STC-A33A Application Manual - C-Tac

STC-A33A
Application Manual
Small Cubic Type
VGA CCD
Monochrome Analog Camera
STC-A33A
Safety Precautions
CAUTION
CAUTION
CAUTION
RISK
OF ELECTRIC
RISK OF ELECTRIC
SHOCK SHOCK
NOT OPEN
DO NOT DO
OPEN
RISK OF ELECTRIC SHOCK
DO NOT OPEN
For U.S.A.
For U.S.A.
Warning:
Warning:
!! !
For U.S.A.
Warning:
This equipment
generates
and
usesfrequency
radio frequency
This
equipment
generates
and uses
radio
energy energy
and if and if
not installed
andproperly,
used properly,
I.e.,
inaccordance
strict accordance
the
not
installed
and used
I.e., in
strict
withand
thewith
This
equipment
generates
and uses
radio
frequency
energy
if
instruction
manual,
mayharmful
cause harmful
interference
to radio
instruction
manual,
mayproperly,
cause
to radio
not installed
and used
I.e., ininterference
strict accordance
with the
communications.
It hastested
been and
tested
and to
found
to comply
communications.
It has
found
comply
with thewith the
instruction manual,
maybeen
cause harmful
interference
to radio
limits
for aAClass
A computing
device
pursuant
to Subpart
J of Part
limits
for
a Class
computing
deviceand
pursuant
of Part
communications.
It
has been tested
foundto
toSubpart
comply Jwith
the
15 ofRules,
FCC Rules, are
which
are designed
to provide
reasonable
15limits
of FCC
designed
topursuant
provide
reasonable
for a Classwhich
A computing
device
to Subpart J of Part
protection against such interference when operated in a commercial
protection
interference
when
operatedreasonable
in a commercial
15 of FCCagainst
Rules,such
which
are designed
to provide
environment.
protection against such interference when operated in a commercial
environment.
environment.
CAUTION:
CAUTION:
TO REDUCE TH E RISK OF EL ECTRIC SHOCK, DO N OT
CAUTION:
TO
REDUCE TH E RISK OF EL ECTRIC SHOCK, DO N OT
REMOVE COVER (OR BACK). NO USER SERVICEABLE
REMOVE
COVER
(OR BACK). NO USER SERVICEABLE
TO REDUCE
TH E RISK OF EL ECTRIC SHOCK, DO N OT
PARTS INSIDE.
PARTS
INSIDE.
REMOVE
COVER (OR BACK). NO USER SERVICEABLE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
PARTSSERVICING
INSIDE. TO QUALIFIED SERVICE PERSONNEL.
REFER
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
For Canada
For Canada
Warning:
For Canada
Warning:
Warning:
This digital apparatus does not exceed the Class A limits for radio
This digital
exceed
the Class
limits
forRadio
radio
noiseapparatus
emissionsdoes
fromnot
digital
apparatus
setAout
in the
This
digital
apparatus
does not
exceedset
theout
Class
A limits
noise emissions
from
digital
apparatus
in Department
the
Radio forofradio
Interference
Regulations
of the Canadian
noise
emissions
from
digital
apparatus
set
out
in
the
Radio
Interference
Regulations of the Canadian Department of
Communications.
Interference Regulations of the Canadian Department of
Communications.
Communications.
The li ghtning flash with arrowhea d
The lightning
flash with
arrowhea triangle,
d
symbol, within
an equilateral
The li ghtning
flash
with arrowhea
d
symbol,
an
equilateral
triangle,
i s within
i nt ended
t o al ert the
use r t o the
within
an equilateral
issymbol,
intended
to alert
the
use r triangle,
to“dangerous
the
pre sence
of uni
nsulated
i s sence
i nt ended
t o al ert the“dangerous
use r t o the
pre
v o lof
t a guninsulated
e ” w i t h i n t h e p r o du c t ’ s
sence
nsulated
v pre
o lta
genclosure
e ” of
w iuni
th in
e p “dangerous
rbe
o du
t ’ s ent
t hatthmay
ofc suffici
v o l t a g e ” w i t h i n t h e p r o du c t ’ s
enclosure
thatude
mayt obec onst
of sufficient
ma gnit
i tut e a ri sk of
enclosure t hat may be of suffici ent
ma gnitude
toshock
c onstitute
a risk of
electric
to persons.
ma gnit ude t o c onst i tut e a ri sk of
electric shock to persons.
electric shock to persons.
!!
The excl ama ti on poi nt wi t hi n a n
equilateral triangle
is intended
to alert
The
exclama
The excl amation
ti onpoint
poi ntwithin
wi t hi na an n
the user to the
presence toofalert
import ant
equilateral
equilateraltriangle
triangleisisintended
intended to alert
operatingpresence
and maintenance (servicing)
the
theuser
usertotothe
the presenceofofimportant
import ant
i n st r u cmaintenance
t i o ns i n t h e l i t e r a t u r e
operating
operatingand
and maintenance(servicing)
(servicing)
accompanying
the
appliance.
i ni nststr ur uc ctitoi onsns ini n t ht he e l il te
i t er ar at ut ur er e
accompanying
accompanyingthe
theappliance.
appliance.
WARNING:
WARNING:
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS APPLIANCE
TO RAIN OR MOISTURE.
TO
TOPREVENT
PREVENTFIRE
FIREOR
ORSHOCK
SHOCKHAZARD,
HAZARD,DO
DONOT
NOTEXPOSE
EXPOSE
THIS
THISAPPLIANCE
APPLIANCETO
TORAIN
RAINOR
ORMOISTURE.
MOISTURE.
Product Precautions








Handle the camera with care. Do not abuse the camera. Avoid striking or shaking it. Improper handling
or storage could damage the camera.
Do not pull or damage the camera cable.
During camera use, do not wrap he unit in any material. This will cause the internal temperature of the
unit to increase.
Do not expose the camera to moisture, or do not try to operate it in wet areas.
Do not operate the camera beyond its temperature, humidity and power source ratings.
While the camera is not being used, keep the lens or lens cap on the camera to prevent dust or
contamination from getting in the CCD or filter area and scratching or damaging this area.
Do not keep the camera under the following conditions:
 In wet, moist, and high humidity areas
 Under hot direct sunlight
 In high temperature areas
 Near an object that releases a strong magnetic or electric field
 Areas with strong vibrations
Use a soft cloth to clean the camera. Use pressured air spray to clean the surface of the glass. Do NOT
scratch the surface of the glass.
Application Manual
i
Rev1.0
STC-A33A
Contents
I. Rear Panel Specifications……………………………………………………………………….
A. 12pin Connector………………………………………………………………………….
B. DIP Switch Settings……………………………………………………………………...
C. External Sync (HD/VD) Signal Impedance Switch…………………………………...
D. Gain Switch……………………………………………………………………………….
II. Input / Output Signal Specifications…………………………………………………………...
A. Input Signal Specifications………………………………………………………………
1. External Sync Signals……………………………………………………………..
2. Trigger Signal………………………………………………………………………
B. Output Signals Specifications…………………………………………………………..
1. WEN (Write Enable) Signal……………………………………………………….
2. HD / VD signals…………………………………………………………………….
III. Camera Output Timing Charts………………………………………………………………...
A. Normal Mode (Setting: address: 10H, value: 1XX0XXXX)…………………………..
1. Horizontal Timing…………………………………………………………………..
2. Vertical Timing……………………………………………………………………..
a. Normal Full Scanning……………………………………………………..
b. Partial Full Scanning………………………………………………………
c. 1/2 Partial Scanning………………………………………………………
d. 1/4 Partial Scanning……………………………………………………….
e. Variable Partial Scanning…………………………………………………
B. Binning Mode (Setting: address: 10H, value: 1XX1XXXX)………………………….
1. Horizontal Timing…………………………………………………………………..
2. Vertical Timings……………………………………………………………………
a. Binning Full Scanning……………………………………………………..
b. Binning Partial Full Scanning……………………………………………..
c. Binning 1/2 Partial Scanning……………………………………………..
d. Binning 1/4 Partial Scanning…………………………………………….
