Serial Device Servers
5
Serial Device Server Selection Guide
5-2
Serial Device Servers
EKI-1521
EKI-1522
EKI-1524
1-port RS-232/422/485 Serial Device Server
2-port RS-232/422/485 Serial Device Server
4-port RS-232/422/485 Serial Device Server
5-5
EKI-1528
EKI-1526
8-port RS-232/422/485 Serial Device Server
16-port RS-232/422/485 Serial Device Server
5-6
ADAM-4571/L
ADAM-4570/L
1-port RS-232/422/485 Serial Device Server
2-port RS-232/422/485 Serial Device Server
5-8
EKI-1351
EKI-1352
1-port RS-232/422/485 to 802.11b/g WLAN Serial Device Server
2-port RS-232/422/485 to 802.11b/g WLAN Serial Device Server
5-9
iGateway GPRS Serial Device Servers
EKI-1321 (New)
EKI-1322 (New)
1-port RS-232/422/485 to GPRS Serial Device Server
2-port RS-232/422/485 to GPRS Serial Device Server
5-10
EKI-1221
EKI-1222
EKI-1224
1-port Modbus Gateway
2-port Modbus Gateway
4-port Modbus Gateway
5-11
EKI-1221D (New)
EKI-1222D (New)
1-port Modbus Gateway with Integrated Ethernet Cascading
2-port Modbus Gateway with Integrated Ethernet Cascading
5-12
Modbus Gateways
Programmable Device Servers
EKI-1121L
EKI-1122L
1-port Programmable Device Server
2-port Programmable Device Server
5-13
EKI-1126 (New)
16-port RISC-based Programmable Serial Device Server with USB and SD
5-14
To view all of Advantech’s Serial Device Servers, please visit www.advantech.com/products.
Serial Device Server
Selection Guide
Serial Device Servers
Model Name
EKI-1351
EKI-1352
EKI-1521
Product Description
EKI-1524
4-port RS-232/422/485
Serial Device Server
No. of Ethernet Port
WLAN
WLAN
2
2
No. of Serial Port
1
2
1
2
4
Ethernet Interface
802.11 b/g
802.11 b/g
10/100 Mbps
10/100 Mbps
10/100 Mbps
Serial Type
RS-232/422/485
Connector
2
RS-232/422/485
RS-232/422/485
RS-232/422/485
RS-232/422/485
Ethernet
SMA
SMA
RJ45
RJ45
RJ45
Serial
DB9 Male
DB9 Male
DB9 Male
DB9 Male
DB9 Male
Baud Rate
50 bps ~ 921.6 kbps, any baud rate setting
Operating Mode
Virtual COM, TCP Server, TCP Client, UDP, Peer to Peer, AT Command, and RFC2217 modes
Driver
32-bit/64-bit Windows 2000/XP/Vista/7, Windows Server 2003/2008, Windows CE 5.0/6.0, and Linux
Class I Division 2 Groups ABCD T4, UL/cUL 60950-1, FCC, CE
Certifications
5-9
Page
5-9
5-5
5-5
5-5
Model Name
EKI-1528
EKI-1526
ADAM-4571
ADAM-4571L
ADAM-4570
ADAM-4570L
Product Description
8-port
RS-232/422/485
Serial Device
Server
16-port
RS-232/422/485
Serial Device
Server
1-port
RS-232/422/485
Serial Device
Server
1-port RS-232
Serial Device
Server
2-port
RS-232/422/485
Serial Device
Server
2-port RS-232
Serial Device
Server
No. of Ethernet Port
2
2
1
1
1
1
No. of Serial Port
8
16
1
1
2
2
Ethernet Interface
10/100 Mbps
10/100 Mbps
10/100 Mbps
10/100 Mbps
10/100 Mbps
10/100 Mbps
Serial Type
Connector
RS-232/422/485
RS-232/422/485
RS-232/422/485
RS-232
RS-232/422/485
RS-232
Ethernet
RJ45
RJ45
RJ45
RJ45
RJ45
RJ45
Serial
RJ45
RJ45
DB9 Male
DB9 Male
RJ48
RJ48
50 bps ~ 921.6 kbps, any baud rate setting
Baud Rate
Operating Mode
Virtual COM, TCP Server, TCP Client,
UDP, Peer to Peer, AT Command, and
RFC2217 modes
Virtual COM, TCP Server, TCP Client, UDP, Peer to Peer, and AT Command modes
32-bit/64-bit Windows 2000/XP/Vista/7, Windows Server 2003/2008, Windows CE 5.0/6.0, and Linux
Driver
FCC, CE
Certifications
Page
5-2
EKI-1522
1-port RS-232/422/485 to 2-port RS-232/422/485 to
1-port RS-232/422/485 2-port RS-232/422/485
802.11b/g WLAN Serial 802.11b/g WLAN Serial
Serial Device Server
Serial Device Server
Device Server
Device Server
5-6
Serial Device Servers
5-6
5-8
5-8
5-8
5-8
Selection Guide
Programmable Device Servers
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
Panel Computers
Display Solutions
Model Name
EKI-1121L
EKI-1122L
EKI-1126
16-port RISC-based Programmable
Serial Device Server with USB and SD
Product Description
1-port Programmable Device Server
2-port Programmable Device Server
No. of Ethernet Ports
2
2
2
No. of Serial Ports
1
2
16
Ethernet Interface
10/100 Mbps
10/100 Mbps
10/100Mbps
Serial Type
RS-232/422/485
RS-232/422/485
RS-232/422/485
CPU
ARM7
ARM7
IXP430
CPU Speed
80 MHz
80 MHz
400 MHz
Device Servers
Flash
8 MB
8 MB
16 MB
SDRAM
16 MB
16 MB
128 MB
USB
-
-
V
Serial Communication Cards
Video Surveillance
SD Slot
-
-
V
OS
uClinux 2.4
uClinux 2.4
uClinux 2.6
Class I Division 2 Groups ABCD T4, FCC, CE
Certifications
5-13
Page
FCC, CE
5-13
Ethernet Switches
5-14
IPC Chassis
SBCs and Backplanes
Industrial Motherboards
iGateway - GPRS/3G Serial Device Servers
Embedded IPCs
Server-grade IPCs
IPC Peripherals
Model Name
EKI-1321
EKI-1322
Product Description
1-port RS-232/422/485 to
GPRS Serial Device Server
2-port RS-232/422/485 to
GPRS Serial Device Server
EKI-1331
EKI-1332
Cellular Interface
GSM/GPRS
GSM/GPRS
GSM/GPRS/EDGE/UMTS/
