STANLEY Wi-Q TECHNOLOGY
STANLEY
Wi-Q TECHNOLOGY
®
™
WIRELESS ACCESS MANAGEMENT
TABLE OF CONTENTS
TABLE OF CONTENTS
Page
Introduction . .................................................................................. 2
Software ......................................................................................... 2
Wireless intelligent option diagram..............................................3
Locking hardware features.......................................................... 3
Wireless portal gateway – standard door................................. 4
Wireless access controller & features...................................... 4
Outdoor Bi Directional/parking gate........................................... 5
Mortise lock & features................................................................ 6
Page
Cylindrical lock & features................................................................ 7
Accessories......................................................................................... 7
Exit trim & feature............................................................................... 8
Exit compatibiliy chart........................................................................ 8
Reader types ......................................................................................... 9
Components....................................................................................... 10
How to order...................................................................................... 11
Product selection chart................................................................... 12
INTRODUCTION
The Stanley® Wi-Q™ Wireless Technology is a smart, fast, efficient wireless access control solution that will change the way you look
at wireless access control. The system’s 128 bit AES security encryption and ultra-smart power consumption provide unsurpassed
access control benefits with lower installation costs. Multiple redundancy of the access control data at the reader, gateway and host
computer means the system makes the access control decision at the door when the card is presented. Stanley also built this advanced
technology into its existing line of access control solutions so one application can now control the BEST® offline, wireless and online
access control doors, CCTV and ID Badging.
The Stanley Wi-Q Wireless Technology utilizes the proven heavy duty BEST electronic locksets which include our 9KQ, 45HQ and EXQ
products. We didn’t want to stop there, so we included online features such as a door position switch, request-to-exit sensor, a latch
switch sensor and even a key override sensor as standard in our mortise lineup. In addition to these on the door applications, we also
offer our Wireless Access Controller (WAC) module that provides wireless control for parking gates, turnstiles, electromagnetic locks,
electric strikes and many other electronic devices.
The Stanley Wi-Q Technology Wireless Access Solution brings intelligent power to your access control needs. Its overall design gives
you upgrade ability and scalability to go from very small secure solutions to extremely large solutions. If you have been waiting for
uncompromising wireless intelligence to show up at your door, Stanley Wi-Q Wireless Technology has arrived.
covered
by one or more of the following patents:
Products
Wi-Q – SOFTWARE
5,590,5555,794,472
5,083,1226,720,861 Other products patent pending.
Wi-Q — Software
DESCRIPTION
PART #
Wi-Q Software
B.A.S.I.S. 32ES Server* (base support for 32 readers, can be upgraded to 64)
WQS-SWS-32ES
B.A.S.I.S. 32ES Client
WQS-SWC-32ES
B.A.S.I.S. 32ES Server with Integrated Badging
WQS-SWS-32ESI
B.A.S.I.S. ADV* (base support for 64 readers, can be upgraded to 256 readers)
WQS-SWS-ADV
B.A.S.I.S. ADV & PRO Client
WQS-SWC-ADV
B.A.S.I.S. ADV with Integrated Badging
WQS-SWS-ADVI
B.A.S.I.S. PRO* (base support for 128 readers, can be upgraded to unlimited)
WQS-SWS-PRO
B.A.S.I.S. Interface Software
WQS-BAS-INT
Stanley Wi-Q Access Management Software
WQS-SWAT
*Requires Stanley Wi-Q B.A.S.I.S. Interface Software
**Includes Stanley Wi-Q Access Control Software (WQS-SWAT)
B.A.S.I.S. 32 Reader Upgrade for 32ES System
WQS-32ES-W-32RUP-WQ
B.A.S.I.S. ADV and PRO reader upgrade (blocks of 64 readers)
WQS-PRO-W-64RUP-WQ
Note:
• Normal B.A.S.I.S.® software upgrade licenses apply. (Base software and 32 or 64 reader blocks)
• Wi-Q systems offer capacity for up to 64 readers per portal gateway and up to 18,000 credentials per reader. Total
number of readers and users that can be supported in a system depends on several factors - please contact your
Stanley representative for more detail.
