CyberResearch FPC 1702-P24 User`s manual

®
Panel PCs
FPC 1502 Series
NEMA 4 Sealed 15" Panel PC
System; 2 PCI Expansion Slots
FPC 1502-C20/-T: Celeron 2.0GHz/Optional Touchscreen
FPC 1502-P24/-T: Pentium 2.4GHz/Optional Touchscreen
FPC 1502-P30/-T: Pentium 3.06GHz/Optional Touchscreen
USER’S MANUAL
VER. 1.0 • 2004
No part of this manual may be reproduced without permission
CyberResearch , Inc.
®
www.cyberresearch.com
25 Business Park Dr., Branford, CT 06405 USA
203-483-8815 (9am to 5pm EST) FAX: 203-483-9024
®
CyberResearch Panel PCs
FPC 1502 Series
©Copyright 2004
All Rights Reserved.
2004
The information in this document is subject to change without prior notice
in order to improve reliability, design, and function and does not represent
a commitment on the part of CyberResearch, Inc.
In no event will CyberResearch, Inc. be liable for direct, indirect, special,
incidental, or consequential damages arising out of the use of or inability
to use the product or documentation, even if advised of the possibility of
such damages.
This document contains proprietary information protected by copyright.
All rights are reserved. No part of this manual may be reproduced by any
mechanical, electronic, or other means in any form without prior written
permission of CyberResearch, Inc.
Trademarks
“CyberResearch,” and “FPC 1502 Series,” are trademarks of
CyberResearch, Inc. Other product names mentioned herein are used for
identification purposes only and may be trademarks and/or registered
trademarks of their respective companies.
• NOTICE •
CyberResearch, Inc. does not authorize any CyberResearch product for
use in life support systems, medical equipment, and/or medical devices
without the written approval of the President of CyberResearch, Inc. Life
support devices and systems are devices or systems which are intended
for surgical implantation into the body, or to support or sustain life and
whose failure to perform can be reasonably expected to result in injury.
Other medical equipment includes devices used for monitoring, data
acquisition, modification, or notification purposes in relation to life
support, life sustaining, or vital statistic recording. CyberResearch
products are not designed with the components required, are not subject
to the testing required, and are not submitted to the certification required
to ensure a level of reliability appropriate for the treatment and diagnosis of
humans.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
iii
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CyberResearch Panel PCs
FPC 1502 Series
Intentionally Blank
iv
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
Packing List
Before you begin installing your card, please make sure that the following
materials have been shipped:
•
1 FPC 1502 Series Panel PC
•
10 Panel mount clip & screw
•
1 Hardware Bag
•
1 Waterproof Gasket
•
1 Jumper Cap
•
2 Easy stand
•
1 Power Cord (optional)
•
1 CD-ROM for manual (in PDF format) and drivers
If any of these items should be missing or damaged, please contact your
distributor or sales representative immediately.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
v
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CyberResearch Panel PCs
FPC 1502 Series
Safety
1. Read these safety instructions carefully.
2. Keep this user's manual for later reference.
3.
Disconnect this equipment from any AC outlet before cleaning. Do not
use liquid or spray detergents for cleaning. Use a damp cloth.
4.
For pluggable equipment, the power outlet must be installed near the
equipment and must be easily accessible.
5.
Keep this equipment away from humidity.
6.
Put this equipment on a reliable surface during installation. Dropping it
or letting it fall could cause damage.
7.
The openings on the enclosure are for air convection. Protect the
equipment from overheating. DO NOT COVER THE OPENINGS.
8.
Make sure the voltage of the power source is correct before connecting
the equipment to the power outlet.
9.
Position the power cord so that people cannot step on it. Do not place
anything over the power cord.
10. All cautions and warnings on the equipment should be noted.
11. If the equipment is not used for a long time, disconnect it from the
power source to avoid damage by transient over-voltage.
12. Never pour any liquid into an opening. This could cause fire or
electrical shock.
13. Never open the equipment. For safety reasons, only qualified service
personnel should open the equipment.
14. If any of the following situations arises, get the equipment checked by
service personnel:
a. The power cord or plug is damaged.
b. Liquid has penetrated into the equipment.
vi
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
c. The equipment has been exposed to moisture.
d. The equipment does not work well, or you cannot get it to work
according to the users manual.
e. The equipment has been dropped and damaged.
f. The equipment has obvious signs of breakage.
15. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED
ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS
BELOW -20° C (-4° F) OR ABOVE 60° C (140° F). IT MAY
DAMAGE THE EQUIPMENT.
16. External equipment intended for connection to signal input/output or
other connectors, shall comply with relevant UL / IEC standard (e.g.
UL 60950 for IT equipment and UL 2601-1 / IEC 60601 series for
medical electrical equipment). In addition, all such combinations –
systems – shall comply with the standard IEC 60601-1-1, Safety
requirements for medical electrical systems. Equipment not complying
with UL 2601-1 shall be kept outside the patient environment, as
defined in the standard.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
vii
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CyberResearch Panel PCs
FPC 1502 Series
FCC Safety
This device complies with Part 15 FCC Rules.