HSDPA
GSM/GPRS/EDGE/UMTS/
HSDPA
Band Options
850/900/1800/1900 MHz
850/900/1800/1900 MHz
850/1900/2100 MHz
850/900/1800/1900 MHz
850/1900/2100 MHz
850/900/1800/1900 MHz
No. of Serial Ports
1
2
1
2
1-port RS-232/422/485 to 3G 2-port RS-232/422/485 to 3G
Serial Device Server
Serial Device Server
No. Serial Type
RS-232/422/485, software selectable
Ethernet
10/100/1000 Mbps
Baud Rate
50 bps ~ 921.6 kbps, any baud rate setting
Virtual COM, Reverse Virtual COM, TCP Server, TCP Client, UDP, Peer to Peer, AT Command, SMS Tunnel, and AT
Command modes
Utility
32-bit/64-bit Windows 2000/XP/Vista/7, Windows Server 2003/2008, Web-Browser Console, Telnet Console
Page
FCC, CE
5-10
5-10
online
Online Download www.advantech.com/products
Signal Conditioning
USB DAQ Modules
Operation Mode
Certifications
DAQ Boards
online
Embedded Controllers
PACs
5-3
Serial Device Server
Selection Guide
Modbus Gateways
Model Name
EKI-1221D
EKI-1222D
EKI-1221
EKI-1222
EKI-1224
ADAM-4572
Product Description
1-port Modbus
Gateway with
Integrated
Ethernet
Cascading
2-port Modbus
Gateway with
Integrated
Ethernet
Cascading
1-port Modbus
Gateway
2-port Modbus
Gateway
4-port Modbus
Gateway
1-port Modbus
Gateway
No. of Ethernet Ports
2
2
2
2
2
1
No. of Serial Ports
1
2
1
2
4
1
10/100Mbps
Ethernet Interface
RS-232/422/485, software selectable
Serial Type
Daisy-Chain Connectivity
Ethernet Feature
Dual Ethernet Redundany
-
Windows Configuration Utility, Web-Browser Console
Configuation
Windows Utility
Modbus RTU Master, Modbus RTU Slave, Modbus ASCII Master, and Modbus ASCII Slave modes
Operating Mode
50 bps ~ 921.6 kbps
Baud Rate
Class I Division 2 Groups ABCD T4, FCC, CE
Certifications
5-12
Page
5-12
5-11
FCC, CE
5-11
5-11
online
Serial to USB Converters
Model Name
ADAM-4561
USB-4604B
USB-4604BM
4-port RS-232/422/485 to
USB Converter with ESD
Surge Protection
USB 1.1/2.0
Product Description
1-port Isolated USB to
RS-232/422/485 Converter
1-port Isolated USB to
RS-232 Converter
4-port RS-232 to USB
Converter with ESD Surge
Protection
Interface
USB 1.1
USB 1.1
USB 1.1/2.0
Serial Port
1
1
4
4
Baud Rate
50 ~ 115.2 kbps
75 ~ 115.2 kbps
50 ~ 921.6 kbps
50 ~ 921.6 kbps
RS-232/422/485
RS-232
RS-232
RS-232/422/485
USB
Type B
Type B
Type B
Type B
Serial
Screw Terminal
DB9
DB9
DB9
Isolation
3,000 VDC (RS-232/422/485)
2,500 VDC
-
-
Surge
-
-
2,500 VDC
2,500 VDC
Driver
Windows 2000/XP
Windows 2000/XP
Windows 2000/XP/Vista/7
Windows 2000/XP/Vista/7
Page
online
online
online
online
Serial Type
Connector
Protection
5-4
ADAM-4562
Serial Device Servers
EKI-1521
EKI-1522
EKI-1524
1-port RS-232/422/485 Serial Device Server
2-port RS-232/422/485 Serial Device Server
4-port RS-232/422/485 Serial Device Server
Features
ƒƒ Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy
ƒƒ Provides COM port redirection (Virtual COM), TCP and UDP operation modes
ƒƒ Supports up to 921.6 kbps, and any baud rate setting
ƒƒ Allows a max. of 5 hosts to access one serial port
ƒƒ Allows a max. of 16 hosts to be accessed as TCP client mode
ƒƒ Built-in 15 KV ESD protection for all serial signals
ƒƒ Provides rich configuration methods including Windows utility, Telnet
console, and Web Browser
ƒƒ Supports Windows 2000/XP/Vista/7, Windows CE, and Linux drivers
ƒƒ Automatic RS-485 data flow control
ƒƒ Class I, Division 2 certification
EKI-1521
EKI-1522
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
EKI-1524
Panel Computers
Display Solutions
Ethernet Switches
Device Servers
Serial Communication Cards
RoHS
COMPLIANT
2002/95/EC
Introduction
Video Surveillance
EKI-1521, EKI-1522 and EKI-1524 feature two independent Ethernet ports and MAC addresses to provide a redundant network mechanism to guarantee Ethernet network reliability.
EKI-1521, EKI-1522 and EKI-1524 are serial device servers that connect RS-232/422/485 serial devices, such as PLC, meters, sensors, and barcode reader to an IP-based Ethernet
LAN. They allow nearly any device with serial ports to connect and share an Ethernet network. EKI-1521, EKI-1522 and EKI-1524 provide various operations: COM port redirection
IPC Chassis
(Virtual COMport), TCP Server, TCP Client and UDP mode. With COM port redirection mode, standard serial operation calls are transparently redirected to the EKI-1521, EKI-1522
and EKI-1524, guaranteeing compatibility with legacy serial devices and enabling backward compatibility with existing software. With TCP server, TCP client, and UDP modes, EKI1521, EKI-1522 and EKI-1524 ensure the compatibility of network software that uses a standard network API. Moreover, you can make serial devices communicate with other devices
SBCs and Backplanes
peer-to-peer, without any intermediate host PCs and software programming.
