39 Jon Boat Pedestals and Seat Mounts

Jon Boat Pedestals and Seat Mounts
Aluminum Pedestal
This heavy aluminum pedestal works well on many jon boats. It has one side open for storage.
It is 14” high and is heavily reinforced for seat mounting.
A.K.’s price $79.99
Aluminum Reinforcement Plate
This .125 gauge aluminum plate is used for reinforcement when mounting pedestals and seats in
jon boats. It measures 17” (length) 12” (width) with a 2” lip.
A.K.’s price $29.99
Removable Seat Mount
This removable seat clamp works perfectly as a non-permanent mount. It includes a swivel, is well
built, and adjusts from 8” to 19”. If you want the ability to easily install and remove your seat, this
mount could be for you.
A.K.’s price $31.99
Alumacraft Jon Boat Seat Clamp
(Shown with optional swivel.) Available in 13”, 16” or 19” widths. Fits seats only with lip
or overhang.
Seat mount $31.99
Swivel
$7.99
Lowe Seat Mount
This is the seat mount we highly recommend for mounting seats in your jon boat. It is available in five sizes (12”, 14”, 16”, 18”, 20” and 22”) for different width seats. The mount slides
down over the bench seat and is screwed into both sides in several places. The swivel seat is
installed on the mount before it is attached to the bench seat. These mounts are three inches
higher than the bench seat and will not pull out.
A.K.’s price $31.99
Lowe Slider Base
The Lowe slider base is the ultimate in seating for a jon boat. It is desirable when one wants to be
able to move the same seat from side-to-side. Its track mounts to the bench seat and a locking swivel
seat slides along the track. The seat is easily removable by tilting forward and lifting up.
• Base plate only (not used with a swivel $12.99)
A.K.’s price $37.99
• Extra rail only $24.99
SWIVL-EZE Aluminum Bell Pedestal
• 8” Fixed height
• 12” Fixed height
• 14” to 20” Adjustable
SWIVL-EZE
ADJUSTABLE BELL PEDESTAL
$49.99
Cast aluminum designed with nylon sleeves.
$54.99
Locking 360º swivel works flat or at 3º angle.
$69.99 (As shown in picture)
10” mounting base with 6 countersunk holes.
Brushed satin finish base. 2-3/8” diameter tube.
Removable Pin Pedestal
This three piece pedestal set has become our most popular pedestal. It has a 7” by 7” base with a 13” extension.
A.K.’s price $55.99 (As shown in picture)
Stainless Steel Base
For above pedestal
$27.99
3 Sizes
7"x7"
6"x8"
4"x8"
Aluminum Pin Extension
For above pedestal sizes 6”
11”
All Lengths
13”
$15.99
16”
39
Seat Spider
For above pedestal
$12.99
Stainless Seat Spider
$29.99
ROD HOLDERS
Driftmaster Rodholders — Holds Rod Securely, Quickest Release Made!
—Fully Adjustable Side-to-Side
—Solid Steel Construction
—Easily Removed For Storage
—Plated Steel Sterns
—Heavy Duty Plastic Coating
—Stainless Stem And Wingnut
Will Special Order and
Available For All 4” Stern Models Pro Series Rod Holders
Pro Series
The choice among saltwater and
freshwater anglers. Built wider to
hold larger rod handles. All Pro
series holders have 1/2” diameter
stems and fit only Pro series bases.
Li’l Pro
Pro—
Holds
rod tip
in horizontal
position for fishing straight down.
Li’l Pro—5º angle keeps long pole
tips out of the water.
A.K.’s Price $12.99
Fight The Fish...
Not The Rod Holder!
Driftmaster’s one
step release sets the
hoook and frees
the rod in one easy
motion. That means
fewer missed strikes!
A.K.’s Price
$16.99
Li’l Pro Series
Just the right size for panfish but
tough enough to handle a “big un.”
All Li’l Pro series holders have 3/8”
diameter stems and fit only Li’l Pro
series bases.
