Casio PX-830 User`s guide

2009年8月25日 火曜日 午後2時52分
ES
English
1 ページ
USER’S GUIDE
GUÍA DEL USUARIO
Please keep all information for future reference.
Guarde toda información para tener como referencia futura.
This recycle mark indicates that the packaging conforms to
the environmental protection legislation in Germany.
Esta marca de reciclaje indica que el empaquetado se
ajusta a la legislación de protección ambiental en Alemania.
Safety Precautions
Before trying to use the piano, be sure to read
the separate “Safety Precautions”.
Precauciones de seguridad
Antes de intentar usar el piano, asegúrese de
leer las “Precauciones de seguridad” separadas.
C
MA0908-B Printed in China
PX830ES1B
PX830ES1B
Español
PX830_es_Cover1-4.fm
PX830_es_Cover1-4.fm
2 ページ
2009年7月16日 木曜日 午後5時12分
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
MIDI Implementation Chart
Model PX-830
IMPORTANT SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
8.
9.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
Function
Default
Changed
1 - 16
1 - 16
1 - 16
1 - 16
Mode
Default
Messages
Altered
Mode 3
X
Mode 3
X
0 - 127
0 - 127
0 - 127*1
O 9nH v = 1 - 127
X 8nH v = 64
O 9nH v = 1 - 127
X 9nH v = 0, 8nH v =**
X
X
X
O
X
O
O
X
X
X
O
X
X
X
X
X
X
O
X
O
O
X
X
X
X
X
X
X
X
X
O
X
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Note
Number
True voice
Velocity
Note ON
Note OFF
After
Touch
Key’s
Ch’s
Pitch Bender
0, 32
1
5
6, 38
7
10
11
16
17
18
19
64
65
66
67
76
77
78
80
81
82
83
84
91
93
100, 101
120
121
The power indicator being unlit does not mean the apparatus is completely disconnected from the MAINS.
When you need to have the apparatus completely disconnected from the MAINS, you must unplug the power cord. For that purpose, locate
the apparatus in a way that secures easy access to the power cord.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the userís authority to operate the
equipment.
Declaration of Conformity
Model Number: PX-830
Trade Name: CASIO COMPUTER CO., LTD.
Responsible party: CASIO AMERICA, INC.
Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801
Telephone number: 973-361-5400
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Important!
Please note the following important information before using this product.
• Before using the AD-E24250LW Adaptor to power the unit, be sure to check the AC Adaptor for any damage first. Carefully check the power
cord for breakage, cuts, exposed wire and other serious damage. Never let children use an AC adaptor that is seriously damaged.
• The product is not intended for children under 3 years.
• Use only CASIO AD-E24250LW adaptor.
• The AC adaptor is not a toy.
• Be sure to disconnect the AC adaptor before cleaning the product.
This mark applies in EU countries only.
Recognized
Basic
Channel
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the
apparatus.
NOTICE
Transmitted
Control
Change
Program
Change
O
Remarks
*1: Depends on tone
*1: Depende del tono
**: no relation
**: sin relación
Bank select
Modulation
Portamento Time
Data entry LSB, MSB*2
Volume
Pan
Expression
DSP Parameter0*2
DSP Parameter1*2
DSP Parameter2*2
DSP Parameter3*2
Damper
Portamento Switch
Sostenuto
Soft pedal
Vibrato rate
Vibrato depth
Vibrato delay
DSP Parameter4*2
DSP Parameter5*2
DSP Parameter6*2
DSP Parameter7*2
Portamento Control
Reverb send
Chorus send
RPN LSB, MSB*2
All sound off
Reset all controller
O
0 - 127
:True #
System Exclusive
O
O
System
Common
: Song Pos
: Song Sel
: Tune
X
X
X
X
X
X
System
Real Time
: Clock
: Commands
O
O
X
X
Aux
: Local ON/OFF
: All notes OFF
: Active Sense
: Reset
X
O
X
X
X
O
O
X
Messages
Version : 1.0
*2
Remarks
*2: For details, see MIDI Implementation at http://world.casio.com/.
*2: si desea más información, vea Implementación MIDI en http://world.casio.com/.
Mode 1 : OMNI ON, POLY
Mode 3 : OMNI OFF, POLY
Mode 2 : OMNI ON, MONO
Mode 4 : OMNI OFF, MONO
Manufacturer:
CASIO COMPUTER CO.,LTD.
6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan
Responsible within the European Union:
CASIO EUROPE GmbH
Casio-Platz 1, 22848 Norderstedt, Germany
O : Yes
X : No
PX830_01_eTOC.fm
1 ページ
2009年7月16日 木曜日 午後12時39分
Getting Ready ........................................................................................................E-32
Assembling the Stand ............................................ E-32
Using the Keyboard Cover Spacer......................... E-36
Magnetism.............................................................. E-37
Power Outlet........................................................... E-37
General Guide ................................... E-2
FUNCTION Button...................................................... E-3
Saving Settings and Using Operation Lock ................ E-3
Playing with Different Tones ........... E-4
Selecting and Playing a Tone ..................................... E-4
To adjust the brilliance of a tone................................. E-5
Layering Two Tones ................................................... E-6
Using Effects............................................................... E-7
Using the Digital Piano’s Pedals................................. E-7
Using the Metronome ................................................. E-8
Playing a Piano Duet .................................................. E-9
Playing Back Built-in Songs .......... E-10
Playing Back All of the Built-in Songs....................... E-10
Playing Back a Specific Music Library Song............. E-10
Practicing with a Music Library Song........................ E-11
Recording and Play Back............... E-12
Tracks ....................................................................... E-12
To record to a specific track of a song...................... E-13
To record to one track of a song while listening
to the playback of the other track.............................. E-14
Playing Back from Digital Piano Memory.................. E-14
Deleting Recorded Data ........................................... E-15
Configuring Settings with the
Keyboard ......................................... E-16
To configure settings with the keyboard ................... E-16
Keyboard Keys Used for Configuring Settings ......... E-17
Parameter List .......................................................... E-18
Reverb................................................................... E-18
Chorus................................................................... E-18
Tone selection ....................................................... E-18
Brilliance (BRILLIANCE) ....................................... E-18
Layer balance........................................................ E-18
Tempo (TEMPO) ................................................... E-18
Song select (SONG SELECT)............................... E-18
Song volume (SONG VOLUME) ........................... E-18
Metronome volume (METRONOME VOLUME) .... E-18
Metronome beat (METRONOME BEAT)............... E-18
Keyboard key (Transpose) .................................... E-19
Keyboard tuning (Tuning)...................................... E-19
Octave shift ........................................................... E-19
Temperament (TEMPERAMENT) ......................... E-19
Temperament select
(TEMPERAMENT SELECT) ................................. E-19
Temperament Base note (BASE NOTE)............... E-19
Touch response (TOUCH RESPONSE) ............... E-19
Connecting Headphones.........................................E-37
Connecting Audio Equipment or an Amplifier .........E-38
Bundled and Optional Accessories .........................E-38
USB device mode (USB DEVICE MODE) ............. E-20
Send channel......................................................... E-20
Local control .......................................................... E-20
Card menu (CARD MENU).................................... E-20
Operation tone ....................................................... E-20
Back up.................................................................. E-20
Operation lock........................................................ E-20
Using a Memory Card ..................... E-21
Loading and Removing a Memory Card ................... E-22
Formatting a Memory Card ....................................... E-22
Saving a Recorded Song to a Memory Card ............ E-23
Loading Song Data from a Memory Card into
Digital Piano Memory ................................................ E-23
Deleting Memory Card Data...................................... E-24
Simple Play Back of a Song on a Memory Card ....... E-25
Saving Data to Digital Piano Memory
(Internal Area) Instead of a Memory Card................. E-25
Error Indicators.......................................................... E-26
Connecting to a Computer............. E-28
Minimum Computer System Requirements .............. E-28
Connecting the Digital Piano to Your Computer ....... E-28
Using MIDI ................................................................ E-29
Transferring Song Data with a Computer.................. E-29
Reference......................................... E-39
Troubleshooting ........................................................ E-39
Product Specifications............................................... E-40
Operating Precautions .............................................. E-41
Appendix............................................ A-1
Tone List ..................................................................... A-1
Song List ..................................................................... A-1
MIDI Implementation Chart
Company and product names used in this manual may
be registered trademarks of others.
E-1
English
Contents
PX830_e.book
2 ページ
2009年7月9日 木曜日 午後2時46分
General Guide
Bottom
1
2
4
5
Rear
3
Front
6
7
8
E-2
9
bk
bl
bm
bn
bo
bp
bq
PX830_e.book
3 ページ
2009年7月9日 木曜日 午後2時46分
General Guide
English
*CAUTION
• Make sure that the cover is fully open whenever you are playing on the keyboard. A partially open cover can
suddenly close unexpectedly and pinch your fingers.
NOTE
• The names shown here are always indicated in bold when they appear within the text of this manual.
1 Pedal connector
9 VOLUME controller
2 USB port
bk CARD/INTERNAL, FUNCTION button
3 LINE OUT R, L/MONO jacks
bl SONG a button
4 DC 24V terminal
bm RECORDER (L) button
5 PHONES jacks
bn METRONOME (R) button
6 Power lamp
bo GRAND PIANO (MODERN) button
7 SD CARD SLOT
bp GRAND PIANO (CLASSIC) button
8 POWER button
bq ELEC PIANO button
FUNCTION Button
The FUNCTION button is used when configuring a variety of different digital piano settings. The following are
FUNCTION button basics.
z To change a setting, hold down the FUNCTION button as you
press the keyboard key that is assigned the setting you want to
select.
Example: “To select a tone” on page E-4
NOTE
• For details about operations and settings, see “Configuring
Settings with the Keyboard” on page E-16.
Saving Settings and Using Operation Lock
Your digital piano lets you save its current settings and lock its buttons to protect against operation errors. For
details, see “Parameter List” on pages E-18 - E-20.
E-3
PX830_e.book
4 ページ
2009年7月9日 木曜日 午後2時46分
Playing with Different Tones
GRAND PIANO
FUNCTION
POWER
VOLUME
SONG a
METRONOME
ELEC PIANO
Selecting and Playing a Tone
The piano comes with 16 built-in tones.
• The names of the tones are marked above the keyboard keys to which they are assigned.
To select a tone
1.
Press the POWER button.
IMPORTANT!
• When you turn on the digital piano, it performs a power up operation in order to initialize its system. During system
initialization the tone button lamps cycle on and off in the sequence for about seven seconds to let you know that
system initialization is in progress.
2.
Select the tone you want.
z To select GRAND PIANO (MODERN or
CLASSIC) or ELEC PIANO
• Press one of the GRAND PIANO buttons
(MODERN or CLASSIC) or the ELEC PIANO
button to select the one you want.
• The button lamp of the selected tone will light.
E-4
z To select one of the other tones
• While holding down the FUNCTION button,
press the keyboard key that corresponds to the
tone you want to select.
PX830_e.book
5 ページ
2009年7月9日 木曜日 午後2時46分
Playing with Different Tones
Use the VOLUME controller to adjust the
volume.
NOTE
• GRAND PIANO tones (MODERN, CLASSIC)
Your digital piano has a total of 16 built-in tones.
The MODERN and CLASSIC tones are stereo
sampled tones that can be selected using the
GRAND PIANO buttons. Try using the GRAND
PIANO tones to familiarize yourself with their
distinctive sounds and characteristics.