Specifications
Mechanics
ƒƒ Dimensions (W x H x D)EKI-1521/1522: 37 x 140 x 95 mm
EKI-1524: 55 x 140 x 95 mm
ƒƒ Enclosure
Metal with solid mounting hardware
ƒƒ Mounting
DIN-rail, Panel
ƒƒ Weight
EKI-1521: 592g
EKI-1522: 600g
EKI-1524: 668g
Ethernet Communications
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Compatibility
Speed
No. of Ports
Port Connector
Protection
IEEE 802.3, IEEE 802.3u
10/100 Mbps
2
8-pin RJ45
Built-in 1.5 KV magnetic isolation
General
Serial Communications
ƒƒ Port Type
ƒƒ No. of Ports
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Port Connector
Data Bits
Stop Bits
Parity
Flow Control
Baud Rate
Serial Signals
ƒƒ Protection
Software
ƒƒ Driver Support ƒƒ Utility Software
ƒƒ Operation Modes
ƒƒ Configuration
ƒƒ Protocol
ƒƒ Management
ƒƒ LED Indicators
RS-232/422/485, software selectable
EKI-1521: 1
EKI-1522: 2
EKI-1524: 4
DB9 male
5, 6, 7, 8
1, 1.5, 2
None, Odd, Even, Space, Mark
XON/XOFF, RTS/CTS, DTR/DSR
50 bps ~ 921.6 kbps, any baud rate setting
RS-232: TxD, RxD, CTS, RTS, DTR, DSR, DCD, RI, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485: Data+, Data-, GND
Built-in 15 KV ESD for all signals
32-bit/64-bit Windows 2000/XP/Vista/7, Windows
Server 2003/2008, Windows CE 5.0, and Linux
Advantech Serial Device Server Configuration Utility
COM port redirection mode (Virtual COM)
TCP/UDP server (polling) mode
TCP/UDP client (event handling) mode
Pair connection (peer to peer) mode
Windows utility, Telnet console, Web Browser
ICMP, IP, TCP, UDP, BOOTP, DHCP, Auto IP, Telnet,
SNMP, HTTP, DNS, SMTP, ARP, NTP
SNMP MIB-II
ƒƒ Reboot Trigger
System: Power, System Status
LAN: Speed, Link/Active
Serial: Tx, Rx
Built-in WDT (watchdog timer)
Power Requirements
ƒƒ Power Input
ƒƒ Power Connector
ƒƒ Power Consumption
Environment
12 ~ 48 VDC, redundant dual inputs
Terminal block
EKI-1521: 2 W
EKI-1522: 2.5 W
EKI-1524: 4W
ƒƒ Operating Temperature -10 ~ 60° C (14 ~ 140° F)
ƒƒ Storage Temperature -20 ~ 80° C (-4 ~ 176° F)
ƒƒ Operating Humidity
5 ~ 95% RH
Regulatory Approvals
ƒƒ EMC
ƒƒ Safety
ƒƒ MTBF
ƒƒ Hazardous Location
Embedded IPCs
Server-grade IPCs
IPC Peripherals
DAQ Boards
Signal Conditioning
USB DAQ Modules
CE, FCC Part 15 Subpart B (Class A)
UL/cUL 60950-1
EKI-1521: 1,102,913 hrs
EKI-1522: 1,000,154 hrs
EKI-1524: 862,230 hrs
Class I, Division 2
Ordering Information
ƒƒ EKI-1521
ƒƒ EKI-1522
ƒƒ EKI-1524 Industrial Motherboards
Embedded Controllers
PACs
1-port RS-232/422/485 Serial Device Server
2-port RS-232/422/485 Serial Device Server
4-port RS-232/422/485 Serial Device Server
Online Download www.advantech.com/products
5-5
EKI-1528
EKI-1526
8-port RS-232/422/485 Serial Device Server
16-port RS-232/422/485 Serial Device Server
Features
ƒƒ 8 or 16-port RS-232/422/485 serial communication
ƒƒ Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy
ƒƒ Supports up to 921.6 kbps, and any baud rate setting
ƒƒ Provides COM port redirection (Virtual COM), TCP and UDP operation modes
ƒƒ Provides rich configuration methods: Windows utility, Telnet console, Web
Browser, and serial console
ƒƒ Built-in 15 KV ESD protection for all serial signals
ƒƒ SNMP MIB-II for network management
ƒƒ Built-in buzzer for easy location
ƒƒ Standard 1U rackmount size
ƒƒ Rear wiring
ƒƒ Automatic RS-485 data flow control
EKI-1528
EKI-1526
RoHS
COMPLIANT
2002/95/EC
Introduction
EKI-1528 and EKI-1526 are industrial-grade network-based serial device servers for connecting up to 8 or 16 serial RS-232/422/485 devices, such as CNCs, PLCs, scales and
scanners, directly to a TCP/IP network. The EKI-1528 and EKI-1526 feature two independent Ethernet ports and MAC addresses to provide a redundant network mechanism to guarantee
Ethernet network reliability. The EKI-1528 and EKI-1526 provide a simple and cost-effective way to bring the advantages of remote management and data accessibility to thousand of
devices that can't connect to an Ethernet network. The EKI-1528 and EKI-1526 offer rich ways to configure through Windows utility, Web Browser, serial console or Telnet console,
these methods make it easy manage many EKI-1528 and EKI-1526 or serial devices on your network.
Specifications
Ethernet Communications
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Compatibility
Speed
No. of Ports
Port Connector
Protection
IEEE 802.3, IEEE 802.3u
10/100 Mbps, auto MDI/MDIX
2
8-pin RJ45
Built-in 1.5 KV magnetic isolation
Serial Communications
ƒƒ Port Type
ƒƒ No. of Ports
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Port Connector
Data Bits
Stop Bits
Parity
Flow Control
Baud Rate
Serial Signals
ƒƒ Protection
RS-232/422/485, software selectable
EKI-1528: 8
EKI-1526: 16
8-pin RJ45
5, 6, 7, 8
1, 1.5, 2
None, Odd, Even, Space, Mark
XON/XOFF, RTS/CTS, DTR/DSR
50 bps ~ 921.6 kbps, any baud rate setting
RS-232: TxD, RxD, CTS, RTS, DTR, DSR, DCD, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485: Data+, Data-, GND
15 KV ESD for all signals
Software
ƒƒ Driver Support
ƒƒ Utility Software
ƒƒ Operation Modes
ƒƒ Configuration
5-6
32-bit/64-bit Windows 2000/XP/Vista/7, Windows
Server 2003/2008, Windows CE 5.0, and Linux
Advantech Serial Device Server Configuration Utility
COM port redirection mode (Virtual COM)
TCP/UDP server (polling) mode
TCP/UDP client (event handling) mode
Pair connection (peer to peer) mode
RFC2217 mode
Windows utility, Telnet console, Web Browser, serial
console
Serial Device Servers
ƒƒ Protocols
ƒƒ Management
ICMP, IP, TCP, UDP, BOOTP, DHCP, Auto IP, Telnet,
SNMP, HTTP, DNS, SMTP, ARP, HTTPS, SSL, SSH,
NTP
SNMP MIB-II
Mechanics
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Dimensions (H x W x D)44 x 440 x 220 mm
Enclosure
SECC chassis
Mounting
Rack
Weight
EKI-1528: 2.53 kg