Everything you need in a rodholder. Adjustable rodholders only give you
two effective fishing positions and they can break, sending your expensive
equipment to the bottom of the lake. The Duo and Li’l duo give you the
most effective rod angles and it will not break...ever! Holds rod tip at 0º with
handle in top loop of 30º when handle is in bottom loop. Comes standard
with stainless steel stem & wingnut.
Li’l Troller
Rod Rester
Longstem—
Hold rod at 45º
• Avoid tangled lines and
All
Rod
Holders
broken tips
trolling angle. A
• Secure rod in vertical position are available
closed rear loop
• Attaches to any Pro or Li’l with 8” stem.
grips rod handle
Pro stem
Not available
securely when
A.K.’s Price $10.99 on Lean-mean
experiencing slack
rodholder.
Lantern Holder
A.K.’s Price $16.99 line or rough
• Fits any Pro base
water.
A.K.’s Price $16.99
• Plated steel
• T-Bar adjust left to right and locks in place
A.K.’s Price
• Holds lantern over
• Rodholders adjust vertically and left to right
water or in boat
Two rod system $35.99
No-Swing
Tip
Includes: 200-B, 7/8” Round T-Bar with 10”
locking stem, 214-B bases (rod holders optional)
A.K.’s Price $19.99
Four rod system $39.99
Driftmaster Bases — A Base For Every Mounting Situation
—Machined From Solid Aluminum
(Except For SSRB-0 & SSRB-1)
—No Sharp Edges To Fray Lines
V Round
Rail
Base
Flush Base
Square
Rail
Clamp
Li’l Pro—Fits 2” or Li’l Pro—Fits 1” or wider Li’l Pro—Fits any size Base
Star Base
Flat
Base
—Remain Attached To Boat While
Holders Are Easily Removed
wider flat surface. flat surface. Ideal for
Mounts with three 1/4” pontoon rails. Mounts
with two 3/16” bolts.
dia. screws or bolts.
A.K.’s Price $5.99 A.K.’s Price $5.99
EXP-RHRM Universal Rail Mount Square & Round Rail
• Fiberglass-injected nylon construction
• Perfect for boats and pontoons
• Mount accessories to a
rail or grab handles
• All hardware included
round rail or curved
surface. Mounts with Li’l Pro—Fits up to
1 1/4” Square Rails.
two 3/16” bolts.
A.K.’s Price $5.99 A.K.’s Price $7.99
Universal Accessory Mate Fits All Rod
Holders (Shown Mounted on RH401)
A.K.’s Price $13.99
A.K.’s Price $13.99
EXP-RH302 Compact Deluxe Rod Holder
• Fiberglass-injected nylon construction
• Exclusive Quick Release Base Mount
• ALOCK rod secure ring
• 360 degree adjustable rotation
• Completely adjustable to
multiple vertical or horizontal
positions
• Includes a side or top deck
mounting system
A.K.’s Price $17.99
SUPER ROD HOLDERS
Universal Accessory Mate fits all Rod Holders. Why have
tackle and tools laying around the boat? Organize them
in the area you need them most; near your rod. Accessory
Mate has been organizing
boats for decades. A must
for any versitile fisherman.
• Attaches to all rod holders
• Convenient accessory holes for pliers,
lures, etc.
• Fiberglass-injected nylon construction
• Fully adjustable to a variety of positions
• All hardware included
Li’l Pro—Base surface
is only 3/16” above
mounting surface for a
low profile look. Mounts
with two 1/4” screws.
Side
Mount
Base
Li’l Pro—Fits Jon boat gunnels where vertical holes
can’t be drilled. Can be bent
in vice for difficult mounting angles. Mounts with two
1/4” screws or bolts.
—Stainless Hardware Included With Clamp
Bases Only. Sold Separately For Other Bases
Round Rail
Universal
Clamp
Clamp
Base
Base
7/8” Rails
1” Rails
Li’l Pro—Rod can be
adjusted to any angle by
turning base on rail then
tightening clamp wing
A.K.’s Price $5.99 nut.
