Samsung DVDV9700 Instruction manual

Instruction Manual
DVD-V9700
DVD-V9700
www.samsung.com
Downloaded From Disc-Player.com Samsung Manuals
SAFETY INSTRUCTIONS
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with a dry cloth.
7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as radiators, heaters, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong.
The wide blade and the third prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,
and the point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with a cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus.
13) When a cart is used, unplug this apparatus and use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
14) Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as the power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus. Service is also required if the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
Downloaded From Disc-Player.com Samsung Manuals
ENG-2
SAFETY INSTRUCTIONS
Precautions
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
This symbol indicates important
instructions accompanying the
product.
Do not install this equipment in a confined space such as a bookcase or similar unit.
WARNING : To prevent damage which may result in fire or electric shock hazard, do not expose
this appliance to rain or moisture.
Note to CATV system installer: This reminder is provided to call CATV system installer’s attention to Article
820-40 of the National Electrical Code (Section 54 of Canadian Electrical Code, Part I) that provides guidelines
for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building as close to the point of cable entry as practical.
Caution: FCC regulations state that any unauthorized changes or modifications to this equipment may void the
user’s authority to operate it.
• Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall
be placed on the apparatus.
• If this power supply is used at 240V ac, a suitable plug adapter should be used.
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on.
The user is encouraged to try to correct the interference by one or more of the following measures.
• Reposition or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect this equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This class B digital apparatus meets all requirements of the Canadian Interference -Causing Equipment Regulations.
CLASS 1
LASER PRODUCT
KLASSE 1
LASER PRODUKT
LUOKAN 1
LASER LAITE
KLASS 1
LASER APPARAT
PRODUCTO LÁSER CLASE 1
Downloaded From Disc-Player.com Samsung Manuals
ENG-3
SAFETY INSTRUCTIONS
CAUTION
THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN
HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVER AND DO NOT REPAIR YOURSELF.
REFER SERVICING TO QUALIFIED PERSONNEL.
Note:
• This unit can be used only where the power supply is AC 120V, 60Hz. It cannot be used elsewhere.
• This DVD player is designed and manufactured to respond to the Region Management Information.
If the Region number of a DVD disc does not correspond to the Region number of this DVD player,
the DVD player cannot play the disc.
Handling Cautions
• Before connecting other components to this player, be sure to turn them all off.
• Do not move the player while a disc is being played, or the disc may be scratched or broken, and the player’s
internal parts may be damaged.
• Do not put a flower vase filled with water or any small metal objects on the player.
• Be careful not to put your hand into the disc tray.
• Do not place anything other than the disc in the disc tray.
• Exterior interference such as lightning and static electricity can affect normal operation of this player.
If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the
AC power cord to the AC power outlet. The player will operate normally.
• Be sure to remove the disc and turn off the player after use.
• Disconnect the AC power cord from the AC outlet when you don’t intend to use the player for long
periods of time.
• Clean the disc by wiping in a straight line from the inside to the outside of the disc.
Disc Storage
Be careful not to harm the disc because the data on these discs is highly vulnerable to the environment.
• Do not keep under direct sunlight.
• Keep in a cool ventilated area.
• Store vertically.
• Keep in a clean protection jacket.
Maintenance of Cabinet
For safety reasons, be sure to disconnect the AC power cord from the AC outlet.
• Do not use benzene, thinner, or other solvents for cleaning.
• Wipe the cabinet with a soft cloth.
Downloaded From Disc-Player.com Samsung Manuals
ENG-4
BEFORE
Y O U S TA R T
Before you start
Accessories
Remote Control
AK59-00061J
Batteries-2EA
1.5V(AAA)
AC43-12002H
Video/Audio Cable
AC39-00073A
Install Batteries in the Remote Control
1
Open the battery cover on
the back of the remote
control.
2
Insert two AAA batteries.
Make sure that the
polarities (+ and -) are
aligned correctly.
3
Replace the battery
cover.
If the remote control doesn’t operate properly:
■
■
■
■
Check the polarity +, - of the batteries.
Check if the batteries are drained.
Check if the remote control sensor is blocked by obstacles.
Check if there is any fluorescent lighting nearby.
Downloaded From Disc-Player.com Samsung Manuals
ENG-5
User’s Guide
AK68-01304D
TA B L E
OF
CONTENTS
Table of Contents
Safety Instructions ........................................................................................................................................2
Important Safety Instructions ................................................................................................................2
Precautions ..........................................................................................................................................3
Before you start ............................................................................................................................................5
Accessories............................................................................................................................................5
Install Batteries in the Remote Control ..................................................................................................5
Chapter 1: Setup
General Features............................................................................................................................................8
Disc Type and Characteristics ........................................................................................................................9
Description....................................................................................................................................................10
Tour of the Remote Control..................................................................................................................12
Chapter 2: Connections
Before Connecting the DVD-VCR ..............................................................................................................13
Connecting a STB to the DVD-VCR ............................................................................................................13
Connection to a TV ......................................................................................................................................14
Connecting to a TV with an HDMI Jack ..............................................................................................14
Connecting to a TV (Progressive)........................................................................................................16
Connecting to a TV (Interlace) ............................................................................................................17
Connecting to a TV (Video)..................................................................................................................18
Connection to an Audio System ..................................................................................................................19
Connecting to an Audio System (2 Channel Amplifier, Analog) ..........................................................19
Connecting to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)..........................................20
Connecting the Power Cord ........................................................................................................................21
Chapter 3: Initial Setup
Selecting a Menu Language ........................................................................................................................22
Setting the Clock ........................................................................................................................................23
Setting the Clock Manually ................................................................................................................23
Setting the Front Panel Display ..................................................................................................................24
Setting the Auto Power Off ..........................................................................................................................25
Chapter 4: DVD Operations
Playing a Disc ..............................................................................................................................................26
Using the Search and Skip Functions ........................................................................................................28
Using the Display Function ..........................................................................................................................29
Using the Disc and Title Menu (DVD) ..........................................................................................................31
Using the Function Menu (DVD) ..................................................................................................................32
Repeat Play ................................................................................................................................................33
Slow Play ....................................................................................................................................................34
Adjusting the Aspect Ratio (EZ View) ..........................................................................................................35
Selecting the Audio Language ....................................................................................................................37
Downloaded From Disc-Player.com Samsung Manuals
ENG-6
TA B L E
OF
CONTENTS
Selecting the Subtitle Language ................................................................................................................38
Changing the Camera Angle ......................................................................................................................39
Using the Bookmark Function (DVD) ..........................................................................................................39
Using the Zoom Function (DVD) ..................................................................................................................41
Clips Menu for CD Audio/MP3/WMA/JPEG/MPEG4 files ............................................................................42
Folder Selection ..........................................................................................................................................42
CD Audio/MP3/WMA Playback ....................................................................................................................43
MPEG4 Playback ........................................................................................................................................45
Picture CD Playback ....................................................................................................................................47
Using the Setup Menu ................................................................................................................................49
Setting Up the Language Features ..............................................................................................................50
Setting Up the Audio Options ......................................................................................................................52
Setting Up the Display Options ....................................................................................................................54
Setting Up the Parental Control ..................................................................................................................58
DivX(R) Registration ....................................................................................................................................61
Chapter 5: VCR Operations
Inserting and Ejecting a Video Cassette Tape ............................................................................................62
Playing a Pre-Recorded Video Cassette Tape ............................................................................................63
Special VCR Playback Features ................................................................................................................64
Using Automatic Tracking ............................................................................................................................65
Selecting the Cassette Type ........................................................................................................................66
Setting the Auto Play ..................................................................................................................................67
Setting the Auto Repeat ..............................................................................................................................68
Using the Tape Counter ..............................................................................................................................69
Using the Assemble Edit Function ..............................................................................................................70
Selecting the Audio Output Mode ................................................................................................................71
Searching for a Specific Sequence ............................................................................................................72
Basic Recording ..........................................................................................................................................74
Special Recording Features ........................................................................................................................75
Using One-Touch Recording ......................................................................................................................76
Selecting the Recording Speed ..................................................................................................................77
Making a Timer Recording ..........................................................................................................................78
Chapter 6: Reference
Using the TV Buttons on the Remote Control ............................................................................................80
Troubleshooting ..........................................................................................................................................81
Technical Specifications ..............................................................................................................................83
Downloaded From Disc-Player.com Samsung Manuals
ENG-7
Chapter 1
SETUP
General Features
DVD-VCR Features
■
■
■
Perfect compatibility to play back DVDs, audio
CDs or VHS Tapes.
Composite, Component Video and HDMI
outputs.
On-Screen Program (English/French/Spanish).
Note
This product incorporates copyright protection
technology that is protected by U.S. patents and other
intellectual property rights. Use of this copyright
protection technology must be authorized by
Macrovision, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision. Reverse engineering or disassembly
is prohibited.
DVD Features
■
■
■
■
■
10-bit video digital to analog converter and
54MHz advanced digital filter.
Playback of 96KHz/24-bit sources.
DTS digital output for DTS-enhanced DVDs.
This unit can play MPEG4 formats within an avi
file.
Playback MP3-CDs.
VCR Features
■
■
■
■
■
Hi-Fi Stereo VCR.
Superior slow motion and stop action (with 4
heads).
Playback of S-VHS tapes with a better than
standard resolution.
INTRO Scan, Zero Return, and END Search.
Time remaining counter, real time counter.
Note
■
Discs which cannot be played with this player.
- DVD-ROM/DVD-RAM/VCD
- CDI/CDV
- Super Audio CD (CD, HD layer)
- CDGs play audio only, not graphics.
- DVD-RW (VR mode)
- Non finalized DVD-RW, -R, DVD+RW, and +R
discs.
■
Ability to play back may depend on recording
conditions.
- DVD-RW, -R/CD-RW/DVD+RW, +R/CD-ROM
This DVD-VCR unit does not have a TV tuner.
Recording TV broadcasts is possible via
Connection to Cable/Satellite boxes and Multi
Channel Video Services.
■
Downloaded From Disc-Player.com Samsung Manuals
COPY PROTECTION
Many DVD discs are encoded with copy protection.
Because of this, you should only connect your DVDVCR directly to your TV, not to a VCR. Connecting to
a VCR results in a distorted picture from copyprotected DVD discs.
This product incorporates copyright protection
technology that is protected by methods claims of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized
by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
PROGRESSIVE SCAN
OUTPUT SETTING
PLEASE NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IF PROGRESSIVE SCAN PICTURE
PROBLEMS OCCUR, WE RECOMMEND
SWITCHING THE CONNECTION TO THE
‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE
QUESTIONS REGARDING YOUR TV SET
COMPATIBILITY WITH THIS DVD-VCR, PLEASE
CONTACT SAMSUNG'S CUSTOMER SERVICE
CENTER.
ENG-8
SETUP
Disc Type and Characteristics
This DVD-VCR is capable of playing the following types of discs with the corresponding logos:
Disc Types (Logos) Recording Types Disc Size Max. Playing Time
DVD
Audio
+
Video
AUDIO-CD
5”
3 1/2”
Single-sided 240 min. - DVD contains excellent sound
and video due to Dolby Digital
Double-sided 480 min.
and MPEG-2 system.
Single-sided 80 min. - Various screen and audio
functions can be easily selected
Double-sided 160 min.
through the on-screen menu.
5”
74 min.
3 1/2”
20 min.
Audio
■
■
Characteristics
- CD is recorded as a Digital
Signal with better audio quality,
less distortion and less
deterioration of audio quality
over time.
CD-R,CD-RW and DVD-RW, -R, DVD+RW, +R discs may not be playable in all cases due to the disc
type or condition of the recording.
Do not run the player with two discs loaded at the same time.
Disc Markings
~
NTSC
Region Number
Play Region Number
NTSC broadcast system in U.S.A, Canada, Korea,
Japan, etc.
Dolby Digital disc
STEREO
Stereo disc
DIGITAL
SOUND
Digital Audio disc
Both the DVD-VCR and the discs are
coded by region. These regional codes
must match in order for the disc to play.
If the codes do not match, the disc will
not play.
The Region Number for this player is
described on the rear panel of the player.
DTS disc
MP3 disc
DivX Certification
You must only insert one DVD disc at a time. Inserting two
or more discs will not allow playback and may cause
damage to the DVD-VCR.
Downloaded From Disc-Player.com Samsung Manuals
ENG-9
DivX, DivX Certified, and
associated logos are
trademarks of DivXNetworks, Inc and are
used under license.
SETUP
Description
Front Panel Controls
1
2
4
3
DVD-V9700
5
1
2
3
4
5
6
7
8
6
8
7
DISC TRAY
Place the disc here.
