Yamaha Club Series IV Specifications

Speakers
Behringer ...........................................772-774
EAW .................................................................775
Electro Voice ....................................776-777
FBT .........................................................778-779
JBL ..........................................................780-783
Mackie .................................................784-785
Samson ...............................................786-788
Turbosound ................................................789
Yamaha ...............................................790-795
The
SourceBook
A/VPresentation
PHOTO - VIDEO - PRO AUDIO
Section12D
Obtaining information and ordering from B&H is quick and
easy. When you call us, just punch in the corresponding
Quick Dial number anytime during our welcome message.
The Quick Dial code then directs you to the specific
professional sales associates in our order department.
For Section 12D, Speakers,
use Quick Dial #: 92
772
SPEAKERS
BEHRINGER
EUROLIVE PERFORMER SERIES
400-Watt PA Loudspeaker/Floor Monitors
Behringer’s most affordable, full range loudspeakers, the Performer Series is
comprised of the E1220 with a 12” long excursion woofer and 1” horn driver,
and the E1520 which offers a deeper 15” woofer. Both loudspeakers offer power
handling of 400 watts (peak), wide dispersion characteristics and a wide
frequency response suitable for delivering powerful music and speech to a
large audience. The E1220 and E1520’s flexible design allows the monitors to be
stacked, stand mounted or used as floor monitors, and their rugged construction
ensures that they will put up with any abuse that the road can throw at them.
◆ Extremely powerful 12” (E1220) and 15”
(E1520) long-excursion drivers provide
incredibly deep bass and acoustic power
◆ Proprietary 1” HF driver for exceptional
high-frequency reproduction
◆ Ultra-wide 55Hz - 20kHz frequency range
(-10dB), impedance 8 ohms
◆ Proprietary horn design for ultra-wide
sound dispersion
◆ High SPL (sound pressure level of 93dB)
◆ Overload-protection circuitry ensures opti-
mal HF driver protection.
◆ Neutrik Speakon-compatible connectors
◆ High-quality components and exceptionally
rugged construction ensure long life
◆ Versatile enclosure profile allows different
positioning:
- 10 and 35° luster and stacking mode
- stand mounting with 35mm pole socket
- floor monitor wedge.
◆ Rugged steel grill for optimal speaker
protection and ergonomically shaped
handles for easy transportation.
EUROLIVE PROFESSIONAL SERIES
800-Watt PA Loudspeaker/Floor Monitors
Rugged high performance loudspeakers, the affordable Eurolive Professional Series
consists of the B1220 and B1520. Designed for PA applications and for use as floor
monitors, the B1220 features a 12” long excursion bass driver and a 13⁄4” titanium
diaphragm compression driver and can handle 800 watts of continuous program.
The B1520 offers the same 800 watt capability with a larger (15”) bass driver, for even
deeper bass. Both feature a flexible enclosure design that allows a variety of speaker
positions including 10 and 35° cluster and stacking modes, stand mounting with the
35mm pole socket or positioning as a floor monitor wedge.
◆ Passive 800 watt (peak) / 400 watt (RMS) speakers with 12” (B1220) or 15”
(B1520) long-excursion drivers and 1.75” titanium diaphragm compression
driver deliver powerful deep lows and crystal clear open highs.
◆ They feature a wide frequency range of 55Hz -18kHz (B1220) and
50Hz-18kHz (-10dB), impedance 8 ohms.
◆ Enclosure design allows a variety of positioning:
- 10° and 35° cluster and stacking mode
- Stand mounting with 35mm pole socket
- Floor monitor wedge
◆ 95dB (B1220), 96dB (B1520) SPL.
◆ Parallel input connectors allow linking of additional loudspeakers.
◆ Rotatable horn design allows driver adjustment for horizontal or vertical
◆ Comfortably shaped handles for easy transport and rugged steel
speaker grills.
positioning.
◆ HF driver overload-protection circuitry.
PHOTO - VIDEO - PRO AUDIO
www.bhphotovideo.com
◆ Neutrik Speakon-compatible speaker connectors.
SPEAKERS
BEHRINGER
773
EUROLIVE E1800X
Professional 800-Watt
18” PA Subwoofer
Behringer’s most affordable, passive subwoofer, the E1800X is the ideal low end
extender for use with the Eurolive Performer Series. Featuring an 18” bass driver
with a 45HZ - 300Hz frequency range and the ability to handle up to 800 watts,
the E1800X will deliver serious bottom end to your live sound reinforcement rig.
A switchable crossover is also provided for bi-amping applications. Professional
Neutrik Speakon compatible connectors provide a secure connection for speaker
cables. Additional features include rugged steel speaker grill, easy access handles
and a pole socket for compatibility with commercial spacer poles.
EUROLIVE B1800X
1600-Watt 18” PA Subwoofer
The B1800X is Behringer’s top-of-the-line live sound reinforcement subwoofer.
It delivers up to 1600 watts of tight bottom end using an 18” long-excursion bass
driver producing sound pressure levels (100 dB half space 1 W @ 1 m) in the
frequency range of 40 - 300Hz. The built in crossover is switchable to allow for
optional passive or bi-amping operating modes. Professional Neutrik Speakon
compatible speaker connectors are provided for securely connecting to
amplification. Additional features include a rugged, protective steel speaker
grill, ergonomically shaped carry handles and a pole socket for mounting with commercial spacer poles.
E1220
E1520
E1800X
B1220
B1520
B1800X
2-way full-range
2-way full-range
Subwoofer
2-way full-range
2-way full-range
Subwoofer
60 Hz - 20 kHz
55 Hz - 20 kHz
45 Hz - 300 Hz
55 Hz - 18 kHz
50 Hz - 18 kHz
40 Hz - 300 Hz
Power Rating1 (RMS)
200 W
200 W
400 W
400 W
400 W
800 W
Power Rating (Peak Program)
400 W
400 W
800 W
800 W
800 W
1600 W
93 dB (Full Space)
94 dB (Full Space)
99 dB (Half Space)
95 dB (Full Space)
96 dB (Full Space)
100 dB (Half Space)
90° x 40°
90° x 40°
–
100° (50°) x 50°
100° (50°) x 50°
–
Speaker Type
Frequency Response (-10dB)
Sound Pressure Level (1w @ 1m)
Dispersion
Crossover Frequency
Dimensions (W x H x D)
Weight (approx.)
3 kHz
2.8 kHz
–
15 ⁄8 x 22 ⁄5 x 16”
18 ⁄10 x 25 ⁄5 x 19”
44 lbs.
48.5 lbs.
5
4
3
1
2.5 kHz
1.8 kHz
–
21 ⁄2 x 25 ⁄5 x 21 ⁄5”
15 ⁄5 x 25 ⁄8 x 16”
18 ⁄10 x 27 ⁄5 x 19”
21 ⁄2 x 27 3⁄5 x 213⁄4”
66 lbs.
52.1 lbs.
59.5 lbs.
77.2 lbs.
1
1
4
3
1
3
3
(212) 444-6605 • 1-800-947-9905 • Quick Dial 92
1
PHOTO - VIDEO - PRO AUDIO
774
SPEAKERS
BEHRINGER
B300
Active 2-Way PA Loudspeaker System with 15” Woofer
A 300 watt, bi-amped sound reinforcement loudspeaker, in a rugged, low-resistance
plastic enclosure, that employs a 15” long-throw woofer with a high-power magnet and a
high-efficiency 1.25” titanium wave-guided compression driver. The amplification is split
between the woofer and horn 230 and 70 watts (peak) respectively. The B300 provides a
ULN spec XLR mic preamp input for connecting a dynamic microphone as well as a 1/4”
TRS line level input. An XLR line output is provided as a loop through for connecting to
additional B300s. Onboard circuitry features include high and low shelving EQ at 12kHz
and 80Hz, a built-in crossover, phase and time correction circuits and an opto-controlled
speaker protection limiter. Additional features include easy access handles as well as integrated suspension points and a pole socket for a range of mounting options.
CE1000P 300-Watt Business Environment
Speakers with Repaintable Front
The CE1000P are multi-purpose, 2-way loudspeakers designed for use in commercial
indoor installations such as restaurants, shops, museums, conference rooms and houses
of worship. They feature powerful 8” woofers and specially designed, high-resolution
waveguided tweeters that combine to deliver a linear frequency response along with the
ability to handle up to 300 watts (peak program), at 8 ohms. Their attractive black wood
enclosure features an interchangeable, dark silver front that is repaintable to match your
installation’s interior. Plus, the included wall-mount brackets ensure that secure mounting
of the speakers is a hassle-free.
MONITOR 1C
Ultra-Compact Monitor Speakers
The MONITOR 1C is a super-affordable, compact 2-way loudspeaker system,
designed for audio/video multimedia applications, home recording studios and
surround-sound systems. It has a powerful 5.5” woofer, and a high-resolution
.5” tweeter with a phase-optimized high-precision crossover that delivers an
impressive power handling capability of up to 100 watts (full range).
◆ Multi-purpose 2-way studio monitors ideally
suited for fixed installation, multimedia,
home recording studio, audio/video
production and surround-sound systems.
◆ Ultra-linear frequency range from 60 Hz to
23 kHz.
PHOTO - VIDEO - PRO AUDIO
◆ High power handling capability (100w /
IEC268-5) produces full-range output with
extremely low distortion.
◆ Powerful 51⁄2” woofer with extremely light-
weight cellulose cone and high-resolution
1/2” tweeter.
www.bhphotovideo.com
◆ Auto overload protection prevents tweeter
damage and resets automatically
◆ Phase-optimized and high-precision
crossover for absolute phase linearity
◆ Solid protective grille and rugged
construction for long life and durability.
SPEAKERS
E AW
775
CIS SERIES
Ceiling Mount Speakers
EAW offers a wide variety of flush-mount, ceiling mount speakers, with multi-tap
70V/100V transformers, designed to meet the increasing demands for quality install
sound systems. The use of polypropylene cone woofers offer greater stability and
longevity than paper-coned woofers.
CIS50
The economical CIS6, CIS50, CIS65, and CIS80 each use a coaxial speaker design
and include an integrated 70v/100v transformer. These models are ideally suited
for paging and light and background music systems. They are voiced to offer clarity
of speechmaking them well suited for waiting rooms, hallways, restrooms and for
emergency messages. The CIS80, CIS65, and CIS50 include a backcan firedome,
while the CIS6 is a simple, low profile solution. Each speaker features spring loaded
hardware for quick and easy installation.
CIS400
For those that require superior audio quality, the CIS300 and CIS400 2-way, bass
reflex “ceiling monitors” go beyond mere background music and paging systems.
They borrow design concepts originally developed for studio monitors including, waveguide-loaded high frequency transducers
that deliver greater dispersion patterns over standard designs. Both units can operate using the integral 70v/100v transformer
or via low impedance amplification. The CIS300 and CIS400 are ideal for installations where the higher fidelity is needed such
as presentations or any applications requiring quality music playback. Two input terminals and two loop-thru output terminals
are provided via removable locking connector with screw-down terminals.