Tone Name
Characteristics
MODERN
This tone provides a bright grand piano
sound. The volume and timbre of this
tone is quick to respond to different
keyboard pressures, and it has
relatively strong reverb. This tone is a
good choice for dynamic and lively
performances.
CLASSIC
This is a natural piano tone that closely
resembles the sound of an acoustic
grand piano. Reverb and other effects
are kept to a minimum in order to
enhance the impact of piano pedals
operations (acoustic resonance), for
musically delicate expressions. This
tone is a good choice for lesson and
practice sessions.
• The GRAND PIANO tone (VARIATION) is best for
playing along with an accompaniment.
Bass Tones (BASS 1, BASS 2)
To adjust the brilliance of a
tone
1.
While holding down the FUNCTION button,
use the BRILLIANCE keys to specify a
brilliance value in the range of –3 to 0 to 3.
For this type of sound:
Press this keyboard
key:
Mellower and softer
T
Brighter and harder
S
NOTE
• To return a tone to its initial default setting “0”,
press T and S at the same time.
Selecting either of the two BASS (LOWER) tones (1 or
2) in step 2 of the above procedure will assign the
selected bass tone to the low range (left side) of the
keyboard. The high range (right side) will be assigned
the tone that was selected when you pressed the
BASS 1 or BASS 2 key.
• BASS 1 and BASS 2 let you effectively split the
keyboard between two different tones.
Split Point
Low Range
High Range
BASS 1
PIPE ORGAN
(Currently selected tone.)
NOTE
• To return the keyboard to a single tone, select any
tone other than BASS 1 or BASS 2.
• You cannot select BASS 1 or BASS 2 when recording
to Track 2.
E-5
English
3.
PX830_e.book
6 ページ
2009年7月9日 木曜日 午後2時46分
Playing with Different Tones
Layering Two Tones
Use the following procedure to layer two tones, so they
sound at the same time.
When specifying two tones for layering, first tone you
select will be the main tone, while the second tone will
be the layered tone.
1.
To adjust the volume balance between
two layered tones
1.
While holding down the FUNCTION button,
use the keyboard keys shown below to adjust
the volume of the layered tones.
While holding down the FUNCTION button,
hold down the keyboard key for the main tone
as you press the keyboard key for the layered
tone.
Example: To layer HARPSICHORD and STRINGS 1
C1
C2
C3
C4
C5
C6
C7
C8
Initial default (Center)
Volume of the layered tone
(Second tone you selected)
Volume of the main tone
(First tone you selected)
• To return the volume setting to its initial default, hold
down the FUNCTION button and press both of the
keys at the same time.
HARPSICHORD
STRINGS 1
2.
To unlayer the keyboard, select another tone
by pressing the GRAND PIANO button or by
using the procedure under “Selecting and
Playing a Tone” (page E-4).
NOTE
• You also can layer piano tones by holding down one
of the GRAND PIANO buttons (MODERN or
CLASSIC) as you press the ELEC PIANO button.
• You cannot layer the BASS 1 or BASS 2 tone with
another tone.
• You cannot perform the layer operation when
recording to Track 2.
E-6
PX830_e.book
7 ページ
2009年7月9日 木曜日 午後2時46分
Playing with Different Tones
■ About DSP
Reverb : Makes your notes resonate.
Chorus : Adds more breadth to your notes.
To turn reverb on and off
1.
While holding down the FUNCTION button,
press the MODERN button to toggle reverb
on (lamp lit) and off (lamp unlit).
DSP makes it possible to digitally produce complex
acoustic effects. The DSP is assigned to each tone
whenever you turn on digital piano power.
English
Using Effects
Using the Digital Piano’s
Pedals
Your digital piano comes equipped with three pedals:
damper, soft, and sostenuto
To turn chorus on and off
1.
While holding down the FUNCTION button,
press the CLASSIC button to toggle chorus
on (lamp lit) and off (lamp unlit).
Soft pedal
Damper pedal
Sostenuto pedal
To configure reverb and chorus effect
settings
1.
While holding down the FUNCTION button,
press one of the Reverb or Chorus keyboard
keys.
1
2
3
4
Reverb
1
2
3
4
Chorus
Pedal Functions
z Damper Pedal
Pressing the damper pedal while playing will cause the
notes you play to reverberate for a very long time.
• When a GRAND PIANO tone (MODERN, CLASSIC,
VARIATION) is selected as the tone, pressing this
pedal will cause notes to reverberate (with acoustic
resonance) just like the damper pedal on an acoustic
grand piano. Half-pedal operation (pressing the
pedal part way) is also supported.
z Soft Pedal
Pressing this pedal while playing suppresses notes
played on the keyboard after the pedal was pressed,
and makes them sound softer.
z Sostenuto Pedal
Only the notes of the keys that are depressed when this
pedal is pressed are sustained until the pedal is
released.
Example: Selecting Reverb 4
• Reverb Value
To do this:
Select this setting:
Turn on reverb
1: Room
2: Small Hall
3: Large Hall
4: Stadium
• Chorus Value
To do this:
Select this setting:
Turn on chorus
1: Light Chorus
2: Medium Chorus
3: Deep Chorus
4: Flanger (Whooshing effect)
E-7
PX830_e.book
8 ページ
2009年7月9日 木曜日 午後2時46分
Playing with Different Tones
Using the Metronome
1.
Press the METRONOME button.
• This starts the metronome.
• The lamp above the SONG a button flash in time
with the metronome beat.
2.
To change the beat, hold down the
FUNCTION button as you press one of the
METRONOME BEAT keys to select a beat
setting.
4.
Press the METRONOME button or SONG
a button to turn off the metronome.
NOTE
• To return the tempo setting to the default tempo of
the currently selected Music Library tune, press the
+ and – keys at the same time in step 3. Pressing +
and – while recording will return the tempo value to
120.
To adjust the metronome volume
NOTE
• You can perform the following procedure at any
time, regardless of whether or not the metronome is
sounding.
1.
While holding down the FUNCTION button,
use the METRONOME VOLUME keys to
specify a volume value in the range of 0 to 42.
• For details about using the keyboard keys for
settings, see “Keyboard Keys Used for Configuring
Settings” on page E-17.
• Each press of the T orS key raises or lowers the
metronome volume value by 1.
• You can specify beats per measure value of 0, 2, 3, 4,
5, or 6. Specifying 0 as the setting plays a straight
click, without any chime. This setting lets you
practice with a steady beat.
3.
While holding down the FUNCTION button,
use the TEMPO keys to specify a tempo
value in the range of 20 to 255 beats per
minute.
• Each press of the + or – key raises or lowers the
tempo value by 1.
• You can use the value input keys (0 to 9) to enter a
specific three-digit. Be sure to input all three digits.
Example: To enter “96”, press keys 0, 9, 6.
E-8
NOTE
• To return to the initial default setting, press T and
S at the same time.
PX830_e.book
9 ページ
2009年7月9日 木曜日 午後2時46分
Playing with Different Tones
You can use the Duet Mode to split the piano’s
keyboard in the center so two people can play a duet.
Keyboard
Split point
Left keyboard
C3
C4
C5
(middle C)
Right keyboard
C6
C3
C4
C5
C6
You can change the ranges of the left and right
keyboards in octave units from their initial default
settings. This comes in handy, for example, if the initial
default range is not enough when one person is
playing the left hand part and another person is
playing the right hand part.
1.
(middle C)
The left and right side keyboards have virtually the
same range. The left pedal operates as the left side
damper pedal, while the right pedal is the right side
damper pedal.
While holding down the FUNCTION and
ELEC PIANO buttons, press the keyboard
C key that you want located at C4 (middle C)
of the left keyboard.
• This will sound the note assigned to C4 and change
the octave of the left keyboard.
Pedals
Left side damper pedal
Right side damper pedal
Left and right side damper pedal
The Duet Mode is the perfect way to conduct lessons,
with the teacher playing on the left side as the student
playing the same song on the right side.
NOTE
• Only the damper pedal for the right side keyboard
supports half-pedal operations.
1.
Example: Press the keyboard key of the leftmost C (C4)
will assign the range shown below.
Left keyboard
Select the piano tone you want to use for the
duet.
Example: GRAND PIANO (MODERN)
2.
While holding down the FUNCTION button,
press the ELEC PIANO button to toggle duet
on (lamp lit) and off (lamp unlit).
IMPORTANT!
• You cannot use the Duet Mode while recording
(page E-12).
C4
C5
C6
Right keyboard
C7
C3
C4
C5
C6
(Pressed key)
1 octave higher than initial
setting
2.
Unchanged
While holding down the FUNCTION and
ELEC PIANO buttons, press the keyboard
C key that you want located at C4 (middle C)
of the right keyboard.
• This will sound the note assigned to C4 and change
the octave of the right keyboard.
NOTE
• You can return the keyboards to their initial default
ranges by exiting and then re-entering the Duet
Mode.
E-9
English
Changing the Octaves of the duet
keyboards
Playing a Piano Duet
PX830_e.book
10 ページ
2009年7月9日 木曜日 午後2時46分
Playing Back Built-in Songs
FUNCTION
SONG a
METRONOME
RECORDER
Your digital piano comes with a Music Library of 60
built-in tunes. You can play all 60 tunes in sequence,
from beginning to end.
Playing Back All of the Built-in
Songs
1.
While holding down the FUNCTION button,
press the SONG a button.
• This will start repeat demo playback of the built-in
songs in sequence, from 01 through 60.
• You can play along with a song on the keyboard as it
is playing. The tone assigned to the keyboard is the
one that is preset for the song that is playing.
• You can select a specific song during demo playback.
For details, see step 2 under “Playing Back a Specific
Music Library Song”.
2.
Playing Back a Specific Music
Library Song
The Music Library includes both built-in songs (01 to
60), plus one song (61) that have been saved to digital
piano memory from a computer*. You can use the
procedure below to select one of these songs and play it
back.
* You can download music data from the Internet and
then transfer it from your computer to digital piano
memory. See “Transferring Song Data with a
Computer” on page E-29 for more information.
1.
Find the song number of the song you want to
play in the song list on page A-1.
2.
To change to another song, hold down the
FUNCTION button as you use the SONG
SELECT keys to specify a song number.
Press the SONG a button again to stop
built-in song play.
NOTE
• The tune selection and playback stop operations
described above are the only operations that are
possible during demo tune play.
• Each press of the + or – key raises or lowers the song
number by 1.
• You can use the value input keys (0 to 9) to enter a
specific two-digit song number. Be sure to input both
digits.
Example: To select song 08, enter 0 and then 8.
3.
Press the SONG a button.
• This starts the playback of the song.
E-10
PX830_e.book
11 ページ
2009年7月9日 木曜日 午後2時46分
Playing Back Built-in Songs
4.
To stop playback, press the SONG a
button again.
English
• Playback will stop automatically when the end of the
song is reached.
NOTE
• Pressing the + and – keys at the same time will select
song number 01.
• You also can adjust the playback tempo and volume
of the song. See “Configuring Settings with the
Keyboard” on page E-16 for more information.
Practicing with a Music Library
Song
You can turn off the left hand part or right hand part of
a song and play along on the piano.
NOTE
• The Music Library includes a number of duets.
While a duet is selected, you can turn off the first
piano <Primo> or second piano <Secondo> tone and
play along with the song.
PREPARATION
• Select the song you want to practice and adjust the
tempo. See “Configuring Settings with the
Keyboard” on page E-16.
• A number of tunes have tempo changes part way
through in order to produce specific musical effects.
1.
While holding down the FUNCTION button,
press the RECORDER (L) button or
METRONOME (R) button to select the part
you want to turn off.