OPEN/CLOSE
Press to open and close the disc tray.
VCR Deck
Insert a standard VHS video tape.
EJECT
Press to eject a video tape if the tape is stopped.
(POWER)
Press to turn the DVD-VCR on and off.
LINE IN 2
Connects to the Video/Audio output jack of your
external device.
P.SCAN
Selects the progressive scan mode.
Front Panel Display
Operation indicators are displayed here.
9
10
11
12
13
14
15
16
9
9
10
11
12
13
14
15
16
LINE IN SELECT
Press to select Line Input 1 or 2. These buttons
are also used as Tracking buttons for the VCR.
DVD/VCR
Press to select DVD or VCR mode.
HDMI
HDMI Output resolution setup.
REC (VCR)
Press to begin recording.
(Reverse/Rewind)
Press to reverse/rewind a disc/video tape.
(STOP)
Press to stop a disc/video tape during playback or
record (VCR).
(Play/Pause)
Press to play or pause the disc/video tape.
(Forward/Fast Forward)
Press to forward/fast forward a disc/videotape.
Front Panel Display
❶
❷
❹
Downloaded From Disc-Player.com Samsung Manuals
❸
➎
1
DVD is activated.
2
The time, counter position, time remaining or
current deck status is indicated.
3
VCR is activated.
4
DVD or CD media is loaded.
5
VHS videotape is loaded.
ENG-10
SETUP
Rear Panel
Œ ´
¨
1
AUDIO OUT
Connect to the Audio input jacks of your television.
2
COMPONENT VIDEO OUT
- Use these jacks if you have a TV with
Component Video in jacks.
These jacks provide PR, PB and Y video.
- If Progressive Scan (P-SCAN) is selected by
pressing the P.SCAN button on the front panel,
progressive scan video mode will be enabled.
- If Interlace Scan (I-SCAN) is selected by
pressing the P.SCAN button on the front panel,
interlace scan video mode will be enabled.
ˆ
ˇ
Ø ¨
4
DIGITAL AUDIO OUT (OPTICAL/COAXIAL)
- Use either an optical or coaxial digital audio
cable to connect to a compatible Dolby Digital
receiver.
- Use either an optical or coaxial digital audio
cable to connect to an A/V Amplifier that
contains a Dolby Digital, MPEG2 or DTS
decoder.
5
LINE IN 1 (VIDEO/AUDIO)
Connect to the Video/Audio output jack of your
external device.
6
LINE OUT (VIDEO/AUDIO)
Use a Video/Audio cable to connect to the
Video/Audio input jacks on your television.
You must have these jacks connected to see
video playback from the VCR on your TV.
3. HDMI OUT JACK
- Use an HDMI cable to connect this jack to the
HDMI jack on your television for the best
quality picture.
- If an HDMI cable is connected to an HDMIcompatible TV, HDMI will be output
automatically within 10 seconds.
- If you want to use the Video or Component
Output, unplug the HDMI cable.
DVD/VCR Output Chart
DVD Output Jacks VCR Output Jacks
COMPONENT VIDEO OUT
O
X
AUDIO OUT (L,R)
O
X
DIGITAL AUDIO OUT (OPTICAL, COAXIAL)
O
X
LINE OUT (A/V)
O
O
HDMI OUT
O
X
▼
Type of Connection
O : Active.
X : Inactive.
Notes
■ Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is
supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.
Downloaded From Disc-Player.com Samsung Manuals
ENG-11
SETUP
Tour of the Remote Control
1 TV button
Use to operate the TV.
2 DVD button
Use to operate the DVD player.
3 POWER button
Press to turn the DVD-VCR on
and off.
4 NUMBER Buttons
5 TV 100+ button
6
Skip button
Press to skip a disc
backwards. Use to skip a
title,chapter or track on a disc.
7 REC button
Press to begin recording.
(VCR)
8
Search button
Press to search a disc
backwards.
9
(STOP) button
Press to stop a disc/video tape
during play or record (VCR).
10 TV VOL (+,-) button
11 MENU button
Brings up the DVD-VCR
player’s menu.
œƒ¦‹ buttons
12 ENTER/œ
This button functions as a
toggle switch.
13 DISC MENU button
Brings up the Disc menu.
(DVD).
14 EZVIEW button
The aspect ratio of a picture
can easily be adjusted
according to the screen size of
your TV (16:9 or 4:3).
15 SUBTITLE button
Press to display the subtitle
language name abbreviation on
screen.
16 MODE button
Use to select the program or
random play.
REPEAT button
Allows you to repeat play a title,
chapter, track, or disc. (DVD)
17 INPUT SEL. button
Press to select Line input 1 or 2
in VCR mode.
18 VCR button
Use to operate the VCR.
Œ
´
˜
¯
ˇ
˘
¿
¨
ˆ
¸
Ø
∏
”
’
˛
◊
±
≠
˝
–
Ô
—
÷

Ò
Ú
Æ
®
∑
μ
ı
¥
Downloaded From Disc-Player.com Samsung Manuals
ENG-12
19 F.ADV/SKIP button
Press to advance play one
frame at a time (DVD and
VCR). Press to fast forward a
video tape (VCR). Press to
select a external signal
source.
20 OPEN/CLOSE button
Use to open and close the
disc tray or eject a video
tape.
21 ZOOM button
To enlarge the picture.
22
Skip button
Press to skip a disc forward.
Use to skip a title, chapter or
track on a disc.
23 SPEED button
Use to select the tape
recording speed.
24
Search button
Press to search a disc
forward.
25
(Play/Pause) button
Press to play or pause the
disc/video tape.
26 TRK/TV CH button
Use to change channels.
(TV) Use to adjust tape
tracking. (VCR)
27 AUDIO/TV MUTE button
Use this button to access
various audio functions on a
disc. (DVD mode)
This operates as Sound
Mute. (TV mode)
28 RETURN button
Returns to a previous menu.
29 CLEAR button
Use to remove menus or
status displays from the
screen.
30 INFO. button
Displays the current disc
mode. (DVD)
31 MARK/SEARCH button
Press to memorize scenes
for replay. (DVD)
Displays the VCR Function
menu. (VCR)
32 ANGLE/TIMER button
Use to access various
camera angles on a disc.
(DVD) Displays the Timer
Program menu (VCR).
Chapter 2
CONNECTIONS
Before Connecting the DVD-VCR
- Always turn off the DVD-VCR, TV, and other components before you connect or disconnect any cables.
- Refer to the user’s manual of the additional components (such as a TV) you are connecting for more
information on those particular components.
Connecting a Set-top/Cable/Satellite Box to the DVD-VCR
The following instructions show how to connect a Set-Top Box,TV and Amplifier to the DVD-VCR.
1
Use a TV antenna cable to connect the signal
source coming from the antenna or wall to the
ANT IN jack on the STB.
2
Use the Video/Audio Cable to connect the LINE
OUT jacks on the STB to the AUDIO/VIDEO
LINE IN 1 jacks on the DVD-VCR..
3
Video Cable
Audio Cable
Video Cable
Audio Cable
DVD-V9700
Select LINE 1 by pressing LINE IN SELECT
button on the front panel or INPUT SEL.
button on remote control in VCR mode .
4
Use the Video/Audio Cable to connect the LINE
AUDIO OUT(R/L)/VIDEO OUT jacks on the DVDVCR to the Audio & Video jacks on the TV.
Tunerless DVD Player & VCR
This DVD-VCR unit does not have a TV tuner. Recording TV broadcasts is possible via Connection to
Cable/Satellite boxes and Multi Channel Video Services.
Notes
- If you want to use other connections to a TV, please refer to the TV connection pages. (See pages 14 to
18)
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 19 to 20)
- When you connect a STB through the LINE IN 1 jack of the DVD-VCR, you still can see the picture from
the STB on your TV set if the DVD-VCR is turned off.
Downloaded From Disc-Player.com Samsung Manuals
ENG-13
CONNECTIONS
Connection to a TV
The following shows examples of connections commonly used to connect the DVD-VCR with a TV and other
components.
Connecting to a TV with an HDMI Jack
1
Using an HDMI-HDMI cable, connect the HDMI
OUT jack on the rear of the DVD player to the
HDMI IN jack of your TV.
2
HDMI Cable
Not included
Press the input selector on your TV remote
control until the HDMI signal from the DVD player
appears on your TV screen.
HDMI VIDEO Specifications
When you press the HDMI button on the front panel, 480p, 720p, and 1080i are selected in order.
The first press of the HDMI button on the front panel brings up the current resolution.
The second press allows you to change the HDMI output resolution.
- Depending on your TV, certain HDMI output resolutions may not work.
- Please refer to the user’s manual of your TV.
- When using an HDMI connection, the DVD player’s output is set to HDMI within 10 seconds.
- For better picture quality, set the HDMI output resolution to 720p or 1080i (see page 56).
Downloaded From Disc-Player.com Samsung Manuals
ENG-14
CONNECTIONS
● HDMI (High Definition Multimedia Interface)
HDMI is an interface that enables the digital transmission of video and audio data with just a single cable.
Using HDMI, the DVD player transmits a digital video and audio signal and displays a vivid picture on
a TV having an HDMI input jack.
● HDMI connection description
HDMI consists of uncompressed video and digital audio data (LPCM or Bit Stream).
- The player outputs only a pure digital signal to the TV through HDMI.
- If TV does not support HDCP (High-bandwidth Digital Content Protection), snow noise appears on the
screen.
● Why does Samsung use HDMI?
HDMI provides an interface between any compatible digital audio/video source, such as a set-top box, a
DVD player, a PC, a video game system, or an AV receiver and a compatible digital audio and/or video
monitor, such as a digital television (DTV).
HDMI supports any TV or PC video format with digital high-definition pictures.
Downloaded From Disc-Player.com Samsung Manuals
ENG-15
CONNECTIONS
Connecting to a TV (Progressive)
1
Using Component video cables (not included),
connect the COMPONENT VIDEO OUT jacks on
the rear of the DVD-VCR to the COMPONENT IN
jacks of your TV.
2
Using the audio cables, connect from the AUDIO
OUT or LINE OUT AUDIO (red and white) jacks
on the rear of the DVD-VCR to the AUDIO (red
and white) IN jacks of your TV.
White
Red
Green Blue Red
Turn on the DVD-VCR and TV.
Audio Cable
3
Red
White
Component Cable
(not included)
Red
Blue Green
With the unit in Stop mode, set the video output
to P-SCAN by pressing the P.SCAN button on the
front panel until the Progressive Scan mode
prompt screen appears. Then press ENTER and
progressive will be output.
4
Press the input selector on your TV remote
control until the Component signal from the
DVD-VCR appears on the TV screen.
To see the progressive video output,
- Consult your TV User’s Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan
settings in the TV’s menu system.
- Depending on your TV, the connection method may differ from the illustration above.
Note
What is "Progressive Scan"?
Progressive scan has twice as many scanning lines as the interlace output method.
Progressive scanning method provides better and clearer picture quality.
The Component Video jacks only output video from the DVD player. To view video from the VCR, you must have
the Video/Line Out (yellow) jack connected.
Only the 480p output resolution is possible with Component.
Downloaded From Disc-Player.com Samsung Manuals
ENG-16
CONNECTIONS
Connecting to a TV (Interlace)
- Connecting to your TV using Component video cables.
- You will enjoy high quality and accurate color reproduction images. Component video separates the picture
element into black and white(Y), blue(PB), red(PR) signals to present clear and clean images. (Audio signals
are delivered through the audio out or line out audio).
1
Using Component video cables (not included),
connect the COMPONENT VIDEO OUT jacks on
the rear of the DVD-VCR to the COMPONENT IN
jacks of your TV.
2
Using the audio cables, connect from the AUDIO
OUT or LINE OUT AUDIO (red and white) jacks
on the rear of the DVD-VCR to the AUDIO (red
and white) IN jacks of your TV.
White
Blue
Red
Turn on the DVD-VCR and TV.
Audio Cable
3
Red
White
Green
Red
Component Cable
(not included)
Red
Blue Green
With the unit in Stop mode, set the video output
to I-SCAN by pressing the P.SCAN button on the
front panel until the Interlace Scan mode prompt
screen appears. Then press ENTER and
interlace will be output.
4
Press the input selector on your TV remote
control until the Component signal from the DVDVCR appears on the TV screen.
Notes
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 19 to 20)
- The component jack of your TV may be marked “R-Y, B-Y, Y” or “Cr, Cb, Y” instead of “PR, PB, Y”
depending on the manufacturer. The number and position of jacks may vary depending on the TV set.
Please refer to the user's manual of your TV.
