Compaq 353803-B22 - StorageWorks Modular Smart Array 1000 SAN Starter QuickSpecs

QuickSpecs
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
Overview
HP StorageWorks
Modular Smart Array
1000 for Microsoft®,
Linux, NetWare and
(limited) HP-UX and SCO
environments
The HP StorageWorks Modular Smart Array 1000 (MSA1000) is a 2 Gb Fibre Channel storage system
designed for the entry-level to mid-range Storage Area Network (SAN). Designed to reduce the
complexity, expense and risk of SAN deployment, the MSA1000 is a scaleable, high performance
storage system built with investment protection in mind. The modular design of the MSA1000 allows the
user to easily add storage capacity as needed. With the addition of two HP StorageWorks MSA30 disk
enclosures with space for a total of forty-two enterprise-class drives, maximum storage capacity is 12TB.
All necessary configuration & management programs are included and there are no unexpected charges
for extra licenses as your capacity needs grow or as you attach more servers.
The MSA1000 is a member of the HP StorageWorks Modular Smart Array family, delivering industryleading technology to meet today's demanding and growing storage needs. These storage solutions offer
the best price performance features for direct attach environments, small clusters, and entry-level and
mid-range SAN environments. Each solution is designed to maximize transfer rates and reduce
management costs, while driving rapid return on investment.
Heterogeneous support is standard for Microsoft Windows® Server 2003 (32-bit and 64-bit) Windows
2000, Windows NT®, NetWare and Linux (32-bit and 64-bit) operating systems. In addition this
firmware provides separate support for Alpha servers in a Tru64 UNIX® or OpenVMS environment.
Information about the support for these two operating systems is included in a separate QuickSpec for
the MSA1000 attached to Alpha-based servers. HP also expanded the MSA1000's operating system
coverage with the addition of basic HP-UX and SCO support in limited, homogeneous configurations.
Key Features
The MSA1000 offers the following key features:
High performance controller(s) built on DAS to SAN {DtS} architecture for maximum investment protection
4U rackmount design combining both the controller and disk shelf
2 Gb Fibre Channel host connections
Optional embedded 8-port 2 Gb Fibre Channel Fabric Switch or 3-port 2 Gb Fibre Channel hub
Support for enterprise class HP Ultra2, Ultra3, and Ultra320 Universal 1" SCSI Drives
Scaleable from 1 to 42 drives via HP StorageWorks drive enclosures for up to 12TB of storage
Compatible with ISV backup and restore software from Hewlett Packard, VERITAS and others
Support for HP-UX, the industry's No. 1 rated UNIX® operating system, in a homogeneous environment
What's New
New HP StorageWorks MSA1000 SAN Starter High Availability Kit, a companion piece to the MSA SAN Starter Kit, providing
the necessary hardware pieces to insure redundancy. It replaces the two older HA Kits that included StorageWorks Secure Path
software. The new kit allows the customer to pick their own path-failover solution which can be MPIO for Windows, QLogic
Failover for Linux, or HP Secure Path. This option kit gives you a second array controller, a second switch, two more of the
FCA2214 HBAs and cabling. It's an easy and cost efficient option that brings the user the redundancy protection many users
desire.
DA - 11033
Worldwide — Version 23 — August 15, 2005
Page 1
QuickSpecs
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
Overview
Recent Enhancements
The MSA1000 SAN Starter Kit provides an easy and inexpensive way to build a Storage Area Network. It includes the
MSA1000 itself along with the unique MSA SAN Switch 2/8 embedded option, two of the FCA2214 Host Bus Adapters for
Windows, NetWare or Linux servers, SFPs and cabling. As always, the MSA1000 comes complete with configuration and
management tools in addition to HP's Selective Storage Presentation software, all at no extra charge.
An aggressively priced HP StorageWorks MSA1000 Small Business SAN Kit (SMB only) which includes a low cost switch and
HBAs designed exclusively for opportunities not requiring large connectivity. Refer to the HP StorageWorks Modular Smart
Array 1000 Specific for Small Business SAN Kit QuickSpecs for details.
DA - 11033
Worldwide — Version 23 — August 15, 2005
Page 2
QuickSpecs
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
MSA1000 Highlights
High Levels of
Performance, Scalability,
and Functionality
DtS Architecture
(Direct Attach to SAN)
Data Migration
Performance – The MSA1000 and its components have been designed using the latest industry
standard 2 Gb interconnects and Fibre Channel technology. Performance tests indicate a data
transmission rate of up to 30,000 IOPS and bandwidth of up to 200 MB per second. (Single
MSA1000 Controller)
Modular Chassis – The modular design of the MSA1000 cabinet supports up to fourteen 1"
Universal hard drives, redundant controllers, 2 Gb embedded fabric switches or hubs, fans and
power supplies in a 4U rackmount cabinet.
Scalability – The MSA1000 is easily expanded. The MSA1000 cabinet scales to 4 TB using
fourteen 300 GB, 1" HP Universal hard drives. By simply adding additional StorageWorks disk
Enclosures (two enclosures max), the MSA1000 scales to 12 TB using forty-two 300 GB 1" HP
Universal hard drives - all within 10U of rack space.
MSA SAN Switch 2/8 – The optional MSA SAN Switch 2/8, which can be installed within the
MSA1000 cabinet, offers 2 Gb full fabric performance at an attractive price. A second MSA SAN
Switch 2/8 can be installed for redundancy. There are seven pluggable ports available (four SFPs
are included). The eighth port is directed internally to the controller.
MSA Hub 2/3 – The optional MSA Hub 2/3, which can be installed within the MSA 1000, offers 2
Gb performance. With two ports accessible by the user, the MSA Hub 2/3 is the ideal interconnect
for low-cost 2-node clustering or simply attaching two servers. A second MSA Hub 2/3 can be
installed for redundancy. This hub ships with two SFPs included. Not available for use in Alpha
environments.
Hot Plug Expansion and Replacement Support – The MSA1000 supports hot plug expansion and
replacement of hard drives, redundant controllers, fabric switches or hubs for simple, fast
installation and maintenance. Fans and power supplies are also hot plug replaceable.
RAID 6 with HP's Advanced Data Guarding technology (RAID ADG) – This is the highest level of
fault tolerance. It allocates two sets of parity data across drives and allows simultaneous write
operations. This level of fault tolerance can withstand two simultaneous drive failures without
downtime or data loss.
DtS (Direct Attach to SAN) architecture is an exclusive MSA1000 feature that provides a quick and easy
way to migrate stored data, disks and enclosures protected by most Smart Array controllers to a
MSA1000 storage system.
Data that is currently stored on 1" Universal disk drives using recent HP Smart Array controllers, as well
as data on a RA4100 or an MSA500 can easily be migrated to the MSA1000. Simply remove the drives
from the older systems and insert them into the MSA1000. All configuration information and data will be
preserved allowing migration to be completed in minutes, not hours or days. Refer to the MSA1000 DtS
Data Migration White Paper for a list of compatible Smart Array controllers and further details.
Broad Server, Operating The modular and scalable design of the MSA1000 provides an extremely flexible platform. You can buy
System and FC
what you need today and purchase additional capacity and performance as your data storage needs
Interconnect support
grow, instead of making a large up-front investment. Additional drives, controllers, cache, fabric switches
and storage enclosures can easily be added, as your storage needs change.
Fabric Support for 1 Gb and 2 Gb Infrastructure – The MSA1000 supports both 1 Gb and 2 Gb
Fibre Channel fabrics to ensure that your investment in 1 Gb infrastructure is protected.
Optional embedded interconnects – Both the MSA SAN Switch 2/8 and the MSA Hub 2/3 require
no rack space as they are installed in the MSA1000's chassis. This not only saves valuable rack
space (up to 2U saved) but also eliminates some of the cabling needed with external interconnects.
The MSA SAN Switch 2/8 ships with 4 SFPs installed and the MSA Hub 2/3 ships with 2 SFPs.
Universal Hard Drive – Since the MSA1000 supports HP Universal 1" Ultra2, Ultra3 and Ultra320
drives, your investment in SCSI technology is protected and cost is minimized as you add new
drives. Sharing of a common universal drive form factor between your servers and storage can
significantly reduce needs for hardware and spare inventory, and offer overall reduction in storage
DA - 11033
Worldwide — Version 23 — August 15, 2005
Page 3
QuickSpecs
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
MSA1000 Highlights
management and business costs.
Pre-Failure Warranty – Drives installed in an MSA1000 and monitored under Insight Manager are
supported by a Pre-Failure (replacement) Warranty.
NOTE: Pre-Failure Warranty allows for the replacement of designated drives in an MSA1000
before they actually fail when using Insight Manger on ProLiant servers.
NOTE: Some operating systems may not support all of these features.
Multi-platform Intel®
Intel and AMD® Opteron based Server Support – The MSA1000 offers Multiplatform Intel-based (x86) and AMD server support to allow a broad range of servers to take
advantage of the MSA1000's scalability, flexibility and connectivity, and supports ACU and Insight
Manager. When used with a ProLiant server, the MSA1000 also provides unparalleled integration
with the MSA1000 Support CD and Pre-Failure Warranty support.
Alpha server support – The MSA1000 also supports Alpha-based servers operating in a Tru64
UNIX or OpenVMS environment. Refer to the HP StorageWorks Modular Smart Array 1000
Specific for Tru64 UNIX or OpenVMS Only QuickSpecs for details.
HP-UX PA-Risc and Itanium-based server support – In April of 2004 HP announced basic
MSA1000 HP-UX support in limited, homogeneous configurations. Coverage extends to HP-UX
11.11, and 11.23 and a wide-ranging list of Integrity and HP9000 servers.