• Pressing a button toggles its part on (button lamp on)
and off (button lamp off).
Both parts on
Left hand
2.
Right hand
part off
Left hand
part off
Right hand
Press the SONG a button.
• This starts playback, without the part you turned off
in step 1.
3.
4.
Play the missing part on the keyboard.
To stop playback, press the SONG a
button again.
E-11
PX830_e.book
12 ページ
2009年7月9日 木曜日 午後2時46分
Recording and Play Back
FUNCTION
SONG a
METRONOME
RECORDER
You can store the notes you play in digital piano
memory for later playback.
Tracks
A track is a container of recorded data, and a song
consists of two tracks: Track 1 and Track 2. You can
record each track separately and then combine them so
they play back together as a single song.
Track 1
Record
While playing
back. . .
Song
Recording Data Storage
• Starting a new recording deletes any data that was
previously recorded in memory.
• Should power fail during recording, all of the data in
the track you are recording will be deleted.
IMPORTANT!
• CASIO COMPUTER CO., LTD. takes no
responsibility for any damages, lost profits, or claims
by third parties arising from the deletion of recorded
data due to malfunction, repair, or for any other
reason.
Using the RECORDER Button
Track 2
Record
Each press of the RECORDER button cycles through
the recording options in the sequence shown below.
Lit
Flashing
Off
Memory Capacity
• You can record approximately 5,000 notes in digital
piano memory.
• The RECORDER button lamp will flash at high
speed when memory runs low.
• Recording stops automatically if the number of
notes in memory exceeds the maximum.
Recorded Data
• Keyboard play
• Tone used
• Pedal operations
• Reverb and chorus settings (Track 1 only)
• Tempo setting (Track 1 only)
• Layer setting (Track 1 only)
• Split setting (Track 1 only)
• Temperament and base note settings (Track 1 only)
• Octave shift setting (Track 1 only)
E-12
Playback
Standby
Record
Standby
Normal
PX830_e.book
13 ページ
2009年7月9日 木曜日 午後2時46分
Recording and Play Back
4.
• Recording will start automatically.
5.
After recording to either of the tracks of a song, you can
record to the other track while listening to playback
what you recorded in the first track.
1.
Start playing something on the keyboard.
To stop recording, press the SONG a
button.
• This will cause the RECORDER button lamp and the
lamp of the track you recorded to change from
flashing to lit.
• To play back the track you just recorded, press the
SONG a button.
Press the RECORDER button twice so its
lamp is flashing.
6.
After you are finished recording or playing
back, press the RECORDER button so its
lamp goes out.
• At this time the L lamp will flash to indicate that the
digital piano is standing by for recording to Track 1.
2.
While holding down the FUNCTION button,
press the RECORDER (L) button or
METRONOME (R) button to select the track
you want to record.
• Make sure that the indicator lamp for the record track
is flashing.
Track 1: L lamp
Track 2: R lamp
Example: Track 1 selected
3.
Select the tone and effects (Track 1 only) you
want to use in your recording.
• Tone (page E-4)
• Effects (page E-7)
NOTE
• If you want the metronome to sound while you are
recording, configure the beat and tempo settings,
and then press the METRONOME button. See
“Using the Metronome” on page E-8 for more
information.
E-13
English
To record to a specific track of
a song
PX830_e.book
14 ページ
2009年7月9日 木曜日 午後2時46分
Recording and Play Back
To record to one track of a
song while listening to the
playback of the other track
1.
Playing Back from Digital
Piano Memory
1.
Press the RECORDER button so its lamp is
lit.
Press the RECORDER button so its lamp is
lit.
NOTE
2.
3.
While holding down the FUNCTION button,
press the RECORDER (L) button or
METRONOME (R) button to select the track
you want to play back while recording.
Press the RECORDER button so its lamp is
flashing.
• This will cause the L lamp to flash.
4.
While holding down the FUNCTION button,
press the RECORDER (L) button or
METRONOME (R) button to select the track
you want to record.
• Make sure that the indicator lamp for the record track
is flashing.
Example: To listen to playback of Track 1 as you record
to Track 2
Lit (Play)
Flashing (Record Standby)
5.
Select the tone and effects (Track 1 only) you
want to use for your recording.
6.
Press the SONG a button or play
something on the keyboard.
• This will start both playback of the recorded track
and recording to the other track.
7.
E-14
To stop recording, press the SONG a
button.
• When a song has something recorded in both tracks,
you can turn off one track and play back just the
other track, if you want.
2.
Press the SONG a button.
• This starts playback of the song and/or track you
selected.
NOTE
• You can change the tempo setting as a track is
playing.
• Press the SONG a button again to stop playback.
PX830_e.book
15 ページ
2009年7月9日 木曜日 午後2時46分
Recording and Play Back
Deleting Recorded Data
English
The following procedure deletes a specific track of a
song.
IMPORTANT!
• The procedure below deletes all of the data of the
selected track. Note that the delete operation cannot
be undone. Check to make sure you really do not
need the data in digital piano memory before you
perform the following steps.
1.
Press the RECORDER button twice so its
lamp is flashing.
2.
While holding down the FUNCTION button,
press the RECORDER (L) button or
METRONOME (R) button to select the track
you want to delete.
3.
Press the RECORDER button until its lamp is
lit.
• This will cause the lamp of the track you selected in
step 2 of this procedure to flash.
Example: If you selected Track 2 for deletion
Off
4.
Flashing: Delete standby
Once again, hold down the FUNCTION
button and press the button that corresponds
to the track you want to delete (RECORDER
(L) or METRONOME (R)).
• This deletes the selected track and enters playback
standby.
• To cancel the delete operation at any time, press the
RECORDER button twice so its lamp is unlit.
NOTE
• Only the Digital Piano’s METRONOME (R) button
and RECORDER (L) button are operational from
step 3 until you actually perform the delete
operation in step 4. No other button operation can be
performed.
E-15
PX830_e.book
16 ページ
2009年7月9日 木曜日 午後2時46分
Configuring Settings with the Keyboard
FUNCTION
In addition to selecting tones and Music Library tunes,
you also can use the FUNCTION button in
combination with the keyboard keys to configure
effect, keyboard touch, and other settings.
To configure settings with the
keyboard
1.
2.
3.
Use the “Parameter List” on pages E-18 E-20 to find the setting you want to configure,
and note its details.
Use “Keyboard Keys Used for Configuring
Settings” on page E-17 to find the location on
the keyboard for configuring the setting you
want.
While holding down the FUNCTION button,
press the keyboard key for the setting you
want to configure.
• The digital piano will sound an operation tone after it
configures the setting.
Example: To lower the transpose setting by one
semitone
4.
Release the FUNCTION button to complete
the setting procedure.
NOTE
• You can configure the digital piano so no operation
tone sounds in step 3. For details, see “ck Operation
tone” under “Parameter List” on pages E-18 - E-20.
Keyboard Setting Operation Types
There are three types of operations that you can
perform while configuring settings with the keyboard
keys: Type A, Type B, and Type C.
Type A: Direct input
Example: Pressing the STRINGS keyboard key to select the
STRINGS 1 tone
Type B: Raising or lowering a setting using the + and
– or T and S keyboard keys
• Holding down a key raises or lowers the setting at
high speed.
• To return to the initial default setting, press both
keys at the same time.
Type C: Value input using the numeric keys (0 to 9)
Example: To enter “120”, press keys 1, 2, 0.
NOTE
Transpose T key
E-16
• You can find out what operation type applies to each
setting by checking the “Operation Type” in the
“Parameter List” on pages E-18 - E-20.
PX830_e.book
17 ページ
2009年7月9日 木曜日 午後2時46分
Configuring Settings with the Keyboard
Keyboard Keys Used for Configuring Settings
English
• The numbers 1 through cm correspond to the same numbers in the “Parameter List” on pages E-18 - E-20.
[Left keyboard]
1Reverb
2Chorus
3Keyboard key (Transpose)
4Keyboard tuning (Tuning)
5Octave shift
6Temperament
7Tempo/Temperament select
1
2
3
4
1
2
3
4
[Overall]
[Center keyboard]
8Song select/Base note
9Tone selection
cmOperation lock
[Right keyboard]
clBack up
ckOperation tone
btLocal control
bsSend channel
brLayer balance
bnMetronome volume
bmSong volume
blBrilliance
bkCard menu
bqUSB device mode
bpTouch response
boMetronome beat
−
+
OFF ON OFF ON OFF ON OFF
ON
E-17
PX830_e.book
18 ページ
2009年7月9日 木曜日 午後2時46分
Configuring Settings with the Keyboard
Parameter List
■ Tones
Parameter
Settings
Operation
Type
(page E-16)
Description
1 Reverb
1 to 4
Default: 2
A
Specifies the reverb of notes.
(page E-7)
2 Chorus
1 to 4
Default: 2
A
Controls the breadth of notes.
(page E-7)
9 Tone selection
See page E-4.
Default: GRAND
PIANO
(MODERN)
A
Assigns a tone to the keyboard.
(page E-4)
bl Brilliance
–3 to 0 to 3
Default: 0
B
Specifies the brilliance of notes.
(page E-5)
–24 to 0 to 24
Default: 0
B
Specifies the volume balance
between the main tone and the
layered tone. (page E-6)
(BRILLIANCE)
br Layer balance
Remarks
■ Song/Metronome
Parameter
Settings
7 Tempo (TEMPO) 20 to 255
Operation
Type
(page E-16)
Description
Remarks
B (+/–)
C (0 to 9)
Specifies the tempo of Music
Library songs, the metronome,
recording and playback, etc.
(page E-8)
• Always enter three digits when using the
number keys (0 to 9) to input a value.
Example: To input 90, enter 0, 9, 0 (leading
zero required).
• During recording, pressing + and – at the
same time sets a value of 120.
8 Song select
B (+/–)
C (0 to 9)
Selects a Music Library tune.
(page E-10)
• Always enter two-digits when using the
number keys (0 to 9) to input a value.
Example: To input 8, enter 0, 8 (leading
zero required).
• This setting cannot be changed while
recording.
bm Song volume
B
Sets the volume level of Music
Library playback.
bn Metronome
B
Specifies the metronome volume.
(page E-8)
bo Metronome beat 0, 2, 3, 4, 5, 6
A
Specifies the metronome beat.
(page E-8)
Default: 120
01 to 61
(SONG SELECT) Default: 01
00 to 42
(SONG VOLUME) Default: 42
00 to 42
volume
Default: 36
(METRONOME
VOLUME)
(METRONOME Default: 4
BEAT)
E-18
• The metronome beat setting cannot be
changed while playback of a Music Library
tune is in progress.
PX830_e.book
19 ページ
2009年7月9日 木曜日 午後2時46分
Configuring Settings with the Keyboard
■ Keyboard
3 Keyboard key
Operation Type
(page E-16)
Settings
Description
Remarks
–12 to 0 to 12
Default: 0
B
Raises or lowers the tuning of
the digital piano in semitone
steps.
• The transpose setting cannot be
configured while Music Library
playback is in progress or while in
the Duet Mode.
• Raising the key of the digital piano
can cause notes the highest part of
the range to become distorted.
4 Keyboard tuning –99 to 0 to 99
B
Raises or lowers the overall
pitch of the digital piano in
1-cent steps (100 cents =
1 semitone) from the standard
pitch of A4 = 440 Hz.
• The pitch setting cannot be changed
while playback of a Music Library
tune is in progress.
Change the range of the
keyboard in octave units.
