Mitsubishi Electric TRIUM MONDO Specifications

Table of contents - Windows-CE
• Basic Skills
3 • Pocket Internet Explorer
41
- Today Screen
3
- The Mobile Favorites Folder
41
- Programs
4
- Favorite Links
41
- Navigation Bar and Command Bar
5
- Mobile Favorites
41
- Pop-up Menus
5
- Channels
42
- Notifications
6
- Use Pocket Internet Explorer
43
- Enter Information on Your Mondo
6
- Customize Your Mondo
12
- Power
15
- Adjusting the Backlight
16
- File Explorer
16
- Controlling Volume
17
- Backup and Restore Data
17
• Microsoft ActiveSync
18
• Microsoft Pocket Outlook
19
- Calendar: Scheduling Appointments and
Meetings
19
• Getting Connected
45
- Transfer Items Using Infrared
45
- Connect to an ISP
46
- Connect to Your Network
47
- End a Connection
48
- Connect Directly to an E-mail Server
48
- Get Help on Connecting
49
• Appendix A: Character Recognizer
50
• Appendix B: Troubleshooting
52
- Reset the Mondo and clear memory
52
- Batteries lose power
52
- Contacts: Tracking Friends and
Colleagues
21
- If you forget your password
53
- Tasks: Keeping a To Do List
22
- If you run out of Mondo memory
53
- Notes: Capturing Thoughts and Ideas
23
- Screen freezes or responds slowly
54
- Screen is blank
54
- Screen is dark
54
- Screen is hard to read
54
- Inaccurate response to stylus taps
54
- Inbox: Sending and Receiving E-mail
Messages
• Companion Programs
24
28
- Pocket Word
28
- Pocket Excel
30
- Microsoft Money
32
- Windows Media Player for Pocket PC
35
- Microsoft Reader
37
- Pocket Streets
39
- Slow or no response
54
- Infrared (IR) connection problems
55
- Modem connection problems
55
- Cable and cradle connection problems
56
• Appendix C: Hardware Specifications 57
Microsoft® Windows® Powered Pocket PC
Microsoft, ActiveSync, Outlook, Pocket Outlook, Expedia, AutoRoute Express, MapPoint, Windows, and the Windows logo are
either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Microsoft
products are licensed to OEMs by Microsoft Licensing, Inc., a wholly owned subsidiary of Microsoft Corporation.
Basic Skills
Learning to use your Mondo is easy. This chapter describes the basic concepts
of using and customizing your Mondo.
• Today Screen
When you turn on your Mondo for
the first time each day (or after 4
hours of inactivity), you’ll see the
Today screen.
The Telephone application standby
screen will then be displayed.
You can also display it by tapping
ÿ and then Today. On the Today
screen, you can see at a glance
important information for the day.
You may see the following status
icons on the command bar:
Status Icon
Meaning
Turns all sounds on and off
Backup battery is low
Backup battery is very low
Main batteries are charging
Main batteries are low
Main batteries are very low
External (AC) power source is connected
Dial-up connection is active
Direct connection is active
3
• Programs
You can switch from one program to another by selecting it from the ÿ menu (you can
customize which programs you see on this menu. For information, see "Adjusting Settings",
later in this chapter). To access some programs, you’ll need to tap ÿ, Programs, and
then the program name.
Some programs have abbreviated labels for check boxes and drop-down menus. To see the
full spelling of an abbreviated label, tap and hold the stylus on the label. Drag the stylus off
the label so that the command is not carried out.
You can also switch to some programs by pressing a program button. Your Mondo has
one or more program buttons located on the front or side of the Mondo. The icons on the
buttons identify the programs they switch to.
Item
Icon
Program
1
Microsoft Internet Explorer
2
Microsoft Task
3
Microsoft Note taker
Application 3
Application 1
Application 2
The following table contains a partial list of programs that are on your Mondo. Look
in the Extras folder on the ActiveSync CD for additional programs that you can install
onto your Mondo.
Icon
Program
Description
Calendar
Keep track of your appointments and create meeting requests.
Contacts
Keep track of your friends and colleagues.
Inbox
Send and receive SMS and e-mail messages.
Notes
Create handwritten or typed notes, drawings, and recordings.
Pocket
Excel
Create new workbooks or view and edit Excel workbooks created
on your desktop computer.
Pocket
Word
Create new documents or view and edit Word documents created
on your desktop computer.
4
Icon
Program
Description
Infrared
Receive
Receive information from another Windows-powered device.
Internet
Explorer
View Web pages downloaded from your computer or connect to
an ISP and browse the Web.
Microsoft
Money
Enter and view transactions and check on your account balances.
Microsoft
Reader
Read or listen to (using Audible) electronic books.
Tasks
Keep track of your tasks.
• Navigation Bar and Command Bar
The navigation bar is located at the top of the screen. It displays the active program and
current time, and allows you to switch to programs and close screens.
Use the command bar at the bottom
of the screen to perform tasks in
programs. The command bar includes menu names, buttons, and the
input panel button. To create a
new item in the current program,
tap New. To see the name of a
button, tap and hold the stylus on
the button. Drag the stylus off the
button so that the command is not
carried out.
• Pop-up Menus
With pop-up menus, you can quickly choose an action for an item. For example, you
can use the pop-up menu in the contact list to quickly delete a contact, make a copy
of a contact, or send an e-mail message to a contact. The actions in the pop-up menus
vary from program to program.
5
To access a pop-up menu, tap
and hold the stylus on the item
name that you want to perform
the action on. When the menu
appears, lift the stylus, and tap the
action you want to perform. Or
tap anywhere outside the menu
to close the menu without performing an action.
• Notifications
Your Mondo reminds you in a variety of ways when you have something to do. For example,
if you’ve set up an appointment in Calendar, a task with a due date in Tasks, or an alarm in
Clock, you’ll be notified in any of the following ways:
• A message box appears on the screen.
• A sound, which you can specify, is played.
• A light flashes on your Mondo.
To choose reminder types and sounds for your Mondo, tap ÿ and then Settings. In the
Personal tab, tap Sounds & Reminders. The options you choose here apply throughout
the Mondo.
• Enter Information on Your Mondo
You have several options for entering new information:
• Use the input panel to enter typed text, either by using the soft keyboard or Character
Recognizer.
• Write directly on the screen.
• Draw pictures on the screen.
• Speak into your Mondo microphone to record a message.
• Use ActiveSync to synchronize or copy information from your desktop computer to your
Mondo. For more information on ActiveSync, see the booklet accompanying the
ActiveSync CD or ActiveSync Help on your desktop computer.
6
• Typing Using the Input Panel
Use the input panel to enter information in any program on your Mondo. You can either
type using the soft keyboard or write using Character Recognizer. In either case, the
characters appear as typed text on the screen.
To show or hide the input panel,
tap the Input Panel button. Tap
the arrow next to the Input Panel
button to see your choices.
When you use the input panel, your
Mondo anticipates the word you are
typing or writing and displays it above
the input panel. When you tap the
displayed word, it is inserted into
your text at the insertion point. The
more you use your Mondo, the more
words it learns to anticipate.
To change word suggestion options,
such as the number of words suggested at one time, tap ÿ, Settings,
Personal tab, Input, and then the
Word Completion tab.
• To type with the soft keyboard:
1- Tap the arrow next to the Input Panel button and then Keyboard.
2- On the soft keyboard that is displayed, tap the keys with your stylus.
• To use Character Recognizer:
1- Tap the arrow next to the Input Panel button and then Character Recognizer.
2- Write a letter in the box.
When you write a letter, it is converted to typed text that appears on the screen. For
specific instructions on using Character Recognizer, see Appendix A.
• To select typed text:
If you want to edit or format typed text, you must select it first.
- Drag the stylus across the text you want to select.
You can cut, copy, and paste text by tapping and holding the selected words and
then tapping an editing command on the pop-up menu, or by tapping the command
on the Edit menu.
7
• Writing on the Screen:
In any program that accepts writing, such as the Notes program and the Notes tab in
Calendar, Contacts, and Tasks, you can use your stylus to write directly on the screen.
Write the way you do on paper. You can edit and format what you’ve written and
convert the information to text at a later time.
- To write on the screen:
Tap the Pen button to switch to writing mode.
This action displays lines on the screen to help
you write.
Some programs that accept writing may not
have the Pen button. See the documentation
for that program to find out how to switch to
writing mode.
- To select writing:
If you want to edit or format writing, you must select it first.
1- Tap and hold the stylus next to the text you want to select until the insertion
point appears.
2- Without lifting, drag the stylus across the text you want to select.
If you accidentally write on the screen, tap Tools and then Undo and try again.
You can also select text by tapping the Pen button to deselect it and then
dragging the stylus across the screen.
You can cut, copy, and paste written text in the same way you work with typed
text: tap and hold the selected words and then tap an editing command on the
pop-up menu, or tap the command on the Edit menu.
- To convert writing to text:
Tap Tools and then Recognize.
If you want to convert only certain words, select them before tapping Recognize
on the Tools menu (or tap and hold the selected words and then tap Recognize
on the pop-up menu). If a word is not recognized, it is left as writing.
8
If the conversion is incorrect, you can select different words from a list of
alternates or return to the original writing. To do so, tap and hold the incorrect
word (tap one word at a time). On the pop-up menu, tap Alternates. A menu
with a list of alternate words appears. Tap the word you want to use, or tap the
writing at the top of the menu to return to the original writing.
Tips for getting good recognition:
• Write neatly.
• Write on the lines and
draw descenders below the line. Write
the cross of the "t"
and apostrophes below the top line so
that they are not confused with the word
above. Write periods
and commas above
the line.