SCO UnixWare support - SCO OpenServer 6.0.0, SCO UnixWare 7.1.3 with Maintenance Pack
3 and 7.1.4 are supported in limited, single controller 2-node homogeneous configurations. The
ProLiant servers supported with MSA1000 for SCO UnixWare & OpenServer are ML350 G4,
ML570 G2, DL380 G4ML 370G3, ML 530G2, ML 570G2, DL 380G3, DL 760G2. Future
versions of the listed hardware will be supported. Connections are made with the single or dual
channel StorageWorks FCA2214 HBA (driver: qlc2300 v8.0.2 FW: 1.33) and supports the FC
I/O module, the MSA SAN Switch 2/8 or the MSA Hub 2/3.
Integrated Configuration and Management Tools – The MSA1000 utilizes a standard, integrated
set of management and utility software. These tools consistently lower the cost of ownership by
reducing training and technical expertise necessary to install and maintain the MSA1000.
The MSA1000 comes with/supports the following configuration and management tools depending on
what operating system:
Configuration
Array Configuration Utility (ACU). ACU is a browser-based disk
(solution chosen as
configuration utility that lets you view, set up, and configure the array
appropriate for operating
controllers and storage systems.
system)
Command Line Interface (CLI)
Management/Health
Insight Manager (IM)
(solution chosen as
EMS Used in conjunction with HP-UX servers
appropriate for operating
Array Diagnostics Utility (ADU) This utility collects information about
system)
the array controllers in the system and generates a list of potential
problems it has identified. It produces a report that can be saved to a
diskette and analyzed by support technicians to aid in problem
resolution.
ACU/ADU Bootable Utility
The MSA1000 Support Software CD is a bootable media that enables
(solution chosen as
a server to boot into a Linux shell and launch the ACU allowing the
appropriate for operating
user to configure the MSA1000 storage or generate a diagnostic
system)
report without requiring a pre-installed operating system or drivers.
DA - 11033
Worldwide — Version 23 — August 15, 2005
Page 4
QuickSpecs
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
MSA1000 Highlights
Compatibility
Servers
Supports most 32-bit ProLiant servers including BL20P G2, BL20P G3,
BL25P, BL30P, BL35P, BL40P, DL145. DL360, DL360 G2, DL360 G3,
DL360 G4, DL380, DL380 G2, DL380 G3, DL380 G4, DL385, DL560,
DL580, DL580 G2, DL580 G3, DL585, DL740, DL760, DL760 G2,
ML330, ML330 G2, ML330 G3, ML350, ML350 G2, ML350 G3, ML350
G4, ML370, ML370 G2, ML370 G3, ML370 G4, ML530, ML530 G2,
ML570, ML570 G2, ML750.
(See HBA and Switch FC components for various support limitations)
Certification of new ProLiant models is ongoing.
Supports most multi-vendor industry standard 32-bit Intel-based (x86) servers.
Supports most 64-bit Integrity including Integrity Superdome rx1600, rx1620,
rx2600, rx2620, rx4610, rx4640, rx5670, rx7620, rx8620, rx8800, rx9610
and PA-RISC servers A180, A180C, A400, A500, rp2400, rp2430, rp2450,
rp2470, rp5400, rp5430, rp5450, rp5470, rp3410, rp3440_1, rp4440_1,
rp7400, rp7410, rp7420_1, rp8400, rp8420_1, SD16000, SD32/64/128, SD32000, SD64000. Certification is ongoing with new models
as they are introduced.
Also supports specific Alpha servers running Tru64 UNIX or OpenVMS.
SCO supported is extended to ML350 G4, ML570 G2, DL380 G4, ML370
G3, ML530 G2, ML570 G2, DL380 G3 & DL760 G2.
DA - 11033
Worldwide — Version 23 — August 15, 2005
Page 5
QuickSpecs
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
Models
HP StorageWorks
1000 Modular Smart
Array
MSA1000, with 256 MB cache
MSA1000 Controller, with 256 MB cache
256 MB Cache Module upgrade for Controller
MSA Fibre Channel I/O Module
MSA Hub 2/3 (integrated) ships with 2 SFPs installed
MSA SAN Switch 2/8 (integrated) ships with 4 SFPs installed
2 Gb SFP SW Transceiver Kit
MSA1000 additional
Modular Smart Array 30 (MSA30) drive enclosure, single bus
drive enclosures
Modular Smart Array 30 (MSA30) drive enclosure, dual bus
MSA1000 SAN Starter Kit HP StorageWorks MSA1000 SAN Starter Kit (Windows, NetWare or Linux compatible)
NOTE: Includes (1) MSA1000 (1) MSA SAN Switch 2/8 (2) FCA2214 + cables.
MSA1000 SAN Starter Kit HP StorageWorks MSA1000 SAN Starter Kit HA Bundle
High Availability Option NOTE: Includes (1) redundant controller; (1) HP MSA SAN Switch 2/8 (4) SFP
transceivers (2) FCA2214 HBAs + cables. Designed as upgrades for the MSA1000
SAN Starter Kits. Software is required to enable path failover. This can be Industry
Standard (MPIO for Windows, QLogic for Linux) or optional Secure Path (available for
most Windows, Linux and NetWare versions)
2 Gb Fibre Channel
FCA2214 Host Adapter (Linux, NetWare, SCO & 32-bit Windows)
HBAs
FCA2214DC dual channel Host Adapter (Linux, NetWare, SCO & 32-bit Windows)
Windows 32-bit single channel PCI-X (Windows Server 2003, W2K)
Windows 32-bit dual channel PCI-X (Windows Server 2003, W2K)
FCA2404 Host Adapter PCI-X (32-bit Windows including NT)
FCA2404DC dual channel Host Adapter PCI-X (32-bit Windows including NT)
2Gb PCI-e for 32-bit Windows
Host Adapter for Windows Server 2003 64-bit, Integrity servers, single channel 2 Gb
PCI-X
Host Adapter for Windows Server 2003 64-bit, Integrity servers, dual channel 2 Gb
PCI-X
Host adapter Q2300 64-bit PCI-X for Linux, Integrity servers
Host adapter PCI-X Dual channel for HP-UX and Linux, Integrity servers
HP-UX HBA: PCI 2GB Fibre Channel Adapter
HP-UX HBA: PCI-X 2Gb Fibre Channel/1000Base-T
HP-UX HBA: PCI-X 2Gb Fibre Channel/1000Base-SX
Secure Path Workgroup HP StorageWorks Secure Path v4.0C for Windows Workgroup Edition
Editions
HP StorageWorks Secure Path v3.0C for NetWare Workgroup Edition
Secure Path v3.0C for Linux Workgroup Edition
ProLiant Cluster Starter Kit for the Entry Level SAN for Windows 2000 and Windows
2003 (dual server, single path
ProLiant Cluster HA/F200 for Entry Level SAN, Windows 2000 and Windows 2003
(dual server, redundant path)
DA - 11033
Worldwide — Version 23 — August 15, 2005
201723-B22
218231-B22
254786-B21
218960-B21
286763-B21
288247-B21
A6515A
302969-B21
302970-B21
353803-B22
397079-B21
281541-B21
321835-B21
A7388A
A7387A
305573-B21
323264-B21
A7560A
AB467A
AB466A
A7538A
A6826A
A6795A
A9784A
A9782A
213076-B26
222411-B22
T3581A
364023-B21
364026-B21
Page 6
QuickSpecs
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
Models
MSA1000 Small Business
SAN Kit
(Windows and Linux 32-bit
servers only)
HP StorageWorks MSA1000 Small Business SAN Kit
NOTE: Includes (1) MSA1000; (1) 2/8q FC Switch; (2) FC HBA's (PN A7523A) +
cables.
The MSA1000 SMB Kit is not designed to connect to any other StorageWorks SAN or
interconnect. See the MSA1000 SMB link at http://www.hp.com/go/msa1000 for
additional details
HP StorageWorks MSA1000 Small Business HA Upgrade Kit for Windows and Linux
NOTE: Includes (1) redundant controller; (1) Fibre Channel I/O Module (1) 2/8q FC
Switch; (2) FC HBA's (PN A7523A); and cables.
Itt may only be used with the MSA1000 SMB Kit (A7450A)
2 Gb, 32-Bit/133 MHz PCI-X-to-Fibre Channel Host Bus Adapters
NOTE: This is a single channel HBA for Windows 2000, Windows 2003, and Linux. It
may only be used with the MSA1000 SMB Kit (A7450A)
DA - 11033
Worldwide — Version 23 — August 15, 2005
A7450A
A7452A
A7523A
Page 7
QuickSpecs
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
MSA1000 Components
With the following components, your storage capacity and performance can be scaled to new levels:
HP StorageWorks
The 4U cabinet houses up to fourteen 1" Universal hot pluggable Ultra2, Ultra3, and/or Ultra320 drives.
Modular Smart Array
Each MSA1000 includes the following standard components: (1) MSA1000 Controller, (1) MSA Fibre
1000
Channel I/O Module with a single SFP, dual hot pluggable fans/power supplies and power cables,
documentation and a support software CD.
The modular design of the MSA1000 makes it possible to add redundant controllers, redundant single
port Fibre Channel I/O Modules, 3-port hub, or embedded fabric switch and storage expansion
enclosures. Additional storage enclosures may be added without power cycling the MSA1000.
MSA1000 Controller
The MSA1000 Controller is an integrated RAID controller with an LCD/LED status display and 256 MB
read/write battery-backed cache (expandable to 512 MB per controller). One MSA1000 Controller is
included with the MSA1000; a redundant MSA1000 Controller is an option. Purchase of Secure Path
software or use of Microsoft's MPIO or the QLogic Failover Solution for Linux is a requirement if a
second controller is chosen.