- The Component Video Out jacks only output video from the DVD player. To view video from the VCR, you
must have the Video Out (Yellow) jack connected.
- You can hear sound from the LINE OUT AUDIO or AUDIO OUT (red and white) jacks with a Component
connection. VCR audio only outputs through Line Out Audio jacks (Red,White).
Downloaded From Disc-Player.com Samsung Manuals
ENG-17
CONNECTIONS
Connecting to a TV (Video)
1
Using video/audio cables, connect the VIDEO
(yellow)/AUDIO (red and white) OUT jacks on
the rear of the DVD-VCR to the VIDEO
(yellow)/AUDIO (red and white) IN jacks of your
TV.
2
Yellow
Turn on the DVD-VCR and TV.
Video Cable
Yellow
Red
White
Audio Cable
Red
White
3
Press the input selector on your TV remote
control until the Video signal from the DVD-VCR
appears on the TV screen.
Notes
- Noise may be generated if the audio cable is placed too close to the power cable.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page.
(See pages 19 to 20).
- The number and position of jacks may vary depending on your TV set. Please refer to the user's manual of
your TV.
- If there is one audio input jack on the TV, connect it to the LINE OUT AUDIO OUT Left (white) jack of the
DVD-VCR.
- If you press the P.SCAN button when DVD-VCR is in Stop mode or no disc is inserted, the Video Out mode
changes in the following sequence: (I-SCAN, P-SCAN, Composite)
- When you connect an external device (STB or VCR) and play it through the LINE IN 1 jack of the DVD-VCR,
you can still see the display on your TV set although the DVD-VCR set has been turned off.
Downloaded From Disc-Player.com Samsung Manuals
ENG-18
CONNECTIONS
Connection to an Audio System
Connecting to an Audio System (2 Channel Amplifier, Analog)
1
Using the audio cables, connect the (LINE)
AUDIO (red and white) OUT jacks on the rear of
the DVD-VCR to the AUDIO (red and white) IN
jacks of the Amplifier.
2
Using the video signal cable(s), connect the
VIDEO or COMPONENT OUT jacks on the rear
of the DVD-VCR to the VIDEO or COMPONENT
IN jack of your TV as described on pages 14 to
18.
Red
White
Audio Cable
Red
White
3
2-channel
Stereo Amp.
Turn on the DVD-VCR, TV, and Amplifier.
4
Press the input select button of the Amplifier to
select the External input in order to hear sound
from the DVD-VCR.
Refer to your Amplifier's user manual to set the
Amplifier's audio input.
Notes
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage
to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 52 to 53)
- The position of jacks may vary depending on the Amplifier.
Please refer to your Amplifier's user manual .
- You can also connect the amplifier using the AUDIO OUT (red and white) jacks from the DVD-VCR.
Downloaded From Disc-Player.com Samsung Manuals
ENG-19
CONNECTIONS
Connecting to an Audio System (Dolby digital, MPEG2 or DTS
Amplifier)
1
Using a Coaxial cable or an Optical cable (not
included), connect the DIGITAL AUDIO OUT
(COAXIAL) or DIGITAL AUDIO OUT (OPTICAL)
jack on the rear of the DVD-VCR to the DIGITAL
AUDIO IN (COAXIAL) or DIGITAL AUDIO IN
(OPTICAL) jack of the Amplifier.
2
Using the video signal cable(s), connect the
VIDEO or COMPONENT OUT jacks on the rear
of the DVD-VCR to the VIDEO or COMPONENT
IN jack of your TV as described on pages 14 to
18.
Optical Cable
(not included)
3
Coaxial Cable
(not included)
Dolby digital or
DTS Amp.
Turn on the DVD-VCR, TV, and Amplifier.
4
Press the input select button of the Amplifier to
select external input in order to hear sound from
the DVD-VCR.
Refer to your Amplifier's user manual to set the
Amplifier's audio input.
Notes
- When you connect the DVD-VCR to a DTS Amplifier and play a DTS disc, set the DTS to On in the
Audio Setup menu. If it is set to Off, sound will not be heard, or there will be a loud sound.
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage
to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier. (See pages 52 to 53)
- The jack position may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
Downloaded From Disc-Player.com Samsung Manuals
ENG-20
CONNECTIONS
Connecting the Power Cord
1
Your DVD-VCR's power cord should be plugged
into a standard 120V/60Hz wall outlet.
2
Turn on the power by pressing the POWER
button on the remote control or
on the front
panel.
3
Turn on your TV by pressing the POWER button
on the TV remote control.
4
Press the input selector on your TV remote until
the signal from the DVD-VCR appears.
Downloaded From Disc-Player.com Samsung Manuals
ENG-21
Chapter 3
INITIAL SETUP
Selecting a Menu Language
Follow these steps to change the on-screen MENU language to English, French or Spanish.
1
Press the MENU button.
2
Press the œƒ buttons to
select Setup, then press the ‹
or ENTER button.
3
Press the œƒ buttons to
select Language, then press
the ‹ or ENTER button.
4
Press the œƒ buttons to
select the appropriate
language : English, Français
or Español.
Press the ENTER button.
5
Press the MENU button to exit.
Downloaded From Disc-Player.com Samsung Manuals
ENG-22
INITIAL SETUP
Setting the Clock
This menu is used to set the current time. You need to set the time to use timer recording.
Setting the Clock Manually
If Auto Setup fails to set the DVD-VCR’s internal clock by locating a local TV station, follow these steps to set
the date and time manually.
Note: For accurate Timer Recording, your DVD-VCR's internal clock must be set correctly.
1
Press the MENU button.
2
Press the œƒ buttons to
select Setup, then press the ‹
or ENTER button.
3
Press the œƒ buttons to
select Clock, then press the ‹
or ENTER button.
4
Use the ¦‹ buttons to select
each of the following options,
then use the œƒ buttons to
set each option.
Press the ENTER button to set
the clock.
6
Press the MENU button to exit.
Downloaded From Disc-Player.com Samsung Manuals
ENG-23
INITIAL SETUP
Setting the Front Panel Display
You can set the Front Panel Display to be bright, dim, or to automatically dim during power off.
1
Press the MENU button.
2
Press the œƒ buttons to
select Setup, then press the ‹
or ENTER button.
3
Press the œƒ buttons to
select Front Display, then
press the ‹ or ENTER button
to select Auto, Bright or Dim.
4
Press the MENU button to exit.
■
Auto:
Front Panel Display will dim automatically
during power off.
■
Bright: Front Panel Display will be bright.
■
Dim:
Front Panel Display will be dim.
Downloaded From Disc-Player.com Samsung Manuals
ENG-24
INITIAL SETUP
Setting the Auto Power Off
This feature automatically turns off your DVD-VCR if no signal is received and you do not press any buttons for
the selected time.
1
Press the MENU button.
2
Press the œƒ buttons to
select Setup, then press the ‹
or ENTER button.
3
Press the œƒ buttons to
select Auto Power Off, then
press the ‹ or ENTER button
to select Off, 1Hr or 2Hr.
4
Press the MENU button to exit.
■
Off: Auto power off is disabled.
■
1Hr: DVD-VCR will auto shut off 1 hour after the last button
is pressed or no signal is received.
■
2Hr: DVD-VCR will auto shut off 2 hours after the last button
is pressed or no signal is received.
Downloaded From Disc-Player.com Samsung Manuals
ENG-25
Chapter 4
D V D O P E R AT I O N S
Playing a Disc
Before Play
- Turn on your TV and set it to the correct Video Input on your TV's remote control.
- If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
Playback
1
Press the OPEN/CLOSE (
button on the front panel.
)
2
Place a disc gently into the tray
with the disc’s label facing up.
3
Press the
(Play/Pause)
button on your remote control
or on the front panel.
Most discs will start to play
back as soon as the tray
closes.
▼
4
Stopping Play
Press the (Stop) button
during play.
Downloaded From Disc-Player.com Samsung Manuals
ENG-26
Stop/Resume
- Press the (Stop) button once to
stop playback. To resume the
DVD/CD from the point where the
disc stopped, press the
(Play/Pause) button.
- Press the (Stop) button twice to
completely stop playback. The next
time you press the
(Play/Pause),
the disc will start over from the
beginning.
D V D O P E R AT I O N S
▼
5
Pausing Play
Press the
(Play/Pause)
button on your remote control
or on the front panel during
play.
Note
If the player is left for about 5 minutes in
pause mode, it will stop.
▼
- Each time the button is pressed, a
new frame will appear.
- No sound is heard during STEP
mode.
- Press the
(Play/Pause) button to
resume normal play.
- You can only perform step motion
play in the forward direction.
▼
- No sound is heard during slow mode.
- Press the
(Play/Pause) button to
resume normal play.
6
Step Motion Play (Except CD)
Press the F.ADV button on the
remote control during play.
7
Slow Motion Play (Except CD)
Press the / (Search) button
to choose the play speed
between 1/8, 1/4 and 1/2 of
normal during PAUSE or STEP
mode.
Note
- This (
) icon indicates an invalid button
press.
- The Slow Motion feature works in both the
forward and reverse directions.
8
Removing Disc
Press the OPEN/CLOSE (
button on the front panel.
)
Downloaded From Disc-Player.com Samsung Manuals
- Screen stops, no sound.
- To resume, press the
(Play/Pause) button once again.
ENG-27
D V D O P E R AT I O N S
Using the Search and Skip Functions
During play, you can search quickly through a chapter or track, and use the skip function to jump to the next
selection.
Searching through a Chapter or Track
▼
If you want to search at a faster speed
on the DVD or CD, press the
/
(Search) button repeatedly.
During play, press the
/
(Search) buttons on the remote
control for more than one
second.
DVD 2X, 4X, 64X, 128X
CD 2X, 4X, 8X
Notes
- The speed marked in this function may be
different from the actual playback speed.
- No sound is heard during search mode
(Except CD).
Skipping Tracks
During play, press the
(Skip) buttons.
/
- When playing a DVD, if you press the
(Skip) button,
it moves to the next chapter. If you press the
(Skip)
button, it moves to the beginning of the chapter.
Pressing the Skip button twice will make the DVD move to
the beginning of the previous chapter.
- When playing a CD, if you press the
(Skip) button, it
moves to the next track. If you press the
(Skip) button, it
moves to the beginning of the track. One more press makes
it move to the beginning of the previous track.
Downloaded From Disc-Player.com Samsung Manuals
ENG-28
D V D O P E R AT I O N S
Using the Display Function
When Playing a DVD/MPEG4
▼
You can select information in the
DVD Function menu by pressing the
MENU button.
1
During play, press the INFO
button on the remote control.
2
DVD
Press the œƒ buttons to
select the desired item.
Enter
MPEG4
MP3
Off
Enter
▼
You may use the number buttons of the
remote control to directly access a title,
chapter or time to start the playback
from a desired time.
3
Press the ¦‹ buttons to
make the desired setup and
then press the ENTER button.
Downloaded From Disc-Player.com Samsung Manuals
ENG-29
D V D O P E R AT I O N S
4
To exit the menu, press the
INFO button again.
Note
TITLE
To access the desired title when there is more than one on the disc.
For example, if there is more than one movie on a DVD, each movie will be identified.
Most DVD discs are recorded in chapters so that you can quickly find a specific scene
CHAPTER
TIME
AUDIO
SUBTITLE
Allows playback of the film from a desired time. You must enter the starting time as a reference.
The time search function does not operate on some discs.
Refers to the film's soundtrack language. In the example, the soundtrack is played in English 5.1CH.
A DVD disc can have up to eight different soundtracks. The MP3, AC3 and WMA are supported.
(DivX)
Refers to the subtitle languages available in the disc.
You will be able to choose the subtitle languages or, if you prefer, turn them off from the screen.
A DVD disc can have up to 32 different subtitles.
Downloaded From Disc-Player.com Samsung Manuals
ENG-30
D V D O P E R AT I O N S
Using the Disc and Title Menu (DVD)
▼
1
During playback of a DVD disc,
press the MENU button on the
remote control.
The MENU button can be used to
access Disc and title menus on a DVD
during playback.
2
Press the œƒ buttons to
select Function, then press
the ‹ or ENTER button.
3
Press the œƒ buttons to
select DVD Function, then
press the ‹ or ENTER
button.
Notes
- Depending on the disc, the Disc Menu or
Title Menu may not work.
- You can also use the Disc Menu by using
the DISC MENU button on the remote
control.
- The Title Menu will only be displayed if
there are at least two titles on the disc.
- The Title Menu works only with DVDs.
4
Press the œƒ buttons to
select Title Menu or Disc
Menu then press the ‹ or
ENTER button.