EKI-1526: 2.58 kg
General
ƒƒ LED Indicators
ƒƒ Alert Tools
ƒƒ Reboot Trigger
System: Power, System Status
LAN: Speed, Link/Active
Serial: Tx, Rx
Built-in buzzer and RTC (real time clock)
Built-in WDT and push button for hardware reboot
Power Requirements
ƒƒ Power Input
ƒƒ Power Consumption
100 ~ 240 VAC, 47 ~ 63 Hz
EKI-1528: 8 W
EKI-1526: 10 W
Environment
ƒƒ Operating Temperature -10 ~ 60° C (14 ~ 140° F)
ƒƒ Storage Temperature -20 ~ 80° C (-4 ~ 176° F)
ƒƒ Operating Humidity
5 ~ 95% RH
Regulatory Approvals
ƒƒ EMC
ƒƒ MTBF
CE, FCC Part 15 Subpart B (Class A)
EKI-1528: 198,571 hrs
EKI-1526: 175,708 hrs
EKI-1528
EKI-1526
Dimensions
Unit: mm
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
Panel Computers
Display Solutions
480
440
5.65
9
220
225.80
Device Servers
15 14.5
20 20
6-M3x0.5Px2L
2.80
6
Ø6
6
32
44
Ethernet Switches
Serial Communication Cards
Video Surveillance
IPC Chassis
SBCs and Backplanes
Dimensions (W x D x H): 440 x 220 x 44 mm
Industrial Motherboards
Physical Views
Ordering Information
EKI-1528: Front View
ƒƒ EKI-1528
ƒƒ EKI-1526
8-port RS-232/422/485 Serial Device Server
16-port RS-232/422/485 Serial Device Server
*All items include 1pc OPT1J
Server-grade IPCs
Accessories
EKI-1528: Rear View
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
OPT1I
OPT1J
1702002600
1702002605
1702031801
1702031836
Embedded IPCs
1 m RJ45 to DB9 Male Cable
30 cm RJ45 to DB9 Male Cable
Power Cable US Plug 1.8m
Power Cable EU Plug 1.8m
Power Cable UK Plug 1.8m
Power Cable China/Australia Plug 1.8m
IPC Peripherals
DAQ Boards
Signal Conditioning
EKI-1526: Front View
USB DAQ Modules
Embedded Controllers
EKI-1526: Rear View
PACs
Online Download www.advantech.com/products
5-7
ADAM-4571/L
ADAM-4570/L
1-port RS-232/422/485 Serial
Device Server
2-port RS-232/422/485 Serial
Device Server
Features
RoHS
RoHS
2002/95/EC
2002/95/EC
COMPLIANT
COMPLIANT
Specifications
Ethernet Communications
Mechanics
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Compatibility
Speed
No. of Ports
Port Connector
Protection
IEEE 802.3, IEEE 802.3u
10/100 Mbps
1
8-pin RJ-45
Built-in 1.5 KV magnetic isolation
ƒƒ No. of Ports
ƒƒ Port Connector
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Data Bits
Stop Bits
Parity
Flow Control
Baud Rate
Serial Signals
ƒƒ Protection
ADAM-4571/4570: RS-232/422/485, software selectable
ADAM-4571L/4570L: RS-232
ADAM-4571/4571L: 1
ADAM-4570/4570L: 2
ADAM-4571/4571L: DB9 male
ADAM-4570/4570L: 10-pin RJ48
5, 6, 7, 8
1, 1.5, 2
None, Odd, Even, Space, Mark
XON/XOFF, RST/CTS, DTR/DSR
50 bps ~ 921.6 kbps, any baud rate setting
RS-232: TxD, RxD, CTS, RTS, DTR, DSR, DCD, RI, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485: Data+, Data-, GND
15 KV ESD protection for all signals
ƒƒ Utility Software
ƒƒ Operation Modes
ƒƒ Configuration
ƒƒ Protocol
ƒƒ LED Indicators
ƒƒ Reboot Trigger
Power Requirements
ƒƒ Power Input
ƒƒ Power Connector
ƒƒ Power Consumption
10 ~ 30 VDC
Terminal block
ADAM-4571/4571L: 1.5 W
ADAM-4570/4570L: 2 W
Environment
ƒƒ Operating Temperature -10 ~ 60° C (14 ~ 140° F)
ƒƒ Storage Temperature -20 ~ 80° C (-4 ~ 176° F)
ƒƒ Operating Humidity
5 to 95% RH
32-bit/64-bit Windows 2000/XP/Vista/7, Windows
Server 2003/2008, Windows CE 5.0, and Linux
Advantech Serial Device Server Configuration Utility
COM port redirection (Virtual COM)
TCP/UDP server (polling) mode
TCP/UDP client (event handling) mode
Pair Connection (peer to peer) mode
Windows utility, Telnet console, Web Browser
ICMP, IP, TCP, UDP, BOOTP, DHCP, Auto IP, Telnet,
SNMP, HTTP, DNS, SMTP, ARP
ƒƒ EMC
Serial Device Servers
CE, FCC Part 15 Subpart B (Class A)
Ordering Information
ƒƒ ADAM-4571
1-port RS-232/422/485 Serial Device Server
ƒƒ ADAM-4571L
1-port RS-232 Serial Device Server
ƒƒ ADAM-4570
2-port RS-232/422/485 Serial Device Server
ƒƒ ADAM-4570L
2-port RS-232 Serial Device Server
*ADAM-4570/4570L includes 2pcs OPT1A
Accessories
ƒƒ OPT1A
ƒƒ OPT1D
5-8
System: Power, System Status
LAN: Speed, Link/Active
Serial: Tx, Rx
Built-in WDT (watchdog timer)
Regulatory Approvals
Software
ƒƒ Driver Support
70 x 130 x 30 mm
ABS+PC with solid mounting hardware
DIN-rail, stack, wall
ADAM-4571/4571L: 135g
ADAM-4570/4570L: 160g
General
Serial Communications
ƒƒ Port Type
Dimension (H x W x D)
Enclosure
Mountion
Weight
1 m RJ48 to DB9 Male Cable
30 cm RJ48 to DB9 Male Cable
EKI-1351
EKI-1352
1-port RS-232/422/485 to 802.11b/g WLAN
Serial Device Server
2-port RS-232/422/485 to 802.11b/g WLAN
Serial Device Server
Features
ƒƒ Link any serial device to an IEEE 802.11 b/g network
ƒƒ Supports wireless LAN Ad-Hoc and Infrastructure modes
ƒƒ Provides COM port redirection, TCP, UDP, and pair connection modes
ƒƒ Supports up to 921.6 kbps, and any baud rate setting
ƒƒ Provides Web-based configuration and Windows utility
ƒƒ Allows a max. of 5 hosts to access one serial port
ƒƒ Supports Windows 2000/XP/Vista/7, Windows CE, and Linux drivers
ƒƒ Allows a max. of 4 hosts to be accessed as TCP client mode
ƒƒ Built-in 15 KV ESD protection for all serial signals
ƒƒ Supports DHCP protocol
ƒƒ Supports secure access with WEP, WPA, WPA2
EKI-1351
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
EKI-1352
Panel Computers
Display Solutions
Ethernet Switches
Device Servers
Serial Communication Cards
RoHS
COMPLIANT
2002/95/EC
Introduction
EKI-1351 and EKI-1352 are wireless serial device servers that bring RS-232/422/485 to wireless Ethernet. They allow nearly any device with serial ports to connect and share an
Wireless Ethernet network. EKI-1351 and EKI-1352 provide a quick, simple and cost-effective way to bring the advantages of remote management and data accessibility to thousands
of devices that cannot connect to a network.