Operation is subject to the following two
conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received including
interference that may cause undesired
operation.
viii
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
Table of Contents
Packing List ....................................................................v
Safety..............................................................................vi
FCC Safety......................................................................viii
General Information ................... ..1
Introduc tion................................................................... 3
Features ......................................................................... 5
Specifications................................................................ 6
Dimensions....................................................................12
Hardware Installation.................13
Safety Precautions ........................................................14
Location of Connectors and Jumpers ...........................15
List of Jumpers .............................................................16
List of Connectors.........................................................17
Setting Jumpers.............................................................18
Clear CMOS (JP1) ........................................................19
Audio Out Select (JP2) .................................................19
COM2 Ring/+5V/+12V Selection (JP3).......................19
COM2 RS-232/422/485 Select (JP4&JP5)...................20
ATX Power simulate AT Power (JP6)...........................20
IDE Connector (CN1)...................................................21
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
ix
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
CPEM Series
®
CyberResearch CPU Cards
Fan Connector (CN8&CN24).......................................22
10/100Base-Tx Ethernet Connector (CN11) ................22
Option PME Connector (CN12) ...................................22
Floppy Connector (CN13) ............................................23
LPT Port Connector (CN14).........................................23
COM1~3 RS-232/422/485 Serial Port Connector (CN16)
......................................................................................24
PS2 Keyboard/Mouse Connector (CN17) ....................25
Digital I/O Port .............................................................26
VGA Display Connector (CN22)..................................27
ATX Power Connector (CN27) ....................................28
ATX Power 12V Connector (CN28).............................29
FDD & CD-ROM Installation......................................30
HDD Installation...........................................................33
Easy Stand Installation..................................................36
Panel Mount Kit Installation.........................................37
Waterproof sponge Installation.....................................38
BIOS Installation ..........................39
System test and initialization........................................40
Award BIOS Setup ........................................................41
Standard CMOS Features .............................................44
Advanced BIOS Features .............................................45
Advanced Chipset Features ..........................................46
Integrated Peripherals ...................................................47
x
©Copyright 2003 CyberResearch, Inc.
®
CyberResearch CPU Cards
CPEM Series
Power management Setup .............................................48
PnP/PCI configuration..................................................49
PC Health Status ...........................................................50
Frequency/Voltage control............................................51
Load FPC 1502 Defaults...............................................52
Set Supervisor/User Password ......................................53
Save & Exit Setup .........................................................54
Exit without saving .......................................................55
Limitations ....................................................................56
Driver Installation ........................57
Installation ....................................................................58
LAN Driver Installation................................................60
Card Reader Driver Installation....................................61
Touch screen Driver Installation...................................61
Limitations ....................................................................61
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
1
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
1
Chapter
General
Information
®
CyberResearch Panel PCs
FPC 1502 Series
Introduction
FPC 1502 Series is the first Pentium®4 industrial board in the CyberResearch
Panel PC product line. It features a PGA478 socket that can accommodate
Pentium®4 3.06GHz and Celeron® processors, supporting FSB speed
of up to 400/533MHz.
Best performance for multimedia solution
The FPC 1502 Series also supports DDR DRAM up to 1GB, 4X
AGP, and 5.1 channels audio output. It can provide the strong
multimedia functions. Therefore FPC 1502 Series can be broadly
implemented in several markets, such as Point of sale, point of
information (Kiosk), and gaming markets.
Multi-Function Pentium4 Platform
If you are looking for powerful multi-media applications,
FPC 1502 Series is the one. The FPC 1502 integrates 15” color TFT LCD,
Digital I/O, Audio and Ethernet function; while it additioally supports
up to 5 USB 2.0 ports, mini PCI, and two PCI slots. With flexible
expansion, you get easy access to solutions ranging from Modem,
Storage, Sound Card, SCSI card, Audio/Video capture card, Wireless
LAN module, to Bluetooth module. Especially for customers whom
application is various or changing, FPC 1502 Series reserves more than
enough flexibility for future expansion.
FPC 1502 Series provides more CPU options for different applications.
You can choose Pentium®4 processor up to 3.06G for high
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
3
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
FPC 1502 Series
®
CyberResearch Panel PCs
performance application. Most of all Pentium®4 Level processors
are suitable for FPC 1502 Series.
4
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
Features
15” TFT XGA (1024 x 768) LCD
All-in-one SBC support Socket 478 based Intel®
Pentium®4 Processor
Support Intel®Hyper-Threading Technology
Anti-vibration disk drive bay for HDD
Water-proof and anti-scratch aluminum front panel with
USB port IP-65 certification
Two free PCI expansion slots
Digital I/O (8 in, 8 out as Default, up to 16 in or 16 out)
Resistive Touch screen (Optional)
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
5
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CyberResearch Panel PCs
FPC 1502 Series
Specifications
System
Construction
Heavy-duty steel chassis & IP-65
certified aluminum front panel
CPU
Socket 478 based Pentium®
4(.13μ) / Celeron® Processors up
to 3.06GHz with FSB
400/533MHz,
Hyper-Threading Technology
supported
Memory
184 pin DIMM x 1, support
DDR 200/266/333MHz up to
1GB
Display
15” XGA color TFT LCD
LCD / CRT controller Intel® i845GV, AGP 4X
Network (LAN)
Intel® 82562 10/100 Base-T
Ethernet controller
I/O Chipset
6
3 serial ports: 2 x RS-232, 1 x
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
RS-232/422/485 (COM 4 is
reserved for touch screen)
1 parallel port (supports ECP/EPP)
1 PS/2 mouse and keyboard port
1 VGA port
Mic in, Line in, Line out, S/P DIF
5.1 channels audio port
GPIO: 16 in or 16 out
Storage Disk Drive Anti-vibration 2.5”HDD, Slim
FDD and Slim CD-ROM
USB ports
4 USB 2.0 ports on rear chassis
1 USB 2.0 port on front panel
(Lockable by BIOS)
Because of USB chipset limitation, front USB port and
Card reader USB interface are linked together, when
user “disable” front USB port (USB Port 3
controller ), the card reader must be forced to disable at
same time.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
Front Panel
PMS 2965C (Dark Blue)
Mounting
Panel Mount, VESA
7
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CyberResearch Panel PCs
FPC 1502 Series
75/100mm holes
Expansion slots
2 PCI slots
1 Mini PCI socket
6in1 card reader.