CIS6
Enclosure
Low-Frequency (Woofer)
CIS50
2-way coaxial
2-way coaxial
6.5˝ twin cone driver
5.25˝ twin cone driver
CIS65
CIS80
6.5” polypropylene
8” polypropylene
CIS300
CIS400
2-way, front loaded
2-way, front loaded
4” polypropylene
6.5˝ polypropylene
1” cloth
Neodymium dome
1” damped cloth
90Hz - 22kHz
70Hz – 22kHz
—
—
2” mylar dome
2.5” mylar dome
Neodymium dome
Frequency Response (–10dB)
100Hz - 20kHz
100Hz - 20kHz
70Hz - 20kHz
50Hz - 20kHz
Frequency Response (Low-Z)
N/A
N/A
N/A
N/A
Horizontal Coverage (–6dB, 1kHz to 6kHz)
120°
130°
120°
120°
140° averaged
110° averaged
Vertical Coverage (–6dB, 1kHz to 6kHz)
90°
50°
45°
40°
124° averaged
110° averaged
100dB
92dB @ 1m
89dB @ 1m
89dB @ 1m
102dB @ 1m
107dB @ 1m
6W
6W
10W
20W
30W
40W
Transformer Taps 70v (Watts)
0.38 / 0.75 / 1.5 / 3
0.375 / 0.75 / 1.5 / 3
0.625 / 1.25 / 2.5 / 5
1.25 / 2.5 / 5 /10 / 20
3.7, 7.5, 15, 30
5, 10, 20, 40
Transformer Taps 100v (Watts)
0.75 / 1.5 / 3 / 6
0.75 / 1.5 / 3 / 6
1.25 / 2.5 / 5 / 10
2.5 / 5 / 10 / 20
7.5, 15, 30
10, 20, 40
N/A
Steel
Steel
Steel
Steel
Steel
High Impact
ABS
Perforated
metal
Perforated
metal
Perforated
metal
2.8” x 9.1”
7.09” x 4.86”
7.87” x 9.06”
5.0” x 10.6”
8.7” x 5.7”
9.1”
4.5”
5.6”
Cutout Size
7.87”
6.3”
7.8”
10.8”
Net Weight
2.1 lbs
2.87 lbs
6.2 lbs
7.9 lbs.
High-Frequency (Tweeter)
Crossover
Rated Maximum SPL
System Input Power Rating
Rear Enclosure Material (Fire Dome)
Grille
Dimensions (Diameter x Height)
2.0 kHz
Front of Ceiling Tile to Back of Can
3.75 lbs
5.7 lbs
89Hz - 20kHz (-3dB)
Perforated metal with
weather-resistant coating
(212) 444-6605 • 1-800-947-9905 • Quick Dial 92
11.8” x 6.6”
PHOTO - VIDEO - PRO AUDIO
SPEAKERS
776
E L E C T R O -V O I C E
SXA SERIES
Self-Powered Speaker Systems
If you need solid, clean powerful audio in the lightest package possible, direct your
ears to the SxA-Series. These self-powered, bi-amped speakers work well in a wide
range of sound reinforcement applications, from a simple vocal reinforcement PA to a
large, multi-box, high-SPL sound system.
These full-range systems set the highest performance standards for powered speakers.
The SxA100+ and SxA250 provide multiple inputs with full mix capability, a flexible EQ
section and plenty of power in compact, easy-to-move enclosures. The SxA360 offers
the highest power rating of the full range SxA series with an awesome 350 watts of
power for the woofer and 150 watts for the HF driver. The compact SbA750 powered
subwoofer adds hard-hitting bass to the SxA or other full-range systems.
SxA100+/SxA250 Powered Speakers
Full range loudspeakers ideal for most applications requiring high-quality
sound. Their design provides multiple inputs with mix capability, an easy to
use EQ section, and plenty of power in very compact, attractive packages.
◆ Linear response is easily optimized for speech or music with the on
board multiband equalization.
◆ Built-in pole mount and optional hardware makes it easy to
position them without expensive accessories.
◆ Designed to provide high SPL without excessive heat, the high-quality
mic preamp provides great sounding vocals or speech. A master level
control sets the desired SPL, and the line input can be mixed and
balanced with a mic with its level control.
◆ High frequency section utilizes a molded-in constant-directivity
horn coupled to a DH2010A. The result is vocals that sound natural
yet “cut through” in reverberant, noisy rooms.
SxA360 Powered Speaker
SbA760 15” Powered Subwoofer
A full range powered speaker that is ideal for applications
requiring easy setup without compromising, powerful,
high-quality sound. It offers a unique combination of
high SPL, natural frequency response, and dynamic
headroom that delivers feedback-free sound without
the need for equalization.
The SbA760 is a high-power compact sub designed to
match the SxA100+, SxA250 and SxA360. The state-ofthe-art class H power amplifier module delivers 760
Watts RMS power to an EV DL15Y 15” woofer.
◆ 350W LF amplifier, 150W HF amplifier.
◆ Includes an integrated pole mount, 4 casters, and a
◆ Compact and ergonomic design for easy transport.
◆ Dynamic limiter and full protection.
◆ Built-in suspension points and pole mount.
Frequency Response (-10 dB)
Rated Output Power long term
Max. Sound Pressure Level
PowerCon Lead.
SxA100+
SxA250
SxA360
SbA760
50Hz - 20kHz
55Hz - 20kHz
60Hz - 18kHz
42 - 150Hz
LF 150 W / HF 50 W
LF 150 W / HF 50 W
LF 350 W / HF 150 W
760 W
128 dB
124 dB
126 dB
126 dB
65° x 65°
80° x 55°
65° x 65°
—
LF Components
12” woofer
15” woofer
12” woofer
15” woofer
HF Components
DH2010A
DH2010A
1” DH2T Compression Driver
XLR Mic
XLR Mic
XLR / 1/4” Line Level
XLR / 1/4” Line Level
XLR / 1/4” Line Level
2x XLR slave through
XLR out (slave)
XLR out (slave)
XLR out
2x XLR Mid/Hi out
HF Coverage (nom.)
Inputs
Level Controls
Mic Level (-35 dBu to 0 dBu); Master Level (- ∞ to 0dB)
2-Band EQ
Dimensions (HWD); Weight
PHOTO - VIDEO - PRO AUDIO
—
2x XLR/jack combo
Master Level (- ∞ to +10dB)
LF: ± 6 dB; HF: ± 4 dB
LF: ± 6 dB; HF: ± 4 dB
—
—
23.1 x 16.9 x 12.3˝; 43 lbs.
24.6 x 17.9 x 13.1”; 49 lbs.
23.1 x 16.9 x 12.3”; 36 lbs.
23.7 x 16.9 x 26.2”; 94.7 lbs.
www.bhphotovideo.com
SPEAKERS
E L E C T R O -V O I C E
777
ZX1 / ZX1i
Compact Sound Reinforcement Speakers
The ZX1 and ZX1i (install) are a series of compact sound reinforcement speakers
designed for a wide variety of fixed and portable use applications including fixed
installations for 70v - 100v systems. The entire ZX1(i) line features 8”, high output,
low frequency transducers and 1” compression drivers that are capable of 200 watts
continuous, 800 watts peak power handling, with a wide, smooth frequency
response and up to 123dB of max SPL. A velocity compensated bass port delivers
exceptional low frequency response without the introduction of unwanted
mechanical noise or distortion. For added flexibility, the HF horns are rotatable,
accommodating vertical and horizontal speaker orientation.
The ZX1i install models are suited for both
indoor and outdoor use and feature an
integrated, heavy duty mounting bracket,
called QuickSAM, that offers hassle-free, foolproof installation. The ZX1 features an
integral handle pocket and a built-in pole mount for use with readily available
speaker stands. The ZX1(i) are housed in a high-tech enclosure that has been
engineered to provide maximum rigidity and acoustic performance. The long term
reliability of the ZX1(i) is assured thanks to the full-bandwidth overload protection.
ZX1-90
ZX1i-90
ZX1i-100
ZX1i-100t
Portable Version
Fixed Install Version
Fixed Install Version
70v/100v Version
Frequency Response (-3dB)
60Hz - 20kHz
60Hz - 20kHz
60Hz - 20kHz
60Hz - 20kHz
Frequency Range (1) (-10dB)
48Hz - 20kHz
48Hz - 20kHz
48Hz - 20kHz
48Hz - 20kHz
Axial Sensitivity (1)
94dB (1W/1m)
94dB (1W/1m)
92dB (1W/1m92
92dB (1W/1m)
123dB
123dB
121dB
121dB
90° or 50°
90° or 50°
100°
100°
Maximum Calculated SPL
Horizontal Coverage
Vertical Coverage
System Power Handling
LF Transducer
50° or 90°
50° or 90°
100°
100°
200W Continuous,
400W Program
200W Continuous,
400W Program
200W Continuous,
400W Program
200W Continuous,
400W Program
EV8L, 8” Driver
EV8L, 8” Driver
EV8L, 8” Driver
EV8L, 8” Driver
HF Transducer
Connectors
Overload Protection
DH2005, 1” Exit Compression Driver
4-Pin detachable Phoenix style
4-Pin detachable Phoenix style
Full protection
Full protection
Full protection
Full protection
N/A
6.5, 12.5, 25, 50,
100 watts 70/100v
Transformer Taps
N/A
Mounting System
Four M8 studs on bottom of speaker
Built-In Monitor Angle
Available Colors
Included Accessories
Dimensions (H x W x D)
Weight
DH2005, 1” Exit Compression Driver
Two NL4 Connectors
N/A
4-Pin detachable Phoenix style
QuickSAM Heavy-Duty Strong-Arm Mounting Bracket
Yes
No
No
No
Black
Black/White
Black/White
Black/White
None
QuickSAM Mount
QuickSAM Mount
QuickSAM Mount
17.75 x 11.12 x 10.35”
17.75 x 11.12 x 10.35”
17.75 x 11.12 x 10.35”
17.75” x 11.12” x 10.35”
18.5 lbs.
18.5 lbs.
18.5 lbs.
12 lbs.
(212) 444-6605 • 1-800-947-9905 • Quick Dial 92
PHOTO - VIDEO - PRO AUDIO
778
SPEAKERS
F BT
FBTMAXX
Powered Speaker Systems
The new generation of FBTMaxX speakers is made of
polypropylene with gas injection molding, producing an
ultra-light FBT product that is extremely sturdy. The special
design, coupled curves and rounded edges, permits
multi-functional application in all audio-professional
application systems: such as stage monitors, for wall or ceiling
installation and with special adapters to stack the enclosures.
Special attention has been paid to the accessibility of controls
in all conditions of use. FBTMaxX is the perfect marriage of
power, mechanics and leading-edge technology.