IV. Camera Function Mode………………………………………………………………………..
A. Normal Mode……………………………………………………………………………..
1. Normal Mode (Frame Exposure)…………………………………………………
2. Normal Mode (Electronic Shutter)……………………………………………….
B. Pulse Width Trigger Mode………………………………………………………………
1. Pulse Width Trigger Mode (V-Reset)……………………………………………
2. Pulse Width Trigger Mode (Non-Reset, External Sync)……………………….
3. Pulse Width Trigger Mode (Non-Reset, Internal Sync)……………………......
4. Pulse Width Trigger Mode (Exposure Timing)………………………………….
C. Edge Preset Trigger Mode………………………………………………………….......
1. Edge Preset Trigger Mode (V-Reset)……………………………………………
2. Edge Preset Trigger Mode (Non-Reset, External Sync)………………………
3. Edge Preset Trigger Mode (Non-Reset, Internal Sync)……………………….
4. Edge Preset Trigger Mode (Exposure Timing)…………………………………
D. H Reset Mode…………………………………………………………………………….
V. Communication Protocol Specifications……………………….……………………………..
A. Communication Method…………………………………………………………………
B. Communication Settings………………………………………………………………...
C. The Communication Format…………………………………………………………….
D. The Camera Control Command………………………………………………………..
1. The Camera Command List………………………………………………………
2. Descriptions of the Camera Control Commands ………………………………
3. Camera Control Commands ………………………………………………..……
a. Normal Mode (90fps)…………………………..………………………….
b. Normal Mode (60fps)……………………………………………………...
c. Normal Mode (30fps)……………………………………………………...
d. Trigger Mode (90fps, Full scanning)…………………………………….
e. Trigger Mode (90fps, Partial full scanning)….………………………….
f. Trigger Mode (90fps, 1/2 partial scanning)…………………………….
g. Trigger Mode (90fps, 1/4 partial scanning)……………………………..
h. Trigger Mode (30fps, Variable partial scanning)……………………….
1-2
1
2
2
2
3-4
3
3
3
4
4
4
5-11
5
5
6-8
6
6
7
7
8
9-11
9
10-11
10
10
11
11
12-19
12
12
12
13-15
13
14
15
15
16-18
16
17
18
18
19
20-60
20
20
21
22-39
22-23
24-28
29-60
29
30
30
31
32
33
34
35
*continues on next page
Application Manual
ii
Rev1.0
STC-A33A
i. Trigger Mode (90fps, Binning, Full scanning)…………………………...
j. Trigger Mode (90fps, Binning, Partial full scanning)……………………
k. Trigger Mode (90fsp, Binning, 1/2 partial scanning)……………………
l. Trigger Mode (90fps, Binning, 1/4 partial scanning)…………………….
m. Trigger Mode (90fps, Binning, Variable partial scanning)…………….
n. Trigger Mode (60fps, Full scanning)………………………….…………
o. Trigger Mode (60fps, Partial full scanning)……………………………..
p. Trigger Mode (60fsp, 1/2 partial scanning)……………………………..
q. Trigger Mode (60fps, 1/4 partial scanning)……………………………...
r. Trigger Mode (60fps, Variable partial scanning)………………………..
s. Trigger Mode (60fps, Binning, Full scanning)…………………………...
t. Trigger Mode (60fps, Binning, Partial full scanning)……………………
u. Trigger Mode (60fsp, Binning, 1/2 partial scanning)……………………
v. Trigger Mode (60fps, Binning, 1/4 partial scanning)……………………
w. Trigger Mode (60fps, Binning, Variable partial scanning)………….….
x. Trigger Mode (30fps, Full scanning)………………………….………….
y. Trigger Mode (30fps, Partial full scanning)………………………………
z. Trigger Mode (30fsp, 1/2 partial scanning)………………………………
aa. Trigger Mode (30fps, 1/4 partial scanning)…………………………….
ab. Trigger Mode (30fps, Variable partial scanning)………………………
ac. Trigger Mode (30fps, Binning, Full scanning)………………………….
ad. Trigger Mode (30fps, Binning, Partial full scanning)………………….
ae. Trigger Mode (30fsp, Binning, 1/2 partial scanning)………………….
af. Trigger Mode (30fps, Binning, 1/4 partial scanning)…………………..
ag. Trigger Mode (30fps, Binning, Variable partial scanning)……………
Application Manual
iii
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
Rev1.0
STC-A33A
I. Rear Panel Specifications
A. 12 Pin Connector
B. DIP Switch
E. Manual Gain Pot
D. Gain Switch
C. External Sync (HD / VD) Signal Impedance Switch
A. 12 Pin Connector
The connector type: HR10A – 10R – 12PB (Hirose) or equivalent
No.
1
2
3
4
5
6
7
8
9
10
11
12
Signal Types
Internal Sync
External Sync
GND
GND
+12V DC
+12V DC
VIDEO GND
VIDEO GND
VIDEO OUT
VIDEO OUT
HD GND
HD GND
HD OUT
HD IN
VD OUT
VD IN
GND
GND
TXD
TXD
WEN OUT
WEN OUT
TRG IN
TRG IN
RXD (Note)
RXD (Note)
Note: Pin No.12 can be connected to GND
The camera settings can change by RS232C communication with No. 9 and 12. Please further refer to the details provided in
the user’s guide.
Application Manual
1 of 60
Rev1.0
STC-A33A
B. DIP Switch Settings
DIP Switch Settings
1
O
2
N
3
4
5
6
7
No. 1 to 3: Shutter Speed
Shutter Speed
OFF / Pulse Width Trigger
1/200 seconds
1/500 seconds
1/1,000 seconds
1/2,000 seconds
1/4,000 seconds
1/8,000 seconds
1/20,000 seconds
No.1
OFF
ON
OFF
ON
OFF
ON
OFF
ON
No.2
OFF
OFF
ON
ON
OFF
OFF
ON
ON
No. 4 to 5: Reset Mode
Reset Mode
Non-reset
V-reset
No. 4
OFF
ON
No. 5
OFF
OFF
No. 6: Trigger Polarity
Trigger Polarity
Positive (Rising Edge)
Negative (Falling Edge)
No. 6
OFF
ON
No.3
OFF
OFF
OFF
OFF
ON
ON
ON
ON
No. 7 to 8: Scanning Mode
Scanning Mode
No. 7
No. 8
Full Scanning
OFF
OFF
Full Scanning
ON
OFF
1/2 Partial Scanning
OFF
ON
1/4 Partial Scanning
ON
ON
Note: Please use the communication setting when the
system needs “Partial Full Scanning” or “Variable Partial
Scanning”
8
9
0
No. 9: Sync. System
Sync. System
External Sync.
Internal Sync.
No. 9
OFF
ON
No. 0: Binning Mode
Binning Mode
OFF
ON
No. 10
OFF
ON
C. External Sync (HD / VD) Signal Impedance Switch
External Sync Signal Impedance
75 Ω termination
ON
High impedance
OFF
D. Gain Switch
Gain Mode
Fixed Gain
Manual Gain
FIX
MANU
Note 1: The gain can be adjusted by the communication when the fixed gain is selected
Note 2: The gain can be adjusted by the pot (E) on the rear panel when the manual gain is selected.