Key Features
Redundant controller support with mirrored cache
Fabric, Private Loop & Public Loop Support
Auto Negotiated F, FL & L Port Login
RAID 0, 1, 1+0, 5 and ADG
2 Gb/1 Gb Frequency Agile
Primary & Secondary Inter-Controller Link (ICL)
Host based configuration via ACU (OS dependent)
Optionally configurable with Command Line Interface (CLI)
Remote configuration and monitoring via ACU (offline and remote) &
Insight Manager (OS dependent)
MSA1000 Controller
Selective Storage Presentation:
Presentation allows multiple hosts to access a single
Management Features
MSA1000 storage system. Host access can be defined all the way
down to a logical volume level.
Online RAID Level Migration:
Migration allows for online post-configuration
change to RAID level without destroying data or volume information.
Online Capacity Expansion:
Expansion : lets you add storage to an operational
MSA1000-reducing expensive server downtime.
Global Online Spare:
Spare reduces the risk of data loss by facilitating
automatic rebuilds after a drive failure.
Fault Tolerance
Several fault tolerant configurations which keep data available and servers
running while drives are being replaced are supported including:
RAID 6 with Advanced Data Guarding: Allocates the equivalent of two
parity drives across multiple drives and allows simultaneous write
operations.
Distributed Data Guarding (RAID 5): Allocates parity data across
multiple drives and allows simultaneous write operations.
Drive Mirroring (RAID 1, (1+0 Striped Mirroring)): Allocates half of the
drive array to data and the other half to mirrored data, providing two
copies of every file.
DA - 11033
Worldwide — Version 23 — August 15, 2005
Page 8
QuickSpecs
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
MSA1000 Components
Fault Recovery
Minimizes downtime, reconstructs data, and facilitates a quick recovery from
drive failure:
Online Spares: If a failure occurs, recovery begins with an online spare
and data is reconstructed automatically. Multiple online spares can be
assigned per array and used across multiple arrays. It is also possible
to assign different online spares across different arrays.
Array Accelerator: Onboard, battery-backed cache memory protects
data in the event of a power failure. In the unlikely event of a controller
failure, the battery-backed cache will save critical user data for up to
three days.
MSA Fibre Channel I/O
Module
Provides a single 2 Gb Fibre Channel connection per controller from the host side into the MSA1000.
The MSA Fibre Channel I/O Module includes one 2 Gb, Short Wave, Small-Form-Factor-pluggable
Transceiver (SFP). A second MSA Fibre Channel I/O Module can be installed for redundancy when a
redundant controller is used.
The single I/O module can be used in a direct connect configuration (no switch or hub) in Windows,
Linux, NetWare, SCO and HP-UX only.
MSA SAN Switch 2/8
(embedded)
The optional MSA SAN Switch 2/8 offers low price per port and full scalability, doing so while taking zero
rack space, even in a redundant configuration. This second generation integrated switch option offers the
customer more ports than our previous offering and is a full member of the HP SAN Switch family,
assuring interoperability from the smallest to the largest SAN configuration. The HP StorageWorks MSA
SAN Switch 2/8 can be used by the true entry-level customer looking for a very inexpensive switch based
on cost per port. This same switch can be attractive to the larger customer who must have the
interoperability with their other external B-Series SAN switch products from HP and especially appreciates
the rack space saving characteristics.
(The MSA SAN Switch 2/8 replaced the obsolete MSA Fabric Switch 6 option.)
Key Features
Eight 2 Gb ports: 1 to controller, 7 user accessible
Product ships with 4 SFPs installed
No E-port restriction, accepts all optional software
Interoperates with external HP B-Series SAN Switch 2 Gb switches
Configuration and management methodology common with SAN
Switch product line, same methods as installed base of 40,000+ HP 1
and 2Gb SAN Switches
DA - 11033
Worldwide — Version 23 — August 15, 2005
Page 9
QuickSpecs
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
MSA1000 Components
MSA Hub 2/3
(embedded)
The HP StorageWorks MSA Hub 2/3 is a low-cost interconnect designed for clustering or low cost, high
speed attachment of two servers to the MSA1000. The MSA Hub 2/3 is a 3-port Fibre Channel
Arbitrated Loop hub that is mounted on a blade that easily installs inside the MSA1000 storage unit,
saving valuable rack space. Two of these hubs may be installed for redundancy within the MSA1000.
The MSA Hub 2/3 is not cascadable. It is not certified for Alpha environments.
The hub presents the user with two SFP ports for simple direct attachment to two single or clustered
servers without having to purchase an external interconnect device. It offers the most cost-effective
solution for a user to enable a clustered server environment.
High Performance: supports MSA1000 with a 2 Gb interconnect capable of up to 200 MB
throughput
Low Cost: supports the entry-level SAN array with the most cost effective option for 2-node
clustering
Compact: installs in the MSA1000, replacing the I/O module, saving valuable rack space
Complete: comes with two SW SFPs - no need for further investment
Not qualified with servers utilizing Tru64 UNIX or OpenVMS operating systems.
2 Gb Small Form Factor
pluggable (SFP) SW
Transceiver Kit
2 Gb Small-Form-Factor-pluggable (SFP) SW Transceivers are industry standard connection devices,
which hot plug into 2 Gb infrastructure components such as 2 Gb Fabric Switches. HP StorageWorks 2
Gb SFP SW Transceivers support distances up to 300 meters at 2 Gb and 500 meters at 1 Gb using
multi-mode fiber optic cable.
Multi-Mode Fibre Channel Multi-Mode Fibre Channel cables provide a thin, flexible cabling solution that is immune to
Cables
electromagnetic interference. HP offers cables to connect the MSA1000 to both 2 Gb and 1 Gb Fibre
Channel infrastructures. LC to LC cables are used when connecting the MSA1000 to other 2 Gb Fibre
Channel components because both connections will utilize small form factor transceivers. LC to SC
cables are used when connecting the MSA1000 to 1 Gb Fibre Channel components. 1 Gb components
use the larger GBIC style transceivers.
DA - 11033
Worldwide — Version 23 — August 15, 2005
Page 10
QuickSpecs
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
Software Components
The MSA1000 utilizes a single, consistent set of utility software for storage and RAID management, setup, configuration and
troubleshooting. This consistency reduces the cost of ownership by reducing the training and technical expertise necessary to install
and maintain your HP storage solution.
Array Configuration Utility
Provides a graphical view of HP drive array configurations
(solution chosen as
Easy to use Wizards for configuration
appropriate for operating
ACU supports on-line configuration
system)
Web Based ACU supports On-Line, Remote Web Based and Off-line configuration
Runs online on Microsoft Windows NT 4.0 and Microsoft Windows 2000 and 2003
Selective Storage
Presentation (SSP)
Built-in to MSA1000 Controller firmware and controlled via ACU
Allows setting of access rights to the MSA1000 storage by hosts
Access control can be set up to a logical volume level using the Array Controller Utility
Insight Manager
(solution chosen as
appropriate for operating
system)
Powerful storage, server and server option management tool
Monitor storage from a remote central location
Browser based System Insight Manager provides full access from anywhere on the Intranet,
eliminating the need for a dedicated Insight Manager management console
OS Support
Microsoft Windows Server 2003 (32 & 64-bit)
Microsoft Windows 2000 Server and Advanced Server (sp3)
Microsoft Windows NT 4.0 Server and Enterprise Edition (sp6a)
NetWare 5.1, 6 and 6.5
Red Hat Linux Enterprise Advanced Server 2.1 and Enterprise Linux 3.0 (32 & 64-bit) & 4.0 (32-bit
& 64-bit )SuSE Linux SLES8 and SLES9 (32 & 64-bit )
SuSE Linux SLES 8 (32 & 64-bit )
Please refer to Compatibility Guide at http://www.hp.com/go/msa1000 for complete
configuration support on the above operating systems.
Tru64 UNIX or OpenVMS supported in homogeneous environments only (no hub support).
HP-UX 11.11, and 11.23 homogeneous environments only. (limited single controller
homogeneous configurations)
SCO OpenServer 6.0.0, SCO UnixWare 7.1.3, UnixWare 7.1.4 (limited single controller
homogeneous configurations) The MSA SAN Switch 2/8 and the MSA Hub 2/3 are supported.
HP-UX support
The MSA1000 for HP-UX supports single controller configurations only. HP-UX support is of a
homogeneous nature. Command Line Interface (CLI) is used for configuration and Event Monitoring
Service (EMS) for monitoring. Root/Boot/Dump/Swap/Install is also supported. PV Links is supported for
multi (HBA) path / single controller (2 HBAs) configurations. HP-UX support is now enabled with the
standard firmware that ships with the MSA1000.
Command Line Interface (CLI) is used for configuration and Event Monitoring Service (EMS) for
monitoring.
Root/Boot/Dump/Swap/Install is also supported.
PV Links is supported for multi (HBA) path / single controller (2 HBAs) configurations.
Fabric, hub and direct Connect are supported
HP-UX 11.11 & 11.23, PA-RISC and Itanium
DA - 11033
Worldwide — Version 23 — August 15, 2005
Page 11
QuickSpecs
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
Software Components
SCO UnixWare and
OpenServer
HP's MSA1000 SAN solution is available today to run on SCO UnixWare 7.1.3 and 7.1.4 and SCO
OpenServer 6.0.0. The MSA1000 with a single controller may be connected to a ProLiant server with
SCO UnixWare in one of the below described manners:
Direct Attach
Through an internal Hub
Through an internal switch
The StorageWorks FCA2214 and the FCA2214DC are the approved HBAs.
Software Certifications
Microsoft Cluster Server Certification
HP Serviceguard for Linux (& HP-UX with special 2-MSA1000 configuration)
Hewlett Packard Data Protector
VERITAS Backup Exec and NetBackup
Legato NetWorker for Windows
Computer Associates BrightStor Enterprise Backup
SteelEye LifeKeeper for Linux Certification
Please refer to compatibility matrix at http://www.hp.com/go/msa1000 for complete configuration
support.
