and carry case