Application Manual
2 of 60
Rev1.0
STC-A33A
II. Input / Output Signal Specifications
A. Input Signal Specifications
1. External Sync Signals
a. Signal Level:
b. Termination Impedance:
c. Signal Polarity:
2.0 to 5.0 Vp-p
75 / 10k Ω (Switch Selectable)
Negative
2-5Vp-p
d. External HD / VD signal input phase tolerance:
+/- 8.0 µseconds at 30fps
+/- 4.0 µseconds at 60fps
+/- 2.6 µseconds at 90fps
HD
VD
e. Pulse Width:
HD: 3.20 +/- 1 µseconds (Low Level)
VD: 4 to 13H (Low Level)
f. Frequency Tolerance of HD Signal: 15. 734 kHz +/- 1% at 30 fps
31.468 kHz +/- 1% at 60 fps
47.674 kHz +/- 1% at 90 fps
2. Trigger Signal
a. Signal Level:
Low Level:
High Level:
b. Termination Impedance:
0 to 0.5 Vp-p
4.0 to 5.0 Vp-p
10k Ω
4~5V
0~0.5V
c. Signal Polarity:
Rising edge (Positive) / Falling edge (Negative)
(Switch Selectable)
d. Pulse Width:
2 µseconds to 250 mseconds
Application Manual
3 of 60
Rev1.0
STC-A33A
B. Output Signals Specifications
1. WEN (Write Enable) Signal
a. Signal Level:
b. Signal Polarity:
c. Pulse Width:
3.3 Vp-p at 10k Ω termination
Negative
1H (H: Horizontal)
2. HD / VD Signals
a. Signal Level:
b. Signal Polarity:
c. Pulse Width:
Application Manual
3.3 Vp-p at 10k Ω termination
Negative
HD:
78clock (clock: pixel clock)
VD:
9H
4 of 60
Rev1.0
STC-A33A
III. Camera Output Timing Charts
A. Normal Mode (Setting: Address: 10H, Value: 1XX0XXXX)
1. Horizontal Timing
1 CLK = 81.4817 nseconds at 30 fps
1 CLK = 40.7407 nseconds at 60 fps
1 CLK = 27.1606 nseconds at 90 fps
HD
78CLK
4
CCD out
31
OB
72CLK
H-trans. Holt
16
2
DM
OB
7
648CLK
4
31
OB
659CLK
Effective pixels
1CLK
Horizontal blanking
132CLK
Video out
18CLK
60CLK
54CLK
Video output
648CLK
780CLK
One horizontal (1H)
Application Manual
5 of 60
Rev1.0
STC-A33A
2. Vertical Timing
a. Normal Full Scanning (Settings: Address: 10H, Value: 1XX00XXX; Address: 11H, Value: X000X000)
1 H = 63.5556 µseconds, 29.9700 Hz
1 H = 31.7778 µseconds, 59.9400 Hz
1 H = 21.1852 µseconds, 89.9100 Hz
525H
One vertical (1V)
VD
516H
1
2
493
494
9H
CCD out
7H
DM
OB
5
8
OB
494H
Effective pixels
2
9
Video out
31H
Vertical
blanking
494H
Video output
31H
WEN out
9H
1H
b. Partial Full Scanning (Settings: Address: 10H, Value: 1XX01XXX; Address: 11H, Value: X000X000)
1 H = 63.5556 µseconds, 31.1569 Hz
1 H = 31.7778 µseconds, 62.3138 Hz
1 H = 21.1852 µseconds, 93.4708 Hz
505H
One vertical (1V)
VD
496H
1
2
493
494
9H
Video out
11H
Vertical
blanking
494H
Video output
11H
WEN out
9H
Application Manual
1H
6 of 60
Rev1.0
STC-A33A
c. 1/2 Partial Scanning (Settings: Address: 10H, Value: 1XX01XXX; Address: 11H, Value: X000X001)
1 H = 63.5556 µseconds, 60.0544 Hz
1 H = 31.7778 µseconds, 120.108 Hz
1 H = 21.1852 µseconds, 180.163 Hz
525H
VD
(Non-reset)
One vertical (1V)
516H
9H
262H
VD
(V-reset)
One vertical (1V)
253H
376
378
135
136
9H
Video out
19H
Vertical
blanking
243H
Video output
19H
WEN out
9H
1H
d. 1/4 Partial Scanning (Settings: Address: 10H, Value: 1XX01XXX; Address: 11H, Value: X000X010)
1 H = 63.5556 µseconds, 120.108 Hz
1 H = 31.7778 µseconds, 240.217 Hz
1 H = 21.1852 µseconds, 360.326 Hz
525H
VD
(Non-reset)
One vertical (1V)
9H
516H
131H
VD
(V-reset)
One vertical (1V)
122H
303
304
201
202
9H
Video out
27H
Vertical
blanking
104H
Video output
27H
WEN out
9H
Application Manual
1H
7 of 60
Rev1.0
STC-A33A
e. Variable Partial Scanning (Settings: Address: 10H, Value: 1XX01XXX; Address; 11H, Value: X000X111)
One vertical (1V)
1068H
1V
VD
(Non-reset)
9H
1V
VD
(V-reset)
Start line
9H
One vertical (1V)
BLK_F + V_ACT + BLK_B
Effective pixels
Video out
(Non-reset)
BLK_F
Vertical blanking
V_ACT
Video output
BLK_F
Vertical blanking
V_ACT
Video output
BLK_B
Vertical blanking
Video out
(V-reset)
BLK_B
Vertical blanking
WEN out
9H
1H
Optical black
+
Dummy bit
Blanking
(Front)
CCD effective
lines
Effective
lines
Blanking
(Back)
Optical black
Application Manual
8 of 60
Rev1.0
STC-A33A
B. Binning Mode (Settings: Address: 10H, Value: 1XX1XXXX)
1. Horizontal Timing
1 CLK = 81.4817 nseconds at 30 fps
1 CLK = 40.7407 nseconds at 60 fps
1 CLK = 27.1606 nseconds at 90 fps
HD
182CLK
16
CCD out
40
OB
336CLK
H-trans. Holt
20
2 16
DM
OB
1360CLK
16
40
OB
1392CLK
Effective pixels
1CLK
Horizontal blanking
430CLK
Video out
42CLK
140CLK
248CLK
Video output
1360CLK
1790CLK
One horizontal (1H)
Application Manual
9 of 60
Rev1.0
STC-A33A
2. Vertical Timing
a. Binning Full Scanning (Settings: 10H, Value: 1XX10XXX; Address: 11H, Value: X000X000)
1 H = 63.5556 µseconds, 60.0544 Hz
1 H = 31.7778 µseconds, 120.108 Hz
1 H = 21.1852 µseconds, 180.163 Hz
262H
One vertical (1V)
VD
253H
1+2
3+4
481+482
483+484
9H
Video out
20H
Vertical
blanking
242H
Video output
20H
WEN out
9H
1H
b. Binning Partial Full Scanning (Settings: Address: 10H, Value: 1XX11XXX; Address: 11H, Value: X000X000)
1 H = 63.5556 µseconds, 58.7099 Hz
1 H = 31.7778 µseconds, 117.419 Hz
1 H = 21.1852 µseconds, 176.129 Hz
268H
One vertical (1V)
VD
253H
1+2
3+4
491+492
493+494
9H
Video out
21H
Vertical
blanking
247H
Video output
21H
WEN out
9H
Application Manual
1H
10 of 60
Rev1.0
STC-A33A
c. Binning 1/2 Partial Scanning (Settings: Address: 10H, Value: 1XX11XXX; Address: 11H, Value: X000X001)
1 H = 63.5556 µseconds, 112.387 Hz
1 H = 31.7778 µseconds, 224.775 Hz
1 H = 21.1852 µseconds, 337.162 Hz
525H
VD
(Non-reset)
One vertical (1V)
9H
516H
140H
VD
(V-reset)
One vertical (1V)
131H
135+136
137+138
373+374
375+376
9H
Video out
19H
Vertical
blanking
19H
121H
Video output
WEN out
9H
1H
d. Binning 1/4 Partial Scanning (Settings: Address: 10H, Value: 1XX11XXX; Address: 11H, Value: X000X010)
1 H = 63.5556 µseconds, 199.167 Hz
1 H = 31.7778 µseconds, 398.335 Hz
1 H = 21.1852 µseconds, 597.503 Hz
525H
VD
(Non-reset)
One vertical (1V)
9H
516H
79H
VD
(V-reset)
One vertical (1V)
70H
201+202
203+204
301+302
303+304
9H
Video out
27H
Vertical
blanking
52H
Video output
27H
WEN out
9H
Application Manual
1H
11 of 60
Rev1.0
STC-A33A
IV. Camera Function Mode
A. Normal Mode
1. Normal Mode (Frame Exposure)
Internal
VD
Exposure time
CCD
exposure
Video out
2. Normal Mode (Electronic Shutter)
Internal
VD
Exposure
time
CCD
exposure
Video out
Application Manual
12 of 60
Rev1.0
STC-A33A
B. Pulse Width Trigger Mode
In the “Pulse Width Trigger Mode” with positive polarity, the camera exposure starts at the rising edge of the trigger signal and
stops at the falling edge of the trigger signal. Therefore, in the case that the exposure positive polarity is selected, the actual
exposure occurs when the trigger signal is at its high state.