Downloaded From Disc-Player.com Samsung Manuals
ENG-31
D V D O P E R AT I O N S
Using the Function Menu (DVD)
▼
The MENU button can be used to
access DVD functions such as Info,
Zoom, Bookmark, Repeat and EZ view
menu during DVD playback.
▼
You can also directly select these
functions using their respective buttons
on the remote control.
- INFO
- MARK
- REPEAT
- ZOOM
- EZ VIEW
1
During the playback of a DVD
disc, press the MENU button
on the remote control.
2
Press the œƒ buttons to
select Function, then press
the ‹ or ENTER button.
3
Press the œƒ buttons to
select DVD Function, then
press the ‹ or ENTER button.
- Info
(See pages 29 to 30)
- Zoom (See page 41)
- Bookmark
(See pages 39 to 40)
- Repeat (See pages 33)
- EZ View
(See pages 35 to 36)
4
Press the œƒ buttons to
select one of the five functions.
Then press the ‹ or ENTER
button to access the function.
Downloaded From Disc-Player.com Samsung Manuals
ENG-32
D V D O P E R AT I O N S
Repeat Play
Repeat the current chapter, title, a chosen section (A-B), or all of the disc.
When playing a DVD
1
During play, press the REPEAT
button on the remote control.
Repeat screen appears.
- DVD repeats play by chapter or title,
and CDs repeat play by disc or.
- Chapter ( ): repeats the chapter that
is playing.
- Title ( ): repeats the title that is
playing.
- A-B: repeats a segment of the disc
that you select.
▼
2
DVD
Press the ¦‹ buttons to
select Chapter, Title or A-B,
then press the ENTER
button.
Off
01
T
01 A - B
ENTER REPEAT
T
Using the A-B Repeat function
1. Press the REPEAT button on the remote control.
2. Press the ¦/‹ button to select A-B button.
3. Press the ENTER button at the point where you want repeat play to start (A).
B is automatically highlighted.
4. Press the ENTER button at the point where you want the repeat play to stop (B).
- To return to normal play, press the CANCEL button.
Note
A-B REPEAT allows you to set point (B) 5 seconds after point (A) has been set.
3
To return to normal play,
press REPEAT button
again, then press the
¦/‹ buttons to select Off
and press ENTER button.
DVD
Off
Downloaded From Disc-Player.com Samsung Manuals
01
T
01 A - B
ENTER REPEAT
Note
- Depending on the disc, the Repeat
function may not work.
ENG-33
D V D O P E R AT I O N S
Slow Play
This feature allows you to slowly to repeat scenes containing sports, dancing, musical instruments being
played etc., so you can study them more closely.
When playing a DVD
1
During play, press the
PLAY/PAUSE ( ) button.
2
Press the SEARCH ( / )
button to choose the play speed
between 1/2, 1/4 and 1/8 of
normal speed during PAUSE
or STEP mode.
Downloaded From Disc-Player.com Samsung Manuals
ENG-34
D V D O P E R AT I O N S
Adjusting the Aspect Ratio (EZ View)
Set the aspect ratio (length x width) of your TV screen so the DVD-VCR will display movies at the appropriate
size for your television.
To Playback using Aspect Ratio (DVD)
▼
The EZ View feature is not available
when the A-B Repeat function is
activated.
Press the EZ VIEW button on
the remote control.
- The screen size changes
when the button is pressed
repeatedly.
- The screen zoom mode
operates differently
depending on the screen
setting in the Display Setup
menu.
- To ensure correct operation
of the EZ VIEW button, you
should set the correct
aspect ratio in the Display
Setup menu.
(See pages 54 to 57).
WIDE SCREEN
EZ VIEW
If you are using a 16:9 TV
For 16:9 aspect ratio discs
- WIDE SCREEN
Displays the content of the DVD title in 16:9
aspect ratio.
- SCREEN FIT
The top and bottom portions of the screen are
cut off. When playing a 2.35:1 aspect ratio disc,
the black bars at the top and bottom of the
screen will disappear. The picture will look
vertically stretched. (Depending on a type of disc,
the black bars may not disappear completely.)
- ZOOM FIT
The top, bottom, left and right of the screen are
cut off and the central portion of the screen is
enlarged.
Downloaded From Disc-Player.com Samsung Manuals
For 4:3 aspect ratio discs
- NORMAL WIDE
Displays the content of the DVD title in 16:9
aspect ratio. The picture will look horizontally
stretched.
- SCREEN FIT
The top and bottom portions of the screen are
cut off and the full screen appears. The picture
will look vertically stretched.
- ZOOM FIT
The top, bottom, left and right portions of the
screen are cut off and the central portion of the
screen is enlarged.
- VERTICAL FIT
When a 4:3 DVD is viewed on a 16:9 TV, black
bars will appear at the left and right of the screen
in order to prevent the picture from looking
horizontally stretched.
ENG-35
D V D O P E R AT I O N S
If you are using a 4:3 TV
For 16:9 aspect ratio discs
- 4:3 Letter Box
Displays the content of the DVD title in 16:9
aspect ratio. The black bars will appear at the top
and bottom of the screen.
- 4:3 Pan Scan
The left and right portions of the screen are cut
off and the central portion of the 16:9 screen is
displayed.
- SCREEN FIT
The top and bottom portions of the screen are
cut off and a full screen appears. The picture will
look vertically stretched.
For 4:3 aspect ratio discs
- NORMAL SCREEN
Displays the content of the DVD title in 4:3
aspect ratio.
- SCREEN FIT
The top and bottom portions of the screen are
cut off and the full screen appears. The picture
will look vertically stretched.
- ZOOM FIT
The top, bottom, left and right portions of the
screen are cut off and the central portion of the
screen is enlarged.
- ZOOM FIT
The top, bottom, left and right of the screen are
cut off and the central portion of the screen is
enlarged.
Note
This function may work differently depending on the type of disc.
Downloaded From Disc-Player.com Samsung Manuals
ENG-36
D V D O P E R AT I O N S
Selecting the Audio Language
You can select a desired audio language quickly and easily with the AUDIO button.
Using the AUDIO button (DVD/MPEG4)
Notes
- To change the desired audio in the Disc
Menu, press the DISC MENU button.
- This function depends on what audio
languages are encoded on the disc and
may not work on all DVDs.
- A DVD disc can contain up to 8 audio
languages.
- To have the same audio language come
up whenever you play a DVD, see pages
50 to 51.
1
During play, press the
AUDIO button.
Audio languages change
‹button is
when the ¦/‹
pressed repeatedly.
The audio languages are
represented by
abbreviations.
ENG DOLBY DIGITAL 5.1CH
AUDIO
MPEG4
MPEG4 is a compressed video format
designed to deliver DVD quality video at
lower data rates and smaller file sizes.
▼
Press the AUDIO button
on the remocon
repeatedly to select the
desired Audio (MP3,
PCM, WMA, AC3 and
MPEG) on MPEG4 discs
then press the ENTER .
DVD
PCM 1/2
AUDIO
Types of MPEG4 files are DivX or Xdiv.
These files have an .avi extension.
2
To remove the AUDIO icon,
press the CLEAR or
RETURN button.
Downloaded From Disc-Player.com Samsung Manuals
ENG-37
D V D O P E R AT I O N S
Selecting the Subtitle Language
You can select a desired subtitle quickly and easily with the SUBTITLE button.
Using the SUBTITLE button (DVD/MPEG4)
Notes
- To change the desired subtitle in the Disc
Menu, press the DISC MENU button.
- This function depends on what subtitles
are encoded on the disc and may not
work on all DVDs.
- A DVD disc can contain up to 32 subtitle
languages.
- To have the same subtitle language come
up whenever you play a DVD,
see pages 50 to 51.
1
During play, press the
SUBTITLE button.
The subtitle changes when
the button is pressed
repeatedly.
The subtitle languages are
represented by abbreviations. DVD
Off
SUBTITLE
MPEG4
An External subtitle option
will appear depending on
the DivX Disc.
Subtitle Selection
External Subtitle Off
readme.TXT
Non-standard fonts are not supported
Enter
Press Subtitle button on
the remocon repeatedly
to select the desired
subtitle language on an
MPEG4 disc.
Return
Menu
MPEG4
Off
SUBTITLE
2
To exit the SUBTITLE
menu, press the CLEAR or
RETURN button.
Downloaded From Disc-Player.com Samsung Manuals
ENG-38
D V D O P E R AT I O N S
Changing the Camera Angle
When a DVD contains multiple angles of a particular scene, you can use the ANGLE function.
Using the ANGLE button (DVD)
If the disc contains multiple angles, the ANGLE (
) icon appears on the screen.
1
Press the ANGLE button,
then the ANGLE ( ) icon
will appear with the current
angle number and the
number of angles available.
Note
If the disc has only one angle, this feature
won’t work. Currently, very few discs have
this feature.
2
Press the ¦‹ button
repeatedly to select the
desired angle. To remove the
ANGLE ( ) icon, press the
CLEAR or RETURN button.
4/6
Using the Bookmark Function
This feature lets you bookmark sections of a DVD so you can quickly find them at a later time.
Using the MARK button (DVD)
1
During play, press the MARK
button on the remote control.
Note
Depending on the disc, the Bookmark
function may not work.
2
When you reach the scene
you want to mark, press the
ENTER button. Up to three
scenes may be marked at a
time.
Downloaded From Disc-Player.com Samsung Manuals
ENG-39
D V D O P E R AT I O N S
Recalling a Marked Scene
1
During play, press the MARK
button on the remote control.
2
CLEAR
Press the ¦‹ buttons to
select a marked scene.
3
Press the
(Play/Pause)
button to play the marked
scene.
Clearing a Bookmark
1
During play, press the MARK
button on the remote control.
2
Press the ¦‹ buttons to
select the bookmark
number you want to delete.
CLEAR
3
Press the CLEAR button to
delete a bookmark number.
Downloaded From Disc-Player.com Samsung Manuals
ENG-40
D V D O P E R AT I O N S
Using the Zoom Function (DVD)
1
During the playback of a DVD
disc, press the MENU button
on the remote control.
2
Press the œƒ buttons to
select Function, then press
the ‹ or ENTER button.
3
Press the œƒ buttons to
select DVD Function, then
press the ‹ or ENTER button.
4
Press the œƒ buttons to
select Zoom, then press the
‹ or ENTER button.
▼
5
Press the œƒ or ¦‹
buttons to select the part of
the screen you want to
zoom in on.
You can also select the Zoom function
directly using ZOOM button on the
remote control.
Note
Depending on the disc, the Zoom function
may not work.
Press the ENTER button.
Downloaded From Disc-Player.com Samsung Manuals
During DVD play, press ENTER to
zoom in 2X/4X/2X/Normal in order.
ENG-41
D V D O P E R AT I O N S
Clips Menu for CDAudio/ MP3/ WMA/JPEG/
MPEG4
Discs with MP3/WMA/JPEG/MPEG4 contain individual songs and/or pictures that can be organized into folders
as shown below. They are similar to how you use your computer to put files into different folders.
1
Stop
Off
00:00:00
T
Open the disc tray.
WMA
JPEG
MP3
2
MPEG4
Place the disc on the tray.
Enter
3
Close the tray.
The tray closes and this
screen displays.
Parent Folder,
Current Folder and
Peer Folders
Menu
Return
JPEG file display
-
: Name of currently playing file.
-
: CD Audio file icon.
-
: Current Playback Time.
-
: MP3 file icon.
-
: Current Playback Mode : There are four
modes. They can be selected in order by
pressing the REPEAT button.
- Off: Normal Playback
- Track: Repeats the current track.
- Folder: Repeats the current folder.
- Random: Files on the disc will be played
in random order.
-
: WMA file icon.
-
: JPEG file icon.
-
: AVI file icon.
-
: Folder icon.
-
: Current Folder icon.
Folder Selection
Folder can only be selected in the Stop mode.
- To select the Parent Folder
Press the RETURN button to go to the parent
folder, or press the œƒ buttons to select “..” and
press the ENTER button to go to the parent folder.
- To select the Peer Folder
Press the œƒ buttons to select the desired folder,
then the ENTER button.
Root
WMA
JPEG
Parent Folder
MP3
MUSIC
Current Folder
1st
- To select the Sub-Folder
Press the œƒ buttons to select the desired folder,
then press the ENTER button.
Sub-Folders
2nd
SONG FILE 1
Peer Folders
SONG FILE 2
SONG FILE 3
MPEG4 FILES
Downloaded From Disc-Player.com Samsung Manuals
ENG-42
D V D O P E R AT I O N S
CD Audio/MP3/WMA Playback
1
Open the disc tray.
Stop
O fO
f ff
00:00:00
1 _Tm p 3
00:00:23
WMA
JPEG
2
MP3
MPEG4
B e c a u s e Yo u
Cactus
Place the disc on the tray.
