advertisement
Gigaset A410_A410A / IM_MEA en / A31008-M2402-R151-2-UZ19 / Bali_MEA_ar-fa.fm / 30.05.2012
1
Gigaset A410/A410A
The handset at a glance
1 Charge status of the batteries
2 Answering machine icon
(A410A only)
3 Signal strength
1
4 Display keys
2
5 End call key and On/Off key
3
6 Talk key/Handsfree key
7 Control key ( p
)
ª
INT
|
Audio settings
Internal call
Directory
Muting during a call
8 Key 1
Open the answering machine
(A410A only)/network mailbox
9 Star key
Ringers on/off (press and hold);
with an open connection: switch from pulse dialling to tone dialling (press briefly)
10 Key 0/recall key
Consultation call (flash): press and hold
11 Hash key
Keypad lock on/off (press and
hold); toggles between upper/ lower case and digits; inserts a dialling pause (press and hold)
9
10
11
12
12 Microphone
4
5
6
7
8
Ð
à U
INT 1
23.04. 10:53
‘ Menu
Please note
New messages in the calls list/ answering machine list/network mailbox list are indicated in the display by the message New mes-
Handset display keys:
Pressing a key launches the function that appears above that key in the display.
Display Function when pressed
’
§Menu§
Open main/submenu
(see menu overview
”
Go back one menu level.
Y
Scroll up/down or adjust volume with q
.
X
Move cursor to left/right with
r
.
Ü
Backspace deletes one character at a time.
§OK§
Confirm menu function or save entry.
Issued by
Gigaset Communications GmbH
Frankenstr. 2a, D-46395 Bocholt
© Gigaset Communications GmbH 2012
Subject to availability.
All rights reserved. Rights of modification reserved. www.gigaset.com
This user guide is made from 100 % recycled paper.
Gigaset A410_A410A / IM_MEA en / A31008-M2402-R151-2-UZ19 / Bali_MEA_ar-fa.fm / 30.05.2012
2
The base station at a glance
Basis A410A
2
6
1
Basis A410
1
5
4
3
1 Registration/Paging key:
Search for handsets (press briefly, paging
Register handsets (press and hold
2 Volume keys: (– = quieter; + = louder)
During message playback: adjust the speaking volume.
While the phone is ringing: adjust the ringer melody volume.
3 Play/Stop key:
Switch answering machine on and off (press and hold);
play back new messages from answering machine (press briefly);
during message playback: cancel playback (press briefly).
Lights up: answering machine is activated.
Flashes: at least one new message is present or message is played back or being recorded.
Flashes very quickly: memory is full.
During message playback:
4 Skip to the start of the current message (press once) or go to the previous message (press twice).
5 Go to the next message.
6 Delete current message.
ECO DECT
During a call, the transmission power is automatically adjusted to the distance between handset and base station, the smaller the distance, the lower the transmission power (radiation). In idle status the transmission power of the handset is switched off. Only the base station ensures contact with the handset using low radio signals.
Your phone offers you the opportunity to further reduce the transmission power:
1) Reducing transmission power (eco mode)
If the setting Max. Range is switched to off (menu tree
page 24), the transmission power in standby mode and
during a call is reduced up to 80% at half range.
2) Deactivating transmission power (eco mode+)
With the setting No Radiation (menu tree
page 24), you turn off the transmission power of the base station in
standby mode completely. Please note:
◆
All registered handsets must support this feature.
◆
For quick connection of incoming calls the handset repeatedly switches to reception mode for short periods.
This increases energy consumption and therefore reduces the standby and talk times.
Gigaset A410_A410A / IM_MEA en / A31008-M2402-R151-2-UZ19 / Bali_MEA_ar-fa.fm / 30.05.2012
3
Safety precautions
Warning
Read the safety precautions and the user guide before use.
Explain their content and the potential hazards associated with using the device to your children.
Use only the power adapter indicated on the device.
Use only rechargeable batteries that correspond to the specification (see "Technical Data"). Never use a conventional (non-rechargeable) battery or other battery types as this could result in significant health risks and personal injury. Rechargeable batteries, which are noticeably damaged, must be replaced.
Using your telephone may affect nearby medical equipment. Be aware of the technical conditions in your particular environment, e.g., doctor's surgery.
If you use a medical device (e.g., a pacemaker), please contact the device manufacturer. They will be able to advise you regarding the susceptibility of the device to external sources of high frequency energy (for the specifications of your Gigaset product see "Technical Data").
Do not hold the rear of the handset to your ear when it is ringing or when speaker mode is activated. Otherwise you risk serious and permanent damage to your hearing.
Your Gigaset is compatible with the majority of digital hearing aids on the market. However, perfect function with all hearing aids cannot be guaranteed.
The phone may cause interference in analogue hearing aids (humming or whistling) or cause them to overload.
If you require assistance, please contact the hearing aid supplier.
The devices are not splashproof. For this reason do not install them in a damp environment such as bathrooms or shower rooms.
Do not use the devices in environments with a potential explosion hazard (e.g., paint shops).
If you give your Gigaset to a third party, make sure you also give them the user guide.
Remove faulty devices from use or have them repaired by our Service team, as these could interfere with other wireless services.
Please note
◆
The device cannot be used in the event of a power failure. It is also not possible to transmit emergency calls.
◆
Emergency numbers cannot be dialled if the keypad lock is activated!
Gigaset A410_A410A / IM_MEA en / A31008-M2402-R151-2-UZ19 / Bali_MEA_ar-fa.fm / 30.05.2012
4
First steps
Check the package contents
Base station and handset package: One Gigaset handset, one Gigaset A410/A410A base station, one mains adapter, one phone cord, two batteries, one battery cover, one user guide.
Handset and charging cradle package: One Gigaset handset, one charging cradle with mains adapter, two batteries, one battery cover, one user guide.
If you have purchased a model with multiple handsets, the package should contain two batteries, a battery cover and a charging cradle with mains adapter for each additional handset.
Setting up the base station and charging cradle (if included)
The base station and charging cradle are designed for use in enclosed dry rooms with a temperature range of +5 °C to
+45 °C.
¤
Set up the base station at a central location on a flat, non-slip surface in your house or apartment. You can also mount the base station and charging cradle on the wall.
Please note
Pay attention to the range of the base station. This is up to 300 m in unobstructed outdoor areas and up to 50 m inside buildings.
The phone's feet do not usually leave any marks on surfaces. However, due to the multitude of different varnishes and polishes used on today's furnishings, the occurrence of marks on the surfaces cannot be completely ruled out.
Care: Wipe down the base station, the charging cradle and the handset with a damp cloth (no solvents) or an antistatic cloth. Never use a dry cloth. This can cause static.
Please note:
◆
Never expose the telephone to the influence of heat sources, direct sunlight or other electrical devices.
◆
Protect your Gigaset from moisture, dust, corrosive liquids and vapours.
Connecting the base station
¤
First connect the mains adapter 1 .
¤
Then connect the telephone jack 2 and insert the cables into the cable ducts.
A410A
Please note:
◆
The mains adapter must always be connected, as the phone will not operate without mains connection.
◆
Only use the mains adapter and phone cord supplied.
Pin connections on telephone cables can vary.
◆
The answering machine (A410A only) is ready for use approx. 30 seconds after the base station has been connected.
A410
Connecting the charging cradle (if included)
2
1
¤
Connect the flat plug from the power supply 1 .
¤
Plug the mains adapter into the plug socket 2 .
If you need to disconnect the plug from the charging cradle, press the release button 3 and disconnect the plug 4 .
3
4
Gigaset A410_A410A / IM_MEA en / A31008-M2402-R151-2-UZ19 / Bali_MEA_ar-fa.fm / 30.05.2012
5
Setting up the handset for use
The display is protected by a plastic film. Please remove the protective film!