Because of drivers bug, after successfully installing card
reader drivers, two vanity disk drives appear: XD and
Flash. Please ignore the two useless disk drives.
Support CompactFlash® (Type
I/II), Secure Digital, Multi Media
Card, Memory Stick (PRO) and
Smart Media
Power Supply
Universal 250W switching power
Supply with Active PFC
OS support
Windows 98SE, Windows 2000,
Windows XP
Dimension (W x H x D) 444 x 336 x 144mm
(17.5” x 13.2” x 5.7”)
Carton Dimension (W x H x D) 555 x 460 x 355mm
(21.9” x 18.1” x 14” )
Gross Weight
8
15KG (33.1 lbs)
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
Power Supply
AC input 250W (standard offer):
Output rating: 250W
Input voltage:
100VAC~240VAC@47~63Hz
Output voltage:
+3.3V@16A, + 5V@25A, +12V@13A,
+5VSB@2A, -5V@0.3A, -12V@0.8A
24V DC input:
Output rating: 300W (Maximum)
Input voltage: 19VDC~36VDC@30A
Maximum
Output voltage:
+5V@25A, +12V@22A,
+3.3V@20A, -5V@0.8A, -12V@1A,
5VSB@1.5A
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
9
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CyberResearch Panel PCs
FPC 1502 Series
LCD Specifications
Display type
15” color TFT LCD
Max. Resolution
1024 x 768
Max. Colors
256K
Dot size (mm)
0.297 x 0.297
Luminance (cd/m2)
250 (TYP)
150°
(H)
Viewing angle
145°
(V)
Back Light MTBF (Hrs)
30,000
Touch screen (Optional)
Type
8-wire, analog resistive
Resolution
2048 x 2048
Light transmission
>75%
Lifetime
1 million activations
OS support
Windows 98SE, Windows 2000,
Windows XP
Environment Specifications
Operating temperature 0 ℃~50 ℃ (32~122℉)
Storage temperature
-20℃~60 ℃ (-4~140℉)
Operating humidity
10 to 90% @35℃,
non-condensing
10
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
Vibration
1G / 5~500Hz (Random /
operation)
Shock
15G peak acceleration (11
msec. duration) / operation
EMC
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
CE/FCC Class B
11
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CyberResearch Panel PCs
FPC 1502 Series
Dimensions
402.2
FPC 1502 Series
Unit:mm
296.0
43.0
144.0
20.0
336.0
20.0
444.0
Cutout Size:405*299 mm
12
©Copyright 2004 CyberResearch, Inc.
2
Chapter
Hardware
Installation
®
CyberResearch Panel PCs
FPC 1502 Series
Safety Precautions
Always completely disconnect the power cord from
your board whenever you are working on it. Do not
make connections while the power is on, because a
sudden rush of power can damage sensitive
electronic components.
Always ground yourself to remove any static charge
before touching the board. Modern electronic
devices are very sensitive to static electric charges.
Use a grounding wrist strap at all times. Place all
electronic components on a static-dissipative
surface or in a static-shielded bag when they are not
in the chassis
14
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
Location of Connectors and Jumpers
Component Side
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
15
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CyberResearch Panel PCs
FPC 1502 Series
List of Jumpers
There are a number of jumpers in the board that allow you to configure your
system to suit your application.
The table below shows the function of each jumper in the board:
Jumpers
16
Label
Function
JP1
Clear CMOS
JP2
Audio Out Select
JP3
COM2 Ring/+5V/+12V Selection
JP4
COM2 RS-232/422/485 Selection
JP5
COM2 RS-232/422/485 Selection
JP6
ATX Power simulate AT Power
JP7
LCD Voltage Selection
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
List of Connectors
There are a number of connectors in the board that allow you to configure
your system to suit your application. The table below shows the function of
each connector in the board:
Connectors
Label
Function
CN1
EIDE HDD Connector
CN8,CN24
Fan Connector
CN11
10/100Base-Tx Ethernet Connector
CN12
Option PME Connector
CN22
VGA Display Connector
CN23
MINI PCI SLOT
CN25
Front Panel
CN27
ATX Power Connector
CN28
ATX Power 12V Connector
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
17
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CyberResearch Panel PCs
FPC 1502 Series
Setting Jumpers
You configure your card to match the needs of your application by setting
jumpers. A jumper is the simplest kind of electric switch. It consists of two
metal pins and a small metal clip (often protected by a plastic cover) that
slides over the pins to connect them. To “close” a jumper you connect the
pins with the clip.