DA - 11033
Worldwide — Version 23 — August 15, 2005
Page 12
QuickSpecs
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
Optional Software
HP StorageWorks Secure HP StorageWorks Secure Path is a family of high availability multi-pathing software products providing
Path
continuous data access from the HP RAID Array to host servers running the Windows Server 2003,
Windows 2000, Windows NT, Linux and NetWare operating systems.
Redundant hardware, advanced RAID technology and Secure Path's automated failover capability are
used to enhance fault tolerance and availability. Secure Path effectively eliminates controllers, disk drives,
interconnect hardware and host bus adapters as single points of failure in the storage subsystem.
The attachment of non-Secure Path (single HBA) servers to an MSA1000 with dual controllers that has
servers with Secure Path (dual HBA) attached is supported where the operating systems are Windows or
NetWare. Users must realize that in event of a controller fail-over (failure of active controller) the single
path servers will lose access to their data on the MSA1000.
NEW - Secure Path can now support up to an 8-node cluster in Windows Server 2003.
NOTE: If Secure Path for Linux is used on any node or cluster attached to an MSA1000, all nodes must
also have Secure Path installed, regardless of operating systems.
NOTE: refer to http://www.hp.com/go/securepath for the latest Secure Path parameters.
Key Features
Maintains connections to storage
Monitors I/O paths and alerts on significant events
Used in
Stand alone Configurations
Cluster configurations
SAN configurations
MSA1000 utilization of
HP supports additional high availability multi-pathing capabilities within various operating systems and
Industry Standard fail-over through third-party vendors, providing continuous data access from HP's RAID MSA1000 to host servers.
solutions
Options are available for servers running the Windows and Linux, operating systems. More information
and the explanation of restrictions are available at
http://h18006.www1.hp.com/products/sanworks/multipathoptions/index.html
Microsoft Windows 2000 and 2003 (32 bit EE and 64 bit EE only)can utilize the HP MPIO Basic
Failover v1.0 for MSA Arrays, a DSM available for free download at the above site.
Unlike under Secure Path you are limited to a 4-node cluster.
Linux industry standard failover for the MSA1000 is available at no charge within the FCA2214
HBA device driver from QLogic.
MSA1000 clustering
Clustering is rapidly gaining in popularity as users desire a high level of data availability. Many of the old
cluster restrictions that were the product of both hardware and operating systems have been overcome.
While there still remain configuration limits, the result is a new high degree of flexibility both in number of
clusters, mixing clusters with single nodes, and the integration of dissimilar operating systems.
For example you may mix three Microsoft (Windows Server 2003, Windows 2000, or Windows NT)
clusters and other individual servers, even doing so in a heterogeneous server operating system
environment. Windows Server 2003 allows a single cluster of up to eight nodes, now with Secure Path
protection.
Single-path (single controller, non-Secure Path) NetWare clustering has been successfully tested up to a
12-node cluster. NetWare clusters employing Secure Path (dual controller, dual HBAs) are limited to six
nodes. Multiple NetWare clusters (and single servers) may have concurrent access with no limitation
inherent to the MSA1000. Likewise up to a 16-node Linux cluster (single controller, non-Secure Path)
utilizing SteelEye LifeKeeper for Linux clustering software has been tested and is supported. Presently a
Linux/Secure Path configuration is limited to a two-node cluster. Refer to
http://www.hp.com/go/securepath for any restriction on Linux with Secure Path.
The MSA1000 has the ability to be configured with thirty-two LUNs. Best practices would dictate
generally no more than sixteen servers accessing a single MSA1000. More commonly, users have had an
average of five to eight nodes. This can be any combination of hosts or clusters with different operating
systems while holding fast to the guidelines and limits described in the above paragraphs. Performance
DA - 11033
Worldwide — Version 23 — August 15, 2005
Page 13
QuickSpecs
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
Optional Software
within these guidelines is heavily dependent on the actual number of end users and types of applications
being employed.
For more information, click on the link: http://www.hp.com/solutions/ha.
ProLiant Cluster F200 for
the Entry Level SAN
(Microsoft)
The ProLiant Cluster F200 for the Entry Level SAN is designed to assist in simplifying the
configuration of cluster solutions that provide high levels of data and applications availability in
the Microsoft Windows Operating System environment through clustering to provide no-singlepoint-of-failure. The ProLiant Cluster F200 for the Entry Level SAN supports a two-node cluster
based on Microsoft Windows 2000 Advanced Server and two to eight-nodes cluster based on
Microsoft Windows Server 2003 Enterprise Edition operating system, the StorageWorks Modular
Smart Array 1000 (MSA1000) and MSA1500 cs, or Raid Array RA4100 and ProLiant Servers. This
solution also supports StorageWorks Secure Path management software.
HP ProLiant Cluster HA/F200 for Entry Level SAN (Microsoft)
364026-B21
HP Serviceguard for Linux HP Serviceguard is a high availability solution that leverages the strength of HP's experience in the HA
business, bringing the best-in-class mission critical technologies to the Linux environment and ProLiant
and Integrity servers. HP Serviceguard provides critical applications the high availability that enterprise
customers require for 24x7 business operations. It is designed to protect applications from a wide variety
of software and hardware failures, monitoring the health of each server (node) and quickly responding to
failures including system processes, system memory, LAN media and adapters, and application
processes. Serviceguard enables customers to cluster HP ProLiant and Integrity server families with shared
storage from HP Modular Smart Array 500 to HP StorageWorks XP disk arrays in a 2-node SCSI or 2 to
16-node Fibre Channel configuration.
Please refer to the HP ProLiant High Availability web site under Linux clustering for ProLiant for the latest
information on Serviceguard for Linux: http://www.hp.com/servers/proliant/highavailability/serviceguard
For general Serviceguard information (HP-UX and Linux), please refer to:
http://www.hp.com/go/serviceguard
HP Serviceguard for Linux ProLiant Cluster, A.11.16 (2 license version)
305199-B26
HP Serviceguard for Linux, A.11.16 (single license version)
307754-B26
HP Serviceguard for Linux ProLiant Cluster (per 2-node cluster) A.11.15
305199-B24
HP Serviceguard for Linux (per 32-bit server) A.11.15
307754-B24
HP ProLiant Clusters for
NetWare
HP supports a broad range of solutions for NetWare Cluster services including configurations featuring
the MSA1000 and optionally with HP StorageWorks Secure Path. These solutions provide high
availability and maximum resource utilization for NetWare environments from small file sharing
implementations to enterprise business computing. Single-path (single controller, non-Secure Path)
NetWare clusters of up to 12-nodes have been successfully tested. Presently 2-node NetWare clusters
with Secure Path have been tested and approved with larger NetWare cluster testing planned. Multiple
NetWare clusters are allowed.
NOTE: Refer to http://www.hp.com/go/securepath for the latest Secure Path for NetWare parameters.
DA - 11033
Worldwide — Version 23 — August 15, 2005
Page 14
QuickSpecs
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
Optional Software
HP ProLiant Parallel
Database Clusters for
Oracle on MSA1000
The HP Parallel Database Clusters (PDC) for Windows and Linux provide the industry's leading platform
for deployment of Oracle 9i Real Application Clusters. The PDC is a multi-node (up to six in Microsoft
environments and up to four with Linux)) shared-storage clustering environment that enables industry
standard Windows and Linux platforms to deliver performance previously limited to very large SMP (16 to
32 processor) environments. Every server node in the cluster has concurrent read-write access to the
common shared database residing on the MSA1000 storage SAN. The multi-node architecture is
inherently highly available, loss of any single node results in some degradation of performance but the
database remains active and accessible. When optimally integrated with Oracle load balancing and
transparent application reconnect features, clients are completely insulated from the loss of a server
resource or an Oracle instance failure on a node. To complement the high availability of the server
cluster in a Windows environment, the Parallel Database Cluster integrates HP StorageWorks Secure
Path for fully redundant access to the database in the even of any failure in SAN connectivity. Secure Path
for Linux will be available at a later date. Combined, the Oracle clustering technology and HP platform
technology deliver cost effective and highly available enterprise solutions for database applications.
For more specific information concerning configuration, interconnect options, and dual path software
refer to the HP/Oracle site at
http://h18000.www1.hp.com/solutions/enterprise/highavailability/oracle/index.html.
HP OpenView storage
virtual replicator
(Microsoft environments)
Storage Virtual Replicator combines a rich set of innovative capabilities that enhances and simplifies
storage management for Windows Server 2003 and Windows 2000 environments. Through
virtualization, online volume growth, snapshot and management features, the software complements the
capabilities within the operating system. HP OpenView Storage Virtual Replicator enables simplification
of storage configuration, management, scalability and enhanced availability with e-mail notification for
event customization, enhanced pool deletion that enables deletion of pool or disk containing snapshots,
enhanced policy descriptions for easier identification.
Key Features
Support for Windows 2000 and Windows Server 2003
Virtualization - multiple storage arrays can be consolidated into a pool of disk space for individual
or clustered systems to use. Multiple virtual disks, up to 2 terabyte in size, can be created from a
pool for users and their applications. Existing storage units with production data can be imported
into a pool. The data partition is preserved as a virtual disk and unused capacity is added to the
pool.
Online volume growth - Enables easy, non-disruptive growth for Windows 2000 or and Windows
Server 2003 with zero downtime. Allows a system administrator to grow an existing volume on
virtual disks and Windows 2000 basic disk. The system will remain online, and the data on the
volume will remain intact.
Snapshots - Instant, point-in-time snapshots for backup, online restore, testing or data mining.
Enable instant creation of multipurpose virtual replicas of production data without the requirement
of a physical copy Snapshots identical to ordinary physical disks, with both read and write
capability. Snapshots can remain online for restore operations, testing, and data mining. Full
interoperability with the Windows Server 2003 Volume Shadow-copy Service (VSS).