Video Surveillance
IPC Chassis
With EKI-1351 and EKI-1352, your existing serial devices can be used with the most popular operating systems on the market. There is no need to write special drivers for specific
operating systems. Moreover, you can make serial devices communicate with other devices peer-to-peer, without any intermediate host PCs and software programming. That saves a
lot of cost and effort. In addition, you can actively request data or issue commands from the RS-232/422/485 side or Wireless Ethernet side. This data can be sent bilaterally. Thus,
SBCs and Backplanes
the EKI-1351 and EKI-1352 are especially suitable for remote monitoring environments such as security systems, factory automaton, SCADA, transportation and more.
Specifications
Mechanics
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Ethernet Communications
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Compatibility
Speed
Network Mode
Antenna Connector
Free Space Range
Wireless Security
IEEE 802.11b, IEEE 802.11g
11/54 Mbps
Infrastructure, Ad-Hoc
Reverse SMA
Open space 100m
WEP, WPA, WPA2
General
ƒƒ LED Indicators
Serial Communications
ƒƒ Port Type
ƒƒ No. of Ports
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Port Connector
Data Bits
Stop Bits
Parity
Baud Rate
Serial Signals
ƒƒ Protection
RS-232/422/485, software selectable
EKI-1351: 1
EKI-1352: 2
DB9 male
5, 6, 7, 8
1, 1.5, 2
None, Odd, Even, Space, Mark
50 bps ~ 921.6 kbps, any baud rate setting
RS-232: TxD, RxD, CTS, RTS, DTR, DSR, DCD, RI, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485: Data+, Data-, GND
15 KV ESD for all signals
ƒƒ Utility Software
ƒƒ Operation Modes
ƒƒ Reboot Trigger
System: Power, System Status
WLAN: Quality, Fail, Link/Active
Serial: Tx, Rx
Built-in WDT (watchdog timer)
Power Requirements
ƒƒ Power Input
ƒƒ Power Connector
ƒƒ Power Consumption
12 ~ 48 VDC, redundant dual inputs
Terminal block
EKI-1351: 3.5 W
EKI-1352: 4 W
32-bit/64-bit Windows 2000/XP/Vista/7, Windows
Server 2003/2008, Windows CE 5.0, and Linux
Advantech Serial Device Server Configuration Utility
COM port redirection mode (Virtual COM)
TCP/UDP server (polling) mode
TCP/UDP client (event handling) mode
Pair connection without AP (peer to peer) mode
ƒƒ Operating Temperature 0 ~ 50° C (32 ~ 122° F)
ƒƒ Storage Temperature -20 ~ 80° C (-4 ~ 176° F)
ƒƒ Operating Humidity
5 ~ 95% RH
ƒƒ EMC
ƒƒ Safety
ƒƒ Hazardous Location
CE, FCC Part 15 Subpart B (Class B)
UL/cUL 60950-1
Class I, Division 2
Ordering Information
ƒƒ EKI-1351
ƒƒ EKI-1352
Industrial Motherboards
Embedded IPCs
Server-grade IPCs
IPC Peripherals
DAQ Boards
Signal Conditioning
Environment
Regulatory Approvals
Software
ƒƒ Driver Support Dimensions (W x H x D)37 x 140 x 95 mm
Enclosure
Metal with solid mounting hardware
Mounting
DIN-rail, Panel
Weight
EKI-1351: 595g
EKI-1352: 603g
USB DAQ Modules
Embedded Controllers
PACs
1-port 802.11b/g WLAN Serial Device Server
2-port 802.11b/g WLAN Serial Device Server
Online Download www.advantech.com/products
5-9
EKI-1321
EKI-1322
1-port RS-232/422/485 to GPRS
Serial Device Server
2-port RS-232/422/485 to GPRS
Serial Device Server
Features
NEW
ƒƒ Supports Universal quad-band GSM/GPRS 850/900/1800/1900 MHz
ƒƒ Supports dual SIM for telecom redundancy
ƒƒ Supports COM port redirection, TCP, UDP, SMS tunnel, and pair connection
modes
ƒƒ Supports any baud rate setting
ƒƒ Provides Windows utility, Telnet, and Web console
ƒƒ Supports 32-bit/64-bit Windows 2000/XP/Vista/7, Windows CE, and Linux
drivers
EKI-1321
EKI-1322
RoHS
COMPLIANT
2002/95/EC
Introduction
EKI-1321 and EKI-1322 are cellular Serial Device Servers that can transparently bring RS-232/422/485 devices to a cellular network. They allow nearly any device with serial ports to
connect and share a cellular network with easy configuration. EKI-1321 and EKI-1322 GPRS Serial Device Servers are compact, and can be used on DIN-rail or wall mount and with
both front panel and side panel LED display. They come with a DC power input 10 to 50 VDC and have EFT/Surge protection to prevent damaged from various type of power resources.
EKI-1321 and EKI-1322 are suitable for remote monitoring environments such as solar power fund, factory automation, transportation and more.