Sad Day
Enter
Wonderful
Return
Menu
3
Close the tray.
Press the œƒ buttons to
select a song file.
Press the ENTER button to
begin playback of the song
file.
▼
4
Play
Off
Off
00:00:23
B e c a u s e Yo u
1 _Tm p 3
00:00:23
...
B e c a u s e Yo u
Cactus
Sad Dayu
B e c a u s e Yo u
Wonderful
Cactus
Sad Day
Enter
Wonderful
REPEAT Repeat
Return
Repeat/Random playback
During play, press the
REPEAT button to change
the playback mode. There
are four modes.
Off, Track, Folder and
Random.
- Off: Normal Playback
- Track: Repeats the current song file.
- Folder: Repeats the song files which have the
same extension in the current folder.
- Random: Song files which have the same
extension will be played in random order.
To resume normal play, press the CLEAR button.
Downloaded From Disc-Player.com Samsung Manuals
ENG-43
When a disc or a folder contains both
MP3 and WMA files, only one type will
be played, not both.
D V D O P E R AT I O N S
CD-R MP3/WMA file
- Use a decompression transfer rate of at least
64Kbps when recording WMA files.
When you record MP3 or WMA files on a CD-R,
please refer to the following.
Sound quality with WMA files basically depends
on the rate of compression/decompression you
choose.
- Your MP3 or WMA files should be ISO 9660 or
JOLIET format.
ISO 9660 format and Joliet MP3 or WMA files are
compatible with Microsoft's DOS and Windows,
and with Apple's Mac. This format is the most
widely used.
Getting CD audio sound requires an
analog/digital sampling rate, that is conversion to
WMA format, of at least 64Kbps and up to
192Kbps.
- When naming your MP3 or WMA files, do not
exceed 8 characters, and enter “.mp3, .wma”
as the file extension.
Conversely, files with decompression rates below
64Kbps or over 192Kbps will not be played
properly.
General name format : Title.mp3. or Title.wma.
When composing your title, make sure that you
use 8 characters or less, have no spaces in the
name, and avoid the use of special characters
including: (.,/,\,=,+).
- Do not try recording copyright protected MP3
files.
Certain "secured" files are encrypted and code
protected to prevent illegal copying. These files
are of the following types: Windows MediaTM
(registered trade mark of Microsoft Inc) and
SDMITM (registered trade mark of The SDMI
Foundation). You cannot copy such files.
- Use a decompression transfer rate of at least
128 Kbps when recording MP3 files.
Sound quality with MP3 files basically depends
on the rate of compression/decompression you
choose. Getting CD audio sound requires an
analog/digital sampling rate, that is conversion to
MP3 format, of at least 128 Kbps and up to 160
Kbps. However, choosing higher rates, like 192
Kbps or more, only rarely give better sound
quality. Conversely, files with decompression
rates below 128 Kbps will not be played properly.
- Important:
The above recommendations cannot be taken as
a guarantee that the DVD-VCR will play MP3
recordings, or as an assurance of sound quality.
You should note that certain technologies and
methods for MP3 file recording on CD-Rs
prevent optimal playback of these files on your
DVD-VCR (degraded sound quality and in some
cases, inability of the player to read the files).
- This unit can play a maximum of 500 files and
500 folders per disc.
Downloaded From Disc-Player.com Samsung Manuals
ENG-44
D V D O P E R AT I O N S
MPEG4 Playback
MPEG4 Play Function
AVI files are used to contain the audio and video data. Only AVI format files with the
“.avi” extensions can be played.
1
Stop
Open the disc tray.
Place the disc on the tray.
Close the tray.
Off
T
00:00:00
WMA
JPEG
MP3
MPEG4
Enter
Menu
Return
2
ƒor ¦‹
‹
Press the œƒ
buttons to select an avi file
(DivX/XviD), then press the
ENTER button.
Stop
Off
/MPEG4
T
00:00:00
...
a01_divx51b-8
a02_divx505b-8
a03_divx502sp-8
a04_divx412-8
Enter
Return
Menu
Repeat Playback
1
Press the REPEAT button to
change playback mode. There
are 3 modes, such as Off,
Title, Folder
- Off : Normal playback.
- Title : Repeats the title
that is playing.
- Folder : Repeats the AVI
files which have the
same extension in the
current folder.
Downloaded From Disc-Player.com Samsung Manuals
ENG-45
D V D O P E R AT I O N S
MPEG4 Function Description
Function
Description
During play, press the
or
button,
it
moves
forward
)
or backward 5 minutes.
During play, press the SEARCH
( or ) button and press
Search
again to search at a faster
(
or
) speed. Allows you to search
at a faster speed in an AVI
file. (2X, 4X, 8X)
Allows you to search at a
Slow Motion slower speed in an AVI file.
Play
(1/8X, 1/4X, 1/2X)
Each time the STEP button
Step Motion is pressed, a new frame will
Play
appear.
Skip
(
or
ZOOM
Allows you to zoom in on the
screen 2X/4X/2X/Normal in
order
Reference page
-
-
P 26
P 26
P 41
- These functions may not work depending on
MPEG4 file.
CD-R AVI file
This unit can play the following video compression
formats within the AVI file format:
- DivX 3.11 contents
- DivX 4 contents (Based on MPEG4 Simple Profile)
- DivX 5 contents (MPEG4 simple profile plus
additional features such as bi-directional frames.
Qpel and GMC are also supported.)
- XviD MPEG4 compliant Contents.
This unit supports all resolutions up to maximum
below.
DivX3.11 & DivX4 & XviD
DivX5
Bitrate may fluctuate:
Device may skip decoding
the high bitrate portions
and begin decoding again
when Bitrate returns to
normal.
720 x 480 @30fps
720 x 576 @25fps
: Maximum bitrate : 4Mbps
Notes
- Some MPEG4 files created on a personal computer may not be able to be played back.
That is why Codec Type, Version and Higher resolution higher than the specifications are
not supported.
- This unit supports CD-R/RW written in MPEG4 in accordance with the “ISO9660 format”.
Downloaded From Disc-Player.com Samsung Manuals
ENG-46
D V D O P E R AT I O N S
Picture CD Playback
Stop
1
Off
T
Select the desired folder
then press the ENTER
button.
JPEG
MP3
MPEG4
Enter
Return
Stop
2
00:00:00
WMA
Off
00:00:00
Picture 1
Press the œƒ buttons to
select a Picture file in the
clips menu, then press the
ENTER button.
Menu
...
Picture 1
Picture 2
Picture 3
Enter
3
Menu
Return
Notes
- Press the (Stop) button to return to the
clips menu.
- When playing a Kodak Picture CD, the
unit displays the Photo directly, not the
clips menu.
> >
Press the INFO. button to
display the menu.
> >
Press the ¦‹ buttons to
select the menu you want to
view, then press the ENTER
button.
Rotation
> >
Slide Show
: Each time the ENTER button is pressed,
the picture rotates 90 degrees clockwise.
TIMER:
> >
Zoom
ƒ button to select the part of the
:- Press the œƒ
screen you want to zoom in on.
Press the ENTER button. Each time the
ENTER button is pressed, the picture is
enlarged up to 4X. (2X ➝ 4X ➝ 2X ➝ Normal).
- You can also select the Zoom function by
pressing the ZOOM button on the remote
control.
-
: The unit enters slide show mode.
- Before beginning the Slide Show, the picture
interval must be set.
-
: When this icon is selected and ENTER is
pressed, the pictures change automatically
with about a 6 second interval.
-
: The pictures change automatically with
about a 12 second interval.
-
: The pictures change automatically with
about a 18 second interval.
Notes
- Depending on a file size, the amount of time between each picture may be different from the set interval time.
- If you don’t press any button, the slide show will start automatically in about 10 seconds by default.
Downloaded From Disc-Player.com Samsung Manuals
ENG-47
D V D O P E R AT I O N S
CD-R JPEG Discs
- Only files with the “.jpg” and “.JPG” extensions can be played.
- If the disc is not finalized, it will take longer to start playing and not all of the recorded files may be played.
- Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played.
- The name of the JPEG file may not be longer than 8 characters and should contain no blank spaces or
special characters (. / = +).
- Only a consecutively written multi-session disc can be played. If there is a blank segment in the multisession disc, the disc can be played only up to the blank segment.
- A maximum of 3000 images can be stored on a single CD.
- Kodak Picture CDs are recommended.
- When playing a Kodak Picture CD, only the JPEG files in the pictures folder can be played.
- Kodak Picture CD: The JPEG files in the pictures folder can be played automatically.
- Konica Picture CD: If you want to see the Picture, select the JPEG from the clips menu.
- Fuji Picture CD: If you want to see the Picture, select the JPEG from the clips menu.
- QSS Picture CD: The unit may not play a QSS Picture CD.
- If the number of files on one Disc is over 500, only the first 500 JPEG files can be played.
- If the number of folders on one Disc is over 500, only JPEG files in the first 500 folders can be played.
Downloaded From Disc-Player.com Samsung Manuals
ENG-48
D V D O P E R AT I O N S
Using the Setup Menu
The Setup menu lets you customize your DVD-VCR by allowing you to select various language preferences,
set up a parental level, and even adjust the player to the type of television screen you have.
1
With the unit in Stop mode,
press the MENU button on the
remote control.
2
Press the œƒ buttons to
select DVD, then press the
‹ or ENTER button.
ΠLanguage Setup: Setup of the Language.
´ Audio Setup: Setup of the Audio Options.
ˇ Display Setup:Setup of the Display Options. Used to select which type of screen you want to watch and
several display options.
¨ Parental Setup: Setup of the Parental Level. Allows users to set the level necessary to prevent children from
viewing unsuitable movies such as those with violence, adult subject matter, etc.
ˆ DivX(R) Registration: Please use the Registration code to register this player with the DivX(R)
Video On Demand format. To learn more go to www.divx.com/vod.
(see page 61)
3
Press the œƒ buttons to
access the different
features. Press the ‹ or
ENTER button to access the
sub features.
4
To make the DVD setup screen
disappear after setting up,
press the MENU button again.
Downloaded From Disc-Player.com Samsung Manuals
Note
Depending on the disc, some DVD Setup
menu selections may not work.
ENG-49
D V D O P E R AT I O N S
Setting Up the Language Features
If you set the audio and subtitle language in advance, the settings will automatically be applied every time you
watch a movie.
1
With the unit in Stop mode,
press the MENU button on the
remote control.
2
Press the œƒ buttons to
select DVD, then press the
‹ or ENTER button.
3
Press the œƒ buttons to
select Language Setup,
then press the ‹ or ENTER
button.
4
Press the œƒ buttons to
select the desired item, then
press the ‹ or ENTER
button.
▼
5
Press the œƒ buttons to
select the desired language,
then press the ‹ or ENTER
button.
Downloaded From Disc-Player.com Samsung Manuals
- Once the language is selected, the
screen returns to the Language
Setup menu.
- To make the DVD Setup menu
disappear, press the MENU button.
ENG-50
D V D O P E R AT I O N S
Language Function
▼
- If the selected language is not
recorded on the disc, the original prerecorded language is selected.
▼
- Select “Original” if you want the
default soundtrack language to be
the original language the disc is
recorded in.
Disc Menu
To set the Disc Menu
Language to your preferred
language, follow these steps.
If your preferred language is
available on a DVD, your
Disc Menu Language will
automatically be set to the
language you selected.
Audio
To set the Audio Language to
your preferred language,
follow these steps. If your
preferred language is
available on a DVD, your
Audio Language will
automatically be set to the
language you selected.
- If the selected language is not
recorded on the disc, the original prerecorded language is selected.
▼
Subtitle
To set the Subtitle Language
to your preferred language,
follow these steps. If your
preferred language is
available on a DVD, your
Subtitle Language will
automatically be set to the
language you selected.
Downloaded From Disc-Player.com Samsung Manuals
- Select “Automatic” if you want the
subtitle language to be the same as
the language selected as the audio
language.
- Some discs may not contain the
language you select as your initial
language; in that case the disc will
use its original language setting.
ENG-51
D V D O P E R AT I O N S
Setting Up the Audio Options
Audio Options allows you to set up sound for use with your external audio system.
1
With the DVD in Stop mode,
press the MENU button on the
remote control.
2
Press the œƒ buttons to
select DVD, then press the
‹ or ENTER button.
3
Press the œƒ buttons to
select Audio Setup, then
press the ‹ or ENTER
button.
▼
4
Press the œƒ buttons to
select the desired item, then
press the ‹ or ENTER
button.