• You can configure octave shift
settings for the main tone part and
layered tone part.
• You cannot configure octave shift
settings for split tone parts.
(Transpose)
(Tuning)
Default: 0
5 Octave shift
–2 to 0 to 2
Default: 0
B
6 Temperament
Temperament:
00 to 16
Base note:
–, +, 0 to 9 (C to B)
Hold down
FUNCTION as you
press each of the
following keyboard
keys.
(TEMPERAMENT)
7 Temperament
select
(TEMPERAMENT
SELECT)
8 Temperament
Base note
(BASE NOTE)
You can change the scale
(tuning system) of the
keyboard from standard equal
temperament to another tuning
that is more suitable for
Defaults:
playing Indian music, Arabic
Temperament: 00
1. TEMPERAMENT music, classical pieces, etc.
(Equal Temperament)
(6 )
Base note: C
2. TEMPERAMENT
SELECT (7)
3. BASE NOTE (8)
bp Touch response Off (OFF), 1 to 3
(TOUCH
RESPONSE)
Default: 2
A
<Temperaments>
00: Equal / 01: Pure Major /
02: Pure Minor / 03: Pythagorean /
04: Kirnberger 3 / 05: Werckmeister /
06: Mean-Tone / 07: Rast / 08: Bayati /
09: Hijaz / 10: Saba / 11: Dashti /
12: Chahargah / 13: Segah /
14: Gurjari Todi / 15: Chandrakauns /
16: Charukeshi
<Base notes>
–: C / +: C# / 0: D / 1: Eb / 2: E / 3: F /
4: F# / 5: G / 6: Ab / 7: A / 8: Bb / 9: B
Specifies the relative touch of
the keyboard keys.
Setting a smaller value causes
lighter touch to produce more
powerful sound.
E-19
English
Parameter
PX830_e.book
20 ページ
2009年7月9日 木曜日 午後2時46分
Configuring Settings with the Keyboard
■ MIDI and Other Settings
Parameter
Settings
bq USB device
MIDI, Storage
Default: MIDI
mode (USB
DEVICE MODE)
Operation
Type
(page E-16)
Description
Remarks
–
• While storage is selected for this setting, the
The digital piano enters MIDI
GRAND PIANO (MODERN, CLASSIC)
mode automatically when it is
and ELEC PIANO button lamps flash, and
connected to a computer by a USB
all other lamps are unlit.
cable. Select storage when saving
• All digital piano operations are disabled at
Recorder memory song data to a
this time.
computer or when loading
• Each press of the USB device mode
computer song data to digital
keyboard key toggles between the MIDI
piano memory. (page E-29)
and storage modes.
bs Send channel
01 to 16
Default: 01
B
Specifies one of the MIDI channels
(1 through 16) as the Send channel,
which is used for sending MIDI
messages to an external device.
bt Local control
Off, On
Default: On
A
• The Local control setting cannot be changed
Selecting “Off” for Local control
while playback of a Music Library tune is in
cuts off the digital piano’s sound
progress.
source, so no sound is produced by
the digital piano when keys are
pressed.
Off, On
(CARD MENU) Default: Off
–
Specifies the card function as save,
load, delete, or format (page E-21).
bk Card menu
ck Operation tone
Off, On
Default: On
A
Selecting “Off” disables sounding • This setting is retained even when the
digital piano is turned off.
of the operation tone whenever a
keyboard key is pressed while the • The operation tone setting cannot be
changed while Music Library playback is in
FUNCTION button is depressed.
progress, while the metronome is
sounding, and during recording.
cl Back up
Off, On
Default: Off
A
When “On” is selected for this
• The back up setting cannot be changed
setting, the digital piano will
while Music Library playback is in
remember its current settings*1,
progress, while the metronome is
sounding, in the Duet Mode, and during
and restore them when it is turned
recording.
on again.
When “Off” is selected, settings*2 *1The following settings are not remembered.
are reset to their initial defaults
• Duet Mode
whenever the digital piano is
• Tune LR (part)
turned on.
• Local control
*2Except for the operation tone on/off
setting.
cm Operation lock
Off, On
Default: Off
A
Selecting “On” for this setting locks • The operation lock setting cannot be
changed while Music Library playback is in
the digital piano’s buttons (except
progress, while the metronome is
for the power button and the
sounding, and during recording.
buttons required for unlock), so no
operation can be performed.
Turn on operation lock when you
want to protect against
unintentional button operations.
E-20
PX830_e.book
21 ページ
2009年7月9日 木曜日 午後2時46分
English
Using a Memory Card
FUNCTION
SONG a
METRONOME
MODERN
You can use the procedures in this section to save
songs you recorded on the Digital Piano (recorder
songs) to a memory card, and to use a memory card to
load songs to user song memory (Music Library 61).
z Use a memory card with a capacity of 2GB or less.
Use of a card with a capacity that is greater than
2GB or other types of memory cards is not
supported.
z In this manual, mentions of a “memory card” refer
to an SD memory card.
■ Types of Data
Supported
Operations
Data Type
User songs
(page E-29)
Recorder
songs
(page E-12)
Description
(File Name Extension)
Load
Save to
from
Memory
Memory
Card
Card
One of the following two
types of music data
1. CASIO format data
(CM2)
2. Standard MIDI files
(MID)
SMF Format 0 or
Format 1
–
O
Song data recorded on
this Digital Piano (MID)
O*
–
* Can be converted to a standard MIDI file (SMF
format 0, file name extension MID) and saved.
CLASSIC
SD CARD SLOT
ELEC PIANO
Card and Card Slot Precautions
IMPORTANT!
• Be sure to observe the precautions provided in the
documentation that comes with the memory card.
• Memory cards have a write-protect switch. Use it
when you want to protect the data on the card from
accidental deletion.
• Avoid using a memory card under the following
conditions. Such conditions can corrupt data stored
on the memory card.
• Areas subjected to high temperature, high
humidity, or corrosive gas
• Areas subjected to strong electrostatic charge and
digital noise
• Never touch the contacts of a memory card when
loading it or removing it from the Digital Piano.
• Never eject the memory card while data is being
written to or loaded from it. Doing so can corrupt the
data on the memory card and damage the memory
card slot.
• Never insert anything besides a memory card into
the card slot. Doing so creates the risk of
malfunction.
• Electrostatic charge from your fingers or the memory
card to the card slot can cause malfunction of the
Digital Piano. If this happens, turn the Digital Piano
off and then back on again.
• A memory card can become quite warm after very
long use in the memory card slot. This is normal and
does not indicate malfunction.
E-21
PX830_03_e.fm
22 ページ
2009年7月13日 月曜日 午後7時19分
Using a Memory Card
Loading and Removing a
Memory Card
2.
While holding down the FUNCTION button,
press the CARD MENU keyboard key.
The CARD lamp will flash.
IMPORTANT!
• A memory card must be positioned correctly when
being loaded into the Digital Piano. Trying to force
an improperly oriented memory card into the slot can
damage the memory card and the slot.
1.
With the top of the memory card facing
upwards (so you can see it), carefully insert it
into the Digital Piano’s memory card slot until
stops with a click.
Flashing
Top
2.
3.
Press the METRONOME (FORMAT) button.
The FORMAT lamp will light, which indicates the
format mode.
• To exit the format mode, press the FUNCTION
button.
To remove the memory card first press it into
the slot further.
This will cause the memory card to disengage and eject
partially. Pull the memory card the rest of the way out
of the slot.
Formatting a Memory Card
IMPORTANT!
• Format a memory card before using it for the first
time.
• Before formatting a memory card, make sure it does
not have any valuable data stored on it.
• The memory card format operation performed by this
Digital Piano is a “quick format”. If you want to
completely delete all of the data on the memory
card, format it on your computer or some other
device.
1.
Insert the memory card you want to format
into the Digital Piano’s memory card slot.
Make sure the write-protect switch of the memory card
is not in the write-protect position so writing is enabled.
E-22
Lit
4.
Press the SONG a button.
This starts formatting.
• Formatting is finished when the FORMAT lamp and
CARD lamp go out. The Digital Piano exits the
format mode at this time.
Formatting
started
Flashing
Formatting
finished
Unlit
PX830_e.book
23 ページ
2009年7月9日 木曜日 午後2時46分
Using a Memory Card
Use the procedure below to save data you recorded on
the Digital Piano to a memory card as a MIDI file (SMF
format 0).
1.
Insert a memory card into the Digital Piano’s
memory card slot.
2.
While holding down the FUNCTION button,
press the CARD MENU keyboard key.
The CARD lamp will flash.
■ Memory Card Data Storage
The above procedure stores Digital Piano data in a
folder named MUSICDAT on the memory card.
• The MUSICDAT folder is created automatically
when you format the memory card on the Digital
Piano (page E-22).
• The Digital Piano cannot load or delete any file that
is not in the MUSICDAT folder. You also will not be
able to load or delete any file stored in any subfolder
inside the MUSICDAT folder.
Loading Song Data from a
Memory Card into Digital
Piano Memory
You can use the procedure below to load user song
data (page E-29) from a memory card to Digital Piano
Music Library song number 61. After that, you can play
back the user song or use it for lesson play.
1.
On your computer, copy the song data into
the “MUSICDAT” folder.
• The Digital Piano recognizes only the first 99 files in
the “MUSICDAT” folder (sorted by file name).
Flashing
3.
2.
Insert the memory card into the piano’s
memory card slot.
3.
Press the FUNCTION button.
The CARD lamp will light.
• Note that the CARD lamp will not remain lit if you
hold down the FUNCTION button too long.
Press the CLASSIC (SAVE) button.
Lit
The SAVE lamp will light, which indicates the data save
mode.
• To exit the data save mode, press the FUNCTION
button.
4.
Lit
4.
Press the SONG a button.
This starts the data save operation.
• Data save is finished when the SAVE lamp and
CARD lamp go out. The Digital Piano exits the data
save mode at this time.
Data save
started
Flashing
While holding down the FUNCTION button,
use the SONG SELECT – and + keys to scroll
between songs.
• You also can jump to a specific song by using the
SONG SELECT keys to specify a sequential file
number from 01 to 99. Note, however, that file
numbers are not indicated in the file name.
Data save
finished
Unlit
E-23
English
Saving a Recorded Song to a
Memory Card
PX830_e.book
24 ページ
2009年7月9日 木曜日 午後2時46分
Using a Memory Card
5.
While holding down the FUNCTION button,
press the CARD MENU keyboard key.
Deleting Memory Card Data
You can use the procedure below to delete song data
stored in the memory card’s “MUSICDAT” folder.
The CARD lamp will flash.
1.
Insert the memory card into the piano’s
memory card slot.
2.
Press the FUNCTION button.
The CARD lamp will light.
• Note that the CARD lamp will not remain lit if you
hold down the FUNCTION button too long.
3.
• You also can jump to a specific song by using the
SONG SELECT keys to specify a sequential file
number from 01 to 99. Note, however, that file
numbers are not indicated in the file name.
Flashing
6.
Press the MODERN (LOAD) button.
The LOAD lamp will light, which indicates the data
load mode.
• To exit the data load mode, press the FUNCTION
button.
4.
While holding down the FUNCTION button,
press the CARD MENU keyboard key.
The CARD lamp will flash.
5.
Press the ELEC PIANO (DELETE) button.
The DELETE lamp will light, which indicates the data
delete mode.
• To exit the data delete mode, press the FUNCTION
button.
Lit
7.
While holding down the FUNCTION button,
use the SONG SELECT – and + keys to scroll
between songs in the “MUSICDAT” folder
and select the one you want.