Inserting the batteries and closing the battery cover
Warning
Use only the rechargeable batteries recommended by Gigaset Communications GmbH (
conventional (non-rechargeable) batteries as this could result in significant health risks and personal injury. For example, the batteries could explode. The phone could also malfunction or be damaged as a result of using batteries that are not of the recommended type.
¤
Insert the batteries with the polarity in the correct direction.
The polarity is indicated in the battery compartment.
¤
Insert the battery cover from the top.
¤
Then slide the cover upwards until it clicks into place.
To open the battery cover, for instance to replace the batteries:
¤
Reach into the notch at the top of the cover and slide the cover downwards.
Initial charging and discharging of the batteries
The correct charge status can only be displayed if the batteries are first fully charged and discharged.
6 h
¤
Charge the handset in the base station/charging cradle for 6 hours.
Please note
The handset must only be placed in the designated
Gigaset base station or charging cradle.
¤
After charging, remove the handset from the base station/charging cradle and only replace it when the batteries are fully discharged.
Please note
◆
Base station and handset package: The handset is pre-registered with the base station. If you have purchased a model with multiple handsets, all handsets will already be registered with the base station. You do not need to register the handset again.
However, if a handset is not registered with the base station (Register HS or Put into base is displayed), please
register the handset manually (
Handset and charging cradle package: please register the handset manually (
◆
After the first battery charge and discharge, you may place your handset in the charger after every call.
◆
Always repeat the charging and discharging procedure if you remove the batteries from the handset and reinsert them.
◆
The batteries may warm up during charging. This is not dangerous.
◆
After a while, the charge capacity of the batteries will decrease for technical reasons.
Gigaset A410_A410A / IM_MEA en / A31008-M2402-R151-2-UZ19 / Bali_MEA_ar-fa.fm / 30.05.2012
6
Changing the display language
Change the display language if you do not understand the language currently set:
§Menu§
¤
¤ 421
(press the keys one after the other)
Press and hold the end call key a
¤ q
to return to idle status.
(select language)
¤
§OK§ (
‰
= current language)
Setting the date and time
Set the date and time so that the correct date and time can be assigned to incoming calls, and so that the alarm can be used.
§Menu§
¤ q
Settings
¤
§OK§
¤
Date/Time
¤
§OK§
¤
Date
¤
¤
§OK§
¤
Time
¤ ~
¤ a
(press and hold to return to idle status).
~
(enter the day, month and year in 6-digit format)
(enter hours and minutes in 4-digit format)
¤
§OK§ (display message: Saved)
You can move the position of an entry to the left or right by pressing the control key left or right r
.
Please note
If your phone receives the date and time during calling line display (e.g., via your network provider, a router or
PABXs), you can specify whether this data should be copied to your phone:
¤
Press the key sequence: §Menu§
¤ P#Q5#MI
973 SET: [0]
The following is displayed; the current setting flashes:
¤
Press one of the following keys to specify, when this data should be copied to your phone:
Q or or
1
2
Never
Once, in case the date/time is not set on your phone
Always
Your selection is displayed (e.g., 2):
¤
Press the display key §OK§ .
973 SET: [2]
Display in idle status
Once the phone is registered and the time set, the idle status is shown as in this example.
Screen display
◆
Reception between the base station and the handset:
Good to poor:
Ð ¨ § ¦
¥
No reception:
◆
Activating the answering machine (A410A only):
-
± Your answering machine is activated.
◆
Battery charge status:
-
-
-
-
-
-
U
Charged over 66%
V
Charged between 34% and 66% e
Charged between 11% and 33%
=
Charged less than 11%
=
Flashes: batteries almost empty (less than 10 minutes talktime)
= e V U
Batteries are charging
½
icon is displayed in the top left.
Ð
Ã
INT 1
U
23.04. 10:53
‘
Menu
Activating/deactivating the handset
Press and hold the a
key to activate or deactivate the handset. If you place a deactivated handset in the base station or charging cradle, it will automatically activate after approx. 30 seconds.
Your phone is now ready for use.
page 17) or contact our Customer Care team
Menu guidance
Your telephone's functions are accessed via a menu consisting of several levels (menu overview
Main menu (first menu level)
¤
When the handset is in idle status, press the display key §Menu§ or right on the control key v
to open the main menu.
The functions in the main menu are shown by means of an icon and the function's name.
Selecting a function:
¤
You can scroll between functions using the control key q
. The function is shown in the display.
¤
Press the display key §OK§ or the right control key v to select the displayed function. This opens the corresponding submenu and the first entry is displayed.
If you press the display key
”
or briefly the end call key a
, the display returns to idle status.
Gigaset A410_A410A / IM_MEA en / A31008-M2402-R151-2-UZ19 / Bali_MEA_ar-fa.fm / 30.05.2012
7
Submenus
The functions in the submenu are indicated by name.
Selecting a function:
¤
You can scroll between functions using the control key q
. The function is shown in the display.
¤
Press the display key §OK§ to select the displayed function. This opens the corresponding submenu and the first entry is displayed.
If you press the display key
”
or briefly the end call key a
, the display returns to the previous menu level or you cancel the operation.
Any settings you have not confirmed by pressing the display key §OK§ are lost.
Reverting to idle status
From any point in the menu:
¤
Press and hold the end call key a
or
¤
Do not press any key: after 2 minutes, the display will automatically revert to idle status.
Making calls
Making external calls and ending calls
External calls are calls using the public telephone network.
~
(Enter the phone number)
¤ c
.
The phone number is dialled. (Or you can first press and hold talk key c
[dial tone] and then enter the number.) During the call you can adjust the earpiece volume using t
and set the volume with
End the call/cancel dialling: Press the end call key a
.
q
.
You can automatically insert a network provider dialling code before any phone number (
Accepting a call
The handset indicates an incoming call by ringing and by a display on the screen.
Press the talk key c
to accept the call.
When Auto Answer is activated (see menu overview
page 24), simply remove the handset from the base station/
charging cradle.
Calling Line Identification
When you get a call, the caller's number will be displayed on your handset; the caller's name will be displayed if it is stored in the directory.
Prerequisites:
1 You have asked your network provider for the caller's number (CLIP) to be displayed on your handset screen.
2 The caller has asked the network provider for his number to be identified (CLI).
External Call appears in the display if you have not requested CLIP, Withheld appears if the caller has withheld CLI, and
Unavailable appears if CLI has not been requested.
Handsfree operation
In handsfree mode, you activate the loudspeaker so that you can hear the caller without having to hold the handset to your ear. During a call and when listening to the answering machine (Gigaset A410A only) you can activate or deactivate handsfree mode by pressing the handsfree key d
.
During the call in handsfree mode you can adjust the handsfree volume by pressing t
and set the volume with q
.
Muting
You can deactivate your handset's microphone during a call. Press the right control key v
to mute the handset. Press the control key v
again to reactivate the microphone.
Automatic network provider preselection
You can store a call-by-call number (preselection number), which is automatically placed in front of numbers when you dial them. If, for example, you wish to make international calls via special network providers, you can save the relevant dialling code here.
In the "With Preselect" list, specify the dialling codes or the first digits of the dialling codes that you wish to assign to the preselection number.
Gigaset A410_A410A / IM_MEA en / A31008-M2402-R151-2-UZ19 / Bali_MEA_ar-fa.fm / 30.05.2012
8
In the "Without Presel." list, enter any exceptions to the "With Preselect" list.
Example:
Presel. Number 0999
With Preselect 08
Without Presel.
081
084
All numbers that start with 08, except for 081 and 084, are dialled with the preselection number 0999.
Phone number Dialled number
07112345678
¤
07112345678
08912345678
¤
0999 08912345678
08412345678
¤
08412345678
Enter preselection number via menu (
Permanently deactivating preselection: Delete the preselection number with
Ü
.
Temporarily cancelling preselection: c
(press and hold)
¤
§Menu§
¤ q
Preselect off
¤
§OK§
¤ number is dialled without Preselection.