Downloaded From Disc-Player.com Samsung Manuals
ENG-52
- To make the DVD Setup menu
disappear, press the MENU button.
D V D O P E R AT I O N S
Audio Options
Dolby Digital Out
- PCM: Converts to
PCM(2CH) audio.
Manufactured under license from Dolby
Laboratories. “Dolby” and the double-D
symbol are trademarks of Dolby
Laboratories.
“DTS” and “DTS Digital Out” are trademarks
of Digital Theater Systems, Inc.
- Bitstream: Outputs Dolby
Digital via the digital
output.
Note
There is no analog audio output when you
set DTS to on.
DTS
- Off : Does not output a
digital signal
- On: Outputs DTS Bitstream
Digital via digital output
only. Select DTS when
connecting to a DTS
Decoder.
▼
Dynamic Compression
- Dynamic compression restrains the
dynamic range of the sound, i.e. the
difference between the loud and
quiet passages of a DVD audio track.
This is useful when watching a DVD
late at night.
- On: When the moviesoundtracks are played at
low volume or from smaller
speakers, the system can
apply appropriate compression
to make low-level content more
intelligible and prevent dramatic
passages from getting too loud.
- Off: To select the standard
range.
Note
Even when PCM Down sampling is Off,
some discs will only output down sampled
audio through the digital outputs.
PCM Down Sampling
- On: Select this when the
Amplifier connected to the
player is not 96KHz
compatible. In this case, the
96KHz signals will be
converted down to 48KHZ.
- Off: Select this when the
Amplifier connected to the
player is 96KHz compatible.
In this case, all signals will
be output without any
changes.
Downloaded From Disc-Player.com Samsung Manuals
ENG-53
D V D O P E R AT I O N S
Setting Up the Display Options
Display options enable you to set various video functions of the player.
1
With the unit in Stop mode,
press the MENU button on the
remote control.
2
Press the œƒ buttons to
select DVD, then press the
‹ or ENTER button.
3
Press the œƒ buttons to
select Display Setup, then
press the ‹ or ENTER
button.
▼
4
Press the œƒ buttons to
select the desired item, then
press the ‹ or ENTER
button.
Downloaded From Disc-Player.com Samsung Manuals
ENG-54
- To make the DVD Setup menu
disappear, press the MENU button.
D V D O P E R AT I O N S
Display Options
TV Aspect
Depending on the type of
television you have, you may
want to adjust the aspect
ratio (screen setting).
- 4:3 Letter Box: Select when you want to see the total 16:9
ratio screen the DVD supplies, even though you have a TV
with a 4:3 ratio screen. Black bars will appear at the top
and bottom of the screen.
- 4:3 Pan & Scan: Select this for conventional size TVs when
you want to see the central portion of the 16:9 screen.
(Extreme left and right side of movie picture will be cut off.)
- 16:9 Wide: You can view the full 16:9 picture on your wide
screen TV.
Screen Messages
Use to turn on-screen
messages On or Off.
Progressive Out
- ON : Select when you
want to use the
Component (480p) or
HDMI (480p/720p/1080i)
progressive outputs.
- OFF : Select when you
want to use Video/
Component interlace
scan (480i) output.
Downloaded From Disc-Player.com Samsung Manuals
ENG-55
D V D O P E R AT I O N S
HDMI
This setting is used when the
DVD-VCR is connected by
HDMI to Display devices (TV,
projector, etc).
Resolution Setting
- Auto : Resolution setting automatically
- Manual : Resolution setting Manually.
Resolution
- 480p : 720 x 480
- 720p : 1280 x 720
- 1080i : 1920 x 1080
Format
This feature can be used to fine-tune the HDMI output of this
DVD-VCR unit to your TV or Monitor for the best color
reproduction.
When connected via HDMI, you can change the HDMI output
format. The HDMI output format allows you to set the HDMI
data format and picture status settings depending on the
display system in use.
- RGB-Normal : TV Connection.
Most TVs with HDMI input (Plasma TV, LCD
TV, Projector, Projection TV, CRT TV etc)
support this format.
This mode delivers enhanced contrast and
enables better color reproduction.
- RGB-Expand : Monitor Connection.
This mode is usually used when connected
to a Monitor.
- YCbCr-(4:4:4) : TV Connection.
Most TVs with HDMI input (Plasma TV, LCD
TV, Projector, Projection TV, CRT TV etc)
support this format.
This mode also delivers enhanced contrast
and enables better color reproduction.
- YCbCr-(4:2:2) : TV Connection.
This mode is rarely used and is not
supported by most TVs.
This mode delivers enhanced contrast, but
the picture quality is poorer than YCbCr(4:4:4).
If the HDMI output mode is set incorrectly, the screen
brightness and color may be distorted. If the selected HDMI
format is not supported by your TV, the picture may be
distorted.
Downloaded From Disc-Player.com Samsung Manuals
ENG-56
D V D O P E R AT I O N S
Picture Quality
- Black Level : Adjusts the
brightness of the screen.
(On or Off) This function is
not available in progressive
mode.
- Sharpness : Level 1 ~ Level 5
- Brightness : Level 1 ~ Level 5
- Color Saturation : Level 1 ~ Level 5
●
Consult your TV User’s Manual to find out if your TV supports Progressive Scan. If Progressive Scan is
supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.
●
If the Video Output is set incorrectly, the screen may not display an image.
●
The resolutions available for HDMI output depend on the connected TV or projector. For more details,
see the user’s manual of your TV or projector.
●
When the resolution is changed during playback, it may take a few seconds for a normal image to
appear.
●
For better picture quality, set the HDMI output resolution to 720p or 1080i.
Downloaded From Disc-Player.com Samsung Manuals
ENG-57
D V D O P E R AT I O N S
Setting Up the Parental Control
The Parental Control function works in conjunction with DVDs that have been assigned a rating, which helps
you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc.
Setting Up the Rating Level
1
With the unit in stop mode,
press the MENU button on the
remote control.
2
Press the œƒ buttons to
select DVD, then press the
‹ or ENTER button.
3
Press the œƒ buttons to
select Parental Setup, then
press the ‹ or ENTER
button.
Enter your password.
4
Press the ‹ or ENTER
The Enter Password screen
appears.
Downloaded From Disc-Player.com Samsung Manuals
ENG-58
D V D O P E R AT I O N S
Note
The default password is 0000.
5
Press the ‹ or ENTER
The Enter Password screen
appears.
▼
6
Press the œƒ buttons to
select the Rating Level you
want, then press the ‹ or
ENTER button.
- For example, if you select up to Level
6, discs that contain Level 7 or 8 will
not play.
e.g) Setting up in Level 6.
Changing the Password
1
With the unit in stop mode,
press the MENU button on the
remote control.
2
Press the œƒ buttons to
select DVD, then press the
‹ or ENTER button.
3
Press the œƒ buttons to
select Parental Setup, then
press the ‹ or ENTER
button.
Enter your password.
Downloaded From Disc-Player.com Samsung Manuals
- To make the DVD setup menu
disappear, press the MENU button.
ENG-59
D V D O P E R AT I O N S
4
Press the œƒ buttons to
select Change Password,
then press the ‹ or ENTER
button.
▼
5
Note
If you forgot your password, power on
the unit with no disc.
Press the
/
(Search) buttons
simultaneously on the front panel for 5
seconds. The “Reset OK” message will
appear. Press the POWER button.
Enter your password, then
press the ‹ or ENTER
button.
Enter your new password,
then press the ‹ or
ENTER button.
Downloaded From Disc-Player.com Samsung Manuals
- To make the DVD setup menu
disappear, press the MENU button.
ENG-60
D V D O P E R AT I O N S
DivX(R) Registration
DivX Registration menu has the Registration Code that enables your DivX Certified Player to play DivX(R)
Video On Demand file format.
1
With the unit in Stop mode,
press the MENU button on the
remote control.
2
Press the œƒ buttons to
select DVD, then press the
‹ or ENTER button.
3
Press the œƒ buttons to
select DivX(R) Registration,
then press the ‹ or ENTER
button.
Please use the Registration code to register this player
with the DivX(R) Video On Demand format.
To learn more go to www.divx.com/vod.
4
Press the MENU button to exit.
Downloaded From Disc-Player.com Samsung Manuals
ENG-61
Chapter 5
V C R O P E R AT I O N S
In this chapter, you will learn how to play a video cassette tape, how to use the time counter and memory stop
features, and how to record a program as you are watching TV.
Inserting and Ejecting a Video Cassette
Tape
To Insert a Video Cassette Tape
▼
1
Hold the video cassette tape
window-side up with the arrow
pointing away from you.
- Don’t try to insert a tape upside down
or backwards.
- Use only video tapes labeled “VHS.”
European PAL VHS video tapes and
S-VHS pre-recorded tapes aren’t
compatible with this unit. Choose
brand name, high quality tapes for
best results.
▼
2
Gently push the tape through
the compartment door until you
feel the VCR pull it.
- If the safety tab of your video tape
has been removed, the tape begins
to play automatically. You don’t have
to press PLAY. For more information
on the safety tab, see page 74.
The VCR loads the tape
automatically.
To Eject a Video Cassette Tape
▼
When you’re finished playing a prerecorded video tape, it’s best to rewind it
to the beginning and remove it from the
VCR to protect it from wear and tear.
1
Press the (Stop) button to
stop playing the tape.
DVD-V9700
▼
After ejecting a tape, you should remove
it completely from the compartment and
turn off the VCR.
2
Press the EJECT button on the
front panel to eject the tape.
Downloaded From Disc-Player.com Samsung Manuals
DVD-V9700
ENG-62
V C R O P E R AT I O N S
Playing a Pre-Recorded Video Cassette Tape
Playing the Tape
▼
- For more information on the safety
tab, see page 74.
▼
- The VCR does not play sound while
a video tape is paused.
1
Insert the video cassette tape.
2
If the tape doesn’t begin to play
automatically, press the
(Play/Pause) button.
3
Pausing Play
- See “Using Automatic Tracking” on
the next page.
While a tape is playing, press
the
(Play/Pause) button
when you want to interupt play.
The tape pauses temporarily.
- If you see white lines on the screen,
see “Using Automatic Tracking” on
page 65.
Press the
(Play/Pause)
button to resume playing the
tape.
Note
To view VCR playback, you must connect the Video Out (Yellow) to your TV. The VCR does not output video
through the Component jacks.
Downloaded From Disc-Player.com Samsung Manuals
ENG-63
V C R O P E R AT I O N S
Special VCR Playback Features
While a videotape is playing, you can enjoy a variety of special playback features, including Still, Frame Advance,
Skip, Repeat, and more. Press the Play/Pause button again to resume normal playback.
Frame Advance
In the pause mode, press
F.ADV to advance to the next
frame.
Fps/Rps Review
In Play mode, press
/
(Forward) or
/
(Rewind)
to review at two speeds:
- Picture Search: Press and
release
or
(SKIP)
buttons to advance the tape
forward or backward at 5
times normal speed.
- Jet Search: Press and hold
down the /
(SEARCH)
buttons, then release it to play
back at the normal speed.
SKIP
In Play mode, press the SKIP
button to move ahead exactly
30 seconds. Press the SKIP
button repeatedly up to 4 times
to move ahead 2 minutes.
Repeat
- In Play mode, press the
REPEAT button to review the
last 5 seconds of tape (SP
mode).
- In Play mode, press the
REPEAT button to review the
last 15 seconds of tape (SLP
mode).
Downloaded From Disc-Player.com Samsung Manuals
ENG-64
V C R O P E R AT I O N S
Using Automatic Tracking
The Tracking adjustment removes the white lines that sometimes appear during playback because of slight
differences in recording decks. The TRK button will automatically align the recorded tracks with the playback
heads to solve this problem. You may also set tracking manually.
1
Insert and play a video
cassette tape.
As soon as the tape begins
to play, the VCR begins
automatic tracking.
Tracking
2
If automatic tracking doesn’t
remove the streaks from the
picture, press and hold the
TRK/TV CH
or TRK/TV
CH
button until the
streaks disappear.
Downloaded From Disc-Player.com Samsung Manuals
ENG-65
V C R O P E R AT I O N S
Selecting the Cassette Type
If you wish to use the tape counter to display the time remaining on a cassette, you must indicate the
type of cassette inserted.
1
Press the MENU button on the
remote control.
2
Press the œƒ buttons to
select VCR, then press the
‹ or ENTER button.
n
Note
This information is usually printed on the
tape box. The menu cycles through: T-120,
T-160 or T-180.
Once the type of cassette is set, the VCR
can display the amount of time remaining on
the tape when you press the INFO. button.
3
Press the œƒ buttons to
select Tape Length, then
press the ‹ or ENTER
button to select the correct
cassette length.