1. Pulse Width Trigger Mode (V-Reset)
Function mode
Normal mode
Trigger mode
Max. 1H
Note 2
Trigger signal
(Positive)
N ot e 1: A ut o ma t i c al l y s wi t c h e s
t o n o r ma l mo d e if t he p u l s e
w i d t h o f t h e t r i gg e r s i g na l i s
m o r e t h a n 5 0 0 ms e c .
Normal mode
Note 4
Internal VD
Note 3
CCD exposure
Exposure time
Video out
WEN signal out
Note 5
Note 1: The camera does NOT switch to normal mode when the long exposure mode is selected. The timing chart above
shows when the long exposure mode is selected.
Note 2: The internal VD signal is reset immediately after the exposure is finished as depicted above; the video
output signal is sent out according to that reset VD timing.
Note 3: The exposure time is controlled by the pulse width of the trigger signal.
Note 4: External VD signal input is continuous during the external sync mode and it is disregarded during the trigger
mode.
Note 5: The WEN signal does not output when the exposure by the trigger signal does not exist.
Application Manual
13 of 60
Rev1.0
STC-A33A
2. Pulse Width Trigger Mode (Non-Reset, External Sync)
Function mode
Normal mode
Trigger mode
1H
Normal mode
N o t e 1: Autom ati cal l y sw i tches
to nor m al m ode i f the pul se
w i dth of the tr i gger si gnal i s
m or e than 500 m sec .
Note 2
Trigger signal
(Positive)
Note 4
External VD
Note 3
CCD exposure
Exposure time
Video out
WEN signal out
Note 5
Note 1: The camera does NOT switch to the normal mode when the long exposure mode is selected. This timing chart
shows when the long exposure mode is selected.
Note 2: The internal VD signal is reset immediately after the exposure is finished. The video output signal is sent out
according to that reset VD timing.
Note 3: The exposure time is controlled by the pulse width of the trigger signal.
Note 4: External VD signal inputs continuously during the external sync mode. External VD signal is disregarded during
the trigger mode.
Note 5: The WEN signal does not output when the exposure by the trigger signal does not exist.
Application Manual
14 of 60
Rev1.0
STC-A33A
3. Pulse Width Trigger Mode (Non-Reset, Internal Sync)
Function mode
Normal mode
Note. 1
Trigger mode
Normal mode
Autom ati c al l y s w i tc hes to
nor m al m ode i f the pul s e w i dth
of the tr i gger s i gnal i s m or e
than 500 m s ec .
Trigger signal
(Positive)
N ex t
VD
N ex t
VD
Note. 2
Note. 4
Internal VD
Note. 3
CCD exposure
Exoposure time
Video out
WEN signal out
Note. 5
Note 1: The camera does NOT switch to the normal mode when the long exposure mode is selected. This timing chart
shows when the long exposure mode is selected.
Note 2: The internal VD signal does not reset by the trigger signal. The video output signal is sent out at the next VD
timing.
Note 3: The exposure time is controlled by the pulse width of the trigger signal.
Note 4: The external VD signal inputs continuously during the external sync mode.
Note 5: The WEN signal does not output when the exposure by the trigger signal does not exist.
4. Pulse Width Trigger Mode (Exposure Timing)
Trigger
singal
(127 CLK)
T1
Filtering (Note.1)
30 CLK
T1'
Exposure
time
SUB
Exposure time: T1' = T1 + 127 CLK
SG
Note 1: The trigger signal that is less than or equal to 30 clocks is removed by the filtering system.
Note 2: The Input trigger signal has to be more than 31 clocks pulse width.
Note 3: The exposure starts 63 clocks after the rising edge of the trigger signal.
Application Manual
15 of 60
Rev1.0
STC-A33A
C. Edge Preset Trigger Mode
In this “Edge Preset Trigger Mode” with positive polarity, the camera exposure starts at the rising edge of the trigger signal. In
this mode, the exposure duration time is based on the preset exposure time (shutter speed) by the camera setting
communication or the DIP Switch on the rear panel.
1. Edge Preset Trigger Mode (V-Reset)
Note. 1
Function mode
Normal mode
Trigger mode
Note. 2
Max. 1H
Trigger signal
(Rising edge)
Normal mode
Automatically switch to the normal
mode if the pulse width of the
trigger signal is more than
500 mseconds
Note. 4
Internal VD
Note. 3
CCD exposure
Exposure time
Video out
WEN signal out
Note. 5
Note 1: The camera does NOT switch to the normal mode when the long exposure mode is selected. This timing chart shows
when the long exposure mode is selected.
Note 2: The internal VD signal is reset immediately after the exposure is finished; the video output signal is sent out according
to that reset VD timing.
Note 3: The exposure time is controlled by the camera setting communication (Refer to the command 20H and 21H) or the
DIP Switch on the rear panel as “shutter speed”.
Note 4: External VD signal inputs continuously during the external sync mode. External VD signal is disregarded during the
trigger mode.
Note 5: The WEN signal does not output when the exposure by the trigger signal does not exist.
Application Manual
16 of 60
Rev1.0
STC-A33A
2. Edge Preset Trigger Mode (Non-Reset, External Sync)
Note. 1
Function mode
Normal mode
Trigger mode
Note. 2
Max. 1H
Normal mode
Automatically switch to the normal
mode if the pulse width of the
trigger signal is more than
500 mseconds
Trigger mode
(Rising edge)
Note. 4
Internal VD
Note. 3
CCD exposure
Exposure time
Video out
WEN signal out
Note. 5
Note 1: The camera does NOT switch to normal mode when the long exposure mode is selected.
This timing chart shows when the long exposure mode is selected.
Note 2: The internal VD signal is reset immediately after the exposure is finished; the video output signal is sent out
according to the timing of the VD being reset.
Note 3: The exposure time is controlled by the camera setting communication (Refer to the command 20H and 21H) or
the DIP Switch on the rear panel as “shutter speed”.
Note 4: External VD signal inputs continuously during the external sync mode. The external VD signal is disregarded
during the trigger mode.
Note 5: The WEN signal does not output when the exposure by the trigger signal does not exist.
Application Manual
17 of 60
Rev1.0
STC-A33A
3. Edge Preset Trigger Mode (Non-Reset, Internal Sync)
Function mode
Normal mode
Note. 1
Trigger mode
Normal mode
Automatically switches to the
normal mode if the pulse width
of the trigger signal is more
than 500 msec
Trigger signal
(Rising edge)
Next
VD
Next
VD
Note. 2
Next
VD
Internal VD
Note. 3
CCD exposure
Exposure time
Video out
WEN signal out
Note. 4
Note 1: The camera does NOT switch to the normal mode when the long exposure mode is selected. This timing chart
shows when the long exposure mode selected.
Note 2: The internal VD signal does not reset by the trigger signal. The video output signal is sent out at the next internal
reset VD timing.
Note 3: The exposure time is controlled by the camera setting communication (Refer to the command 20H and 21H) or
the DIP Switch on the rear panel as “shutter speed”.
Note 4: External VD signal input continuously during the external sync mode. External VD signal is disregarded during
the trigger mode.
Note 5: The WEN signal does not output when the exposure by the trigger signal does not exists during the trigger mode.
4. Edge Preset Trigger Mode (Exposure Timing)
Trigger
signal
Filtering (Note.1)
30CLK
T1'
Exposure
time
SUB
Exposure time: T1' =
Preset exposure time for the electronic shutter
SG
Notes:
 The trigger signal equals to or shorter than 30 clocks is removed by the filtering system.
 The input trigger signal has to be more than 31 clocks pulse width.
 The exposure starts 63 clocks after the rising edge of the trigger signal.
Application Manual
18 of 60
Rev1.0
STC-A33A
D. H Reset Mode
Normally, the video noise appears when the start of the trigger signal is applied before finishing the video out of the previous
frame. This noise is caused by the SUB pulse, which is activated to clear all residual charges on the CCD prior to a new
exposure. By selecting “H reset mode”, the camera automatically holds the actual activation of the trigger until the next
horizontal blanking period. By doing this, the SUB pulse is activated during the horizontal blanking period and the noise in the
image can be avoided.
Note: Due to the principal of this operation, there can be a maximum 1H of delay of the actual trigger signal.
Trigger signal
(Rising edge)
Next HD
Internal HD
Normal SUB pulse timing
SUB pulse
CCD exposure
Noise
Video out
Application Manual
19 of 60
Rev1.0
STC-A33A
V. Communication Protocol Specifications
This camera has a communication function that enables external devices, such as the PC, to control the camera functions and
parameters. Use the “CLCtrl” communication software (version 9.0 or later) to communicate, or follow the communication protocol
described below to communicate with the camera.
