Samsung UN55F7050 User manual

QUICK START
GUIDE
Welcome to your new Smart TV!
The following instructions cover assembling, connecting, and setting up your new TV. Make
sure you have the accessories listed below.
Included in this box
Remote Control
BN68-05041A-02
Attach the TV to
the Stand
Step
Connect video
devices
Step
1
2
Insert the
batteries into the
remote control
Step
3
Power on and
start the initial
setup
Step
Stand Parts and Cables
Smart Touch Control
Power cord
x4
4
Batteries (AAA x 2)
Warning: Screens can be damaged
from direct pressure when handled
incorrectly. We recommend lifting the
TV by the edges, as shown.
Step 1
Stand Mount
IR extender
Wall mount adapter
Also included: User manual, regulatory guide, 3D Active Glasses,
wireless keyboard
Attach the TV to the Stand
Lay the TV on a soft surface, screen side down.
Use the packing material to protect the screen.
1A
Put a base and screws off to assemble the
stand out of the box.
1B
x8
Base
Screws
REQUIRED TOOLS: a Phillips head screwdriver and a soft, flat surface larger than the TV
(such as the box).
Fit the stand and mount together, making sure
the notch on the mount aligns with the stand.
1C
1D
Insert 4 screws and secure the stand to the
mount.
40 - 55 inches models:
x4 (M4 X L12)
60 inches and above models:
x4 (M4 X L10)
1E
Holding the stand parallel to the screen, slide
the stand into the notches on the back of the
TV.
1F
Insert 4 screws and secure the stand to the TV.
40 - 55 inches models:
x4 (M4 X L12)
60 inches and above models:
x4 (M4 X L10)
1
2
[UF7050_QSG]BN68-05041A-02ENG.indb 2
3
2013-07-29 �� 5:15:13
Step 2
Connect video devices
We recommend using high speed HDMI connections whenever possible for the best picture quality.
✎✎ Please check the shape of the plugs to avoid inserting them upside down.
✎✎ The appearance of your TV may differ from the images below, depending on the model.
Power Input
Plug in after you have made all other connections.
USB Connections
Wired Ethernet
You can connect USB storage devices
to the USB ports and enjoy personal
photos, videos, and music.
USB
(5V 0.5A)
USB
(HDD 5V 1A)
Good Connection : Component and AV
Best Connection : HDMI
USB
(TV CAMERA)
HDMI Cable
We suggest using HDMI whenever
possible.
HDMI IN 3
COMPONENT
/ AV IN
HDMI IN 4
(DVI)
LAN
HDMI Port
Use the other ports for Blu-ray players,
game consoles, and other devices.
VIDEO
HDMI 1 is the default port for a cable
or satellite set-top box.
HDMI IN 2
(ARC)
Match the colors on your device's cables to the colors
on the ports. Connect the yellow composite video out
connector from an AV device to the green AV IN port.
IR OUT
DIGITAL
AUDIO OUT
(OPTICAL)
AV also accepts component video
connections (red/green/blue).
+
HDMI IN 1
(STB)
AUDIO OUT
EX-LINK
AUDIO
ANT IN
AIR/CABLE
You can connect home theater systems to the
OPTICAL or AUDIO OUT ports.
Connect the cable from the antenna
or cable TV outlet.
or
Connect the IR extender to the IR Out
port to control external devices connected to the TV using the Smart Touch Control. For more detailed information, refer
to the "Universal Remote Control Setup"
section in the User manual.
Step 3
Using the Smart Touch Control
Step 4
Power on and start the initial setup
Information required:
Insert the batteries into the Smart Touch Control
• Wi-Fi network password (if you use one)
• Zip code
• Cable or satellite provider info
Insert the tip of a credit card or similar item into the notch on the side of the Smart Touch Control,
and then twist the card to open and remove the remote's back cover.
Plug in the TV. Press the power button on the remote to turn on the TV and start the initial set-up.
✎✎ The TV must be connected to the Internet to use the Smart Features. If you have a wireless
network, confirm that your network router is working before you start the initial setup. If you
have a wired network, connect the TV to the network with a CAT 7 cable before you begin.
Troubleshooting
✎✎ The notch’s location may vary depending on the type of Smart Touch Control provided.
Using the touch pad
navigation
The stand is wobbly or crooked
selection
scrolling
Make sure the arrows on the stand are properly aligned.
The TV won’t turn on
Make sure all cables are fully inserted, and that the remote has batteries installed.
I have extra parts
The TV includes some optional parts to help with wall mounting and cable routing.
To control the highlight, move
your thumb across the pad.
To select an item, press the
pad until you hear a click.
Move your thumb along the
ridges to quickly scroll through
items.
If you experience issues, please do not take the TV back
to the store.
In the United States of America, call us at
1-800-SAMSUNG (1-800-726-7864) or visit us at www.
samsung.com or www.samsung.com/spsn for support
and warranty service.
Pairing the Smart Touch Control
If you need to reestablish the connection between the TV and the Smart Touch Control, press the
pairing button at the back of the Smart Touch Control, pointing at the remote control sensor of
the TV.
Congratulations on your new Smart TV!
[UF7050_QSG]BN68-05041A-02ENG.indb 3
For other countries, refer to "Contact SAMSUNG
WORLDWIDE" in the user guide.
\
2013-07-29 �� 5:15:17