2
WIRELESS ACCESS SOLUTIONS
Local Door
Interface board
DS
Local
AC Power
RQE
1
4
7
*
2
5
WIRELESS INTELLIGENT OPTION
STANLEY Wi-Q TECHNOLOGY WIRELESS ACCESS
MANAGEMENT SYSTEM ­— THE INTELLIGENT OPTION
3
6
8
9
0
#
Card
Reader
Strike /
Lock Power
•Includes electronic locking device
•Includes card reader
•Includes door position switch
•Includes request to exit device
•Includes door control module
•No wiring or terminations needed
•Connects wirelessly to remote
Portal Gateway
Installation approximately 6-8 hours
Installation approximately 1-2 hours
Standard Hardwired System
BEST® Wireless
LOCKING HARDWARE — FEATURES
• Dynamic memory up to 18,000 credentials per reader
• Each reader has its own unique MAC address
• Battery-powered by ‘AA’ battery case (battery pack optional)
• All intelligence is at the door, NOT at a controller
• Standard Integrated Door Switch (DS), Latch Switch (LS), Request-to-Exit (RQE) and Key Override Sensor (KOS) on BEST® mortise chassis
• Standard Integrated DS, and RQE on BEST® cylindrical chassis.
• Standard Integrated DS, LS, RQE on EX chassis with the Precision™ exit device line.
• Approximately 7.9K-Event audit trail stored dynamically at reader
• 512 time zone user groups per reader with 6 intervals each
• ADA compliant locksets
• Available in cylindrical, mortise, exit device, and wireless access controller configurations
• Magnetic stripe/PIN Dual-validation, HID, iClass and Indala proximity reader technology
• Two processors for efficient and reliable transfers of data and firmware updates
• Remote reader diagnostics from PC (battery level and signal strength of each lock)
WIRELESS ACCESS SOLUTIONS
HARDWARE FEATURES
• Install electrified locking device
• Install external card reader
• Install external door position switch
• Install request to exit device(s)
• Install door control module
• Terminate all door connections
• Run wire from door control module
to head-end controller
3
WIRELESS PORTAL GATEWAY
WIRELESS PORTAL GATEWAY — STANDARD DOOR
2.4GHz
Spread
Spectrum
Static IP
Address
WQX-PG
Portal Gateway
AES 128 Bit
Encryption
1
2
3
4
5
6
7
8
9
0
#
*
POE
Ethernet 10/100/1000 BaseT
or
120V AC Secure Socket
Wireless Network Ready
Stanley® Wi-Q™
Wireless Technology
Lock
(to power 12V DC plug in
transformer supplied with PG)
Host
WIRELESS PORTAL GATEWAY — FEATURES
• Communicates at 2.4GHz spread spectrum to wireless readers or wireless access controllers
• Uses 802.15.4 protocol with clear channels above 802.11 to allow Wi-Fi interoperability
• 10/100/1000 Base-T bit Ethernet
• Provides redundant communication (locks attached to the strongest signal)*
• Non-dedicated portal can communicate with 1 to 64 readers (Does not imply that 64 readers/locks will be within distance of
RF range to connect. Total number of portal gateways required is based on individual system survey and requirements.)
• Does not require typical controller hardwiring, simply plug the Portal Gateway
into an existing TCP/IP network and provide local power.
*Wi-Q™ AMS only feature and not available in B.A.S.I.S.®
4
WIRELESS ACCESS SOLUTIONS
Wireless Access Controller (WAC) for turnstiles, parking gate arms, store front entry doors and existing hard-wired card access
doors in retrofit applications.