Press the SONG a button.
Lit
This starts loading of the data to the Music Library song
number 61 (user song).
• Data loading is finished when the LOAD lamp and
CARD lamp go out. At this time you can play back
the loaded song by pressing the SONG a button.
Load started
Load finished
6.
Press the SONG a button.
This starts deletion of the selected data.
• Data delete is finished when the DELETE lamp and
CARD lamp go out. The Digital Piano exits the data
delete mode at this time.
Delete started
Flashing
Unlit
Flashing
E-24
Delete finished
Unlit
PX830_e.book
25 ページ
2009年7月9日 木曜日 午後2時46分
Simple Play Back of a Song on
a Memory Card
You can use the procedure below to play back a user
song (page E-29) stored on a memory card without
loading the song into Digital Piano memory (Music
Library song number 61).
1.
On your computer, copy the song data into
the “MUSICDAT” folder.
• The Digital Piano recognizes only the first 99 files in
the “MUSICDAT” folder (sorted by file name) for
playback.
Saving Data to Digital Piano
Memory (Internal Area) Instead
of a Memory Card
Even when you do not have a memory card loaded in
the Digital Piano’s memory card slot, you can save up
to about 4MB of data in the Digital Piano’s internal
memory area. You also can load and delete internal
memory area data using the same procedures that you
use with a memory card.
1.
Remove the memory card from the Digital
Piano’s memory card slot (page E-22).
2.
Insert the memory card into the piano’s
memory card slot.
3.
Press the FUNCTION button.
To do this
Perform this operation
The CARD lamp will light.
• Note that the CARD lamp will not remain lit if you
hold down the FUNCTION button too long.
Save data to
the internal
memory area
From step 2 under “Saving a Recorded
Song to a Memory Card” on page E-23
Load data
from the
internal
memory area
From step 3 under “Loading Song Data
from a Memory Card into Digital Piano
Memory” on page E-23
Delete data
from the
internal
memory area
From step 2 under “Deleting Memory
Card Data” on page E-24
Play back a
song in the
internal
memory area
From step 3 under “Simple Play Back of
a Song on a Memory Card” on page
E-25
Lit
4.
Press the SONG a button.
This will start playback of the first file in the folder.
• Press the SONG a button again to stop playback.
5.
While holding down the FUNCTION button,
use the SONG SELECT – and + keys to scroll
between songs.
• Removing the memory card from the slot enables
internal memory area data operations (save, load,
delete, playback).
• You also can jump to a specific song by using the
SONG SELECT keys to specify a sequential file
number from 01 to 99. Note, however, that file
numbers are not indicated in the file name.
6.
To exit the card song playback mode, press
the FUNCTION button so the CARD lamp
goes out.
• Note that the CARD lamp will not go out if you hold
down the FUNCTION button too long.
E-25
English
Using a Memory Card
PX830_e.book
26 ページ
2009年7月9日 木曜日 午後2時46分
Using a Memory Card
Error Indicators
The following shows how the lamps indicate the error type when an error occurs due to data transfer failure or
some other reason.
Lamps
Error Type
No Card
Cause
Action
1.The memory card is
not loaded correctly
in the Digital Piano’s
memory card slot.
1.Correctly load the
memory card into the
memory card slot.
2.The memory card
was removed while
some operation was
in progress.
2.Do not remove the
memory card while
any operation is in
progress.
1.There is no
MUSICDAT folder
(page E-23) on the
memory card.
1.Create a MUSICDAT
folder on the memory
card or format the
memory card on the
Digital Piano (page
E-22).
No File
2.There is no loadable 2.Move the file you
want to load or play
or playable file in the
into the memory
MUSICDAT folder.
card’s MUSICDAT
folder.
No Data
You are attempting to
save data to a memory
card when there is no
data to save.
Record something
before performing a
save operation.
The memory card is
write-protected.
Use the memory card’s
write protect switch to
enable writing.
Protect
ReadOnly
MediaFull
• Use a different name
A read-only file with
to save the new file.
the same name you are
trying to use is already • Remove the readonly attribute from
stored on the memory
the existing file and
card.
overwrite it with the
new file.
• Use a different
memory card.
1.Delete some of the
1.There is not enough
files on the memory
room available on the
card to make room
memory card.
for new data (page
E-24), or use a
different card.
2.There is not enough
room available in
Digital Piano
memory.
E-26
2.Delete some or all
user data from
Digital Piano
memory to make
room for new data.
27 ページ
2009年7月9日 木曜日 午後2時46分
Using a Memory Card
Lamps
Error Type
Cause
Action
Not SMF01
You are attempting to
play back SMF
Format 2 song data.
This Digital Piano
supports playback of
SMF Format 0 or
Format 1 only.
SizeOver
The data on the
memory card it too big
to play.
This Digital Piano
supports playback of
song data files with a
maximum size of
65 Kbytes.
1.The memory card
data is corrupted.
—
WrongDat
Convert
Format
Media R/W
2.The memory card
contains data that is
not supported by this
Digital Piano.
There is not enough
Digital Piano memory
available to convert a
recorder song
(page E-12) to SMF
data and store it on the
memory card.
Reduce the size of the
recorder song data by
deleting unneeded
tracks (page E-15), if
there are any.
1.The current memory
card format is not
compatible with this
Digital Piano.
1.Format the memory
card on the Digital
Piano (page E-22).
2.The memory card
capacity is greater
than 2GB.
2.Use a memory card
with a capacity of
2GB or less.
3.Memory card data is
corrupted.
3.Use a different
memory card.
1.Memory card data is
corrupted.
1.Use a different
memory card.
2.Digital Piano
2.Back-up Digital
memory is corrupted.
Piano memory data
by copying it to your
computer, and then
turn the Digital Piano
off and then back on
again. Note that you
may not be able to
back-up Digital Piano
data in certain cases.
E-27
English
PX830_e.book
PX830_e.book
28 ページ
2009年7月9日 木曜日 午後2時46分
Connecting to a Computer
You can connect the Digital Piano to a computer and
exchange MIDI data between them. You can send play
data from the Digital Piano to music software running
on your computer, or you can send MIDI data from
your computer to the Digital Piano for playback.
2.
After starting up your computer, use a
commercially available USB cable to connect
it to the Digital Piano.
Digital Piano USB port
USB cable
(A-B type)
Minimum Computer System
Requirements
The following shows the minimum computer system
requirements for sending and receiving MIDI data.
Check to make sure that your computer complies with
these requirements before connecting the Digital Piano
to it.
z Operating System
Windows® XP (SP2 or later)*1
Windows Vista® *2
Mac OS® X (10.3.9, 10.4.11 or later, 10.5.6 or later)
*1: Windows XP Home Edition
Windows XP Professional (32- bit)
*2: Windows Vista (32- bit)
z USB port
IMPORTANT!
• Never connect to a computer that does not conform
to the above requirements. Doing so can cause
problems with your computer.
A connector
B connector
Computer USB port
3.
Turn on the Digital Piano.
• If this is the first time you are connecting the Digital
Piano to your computer, the driver software required
to send and receive data will be installed on your
computer automatically.
4.
5.
Start up your computer’s music software.
Configure the music software settings to
select one of the following as the MIDI device.
CASIO USB-MIDI : (For Windows Vista, Mac OS X)
USB Audio Device: (For Windows XP)
• For information about how to select the MIDI device,
see the user documentation that comes with the
music software you are using.
IMPORTANT!
Connecting the Digital Piano
to Your Computer
IMPORTANT!
• Make sure you follow the steps of the procedure
below exactly. Connecting incorrectly can make data
send and receive impossible.
1.
Turn off the Digital Piano and then start up
your computer.
• Do not start up the music software on your computer
yet!
E-28
• Be sure to turn on the Digital Piano first before
starting up your computer’s music software.
NOTE
• Once you are able to connect successfully, there is no
problem with leaving the USB cable connected when
you turn off your computer and/or Digital Piano.
• For detailed specifications and connections that
apply to MIDI data send and receive by this Digital
Piano, see the latest support information provided
by the website at the following URL.
http://world.casio.com/
PX830_e.book
29 ページ
2009年7月9日 木曜日 午後2時46分
Connecting to a Computer
Using MIDI
3.
Change the digital piano’s USB device mode
to storage.
English
What is MIDI?
The letters MIDI stand for Musical Instrument Digital
Interface, which is the name of a worldwide standard
for digital signals and connectors that makes it possible
to exchange musical data between musical instruments
and computers (machines) produced by different
manufacturers.
NOTE
• For detailed information about MIDI
Implementation, visit the CASIO website at:
http://world.casio.com/.
• While holding down the FUNCTION button, press
the keyboard key that corresponds to the USB device
mode.
• After this setting is changed, the GRAND PIANO
(MODERN, CLASSIC) and ELEC PIANO button
lamps flash, and all other lamps are unlit.
• See “USB device mode (USB DEVICE MODE)” on
page E-20 for more information.
See “Send channel” and “Local control” on page E-20.
Transferring Song Data with a
Computer
Use the procedures in this section to transfer Recorder
memory data to a computer for storage, and to load
songs to user song memory (Music Library 61).
IMPORTANT!
• Turning off the Digital Piano while data is being
saved or loaded can cause all data currently stored
in Digital Piano memory (recorded songs, etc.) to be
deleted. Take care so power is not turned off
accidentally during data save and load operations. If
data is deleted, it will take longer than normal for the
Digital Piano to power up the next time you turn it on
(page E-4).
1.
Remove the memory card from the Digital
Piano’s memory card slot (page E-22).
4.
On your computer, perform the required
operation to display your computer’s storage
devices.
If your computer is
running this operating
system:
Do this:
Windows XP
Double-click “My Computer”.
Windows Vista
Double-click “Computer”.
Mac OS
Skip step 4 and double-click
“PIANO” on your Mac
desktop.
• The memory of this digital piano will appear as
“PIANO” under “Devices with Removable Storage”.
• You will not be able to transfer data between the
Digital Piano and a computer if a card is in the card
slot.
2.
Perform steps 1 through 3 of the procedure
under “Connecting the Digital Piano to Your
Computer” on page E-28.
E-29
PX830_e.book
30 ページ
2009年7月9日 木曜日 午後2時46分
Connecting to a Computer
5.
Double-click “PIANO”.
• “PIANO” contains folders named MUSICLIB and
RECORDER. Use MUSICLIB to load a song into the
piano’s user song memory (Music Library 61), and
RECORDER to transfer Recorder memory data to and
from your computer.
■ To load a song into user song memory
(Music Library 61)
1. Copy the file (.MID or .CM2) you want to load into
user song memory to the MUSICLIB folder.
2. Change the name of the file to BIDSNG01, with a file
name extension of .MID or .CM2.
• If there are two files with the names BIDSNG01.MID
and BIDSNG01.CM2 in the MUSICLIB folder, only
the BIDSNG01.MID data will be loaded into user
song memory. If you want the BIDSNG01.CM2 file
to be loaded in this case, change the name of the
BIDSNG01.MID to something else.
NOTE
Data Type
Folder
Name
File Name and Extension*
User songs
MUSICLIB
BIDSNG01.MID: SMF
format data (format 0/1)
BIDSNG01.CM2: CASIO
original format data
Recorder
memory data
RECORDER BIDREC01.CSR: CASIO
original format data
* Before starting a store or load operation, first check
the file name and extension to ensure it matches the
ones shown in this column.
IMPORTANT!
• The initial default configuration for Windows XP and
Windows Vista is to hide file name extensions.