Note: A communication problem may occur under the following conditions:
 When the external sync frequency is out of the specification (more than 1% off from the specified normal frequency)
 When external sync is unstable.
 Approximately for one second after changing the sync mode.
 Approximately for one second after switching the frame rate.
A. Communication Method
UART (RS232C)
B. Communication Settings
Settings
Baud Rate
Data Bit
Parity
Stop Bit
Flow Control
Application Manual
9,600 bps / 38,400 bps
8 bit
None
1 bit
None
20 of 60
Rev1.0
STC-A33A
C. The Communication Format
1. Sending Data Format from the PC to the Camera is shown below:
a. Sending the read command:
SOF
8 bit
(always 02H)
Device Code
Read / Write
Page Selection
Command Code
Data Length
Data
EOF
6 bit
1 bit
(always 00H)
1 bit
8 bit
8 bit
8 bit
8 bit
(always 03H)
Data
Data
Length
Byte
b. Sending the write command:
SOF
Device Code
Read / Write
Page Selection
Command Code
Data Length
8 bit
(always 02H)
6 bit
1 bit
(always 01H)
1 bit
8 bit
8 bit
EOF
8 bit
(always 03H)
2. Receiving data format from the camera is as below:
a. After sending the reading command:
SOF
Data Length
Data
EOF
8 bit (always 02H)
8 bit
Data Length Byte
8 bit (always 03H)
b. After sending the write command:
SOF
Data Length
Data
EOF
8 bit (always 02H)
8 bit (always 00H)
8 bit
8 bit (always 03H)
3. Descriptions of the Format:
Name
Descriptions
SOF
Start of the frame. The set (or receive) value is always “02H”
Device Code
Read / Write
This indicates the destination of the communication
The device code for the camera is “000000”. Other codes are the peripheral devices.
This specifies “Read” or “Write” to command numbers. Set 0 for “Read” and 1 for “Write”.
This specifies page selection (access selection) to registers and EEPROM of command.
Set 0 to access the command register of the camera.
Read command: To read the current data from the command register.
Write command: To set the data into the command register. The data in the EEPROM is not replaced.
Page Selection
Set 1 to access the EEPROM of the camera
Read command: To read the data from the EEPROM
Write command: To save the data into the EEPROM as default data
Notes:
1. The camera operates with the data in the EEPROM when the camera is powered on.
2. The camera returns the receiving code “01H” to the PC after save the data into the EEPROM. The camera rejects any commands
during the data saved (approximately 5 mseconds / byte) and returns the receiving code “07H” (busy) to the PC.
Command Code
This indicates the command. Refer to the following page for the details.
This indicates the data length (Unit is byte).
Data Length
Sending data: Set to 0 when sending the read command. The data length is dependent on each write command when sending the write
command.
Receiving data: The data length is dependent on each write command after sending the read command.
Receive “00H” after sending the write command.
Receive “00H” when an error has occurred.
Data
This indicates write data or read data according to the command type.
EOF
End of the frame. The set (or receive) value is always “03H”
This indicates result of the sending command:
Receiving Code
01H: Receiving OK (ACK)
07H: The camera is in process (Busy)
Application Manual
10H: Receiving problem (NAC)
11H: Communication problem
21 of 60
Rev1.0
STC-A33A
D. The Camera Control Command
1. The Camera Command List
Notes:

The data unit of each command is 1 byte (8bit).

The data can be saved to the EEPROM if there is “X” in the “Save to EEPROM” column in the below list.

The camera initializes based on the stored data in the EEPROM when the power is applied.
Command
No.
Read / Write
Save to
EEPROM
Initial
Data
Function
Data
Range
00H
Read
Product code (8bit: D[7…0])
17
-
01H
Read
Hardware version (8bit: D[7…0])
ROMdata
-
02H
Read
Firmware version (16bit: D[15…8])
D[15…12]: The integer, D[11…8]: 1st place of the decimal
-
Read
Firmware version 16bit D[7…0])
D[7…4]: 2nd place of the decimal,
D[3…0]: 3rd place of the decimal
ROMdata
03H
04H
Read / Write
X
Serial number (32bit: D[31…24])
D[31…28]: 0, D[27…24]: 7th figure
05H
Read / Write
X
Serial number (32bit: D[23…16])
D[23…20]: 6th figure, D[19…16]: 5th figure
The factory
set value
-
Serial number (32bit: D[8…0])
D[7…4]: 2nd figure, D[3…0]: 1st figure
Customer Code (8bit: D[7…0])
0
-
Reserved (Please do not use these)
-
-
Serial number (32bit: D[15…8])
D[15…12]: 4th figure, D[11…8]: 3rd figure
06H
Read / Write
X
07H
Read / Write
X
08H
Read / Write
X
09 to 0CH
Read / Write
0DH
Read / Write
X
The factory adjusted DAC reference voltage value (Back up Data)
(8bit: D[7…0])
0EH
Read / Write
X
The factory adjusted the digital gain value (Backup data) (8bit: D[7…0])
0FH
Read / Write
X
The factory adjusted gain offset value (Backup Data) (8bit: D[7…0])
10H
Read / Write
X
The camera function mode 1 (8bit: D[7…0])
The factory
adjusted value
The factory
adjusted value
The factory
adjusted value
1
11H
Read / Write
X
The camera function mode 2 (8bit: D[7…0])
0
12H
Read / Write
X
The camera function mode 3 (8bit: D[7…0])
0
13H
Read / Write
X
The camera function mode 4 (8bit: D[7…0])
0
14H
Read / Write
X
The communication mode (8bit: D[7…0])
0
Reserved (Please do not use these)
-
-
0
0 to
4095
0
0 to 779
0
0 to 493
494
0 to 494
15 to 1FH
0 to 255
0 to 63
20H
Read / Write
X
The exposure time (H) of the electronic shutter (16bit: D[7…0])
21H
Read / Write
X
The exposure time (H) of the electronic shutter (16bit: D[15…8])
22H
Read / Write
X
The exposure time (CLK) of the electronic shutter (16bit: D[7…0])
23H
Read / Write
X
The exposure time (CLK) of the electronic shutter (16bit: D[15…8])
24H
Read / Write
X
The start line of the variable partial scanning (16bit: D[7…0])
25H
Read / Write
X
The start line of the variable partial scanning (16bit: D[15…8])
26H
Read / Write
X
The effective lines of the variable partial scanning 916bit: D[7…0])
27H
Read / Write
X
The effective lines of the variable partial scanning (16bit: D[15…8])
28H
Read / Write
X
The delay time of the trigger (8bit: D[7…0])
0
0 to 31
Reserved (Please do not use these)
-
-
0
The value of
0EH address
0 to 255
29 to 2FH
30H
31H
Read / Write
X
CDS gain (8bit: D[7…0])
Read / Write
X
The digital gain (8bit: D[7…0])
Application Manual
22 of 60
-
Rev1.0
STC-A33A
Command
No.
32H
Read / Write
Read / Write
Save to
EEPROM
X
33 to 37H
38H
-
Reserved (Please do not use these)
Initial
Data
The value of
0FH address
-
The clamp level (8bit: D[7…0])
4
0 to 31
Function
The gain offset (6bit: D[5…0])
Data
Range
-
Read / Write
X
Reserved (Please do not use these)
-
-
60H
Read / Write
X
Control selection (Rear panel / communication) 98bit: D[7…0])
-
61H
Read / Write
X
DAC reference voltage (8bit: D[7…0])
0
The value of
0DH address
62H
Read / Write
X
Fixed gain value for the rear panel (8bit: D[7…0])
16
0 to 255
63 to 64H
Read / Write
X
Maximum setting of the pot on the rear panel (16bit: D[15…0])
422
Reserved (Please to do not use these)
-
0 to
65535
-
39 to 5FH
65 to 6FH
-
70 to 71H
Read
The current selection on the rear panel (1 bit: D[15])
-
-
72H
Read
The current gain value 98bit: D[7…0])
-
-
Reserved (Please do not use these)
-
-
Status of the DIP switch on the rear panel (10bit: D[9…0])
-
-
Reserved (Please do not use these)
Firmware version verification (16bit: D[15…8])
D[15…12]: The integer, D[11…8]: 1st place of the decimal
Firmware version verification (16bit: D[7…0])
D[7…4]: 2nd place of the decimal, D[3…0]: 3rd place of the decimal
EEPROM control (8bit: D[7…0])
The value of
02H address
The value of
03H address
0
-
Reserved (Please do not use these)
-
-
73H
74 to 75H
Read
76 to 7DH
7EH
Read / Write
X
7FH
Read / Write
X
80H
Read / Write
81 to FFH
Application Manual
23 of 60
0 to 3
Rev1.0
STC-A33A
2. Descriptions of the Camera Control Commands (The underline settings are factory default settings)
Command No.