• For better recognition,
try increasing the
zoom level to 300%
using
the
Tools
menu.
9
• Write the letters of a word closely and leave big gaps between words so that
the Mondo can easily tell where words begin and end.
• Hyphenated words, foreign words that use special characters such as accents,
and some punctuation cannot be converted.
• If you add writing to a word to change it (such as changing a "3" to an "8") after
you attempt to recognize the word, the writing you add will not be included if
you attempt to recognize the writing again.
• Drawing on the Screen:
You can draw on the screen in the same way that you write on the screen. The
difference between writing and drawing on the screen is how you select items
and how they can be edited. For example, selected drawings can be resized, while
writing cannot.
- To create a drawing:
Cross three ruled lines on
your first stroke. A drawing
box appears. Subsequent
strokes in or touching the
drawing box become part
of the drawing. Drawings
that do not cross three
ruled lines will be treated
as writing.
You may want to change
the zoom level so that you
can more easily work on
or view your drawing. Tap
Tools and then a zoom
level.
- To select a drawing:
If you want to edit or format a drawing, you must select it first.
• Tap and hold the stylus on the drawing until the selection handle appears.
To select multiple drawings, deselect the Pen button and then drag to select
the drawings you want.
You can cut, copy, and paste selected drawings by tapping and holding the
selected drawing and then tapping an editing command on the pop-up menu, or
by tapping the command on the Edit menu. To resize a drawing, make sure the
Pen button is not selected and drag a selection handle.
10
• Recording a Message:
In any program where you can write or draw on the screen, you can also quickly capture
thoughts, reminders, and phone numbers by recording a message. In Calendar, Tasks,
and Contacts, you can include a recording in the Notes tab. In the Notes program, you
can either create a stand-alone recording or include a recording in a written note. If you
want to include the recording in a note, open the note first.
- To create a recording:
1- Hold your Mondo’s microphone near your mouth or other source of sound.
2- Press and hold the Record
hardware button on your
Mondo until you hear a
beep.
3- While holding down the
Record button, make your
recording.
4- To stop recording, release the
Record button. Two beeps
will sound. The new recording appears in the note list
or as an embedded icon.
You can also make a recording
by tapping the Record button
on the Recording toolbar.
To play a recording, tap it in
the list or tap its icon in the
note.
• Find and Organize Information:
The Find feature on your Mondo helps you quickly locate information.
On the ÿ menu, tap Find. Enter the text you want to find, select a data type, and
then tap Go to start the search.
To quickly find information that is taking up storage space on your Mondo, select
Larger than 64 KB in Type.
You can also use the File Explorer to find files on your Mondo and to organize these files
into folders. On the ÿ menu, tap Programs, and then File Explorer.
11
You can move files in File Explorer by
tapping and holding the item you want
to move and then tapping Cut or Copy
and Paste on the pop-up menu.
• Customize your Mondo
You can customize your Mondo by adjusting Mondo settings and installing additional
software.
• Adjusting Settings
You can adjust Mondo settings to suit the way you work. To see available options,
tap ÿ, Settings, then the Personal, System or Connections tab located at the
bottom of the screen.
You might wish to do the following:
Item
Align Screen
Backlight
Buttons
Description
Adjust the touch screen if it is not responding accurately.
Set the length of time before the backlight turns off when the Mondo is idle.
Associate program buttons with specific programs and adjust the up/down control
of the jog wheel.
Clock
Change the time or set alarms.
Input
Customize the input method and set word completion settings.
Memory
Menus
Owner Information
Password
Power
Adjust the allocation of storage and program memory.
Customize what appears on the menu and enable a pop-up menu from the New
button.
Enter your contact information.
Limits access to your Mondo.
Maximize battery life.
12
• Setting a Password
Password security is provided to help protect against unauthorized use of your Mondo.
For immediate protection, we recommend setting up password security through the
Password utility in the Settings of your Mondo as soon as possible. If set, your login
password must be entered each time you turn on your Mondo.
Choose a password that's easy to remember. If you forget it, you must perform a
full reset to use your Mondo again. A full reset restarts your Mondo and removes
all infor-mation that was stored in memory, such as your data files and your system
settings.
To set your login password, follow these steps:
• Tap ÿ, Settings, then Password.
• Enter a new 4-digit PIN. This number is now your password.
• Enable the Mondo password by checking the Require password when Mondo
is turned on box.
• Save your new settings by tapping OK.
Your login password is now set. The login password screen appears each time you
turn on your Mondo.
• Adjusting Settings
You can adjust Mondo settings to suit the way you work. To see available options, tap ÿ,
Settings, then the Personal or System tab located at the bottom of the screen.
You might want to adjust the following:
• Clock, to change the time or to set alarms
• Menus, to customize what appears on the ÿ,menu and to enable a pop-up menu
from the New button
• Owner Information, to enter your contact information
• Password, to limit access to your Mondo
• Power, to maximize battery life
• Today, to customize the information that is displayed on the Today screen.
• Adding or Removing Programs
Programs added to your Mondo at the factory are stored in ROM (read-only memory).
You cannot remove or modify this software, and you’ll never accidentally lose ROM
contents. Programs and data files added to your Mondo after factory installation are
stored in RAM (random access memory). You can install any program created for
Mondo, as long as your Mondo has enough memory. The most popular place to find
software for your Mondo is on the World Wide Web.
13
- To add programs:
You’ll need to install the appropriate software for your Mondo on your desktop
computer before installing it on your Mondo.
1- Determine your Mondo and processor type so that you know which version
of the software to install. Tap ÿ and then Settings. On the System tab, tap
About. In the Version tab, make a note of the information in Processor.
2- Download the program to your desktop computer (or insert the CD or disk
that contains the program into your desktop computer). You may see a single
*.exe file, a *.zip file, a Setup.exe file, or several versions of files for different
device types and processors. Be sure to select the program designed for
Mondo and your Mondo processor type.
3- Read any installation instructions, Read Me files, or documentation that comes
with the program. Many programs provide special installation instructions.
4- Connect your Mondo and desktop computer.
5- Double-click the *.exe file.
• If the file is an installer, the installation wizard will begin. Follow the
directions on the screen. Once the software has been installed on your
desktop computer, the installer will automatically transfer the software to
your Mondo.
• If the file is not an installer, you will see an error message stating that the
program is valid but it is designed for a different type of computer. You will
need to move this file to your Mondo. If you cannot find any installation
instructions for the program in the Read Me file or documentation, use
ActiveSync Explore to copy the program file to the Program Files folder on
your Mondo. For more information on copying files using ActiveSync, see
ActiveSync Help.
Once installation is complete, tap ÿ, Programs, and then the program icon
to switch to it.
- To add a program to the Start menu:
Tap ÿ, Settings, Menus, the Start Menu tab, and then the check box for the
program. If you do not see the program listed, you can either use File Explorer
on your Mondo to move the program to the Start Menu folder or use ActiveSync
on the desktop computer to create a shortcut to the program and place the
shortcut in the Start Menu folder.
• Using File Explorer on the Mondo: Tap ÿ, Programs, File Explorer, and
locate the program (tap the folder list, labeled My Documents by default,
and then My Device to see a list of all folders on Mondo). Tap and hold
the program and tap Cut on the pop-up menu. Open the Start Menu folder
located in the Windows folder, tap and hold a blank area of the window,
and tap Paste on the pop-up menu. The program will now appear on the ÿ
menu. For more information on using File Explorer, see "Find and Organize
Information," earlier in this chapter.
14
• Using ActiveSync on the desktop computer: Use the Explorer in ActiveSync
to explore your Mondo files and locate the program. Right-click the program,
and then click Create Shortcut. Move the shortcut to the Start Menu folder
in the Windows folder. The shortcut now appears on the ÿ menu. For more
information, see ActiveSync Help.
- To remove programs:
Tap ÿ and then Settings. On the System tab, tap Remove Programs.
If the program does not appear in the list of installed programs, use File Explorer
on your Mondo to locate the program, tap and hold the program, and then tap
Delete on the pop-up menu.
• Power
When you are working with your Mondo and using battery power, you can monitor the
charge held in the battery by using the Power window. To conserve battery power, your
Mondo automatically powers off whenever it is idle for a continuous period of time. If you
are running on battery power, you can conserve charge if you shorten the idle time before
your Mondo automatically powers off.
- To display the Power control panel:
• Tap ÿ, Settings, System, then Power.
• If the battery is low on charge, the battery
icon appears on the command bar on the Today
screen. Tap the battery icon to display the
Power control panel.
• If the battery gets very low, your Mondo displays a warning message. If this occurs, save
any unsaved data you are working on, perform
a synchronization with your com-puter, then
turn off your Mondo. Don’t try to restart your
Mondo until you have connected to external
power. If your Mondo shuts down, you still
have about 24 hours to recharge the battery
before you lose the data on your Mondo.
The Power control panel only shows the battery
charge level if you are using the battery. If you
have connected the AC adapter, the window
shows the recharging status.
- To set the power off timer:
• Tap ÿ, Settings, System, then Power.
• Use the drop down menus to set the idle intervals before your Mondo automatically
powers off.
15
• If you are playing an audio file on your Mondo under battery power, the display will
automatically turn off after one minute if there has been no input to your Mondo.
The display will turn back on once the audio file has finished playing. This power
saving fea-ture is not adjustable.
• Adjusting the Backlight
Mondo features a built-in backlight that allows you
to view text and graphics clearly whether you're
indoors or outdoors, in a dim study or at a brightly
lit worksite.
To turn on or off the backlight press and hold the
Power button for one second.