Directional
Antenna
Turnstile connected via WAC and
an outdoor directional antenna
WQX-WAC
Wireless Access Controller
NEMA Enclosure
– Local Power
IN
WIRELESS ACCESS CONTROLLER
WIRELESS ACCESS CONTROLLER
OUT
WIRELESS ACCESS CONTROLLER — FEATURES
• Provides wireless control of electric locks on glass/aluminum doors
• Provides relay control for various locking devices
• Recommended for exterior door applications
• Existing wired system can be converted to wireless technology
• 2 output relays (Form-C) control external devices (alarms, electrified hardware, etc.)
• Monitors door latch, door status and request-to-exit
• Facilitates ADA compliance to control auto open type doors
Directional
• Provide control for local door alarm/sounders for door held open events
Antenna
Gate
Operator
Loop Detector
INSIDE
NEMA Enclosure
– Local Power
Outdoor Parking
Gate Application
Loop Detector
OUTSIDE
WIRELESS ACCESS SOLUTIONS
5
MORTISE LOCK
MORTISE LOCK
45HQ
Proximity Reader
UltraShield
™
Case: 0.095” cold rolled steel, 5 7/8” (149mm) H x 7/8” (22mm) D x 4 1/16” (149mm) W. Steel is zinc dichromate
plated for corrosion protection.
Faceplate: Brass or bronze material, 8” (203mm) H x 1 1/4” (31mm) W x 1/16” (1mm) T. Lock face automatically
adjusts to proper bevel during installation.
Strike: Brass, bronze, or stainless steel base material, 4 7/8” (124mm) H x 1 1/4” (31mm) W x 3/32” (2mm) T. Fits
standard door frame cut-out as specified in ANSI A115.1. Universal (non-handed) strike supplied
standard with lock.
Backset: 2 3/4” (69mm)
Door thickness: Standard lock configuration designed for doors 1 3/4” thick. Thick door
configuration available for door to 3” thick (specify thickness when ordering).
Latchbolt: Solid stainless steel, 3/4” (19mm) throw. Latch is oil-impregnated for anti-friction
operation. Reversible without opening case.
Deadbolt: Stainless steel, 1” (25mm) throw.
Auxiliary bolt: Stainless steel, non-handed.
Lever handle: Brass, bronze, or stainless steel base material. Lever styles 3, 14, and 15 return to
a minimum of 1/2” (12mm) of door surface. Levers 12, 16, and 17 do not return.
Escutcheons: 10 1/2” (267mm) H x 3 5/16” (84mm) W x 1” (25mm) D (1” (25mm) at the top, sloping down to 3/4”
(19mm) at the bottom)
Finishes:
605 – bright brass, clear coated
625 – bright chromium plated
606 – satin brass, clear coated
626 – satin chromium plated
611 – bright bronze, clear coated
629 – bright stainless steel
612 – satin bronze, clear coated
630 – satin stainless steel
613* – oxidized satin bronze, oil rubbed 690** – dark bronze powder coated
Antimicrobial Finishes
626AM – Satin Chrome Plated with UltraShield Antimicrobial coating
630AM – Satin Stainless Steel with UltraShield Antimicrobial coating
* 613 finish is designed to wear over time, providing an “antique” appearance.
** 690 finish will continue as a dark brown appearance over time.
ADA-Americans With Disabilities Act:
The design and operation of the mortise lock meets the intent of the standard for ANSI A117.1 section 404.2.6.
Builders Hardware Manufacturers Association:
ANSI A156.13, Series 1000, Grade 1 Operational, Strength, and Security. To meet Grade 1 Security, drill resistant cores
Underwriters Laboratories®
The 40H series is listed by Underwriters Laboratories for use on a 3 hour A label doors. These locks also carry the C-UL mark which is officially
accepted in all of Canada, indicating compliance with appropriate Canadian standards and codes.
UltraShield™
The UltraShield protection is limited to the product’s surface and is not meant to be a substitute for good hygiene. Stanley recommends
instituting and maintaining a thorough cleaning regimen of all your door hardware.