4
Press the MENU button to exit.
Downloaded From Disc-Player.com Samsung Manuals
ENG-66
V C R O P E R AT I O N S
Setting the Auto Play
If you want your videotapes to play automatically when you insert them, turn on Auto Play.
Note
Only tapes that are missing the Record
Safety Tab will play automatically when
inserted (See page 74).
1
Press the MENU button on the
remote control.
2
Press the œƒ buttons to
select VCR, then press the
‹ or ENTER button.
n
▼
3
Press the œƒ buttons to
select Auto Play, then press
the ‹ or ENTER button to
select On or Off.
- Off: Auto play is disabled.
4
Press the MENU button to exit.
Downloaded From Disc-Player.com Samsung Manuals
- On: The VCR will automatically begin
playing a video tape when it is
inserted, as long as the safety
tab of the cassette has been
removed.
ENG-67
V C R O P E R AT I O N S
Setting the Auto Repeat
If you want your videotapes to play repeatedly, turn on Auto Repeat.
1
Press the MENU button on the
remote control.
2
Press the œƒ buttons to
select VCR, then press the
‹ or ENTER button.
n
▼
3
Press the œƒ buttons to
select Auto Repeat, then
press the ‹ or ENTER
button to select On or Off.
- Off: Auto Repeat is disabled.
4
Press the MENU button to exit.
Downloaded From Disc-Player.com Samsung Manuals
- On: The VCR will play a tape
repeatedly [unless a tape control
is activated (stop, fast forward or
rewind)].
ENG-68
V C R O P E R AT I O N S
Using the Tape Counter
The tape counter:
- Indicates the elapsed time in the play and record modes (hours, minutes and seconds).
- Is reset when a cassette is inserted in the DVD-VCR.
- Allows you to easily find the beginning of a sequence.
- If the remaining time is to be calculated correctly, you must indicate the type of cassette being used.
1
Insert a cassette in your DVDVCR. To set the tape counter
to zero at the beginning of a
sequence:
- Press the INFO. button twice
to display the counter
- Press the CLEAR button
when you want to set the
tape counter to zero.
2
When you are ready,
- Start playback or recording.
- Press the (Stop) button.
- To fast-forward or rewind to
the sequence at which the
counter was set to zero, press
the the /
(Forward) or
/
(Rewind) buttons on
the remote control.
- Some DVD-VCR information, such as the counter, can be
displayed on the television screen.
Press the INFO. button:
- Once to display the current function, recording speed and
counter.
- Twice to display the counter only.
- Three times to display the time remaining on the cassette.
- Four times to clear the display.
Downloaded From Disc-Player.com Samsung Manuals
ENG-69
V C R O P E R AT I O N S
Using the Assemble Edit Function
This function allows you to start a new recording at a specific position on the cassette while maintaining a very
smooth scene change.
1
Insert the cassette to be edited
in your DVD-VCR.
2
Press the
(Play/Pause)
button to start playback.
3
When you reach the position
from which you wish to start
the new recording, press the
(Play/Pause) button.
4
Press the F.ADV button as
often as necessary to advance
frame by frame, until the exact
recording position is located.
5
While the DVD-VCR is in
pause mode, press the REC
button. The pause mode is
displayed on the screen.
Downloaded From Disc-Player.com Samsung Manuals
ENG-70
V C R O P E R AT I O N S
6
Select the source from which
you wish to record by pressing:
button for
- The CH or
television channel.
- The INPUT SEL. button for
the LINE1 or LINE2 input
source.
7
Press the REC button to start
recording. When you have
finished recording, press the
(Stop) button.
Selecting the Audio Output Mode
You can select the mode in which the sound is reproduced on the loudspeakers and AV outputs.
The following options are available.
Press the AUDIO button on the
remote control until the
required option is displayed.
Audio output Mode
- Left : Used to listen to the sound on the left Hi-Fi channel.
- Right: Used to listen to the sound on the right Hi-Fi channel.
- Mono: Used to listen to the sound on the normal mono channel.
- Hi-Fi : Used to listen to Hi-Fi stereo sound on the left and
right channels. When playing back tapes recorded in
Hi-Fi, the sound switches to Hi-Fi after five seconds of
Mono.
Downloaded From Disc-Player.com Samsung Manuals
ENG-71
V C R O P E R AT I O N S
Searching for a Specific Sequence
Each time you record a cassette on this DVD-VCR, an “index” is automatically marked on the tape when
recording starts.
The Search function allows you to fast-forward or rewind to a specific index and start playback from that point.
Depending on the direction selected, the indexes are numbered as follows:
➔
Prev
Seq.
etc.
2
Next
Seq.
Seq. being
played
1
1
etc.
2
This DVD-VCR uses a standard indexing system (VISS). As a result, it will recognize any indexes marked by
other VCRs using the same system and vice versa.
1
Press the MENU button on the
remote control.
2
Press the œƒ buttons to
select Function, then press
the ‹ or ENTER button.
3
Press the œƒ buttons to
select VCR Function, then
press the ‹ or ENTER
button.
VCR Function can be
displayed simply by pressing
the SEARCH button.
4
Press the œƒ buttons to
select the desired item, then
press the ‹ or ENTER
button.
Downloaded From Disc-Player.com Samsung Manuals
ENG-72
V C R O P E R AT I O N S
Variable Search System
Go To [0:00:00] Stop
Use this feature when you
want to search for the 0:00:00
counter position on a
cassette.
Press the CLEAR button at
the point on the tape where
you want to set the counter to [0:00:00].
The VCR will rewind or fast forward, searching for the
0:00:00 counter position, and then automatically stop at that
position.
End Search
Use this feature when you
want to search for a blank
position to record a program
on a cassette.
The VCR will fast forward,
searching for a blank position,
and then automatically stop at that position.
If the VCR reaches the end of the tape during end search,
the tape will be ejected.
Scan and Play
Use scan and play when you
don’t know exactly where a
program is located on a
cassette tape.
- Forward Intro Scan
Select “Forward Intro
Scan”, then press the ENTER button.
- Reverse Intro Scan
Select “Reverse Intro Scan”, then press the ENTER button.
Downloaded From Disc-Player.com Samsung Manuals
ENG-73
V C R O P E R AT I O N S
Basic Recording
You can record a TV show in progress by inserting a blank tape and pressing the REC button.
You can even add time in 30-minute increments up to 4 hours by pressing the REC button repeatedly;
see page 76.
Note
Be sure your videotape has a Record Safety Tab. If the tab is missing, you can cover the opening with a small
piece of tape. Warning: Do not cover this opening unless you are sure you want to record over the tape.
Before You Begin...
- Power on the DVD-VCR
- Power on the TV
Protecting a Recorded Cassette
Video cassettes have a safety tab to prevent accidental erasure. When this tab has been removed, you cannot
record on the tape.
If you wish to protect a
cassette, break off the tab
using a small screwdriver.
To re-record over a protected
cassette (safety tab broken),
cover the hole with adhesive
tape.
Recording
1
Insert a blank VHS tape into
the VCR deck.
Make sure the tape is long
enough to record the entire
program.
Press the SPEED button to set
the record speed.
(See page 77)
2
Press the INPUT SEL. or
button to select Line 1 or 2
if recording from an external device connected to the front or
rear jacks, respectively.
Downloaded From Disc-Player.com Samsung Manuals
ENG-74
V C R O P E R AT I O N S
Note
Recording from the DVD to the VCR is not
possible.
3
Press the REC button on the
remote control or front panel.
For options while recording is in
progress, see “Special Recording
Features” on this page.
4
Pause/Resume Recording
Press the
(Play/Pause)
button.
Press the REC button again to
resume.
5
Stop Recording
Press the (Stop) button.
Special Recording Features
While a recording is in progress, you can watch a DVD, or add recording time in 30-minute increments.
To Watch a DVD while Recording
Insert a DVD in the DVD tray and press the
(Play/Pause). The output will automatically change to the
DVD.
To Add Recording Time
See One-Touch Recording (OTR) on page 76.
Downloaded From Disc-Player.com Samsung Manuals
ENG-75
V C R O P E R AT I O N S
Using One-Touch Recording
One-Touch Recording (OTR) allows you to add recording time in 30-minute increments up to 4 hours at the
touch of a button.
1
Insert a blank VHS tape into
the VCR deck.
2
Use the CH
or
buttons to select the desired TV
channel, or press the INPUT SEL. button to select Line 1 or
2 if recording from an external device connected to the front
or rear jacks, respectively.
3
Press the REC button on the
remote control or front panel.
4
While in Record mode, press
the REC button again to
activate One-Touch Recording
(OTR).
Record length 0:30 appears
on the On-screen display and
the DVD-VCR will record for
exactly 30 minutes.
Downloaded From Disc-Player.com Samsung Manuals
ENG-76
V C R O P E R AT I O N S
5
Record
length
0:30
LINE1
Add Recording Time
Continue pressing REC
button to add recording time
in 30 minute increments up to
4 hours.
The DVD-VCR stops
recording automatically when
the time has elapsed. The
DVD-VCR will automatically be
turned off when the OTR
finished.
SP
Selecting the Recording Speed
You can slow down the recording speed from SP to SLP in order to fit six hours of programming on a T-120
tape.
Note
The selected Record Speed will appear on
the front panel display and on-screen
display.
Press the SPEED button on the
remote control to select the
Record Speed.
- SP: Standard Play, for best
quality.
- SLP: Super Long Play, for
maximum recording
time (3 times SP).
Maximum Recording Time - SP vs. SLP
Tape Length
SP (Standard Play) SLP (Super Long Play)
T-120
2 hrs
6 hrs
T-160
2hrs 40 mins
8 hrs
T-180
3 hrs
9 hrs
Downloaded From Disc-Player.com Samsung Manuals
ENG-77
V C R O P E R AT I O N S
Making a Timer Recording
Insert a blank videotape into the VCR deck. Be sure to leave the Record Safety Tab intact.
With the Timer Recording function, you can program up to 7 events at a time to record up to a month in
advance.
To Begin Setting the Timer Recording,
- Power On your DVD-VCR.
- Power On your TV.
1
Press the MENU button on the
remote control.
2
Press the œƒ buttons to
select PROG, then press the
‹ or ENTER button.
The Timer Program Screen
can be displayed simply by
pressing the TIMER button.
3
Select Line input 1 or 2
Press the ‹ button, then
press the œƒ buttons to
set the channel.
Note
You can select an external device
connected to L1(Line 1) or L2(Line 2) by
pressing the INPUT SEL. button.
Press the ‹ button to move
to the next setting.
4
Set Time/Date/Speed
Repeat Step 3 above to set
start time, end time, date and
record speed.
Date can be set for one time,
daily or weekly recording.
Downloaded From Disc-Player.com Samsung Manuals
ENG-78
V C R O P E R AT I O N S
Selecting Auto Speed
If the length of the videotape is not long enough for a timer
recording in the SP mode, set the recording tape speed to
“Auto”. Recording will start in the SP mode. If the length is not
long enough, the tape speed will automatically change from SP
mode to SLP mode.
Daily/Weekly Date Programming
Weekly [Sun~Sat]: Use this to record TV programs on the same
Line In at the same time every week. Daily [Mon, Tue, Wed,
Thu, Fri]: Use this to record TV programs on the same channel
at the same time every day Monday through Friday.
5
Save Timer Recording
Press the RETURN button to
finish setting the timer
recording.
Stop the DVD-VCR or turn the
power off. Then the DVD-VCR
will automatically turn on and
begin recording at the time you
set.
To stop the timer recording,
press the POWER button or
press the (Stop) button
twice.
Downloaded From Disc-Player.com Samsung Manuals
ENG-79
C R O P E R AT I O N S
CVh
apter 6
REFERENCE
Using the TV Buttons on the Remote Control
Your DVD-VCR remote control will work with Samsung televisions and compatible brands.
To determine whether your television is compatible, follow the instructions below.
1 Switch your television on.
2 Point the remote control towards the television.
3 Hold down the TV button and enter the two-figure code corresponding to the brand of your television, by
pressing the appropriate numeric buttons.
TV Codes
BRAND
SAMSUNG
DAEWOO
EMERSON
HITACHI
LG
LOEWE
MAGNAVOX
NEWSAN
NOBLEX
PANASONIC
RCA
SANYO
SHARP
SONY
TELEFUNKEN
TOSHIBA
ZENITH
CODE
01, 14, 15, 23
19
21
10
06, 08, 18
28
04
27
25
12, 24
07, 29
05, 20
02, 16, 22
03
26
09
17
Note
- If your television is compatible with the remote control, it will switch off. It is now programmed to operate
with the remote control.