- To adjust the backlight time-out:
Use the drop-down menus to set the amount
of idle time before the backlight turns off when
your Mondo is using battery power and external
power.
• File Explorer
You can use the File Explorer to
find files on your Mondo and to
organize these files into folders.
Press the Programs button, then
tap File Explorer.
16
• Controlling Volume
The Volume utility provides an easy way to adjust
the volume of your Mondo.Press the Settings button,
then tap Volume.
or
- Tap ÿ, Settings, System, then Sounds &
Reminders.
- Adjust the volume level on the slider.
- Tap OK to save the new setting.
• Backup and Restore Data
To avoid losing your data in the event that your Mondo is lost, stolen, or becomes defective,
we recommends periodic backups to the your computer’s hard drive. Depending on your
usage, you may want to perform a backup as often as once a day. You can back up and
restore your Mondo 's data using the following utility:
• ActiveSync Backup/Restore. Use this ActiveSync utility to periodically back up your
Mondo 's data onto your computer’s hard drive. You can manually back up data or
set this utility to back up automatically each time you connect to your Pocket PC. For
more information, see ActiveSync Help on your computer.
17
Microsoft ActiveSync
Using Microsoft ActiveSync, you can synchronize the information on your desktop computer
with the information on your Mondo. Synchronization compares the data on your Mondo
with your desktop computer and updates both computers with the most recent information.
For example:
• Keep Pocket Outlook data up-to-date by synchronizing your Mondo with your choice
of Microsoft Outlook, Microsoft Schedule+, or Microsoft Exchange on your desktop
computer.
• Synchronize Microsoft Word and Microsoft Excel documents between your Mondo and
desktop computer. Your files are automatically converted to the correct format.
By default, ActiveSync does not automatically synchronize all types of information, for
example, e-mail messages. Use ActiveSync options to turn synchronization on and off for
specific information types.
With ActiveSync, you can also:
• Back up and restore your Mondo data.
• Copy (rather than synchronize) files between your Mondo and desktop computer.
• Control when synchronization occurs by selecting a synchronization mode. For example,
you can synchronize continually while the Mondo is in the cradle or only when you
choose the synchronize command.
• Select which information types are synchronized and control how much data is
synchronized. For example, you can choose how many weeks of past appointments
you want synchronized.
For information on installing ActiveSync, see the booklet accompanying the ActiveSync CD.
For information on using ActiveSync, see ActiveSync Help on the desktop computer.
18
Microsoft Pocket Outlook
Microsoft Pocket Outlook® includes Calendar, Contacts, Tasks, Inbox, and Notes. You
can use these programs individually or together. For example, e-mail addresses stored in
Contacts can be used to address e-mail messages in Inbox.
Using ActiveSync, you can synchronize information in Microsoft Outlook, Microsoft
Schedule+, or Microsoft Exchange on your desktop computer with your Mondo. Each time
you synchronize, ActiveSync compares the changes you made on your Mondo and desktop
computer and updates both computers with the latest information. For information on using
ActiveSync, see ActiveSync Help on the desktop computer.
You can switch to any of these programs by tapping them on the ÿ menu.
• Calendar: Scheduling Appointments and Meetings
Use Calendar to schedule appointments, including meetings and other events. You can
check your appointments in one of several
views (Agenda, Day, Week, Month, and Year)
and easily switch views by using the View
menu.
You can customize the Calendar display, such
as changing the first day of the week, by
tapping Options on the Tools menu.
- To create an appointment:
1- If you are in Day or Week view, tap the desired date and time for the
appointment.
2- Tap New.
3- Using the input panel, enter a description and a location. Tap first to select the
field.
4- If needed, tap the date and time to change them.
5- Enter other desired information. You will need to hide the input panel to see all
available fields.
6- To add notes, tap the Notes tab. You can enter text, draw, or create a recording.
For more information on creating notes, see "Notes: Capturing Thoughts and
Ideas", later in this chapter.
7- When finished, tap OK to return to the calendar.
19
If you select Remind me in an appointment,
your Mondo will remind you according to
the options set in ÿ, Settings, Personal
tab, Sounds & Reminders.
- Using the Summary Screen:
When you tap an appointment in Calendar,
a summary screen is displayed. Tap the
top portion of the summary screen to
change the appointment.
- Creating Meeting Requests:
You can use Calendar to set up meetings with users of Outlook, Pocket Outlook, or
Schedule+. The meeting notice will be created automatically and sent either when
you synchronize Inbox or when you connect to your e-mail server. Indicate how
you want meeting requests sent by tapping Tools and then Options. If you send
and receive e-mail messages through ActiveSync, select ActiveSync.
To schedule a meeting:
1- Create an appointment.
2- In the appointment details, hide the input panel, and then tap Attendees.
3- From the list of e-mail addresses you’ve entered in Contacts, select the meeting
attendees.
The meeting notice is created automatically and placed in the Outbox folder.
For more information on sending and receiving meeting requests, see Calendar
Help and Inbox Help on the Mondo.
20
• Contacts: Tracking Friends and Colleagues
Contacts maintains a list of your friends
and colleagues so that you can easily
find the information you’re looking for,
whether you’re at home or on the road.
Using the Mondo infrared (IR) port, you
can quickly share Contacts information
with other Windows-powered device
users.
To change the way information is displayed in the list, tap Tools and then
Options.
- To create a contact:
1- Tap New.
2- Using the input panel, enter a
name and other contact information. You will need to scroll down
to see all available fields.
- Using the Summary Screen:
When you tap a contact in the
contact list, a summary screen is
displayed.
21
3- To assign the contact to a category,
scroll to and tap Categories and
select a category from the list. In the
contact list, you can display contacts
by category.
4- To add notes, tap the Notes tab.
You can enter text, draw, or create a recording. For more information on creating notes, see
"Notes: Capturing Thoughts and
Ideas," later in this chapter.
5- When finished, tap OK to return to
the contact list.
• Tasks: Keeping a To Do List
Use Tasks to keep track of what you have to do. In the task list, overdue tasks are displayed
in bold (and in red on color devices).
To change the way information is displayed in the list, tap Tools and then
Options.
- To create a task:
1- Tap New.
2- Using the input panel, enter a
description.
3- You can enter a start date and
due date or enter other information by first tapping the
field. If the input panel is
open, you will need to hide it
to see all available fields.
4- To assign the task to a category, tap Categories and
select a category from the list.
In the task list, you can display
tasks by category.
5- To add notes, tap the Notes
tab. You can enter text, draw,
or create a recording. For
more information on creating
notes, see "Notes: Capturing Thoughts and Ideas", later in this chapter.
6- When finished, tap OK to return to the task list.
To quickly create a task with only a subject, tap Entry Bar on the Tools menu. Then, tap
Tap here to add a new task and enter your task information.
22
- Using the Summary Screen:
When you tap a task
in the task list, a summary screen is displayed.
• Notes: Capturing Thoughts and Ideas
Quickly capture thoughts, reminders, ideas, drawings, and phone numbers with Notes. You
can create a written note or a recording. You can also include a recording in a note. If a note
is open when you create the recording, it will be included in the note as an icon. If the note
list is displayed, it will be created as a stand-alone recording.
23
- To create a note:
1- Tap New.
2- Create your note by writing, drawing, typing, and
recording.
• Inbox: Sending and Receiving E-mail Messages
Use Inbox to send and receive e-mail messages in either of these ways:
- Synchronize e-mail messages with Microsoft Exchange or Microsoft Outlook on your
desktop computer.
- Send and receive e-mail messages by connecting directly to an e-mail server through an
Internet service provider (ISP) or a network.
Please refer to the online help for further details on sending and receiving SMS messages.
- Synchronizing E-mail Messages
E-mail messages can be synchronized as part of the general synchronization
process. First, you’ll need to enable Inbox synchronization in ActiveSync options.
For information on enabling Inbox synchronization, see ActiveSync Help on the
desktop computer.
During synchronization:
• E-mail messages are copied from the Inbox folder of Exchange or Outlook
on your desktop computer to the Inbox folder on your Mondo. The e-mail
messages on the two computers are linked, so when you delete an e-mail
message on your Mondo, it’s also deleted from your desktop computer the
next time you synchronize.
• E-mail messages in the Outbox folder on your Mondo are transferred to Exchange
or Outlook, and then sent from those programs.
You can also synchronize e-mail messages with your desktop computer from a
remote location.
24
- Connecting Directly to an E-mail Server
In addition to synchronizing e-mail messages with your desktop computer, you
can send and receive e-mail messages by connecting to an e-mail server using a
modem or network card connected to your Mondo. You’ll need to set up a remote
connection to a network or an ISP, and a connection to your e-mail server.
When you connect to the e-mail server, new messages are downloaded to
the Mondo Inbox folder, messages in the Mondo Outbox folder are sent, and
messages that have been deleted on the e-mail server are removed from the
Mondo Inbox.
Messages that you receive directly from an e-mail server are linked to your e-mail
server rather than your desktop computer. When you delete a message on your
Mondo, it’s also deleted from the e-mail server the next time you connect.
You can work online or offline. When working online, you read and respond to
messages while connected to the e-mail server. Messages are sent as soon as
you tap Send, which saves space on your Mondo.
When working offline, once you’ve downloaded new message headers or partial
messages, you can disconnect from the e-mail server and then decide which
messages to download completely. The next time you connect, Inbox downloads
the complete messages you’ve marked for retrieval and sends the messages
you’ve composed.
- Using the Message List
Messages you receive are displayed in the message list. By
default, the most recently received messages are displayed first
in the list.