MORTISE LOCK — FUNCTIONS
TV
Deadbolt with
key override
6
Latchbolt operated by:
• Outside key
• Outside lever - unless locked by
internal motor drive mechanism
• Inside lever
Latchbolt deadlocked by:
• Auxiliary latch
Deadbolt operated by:
• Outside key
• Inside turn knob
• Outside lever when lever is unlocked
by internal motor drive mechanism
(retracts only)
• Inside lever (retracts only)
Outside lever locked and unlocked by:
• Internal motor drive mechanism
operated by time-activated electronic
signal or by valid card/PIN
Inside lever is always unlocked
DV
Latchbolt with
key override
Latchbolt operated by:
• Outside key
• Outside lever - unless locked by
internal motor drive mechanism
• Inside lever
Latchbolt deadlocked by:
• Auxiliary latch
Outside lever locked and unlocked by:
• Internal motor drive mechanism
operated by time-activated electronic
signal or by valid card/PIN
Inside lever is always unlocked
WIRELESS ACCESS SOLUTIONS
Materials: Internal parts are brass, zinc, or corrosion-treated steel.
Chassis: 2 1/16” (52mm) diameter to fit 2 1/8” (53mm) diameter hole in door.
Strike: Brass, bronze, or stainless steel base material; STK 2 ¾” (69mm) H standard,
STK3 4 7/8” (123mm) H. Fits standard door frame cut out as specified in ANSI A115.1.
Strike box supplied as standard.
Backset: 2 3/4” (69mm) standard, 3 3/4” (95mm) and 5” (127mm) available.
Door thickness: Standard lock configuration designed for doors 1 3/4” (44mm) – 2 1/4” (57mm)thick.
Core housing: 7-pin core.
Latchbolt: 9/16” (24mm)
Lever handle: Manufactured from high quality zinc alloy, coated to match specified finish.
Body is approximately 1 5/8” (41mm) in diameter; handle is approximately 4 3/4” (120mm) in length
(from center of chassis). Lever styles 14 and 15 return to a minimum of 1/2” (12mm) of door
surface. Lever 16 does not return.
Escutcheons: 10 1/2” (267mm) H x 3 5/16” (84mm) W x 1” (25mm) D (1” (25mm) at the top, sloping down to
3/4” (19mm) at the bottom).
Finishes:
605 – bright brass, clear coated 625 – bright chromium plated (brass base material)
606 – satin brass, clear coated
626 – satin chromium plated (brass base material)
612 – satin bronze, clear coated 690** – dark bronze coated (brass base material)
Antimicrobial finishes
626AM – Satin Chrome Plated with UltraShield™ Antimicrobial coating
630AM – Satin Stainless Steel with UltraShield™ Antimicrobial coating
** 690 finish will continue as a dark brown appearance over time.
CYLINDRICAL LOCK
CYLINDRICAL LOCK
9KQ
Dual Validation Reader
UltraShield
™
See page 6 for certification descriptions.
CYLINDRICAL LOCK — FUNCTION
DV
Latchbolt with
key override
Latchbolt operated by:
• Outside key
• Outside lever - unless locked by internal motor
drive mechanism
• Inside lever
Outside lever locked by:
• Internal motor drive mechanism operated by
time-activated electronic signal or by valid
card/PIN
Latchbolt is deadlocked
Outside lever unlocked by:
• Internal motor drive mechanism operated by
time-activated electronic signal or by valid card/PIN
Inside lever is always unlocked
ACCESSORIES
WQD-12928-001
POE Splitter
with Ferrite
NTD36012OWBK
Magnetic Card
Access Reader
NTD36012OWB
Dual Validation
Reader
HD-5365EGP00
HID Proximity
Reader
WIRELESS ACCESS SOLUTIONS
WQD-12929-001
POE Injector
WQD-12873-001
Dial-up to Ethernet Modem
7
EXIT TRIM
EXIT TRIM
Materials: Internal parts are brass, zinc, or corrosion-treated steel.