To “open” a jumper you remove the clip. Sometimes a jumper will have
three pins, labeled 1, 2 and 3. In this case you would connect either pins 1
and 2 or 2 and 3.
3
1 2
Open
Closed
Closed 2-3
A pair of needle-nose pliers may be helpful when working with jumpers.
If you have any doubts about the best hardware configuration for your
application, contact your local distributor or sales representative before you
make any change.
Generally, you simply need a standard cable to make most connections.
18
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
Clear CMOS (JP1)
Warning:
To avoid damaging the computer, always turn off the power supply before setting
“ Clear CMOS. ” Before turning on the power supply, set the jumper back to
“Normal.”
JP1
Function
1-2
Active (Default)
2-3
Clear
Audio Out Select (JP2)
JP2
Function
1-3, 2-4
W/O Amplifier (Default)
3-5, 4-6
W/ Amplifier
COM2 Ring/+5V/+12V Selection (JP3)
JP3
Function
1-2
+12V
3-4
+5V
5-6
Ring (Default)
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
19
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CyberResearch Panel PCs
FPC 1502 Series
COM2 RS-232/422/485 Select (JP4&JP5)
JP4
JP5
Function
1-2, 4-5, 7-8, 10-11
1-2
RS-232 (Default)
2-3, 5-6, 8-9, 11-12
3-4
RS-422
2-3, 5-6, 8-9, 11-12
5-6
RS-485
ATX Power simulate AT Power (JP6)
20
JP6
Function
1-2 ON
ATX Power Simulate AT Power
1-2 OFF
ATX Standard (Default)
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
IDE Connector (CN1)
Pin
Signal
Pin
Signal
1
IDE RESET
2
GND
3
DATA7
4
DATA8
5
DATA6
6
DATA9
7
DATA5
8
DATA10
9
DATA4
10
DATA11
11
DATA3
12
DATA12
13
DATA2
14
DATA13
15
DATA1
16
DATA14
17
DATA0
18
DATA15
19
GND
20
N.C
21
REQ
22
GND
23
IO WRITE
24
GND
25
IO READ
26
GND
27
IO READY
28
GND
29
DACK
30
GND
31
IRQ14
32
N.C
33
ADDR1
34
UDMA DETECT
35
ADDR0
36
ADDR2
37
CS#1
38
CS#3
39
LED
40
GND
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
21
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CyberResearch Panel PCs
FPC 1502 Series
Fan Connector (CN8&CN24)
Pin
Signal
1
GND
2
+5V
3
FAN SPEED SENSE
10/100Base-Tx Ethernet Connector (CN11)
Pin
Signal
Pin
Signal
1
TX+
9
N.C
2
TX-
10
N.C
3
RX+
11
GND
4
N.C
12
GND
5
N.C
13
N.C
6
RX-
14
N.C
7
N.C
15
N.C
8
N.C
16
N.C
Option PME Connector (CN12)
22
Pin
Signal
Pin
Signal
1
+5VSB
2
GND
3
#PME
4
SMB_DATA
5
SMB_CLK
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
Floppy Connector (CN13)
Pin
Signal
Pin
Signal
1
GND
2
REDWC
3
GND
4
N.C
5
GND
6
DS1
7
GND
8
INDEX
9
GND
10
MOTOR A
11
GND
12
DRIVE SELECT B
13
GND
14
DRIVE SELECT A
15
GND
16
MOTOR B
17
GND
18
DIR
19
GND
20
STEP
21
GND
22
WRITE DATA
23
GND
24
WRITE GATE
25
GND
26
TRACK
27
GND
28
WRITE PROTECT
29
GND
30
READ DATA
31
GND
32
SIDE1
33
GND
34
DISK CHANGE
LPT Port Connector (CN14)
Pin
Signal
Pin
Signal
1
STROBE
2
AFD
3
PTD0
4
ERROR
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
23
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CyberResearch Panel PCs
FPC 1502 Series
5
PTD1
6
INIT
7
PTD2
8
SLIN
9
PTD3
10
GND
11
PTD4
12
GND
13
PTD5
14
GND
15
PTD6
16
GND
17
PTD7
18
GND
19
ACK
20
GND
21
BUSY
22
GND
23
PE
24
GND
25
SELECT
26
N.C
COM1~3 RS-232/422/485 Serial Port Connector
(CN16)
Only COM1 support “Wake on Ring” function.