When you receive a message, tap
it in the list to open it. Unread
messages are displayed in bold
When you connect to your e-mail
server or synchronize with your
desktop computer, Inbox downloads only the first 100 lines of
each new message by default. No
e-mail attachments are downloaded. The original messages remain
on the e-mail server or your desktop computer.
You can mark the messages that
you want to retrieve in their entirety the next time you synchronize or connect to your e-mail server. In the message list, tap and hold the message
you want to retrieve. On the pop-up menu, tap Get Full Copy. The icons in the
Inbox message list give you visual indications of message status.
25
You’ll need to download a full message
before you can view its attachments.
Attachments appear as icons in a window pane at the bottom of the message. Tapping an attachment icon opens
the attachment if it has been fully
downloaded or marks it for download
the next time you synchronize or connect to your e-mail server.
You specify your downloading preferences when you set up the service
or select your synchronization options.
You can change them at any time:
• Change options for Inbox
synchronization using ActiveSync
options. For more information, see
ActiveSync Help.
• Change options for direct e-mail server connections in Inbox on your Mondo.
Tap Tools and then tap Options. On the Service tab, tap the service you want
to change.
- Composing E-mail Messages
To compose an e-mail message:
1- Tap New.
2- Enter an e-mail address in To, or
select a name from the contact list
by tapping the Address Book button. All e-mail addresses entered in
the e-mail fields in Contacts appear
in the Address Book.
3- Compose your message.
4- Tap Send when you’ve finished the
message.
The message is placed in the Outbox
folder on your Mondo and will be
delivered in one of two ways:
• They are transferred to the Outbox
folder in Exchange or Outlook on
your desktop computer and sent the
next time you synchronize.
• They are transferred to your e-mail server the next time you connect. In Inbox,
make sure the appropriate service is selected on the Services menu. Then tap
the Connect button (or Connect on the Services menu).
Please refer to the online help for further details on sending and receiving SMS
messages.
26
- Managing E-mail Messages and Folders
By default, messages are displayed in one of four folders for each service you’ve
created: Inbox, Deleted (local), Outbox, and Sent. The Deleted folder contains
messages that have been deleted on the Mondo. If you are using IMAP4, you
may see a Deleted Items folder. This folder is for messages deleted on the e-mail
server. The behavior of the Deleted and Sent folders depends on the options you
have chosen. In the message list, tap Tools and then Options. On the Message
tab, select your options.
If you want to organize messages into additional folders, tap Tools, and then
New Folder to create new folders. To move or copy a message to another folder,
in the message list, tap and hold the message and then tap Move to or Copy
to on the pop-up menu.
- Folder behavior with ActiveSync
If you move e-mail messages into a folder you create, the link is broken between
these e-mail messages and their copies on the desktop computer. When you
synchronize next, the e-mail messages in the folder you created will not be
synchronized. In addition, e-mail messages that are missing from the Mondo Inbox
folder will be deleted from the Inbox folder on the desktop computer so that both
Inbox folders match. This prevents you from getting duplicate copies of an e-mail
message, but it also means that you will no longer have access to the e-mail
messages you move out of Inbox except from the Mondo.
- Folder behavior with a direct connection to an e-mail server
The behavior of the folders you create depends on whether you are using POP3
or IMAP4:
• If you are using POP3, folders will behave like they do when using ActiveSync.
• If you are using IMAP4, the folders you create and the messages you move are
mirrored on the e-mail server. For example, if you move two messages from
the Inbox folder to a folder called Family, the e-mail server will create a copy of
the Family folder and move the messages into that folder. Therefore, messages
are available to you anytime you connect to your e-mail server, whether it is
from your Mondo, laptop computer, or desktop computer. This synchronization
of folders occurs when you create a new folder, move e-mail messages into a
folder, or tap Synchronize Folders on the Services menu. If you want to view
the messages in a folder while disconnected from your e-mail server, select
the folder and then tap Folder Available Offline on the Services menu. This
downloads the e-mail message in the folder to your Mondo.
27
Companion Programs
The companion programs consist of Microsoft Pocket Word, Microsoft Pocket Excel,
Microsoft Money, Windows Media Player for Pocket PC, Microsoft Reader, and Microsoft
Pocket Streets.
To switch to a companion program on your Mondo, tap Programs on the ÿ menu, and
then tap the program name.
• Pocket Word
Pocket Word works with Microsoft Word on your desktop computer to give you easy
access to copies of your documents. You can create new documents on your Mondo,
or you can copy documents from your desktop computer to your Mondo. Synchronize
documents between your desktop computer and your Mondo so that you have the most
up-to-date content in both locations.
Use Pocket Word to create documents, such as letters, meeting
minutes, and trip reports. To
create a new file, tap ÿ,
Programs, Pocket Word, and
then New. A blank document
appears. Or, if you’ve selected
a template for new documents
in the Options dialog box, that
template appears with appropriate text and formatting already provided. You can open only
one document at a time; when
you open a second document,
you’ll be asked to save the first.
You can save a document you
create or edit in a variety of
formats, including Pocket Word
(.psw), Rich Text Format (.rtf),
and Plain Text (.txt).
Pocket Word contains a list of the files stored on your Mondo. Tap a file in the list to open
it. To delete, make copies of, and send files, tap and hold a file in the list. Then, select the
appropriate action on the pop-up menu.
You can enter information in Pocket Word in one of four modes (writing, drawing,
typing, and recording), which are displayed on the View menu. Each mode has its own
toolbar, which you can show and hide by tapping the Show/Hide Toolbar button on
the command bar.
You can change the zoom magnification by tapping View and then Zoom. Then select
the percentage you want. Select a higher percentage to enter text and a lower one to
see more of your document.
If you’re opening a Word document created on a desktop computer, select Wrap to
Window on the View menu so that you can see the entire document.
28
- Typing Mode
Using the input panel, enter
typed text into the document.
To format existing text and to
edit text, first select the text.
You can select text as you do in
a Word document, using your
stylus instead of the mouse to
drag through the text you want
to select. You can search a
document to find the text you
want by tapping Edit and then
Find/Replace.
- Writing Mode
In writing mode, use your stylus to write directly on the screen. Ruled lines are
displayed as a guide, and the zoom magnification is greater than in typing mode
to allow you to write more easily.
If you cross three ruled
lines in a single stylus
stroke, the writing becomes a drawing, and can
be edited and manipulated as described in the
following section.
Written words are converted to graphics (metafiles) when a Pocket Word
document is converted to
a Word document on your
desktop computer.
29
- Drawing Mode
In drawing mode, use your stylus
to draw on the screen. Gridlines
appear a guide. When you lift your
stylus off the screen after the
first stroke, you’ll see a drawing
box indicating the boundaries of
the drawing. Every subsequent
stroke within or touching the
drawing box becomes part of the
drawing.
- Recording Mode
In recording mode, embed a recording into your document. Recordings are saved
as .wav files.
For more information on using Pocket Word, tap ÿ and then Help.
• Pocket Excel
Pocket Excel works with Microsoft Excel on your desktop computer to give you easy
access to copies of your workbooks. You can create new workbooks on your Mondo,
or you can copy workbooks from your desktop computer to your Mondo. Synchronize
workbooks between your desktop computer and your Mondo so that you have the most
up-to-date content in both locations.
Use Pocket Excel to create workbooks, such as expense reports and mileage logs. To
create a new file, tap ÿ, Programs, Pocket Excel, and then New. A blank workbook
appears. Or, if you’ve selected a template for new workbooks in the Options dialog box,
that template appears with appropriate text and formatting already provided. You can open
only one workbook at a time; when you open a second workbook, you’ll be asked to save
the first. You can save a workbook you create or edit in a variety of formats, including
Pocket Excel (.pxl) and Excel (.xls).
Pocket Excel contains a list of the files stored on your Mondo. Tap a file in the list to open
it. To delete, make copies of, and send files, tap and hold a file in the list. Then select the
appropriate action from the pop-up menu.
Pocket Excel provides fundamental spreadsheet tools, such as formulas, functions, sorting,
and filtering. To display the toolbar, tap View and then Toolbar.
30
If your workbook contains sensitive information, you can protect it with a password. To do
so, open the workbook, tap Edit, and then Password. Every time you open the workbook,
you will need to enter the password, so choose one that is easy for you to remember
but hard for others to guess.
- Tips for Working in Pocket Excel
Note the following when working in large worksheets in Pocket Excel:
• View in full-screen mode to see as much of your worksheet as possible. Tap
View and then Full Screen. To exit full-screen mode, tap Restore.
• Show and hide window elements. Tap View and then tap the elements you
want to show or hide.
• Freeze panes on a worksheet. First select the cell where you want to freeze
panes. Tap View and then Freeze Panes. You might want to freeze the top
and leftmost panes in a worksheet to keep row and column labels visible as
you scroll through a sheet.
• Split panes to view different areas of a large worksheet. Tap View and then
Split. Then drag the split bar to where you want it. To remove the split, tap
View and then Remove Split.
• Show and hide rows and columns. To hide a hidden row or column, select a cell
in the row or column you want to hide. Then tap Format, then Row or Column,
then Hide. To show a hidden row or column, tap Tools, then Go To, and then
type a reference that is in the hidden row or column. Then tap Format, then
Row or Column, and then Unhide.
For more information on using Pocket Excel, tap ÿ and then Help.
31
• Microsoft Money
Use Microsoft Money to easily enter and view your financial transactions, check your account
balances, and track your investments. If you are using Microsoft Money on your desktop
computer, you should synchronize first so that you won’t have to enter your accounts and other
required information on your Mondo by hand. Before you can synchronize, you will need to run the
Setup program found in the MSMoney folder under Extras on the ActiveSync CD. The first time
you synchronize, all Microsoft Money information on the Mondo will be replaced with information
from your desktop computer. If you do not use Microsoft Money on your desktop computer,
Microsoft Money on the Mondo can still be used to help organize your finances, but you will not
be able to synchronize the financial information with your desktop computer.