FBTMaxX 2A
◆ Extremely light and sturdy enclosure made
FBTMaxX 4A
◆ Incorporates ADAP (Advanced Dynamic
Active Protection) Processor for total
protection of the LF & HF drivers and a
24dB/oct active crossover filter.
of polypropylene with gas injection molding
◆ 200w RMS 10” low frequency woofer with a
Neodymium magnet and die-cast aluminum
frame, and a 50-watt RMS 1” high frequency
compression driver with Titanium
diaphragm coupled to a custom-designed
constant directivity 90° x 60° horn.
◆ Frequency response is 50Hz to 20kHz and it
will handle 250 watts @ 8 ohms.
◆ The built-in ergonomically designed carry
handle allows for a “balanced” feel when
transporting.
◆ The control panel designed for accessibility
under all operating conditions, features both
Neutrik XLR and 1/4” inputs, mic/line switch
and ground lift switch. Volume control,
variable gain control, 3-band EQ, and LED
clipping indicators are also provided.
stacking and two M-10 flying points for wall
or ceiling mounting, either vertically or horizontally, as well as a standard 13⁄8” speaker
socket for speaker stand mounting.
ACTIVE VERSION
FBTMaxX 4A
FBTMaxX 6A
FBTMaxX 9Sa
LF Driver
10”
12”
15”
15”
HF Driver
1”
1”
1.4”
—
Built-in LF/HF Amplifier
200W / 50W
300W / 100W
700W / 200W
900W / —
Frequency Response
50Hz - 20kHz
50Hz - 20kHz
40Hz - 20kHz
40Hz - 125kHz
Input Impedance
Max. SPL
◆ 300w RMS12” LF woofer with a Neodymium
magnet, die-cast aluminum frame, and a
100w RMS 1” HF compression driver with
Titanium diaphragm coupled to a custom
constant directivity 90° x 60° horn.
◆ Frequency response is 50Hz to 20kHz and it
will handle 400 watts @ 8 ohms.
◆ Four M-10 flying points
◆ Built-in stacking adapters enable cabinet
FBTMaxX 2A
Sensitivity@1W/1m dB
Same as FBTMaxX 2A except:
97
98
98
97
22kΩ
22kΩ
22kΩ
22kΩ
121dB
123dB
128dB
126.5dB
Dimensions
13.9 x 21.7 x 12.1”
16 x 25 x13”
19 x 29.9 x 15.7”
19.5 x 25.5 x 19.1”
Net Weight
28.6 lb.
35.3 lb.
72.8 lb.
64 lb
PASSIVE VERSION
FBTMaxX 6A
Same as FBTMaxX 4A except:
◆ 700w 15” LF woofer with a Neodymium
magnet and die-cast aluminum frame, and
a 200w RMS Class G high frequency
compression driver with Titanium
diaphragm coupled to a custom-designed
constant directivity 90° x 60° horn.
FBTMaxX 9SA
◆ 900 watt RMS 15” dual coil low-frequency
woofer with a Neodymium magnet and
die-cast aluminum frame.
◆ Frequency response is 40Hz to 125Hz and it
will handle 400 watts @ 8 ohms.
◆ Two M-10 flying points for wall or ceiling
mounting, either vertically or horizontally,
as well as a standard 13⁄8” speaker socket for
speaker stand mounting.
FBTMaxX 2
FBTMaxX 4
FBTMaxX 6
FBTMaxX 9S
◆ Control panel features left and right channel
Power Handling
250W
300W
700W
900W
Impedance
4 or 8Ω
4 or 8Ω
4 or 8Ω
4Ω
Net Weight
22 lb.
28.6 lb.
64 lb.
57.3 lb.
inputs with a built-in crossover, both input
channels with XLR/Neutrik input, XLR
Neutrik link connectors, XLR high pass
filtered output and volume control.
PHOTO - VIDEO - PRO AUDIO
www.bhphotovideo.com
SPEAKERS
779
F BT
JOLLY
Live Sound Reinforcement Speakers
FBT’s JOLLY active series encompasses a complete range of 2-way, bi-amplified
sound reinforcement monitors and subwoofers. Each 2-way, full-range monitor
features polypropylene molded enclosures, and are available with woofer diameters of 5-, 8- and 12”. The subwoofers utilize a vented band-pass design and are
available with 10- and 12” woofers and feature birch plywood
enclosures with a scratch-resistant finish.
Models 5BA, 8BA and 12BA feature mic/line switchable XLR / 1/4” combo input
with volume control and two band (high and low) EQ, XLR male output, ground
lift switch and ADAP (Advanced Dynamic Active Protection) limiter. Models 5RA,
8RA and 12RA offer XLR / 1/4” combo input with volume control, XLR male output, ground lift switch and ADAP (Advanced Dynamic Active Protection) limiter.
Also available are the Sub 10a - 10” woofer, and the Sub 12a - 12” woofer, which
are are housed in birch plywood enclosures and feature left and right XLR / 1/4”
combo inputs, XLR Link, XLR filtered output for satellites, volume control,
ground lift switch, and 0° - 180° phase reversal switching, as well as ADAP (Advanced Dynamic Active Protection) limiter.
Jolly 5 - Accessories
MS30BK Adapter (FBAJ5BK): Jolly 5 to
microphone stand ................................................8.95
Steel Flange, Recessed (FSSJ5CW): For wall or
ceiling mounting. White finish ......................19.95
Nylon Carrying Case (FBV36)........................39.95
Adjustable Floor Stand (FBMS30BK)............CALL
Directional Wall Mount: Available in Black
(FBSJ5BK) and White (FBSJ5W) .............................39.95
Horizontal Wall Mount: Available in Black
(FBSJ5UBK) and White (FBSJ5UW) ........................23.95
Adjustable T-shaped Support (FSSJ5T): For 2
speaker cabinet....................................................CALL
Jolly 8 - Accessories
Jolly 12 - Accessories
35mm ø to 25mm ø Adapter (FBAJ8BK) ...................................................19.95
Horizontal Wall Mount (FBBOX112) .............................................................64.95
Directional Wall Mount (FBSJ8BK) ...............................................................58.95
Nylon Carrying Case (FBV38).........................................................................59.95
Horizontal Wall Mount (FBSJ8UBK) ..............................................................33.95
Metal Floor Stand (FBBOX30BK) .......................................................................CALL
Nylon Carrying Case (FBV37) .........................................................................49.95
Metal Floor Stand (FBBOX40BK) .......................................................................CALL
Metal Floor Stand (FBBOX20BK) ......................................................................59.95
Adjustable Subwoofer to Satellite Speaker Mounting Pole
(FBBOX50): With safety locking device .............................................................CALL
Adjustable T-shaped Support (FSSJ8T): For 2 speaker cabinet........CALL
Internal Amplifier W rms
Frequency Response @-6dB
Jolly 12B A
Jolly 12R A
Jolly 8B A
Jolly 8R A
Jolly 5RA
Jolly 5RA
250+50
150+50
150+50
80+20
60+20
60
Jolly SUB 12A Jolly SUB 10A
300
300
50Hz - 20kHz
60Hz - 20kHz
60Hz - 20kHz
70Hz - 20kHz
80Hz - 20kHz
90Hz - 20kHz
40Hz - 120Hz
45Hz - 120Hz
Low Frequency Woofer
Voice Coil
1x 12.5”
2” coil
1x 12.5”
2”
1x 8”
1.5”
1x 8”
1.5”
1x 5”
1”
1x 5”
1”
1x 12”
2.5”
1x 10”
2”
High Frequency Driver
Voice Coil
1 x 1” + horn
1”
1 x 1” + horn
1”
1 x 1” + horn
1”
1x Tweeter+horn
0.8”
1x Tweeter
0.8”
1x Tweeter
0.8”
–
–
123
Maximum SPL dB
123
121
119
114
112
107
126
90° x 60°
90° x 60°
90° x 60°
90° x 60°
90° x 60°
90° x 60°
–
–
Crossover Frequency kHz
active 1.8kHz
active 2kHz
active 2kHz
active 2.5kHz
active 2.7kHz
passive 3.5kHz
active 120Hz
active 120Hz
Dimensions (WHD)
16 x 26 x 15”
16 x 26 x 15”
10 x 16.3 x 9.65”
10 x 16.3 x 9.65”
6.7 x 10.8 x 7”
6.7 x 10.8 x 7”
16 x 21.6 x 23”
14.5 x 19 x 20.5”
40.75 lbs.
35.25 lbs.
18 lbs.
12 lbs.
7.75 lbs.
6.6 lbs.
77 lbs.
61.75 lbs.
Dispersion HxV
Weight
(212) 444-6605 • 1-800-947-9905 • Quick Dial 92
PHOTO - VIDEO - PRO AUDIO
780
SPEAKERS
JBL
EON G2
Hassle-free with professional sound quality and performance,
JBL’s EON G2 series is designed for applications ranging from live
sound reinforcement, speech and vocals to music playback in
entertainment, A/V and institutional environments. Consisting of
the compact EON10 G2 (10” woofer) and full-range EON15 G2
(15” woofer) powered speakers with three input mini-mixer, and
the EONSUB G2 powered subwoofer, they are ideal for hotels,
meeting planners, AV companies and just about any application
where portable compact sound reinforcement is required.
They deliver 125 and 300 watts of power (respectively) to a
Neodymium Differential Drive low frequency driver. The driver
EON Sub G2
boasts a dual neodymium magnet and dual voice coil motor
that delivers high output and low distortion from a lightweight
woofer. Meanwhile, the high frequency amplifier delivers 50- and
EON10 G2
100 watts of power to a titanium diaphragm compression driver
with ferro-fluid cooling. JBL’s revolutionary “ThermoMaster Total
Thermal Management System” eliminates the need for any internal or external cooling fans. Instead, a single piece,
cast-aluminum baffle integrates the woofer frame, horn and amplifier heat-sink while air movement through the
finned ports dissipates heat. With their integrated three-input mixer, the speakers can directly accommodate electronic
keyboards, drum machines, electrified acoustic guitars, and microphones. An additional XLR output allows the speakers
to be daisy-chained together or send the mixed output to an external mixing console.
With 125 watts for low frequencies and 50
watts for the highs, the EON10 G2 can be
used in AV applications, smaller musical
and spoken word performances. Versatile
cabinet design allows use in several ways:
As a front of house speaker, sitting on a flat
hori surface or raised in the air using standard tripod speaker stands. Angled back
allows use as a vocal or instrument monitor
on stage. The EON10 G2 can also be snugly
placed atop the EONSUB G2 powered subwoofer for added volume and extended
bandwidth. Combined, they provide a full
range sound system for small and medium
sized events.
With 400 watts of power, excellent sound
quality, easy to transport and set up, the
EON15 G2 is at home as a main PA or on
stage as a monitor. Use by itself for casual
solo or duo work, or combine multiple
EONs into a complete, powerful PA system.
Electric guitarists using amp modeling
modules will find that the clean, full-range
sound of EON15 G2 reproduces all of the
subtle tones the modules can produce.