A.K.’s Price $7.99
A.K.’s Price $6.49
EXP-RH401 Stainless Rod Holder
• Polished 240 Marine grade stainless steel
• Fiberglass-injected nylon "Quick-Release"
collar
• Unique "Quick Pivot" rod release
• 360 degree adjustable rotation
• Completely adjustable to vertical or
horizontal positions
• Includes a side or top deck mounting system
Li’l Pro—Clamps to
docks, war eagle and jon
boat gunnels and round
rails. Opens to 1 7/8”.
A.K.’s Price $8.99
(Shown Extended)
A.K.’s Price $33.99
EXP-RH811 Heavy Duty Rod Holder
EXP-RH301 Polished Aluminum Rod Holder EXP-402 Fluted Rod Holder Extension
• Fiberglass-injected nylon construction
• Universal rod holder extension
• Unique "Quick Pivot" rod release
• Fiberglass-injected nylon
• 360 degree adjustable
construction
rotation
• Multi-positions, minimizes tangles
• Completely adjustable
• Maximize lure spreads
to multiple vertical or
• Extends height by 8 3/8"
horizontal positions
• Includes a side or top deck
• 360 degree pivoting
mounting system
• Added height makes rod access easier
A.K.’s Price $22.99
A.K.’s Price $24.99
• Fiberglass-injected nylon construction
• Quick Release base
• Heavy Duty "O" Ring lock
• 360 degree adjustable
rotation
• Completely adjustable
to multiple vertical or horizontal
positions
• Includes a side or top deck
mounting system
A.K.’s Price $12.99
A.K.’s Price
$18.99
A.K.’s Price
A.K.’s Price
(Black)
(White)
$7.99ea.
$5.99ea.
Available
in Black
or White
A.K.’s Price
$12.99
*Pliers & Knives
not included
40
A.K.’s Price
$22.99
Safety Equipment & Camo Kits
Boat Cushions
Fire Extinguishers
This compact fire extinguisher comes complete
with pressure gauge and
mounting bracket. It is
Coast Guard approved.
These soft, long-lasting cushions make
a welcome addition to any boat. They
serve as a Coast Guard approved throwable device on boats over 16ft. They are
available in green, red, white, blue and
camouflage.
A.K.’s price $11.99
Compare at $14.99
AK1 Life Jacket
This Type II foam filled life jacket is Coast
Guard approved. There is one universal adult
size and two children’s sizes (under 50 lbs.
and 50-90 lbs.)
Compare at $10.99 A.K.’s price $7.99
Compare at $29.99
ORION Hand Held Red Signal Flares
Meets Coast Guard regulations for all boats for day and night use.
These signals are the most economical way to comply with new Coast
Guard regulations which require three pyrotechnic signals. Reusable
Clamshell Package with handle and locking tabs. Average candlepower: 700 Average burn time:
Nearly 3 min. each (8 min. 54
seconds total)
Adult and Youth Universal Sport Vests
• Great for the active sportsman looking for style, comfort,
and value
• Roomy pockets to keep fishing necessities close at hand
• Lightweight, durable foam contours to your body and
won't hinder your mobility
• D-ring attachment
COLOR
SPRUCE
SPRUCE
SPRUCE
MAX-4 HD®
MAX-4 HD®
MAX-4 HD®
TAN
TAN
TAN
SIZE
YOUTH (50-90 LBS)
ADULT UNIVERSAL
ADULT L/3XL
YOUTH (50-90 LBS)
ADULT UNIVERSAL
ADULT L/3XL
YOUTH (50-90 LBS)
ADULT UNIVERSAL
ADULT L/3XL
CHEST
24-29"
30-52"
40-60"
24-29"
30-52"
40-60"
24-29"
30-52"
40-60"
A.K.’s price $24.99
A.K.’s price $27.99
SAFE & SOUND SIGNAL HORNS
Meets USCG requirements for recommended boat lengths. Non-flammable
for maximum user safety. Contains no
CFCS. Deeper sound. Faster alert time.
A.K.’s price $25.99
8 oz. CANISTER
A.K.’s Price $16.99
BIGGER - BETTER - FASTER!