E-mail notification - customization of events for servers under your span of control.
Enhanced pool deletion - delete a pool that contains snapshots and virtual disks or delete a virtual
disk that contains snapshots with the DELTREE command.
Interoperability with OpenView Storage Mirroring
Enhanced policy descriptions - the policy key descriptions have been updated for easier
identification.
Please refer to the Optional Software section of this document or visit http://www.hp.com/go/msa1000
for additional details.
DA - 11033
Worldwide — Version 23 — August 15, 2005
Page 15
QuickSpecs
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
Optional Software
HP OpenView Storage
Mirroring
OpenView Storage Mirroring is designed to take small-medium enterprises beyond periodic backup to
provide continuous data protection with minimal data loss and immediate recovery from any disaster or
system outage. Utilizing patented STAR technology, OV Storage Mirroring captures byte-level changes as
they happen and replicates those changes to one or more target servers at any location in the exact
sequence sent by the source. Advanced features put you in control of bandwidth usage, queue data
changes for replication during off-peak hours, enable e-mail, pager or wireless notification when
changes occur and scales organically to meet the need of your environment. OV Storage Mirroring is the
core component to the following solutions: disaster recovery, remote availability, centralized backup,
serverless backup, data distribution, mining and server/storage migration.
Supports Microsoft Windows 2000/NT/2003servers
One-to-one failover/fail back solution for MS-Exchange, MS-SQL and Oracle providing automatic
failover and near instantaneous access to replicated data or use replicated data or rebuild your
local server.
Server Groups - enables the "grouping" of servers on the management console (GUI) allowing
focus on only those servers under your span of control
Continuous, asynchronous byte-level replication with intelligent data compression captures
changes as they occur, ensures sequence of data mirrored on target, and provides userconfigurable compression levels to ensure efficient usage of network resources.
One-to-many and many-to-one host configurations allowing multiple production servers to use the
same target server
For more information visit http://h18006.www1.hp.com/products/storage/software/sm/index.html
DA - 11033
Worldwide — Version 23 — August 15, 2005
Page 16
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
QuickSpecs
Configure to Order Program Information
HP introduces the new Configure to Order program on a limited basis. It is not yet available in all areas. The MSA1000 and its
options may or may not be factory installed in a rack with add-on controllers, switches, hubs, MSA30 enclosures and hard drives.
The MSA1000 may be integrated with 64-bit Integrity and PA-RISC servers or ProLiant or as standalone storage.
Configure to Order
Products Approved for CTO
Modular Smart Array 1000
HP MSA1000 Controller 256 cache ALL
256 MB Cache Upgrade
2 Gb FC Port Kit
MSA SAN Switch 2/8 ALL
MSA1000 Embedded 3-port Hub
MSA30 U320 Enclosure, single bus
300 GB Pluggable Ultra320 Universal Hard Drive, 10,000 rpm (1")
146 GB 10K U320 Pluggable Hard Drive WW
72 GB 10K U320 Pluggable Hard Drive WW
146.8 GB Pluggable Ultra320 Universal Hard Drive, 15,000 rpm (1")
72 GB 15K U320 Pluggable Hard Drive WW
36 GB 15K U320 Pluggable Hard Drive WW
2m LC-LC multimode FC cable
5m LC-LC multimode FC cable
15M LC-LC multimode FC cable
30M LC-LC multimode FC cable
50M LC-LC multimode FC cable
42U EVA cab 60Hz
42U EVA cab 50Hz
36U EVA cab 60Hz
36U EVA cab 50Hz
22U EVA cab 60Hz
22U EVA cab 50Hz
HP9000 Std Rack System E25
HP Rack System/E, 33U, quartz color
HP Rack System/E, 33U, graphite color
HP Rack System/E, 41U, quartz color
HP Rack System/E, 41U, graphite color
Rack 10642 42U Shock ALL
Rack 10636 36U Shock ALL
DA - 11033
Worldwide — Version 23 — August 15, 2005
CTO SKUs
201723-B22 #0D1
218231-B22 #0D1
254786-B21 #0D1
218960-B21 #0D1
288247-B21 #0D1
286763-B21 #0D1
302969-B21 #0D1
350964-B22 #0D1
286716-B22 #0D1
286714-B22 #0D1
347708-B22 #0D1
286778-B22 #0D1
286776-B22 #0D1
221692-B21 #0D1
221692-B22 #0D1
221692-B23 #0D1
221692-B26 #0D1
221692-B27 #0D1
338042-B21
338043-B21
338044-B21
338045-B21
338046-B21
338047-B21
A4900A
A4901A
A4901D
A4902A
A4902D
245161-B22
245162-B22
Page 17
QuickSpecs
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
Service and Support, HP Care Pack, and Warranty Information
Warranty
Three-year Limited Warranty for MSA1000, Fibre Channel Cables and SFP Transceivers
3 years parts exchange
1 year labor
1 year on-site
Next business day response
Options for the MSA1000 carry their own warranty. Refer to HP's Limited Warranty Statement for further
details. In countries where available, your HP Limited Warranty includes Customer Self Repair warranty
services. Please refer to HP's Limited Warranty Statement for further details:
http://h18006.www1.hp.com/products/storageworks/warranty.html
Products included in various Kits carry their own individual warranties.
Warranty Upgrade
Options
Response – Upgrade on-site response from next business day to same day 4 hours
Coverage – Extend hours of coverage from 9 hours x 5 days to 24 hours x 7 days
Duration – Select duration of coverage for a period of 1, 3, or 5 years
Storage Service Packages
HP Care Pack is defined as an upgrade to the product warranty attribute, available for a specific
duration and hours of coverage.
HP Care Pack is not available for less than the product's warranty duration.
HP Care Pack is available for sale anytime during the warranty period for most products, but the
commencement date will be the same as the Warranty Start Date (delivery date to end user
customer). Proof of purchase may be required.
HP Care Pack services are prepaid.
For additional information on Product Services and HP Care Pack, as well as orderable part numbers,
please refer to the URL: http://www.hp.com/hps/carepack/.
If you have specific questions about availability or how to obtain services contact your local HP
representative. Contact information for your local area can be found at:
http://www.hp.com/services.
Software Product Services Software product services
Product support provides the customer access to HP's experienced technical support
resources, as well as access to HP's Information Services database for support on a variety of multivendor/multiplatform software products. Product support includes escalation and problem coordination
with the appropriate engineering group. HP Services offer a variety of options to allow you to tailor your
product service to meet the needs of your organization. Basic warranty on products can be uplifted from
day one to ensure you receive the service you need when you need it.
DA - 11033
Worldwide — Version 23 — August 15, 2005
Page 18
QuickSpecs
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
Service and Support, HP Care Pack, and Warranty Information
Warranty and support
HP warrants only that the software media will be free of physical defects for a period of ninety (90) days
from delivery.
The following services are offered as HP Care Pack Services at the time of software product order:
Software Technical Support 24 x 7 (1 and 3 years) is available 24 hours per day, Monday through
Sunday, including holidays (includes phone-in software technical support 24 x 7 and software
product and documentation updates).
Installation Service (software installation) and Installation and Startup Service (software installation,
configuration, startup testing and knowledge transfer).
HP Care Pack services must be ordered with the product and are prepaid.
For tailored support contracts based on personalized statement of work contact your local support
center via http://www.HP.com/support.
Secure Path software services
Software product services included with Secure Path: One year of Software Technical Support 24 x
7 HP Care Pack Services (includes phone-in software technical support 24 x 7 and software
product and documentation updates).
HP Care Pack services are available to upgrade the one year of Software Technical Support 24 x
7 included with the Secure Path product to 3 full years.
Installation service (software installation)
For additional software product services information for North American HP Care Pack services, as well
as orderable part numbers, please refer to the URLs listed below:
All storage services: http://www.hp.com/hps/storage/.
All HP Care Pack Services: http://www.hp.com/hps/carepack/storage/cp_networked.html.
Software Support HP Care Pack Services: http://www.hp.com/hps/carepack/software/cp_storage.html.
Installation and Startup Services: http://www.hp.com/hps/storage/ns_implementation.html.
If you have specific service questions contact your local HP representative. Contact information for your
local area can be found at: http://www.compaq.com/support.
Maintenance releases, bug fixes and software patches are available at:
http://www.compaq.com/support/sanworks.
Array Installation and
Startup Services
The HP Installation and startup for HP StorageWorks Disk Arrays service package provides installation
and configuration of HP StorageWorks Disk Array products. Service highlights include:
Installation and Startup provides, installation, LUN Disk Design and configuration of the MSA 1000
which includes
Service Planning
Service Deployment
Installation Verification Testing (IVT) required for this service
Customer Orientation session
Service Deployment includes the deployment of the MSA disc array into a new or pre-existing SAN which
may consist of switch, hub or SCSI bridge technology. Installation includes the customization of up to
four host servers, eight host bus adapters (hba's) and up to four high availability software licenses.
NOTE: Refer to Step 7 in the Configuration Information section below for all Service, Warranty Plans, Installation and Startup
Services available for the MSA1000
DA - 11033
Worldwide — Version 23 — August 15, 2005
Page 19
QuickSpecs
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
Configuration Information
Step 1 – Order Required Items
HP StorageWorks Modular Smart Array 1000
Includes:
(1) MSA1000 Controller with 256 MB cache
(1) MSA Fibre Channel I/O Module with 2 Gb SFP SW Transceiver
Redundant Hot Pluggable Power Supply/blower assemblies
Universal Rack mounting Kit
MSA1000 Support CD & Documentation
Serial cable
(2) Power cables
201723-B22
NOTE: Fibre Channel cables are ordered separately.