PHOTO - VIDEO - PRO AUDIO
EON10 G2
◆
Multi-angle enclosure for FOH or stage
monitor applications
◆
Selectable balanced mic/line input and
one dual-channel, 1/4” TRS line-level input
◆
60° x 90° constant directivity horn
◆
with neodymium magnet for light weight
and reduced distortion
Balanced loop/mix output. “Daisy-chain”
additional EON speakers or send the
mixed output to a mixing console
◆
1” JBL compression driver with titanium
diaphragm and ferro-fluid cooling
Rugged, lightweight, black co-polymer
enclosure
◆ Integral 35mm pole mount receptacle
◆ 10” Differential Drive low frequency driver
◆
◆
125 watt low-frequency and 50 watt
high-frequency (bi-amplified) amplifiers –
actual power delivered to the drivers
with securing thumb screw
◆
Attachment points for fixed-angle and
adjustable mounting brackets
EON15 G2 Step-up Features
◆
15” Differential Drive low-frequency
driver with dual neodymium magnet for
light weight and reduced distortion
◆
One balanced mic/line input, two 1/4”
phone line-level inputs.
◆
Two-band equalization.
◆
1” (throat diameter) JBL compression
driver with 1.75” titanium diaphragm and
ferro-fluid cooling
◆
Extended low-frequency performance —
delivers powerful bass down to 39Hz.
◆
◆
300 watts low-frequency and 100 watts
high-frequency (bi-amplified) - actual
power delivered to the drivers.
Tailored dynamic processing protects
amplifiers and speakers from being overdriven without producing extreme changes
in frequency response as level varies.
www.bhphotovideo.com
SPEAKERS
JBL
781
EON G2
EONSUB G2
The EONSUB G2 offers powerful low
frequencies in a compact, durable enclosure,
making it a perfect companion for either
the EON10 G2 or EON15 G2 powered
speaker, or any sound system that needs
additional low end.
When you combine the EONSUB G2 with the
EON10 G2 or EON15 G2, you have a full range
sound system whose clarity, volume and low
end are truly amazing, considering their
small size. Because the power amp and
crossover are internal to all EON speakers,
set-up time and outboard equipment are
minimized. Just plug in and play.
◆ 250 watts of low-end power and a
frequency range of 40 to 200Hz.
◆ Patented Neodymium Differential Drive
woofer generates maximum efficiency
with minimum weight.
◆ Thermomaster cooling system allows the
amplifier and 15” woofer to stay cool, even
under the most challenging circumstances,
without the need for noisy fans or
protruding external heatsinks
◆
Specifically designed to securely hold the
EON10 G2 using receptacles built into the
top of the EONSUB G2
E-Systems
JBL offers the EON10 and
EON15 G2 in complete
full- function sound
systems that include
two speakers, a mixer,
two JBL dynamic M50S
microphones and four 25’
XLR cables for connecting
the mixer to the microphones
and speakers. Ideal for
speeches, schools, churches
or any application that requires
quality sound in a smaller venue, the 14-input, 350 watt EON10 G2 sound system
includes the Soundcraft E6 mixer and a pair of EON10 G2 speakers. When
combined with the EONSUB G2 subwoofer, the power of the system is more than
doubled. Featuring twice the power and greatly enhanced sound, the 16-input,
800 watt EON15 G2 System sound system includes the Soundcraft E8 mixer and
two EON15 G2 speakers.
THE ORIGINAL EON SERIES
EON was the first professional sound system made to be
truly portable. The secret behind EON’s feather-weight is
a rare earth material called neodymium with 10 times the
magnetic strength of ceramic magnets, enabling a few
ounces of neodymium to replace nearly
20 lbs. of conventional magnetic
materials. For flexibility, the EON
speakers are built to work as both
upright speakers and wedge monitors.
With ergonomic handles and light weight,
they are remarkably easy to carry. Simple to
set up. And a pleasure to use.
◆ Scratch-forgiving black covering and
embossed grill cover for added rigidity
EON G2 Accessories
Suspension Kit for EON15 (JBESK15) ......35.95
Suspension Kit for EON10 (JBESK10) ......27.95
Fixed Angle Mounting Bracket (JBEONBRK1)
For EON 15” models........................................44.95
Fixed Angle Mounting Bracket (JBEONBRK2)
For EON 10” models........................................34.95
Black Anodized Aluminum
Tripod Speaker Stand (JBSS2BK) ...........142.50
Zippered, Plush-Lined Cordura Bag
(JBEON10B): For EON 10 G2 .............................44.95
Zippered, Plush-Lined Cordura Bag
(JBEON15B): For EON 15 G2..............................53.95
Zippered, Plush-Lined Cordura Bag with
Wheels (JBEON15BW): For EON 15 G2......104.95
EON 15P-1
EON 1500
The EON 15P-1 is a two-way powered
speaker system which incorporates a
discrete 130 watt power amplifier for low
frequencies and a 50w power amplifier for
the high-frequency driver in a light weight
rugged enclosure. Designed for multipurpose usage, the EON 15P-1 may be driven
from a mixer or a single microphone.
The EON 1500 is designed for use with a powered
mixer or external amplifier. Features proven JBL
components like a liquid-cooled compression driver
and SonicGuard protection. It’s unique design
allows you to use them as a main speaker, tripod
mounted or a dual-angle floor monitor. Accepts a
1/4” phone jack or Speak-On input connection
wired in parallel for ease of hookups.
(212) 444-6605 • 1-800-947-9905 • Quick Dial 92
PHOTO - VIDEO - PRO AUDIO
782
SPEAKERS
JBL
MPRO 200 SERIES
The MPro Series speakers are designed for music pros looking
for professional performance and appearance in live sound
reinforcement speakers. The MPro line has two segments, the
200 Series with carpet-covered enclosures and the 400 Series
with higher power handling, DuraFlex coated enclosures and
a Crown-powered Subwoofer.
The MPro 200 Series features premium-grade carpet covered
18mm plywood enclosures. The edges of the carpet are
captured by the joint detail to prevent visible seams or
peeling. The large-mouth horn design of the MP212, MP215
and MP225 delivers smooth, natural reproduction –
especially in the critical mid-range. A 16-gauge, steel grille
protects the woofers.
The MP400 Series features JBL’s DuraFlex-coated enclosures and a a Crown-powered subwoofer. The MP412 and MP415
feature the ARD (Annular Ring Diaphragm) compression driver to deliver extraordinary high-frequency extension.
F E AT U R E S
They All Feature
◆ 70° x 70° horn designed for even coverage
and smooth response on and off axis.
◆ Ferro-fluid cooled compression driver with
titanium diaphragm.
◆ SonicGuard protects high-frequency driver
from excess power without interrupting the
performance.
◆ Low frequency drivers with 21⁄2” (64 mm)
edgewound voice coil.
◆ Rectangular (MP212/225) and trapezoidal
(MP215) enclosures constructed of 18mm
plywood using tongue-and-groove joint
detail for durability and years of service.
◆ Molded baffle is constructed of SMC (sheet
molding compound), a durable, cross-linked
thermo-plastic also used in automotive
body panels.
◆ Laminar Flow Baffle reduces distortion and
diffraction effects by providing smooth,
rounded baffle contours.
◆ Precision engineered crossover for optimal
power response and performance in the
critical mid-range region.
◆ Covered in dark gray, premium grade, 12 oz.
carpet - the most durable and attractive
carpet covering available.
MP212
12” Two-Way Speaker
Compact, portable, 12” two-way speaker in a
multi-angle enclosure that’s equally at home
as a FOH (front-of-house) speaker or as a
stage monitor. Designed for portable
applications in live performance, music
playback and speech reinforcement, the
MP212 delivers excellent performance by itself
or as a satellite over the MP255S subwoofer.
◆ An attractive 16-gauge, hexagon perforated,
steel grill protects speaker components
from damage.
◆ Input panel includes a Neutrik Speakon
NL-4 input and a 1/4” phone jack for flexible
connectivity.
◆ 35mm pole mount receptacle (all except the
MP215
15” Two-Way Speaker
The MP215 is a portable, 15”, two-way
speaker designed for live performance, music
playback, and speech reinforcement.
MP225).
MP225
The MPro line offers a unique, professional appearance, superb acoustical performance and
cutting-edge configurations. MPro includes the first mid-priced subwoofers to offer VGC
(Vented Gap Cooling) technology and the first speaker systems offering JBL’s Laminar Flow
Baffle technology. The JBL Laminar Flow Baffle incorporates smooth, contoured surfaces
that greatly reduce distortion caused by turbulence and diffraction. Constructed of Sheet
Molding Compound (a super tough, cross-linked, polymer also used for automotive body
panels), this one-piece baffle integrates horn, ports and woofer-mounting into a single part.
This permits features to be tightly spaced, allowing a large horn-mouth (for improved
mid-range and directivity performance) without making the cabinet too large.
PHOTO - VIDEO - PRO AUDIO
www.bhphotovideo.com
Dual 15” Two-Way Speaker
The MP225 is a portable, dual 15”, two-way
speaker system designed for live performance,
music playback, and speech reinforcement.
The crossover network employs separate
low-pass filters for each woofer. The lower
woofer is rolled off at a lower frequency than
is the upper woofer. This reduces mid-range
phase anomalies while retaining the strong
low-frequency output that is the primary
appeal of a dual woofer system.
SPEAKERS
JBL
783
MPRO 200 SERIES
MP255S
MP410 Series
Dual 15” Subwoofer
The MPro 400 Series steps up with enclosures coated
with JBL’s exclusive DuraFlex - a rugged, advanced,
poly-urea finish. They also feature dual Neutrik
Speakon NL-4 input connectors. Designed for
portable applications in live performance,
music playback, and reinforcement of speech,
the MP410, MP412 and MP415 deliver excellent
performance by themselves or as satellites
over the MP418S and MP418SP subwoofers.
The MPro MP255S is a
dual 15” subwoofer
designed to
supplement
and extend the
low-frequency
output of
full-range
systems in a
variety of
portable and
fixed applications.
Bandpass design
(uses two tuned
chambers to shift its energy
down into the low-frequency region)
combined with an internal Low Pass Filter
(to get rid of the remaining mid-range
output) assures solid performance in
bi-amplified or single amplified systems.
While configured for vertical orientation, the
speaker may also be used in a horizontal
position when a larger footprint and lower
vertical height are preferred.
◆ Dual 15” band-pass design puts the energy
in the bass region where it’s needed for
“punch” and power.
◆ Low-pass filter blocks mid-range output
MP412/MP415 12” and 15” Two-Way Speakers
The MP412 and MP415 are portable 12” and 15” two-way speaker systems in a
multi-angle enclosure that supports main PA or stage monitor applications. Their
high-frequency performance makes them outstanding choices for high-level music
playback, especially when combined with subwoofers.
Harmonic Geometry) technology reduces harmonic distortion and improves power
response.
◆ With a design that combines very high motor strength with low moving mass, their
unique, ARD (Annular Ring Diaphragm) compression driver delivers smooth, extended
high-frequency output to 20kHz.
◆ High power handling - 350 watts (average) and 1,400 watts (peak) power capacity.