- If several codes are indicated for your television brand, try each one in turn until you find one that works.
You can then control the television using the following buttons.
Button
POWER
INPUT SEL.
TV VOL + or –
TV CH ( or )
TV MUTE
Function
Used to switch the television on and off.
Used to select an external source.
Used to adjust the volume of the television.
Used to select the required channel.
Used to toggle the sound on and off.
The various functions will not necessarily work on all televisions. If you encounter problems, operate the
television directly.
Downloaded From Disc-Player.com Samsung Manuals
ENG-80
MEMO
Troubleshooting
Before contacting a Samsung authorized service center, perform the following simple checks.
If you are unable to solve the problem after reading the above instructions, note:
- The model and serial number on the rear of your DVD-VCR
- The warranty information
- A clear description of the problem
Then contact your nearest SAMSUNG service center.
Identifying DVD Problems
Problem
No operations can
be performed with
the remote control.
Action
• Check the batteries in the remote control.
They may need replacing.
• Operate the remote control at a distance of no more than 20 feet.
• Remove batteries and hold down one or more buttons for several
minutes to drain the microprocessor inside the remote control to
reset it. Reinstall batteries and try to operate the remote control
again.
Disc does not play.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the DVD.
5.1 channel sound
is not being
reproduced.
• 5.1 channel sound is reproduced only when the following
conditions are met.:
1) The DVD-VCR is connected with the proper Amplifier
2) The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the “5.1 ch” mark on
the outside.
• Check if your audio system is connected and working properly.
• In a DVD Setup Menu, is the Audio Output set to Bitstream?
The
icon
appears on
screen.
• The features or action cannot be completed at this time because:
1. The DVD’s software restricts it.
2. The DVD’s software doesn’t support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is
out of range.
Page
P5
P9
P20
-
Disc Menu doesn’t
appear.
• Check if the disc has a Menu.
-
Play mode differs
from the Setup
Menu selection.
• Some of the functions selected in the Setup Menu may not work
properly if the disc is not encoded with the corresponding
function.
-
The screen ratio
cannot be changed.
• The Screen Ratio is fixed on your DVDs.
No audio.
• Make sure you have selected the correct Digital Output in the
Audio Options Menu.
Downloaded From Disc-Player.com Samsung Manuals
ENG-81
P35-36
P52~53
V C R O P E R AT I O N S
Problem
The screen is
blocked
Forgot password
Action
• Press the
/
button for more than 5 seconds with no disc in
the unit. All settings will revert to the factory settings.
• From a cold start with no disc in unit, press the
/
button
simultaneously on the front panel for 5 seconds. All settings
including the password will revert to the factory settings. Don't
use this unless absolutely necessary.
If you experience
other problems.
• Go to the contents and find the section of the instruction book
that contains the explanations regarding the current problem, and
follow the procedure once again.
• If the problem still cannot be solved, please contact your nearest
authorized service center.
The picture is
noisy or distorted
• Make sure that the disc is not dirty or scratched.
• Clean the disc.
Page
-
P58
Identifying VCR Problems
Problem
Action
No power
• Check that the power plug is connected to a wall outlet.
You cannot insert
a video cassette
• A video cassette can only be inserted with the window
The television
program was not
recorded
• Check the DVD-VCR antenna/cable connections.
• Is the DVD-VCR tuner properly set?
• Check if the safety tab is intact on the cassette.
Timer recording
was unsuccessful
• Re-check the recording start/stop time settings.
• If there was a power failure or interruption during timer
No playback picture
or the picture is
• Check to see if you are using a prerecorded tape.
side up and the safety tab facing you.
Page
P74
-
P78-79
recording, the recording will have been cancelled.
P63
distorted
You cannot see
normal broadcasts
• Check the tuner or external setting. It should be on tuner.
• Check the TV or VCR antenna connections.
Noise bars or
streaks on playback
• Press the TRK buttons to minimize this effect.
When the
button
is pressed during
playback, the still
picture has severe
“noise bar” streaks
• A still picture may have “noise bars”, depending on the
Video Head
Cleaning
• If poor pictures appear on a variety of cassettes, the video
condition of the tape. Press the TRK buttons during slow
motion to minimize this effect.
heads may need cleaning. This is not a common problem
and unless it appears, the heads should not be cleaned.
When cleaning the video heads, read all instructions
provided with the head cleaning cassette. Incorrect head
cleaning can permanently damage the video heads.
Downloaded From Disc-Player.com Samsung Manuals
ENG-82
-
P65
-
-
V C R O P E R AT I O N S
Technical Specifications
AUDIO
Inputs
2 Stereo audio inputs, RCA Connector, -8dbm, 47KΩ,
front and rear
VIDEO
2 Composite video inputs, RCA Connector, 75Ω, 1Vp-p
AUDIO
1 Stereo audio outputs, RCA Connector, -8dbm, 1.5KΩ
AUDIO (DVD only)
2 Digital audio output (1 coaxial, 1 optical)
1 pair Stereo audio outputs
Outputs
VIDEO
1 Composite video output, RCA Connector, 75Ω, 1Vp-p
VIDEO (DVD only)
1 Component video output, 75Ω, Y=1.0Vp-p, Pb=0.7Vp-p,
Pr=0.7Vp-p
HDMI
1 HDMI output
VIDEO SYSTEM
1/2-inch VHS system, 4 rotary head helical scanning;
FM azimuth luminance;chrominance: converted sub system
phase shift
VCR
AUDIO TRACK
Normal: 1 track; Hi-Fi: 2 track
PLAY/RECORD TIME
T-180 tape: SP 3 hours, SLP 9 hours
FF/REW TIME
T-120 tape: <2 minutes
HEADS
Video:
DA 4 rotary
Audio:
2 rotary heads (Hi-Fi); 1 stationary head (Linear)
Control:
1 stationary head
Erase:
1 full track, 1 audio track
WOW & FLUTTER
Less than 0.005% (Hi-Fi)
FREQ. RESPONSE
20-20,000 Hz (Hi-Fi)
DISC COMPATIBILITY
CD, CD-R, CD-RW
DVD-Video, CD-Digital Audio (5” and 3.5”)
DVD
FREQ. RESPONSE
96/48 kHz Sampling: 4 Hz-22kHz
S/N RATIO
110 dB
DYNAMIC RANGE
96 dB
THD
0.003 %
POWER REQUIREMENT
SYSTEM
120V AC, 60 Hz, 25 watts
ENVIRONMENT
41-104˚F (5-40˚C); 10%-75% humidity
WEIGHT
13.8 lbs.
- Samsung Electronics Co., Ltd reserves the right to change the specifications with out notice.
- Weight and dimensions are approximate.
Downloaded From Disc-Player.com Samsung Manuals
ENG-83
MEMO
Downloaded From Disc-Player.com Samsung Manuals
ENG-84
MEMO
Downloaded From Disc-Player.com Samsung Manuals
ENG-85
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care centre.
Region
North America
Latin America
Europe
CIS
Country
CANADA
MEXICO
U.S.A
ARGENTINE
BRAZIL
CHILE
COSTA RICA
ECUADOR
EL SALVADOR
GUATEMALA
JAMAICA
PANAMA
PUERTO RICO
REP. DOMINICA
TRINIDAD & TOBAGO
VENEZUELA
BELGIUM
CZECH REPUBLIC
DENMARK
FINLAND
FRANCE
GERMANY
HUNGARY
ITALIA
LUXEMBURG
NETHERLANDS
NORWAY
POLAND
PORTUGAL
SLOVAKIA
SPAIN
SWEDEN
U.K
REP. Ireland
RUSSIA
UKRAINE
AUSTRALIA
CHINA
HONG KONG
INDIA
Asia Pacific
INDONESIA
JAPAN
MALAYSIA
PHILIPPINES
SINGAPORE
THAILAND
Middle East & Africa
TAIWAN
VIETNAM
SOUTH AFRICA
U.A.E
Downloaded From Disc-Player.com Samsung Manuals
Customer Care Center ☎
1-800-SAMSUNG (7267864)
01-800-SAMSUNG (7267864)
1-800-SAMSUNG (7267864)
0800-333-3733
0800-124-421
800-726-7864(SAMSUNG)
0-800-507-7267
1-800-10-7267
800-6225
1-800-299-0013
1-800-234-7267
800-7267
1-800-682-3180
1-800-751-2676
1-800-7267-864
1-800-100-5303
02 201 2418
844 000 844
38 322 887
09 693 79 554
08 25 08 65 65 (€ 0,15/Min)
01805 - 121213 (€ 0,12/Min)
06 40 985 985
199 153 153
02 261 03 710
0900 20 200 88 (€ 0.10/Min)
231 627 22
0 801 801 881
80 8 200 128
0850 123 989
902 10 11 30
08 585 367 87
0870 SAMSUNG (7267864)
0818 717 100
8-800-200-0400
8-800-502-0000
1300 362 603
800-810-5858, 010- 6475 1880
2862 6001
3030 8282
1600 1100 11
0800-112-8888
0120-327-527
1800-88-9999
1800-10-SAMSUNG (7267864)
1800-SAMSUNG (7267864)
1800-29-3232
02-689-3232
0800-329-999
1 800 588 889
0860 7267864 (SAMSUNG)
800SAMSUNG (7267864)
ENG-86
Web Site
www.samsung.com/ca
www.samsung.com/mx
www.samsung.com
www.samsung.com/ar
www.samsung.com/br
www.samsung.com/cl
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/latin
www.samsung.com/be
www.samsung.com/cz
www.samsung.com/dk
www.samsung.com/fi
www.samsung.com/fr
www.samsung.de
www.samsung.com/hu
www.samsung.com/it
www.samsung.lu
www.samsung.com/nl
www.samsung.com/no
www.samsung.com/pl
www.samsung.com/pt
www.samsung.com/sk
www.samsung.com/es
www.samsung.com/se
www.samsung.com/uk
www.samsung.com/uk
www.samsung.ru
www.samsung.com/ur
www.samsung.com/au
www.samsung.com.cn
www.samsung.com/hk
www.samsung.com/in
www.samsung.com/id
www.samsung.com/jp
www.samsung.com/my
www.samsung.com/ph
www.samsung.com/sg
www.samsung.com/th
www.samsung.com/tw
www.samsung.com/vn
www.samsung.com/za
www.samsung.com/mea
Warranty
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS AMERICA, INC.
(SAMSUNG) and delivered new, in the original carton to the original consumer purchaser, is warranted by
SAMSUNG against manufacturing defects in materials and workmanship for the following limited warranty period:
One (1) Year Parts / Ninety days (90) Labor
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in
the United States, and does not include transportation, installation, removal or reinstallation.
Warranty repairs must be performed by SAMSUNG’S authorized service center. To receive warranty service, the
original dated bill of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG’S
authorized service center. Transportation to and from the service center is the responsibility of the purchaser.
SAMSUNG will repair or replace this product, at our option and at no charge with new or reconditioned parts, if
found to be defective during the limited warranty period specified above. The product must be returned during the
warranty period with transportation charges prepaid to SAMSUNG’s designated service center. Prior to returning
any product for warranty service, the purchaser must contact SAMSUNG for problem determination and service
procedures. SAMSUNG does not warrant uninterrupted or error-free operation of the product.
All replaced parts and products become the property of SAMSUNG and must be returned to SAMSUNG.
Replacement parts and products assume the remaining original warranty, or ninety (90) days, whichever is longer.
This limited warranty covers manufacturing defects in materials and workmanship encountered in normal,
noncommercial use of this product and shall not apply to the following, including, but not limited to: damage which
occurs in shipment; applications and uses for which this product was not intended; failures or problems which are
caused by products or equipment not supplied by SAMSUNG; accidents, misuse, abuse, neglect, misapplication,
fire, water, lightning or other acts of nature; incorrect electrical line voltage, fluctuations or surges; damage caused
by improper or faulty installation; improper connection with any peripheral; product alteration or modification;
improper or unauthorized repair; cosmetic damage or exterior finish; product with altered serial numbers; failure to
follow operating instructions, customer adjustments, maintenance and environmental instructions that are covered
and prescribed in the instruction book; use of non-SAMSUNG or unauthorized parts, supplies, accessories or
equipment which damage this product or result in service problems; failures or problems due to incompatibility
with other equipment.
Downloaded From Disc-Player.com Samsung Manuals
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care center.
☎ 1-800-SAMSUNG (7267864) / www.samsung.com
Samsung Electronics America, Inc.
105 Challenger Road
Ridgefield Park, NJ 07660-0511
1-800-SAMSUNG (7267864)
www.samsung.com
US
Downloaded From Disc-Player.com Samsung Manuals
AK68-01304D