Step 2 – Choose Optional Non-Redundant MSA1000 System Options
MSA SAN Switch 2/8 (integrated) (Includes four 2Gb SFPs)
MSA Hub 2/3 (integrated) (Includes two 2 Gb SFP transceivers)
NOTE: The MSA SAN Switch 2/8 has a total of eight Fibre Channel ports. There are
seven ports accessible by the user and the eighth is internal to the controller. Four
SFPs are shipped installed in the Switch.
The MSA Hub 2/3 has two external Fibre Channel ports, both of which already have 2
Gb transceivers installed. (Not supported with Tru64 UNIX or OpenVMS).
DA - 11033
Worldwide — Version 23 — August 15, 2005
288247-B21
286763-B21
Page 20
QuickSpecs
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
Configuration Information
Step 3 – Choose Redundant MSA1000 System Options
Choose an interface
matching your original
MSA1000 Controller
256 MB Cache Modules for Controller (one additional for each controller)
HP StorageWorks Secure Path (appropriate model for the operating system) or choose
an industry standard failover solution where available
NOTE: Redundant configurations require two Host Adapters per server, an additional
controller and an I/O module, an MSA SAN Switch 2/8 or an MSA Hub 2/3 (for
Windows or NetWare), and Secure Path software for each server. An industry standard
fail-over solution such as Microsoft's MPIO for Windows or the QLogic solution for
Linux may be employed in place of Secure Path. For Microsoft ProLiant Clusters,
Secure Path software can be substituted with the ProLiant Clusters HA/F200 kit.
Mixing of the MSA Fibre Channel I/O Modular and the MSA SAN Switch 2/8 or the
MSA Hub 2/3 is not supported. When configuring the MSA1000 for redundant
controllers use either two MSA Fibre Channel I/O Modules, two MSA Hub 2/3s, or
two MSA SAN Switch 2/8s.
218231-B22
254786-B21
MSA Fibre Channel I/O Module (Includes one 2 Gb SFP transceiver)
MSA SAN Switch 2/8 (integrated) (Includes four 2 Gb SFP transceivers)
MSA Hub 2/3 (integrated) (Includes two 2 Gb SFP transceivers)
218960-B21
288247-B21
286763-B21
DA - 11033
Worldwide — Version 23 — August 15, 2005
Page 21
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
QuickSpecs
Configuration Information
Step 4 – Choose Supported Options For 2 Gb or 1 Gb Infrastructure
2 Gb Fibre Channel
Transceiver (SFP)
2 Gb SFP SW Transceiver Kit
2 & 4Gb Fibre Channel HP StorageWorks MSA SAN Switch 2/8 (embedded option for MSA1000 only)
Fabric "B-Series" family of NOTE: Includes four 2Gb SFP transceivers.
switches
HP StorageWorks SAN Switch 2/8V
HP StorageWorks SAN Switch 2/8V Power Pack
HP StorageWorks SAN Switch 2/16V
HP StorageWorks SAN Switch 2/16N
HP StorageWorks SAN Switch 2/16N Power Pack
HP StorageWorks SAN Director 2/128
HP StorageWorks SAN Director 2/128 Power Pack
HP StorageWorks SAN Switch 4/32 Power Pack
HP StorageWorks SAN Switch 4/32 with 32 active ports
HP StorageWorks SAN Switch 4/32 with 16 active ports
DA - 11033
Worldwide — Version 23 — August 15, 2005
A6515A
288247-B21
AA979A
AA980A
AA978A
AA990A
AA977A
AA981A
AA982A
A7394A
A7393A
A7537A
Page 22
QuickSpecs
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
Configuration Information
2 Gb Fibre Channel
HP StorageWorks Director 2/140
Fabric "M-Series" family of NOTE: 64-ports active. Ships with 64 SFPs
switches
HP StorageWorks Director 2/64
NOTE: 32 active ports. Ships with 32 SFPs
HP StorageWorks Edge Switch 2/32
NOTE: 16 active ports. Ships with 16 SFPs
8-FlexPort upgrade for Edge 2/32
HP StorageWorks Edge Switch 2/24
NOTE: 8 ports active. Ships with 8 SFPs
8-FlexPort upgrade for Edge 2/24
HP StorageWorks Edge Switch 2/12
NOTE: 4 ports active. Ships with 4 SFPs
4-FlexPort upgrade for Edge 2/24
2 Gb Fibre Channel
Cisco MDS 9506 Multilayer Director w/0SFPs
Fabric "C-Series" family of Cisco MDS 9509 Multilayer Director w/0 SFPs
switches
Cisco MDS 9216 Multilayer Fabric Switch w/16 SFPs
Cisco MDS 9216A Multilayer Fabric Switch
Cisco MDS 9216i Multilayer Fabric Switch
Cisco MDS 9120 Fabric Switch w/0 SFPs
Cisco MDS 9140 Fabric Switch w/0 SFPs
316093-B22
286809-B21
286810-B21
302660-B21
316095-B21
316096-B21
348406-B21
348407-B21
A7471A
A7462A
A7473A
A7558A
A7557A
A7426A
A7427A
2 Gb Fibre Channel
Integrated Hub
MSA Hub 2/3 (integrated option, comes complete with two SFPs)
NOTE: Not for use with ProLiant Blade servers, Tru64 UNIX or OpenVMS.
286763-B21
2 Gb Fibre Channel
HBAs
FCA2214 Host Adapter (Linux, Microsoft, NetWare 32-bit ) single channel
FCA2214DC Host Adapter (Linux, Microsoft, NetWare 32-bit) dual channel
2Gb PCI-e for 32-Bit Windows
Windows 32-bit single channel PCI-X (Windows Server 2003, W2K)
Windows 32-bit dual channel PCI-X (Windows Server 2003, W2K)
FCA2404 Host Adapter PCI-X (32-bit Windows NT)
FCA2404DC dual channel Host Adapter PCI-X (32-bit Windows NT)
Windows 64-bit, single channel, 64-Bit/133 MHz PCI-X to FC HBA
Windows 64-bit, dual channel, 64-Bit/133 MHz PCI-X to FC HBA
Host adapter Q2300 64-bit PCI-X for Linux, Integrity servers
Host adapter PCI-X Dual channel for HP-UX and Linux, Integrity servers
HP-UX HBA: PCI 2 GB Fibre Channel Adapter
HP-UX HBA: PCI-X 2 Gb Fibre Channel/1000Base-SX
HP-UX HBA: PCI-X 2 Gb Fibre Channel/1000Base-T
281541-B21
321835-B21
A7560A
A7388A
A7387A
305573-B21
323264-B21
AB467A
AB466A
A7538A
A6826A
A6795A
A9782A
A9784A
DA - 11033
Worldwide — Version 23 — August 15, 2005
Page 23
QuickSpecs
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
Configuration Information
Tru64 UNIX,
OpenVMS ONLY
FCA2684 - HP StorageWorks 2 Gb, Single Channel, 133 MHz PCI-X-to-Fibre
DS-A5132Channel Host Bus Adapter for Tru64 UNIX and future support for
AADS-A5134-AA
OpenVMSFCA2684DC - HP StorageWorks 2 Gb, Dual Channel, 133 MHz PCI-X-toFibre Channel Host Bus Adapter for Tru64 UNIX and future support of OpenVMS
FCA2684DC - HP StorageWorks 2 Gb, Dual Channel, 133 MHz PCI-X-to-Fibre
DS-A5134-AA
Channel Host Bus Adapter for Tru64 UNIX and future support of OpenVMS
302784-B21
FCA2684 2 Gb Single channel PCI-X Host Adapter (OpenVMS/Tru64 UNIX)
DS-A5132-AA
Fibre Channel Cables for Use 2 Gb Fibre Channel cables when connecting the MSA Fibre Channel I/O
2 Gb Infrastructure
Module, MSA Hub 2/3 or the MSA SAN Switch 2/8 to an HBA
2 m LC-LC Multi-Mode Fibre Channel Cable
5 m LC-LC Multi-Mode Fibre Channel Cable
15 m LC-LC Multi-Mode Fibre Channel Cable
30 m LC-LC Multi-Mode Fibre Channel Cable
50 m LC-LC Multi-Mode Fibre Channel Cable
Fibre Channel Cables for Use 1 Gb Fibre Channel cables when connecting the MSA Fibre Channel I/O Module
1 Gb Fabric Switches and and any HBA(s) to 1 Gb fabric switches.
Hub
2 m LC-SC Multi-Mode Fibre Channel Cable
5 m LC-SC Multi-Mode Fibre Channel Cable
15 m LC-SC Multi-Mode Fibre Channel Cable
30 m LC-SC Multi-Mode Fibre Channel Cable
50 m LC-SC Multi-Mode Fibre Channel Cable
221692-B21
221692-B22
221692-B23
221692-B26
221692-B27
221691-B21
221691-B22
221691-B23
221691-B26
221691-B27
Step 5 – Choose Hard Drives & StorageWorks Enclosures
Hard Drives
72.8 GB Pluggable Ultra320 Universal Hard Drive, 10,000 rpm (1")
146.8 GB Pluggable Ultra320 Universal Hard Drive, 10,000 rpm (1")
300 GB Pluggable Ultra320 Universal Hard Drive, 10,000 rpm (1")
36.4 GB Pluggable Ultra320 Universal Hard Drive, 15,000 rpm (1")
72.8 GB Pluggable Ultra320 Universal Hard Drive, 15,000 rpm (1")
146.8 GB Pluggable Ultra320 Universal Hard Drive, 15,000 rpm (1")
NOTE: All Ultra320 Universal Hard Drives are backward compatible to U2 or U3
speeds.
NOTE: For complete compatibility information, refer to the HP SCSI Hard Drive
Compatibility table located at http://www.hp.com/go/msa1000.