Command Descriptions
0DH:
DAV_BK[7…0]
[Back up data of the factory adjusted value for DAC reference voltage]
This data is the factory adjusted DAC reference voltage that is set to the address 61H.
0EH:
DGB_BK[7…0]
[Back up data of the factory adjusted value for the digital gain]
This data is the factory adjusted digital gain that is set to the address 31H.
0FH:
GOFS_BK[7…0]
[Back up data of the factory adjusted value for the gain offset]
This data is the factory adjusted gain offset that is set to the address 32H.
[The camera function mode1] Initial data: MOD1[7…0] = 1
This sets the below camera function modes.
D[7…0]
D7
D6
10H:
MOD1[7…0]
D7:
D6:
D5:
D4:
D3:
D2 to D0:
D5
D4
D3
D2
Long exposure mode
Trigger polarity
Trigger mode
Binning mode
Scanning method
Reset mode
D1
D0
0:OFF
0: Positive
0: Edge preset
0: OFF (Normal)
0: Full scanning
000: Non-Reset
1: ON
1: Negative
1:Pulse width
1: ON (Binning)
1:Partial Scanning
001: V-Reset
010 to 111: No function
(Prohibited setting. Do not set these values)
11H:
MOD2[7…0]
[The camera function mode 2] Initial data: MOD2[7…0] = 0
This sets the below camera function modes.
D[7…0]
D7
D6
D5
D4
D3
D2
D7:
D6 to D5:
Sync system
Frame rate
D4:
D3:
D2 to D0:
No function
Function mode (Caution)
Scanning mode
D1
D0
0: HD/VD signal in (External)
1: HD/VD signal out (Internal)
00: 60 fps
01: 90 fps
10: 30 fps
11: 60 fps
Always set “0”
0: Trigger
1: Normal
000: Full scanning
001: 1/2 partial scanning
010: 1/4 partial scanning
111: Variable partial scanning
011 to 110: No function
(Prohibited setting. Do not set these values)
Caution: 10H. D7, long exposure mode setting and this 11H.D3, function mode, interrelates to each other and
the combinations of both settings determine final operation modes of the camera. The functions of the cameras
determined by these two settings are summarized as below:
10H.D7
Long exposure
1: ON
1: ON
0: OFF
0: OFF
11H.D3
Function mode
0: Trigger
1: Normal
0: Trigger
1: Normal
Operational mode
Trigger mode with the long exposure enable
Normal (continuous) mode
Trigger mode without long exposure enable (Note)
Trigger mode without long exposure enable (Note)
Note: The camera goes into the normal (continuous) mode automatically when the trigger input lasts more than
500 mseconds.
Application Manual
24 of 60
Rev1.0
STC-A33A
Command No.
Command Descriptions
[The camera function mode 3] Initial data: MOD3[7…0] = 0
This sets the following camera function modes.
D[7…0]
D7
D6
12H:
MOD3[7…0]
D5
D4
D3
D2
D7 to D5:
D4 to D3
No function
Exposure start mode
D2:
D1 to D0:
No function
Gamma mode
D1
D0
Always set “000”
00: Normal
10 to 11 reset,
01: No function (Prohibited setting. Do not set these values)
Always set “0”
00: 1.0
01: 0.45
10 to 11: 1.0
[The camera function mode 4] Initial data: MOD4[7…0] =1
This sets the following camera function modes.
D[7…0]
D7
D6
13H:
MOD4[7…0]
D7 to D4:
D3 to D0:
D5
D4
D3
D2
D1
D0
Set always “0000”
0111: 7CLK
0110: 6CLK
0011: 3CLK
0010:2CLK
1111: -1CLK,
1110:-2CLK
1011: -5CLK
1010:-6CLK
No function
External sync
phase adjust
0101: 5CLK
0001: 1CLK
1101: -3CLK
1001: -7CLK
0100: 4CLK
0000: 0CLK
1100: -4CLK
1000: -8CLK
[The communication mode] Initial data: UART[7…0] = 0
This sets the following camera function modes.
14H:
UART[7…0]
D[7…0]
D7
D6
D7 to D2:
D1 to D0:
D5
D4
No function
Baud rate
D3
D2
D1
D0
Always set “000000”
00: 38,400bps
01: 9,600bps
10 to 11: No function
(Prohibited setting. Do not set these values)
[The exposure time (H) of the electronic shutter]
Initial data: SVR[15…0] = 0, data range: 0 to 4095
This and SHR[15…0] set the preset shutter speed (or CCD exposure time) for the electronic shutter.
20H:
SVR[7…0]
21H:
SVR[15…8]
Application Manual
The preset shutter speed is defined by the following formula:
Preset Shutter Speed = SVR[15…0] x (1H cycle time) + SHR[15…0] x (1CLK cycle time)
Notes:
1. The data in 20H through 23H reflects to the present shutter speed.
2. The camera works with the shutter off (maximum shutter speed) when both SVR[] and SHR[] are set to 0.
3. The camera works with the minimum shutter speed when this value is set to 0 and SHR[] is set between 1
and 306.
4. The value replaces by 4095 automatically when this value is set to greater than 4095.
25 of 60
Rev1.0
STC-A33A
Command No.
Command Descriptions
[The exposure time (CLK) of the electronic shutter]
Initial data: SHR [15…0] = 0, data range: 0 to 779
This and SVR[15…0] set the preset shutter speed (or CCD exposure time) for the electronic shutter.
22H:
SHR[7…0]
23:
SHR[15…8]
24H:
PSR[7…0]
25H:
PSR[15…8]
26H:
PWR[7…0]
27H:
PWR[15…8]
The preset shutter speed is defined by the following formula:
Preset Shutter Speed = SVR[15…0] x (1H cycle time) + SHR[15…0] x (1CLK cycle time)
Notes:
1. The data in 20H through 23H reflects to the preset shutter speed.
2. The camera works with the shutter off (maximum shutter speed) when both SVR[] and SHR[] are set at 0.
3. The camera works with the minimum shutter speed when this value is set between 1 and 306 and SHR[] is
set to 0.
4. The value replaces by 779 automatically when this value is set to greater than 779.
[The start line of the variable partial scanning]
Initial data: PSR[15…0] =, data range: 0 to 493
This sets the start line number of the variable partial scanning area.
Actual start line of the variable partial scanning = this value + 1
Notes:
1. The camera works with full scanning when the value of (PSR[] + PSW[]) is greater than 494.
2. The value replaces by 493 automatically when this value is set greater than 493.
[The total effective line numbers in the variable partial scanning]
Initial data: PWR[15…0] = 494, data range: 0 to 494
The sets the number of the total effective lines (the image height) in the variable partial scanning.
Notes:
1. The camera works with full scanning when the value of (PSR[] + PSW[]) is greater than 494 or this value is
set to 0.
2. The value is replaced by 494 automatically when this value is set to greater than 494.
[The delay time for the trigger] Initial data: DLY[7…0] = 0, data range: 0 to 31
This sets the delay time for the input trigger signal to the start of the exposure.
28H:
DLY [7…0]
Delay time is defined by the following formula:
Delay Time = 148CLK x DLY[7…0] ( Unit is useconds)
Note: CLK = pixel clock time is useconds
[The CDS gain] Initial data; PGA[7…0] = , data range: 0 to 255
This sets the CDS gain, which is the programmable gain.
30H:
PGA[7…0]
CDS gain is defined by the following formula:
CDS Gain = 3.64 + 0.132 x (PGA[7…0] + GOFS[7…0]) (Unit is dB)
The analog gain of CCD output is defined by the DCS gain as shown below:
Analog gain = pre-amp (6 dB) + CDS gain (Unit is dB)
Application Manual
26 of 60
Rev1.0
STC-A33A
Command No.