Specifications
Software
ƒƒ Driver Support LAN Interface
ƒƒ Ethernet
ƒƒ Connector
ƒƒ Protection
10/100/1000 Mbps, auto MDI/MDIX
RJ45
1.5 kV built-in magnetic isolation protection
ƒƒ Utility Software
ƒƒ Operation Modes
Cellular Interface
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Standards
GSM/GPRS
Band Option
Quad-band 850/900 and 1800/1900 MHz
GPRS Multi-Slot
Class 10
GPRS Terminal Device Class B
GPRS Coding Schemes CS1 to CS4
Tx Power
1W for GSM 1800/1900, 2W for EGSM 850/900
Number of SIM
2
SIM Control
3V
Serial Communications
ƒƒ Port Type
ƒƒ No. of Ports
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Port Connector
Data Bits
Stop Bits
Parity
Baud Rate
Serial Signals
ƒƒ Protection
RS-232/422/485, software selectable
EKI-1321: 1
EKI-1322: 2
DB9 male
5, 6, 7, 8
1, 1.5, 2
None, Odd, Even, Space, Mark
50 bps ~ 921.6 kbps, any baud rate setting
RS-232: TxD, RxD, CTS, RTS, DTR, DSR, DCD, RI, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485: Data+, Data-, GND
15 KV ESD for all signals
General
ƒƒ LED Indicators
ƒƒ Reboot Trigger
5-10
System: Power, System Status
GPRS: Quality, GPRS ready
Serial: Tx, Rx
Built-in WDT (watchdog timer)
Serial Device Servers
32-bit/64-bit Windows 2000/XP/Vista/7, Windows
Server 2003/2008, Linux
Advantech Serial Device Server Configuration Utility
COM port redirection mode (Virtual COM)
TCP/UDP server (polling) mode
TCP/UDP client (event handling) mode
Pair connection without AP (peer to peer) mode
Mechanics
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Dimensions (W x H x D)27 x 120 x 85 mm
Enclosure
Metal with solid mounting hardware
Mounting
DIN-rail, Panel
Weight
EKI-1321: 490g
EKI-1322: 500g
Power Requirements
ƒƒ Power Input
ƒƒ Power Connector
ƒƒ Power Consumption
10 ~ 50 VDC, redundant dual inputs
Terminal block
EKI-1321: 6 W
EKI-1322: 6.5 W
Environment
ƒƒ Operating Temperature -30 ~ 65° C (-22 ~ 149° F)
ƒƒ Storage Temperature -40 ~ 75° C (-40 ~ 167° F)
ƒƒ Operating Humidity
5 ~ 95% RH
Regulatory Approvals
ƒƒ EMC
ƒƒ RF
CE: EN55022/EN55024, Class A
FCC: FCC part 15 subpart B, Class A
FCC Part22H/Part24E, EN301 489-1/-7, EN301 511
Ordering Information
ƒƒ EKI-1321 ƒƒ EKI-1322 1-port GPRS Serial Device Server
2-port GPRS Serial Device Server
EKI-1221
EKI-1222
EKI-1224
1-port Modbus Gateway
2-port Modbus Gateway
4-port Modbus Gateway
Features
ƒƒ Provides 2 x 10/100 Mbps Ethernet ports for LAN redundancy
ƒƒ Integration of Modbus TCP and Modbus RTU/ASCII networks
ƒƒ Supports up to 921.6 kbps, and any baud rate setting
ƒƒ Supports up to 16 connections and 32 requests simultaneously
ƒƒ Supports 31 slaves per serial port
ƒƒ Easy-managing Advantech Serial Device Server Configuration Utility for
Windows 2000/XP/Vista/7
ƒƒ Auto searching slave ID over configuration utility
ƒƒ Software selectable RS-232/422/485 communication
ƒƒ Mounts on DIN-rail, wall or panel
ƒƒ Built-in 15 KV ESD protection for all serial signals
ƒƒ Automatic RS-485 data flow control
EKI-1221
EKI-1222
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
EKI-1224
Panel Computers
Display Solutions
Ethernet Switches
Device Servers
Serial Communication Cards
RoHS
COMPLIANT
2002/95/EC
Introduction
Video Surveillance
The EKI-1200 series Modbus gateways are bi-directional gateways for integrating new and existing Modbus/RTU and Modbus/ASCII serial devices to newer TCP/IP networked-based
devices. The EKI-1221/1222/1224 feature two independent Ethernet ports and MAC addresses to provide a redundant networking mechanism to guarantee Ethernet networking
reliability. They provide a simple and cost-effective way to bring the advantage of remote management and data accessibility to thousand of devices that can not connect to a network.
IPC Chassis
The EKI-1221/1222/1224 provide a feature that can allow users to select master or slave operation mode for each serial port. They not only allow an Ethernet master to control serial
slaves, but also allow serial masters to control Ethernet slaves.
SBCs and Backplanes
Specifications
Ethernet Communications
Mechanics
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ Dimensions (W x H x D)EKI-1221/1222: 37 x 140 x 95 mm
EKI-1224: 55 x 140 x 95 mm
ƒƒ Enclosure
Metal with solid mounting hardware
ƒƒ Mounting
DIN-rail, Panel
ƒƒ Weight
EKI-1221: 592g
EKI-1222: 600g
EKI-1224: 668g
Compatibility
Speed
No. of Ports
Port Connector
Protection
IEEE 802.3, IEEE 802.3u
10/100 Mbps
2
8-pin RJ45
Built-in 1.5 KV magnetic isolation
Serial Communications
ƒƒ Port Type
ƒƒ No. of Ports
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Port Connector Data Bits
Stop Bits
Parity
Flow Control
Baud Rate
Serial Signals
ƒƒ Protection
RS-232/422/485, software selectable
EKI-1221: 1
EKI-1222: 2
EKI-1224: 4
DB9 male
7, 8
1, 2
None, Odd, Even, Space, Mark
XON/XOFF, RTS/CTS, DTR/DSR
50 bps ~ 921.6 kbps, any baud rate setting
RS-232: TxD, RxD, CTS, RTS, DTR, DSR, DCD, RI, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485: Data+, Data-, GND
15 KV ESD for all signals
Software
ƒƒ OS Support ƒƒ Utility Software
ƒƒ Operation Modes
32-bit/64-bit Windows 2000/XP/Vista/7 and Windows
Server 2003/2008
Advantech Serial Device Server Configuration Utility
Modbus RTU Master/Slave mode
Modbus ASCII Master/Slave mode
General
ƒƒ LED Indicators
ƒƒ Reboot Trigger
System: Power, System Status
LAN: Speed, Link/Active
Serial: Tx, Rx
Built-in WDT (watchdog timer)
Power Requirements
ƒƒ Power Input
ƒƒ Power Connector ƒƒ Power Consumption
12 ~ 48 VDC, redundant dual inputs
Terminal block
EKI-1221: 2 W
EKI-1222: 2.5 W
EKI-1224: 4 W
Environment
ƒƒ Operating Temperature -10 ~ 60° C (14 ~ 140° F)
ƒƒ Storage Temperature -20 ~ 80° C (-4 ~ 176° F)
ƒƒ Operating Humidity
5 ~ 95% RH
Regulatory Approvals
ƒƒ EMC
ƒƒ Safety
ƒƒ Hazardous Location
CE, FCC Part 15 Subpart B (Class A)
UL/cUL 60950-1
Class I, Division 2
Ordering Information
ƒƒ EKI-1221
ƒƒ EKI-1222
ƒƒ EKI-1224
1-port Modbus Gateway
2-port Modbus Gateway
4-port Modbus Gateway
Online Download www.advantech.com/products
Industrial Motherboards
Embedded IPCs
Server-grade IPCs
IPC Peripherals
DAQ Boards
Signal Conditioning
USB DAQ Modules
Embedded Controllers
PACs
5-11
EKI-1221D
EKI-1222D
1-port Modbus Gateway with
Integrated Ethernet Cascading
2-port Modbus Gateway with
Integrated Ethernet Cascading
Features
NEW
ƒƒ Provides 2 x 10/100 Mbps Ethernet ports for Daisy Chian connectivity
ƒƒ Integration of Modbus TCP and Modbus RTU/ASCII networks
ƒƒ Supports Ethernet auto-bypass function
ƒƒ Master mode supports 32 TCP slaves at the same time
ƒƒ Slave mode supports up to 16 TCP masters
ƒƒ Supports mapping Modbus slave ID option
ƒƒ Auto searching Modbus slave ID over configuration utility
ƒƒ Mounts on DIN-rail, wall or panel
ƒƒ Class I, Division 2 certification
RoHS
COMPLIANT
2002/95/EC
Introduction
The EKI-1200 series Modbus gateways are bi-directional gateways for integrating new and existing Modbus/RTU and Modbus/ASCII serial devices to newer TCP/IP networked-based
devices. The EKI-1221D/1222D feature two Ethernet ports with one IP address for easier network wiring. One port can be used to connect to the network, and the other port can be used
to connect to another Ethernet device or another EKI-1221D/1222D. They provide a simple and cost-effective way to bring the advantage of remote management and data accessibility
to thousand of devices that can not connect to a network. The EKI-1221D/1222D provide a feature that can allow users to select master or slave operation mode for each serial port.