DA - 11033
Worldwide — Version 23 — August 15, 2005
286714-B22
286716-B22
350964-B22
286776-B22
286778-B22
347708-B22
Page 24
QuickSpecs
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
Configuration Information
StorageWorks Enclosures The MSA1000 cabinet holds fourteen 1" Universal Drives. Add one StorageWorks
Enclosure to increase capacity up to 28 drives. Add two HP StorageWorks Enclosures
to increase capacity up to the maximum of 42 drives.
MSA30 single bus enclosure
NOTE: Maximum of two can be connected to the MSA1000.
MSA30 dual bus enclosure
NOTE: Maximum of one can be connected to the MSA1000.
302969-B21
302970-B21
Step 6 – Choose Rack Options
10647 (47U) Rack Cabinet - Pallet
10647 (47U) Rack Cabinet - Crated
10642 (42U) Rack Cabinet - Pallet
245160-B21
245160-B23
245161-B21
10642 (42U) Rack Cabinet - Shock Pallet
NOTE: It is mandatory to use a shock pallet in order to ship racks with equipment
installed.
10642 (42U) Rack Cabinet - Crated
10636 (36U) Rack Cabinet - Pallet
10636 (36U) Rack Cabinet - Shock Pallet
NOTE: It is mandatory to use a shock pallet in order to ship racks with equipment
installed.
10636 (36U) Rack Cabinet - Crated
10622 (22U) Rack Cabinet - Pallet
10622 (22U) Rack Cabinet - Shock Pallet
NOTE: It is mandatory to use a shock pallet in order to ship racks with equipment
installed.
10622 (22U) Rack Cabinet - Crated
S10614 (14U) Rack Cabinet - Shock Pallet
NOTE: It is mandatory to use a shock pallet in order to ship racks with equipment
installed.
Rail Kit for mounting in a M-Series rack
245161-B22
DA - 11033
Worldwide — Version 23 — August 15, 2005
245161-B23
245162-B21
245162-B22
245162-B23
245163-B21
245163-B22
245163-B23
292302-B22
313877-B21
Page 25
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
QuickSpecs
Configuration Information
Step 7 – Choose HP Care Pack Services
Hardware Product
Services
9x5, Next Business Day, On-Site Coverage, 3 years
9x5, 4-Hour Response, On-Site Coverage, 3 years
24x7, 4-Hour Response, On-Site Coverage, 3 years
9x5, Next Business Day, On-Site Coverage, 5 years
9x5, 4-Hour Response, On-Site Coverage, 5 years
24x7, 4-Hour Response, On-Site Coverage, 5 years
Hardware Installation
Fixed Price Care Pack Part Numbers:
1 Yr Same Day 24x7/Onsite
1 Yr Same Day 13x5/Onsite
1 Yr Same Day 6 hr CTR
3 Yr next Day/Onsite
3 Yr 13x5 Same Day/Onsite
3 Yr 24x7 Same Day/Onsite
3 Yr 6 hr CTR
4 Yr 13x5 Same Day/Onsite
4 Yr 24x7 Same Day/Onsite
5 Yr 13x5 Same Day/Onsite
5 Yr 24x7 Same Day/Onsite
Hardware Installation
Installation and Startup
Flexible Care Pack Part Numbers:
Support - MSA1000, 1 Yr ND Hardware
Support - MSA1000, 3 Yr ND Hardware
Support - MSA1000, 1 Yr 4h 13x5 Hardware
Support - MSA1000, 3 Yr 4h 13x5 Hardware
Support - MSA1000, 1 Yr 4h 24x7 Hardware
Support - MSA1000, 3 Yr 4h 24x7 Hardware
Support - MSA1000, 1 Yr 6 hr CTR
Support - MSA1000, 3 Yr 6 hr CTR
Support - MSA1000, 1 Yr Support Plus
Support - MSA1000, 3 Yr Support Plus
Support - MSA1000, 1 Yr Support Plus 24
Support - MSA1000, 3 Yr Support Plus 24
Support - MSA1000, 1 Yr Proactive 24
Support - MSA1000, 3 Yr Proactive 24
Support - MSA1000, 1 Yr Critical Service
Support - MSA1000, 3 Yr Critical Service
DA - 11033
Worldwide — Version 23 — August 15, 2005
103840-002
402165-002
402164-002
170183-002
170185-002
170187-002
402162-002
UC761A/E
UC772A/E
UC773A/E
U6355A/E
U6356A/E
U6357A/E
U9934A/E
U9398A/E
U9399A/E
U9400A/E
U9401A/E
U4368A/E
UA868A/E
HA101A1-6FG
HA101A3-6FG
HA103A1-6FG
HA103A3-6FG
HA104A1-6FG
HA104A3-6FG
HA105A1-6FG
HA105A3-6FG
HA109A1-6FG
HA109A3-6FG
HA110A1-6FG
HA110A3-6FG
HA111A1-6FG
HA111A3-6FG
HA112A1-6FG
HA112A3-6FG
Page 26
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
QuickSpecs
Configuration Information
Configuration Examples
Two Node Redundant Cluster Solution (Intel based servers)
Quantity
1
1
2
4
4
1
14
Description
HP StorageWorks Modular Smart Array 1000
Additional MSA1000 Controller
MSA Hub 2/3
Host Adapter (appropriate model for operating system)
2 m LC-LC Multi-Mode Fibre Channel Cable
ProLiant Cluster HA/F200 for MSA1000 (includes Secure Path for two servers)
36.4 GB Pluggable Ultra320 Universal Hard Drive, 15K
Part Number
201723-B22
218231-B22
286763-B21
221692-B21
364026-B21
286776-B21
4 Host, 6TB, Redundant SAN Solution (Intel based servers)
Quantity
1
1
2
2
8
8
4
2
42
Description
HP StorageWorks Modular Smart Array 1000
Additional MSA1000 Controller
256 MB Cache Modules for Controller (one additional for each controller)
MSA SAN Switch 2/8 (Includes four 2 Gb SFP transceivers)
Host Adapter (appropriate model for operating system)
2 m LC-LC Multi-Mode Fibre Channel Cable
Secure Path Workgroup Edition (1 license per server), appropriate for operating
system
HP StorageWorks Enclosure MSA30
146.8 GB Pluggable Ultra320 Universal Hard Drive, 10,000 rpm (1")
DA - 11033
Worldwide — Version 23 — August 15, 2005
Part Number
201723-B22
218231-B22
254786-B21
288247-B21
221692-B21
190209-001
286716-B22
Page 27
QuickSpecs
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
Related Options
Storage Virtual Replicator 1 System LTU
v4.1.1
3 System LTU
(Microsoft operating
5 System LTU
systems)
10 System LTU
Base Media and Documentation Kit (license required)
1 System LTU upgrade:
3 System LTU upgrade:
5 System LTU upgrade:
10 System LTU upgrade:
1 System LTU upgrade Japan
Upgrade Media and documentation kits:
Secure Path v3.0C for
NetWare Workgroup
Edition
Secure Path v3.0C for NetWare Workgroup Edition one license
Secure Path v3.0C for NetWare Workgroup Edition five licenses
Secure Path v3.0C for NetWare Workgroup Edition 10 licenses
Secure Path v3.0C for NetWare Workgroup Edition 25 licenses
Secure Path v3.0C for NetWare Workgroup Edition 50 licenses
NOTE: Refer to http://www.hp.com/go/securepath for the latest Secure Path
parameters for NetWare.
Secure Path v4.0C for
Windows Workgroup
Edition (including
Windows Server
2003/32bit and 64-bit)
(Package includes separate programs for both the MSA1000 and the RA4000 and
RA41000 solutions.)
Secure Path v4.0C for Windows Workgroup one license
Secure Path v4.0C for Windows Workgroup Edition five licenses
Secure Path v4.0C for Windows Workgroup Edition 10 licenses
Secure Path v4.0C for Windows Workgroup Edition 25 licenses
Secure Path v4.0C for Windows Workgroup Edition 50 licenses
Secure Path v4.0C for Windows Workgroup Edition Upgrade License
Secure Path v4.0C for Windows Workgroup Edition for ProLiant BL line 8 licenses
NOTE: Refer to http://www.hp.com/go/securepath for the latest Secure Path
parameters for Windows.
Secure Path v3.0C for
Secure Path v3.0C for Linux Workgroup Edition one license
Linux Workgroup Edition Secure Path v3.0C for Linux Workgroup Edition five licenses
Secure Path v3.0C for Linux Workgroup Edition 10 licenses
Secure Path v3.0C for Linux Workgroup Edition for ProLiant BL line 8 licenses
Secure Path v3.0C for Linux Workgroup Edition 25 licenses
Secure Path v3.0C for Linux Workgroup Edition 50 licenses
NOTE: Refer to http://www.hp.com/go/securepath for the latest Secure Path
parameters for Linux.
DA - 11033
Worldwide — Version 23 — August 15, 2005
T3593A
T3598A
T3597A
T3594A
T3591A
T3599A
T3604A
T3603A
T3600A
T3615A
T3592A
222411-B22
231324-B22
231325-B22
231326-B22
231327-B22
213076-B26
231316-B26
231317-B26
231318-B26
231319-B26
261715-B24
325634-B23
T3581A
T3582A
T3584A
T3583A
T3585A
T3586A
Page 28
QuickSpecs
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
Related Options
Qlogic Failover Driver for Provides a single multi-path solution for Linux
Linux
Qlogic driver version 7.00.03 (or higher) for Red Hat Linux v3.0 U1
HP:FCA2214DC Bios:1.45 Driver:7.01.01 Driver:7.05.00
FW:Loaded from driver - Recommended Driver:7.05.00
Supported on HP FCA2214 (281541-B21); FCA2214DC (321835-B21) and HBA for 64-bit
Linux, Integrity Servers (A6826A) Host Bus Adapters
Offers static load balancing
For more information visit http://www.qlogic.com or
http://h18006.www1.hp.com/products/sanworks/multipathoptions/index.html
Windows MPIO Failover
Provides a single multi-path solution for Windows
Microsoft Windows 2000 and Windows Server 2003 (32bit and 64bit) operating systems
DSM driver is required from HP for operation and configuration:
http://h18006.www1.hp.com/products/sanworks/multipathoptions/index.html
Co-existence of MPIO with Secure Path on same server is not supported
Presently does not offer support for mixing with other path-failover methods
For more information visit http://www.microsoft.com or
http://h18006.www1.hp.com/products/sanworks/multipathoptions/index.html
Backup and Restore
Software
VERITAS NetBackup for Windows
VERITAS Backup Exec for Windows
HP Data Protector
Computer Associates BrightStor Enterprise Backup
See Implementation Blueprint for configuration and installation instructions for all
backup and restore software.