Mossy Oak
Shadow Grass®
Camouflage
Stencils - Plus Paint!
New from Styx River® &
Reelfoot Custom Camo®:
Licensed Camouflage
Stencil Kits!
Now you too can produce a high quality camouflage
paint job in your own back yard! Stencils are laser-cut
for incredible detail and are the same as those used
by manufacturers who paint Mossy Oak® Brand Camo
on your favorite hunting equipment. Hidin’ Rides with
Mossy Oak has never been easier! Camo your vehicle,
ATV, duck boat, tree stands, gun, bow, trailer and more.
Stencils are constructed of Mylar plastic making them
solvent resistant and durable for years of dependable
use. Stencil kits contain extra large 30” stencils, detailed
instructions, and the paint needed to complete small
projects (50-70 sq. ft.) or start large ones!
Contents:
•4 - 12 oz. cans of Krylon® Spray Paint
(2 Black, 1 Med. Brown, 1 Sand Dune)
•1 Grass Stencil 20 1/2” x 30”
•1 Bark Stencil 15” x 30”
•1 Large Spot Stencil 81” x 30”
Camo Patterns in Stock
Mossy Oak Break Up
Mossy Oak Shadow Grass
Advantage Max 4
A.K.’s Price
$99.99 kit
$99.99 kit
$89.99 kit
(Boat shown) Alumacraft 1436 required approx. 8 cans
of spray paint.
Styx River Camouflage Paint
Styx River Camouflage Paint is formulated to give you a flat,
durable, non-reflective finish that is rust inhibitive, water resistant,
and perfect for reproducing today's licensed camouflage patterns.
The color selection is designed to let you blend with natural settings,
breaking up outlines and shapes, using Styx River's licensed pattern
stencil kits.
• Extremely durable on multi-surfaces
• Color formulated to reproduce today's licensed patterns
• Non-reflective
• Designed to create life-like results when blending colors together
• Fast drying under normal conditions
A.K.’s price $21.99
41
Jon Boat Specialty Items
Boat Covers
We offer a heavy duty line of boat covers for many jon boats and aluminum bass boats. These durable covers are made
of 10 oz. poly cotton which is almost twice as thick as other covers. The cover has a doubled applied water repellent
which is mildew resistant with a UV resistant finish. This cover is excellent for trailering, will cover the motor and comes
in a haze gray color. New for 2014: Some covers are also available in Sundura (upgraded fabric). (For information
on Sundura, go to our website.)
Open Jon Boat Covers
Model
OJ-12
OJ-14
OJ-14W
OJ-16
OJ-17
OJ-18
Centerline Length
12’ 6”
14’ 6”
14’ 6”
16’ 6”
17’ 6”
18’ 6”
Model
JON-14
JON-15
JON-16
JON-17
JON-18
JON-18CC
Centerline Length
14’ 6”
15’ 6”
16’ 6”
17’ 6”
18’ 6”
18’ 6”
Beam Width
58”
60”
72”
72”
80”
84”
Retail
$149.99
$154.99
$159.99
$169.99
$179.99
$189.99
A.K.’s Price
$129.99
$139.99
$149.99
$159.99
$169.99
$179.99
Sundura
$154.99
$164.99
$179.99
$189.99
$204.99
$214.99
Aluminum Jon Style Bass Boat Covers
Beam Width
68”
70”
72”
74”
82”
90”
Retail
$169.99
$179.99
$189.99
$199.99
$209.99
$269.99
A.K.’s Price
$149.99
$164.99
$174.99
$189.99
$199.99
$244.99
Sundura
$179.99
$199.99
$204.99
$229.99
$239.99
$294.99
Deluxe Bimini Top
These deluxe folding tops are the perfect refuge from a blazing summer sun. Made of heavy-duty white 14 oz. marine
vinyl with denim backing that features an all weather finish. They come complete with tubing, straps, and hardware. They
do an excellent job on jon boats. The tops have three bows and are 54” and 60" high and offer 6 feet of coverage. These
tops are available in five sizes to fit most boats (measure the beam to determine the size). The color of the top is white and
includes the boot.