MP418S/MP418SP 18” Subwoofer Systems
◆ Dual Neutrik Speakon NL-4 input
connectors provided for secure connection
and loop-through capability.
◆ Input connections may be reconfigured for
pin 1± or pin 2± for compatibility with any
cabling scheme.
◆ Heavy duty casters mounted on the rear of
◆ 35mm pole mount receptacle. 24” steel
The MP410 is a compact, portable, 10”, two-way speaker system
using JBL components in a professional quality enclosure that
looks and sounds like the high-end, specialty speaker systems that
top audio pros rely on. It incorporates a 10”, woofer with 2”, edgewound voice-coil. Surround design is optimized for maximum
excursion and low distortion using FEA (finite element analysis)
modeling. The compression driver with pure titanium diaphragm
and ferro-fluid cooling provides improved smoothness and thermal
power handling.
◆ JBL 2023 12” and 2033 15” woofer with 3”, edge-wound voice-coil. SHG (Selective
from the subwoofer. Combined with the
band-pass design, this assures that the
MP255S will combine with the mid / high
speaker for excellent low-frequency
performance - even without a separate
subwoofer amplifier. Even greater
performance and control is possible in
bi-amplified configurations.
the enclosure for easy transport.
MP410 10” Two-Way Speaker
The MPro MP418S (passive) and MP418SP (powered)
compact subwoofers, each with a single 18” speaker, are
housed in bass reflex enclosures. Both subs utilize a VGC
(Vented Gap Cooling) 18” low frequency transducer which
is designed to handle up to 600 watts (RMS). The MP418SP
is powered by a Crown dual channel amplifier with 660
watts RMS per channel into 4 ohms or 400 watts RMS into
8 ohms. One amp powers the internal sub, while the other
can be used to power a satellite or MP418S. The MP418S
offers a pair of Neutrik Speakon NL-4 connectors for inputs.
pole included
(212) 444-6605 • 1-800-947-9905 • Quick Dial 92
PHOTO - VIDEO - PRO AUDIO
784
SPEAKERS
M AC K I E
C200 / C300Z
Passive 10” and 12” 2-Way Speakers
The C200 and C300z with 10” and 12” LF transducer, respectively, are the portable,
passive cousins to the popular SRM350 and SRM450 active monitors. Both units
are housed in impact-resistant enclosures with sturdy handles, pole-mount, and
integrated rigging points, and offer Speakon and 1/4” connectors for connecting
to a powered amp or mixer. They are ideal for use in a portable or fixed sound
system and work seamlessly with Mackie’s PPM Series powered mixers.
The C200’s 10” LF transducer is complemented by a 1.4” HF titanium compression
driver and a low-impedance compensated crossover and transducer protection
system that combine to deliver 500W peak power handling at 8 ohms. The
C300z’s 12” LF transducer is accompanied by a 1.75” HF compression driver that
delivers 750W of peak power handling.
SRM350 & SRM450
Active Sound Reinforcement Monitors
The SRM350 and SRM450 are portable, two-way bi-amplified, active sound
reinforcement speakers designed for small to medium mobile and fixed
installations. Both units provide a balanced XLR input that is conveniently
switchable for mic and line operation, potentially eliminating the need for
an external mixer. Both units are built into rugged, lightweight, high-impact
polypropylene enclosures with recessed ‘D’ handles, M5 rigging points and
pole mounts.
The SRM350 features discrete165w and 30w amplifiers for the10” LF transducer
and 1.4” high-output precision titanium compression driver, respectively. The
SRM450 features 300w and 100w amplifiers for the 12” LF transducer and 1.75”
high-output precision titanium compression driver, respectively.
C200
C300Z
SRM350
SRM450
Speaker Type
2-way passive
2-way passive
2-way active
2-way active
Frequency Response (–3 dB):
89Hz – 20kHz
55Hz – 18kHz
83Hz - 18.5kHz
55Hz - 18kHz
Frequency Range (–10 dB):
59Hz – 22kHz
45Hz – 20kHz
61Hz - 22kHz
45Hz - 20KHz
Maximum SPL Long-term @ 1m:
118dB
123dB
118dB
127dB
Crossover Frequency:
1.8 kHz
1.8 kHz
2.4 kHz
1.6 kHz
Power Handling (RMS/Peak) (8Ω):
200 watts / 500 watts
300 watts / 750 watts
LF Amplifier (continuous)
N/A
N/A
165 Watts
300 Watts
HF Amplifier (continuous)
N/A
N/A
30 Watts
100 Watts
90° x 80°
90° x 45°
90° x 80°
90° x 45°
20.75 x 13.1 x 12.25”
26 x 15.4 x 14.8”
20.75 x 13.1 x 12.25”
26 x 15.4 x 14.8”
26 lbs.
43 lbs.
32 lbs.
51 lbs.
Dispersion
Dimensions H x W x D
Weight
PHOTO - VIDEO - PRO AUDIO
www.bhphotovideo.com
SPEAKERS
M AC K I E
785
400 SERIES
Precision Passive Loudspeakers
Comprised of the S408 full-range loudspeaker and the S410 subwoofer,
Mackie’s Precision Passive loudspeakers utilize Tetrad, a proprietary
technology developed by both Mackie and EAW, that employs four drivers,
instead of one, to deliver superior definition with a much greater coverage
area than conventional loudspeaker designs.
The portable S408 can handle 600W of power RMS at 8 Ohms, and features
four 8” LF transducers and a 1” HF driver feeding a large high frequency horn
with a 75 by 40° dispersion. It has a frequency response of 60Hz - 22kHz.
Locking NL4 (Speakon) connectors are provided on the rear panel, for input
and parallel thru connections. The S408 offers four top and side mounted
handles, for easy transport, and is horizontally and vertically flyable via 12
integrated 3/8” threaded inserts. The S408 can also be pole mounted using
commercially available speaker stands, and is easily stackable atop the
410. Additionally, the symmetrical trapezoidal design allows the S408 to
be used for monitor wedge applications.
The S410 subwoofer can handle 750W of power RMS at 8 Ohms, and features four 10” woofers designed to deliver
improved transient response vs using a single 18” sub.The S410 has a frequency response of 40Hz - 400Hz and features an
integrated, high quality180Hz low pass filter that eliminates the need for an external crossover, when used with the
S408 loudspeaker. The S410 has recessed foothold for stacking an S408 or additional S410. It also offers a pole mount
receptacle on the top and can be transported using its two side-mounted carry handles. Two Speakon connectors are
provided for inputs and pass through.
SWA-1501 15” High Output, Active Subwoofer System
Ideally suited for small to medium sized touring and mobile DJ applications as well
as fixed installations in churches, corporate facilities, and nightclubs, the SWA-1501
features high-quality 15” RCF Precision transducers with high-temperature
inside/outside coil combined with a 500-watt continuous/700 watt peak (SWA-1501)
application-specific amplifier. Together, these robust components allow them to
deliver an impressive 128dB of peak output. The SWA-1501’s cabinet is constructed
with 18mm thick, 13-ply Baltic-Birch plywood finished in back splatter paint and
equipped with cast aluminum side handles for efficient loading and transport as well
as a female pole mount fixture.
Input output options allow them to be easily configured for most any application.
Stereo and mono inputs are provided through XLR style connectors while a high-pass
output allows for connection to active full-range speakers or amplifiers powering
passive full range speakers. Four function LEDs provide power on, limit, signal present,
and thermal condition indication. A rotary level control allows adjustment from -15dB to +5dB.
(212) 444-6605 • 1-800-947-9905 • Quick Dial 92
PHOTO - VIDEO - PRO AUDIO
786
SPEAKERS
SAMSON
EXPEDITION EXPRESS SERIES
All-In-One
Portable PA System
Expedition Express is the total solution to professional
sound, made portable. It gives you everything you need
to make a professional presentation anywhere you can
roll it. Expedition Express is a great solution for performers
on the move. Bands, mobile DJ’s, schools, houses of
worship, corporate A/V and institutional applicationsanywhere portable, high quality sounds required.
Unlike most portable PA systems, the Expedition Express
is designed to sound great. Not just for public speaking
either—but for live and recorded music, too.
The system is comprised of a pair of rugged, acoustically
balanced two-way loudspeakers, a 4-channel mixer with
DSP, a powerful 250-watt amplifier and all the accessories you need. What’s more, the system interlocks, and packs up
into a single rolling unit so it’s easy to transport.
The Expedition Express combines a powered speaker with built-in amplification and controls, and a light-weight
second speaker or “slave”. When set up for performance, the two cabinets are connected by a single cable. When they are
packed of for the road, the lightweight passive speaker cabinet locks into the top of the amplified speaker cabinet with a
unique auto-locate mechanism. Each loudspeaker is housed in a lightweight, yet heavy-duty, molded resin
cabinet with extensive internal bracing to give it rigidity, low resonance and the maximum possible volume.
Pro Quality Electronics
The Expedition Express’s integrated 250-watt amplifier is perfectly matched to
the drivers for surprisingly high efficiency. The sound is clear and hard-hitting.
Built-in digital signal processing (DSP) adds dramatic pro-quality effects like
reverb and echo at the flip of a switch. Selecting from six preset effects makes
getting great sound easy and fast.
❧ It features custom designed high and low frequency drivers. The High
Frequency section employs an elliptical wave-guide horn that offers extra wide
dispersion for maximum coverage.
❧ With molded-in handle and wheels, you can roll the cabinet anywhere you
want. This makes Expedition Express ideal for boardrooms, classrooms and
fitness studios, either as a portable speaker or mobile all-in-one sound system.
❧ The Expedition Express takes the guesswork out of public presentations.
Everything you need is in one package: Speakers, built-in mixer with DSP,
Samson microphone and all the cables. Best of all, you don’t have to be an
engineer to hook it all up. Sets up (and packs up) in less than five minutes.
ACCESSORIES
Expedition Express All-In-One Portable PA System (SAEX250)
Rechargeable Battery (SARB2030)
Includes a cardioid dynamic microphone, a microphone clip, microphone
cable, extension speaker cable, .......2x protective nylon carrying cases and a
1-year warranty. Weighs 84.4 lb...........................................................................599.00
RB2030 rechargeable battery kit is for high quality sound
anywhere electricity is not available - from the street to the beach,
from parks to pool-side ..........................................................................89.95
PHOTO - VIDEO - PRO AUDIO
www.bhphotovideo.com
SPEAKERS
SAMSON
787
EXPEDITION PRO SERIES
Three Enclosures,
Unlimited Possibilities
The Expedition series are versatile two-way loudspeaker enclosures with
Celestion woofers, telescoping handle and locking wheels, available in three
different versions: passive (XP100), powered (XP200) and powered with a
built-in 4-channel mixer and digital signal processing (XP300).
Delivering huge sound with lots of headroom, a smooth top end and
articulate bass response—without taking up much space, these loudspeakers
represent smart solutions for clubs and performance halls, mobile DJ use,
houses of worship, corporate A/V, fixed installations and any application
where portable audio is required. Incredibly rugged, Expedition enclosures
are injection-molded with Polypropylene construction with substantial
internal bracing supporting the nearly 1/2” thick side wall construction.