24
Pin
Signal
Pin
Signal
1
DCD1
2
DSR1
3
RXD1
4
RTS1
5
TXD1
6
CTS1
7
DTR1
8
RI1
9
GND
10
N.C
11
DCD2(422TXD-/485DATA-)
12
DSR2 (422RXD+)
13
RXD2(422TXD+/485DATA+)
14
RTS2 (422RXD-)
15
TXD2
16
CTS2
17
DTR2
18
RI2
19
GND
20
N.C
21
DCD3
22
DSR3
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
23
RXD3
24
RTS3
25
TXD3
26
CTS3
27
DTR3
28
RI3
29
GND
30
N.C
31
DCD4
32
DSR4
33
RXD4
34
RTS4
35
TXD4
36
CTS4
37
DTR4
38
RI4
39
GND
40
N.C
PS2 Keyboard/Mouse Connector (CN17)
Pin
Signal
1
KB_DATA
2
KB_CLK
3
GND
4
+5V
5
MS_DATA
6
MS_CLK
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
25
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CyberResearch Panel PCs
FPC 1502 Series
Digital I/O Port
26
Pin
Signal
I/O Address Setting
1
Digital-IN / OUT
841H
2
Digital-IN / OUT
841H
3
Digital-IN / OUT
841H
4
Digital-IN / OUT
841H
5
GND
6
GND
7
Digital-IN / OUT
841H
8
Digital-IN / OUT
841H
9
Digital-IN / OUT
841H
10
Digital-IN / OUT
841H
11
GND
12
GND
13
Digital-IN / OUT
801H
14
Digital-IN / OUT
801H
15
Digital-IN / OUT
801H
16
Digital-IN / OUT
801H
17
GND
18
GND
19
Digital-IN / OUT
801H
20
Digital-IN / OUT
801H
21
Digital-IN / OUT
801H
22
Digital-IN / OUT
801H
23
+5V
24
+5V
25
+5V
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
The pin definitions and registers mapping are illustrated below:
Address: 841H
4 in / 4 out
Pin1
Pin2
Pin3
Pin4
Pin7
Pin8
Pin9
Pin10
GPI 27
GPI 26
GPI 25
GPI 24
GPO 23
GPO 22
GPO 21
GPO 20
MSB
LSB
8 in
Pi n 1
Pin2
Pin3
Pin4
Pin7
Pin8
Pin9
Pin10
GPI 27
GPI 26
GPI 25
GPI 24
GPI 23
GPI 22
GPI 21
GPI 20
MSB
LSB
8 out
Pin1
Pin2
Pin3
Pin4
Pin7
Pin8
Pin9
Pin10
GPO 27
GPO 26
GPO 25
GPO 24
GPO 23
GPO 22
GPO 21
GPO 20
MSB
LSB
Address: 801H
4 in/ 4 out
Pin13
Pi n 1 4
Pin15
Pin16
Pin19
Pin20
Pin21
Pin22
GPI 27
GPI 26
GPI 25
GPI 24
GPO 23
GPO 22
GPO 21
GPO 20
MSB
LSB
8 in
Pin13
Pin14
Pin15
Pin16
Pin19
Pin20
Pin21
Pin22
GPI 27
GPI 26
GPI 25
GPI 24
GPI 23
GPI 22
GPI 21
GPI 20
MSB
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
LSB
27
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CyberResearch Panel PCs
FPC 1502 Series
8 out
Pin13
Pin14
Pin15
Pin16
Pin19
Pin20
Pin21
Pin22
GPI 27
GPI 26
GPI 25
GPI 24
GPI 23
GPI 22
GPI 21
GPI 20
MSB
LSB
VGA Display Connector (CN22)
Pin
Signal
Pin
Signal
1
Red
9
GND
2
VCC
10
HSYNC
3
Green
11
GND
4
GND
12
VSYNC
5
Blue
13
GND
6
N.C
14
SCL
7
N.C
15
GND
8
SDA
16
N.C
ATX Power Connector (CN27)
28
Pin
Signal
Pin
Signal
1
+3.3V
11
+3.3V
2
+3.3V
12
-12V
3
GND
13
GND
4
+5V
14
PS_ON
5
GND
15
GND
6
+5V
16
GND
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
7
GND
17
GND
8
POWER OK
18
-5V
9
+5VSB
19
+5V
10
+12V
20
+5V
ATX Power 12V Connector (CN28)
Pin
Signal
Pin
Signal
1
GND
2
GND
3
+12V
4
+12V
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
29
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
FPC 1502 Series
®
CyberResearch Panel PCs
FDD & CD-ROM Installation
We will guide you how to lock FDD and CD-ROM together. Please see the
detail as follows.
Step 1: Plug in FDD cable
30
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
Step 2: Fasten the FDD and CD-ROM together with two brack ets on the
both sides symmetrically.
Step 3: Fasten the transferring bar with a pair of screws on the back of the
CD-ROM.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
31
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
FPC 1502 Series
®
CyberResearch Panel PCs
Step 4: Plug in CD-ROM Cable
32
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
HDD Installation
In the following, we will guide you how to install HDD. Make sure that all
parts are provided before you start the installation.
Step 1: Lock with the screws as the illustration shown.
Step 2: Cover the screws with four pieces of anti-vibration rubbers
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
33
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
FPC 1502 Series
®
CyberResearch Panel PCs
Step 3: There’ re two pieces of iron surfaces as the illustration shown.
Step 4: Locate the HDD on one piece of the iron surface and fasten it
with the screws.
34
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
Step 5: Cover it with another piece of iron surface and lock it with
the screws.
Step 6: Fix the HDD module into the FPC 1502 Series chassis and plug
the cable in.
Fix the HDD module with the screws
Plug the cable in
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
35
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CyberResearch Panel PCs
FPC 1502 Series
Easy Stand Installation
Two L-shaped easy stands accompany the product. Refer to the
following illustration to install them.