• 54” to 60” $279.99
• 61” to 66” $279.99
• 67” to 72” $289.99
• 73” to 78” $289.99
• 79” to 84” $299.99
Extra Long Deluxe Bimini Top
Same as the deluxe top but offers more coverage with 48” high and 8 feet of coverage. The boot is included.
• 73” to 78” $339.99
• 79” to 84” $349.99
Economy Bimini Top
This two bow economy top is made of 11 oz. gray duck canvas. It is 42” high and provides 5’ 6” of coverage. This
does not include the boot.
• 53” to 62” $179.99
• 63” to 73” $179.99
Sunbrella Bimini Tops
This is the perfect top for most aluminum or fiberglass center
console boats. Constructed of 9.25oz Sunbrella 100% woven
acrylic, this cover resists water, mildew, rot, sun and fading.
Aluminum framing with all mounting hardware, these tops
include the boot, and the colors available are toast, pacific
blue, or burgandy. These covers fit Cape Craft, Carolina
Skiff, etc. and Roughneck, Sea Ark, Alumacraft, etc.
• 73” to 78” $349.99
• 79” to 84” $359.99
This is one of our most popular options.
• 85” to 90” $364.99
• 91” to 96” $379.99
Also available in camoflauge
Available in 46", 54", 60” Height
42
Jon Boat Specialty Items
Lowrance® Elite-3x Color Fishfinder
• 3.5", 256-color TFT LCD • LED-backlit color display w/detailed 320Hx240W resolution that's easy to see in full sunlight &
from wide viewing angles • Broadband Sounder™ detail easily identifies fish targets, bottom contour, structure detail, bottom
hardness, thermoclines & more • Patentedd Skimmer® transducer w/built-in water temperature sensor can track bottom up to
75mph • Fish I.D. displays fish icons instead of fish arches to help identify fish targets & includes track and alarm options •
Advanced Signal Processing (ASP) reduces the need to manually adjust settings to see fish, structure & bottom detail more clearly
• Pages button allows user to quickly switch between sonar frequency views • Dedicated quick keys allows user to zoom up to
four times the standard view & focus on key fishing areas • Power button doubles as backlight control to adjust for daylight or
nighttime fishing situations • Tilt & swivel bracket
A.K.’s price $99.99
UM380 SOLARA D DSC VHF MARINE RADIO
Compact, sleek 25 Watt VHF radio w/text display to show channel names, radio menu, DSC
features & GPS data. Rugged microphone features Channel 16/9 & triple watch select keys. Includes
all USA, International & Canadian channels. Meets JIS7 submersibles standards. Offers full DSC capability, including Position Send
& Request. Features Orange backlit LCD & keys w/LCD contrast control, NMEA input/output, memory channel scan, large full dot
matrix display, NOAA Emergency Weather Alert (including S.A.M.E.). Receiver spec.: Sensitivity 0.27 uV; Rejection: 70 dB.
Mfg.# UM380
Color White
Mfg.# UM380BK
Color Black or White
Deluxe Jon Boat Running Light Kit
A.K.’s price $119.99
This is the running light kit that works best with jon boats. It comes complete with stowaway plug-in bow and
stern lights, 25 feet of wire, and a three-way switch. The lights may be stowed away when not in use, with a
flush-mounted plug remaining mounted. For a dependable lighting system, this is the way to go.
A.K.’s price $89.99
Jon Boat Bilge Pump Kit
This kit contains everything needed to install a bilge pump in your jon boat. Included is a 400 G.P.H. bilge pump, bilge
hose, switch, electrical connectors, wire and an over-the-transom output tube.
A.K.’s price $42.99
Travaco Marine-Tex Repair Kit
Made from epoxy resins and reinforced with high strength fillers, then further processed with a series of other
plastic materials. Bonds to metal plastics, hard and soft wood, plywood, etc. Hardens to tensile strength of
10,000 lbs. per sq inch. Non-magnetic, non-rusting and non-corrosive. Kits contain catalyst and instructions.
Size
A.K.’s price
$12.99
Grey
2 oz.