Escutcheons: 10 5/8” (295mm) H x 3 5/16” (84mm) W x 1” (25mm) D. (1” (25mm) at the top,
sloping down to 3/4” (19mm) at the bottom)
Door thickness: Standard lock configuration designed for doors 1 3/4” (44mm) – 2 1/4”
(57mm) thick.
Lever handle: Brass, bronze, or stainless steel base material. Lever styles 14 and 15 return
to a minimum of 1/2” (12mm) of door surface.
Finishes:
606 – satin brass, clear coated
613* – oxidized satin bronze, oil rubbed
626 – satin chromium plated (brass base material)
690** – dark bronze coated (brass base material)
Antimicrobial finishes:
626AM – Satin Chrome Plated with UltraShield™ Antimicrobial coating
630AM – Satin Stainless Steel with UltraShield™ Antimicrobial coating
* 613 finish is designed to wear over time, providing an “antique” appearance.
** 690 finish will continue as a dark brown appearance over time.
Exterior trim assembly compatible to exit hardware from
Precision™, Von Duprin™, or Sargent™ 8000 rim device.
•Provides online lock capabilities for applications where building code requires exit hardware
•Exit trim comes standard with Door Position Switch (DS). It also comes with
lead wires to connect to an optional Request-to-Exit (RQE) switch and an optional
latch position switch available with the Precision line of exit devices.
•Request-to-Exit (RQE) & Latch Position Switch (LS) not available on Precision mortise
•The actual Request-to-Exit (RQE) & Latch Position Switch (LS) are never
included with the EXQ trim. Those switches must be purchased separately.
•All EXQ trim must be installed by a Stanley® Certified
Technician or warranty will be voided
•Exit hardware sold separately
EXQ
Magnetic Stripe Reader
UltraShield
™
See page 6 for certification descriptions.
EXIT TRIM — FUNCTIONS
EV
With key
override
Latchbolt operated by:
• Outside key
• Outside lever-unless locked by internal motor drive
mechanism
• Touchbar
Outside lever locked by:
• Internal motor drive mechanism operated by
time-activated electronic signal
Outside lever unlocked by:
• Internal motor drive mechanism operated by
time-activated electronic signal or by valid card/PIN
Inside hardware is always unlocked
EXIT TRIM — COMPATIBILITY CHART
Device Type
Precision
2000
8
Von Duprin
98/99
Sargent
8800
Rim – w/o key override
2103
98TP, 99TP, 98L, 99L
8828, 8863, 8866
Surface Vertical Rod – w/o key override
2203
9827TP, 9947TP, 9827L, 9927L
N/A
Concealed Vertical Rod – w/o key override
2703
9847TP, 9847TP, 9847L, 9947L
N/A
Rim – with key override
2103
98TP, 99TP, 98L, 99L
N/A
Surface Vertical Rod – with key override
2203
9827TP, 9947TP, 9827L, 9927L
N/A
Concealed Vertical Rod – with key override
2703
9847TP, 9947TP, 9847L, 9947L
N/A
WIRELESS ACCESS SOLUTIONS
DOOR HARDWARE INTEGRATED
Sealing: Weatherproof lens and gasket provides
protection for outdoor use (usable in most
environmental/exterior applications).
FCC Compliance: Compliant with US, Canadian,
and European EMC requirements, and for FCC
Class A digital apparatus interference.
MAGNETIC STRIPE — READER
Magnetic Stripe Reader:
Bezel Size: 2 5/8” (66mm) x 3 1/4” (82mm)
Bezel Material: High impact ABS.
ESD Protection: 15 kilovolts
Read Rate: 5 inches per second to 50 inches per second.
Card Thickness: ISO standard .030” ± .003 thick.
Operating Temperature: -40°F to 167°F (-40°C to 75°C.)
Relative Humidity: 100%.
9KQ, 45HQ, EXQ
Magnetic Stripe Reader
PROXIMITY — READER
HID Proximity Reader:
Bezel Size: 2 5/8” (66mm) x 3 1/4” (82mm)
Bezel Material: High impact ABS.