Command Descriptions
[The digital gain] Initial data: DGB[7…0] = The value in the address 0EH, data range: 0 to 255.
This sets the digital gain.
31H:
DGB[7…0]
The video output level is defined by the following formula:
Video output level = (Input video level –CLAMP[7…0] x (1 + (DGB[7…0] / 128) + CLAMP [7…0])
Notes:
1. GOFS[7…0]: The gain offset, which is the value in the address 32H.
2. CLAMP[7…0]: The clamp level, which is the value in the address 38H.
32H:
GOFS[7…0]
[The gain offset] Initial data: GOFS[7…0] = The value in the address 0FH, data range: 0 to 63
This sets the gain offset.
38H:
CLAMP[7…0]
[The clamp level] Initial data: CLAMP[7…0] = The value in the address 0FH, data range: 0 to 63.
This sets the gain offset.
[Control selection (Rear panel / communication)] Initial data: SWCOM[7…0] = 0
This sets the following control selections.
D[7…0]
D7
D6
60H:
SW COM[7…0]
61H:
DA_VREF[7…0]
62H:
FIX_GAIN[7…0]
D7 to D2:
D1:
D0:
D5
D4
D3
D2
D1
D0
Always set “000000”
0: DIP switch on the camera
1: Communication
0: Enable
(Gain mode is selectable by the switch on the rear panel)
1: Disable
(Fixed gain is adjustable by the communication)
No function
Control selection
Gain switch
[DAC reference voltage]
Initial data: DA_VREF[7…0] = the value of the address 0DH, data range: 0 to 255
This sets the reference voltage for the DAC.
[Fixed gain for the rear panel] Initial data: FIX_GAIN[7…0] = 16, data range: 0 to 255
This sets the gain for the fixed gain on the rear panel.
0:6.544 dB, 255: 40,204 dB
63H:
VR_MAX[15…8]
64H:
VR_MAX[7…0]
[Maximum setting of the pot on the rear panel]
Initial data: VR_MAX[15…0] = 422, data range: 0 to 65535
This sets the maximum gain for the pot on the rear panel for the manual gain.
[The current gain selection on the rear panel / the current pot position on the rear panel]
This obtains the status of the gain selection and manual gain on the rear panel.
70H:
GAIN[15…8]
71H:
GAIN[7…0]
Application Manual
D[15…0]
D15 D14
D15:
D14 to D0:
D13
D12
Gain mode
Manual gain
D11
D10
D9
0:Manual gain
27 of 60
D8
D7
D6
D5
D4
D3
D2
D1
D0
1: Fixed gain
Rev1.0
STC-A33A
Command No.
Command Descriptions
[Status of the DIP switch on the rear panel]
This obtains the status of the DIP switch on the rear panel.
D[9…0]
D9
D8
74H:
DSW_ST[9…8]
75H:
DSW_ST[7…0]
7EH:
FWVR[15…8]
7FH:
FWVR[7…0]
D7
D6
D5
D9:
D8:
D7 to D6:
Binning mode
Sync system
Scanning mode
D5:
D4 to D3:
D2 to D0:
Trigger polarity
Reset mode
Shutter speed
D4
D3
D2
D1
D0
0: ON (Binning)
0: HD/ VD signals in (External)
00: 1/4 partial scanning
10 to 11: Full scanning
0: Negative
10: V-Reset
000: 1/20,000 seconds
010: 1/4,000 seconds
100: 1/1000 seconds
110: 1/200 seconds
111: Shutter off, pulse width trigger
1: OFF (Normal)
1: HD/VD signals out (Internal)
01: 1/2 partial scanning
1: Positive
11: Non-Reset
001: 1/8000 seconds
011: 1/2000 seconds
101: 1/500 seconds
[Firmware version verification] Initial data: FWVR[15..0] = Firmware version
This is used for the firmware version verification when the camera is powered on.
The data of the address 10H to 7FH on the EEPROM are initialized with the factory default if this and the value
on the register are not equal.
[EEPROM control] Initial data: E2P[7…0] = 0
This sets the EEPROM control mode.
D[7…0]
D7
D6
80H:
E2P[7…0]
Application Manual
D7 to D2:
D1:
D0:
D5
D4
D3
D2
D1
D0
No function
Always set “000000”
Register simultaneously updates with the EEPROM
0: Prohibited
1: Permitted
Writing control into EEPROM
0: Prohibited
1: Permitted
Note 1: This bit is cleared to 0 automatically by the internal process after the execution of the
command
Note 2: By synchronizing to the EEPROM read/write access, the subject control register is also
updated.
28 of 60
Rev1.0
STC-A33A
3. Camera Control Commands (The camera function modes: address 10H, 11H, 12H)
a. Normal Mode (90fps)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
0.45
1.0
Partial full
scanning
0.45
1.0
1/2 partial
scanning
0.45
1.0
1/4 partial
scanning
0.45
1.0
Variable
partial
scanning
Normal
Gamma
1.0
Full
Scanning
OFF
Exposure
Start Mode
0.45
90fps
1.0
Full
scanning
0.45
1.0
Partial
scanning
ON
0.45
1.0
1/2 partial
scanning
0.45
1.0
1/4 partial
scanning
0.45
Variable
partial
scanning
Application Manual
1.0
0.45
29 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
80H
88H
90H
98H
Settings
11H
A8H
28H
A8H
28H
A8H
28H
A8H
28H
A9H
29H
A9H
29H
AAH
2AH
AAH
2AH
AFH
2FH
AFH
2FH
A8H
28H
A8H
28H
A8H
28H
A8H
28H
A9H
29H
A9H
29H
AAH
2AH
AAH
2AH
AFH
2FH
AFH
2FH
12H
00H
01H
00H
01H
00H
01H
00H
01H
00H
01H
00H
01H
00H
01H
00H
01H
00H
01H
00H
01H
Rev1.0
STC-A33A
b. Normal Mode (60fps)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
0.45
1.0
Partial full
scanning
0.45
1.0
1/2 partial
scanning
0.45
1.0
1/4 partial
scanning
0.45
1.0
Variable
partial
scanning
Normal
Gamma
1.0
Full
Scanning
OFF
Exposure
Start Mode
0.45
60fps
1.0
Full
scanning
0.45
1.0
Partial
scanning
ON
0.45
1.0
1/2 partial
scanning
0.45
1.0
1/4 partial
scanning
0.45
1.0
Variable
partial
scanning
Application Manual
0.45
30 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
80H
88H
90H
98H
Settings
11H
88H
08H
88H
08H
88H
08H
88H
08H
89H
09H
89H
09H
8AH
0AH
8AH
0AH
8FH
0FH
8FH
0FH
88H
08H
88H
08H
88H
08H
88H
08H
89H
09H
89H
09H
8AH
0AH
8AH
0AH
8FH
0FH
8FH
0FH
12H
00H
01H
00H
01H
00H
01H
00H
01H
00H
01H
00H
01H
00H
01H
00H
01H
00H
01H
00H
01H
Rev1.0
STC-A33A
c. Normal Mode (30fps)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
0.45
1.0
Partial full
scanning
0.45
1.0
1/2 partial
scanning
0.45
1.0
1/4 partial
scanning
0.45
1.0
Variable
partial
scanning
Normal
Gamma
1.0
Full
Scanning
OFF
Exposure
Start Mode
0.45
30fps
1.0
Full
scanning
0.45
1.0
Partial
scanning
ON
0.45
1.0
1/2 partial
scanning
0.45
1.0
1/4 partial
scanning
0.45
1.0
Variable
partial
scanning
Application Manual
0.45
30 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
80H
88H
90H
98H
Settings
11H
C8H
48H
C8H
48H
C8H
48H
C8H
48H
C9H
49H
C9H
49H
CAH
4AH
CAH
4AH
CFH
4FH
CFH
4FH
C8H
48H
C8H
48H
C8H
48H
C8H
48H
C9H
49H
C9H
49H
CAH
4AH
CAH
4AH
CFH
4FH
CFH
4FH
12H
00H
01H
00H
01H
00H
01H
00H
01H
00H
01H
00H
01H
00H
01H
00H
01H
00H
01H
00H
01H
Rev1.0
STC-A33A
d. Trigger Mode (90fps, Full scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
90fps
OFF
0.45
Full
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
31 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
80H
C0H
81H
C1H
A0H
E0H
A1H
E1H
Settings
11H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
e. Trigger Mode (90fps, Partial full scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
90fps
OFF
0.45
Partial full
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
32 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
88H
C8H
89H
C9H
A8H
E8H
A9H
E9H
Settings
11H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
f. Trigger Mode (90fps, 1/2 partial scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
90fps
OFF
0.45
1/2 partial
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
33 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
88H
C8H
89H
C9H
A8H
E8H
A9H
E9H
Settings
11H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
g. Trigger Mode (90fps, 1/4 partial scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
90fps
OFF
0.45
1/4 partial
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
34 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
88H
C8H
89H
C9H
A8H
E8H
A9H
E9H
Settings
11H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
h. Trigger Mode (90fps, Variable partial scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
90fps
OFF
0.45
Variable
partial
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
35 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
88H
C8H
89H
C9H
A8H
E8H
A9H
E9H
Settings
11H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
i. Trigger Mode (90fps, Binning, Full scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
90fps
ON
0.45
Full
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
36 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
90H
D0H
91H
D1H
B0H
F0H
B1H
F1H
Settings
11H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
j. Trigger Mode (90fps, Binning, Partial full scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
90fps
ON
0.45
Partial full
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
37 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
98H
D8H
99H
D9H
B8H
F8H
B9H
F9H
Settings
11H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
A0H
20H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
k Trigger Mode (90fps, Binning, 1/2 partial scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
90fps
ON
0.45
1/2 partial
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
38 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
98H
D8H
99H
D9H
B8H
F8H
B9H
F9H
Settings
11H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
A1H
21H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
l. Trigger Mode (90fps, Binning, 1/4 partial scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