14 oz.
$37.99
White
2 oz.
$12.99
14 oz.
$37.99
• Roto-Molded Construction • Ruled Cutting Board • With Mounting Inserts and Drain Plug
Part #
Capacity
Dimensions in Inches
A.K.'s Price
48280-W
42281-W
42283-W
23 gallons
29 gallons
49 gallons
18"H x 20"D
17"H x 23"D
18"H x 29"D
$109.99
$119.99
$149.99
Check out our selection of bilge
pumps, aerator pumps, washdown
pumps including thru hulls, hose,
switches, etc.
43
General Marine Accessories
Master Cleats
These hard nylon cleats are very strong. They have a black etched finish and will not rust.
They have two pre-drilled holes for mounting and they work very well on jon boats. Three
sizes are available.
4 1/4” $1.99
6” $3.49
8” $4.99
Battery Boxes
These rugged polypropylene boxes protect your battery. Black in color, they come complete with a tie
down strap and mounting hardware. Three sizes are available.
11”
13”
$9.99
$9.99
(fits 85 amp batteries)
(fits 105 and 140 amp batteries)
Dyer Number/Letter Kit
This kit contains four of each number and letter. The letters are three inches high and meet all N.C.
regulations. They are easy to apply and last for years. They are available in red, black, white and blue.
A.K.’s price $8.99
Fold-up Rigid Ring Drink Holder
This drink holder works great on most jon boats and many other boats. It holds 12-ounce cans and
glasses and folds up when not in use. Available in black or white.
A.K.’s price $5.99
Caviness ABS Paddle
This paddle has a wide, extra
tough ABS blade and a strong
aluminum shaft. Lengths available:
4’, 4’6”, 5’, 5’6”.
Compare at $24.99
A.K.’s price $19.99
Aluminum Oar
Really lasts and out performs wood! Advanced blade
design is molded to provide maximum power and minimum
slippage for efficiency 1 1/4" shaft diameter.
• Lightweight And Durable
• Will Not Warp
• Corrosion Resistant Aluminum Shaft
• High Impact, Cupped, Molded Blade
Description
6' Oar—9.80
7' Oar—11.18
Blade Edge
Curvature
A.K.'s price $21.99
A.K.'s price $24.99
Model
008660
008670
X-I Kayak Paddle
This ever popular SeaSense original is the best paddle
for use with our Creek boats.
• Two Piece Aluminum construction
• Lightweight, Black Molded Plastic Blades
• Adjustable Drip Guards/Foam Rubber Grips
• Excellent for use with our Creek Boats.
Description
Kayak 84"
Kayak 96"
A.K.'s price $24.99
A.K.'s price $26.99
Oarhorns
Our oarhorns by Attwood are the most popular brand we sell. Their 1/2” shaft fits most jon boats.
A.K.’s price $7.99 per pair
44
General Marine Accessories
Trolling Motor Plugs and Sockets
This combination
makes a neat and
simple way to wire
a 12 volt trolling
motor. (Features 8
gauge wire)
Boat side socket $13.99
Motor side plug $12.99
Speed XP
Junior
Designed for all boats &
inflatables with 1-1/2 to 40 HP
motors. Stops bow rise on all
boats including tiller steering.
Stability, control & superior ride.
Improves fuel economy at higher speeds.
Mfg. # Color AK’s discount price
SJR-XP1 Black
$49.99
SJR-XP2 White
$49.99
SJR-XP3 Gray
$49.99
Speed XP
Hydrofoil Stabilizer
Made with SPEED-XP. Patent pending Speed
Covers reduce drag by eliminating water “slap”
against the back side of hole. Hides mounting
hardware, giving the hydrofoil a sleek, OEM,
invisible-mount look. Patent pending StingRay™ logo with
Vision-3™ technology, enhances the look of your boat.
Mfg. #
Color
AK’s discount price
SJR-XP1
Black
$59.99
SJR-XP2
White
$59.99
SJR-XP3
Gray
$59.99
Alumacraft Trolling Motor Mount
An Easy to install trolling motor mount to fit
Alumacraft Job boats and may fit other brand
boats. 3 Sizes in stock.