1.
Affix the L-shaped easy stands with the screws on both sides of the
monitor. See the illustration below:
*4-M4 Screw
36
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
Panel Mount Kit Installation
Some screw sets will come with the product for user to mount the monitor
on the wall. See the steps below along with the illustration.
Step 1: Bore the screw into the screw nut.
Step 2: Locate the s crew set into the hole around the monitor as the
right illustration and pull it back to lock the screw set on the hole.
Step 3: Turn the screw around to make it tight until it is closed to the wall.
Step 4: Lock the monitor to the wall with the screw set which mean
you’ ve done a good job.
1
2
3
4
Panel Mounting
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
37
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CyberResearch Panel PCs
FPC 1502 Series
Waterproof Gasket Installation
The following illustration shows you how to install the waterproof gasket
behind the monitor set.
1.
Install the gasket behind the monitor set.
2.
Install the monitor set on the wall.
Gasket
Wall
38
©Copyright 2004 CyberResearch, Inc.
3
Chapter
BIOS
Installation
®
CyberResearch Panel PCs
FPC 1502 Series
System test and initialization
These routines test and initialize board hardware. If the routines encounter
an error during the tests, you will either hear a few short beeps or see an
erro r message on the screen. There are two kinds of errors: fatal and nonfatal. The system can usually continue the boot up sequence with non-fatal
errors. Non-fatal error messages usually appear on the screen along with the
following instructions:
Press <F1> to RESUME
Write down the message and press the F1 key to continue the boot up
sequence.
System configuration verification
These routines check the current system configuration against the values
stored in the CMOS memory. If they do not match, the program outputs an
error message. You will then need to run the BIOS setup program to set the
configuration information in memory.
There are three situations in which you will need to change the CMOS
settings:
40
1.
You are starting your system for the first time
2.
You have changed the hardware attached to your system
3.
The CMOS memory has lost power and the configuration
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
information has been erased.
The FPC 1502 Series CMOS memory has an integral lithium battery backup for
data retention. However, you will need to replace the co mplete unit when it
finally runs down.
Award BIOS Setup
Awards BIOS ROM has a built-in Setup program that allows users to
modify the basic system configuration. This type of information is
stored in battery-backed CMOS RAM so that it retains the Setup
information when the power is turned off.
Entering setup
Power on the computer and press <Del> immediately. This will
allow you to enter Setup.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
41
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
FPC 1502 Series
®
CyberResearch Panel PCs
Standard CMOS Features
Use this menu for basic system configuration. (Date, time, IDE, etc.)
Advanced BIOS Features
Use this menu to set the advanced features available on your system.
Advanced Chipset Features
Use this menu to change the values in the chipset registers and
optimize your system performance.
Integrated Peripherals
Use this menu to specify your settings for integrated peripherals.
(Primary slave, secondary slave, keyboard, mouse etc.)
Power Management Setup
Use this menu to specify your settings for power management.
(HDD power down, power on by ring, KB wake up, etc.)
PnP/PCI Configurations
This entry appears if your system supports PnP/PCI.
PC Health Status
This menu allows you to set the shutdown temperature for your
system.
Frequency/Voltage Control
Use this menu to specify your settings for frequency/ voltage control.
Load FPC 1502 Series Defaults
Use this menu to load the BIOS default values for the minimal/stable
performance for your system to operate.
42
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
Set Supervisor/User Password
Use this menu to set Supervisor/User Passwords.
Save and Exit Setup
Save CMOS value changes to CMOS and exit setup.
Exit Without Saving
Abandon all CMOS value changes and exit setup.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
43
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
FPC 1502 Series
®
CyberResearch Panel PCs
Standard CMOS Features
When you choose the Standard CMOS Features option from the
INITIAL SETUP SCREEN menu, the screen shown below is
displayed. This standard Setup Menu allows users to configure system
components such as date, time, hard disk drive, floppy drive and
display. Once a field is highlighted, on-line help information is
displayed in the right box of the Menu screen.
44
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
Advanced BIOS Features
By choosing the Advanced BIOS Features option from the INITIAL
SETUP SCREEN menu, the screen below is displayed. This sample
screen contains the manufacturer’ s default values for the FPC 1502 Series.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
45
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CyberResearch Panel PCs
FPC 1502 Series
Advanced Chipset Features
By choosing the Advanced Chipset Features option from the
INITIAL SETUP SCREEN menu, the screen below is displayed.
This sample screen contains the manufacturer’ s default values for the
FPC 1502 Series.
Attention:
The LCD signal may be turned off automatically after the VGA
driver is installed, please press “Ctrl + Alt + F3” to enable LCD
signal again.
46
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
Integrated Peripherals
By choosing the Integrated Peripherals from the INITIAL SETUP
SCREEN menu, the screen below is displayed. This sample screen
contains the manufacturer’ s default values for the FPC 1502 Series.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
47
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
FPC 1502 Series
®
CyberResearch Panel PCs
Power management Setup
By choosing the Power Management Setup from the INITIAL
SETUP SCREEN menu, the screen below is displayed. This sample
screen contains the manufacturer’ s default values for the FPC 1502 Series.