ProLiant Cluster for
MSA1000
ProLiant Cluster Starter kit (no Secure Path)
ProLiant Cluster F200 for the Entry Level SAN
ProLiant Cluster F200 for the Entry Level SAN (Japan)
DA - 11033
Worldwide — Version 23 — August 15, 2005
364023-B21
364026-B21
364026-291
Page 29
QuickSpecs
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
Technical Specifications
Modular Smart Array
1000 (MSA1000)
LED Indicators on Front
(3)
Power
Fault detected in one or more sub-systems
Fault in Enclosure Management
LED Indicators for Drive Drive Access (center)
Modules (3)
Online (left)
Drive Failure (right)
LED Indicators on Rear
Power Supply/Blower Assembly Fault (1)
Panel (4)
EMU (3) Power, A bus, B bus
Interface
Ultra3 SCSI to Hard Drives
2 Gb Fibre Channel to Hosts
Maximum Number of
Fourteen, 1-inch HP Ultra2, Ultra3 or Ultra 320 Universal Hard Drives
Drives
(msa1000 Cabinet); expandable to 42 using two additional HP
StorageWorks 4200/4300 Enclosures
Temperature Range
50° to 95° F (10° to 35° C), up to 8000’
Operating
-22° to 122° F (-30° to 50° C)
Shipping
NOTE: Derated 1°C per 1,000 feet of elevation
to 10,000 ft.
Relative Humidity
10% to 90%
Operating
Up to 95%
Non-operating
Input Power Requirements Rated Input Voltage
100 to 240 VAC
50 to 60 Hz
Rated Input Frequency
6 A Max
Rated Input Current
549 W*
Input Power (max)
The supply will handle 90Vrms - 254 Vrms (100 - 240 V, +6%, -10%)
Frequency is 47 - 63 Hz
Heat Dissipation (max)
1876 Btu/hr*
NOTE: Input Power and Heat Dissipation specifications are maximum values
and apply to worst-case conditions at full rated power supply load. The
power/heat dissipation for your installation will vary depending on the
equipment configuration.
4U Rack Form Factor
MSA1000 Cabinet
Dimensions (H x W x D) 6.9 x 19 x 20.5 in (17.5 x 48.3 x 52.1 cm)
Net 55 to 85 lb (24.95 to 38.56 kg)
Weight
Shipping Packaging
28.5 x 14.81 x 33.13 in (72.4 x 37.6 x 84.1 cm)
Dimensions (L x W x D)
75 to 105 lb (34.02 to 47.63 kg)
Weight (Gross)
User Interface
Controller display with Status Indicators (2) and push buttons (4) on front of
controller
Electrical Interface
LVD (Low Voltage Differential)
Protocol Support
Wide Ultra3 SCSI
SCSI Ports
4-channel: 2 internal, 2 external
Drives Supported
Up to 42 drives
Maximum Capacity
12TB (42 drives x 300GB)
Logical Drives (LUN)
Up to 32 Logical Drives
DA - 11033
Worldwide — Version 23 — August 15, 2005
Page 30
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
QuickSpecs
Technical Specifications
Maximum Logical Drive
size
Modular SAN Array 1000 User Interface
Controller
(218231-B22)
Electrical Interface
Protocol Support
SCSI Ports
Drives Supported
Maximum Capacity
Logical Drives
RAID Support
2.0TB
Controller Display with Status Indicators (2) and Push Buttons (4)
Status Indicators on front of Controller (16)
LVD (Low Voltage Differential)
Wide Ultra3 SCSI
4-channel: 2 external/2 Internal
Up to 42 drives
12TB (42 drives x 300GB)
Up to 32 logical drives
RAID ADG (Advanced Data Guarding)
RAID 5 (Distributed Data Guarding)
RAID 1+0 (Striping & Mirroring)
RAID 0 (Striping)
Cache Memory
Up to 512 MB Read/Write (256 MB modules). If redundant controllers are
used they must have equally configured cache
ECC protection, battery-backed, and removable
Standard as of November 19, 2002: 256 MB cache memory (single
module)
Cache Batteries
Up to three days of redundant battery life, removable for easy replacement
Upgradeable Firmware
2 MB flashable ROM
Disk Drive and Enclosure HP Ultra 320, Ultra3, and Ultra2 SCSI 1-inch Universal drives
Protocol Support
17 x 12.5 x 7.75 in (43.2 x 31.75 x 19.7 cm)
Packaging
Dimensions (L x W x D)
6 lb (2.72 kg)
Weight (Gross)
Modular SAN Array Fibre Connector Type
Channel I/O Module
Number of Fibre Channel
(218960-B21)
Ports
Bandwidth
Operation Modes
Protocols Supported
Packaging
DA - 11033
LC
One 2 Gb Fibre Channel Port using removable Small-Form-FactorPluggable Transceiver (SFP)
200 MB/s
Fibre Channel Class 2 and 3 connectionless service
Fibre Channel
17 x 12.5 x 7.75 in (43.2 x 31.75 x 19.7 cm)
Dimensions (L x W x D)
6 lb (2.72 kg)
Weight (Gross)
Worldwide — Version 23 — August 15, 2005
Page 31
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
QuickSpecs
Technical Specifications
MSA SAN Switch 2/8
(288247-B21)
Performance
Interoperability
Switch bandwidth
Maximum frame size
Port types
Media types
Classes of service
Management access
Management
Security
Supported software
Fabric services
Diagnostics
Dimensions (h x w x d)
Shipping
Humidity range
Environment
Connector Type
Protocol
Data Transfer Method
Maximum Transfer Rate
Packaging
DA - 11033
2.125 Gbit/sec line speed, full duplex ;1.063 Gbit/sec line speed, full
duplex; Auto-sensing of 1 Gbit/sec and 2 Gbit/sec port speeds; optionally
programmable to fixed port speed; Speed matching between 1 Gbit/sec and
2 Gbit/sec ports Aggregate bandwidth 64 Gbit/sec end to end Fabric
latency <2.1 µsec with no contention, cut-through routing at 2 Gbit/sec
SAN Switch 2/8-EL, SAN Switch 2/16-EL, SAN Switch 2/32, SAN Switch
2/64, SAN Switch 8, SAN Switch 16, SAN Switch 8-EL, SAN Switch 16-EL,
Integrated/32, Integrated/64
32 Gbit/sec end to end
2112-byte payload
8 ports universal (one internal, seven external), FL_Port, F_Port, and E_Port;
self-discovery based on switch type (U_Port)
Small form-factor pluggable (SFP) four included standard; short wavelength
(SWL) up to .31 mi (500m), long wavelength (LWL) up to 21 mi ( 35 km);
distance depends on fiber-optic cable and port speed
Class 2, Class 3, Class F (inter-switch frames)
10/100 Ethernet port (RJ-45); Serial port (RS-232)
Advanced Web Tools included; Fabric Manager (optional) Management
access In-band via Management Server.
Fabric security for configuration management, SAN access, and
authentication/authorization
Telnet, SNMP, WEBTOOLS, Zoning, Fabric Watch, Extended Fabrics,
Remote Switch, Trunking, Advanced Performance Monitoring
Simple Name Server, Registered State Change Notification (RSN), Alias
Server (multicast); and Zoning, WEB TOOLS. Optional QuickLoop, Fabric
Watch, Extended Fabrics, and Remote Switch, Trunking, Advanced
Performance Monitoring
Diagnostics POST and embedded online/offline diagnostics
SAN Switch 2/8: 7.75 x 12.5 x 17 in (19.68 x 31.75 x 43.18 cm)
6 lb (2.72.kg)
5% to 85% non-condensing at 104° F (40° C)
32° F to 104° F
Temperature
Operating
(0° C to 40° C)
-31° F to 147° F
Non-operating
(-25° C to 70° C)
0.5 G p-p, 5-500 Hz
Vibration
Operating
2.0 G p-p, 5-500 Hz
Non-operating
LC
SCSI, IP
64-bit/66 MHz PCI
200 MB
11 x 8.5 x 3 in (27.9 x 21.6 x 7.6 cm)
Dimensions (L x W x D)
1 lb (0.45 kg)
Weight (Gross)
Worldwide — Version 23 — August 15, 2005
Page 32
HP StorageWorks Modular Smart Array 1000 QuickSpec
Specific for Intel, AMD and PA-RISC based Servers Only
QuickSpecs
Technical Specifications
Multi-Mode Fibre
Channel Cables Kits
(218960-B21)
Cable Type
Available Cable Lengths
Packaging
LC-LC (2 Gb to 2 Gb connections) and LC-SC (2 Gb to 1 Gb connections)
50 Micron multi-mode Fiber
6.5 ft, 16.4 ft, and 49.2 ft (2 m, 5 m, and 15 m)
11.5 x 9 x 1.5 in (29.2 x 22.8 x 3.8 cm)
Dimensions (L x W x D)
0.75 to 1 lb (0.34 to 0.45 kg)
Weight (Gross)
© Copyright 2001-2005 Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel
Corporation. Unix is a registered trademark of The Open Group.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
DA - 11033
Worldwide — Version 23 — August 15, 2005
Page 33