- Installing Microsoft Money
Microsoft Money is included in the Extras folder on the ActiveSync CD. To install
Microsoft Money on your Mondo, go to the MSMoney folder under Extras on the
ActiveSync CD, and follow the instructions in the Read Me file.
- Creating Accounts
To create a new account, tap ÿ, Programs, Microsoft Money, and then New. A
screen for entering account details with a Required and an Optional tab appears.
Enter the name and type of the account on the Required tab and the other
information you want to record on the Optional tab and then tap OK. The name of
the account appears in the Account Manager with its opening balance. The total of
all balances for your accounts appears at the bottom of the screen.
Microsoft Money shows that you are in the Account Manager in the upper-left
corner of the screen. To navigate within Microsoft Money, tap the name Account
Manager. A list of the five screens within Microsoft Money appears. Tap the
screen you want to see.
32
- Using the Account Register
To view the Account Register for an account, tap it in
the Account Manager. The
Account Register displays all
transactions for that account
that are stored on your
Mondo. For each transaction,
you will see the date, the
payee, the amount, and the
running balance of your
account as a result of the transaction. The ending account
balance is displayed at the
bottom of the screen.
To switch between accounts,
tap the name of the current
account in the upper-right
corner and select another
account from the list.
- Entering Transactions
Once you have the Account Register open, tap New to create a new transaction.
On the Required tab, Microsoft
Money automatically creates a
withdrawal and enters today’s
date. If you are not entering a
withdrawal, tap the Type box and
select Deposit or Transfer. You
can also change the account in
which the transaction is being
created. Then, tap the Payee box.
Using the input panel, enter the
payee for your transaction. As
you type, Microsoft Money tries
to guess the payee that you are
entering from your list of existing payees. If Microsoft Money
guesses correctly, tap another
field or tap Tab to accept the
payee.
When you accept a payee, Microsoft Money enters the same amount, category,
and subcategory that you used for the last transaction with that same payee.
This information gets entered on the Required tab and the Optional tab. This
AutoComplete+ feature helps you quickly enter similar transactions, such as ATM
withdrawals. If AutoComplete+ has entered the wrong information, use the input
panel to correct it.
33
If you do not want Microsoft Money to automatically enter information, tap Tools and
then Options and turn off AutoComplete+.
- Entering and Tracking Investments
In the Investments screen, you can track the value of the investments in your
portfolio. The Investments screen displays each investment with the current
number of shares, their price, and market value. The total market value for all of
your investments is displayed at the bottom of the screen.
To create a new investment, tap New. On the new investment screen, enter
the name, symbol, current price, and number of shares. Tap OK to save the
new investment.
Microsoft Money can update investment prices from the MoneyCentral Web site.
To do this, open a connection to the Internet and tap Update Investments on
the Tools menu. When the update is complete, Microsoft Money will record the
date and time and display it after Last Quote Update at the bottom of the screen.
If you do not have an Internet connection from your Mondo, you can manually
update the investment prices by tapping the investment and entering a new price
with the input panel.
Microsoft Money can get a quote update over any direct (IP) Internet connection,
including a wireless connection or network connection. If you cannot get a quote
update, check with your Internet service provider (ISP) or network administrator to
see if you require a proxy server to connect to the Internet. If so, tap Tools and then
Options and set up the proxy server.
For more information on using Microsoft Money, tap ÿ and then Help.
34
• Windows Media Player for Pocket PC
Use Windows Media Player for Pocket PC to listen to digital audio files.
To switch to Windows Media Player, tap
ÿ, Programs, and then Windows Media
Player.
- Using Windows Media Manager for Pocket PC
Use Windows Media Manager for Pocket PC on the desktop computer to create
digital audio files in Windows Media format and to transfer audio content to your
Mondo or storage card. With Windows Media format, you can create high-quality
audio for your Mondo without using large amounts of Mondo memory.
35
You can transfer the following media formats to your Mondo for use with the
Windows Media Player: ASF (Advanced Streaming Format), WMA (Windows Media
Audio), MP3 (MPEG Audio Layer 3), and WAV (waveform).
Windows Media Manager is included in the Extras folder on the ActiveSync CD.
You must install Windows Media Manager on your desktop computer to copy
and convert digital audio files.
- What is Packaged Content?
Packaged content is digital music that has been encrypted for distribution to
prevent unauthorized access to copyrighted content. Windows Media Player for
Pocket PC cannot play packaged content without a valid license. First use Windows
Media Player on the desktop computer to obtain packaged content that has a
license that allows transferring the content to your Mondo. Then use Windows
Media Manager for Pocket PC to transfer the packaged content and its license
to your Mondo or storage card. To successfully transfer packaged content, your
Mondo or storage card may require a hardware serial number.
You can play packaged content until the license expires. During license download,
you will be informed of the terms of the license. License terms can be for an
unlimited time, a set amount of time, or a set number of playbacks. A license can
support content being copied to a Mondo or storage card an unlimited number of
times or one time only. Terms are entirely dependent on the content provider.
- Using the Playlist Manager
Use the playlist manager to set the track playback order. All My Music is the
default playlist. It contains all digital audio files available for playback on your Mondo
and storage card. To see a list of recently selected playlists, tap Select Playlist. To
create or edit playlists, tap All Playlists.
Tap and hold a track or playlist to perform actions such
as copying, moving, and deleting.
For more information on using
Windows Media Player, tap ÿ
and then Help.
36
• Microsoft Reader
Use Microsoft Reader to read electronic books on your Mondo.
Download books to your desktop computer from your favorite eBook Web site. Then, use
ActiveSync to copy the book files to your Mondo. The books appear in the Reader Library, where
you can tap them in the list to open them.
Each book consists of a cover page, an optional table of contents, and the pages of the book. Page
through the book by using the Up/Down control on your Mondo or by tapping the page number
on each page. You can annotate the book with highlighting, bookmarks, notes, and drawings. You
can also search for text and look up definitions for words.
The Reader Guidebook contains all the information you'll need to use the software. To open the
Guidebook, tap Guidebook on the Reader command bar. Or, on a book page, tap the book title
and then tap Guidebook on the pop-up menu.
To switch to Microsoft Reader, tap ÿ, Programs, and then Microsoft Reader.
- Getting Books on Your Mondo
You can download book files from the Web. Just visit your favorite eBook retailer
and follow the instructions to download the book files. Sample books and a
dictionary are also included in the MSReader folder in the Extras folder on the
ActiveSync CD. Use ActiveSync to download the files from your desktop computer
to your Skylark as described in the Read Me file in the MSReader folder.
- Using the Library
The Library is your home page; it
displays a list of all books stored
on your Mondo or storage card.
You can go to the Library by
tapping Library on the Reader
command bar. Or on a book page,
tap the book title and then tap
Library on the pop-up menu.
To open a book, tap its title in the
Library list.
- Reading a Book
Each book consists of a cover page, an optional table of contents, and the pages
of the book. Navigation options are listed in the bottom portion of the cover page.
The first time you open a book, you’ll probably want to go to the first page or to
the table of contents, if there is one. Subsequently, whenever you open the book,
you’ll be automatically taken to the last page read.
37
In addition to the text, each book
page includes a page number and
book title.
You can also page through a book
by using the Up/Down control on
your Mondo.
- Using Reader Features
Reading a book electronically gives you several options not available with paper
books. These options are available from any book page.
Select text by dragging across the text on the page. Then, tap an option on the
pop-up menu, as described here:
• Search for Text. Find text in a book by tapping Find on the pop-up menu. Change
the text that appears in the Find box, if necessary, and tap the desired Find
option.The Reader finds the text and highlights it on the page. Tap outside the Find
box to close it. To return to your original page, tap the title and then tap Return on
the pop-up menu.
• Copy Text. You can copy text from a book into any program that accepts text. On
a book page, select the text you want to copy. Then, tap Copy Text on the pop-up
menu. The text you’ve copied can be pasted into the program of your choice.
• Bookmarks. When you add a bookmark to a book, a color-coded bookmark icon
appears in the right margin. You can add multiple bookmarks to a book. Then, from
anywhere in the book, you can tap the bookmark icon to go to the bookmarked
page.
• Highlights. When you highlight text, it appears with a colored background, just as
if you used a marker pen.
• Notes. When you attach a note to text, you enter the text in a note pad that
appears on top of the book page. A note icon appears in the left margin. You can
show or hide the note by tapping the icon.
• Drawings. When you add a drawing, a drawing icon appears in the bottom-left
corner of the page, and drawing tools appear across the bottom of the page. Draw
by dragging your stylus.
To see a list of a book’s annotations, including bookmarks, highlights, text notes, and
drawings, tap Annotations Index on the book’s cover page. You can tap an entry in
the list to go to the annotated page.
38
- Removing a Book
When you’ve finished reading a book, you may want to delete it to conserve space
on your Mondo. If a copy of the book is stored on your desktop computer, you can
download it again at any time. To remove a book from your Mondo, tap and hold
the title in the Library list and then tap Delete on the pop-up menu.
• Pocket Streets
The Pocket Streets feature, included in Microsoft Expedia“ Streets and Trips 2000, AutoRoute
Express‘ Great Britain 2000, and Microsoft MapPoint‘ 2000, delivers thousands of miles of
street map information to your Mondo. You can create custom maps of unfamiliar cities,
towns, and villages.