~
(enter number) or s
(use number from directory)
¤
The
Using the directory and lists
Directory
To open the directory: press control key s
.
You can save up to 100 phone numbers (max. 22 digits) with corresponding names (max. 16 characters).
Storing the first number in the directory
s ¤
New Entry?
¤
§OK§
¤ ~
(enter number)
¤
§OK§
¤ ~
(enter name)
¤
§OK§
Storing further numbers in the directory
s ¤
§Menu§
¤
New Entry
¤
§OK§
¤ ~
(enter number)
¤
§OK§
¤ ~
(enter name)
¤
§OK§
Selecting a directory entry
Open the directory with s
.
You have the following options:
◆
Use q
to scroll through the entries until the required name is selected.
◆
Enter the first character of the name and scroll to the entry with q
, if required.
Dialling with the directory
s ¤ q
(select entry)
¤ c
Using other functions s ¤ q
(select entry)
¤
§Menu§
The following functions can be selected with q
:
New Entry Save new phone number.
Show Number
Show Name
Edit Entry
Use Number
Delete Entry
Send Entry
Delete List
Send List
Shortcut
Display the phone number.
Display the name.
Edit selected entry.
Edit the number or open the directory by pressing the control key s
to insert a number from the directory at the current position. Then dial or use other functions with §Menu§ .
Delete selected entry.
Send a single entry to another handset (
Delete all directory entries.
Send the complete list to another handset (
For shortcuts, assign the current entry to a key.
Using shortcut keys
You can assign directory entries to the keys 2–9: s ¤ q
(select entry)
¤
§Menu§
¤ q
Shortcut
¤
§OK§
¤ q
(select key)
¤
§OK§ or
~
(press the key you want to assign the entry to)
To dial, press and hold the required shortcut key.
Gigaset A410_A410A / IM_MEA en / A31008-M2402-R151-2-UZ19 / Bali_MEA_ar-fa.fm / 30.05.2012
9
Sending the directory to another handset
Prerequisites:
◆
The sending and receiving handsets must both be registered to the same base station.
◆
The other handset and the base station can send and receive directory entries.
s ¤ q
(select entry)
¤
§Menu§
¤ q
Send Entry / Send List
¤ q
(Select the internal party)
¤
§OK§ or
¤
¤
§OK§
~
(enter the internal number of the receiving handset)
Last number redial list
This list contains the ten last dialled numbers.
Dialling from the last number redial list
c
(press briefly)
¤ q
(select entry)
¤ c
Managing entries in the last number redial list
c
(press briefly)
¤ q
(select entry)
¤
§Menu§
You can select the following settings:
Use Number Edit the number or open the directory by pressing the control key s
to insert a number from the directory at the current position. Then dial or use other functions with §Menu§ .
Copy to Dir.
Copy an entry to the directory.
Delete Entry Delete selected entry.
Delete List Delete all entries.
Calls list/answering machine list/network mailbox list
Press the display key
’
, to open the list overview. If you have new messages, only lists with new messages are displayed. Scroll through the lists by pressing q
.
An advisory tone sounds as soon as a new entry appears in the calls list/answering machine list/network mailbox list.
By default the left display key flashes and the message New messages appears on the display. You can change this behaviour by using the following procedures:
¤
Press the key sequence: §Menu§
¤ P#Q5#M
The following is displayed:
97
¤
Press one of the following keys to select the message type:
5 or
M for missed calls
for messages on the answering machine ( A410A only)/network mailbox
Your selection is displayed (e.g., 5 for missed calls); the current setting flashes:
975 SET: [0]
Press key
Q
or
1
, to set the behaviour for new messages:
Q or
1
The presence of new messages is displayed (default setting).
The presence of new messages is not displayed.
Your selection is displayed (e.g., 1):
975 SET: [1]
¤
Press the display key §OK§ .
Settings will only be changed once a new message has been received.
Please note
When calls are saved in the network mailbox, you will receive a message if the appropriate settings have been made
(depending on your network provider).
Calls list
Depending on the type of list set, the calls list contains (
◆
Answered calls
◆
Missed calls
◆
Calls recorded from the answering machine (A410A only)
Depending on the type of list set, all numbers of the last 25 incoming calls are saved or just the missed calls are saved.
Gigaset A410_A410A / IM_MEA en / A31008-M2402-R151-2-UZ19 / Bali_MEA_ar-fa.fm / 30.05.2012
10
Open the calls list
’ ¤ q
CallsList
The calls list is displayed as follows:
Number of new entries + number of old, read entries CallsList 01+02
Press §OK§ to open the list.
The last incoming call is displayed. If necessary, use q
to select another entry.
Using other functions q
(select entry)
¤
§Menu§
The following functions can be selected with q
:
Delete Entry
Copy to Dir.
Date/Time
Status
Delete List
Delete current entry.
Copy an entry to the directory.
Call date and time (if set).
New Call: new missed call. Old Call: entry already read.
Warning! All old and new entries will be deleted.
Calling back a caller from the calls list
’ ¤ q
CallsList 01+02
¤
§OK§
¤ q
(select entry)
¤ c
Answering machine list (A410A only) /Network mailbox list
Operating the answering machine (A410A only)
answering machine via the keys on the base station (
set.
page 2). The following sections describe operation via the hand-
You can record your own announcement messages using the handset. The pre-recorded announcement is used, if no personal announcement is available.
If the memory is full, Answer M.full! appears in the display and the answering machine switches itself off automatically.
It activates again automatically when you delete old messages.
The answering machine has already been preset at the factory. Make individual settings using the handset.
How to set a delay time, after which the answering machine is to answer a call, as well as how to set the recording length
and activate call screening during the recording, see menu overview (
Activating/deactivating the answering machine
§Menu§
¤ q
Answer Machine
¤
§OK§
¤ q
Answ. Mach.
¤
§OK§ (
‰
= on)
When you switch on the answering machine, the
±
icon appears in the display.
Recording your own announcement
§Menu§
¤ q
Answer Machine
¤
§OK§
¤ q
Announcements
¤
§OK§
¤
Rec announce.
¤
§OK§
¤
Start recording?
¤
§OK§
You hear the ready tone (short tone). Now speak your announcement (at least 3 sec.). Press §OK§ to confirm or press or
”
to reject your recording. After recording, the announcement is played back for you to check. a
Please note:
Recording ends automatically when the max. recording time of 170 seconds is reached or if there is a break in speaking of more than 2 seconds.
Playing back or deleting announcements
See menu overview
Playing back/deleting messages
There are three ways to start playing back messages on the answering machine.
◆
Start message playback via the Answer Machine menu:
§Menu§
¤ q
Answer Machine
¤
§OK§
¤ q
Play Messages
¤
§OK§
If you have entered a number for the network mailbox you still need to select the answering machine:
¤ q
Answ. Mach.
¤
§OK§
◆
Start message playback via the answering machine list:
’ ¤ q
Answer M.
The list is displayed as follows:
Number of new messages + number of old, played back messages Answer M.01+02
Press §OK§ to open the list.
Gigaset A410_A410A / IM_MEA en / A31008-M2402-R151-2-UZ19 / Bali_MEA_ar-fa.fm / 30.05.2012
11
¤
Fast access to the answering machine:
To access the answering machine, simply press and hold the
1
key. The integrated answering machine has already
been preset at the factory. However, if you have set the network mailbox for fast access, you can change this setting
If you have new messages, playback will start with the first new message, otherwise with the first old message.
The loudspeaker on the handset switches on automatically. To switch it off, press the handsfree key d
.
Messages consist of
◆ the message header (number/date/time) and
◆ the message body (recorded text).
The header is played back first, then the body. The phone number or the name is displayed.
Stopping and controlling playback
Controlling playback depends on the point in time at which the corresponding key is pressed.
During message playback:
2 t
or
1
Pause playback. Press
2
again to resume.