90fps
ON
0.45
1/4 partial
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
39 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
98H
D8H
99H
D9H
B8H
F8H
B9H
F9H
Settings
11H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
A2H
22H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
m. Trigger Mode (90fps, Binning, Variable partial scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
90fps
ON
0.45
Variable
partial
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
40 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
98H
D8H
99H
D9H
B8H
F8H
B9H
F9H
Settings
11H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
A7H
27H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
n. Trigger Mode (60fps, Full scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
60fps
OFF
0.45
Full
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
41 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
80H
C0H
81H
C1H
A0H
E0H
A1H
E1H
Settings
11H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
o. Trigger Mode (60fps, Partial full scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
60fps
OFF
0.45
Partial full
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
42 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
88H
C8H
89H
C9H
A8H
E8H
A9H
E9H
Settings
11H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
p. Trigger Mode (60fps, 1/2 partial scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
60fps
OFF
0.45
1/2 partial
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
43 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
88H
C8H
89H
C9H
A8H
E8H
A9H
E9H
Settings
11H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
q. Trigger Mode (60fps, 1/4 partial scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
60fps
OFF
0.45
1/4 partial
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
44 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
88H
C8H
89H
C9H
A8H
E8H
A9H
E9H
Settings
11H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
r. Trigger Mode (60fps, Variable partial scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
60fps
OFF
0.45
Variable
partial
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
45 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
88H
C8H
89H
C9H
A8H
E8H
A9H
E9H
Settings
11H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
s. Trigger Mode (60fps, Binning, Full scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
60fps
ON
0.45
Full
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
46 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
90H
D0H
91H
D1H
B0H
F0H
B1H
F1H
Settings
11H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
t. Trigger Mode (60fps, Binning, Partial full scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
60fps
ON
0.45
Partial full
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
47 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
98H
D8H
99H
D9H
B8H
F8H
B9H
F9H
Settings
11H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
80H
00H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
u. Trigger Mode (60fps, Binning, 1/2 partial scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
60fps
ON
0.45
1/2 partial
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
48 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
98H
D8H
99H
D9H
B8H
F8H
B9H
F9H
Settings
11H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
81H
01H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
v. Trigger Mode (60fps, Binning, 1/4 partial scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
60fps
ON
0.45
1/4 partial
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
49 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
98H
D8H
99H
D9H
B8H
F8H
B9H
F9H
Settings
11H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
82H
02H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
w. Trigger Mode (60fps, Binning, Variable partial scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
60fps
ON
0.45
Variable
partial
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
50 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
98H
D8H
99H
D9H
B8H
F8H
B9H
F9H
Settings
11H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
87H
07H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
x. Trigger Mode (30fps, Full scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
30fps
OFF
0.45
Full
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
51 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
80H
C0H
81H
C1H
A0H
E0H
A1H
E1H
Settings
11H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
y. Trigger Mode (30fps, Partial full scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
30fps
OFF
0.45
Partial full
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
52 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
88H
C8H
89H
C9H
A8H
E8H
A9H
E9H
Settings
11H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
z. Trigger Mode (30fps, 1/2 partial scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
30fps
OFF
0.45
1/2 partial
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
53 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
88H
C8H
89H
C9H
A8H
E8H
A9H
E9H
Settings
11H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
aa. Trigger Mode (30fps, 1/4 partial scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
30fps
OFF
0.45
1/4 partial
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
54 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
88H
C8H
89H
C9H
A8H
E8H
A9H
E9H
Settings
11H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
ab. Trigger Mode (30fps, Variable partial scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
30fps
OFF
0.45
Variable
partial
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
55 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
88H
C8H
89H
C9H
A8H
E8H
A9H
E9H
Settings
11H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
ac. Trigger Mode (30fps, Binning, Full scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
30fps
ON
0.45
Full
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
56 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
90H
D0H
91H
D1H
B0H
F0H
B1H
F1H
Settings
11H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
ad. Trigger Mode (30fps, Binning, Partial full scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
30fps
ON
0.45
Partial full
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
57 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
98H
D8H
99H
D9H
B8H
F8H
B9H
F9H
Settings
11H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
C0H
40H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
ae. Trigger Mode (30fps, Binning, 1/2 partial scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
30fps
ON
0.45
1/2 partial
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
58 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
98H
D8H
99H
D9H
B8H
F8H
B9H
F9H
Settings
11H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
C1H
41H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
af. Trigger Mode (30fps, Binning, 1/4 partial scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
30fps
ON
0.45
1/4 partial
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
59 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
98H
D8H
99H
D9H
B8H
F8H
B9H
F9H
Settings
11H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
C2H
42H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
ag. Trigger Mode (30fps, Binning, Variable partial scanning)
Function
Mode
Frame
rate
Binnig
Scanning
Method
Trigger Mode
Reset Mode
Trigger
Polarity
Exposure
Start Mode
Gamma
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Edge preset
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
Trigger
30fps
ON
0.45
Variable
partial
scanning
1.0
Normal
0.45
Positive
1.0
H reset
0.45
Non-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Pulse width
1.0
Normal
0.45
Positive
1.0
H reset
0.45
V-Reset
1.0
Normal
0.45
Negative
1.0
H reset
0.45
Application Manual
60 of 60
Sync
System
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
Internal
External
10H
98H
D8H
99H
D9H
B8H
F8H
B9H
F9H
Settings
11H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
C7H
47H
12H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
00H
01H
10H
11H
Rev1.0
STC-A33A
Revision
Rev
1.0
Application Manual
Date (D/M/Y)
2/9/2008
Changes
New Document
Name
Sam Aimono
Notes
Rev1.0
STC-A33A
Sensor Technologies America, Inc.
1345 Valwood Pkwy, Suite 320
Carrollton, Texas 75006-6891
TEL (972) 481-9223 FAX (972) 481-9209
URL http://www.sentechamerica.com/
Sensor Technology Co., Ltd.
7F, Harada Center Building
9-17, Naka cho 4chrome
Atsugi-city, Kanagawa
243-0018 Japan
TEL +81-46-295-7061 FAX +81-46-295-7066
URL http://www.sentech.co.jp/
Taiwan Sensor Technology, Inc.
3F-6, No. 9, Aiguo W, Rd,. Jhong Jheng District
Taipei City 100, Taiwan, R.O.C.
TEL 886-2-2383-2331 FAX 886-2-2370-8775
EMAIL: sentech0501@yahoo.com.tw