ESD Protection: 15 kilovolts.
Operating Temperature: -31°F to 149°F (-30°C to 65°C.)
Relative Humidity: 0-95%.
MAGNETIC STRIPE
Specifications for all readers:
Primary Power: Battery pack.
User Feedback Indicators: Visual and audible.
Lock reader types supports:
• Magnetic stripe
• Indala® proximity
• HID® proximity 125KHz
• Dual validation (magnetic stripe plus keypad)
• HID® iClass
PROXIMITY
The Stanley Wi-Q Access Control Solutions supports:
• BEST® Mortise locks • Precision™ Exit devices
• BEST Cylindrical locks • Stanley Wireless Access Controller platforms
™
HARDWARE
LOCKING HARDWARE TYPES AND TECHNOLOGIES
®
Indala Proximity Reader:
Bezel Size: 2 5/8” (66mm) x 3 1/4” (82mm)
Bezel Material: High impact ABS.
ESD protection: 15 kilovolts.
Operating temperature: -31°F to 149°F (-30°C to 65°C.)
9KQ, 45HQ, EXQ
HID 125 kHz or iClass Proximity
Reader or Indala Proximity Reader
Note: Can be used in direct sunlight.
DUAL VALIDATION — READER
Dual Validation Reader:
Bezel Size: 2 13/16” (71mm) x 3 1/2” (89mm)
Bezel Material: High impact ABS.
Keypad Material: Encapsulated elastomer.
ESD Protection: 15 kilovolts.
Keypad Button Operating Life: 1 million cycles.
Operating Temperature: -31°F to +151°F (-35°C to +66°C).
9KQ, 45HQ, EXQ
Dual Validation
WIRELESS ACCESS SOLUTIONS
DUAL VALIDATION
9
STANLEY Wi-Q COMPONENTS
STANLEY® Wi-Q™ COMPONENTS
Portal Gateways (PG):
Part #
Portal Gateway for up to 64 Readers/Locks* with half wave dipole omnidirectional
antenna (should only be used where PG is mounted in an open area (not in a ceiling or
restricted signal area)
WQX-PG
Portal Gateway for up to 64 Readers/Locks* with ceiling mount omnidirectional antenna
WQX-PGC
Portal Gateway with enclosure, power supply and ceiling mount omnidirectional antenna
WQX-PG-C-B
Portal Gateway for up to 64 Readers/Locks* with wall mount directional antenna
Portal Gateway with enclosure, power supply and wall mount directional antenna
Portal Gateway with enclosure, power supply, and outdoor
mast mount directional antenna
Portal Gateway with enclosure, power supply, and outdoor
mast mount omnidirectional antenna
* Does not imply that 64 readers/locks will be within distance/RF range to connect.
Total number of portal gates is based on individual system survey and requirements.