During playback of message header: Go to the start of the previous message. Skipping back from the first message jumps to the last message.
During playback of message body: Go to the start of the current message.
s
or
I
Go to the start of the next message. Skipping forward from the last message jumps to the first message.
L
During playback of message header: Skip header.
During playback of message body: Go to the body of the next message. Skipping forward from the last message jumps to the first message.
Additional functions during message playback
Press the display key §Menu§ . Playback stops.
Select the relevant function using q
:
Dial Number Dial number.
Continue
Volume
Copy to Dir.
Delete all old
Continue message playback.
Setting volume.
Copy the caller's number to the directory.
Delete all old messages.
During playback: Press key
Q
or the display key
Ü
.
New messages can only be deleted during playback of message body.
Deleting all old messages
During playback or when paused:
§Menu§
¤ q
Delete all old
¤
§OK§ (Confirm the security prompt)
Accepting a call from the answering machine
You can accept a call while the answering machine is recording it:
§Menu§
¤
Accept
¤
§OK§
You can also accept the call by:
◆
Pressing the talk key c
◆
Removing the handset from the base station/charger (if Auto Answer is activated
Please note
When Call Screening is activated on the handset and the call can already be heard on the handset, you can only accept the call via §Menu§
¤
Accept
¤
§OK§ . Pressing the talk key/handsfree key c
only activates or deactivates the handsfree mode.
Recording stops and you can speak to the caller.
Setting a different language
You can change the language for the voice prompt and default announcement.
§Menu§
¤ q
Answer Machine
¤
§§OK§§
¤ q
Language
¤
§§OK§§
¤ q
(select language)
¤
§OK§
Gigaset A410_A410A / IM_MEA en / A31008-M2402-R151-2-UZ19 / Bali_MEA_ar-fa.fm / 30.05.2012
12
Operating when on the move (remote operation)
You can check your answering machine from any other telephone (hotel, pay phone etc.).
Prerequisites:
◆
You have set a system PIN other than 0000 (
◆
The phone you are using for remote operation has tone dialling (DTMF) i. e., you hear different tones when you press the keys.
Calling the answering machine and playing messages
~
(Dial your own number.)
¤
When you hear your announcement, press
9
and enter the system PIN.
The following keys are used for operation:
A
During the number/date/time announcement: Skip to the start of the previous message.
During the message playback: Skip to the start of the current message.
B
Stop playback. Press again to resume.
3
Go to the next message.
0
Delete current message.
Activating the answering machine
~
(Enter your own number and allow the phone to ring until you hear the message, "Please enter your PIN code.")
¤ ~
Enter system PIN
Your answering machine is activated. It tells you how much memory time is left. The messages are now played back. The answering machine cannot be deactivated remotely.
Network mailbox
The network mailbox is the answering machine in your provider's telephone network. More information is available from your provider. You cannot use the network mailbox unless you have requested it from your provider.
In order to use the network mailbox quickly and easily via the network mailbox list (
page 1), you will need to enter the number in your phone:
§Menu§
¤ q
Answer Machine
¤
§OK§
¤ q
Net Mailbox
¤ ~
(enter number)
¤
§OK§
Locating a handset (paging)
You can locate your handset using the base station.
¤
Briefly press the registration/paging key on the base station (
All handsets will ring at the same time (paging), even if the ringers are switched off.
Ending paging: Briefly press the registration/paging key on the base station (
c
or the end call key a
on the handset.
Registering handsets manually
You can register up to four handsets on your base station. Each additional handset must be registered on the base station in order for it to work properly!
1) On the handset
§Menu§
¤ q
Settings
¤
§OK§
¤ q
Handset
¤
§OK§
¤ q
Register HS
¤
Enter the base station system PIN (default setting: 0000)
¤
§OK§
¤
Registering is displayed.
2) On the base station
Within 60 seconds, press and hold the registration/paging key on the base station (
page 2) for approx. 3 seconds.
(A410A only: There is a tone played if the registration mode is activated.)
Registration takes approx. 1 minute. Once the registration process has been completed successfully, the display briefly shows HS registered and returns to idle status. Handsets are assigned the lowest available internal number (1-4). If the internal numbers 1–4 are already assigned to other devices, the number 4 will be overwritten.
Gigaset A410_A410A / IM_MEA en / A31008-M2402-R151-2-UZ19 / Bali_MEA_ar-fa.fm / 30.05.2012
13
De-registering handsets
You can de-register all other registered handsets from each of the registered Gigaset handsets.
§Menu§
¤
0000)
¤ q
§OK§
Settings
¤
§OK§
¤ q
Handset
¤
§OK§
¤ q
De-register HS register. The handset you are currently using is indicated by <.
¤ q
Select the internal party you wish to de-
¤
§OK§
¤
Enter the base station system PIN (default setting:
Using multiple handsets
Making internal calls
Internal calls are free calls to other handsets that are registered to the same base station.
2 handsets are registered
Press the control key u
, the other handset is called.
More than 2 handsets are registered
Calling a specific handset u ¤ ~
(1...4, enter internal number of the handset) or
u ¤ q
(Select the internal party)
¤
§OK§ or c ¤
the handset is called.
Calling all handsets (group call)
Press and hold u or u ¤ P or u ¤ q
Call all
¤
§OK§ or c ¤
all handsets are called.
When a participant answers you can speak to him. To end the call, press a
.
Internal consultation call/connecting a call
You are in conversation with an external participant. Press the control key u
and call one or all handsets. The external participant hears the hold music. When the internal participant answers: Announce the external call, if necessary.
Either
press the end call key a
. The call is transferred to the internal participant, or
press the display key
”
. You are reconnected with the external participant.
When transferring a call you can also press the end call key a
before the internal participant answers.
Listening in to an external call
You are conducting an external call. An internal participant can listen in on this call and take part in the conversation
(conference). Prerequisite: The Listening in function must be activated.
Activating/deactivating listening in
§Menu§
¤ q
Settings
¤
§OK§
¤ q
Base
¤
§OK§
¤ q
Listening in
¤
§OK§ (
‰
= on)
Internal listening in (conference)
You want to listen in to an existing external call. Press and hold the
c
key. You can listen in to the call. All participants hear a signal tone.
To end: press the end call key
a
. All participants hear a signal tone.
If the first internal participant presses the end call key
a
, the handset that has "listened in" remains connected to the external participant.
Setting the alarm clock
Activating/deactivating the alarm clock
§Menu§
¤ q
Alarm Clock
¤
§OK§
¤
Activation
¤
§OK§ (
When activated:
¤
‰
= on)
~
(Set the wake-up time)
¤
§OK§
When the alarm clock rings, press any key to switch it off for 24 hours. If the alarm clock is set, the wake-up icon l
will appear on the screen and the wake-up time will be displayed instead of the date.
Setting the wake-up time
§Menu§
¤ q
Alarm Clock
¤
§OK§
¤ q
Wake-upTime
¤
§OK§
Enter the wake-up time in hours and minutes, then press §OK§ .
Gigaset A410_A410A / IM_MEA en / A31008-M2402-R151-2-UZ19 / Bali_MEA_ar-fa.fm / 30.05.2012
14
Phone settings
For details on activating/deactivating advisory tones and battery low tones, see menu tree (
For details on setting the display contrast and large dialling numbers, see menu tree (
For details on how to set the system PIN on the base station, see the menu overview (
Changing the display language
§Menu§
¤ q
Settings
¤
§OK§
¤ q
Handset
¤
The current language is indicated by
‰
.
§OK§
¤ q
Language
¤
§OK§
¤ q
(select language)
If you accidentally choose a language you do not understand:
§Menu§
¤ 421
(press the keys one after the other)
¤ q
(select language)
¤
§OK§
¤
§OK§
Changing the handsfree/earpiece volume
In idle status: t ¤
Handset Volume
¤
§OK§ (
‰
= selected)
¤
§OK§
¤ q
Earpiece/Speaker
¤
§OK§
¤ q
(set the volume level 1 to 5)
During a conversation via the earpiece or in handsfree mode: t ¤ q
(set the volume level 1 to 5)
The setting will automatically be saved after approximately 3 seconds or press the display key §OK§ .