- Installing Pocket Streets
Pocket Streets is included in the Extras folder on the ActiveSync CD. To install
Pocket Streets on your Mondo, go to the PStreets folder in the Extras folder on the
ActiveSync CD and follow the instructions in the Read Me file.
- Getting Maps on Your Mondo
Sample maps are included in the PStreets folder in the Extras folder on the
ActiveSync CD. Use ActiveSync Explore to copy the files from your desktop
computer to your Mondo. For more information on copying files using ActiveSync,
see ActiveSync Help.
- Creating Map and Pushpin Files for Your Mondo
1- In Microsoft Expedia Streets and Trips 2000, AutoRoute Express Great Britain
2000, or Microsoft MapPoint 2000, draw a box around the area you want to
save as a map.
2- On the Tools menu, click Create Map For Pocket Streets.
3- Click Create.
4- Navigate to the folder where you want to save the map, and then type a
file name for the map.
5- Click Save. When you create a map, all visible Pushpins in the portion of the
map that you selected are also exported.
6- A map file and a corresponding Pushpin file are created for your Mondo.
7- Using ActiveSync, copy the maps (.mps) and/or Pushpin files (.psp) that you've
created for use with Pocket Streets to the My Documents folder on your Mondo.
For more information on using ActiveSync to copy files, see ActiveSync Help
on the desktop computer.
39
- Viewing Maps
To open a map, Tap Tools, Maps,
and then the name of the map
you want to see. If you don't see
the name, tap Tools, Maps, and
then Open Map, select the folder
where you stored the map, and
then tap the name in the list.
For more information on using
Pocket Streets, tap ÿ and then
Help.
40
Pocket Internet Explorer
Use Pocket Internet Explorer to view Web pages in either of these ways:
• During synchronization with your desktop computer, download your favorite links, mobile
favorites, and mobile channels that are stored in the Mobile Favorites subfolder in
Internet Explorer on the desktop computer.
• Connect to an Internet service provider (ISP) or network and browse the Web. To do this,
you’ll need to create the connection first.
To switch to Pocket Internet Explorer, tap ÿ and then Internet Explorer.
• The Mobile Favorites Folder
Only items stored in the Mobile Favorites subfolder in the Favorites folder in Internet
Explorer on your desktop computer will be synchronized with your Mondo. This folder was
created automatically when you installed ActiveSync.
• Favorite Links
During synchronization, the list of favorite links in the Mobile Favorites folder on your
desktop computer is synchronized with Pocket Internet Explorer on your Mondo. Both
computers are updated with changes made to either list each time you synchronize. Unless
you mark the favorite link as a mobile favorite, only the link will be downloaded to your
Mondo, and you will need to connect to your ISP or network to view the content. For more
information on synchronization, see ActiveSync Help on the desktop computer.
• Mobile Favorites
If you are using Microsoft Internet Explorer 5 on your desktop computer, you can download
mobile favorites. (You can install Microsoft Internet Explorer 5 from the Extras folder
on the ActiveSync CD.) Synchronizing mobile favorites downloads Web content to your
Mondo so that you can view Web pages while you are disconnected from your ISP
and desktop computer.
Use the Internet Explorer 5 plug-in installed with ActiveSync to create mobile favorites
quickly.
- To create a mobile favorite:
1- In Internet Explorer 5 on your desktop computer, click Tools and then Create
Mobile Favorite.
2- To change the link name, enter a new name in the Name box.
3- Optionally, in Update, select a desired update schedule.
4- Click OK. Internet Explorer downloads the latest version of the Web page to
your desktop computer.
5- If you want to download the pages that are linked to the mobile favorite
you just created, in Internet Explorer on the desktop computer, right-click the
mobile favorite and then click Properties. On the Download tab, specify the
number of links deep you want to download. To conserve device memory,
only go 1 level deep.
6- Synchronize your Mondo and desktop computer. Mobile favorites that are stored
in the Mobile Favorites folder in Internet Explorer 5 are downloaded to your
Mondo.
41
If you did not specify an update schedule in step 3, you will need to manually
download content to keep the information updated on your desktop computer and
device. Before synchronizing with your Mondo, in Internet Explorer on your desktop
computer, click Tools and then Synchronize. You will see the last time content was
downloaded to the desktop computer, and you can manually download content if
needed.
You can add a button to the Internet Explorer toolbar for creating mobile favorites.
In Internet Explorer 5 on your desktop computer, click View, Toolbars, and then
Customize.
- To save Mondo memory:
Mobile favorites take up storage memory on your Mondo. To minimize the amount
of memory used:
• In the settings for the Favorites information type in ActiveSync options, turn off
pictures and sounds or stop some mobile favorites from being downloaded to
the Mondo. For more information, see ActiveSync Help.
• Limit the number of downloaded linked pages. In Internet Explorer on the
desktop computer, right-click the mobile favorite you want to change and then
Properties. On the Download tab, specify 0 or 1 for the number of linked
pages you want to download.
• Channels
Channels are Web sites designed specifically for offline viewing on your Mondo. You can
subscribe to two types of channels at no fee: AvantGo Channels and mobile channels.
- Using AvantGo Channels
AvantGo is a free interactive service that gives you access to personalized content
and thousands of popular Web sites. Unlike mobile channels, you can subscribe
to AvantGo channels directly from your Mondo. Then, you synchronize your device
and desktop computer or connect to the Internet to download the content. For
more information, visit http://avantgo.com/help.
To sign up for AvantGo:
1- In ActiveSync options on the desktop computer, turn on synchronization for
the AvantGo information type.
2- In Pocket Internet Explorer on your device, tap the Favorites button to
display your list of favorites.
3- Tap the AvantGo Channels link.
4- Tap the Activate button.
5- Follow the directions on the screen. You will need to synchronize your
Mondo with your desktop computer and then tap the My Channels button
to complete the AvantGo setup.
When synchronization is complete, tap the AvantGo Channels link in your list
of favorites to see a few of the most popular channels. To add or remove
channels, tap the Add or Remove link.
42
- Using Mobile Channels
Mobile channels are sites you subscribe to on your desktop computer. They are
stored in the Channels subfolder in the Mobile Favorites folder in Internet Explorer
4.0 or later and are downloaded to your Mondo during synchronization.
To see a list of mobile channels you can subscribe to at no fee, visit the Windows CE
Mobile Channel List Web page (http://www.microsoft.com/windowsce/channels).
Click the Add Mobile Channel button and select Make available offline to
download the channel to your desktop computer. The mobile channel will be
transferred to your Mondo the next time you synchronize. For more information on
synchronization, see ActiveSync Help on the desktop computer.
• Use Pocket Internet Explorer
You can use Pocket Internet Explorer to browse mobile
favorites and channels that have been downloaded to
your Mondo without connecting to the Internet. You can
also connect to the Internet through an ISP or a network
connection and browse the Web.
To view mobile favorites and channels:
1- Tap the Favorites button to display your list
of favorites.
2- Tap the mobile favorite or channel you want
to view.
You’ll see the page that was
downloaded the last time you
synchronized with your desktop
computer. If the page is not
on your Mondo, the favorite
will be dimmed. You will need
to synchronize with your desktop computer again to download
the page to your Mondo or connect to the Internet to view the
page.
43
To browse the Web:
1- Connect to the Internet or your network in either of the following ways:
• Connect using Connections. Then switch to Pocket Internet Explorer by tapping
it on the ÿ menu.
• Connect in Pocket Internet Explorer. To select a service or type of connection,
tap Tools and then Options. Tap the Connections tab and select the connection
type. Then, whenever you want to connect to the selected service, tap Tools
and then Connect.
You can have Pocket Internet Explorer automatically connect to the Internet when
you attempt to access a page that is not stored on your Mondo by specifying a
connection in the Connection tab in Options and selecting Access remote content
automatically.
2- Once connected, go to a specific Web page in either of these ways:
• Tap the Favorites button and then tap the favorite you want to view.
• Tap View and then Address Bar. In the address bar that appears at the top of
the screen, enter the Web address you want to visit and then tap Go. Tap the
arrow to choose from previously entered addresses.
3- To end the connection, tap Tools and then Disconnect.
To add a favorite link while using the Mondo, go to the Web page you want to add,
tap the Favorites button, tap the Add/Delete tab, tap the Add button, and enter a
name for the favorite link.
44
Getting Connected
You can use your Mondo to exchange information with other Windows-powered devices
as well as your desktop computer, a network, or the Internet. Use the infrared (IR) port on
your Mondo to send and receive files between two devices. In addition to using a cradle,
cable, or IR port to connect your Mondo to your desktop computer, you can connect to
your desktop computer while away from the office by using a remote connection. You can
also connect your Mondo to a network or the Internet by using a remote connection. You
have the following connection options:
• Connect to your Internet service provider (ISP). Once connected, you can send and
receive e-mail messages by using Inbox and view Web pages by using Pocket Internet
Explorer. If this is the method you want to use, see "Connect to an ISP". The communication
software for creating an ISP connection is already installed on your Mondo. Your service
provider will provide software needed to install other services, such as paging and fax
services.
Please refer to the online help for further details on sending and receiving SMS messages.
• Connect to the network at your company or organization. Once connected, you can send
and receive e-mail messages by using Inbox, view Web pages by using Pocket Internet
Explorer, and synchronize with your desktop computer. If this is the method you want to
use, see "Connect to Your Network".
• Connect to your desktop computer to synchronize remotely. Once connected, you
can synchronize information such as your Pocket Outlook data. If this is the method
you want to use, see ActiveSync Help on your desktop computer or Connections Help
on the Mondo.
• Transfer Items Using Infrared
Using infrared (IR), you can send and receive information, such as contacts and appointments,
between two Windows-powered devices, and connect to the Internet through an infrared
modem.