Wireless Access Controllers (WAC):
Wireless Access Controller (WAC) with half wave dipole omnidirectional antenna
(should only be used where WAC is mounted in an open area (not in a ceiling or
restricted signal area)
Wireless Access Controller with ceiling mount omnidirectional antenna
Wireless Access Controller in enclosure with power supply and ceiling mount
Omni-directional antenna
Wireless Access Controller with wall mount directional antenna
Wireless Access Controller in enclosure with power supply and wall mount directional
antenna
Wireless Access Controller in Nema enclosure with power supply and exterior directional
antenna
Wireless Access Controller in Nema enclosure with power supply and exterior amnia
directional antenna
Power and adapters:
WQX-PG-W
WQX-PG-W-B
WQX-PG-D-B
WQX-PG-O-B
Part #
WQX-WAC
WQX-WAC-C
WQX-WAC-C-B
WQX-WAC-W
WQX-WAC-W-B
WQX-WAC-D-BW
WQX-WAC-O-BW
Part #
Plug in Transformer (wall-mount) with 6' of cable
WQD-12827
Power over Ethernet Power Supply/Inserter
WQD-12927-001
Power over Ethernet Active Splitter with Isolation
WQD-12928-001
Dial-up to Ethernet Modem
WQD-12873-001
WI-Q™ Antenna's:
2.4 GHz Interior Ceiling Mount Omnidirectional Antenna Kit*
Part #
WQD-ACMO
2.4 GHz Interior Wall mount directional antenna Kit*
WQD-AWMD
2.4GHZ Exterior directional antenna***
WQD-AEMD
2.4GHZ Exterior omnidirectional mast mount
WQD-AEMO
Exterior Antenna Grounding Kit***
WQD-AGT
Surge Protection Kit
WQD-SURG
* Antenna Kit includes: antenna, standard mount and 20’ cable to connect to PG or WAC
** Antenna Kit includes: antenna, wall and post mounts and 20’ cable to connect to WAC or PG
*** Grounding Kit includes: coax grounding kit and lightning arrestor
10
WIRELESS ACCESS SOLUTIONS
7
TV
15
MS
Series
Core
Housing
Function
Code
Lever/Knob
Style
Trim
Style
45HQ –
mortise
wireless
0 – keyless
7 – 7 pin IC
housing
accepts
all BEST
cores
DV – Latch
w/key
TV –
Deadbolt
w/key
LV –
Deadbolt
w/o key
NV – Latch
w/o key
3** – solid tube with
return
4 – round knob
12 – solid tube/ no return
14 – curved return
15 – contour angle
return
16 – contour angle/
no return
17 – gull wing/ no return
626
RH
Door
Finish Hand
MS – magstripe
DV – dual validation
(magstripe & keypad)
PH – HID® proximity
SC – HID® iClass®
PM – Indala® proximity
DVA – other cyl.
MSA – other cyl.
PHA – other cyl.
PMA – other cyl.
626 630
690
Satin*
606 612
613
RH
RHRB
LH
LHRB
Bright*
605 611
625 629
Options
8CE* – extended life battery pack
KOS* – key override sensor
SH* – security head screws
Thick door* – specify thickness
TAC* – Tactile lever
7/8" LTC – Flat lip strike
4SW - Shrink wrap battery
HOW TO ORDER
MORTISE LOCKS
45HQ
CYLINDRICAL LOCKS
9KQ3
Series
Backset
7
Core
Housing
9KQ3 – 2-3/4"
0 – keyless
6 – 6 pin
non-IC
cylinder
7 – 7 pin IC
housing
accepts
all
BEST
cores
(69mm)
9KQ4* – 3-3/4"
(95mm)
9KQ5* – 5"
(127mm)
wireless
DV
Function
Code
15
Lever
Style
DV – with 14 – curved
return
key
override 15 – contour
angle
return
16 – curved
without
return
MS
Trim
Style
626
STK
Strike
Package
MS – mag
STK –
stripe
standard
DV – dual
S3 – ANSI
validation
(magstripe
+ keypad)
PH – HID®
proximity
SC – HID®
iClass®
PM – Indala®
proximity
Finish
Options
626 690 8CE* – extended life battery pack
LM – lost motion
Satin* SH* – security head screws
606 612 TAC* – tactile lever
3/4* – 3/4" (19mm) throw latch
Bright* OB** – non-IC zero-bitted
605 625 COR*** – non IC Corbin/Russwin
MED*** – non IC Medeco
SAR*** – non IC Sargent
SCH*** – non IC Schlage
YAL*** – non IC Yale
SCHRC*** – non IC Schlage
removable core (14 & 15 lever only)
4SW – Shrink Wrap Battery
Wireless locks come with Integrated Door Hardware (IDH) as standard – Request -to-Exit (RQE). Door positon switch (DS) and latch bolt monitor switch (LS)
* Indicates extra cost option.