(#1) Fits 1036, 1236, 1436 LT. WT. – 15" Long, 4 1/16" High
(#2) Fits 1436, 1442, 1542 – 22 1/2" Long, 4 1/8" High
(#3) Fits 1448, 1648 – 24" Long, 5 5/8" High
A.K.’s price $32.99 ea.
Trolling Motor Mounts
(For Lowe/Roughneck Jon Boats)
These aluminum jon boat trolling motor mounts are manufactured
by Lowe/Roughneck to make mounting a foot control motor quick
and simple. Height is adjustable.
(#1) Flatbottom (#2) Sharper V (#3) Mod-V (pictured) Flatbottom mount
installed with motor. (For dimensions on mounts, go to our website.)
A.K.’s price $59.99
Plush Marine Carpet
(For Pontoons and other boats)
This is original factory carpet used in many new boats.
Colors available: red, blue, gray, green and beige
A.K.’s price $8.00 per running foot
(carpet is 6 feet wide)
$10.00 per running foot
(carpet is 8 feet wide) for pontoons
(8 1/2 foot also available in stock)
3-M Non Skid Tape
1" — 75¢ Ft.
2" — $1.50 Ft.
4" — $2.50 Ft.
6" — $5.00 Ft.
Bunk Carpet
12" Wide $1.50 per ft.
18" Wide $2.25 per ft.
Clear Coat Waterproof Contact Cement
This cement has proven to be a lasting and easy to use product for installation of carpet.
A.K.’s price $12.99 per quart $33.99 per gallon
45
General Marine Accessories
SeaSense® Bilge Pumps
• Quick Release Strainer Base for Easy Cleaning
• Stainless Steel Shaft & Mounting Screws
The SeaSense® submersible bilge pumps are tough enough for any • 30" Tinned Marine Grade Wire Leads
bilge. The 600 GPH and 800 GPH use 3/4" hose and the 1100 GPH • Universal Mounting Hole Positions
• Impact Resistant ABS Housing
uses 1-1/8" hose. Meets ABYC specification H-22.
• Certified Flow Rates
Description
• Ignition Protected
600 GPH—$12.99 • 800 GPH—$19.99 • 1100 GPH—$26.99
Attwood Sahara Automatic Bilge Pump
This is a 500 gallon per hour pump that can be wired to turn on automatically. It works great when your
boat is left in the water overnight, for example. The S-500 has plenty of pumping power for most jobs.
Sized for boats up to approx. 17 ft. It requires a three-way switch and a 3/4” hose.
1100GPH $79.99
Retail $64.99
A.K.’s price $47.99
SeaSense® Fisherman's Live Bait Aerator
• Works On Any 12V Power Source
• Impact Resistant ABS Housing
• 30" Marine Grade Tinned Wire
• Telescopes Up To 13-3/4"
The most versatile aerator pump on the market! For coolers, buckets and
livewells. Salt or fresh water. Super strong suction cups. No drilling, no
screws. Completely portable. Adjustable spray control and telescopic nozzle
height keep bait alive longer.
A.K.’s price $19.99
SeaSense® LED Switch Panel
Complete with push-button reset breakers, toggle switches, LED indicator lights and marine grade tinned
wire. Panel rating: 12V, 40 amp total. Individual circuit 10 amps. Stainless mounting hardware included.
Corrosion-free aluminum panel. Description
4 Gang LED Switch Panel—$34.99
•
6 Gang LED Switch Panel—$42.99
Master Tool Rod Holder
Rod Holder
This is a 1-piece flush mount heavy-duty plastic rod
holder. A 1-5/8 ID x 9-1/2”H. 3-1/2” x 4-1/4”
flange diameter.
Mfg # 447-White A.K.’s price $7.99
Mfg # 447-Black A.K.’s price $7.99
Aluminum Rod Holder
Durable,
economical
and corrosion
free. Includes
Model#
L
W
#8x3/4"
mounting 50091425 7-13/16" 2-1/4"
A.K.’s price $16.99
screws.