Perform one of the following operations on your
computer to show file name extensions.
To show file name extensions under Windows XP
1. Open the folder you want.
2. On the [Tools] menu, click [Folder Options].
3. Click the [View] tab. In the [Advanced settings]
list, clear the check box next to [Hide extensions
for known file types].
4. Click [OK].
To show file name extensions under Windows Vista
1. Open Folder Options by clicking the [Start] button,
clicking [Control Panel], clicking [Appearance and
Personalization], and then clicking [Folder
Options].
2. Click the [View] tab. Under [Advanced settings]
clear the [Hide extensions for known file types]
check box.
3. Click [OK].
E-30
• The message “Cannot rename MIDIDATA” will
appear on your computer screen if you try to change
the name of the copied file to BIDSNG01.MID while
there is already a file in the MUSICLIB folder named
BIDSNG01.MID. Change the name of the current
BIDSNG01.MID to something else and then rename
the copied file to BIDSNG01.MID.
■ To transfer Recorder memory data between
the digital piano and your computer
To transfer the digital piano’s current Recorder
memory data to your computer, copy the contents of
the RECORDER folder to your computer.
To return Recorder data you previously saved to your
computer back to Recorder memory, copy it back to the
RECORDER folder (and replace the current
RECORDER folder contents).
6.
After the file copy operation is complete,
return the USB device mode to MIDI.
• If you are using a Macintosh, perform the eject
operation (drag them to the trash can).
• While holding down the FUNCTION button, press
the applicable keyboard key. See “USB device mode
(USB DEVICE MODE)” on page E-20 for more
information.
• Returning the USB device mode to MIDI will load the
contents of MUSICLIB into user song memory and
the contents of RECORDER into Recorder memory.
IMPORTANT!
• A data conversion error is indicated when both of the
SONG a button lamps, and the GRAND PIANO
(MODERN) button, GRAND PIANO (CLASSIC)
button, and ELEC PIANO button lamps are all lit,
and all other lamps are unlit.
PX830_e.book
31 ページ
2009年7月9日 木曜日 午後2時46分
Connecting to a Computer
You can use the procedure below at any time to copy
user song data to the PIANO drive (without putting it
in the MUSICLIB folder) for simplified playback on the
Digital Piano.
• When you copy a user song data file to the
MUSICLIB folder, you need to rename it according
to specified format (step 5, above). You do not need
to rename the file if you use the procedure below.
Using Your Digital Piano as a Memory
Card Reader
You can display the contents of the memory card
currently loaded in the Digital Piano’s card slot and
perform copy, delete, and other card operations from
your computer.
1.
Insert the memory card into the Digital
Piano’s card slot.
2.
Perform the procedure starting from step 2 on
page E-29.
In step 4 of the procedure, “SD_MMC” will appear in
place of “PIANO”. You can double-click “SD_MMC” to
display the contents of the card loaded in the Digital
Piano card slot, and change it as you like.
Copyrights
MIDI file song data
1.
CASIO format song data
Perform the previous procedure (“To transfer
Recorder memory data between the digital
piano and your computer”) to copy the user
song data file to the PIANO drive (Digital
Piano memory).
• The Digital Piano recognizes only the first 99 files in
the PIANO drive (sorted by file name) for playback.
2.
The rights of creators and copyright holders of music,
images, computer programs, databases, and other
data are protected by copyright laws. You are allowed
to reproduce such works for personal or noncommercial use only. For any other purpose, all
reproduction (including data format conversion),
modification, transfer of reproductions, distribution
over a network, or any other use without permission
of the copyright holder exposes you to claims for
damages and criminal prosecution for copyright
infringement and violation of the author’s personal
rights. Be sure to reproduce and otherwise use
copyrighted works only in accordance with applicable
copyright laws.
Press the Digital Piano’s FUNCTION (CARD/
INTERNAL) button.
The CARD lamp will light.
3.
Next, perform step 4 through 6 of the
procedure under “Simple Play Back of a Song
on a Memory Card” (page E-25).
E-31
English
Simple Playback of a User Song in Digital
Piano Memory PIANO Drive
PX830_03_e.fm
32 ページ
2009年7月17日 金曜日 午前10時48分
Getting Ready
*CAUTION
Assembling the Stand
Before assembling the stand, first take a few moments
to check that all of the items shown below are present.
• This stand does not include any of the tools required
for assembly. It is up to you to prepare a large
Philips head (+) screwdriver for assembly.
Before starting assembly, check to make sure that you
have all the parts shown below. You can find the
screws in a plastic bag inside of the polystyrene foam
packing material.
• Assembly of the stand should be performed by
at least two people working together.
• This stand should be assembled on a flat
surface.
• Do not remove the tape from the locations
shown in the nearby illustration until you finish
assembling the stand. Removing the tape before
assembly is complete is very dangerous
because it allows the keyboard cover to open
and close, creating the risk of pinching your
fingers between the cover and the Digital Piano.
Tape
Tape
B
C
D
A
E
F
O
G
P
H
• Take care that you do not pinch your fingers
between parts when assembling them.
• When placing the Digital Piano on the floor, be
sure to place it on something soft (a blanket,
cushion, etc.). Do not place the Digital Piano
directly onto the floor.
Q
I
J
K
R
L
M (a)
S
(b)
1.
Unfasten the band that fastens the pedal cord
to the back of the pedal unit E and extend
the pedal cord.
T
N
U
A
B
C
D
E
F
G
H
I
J
K
L
Side panel ........................... ×1
Side panel ........................... ×1
Back panel .......................... ×1
Back panel .......................... ×1
Pedal unit ............................ ×1
Screws ................................ ×8
Screw caps.......................... ×8
Screws ................................ ×2
Screws ................................ ×5
Screws ................................ ×3
Screws ................................ ×2
Clips .................................... ×2
E-32
M-(a) Bracket .......................... ×1
M-(b) Bracket .......................... ×1
N Brackets .............................. ×2
O Screw caps ......................... ×2
P Joint connectors.................. ×6
Q Polystyrene foam packing
R
S
T
U
material (Required for stand
assembly.)........................... ×1
Headphones hook............... ×1
Screw .................................. ×1
Keyboard cover spacer ....... ×1
Keyboard spacer hook ........ ×1
Pedal cable
PX830_03_e.fm
33 ページ
2009年7月13日 月曜日 午後7時20分
Getting Ready
Divide the polystyrene foam packing material
as shown in the nearby illustration.
4.
Attach the side panels A and B to the piano.
• Secure the side panels using four screws F.
F
• After dividing up the material, you should end up
with a total of six pieces named Q-(a), Q-(b), and
Q-(c), which you will use while assembling the stand.
English
2.
Digital Piano
B
F
Q-(a)
A
Q-(b)
5.
Q-(c)
3.
Place the Digital Piano on the packing
material pieces Q-(a), and the stand side
panels on the packing material pieces Q-(b)
and Q-(c) as shown in the illustration below.
connectors should be aligned with the holes in the
back panel C.
• Lift up the back panel C so its screw holes align with
the screw holes in the side panels, and then tighten
the screws F.
If you have trouble inserting the screws F into the
joint connector P holes, use a screwdriver to rotate
the joint connector ( in Figure).
Digital Piano
B
Q-(a)
*CAUTION
Q-(c)
Q-(b)
Q-(a)
• Never try to force the screws! Forcing the screws
F to turn while the joint connector P holes are
not aligned correctly can strip the screw threads.
• Partially tighten the screws on one side of the back
panel C and then fully tighten the screws on the
other side.
• Next, fully tighten the screws that you partially
tightened.
A
Q-(c)
Attach the back panel C to the side panels
A and B. Use the four screws F and four
joint connectors P.
• Insert the four joint connectors P at the four
locations on the back panel C. The holes in the joint
Q-(b)
P
P
B
F
Screw hole
C
F
A
E-33
PX830_03_e.fm
34 ページ
2009年7月17日 金曜日 午前10時50分
Getting Ready
6.
After ensuring that all of the screws are fully
tightened, remove the packing material and
stand up the stand.
10. Attach the brackets N to the side panels A
and B. Use the two screws H and two joint
connectors P to attach each side bracket.
• First, insert the joint connectors P into the side
• After standing up the stand, cover each of the eight
screws you have installed up to this point with the
screw caps G.
7.
panels. At this time, make sure that the joint
connector screw hole is oriented horizontally
(openings to the left and right).
• Secure the brackets N with the screws H.
If you have trouble inserting a screw H into the joint
connector P screw hole, use a screwdriver to rotate
the joint connector ( in Figure).
Attach the brackets M to the pedal unit E
and secure them with the screws J.
• Cover the screw heads with the screw caps O.
O
*CAUTION
• Never try to force the screws! Forcing a screw H
to turn while the joint connector P hole is not
aligned correctly can strip the screw threads.
J
Screw hole
M-(b)
J
E
B
P
M-(a)
8.
Attach the pedal unit E to the side panels A
and B as illustrated below.
N
• Do not tighten the screws yet.
H
B
A
E
9.
Secure the back panel D to the back panel C.
• Screw the screws I into the five holes in the back
panel D.
C
IX5
D
D
E-34
A
P
PX830_03_e.fm
35 ページ
2009年7月16日 木曜日 午後12時39分
Getting Ready
and securely tighten the two screws K
shown in the illustration below.
13. Install the headphones hook R.
(13-1) Insert the headphones hook R into the two holes
on the bottom of the piano.
(13-2) Use the screw S to secure the headphones hook
in place.
13-1
K
Tighten a screw K on the other side as well.
12. Connect the pedal cord.
• Making sure that the pedal cord plug is oriented as
shown in the illustration below, plug it into the pedal
connector on the bottom of the Digital Piano. Push
the plug fully into the connector as far as it will go.
• Use the clips L to secure the pedal cable to two
locations on the side panel B.
R
13-2
S
14. Install the keyboard spacer hook.
L
(14-1) Insert keyboard spacer hook U into the two
holes in the side panel B.
(14-2) Use the screw J to secure the keyboard spacer
hook to the side panel.
B
U
J
14-1
14-2
E-35
English
11. Go around to the front of the Digital Piano
PX830_03_e.fm
36 ページ
2009年7月16日 木曜日 午後12時39分
Getting Ready
15. Remove the tape from the Digital Piano, and
remove the cardboard and polystyrene foam
packing materials.
16. Open the keyboard cover and lower the
music stand as shown in the illustration
below.
• Once you lower the music stand, you do not need to
raise it again, even when you close the keyboard
cover.
Keyboard cover
Music stand
Using the Keyboard Cover
Spacer
*CAUTION
• Be sure to use the keyboard cover spacer
whenever the cover is closed.
Closing the keyboard cover without using the
spacer can cause the cover to deform under its
own weight.
1.
Whenever you close the keyboard cover,
insert the keyboard cover spacer T (page
E-32) at the position noted in the nearby
illustration.
• Note that the keyboard cover spacer is magnetic.
Though they are not visible, there are other magnets
located in the vicinity of the points marked (A) in the
illustration.
(A)
17. Connect the AC adaptor as described under
“Power Outlet” (page E-37).
• After you connect the AC adaptor, the Digital Piano
is ready to play. See page E-4 for information about
turning on power and playing.
Keyboard cover
spacer
NOTE
• While using the keyboard, store the spacer on the
hook as shown in the illustration below.