They not only allow an Ethernet master to control serial slaves, but also allow serial masters to control Ethernet slaves.
Specifications
Ethernet Communications
Mechanics
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Compatibility
Speed
No. of Ports
Port Connector
Protection
IEEE 802.3, IEEE 802.3u
10/100 Mbps
2
8-pin RJ45
Built-in 1.5 KV magnetic isolation
Serial Communications
ƒƒ Port Type
ƒƒ No. of Ports
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Port Connector Data Bits
Stop Bits
Parity
Flow Control
Baud Rate
Serial Signals
ƒƒ Protection
Power Requirements
RS-232/422/485, software selectable
EKI-1221D: 1
EKI-1222D: 2
DB9 male
7, 8
1, 2
None, Odd, Even, Space, Mark
XON/XOFF, RTS/CTS, DTR/DSR
50 bps ~ 921.6 kbps, any baud rate setting
RS-232: TxD, RxD, CTS, RTS, DTR, DSR, DCD, RI, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485: Data+, Data-, GND
15 KV ESD for all signals
ƒƒ Utility Software
ƒƒ Operation Modes
32-bit/64-bit Windows 2000/XP/Vista/7 and Windows
Server 2003/2008 (x86 and x64)
Advantech Serial Device Server Configuration Utility
Modbus RTU Master/Slave mode
Modbus ASCII Master/Slave mode
General
ƒƒ LED Indicators
ƒƒ Reboot Trigger
5-12
ƒƒ Power Input
ƒƒ Power Connector ƒƒ Power Consumption
System: Power, System Status
LAN: Speed, Link/Active
Serial: Tx, Rx
Built-in WDT (watchdog timer)
Serial Device Servers
12 ~ 48 VDC, redundant dual inputs
Terminal block
EKI-1221D: 2 W
EKI-1222D: 2.5 W
Environment
ƒƒ Operating Temperature -10 ~ 60° C (14 ~ 140° F)
ƒƒ Storage Temperature -20 ~ 80° C (-4 ~ 176° F)
ƒƒ Operating Humidity
5 ~ 95% RH
Regulatory Approvals
ƒƒ EMC
ƒƒ Hazardous Location
Software
ƒƒ OS Support Dimensions (W x H x D)37 x 140 x 95 mm
Enclosure
Metal with solid mounting hardware
Mounting
DIN-rail, Panel
Weight
EKI-1221D: 580g
EKI-1222D: 588g
EN 55022, EN 55011, EN 61000-6-4, IEC 61000-42/3/4/5/6/8, FCC 47 CFR Part 15 Subpart B (Class A)
Class I, Division 2
Ordering Information
ƒƒ EKI-1221D 1-port Modbus Gateway with Ethernet Cascading
ƒƒ EKI-1222D 2-port Modbus Gateway with Ethernet Cascading
* All items include 1 pc OPT1-DB9
EKI-1121L
EKI-1122L
1-port Programmable Device Server
2-port Programmable Device Server
Features
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Operator Panels
ƒƒ ARM7 32-bit 80MHz processor
ƒƒ 8MB Flash ROM on board
ƒƒ 16MB SDRAM
ƒƒ 2 x 10/100 Mbps Ethernet ports for LAN redundancy
ƒƒ 1 or 2 software selectable RS-232/422/485 serial ports
ƒƒ 50 bps to 921.6 kbps baud rate
ƒƒ Built-in real-time clock (RTC)
ƒƒ Class I, Division 2 certification
ƒƒ Pre-installed Linux Kernel 2.4 platform
Panel Computers
Display Solutions
Ethernet Switches
Device Servers
EKI-1121L
EKI-1122L
Serial Communication Cards
RoHS
COMPLIANT
2002/95/EC
Introduction
EKI-1121L and EKI-1122L are RISC-based embedded communication controllers which provide dual auto-sensing 10/100 Mbps Ethernet ports for network redundancy and one or
two software-selectable RS-232/422/485 serial ports. The EKI-1121L and EKI-1122L use the ARM7 RISC CPU which is a powerful computing engine to fulfill data compression or
protocol conversion requirements. The built-in 8 MB flash ROM and 16 MB SDRAM provide user enough storage to run their specific applications.