To send information:
1- Switch to the program where you created the item you want to send and locate
the item in the list. If you want to send more than one item, drag the stylus
across the items you want to send.
2- Align the IR ports so that they are unobstructed and within a close range.
3- Tap and hold the item, and tap Send via Infrared on the pop-up menu.
You can also send items, but not folders, from File Explorer. Tap and hold the item
you want to send, and then tap Send via Infrared on the pop-up menu.
To receive information:
1- Align the IR ports so that they are unobstructed and within a close range.
2- Tap ÿ, Programs, and then Infrared Receive.
You can also receive items from Tasks, Contacts, Calendar, and Notes by tapping
Tools and then Receive via Infrared in list view.
45
• Connect to an ISP
You can connect to your ISP by creating a modem connection. Once connected, you can send
and receive e-mail messages and view Web pages.
- Choosing which type of modem:
There are 3 types of modem you can use to connect to the Internet:
1- An external modem that is connected by a cable to your Mondo.
2- An infrared modem that sends Web content to your Mondo by infrared.
3- The built-in GSM modem. Using the GSM modem means you can connect to the
Internet any time, anywhere: exactly the way a mobile phone works.
- To create a modem connection to an ISP:
1- Get the following information from your ISP: ISP dial-up access telephone
number, user name, password, and TCP/IP settings. Some ISPs require
information in front of the user name, such as MSN/username.
2- Tap ÿ and then Settings. On the Connections tab, tap Modem.
3- Tap New connection.
4- Enter a name for the connection, such as "ISP Connection".
5- In the Select a modem list, select Trium Mondo. If you are using an infrared
modem, select Generic IRDA modem. If you are using an external modem
that is connected to your Mondo with a cable, select Hayes Compatible on
COM1.
6- You should not need to change any settings in Advanced. Most ISPs now
use a server-assigned address. If the ISP you are connecting to does not use
a server-assigned address, tap Advanced
and then the TCP/IP tab and enter the
address. When finished, tap OK and then
Next.
7- Enter the access phone number, and tap
Next.
8- Select other desired options, and tap
Finish.
9- On the Dialing tab, specify your current
location and phone type (most phone lines
are tone). These settings will apply to
all connections you create. For the Trium
Mondo modem, select Mondo.
46
Once you have created the connection, it appears in ÿ, Programs, Connections.
To start the connection, remove your Mondo from the cradle, tap the connection
icon, enter your user name and password, and tap Connect. Once connected,
you can:
• Send and receive e-mail messages by using Inbox. Before you can use Inbox,
you need to provide the information it needs to communicate with the e-mail
server. For specific instructions, see "Connect Directly to an E-mail Server",
later in this chapter.
• Visit Web pages by using Pocket Internet Explorer.
You can quickly return to Modem Settings to change connection settings by
tapping the Modem link at the bottom of the Connections folder. To return to the
Connections folder, tap the Connections link.
• Connect to Your Network
If you have access to a network, you can send e-mail messages, view intranet pages,
synchronize your Mondo, and possibly access the Internet. You can connect to your
network in one of two ways:
• Create a modem connection by using a RAS account. Before you can create
this modem connection, your network administrator will need to set up a RAS
account for you. If this is the method you want to use, see "To create a modem
connection to a network".
To create a modem connection to a network:
1- Get the following information from your network administrator: dial-up access
telephone number, user name, password, domain name, and TCP/IP settings.
2- Tap ÿ and then Settings. On the Connections tab, tap Modem.
3- Tap New connection.
4- Enter a name for the connection, such as "Company Connection".
5- In the Select a modem list, select Trium Mondo. If you are using an external
modem that is connected to your Mondo with a cable, select Hayes Compatible
on COM1.
6- You should not need to change any settings in Advanced. Most servers now use
a server-assigned address. If the server you are connecting to does not use a
server-assigned address, tap Advanced and then the TCP/IP tab and enter the
address. When finished, tap OK and then Next.
7- Enter the access phone number, and tap Next.
8- Select other desired options, and tap Finish.
9- On the Dialing tab, specify your current location and phone type (most phone lines
are tone). These settings will apply to all connections you create.
For the Trium Mondo modem, select Mondo.
Once you have created the connection, it appears in ÿ, Programs, Connections. To
start the connection, remove your Mondo from the cradle, tap the connection icon,
enter your user name, domain, and password, and tap Connect. Once connected,
you can:
47
• Send and receive e-mail messages by using Inbox. Before you can use Inbox,
you need to provide the information it needs to communicate with the e-mail
server. For specific instructions, see "Connect Directly to an E-mail Server," later
in this chapter.
• Visit Internet or intranet Web pages by using Pocket Internet Explorer. You may
need to set up a proxy server to visit Internet Web pages. For more information on
setting up a proxy server, see Pocket Internet Explorer Help on the Mondo.
• Synchronize. For more information, see ActiveSync Help on the desktop computer.
• End a Connection
If you started the connection from a program, such as Inbox or Pocket Internet Explorer,
disconnect from that program first. Then, tap ÿ and then Today. Tap
or
at
the bottom of the screen and then Disconnect. To end a network connection, remove
the card from your Mondo.
• Connect Directly to an E-mail Server
You can set up a connection to an e-mail server so that you can send and receive e-mail
messages by using a modem or network connection and Inbox on your Mondo.
The ISP or network must use a POP3 or IMAP4 e-mail server and an SMTP gateway.
Inbox does not currently support connecting with proprietary e-mail protocols, such as AOL
and MSN™. However, you can still access the Internet through these services. There may be
third-party programs available that would enable you to send and receive e-mail messages
through proprietary protocols.
You can use multiple e-mail services to receive your messages. For each e-mail service you
intend to use, first set up and name the e-mail service. If you use the same service to
connect to different mailboxes, set up and name each mailbox connection.
Please refer to the online help for further details on sending and receiving SMS messages.
To set up a e-mail service:
1- In Inbox on your Mondo, tap Services, and then New
Service.
2- Select POP3 or IMAP4 as the service type, name the
service, and tap Next. For information on which service
type to select, ask your ISP or network administrator.
3- If you have created a connection you want to use,
select it from the Connection list. If you have not,
select Create new connection and follow the steps in
the wizard. When you return to this screen at the end
of the wizard, select the connection you created from
the Connection list.
48
A wizard will walk you through the remaining steps. For an explanation of a screen,
tap Start and then Help. When finished, tap Services and then Connect to connect
to your e-mail server. For more information on using the Inbox program, see "Inbox:
Sending and Receiving E-mail Messages".
• Get Help on Connecting
More information on the procedures described here, as well as information on additional
procedures, can be found in the following locations:
• "Inbox: Sending and Receiving E-mail Messages".
• Online Help on the Mondo. Tap ÿ and then Help. Tap View, All Installed Help,
and then Inbox or Connections.
• ActiveSync Help on the desktop computer. In ActiveSync, click Microsoft ActiveSync
Help on the Help menu.
• Appendix B: Troubleshooting.
49
Appendix A:
CharacterRecognizer
Using Character Recognizer, you can write characters directly on your Mondo screen with
your stylus, just as you would on a piece of paper. The characters you write are translated
into typed text. Use Character Recognizer anywhere you want to enter text, for example, to
write a note or to fill in fields in a dialog box.
The default writing mode for Character Recognizer is lowercase (Jot-compatible) mode. In
this mode, you write characters in lowercase. The chart at the end of this appendix
contains examples of how to write characters in lowercase mode. You can also choose
to write in uppercase (Graffiti-compatible) mode. In this mode, you write characters in
uppercase. If you prefer to write in uppercase mode, tap Uppercase Mode in Options
on the input method menu. Whether a letter appears in uppercase or lowercase when
it is converted to typed text depends on where in the input panel you write it, not on
the mode you have selected.
The Character Recognizer input panel is divided into three writing areas. Letters written in
the left area (labeled ABC) creates uppercase letters, and letters written in the middle area
(labeled abc) creates lowercase letters. Use the right area (labeled 123) for writing numbers,
symbols, special characters, and punctuation.
The following chart is a partial
display of the characters you can
write while in lowercase mode (the
dot on each character is the starting point for writing). Remember
that even though you write a letter
in its lowercase form, the case of
the text that is displayed depends
on where you write the letter. For
example, if you write a lowercase
"a" in the ABC area, an uppercase
"A" is displayed on the screen.
50
For more information on using Character Recognizer and for demos of all characters, tap
on the Character Recognizer input panel.
51
Appendix B: Troubleshooting
• Reset the Mondo and clear memory
- To reset the Mondo:
You can perform a soft reset or a full reset. If your Mondo responds slowly, stops
responding as expected, or “freezes,” try soft resetting it. A soft reset causes the
Mondo to restart and re-adjust memory allocation. Unsaved data in open windows
may be lost.
Use the stylus to press and hold the Reset button for about two seconds.
- To clear memory:
Warning: Clearing memory deletes all data and restores the Mondo to its default
settings. Programs installed at the factory remain, while data you have created and
programs you have installed are erased.
1- Turn the Mondo on.
2- Remove the main and backup batteries, wait 5 minutes, and then reinsert them.
Use ActiveSync to keep a backup of your Mondo data so that if you need to clear memory, you
can restore the data on your Mondo. For more information, see ActiveSync Help.
• Batteries lose power
When batteries are low, you will see a battery icon in the status bar of the Today screen.
Replace or recharge low batteries as soon as possible. When main batteries are discharged,
your data will be preserved by the backup battery. If the backup battery is discharged, you
run the risk of losing the data on your Mondo.