** Six-pin cylinder in Schlage® “C” keyway included with 0B, KA, KD options. Must specify “6” for core housing.
*** Cylinder not included with COR, MED, SAR, SCH, YAL, or SCHRC options. Must specify “0” for core housing.
EXIT TRIM
EXQ
Series
7
Core
Housing
0** –
EXQ –
keyless
wireless
7 – 7 pin IC
housing
accepts
all BEST
cores
EV
15
Function
Lever
Code
Style
EV – with 14 – Curved
key**
return
15 – Contour
angle
return
MS
Trim
Style
MS – magstripe
DV – dual validation
(magstripe +
keypad)
PH – HID proximity
SC – HID iClass
PM – Indala proximity
RHRB
PH2
Door
Finish Hand
Manufacturer
626 RHRB VD9 – Von Duprin
690 LHRB
98/99 series
PH2 – Precision
Satin*
Hardware
606
2000 series
613
SA8 – Sargent
8000 series***
626
RM
Locking
Options
Type
SH* –
RM – rim***
security
MO – mortise
head
RD – surface
screws
and conThick Door*
cealed
vertical
– specify
rods
thickness
Wireless locks come with door position switch (DS) and connector/input to connect to Request-to-Exit (RQE) switch inside exit device.
Latch switch monitoring capability is available for Precision™ Exit devices that include the latch monitor option.
* Indicates extra cost option. **The EV function (key override) is not available on the Von Duprin™ mortise type or Sargent™ rim type device.
*** SA8 Only available with rim type device.
Series
WQCNKT-1 –
Cylindrical wireless
upgrade kit
WIRELESS CONVERSION KITS
Kit to convert a B.A.S.I.S.® 9K V/G stand-alone lockset to a Stanley® Wi-Q™ Wireless Lockset.
Note: Kit includes a new 9K chassis with new motor, RQE hub and door position switch.
WQCNKT-2 –
Kit to convert a B.A.S.I.S. 35H V/G or B.A.S.I.S. 45H V/G stand-alone lockset to a Stanley Wi-Q Wireless Lockset.
Mortise DV function
Note: Kit also contains a new 45H DV mortise case which includes RQE, Door Position Switch,
(without deadbolt)
Latch Position Switch, and Key Override Sensor to provide full alarm functionality.
wireless upgrade kit
with alarm functionality
WQCNKT-3 –
Kit to convert a B.A.S.I.S. 35H V/G or B.A.S.I.S. 45H V/G stand-alone lockset to a Stanley Wi-Q Wireless Lockset.
Mortise TV function
Note: Kit also contains a new 45H TV mortise case which includes RQE, Door Position Switch,
(with deadbolt)
Deadbolt Position Switch, and Key Override Sensor to provide full alarm functionality.
wireless upgrade kit
with alarm functionality
Upgrade kits must be installed by a Stanley Security Solutions technician for warranty purposes.
WIRELESS ACCESS SOLUTIONS
11
®
STANLEY Wi-Q™ AT A GLANCE
HARDWARE FEATURES
Battery Operated
Programed with Computer at Central Location
18,000 Users per Lock
Audit Trail Function
Number of Time Zones - 512 * 6 Intervals (3,072)
Key Override Capability
Dual Validation Keypad/Mag Reader
Pin #’s vary in length from 4-9 characters
Mag Stripe Reader
Prox Reader
Exit Trim Available
Decision made at reader
Wi-Q 3.0
SOFTWARE FEATURES
Door Controllers Per System
Sign On/Configuration Tool
(ie - PDA) Required
Door Controllers Per Access Point
Intelligence At The Door
B.A.S.I.S.® Software Compatible
Lenel OnGuard® Compatible
FIPS 201
iCLASS
Dual Mag Stripe Keypad
TWIC
CAC
5,000*
NO
64
YES
YES
YES
Coming Soon
YES
YES
Coming Soon
Coming Soon
*These numbers have the ability to be much higher or
lower depending on the users system configuration.
Stanley Security Solutions, Inc.
6161 E. 75th Street Indianapolis, Indiana 46250
© 2012 Stanley Security Solutions, Inc. | www.stanleysecuritysolutions.com
0612
17875 S3