Hook
E-36
PX830_03_e.fm
37 ページ
2009年7月21日 火曜日 午後12時28分
Getting Ready
*CAUTION
• Take care to avoid placing a credit card, cash
card, pre-paid card, or any other magnetic card
in any of the locations indicated by (A) in the
illustration below. This product has built-in
magnets at the four locations marked (A), which
can damage the data on a magnetic card and
make the card unusable.
(A)
Note the following important precautions to avoid
damage to the AC adaptor and power cord.
• Never pull on the cord with excessive force.
• Never repeatedly pull on the cord.
• Never twist the cord at the base of the plug or
connector.
• Before moving the digital piano, be sure to unplug
the AC adaptor from the power outlet.
• Loop and bundle the power cord, but never wind it
around the AC adaptor.
IMPORTANT!
Power Outlet
Your digital piano runs on standard household power.
Be sure to turn off power whenever you are not using
the digital piano.
• Never connect the AC adaptor that comes with this
digital piano to any other device besides this piano.
Doing so creates the risk of malfunction.
• Make sure the digital piano is turned off before
plugging in or unplugging the AC adaptor.
• The AC adaptor will become warm to the touch after
very long use. This is normal and does not indicate
malfunction.
• Use the AC adaptor so its label surface is pointed
downwards. The AC adaptor becomes prone to
emitting electromagnetic waves when the label
surface is facing upwards.
Connecting Headphones
Bottom
PHONES jacks
Using an AC Adaptor
Commercially available
headphones
Use only the AC adaptor that comes with this Digital
Piano (JEITA Standard plug). Use of a different type of
AC adaptor can cause malfunction of the digital piano.
Specified AC Adaptor: AD-E24250LW
Bottom
DC 24V terminal
Household power outlet
Stereo standard plug
Connect commercially available headphones to the
PHONES jacks. Connecting headphones to either of
the PHONES jack cuts off output to the speakers,
which means you can practice even late at night
without bothering others. To protect your hearing,
make sure that you do not set the volume level too high
when using headphones.
AC adaptor
Power cord
E-37
English
■ About the AC adaptor that comes with the
Digital Piano
Magnetism
PX830_03_e.fm
38 ページ
2009年7月16日 木曜日 午後12時39分
Getting Ready
Connecting to Audio Equipment 1
NOTE
• Be sure to push the headphones plug into the
PHONES jacks as far as it will go. If you don’t, you
may hear sound from only one side of the
headphones.
• If the plug of the headphones you are using does not
match the PHONES jacks, use the applicable
commercially available adaptor plug.
• If you are using headphones that require an adaptor
plug, make sure you do not leave the adaptor
plugged in when you unplug the headphones. If you
do, nothing will sound from the speakers when you
play.
Connecting Audio Equipment
or an Amplifier
You can connect audio equipment or a music amplifier
to the Digital Piano and then play through external
speakers for more powerful volume and better sound
quality.
IMPORTANT!
• The Digital Piano automatically adjusts sound output
to optimize for headphone output (when headphones
are connected) or built-in speaker output (when
headphones are not connected). This also will cause
a change in the output quality from the Digital
Piano’s LINE OUT R and L/MONO jacks.
• Whenever connecting a device to the Digital Piano,
first use the VOLUME controller to set the volume to
a low level. After connecting, you can adjust the
volume to the level you want.
• Whenever you connect any device to the Digital
Piano, be sure to read the user documentation that
comes with the device.
Guitar amplifier
Keyboard amplifier, etc.
Use commercially available cables to connect the
external audio equipment to the piano’s LINE OUT
jacks as shown in Figure 1. LINE OUT R jack output
is right channel sound, while LINE OUT L/MONO
jack output is left channel sound. It is up to you to
purchase connecting cables like the ones shown in the
illustration for connection of audio equipment.
Normally in this configuration you must set the audio
equipment’s input selector to the setting that specifies
the terminal (such as AUX IN) to which the piano is
connected. Use the piano’s VOLUME controller to
adjust the volume level.
Connecting to a Musical Instrument
Amplifier 2
Use commercially available cables to connect the
amplifier to the piano’s LINE OUT jacks as shown in
Figure 2. LINE OUT R jack output is right channel
sound, while LINE OUT L/MONO jack output is left
channel sound. Connecting to the LINE OUT
L/ MONO jack only outputs a mixture of both
channels. It is up to you to purchase connecting cable
like the one shown in the illustration for connection of
the amplifier. Use the piano’s VOLUME controller to
adjust the volume level.
Bundled and Optional
Accessories
Use only accessories that are specified for use with this
Digital Piano.
Use of unauthorized accessories creates the risk of fire,
electric shock, and personal injury.
NOTE
INPUT 1
INPUT 2
Standard plug
Standard jack
Pin plug
Audio amplifier AUX IN jack, etc.
LEFT (White)
RIGHT (Red)
E-38
• You can get information about accessories that are
sold separately for this product from the CASIO
catalog available from your retailer, and from the
CASIO website at the following URL.
http://world.casio.com/
PX830_e.book
39 ページ
2009年7月9日 木曜日 午後2時46分
Troubleshooting
Problem
No sound is produced when I
press a keyboard key.
The pitch of the digital piano
is off.
Cause
1. The VOLUME controller is set to
“MIN”.
2. Headphones or an adaptor plug is
plugged into one of the PHONES
jacks.
3. MIDI Local control is turned off.
1. The digital piano’s key setting is
something other than “0”.
2. Digital piano tuning is incorrect.
3. Octave shift is enabled.
4. A non-standard temperament
setting is being used.
Nothing happens when I
press a pedal.
Tones and/or effects sound
strange. Turning power off
and then back on again does
not eliminate the problem.
Example: Note intensity does
not change even though I
alter key pressure.
I cannot transfer data after
connecting the digital piano
to a computer.
The pedal unit cable is not connected.
I cannot store data to a
memory card or load data
from a memory card.
It takes a long time before I
can use the Digital Piano after
I turn it on.
–
See
Page
1. Rotate the VOLUME controller more towards ) E-5
“MAX”.
2. Disconnect whatever is connected to the
) E-37
PHONES jacks.
Action
3. Turn on the Local control setting.
1. Change the key setting to “0”, or turn digital
piano power off and then back on again.
2. Adjust digital piano tuning, or turn the digital
piano off and then back on again.
3. Change the octave shift setting to 0.
4. Change the temperament setting to
“00: Equal”, which is the standard modern
tuning.
Connect the cable correctly.
) E-20
) E-19
) E-19
) E-19
) E-19
) E-35
The “Back up” feature is turned on.
Turn off “Back up”. Next, turn power off and then ) E-20
back on again.
–
) E-28
1. Check to make sure that the USB cable is
connected to the digital piano and computer,
and that the correct device is selected with
your computer’s music software.
2. Turn off the digital piano and then exit the
music software on your computer. Next, turn
the digital piano back on and then restart the
music software on your computer.
See “Error Indicators” on page E-26.
–
) E-29
It takes about 20 seconds after you turn on
Digital Piano memory data was
power to perform the memory format operation.
corrupted because a data transfer
Wait until the format operation is complete. Note
operation with a computer was in
that you should take care to avoid turning off the
progress the last time you turned off
Digital Piano while a data transfer operation with
the piano. When this happens, the
a computer is in progress.
Digital Piano performs a memory
format operation the next time you turn
it on. You cannot perform any other
operation while a format operation is in
progress.
This is an unavoidable result of the digital sampling process,* and does not indicate malfunction.
A tone’s quality and volume
sounds slightly different
* Multiple digital samples are taken for the low range, middle range, and high range of the original
depending where it is played
musical instrument. Because of this, there may be very slight differences in tonal quality and
on the keyboard.
volume between sample ranges.
This happens when the sounds of multiple parts are sounding at the same time while using layer,
When I press a button, the
note that is sounding cuts out using the Duet Mode, playing back a built-in tune, recording, etc. Pressing a button when one of
these conditions exists will cause the effect setting that is built into the tone to change automatically,
momentarily or there is a
which causes notes to cut out momentarily or causes a slight change in how effects are being
slight change in how effects
applied.
are applied.
E-39
English
Reference
PX830_03_e.fm 40 ページ
2009年8月25日 火曜日 午後2時58分
Reference
Product Specifications
Model
PX-830BK/PX-830BP
Keyboard
88-key piano keyboard, with Touch Response
Maximum Polyphony
128 notes
Tones
16
• Layer (excluding bass tones)
• Split (Low-range bass tones only)
Effects
Brilliance (–3 to 0 to 3), Reverb (4 types), Chorus (4 types), DSP, Acoustic Resonance
Metronome
• Beats: 0, 2, 3, 4, 5, 6
• Tempo Range: 20 to 255
Duet
Adjustable tone range (–1 to 2 octaves)
Music Library
• Number of Songs: 60, User Songs: 1 (memory capacity; up to 65KB)*
* Based on 1 KB = 1024 bytes, 1 MB = 10242 bytes
• Song volume: Adjustable
• Part On/Off: L, R
Recorder
•
•
•
•
•
Pedals
Damper (with half-pedal operation), Soft, Sostenuto
Other Functions
•
•
•
•
•
•
MIDI
16-channel multi-timbre receive
SD Memory Card
• SD memory card slot
• Supported SD Memory Cards: Up to 2GB
• Functions: SMF playback, file storage, file recall, card format
Inputs/Outputs
• PHONES jacks: Stereo standard jacks × 2
• Power: 24V DC
• LINE OUT R, L/MONO jacks: Standard jacks × 2
Output impedance: 2.3KΩ
Output voltage: 1.1V (RMS) MAX
• USB port: TYPE B
• Pedal connector
Speakers
φ 12cm × 2 (Output 20W + 20W)
Power Requirements
AC Adaptor: AD-E24250LW
Functions: Real-time recording, playback
Number of Song: 1
Number of Tracks: 2
Capacity: Approximately 5,000 notes total
Recorded Data Protection: Built-in flash memory
Touch Select: 3 types, Off
Transpose: 2 octaves (–12 to 0 to 12)
Tuning: A4 = 440.0 Hz ±99 cents (variable)
Temperament
Octave shift
Operation Lock
Power Consumption
24V = 60W
Dimensions
Digital Piano and Stand*: 137.1 (W) × 27.5 (D) × 76.2 (H) cm (54 × 10 13/16 × 30 inch)
* Keyboard cover closed.
Weight
Digital Piano and Stand: PX-830BK: Approximately 33.5kg (73.9 lbs)
PX-830BP: Approximately 35.2kg (77.6 lbs)
• Specifications and designs are subject to change without notice.
E-40
B
PX830_e.book
41 ページ
2009年7月9日 木曜日 午後2時46分
Operating Precautions
Be sure to read and observe the following operating
precautions.
■ Location
Avoid the following locations for this product.
• Areas exposed to direct sunlight and high humidity
• Areas subjected to temperature extremes
• Near a radio, TV, video deck, or tuner
The above devices will not cause malfunction of the
product, but the product can cause interference in
the audio or video of a nearby device.
■ User Maintenance
• Never use benzine, alcohol, thinner, or other
chemical agents to clean the product.
• To clean the product or its keyboard, wipe with a
soft cloth moistened in a weak solution of water and
a mild neutral detergent. Wring all excess moisture
from the cloth before wiping.
■ Included and Optional Accessories
Use only accessories that are specified for use with this
product. Use of unauthorized accessories creates the
risk of fire, electric shock, and personal injury.
■ Weld Lines
Lines may be visible on the exterior of the product.
These are “weld lines” that result from the plastic
molding process. They are not cracks or scratches.