You want your Mondo battery charge to last as long as possible, especially when you’re
on the road. Under normal conditions, you can get many hours of use from a single
set of batteries or from a full charge. Here are a few tips to help you get the most
from them.
- Use external power whenever possible
Use the AC adapter to plug your Mondo into external power whenever possible,
especially when:
• Establishing a remote connection.
• Using the backlight feature of your Mondo display.
• Connecting to a desktop computer.
- Shorten auto-suspend time
While on battery power, your Mondo automatically suspends operation if you haven’t
touched the hardware buttons or used the stylus for a specified period. Maximize
battery life by shortening the time.
Tap ÿ and then Settings. On the System tab, tap Power, and then adjust the On
battery power setting.
52
- Turn off sounds you don’t need
The Mondo produces sounds in response to a number of events, such as warnings,
appointments, and screen taps or hardware-button presses. To optimize battery life,
turn off any sounds you don’t need. Tap ÿ and then Settings. On the Personal tab, tap
Sounds & Reminders and clear check boxes on the Volume and Reminders tabs.
- Turn off notification light
Tap ÿ and then Settings. On the Personal tab, tap Sounds & Reminders. On the
Reminders tab, clear the Flash light for check box.
• If you forget your password
If you forget your password, you’ll need to clear memory on the Mondo. See "Reset the
Mondo and clear memory", earlier in this appendix.
• If you run out of Mondo memory
Memory on your Mondo is shared between storage memory and program memory. Storage
memory is used to store the information you create and programs you install. Program
memory is used to run programs on your Mondo. Mondo automatically manages the
allocation between storage and program memory. However, in some situations, such as
when memory is low, Mondo may not be able to automatically adjust the allocation. If
you receive a message stating that storage or program memory is unavailable, try the
following solutions.
- Storage memory
• Set programs such as Notes, Pocket Word, and Pocket Excel to automatically save
new items on the storage card. In the program, tap Tools and then Options.
• If you are copying files from your desktop computer or another device to your
Mondo, try adjusting the slider in the Memory setting. Tap ÿ and then Settings.
On the System tab, tap Memory and check whether the slider can be adjusted
manually before copying files.
• Delete unnecessary files. Tap ÿ, Programs, and then File Explorer. Tap and hold
the file, and then tap Delete on the pop-up menu. To find your largest files, tap ÿ and
then Find. In the Type list, tap Larger than 64 KB, and then tap Go.
• In Internet Explorer options, delete all files and clear history. In Internet Explorer, tap
Tools and then Options. Tap Delete Files and Clear History.
• Remove programs you no longer use. Tap ÿ and then Settings. On the System tab,
tap Remove Programs. Tap the program you want to remove and then Remove.
• Clear program memory as described in the following section. This will free some
program memory so that it can be allocated to storage memory.
- Program memory
• Stop programs you are not currently using. In most cases, programs automatically
stop to free needed memory. However, in some situations, such as when confirmation dialog boxes are waiting for a user response, the program may not be able
to automatically stop. To check the state of your active programs, tap ÿ and then
Settings. On the System tab, tap Memory and then the Running Programs tab.
53
Tap the program you want to view and then tap Activate. Close any open windows or
messages and return the program to list view. If this doesn’t work, you can stop the
program manually. First, make sure that your work is saved by closing open items
and returning the program to list view. Then, stop the program by tapping Stop or
Stop All on the Running Programs tab.
• Clear storage memory as described in the preceding section. This will free some
storage memory so that it can be allocated to program memory.
• Reset your Mondo, as described in "Reset the Mondo and clear memory", earlier
in this appendix.
• Screen freezes or responds slowly
Reset your Mondo. See "Reset your Mondo and clear memory", earlier in this appendix.
• Screen is blank
If your Mondo doesn’t respond when you briefly press the Power button, press and hold
the button for a full second. If that doesn’t work:
• Make sure your battery cover is locked and all expansion slots are secured.
• Plug the Mondo into AC power.
• Change or recharge the main batteries and backup battery.
• Adjust the display contrast. On some skylarks, the screen can darken or lighten to the
point that it appears to be powered off.
• Reset the Mondo. See "Reset the Mondo and clear memory", earlier in this appendix.
• Screen is dark
Prolonged exposure to direct sunlight may cause your Mondo screen to temporarily darken.
This is normal for LCD screens and is not permanent.
• Screen is hard to read
If you’re having a hard time viewing a document in Notes, try changing the size of the view.
To do this, tap a zoom percentage on the Tools menu. In Pocket Word and Pocket Excel, on
the View menu, tap Zoom and then select a zoom percentage. In Pocket Internet Explorer,
on the View menu, tap Text Size and then select a size.
If you’re having a hard time viewing Pocket Outlook data, try enlarging the display font.
To do this within Calendar, Tasks, or Contacts, tap Tools, then Options, and then select
Use large font.
• Inaccurate response to stylus taps
Adjust the touch screen to respond more accurately to screen taps. Tap ÿ and then
Settings. On the System tab, tap Align Screen.
• Slow or no response
Reset your Mondo. See "Reset the Mondo and clear memory", earlier in this appendix.
54
• Infrared (IR) connection problems
If you are unable to use IR to transfer information, try the following:
• Transfer only one file or no more than 25 contact cards at a time..
• Line up the IR ports so that they are unobstructed and within a close range.
• Make sure nothing is between the two IR ports.
• Adjust the room lighting. Some types of light interfere with IR connections. Try moving
to a different location or turning off some lights.
• Modem connection problems
You may encounter the following problems when using a modem. Additional troubleshooting
information is available in Connections Help on the Mondo and ActiveSync Help on the
desktop computer.
- Can’t dial out
• Remove your Mondo from the cradle. You cannot connect using a modem if your
Mondo has an active connection with the desktop computer.
• Please refer to the online help for further details on Trium Mondo modem
connections.
• Verify that the modem is firmly seated and connected to your Mondo and the
telephone jack.
• Make sure the telephone line is analog (Analog telephone lines transmit data in
analog instead of digital form. Your home telephone line is most likely analog, while
office telephone lines are often digital).
• If you create a modem connection for an external modem, select Hayes Compatible
on COM1 as your modem. If you are using a modem card, select the modem
card as your modem.
• To use an external modem, you need to use a NULL modem cable and appropriate
adapters to connect the external modem to your Mondo.
• Make sure the modem is waiting for a dial tone. Tap ÿ and then Settings. On the
Connections tab, tap Modem. Tap your connection and tap Next. Make sure Wait
for dial tone before dialing is selected.
• For international calls, allow more time for the call to go through. Tap ÿ and
then Settings. On the Connections tab, tap Modem. Tap your connection and
tap Next. Clear Cancel the call if not connected within or increase the number
of seconds allowed. For information on dialing patterns, see Connections Help
on the Mondo.
- Can dial out but can’t make a proper connection
• Make sure the network to which you are trying to connect supports the Point-toPoint Protocol (PPP). Your Internet service provider or network administrator can
verify this.
• Verify that the location is correct. Tap ÿ and then Settings. On the Connections
tab, tap Modem. On the Dialing tab, make sure that Location reflects your current
location. Tap Dialing Patterns to make sure the correct sequence of numbers is
being dialed. For information on dialing patterns, see Connections Help on the
Mondo.
55
• Verify that you are using the right phone number for the modem you are trying
to reach. Tap ÿ and then Settings. On the Connections tab, tap Modem. Tap
the connection and then Next and double-check the phone number you are trying
to reach.
• Please refer to the online help for further details on Trium Mondo modem
connections.
- Connection is unreliable
• Make sure the modem is firmly seated and connected to your Mondo and the
telephone jack.
• Disable call waiting. Tap ÿ and then Settings. On the Connections tab, tap Modem.
On the Dialing tab, select Disable call waiting. Then enter the disable code
specified by your telephone company.
• Cable and cradle connection problems
The following solutions may help if you encounter problems when connecting to your
desktop computer. Additional troubleshooting information is available in Connections Help
on the Mondo and ActiveSync Help on the desktop computer.
• Ensure the Mondo is turned on.
• If a modem or Ethernet card is inserted into your Mondo, remove it.
• Ensure that you do not have any other active connections. Tap ÿ and then Today. Tap
or
at the bottom of the screen and then Disconnect.
• Ensure the cable is securely plugged into the COM port on the back of your desktop
computer. Use the cable that came with the Mondo without any extra cables or
extenders attached.
• Plug the other end of the cable securely into the correct port on your Mondo. If you are
using a cradle, push your Mondo securely into the cradle.
56
Appendix C:
Hardware Specifications
Feature
Mondo
PDA module: Processor
Intel SA-1110 CPU.
Memory
SDRAM 16MB; FlashROM: 8MB
(standard) or 16 MB; ROM 16MB.
LCD module
3.8” 240x320 graphic in 0.24mm pitch
QVGA; B/W 16 gray STN SemiTransmission.
Buttons
Four programmable buttons (one GSM
and 3 Windows CE AP buttons); power
and back light control; jog wheel for
scroll up, down, action; one side but
ton.
Stylus
95mm, maximum diameter 5mm.
Notification
One GSM LED for event standby; one
PDA LED for event alarm, charge;
Vibration motor.
Audio
Built-in Microphone, speaker and buz
zer; one earphone/mik jack with ste
reo sound; MP3 stereo.
Power
Talk: 4 hours; standby: 100 hours;
rechargeable battery, Li-lon; 3.7V 900
mAh; backup battery: CR2032; AC
adapter 90-240VAC, 5V/2A 10W; builtin charger.
Accessories
AC adapter; RS232 synching cable;
ear plug; service kit; protective carry
case; cradle: DC jack, serial port, USB
slave.
57