Specifications
CPU
Flash
SDRAM
OS (pre-installed)
Console Port
Other
Mechanics
ARM7 32-bit RISC CPU, 80 MHz
8 MB
16 MB
uClinux
RS-232, 3-wire (Tx, Rx, GND) pin-header
RTC, watchdog timer
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ Input Voltage
ƒƒ Power Consumption
2 x auto-sensing 10/100 Mbps ports
RJ-45
1.5 kV magnetic isolation protection
ƒƒ Kernel Version
ƒƒ Protocol Stack
Software selectable RS-232/422/485 ports
D-sub 9 male
15 kV ESD protection for all signals
Serial Parameters
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Data Bits
Stop Bits
Parity
Flow Control
ƒƒ Baud Rate 5, 6, 7, 8
1, 1.5, 2
None, Even, Odd, Space, Mark
RTS/CTS, XON/XOFF, automatic RS-485 data flow
control
50 bps to 921.6 kbps
Serial Signals
ƒƒ RS-232
ƒƒ RS-422
ƒƒ RS-485
TxD, RxD, DTR, DSR, RTS, CTS, DCD, RI, GND
TxD+, TxD-, RxD+, RxD-, GND
Data+, Data-, GND
LEDs
ƒƒ System
ƒƒ LAN
ƒƒ Serial
OS ready, power 1 and power 2 ready
Speed (10/100 Mbps), link/active (on connector)
TxD, RxD
37 x 140 x 95 mm (W x H x D)
Metal
600g
DIN-rail, Panel
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
File System
System Utility
Daemon
Linux Tool Chain
uClibc
Industrial Motherboards
Embedded IPCs
12 ~ 48 VDC, redundant dual inputs
2.5 W
Server-grade IPCs
Software (uClinux)
Serial Interface
ƒƒ Serial Standards
ƒƒ Connectors
ƒƒ Protection
Dimensions
Housing
Weight
Mounting
Power Requirements
Ethernet Interface
ƒƒ LAN
ƒƒ Connector
ƒƒ Protection
IPC Chassis
SBCs and Backplanes
System
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
Video Surveillance
2.4.31
TCP, UDP, IPv4, ICMP, ARP, SNMP V1, HTTP, DHCP,
NTP, NFS, SMTP, Telnet, FTP, PPP, PPPoE
ROMFS/JFFS2
busybox, telnet, ftp, sash, tftp
pppd, snmpd, telnetd, inted, ftpd, boa
Arm-elf-gcc: C/C++ PC Cross Compiler
POSIX Standard Library
IPC Peripherals
DAQ Boards
Environmental Limits
Signal Conditioning
ƒƒ Operating Temperature -10 ~ 60° C (14 ~ 140° F)
ƒƒ Storage Temperature -20 ~ 80° C (-4 ~ 176° F)
ƒƒ Operating Humidity
5 ~ 95 % RH
USB DAQ Modules
Regulatory Approvals
ƒƒ EMC
ƒƒ Hazardous Location
CE, FCC Part 15 Subpart B (Class A)
Class I, Division 2
Ordering Information
ƒƒ EKI-1121L
ƒƒ EKI-1122L
1-port Programmable Device Server
2-port Programmable Device Server
Online Download www.advantech.com/products
Embedded Controllers
PACs
5-13
EKI-1126
16-port RISC-based Programmable Serial
Device Server with USB and SD
Features
NEW
ƒƒ Intel® XScale IXP430 400 MHz processor
ƒƒ 128 MB DDR2 RAM and 16 MB Flash ROM onboard
ƒƒ USB and SD slot for storage expansion
ƒƒ 2 x 10/100 Mbps Ethernet ports
ƒƒ 16 x software selectable RS-232/422/485
ƒƒ Linux ready solution
ƒƒ 1U standard 19-inch rackmount installation
RoHS
COMPLIANT
2002/95/EC
Introduction
EKI-1126 is a RISC-based embedded communication controller which provides dual auto-sensing 10/100 Mbps Ethernet ports for network redundancy, 16 software selectable
RS-232/422/485 serial ports. The EKI-1126 uses the XScale RISC CPU which is a powerful computing engine to fulfill data compression or protocol conversion requirements. The
built-in 16 MB NOR flash ROM and 128 MB DDRII DRAM provide users enough storage to run their specific applications.
Specifications
System
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
CPU Flash SDRAM OS (pre-installed)
Console Port Other Button USB Storage Expansion LEDs
Intel XScale IXP430, 400 MHz
16 MB
128 MB
ARM Linux 2.6
RS-232 (Tx, Rx, GND), RJ45 (115200, n, 8, 1)
RTC, buzzer, watchdog timer
Hardware reset, software programmable button
USB 2.0 full speed (OHCI)
SD socket
ƒƒ Serial Standards ƒƒ Connectors ƒƒ Protection Data Bits Stop Bits Parity Flow Control ƒƒ Baud Rate
16 x RS-232/422/485
RJ-45
15 kV ESD protection for all signals
Regulatory Approvals
ƒƒ Operating Temperature -10 ~ 60° C (14 ~ 140° F)
ƒƒ Storage Temperature -20 ~ 75° C (-4 ~ 167° F)
ƒƒ Operating Humidity 5 ~ 95 % RH
ƒƒ EMC TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
TxD+, TxD-, RxD+, RxD-, GND
Data+, Data-, GND
ƒƒ Kernel Version ƒƒ Protocol Stack ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ
File System System Utility
Daemon Linux Tool Chain uClibc CE, FCC Part 15 Subpart B (Class A)
Serial Device Servers
2.6.16 with pre-emptive patch
TCP, UDP, IPv4, ICMP, ARP, SNMP v1/v2c, HTTP,
DHCP,
NTP, NFS, SMTP, Telnet, FTP, PPP, PPPoE
ROMFS/JFFS2
busybox, telnet, ftp, sash, tftp
pppd, snmpd, telnetd, inetd, ftpd, boa
Arm-elf-gcc: C/C++ PC Cross Compiler
POSIX Standard Library
Ordering Information
ƒƒ EKI-1126 5-14
100 ~240 VAC/VDC
15 W
Software
5, 6, 7, 8
1, 1.5, 2
None, Even, Odd, Space, Mark
RTS/CTS, XON/XOFF, automatic RS-485 data flow
control
50 bps to 921.6 kbps
Serial Signals
ƒƒ RS-232
ƒƒ RS-422
ƒƒ RS-485
44 x 440 x 220 mm (H x W x D)
SECC chassis
Rack
Power Requirements
Environment
Serial Parameters
ƒƒ
ƒƒ
ƒƒ
ƒƒ
ƒƒ Dimensions ƒƒ Housing ƒƒ Mounting 2 x auto-sensing 10/100 Mbps ports
RJ-45
1.5 kV magnetic isolation protection
Serial Interface
OS ready, power 1 and power 2 ready
Speed (10/100 Mbps), link/active (on connector)
TxD, RxD
Mechanics
ƒƒ Input Voltage ƒƒ Power Consumption Ethernet Interface
ƒƒ LAN ƒƒ Connector ƒƒ Protection
ƒƒ System ƒƒ LAN ƒƒ Serial
16-port Programmable Serial Device Server