Convenient fly-points, a steel grille and a scuff-resistant textured finish
ensure extreme versatility, ruggedness and dependable performance.
To finish your system, a range of Expedition options are available including
a rechargeable battery kit, a cassette recorder/player with pitch control and
plug-in Samson VHF and UHF micro wireless systems.
XP100
The passive XP100 enclosure is housed in a sleek molded cabinet with
substantial internal bracing to support its thick side wall construction.
Designed to be lightweight and compact, the XP100 is still rigid enough to
allow maximum energy to be transferred from the cabinet into the room.
Two 1/4” Speakon connectors, convenient fly-points, a steel grill and
scuff-resistant textured finish ensure exceptional versatility and long life.
The XP100 is a passive enclosure equipped with a custom designed,
Kevlar-impregnated 12” Low Frequency driver with a 2.5” voice coil and a
49 oz. barium ferrite magnet to produce an accurate, super-tight bass
response. The XP100’s High Frequency section employs a 1” titanium
compression driver along with an elliptical wave guide horn that controls
dispersion. This in combination with a phasing plug produces a linear
overall response with a clear, musical top end.
XP200
Using the same cabinet and speaker design as the XP100 the XP200 adds
200-watts of bi-amped power. It also includes an active crossover and
built-in limiter with two XLR inputs.
The XP200’s power module gives you three stages of speaker protection,
including relay switching for power up and power down. The onboard
limiter circuit ensures a clean output even when you push it to maximum
sound pressure levels. Because of its perfectly matched amplifier and
speakers, the XP200 is particularly effective as a powered monitor.
AC daisy-chain output for adding additional Expeditions enclosures in
stereo, recording and presentation or performance applications.
Exceptional
Versatility
Because of their telescoping (as well
as retractable) handle and wheels,
you can pull out the handle and roll
the cabinet anywhere you want.
This makes the Expedition series
ideal for boardrooms, classrooms,
and fitness studios, either as a
portable speaker (XP100 or XP200) or
mobile all-in-one sound system (XP300).
Optional hardware allows
you to mount Expedition
cabinets on wall and ceilings.
The MP1020 mounting plate
makes it easy to install the
cabinets anywhere you
want and is compatible
with industry standards
such as Omnimount.
In an angled position,
hey make perfect wedge
monitors.
(212) 444-6605 • 1-800-947-9905 • Quick Dial 92
PHOTO - VIDEO - PRO AUDIO
788
SPEAKERS
SAMSON
SAMSON
XP300 Expedition Pro
The most comprehensive version of Expedition, the XP300 is a powered loudspeaker with a
built-in 4-channel stereo mixer and digital effects processing. This all-in-one PA system is ideal
for people who want superior audio anywhere they go. Whether you just want rugged and
versatile loudspeaker enclosure that consistently delivers big sound, or a complete professional
audio system in a highly mobile design for today’s fast-paced world, the XP300 is the answer.
The XP300’s mixer features two bands of equalization, two Mic/Line channels and a Stereo
Channel with a mic preamp. In addition to a standard TRS stereo line input, channel three also
has RCA inputs that allow you to easily interface a CD, Mini Disk or Tape player. The digital
processing section consists of six high-quality presets that range from a touch of room ambience
to lush, reverberant halls. Versatile and easy to use, the XP300’s mixer has balanced XLR Left and
Right outputs for daisy-chaining additional enclosures (XP200) in stereo, recording and presentation or performance applications. The mixer’s output can be monitored via its multi-segment VU
meter, and there is also an LED meter indicating power level available from the optional RB20/30 rechargeable battery cartridge.
Like the XP100/200, the XP300’s enclosure is equipped with a custom designed, Kevlar-impregnated 12” Low Frequency driver with a
2.5” voice coil and a 49 oz barium ferrite magnet to produce an accurate, super-tight bass response. The XP300’s High Frequency section employs a 1” compression driver along with an elliptical wave guide horn that controls dispersion. This in combination with a
phasing plug produces a linear overall response with a clear, musical top end.
EX500 Active Subwoofer
The EX500 active subwoofer can produce 500 watts of power in tandem with a
custom, heavy-duty 15” low frequency driver. It functions as an ideal complement to
Expedition series cabinets, or any loudspeaker system, when the application requires
a focused yet deep bass response. The built in stereo crossover lets you use the EX500
in mono or as a common subwoofer in a stereo system. It also features a steel grill
and rigid corners for durability, as well as an integral pole mount for conveniently
mounting Expedition cabinets.
db500a Active Monitor System
Inside the rigid custom designed cabinet is an exclusively designed 15” driver, matched
with a 1.75” Neodymium high frequency driver, aimed through a 1” diameter horn.
The dB500a features 500 watts of Class H power (400 watts low frequency/100 watts
high frequency) and has a crossover designed for high SPL. The exclusive Optimax
signal processing circuitry provides total speaker protection but won’t cut the low end
at high volumes, as similar speakers with sliding filters do.
The back panel has a built-in mixer-like preamp section with mic and line inputs, XLR
connectors and level controls. Controls for the selectable low pass filter and Optimax
processing are also included.
The dB500a speaker cabinet features an array of mounting options. Designed with
floor monitoring in mind, they are also easily stacked or permanently installed. A 13⁄8”
pole receptacle is built in, and 10 reinforced fly points are available.
PHOTO - VIDEO - PRO AUDIO
www.bhphotovideo.com
SPEAKERS
TURBOSOUND
789
TXD SERIES
2-way Passive Loudspeakers
The Turbosound TXD Series two-way passive loudspeakers are
designed for a variety of sound reinforcement mobile and fixed
install applications. Consisting of the TXD-081, TXD-121, and
TXD-151 with 8-, 12-, and 15” reflex-loaded low frequency drivers
respectively, and 1” high frequency drivers that are complimented
by an internal passive crossover that ensure seamless transition
between the HF and LF drivers. The crossover circuitry features a
two-stage thermal overload protection system, that applies
transparent compression to the high frequency drivers as level
increase. Two Neutrik Speakon NL4MP speaker connectors allow
input and parallel connections to between TXD series cabinets
and bass enclosures.
The TXD Series loudspeakers are constructed out of 1/2” (TXD-081)
or 5/8” (TXD-121, TXD-151) birch plywood that is screwed and
glued together for maximum rigidity, while a grey powder coated perforated steel mesh grille protects the speakers.
Mounting options are provided via a 35mm pole socket, as well as rigging points on the top and rear of the cabinets for
suspended and angled placement in permanent installations using shoulder eyebolts. Additionally, the enclosure is also
fitted with internal rigging points for use with Turbosound and Omnimount wall and ceiling brackets. Rear access
recessed flush handles provide easy transport.
Passive Subwoofers
Also available in the TXD Series are the TXD-115 and TXD-118 passive, front-loaded 15” and 18” subwoofers (respectively).
Constructed out of 5/8” birch plywood and with pole mounting and optional M10 eyebolts for suspending the units, both
subs are ideal for adding extended low frequency capabilities to the TXD Series’ 2-way speaker systems.
Speaker Type
TXD-081
TXD-121
TXD-151
TXD-115
TXD-118
Two-way Passive
Two-way Passive
Two-way Passive
Subwoofer
Subwoofer
LF Driver
8”
12”
15”
15”
18”
HF Driver
1” Waveguide
1” Compression Driver
1” Compression Driver
N/A
N/A
70Hz - 20kHz ±4dB
60Hz - 20kHz ±4dB
45Hz - 20kHz ±4dB
43Hz - 150Hz ±4dB
36Hz - 150Hz ±4dB
100°H x 60°V
70°H x 40°V
70°H x 40°V
N/A
N/A
200 / 400
300 / 600
300 / 600
300 / 600
300 / 600
400 watts @ 8 ohms
600 watts @ 8 ohms
600 watts @ 8 ohms
600 watts @ 8 ohms
600 watts @ 8 ohms
93dB
97dB
99dB
96dB
98dB
116dB Continuous
122dB continuous
124dB continuous
121dB continuous
123dB continuous
8Ω
8Ω
8Ω
8Ω
8Ω
Passive Crossover
3kHz 12dB/oct HP
12dB/oct LP
1.8kHz 12dB/oct HP
12dB/oct LP
1.8kHz 24dB/oct HP
12dB/oct LP
12dB/oct LP @ 150Hz
12dB/oct LP @ 150Hz
Dimensions (HxWxD)
16.3” x 12.1” x 10.6”
21.8” x 16.2” x 13.9”
25.7” x 18.3” x 16.7”
25.7” x 18.3” x 16.7”
25.7” x 21.3” x 19.1”
24.9 lbs.
44 lbs.
61.6 lbs.
55 lbs.
61.6 lbs.
Frequency Response
Nominal Dispersion @ -6dB points
Power Handling (Watts RMS/Program)
Recommended Amplifier Power
Sensitivity (1 Watt @ 1 meter)
Maximum SPL
Nominal Impedance
Net Weight
(212) 444-6605 • 1-800-947-9905 • Quick Dial 92
PHOTO - VIDEO - PRO AUDIO
790
SPEAKERS
YA M A H A
CLUB SERIES V
Unpowered Speakers
Ideal for clubs, church installations and small
theaters, these rugged, durable performers
have a proven track record.
Now in there fifth generation, Yamaha Club
Series speakers feature larger enclosures for
improved low-frequency performance,
improved drivers for higher power handling,
redesigned crossovers, stronger grilles, and
dual Speakon and 1/4” connectors.
Club SeriesV speakers feature rugged steel
handles, metal corner protectors, and heavyduty steel grille for easy and secure handling.
Two input jacks mounted on a metal jack plate allow for loop-through connections. Rugged carpet-covered, trapezoidstyle cabinets allow seamless array arcs. Black carpet covering also helps them stand up to abuse.
S112V and S115V
12- and 15” 2-way Loudspeaker Systems
The S112V and S115V are trapezoid shaped cabinets, with oversize steel handles, steel corner
protectors, steel jackplate with two heavy duty 1/4” jacks, and a built-in pole socket (13⁄8”) for easy
stand mounting. The S112V’s 12” woofer is a high power, custom design, the S115V’s 15” woofer is a
high power, cast aluminum frame, with a cooling port in the pole piece for extended high power
handling. The high frequency driver on both the S112V and S115V is a custom 2” titanium diaphragm
(1” exit) design with an exclusive phase plug that reduces harmonic distortion inside the driver itself.
This driver is mated to a 90° x 40° constant directivity horn to give smooth, even coverage over the
pattern of the horn. The internal passive crossover has protection circuitry to help guard against
damage that may occur from over powering or sending clipping signals to the speakers.