You can also set the handsfree/earpiece volume using the menu Audio Settings (
Setting the sound of the earpiece
Adapt the sound of the earpiece to your needs.
◆
Low: Standard setting.
◆
High: High frequencies are emphasized.
In idle status: t ¤ q
Handset Sound
¤
§OK§
¤ q
Low/High
¤
§OK§ (
‰
= selected)
You can also set the sound of the earpiece using the menu Audio Settings (
Setting ring tones of the handset
Setting the ringer volume
In idle status: t ¤ q
Ringer Volume
¤
§OK§
¤ q
(set the volume level 1 to 5 or "Crescendo")
You can also set the call volume using the menu Audio Settings (
¤
§OK§ (
‰
= selected)
Setting the ringer melody
Set different ringer melodies for External Calls, Internal Calls and the Alarm Clock.
In idle status: t ¤ q
Ringer Melody
¤
§OK§
¤ q
External Calls / Internal Calls / Alarm Clock
¤
§OK§
¤ q
(select melody)
¤
§OK§ (
‰
= selected)
You can also set the call volume using the menu Audio Settings (
Time Control (day/night mode)
You can specify a time period when you do not want the telephone to signal external calls e.g., during the night.
Activating Time Control:
§Menu§
¤ q
Settings
¤
§OK§
¤ q
Handset
¤
§OK§
¤ q
Time Control
¤
§OK§
¤
Activation
¤
§OK§ (
‰
= activated)
Setting time period:
§Menu§
¤ q
Settings
¤
¤
Off from:
§OK§
¤ q
Handset
¤
§OK§
¤ q
Time Control
¤
§OK§
¤ q
Settings
¤
§OK§
~
(Enter time in 4-digit format)
¤
§OK§
¤
Off until:
~
(Enter time in 4-digit format)
¤
§OK§
Anonymous calls silent
You can set your handset so that it doesn't ring for calls where Calling Line Identification has been withheld. The call will only be signalled on the display.
§Menu§
¤ q
Settings
¤
§OK§
¤ q
Handset
¤
§OK§
¤ q
An.Call Silent
¤
§OK§ (
‰
= activated)
Gigaset A410_A410A / IM_MEA en / A31008-M2402-R151-2-UZ19 / Bali_MEA_ar-fa.fm / 30.05.2012
15
Activating/deactivating the ringer
Deactivating/reactivating the ringer permanently
In idle status, press and hold the star key
P
. If the ringer is deactivated, the
Ú
icon appears in the display.
Deactivating the ringer for the current call
§Menu§
¤
Silent
¤
§OK§
Setting ring tones of the base station (A410A only)
Set the Ringer Volume, Ringer Melody and the Time Control for the base station:
§Menu§
¤ q
Settings
¤
§OK§
¤ q
Base
¤
§OK§
¤
Audio Settings
¤
§OK§
¤ q
Ringer Volume/Ringer Melody/Time Control
Perform the setting analogously to the description in "Setting ring tones of the handset".
Activating/deactivating music on hold
You can set that your external participant hears music in case of internal recall and during call transfer.
§Menu§
¤ P#Q5#1M ¤
The number for the current setting flashes: 0 = off; 1 = on
¤
enter number
¤
§OK§ .
Repeater mode
Repeater mode and No Radiation mode (
page 24) cancel each other out.
Resetting the handset
You can reset individual settings and changes that you have made. Entries in the directory, the calls list and the handset's registration to the base station will be retained.
§Menu§
¤ q
Settings
¤
§§OK§§
¤ q
Handset
¤
§§OK§§
¤ q
Reset Handset
¤
§§OK§§
¤
Reset?
¤
§§OK§§
Restoring the base station
When restoring factory settings:
◆
Individual settings are reset.
◆
All lists are deleted.
◆
The No Radiation mode is deactivated.
The date and time are retained. The answering machine (A410A only) is ready for use approx. 15 seconds after the base station has been reset.
Resetting the base station via the menu
When resetting via the menu
◆
Handsets are still registered.
◆
The system PIN is not reset.
§Menu§
¤ q
Settings
¤
§OK§
¤ q
Base
¤
§OK§
¤ q
Base Reset
¤
§OK§
¤
Reset?
¤
§OK§
Resetting the base station using the key on the base station
When resetting the base station using the key on the base station
◆
All handsets are de-registered and
◆
The system PIN is reset to the original code 0000.
Carry out the following steps: Remove the mains cable from the base station. Hold down the registration/paging key
page 2) and reconnect the power cable to the base station at the same time. Hold the key down
for at least 5 seconds.
Operating the base station on the PABX/router
Operating on the router
page 24). If you have no problems with echoing, this function should be deactivated.
Operating on the PABX
The following settings are only necessary when your PABX requires them, see the user guide for your PABX.
When entering the digits, enter them slowly one after the other.
Changing the dialling mode
§Menu§
¤ P#Q5#1N ¤
The number for the set dialling mode flashes: 0 = touch tone dialling (DTMF);
1 = dial pulsing (DP)
¤
enter number
¤
§OK§ .
Gigaset A410_A410A / IM_MEA en / A31008-M2402-R151-2-UZ19 / Bali_MEA_ar-fa.fm / 30.05.2012
16
Setting recall
§Menu§
¤ P#Q5#1Q ¤
The number for the current recall flashes: 0 = 80 ms; 1 = 100 ms; 2 = 120 ms;
3 = 400 ms; 4 = 250 ms; 5 = 300 ms; 6 = 600 ms; 7 = 800 ms
¤
enter number
¤
§OK§ .
Changing pause after line seizure
You can set the length of the pause inserted between pressing the talk key c
and sending the phone number.
§Menu§
¤
¤
P#Q5#1L
enter number §OK§ .
¤
The number for the current pause length flashes: 1 = 1 sec.; 2 = 3 sec.; 3 = 7 sec.
Changing the pause after the recall key
§Menu§
¤ P#Q5#12
3 = 3200 ms enter number §OK§ .
¤
The number for the current pause length flashes: 1 = 800 ms; 2 = 1600 ms;
Appendix
Entering letters/characters
Standard characters
Press the relevant key the number of times indicated.
Briefly press the hash key
#
to switch from "Abc" to "123" mode, from "123" to "abc" mode and from
"abc" to "Abc" mode.
1x 2x 3x 4x 5x 6x 7x 8x 9x 10x 11x 12x 13x 14x 15x
1 1
£ $ ¥ ¤
2 a b c 2 ä á à â ã ç
I d e f 3 ë é è ê
4 g h i 4 ï í ì î
5 j k l 5
L m n o 6 ö ñ ó ò ô õ
M p q r s 7 ß
N t u v 8 ü ú ù û
O w x y z 9 ÿ ý æ ø å
Q 1)
.
, ?
!
0 + : ¿
P *
#
/ (
#
)
@
<
\
=
&
>
§
%
¡ " ’ ; _
1) Space
Technical Data
Batteries
Technology: Nickel-metal-hydride (NiMH); Size: AAA (Micro, HR03); Voltage: 1,2 V; Capacity: 450 - 1000 mAh
Handset operating times/charging times
Your handset can charge batteries up to a capacity of 1000 mAh. The use of special high-performance batteries or batteries with high capacities is not recommended for cordless phones.
The operating time of your Gigaset depends on the capacity and age of the batteries and the way it is used. (Standby time/talk time/operating time are maximum possible values, charging times are typical values.)
Standby time (hours)
Talktime (hours)
Operating time for 1.5 hrs of calls per day (hours),
No Radiation mode switched off/on
Charging time in base station (hours)
Charging time in charger (hours)
550
220
14
115/85
6
5.5
Capacity (mAh) approx.