48
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
PnP/PCI configuration
By choosing the PnP/PCI configurations from the Initial Setup
Screen menu, the screen below is displayed. This sample screen
contains the manufacturer’ s default values for the FPC 1502 Series.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
49
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
FPC 1502 Series
®
CyberResearch Panel PCs
PC Health Status
By choosing the PC Health Status from the Initial Setup Screen menu,
the screen below is displayed. This sample screen contains the
manufacturer’ s default values for the FPC 1502 Series.
50
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
Frequency/Voltage control
By choosing the Frequency/Voltage Control from the Initial Setup
Screen menu, the screen below is displayed. This sample screen
contains the manufacturer’ s default values for the FPC 1502 Series.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
51
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
FPC 1502 Series
®
CyberResearch Panel PCs
Load FPC 1502 Series Defaults
When you press <Enter> on this item you get a confirmation dialog
box with a message similar to:
To load the FPC 1502 defaults, select Load APC-8152 Defaults.
Selecting "Y" loads the BIOS default values for the most stable,
minimal performance system operations.
52
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
Set Supervisor/User Password
You can set either SUPERVISOR or USER PASSWORD, or both of
them. The difference between the two is that the supervisor password
allows unrestricted access to enter and change the options of the
setup menus, while the user password only allows entry to the
program, but not modify options.
To abort the process at any time, press Esc.
In the Security Option item in the BIOS Features Setup screen, select
System or Setup:
System
Enter a password each time the system boots and when-
ever you enter Setup.
Setup
Enter a password whenever you enter Setup.
NOTE: To clear the password, simply press Enter when asked to
enter a password. Then the password function is disabled.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
53
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
FPC 1502 Series
®
CyberResearch Panel PCs
Save & Exit Setup
If you select this option and press <Enter>, the values entered in the
setup utilities will be recorded in the chipset’ s CMOS memory. The
microprocessor will check this every time you turn on your system
and compare this to what it finds as it checks the system. This record
is required for the system to operate.
54
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
Exit without saving
Selecting this option and pressing <Enter> allows you to exit the
Setup program without recording any new value or changing old one.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
55
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CyberResearch Panel PCs
FPC 1502 Series
Limitations
56
1.
Due to Intel chipset limitation, when CMOS was set up to “LCD
+ CRT”, the LCD display will not support full-screen appearance.
2.
Because of USB chipset limitation, front USB port and Card reader
USB interface are linked together, when user “disable” front USB
port ( USB Port 3 controller), the card reader must be forced to
disable at same time.
©Copyright 2004 CyberResearch, Inc.
4
Chapter
Driver
Installation
®
CyberResearch Panel PCs
FPC 1502 Series
There are several installation ways depending on the driver package
under different Operating System application.
Please follow the sequence below to install the drivers:
Step 1 – Install Intel INF Update For Windows 9x-XP Driver
Step 2 – Install Intel 845G Graphic Driver
Step 3 – Install Intel Application Accelerator for Windows 9x-XP
Driver
Step 4 – Install Intel LAN Driver V6.4
Step 5 – Install Realtek AC97 codec Driver
Step 6 – Card Reader Driver
Step 7 – Touch screen Driver
USB 2.0 Drivers are available for download using Windows Update
for both Windows XP and Windows 2000. For additional
information regarding USB 2.0 support in Windows XP and
Windows 2000, please visit www.microsoft.com/hwdev/usb/.
For installation procedures of each driver, you may see the details in
the following.
Installation
Applicable for Windows 98SE / 2000 / XP
1.
From the CD-ROM, select the desired component Driver folder,
and then select the desired Operation System folder to double
click on the Setup.exe icon. A driver installation screen will
appear.
Notice:
58
1.
Take VGA driver installation under Windows 98 for
example, choose the corresponding folder depending
on your OS
2.
When installing the VGA driver under Windows 98, the
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
system will ask you to reboot the computer. During the
installation process, it will appear the pop up window
as following.
2.
3.
Please press ok and it will appear the pop up window
as following.
4.
Please change the path to the installation folder and
search for the two files named as ikch8xx.cat and
isb8xx.cat.
A driver installation screen will appear, please follow the
onscreen instructions to install the driver in sequence and click
on the Next button.
Notice: In some cases the system will ask you to insert
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
59
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CyberResearch Panel PCs
FPC 1502 Series
Windows 98 CD ROM and key in its path. Then click on
the OK button to key in path.
3.
Click on the Finish button to finish installation process. And
allow the system to reboot.
4.
The LCD signal may be turned off automatically after the VGA
driver is installed, please press "Ctrl+Alt+F3" to enable LCD
signal again.
LAN Driver Installation
We strongly recommend that you shall not install LAN driver by
clicking on Autorun Exe. Please follow the steps in order to finish the
process of installation.
1. Click on Start button → Settings → Control Panel → System
2. Select Device Manager under the Hardware category.
3. Double click on the Ethernet controller and select update
Driver button under the Driver category.
4. Click Next twice and click the Specify a location option.
5. Click Next and choose a route where you want place the folders
on before you click on open.
6. Click Next → Yes → Finish and the window will show you
how to finish the installation process.
Note: We strongly recommend that you shall not install LAN driver
by clicking on Autorun. Exe.
60
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
Card Reader Driver Installation
1.