This is a 1-piece flush mount stamped stainless
steel rod holder with full black rubber liner and
cap. Mounting gasket included..
A.K.’s price $24.99
Side Mount Rod
Saver
H
3-1/4"
LIGHT
EMITTING
DIODE
Re-designed to hold 3 handle
ends of rods per side with specially designed tip insert on the
other side.
SM4 A.K.’s price $14.99
SM6 A.K.’s price $16.99
SM8 A.K.’s price $18.99
Solid Brass latch lock for trailer coupler. The coupler cannot be opened or
closed when the lock is in place. 3/4" diameter
A.K.’s price $10.99
Master Lock Armorlock
High powered answer to guarding your trailer on or off vehicles. Revolving
case-hardened steel shackle fits openings 1/2” dia. or larger; shackle guard removable to accommodate
A.K.’s price $13.99
opening. Pair of brass keys included.
Outboard Motor Lock
Fits the majority of motors secured to transom by means of clamp screws (except
certain Chrysler outboards). Made of case-hardened steel, the tube is 100% vinyl
clad against weather, water and corrosion. Features precision marine-brass pin-tumbler locking mechanism. The
padlock is double locked against prying and recessed so tube forms and added case-hardened shield against
cutting. Pair of brass keys included.
A.K.’s price $24.99
46
Anchors
Never Slip Anchor Lock
This may be the handiest accessory you can put on your boat. With this, your anchor can be easily
pulled in or locked in place. It handles rope from 3/16” to 1/2” and anchors up to 20 lbs.
A.K.’s price $7.99
Anchor Mate by Worth
This simple to use tool makes anchoring a breeze. It gives you an easy way to let an anchor out
and a convenient way to crank it back in. It also keeps your anchor rope neat and out of the way
on the spool. It comes in black or white.
Standard model
Stainless steel model
Economy Hooker Anchor
Super Hooker Anchor
This anchor has excellent holding power in
sandy bottoms. It features a slip ring design
to ease retrieving when fouled.
This anchor features strong wide flukes that penetrate
quickly and firmly. It is preferred by many coastal
fishermen.
4
8
13
18
22
$54.99
$124.99
5
7
10
13
15
$19.99
$27.99
$44.99
$49.99
$64.99
lb.
lb.
lb.
lb.
lb.
lb.
lb.
lb.
lb.
lb.
$11.99
$14.99
$19.99
$25.99
$29.99
Navy Anchor
A good holding cast iron anchor.
Ideal for rivers and lakes with gravel or stone buttons.
Painted
5 lb.
10 lb.
15 lb.
20 lb.
Mushroom Anchor
Black vinyl coated
10 lb.
15 lb.
20 lb.
28 lb.
$7.99
$13.99
$19.99
$31.99
$18.99
$24.99
$32.99
$47.99
Ideal for anchoring in low wind and current conditions. Heavy plastisol coating (protects boat finishes)
Plastic coated
$15.99
$18.99
8 lb.
10 lb.
Plastic coated
$25.99
$31.99
15 lb.
20 lb.
Three-Strand
Twisted
Nylon Solid Braid Nylon
Anchor Line with Factory Spliced Anchor Line with
Eve with Galv. Thimble
Metal Snap
3/8"
3/8"
3/8"
1/2"
1/2"
x
x
x
x
x
50'
100'
150'
100'
150'
A.K.'s Price (Perfect for
$12.99
$21.99
$29.99
$39.99
$59.99
smaller
anchors)
A.K.'s Price
3/16" x 75'
Folding Grapnel Anchor
$7.99
River Anchor
Especially designed for river and mud bottome lakes. Great for Pontoon or bass boats.
Heavy plastisol coatings.
12
15
20
30
lb.
lb.
lb.
lb.
$19.99
$25.99
$34.99
$49.99
This unique fold-up anchor is great for small boats. It has good holding power and takes up little room.
A.K.’s price
1.5 lb. For Boats up to 10' $7.99
3 lb. For Boats up to 12' $10.99
5 lb. For Boats up to 14' $16.99
47