700
255
17
135/95
7
6.5
800
295
19
150/110
8
7
1000
360
24
190/135
10
9
Due to the constant progression in battery development, the list of recommended batteries in the FAQ section of the
Gigaset Customer Care pages is regularly updated: www.gigaset.com/service
Base station power consumption
A410
In standby mode
– Handset in base station
– Handset outside base station
During a call
A410A ca. 1.0 W ca. 0.8 W ca. 1.2 W ca. 1.0 W ca. 1.0 W ca. 1.2 W
Gigaset A410_A410A / IM_MEA en / A31008-M2402-R151-2-UZ19 / Bali_MEA_ar-fa.fm / 30.05.2012
17
General specifications
DECT standard
GAP standard
Range
Base station power supply
Environmental conditions in operation is supported is supported up to 300 m outdoors, up to 50 m indoors
230 V ~/50 Hz
+5 °C to +45 °C, 20% to 75% relative humidity
Questions and answers
If you have any queries about the use of your telephone, visit our website at www.gigaset.com/service
for 24-hour support. The table below contains a list of common problems and possible solutions.
Problem
Nothing appears on the display.
No wireless connection to the base station, Base flashes in the display.
The display shows
Register HS or Put
into base.
Handset does not ring.
You cannot hear a ringer/dialling tone from the fixed line network.
Error tone sounds after system PIN prompt.
PIN forgotten.
Cause
The handset is not switched on.
The batteries are flat.
The handset is outside the range of the base station.
The base station is not turned on.
Solution
Press the end call key a
for approx. 5 seconds or place the handset in the base station.
Charge or replace the batteries.
Move the handset closer to the base station.
Handset has not been registered with the base station or has been de-registered.
The ring tone is deactivated.
The phone only rings if the phone number has been transferred.
The phone does not ring in a specific time period.
Activate the ring tone for anonymous calls
The phone cord supplied has not been used or has been replaced by a new cord with the wrong jack connections.
The system PIN you have entered is incorrect.
Please always use the phone cord supplied or ensure that the pin connections are correct when purchasing from a retailer: 3-4 assignment of telephone leads/
EURO CTR37.
Reset the system PIN to the default 0000
All handsets are de-registered. All settings are reset.
All lists are deleted.
Contact with liquid !
If the handset has come into contact with liquid:
1 Switch the handset off and remove the battery immediately.
2 Allow the liquid to drain from the handset.
3 Pat all parts dry, then place the handset with the battery compartment open and the keypad facing down in a dry, warm place for at least 72 hours (not in a microwave, oven etc.).
4 Do not switch on the handset again until it is completely dry.
When it has fully dried out, you will usually be able to use it again.
Authorisation
This device is intended for analogue phone lines outside the European Economic Area (with the exception of Switzerland) depending on national type approval.
Country-specific requirements have been taken into consideration.
We, Gigaset Communications GmbH, declare that this device meets the essential requirements and other relevant regulations laid down in Directive 1999/5/EC.
A copy of the Declaration of Conformity is available at this Internet address:
www.gigaset.com/docs
Gigaset A410_A410A / IM_MEA en / A31008-M2402-R151-2-UZ19 / Bali_MEA_ar-fa.fm / 30.05.2012
18
Customer Service & Assistance
Do you have any questions? As a Gigaset customer, you can find help quickly in this User Manual and in the service section of our Gigaset online portal www.gigaset.com/service.
In our constantly updated online service you can find:
◆
Extensive information about our products
◆
FAQ compilations
◆
Keyword search to help find topics quickly
◆
Compatibility database: Find out which base stations and handsets can be combined.
◆
Product comparison: Compare the features of several products with each other.
◆
Downloads for user manuals and current software updates
◆
E-mail contact form for customer service
Please register your phone online right after purchase.
This enables us to provide you with even better service regarding questions or an after sales query/issue/claim. In order to contact our customer service via email, please use the email contact form from our Gigaset online portal after selecting your home country.
Our representatives are also available on the telephone hotlines for consultation.
Gigaset A410_A410A / IM_MEA en / A31008-M2402-R151-2-UZ19 / Bali_MEA_ar-fa.fm / 30.05.2012
Customer Service & Assistance
Australia. . . . . . . . . . . . . . . . . . . . . . . 1300 780 878
Austria . . . . . . . . . . . . . . . . . . . . . 0043 1 311 3046
Bahrain. . . . . . . . . . . . . . . . . . . . . .97 31 73 11 173
Belgium . . . . . . . . . . . . . . . . . . . . . . . 0 78 15 66 79
Bosnia Herzegovina. . . . . . . . . . . . . 033 276 649
Brazil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4003 3020
(grandes cidades e regiões metropolitanas -
Custo de uma ligao local)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0800 888 3020
(demais localidades - Gratuito)
Bulgaria . . . . . . . . . . . . . . . . . . . .+359 2 9710666
(0.50 евро на минута от всички държави за стационарни телефони. За обаждания от мобилни телефони може да има други цени).
Canada . . . . . . . . . . . . . . . . . . . . . .1-866 247-8758
China . . . . . . . . . 0 21 400 670 6007 (RMB 0.11)
Croatia . . . . . . . . . . . . . . . 01 2456 555 (0,23 Kn)
Czech Republic . . . . . . . . . . . . . . . . . 233 032 727
Denmark . . . . . . . . . . . . . . . . +45 (0) 35 25 86 00
Finland . . . . . . . . . . . . . . . . . . . . . . . 09 231 134 25
France. . . . . . . . . . . . . . . . . . . . . +33 170 706 181
Coût d’un appel local depuis une ligne fixe
Orange.
Germany . . . . . . . . . . . . . . . . . . . . .01805 333 222
Der Anruf kostet Sie aus den deutschen Festnetzen 0,14 € pro Minute. Anrufe aus den deutschen Mobilfunknetzen kosten höchstens
0,42 € pro Minute.
Greece. . . . . . . . . . . . . . . . . . . . . . . . .801-100.0.500
(Χρέωση 0,0031 € το λεπτό για το σταθερό
δίκτυο της Ελλάδας. Για κλήσεις από κινητό ίσως ισχύουν άλλες χρεώσεις)
Hong Kong . . . . . . . . . . . . . . . . . . . . . . . 2763 0203
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2389 7285
Hungary. . . . . . . . . . . . . . . . . 01 267 21 09 (27 Ft)
India . . . . . . . . . . . . . . . . . . . . Please refer to your
. . . . . . . . . . . . . . . . . . . . . . . . . local warranty card
Indonesia . . . . . . . . . . . . . . . . . . (62-21) 5673813
. . . . . . . . . . . . . . . . . . . . . . . . . .(62-21) 888856000
Ireland . . . . . . . . . . . . . . . . . . . . . . . 18 50 77 72 77
Italy . . . . . . . . . . . . . . . . . . . . . . . . . . . 199.15.11.15
(€ cent 8,36 + IVA al minuto da telefono fisso della rete Telecom Italia senza scatto alla risposta mentre per le chiamate effettuate attra-
19 verso la rete di altri operatori fissi o mobili consultate le tariffe del vostro operatore)
Jordan. . . . . . . . . . . . . . . . . 00962 6 5625460/1/2
Kuwait. . . . . . . . . . . +965 -22458737/22458738
Lebanon. . . . . . . . . . . . . . . . . . . . . +9611240259/
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +9611236110
Luxembourg. . . . . . . . . . . . . . . +352 8002 3811
Malaysia . . . . . . . . . . . . . . . . . . . . +603-8076 9696
Malta . . . . . . . . . . . . . . +390 2360 46789 (0,10 €)
Mexico
. . . 01800 999 4442738 (01800 999 GIGASET)
Netherlands . . . . . . . . . . . . . . . . . 0900-3333102
(0,25 € per minuut (vast net). Voor oproepen uit het mobiele netwerk kunnen andere prijzen gelden.)