Enter Driver → System → FPC 1502 & FPC 1702 Series → Step 6
Card Readers Driver folder.
2.
Double click on the Setup exe. file.
3.
Language setting: Choose the highlighted item below to operate
your system in English.
4.
Follow the instruction that the window will show to finish the
installation.
Touch screen Driver Installation
1.
Enter Driver → System → FPC 1502 & FPC 1702 Series → Step 7
Touch screen Driver folder.
2.
Double click on the Setup exe. file.
Touch screen Driver installation Guide won’ t be explained in this section.
You can read the detailed touch screen driver Guide in the folder of
touch screen driver.
Limitations
•
The limitations you may need to notice when you start to install
the driver. For the sake of USB4 and USB5 community of
linkage, the card reader must be forced to disable when the
users “disable” front USB port.
•
For the sake of the bugs of card reader driver, two useless disk
drives will appear: XD and Flash after installing drivers
successfully. Please ignore the two useless disk drives.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
61
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CyberResearch Panel PCs
FPC 1502 Series
Intentionally Blank
66
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
Product Service
Diagnosis and Debug
CyberResearch, Inc. maintains technical support lines staffed by experienced
Applications Engineers and Technicians. There is no charge to call and we will
return your call promptly if it is received while our lines are busy. Most problems
encountered with data acquisition products can be solved over the phone. Signal
connections and programming are the two most common sources of difficulty.
CyberResearch support personnel can help you solve these problems, especially
if you are prepared for the call.
To ensure your call’s overall success and expediency:
1)
2)
3)
4)
5)
6)
Have the phone close to the PC so you can conveniently and quickly take
action that the Applications Engineer might suggest.
Be prepared to open your PC, remove boards, report back-switch or
jumper settings, and possibly change settings before reinstalling the
modules.
Have a volt meter handy to take measurements of the signals you are
trying to measure as well as the signals on the board, module, or power
supply.
Isolate problem areas that are not working as you expected.
Have the source code to the program you are having trouble with available
so that preceding and prerequisite modes can be referenced and
discussed.
Have the manual at hand. Also have the product’s utility disks and any
other relevant disks nearby so programs and version numbers can be
checked.
Preparation will facilitate the diagnosis procedure, save you time, and avoid
repeated calls. Here are a few preliminary actions you can take before you call
which may solve some of the more common problems:
1)
2)
3)
4)
Check the PC-bus power and any power supply signals.
Check the voltage level of the signal between SIGNAL HIGH and SIGNAL
LOW, or SIGNAL+ and SIGNAL– . It CANNOT exceed the full scale range
of the board.
Check the other boards in your PC or modules on the network for address
and interrupt conflicts.
Refer to the example programs as a baseline for comparing code.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
63
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CyberResearch Panel PCs
FPC 1502 Series
Intentionally Blank
64
©Copyright 2004 CyberResearch, Inc.
®
CyberResearch Panel PCs
FPC 1502 Series
Warranty Notice
CyberResearch, Inc. warrants that this equipment as furnished will be free from
defects in material and workmanship for a period of one year from the confirmed
date of purchase by the original buyer and that upon written notice of any such
defect, CyberResearch, Inc. will, at its option, repair or replace the defective item
under the terms of this warranty, subject to the provisions and specific exclusions
listed herein.
This warranty shall not apply to equipment that has been previously repaired or
altered outside our plant in any way which may, in the judgment of the manufacturer,
affect its reliability. Nor will it apply if the equipment has been used in a manner
exceeding or inconsistent with its specifications or if the serial number has been
removed.
CyberResearch, Inc. does not assume any liability for consequential damages as a
result from our products uses, and in any event our liability shall not exceed the
original selling price of the equipment.
The equipment warranty shall constitute the sole and exclusive remedy of any Buyer
of Seller equipment and the sole and exclusive liability of the Seller, its successors
or assigns, in connection with equipment purchased and in lieu of all other
warranties expressed implied or statutory, including, but not limited to, any implied
warranty of merchant ability or fitness and all other obligations or liabilities of seller,
its successors or assigns.
The equipment must be returned postage prepaid. Package it securely and insure it.
You will be charged for parts and labor if the warranty period has expired.
Returns and RMAs
If a CyberResearch product has been diagnosed as being non-functional, is visibly
damaged, or must be returned for any other reason, please call for an assigned
RMA number. The RMA number is a key piece of information that lets us track and
process returned merchandise with the fastest possible turnaround time.
PLEASE CALL FOR AN RMA NUMBER!
Packages returned without an RMA number will be refused!
In most cases, a returned package will be refused at the receiving dock if its
contents are not known. The RMA number allows us to reference the history of
returned products and determine if they are meeting your application’s requirements.
When you call customer service for your RMA number, you will be asked to provide
information about the product you are returning, your address, and a contact person
at your organization.
Please make sure that the RMA number is prominently
displayed on the outside of the box.
• Thank You •
CyberResearch, Inc.
25 Business Park Drive
Branford, CT USA
65
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com
®
CyberResearch Panel PCs
FPC 1502 Series
Intentionally Blank
66
©Copyright 2004 CyberResearch, Inc.
CyberResearch, Inc.
25 Business Park Drive
Branford, CT 06405 USA
P: (203) 483-8815; F: (203) 483-9024
www.cyberresearch.com