SM10V/SM12V/SM15V
10-, 12- and 15” 2-way Floor Monitor Systems
The SM10V, SM12V and SM15V are low-profile, (horn beside woofer style) floor monitor
cabinets, with steel corner protectors, steel grille to protect the woofers, and a heavy steel
jackplate with 2 heavy-duty 1/4” jacks. A 13⁄8” pole socket is installed on the end of the cabinet
for easy pole mounting, FOH (front of house) duty. They are covered in tough, abuse
resistant black carpet. Their low frequency driver is a high power, cast aluminum frame,
with a cooling port in the pole piece for extended high power handling. High frequency
drivers are a custom, 2” diaphragm (1” exit) design with an exclusive phase plug that
reduces harmonic distortion inside the driver itself. This driver is mated to a 40∞ x 90∞
constant directivity horn to give smooth, even coverage over the pattern of the horn. The
internal passive crossover has protection circuitry to help guard against damage that may
occur from over powering or sending clipping signals (underpowering) to the speakers.
PHOTO - VIDEO - PRO AUDIO
www.bhphotovideo.com
SPEAKERS
YA M A H A
791
CLUB SERIES IV
SW115V 15”
Subwoofer
The SW115V is a low
profile subwoofer
system. Using a cast
frame 15” driver, it is
one of the most
cost effective ways
to add extra bass to
your system. Long travel for solid bass down
to 35Hz. Integral socket for main speaker pole.
The SW115V has a frequency response of
35Hz-2kHz, a sensitivity of 95dB, and is
20” x 24” x 21”. It weighs 64 lbs.
SW118V 18” Subwoofer
A low profile
subwoofer, the
SW118V uses a
cast frame 18”
drive to deliver
powerful low
frequency energy
to augment
smaller systems.
Large, heavy steel
handles make transporting the
SW118V an easy one person job. 24” x 29” x 25”.
S215V Dual 15”
2-way Speaker
SW218V Dual 18” Subwoofer
The SW215V is a dual 15” subwoofer in a particle
board enclosure (needed for rigidity). The
drivers are butyl surround, long travel, 3” voice
coil, vented pole drivers. They assure very high
SPL (sound pressure level) operation without
damage or fatigue. The enclosure is rectangular
in shape, and the baffle is designed to fold
back in the center of the cabinet to form the
port for this bass reflex design. This unique
construction keeps the large top and bottom sheets that form
the top and bottom of the cabinet from resonating. This makes the cabinet one of the most
rigid boxes available today. Installed in the top of the cabinet is a metal socket that accepts a
13⁄8” diameter tube to allow satellite placement of another loudspeaker.
Club Series V (‘C’ Version)
Club V loudspeakers with the C prefix are coated with a
heavy-duty elastomeric spray coating. Designed as an
installation alternative to the carpeted S versions, they
can easily fit any décor. The finish is very tough, and
readily paintable to match surroundings. The steel
grilles are foam-lined with acoustically transparent
material to provide a more subdued appearance.
C112V 12” 2-way Speaker (YAC112V)
With high-power woofer, titanium HF
driver. Great for vocals.
C115V 15” Speaker (YAC115V)
The S215V is a trapezoid shaped cabinet,
with oversize steel
handles, steel corner
protectors, and a
steel jackplate with
two heavy-duty 1/4”
jacks. Its covering is
tough black carpet,
and it has a heavy
gauge perforated
steel grille for driver
protection. The
woofers are high
power, vast aluminum
frame, with a cooling
port in the pole piece for extended high
power handling. The high frequency driver is
a custom, 2” diaphragm (1” exit) design that
mates to a 90∞ x 40∞ constant directivity
horn to give smooth, even coverage over the
pattern of the horn.
15” cast frame woofer with 1000 watt peak
power handling. Excellent for live music.
C215V 15” Speaker (YAC215V)
Two 15” cast frame woofers with 2000-watt
peak power handling. Perfect where high
sound pressure levels are required.
CM10V 10” Floor Speaker (YACM10V)
10” floor monitor with 1” titanium dome
compression driver. Can also be used as a
main speaker. Great where size is a concern.
CW115V 15” 2-Way Speaker (YACW115V)
15” cast frame driver with efficient
bass-reflex design. Integral socket for main
speaker mounting Solid response down
to 35Hz ......................................................379.00
CW118V 18” Speaker (YACW118V)
18” cast frame driver. 1200 watt peak
power handling. Bass reflex design 429.00
CW218V 18” Subwoofer (YACW218V)
Dual 18” subwoofer with unique folded
baffle design. Low-profile cabinet...649.00
C112VA 12” 2-way Speaker
12” 2-way floor monitor with 2” titanium
HF driver. Rugged, low-profile design.
Great for vocals.
with Flyable Hardware (YAC112VA)
12” hi-compliance woofer with 2” titanium
compression driver, 12 integral fly points
and bracket mount attach points. Terminal
strip for easy wiring. Ready to hang right
out of the box.
CM15V 15” 2-Way Speaker (YACM15V)
C115VA 15” 2-way Speaker
15” 2-way floor monitor with wide
frequency response. Pole socket allows
use as a main speaker.
with Flyable Hardware (YAC115VA)
15” version of the above. Ready to hang
right out of the box.
CM12V 12” 2-Way PA Speaker (YACM12V)
(212) 444-6605 • 1-800-947-9905 • Quick Dial 92
PHOTO - VIDEO - PRO AUDIO
792
SPEAKERS
YA M A H A
C SERIES and FLYABLE MODELS
Model
C112V(A)
C115V(A)
C215V
CM10V
CM12V
CM15V
CW115V
CW118V
CW218V
Woofer
12”
15”
15” (2)
10”
12”
15”
15”
18”
18” (2)
Tweeter (Diaphragm)
2” titanium
2” titanium
2” titanium
1” phenolic
2” titanium
2” titanium
n/a
n/a
n/a
Frequency Response (-10db)
60Hz-16kHz
55Hz-16kHz
42Hz-16kHz
70Hz-20kHz
60Hz-16kHz
55Hz-16kHz
35Hz-2kHz
30Hz-2kHz
30Hz-2kHz
Power Handling*
175/350/700
125/250/500
175/350/700
250/500/1000
250/500/1000
300/600/1200
600/1220/2400
250/500/1000 500/1000/2000
Sensitivity
97dB
99dB
99dB
96dB
97db
99db
95db
96db
98db
Max SPL
126dB
129dB
132dB
123dB
126db
129db
125db
127db
132db
16 x 25 x 13”
19 x 28 x 15”
19 x 46 x 23”
22 x 14 x 11”
25 x 16 x 13”
28 x 19 x 13”
20 x 24 x 21”
24 x 28 x 25”
48 x 23 x 26”
42.5 lbs.
60.5 lbs.
101 lbs.
27 lbs.
43 lbs.
57 lbs.
64 lbs.
71 lbs.
132 lbs.
Dimensions (WHD)
Weight
* (noise Per IEC RS-426 specifications/program/peak)
BR SERIES Unpowered Speakers
The BR series consists of five speakers designed to fit the budgets of small
churches, and schools, while delivering the full frequency response and
high output of more costly systems. Although their “BR” prefix was chosen
to represent “bass reflex”, it also proves very appropriate for describing the
line’s advanced feature set...
Built Right...
Combining their knowledge of acoustics and advanced computer controlled woodworking,
Yamaha Music Manufacturing in Thomaston, Georgia, crafts the BR line of sound reinforcement
loudspeakers. This world class, environmentally friendly, ISO 14001-registered facility carefully
assembles each cabinet to exacting tolerances. Each model’s large steel handles, corner
protectors, and built-in pole sockets, assure both durability and flexibility.
◆ A large non-resonant, constant-directivity
horn provides even 90° x 40° high-frequency
dispersion.
◆ Steel corner protectors keep your cabinets
Better Response...
BR cabinets are carefully designed for the best balance of small, easy to handle size and great
low-frequency response, using Bass Reflex technology. High-frequency response is also enhanced
with a new titanium HF driver and 90° by 40° non-resonant horn.
free from dings and damage associated with
frequent transport.
◆ Large metal handles mounted at each
cabinet’s center of gravity make them very
easy to carry.
Best Reliability...
◆ All models, including the monitors, come
BR-Series models are covered by a three-year warranty. With integral protection circuitry built
into the passive crossover, you can expect a long life of high output and minimal distortion.
MODEL
BR10
BR12
Woofer
10”
12”
Tweeter (diaphragm)
with stand/pole sockets for flexibility of use.
BR15
BR12M
BR15M
15”
12”
15”
1” titanium
Frequency Response (-10dB)
65Hz-20kHz
65Hz-20kHz
60Hz-20kHz
65Hz-20kHz
60Hz-20kHz
Power Handling (noise*/program/peak)
125/250/500
150/300/600
200/400/800
150/300/600
200/400/800
Nominal Impedance
Nominal Dispersion
Sensitivity 1W, 1m
8 ohms
90° H x 40° V C.D.
90° H x 40° V C.D.
90° H x 40° V C.D.
40° H x 90° V C.D.
40° H x 90° V C.D.
96dB
97dB
98dB
97dB
98dB
14 3⁄4 x 21 x 12 3⁄4”
15 3⁄4 x 221⁄2 x 131⁄4”
19” x 25 3⁄4 x 141⁄2”
221⁄2 x 16 x 131⁄4”
25 3⁄4 x 19 1⁄4 x 14 1⁄2”
31.5 lbs.
35.2 lbs.
46.9 lbs.
34.3 lbs.
46 lbs.
Input Connectors
Approximate Dimensions (WHD)
Weight
PHOTO - VIDEO - PRO AUDIO
2x 1/4” Phone
www.bhphotovideo.com
SPEAKERS
793
YA M A H A
MSR400 & MSR800W
Powered Speaker and Powered Subwoofer
Much of the work in putting together a high-performance sound
system involves amplifier and speaker selection and setup. Here are a
pair of solutions that can take you directly to great sound without
the usual complications. The MSR400 powered speaker can be used
alone or in combination with the MSR800W powered subwoofer to
assemble sound reinforcement systems from modest to massive. They
look great, too. So good, in fact, that they can be used as-is in many
permanent installations without requiring any cosmetic cover-up.
F E AT U R E S
◆ The MSR400 is a bi-amped, 400-watt, 2-way
system (12” woofer and 1.75” compression
driver). Frequency division is accomplished
prior to the power amplifiers via a line-level
electronic crossover—eliminating
problems that are virtually unavoidable in
conventional passive crossover networks.
◆
◆
Another advantage of a powered system is
that power can be assigned to low-frequency
and high-frequency units for optimum
efficiency as well as smooth, natural balance
across the entire audio spectrum.
The MSR400 has three parallel-connected
connectors—two balanced XLR-type
connectors and 1 balanced phone jack can
be used as either inputs or parallel outputs.
The MSR400 also has input level control for
matching with the source signal. Low and
high EQ controls can be used to adjust the
respective bands over a± 3dB range.
◆
The MSR400 accepts nominal input levels
ranging from 36dB to +4dB, so you can
directly connect any source from mics to
professional line-level gear.
◆
The MSR800W subwoofer is the perfect
companion for the MSR400, extending the
low end and completing the musical spectrum for maximum punch and impact.