New Zealand . . . . . . . . . . . . . . . . . .0800 780 878
Norway . . . . . . . . . . . . . . . . . . . . . . . . . 22 70 84 00
(Oppstartskostnad 89 øre + 15 øre pr. minutt fra fasttelefon. For samtaler fra mobiltelefon gjelder egne priser.)
Oman . . . . . . . . . . . +968 709281 Ext. 49/21/75
Poland. . . . . . . . . . . . . . . . . . . . . . . . . . 801 140 160
Portugal . . . . . . . . . . . . . . . . . .(351) 808 781 223
(custo de uma chamada local)
Qatar . . . . . . .00974 4257777 / 00974 4257844
Romania. . . . . . . . . . . . . . . . . . +40 021 204 9130
Russia . . . . . . . . . . . . . . . . . . . . . . 8 (495) 2281312
Saudi Arabia . . . . . . 00966 2 6500282 Ext. 209
Serbia . . . . . . . . . . . . . . . . . . . . . . . . .0800 222 111
Singapore . . . . . . . . . . . . . . . . . . . . . . . .6735 9100
Slovak Republic . . . . . 02 59 68 22 66 (4,428 sk)
Slovenija . . . . . . . . . . . . . . . . . . . . . . . 01 5644171
South Africa . . . . . . . . . . . . . . . +2711 46 13 181
Spain . . . . . . . . . . . . . . . . . . . . . . . . . . . 902 103935
Sweden . . . . . . . . . . . . . . . . . . . . . . . . .87 50 99 11
Switzerland . . . . . . . . . . . . . . . . . . . .0848 212 000
Taiwan . . . . . . . . . . . . . . . . . . . . . . . .02 266 24343
Turkey . . . . . . . . . . . . . . . . . . . . . . . 0216 459 98 59
Ukraine . . . . . . . . . . . . . . . . . . +380-44-451-71-72
United Arab Emirates . . . . . . . +97144458255/
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . +97144458254
United Kingdom . . . . . . . . . . . . 0 84 53 67 08 12
USA . . . . . . . . . . . . . . . . . . . . . . . . 1-866 247-8758
Vietnam . . . . . . . . . . . . . . . . . . . . . . .1900 545 416
Please have your record of purchase ready when calling. After sales service is not offered in countries where our product is not sold by authorised dealers.
Gigaset A410_A410A / IM_MEA en / A31008-M2402-R151-2-UZ19 / Bali_MEA_ar-fa.fm / 30.05.2012
20
Manufacturer warranty (Middle East)
On the purchase of your new Gigaset product, we guarantee that this equipment is a genuie manufacturer’s product and extend the following warranty:
We guarantee this product against manufacturing defects for two full years from the date of purchase, unless specified otherwise.
Adaptors and batteries for cordless phones carry 6 months warranty from the date of purchase.
Gigaset Communications authorized Service Centres will replace or repair, if necessary, any defective part/parts free of charge by presenting this certificate of warranty at the Service Centre mentioned overleaf.
This Certificate of warranty does not apply if the telephone has:
◆
Been misused, mishandled, willfull damaged, neglected, damaged by lightning, improperly repaired, tested, altered improperly in any way.
◆
A defect arising out of any failure to follow instructions either in the manual or product specification.
◆
In case repairs are carried out of by unauthorized personnel or unauthorized source warranty will be void.
◆
A defect arising from using non-Gigaset approved accessories or ancillary items attached to or in connection with the telephone.
◆
If this certificate of warranty is not signed and stamped by the authorised distributor.
◆
Any other claim resulting out of or in connection with the device shall be excluded from this warranty.
For Southern Africa:
In the event of an after-sales issue/warranty claim please refer back to your point of purchase.
Proof of purchase (receipt) has to be submitted.
Certificate of warranty (Middle East)
The warranty is not valid if it is not signed and stamped by the authorized distributor.
Please fill in the following details and stamp the card to validate the warranty.
All details must be filled in by the dealer and retained by the customer.
This warranty shall apply to products purchased in the Middle East only.
Customer’s Name: _________________________________________________________________
Product / Model: __________________________________________________________________
Dealer’s Name: ___________________________________________________________________
Date of Purchase: _________________________________________________________________
Invoice / Cash Memo Details: ________________________________________________________
Dealer’s Stamp
Gigaset A410_A410A / IM_MEA en / A31008-M2402-R151-2-UZ19 / Bali_MEA_ar-fa.fm / 30.05.2012
Service Centres (Midde East)
UAE
Customer Service Hotline UAE
TEL: 00971-4-4458255 / 00971-4-4458254
Service Collection Point www.technocare-prodigy.com
KARAMA
Sea Shell Electronics
Opp. Karama Centre
Dubai, UAE
Tel: 00971-4-3979228
Fax: 00971-4-3966205
Deira
Souvenier Mobiles,
Omar Bin Katab Road,
Oppst. Gulf Peral hotel (Tahir Hotel)
Al Baraha Street,
Tel: 00971-4-2731910 / 00971-4-2737377
Sharajah
Hotline Telecom
Sahara Centre
Sharjah, UAE
Tel: 00971-6-5312126
Al Ain
Phone Station
Al Ain Mall, Town Centre,
Tel: 00971-3-7515588
Fujairah
Al Manzil,
Al Gurfa Street,
Main market Road,
Tel: 00971-9-2233488
Oman
National Telephone Services Co. LLC
P.O. Box 2786 PC:112, Sultanate of Oman
Tel: +968-709281 Ext. 45/21/75
Fax: +968-791013
E-mail: [email protected]
Qatar
Modern Home,
51-East - Salwa Road,
Al-Maha Complex, Doha
Tel: 00974-4257844 / 00974-4257777
Fax: 00974-4314700
Bahrain
Authorized Service Center,
Bldg: 211, Rd: 339, Block: 321,
Old Place Road, Manama,
Tel: 00973-17311173
E-mail: [email protected]
21
Saudi Arabian Service Centers:
Ahmed Abdulwahed Trading Co.
Jeddah Service Center
Al-Amal Plaza, Hail Street,
Jeddeh, Saudi Arabia,
Tel: 02-6500282 Ext. 209
Riyadh Service Center
Olaya Street
Riyadh, Saudi Arabia,
Tel: 01-4622470 / 4623850
Khobar Service Centre
Al-Khobar Street,
Al-Khobar, Saudi Arabia,
Tel: 03-8944193/03-8952359
Madina Munawara
Al-Ayon Street,
Tel: 00966-4-8387931
Khamis Mushyat
Al-Khalidiya St.,
Tel: 00966-7-2230772
Tabuk
Main Street,
Tel: 00966-4-4219232
Kuwait
Customer Service Hotline Kuwait
Tel: 00965-22458737 / 00965-22458738
Al-Baptain Service Center
Shop #: 247
Qibla, Block 11,
Avenue 11,
Souk al Kabeer,
Fahad Al Salem Street,
Tel: 00965-2464993
Jordan
SEDR Home & office Electronics
Co - Tronicom
Wasfi Al-Tal St.,
Building No. 80,
2nd floor,
Tel: 00962-6-5625460/1/2
Lebanon
306, Jdeideh Sin el Fil Blvd,
Tel: 00961-1240259 / 00961-1236110
Gigaset A410_A410A / IM_MEA en / A31008-M2402-R151-2-UZ19 / Bali_MEA_ar-fa.fm / 30.05.2012
22
Environment
Our environmental statement
We at Gigaset Communications GmbH are aware of our social responsibility. That is why we actively take steps to create a better world. In all areas of our business – from product planning and production to sales and waste of disposal – following our environmental conscience in everything we do is of utmost importance to us.
Learn more about our earth-friendly products and processes online at www.gigaset.com.
Environmental management system
Gigaset Communications GmbH is certified pursuant to the international standards ISO 14001 and ISO 9001.