■ Musical Instrument Etiquette
Always be aware of others around you whenever using
this product. Be especially careful when playing late at
night to keep the volume at levels that do not disturb
others. Other steps you can take when playing late at
night are closing the window and using headphones.
• Any reproduction of the contents of this manual,
either in part or its entirety, is prohibited. Except for
your own, personal use, any other use of the
contents of this manual without the consent of
CASIO is prohibited under copyright laws.
• IN NO EVENT SHALL CASIO BE LIABLE FOR
ANY DAMAGES WHATSOEVER (INCLUDING,
WITHOUT LIMITATION, DAMAGES FOR LOSS
OF PROFITS, BUSINESS INTERRUPTION, LOSS
OF INFORMATION) ARISING OUT OF THE USE
OF OR INABILITY TO USE THIS MANUAL OR
PRODUCT, EVEN IF CASIO HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES.
• The contents of this manual are subject to change
without notice.
■ AC Adaptor Handling Precautions
• Use a power outlet that is easily accessible so you
can unplug the AC adaptor when a malfunction
occurs or whenever else you need to do so.
• The AC adaptor is intended for indoor use only. Do
not use it where it might be exposed to splashing or
moisture. Do not place any container, such as a
flower vase, that contains liquid on the AC adaptor.
• Store the AC adaptor in a dry place.
• Use the AC adaptor in an open, well-ventilated area.
• Never cover the AC adaptor with newspaper, a table
cloth, a curtain, or any other similar item.
• Unplug the AC adaptor from the power outlet if you
do not plan to use the Digital Piano for a long time.
• Never try to repair the AC adaptor or modify it in
any way.
• AC adaptor operating environment
Temperature: 0 to 40°C
Humidity: 10% to 90% RH
• Output plug polarity:
E-41
English
Reference
PX830_e.book
42 ページ
2009年7月9日 木曜日 午後2時46分
Reference
AC Adaptor Handling Precautions
Model: AD-E24250LW
1. Read these instructions.
2. Keep these instructions on hand.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this product near water.
6. Clean only with a dry cloth.
7. Do not install near radiators, heat registers, stoves, or any other source of heat (including amplifiers).
8. Use only attachments and accessories specified by the manufacturer.
9. Refer all servicing to qualified service personnel. Servicing is required after any of the following occurs:
when the product is damaged, when the power supply cord or plug is damaged, when liquid is spilled into
the product, when a foreign object falls into the product, when the product is exposed to rain or moisture,
when the product does not operate normally, when the product is dropped.
10. Do not allow the product to be exposed to dripping or splashing liquid. Do not place any object containing
liquid on the product.
11. Do not allow the electrical load output to exceed the label rating.
12. Make sure the surrounding area is dry before plugging into a power source.
13. Make sure the product is oriented correctly.
14. Unplug the product during lightning storms or when you do not plan to use it for a long time.
15. Do not allow product ventilation openings to become blocked. Install the product in accordance with the
manufacturer’s instructions.
16. Take care the power cord is located where it will not be stepped upon or bent severely, particularly in
locations close to plugs and convenience receptacles, and in locations where it exits from the product.
17. The AC adaptor should be plugged into a power outlet as close to the product as possible to allow
immediate disconnection of the plug in case of emergency.
The symbol below is an alert indicating un-insulated hazardous voltage inside the product’s enclosure, which
may be sufficient to constitute the risk of electric shock to users.
’
The symbol below is an alert indicating the presence of important operating and maintenance (servicing)
instructions in the documentation that accompanies the product.
*
E-42
PX830_s.book
1 ページ
2009年7月15日 水曜日 午後2時8分
Appendix/Apéndice
Tone List/Lista de tonos
Tone Name/
Nombre de tonos
GRAND PIANO MODERN
Song List/Lista de canciones
Bank Select MSB/
Program Change/
MSB de selección de
Cambio de programa
banco
0
No./Nº
Song Name/Nombre de canciones
01
Nocturne Op.9-2
2
02
Fantaisie-Impromptu Op.66
Étude Op.10-3 “Chanson de l’adieu”
Étude Op.10-5 “Black Keys”
GRAND PIANO CLASSIC
0
1
03
GRAND PIANO VARIATION
0
0
04
ELEC PIANO
4
0
05
Étude Op.10-12 “Revolutionary”
Étude Op.25-9 “Butterflies”
FM E.PIANO
5
0
06
60’S E.PIANO
4
1
07
Prélude Op.28-7
HARPSICHORD
6
0
08
Valse Op.64-1 “Petit Chien”
VIBRAPHONE
11
0
09
Valse Op.64-2
Moments Musicaux 3
PIPE ORGAN
19
0
10
JAZZ ORGAN
17
0
11
Impromptu Op.90-2
ELEC ORGAN 1
16
0
12
Marche Militaire 1 (Duet)
ELEC ORGAN 2
16
1
13
Frühlingslied [Lieder Ohne Worte Heft 5]
Fröhlicher Landmann [Album für die Jugend]
STRINGS 1
49
0
14
STRINGS 2
48
0
15
Von fremden Ländern und Menschen [Kinderszenen]
BASS (LOWER) 1
32
0
16
Träumerei [Kinderszenen]
BASS (LOWER) 2
32
1
17
Tambourin
18
Menuet BWV Anh.114 [Clavierbüchlein der Anna Magdalena Bach]
19
Inventio 1 BWV 772
20
Inventio 8 BWV 779
21
Inventio 13 BWV 784
22
Praeludium 1 BWV 846 [Das Wohltemperierte Klavier 1]
23
Le Coucou
24
Gavotte
25
Sonatina Op.36-1 1st Mov.
26
Sonatine Op.20-1 1st Mov.
27
Sonate K.545 1st Mov.
28
Sonate K.331 3rd Mov. “Turkish March”
29
Rondo K.485
30
Für Elise
31
Marcia alla Turca
32
Sonate Op.13 “Pathétique” 1st Mov.
33
Sonate Op.13 “Pathétique” 2nd Mov.
34
Sonate Op.13 “Pathétique” 3rd Mov.
35
Sonate Op.27-2 “Moonlight” 1st Mov.
36
Rhapsodie 2
37
Waltz Op.39-15 (Duet)
38
Liebesträume 3
39
Blumenlied
40
La Prière d’une Vierge
41
Csikos Post
42
Humoresque Op.101-7
43
Melodie [Lyrische Stücke Heft 2]
44
Sicilienne Op.78
45
Berceuse [Dolly] (Duet)
46
Arabesque 1
47
La Fille aux Cheveux de Lin [Préludes]
48
Passepied [Suite bergamasque]
49
Gymnopédie 1
50
Je Te Veux
51
Salut d’Amour
52
The Entertainer
53
Maple Leaf Rag
54
L’arabesque [25 Etüden Op.100]
55
La Styrienne [25 Etüden Op.100]
56
Ave Maria [25 Etüden Op.100]
57
Le retour [25 Etüden Op.100]
58
La chevaleresque [25 Etüden Op.100]
59
No.13 [Études de Mécanisme Op.849]
60
No.26 [Études de Mécanisme Op.849]
A-1
PX830_es_Cover1-4.fm
2 ページ
2009年7月16日 木曜日 午後5時12分
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
MIDI Implementation Chart
Model PX-830
IMPORTANT SAFETY INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
8.
9.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit
from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has been dropped.
Function
Default
Changed
1 - 16
1 - 16
1 - 16
1 - 16
Mode
Default
Messages
Altered
Mode 3
X
Mode 3
X
0 - 127
0 - 127
0 - 127*1
O 9nH v = 1 - 127
X 8nH v = 64
O 9nH v = 1 - 127
X 9nH v = 0, 8nH v =**
X
X
X
O
X
O
O
X
X
X
O
X
X
X
X
X
X
O
X
O
O
X
X
X
X
X
X
X
X
X
O
X
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Note
Number
True voice
Velocity
Note ON
Note OFF
After
Touch
Key’s
Ch’s
Pitch Bender
0, 32
1
5
6, 38
7
10
11
16
17
18
19
64
65
66
67
76
77
78
80
81
82
83
84
91
93
100, 101
120
121
The power indicator being unlit does not mean the apparatus is completely disconnected from the MAINS.
When you need to have the apparatus completely disconnected from the MAINS, you must unplug the power cord. For that purpose, locate
the apparatus in a way that secures easy access to the power cord.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void the userís authority to operate the
equipment.
Declaration of Conformity
Model Number: PX-830
Trade Name: CASIO COMPUTER CO., LTD.
Responsible party: CASIO AMERICA, INC.
Address: 570 MT. PLEASANT AVENUE, DOVER, NEW JERSEY 07801
Telephone number: 973-361-5400
This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
Important!
Please note the following important information before using this product.
• Before using the AD-E24250LW Adaptor to power the unit, be sure to check the AC Adaptor for any damage first. Carefully check the power
cord for breakage, cuts, exposed wire and other serious damage. Never let children use an AC adaptor that is seriously damaged.
• The product is not intended for children under 3 years.
• Use only CASIO AD-E24250LW adaptor.
• The AC adaptor is not a toy.
• Be sure to disconnect the AC adaptor before cleaning the product.
This mark applies in EU countries only.
Recognized
Basic
Channel
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the
apparatus.
NOTICE
Transmitted
Control
Change
Program
Change
O
Remarks
*1: Depends on tone
*1: Depende del tono
**: no relation
**: sin relación
Bank select
Modulation
Portamento Time
Data entry LSB, MSB*2
Volume
Pan
Expression
DSP Parameter0*2
DSP Parameter1*2
DSP Parameter2*2
DSP Parameter3*2
Damper
Portamento Switch
Sostenuto
Soft pedal
Vibrato rate
Vibrato depth
Vibrato delay
DSP Parameter4*2
DSP Parameter5*2
DSP Parameter6*2
DSP Parameter7*2
Portamento Control
Reverb send
Chorus send
RPN LSB, MSB*2
All sound off
Reset all controller
O
0 - 127
:True #
System Exclusive
O
O
System
Common
: Song Pos
: Song Sel
: Tune
X
X
X
X
X
X
System
Real Time
: Clock
: Commands
O
O
X
X
Aux
: Local ON/OFF
: All notes OFF
: Active Sense
: Reset
X
O
X
X
X
O
O
X
Messages
Version : 1.0
*2
Remarks
*2: For details, see MIDI Implementation at http://world.casio.com/.
*2: si desea más información, vea Implementación MIDI en http://world.casio.com/.
Mode 1 : OMNI ON, POLY
Mode 3 : OMNI OFF, POLY
Mode 2 : OMNI ON, MONO
Mode 4 : OMNI OFF, MONO
Manufacturer:
CASIO COMPUTER CO.,LTD.
6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan
Responsible within the European Union:
CASIO EUROPE GmbH
Casio-Platz 1, 22848 Norderstedt, Germany
O : Yes
X : No
2009年8月25日 火曜日 午後2時52分
ES
English
1 ページ
USER’S GUIDE
GUÍA DEL USUARIO
Please keep all information for future reference.
Guarde toda información para tener como referencia futura.
This recycle mark indicates that the packaging conforms to
the environmental protection legislation in Germany.
Esta marca de reciclaje indica que el empaquetado se
ajusta a la legislación de protección ambiental en Alemania.
Safety Precautions
Before trying to use the piano, be sure to read
the separate “Safety Precautions”.
Precauciones de seguridad
Antes de intentar usar el piano, asegúrese de
leer las “Precauciones de seguridad” separadas.
C
MA0908-B Printed in China
PX830ES1B
PX830ES1B
Español
PX830_es_Cover1-4.fm