◆
Both the MSR400 and MSR800W feature LED
power indicators as well as clip indicators
that warn of impending clipping. This
allows the engineer to make appropriate
adjustments to the source level.
◆
◆
Speaker placement is as much a performance
issue as it is a convenience and aesthetic
issue. Proper placement provides optimum
sound as well as coverage while being as
unobtrusive as possible. The MSR400 can
be stacked or pole-mounted (there is even
a pole-mount hole provided on the
companion MSR800W subwoofer). And its
flyable so you can benefit from the unrivaled
coverage and positioning precision that only
ceiling suspension can provide.
The high-quality birch plywood bass-reflex
cabinet houses a 15” cone woofer powered
by an ultra-efficient burst 800 watts amplifier,
a configuration that can deliver the elusive
40Hz through 120Hz frequency range with
precision and authority.
◆
Two balanced XLR connectors are provided
for connection to the source, and that same
signal can be directly passed on to the main
speakers via a pair of XLR THRU outputs.
Alternatively, the main speakers can be fed
by the MSR800W’s dual HIGH PASS outputs,
high-pass filtered at 80 Hz through 100 Hz,
depending on the setting of the cutoff
frequency control, with a steep 18dB/octave
cutoff slope.
The Advantage of Powered Speakers
MSR400 Specs
Type
Biamp. 2-way Powered Speaker
There are many advantages to using powered speakers – the most obvious being that you don’t
have to drag separate power amps around or find a place to install them. Fewer cables need
connection as well—for example, just plug your mixers outputs directly into the speaker inputs.
But there are sonic advantages as well. Optimum matching of amplifiers and speakers involves
much more than simple impedance figures, and can be a formidable task given the vast number
of choices available. In the MSR400 and MSR800W the internal amplifiers have been ideally mated
to their respective speakers in every way possible, delivering reproduction quality that only such
stringent matching can achieve.
Crossover Frequency
For a simple system, you can use just a pair of MSR400s and a small mixer (they have mic inputs as
well as line inputs, with gain controls, so in a pinch you can connect a mic directly to the speaker).
The MSR400 employs bi-amplification for the best possible sound across the entire audio spectrum.
But if you want serious low end, pair each speaker with a MSR800W subwoofer that delivers bass
your audience will feel as well as hear. A simple pole stand adapter allows an MSR400 to be piggybacked on each MSR800W for optimum positioning, phasing, and overall sound.
Type
1.6 kHz
Overall Frequency Response
50Hz - 20kHz
Maximum SPL
121dB (1m)
Dispersion
90° (H)/40° (V)
Dimension (W x H x D)
16” x 25 3⁄4” x 13 7⁄8”
Weight
50.7 lbs.
MSR800W Specs
Powered Subwoofer
Overall Frequency Response
40 - 120 Hz
Maximum SPL
122dB (1m)
Dimension (W x H x D)
23 5⁄8v x 20 5⁄8” x 231⁄4”
Weight
(212) 444-6605 • 1-800-947-9905 • Quick Dial 92
99.1 lbs.
PHOTO - VIDEO - PRO AUDIO
794
SPEAKERS
YA M A H A
MSR100
300-Watt Powered Speaker System
With the MSR100’s built-in 3-channel line mixer and power amplifier, you can actually use it as an
all-in-one PA system. The built-in mixer has independent gain controls on each of the three channels,
as well as master level and master low and high EQ controls, a link out jack so you can connect to
another MSR100, and a clip indicator. But the MSR100 also makes a great 100-watt powered speaker
for use with a small mixer. MSR100’s can be pole-mounted, wall-mounted, suspended, or stacked –
anywhere you need them. You can even lay them on their side for monitor service. The MSR100 is a
serious contender in the sound category, too, with a top-performance 100-watt amplifier perfectly
matched to a two-way speaker system consisting of a custom 8” woofer and 1” titanium diaphragm
compression driver feeding a 90° x 40° horn. A durable molded enclosure with integral handle makes
this one of the most portable, convenient speaker systems available.
F E AT U R E S
◆ All-in-one sound solution - powerful, versatile,
reliable. Compact in size but big in sound and
features, the MSR100 packs a powerful sonic
punch - making it ideal for a wide range of
applications.
◆ As a mixer, power amp, and speaker system
◆
The compact, lightweight MSR100 is ready
to go anywhere you go. Besides a built-in
handle, its distinctive design lets you
stand the unit upright for conventional
sound reinforcement, or lay it on its
angled side for use as a floor monitor.
combined in a single, compact unit, it’s perfect for small events and club gigs. Mix in a CD
player, rhythm machine and/or keyboard with
your voice - all without the need of a separate
mixer or power amplifier.
◆
Built-in 100-watt power amp ensures that you
will be heard with full dynamic range and
clarity. It has been optimized for use with the
speaker section of the MSR100 to give you the
clearest and cleanest sound possible.
◆
8” custom woofer and 1” pure titanium
diaphragm compression driver deliver the low
end and high frequencies. The MSR100’s horn
provides a wide 90° x 40° sound dispersion for
optimum audience coverage.
◆
◆
Simple but effective mixer built into the rear
provides 3 inputs with master EQ for precise
sound control. The input 1 XLR connector
accommodates almost any mic or line input
(with a -50dB/+4dB pad switch), while line
sources can be connected by phone jack to
the input 2 and input 3 connectors.
Each input has its own level control, with a
Master Level control for overall output.
Two-band EQ gives you further control over
the final sound. CLIP indicator alerts you when
the input signal is too high, letting you avoid
distortion. For larger events, the MSR100’s
special LINK OUT jack can be used to connect
multiple units and expand sound coverage.
PHOTO - VIDEO - PRO AUDIO
◆
The rugged MSR100 has a polypropylene
enclosure that stands up to the rigors of the
road. A variety of mounting options also let
you place it on a pole, suspend it from the
ceiling, attach it to a wall, or even safely stack
multiple units on the floor.
EMX5014C Powered Mixer
A winning combination of superior sound quality,
convenient mixing control, and reliability, the
EMX5014C is ideal for houses of worship, corporate
and educational facilities. This fully integrated mixer
offers a range of features to mix, process, and deliver
your sound with maximum quality and creative
control. Equipped with ultra-lightweight amplifier
circuits, power is the priority of the 500-watt per
channel multi-mode stereo power section.
A total of 14 input channels with a selection of mono
mic/line and stereo line inputs. Connections include
XLR, TRS 1/4” phone, and RCA. A power mode switch
allows the two amplifier channels to be used with
the stereo outputs, drive main speakers and separate monitor mixes, while power amp
mode selector switches allow you to configure the amp channels.
For sound shaping and feedback control, the EMX5014C includes 3-band EQ on each
input channel, a stereo 9-band graphic EQ on the main stereo output, and a separate
graphic for the monitor output. Each channel also contains a Feedback Channel Locator
(FCL) indicator that pinpoints the input channel creating the problem. Additionally,
channels 1 thru 6 provide single knob compressors.
Onboard signal processing includes a selection of 16 professional-grade programs
(reverb, echo, chorus, flanger, phaser, drum ambiance and distortion) from Yamaha’s
renowned SPX series processor products. In addition, onboard proprietary YSProcessing
tailors the signal for optimum use with Yamaha’s Club Series loudspeakers.
Can be used as a stand-alone unit or rack mounted with the optional RK5014 kit.
www.bhphotovideo.com
SPEAKERS
795
YA M A H A
STAGEPAS 300
Complete, Portable 300-watt PA System
There’s no telling where your presentation will take you.
But no matter where, Yamaha’s STAGEPAS 300 portable PA
system has all the power and high-quality sound you need
to fill a small performance space, yet it’s small and light
enough to bring it wherever you need it. Combining a
built-in powered mixer and PA speakers, it’s also incredibly
easy to use – allowing you to set up and be playing in a
matter of minutes!
Exceptionally compact and portable, it’s the perfect road
companion, providing powerful, reliable, convenient sound
reinforcement for a wide variety of applications. The
STAGEPAS 300 is ideal for a wide range of applications, including outdoor events, school functions, church gatherings,
conferences. Great sound has never been so portable – and so easy to use. High quality, convenience, and power to go!
F E AT U R E S
◆
The STAGEPAS 300 delivers a remarkably
clear, powerful sound. Its exceptional
high-quality and power makes it ideal for
almost any PA application. Its rugged,
durable construction makes it perfect for
the road. And its compact, all-in-one
convenience makes it an essential gig
companion you’ll never want to be without.
◆ Two passive speakers with two built-in 15’
powered mixer speaker cables. The two-way
bass reflex speakers are suitable as mains or
monitors
◆
◆
◆
Eight-channel powered mixer features four
mic plus two stereo line inputs and Class D
power amplifier (150w + 150W). The mixer
can be mounted on a mic stand with the
optional BMS10A mic stand adapter.
The built-in amp puts out a full 150 watts of
power into each channel, and utilizes Class
D amplification for maximum efficiency, low
heat, and remarkably high fidelity. It has all
the sonic muscle you need to fill small- and
medium-sized venues. Ready to perform –
wherever you go!
Easy-to-use mixer provides controls and
connections, for maximum flexibility in your
stage setup – including two sets of stereo
inputs for keyboards or CD/MP3 players, and
a high-quality digital reverb for adding a
rich ambience to your vocals.
◆
Independent level controls for the four
mic/line channels and the two stereo inputs
◆
Flexible placement options let you stand the
speakers up or lay them on their sides. Or
use the optional ADP138 adapter to put the
cabinets on speaker stands, high above the
the audience for optimum projection. With
the convenient Monitor Out jack and the
angled sides of the cabinet, you can even
use one of the speakers as a floor monitor.
◆
For minimum stage clutter, the built-in
powered mixer can be left inside the
storage compartment of one speaker during
operation. Speaker cables are included, too.
There’s even a convenient storage
compartment in the other speaker box for
packing the included power cable, speaker
cables, and manual. Carry the STAGEPAS
300 with you, and you’ve got all you need to
set up and perform – anywhere, anytime.
Optional Accessories
BMS10A: Mic Stand adapter makes it easy to
mount the mixer on a microphone stand.
ADP138: Stand mount for STAGEPAS 300
speakers. Fits on SS138B or any 13⁄8” pole.
SS138B: Aluminum tripod speaker stand
YBSP300: Rolling Case for STAGEPAS 300
General Specifications
Maximum Output Power 6Ω @ 10% THD at 1kHz (SPEAKER L/R)
150 W + 150 W
Maximum Output Power 6Ω @ 1% THD at 1kHz (SPEAKER L/R)
100 W + 100 W
Weight (mixer and two speakers)
18 kg
Speaker Enclosure
Bass-reflex type
LF Driver
8” Cone
HF Driver
1” Compression Driver
Cross Over Frequency
Frequency Range
Maximum Output Level (1m)
(212) 444-6605 • 1-800-947-9905 • Quick Dial 92
4 kHz
55 Hz - 20 kHz
112 dB
PHOTO - VIDEO - PRO AUDIO