ISO 14001 (Environment): Certified since September 2007 by TüV SÜD Management Service GmbH.
ISO 9001 (Quality): Certified since 17/02/1994 by TüV SÜD Management Service GmbH.
Disposal
Batteries should not be disposed of in general household waste. Observe the local waste disposal regulations, details of which can be obtained from your local authority.
All electrical and electronic equipment must be disposed of separately from general household waste using the sites designated by local authorities.
If a product displays this symbol of a crossed-out rubbish bin, the product is subject to European Directive
2002/96/EC.
The appropriate disposal and separate collection of used equipment serve to prevent potential harm to the environment and to health. They are a precondition for the re-use and recycling of used electrical and electronic equipment.
For further information on disposing of your used equipment, please contact your local authority or your refuse collection service.
Gigaset A410_A410A / IM_MEA en / A31008-M2402-R151-2-UZ19 / Bali_MEA_ar-fa.fm / 30.05.2012
23
Menu overview
Your phone has an extensive range of features. These are offered in the form of menus.
To select a function while the phone is in idle status, press §Menu§ (open menu), use the control key q
to scroll to the function you require and press §OK§ to confirm.
To return to idle status: press and hold the a
key.
Not all of the functions described in this user guide are available in all countries.
é
Alarm Clock
Activation
Wake-upTime
è
Audio Settings
Handset Volume Earpiece/Speaker
Handset Sound
Ringer Volume
Ringer Melody
Advis.Tones
Low/High
External Calls/Internal Calls/Alarm Clock
On/off
Battery Low On/off
ê
Answer Machine
Play Messages
Answ. Mach. *
Net Mailbox ** Playing back messages on the network mailbox
Answ. Mach. ** Playing back messages on the answering machine
Activating/deactivating the answering machine
Call Screening *
Deactivate screening for the actual recording only: press end call key a
(Prerequisite: at least 1 handset with handsfree capability is registered.)
.
Announcements * Rec announce./Play announce./Del announce.
Message Length * Maximum/1 Minute/2 Minutes/3 Minutes
Ring Delay * Immediately/10 sec/18 sec/30 sec
Net Mailbox
Set Key 1 *
Language *
Auto If there are no new messages, the answering machine answers a call after
18 seconds. If new messages are present, the answering machine answers a call after just 10 seconds.
Enter number of the network mailbox
Net Mailbox Assign key
1
with network mailbox.
(In idle status, press and hold key
Answ. Mach.
Assign key
1
to dial.)
1
with answering machine.
(In idle status, press and hold key
1
to dial.)
* base station with answering machine only
** base station with answering machine only and number of network mailbox entered
Gigaset A410_A410A / IM_MEA en / A31008-M2402-R151-2-UZ19 / Bali_MEA_ar-fa.fm / 30.05.2012
ç
Settings
Date/Time
Handset
Base
24
Language
Big Dial Font
Contrast
Time Control
An.Call Silent
Auto Answer
Register HS
De-register HS
Reset Handset
Audio Settings
(A410A only)
Call list type
System PIN
Base Reset
Additional
Listening in
Preselection
Set bigger digits for dialling.
Set the display contrast to 9 levels.
Activation/Settings
Activate/deactivate auto answer
Ringer Volume
Presel. Number/With Preselect/Without Presel.
Ringer Melody
Time Control
Missed Calls/All Calls
Change system PIN (default is 0000).
Repeater
XES Mode Activating/deactivating
(Activate in case of problems with echos on an analogue port of a router.)
No Radiation/Max. Range
All rights reserved. Rights of modification reserved.
Gigaset Communications GmbH
Frankenstr. 2a, D-46395 Bocholt
© Gigaset Communications GmbH 2012
Subject to availability.
All rights reserved. www.gigaset.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 1 Gigaset A410/A410A
- 1 The handset at a glance
- 2 The base station at a glance
- 2 ECO DECT
- 3 Safety precautions
- 4 First steps
- 4 Check the package contents
- 4 Setting up the base station and charging cradle (if included)
- 4 Connecting the base station
- 4 Connecting the charging cradle (if included)
- 5 Setting up the handset for use
- 5 Inserting the batteries and closing the battery cover
- 5 Initial charging and discharging of the batteries
- 6 Changing the display language
- 6 Setting the date and time
- 6 Display in idle status
- 6 Activating/deactivating the handset
- 6 Menu guidance
- 6 Main menu (first menu level)
- 7 Submenus
- 7 Reverting to idle status
- 7 Making calls
- 7 Making external calls and ending calls
- 7 Accepting a call
- 7 Calling Line Identification
- 7 Handsfree operation
- 7 Muting
- 7 Automatic network provider preselection
- 8 Using the directory and lists
- 8 Directory
- 8 Storing the first number in the directory
- 8 Storing further numbers in the directory
- 8 Selecting a directory entry
- 8 Dialling with the directory
- 8 Using shortcut keys
- 9 Sending the directory to another handset
- 9 Last number redial list
- 9 Dialling from the last number redial list
- 9 Managing entries in the last number redial list
- 9 You can select the following settings:
- 9 Calls list/answering machine list/network mailbox list
- 9 Calls list
- 10 Answering machine list (A410A only) /Network mailbox list
- 10 Operating the answering machine (A410A only)
- 10 Activating/deactivating the answering machine
- 10 Recording your own announcement
- 10 Playing back or deleting announcements
- 10 Playing back/deleting messages
- 11 Additional functions during message playback
- 11 Accepting a call from the answering machine
- 11 Setting a different language
- 12 Operating when on the move (remote operation)
- 12 Calling the answering machine and playing messages
- 12 Activating the answering machine
- 12 Network mailbox
- 12 Locating a handset (paging)
- 12 Registering handsets manually
- 13 De-registering handsets
- 13 Using multiple handsets
- 13 Making internal calls
- 13 2 handsets are registered
- 13 More than 2 handsets are registered
- 13 Internal consultation call/connecting a call
- 13 Listening in to an external call
- 13 Activating/deactivating listening in
- 13 Internal listening in (conference)
- 13 Setting the alarm clock
- 13 Activating/deactivating the alarm clock
- 13 Setting the wake-up time
- 14 Phone settings
- 14 Changing the display language
- 14 Changing the handsfree/earpiece volume
- 14 Setting the sound of the earpiece
- 14 Setting ring tones of the handset
- 14 Setting the ringer volume
- 14 Setting the ringer melody
- 14 Time Control (day/night mode)
- 14 Anonymous calls silent
- 15 Activating/deactivating the ringer
- 15 Setting ring tones of the base station (A410A only)
- 15 Activating/deactivating music on hold
- 15 Repeater mode
- 15 Resetting the handset
- 15 Restoring the base station
- 15 Resetting the base station via the menu
- 15 Resetting the base station using the key on the base station
- 15 Operating the base station on the PABX/router
- 15 Operating on the router
- 15 Operating on the PABX
- 16 Appendix
- 16 Entering letters/characters
- 16 Standard characters
- 16 Technical Data
- 16 Batteries
- 16 Handset operating times/charging times
- 17 General specifications
- 17 Questions and answers
- 17 Contact with liquid
- 17 Authorisation
- 18 Customer Service & Assistance
- 20 Manufacturer warranty (Middle East)
- 20 For Southern Africa:
- 20 Certificate of warranty (Middle East)
- 21 UAE
- 21 Saudi Arabian Service Centers:
- 21 Ahmed Abdulwahed Trading Co.
- 21 Jeddah Service Center
- 21 Riyadh Service Center
- 21 Khobar Service Centre
- 21 Madina Munawara
- 21 Khamis Mushyat
- 21 Tabuk
- 21 Kuwait
- 21 Customer Service Hotline Kuwait
- 21 Jordan
- 21 Lebanon
- 22 Environment
- 22 Our environmental statement
- 22 Environmental management system
- 22 Disposal
- 23 Menu overview